The design of responsive luminescent lanthanide probes and sensors

Intramolecular energy transfer and its influence on the overall quantum yields of Eu3+ and Tb3+ chelates with dimethyl(phenylsulfonyl)amidophosphate ligands

Lanthanide chelates with dimethyl(phenylsulfonyl)amidophosphate (labeled as HSP) and Lewis base ligands (bpy = 2,2;-bipyridine and phen = 1,10-phenanthroline) of formula Na[Ln(SP)4] (1Ln), [Ln(SP)3bpy] (2Ln); [Ln(SP)3phen] (3Ln) (Ln = Eu3+, Gd3+, Tb3+ and Lu3+) were obtained and characterized by the X-ray, photoluminescence spectroscopy at 293 and 77 K as well as by intrinsic (QLnLn) and overall (QLnL) luminescence quantum yields. These phosphors manifest a very strong emission after excitation in the UV range of the molecular singlet states (S1) and two of them have very high QLnL values (Eu3+ and Tb3+ chelates of the type 2Ln and 3Ln). The dynamics of the excited states are discussed based on the intramolecular energy transfer theory, considering the dipole-dipole, the dipole-multipole and the exchange mechanisms. From the calculated energy transfer rates, a rate equation model was constructed and, thus, the theoretical QLnL can be obtained. A good correlation between the experimentally determined and theoretically calculated QLnL values was achieved, with the triplet state (T1) playing a predominant role in the energy transfer process for Eu3+ compounds, while the sensitization for Tb3+ compounds is dominated by the energy transfer rates from the singlet state (S1).

Multiple pathways for lanthanide sensitization in self-assembled aqueous complexes

Lanthanide photoluminescence (PL) emission has attracted much attention for technological and bioimaging applications because of its particularly interesting features, such as narrow emission bands and very long PL lifetimes. However, this emission process necessitates a preceding step of energy transfer from suitable antennas. While biocompatible applications require luminophores that are stable in aqueous media, most lanthanide-based emitters are quenched by water molecules. Previously, we described a small luminophore, 8-methoxy-2-oxo-1,2,4,5-tetrahydrocyclopenta[de]quinoline-3-phosphonic acid (PAnt), which is capable of dynamically coordinating with Tb(III) and Eu(III), and its exchangeable behavior improved their performance in PL lifetime imaging microscopy (PLIM) compared with conventional lanthanide cryptate imaging agents. Herein, we report an in-depth photophysical and time-dependent density functional theory (TD-DFT) computational study that reveals different sensitization mechanisms for Eu(III) and Tb(III) in stable complexes formed in water. Understanding this unique behavior in aqueous media enables the exploration of different applications in bioimaging or novel emitting materials.

A nanomaterial-independent and fluorescent immunoassay based on Eu-micelles for rapid and sensitive detection of fluoroquinolones in chicken

Fluorescent nanoprobes are widely applied in innovate enzyme-linked immunosorbent assays (ELISA) for detection of fluoroquinolones (FQs) residue in foodstuffs. Nevertheless, the complicated synthesis of nanoprobes hampers their practical applications. Herein, a nanomaterial-independent and fluorescent ELISA for sensitive detection of FQs is developed using the Eu-micelles as signal probe. Non-nanostructured Eu-micelles with high quantum yield and stability are facilely synthesized through the assembly of Eu3+ and ligands. Alkaline phosphatase catalyzes hydrolysis of 4-nitrophenyl phosphate to 4-nitrophenol. The fluorescent Eu-micelles can be readily quenched by 4-nitrophenol via static quenching. The signal generation mechanism integrates well with conventional ELISA systems. The established fluorescent ELISA achieves sensitive detection of FQs with a limit of detection of 0.03 μg/kg. The validation results from LC-MS show that the fluorescent ELISA exhibits good accuracy and recoveries. Our study presents a nanomaterial-independent strategy for developing the rapid immunoassay for FQs, which holds good promise for practical applications.

Distortion Engineering: A Strategy to Modulate Molecular Upconversion with Molecular Cluster-Aggregates

The rational engineering of molecules is a powerful chemistry tool of pivotal importance in the fields of molecular magnetism and luminescence. Hence, systems that can be modulated via molecular engineering and composition control are expected to present extra versatility regarding the tunability of their properties. This is the case with molecular cluster aggregates (MCAs), high nuclearity molecular compounds. Herein, we demonstrate how the union of both strategies, namely, composition control and molecular engineering, can be employed to enhance molecular upconversion in MCAs. This was achieved by doping a {Gd8Er2Yb10} MCA with CeIII ions. By replacement of the optically silent GdIII ions with CeIII, the upconversion mechanism is modified due to CeIII-mediated cross-relaxation. In addition to this effect, we could also engineer the degree of metal site distortion due to the larger size of CeIII ions, relaxing the selection rules and impacting the upconversion quantum yield and luminescent thermometry. Opto-structural correlations demonstrate that the presented molecular engineering strategy can be used to enhance the performance of molecular upconverters.

Luminescent lanthanide metallopeptides for biomolecule sensing and cellular imaging

Lanthanide ions display unique luminescent properties that make them particularly attractive for the development of bioprobes, including long-lived excited states that allow the implementation of time-gated experiments and the elimination of background fluorescence associated with biological media, as well as narrow emission bands in comparison with typical organic fluorophores, which allow ratiometric and multiplex assays. These luminescent complexes can be combined with peptide ligands to endow them with additional targeting, responsiveness, and selectivity, thus multiplying the opportunities for creative probe design. In this feature article we will present some of the main strategies that researchers have used to develop lanthanide metallopeptide probes for the detection of proteins and nucleic acids, as well as for monitoring enzymatic activity and cellular imaging.

Elucidating the Mechanism of Efficient Eu(III) and Yb(III) Sensitisation from a Re(I) Tetrazolato Triangular Assembly

The reaction of Re(CO)5Br with deprotonated 1H-(5-(2,2':6',2''-terpyridine)pyrid-2-yl)tetrazole yields a triangular assembly formed by tricarbonyl Re(I) vertices. Photophysical measurements reveal blue-green emission with a maximum at 520 nm, 32 % quantum yield, and 2430 ns long-lived excited state decay lifetime in deaerated dichloromethane solution. Coordination of lanthanoid ions to the terpyridine units red-shifts the emission to 570 nm and also reveals efficient (90 %) and fast sensitisation of both Eu(III) and Yb(III) at room temperature, with a similar rate constant kET on the order of 107 s-1. Efficient sensitisation of Eu(III) from Re(I) is unprecedented, especially when considering the close proximity in energy between the donor and acceptor excited states. On the other hand, comparative measurements at 77 K reveal that energy transfer to Yb(III) is two orders of magnitude slower than that to Eu(III). A two-step mechanism of sensitisation is therefore proposed, whereby the rate-determining step is a thermally activated energy transfer step between the Re(I) centre and the terpyridine functionality, followed by rapid energy transfer to the respective Ln(III) excited states. At 77 K, the direct Re(I) to Eu(III) energy transfer seems to proceed via a ligand-mediated superexchange Dexter-type mechanism.

