Biochemical characterization, molecular cloning and expression of laccases - a divergent gene family - in poplar

The Analysis, Description, and Examination of the Maize LAC Gene Family's Reaction to Abiotic and Biotic Stress

Laccase (LAC) is a diverse group of genes found throughout the plant genome essential for plant growth and the response to stress by converting monolignin into intricate lignin formations. However, a comprehensive investigation of maize laccase has not yet been documented. A bioinformatics approach was utilized in this research to conduct a thorough examination of maize (Zea mays L.), resulting in the identification and categorization of 22 laccase genes (ZmLAC) into six subfamilies. The gene structure and motifs of each subgroup were largely consistent. The distribution of the 22 LAC genes was uneven among the maize chromosomes, with the exception of chromosome 9. The differentiation of the genes was based on fragment replication, and the differentiation time was about 33.37 million years ago. ZmLAC proteins are primarily acidic proteins. There are 18 cis-acting elements in the promoter sequences of the maize LAC gene family associated with growth and development, stress, hormones, light response, and stress response. The analysis of tissue-specific expression revealed a high expression of the maize LAC gene family prior to the V9 stage, with minimal expression at post-V9. Upon reviewing the RNA-seq information from the publicly available transcriptome, it was discovered that ZmLAC5, ZmLAC10, and ZmLAC17 exhibited significant expression levels when exposed to various biotic and abiotic stress factors, suggesting their crucial involvement in stress responses and potential value for further research. This study offers an understanding of the functions of the LAC genes in maize's response to biotic and abiotic stress, along with a theoretical basis for comprehending the molecular processes at play.

Histochemical Detection of Peroxidase and Laccase Activities in Populus Secondary Xylem

Peroxidases (PRXs) and laccases (LACs) are enzymes involved in catalyzing the oxidation of the lignin monomers to facilitate lignin polymerization. However, due to the large number of genes composing these two families of enzymes, many details regarding their specific localization are only partially understood. Here, we present a fast and easy histochemical method that makes use of the artificial substrate 3,3',5,5'-tetramethylbenzidine (TMB) to visualize PRX and LAC activities in the hybrid aspen (Populus tremula x P. tremuloides) xylem tissue. In addition, we describe a protocol that allows the detection of the PRX substrate, H2O2, using the nonfluorescent dye 2',7'-dichlorodihydrofluorescein diacetate (H2DCFDA) in woody tissues.

Contribution of the LAC Genes in Fruit Quality Attributes of the Fruit-Bearing Plants: A Comprehensive Review

Laccase genes produce laccase enzymes that play a crucial role in the production of lignin and oxidation reactions within plants. Lignin is a complex polymer that provides structure and toughness to the cell walls of numerous fruit plants. The LAC genes that encode laccase enzymes play vital roles in plant physiology, including the synthesis of pigments like PA that contribute to the colors of fruits, and in defending against pathogens and environmental stresses. They are crucial for fruit development, ripening, structural maintenance in plants, and adaptation to various environmental factors. As such, these genes and enzymes are essential for plant growth and development, as well as for various biotechnological applications in environmental remediation and industrial processes. This review article emphasizes the significance of genes encoding laccase enzymes during fruit growth, specifically pertaining to the strengthening of the endocarp through lignification. This process is crucial for ensuring fruit defense and optimizing seed scattering. The information gathered in this article will aid breeders in producing future fruit-bearing plants that are resistant to disease, cost-effective, and nutrient-rich.

Genetic mapping of QTLs controlling brown seed coat traits by genome resequencing in sesame (Sesamum indicum L.)

INTRODUCTION

Sesame seeds have become an irreplaceable source of edible oils and food products with rich nutrients and a unique flavor, and their metabolite contents and physiological functions vary widely across different seed coat colors. Although the quantitative trait loci (QTLs) for genetic variation in seed coat color have been extensively investigated, the identification of unique genetic loci for intermediate colors such as brown has not been reported due to their complexity.

METHODS

Here, we crossed the white sesame 'Yuzhi No. 8' (YZ8) and the brown sesame 'Yanzhou Erhongpi' (YZEHP) to construct a recombinant inbred line (RIL) population with consecutive self-fertilization for ten generations.

