C-shaped root canals in mandibular second molars in a Saudi Arabian population

Exploring the sex-associated differences in molars fused roots

BACKGROUND

Human sexual dimorphism is associated with many biological characteristics, including dental variables.

OBJECTIVES

To investigate if molars fused roots present sex-associated differences.

METHODS

Panoramic radiographs were used to investigate the frequency and distribution of permanent molars fused roots. Only patients with all first and second permanent molars were included. Third molars were not investigated. Any molar with roots fused apical to the usual furcal position were considered molar fused roots. Comparisons between males and females were performed using chi-square or Fisher's and Mann-Whitney tests and the established alpha was 5% (p<0.05). Sex-differential liability models were also proposed.

RESULTS

A total of 84 males and 86 females were included and 1360 molars were analyzed. Among them, 46 (26.06%) present at least one molar with fused root. Second maxillary molars were the most affected teeth. There was an association between sex and molars with fused roots. Females had a 3.4 higher chance to present fused roots than males (OR=3.4, CI 95% 1.6-6.8; p=0.0008). The female: male ratio of molars with fused roots was 2.5:1. The number of molars with fused roots ranged from 1 to 6 per patient, and the mean number of Females presented more molars with fused roots (mean = 1.01; standard deviation = 1.52) than males (mean = 0.31; standard deviation = 0.85) (p<0.05).

CONCLUSIONS

Molar fused root of permanent teeth presents sex-associated differences, in which females are more affected than males. Our results support sex-differential liability models for molars fused roots.

The Assessment of C-shaped Canal Prevalence in Mandibular Second Molars Using Endodontic Microscopy and Cone Beam Computed Tomography: An In Vivo Investigation

Background Understanding root canal anatomy variations, particularly C-shaped canals, is crucial for successful endodontic treatment. This study used clinical and radiographic methods to assess the prevalence and characteristics of C-shaped canals in mandibular second molars in Western Maharashtra. Materials and methods This prospective study was conducted in the western region of Maharashtra, India. The samples included patients requiring endodontic treatment for mandibular second molars. Clinical evaluation was conducted using a surgical endodontic microscope and cone beam computed tomography (CBCT) imaging. Inclusion and exclusion criteria ensured the selection of a focused and homogeneous sample. Data analysis included assessment of unilateral/bilateral occurrence, canal distribution, and cross-sectional characteristics. Results Out of 200 mandibular second molars, 7.5% exhibited C-shaped root canals, with no significant gender differences. Canal distribution varied across coronal, middle, and apical levels, with prevalent configurations being C1, C2, C3, and C4. No significant differences were observed in canal distribution based on root levels. No significant gender differences were found in the presence of grooves on the root surfaces. Conclusion This study provides valuable insights into the prevalence and characteristics of C-shaped canals in mandibular second molars in Western Maharashtra. Further research into histological and genetic aspects can enhance our understanding, leading to improved treatment strategies for complex root canal anatomy variations.

Prevalence and Morphology of C-Shaped Canals in Mandibular First and Second Molars of an Iranian Population: A Cone-Beam Computed Tomography Assessment

Objectives

The complex anatomy of C-shaped canals poses challenges for clinicians compared to teeth with normal root canal anatomy. This study is aimed at evaluating the frequency and morphology of C-shaped canals in the mandibular first and second molars among an Iranian population using cone-beam computed tomography (CBCT).

Materials and Methods

This cross-sectional study evaluated 369 CBCT scans from the archives of a radiology clinic in Ardabil, Iran. The sample included 248 mandibular first molars and 478 mandibular second molars. The presence of C-shaped canals and their classification, according to Fan et al., were evaluated at four levels: orifice, coronal, middle, and apical. Prevalence based on gender and tooth type was also assessed.

Results

A total of 199 (53.9%) males and 170 (46.1%) females were evaluated. C-shaped canals were found in 11 (8 males/3 females) out of 248 (4.4%) first molars and in 20 (11 males/9 females) out of 478 (3.7%) second molars. The C2 configuration was most prevalent in the orifice, coronal, and middle levels of both molar types, while C3 and C4 morphologies were most commonly found apically in the second and first molars, respectively. A significant difference in configuration was found only at the coronal level between molar types. A significant association between gender and configuration was observed only at the orifice level of the second molars. No other significant differences were found (P > 0.05).

Conclusion

C-shaped canal configurations should be expected in 4.4% of mandibular first molars and 3.7% of the second molars in this Iranian population, with a predominance of the C2 configuration in the orifice, coronal, and middle levels.

Investigation of mandibular second molar root and canal morphology in a Black South African population using cone-beam computed tomography and two classification systems

PURPOSE

To investigate the root and canal morphology of mandibular second molars, including anatomical variations, in a Black South African population using two classification systems.

METHODS

Cone-beam computed tomography images of 386 teeth were evaluated. The number of roots and canal configurations were categorized using the classifications of Vertucci (with modifications by Sert and Bayirli) and Ahmed et al. (including the modified Melton classification). Relationships between variables were assessed using Fisher's exact test (P < 0.05).

RESULTS

Mandibular second molars were predominantly two-rooted (91.7%). The majority of teeth had three canals including Type IV mesial (41.2%) and Type I (75.1%) distal (Ahmed et al. configuration: 2MDM M2 D1). Three or more canals were present in almost one-fifth of mesial (n = 72/386, 18.6%) and a small number of distal (n = 21/386, 5.4%) roots. Males displayed additional canals more frequently in the distal root (P = 0.02). C-shaped anatomy was found in 5.7%. Among the C-shapes, the most common was Melton's Type III in the coronal (50%), middle (81%) and apical (72%) thirds.

CONCLUSION

In this population, mandibular second molar teeth exhibited diverse morphology, which would have clinical significance for endodontic practitioners. The Ahmed et al. classification provided a better description than the Vertucci classification.