Triple-Decker Hexaazamacrocyclic Lanthanide(III) Complexes: Structure, Magnetic Properties, and Temperature-Dependent Luminescence

The reaction of fluoride anions with mononuclear rare-earth(III) complexes of the hexaazamacrocycle derived from 2,6-diformylpyridine and ethylenediamine affords trinuclear coordination compounds [Ln3L3(μ2-F)4(NO3)2](NO3)3. The X-ray crystal structures of these complexes show triplex cationic complexes where the three roughly parallel macrocyclic lanthanide(III) units are linked by bis-μ2-F bridges. The detailed analysis of the photophysical properties of the [Eu3L3(μ2-F)4(NO3)2](NO3)3·2H2O and [Tb3L3(μ2-F)4(NO3)2](NO3)3·3H2O complexes reveals different temperature dependence of luminescence intensity and luminescence decay time of the Eu(III) and Tb(III) derivatives. The spectra of mixed species of average composition [Eu1.5Tb1.5L3(μ2-F)4(NO3)2](NO3)3·3H2O are in accordance with the ratiometric luminescent thermometer behavior. Measurements of the direct-current (dc) magnetic susceptibility of the [Dy3L3(μ2-F)4(NO3)2](NO3)3·2H2O complex indicate possible ferromagnetic interactions between the Dy(III) ions. Alternating current (ac) susceptibility measurements of this complex indicate single-molecule magnet behavior in zero dc field with magnetic relaxation dominated by Orbach mechanism and an effective energy barrier Ueff = 12.3 cm-1 (17.7 K) with a pre-exponential relaxation time, τ0 of 7.3 × 10-6 s. A similar reaction of mononuclear macrocyclic complexes with a higher number of fluoride equivalents results in polymeric {[Ln3L3(μ2-F)5](NO3)4}n complexes. The X-ray crystal structure of the Nd(III) derivative of this type shows trinuclear units that are additionally linked by single fluoride bridges to form a linear coordination polymer.

Mechanistic Investigation of Sensitized Europium Luminescence: Excited State Dynamics and Luminescence Lifetime Thermometry

Fluorescent nanothermometers based on thermal-dependent lifetime have a significant advantage in biological imaging owing to their immunity toward scattering, absorption, and autofluorescence. In this study, we present the first example of a water-soluble europium complex ([L1Eu]-) that exhibits high sensitivity (1.2% K-1 at 298 K) based on a temperature-dependent lifetime in the millisecond time range. This complex and its analogues show considerable potential for organelle imaging. The mechanism behind this thermal-sensitive behavior has been extensively investigated using transient absorption spectroscopy and variable temperature time-resolved luminescence methods. A highly efficient ligand sensitization process and a thermally activated back energy transfer process have been demonstrated. This study bridges the gap in small molecule thermometers with lifetimes longer than 1 ms and provides guidance in ligand design for metal coordination complex thermometers.

Wearable, Biocompatible, and Dual-Emission Ocular Multisensor Patch for Continuous Profiling of Fluoroquinolone Antibiotics in Tears

The abuse or misuse of antibiotics in clinical and agricultural settings severely endangers human health and ecosystems, which has raised profound concerns for public health worldwide. Trace detection and reliable discrimination of commonly used fluoroquinolone (FQ) antibiotics and their analogues have consequently become urgent to guide the rational use of antibiotic medicines and deliver efficient treatments for associated diseases. Herein, we report a wearable eye patch integrated with a quadruplex nanosensor chip for noninvasive detection and discrimination of primary FQ antibiotics in tears during routine eyedrop treatment. A set of dual-mode fluorescent nanoprobes of red- or green-emitting CdTe quantum dots integrated with lanthanide ions and a sensitizer, adenosine monophosphate, were constructed to provide an enhanced fluorescence up to 45-fold and nanomolar sensitivity toward major FQs owing to the aggregation-regulated antenna effect. The aggregation-driven, CdTe-Ln(III)-based microfluidic sensor chip is highly specific to FQ antibiotics against other non-FQ counterparts or biomolecular interfering species and is able to accurately discriminate nine types of FQ or non-FQ eyedrop suspensions using linear discriminant analysis. The prototyped wearable sensing detector has proven to be biocompatible and nontoxic to human tissues, which integrates the entire optical imaging modules into a miniaturized, smartphone-based platform for field use and reduces the overall assay time to ∼5 min. The practicability of the wearable eye patch was demonstrated through accurate quantification of antibiotics in a bactericidal event and the continuous profiling of FQ residues in tears after using a typical prescription antibiotic eyedrop. This technology provides a useful supplement to the toolbox for on-site and real-time examination and regulation of inappropriate daily drug use that might potentially lead to long-term antibiotic abuse and has great implications in advancing personal healthcare techniques for the regulation of daily medication therapy.

Efficient cytosolic delivery of luminescent lanthanide bioprobes in live cells for two-photon microscopy

Lanthanide(iii) (Ln3+) complexes have desirable photophysical properties for optical bioimaging. However, despite their advantages over organic dyes, their use for microscopy imaging is limited by the high-energy UV excitation they require and their poor ability to cross the cell membrane and reach the cytosol. Here we describe a novel family of lanthanide-based luminescent probes, termed dTAT[Ln·L], based on (i) a DOTA-like chelator with a picolinate moiety, (ii) a two-photon absorbing antenna to shift the excitation to the near infrared and (ii) a dimeric TAT cell-penetrating peptide for cytosolic delivery. Several Tb3+ and Eu3+ probes were prepared and characterized. Two-photon microscopy of live cells was attempted using a commercial microscope with the three probes showing the highest quantum yields (>0.15). A diffuse Ln3+ emission was detected in most cells, which is characteristic of cytosolic delivery of the Ln3+ complex. The cytotoxicity of these three probes was evaluated and the IC50 ranged from 7 μM to >50 μM. The addition of a single positive or negative charge to the antenna of the most cytotoxic compound was sufficient to lower significantly or suppress its toxicity under the conditions used for two-photon microscopy. Therefore, the design reported here provides excellent lanthanide-based probes for two-photon microscopy of living cells.

Dynamics of Coordinated Phosphonate Group Directly Observed by 17O-NMR in Lanthanide(iii) Complexes of a Mono(ethyl phosphonate) DOTA Analogue

Biological phosphates can coordinate metal ions and their complexes are common in living systems. Dynamics of mutual oxygen atom exchange in the tetrahedral group in complexes has not been investigated. Here, we present a direct experimental proof of exchange ("phosphonate rotation") in model Ln(III) complexes of monophosphonate H4dota analogue which alters phosphorus atom chirality of coordinated phosphonate monoester. Combination of macrocycle-based isomerism with P-based chirality leads to several diastereoisomers. (Non)-coordinated oxygen atoms were distinguished through 17O-labelled phosphonate group and their mutual exchange was followed by various NMR techniques and DFT calculations. The process is sterically demanding and occurs through bulky bidentate (κ2-PO2)- coordination and was observed only in twisted-square antiprism (TSA) diastereoisomer of large Ln(III) ions. Its energy demands increase for smaller Ln(III) ions (298ΔG≠(exp./DFT)=51.8/52.1 and 61.0/71.5 kJ mol-1 for La(III) and Eu(III), respectively). These results are helpful in design of such complexes as MRI CA and for protein paramagnetic NMR probes. It demonstrates usefulness of 17O NMR to study solution dynamics in complexes involving phosphorus acid derivatives and it may inspire use of this method to study dynamics of phosphoric acid derivatives (as e. g. phosphorus acid-based inhibitors of metalloenzymes) in different areas of chemistry.