RESULTS

The selfed F1 seeds were brown which was controlled by a dominant gene. Based on the genotyping by whole-genome resequencing of the RILs, a major-effect QTL for brown coat color was identified through both bulk segregant analysis (BSA) and genetic linkage mapping in sesame, which was located within a 1.19 Mb interval on chromosome 6 (qBSCchr6). Moreover, we found that the YZEHP seed coat initially became pigmented at 20 days post-anthesis (DPA) and was substantially colored at 30 DPA. We screened 13 possible candidate genes based on the effects of genetic variants on protein coding and predicted gene functions. Furthermore, qRT‒PCR was used to verify the expression patterns of these genes in different post-anthesis developmental periods. We noted that in comparison to YZ8 seeds, YZEHP seeds had expression of SIN_1023239 that was significantly up-regulated 2.5-, 9.41-, 6.0-, and 5.9-fold at 15, 20, 25, and 30 DPA, respectively, which was consistent with the pattern of brown seed coat pigment accumulation.

DISCUSSION

This study identified the first major-effect QTL for the control of the brown seed coat trait in sesame. This finding lays the foundation for further fine mapping and cloning as well as investigating the regulatory mechanism of seed coat color in sesame.

Different combinations of laccase paralogs nonredundantly control the amount and composition of lignin in specific cell types and cell wall layers in Arabidopsis

Vascular plants reinforce the cell walls of the different xylem cell types with lignin phenolic polymers. Distinct lignin chemistries differ between each cell wall layer and each cell type to support their specific functions. Yet the mechanisms controlling the tight spatial localization of specific lignin chemistries remain unclear. Current hypotheses focus on control by monomer biosynthesis and/or export, while cell wall polymerization is viewed as random and nonlimiting. Here, we show that combinations of multiple individual laccases (LACs) are nonredundantly and specifically required to set the lignin chemistry in different cell types and their distinct cell wall layers. We dissected the roles of Arabidopsis thaliana LAC4, 5, 10, 12, and 17 by generating quadruple and quintuple loss-of-function mutants. Loss of these LACs in different combinations led to specific changes in lignin chemistry affecting both residue ring structures and/or aliphatic tails in specific cell types and cell wall layers. Moreover, we showed that LAC-mediated lignification has distinct functions in specific cell types, waterproofing fibers, and strengthening vessels. Altogether, we propose that the spatial control of lignin chemistry depends on different combinations of LACs with nonredundant activities immobilized in specific cell types and cell wall layers.

Transcriptomic and Metabolomic Analysis Reveals a Protein Module Involved in Pre-harvest Apple Peel Browning

Peel browning is a natural phenomenon that adversely affects the appearance of fruits. Research on the regulation of browning in apples (Malus × domestica Borkh.) has mainly focused on post-harvest storage, while studies at the pre-harvest stage are relatively rare. Apple is an economically important horticultural crop prone to peel browning during growth, especially when the fruits are bagged (dark conditions). The present study's integrated transcriptomics and metabolomics analysis revealed that pre-harvest apple peel browning was primarily due to changes in phenolics and flavonoids. The detailed analysis identified MdLAC7's (laccase 7) role in the pre-harvest apple peel browning process. Transient injection, overexpression, and CRISPR/Cas9 knockout of the MdLAC7 gene in apple fruit and calli identified vallinic acid, anthocyanidin, tannic acid, sinapic acid, and catechinic acid as its catalytic substrates. In addition, yeast one-hybrid (Y1H) assay, electrophoretic mobility shift assay (EMSA), luciferase (LUC) reporter assay, and ChIP-PCR analysis revealed that MdWRKY31 binds to the promoter of MdLAC7 and positively regulates its activity to promote peel browning of bagged fruits (dark conditions). Interestingly, upon light exposure, the light-responsive transcription factor MdHY5 (ELONGATED HYPOCOTYL 5) bound to the promoter of MdWRKY31 and inhibited the gene's expression, thereby indirectly inhibiting the function of MdLAC7. Subsequent analysis showed that MdHY5 binds to the MdLAC7 promoter at the G-box1/2 site and directly inhibits its expression in vivo. Thus, the study revealed the MdLAC7-mediated mechanism regulating pre-harvest apple peel browning and demonstrated the role of light in inhibiting MdLAC7 activity and subsequently reducing peel browning. These results provide theoretical guidance for producing high-quality apple fruits.

Small RNA Sequencing Revealed that miR4415, a Legume-Specific miRNA, was Involved in the Cold Acclimation of Ammopiptanthus nanus by Targeting an L-Ascorbate Oxidase Gene and Regulating the Redox State of Apoplast