Root and canal morphology of maxillary second molars in a Black South African subpopulation using cone-beam computed tomography and two classifications

This study investigated the root and canal morphology of maxillary second molars in a Black South African population using high-resolution cone-beam computed tomography. In total, 386 maxillary second molar teeth were evaluated and described according to the classifications of Vertucci (with the additions of Sert and Bayirli), as well as Ahmed et al. Root number, fusions and canal morphology were recorded. Relationships between morphology, sex and age were assessed using Fisher's exact test (p < 0.05). Maxillary second molars were predominantly three-rooted (96.1%), with root fusion observed in 14%. No relationships between sex, age and canal morphology were found. Additional canals were observed in 67.4% of mesiobuccal roots. The Ahmed et al. classification provided a better overall description of the morphology. In this population, maxillary second molar teeth exhibited a diversity of root and canal morphology. Complex variations may render endodontic management more difficult and increase the possibility of missed anatomy.

Variation in location of the distobuccal root canal in a permanent maxillary second molar: A case report

Key Clinical Message

Clinicians should be aware of the variations in the number of roots and root canals and the peculiar or eccentric location of root canals. An intraoperative CBCT can be very useful in improved visualization of the anatomical variations.

Abstract

This case report describes the unusual location of the distobuccal root canal in a maxillary second molar with root fusion. On access opening, three distinct root canal orifices, the mesiobuccal canal, palatal canal, and a third orifice closer to the palatal canal, were seen, giving an illusion of an additional palatal canal. An attempt was made to search for the distobuccal canal in its usual position, leading to the gouging of the pulp chamber floor. An intraoperative limited field of view cone-beam computed tomography (CBCT) revealed the root orifice adjacent to the palatal canal was the distobuccal canal. CBCT also revealed fusion of both the buccal and palatal roots in the root's coronal and middle third region, but they were not fused apically.

Anatomical Evaluation of Root and Root Canal Morphology of Permanent Mandibular Dentition among the Saudi Arabian Population: A Systematic Review

This study aimed to conduct a compendious review of root canal morphology of “permanent mandibular teeth in different regions of Saudi Arabia” to obtain a large sample representing the total population. A detailed search through the databases Web of Science, Scopus, and PubMed was conducted following the PRISMA guidelines. The data were analyzed based on the following inclusion criteria: original full-length original articles that reported the variables of interest “(number of roots, number of canals, Vertucci's classification system and C-shaped canals or mid-mesial canals)” of the mandibular teeth and conducted on Saudi subjects. The retrieved data were presented as frequencies and percentages. The results revealed that 56.6% of mandibular central incisors had one canal and Vertucci type I (56.6%), while 57.4% of the mandibular lateral incisors had one canal, with Vertucci types I and III most frequent. In mandibular canines, 91.8% had one canal and 8.2% had two canals. Most of the mandibular first premolars had one root (86.6%), while almost all mandibular second premolars (91.5%) had one canal, and 96.9% had Vertucci type I configuration. Among the mandibular first molars, three and four canals were prevalent in 58.7% and 40.6%, respectively. The majority of mesial roots had Vertucci type IV (60.6%), and most of distal roots had Vertucci type I (72.2%). Most of the mandibular second molars had three canals (87.3%) and showed Vertucci type IV (39.4%) canals for mesial roots and Vertucci type I (95.6%) for distal roots. The C-shaped canals were seen in 8% of first premolars and 9.8% of second molars. The middle mesial canal was found in 4.2% and 0.4% of first and second molars, respectively. This review could represent “the population of Saudi Arabia as the included samples were combined from different regions of the country.” Some variations were noticed within the same group of teeth from different regions. However, the overall results of combined samples were comparable to the other international studies.

Comprehensive evaluation of root and root canal morphology of mandibular second molars in a Saudi subpopulation evaluated by cone-beam computed tomography

BACKGROUND

The study's goal was to use Cone Beam Computed Tomography (CBCT) to assess the root and root canal anatomy of mandibular second molars with C-shaped root canal configurations in residents of the Hail district. The impact of gender and side on the frequency of root canal morphology was considered.

METHODS

The sample size for this study was 304 untreated mandibular second molars with completely developed roots on the right and left sides. Using CBCT on the teeth, the root form and canal morphology for each root are based on Vertucci's classification. The occurrence of canals in the shape of a C. The prevalence and resemblance of the left and right sides or men and females were investigated. The Chi-square test was performed to evaluate the findings.

RESULTS

Of the 304 mandibular second molars studied, 286 teeth had two roots (94.1%), whilst 13 (4.3%) were C-shaped root canal systems. 77 molars (25.3%) had two canal orifices, 219 (72.0%) had three canal orifices, and six (2.0%) and one (0.3%) had four and five root canal orifices, respectively. Type IV was the most common for mesial root, accounting for 57.7% of the sample (n = 176). For distal root, the most common occurrence was type I, which occurred 282 times (96.60%). The most prevalent root canal morphology was the presence of two canals in the mesial root and one canal in the distal root of teeth with two distinct roots (variant 3). (69.4%). The overall prevalence of C-shaped root canal systems is (4.3%) (n = 13).

CONCLUSIONS

The patient's race is an undeniable factor that influences root canal anatomy. The root canal morphology of mandibular second molars revealed significant differences between Saudi subpopulations. The majority of mandibular second molars had two roots and three root canals. When treating these molars, the presence of a C-shaped root canal system must be taken into account.

Radiographic Investigation of Root Canal Morphology of Permanent Mandibular Molars in Makkah Population (Saudi Arabia) Using Cone-Beam Computed Tomography

Objectives

This study aimed to analyze the root canal morphology of first and second permanent mandibular molars among Makkah population by using cone-beam computed tomography (CBCT).

Materials and Methods

CBCT images of two hundred eight patients were obtained from the Faculty of Dentistry, Umm Al-Qura University, Makkah, Saudi Arabia. In all images, mandibular first and second molars were evaluated for the number of roots and their morphology, number of root canals, canal configuration in each root according to Vertucci's classification, and the presence of a C-shaped canal.

