Characterizing photochemical ageing processes of microplastic materials using multivariate analysis of infrared spectra

High-altitude aquatic ecosystems offer faster aging rate of plastics

While research on the aging behavior of plastics in aquatic systems is extensive, studies focusing on high-altitude ecosystems, characterized by higher solar radiation and lower temperatures, remain limited. This study investigated the long-term aging behavior of non-biodegradable plastics (non-BPs), namely polyethylene terephthalate (PET) and polypropylene (PP) and biodegradable plastics (BPs), specifically polylactic acid plus polybutylene adipate-co-terephthalate (PLA + PBAT) and starch-based plastic (SBP), in a tributary of the Yarlung Zangbo River on the high-altitude Tibetan Plateau. Over 84 days of field aging, all four types of plastics exhibited initial rapid aging followed by deceleration. This aging process can be divided into two phases: rapid surface oxidation aging and an aging plateau phase. Notably, PP aged at a rate comparable to BPs, contrary to expectations of faster aging for BPs. Compared to low-altitude aquatic ecosystems, plastics in this study showed a faster aging rate. This was primarily due to intense ultraviolet radiation causing severe photoaging. Furthermore, the lower temperatures contributed to the formation of thinner biofilms. These thinner biofilms exhibited a reduced capacity to block light, further exacerbating the photoaging process of plastics. Statistical analysis results indicated that temperature, total nitrogen TN, and total phosphorus TP were likely the main water quality parameters influencing plastic aging. The varying effects of water properties and nutrients underscore the complex interaction of water quality parameters in high-altitude environments. Given the delicate nature of the high-altitude environment, the environmental impact of plastics, especially BPs, warrants careful consideration.

Addressing the relevance of polystyrene nano- and microplastic particles used to support exposure, toxicity and risk assessment: implications and recommendations

BACKGROUND

There has been an exponential increase in the number of studies reporting on the toxicological effects associated with exposure to nano and microplastic particles (NMPs). The majority of these studies, however, have used monodispersed polystyrene microspheres (PSMs) as 'model' particles. Here we review the differences between the manufacture and resulting physicochemical properties of polystyrene used in commerce and the PSMs most commonly used in toxicity studies.

MAIN BODY

In general, we demonstrate that significant complexity exists as to the properties of polystyrene particles. Differences in chemical composition, size, shape, surface functionalities and other aspects raise doubt as to whether PSMs are fit-for-purpose for the study of potential adverse effects of naturally occurring NMPs. A realistic assessment of potential health implications of the exposure to environmental NMPs requires better characterisation of the particles, a robust mechanistic understanding of their interactions and effects in biological systems as well as standardised protocols to generate relevant model particles. It is proposed that multidisciplinary engagement is necessary for the development of a timely and effective strategy towards this end. We suggest a holistic framework, which must be supported by a multidisciplinary group of experts to work towards either providing access to a suite of environmentally relevant NMPs and/or developing guidance with respect to best practices that can be adopted by research groups to generate and reliably use NMPs. It is emphasized that there is a need for this group to agree to a consensus regarding what might best represent a model NMP that is consistent with environmental exposure for human health, and which can be used to support a variety of ongoing research needs, including those associated with exposure and hazard assessment, mechanistic toxicity studies, toxicokinetics and guidance regarding the prioritization of plastic and NMPs that likely represent the greatest risk to human health. It is important to acknowledge, however, that establishing a multidisciplinary group, or an expert community of practice, represents a non-trivial recommendation, and will require significant resources in terms of expertise and funding.

CONCLUSION

There is currently an opportunity to bring together a multidisciplinary group of experts, including polymer chemists, material scientists, mechanical engineers, exposure and life-cycle assessment scientists, toxicologists, microbiologists and analytical chemists, to provide leadership and guidance regarding a consensus on defining what best represents environmentally relevant NMPs. We suggest that given the various complex issues surrounding the environmental and human health implications that exposure to NMPs represents, that a multidisciplinary group of experts are thus critical towards helping to progress the harmonization and standardization of methods.