MicroRNAs (miRNAs) are small endogenous single-stranded RNAs that regulate plant growth, development, and environmental stress response posttranscriptionally. Ammopiptanthus nanus, a rare evergreen broad-leaved shrub in the temperate area of Central Asia, can tolerate freezing stress as low as -30 degrees centigrade in winter, and miRNA might be involved in the cold acclimation which enables A. nanus to obtain tolerance to freezing stress. Systematic identification and functional analysis of the miRNAs involved in the cold acclimation in A. nanus may promote understanding of the miRNA-mediated gene regulation network underlying cold acclimation. Here, based on small RNA and degradome sequencing, 256 miRNAs and 1,808 miRNA-target pairs were identified in A. nanus. A total of 39 cold-responsive miRNAs were identified, of which 29 were upregulated and ten were downregulated. These cold-responsive miRNAs may participate in the cold acclimation by regulating redox homeostasis (miR398, miR4415, and miR408), calcium signaling (miR5225 and miR5211), growth and development (miR159 and miR390), and small RNA-mediated gene silencing (miR168 and miR1515). We found that miR4415, a legume-specific miRNA, is involved in the cold acclimation of A. nanus by targeting an L-ascorbate oxidase gene and then regulating the redox state of the apoplast. Our study provides important data for understanding the regulatory role of miRNA in the cold acclimation of A. nanus.

Identification of a novel laccase gene EuLAC1 and its potential resistance against Botrytis cinerea

In this study, a novel laccase gene, EuLAC1, was cloned from Eucommia ulmoides Oliver (E. ulmoides). An overexpression vector harboring the EuLAC1 was constructed and introduced into the tobacco (Nicotiana tabacum cv. Xanthi). The laccase activity, resistance to Botrytis cinerea (B. cinerea) and lignin level in wild-type and transgenic plants were thereafter investigated. Interestingly, the transgenic tobacco displayed a significantly higher laccase activity and resistance to gray mold as compared to the wild-type tobacco. Additionally, the lignin contents in the leaves and stems of the transgenic tobacco were significantly higher in comparison to the wild-type tobacco. Scanning electron microscopy was used to observe the cross sections of wild-type and transgenic tobacco stems and it was noted that the cell wall near the xylem catheter of the transgenic tobacco was substantially thicker and the outline clearer than that of the wild-type. Thus, the EuLAC1 gene can significantly increase laccase activity and lignin content in tobacco, leading to an increase in the physical defenses, thereby increasing tobacco resistance to gray mold.

DkmiR397 Regulates Proanthocyanidin Biosynthesis via Negative Modulating DkLAC2 in Chinese PCNA Persimmon

Persimmon fruits accumulate a large amount of proanthocyanidins (PAs), which makes an astringent sensation. Proanthocyanidins (PAs) are the polymers of flavan-3-ols stored in plant vacuoles under laccase activation. A laccase gene, DkLAC2, is putatively involved in PAs biosynthesis and regulated by microRNA (DkmiR397) in persimmon. However, the polymerization of PAs in association with miRNA397 still needs to be explored in persimmon. Here, we identified pre-DkmiR397 and its target gene DkLAC2 in ‘Eshi 1’ persimmon. Histochemical staining with GUS and dual luciferase assay both confirmed DkmiR397-DkLAC2 binding after co-transformation in tobacco leaves. Diverse expression patterns of DkLAC2 and DkmiR397 were exhibited during persimmon fruit development stages. Moreover, a contrasting expression pattern was also observed after the combined DkLAC2-miR397 transformation in persimmon leaves, suggesting that DkmiR397 might be a negative regulator of DkLAC2. Similarly, the transient transformation of DkmiR397 in persimmon fruit discs in vitro also reduced PA accumulation by repressing DkLAC2, whereas the up-regulation of DkLAC2 increased the accumulation of PAs by short tandem target mimic STTM-miR397. A similar expression pattern was observed when overexpressing of DkLAC2 in Arabidopsis wild type (WT) and overexpression of DkLAC2, DkmiR397 in persimmon leaf callus. Our results revealed that the role of DkmiR397 repressed the expression of DkLAC2 concerning PA biosynthesis, providing a potential target for the manipulation of PAs metabolism in persimmon.

Developmental changes in lignin composition are driven by both monolignol supply and laccase specificity

The factors controlling lignin composition remain unclear. Catechyl (C)-lignin is a homopolymer of caffeyl alcohol with unique properties as a biomaterial and precursor of industrial chemicals. The lignin synthesized in the seed coat of Cleome hassleriana switches from guaiacyl (G)- to C-lignin at around 12 to 14 days after pollination (DAP), associated with a rerouting of the monolignol pathway. Lack of synthesis of caffeyl alcohol limits C-lignin formation before around 12 DAP, but coniferyl alcohol is still synthesized and highly accumulated after 14 DAP. We propose a model in which, during C-lignin biosynthesis, caffeyl alcohol noncompetitively inhibits oxidation of coniferyl alcohol by cell wall laccases, a process that might limit movement of coniferyl alcohol to the apoplast. Developmental changes in both substrate availability and laccase specificity together account for the metabolic fates of G- and C-monolignols in the Cleome seed coat.