Results

Most of the mandibular first molars had two roots (96.5%) and three root canals (77.7%). Type IV canal configuration prevailed (75.6%) in the mesial roots, and type I canal configuration prevailed (71.7%) in the distal roots. For the mandibular second molars, the majority had two roots (96.3%) and three root canals (82.7%). Type IV canal configuration prevailed (48%) in the mesial roots and type I (99.1%) in the distal roots. C-shaped canals were detected in 5.7% of the mandibular first molars and 4% of the mandibular second molars. There was no statistical difference between the mandibular first and second molars (P > 0.05) in the shape of the roots and the presence of the C-shaped canals.

Conclusion

Most of the mandibular molars in Makkah population presented with two roots and three root canals. The incidence of three-rooted mandibular molars was low, and it was higher in the first molars than second molars. The type IV root canal system prevailed in mesial roots and type I in distal roots.

The C-shaped Canal System in Mandibular Molars of a Saudi Arabian Population: Prevalence and Root Canal Configurations Using Cone-Beam Computed Tomography

OBJECTIVES

This retrospective study aimed to assess the prevalence of the C-shaped canal system in mandibular first and second molars in a Saudi Arabian population using cone-beam computed tomography (CBCT).

MATERIALS AND METHODS

The sample included 300 CBCT images from adults aged 18 to 80 years (38.7 ± 17.9) (150 females and 150 males). All images were analyzed to detect the C-shaped root canal according to Fan's criteria. We also categorized our findings according to the gender and direction of the longitudinal groove. Data were reported as frequencies and percentages. The Chi-squared test was used to analyze proportional differences, with the significance level set at ≤0.05.

RESULTS

The C-shaped canals were observed in 146 mandibular first molars (24.33%) and 182 second molars (30.33%). Male patients had a significantly higher prevalence of C-shaped canals in mandibular second molars than females (P=0.003). The longitudinal groove was most typically detected on the root's lingual surface (53.35%).

CONCLUSION

The incidence of the C-shaped canal in a Saudi Arabian population was 27.33% in the mandibular molars. The longitudinal groove was mostly on the lingual surface. Males showed a higher prevalence of the C-shaped canal than females.

Prevalence of C-shaped canal and related variations in maxillary and mandibular second molars in the Indian Subpopulation: A cone-beam computed tomography analysis

Aim

The aim of this study was to evaluate the prevalence and anatomical configuration of the C-shaped canal in permanent maxillary and mandibular second molars in the Greater Noida population by compiling the results of data that used cone-beam computed tomography (CBCT) analysis.

Subjects and Methods

CBCT images were taken from the archive in the department of oral medicine and radiology taken for diagnostic purposes referred by other departments in the dental college. Five hundred CBCT records of patients, between the age group of 15-40 years, containing maxillary second molars and mandibular second molars were selected and reviewed.

Statistical Analysis

Statistical analysis was done using the Chi-square test to find out the most common configuration of the C-shaped canal between maxillary and mandibular second molars.

Results

Hundred and ten out of 500 patients had C-shaped canals (22%). Among them, 58 teeth (52.7%) were continuous C-shaped canals, 41 teeth (37.3%) were semicolon-shaped canals and 11 teeth (10%) had separated canals. (Chi-square test value = 8.26, P = 0.024). Statistically significant difference was found in configuration types. Among the jaw type, 62 maxillary second molar presented with C-shaped canal (25.1%) and 48 mandibular second molar presented with C-shaped canal (18.9%) (Chi-square test value = 3.87, P = 0.276). However, the difference was statistically insignificant in relation to the jaw type.

Conclusions

Within the limitation of the study, we can conclude that the overall prevalence of C-shaped canals was 22% and the most common C-shaped canal configuration type was continuous (52.7%). However, no statistically significant difference was found in relation to jaw type.

Effectiveness of antimicrobial photodynamic therapy as an adjunct to mechanical instrumentation in reducing counts of Enterococcus faecalis and Candida albicans from C-shaped root canals

BACKGROUND/PURPOSE

The aim was to assess the effectiveness of antimicrobial photodynamic therapy (aPDT) as an adjunct to mechanical instrumentation (MI) in reducing Enterococcus faecalis (E faecalis) and Candida albicans (C albicans) counts from C-shaped root-canals.

METHODS

Teeth with C-shaped canals as identified on cone beam computed tomographic images were included. Following incubation with E faecalis and C albicans, samples were divided into 4 groups a four follows: Group-1: MI with adjunct aPDT; Group-2: aPDT alone; Group-3: MI alone; and Group-4: no treatment. The pulp chambers of these teeth were exposed and coronal pulp was mechanically derided using sterile endodontic excavators. Using flexible files, all canals were debrided up to size #30 K-files with intermittent irrigation with 2.5% sodium hypochlorite irrigation. In Groups 1 and 3, methylene-blue was injected in all canals and aPDT was performed using a 600 nm diode laser. Sample-size estimation was done on data from a pilot investigation and group-comparisons were done using one way analysis of variance and Bonferroni post-hoc adjustment tests. P < .05 was considered statistically significant.

RESULTS

Sixty periodontally hopeless mandibular second molars with C-shaped canals were included. There was a statistically significant reduction CFU/mL of E faecalis (P < .001) and C albicans (P < .001). At post-operative microbial assessments in Group-1. There was no difference CFU/mL of E faecalis and C albicans at post-operative microbial assessments in Groups 2-4.

CONCLUSION

MI with adjunct aPDT is more effective in reducing count of E faecalis and C albicans from C-shaped root canals.

Anatomical Evaluation of Mandibular Molars in a Saudi Population: An In Vivo Cone-Beam Computed Tomography Study

Objective

This study assessed the canal configuration of mandibular molars according to Vertucci's classification of a Saudi population using cone-beam computed tomography (CBCT).

Methods

A total of 290 first and 367 second mandibular molars were analyzed. The CBCT images were evaluated in three sections to inspect the number of roots and canals and canal system. The data are presented as frequencies and percentages. The chi-squared test was used to assess differences between both sides. SPSS was used for analysis, with a significance level of α ≤ 0.05.