Raman-guided exploration of placental microplastic exposure: Unraveling the polymeric tapestry and assessing developmental implications

The prevalence of microplastics in human tissues and their potential reproductive toxicity have been increasingly documented, yet their appearance in the placenta and the impact of microplastic exposure on human fertility and pregnancy remains uncertain. Utilizing an inVia™ confocal Raman microspectroscopy by Renishaw equipped with a detection threshold as low as 0.25 µm, our study examined the microplastics in the placentas of 50 women post-delivery and investigated their correlations with gestational age, and neonatal length and weight. We found that 40 microplastic particles were identified across 31 of 50 placentas, averaging 2.35 ± 1.25 µm in size and ranging from 1.03 to 6.84 µm. Seven distinct polymer types were detected, with PTFE, PS, and ABS being the most prevalent. Notably, no significant difference across the normal, PTFE, and PS groups for all demographic variables examined was identified, nor as pathological alterations of placental tissues. In conclusion, our findings demonstrate the presence of seven microplastic polymers in human placentas, with PTFE, PS, and ABS being the most prevalent. However, maternal and neonatal parameters were not affected, and further studies are necessary to elucidate the effects of microplastics on developmental outcomes and fetal health.

Enhancing the coagulation process for the removal of microplastics from water by anionic polyacrylamide and natural-based Moringaoleifera

The existence of microplastics (MPs) in water is a significant global concern since they have the potential to pose a threat to human health. Therefore, there is a need to develop a sustainable treatment technology for MPs removal, as the conventional methods are inadequate to address this problem. Coagulation is a typical process in treatment plants that can capture MPs before releasing them into the environment. In this work, the removal behaviors of polyamide (PA), polystyrene (PS), and polyethylene (PE) MPs were systematically investigated through coagulation processes using aluminum sulfate (Al2(SO4)3) and Moringa oleifera (MO) seeds extract. Subsequently, the coagulation performance of Al2(SO4)3 was improved by the separate addition of anionic polyacrylamide (APAM) and naturally derived MO. Results showed that Al2(SO4)3 in combination with APAM had better performance than Al2(SO4)3 or MO alone. In the Al2(SO4)3+APAM system, the removal efficiencies were 93.47%, 81.25%, and 29.48% for PA, PS, and PE MPs, respectively. Furthermore, the effectiveness of the Al2(SO4)3 and MO blended system was approximately similar to the Al2(SO4)3+APAM system. However, the required amount of Al2(SO4)3 was decreased to 50% in the Al2(SO4)3+MO system compared to the optimal dosage in the Al2(SO4)3 system alone. The combination of 40 mg/L of Al2(SO4)3 and 60 mg/L of MO resulted in removal efficiencies of 92.99%, 80.48%, and 28.94% for PA, PS, and PE MPs, respectively. The high efficacy of these enhanced methods was due to the synergic effects of charge neutralization and agglomeration adsorption, which were validated through zeta potential assessments and visual analysis using scanning electron microscopy (SEM) images. In the case of experimental conditions, initial pH had little impact on removal efficiency, while NaCl salinity and stirring speed directly affected MPs removal. Consequently, this research took a step toward finding a green strategy to remove MPs from water systems.

Interactive impacts of photoaged micro(nano)plastics and co-occurring chemicals in the environment

In the environment, sunlight or ultraviolet (UV) radiation is considered to be the primary cause of plastic aging, leading to their fragmentation into particles, including micro(nano)plastics (MNPs). Photoaged MNPs possess diverse interactive properties and ecotoxicological implications substantially different from those of pristine plastic particles. This review aims to highlight the mechanisms and implications of UV-induced photoaging of MNPs, with an emphasis on various UV sources and their interactions with co-occurring organic and inorganic chemicals, as well as the associated ecological and health impacts and factors affecting those interactions. Compared to UV-B, UV-A and UV-C were more widely used in laboratory studies for MNP degradation. Photoaged MNPs act as vectors for the transportation of organic pollutants, organic matter, and inorganic chemicals in the environment. Literature showed that photoaged MNPs exhibit a higher sorption capacity for PPCPs, PAHs, PBDEs, pesticides, humic acid, fulvic acid, heavy metals, and metallic nanoparticles than pristine MNPs, potentially causing significant changes in associated ecological and health impacts. Combined exposure to photoaged MNPs and organic and inorganic pollutants significantly altered mortality rate, decreased growth rate, histological alterations, neurological impairments, reproductive toxicity, induced oxidative stress, thyroid disruption, hepatotoxicity, and genotoxicity in vivo, both in aquatic and terrestrial organisms. Limited studies were reported in vitro and found decreased cellular growth and survival, induced oxidative stress, and compromised the permeability and integrity of the cell membrane. In addition, several environmental factors (temperature, organic matter, ionic strength, time, and pH), MNP properties (polymer types, sizes, surface area, shapes, colour, and concentration), and chemical properties (pollutant type, concentration, and physiochemical properties) can influence the photoaging of MNPs and associated impacts. Lastly, the research gaps and prospects of MNP photoaging and associated implications were also summarized. Future research should focus on the photoaging of MNPs under environmentally relevant conditions, exploiting the polydisperse characteristics of environmental plastics, to make this process more realistic for mitigating plastic pollution.