Lignin p-Hydroxybenzoylation Is Negatively Correlated With Syringyl Units in Poplar

The lignin found in the cell walls of poplar fibres is decorated with ester-linked p-hydroxybenzoate moieties that originate from the participation of acylated monolignols in lignin polymerisation. Although little is known about the biological implications of these cell-wall constituents, it has historically been postulated that acylated monolignols might promote lignification in syringyl lignin-rich species such as poplar. However, cell-wall-bound p-hydroxybenzoate groups were negatively correlated with syringyl units in a collection of 316 unrelated genotypes of black cottonwood (Populus trichocarpa). Based upon this observation, several alternative hypotheses on the occurrence of lignin acylation are presented.

PbLAC4-like, activated by PbMYB26, related to the degradation of anthocyanin during color fading in pear

BACKGROUND

Decrease in anthocyanin content results in the loss of red color in leaves, petals and receptacles during development. The content of anthocyanin was affected by the biosynthesis and degradation of anthocyanin. Compared with the known detailed mechanism of anthocyanin biosynthesis, the degradation mechanism is not fully investigated. It is vital to study the degradation mechanism of anthocyanin in pear for promoting the accumulation of anthocyanin and inhibiting the red fading in pear.

RESULTS

Here, we reported that laccase encoded by PbLAC4-like was associated with anthocyanin degradation in pear. The expression pattern of PbLAC4-like was negatively correlated with the content of anthocyanin during the color fading process of pear leaves, petals and receptacles. Phylogenetic analysis and sequence alignment revealed that PbLAC4-like played a vital role in anthocyanin degradation. Thus, the degradation of anthocyanin induced by PbLAC4-like was further verified by transient assays and prokaryotic expression. More than 80% of anthocyanin compounds were degraded by transiently over-expressed PbLAC4-like in pear fruitlet peel. The activity of crude enzyme to degrade anthocyanin in leaves at different stages was basically consistent with the expression of PbLAC4-like. The anthocyanin degradation ability of prokaryotic induced PbLAC4-like protein was also verified by enzyme activity assay. Besides, we also identified PbMYB26 as a positive regulator of PbLAC4-like. Yeast one-hybrid and dual luciferase assay results showed that PbMYB26 activated PbLAC4-like expression by directly binding to the PbLAC4-like promoter.

CONCLUSIONS

Taken together, the PbLAC4-like activated by PbMYB26, was involved in the degradation of anthocyanin, resulting in the redness fading in different pear tissues.

Phenoloxidases in Plants-How Structural Diversity Enables Functional Specificity

The metabolism of polyphenolic polymers is essential to the development and response to environmental changes of organisms from all kingdoms of life, but shows particular diversity in plants. In contrast to other biopolymers, whose polymerisation is catalysed by homologous gene families, polyphenolic metabolism depends on phenoloxidases, a group of heterogeneous oxidases that share little beyond the eponymous common substrate. In this review, we provide an overview of the differences and similarities between phenoloxidases in their protein structure, reaction mechanism, substrate specificity, and functional roles. Using the example of laccases (LACs), we also performed a meta-analysis of enzyme kinetics, a comprehensive phylogenetic analysis and machine-learning based protein structure modelling to link functions, evolution, and structures in this group of phenoloxidases. With these approaches, we generated a framework to explain the reported functional differences between paralogs, while also hinting at the likely diversity of yet undescribed LAC functions. Altogether, this review provides a basis to better understand the functional overlaps and specificities between and within the three major families of phenoloxidases, their evolutionary trajectories, and their importance for plant primary and secondary metabolism.

Localised laccase activity modulates distribution of lignin polymers in gymnosperm compression wood

The woody stems of coniferous gymnosperms produce specialised compression wood to adjust the stem growth orientation in response to gravitropic stimulation. During this process, tracheids develop a compression-wood-specific S₂ L cell wall layer with lignins highly enriched with p-hydroxyphenyl (H)-type units derived from H-type monolignol, whereas lignins produced in the cell walls of normal wood tracheids are exclusively composed of guaiacyl (G)-type units from G-type monolignol with a trace amount of H-type units. We show that laccases, a class of lignin polymerisation enzymes, play a crucial role in the spatially organised polymerisation of H-type and G-type monolignols during compression wood formation in Japanese cypress (Chamaecyparis obtusa). We performed a series of chemical-probe-aided imaging analysis on C. obtusa compression wood cell walls, together with gene expression, protein localisation and enzymatic assays of C. obtusa laccases. Our data indicated that CoLac1 and CoLac3 with differential oxidation activities towards H-type and G-type monolignols were precisely localised to distinct cell wall layers in which H-type and G-type lignin units were preferentially produced during the development of compression wood tracheids. We propose that, not only the spatial localisation of laccases, but also their biochemical characteristics dictate the spatial patterning of lignin polymerisation in gymnosperm compression wood.