Results

Among the first molars, 95.4% of the teeth had two roots, and 64.5% had three canals. Approximately 57.9% showed Vertucci type IV mesial roots. Between the second molars, 89.6% of teeth had two roots and 80.4% had three canals. The frequency of Vertucci type IV (39.4%) was the highest in mesial roots. The first molars showed a high prevalence of 3-rooted teeth (5.5%). Both the right and left sides showed teeth with similar external and internal anatomy (p < 0.05).

Conclusion

Most of the mandibular first and second molars had two roots and three canals. In the first mandibular molars, similar to the second mandibular molars, the majority of the mesial canals had Vertucci type IV, while the distal canals had Vertucci type I.

Root and Canal Morphology of Mandibular Second Molars in a Yemeni Population: A Cone-beam Computed Tomography

Objective:

This study aimed to identify and characterize root and canal morphology and the prevalence of C-shaped canals of mandibular second molars (MSMs) in a Yemeni population using cone-beam computed tomography (CBCT).

Methods:

Three-dimensional digital images of 500 MSMs with mature roots were taken from 250 Yemeni individuals and analyzed for the following features: number of roots, shape and type of roots, type of canal configuration in each root, prevalence of C-shaped canal, and primary variations in the morphology of root and canal systems. Chi square and Fisher’s exact tests were employed for statistical analysis.

Results:

89.6% of MSMs had two separate roots, 9% had two fused roots, 0.6% had three separate roots and 0.8% had one root. Mesial root was mostly ribbon-shaped (60.5%) and distal root was mostly kidney-shaped (50.7%). Type II and Type I canal configurations were the most frequent in mesial (56.9%) and distal (91.3%) roots, respectively. C-shaped canals were found in 9%. Six variants were found with variant 3 being the most common (71%).

Conclusion:

Yemeni MSMs are mainly two-rooted. The prevalence of three- and one-rooted MSMs was relatively low. Various canals configurations were found in MSMs among this sample of Yemeni population. The clinicians should consider C-shaped roots and canals when treating Yemeni MSMs and should be aware of their morphological variations to ensure successful root canal treatment. Although bilateral similarity of many anatomical features of MSMs was found, individual evaluation of each MSM is necessary while performing endodontic treatment on both sides.

Mesiobuccal and Palatal Interorifice Distance May Predict the Presence of the Second Mesiobuccal Canal in Maxillary Second Molars with Fused Roots

INTRODUCTION

The aim of this study was to evaluate if the configuration of canal orifices can predict the presence of a second mesiobuccal canal (MB2) in maxillary second molars with fused roots.

METHODS

Maxillary second molars with fused roots (N = 150) were scanned in a micro-computed tomographic device (pixel size = 9 μm) and evaluated regarding the root fusion type and the incidence of the MB2 canal. The centers of the canal orifices were connected, and the angles formed by the intersection of these lines as well as their distances were measured and statistically compared (1-way analysis of variance). Specimens were then assigned to 2 groups according to the presence (n = 65) or absence (n = 50) of the MB2 canal and compared regarding the angles and interorifice distances using the Welch t test. A binary logistic regression model estimated the association between the interorifice distance, the fusion type, and the presence of the MB2 canal, whereas receiver operating characteristic curve analysis was performed to evaluate the diagnostic abilities of significant variables. The significance level was set at 5%.

RESULTS

The most common fusion types were 1 and 6, and MB2 canal incidence was 47.3%. No statistical difference was observed in the angles or interorifice distances among teeth with different fusion types (P > .05). Distances from the mesiobuccal (MB) to the distobuccal and palatal (P) canal orifices as well as the MB and P angles were significantly higher in the presence of an MB2 canal (P < .05). A binary logistic regression model revealed that MB-distobuccal and MB-P distances were significant in the presence of an MB2 canal (P < .05). Receiver operating characteristic analysis indicated that MB-P distance had acceptable diagnostic accuracy for the prediction of MB2 canal presence. Sensitivity (specificity) calculated from the MB-P distances of 4.0, 4.5, and 5.0 mm were 89.2% (36.5%), 76.9% (58.4%), and 44.4% (71.4%), respectively.

CONCLUSIONS

MB-P interorifice distance is a strong predictor of the presence of the MB2 canal in maxillary second molars with fused roots.

Mandibular molar C-shaped root canals in 5th millennium BC China

OBJECTIVE

The aim of this study was to analyze the occurrence and variations in C-shaped canals in ancient Chinese teeth and compare the differences of these features between ancient and age-matched modern populations.

DESIGN

Approximately 5000-year-old craniofacial bone remains were collected from the fossils of 38 individuals (total: 68 mandibular second molars) excavated from the Jiaojia site. The control group comprised of an equal number of randomly selected modern samples. We used cone-beam computed tomography to scan the mandible along the apex-crown axis and analyzed the canal morphology, based on Fan's categorization criterion, at 2 mm, 5 mm, and 8 mm to the apical level. Grooves on the lingual and buccal sides were also recorded.

RESULTS

The proportion of C-shaped roots among ancient samples on the left and right sides were 48.57 % (17/35 teeth) and 54.55 % (18/33 teeth), respectively, and 51.47 % (35/68 teeth) in the total sample. Conversely, in the control group, 44.12 % (15/34) and 38.24 % (13/34) occurred on the left and right sides, respectively, and 41.18 % (28/68) in the total sample. Among the C-shaped canals from the Jiaojia site samples, the classification type changed between two adjacent levels in 84.31 % of samples. Approximately 35 (51.5 %) teeth had a fused root, 20 (29.41 %) had one shallow buccal and one deep lingual groove. The occurrence of C-shape variation was not significantly correlated with time (p＞0.05).

CONCLUSIONS

This study identified a high rate of C-shaped root canals among individuals of Jiaojia who lived approximately 5000 years ago.