Terpyridyl-Imidazole Based Ligand Coordinated to Ln(Hexafluoroacetyl acetonate)3 Core: Synthesis, Structural Characterization, Luminescence Properties, and Thermosensing Behaviors in Solution and PMMA Film

A new array of ternary lanthanide complexes of the form [Ln(hfa)3(tpy-HImzphen)] have been synthesized and thoroughly characterized wherein Ln = LaIII (1), EuIII (2), SmIII (3), and TbIII (4); hfa = hexafluoroacetylacetonate; and tpy-HImzphen = 2-(4-[2,2':6',2″]terpyridin-4'-yl-phenyl)-1H-phenanthro[9,10-d]imidazole. Incorporation of tpy-HImzphen onto the Ln-hfa moiety induced a bathochromic shift of the absorption window of the complexes into the visible region. Extensive investigations of the luminescence characteristics have been conducted both at RT and at 77 K to understand the deactivation pathways of the complexes. Both steady-state and time-resolved emission spectral behaviors indicate four distinctive behaviors upon incorporation of tpy-HImzphen onto the lanthanide core, viz., a huge red-shift of the ligand-centered peak for LaIII; almost complete energy transfer for EuIII; very little energy transfer for SmIII, while reverse energy transfer in the case of TbIII. In addition, the EuIII-complex exhibits its excellence in luminescence thermometry in the solution state as well as in poly(methyl methacrylate) (PMMA) thin films. The thermosensitive luminescence response in solution was further utilized to mimic set-reset flip-flop logic operation. A plausible energy transfer scheme has been devised to explain dissimilar luminescence behaviors in the complexes. The role of LMCT was also considered for the observed thermosensing property of the Eu(III) complex.

Highly Efficient and Thermally Durable Luminescence of 1D Eu3+ Coordination Polymers with Arsenic Bridging Ligands

In this work, bisarsine oxides were evaluated as novel bridging ligands, aiming to develop practical and efficient luminescent lanthanide coordination polymers. We have synthesized one-dimensional (1D) Eu3+ coordination polymers that incorporate bisarsine oxide bridging ligands and hexafluoroacetylacetonate anions. These polymers exhibited a denser packing of chains compared to analogous polymers bridged with bisphosphine oxides. The coordination polymers demonstrated exceptional thermal stability and substantial emission quantum yields. Additionally, the bisarsine oxides induced a pronounced polarization effect, facilitating a sensitive electric dipole transition that yields considerably narrow band red emission. Remarkably, the Eu3+ coordination polymers with bisarsine oxides maintained intense emission even at 550 K. A distinctive feature of these polymers is their heating-induced emission enhancement observed when the temperature was increased from 300 K to 400 K.

Synthesis and Characterization of Multiple Stimuli-Responsive Fluorescent Polymer Hydrogels Based on Terpyridine and N-Isopropylacrylamide

A series of stimuli-responsive fluorescent hydrogels were successfully synthesized via micelle radical copolymerization of hydrophilic acrylamide (AM), hydrophobic chromophore terpyridine-based monomer (TPY), and N-isopropylacrylamide (NIPAM). These hydrogels presented blue emissions (423-440 nm) under room temperature, which is caused by the π-π* transition of the conjugated structures. Once the ambient temperature was increased to 55 °C, the fluorescence color changed from blue (430 nm) to pink (575 nm) within 10 min, subsequently to yellow (535 nm), and eventually back to pink. The thermal-responsive properties are attributed to the transition of the TPY units from unimer to dimer aggregation via the intermolecular charge transfer complex at high temperatures. The hydrogels showed pH-responsive properties. The emission peak of the hydrogel exhibited a blue shift of ~54 nm from neuter conditions to acidic conditions, while a 6 nm red shift to an alkaline environment was observed. The hydrogels demonstrated an obvious change in fluorescence intensity and wavelength upon adding different metal ions, which is caused by the coordination between the terpyridine units incorporated on the backbones and the metal ions. As a consequence, the hydrogels presented a sharp quenching fluorescence interaction with Fe2+, Fe3+, Cu2+, Hg2+, Ni2+, and Co2+, while it exhibited an enhanced fluorescence intensity interaction with Sn2+, Cd2+, and Zn2+. The microstructural, mechanical, and rheological properties of these luminescent hydrogels have been systematically investigated.

Investigation of Ln3+ complexation by a DOTA derivative substituted by an imidazothiadiazole: synthesis, solution structure, luminescence and relaxation properties

We investigated the coordination properties of original macrocyclic Ln3+ complexes comprising an imidazothiadiazole heterocycle. The thermodynamic stability of the Gd3+ complex was determined by a combination of potentiometric and photophysical measurements. The kinetic inertness was assessed in highly acidic media. The solution structure of the Ln3+ complex was unambiguously determined by a set of photophysical measurements and 1H, 13C, 89Y NMR data in combination with DFT calculations, which proved coordination of the heterocycle to Ln3+. The ability of the imidazothiadiazole moiety to sensitize Tb3+ luminescence was investigated. Finally, the relaxation properties were investigated by recording 1H nuclear magnetic relaxation dispersion (NMRD) profiles and 17O measurements. The water exchange rate is similar to that of GdDOTA as the less negative charge of the ligand is compensated for by the presence of a bulky heterocycle. Relaxivity is constant over a large range of pH values, demonstrating the favorable properties of the complex for imaging purposes.

Effective photosensitized emission of a Tb(III) complex using a β-diketonate photosensitizer and an oxygen barrier system in a thermally populated triplet state

Photosensitizer design of luminescent terbium (Tb(III)) complexes with narrow bandwidths is important for advancing luminescent materials. In this study, we report an effective photosensitizer model in a thermally populated lowest excited triplet (T1) state during Tb(III) emission. The Tb(III) complex comprises a Tb(III) ion (serving as an emission center), hexafluoroacetylacetonates (acting as photosensitizer ligands), and bulky cyclohexyl group-attached phosphine-oxide-type ligands (functioning as an oxygen barrier system). Emission properties including emission and excitation spectra, ligand-excited emission quantum yields, and emission lifetimes were evaluated in the absence and presence of oxygen. Coordination geometry structures were determined through analysing single-crystal structures. The electronic structure based on 4f-orbitals was estimated from radiative rate constants and quantum chemical calculations. The bulky phosphine oxide ligand not only provides an oxygen barrier system but also induces an electronic structural modulation based on 4f-orbitals, allowing for effective photosensitized Tb(III) emission in a thermally populated ligand T1 state in air.

Optical Phenomena in Molecule-Based Magnetic Materials

Since the last century, we have witnessed the development of molecular magnetism which deals with magnetic materials based on molecular species, i.e., organic radicals and metal complexes. Among them, the broadest attention was devoted to molecule-based ferro-/ferrimagnets, spin transition materials, including those exploring electron transfer, molecular nanomagnets, such as single-molecule magnets (SMMs), molecular qubits, and stimuli-responsive magnetic materials. Their physical properties open the application horizons in sensors, data storage, spintronics, and quantum computation. It was found that various optical phenomena, such as thermochromism, photoswitching of magnetic and optical characteristics, luminescence, nonlinear optical and chiroptical effects, as well as optical responsivity to external stimuli, can be implemented into molecule-based magnetic materials. Moreover, the fruitful interactions of these optical effects with magnetism in molecule-based materials can provide new physical cross-effects and multifunctionality, enriching the applications in optical, electronic, and magnetic devices. This Review aims to show the scope of optical phenomena generated in molecule-based magnetic materials, including the recent advances in such areas as high-temperature photomagnetism, optical thermometry utilizing SMMs, optical addressability of molecular qubits, magneto-chiral dichroism, and opto-magneto-electric multifunctionality. These findings are discussed in the context of the types of optical phenomena accessible for various classes of molecule-based magnetic materials.