Effects of Ionic Liquids on Metalloproteins

In the past decade, innovative protein therapies and bio-similar industries have grown rapidly. Additionally, ionic liquids (ILs) have been an area of great interest and rapid development in industrial processes over a similar timeline. Therefore, there is a pressing need to understand the structure and function of proteins in novel environments with ILs. Understanding the short-term and long-term stability of protein molecules in IL formulations will be key to using ILs for protein technologies. Similarly, ILs have been investigated as part of therapeutic delivery systems and implicated in numerous studies in which ILs impact the activity and/or stability of protein molecules. Notably, many of the proteins used in industrial applications are involved in redox chemistry, and thus often contain metal ions or metal-associated cofactors. In this review article, we focus on the current understanding of protein structure-function relationship in the presence of ILs, specifically focusing on the effect of ILs on metal containing proteins.

Purification and characterization of peroxidases from garden cress sprouts and their roles in lignification and removal of phenol and p-chlorophenol

The study aims to evaluate the relation between peroxidases of day-6 garden cress sprouts and phenolic compounds. Three cationic, three anionic, and two unbounded peroxidases were separated from day-6 garden cress sprouts. Cationic (GCP1) and anionic (GCP2) peroxidases were purified with molecular masses of 25 and 40 kDa, respectively. The K_m values of GCP1 toward H₂ O₂ and guaiacol were lower than GCP2. The anionic GCP2 exhibited high affinity toward some lignin monomers, sinapyl alcohol, coniferyl alcohol, cinnamic and ferulic acids. Therefore, GCP2 is considered as a lignin peroxidase and contributed in lignin synthesis. The activity of GCP1 and GCP2 was stable at a wide pH range 5.5-8.0 and 6.0-7.5, respectively. Both peroxidases showed the same thermal stability range 20-50°C. GCP2 was more resistant against the effect of metal ions than GCP1. GCP2 showed high ability to remove of phenol and p-chlorophenol from effluent compared to GCP1. PRACTICAL APPLICATIONS: Generally, garden cress is used as a test plant to conduct biomonitoring of pollution in urban soil on a wide scale because of its simplicity, sensitivity, and cost-effectiveness. Peroxidase is an important antioxidant enzyme, which elevated when plant subjected to pollution. Recently, we reported that the increase of peroxidase activity was strongly correlated with high phenolic content and antioxidant activity during the germination of garden cress. In the present study, anionic peroxidase GCP2 may play an important role in lignification process and removal of phenol and p-chlorophenol from polluted soil/wastewater as well as resisted the harmful effect of heavy metals. Cationic peroxidase GCP1, as a natural scavenger, had high affinity toward H₂ O₂ coupled to oxidation of some plant phenolic compounds suggesting its role in consuming of excess H₂ O₂ .

Structural basis for monolignol oxidation by a maize laccase

Plant laccases catalyse the oxidation of monolignols in lignification, a process reinforcing the cell wall of many different cell types that provide mechanical support, nutrient transportation and defence against pathogens in plants¹. The isozymes display a broad range of substrate preferences. Here, the substrate preference of a laccase (ZmLac3) from Zea mays (maize) was characterized. The crystal structure of ZmLac3 revealed a compact and deep substrate-binding pocket, and the binding modes of sinapyl alcohol (SinA) and coniferyl alcohol (ConA) were solved. On the basis of structural data and kinetics analysis, we propose that the regionalization of polar and hydrophobic surfaces in the binding pocket of ZmLac3 is vital for defining the orientation of SinA/ConA binding. The extra methoxyl group in SinA makes substantial contributions to interactions between SinA and ZmLac3, which are absent in the ZmLac3-ConA complex. In summary, the polar and hydrophobic interactions between SinA/ConA and ZmLac3 determine the binding positions of the monolignols in ZmLac3. These results provide valuable insight about ZmLac3 catalysis and should aid industrial processes that use plant laccases.

Laccase Properties, Physiological Functions, and Evolution

Discovered in 1883, laccase is one of the first enzymes ever described. Now, after almost 140 years of research, it seems that this copper-containing protein with a number of unique catalytic properties is widely distributed across all kingdoms of life. Laccase belongs to the superfamily of multicopper oxidases (MCOs)—a group of enzymes comprising many proteins with different substrate specificities and diverse biological functions. The presence of cupredoxin-like domains allows all MCOs to reduce oxygen to water without producing harmful byproducts. This review describes structural characteristics and plausible evolution of laccase in different taxonomic groups. The remarkable catalytic abilities and broad substrate specificity of laccases are described in relation to other copper-containing MCOs. Through an exhaustive analysis of laccase roles in different taxa, we find that this enzyme evolved to serve an important, common, and protective function in living systems.