Age-dependent root canal instrumentation techniques: a comprehensive narrative review

The aim of this article was to review age-dependent clinical recommendations for appropriate root canal instrumentation techniques. A comprehensive narrative review of canal morphology, the structural characteristics of dentin, and endodontic outcomes at different ages was undertaken instead of a systematic review. An electronic literature search was carried out, including the Medline (Ovid), PubMed, and Web of Science databases. The searches used controlled vocabulary and free-text terms, as follows: 'age-related root canal treatment,' 'age-related instrumentation,' 'age-related chemo-mechanical preparation,' 'age-related endodontic clinical recommendations,' 'root canal instrumentation at different ages,' 'geriatric root canal treatment,' and 'pediatric root canal treatment.' Due to the lack of literature with practical age-based clinical recommendations for an appropriate root canal instrumentation technique, a narrative review was conducted to suggest a clinical algorithm for choosing the most appropriate instrumentation technique during root canal treatment. Based on the evidence found through the narrative review, an age-related clinical algorithm for choosing appropriate instrumentation during root canal treatment was proposed. Age affects the morphology of the root canal system and the structural characteristics of dentin. The clinician's awareness of root canal morphology and dentin characteristics can influence the choice of instruments for root canal treatment.

Comparison of continuous wave and cold lateral condensation filling techniques in 3D printed simulated C-shape canals instrumented with Reciproc Blue or Hyflex EDM

Aim

To compare the efficiency of continuous wave obturation and cold lateral condensation techniques and filling time in C-shape canals of 3-dimensional (3D)-printed resin teeth shaped with Reciproc Blue (VDW) or Hyflex EDM (Coltene/Whaledent).

Methodology

One tooth with C1-type orifice and root canal morphology and one with C2-type orifice and C2-C3 root canal morphology were selected based on CBCT. Two replicas of selected teeth were manufactured with a 3D-printer and their canals were instrumented with Reciproc Blue or Hyflex EDM. These 4 instrumented replicas were scanned with CBCT. Identical 10 replicas of each group (total of 40) were produced using a 3D-printer and randomly divided into 2 groups (n = 5), root filled with either continuous wave obturation (CW) or cold lateral condensation (LC). Horizontal cross-sections of C1-type were made at 2, 4, 6, 8 mm and C2-type at 2, 4, 6 mm from the apical foramen. Gutta-percha, sealer and void areas were evaluated with image analysis sofware. Data were analysed using nonparametric Kruskal-Wallis and Mann Whitney-U tests and the Factorial ANOVA was used for interaction effects. Time required to fill canals was evaluated using the Mann-Whitney U test.

Results

For C1-type, LC had more gutta-percha and less sealer compared to CW in 2-mm sections (p<0.05). CW had greater percentages of gutta-percha and lower percentages of sealer compared with LC group in 4, 6, 8 mm sections and total area (p<0.05). LC group had higher percentages of voids compared to CW group in 2 and 4 mm sections (p<0.05). For C2-type, CW had more gutta-percha and less sealer versus LC group in all sections and total area (p<0.05). LC had the least gutta-percha and greatest sealer percentages at 6-mm sections (p<0.05). There was no statistically significant difference in the percentages of voids at any level of sections between the filling techniques (p>0.05). In both C-types, there was no significant difference in the percentages of gutta-percha, sealer and voids between Reciproc Blue and Hyflex EDM-shaped groups at any level (p>0.05). Time spent for the LC technique and filling C1-type was significantly longer than when using the CW technique and filling C2-type (p<0.05).

Conclusions

Continuous wave obturation was more effective than lateral condensation in both C1- and C2-type, except for the apical 2 mm section of C1-type, suggesting the need for a modified CW technique.

Prevalence of C-shaped mandibular molars in the Portuguese population evaluated by cone-beam computed tomography

Objective:

The purpose of this study was to evaluate the prevalence of first and second C-shaped mandibular molars in a Western European population of Portuguese Caucasians.

Materials and Methods:

Patients having both routine panoramic radiograph and presurgical cone-beam computed tomography (CBCT) exams were selected. The CBCT examination was performed at five different axial levels and the mandibular molars were classified as C-shape according to the Fan criteria. Differences between genders, age groups, left and right side, type of tooth, and root concavity side were determined. The molars were classified as nonfused roots (NFRI–II), FRI–III, or single root with single canal (SS) groups, using the panoramic radiograph. The prevalence of C-shaped anatomy was calculated to each group.

Results:

A total of 1783 teeth (695 first molars and 1088 second molars) from 792 patients were included in the study. The prevalence of C-shaped configurations was 0.6% and 8.5% to mandibular first and second molars, respectively. The differences between gender, teeth, and root concavity direction were considered statistically significant (P < 0.05). The FR had a significantly higher rate of C-shapes when compared to NFR (P < 0.05). Intrarater reliability was 93.6%.

Conclusions:

The FR radiographic appearance may be considered a predictor of this anatomy. Second mandibular molars and females had a higher incidence ratio. Apparently, the mandibular C-shaped anatomy is more common in the population of this study than that has been previously reported for the European population.

Racial predilection of C-shaped canal configuration in the mandibular second molar

Aim:

The purpose of this article is to determine the racial predilection of C-shaped canal configuration in a mandibular second molar.

Background:

Unusual root canal anatomy always poses a diagnostic and treatment challenge. Identification of such variation is important for the success of root canal treatment outcome. C-shaped canal configuration is such an aberrant morphology of molar teeth that vary in different population and is commonly seen in a mandibular second molar. Thus, knowledge of racial predilection of C-shaped canal configuration in different population for early diagnosis is obligatory.

Materials and Methods:

An exhaustive search was undertaken to identify published research articles related to C-shaped canal configuration in mandibular second molars. Forty-three research articles were analyzed which included 12,481 mandibular second molars. Chi-square test using value of P < 0.05 was performed to assess the statistical significance of this anomalous anatomic variation among the different population.

Results:

Statistical test revealed a significant variation between the Asian and nonAsian population. The highest incidence of racial predilection was observed in China (Asia) with 93.1%, and the minimum was observed in America with 2.7%.

Conclusion:

This research reported that racial predilection of C-shaped canal configuration in mandibular second molar varies significantly.