Size Distributions of Microplastics in the St Louis Estuary and Western Lake Superior

Identifying the sources and fate of microplastics in natural systems has garnered a great deal of attention because of their implications for ecosystem health. This work characterizes the size fraction, morphology, color, and polymer composition of microplastics in western Lake Superior and its adjacent harbor sampled in August and September 2021. The results reveal that the overall microplastic counts are similar, with the harbor stations ranging from 0.62 to 3.32 microplastics per liter and the lake stations ranged from 0.83 to 1.4 microplastics per liter. However, meaningful differences between the sample locations can be seen in the size fraction trends and polymer composition. Namely, the harbor samples had relatively larger amounts of the largest size fraction and more diversity of polymer types, which can be attributed to the urbanized activity and shorter water residence time. Power law size distribution modeling reveals deviations that help in the understanding of potential sources and removal mechanisms, although it significantly underpredicts microplastic counts for smaller-sized particles (5-45 μm), as determined by comparison with concurrently collected microplastic samples enumerated by Nile Red staining and flow cytometry.

Assessing biofilm formation and resistance of vibrio parahaemolyticus on UV-aged microplastics in aquatic environments

UV degradation of marine microplastics (MPs) could increase their vector potential for pathogenic bacteria and threaten human health. However, little is known about how the degree of UV aging affects interactions between MPs and pathogens and how various types of MPs differ in their impact on seafood safety. This study investigated five types of UV-aged MPs and their impact on Vibrio parahaemolyticus, a seafood pathogen. MPs exposed to UV for 60 days showed similar physicochemical changes such as surface cracking and hydrophobicity reduction. Regardless of the type, longer UV exposure of MPs resulted in more biofilm formation on the surface under the same conditions. V. parahaemolyticus types that formed biofilms on the MP surface showed 1.4- to 5.0-fold upregulation of virulence-related genes compared to those that did not form biofilms, independently of UV exposure. However, longer UV exposure increased resistance of V. parahaemolyticus on MPs to chlorine, heat, and human gastrointestinal environment. This study implies that the more UV degradation occurs on MPs, the more microbial biofilm formation is induced, which can significantly increase virulence and environmental resistance of bacteria regardless of the type of MP.

Microplastic generation from field-collected plastic gauze: Unveiling the aging processes

Accumulation of plastic debris in the environment is a matter of global concern. As plastic ages, it generates microplastic (MP) particles with high mobility. Understanding how MPs are generated is crucial to controlling this emerging contaminant. In this study, we utilized high-density polyethylene (HDPE) plastic gauze, collected from urban settings, as a representative example of plastic waste. The plastic gauze was subjected to various aging conditions, including freeze-thaw cycling, mechanical abrasion, and UV irradiation. Following aging, the plastic gauze was rinsed with water, and the number of generated MPs were quantified. It was found that aged plastic gauze generated up to 334 million MP particles per m2 (> 10 µm) during rinsing, a number two orders of magnitude higher than unaged plastic. Fragmentation occurred in two dimensions for bulk MPs of all morphotypes. However, specific aging approaches (i.e., mechanical abrasion and UV irradiation) generated spheres and fibers via pseudo-3D fragmentation. Additionally, changes in molecular weight, size distribution, and surface oxidation characteristics unveiled a complex pattern (i.e., irregular changes with exposure time). This complexity underscores the intricate nature of plastic debris aging processes in the environment.

Mechanistic interpretation of the sorption of terbuthylazine pesticide onto aged microplastics