Bisaurones – enzymatic production and biological evaluation

The enzyme-catalyzed oxidation of butein afforded four dimers of aurone sulfuretin with cytotoxic and antioxidative properties.

Genome-Wide Identification of the LAC Gene Family and Its Expression Analysis Under Stress in Brassica napus

Lignin is an important biological polymer in plants that is necessary for plant secondary cell wall ontogenesis. The laccase (LAC) gene family catalyzes lignification and has been suggested to play a vital role in the plant kingdom. In this study, we identified 45 LAC genes from the Brassica napus genome (BnLACs), 25 LAC genes from the Brassica rapa genome (BrLACs) and 8 LAC genes from the Brassica oleracea genome (BoLACs). These LAC genes could be divided into five groups in a cladogram and members in same group had similar structures and conserved motifs. All BnLACs contained hormone- and stress- related elements determined by cis-element analysis. The expression of BnLACs was relatively higher in the root, seed coat and stem than in other tissues. Furthermore, BnLAC4 and its predicted downstream genes showed earlier expression in the silique pericarps of short silique lines than long silique lines. Three miRNAs (miR397a, miR397b and miR6034) target 11 BnLACs were also predicted. The expression changes of BnLACs under series of stresses were further investigated by RNA sequencing (RNA-seq) and quantitative real-time polymerase chain reaction (qRT-PCR). The study will give a deeper understanding of the LAC gene family evolution and functions in B. napus.

N-glycans in Toxicodendron vernicifluum lacquer laccase

The N-glycans in Toxicodendron vernicifluum (Rhus vernicifera) lacquer laccase was elucidated for the first time through a combination of enzymatic digestion and subsequent mass spectrometry measurements using LC-MS/MS and MALDI-TOF MS. Lacquer laccase was isolated from a Japanese lacquer acetone powder from consecutive Sephadex C-50 and DEAE A-50 column chromatography. Trypsin and chymotrypsin digestions of the lacquer laccase resulted in a mixture of peptides and N-glycopeptides, which were treated with peptide-N-glycosidases and then N^α-(aminooxyacetyl)tryptophanylarginine methyl ester (aoWR) to give the aoWR-labelled N-glycans. The MS measurements revealed that GlcNAc₄Hex₅Fuc₃Xyl₁ N-glycan was attached at 12 N-glycosylation sites (Asn 5, 14, 180, 194, 233, 274, 284, 347, 364, 381, 398, and 519), GlcNAc₃Hex₄Fuc₂Xyl₁ N-glycan at two sites (Asn 124 and 454), and GlcNAc₃Hex₆Fuc₁Xyl₁ N-glycan at one site (Asn 28). A database search (Mascot search) of the peptides also suggested the presence of N-glycans at the 15 potential N-glycosylation sites (Asn-X-Ser/Thr).

PbrmiR397a regulates lignification during stone cell development in pear fruit

Lignified stone cells substantially reduce fruit quality. Therefore, it is desirable to inhibit stone cell development using genetic technologies. However, the molecular mechanisms regulating lignification are poorly understood in fruit stone cells. In this study, we have shown that microRNA (miR) miR397a regulates fruit cell lignification by inhibiting laccase (LAC) genes that encode key lignin biosynthesis enzymes. Transient overexpression of PbrmiR397a, which is the miR397a of Chinese pear (Pyrus bretschneideri), and simultaneous silencing of three LAC genes reduced the lignin content and stone cell number in pear fruit. A single nucleotide polymorphism (SNP) identified in the promoter of the PbrmiR397a gene was found to associate with low levels of fruit lignin, after analysis of the genome sequences of sixty pear varieties. This SNP created a TCA element that responded to salicylic acid to induce gene expression as confirmed using a cell-based assay system. Furthermore, stable overexpression of PbrmiR397a in transgenic tobacco plants reduced the expression of target LAC genes and decreased the content of lignin but did not change the ratio of syringyl- and guaiacyl-lignin monomers. Consistent with reduction in lignin content, the transgenic plants showed fewer numbers of vessel elements and thinner secondary walls in the remaining elements compared to wild-type control plants. This study has advanced our understanding of the regulation of lignin biosynthesis and provided useful molecular genetic information for improving pear fruit quality.