Augmentation of NIR Circularly Polarized Luminescence Activity in Shibasaki-Type Lanthanide Complexes Supported by the Spirane Sphenol

We report two new circularly polarized luminescence (CPL)-active lanthanide complexes emissive in the near-infrared (NIR) region; using sphenol as a supporting ligand, we provide the first reported example of an NIR-emissive lanthanide complex supported by a chiral spirane. Inclusion of a quaternary carbon to impart axial chirality results in dramatic augmentation of the CPL strength of the resultant sphenolate complexes (glum ≤ 0.77 for [(sphenol)3ErNa3(thf)6]) compared to that of their contemporary biaryl-based axially chiral analogues (glum ≤ 0.47 for [(binol)3ErNa3(thf)6]). Despite similar structural parameters, the rigid spiro carbon of sphenol enables the strongest dissymmetry factors observed to date from Shibasaki-type complexes for both Yb and Er. We also demonstrate the sensitivity of the reported chiroptical measurements to small variations in instrumental parameters, such as bandpass, and suggest a standardized method or at least that additional detail should be included in future reports to allow for direct comparisons between newly published CPL emitters.

Facile Peptide Macrocyclization and Multifunctionalization via Cyclen Installation

Cyclen-peptide bioconjugates are usually prepared in multiple steps that require individual preparation and purification of the cyclic peptide and hydrophilic cyclen derivatives. An efficient strategy is discovered for peptide cyclization and functionalization toward lanthanide probe via three components intermolecular crosslinking on solid-phase peptide synthesis with high conversion yield. Multifunctionality can be conferred by introducing different modular parts or/and metal ions on the cyclen-embedded cyclopeptide. As a proof-of-concept, a luminescent Eu3+ complex and a Gd3+-based contrasting agent for in vitro optical imaging and in vivo magnetic resonance imaging, respectively, are demonstrated through utilizing this preparation of cyclen-embedded cyclic arginylglycylaspartic acid (RGD) peptide.

Aggregation induced emission dynamic chiral europium(III) complexes with excellent circularly polarized luminescence and smart sensors

The synthesis of dynamic chiral lanthanide complex emitters has always been difficult. Herein, we report three pairs of dynamic chiral EuIII complex emitters (R/S-Eu-R-1, R = Et/Me; R/S-Eu-Et-2) with aggregation-induced emission. In the molecular state, these EuIII complexes have almost no obvious emission, while in the aggregate state, they greatly enhance the EuIII emission through restriction of intramolecular rotation and restriction of intramolecular vibration. The asymmetry factor and the circularly polarized luminescence brightness are as high as 0.64 (5D0 → 7F1) and 2429 M-1cm-1 of R-Eu-Et-1, achieving a rare double improvement. R-Eu-Et-1/2 exhibit excellent sensing properties for low concentrations of CuII ions, and their detection limits are as low as 2.55 and 4.44 nM, respectively. Dynamic EuIII complexes are constructed by using chiral ligands with rotor structures or vibration units, an approach that opens a door for the construction of dynamic chiral luminescent materials.

Current Development of Lanthanide Complexes for Biomedical Applications

Luminescent molecule-based bioimaging system is widely used for precise localization and distinction of cancer/tumor cells. Luminescent lanthanide (Ln(III)) complexes offer long-lived (sub-millisecond time scale) and sharp (FWHM <10 nm) emission, arising from the forbidden 4f-4f electronic transitions. Luminescent Ln(III) complex-based bioimaging has emerged as a promising option for both in vitro and in vivo visualizations. In this mini-review, the historical development and recent significant progress of luminescent Ln(III) probes for bioapplications are introduced. The recent studies are mainly focused on three points: (i) the structural modifications of Ln(III) complexes in both macrocyclic and small ligands, (ii) the acquirement of high resolution luminescence images of cancer/tumor cells and (iii) the constructions of ratiometric biosensors. Furthermore, our recent study is explained as a new Cancer GPS (cancer grade probing for determining tumor grade through photophysical property analyses of intracellular Eu(III) complex.

A chiral bipolar host for efficient solution-processed circularly polarized OLEDs via a chirality energy transfer process

Chiral bipolar hosts of (R/S)-L-2mCPCN are synthesized, which show high singlet/triplet energy levels and clear circularly polarized luminescence. Employing racemic phosphorescent and TADF materials as emitting guest molecules, solution-processable CP-OLEDs based on such chiral hosts are obtained with an EQEmax of 10.7% and |gEL| values of 5.0 × 10-3.

Lanthanide Complex for Single-Molecule Fluorescent in Situ Hybridization and Background-Free Imaging

Traditional single-molecule fluorescence in situ hybridization (smFISH) methods for RNA detection often face sensitivity challenges due to the low fluorescence intensity of the probe. Also, short-lived autofluorescence complicates obtaining clear signals from tissue sections. In response, we have developed an smFISH probe using highly grafted lanthanide complexes to address both concentration quenching and autofluorescence background. Our approach involves an oligo PCR incorporating azide-dUTP, enabling conjugation with lanthanide complexes. This method has proven to be stable, convenient, and cost-effective. Notably, for the mRNA detection in SKBR3 cells, the lanthanide probe group exhibited 2.5 times higher luminescence intensity and detected 3 times more signal points in cells compared with the Cy3 group. Furthermore, we successfully applied the probe to image HER2 mRNA molecules in breast cancer FFPE tissue sections, achieving a 2.7-fold improvement in sensitivity compared to Cy3-based probes. These results emphasize the potential of time-resolved smFISH as a highly sensitive method for nucleic acid detection, free of background fluorescence interference.

Luminescent lanthanide complexes based on 4,5-di(3,5-dicarboxylphenoxy)phthalic acid as enhanced fluorescence probes for highly selective detection of lead(II) ions in water

Six novel lanthanide complexes ([Nd2(L)(H2O)6]n·4.58n(H2O) (1), [Ln(H3L)(H2O)]n·0.5n(H2O), Ln = Sm (2), Eu (3), Gd (4), Tb (5), Eu0.18Gd0.62Tb0.20 (6)) have been hydrothermally synthesized based on the ligand 4,5-di(3,5-dicarboxylphenoxy)phthalic acid (H6L). Single crystal X-ray diffraction reveals that complexes 1-6 are 2D structures, where 2-6 are isomorphic. Complexes 3 and 5 exhibit the characteristic fluorescence of Eu(III) and Tb(III) ions respectively, while complex 4 shows blue-green light emission based on the ligand. In particular, the ternary Eu/Gd/Tb complex 6 shows white light emission with a CIE (Commission International del'Eclairage) chromaticity coordinate of (0.330, 0.339) and hence close to pure white light emission. Moreover, complexes 3 and 5 display specific fluorescence-enhanced detection performance for Pb2+ ions: The interaction between Pb2+ ions and the ligand enhances the charge transfer efficiency between the ligand and the Eu(III) and Tb(III) ions and thus leads to fluorescence enhancement of complexes 3 and 5. More importantly, complex 3 exhibits the lowest detection limit of 4.72 nM for Pb2+ ions among the existing complex fluorescent probes. In addition, both complexes 3 and 5 show good performance for recycling and for the detection of Pb2+ in real water samples.