C-shaped root canals of mandibular second molars in a Korean population: a CBCT analysis

Objectives

The purpose of this study was to investigate the C-shaped root canal anatomy of mandibular second molars in a Korean population.

Materials and Methods

A total of 542 teeth were evaluated using cone-beam computed tomography (CBCT). The canal shapes were classified according to a modified version of Melton's method at the level where the pulp chamber floor became discernible.

Results

Of the 542 mandibular second molars, 215 (39.8%) had C-shaped canals, 330 (53%) had 3 canals, 17 (3.3%) had 2 canals, 12 (2.2%) had 4 canals, and 8 (1.7%) had 1 canal. The prevalence of C-shaped canals was 47.8% in females and 28.4% in males. Seventy-seven percent of the C-shaped canals showed a bilateral appearance. The prevalence of C-shaped canals showed no difference according to age or tooth position. Most teeth with a C-shaped canal system presented Melton's type II (45.6%) and type III (32.1%) configurations.

Conclusions

There was a high prevalence of C-shaped canals in the mandibular second molars of the Korean population studied. CBCT is expected to be useful for endodontic diagnosis and treatment planning of mandibular second molars.

Prevalence of C-shaped canal system in mandibular first and second molars in a Saudi population assessed via cone beam computed tomography: a retrospective study

OBJECTIVES

The purpose of this study was to determine the prevalence of the C-shaped root canal configuration, location of the longitudinal groove, sex differences, and unilateral/bilateral presence in mandibular first and second molars in a Saudi population using cone beam computed tomography (CBCT).

MATERIALS AND METHODS

CBCT images for the mandibular first and second molars of 487 patients (a total of 529 first molars and 681 s molars) were evaluated. The teeth were assessed for the presence of C-shaped root canals according to Fan criteria. Subdivisions were also made according to sex, direction of the longitudinal groove, and unilateral/bilateral presence.

RESULTS

Only one C-shaped mandibular first molar was observed (0.19%), whereas 62 second molars (9.1%) exhibited C-shaped anatomy. Unilateral presence of the C-shaped root canal system was more common (53.85%). Female patients had a higher prevalence than males. Longitudinal grooves were most commonly found on the root lingual surface (58.1%).

CONCLUSIONS

The prevalence of the C-shaped canal configuration in a Saudi Arabian population was 0.19% in the mandibular first molar and 9.1% in the mandibular second molar. Longitudinal groove prevalence was highest on the lingual surface. Women had a significantly higher prevalence of the C-shaped canal configuration than men. Patients with unilateral presence of the C-shaped canal configuration were more common than those with bilateral presence.

CLINICAL RELEVANCE

Tooth type, patient sex, and ethnicity can help clinicians predict the prevalence of the C-shaped canal system in mandibular molars.

C-shaped canals-prevalence and root canal configuration by cone beam computed tomography evaluation in first and second mandibular molars-a cross-sectional study

OBJECTIVES

C-shaped root canal configuration is an unusual root canal morphology and one of the most often anatomical variations in root canal systems of second mandibular molars. The purpose of this study was to assess the prevalence, symmetry and configuration of C-shaped canals in first and second mandibular molars in an Israeli population using cone beam computed tomography (CBCT).

MATERIALS AND METHODS

One thousand twenty Israel patients' CBCT scans were screened and evaluated. First and second mandibular molars with C-shaped canals were identified. Prevalence configuration along the root and symmetry were analyzed, and new radicular groove classification was proposed.

RESULTS

Total of 1465 mandibular second molars and 1229 mandibular first molars were evaluated. The overall prevalence of C-shaped canals in first and second mandibular molars was 0.16 and 4.6%, respectively. No significant difference was found by gender or side of occurrence. The unilateral prevalence of C-shaped canals in mandibular second molars was 55%. C-shaped canal configuration changed along the root in 63% of the cases.

CONCLUSIONS

The prevalence of C-shaped canals in first and second mandibular molars in the Israeli population is low in comparison to other subpopulations. Clinicians should be aware of the possible asymmetry, different configuration along the root, and the location of danger zone of this anatomic variation during clinical work.

CLINICAL RELEVANCE

CBCT is an efficient three dimensional radiographic examination for evaluation of C-shape root canal configuration. CBCT may help the clinicians during clinical work for considering appropriate cleaning, shaping, and obturation technique according to the characteristic of C-shape root canal configuration.

Differentiation of root canal morphology – a review of the literature

The morphological diversity of the inner anatomy of root canals in human permanent teeth is an issue mainly described in endodontics research. In recent years, it is a relatively new point in anthropological studies because it varies by sex, geographic and ethnic circumstances. An unusual number of root canals or their specific systems can differentiate populations around the world. The multiplicity of available methods for detecting root canal systems helps to better understand their complexity; however, most cannot be applied to anthropology due to limitations that occur in the bioarcheological material. Thorough knowledge of the heterogeneity and internal anatomy of the root canals supplies numerous classification systems proposed and improved over the years by many authors. A limited number of studies in the anthropological literature and future research will shed light onto the internal tooth morphology in historical populations. The aim of this paper is to describe various classification systems of root canals applied in endodontics. However, due to the often poor state of preservation and damage of archaeological derived remains, it seems that the best method is the approach that is the simplest and least complicated.

Radicular anatomy of permanent mandibular second molars in an Iranian population: A preliminary study

Background:

Root morphology is of utmost importance to endodontic sciences. Since there are a few studies on the morphology of mandibular second molars' roots, and some anatomical variables are not evaluated before, the aim of this study was to investigate thoroughly radicular anatomy of this tooth.

Materials and Methods:

This ex vivo study was performed on 150 intact mandibular second molars. After access cavity preparation and ensuring canal patency, Indian ink was injected into root canals from the orifices. The teeth became transparent using methyl salicylate storage. Then, they were inspected by an endodontist under a ×10 stereomicroscope regarding numerous root morphological variables. Data were analyzed using chi-square test and analysis of variance (α = 0.05).