Xylogenesis in zinnia (Zinnia elegans) cell cultures: unravelling the regulatory steps in a complex developmental programmed cell death event

MAIN CONCLUSION

Physiological and molecular studies support the view that xylogenesis can largely be determined as a specific form of vacuolar programmed cell death (PCD). The studies in xylogenic zinnia cell culture have led to many breakthroughs in xylogenesis research and provided a background for investigations in other experimental models in vitro and in planta . This review discusses the most essential earlier and recent findings on the regulation of xylem elements differentiation and PCD in zinnia and other xylogenic systems. Xylogenesis (the formation of water conducting vascular tissue) is a paradigm of plant developmental PCD. The xylem vessels are composed of fused tracheary elements (TEs)-dead, hollow cells with patterned lignified secondary cell walls. They result from the differentiation of the procambium and cambium cells and undergo cell death to become functional post-mortem. The TE differentiation proceeds through a well-coordinated sequence of events in which differentiation and the programmed cellular demise are intimately connected. For years a classical experimental model for studies on xylogenesis was the xylogenic zinnia (Zinnia elegans) cell culture derived from leaf mesophyll cells that, upon induction by cytokinin and auxin, transdifferentiate into TEs. This cell system has been proven very efficient for investigations on the regulatory components of xylem differentiation which has led to many discoveries on the mechanisms of xylogenesis. The knowledge gained from this system has potentiated studies in other xylogenic cultures in vitro and in planta. The present review summarises the previous and latest findings on the hormonal and biochemical signalling, metabolic pathways and molecular and gene determinants underlying the regulation of xylem vessels differentiation in zinnia cell culture. Highlighted are breakthroughs achieved through the use of xylogenic systems from other species and newly introduced tools and analytical approaches to study the processes. The mutual dependence between PCD signalling and the differentiation cascade in the program of TE development is discussed.

Optimization of laccase production from Marasmiellus palmivorus LA1 by Taguchi method of Design of experiments

BACKGROUND

Fungal laccase has profound applications in different fields of biotechnology due to its broad specificity and high redox potential. Any successful application of the enzyme requires large scale production. As laccase production is highly dependent on medium components and cultural conditions, optimization of the same is essential for efficient product production.

RESULTS

Production of laccase by fungal strain Marasmiellus palmivorus LA1 under solid state fermentation was optimized by the Taguchi design of experiments (DOE) methodology. An orthogonal array (L8) was designed using Qualitek-4 software to study the interactions and relative influence of the seven selected factors by one factor at a time approach. The optimum condition formulated was temperature (28 °C), pH (5), galactose (0.8%w/v), cupric sulphate (3 mM), inoculum concentration (number of mycelial agar pieces) (6Nos.) and substrate length (0.05 m). Overall yield increase of 17.6 fold was obtained after optimization. Statistical optimization leads to the elimination of an insignificant medium component ammonium dihydrogen phosphate from the process and contributes to a 1.06 fold increase in enzyme production. A final production of 667.4 ± 13 IU/mL laccase activity paves way for the application of this strain for industrial applications.

CONCLUSION

Study optimized lignin degrading laccases from Marasmiellus palmivorus LA1. This laccases can thus be used for further applications in different scales of production after analyzing the properties of the enzyme. Study also confirmed the use of taguchi method for optimizations of product production.

Genome-Wide Identification of Sorghum bicolor Laccases Reveals Potential Targets for Lignin Modification

Laccase is a key enzyme in plant lignin biosynthesis as it catalyzes the final step of monolignols polymerization. Sweet sorghum [Sorghum bicolor (L.) Moench] is considered as an ideal feedstock for ethanol production, but lignin greatly limits the production efficiency. No comprehensive analysis on laccase has ever been conducted in S. bicolor, although it appears as the most promising target for engineering lignocellulosic feedstock. The aim of our work is to systematically characterize S. bicolor laccase gene family and to identify the lignin-specific candidates. A total of twenty-seven laccase candidates (SbLAC1-SbLAC27) were identified in S. bicolor. All SbLACs comprised the equivalent L1-L4 signature sequences and three typical Cu-oxidase domains, but exhibited diverse intron-exon patterns and relatively low sequence identity. They were divided into six groups by phylogenetic clustering, revealing potential distinct functions, while SbLAC5 was considered as the closest lignin-specific candidate. qRT-PCR analysis deciphered that SbLAC genes were expressed preferentially in roots and young internodes of sweet sorghum, and SbLAC5 showed high expression, adding the evidence that SbLAC5 was bona fide involved in lignin biosynthesis. Besides, high abundance of SbLAC6 transcripts was detected, correlating it a potential role in lignin biosynthesis. Diverse cis regulatory elements were recognized in SbLACs promoters, indicating putative interaction with transcription factors. Seven SbLACs were found to be potential targets of sbi-miRNAs. Moreover, putative phosphorylation sites in SbLAC sequences were identified. Our research adds to the knowledge for lignin profile modification in sweet sorghum.