Microplastics (MPs) pose a global concern due to their ubiquitous distribution. Once in the environment, they are subject to aging, which changes their chemical-physical properties and ability to interact with organic pollutants, such as pesticides. Therefore, this study investigated the interaction of the hydrophobic herbicide terbuthylazine (TBA), which is widely used in agriculture, with artificially aged polyethylene (PE) MP (PE-MP) to understand how aging affects its sorption. PE was aged by an accelerated weathering process including UV irradiation, hydrogen peroxide, and ultrasonic treatment, and aged particles were characterized in comparison to pristine particles. Sorption kinetics were performed for aged and pristine materials, while further sorption studies with aged PE-MP included determining environmental factors such as pH, temperature, and TBA concentration. Sorption of TBA was found to be significantly lower on aged PE-MP compared to pristine particles because aging led to the formation of oxygen-containing functional groups, resulting in a reduction in hydrophobicity and the formation of negatively charged sites on oxidized surfaces. For pristine PE-MP, sorption kinetics were best described by the pseudo-second-order model, while it was intra-particle diffusion for aged PE-MP as a result of crack and pore formation. Sorption followed a decreasing trend with increasing pH, while it became less favorable at higher temperatures. The isotherm data revealed a complex sorption process on altered, heterogeneous surfaces involving hydrophobic interactions, hydrogen bonding, and π-π interactions, and the process was best described by the Sips adsorption isotherm model. Desorption was found to be low, confirming a strong interaction. However, thermodynamic results imply that increased temperatures, such as those resulting from climate change, could promote the re-release of TBA from aged PE-MP into the environment. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) confirmed TBA sorption onto PE.

Plastiglomerates from uncontrolled burning of plastic waste on Indonesian beaches contain high contents of organic pollutants

This study reports on plastiglomerate and other new forms of plastic pollution in the tropical marine continent of Indonesia. Twenty-five samples were collected from an island beach in the Java Sea where plastiglomerate, plasticrusts, and pyroplastic were formed by the uncontrolled burning of plastic waste. The most common plastic types were polyethylene and polypropylene (PE/PP), as shown by ATR-FTIR spectroscopy. However, acrylates/polyurethane/varnish (PU) and a copolymer of styrene and acrylonitrile were found as well. This suggests that plastiglomerates can form from a wider variety of plastic polymers than previously reported. FTIR analysis also indicates thermo-oxidative weathering, making the charred plastic more brittle and susceptible to microplastic formation. A subset of the samples was analyzed for associated chemical contaminants. One plastiglomerate with a PU matrix showed high concentrations of phthalates. All samples had high concentrations of polycyclic aromatic hydrocarbons (PAHs), likely due to the burning of the plastic in open fires. The burning leads to a change in the physical and chemical properties of the plastics contained in the plastiglomerates. Plastiglomerate and plastic waste of similar origin are therefore often more weathered and contaminated with organic pollutants than their parent polymers. The highest PAH concentration was found in a plastitar sample. Plastitar is defined as an agglomerate of tar and plastics that adheres to coastal rocks. In contrast, our study documents a more mobile, clastic plastitar type. This clastic plastitar could pose an additional ecological risk because of its mobility. These new types of plastic pollution could be an important vector for chemical contamination of nearby coastal habitats such as coral reefs, seagrass meadows, and mangroves.

Polypropylene microplastics aging under natural conditions in winter and summer and its effects on the sorption and desorption of nonylphenol

Plastics in the environment undergo various aging effects. Due to the changes in physical and chemical properties, the sorption behavior of aged microplastics (MPs) for pollutants differs from that of pristine MPs. In this paper, the most common disposable polypropylene (PP) rice box was used as the source of MPs to study the sorption and desorption behavior of nonylphenol (NP) on pristine and naturally aged PPs in summer and winter. The results show that summer-aged PP has more obvious property changes than winter-aged PP. The equilibrium sorption amount of NP on PP is summer-aged PP (477.08 μg/g) > winter-aged PP (407.14 μg/g) > pristine PP (389.29 μg/g). The sorption mechanism includes the partition effect, van der Waals forces, hydrogen bonds and hydrophobic interaction, among which chemical sorption (hydrogen bonding) dominates the sorption; moreover, partition also plays an important role in this process. Aged MPs' more robust sorption capacity is attributed to the larger specific surface area, stronger polarity and more oxygen-containing functional groups on the surface that are conducive to forming hydrogen bonds with NP. Desorption of NP in the simulated intestinal fluid is significant owning to intestinal micelles' presence: summer-aged PP (300.52 μg/g) > winter-aged PP (291.08 μg/g) > pristine PP (287.12 μg/g). Hence, aged PP presents a more vital ecological risk.