Results:

About 86.7% of teeth had two roots and 13.3% were single-rooted (P = 0.0001), of which, 50% were C-shaped (6.7% of all teeth, P = 0.0001). 86.7% of mesial roots were double canalled, whereas 75.3% of distal roots were single canalled (P = 0.0001). 71.45% and 95.3% of the mesial and distal roots had one apical foramen, respectively (P = 0.0001). Apical foramens were mostly central followed by lingual in most cases. Distances between apical foramen and apical constriction ranged between 0.27 and 0.40 mm (P = 0.0545). Distances between apical foramen and root apices ranged between 0.30 and 0.47 mm (P = 0.0001). Vertucci classifications of mesial canals were Type II in 62.6% and Type IV in 37.4%. 86.2% of single-canal distal roots were Type I. 66.7% of double-canal distal roots were Type II and 33.3% were Type IV (P = 0.0001). The mean root lengths from cervical to apex of mesial, distal, and single roots were 14.02 ± 0.85 (95% confidence interval [CI] = 13.87–14.17), 13.35 ± 0.91 (95% CI = 13.19–13.50), and 14.25 ± 0.72 mm (95% CI = 13.91–14.58), respectively. The extents of canal curvatures varied between 20° and 31° buccolingually (P = 0.0000), and between 19° and 27° mesiodistally (P = 0.0000).

Conclusion:

There was a considerable rate of eccentric apical foramen in mandibular second molars.

Endodontic management of C-shaped root canal system of mandibular first molar by using a modified technique of self-adjusting file system

AIM

C-shaped canal system is a seldom-found root canal anatomy which displays a challenge in all stages of endodontic treatment. According to the literature, this type of canal morphology is not a common finding in the mandibular first molar teeth.

BACKGROUND

This case report presents endodontic management of a mandibular first molar with a C-shaped canal system.

CASE REPORT

Root canal system was cleaned and shaped by nickel-titanium (NiTi) rotary instruments combined with self-adjusting file (SAF). Obturation was performed using warm, vertical condensation combined with the injection of warm gutta-percha. Follow-up examination 12 months later showed that the tooth was asymptomatic. The radiological findings presented no signs of periapical pathology.

CLINICAL SIGNIFICANCE

The clinician must be aware of the occurence and complexity of C-shaped canals in mandibular first molar teeth to perform a successful root canal treatment. The supplementary use of SAF after application of rotary instruments in C-shaped root canals might be a promising approach in endodontic treatment of this type of canal morphology.

Aetiology, incidence and morphology of the C-shaped root canal system and its impact on clinical endodontics

The C-shaped root canal constitutes an unusual root morphology that can be found primarily in mandibular second permanent molars. Due to the complexity of their structure, C-shaped root canal systems may complicate endodontic interventions. A thorough understanding of root canal morphology is therefore imperative for proper diagnosis and successful treatment. This review aims to summarize current knowledge regarding C-shaped roots and root canals, from basic morphology to advanced endodontic procedures. To this end, a systematic search was conducted using the MEDLINE, BIOSIS, Cochrane Library, EMBASE, Google Scholar, Web of Science, PLoS and BioMed Central databases, and many rarely cited articles were included. Furthermore, four interactive 3D models of extracted teeth are introduced that will allow for a better understanding of the complex C-shaped root canal morphology. In addition, the present publication includes an embedded best-practice video showing an exemplary root canal procedure on a tooth with a pronounced C-shaped root canal. The survey of this unusual structure concludes with a number of suggestions concerning future research efforts.

C-shaped root canal configuration: A review of literature

The aim is to review and discuss the etiology, incidence, anatomic features, classification, diagnosis and management of the C-shaped canal configuration. C-shaped canal configuration is a variation that has a racial predilection and is commonly seen in mandibular second molars. The intricacies present in this variation of canal morphology can pose a challenge to the clinician during negotiation, debridement and obturation. Manual and electronic searches of literature were performed from 1979 to 2012, in Pub Med by crossing the keywords: C-shaped canals, mandibular second molar, mandibular first premolar, root canal morphology. Knowledge of the C-shaped canal configuration is essential to achieve success in endodontic therapy. Radiographic and clinical diagnoses can aid in identification and negotiation of the fan-shaped areas and intricacies of the C-shaped anatomy. Effective management of this anomalous canal configuration can be achieved with rotary and hand instrumentation assisted with sonics and ultrasonics. Modifications in the obturation techniques will ensure a 3-dimensional fill of the canal system and chamber retained restorations like amalgam or composites, serve as satisfactory post endodontic restorations.

Anatomic and diagnostic challenges of C-shaped root canal system

Successful root canal treatment depends on the thorough management of the canal anatomy. The use of periapical radiographs is essential to identify and monitor the canal's morphological variations. The C-shaped single canaled man-dibular 2nd molar probably requires a different regimen of treatment from the two rooted, three canaled version, as it is rare. Because of the importance of its true diagnosis and treatment, a comprehensive review of published information and investigations about it in addition to approaches for its treatment is necessary. In this article, a detailed review and three case reports with different C-shaped canal configurations have been described which were successfully negotiated, pre­pared and obturated.

How to cite this article: Raisingani D, Gupta S, Mital P, Khullar P. Anatomic and Diagnostic Challenges of C-Shaped Root Canal System. Int J Clin Pediatr Dent 2014;7(1):35-39.

Incidence of C-shaped root canal systems in mandibular second molars in the native Chinese population by analysis of clinical methods

The aims of the study were to investigate the incidence of C-shaped root canal systems in mandibular second molars in a native Chinese population using radiography and clinical examination under microscope and to compare the relative efficacies of these methods. For the recognition of C-shaped root canal system, 1 146 mandibular second molars were selected and examined. Teeth with C-shaped canal systems were categorized by using the radiographic classification criteria and the modified Melton's method. C-shaped canals were identified in 397 (34.64%) mandibular second molars by radiography (type I, 31.23% type II, 38.29% type III, 30.48%). Clinical examination showed that 449 (39.18%) cases exhibited C-shaped canal systems (C1, 22.94% C2, 48.11% C3a, 15.59% C3b, 13.36%). As for the result of the radiographic and clinical combined examination, C-shaped root canals were found in 473 (41.27%) mandibular second molars (C1, 21.78% C2, 45.67% C3a, 16.70% C3b, 15.86%). The incidence of C-shaped root canal diagnosed by radiographic method was statistically different from that by clinical examination and the combined examination (P<0.05). The study indicated a high incidence of C-shaped canal system in a Chinese population. The combination of microscopic and radiographic examination is an effective method in identifying the C-shaped root canal system.