Utilizing a Paper-Based Platform for Oilfield Applications: Time-Resolved Fluorescence Imaging and Detection of Interwell Chemical Tracers

Chemical tracers are indispensable tools for enhancing reservoir characterization and optimizing production processes in the oil and gas industry. Particularly, interwell water tracers provide key data for efficient water flood management and the improvement of production rates. However, the analysis of these water tracers within reservoir fluids is challenging, requiring laborious separation and extraction steps that often rely on complex instruments and skilled operators. Real-time analysis is especially problematic in remote areas with limited access to well-equipped laboratories. To address these challenges, we introduce a paper-based platform for the time-resolved fluorescence detection of dipicolinic acid (DPA) tracers complexed with terbium ion (Tb3+). Our innovation is driven by the need to simplify tracer analysis, make it portable, and enhance accessibility for oilfield applications. By leveraging the unique properties of cyclen-based macrocyclic ligands, we have achieved the stable and sensitive immobilization of Tb3+ on quartz microfilter paper, eliminating the need for extensive laboratory-based procedures. We achieve the stable and sensitive immobilization of Tb3+ on quartz microfilter paper by leveraging the unique properties of cyclen-based macrocyclic ligands. This innovation enables the formation of highly fluorescent, oil-blind, and optically detectable DPA-Tb3+ complexes at the paper surface. We visualize and capture these fluorescence signals using an intensified charge-coupled device camera via time gating, effectively suppressing undesirable fluorescence originating from crude oil. The quantification of DPA concentrations is achievable down to 158 ppb (9.45 × 10-7 M), as confirmed through time-resolved fluorescence microplate reader measurements. We also demonstrate the practicality of our technology by detecting DPA tracers in the presence of crude oil contamination, a common challenge encountered in oil production wells.

Exchangeable Self-Assembled Lanthanide Antennas for PLIM Microscopy

Lanthanides have unique photoluminescence (PL) emission properties, including very long PL lifetimes. This makes them ideal for biological imaging applications, especially using PL lifetime imaging microscopy (PLIM). PLIM is an inherently multidimensional technique with exceptional advantages for quantitative biological imaging. Unfortunately, due to the required prolonged acquisitions times, photobleaching of lanthanide PL emission currently constitutes one of the main drawbacks of PLIM. In this study, we report a small aqueous-soluble, lanthanide antenna, 8-methoxy-2-oxo-1,2,4,5-tetrahydrocyclopenta[de]quinoline-3-phosphonic acid, PAnt, specifically designed to dynamically interact with lanthanide ions, serving as exchangeable dye aimed at mitigating photobleaching in PLIM microscopy in cellulo. Thus, self-assembled lanthanide complexes that may be photobleached during image acquisition are continuously replenished by intact lanthanide antennas from a large reservoir. Remarkably, our self-assembled lanthanide complex clearly demonstrated a significant reduction of PL photobleaching when compared to well-established lanthanide cryptates, used for bioimaging. This concept of exchangeable lanthanide antennas opens new possibilities for quantitative PLIM bioimaging.

Understanding Single-Molecule Magnet properties of lanthanide complexes from 4f orbital splitting

We present an approach for connecting the magnetic anisotropy of lanthanide mononuclear complexes with their f-orbital splitting for both idealized and real coordination environments. Our proposal is straightforward to apply and provides sensible estimations of the energy spacing of the ground multiplet for axial magnetic systems. This energy splitting controls Single-Molecule Magnet properties of lanthanide complexes, determining key parameters such as the demagnetization energy barrier (Ueff). Importantly, this approach is consistent with the current paradigm of oblate and prolate preferences for the distribution of the f-electron density, but delivers a finer description for ions belonging to the same group (e.g. the oblates TbIII and DyIII). The model provides simple explanations for some general trends observed experimentally (e.g. the low barriers for ErIII complexes in comparison to DyIII or the large barriers observed for cyclopentadienyl DyIII complexes in comparison with other ligands based on organometallic rings), contributing as a valuable tool to expand our description of ligand field effects in lanthanide-based SMMs.

Lanthanide-Complex-Enhanced Bioorthogonal Branched DNA Amplification

Fluorescence in situ hybridization (FISH) is a widely used technique for detecting intracellular nucleic acids. However, its effectiveness in detecting low-copy nucleic acids is limited due to its low fluorescence intensity and background autofluorescence. To address these challenges, we present here an approach of lanthanide-complex-enhanced bioorthogonal-branched DNA amplification (LEBODA) with high sensitivity for in situ nuclear acid detection in single cells. The approach capitalizes on two levels of signal amplification. First, it utilizes click chemistry to directly link a substantial number of bridge probes to target-recognizing probes, providing an initial boost in signal intensity. Second, it incorporates high-density lanthanide complexes into each bridge probe, enabling secondary amplifications. Compared to the traditional "double Z" probes used in the RNAscope method, LEBODA exhibits 4 times the single enhancement for RNA detection signal with the click chemistry approach. Using SARS-CoV-2 pseudovirus-infected HeLa cells, we demonstrate the superiority in the detection of viral-infected cells in rare populations as low as 20% infectious rate. More encouragingly, the LEBODA approach can be adapted for DNA-FISH and single-molecule RNA-FISH, as well as other hybridization-based signal amplification methods. This adaptability broadens the potential applications of LEBODA in the sensitive detection of biomolecules, indicating promising prospects for future research and practical use.

Structure-changeable luminescent Eu(III) complex as a human cancer grade probing system for brain tumor diagnosis

Accurate determination of human tumor malignancy is important for choosing efficient and safe therapies. Bioimaging technologies based on luminescent molecules are widely used to localize and distinguish active tumor cells. Here, we report a human cancer grade probing system (GPS) using a water-soluble and structure-changeable Eu(III) complex for the continuous detection of early human brain tumors of different malignancy grades. Time-dependent emission spectra of the Eu(III) complexes in various types of tumor cells were recorded. The radiative rate constants (kr), which depend on the geometry of the Eu(III) complex, were calculated from the emission spectra. The tendency of the kr values to vary depended on the tumor cells at different malignancy grades. Between T = 0 and T = 3 h of invasion, the kr values exhibited an increase of 4% in NHA/TS (benign grade II gliomas), 7% in NHA/TSR (malignant grade III gliomas), and 27% in NHA/TSRA (malignant grade IV gliomas). Tumor cells with high-grade malignancy exhibited a rapid upward trend in kr values. The cancer GPS employs Eu(III) emissions to provide a new diagnostic method for determining human brain tumor malignancy.

A terpyridyl-imidazole based europium tris-(β-diketonate) complex as an efficient molecular luminescent thermometer and single component white light emitter via synergy in energy transfer between ligands and Eu3

The thermosensing and thermochromic behavior of one of our recently reported terpyridyl-imidazole based ternary europium tris-(β-diketonate) complexes of the composition [Eu(tta)3(tpy-HImzphen)] (tta = 2-thenoyltrifluoroacetone and tpy-HImzphen = 2-(4-[2,2':6',2''] terpyridin-4'-yl-phenyl)-1H-phenanthro[9,10-d]imidazole) has been thoroughly investigated in this work. The said Eu(III) complex exhibits magnificent thermosensing as well as thermochromic properties and can be recommended as an excellent temperature sensor in a wide temperature domain of 273-343 K in terms of both emission intensity ratio (Sm = 5.78% K-1 at Tm = 343 K, δT = 0.012 K) and lifetime values (Sm = 3.36% K-1 at Tm = 333 K, δT = 0.009 K) or even in terms of its emitting color (red at 268 K, violet at 303 K, and blue at 343 K). Additionally, it displays remarkable solvent-induced luminescence behavior by displaying various emitting colors instead of its sole characteristic red emission upon varying the nature of the solvent. Finally, amalgamating these two features, we are able to attain white light emission (Commission Internationale de l'Eclairage coordinates: x = 0.34, y = 0.38) at 283 K from a single component. A plausible energy transfer mechanism has also been proposed in light of the existence of the ligand-to-metal charge transfer (LMCT) state as the quencher.