Fourier Transform Infrared Spectroscopy to Assess the Degree of Alteration of Artificially Aged and Environmentally Weathered Microplastics

Fourier transform infrared (FTIR) is a spectroscopy technique widely used to identify organic materials. It has recently gained popularity in microplastic (MP) pollution research to determine the chemical composition of unknown plastic fragments. However, it could also be used to evaluate the degree of ageing of MPs collected from the environment. In this context, the principal aim of our research has been to qualitatively evaluate the natural weathering of environmental MPs collected in an Italian freshwater body (the Ofanto River) using ATR-FTIR technology. Furthermore, we compared environmental particles to weathered artificial MPs under controlled light and temperature conditions and to unaltered pristine materials to assess the results. FTIR spectra were acquired using a Nicolet Summit FTIR (ThermoFisher Scientific) equipped with an Everest ATR with a diamond Crystal plate and a DTGS KBr detector (wavenumber range 4000-500 cm^-1, 32 scans per spectrum, spectral resolution of 4 cm^-1). The degree of ageing was assessed using three different indexes known to be related to changes in MPs: Carbonyl Index (CI), Hydroxyl Index (HI), and Carbon-Oxygen Index (COI). The overall results showed that the regions reflecting changes (hydroxyl groups, peaks from 3100 to 3700 cm^-1, alkenes or carbon double bonds, 1600 and 1680 cm^-1, and carbonyl groups, 1690 and 1810 cm^-1) appeared significantly modified in artificial and natural weathered particles compared to the pristine materials. The indexes calculated for polymers degraded under the artificial photo and thermo ageing conditions displayed a general tendency to increase with the time in contact with irradiation time. Particular enhancements of CI of PS fragment and PE pellet, HI of PE and PS fragments and PE pellet, and COI of PS fragment were observed. Otherwise, the following incubation of the same particles at a constant temperature of 45 °C did not further affect the chemical composition of the particles. Moreover, new unique peaks were also observed in the freshwater particles, almost all in the fingerprint region (1500-500 cm^-1). Differences in CI, HI, and COI were evidenced among the different morphological MP shapes. On the one hand, the CI calculated for the environmental PE pellets showed values ranging from 0.05 to 0.26 with a mean value of 0.17 ± 0.10. Most samples (57%) presented a CI with values between 0.16 and 0.30. On the other hand, fragments presented slicer modifications in the carbonyl region with CI values lower than pellets (0.05 ± 0.05). This index helps evaluate the degradation of PE MPs by UV light, increasing with enhancing residence time in the environment. Conversely, fragments showed greater values of HI (5.90 ± 2.57) and COI (1.04 ± 0.48) than pellets, as well as lines, which presented the maximum value of HI (11.51). HI is attributed to the bond vibrations of hydroxyl, carboxyl, or phenol groups. In contrast, COI is frequently attributed to the vibrations of C_O bonds found in carbohydrates, alkanes, secondary alcohols, and ketones. In conclusion, our results showed characteristics spectra acquired from environmental particles compared to pristine and artificial aged ones. The interpretation of our main results emphasizes the need to conduct ecotoxicological experimental studies using naturally weathered particles due to the unicity of their properties, which are more helpful for understanding microplastic pollution effects.

Abiotic Long-Term Simulation of Microplastic Weathering Pathways under Different Aqueous Conditions

Microplastics (MPs) are one of the most abundant and widespread anthropogenic pollutants worldwide. In addition to the global spread and threats of plastic to native species by carrying toxic substances, its slow degradation rate and resulting long retention time in the environment constitute a problem that is still poorly understood. In this study, five of the most manufactured plastic types were weathered under simulated beach conditions for 18 months in freshwater, brackish water, and seawater. Those included polyethylene (PE), polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), and polyvinyl chloride (PVC). PP was the first polymer type that fragmented after 9 months of weathering and influenced the pH of the surrounding water. Molecular surface changes were detected for all polymers, just after the first week. Hydroxyl bonds were one of the first groups incorporated into the polymers, weakening 2-3 weeks later. Carbonyl groups were also measured early, but with significantly different developments with time between the polymer types. Differences in degradation rates were proven between the water media, with the fastest degradation in seawater compared to brackish water and freshwater for PE and PP. These results are consistent with previous findings on MPs aged under environmental conditions and provide initial long-term observations of MP degradation pathways under simulated environmental conditions. These findings are valuable for assessing the fate and hazards of MPs in aquatic systems.