Root canal configuration and the prevalence of C-shaped canals in mandibular second molars in an Iranian population

A total of 139 extracted mandibular second molars were injected with India ink and demineralized. They were made clear and transparent with methyl salicylate, and the anatomy of their canals was studied. It was found that 86.3% of mandibular second molars had two roots, 9.3% had one root, and 4.3% had three roots. Ninety percent of the mesial roots of the mandibular second molars with two roots had two canals (predominantly with a type II or III configuration), and 77.5% of the distal roots of these teeth had one canal (predominantly with a type I configuration). Among the mandibular second molars, 7.2% had C-shaped canals and these configurations were seen mostly in single-rooted mandibular second molars. The results of this study indicate that mandibular second molar teeth have many variations in the number of roots and the morphology of their canals. Therefore it should not be assumed that all mandibular second molar teeth have two roots and three canals.

Root and canal morphology of permanent mandibular molars in a Sudanese population

AIM

To investigate variations in the root canal systems of first and second permanent mandibular molar teeth in a Sudanese population using a clearing technique.

METHODOLOGY

Two hundred extracted first and second permanent mandibular molars from three cities in the state of Khartoum were studied. Access cavities were prepared and pulp tissue was removed by immersion in 5% sodium hypochlorite under ultrasonication; Indian ink was then injected into the root canal systems assisted by a vacuum applied apically. The teeth were rendered clear by demineralization and immersion in methyl salicylate before evaluation. The following observations were made (i) number of roots and their morphology; (ii) number of root canals per tooth; (iii) number of root canals per root and (iv) root canal configuration.

RESULTS

Overall 59% of mandibular first molars had four canals with 3% having a third distolingual root. Seventy-eight per cent of second mandibular molars had two separate flat roots, whilst 10% were C-shaped. The most common canal system configurations were type IV (73%) and type II (14%). Inter-canal communications were more common in the mesial roots. The prevalence of inter-canal communications was 65% in first molars and 49% in second molars.

CONCLUSIONS

In this sample of Sudanese teeth, 59% of the mandibular first permanent molars had four root canals whilst 10% of the mandibular second molars had C-shaped roots/canals.

The C-shaped root canal configuration: a review

Recognition of unusual variations in the canal configuration is critical because it has been established that the root with a single tapering canal and apical foramen is the exception rather than the rule. The early recognition of these configurations facilitates cleaning, shaping, and obturation of the root canal system. "C" configuration, which is an important anatomic variation, presents a thin fin connecting the root canals. Because of the importance of its true diagnosis and treatment, a comprehensive review of published information and investigations about it in addition to approaches for its treatment is necessary.

C-shaped Canal System in Mandibular Second Molars Part IV: 3-D Morphological Analysis and Transverse Measurement

The purpose of this study was to investigate three-dimensional (3-D) morphology of C-shaped root canal system using micro-computed tomography (microCT) and 3-D reconstruction. There were 102 extracted mandibular second molars with fused roots collected from a native Chinese population. The teeth were scanned by microCT and reconstructed by 3-D software. The 98 teeth that possessed a C-shaped canal system were further analyzed. The 3-D reconstructed images of canals were classified into three categories: merging type (type I), symmetrical type (type II), and asymmetrical type (type III). The cross-sectional images of each tooth were submitted to computer analysis, and the minimum canal wall thickness was measured. In these 98 molars, 32 (32.65%) teeth showed a merging type appearance, 38 (38.78%) a symmetrical type and 28 (28.57%) an asymmetrical type. The minimum canal wall thickness in type I was thicker than that in type II or type III in the apical and middle portion (p < 0.05). Being fully aware of the configuration of C-shaped root canal system and the location of minimum wall thickness will ensure more efficient root canal treatment.

Anatomical study of C-shaped canals in mandibular second molars by analysis of computed tomography

The aim of this study was to investigate the prevalence and configuration of the C-shaped canal using serial axial computed tomography images of the mandibular second molars that had not been restored severely or treated endodontically, and to compare the thickness of the remaining tooth structure from the center of the canal to the outer surface of the deepest groove area in C-shaped mandibular second molar to that of "danger zone of perforation" in normal mandibular second molar. This distance was measured at the cervical, middle, and apical third level each. From 220 teeth, C-shaped canals were found in 98 teeth (44.5%). Almost all the grooves were directed lingual (99%). The continuous C-shaped canal was the most frequently found (49%) and the separated canal was the least (17.4%). The thinnest remaining tooth structure in the groove area of the C-shaped mandibular second molar was not different from that of the danger zone of normal mandibular second molar at the three levels (p > 0.05).

Spiral computed tomographic demonstration of C-shaped canals in mandibular second molars

OBJECTIVES

The aim of this study was to evaluate the prevalence of C-shaped canals in single rooted mandibular second molars with spiral computed tomographic imaging in detail.

METHODS

One hundred and twelve single-rooted mandibular second molar samples were selected from 491 extracted mandibular second molars. The teeth were scanned by spiral computed tomographic technique to examine canal configurations.

RESULTS

The evaluation criteria of the shape of roots was based on Manning's category as round, oval and C-shaped. The prevalence of C-shaped canals was found to be 8.1% in mandibular second molars. The evaluation of the root canal configurations of C-shaped mandibular second molars with single roots (40 teeth) was based on Vertucci's classification. Vertucci type I canals were most frequently seen in C-shaped mandibular second molars (40%). Additionally, we disclosed three additional canal types.

CONCLUSION

Results of this study demonstrated that high resolution visualization of the root canal shape can be achieved by spiral computed tomographic imaging.