Detecting Fe(II) Spin-Crossover by Modulation of Appended Eu(III) Luminescence in a Single Molecule

Multifunctionality in spin-crossover (SCO) devices is limited to macroscopic or nanoscopic materials because of the need for long-range effects for inducing favorable cooperativity, efficient energy migration processes, and detectable magnetization transfer. The difficult reproducibility, control, and rational design of doped materials offer some place to SCO processes, modulating the optical properties of neighboring luminescent probes in single molecules. We report here on the combination of a [FeN6] chromophore, the SCO temperature and absorption spectra of which have been tuned to induce unprecedented room-temperature modulation of Eu(III)-based line-like luminescence in the molecular triple-helical [EuFe(L2)3]5+ complex in solution.

A dual encapsulation strategy to generate anion-responsive luminescent lanthanide hydrogels

We report a new method to generate ion-responsive luminescent hydrogels, involving encapsulation of a luminescent lanthanide probe within crosslinked amphiphilic polymer particles and subsequent entrapment within a hydrogel. The resulting hydrogels are capable of reversible bicarbonate sensing, exhibit no leaching, and can be tuned for a range of sensing applications.

Chiral TPE Foldamers in Macrocycles: Aggregation Enhanced Emission and Circularly Polarized Luminescence

Chiral macrocycles with circularly polarized luminescence (CPL) have attracted increasing attention due to the rigid structure, symmetrical chiral geometry and large luminescence dissymmetry factors (glum ). However, most chiral macrocycles are more emissive in solutions but have weakened fluorescence quantum yields (ΦF ) in aggregates, limiting their further application. In this paper, chiral macrocycle R/S-PhTPE was synthesized by combining chiral macrocycle architectonics with Z-o-phenyltetraphenylethylene (PhTPE) foldamer. Enhanced solution state emission and characteristic aggregation enhanced emission (AEE) effect can be observed for R/S-PhTPE due to the folded PhTPE conformation. Macrocycle immobilization and folded conformation endow PhTPE moiety with stable helical conformation. Most importantly, R/S-PhTPE exhibits opposite CPL signals compared with common chiral TPEs, demonstrating the evident impact of folded conformation. This work reports the first and deep insights into the chiroptical properties of chiral PhTPE foldamers, and will provide a new strategy to tune ΦF and CPL signals of AIE active chiral macrocycles.

Influence of symmetry on the magneto-optical properties of a bifunctional macrocyclic DyIII complex

In this work, a novel complex, [Dy(LPr)(NO3)2]·(H2O)·(NO3) (1), containing a highly distorted macrocyclic ligand (LPr) and weak axial anions (NO3-), was synthesized and characterized. Even though this coordination environment is not ideal for maximizing the magnetic anisotropy of a DyIII ion, a magneto-structural analysis reveals that the high distortion of the macrocycle promotes a disposition of the hard plane and easy axis opposite to the expected one. This results in a quite symmetrical environment which allows obtaining a field induced SMM behaviour. The magnetic relaxation properties of this complex were rationalized with the aid of ab initio multireference calculations. Moreover, 1 showed the characteristic emission bands of DyIII ion, indicating that the macrocyclic ligand acts as an efficient sensitizer in the energy transfer process to the emissive state of the DyIII ion. Due to the symmetric environment of 1, the Y/B intensity ratio (0.61) results in CIE coordinates (0.278; 0.314), close to those of the white light region. To gain further insight into the mechanism leading to the luminescence properties, ab initio calculations were performed to elucidate the key factors controlling the Y/B intensity ratio in this bifunctional complex.

Targeted, Molecular Europium(III) Probes Enable Luminescence-Guided Surgery and 1 Photon Post-Surgical Luminescence Microscopy of Solid Tumors

Discrete luminescent lanthanide complexes represent a potential alternative to organic chromophores due to their tunability of optical properties, insensitivity to photobleaching, and large pseudo-Stokes shifts. Previously, we demonstrated that the lack of depth penetration of UV excitation required to sensitize discrete terbium and europium complexes can be overcome using Cherenkov radiation emitted by clinically employed radioisotopes in situ. Here, we show that the second-generation europium complexes [Eu(III)(pcta-PEPA2)] and [Eu(III)(tacn-pic-PEPA2)] (Φ = 57% and 76%, respectively) lower the limit of detection (LoD) to 1 nmol in the presence of 10 μCi of Cherenkov emitting isotopes, 18F and 68Ga. Bifunctionalization provides access to cysteine-linked peptide conjugates with comparable brightness and LoD. The conjugate, [Eu(tacn-(pic-PSMA)-PEPA2)], displays high binding affinity to prostate-specific membrane antigen (PSMA)-expressing PC-3 prostate cancer cells in vitro and can be visualized in the membrane-bound state using confocal microscopy. Biodistribution studies with the [86Y][Y(III)(tacn-(pic-PSMA)-PEPA2)] analogue in a mouse xenograft model were employed to study pharmacokinetics. Systemic administration of the targeted Cherenkov emitter, [68Ga][Ga(III)(PSMA-617)], followed by intratumoral injection or topical application of 20 or 10 nmol [Eu(III)(tacn-(pic-PSMA)-PEPA2)], respectively, in live mice resulted in statistically significant signal enhancement using conventional small animal imaging (620 nm bandpass filter). Optical imaging informed successful tumor resection. Ex vivo imaging of the fixed tumor tissue with 1 and 2 photon excitation further reveals the accumulation of the administered Eu(III) complex in target tissues. This work represents a significant step toward the application of luminescent lanthanide complexes for optical imaging in a clinical setting.

Enhanced circularly polarized luminescence dissymmetry of [Ru(bpy)3]2+ complexes in a 3D chiral framework: a study of transparent thin films

Circularly polarized luminescence (CPL) plays an important role in the development of advanced optical devices. However, the design of CPL-active materials with a decent dissymmetry factor is still challenging. Here, we report CPL-active transparent thin films made from optically active ruthenium complexes [Ru(bpy)3]2+ embedded in chiral inorganic frameworks. Due to the unique chiral-in-chiral combination, the obtained [Ru(bpy)3][Zn2(C2O4)3] displays CPL activity with a dissymmetry factor of 5 × 10-3. The CPL measurements show that the luminescence dissymmetry factor can be effectively enhanced by one order of magnitude when an optically active [Ru(bpy)3]2+ complex is incorporated into a chiral inorganic framework compared to its solution form. This study not only emphasizes the potential of constructing CPL-active thin films with coordination polymers but also points out the importance of introducing extra chiral environment to improve the CPL effect.

Synthesis, characterization, luminescence properties and deciphering the role of a terpyridyl-imidazole based ligand in the dissimilar luminescence sensitization of ternary lanthanide(III) tris-(β-diketonate) complexes

We designed four ternary lanthanide tris-(β-diketonate) complexes of the form [Ln(tta)3(tpy-HImzphen)], where Ln = LaIII, EuIII, SmIII and TbIII; tta = (2-theonyltrifluoroacetonate) and tpy-HImzphen = 2-(4-[2,2':6',2'']terpyridin-4'-yl-phenyl)-1H-phenanthro[9,10-d]imidazole. All the complexes have been thoroughly characterized by standard analytical tools and spectroscopic techniques including single crystal X-ray diffraction. In situ generation of the complexes was also monitored via absorption and emission spectroscopy upon incremental addition of the respective lanthanide precursor {Ln(tta)3(H2O)2} to the dichloromethane solution of the terpyridyl-imidazole ligand. The photophysical behaviors of all the complexes were thoroughly investigated via absorption and both steady-state and time-resolved emission spectroscopic techniques. The emission spectral measurements were carried out at both room temperature and 77 K to understand the deactivation dynamics of the excited states and elucidate the distinctive luminescence responses from the four lanthanide metal ions owing to the introduction of the terpyridyl-based ancillary ligand.