Physicochemical and biological ageing processes of (micro)plastics in the environment: a multi-tiered study on polyethylene

Pollution by plastic and microplastic impacts the environment globally. Knowledge on the ageing mechanisms of plastics in natural settings is needed to understand their environmental fate and their reactivity in the ecosystems. Accordingly, the study of ageing processes is gaining focus in the context of the environmental sciences. However, laboratory-based experimental research has typically assessed individual ageing processes, limiting environmental applicability. In this study, we propose a multi-tiered approach to study the environmental ageing of polyethylene plastic fragments focusing on the combined assessment of physical and biological processes in sequence. The ageing protocol included ultraviolet irradiation in air and in a range of water solutions, followed by a biofouling test. Changes in surface characteristics were assessed by Fourier transform infrared spectroscopy, scanning electron microscopy, and water contact angle. UV radiation both in air and water caused a significant increase in the density of oxidized groups (i.e., hydroxyl and carbonyl) on the plastic surface, whereby water solution chemistry influenced the process both by modulating surface oxidation and morphology. Biofouling, too, was a strong determinant of surface alterations, regardless of the prior irradiation treatments. All biofouled samples present (i) specific infrared bands of new surface functional groups (e.g., amides and polysaccharides), (ii) a further increase in hydroxyl and carbonyl groups, (iii) the diffuse presence of algal biofilm on the plastic surface, and (iv) a significant decrease in surface hydrophobicity. This suggests that biological-driven alterations are not affected by the level of physicochemical ageing and may represent, in real settings, the main driver of alteration of both weathered and pristine plastics. This work highlights the potentially pivotal role of biofouling as the main process of plastic ageing, providing useful technical insights for future experimental works. These results also confirm that a multi-tiered laboratory approach permits a realistic simulation of plastic environmental ageing in controlled conditions.

Gender difference in hepatic AMPK pathway activated lipid metabolism induced by aged polystyrene microplastics exposure

Microplastics (MPs) pollution becomes an increasing concern and researchers keep exploring the health effects caused by MPs exposure. The ageing process in the environment significantly alters the physicochemical characteristics of MPs and subsequently affects their toxicities. The health effects of aged MPs exposure and the mechanism underlying are worthy of exploration. Polystyrene microplastics (PS-MPs) (with size less than 50 µm) were obtained by grinding and screening polystyrene materials. PS-MPs continued to be aged by ozone treatment (0.4 mg/min, 9 h). Both male and female C57BL/6 mice were orally exposed to 0 or 2 mg/kg/d aged PS-MPs for 28 days. Results showed that PS-MPs were found in liver, ovary and spleen of females and liver, testis and spleen of males in the aged PS-MPs group. Exposure to aged PS-MPs significantly decreased abdominal fat/body coefficient, the adipocyte size and the serum LDL-C level in females. Compared to the control, serum estradiol (E2) level, the mRNA expression levels of genes regulating E2 production (17β-hsd, 3β-hsd and Star) in ovary and the protein expression levels of E2 receptors (ERα, ERβ), AMPKα and p-AMPKα1 in liver increased significantly, and the mRNA expression levels of AMP-activated protein kinase (AMPK) downstream genes (Srebp-1c, Fas and Scd1) in liver decreased significantly in the female aged PS-MPs group. Liver metabolomic profiling showed that differential metabolites between female aged PS-MPs group and female control group were enriched in biotin metabolism and the level of biotin increased significantly in the female aged PS-MPs group. However, no significant changes were detected in males. These results indicated that aged PS-MPs exposure increased ovarian E2 production and activated the AMPK pathway in the liver which might inhibit liver lipid synthesis only in females. Our findings provide new insights into the potential sex-specific health effects of environmental MPs pollution.

Microplastics from shoe sole fragments cause oxidative stress in a plant (Vigna radiata) and impair soil environment

Shoe sole fragments are generated by sole abrasion, which is unavoidable. These fragments can enter the soil ecosystem. However, limited studies have evaluated their effects on soils and plants. Here, we aimed to evaluate the toxicity of shoe sole fragments on a crop plant, Vigna radiata (mung bean). Shoe sole fragments (size: 57-229 µm) were obtained from four shoe types (trekking shoes, slippers, sneakers, and running shoes) and plant toxicity assessments were performed. Additionally, the fragments were leached for 30 d, and potentially toxic leachates were identified. Shoe sole fragments exhibited adverse effects depending on the shoe type. The fragments of soles from sneakers increased the bulk density of the soil but reduced its water holding capacity. Moreover, the microplastic fragments and leachates directly affected plant growth and photosynthetic activities. The fragments of slippers and running shoes boosted plant growth but changed the flavonoid content and photosynthetic factors. Trekking shoe sole fragments did not exhibit plant photoinhibition; however, their leachate inhibited photosynthesis. Overall, it was concluded that shoe sole fragments can cause adverse effects in plants and impair soil environment. Our study findings indicate that it is necessary to develop shoe soles that have less harmful environmental effects.