Luminescent lanthanide probes for cations and anions: Promises, compromises, and caveats

The long luminescence lifetimes and sharp emission bands of luminescent lanthanide complexes have long been recognized as invaluable strengths for sensing and imaging in complex aqueous biological or environmental media. Herein we discuss the recent developments of these probes for sensing metal ions and, increasingly, anions. Underappreciated in the field, buffers and metal hydrolysis influence the response of many responsive lanthanide probes. The inherent complexities arising from these interactions are further discussed.

Composition Control in Molecular Cluster-Aggregates: A Toolbox for Optical Output Tunability via Energy Transfer Pathways

Composition control is a powerful tool for obtaining high-performance lanthanide (Ln) luminescent materials with adjustable optical outputs. This strategy is well-established for hierarchically structured nanoparticles, but it is rarely applied to molecular compounds due to the limited number of metal centers within a single unit. In this work, we present a series of molecular cluster-aggregates (MCAs) with an icosanuclear core {Ln2Eu2Tb16} (Ln = Ce, Pr, Nd, Sm, Gd, Dy, Ho, Er, Tm, and Yb) in which we explore composition control, akin to nanoparticles, to modulate the optical output. More specifically, we target to understand how the presence of a third LnIII doping ion would impact the well-known TbIII → EuIII energy transfer and the ratiometric optical thermometry performance based on the TbIII/EuIII pair. Photophysical properties at room and at varying temperatures were investigated. Based on experimental data and well-established intrinsic features, such as spin-orbit coupling strength and LnIII 4f energy levels' structure, we discuss the possible luminescent processes present in each MCA and provide insight into qualitative trends that can be rationally correlated throughout the series.

Development of water-dispersible Dy(III)-based organic framework as a fluorescent and electrochemical probe for quantitative detection of tannic acid in real alcoholic and fruit beverages

Tannic acid (TA) is a water-soluble polyphenol and used in beverages, medical fields as clarifying and additive agents. In daily life, TA is unavoidable, and excessive consumption of tannin containing foods can harm health. Thus, rapid and sensitive quantification is highly necessary. Herein, an eco-friendly fluorometric and electrochemical sensing of TA was developed based on a dysprosium(III)-metal-organic framework (Dy(III)-MOF). An aqueous dispersion of Dy(III)-MOF exhibits strong dual emissions at 479 and 572 nm with an excitation at 272 nm, due to the 4f-4f electronic transition and "antenna effect". Chromophore site of the functional ligand, and Dy(III) ion could potentially serve as a sensing probe for TA via quenching (fluorescence). The fluorometric sensor worked well in a wide linear range concentrations from 0.02 to 25 μM with a limit of detection (LOD) of 0.0053 μM. Secondly, the cyclic voltammetric of TA at Dy(III)-MOF modified screen-printed carbon electrode (SPCE) has been investigated. The Dy(III)-MOF/SPCE showed an anodic peak signal at +0.22 V with a five-fold stronger current than the control electrode surface. Under optimized sensing parameters, the Dy(III)-MOF/SPCE delivered wide linear concentrations from 0.01 to 200 μM with a LOD of 0.0023 μM (S/N = 3). Accessibility of real practical samples in alcoholic and juice-based beverages were quantified, resulting in superior recovery rates (98.13-99.53%), F-test, and t-test confirmed high reliability (<95% confidence level (n = 3)). Finally, practicability result of the electrochemical method was validated by fluorometric with a relative standard deviation (RSD) of 0.18-0.46 ± 0.17% (n = 3). The designed probe has proven to be a key candidate for the accurate analysis of TA in beverage samples to ensure food quality.

Molecular Properties of 3d and 4f Coordination Compounds Deciphered by Raman Optical Activity Spectroscopy

Molecular properties of coordination compounds can be efficiently studied by vibrational spectroscopy. The scope of Raman spectroscopy has been greatly enhanced by the introduction of Raman optical activity (ROA) sensitive to chirality. The present review describes some of its recent applications to study the coordination compounds. 3d and 4f metal complexes often absorb the excitation light, or exhibit luminescence. Therefore, effects caused in ROA spectra by electronic circular dichroism (ECD) and circularly polarized luminescence (CPL) must be taken into consideration.In 3d metal complexes ECD and circularly-polarized Raman scattering compete with the resonance ROA (RROA) signal. Pure RROA spectrum can thus be obtained by subtracting the so-called ECD-Raman component. CPL is frequently encountered in 4f systems. While it can mask the ROA spectra, it is useful to study molecular structure. These electronic effects can be reduced by using near-infrared excitation although vibrational ROA signal is much weaker compared to the usual green laser excitation scenario. The ROA methodology is thus complex, but capable of providing unique information about the molecules of interests and their interaction with light.

Rational Loading of Linear Multi-Site Receptors with Functional Lanthanide Containers: The Missing Link between Oligomers and Polymers

Although metal-containing organic polymers are becoming essential for modern applications in lighting, catalysis, and electronic devices, very little is known about their controlled metallic loading, which mainly limits their design to empirical mixing followed by characterization and often hampers rational developments. Focusing on the appealing optical and magnetic properties of 4f-block cations, the host-guest reactions leading to linear lanthanidopolymers already display some unexpected dependence of the binding-site affinities on the length of the organic polymer backbone: a drift usually, and erroneously, assigned to intersite cooperativity. Taking advantage of the parameters obtained for the stepwise thermodynamic loading of a series of rigid linear multi-tridentate organic receptors with increasing length, N = 1 (monomer L1), N = 2 (dimer L2), and N = 3 (trimer L3), with [Ln(hfa)3] containers in solution (Ln = trivalent lanthanide cations, hfa- = 1,1,1,5,5,5-hexafluoro-pentane-2,4-dione anion), it is demonstrated here that the site-binding model, based on the Potts-Ising approach, successfully predicts the binding properties of the novel soluble polymer P2N made up of nine successive binding units . An in-depth examination of the photophysical properties of these lanthanidopolymers shows impressive UV→vis downshifting quantum yields for the europium-based red luminescence, which can be modulated by the length of the polymeric chain.

Recent Progress in Photonic Upconversion Materials for Organic Lanthanide Complexes

Organic lanthanide complexes have garnered significant attention in various fields due to their intriguing energy transfer mechanism, enabling the upconversion (UC) of two or more low-energy photons into high-energy photons. In comparison to lanthanide-doped inorganic nanoparticles, organic UC complexes hold great promise for biological delivery applications due to their advantageous properties of controllable size and composition. This review aims to provide a summary of the fundamental concept and recent developments of organic lanthanide-based UC materials based on different mechanisms. Furthermore, we also detail recent applications in the fields of bioimaging and solar cells. The developments and forthcoming challenges in organic lanthanide-based UC offer readers valuable insights and opportunities to engage in further research endeavors.

Lanthanide Coordination Polymers with Soft-Base Ditopic Bisthiazolate Ligands

In order to prepare the first lanthanide coordination polymers (CPs) based on ditopic sulfide ligands, benzo[1,2-d:4,5-d']bisthiazole-2,6(3H,7H)-dithione (H2L) was used as a linker. The reactions of lanthanide silylamides Ln[N(SiMe3)2]3 (Ln = Nd, Gd, Er, and Yb) with H2L result in the formation of soluble dimethyl sulfoxide (DMSO) ionic salts [Ln(DMSO)8][L]1.5 [Ln = Nd (1), Gd (2), Er (3), and Yb (4)]. Due to the lack of coordination of anionic ligands, compounds 1, 3, and 4 do not show sensitized metal-centered photoluminescence (PL), while Gd compound 2 shows weak phosphorescence at 77 K. It was found that the heating of 1 in a 1:9 DMSO/1,4-dioxane mixture leads to the formation of large crystals of 2D CP [Nd(DMSO)3L1.5·0.5diox]n (5), where deprotonated dithione H2L plays the role of a ditopic linker. This linker acts as an "antenna" in compound 5, providing an intense near-infrared (NIR) PL of Nd3+ ion upon near-UV and blue-light excitation. The application of a synthetic protocol similar to that of compounds 2-4 led to the formation of amorphous compounds [Ln(DMSO)3L1.5·0.5diox]n [Ln = Gd (6), Er (7), and Yb (8)], whose PL properties significantly differ from those of the parental ionic salts. In the case of Yb polymer 8, the PL excitation spectra are shifted to the red region due to a low-energy ligand-to-metal charge-transfer state. The synthesized compounds 5-8 are the first examples of lanthanide CPs using soft-base ditopic linkers in their structures.

Engineering highly efficient NIR-II FRET platform for Background-Free homogeneous detection of SARS-CoV-2 neutralizing antibodies in whole blood

Förster or fluorescence resonance energy transfer (FRET) enables to probe biomolecular interactions, thus playing a vital role in bioassays. However, conventional FRET platforms suffer from limited sensitivity due to the low FRET efficiency and poor anti-interference of existing FRET pairs. Here we report a NIR-II (1000-1700 nm) FRET platform with extremely high FRET efficiency and exceptional anti-interference capability. This NIR-II FRET platform is established based on a pair of lanthanides downshifting nanoparticles (DSNPs) by employing Nd³⁺ doped DSNPs as an energy donor and Yb³⁺ doped DSNPs as an energy acceptor. The maximum FRET efficiency of this well-engineered NIR-II FRET platform reaches up to 92.2%, which is much higher than most commonly used ones. Owing to the all-NIR advantage (λ_ex = 808 nm, λ_em = 1064 nm), this highly efficient NIR-II FRET platform exhibits extraordinary anti-interference in whole blood, and thus enabling background-free homogeneous detection of SARS-CoV-2 neutralizing antibodies in clinical whole blood sample with high sensitivity (limit of detection = 0.5 μg/mL) and specificity. This work opens up new opportunities for realizing highly sensitive detection of various biomarkers in biological samples with severe background interference.

Thermally-assisted photosensitized emission in a trivalent terbium complex

Luminescent lanthanide complexes containing effective photosensitizers are promising materials for use in displays and sensors. The photosensitizer design strategy has been studied for developing the lanthanide-based luminophores. Herein, we demonstrate a photosensitizer design using dinuclear luminescent lanthanide complex, which exhibits thermally-assisted photosensitized emission. The lanthanide complex comprised Tb(III) ions, six tetramethylheptanedionates, and phosphine oxide bridge containing a phenanthrene frameworks. The phenanthrene ligand and Tb(III) ions are the energy donor (photosensitizer) and acceptor (emission center) parts, respectively. The energy-donating level of the ligand (lowest excited triplet (T₁) level = 19,850 cm^-1) is lower than the emitting level of the Tb(III) ion (⁵D₄ level = 20,500 cm^-1). The long-lived T₁ state of the energy-donating ligands promoted an efficient thermally-assisted photosensitized emission of the Tb(III) acceptor (⁵D₄ level), resulting in a pure-green colored emission with a high photosensitized emission quantum yield (73%).

Site-Selective C-H Amination of Phenol-Containing Biomolecules

A C-N bond-forming cross-dehydrogenative coupling of a collection of Tyr-containing peptides and estrogens with heteroarenes is described. This oxidative coupling is distinguished by its scalability, operational simplicity, and air tolerance and enables the appendance of phenothiazines and phenoxazines in phenol-like compounds. When incorporated into a Tb(III) metallopeptide, the Tyr-phenothiazine moiety acts as a sensitizer for the Tb(III) ion, providing a new tool for the design of luminescent probes.

A Microfluidic, Flow-Through, Liquid Reagent Fluorescence Sensor Applied to Oxygen Concentration Measurement

A concept of a microfluidic fluorescent chemical sensing system is presented and demonstrated as a sensor for measurement of dissolved oxygen in water. The system utilizes on-line mixing of a fluorescent reagent with the analyzed sample, while it measures the fluorescence decay time of the mixture. The system is built entirely out of silica capillaries and optical fibers, and allows for very low consumption of the reagent (of the order of mL/month) and the analyzed sample (of the order of L/month). The proposed system can, thus, be applied to continuous on-line measurements, while utilizing a broad variety of different and proven fluorescent reagents or dyes. The proposed system allows for the use of relatively high-excitation light powers, as the flow-through concept of the system reduces the probability of the appearance of bleaching, heating, or other unwanted effects on the fluorescent dye/reagent caused significantly by the excitation light. The high amplitudes of fluorescent optical signals captured by an optical fiber allow for low-noise and high-bandwidth optical signal detection, and, consequently, the possibility for utilization of reagents with nanosecond fluorescent lifetimes.

Expedient synthesis and luminescence sensing of the inositol pyrophosphate cellular messenger 5-PP-InsP5

Inositol pyrophosphates are important biomolecules associated with apoptosis, cell growth and kinase regulation, yet their exact biological roles are still emerging and probes do not exist for their selective detection. We report the first molecular probe for the selective and sensitive detection of the most abundant cellular inositol pyrophosphate 5-PP-InsP5, as well as an efficient new synthesis. The probe is based on a macrocyclic Eu(iii) complex bearing two quinoline arms providing a free coordination site at the Eu(iii) metal centre. Bidentate binding of the pyrophosphate group of 5-PP-InsP5 to the Eu(iii) ion is proposed, supported by DFT calculations, giving rise to a selective enhancement in Eu(iii) emission intensity and lifetime. We demonstrate the use of time-resolved luminescence as a bioassay tool for monitoring enzymatic processes in which 5-PP-InsP5 is consumed. Our probe offers a potential screening methodology to identify drug-like compounds that modulate the activity of enzymes of inositol pyrophosphate metabolism.

Seeking Brightness in Molecular Erbium-Based Light Upconversion

Whereas dye-sensitized lanthanide-doped nanoparticles represent an unquestionable advance for pushing linear near-infrared (NIR) to visible-light upconversion within the frame of applications, analogous improvements are difficult to mimic for related but intramolecular processes induced at the molecular level in coordination complexes. Major difficulties arise from the cationic nature of the target cyanine-containing sensitizers (S), which drastically limits their thermodynamic affinities for catching the lanthanide activators (A) required for performing linear light upconversion. In this context, the rare previous design of stable dye-containing molecular SA light-upconverters required large S···A distances at the cost of the operation of only poorly efficient intramolecular S → A energy transfers and global sensitization. With the synthesis of the compact ligand [L2]⁺, we exploit here the benefit of using a single sulfur connector between the dye and the binding unit for counterbalancing the drastic electrostatic penalty which is expected to prevent metal complexation. Quantitative amounts of nine-coordinate [L2Er(hfac)₃]⁺ molecular adducts could be finally prepared in solution at millimolar concentrations, while the S···A distance has been reduced by 40% to reach circa 0.7 nm. Detailed photophysical studies demonstrate the operation of a three times improved energy transfer upconversion (ETU) mechanism for molecular [L2Er(hfac)₃]⁺ in acetonitrile at room temperature, thanks to the boosted heavy atom effect operating in the close cyanine/Er pair. NIR excitation at 801 nm can thus be upconverted into visible light (525-545 nm) with an unprecedented brightness of B^up(801 nm) = 2.0(1) × 10^-3 M^-1·cm^-1 for a molecular lanthanide complex.