Knockdown of a laccase in Populus deltoides confers altered cell wall chemistry and increased sugar release

Plant laccases are thought to function in the oxidation of monolignols which leads to higher order lignin formation. Only a hand-full of laccases in plants have been functionally evaluated, and as such little is known about the breadth of their impact on cell wall chemistry or structure. Here, we describe a previously uncharacterized laccase from Populus, encoded by locus Potri.008G064000, whose reduced expression resulted in transgenic Populus trees with changes in syringyl/guaiacyl ratios as well as altered sugar release phenotypes. These phenotypes are consistent with plant biomass exhibiting reduced recalcitrance. Interestingly, the transgene effect on recalcitrance is dependent on a mild pretreatment prior to chemical extraction of sugars. Metabolite profiling suggests the transgene modulates phenolics that are associated with the cell wall structure. We propose that this particular laccase has a range of functions related to oxidation of phenolics and conjugation of flavonoids that interact with lignin in the cell wall.

In situ detection of laccase activity and immunolocalisation of a compression-wood-specific laccase (CoLac1) in differentiating xylem of Chamaecyparis obtusa

The secondary cell wall of compression wood tracheids has a highly lignified region (S2L) in its outermost portion. To better understand the mechanism of S2L formation, we focussed on the activity of laccase (a monolignol oxidase) and performed in situ studies of this enzyme in differentiating compression wood. Staining of differentiating compression wood demonstrated that laccase activity began in all cell wall layers before the onset of lignification. We detected no activity of peroxidase (another monolignol oxidase) in any cell wall layer. Thus, laccase likely plays the major role in monolignol oxidisation during compression wood differentiation. Laccase activity was higher in the S2L region than in other secondary wall regions, suggesting that this enzyme was responsible for the high lignin concentration in this region of the cell wall. Immunolabelling demonstrated the expression of a compression-wood-specific laccase (CoLac1) immediately following the onset of secondary wall thickening, this enzyme was localised to the S2L region, whereas much less abundant in the S1 layer or inner S2 layer. Thus, the CoLac1 protein is most likely localised to the outer part of S2 and responsible for the high lignin concentration in the S2L region.

Biochemical Characteristics of Three Laccase Isoforms from the Basidiomycete Pleurotus nebrodensis

The characterization of three laccase isoforms from Pleurotus nebrodensis is described. Isoenzymes Lac1, Lac2 and Lac3 were purified to homogeneity using ion exchange chromatography on DEAE-cellulose, CM-cellulose and Q-Sepharose and a gel filtration step on Superdex 75. The molecular weights of the purified laccases were estimated to be 68, 64 and 51 kDa, respectively. The isoenzymes demonstrated the same optimum pH at 3.0 but slightly different temperature optima: 50–60 °C for Lac1 and Lac3 and 60 °C for Lac2. Lac2 was always more stable than the other two isoforms and exposure to 50 °C for 120 min caused 30% loss in activity. Lac2 was relatively less stable than the other two isoforms when exposed to the pH range of 3.0–8.0 for 24 h, but inactivation only occurred initially, with around 70% residual activity being maintained during the whole process. Oxidative ability towards aromatic compounds varied substantially among the isoforms and each of them displayed preference toward some substrates. Kinetic constants (K_m, K_cat) were determined by using a 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS) assay, with Lac3 showing the best affinity and Lac2 displaying the highest catalytic efficiency. Amino acid sequences from peptides derived from digestion of isoenzymes showed great consistency with laccases in the databases.

Lignin engineering through laccase modification: a promising field for energy plant improvement

Laccase (p-diphenol:dioxygen oxidoreductase, EC 1.10.3.2) is a member of the multicopper oxidases and catalyzes the one-electron oxidation of a wide range of substrates, coupled with the reduction of oxygen to water. It is widely distributed in bacteria, fungi, plants and insects. Laccases are encoded by multigene family, and have been characterized mostly from fungi till now, with abundant industrial applications in pulp and paper, textile, food industries, organic synthesis, bioremediation and nanobiotechnology, while limited researches have been performed in plants, and no application has been reported. Plant laccases share the common molecular architecture and reaction mechanism with fungal ones, despite of difference in redox potential and pH optima. Plant laccases are implicated in lignin biosynthesis since genetic evidence was derived from the Arabidopsis LAC4 and LAC17. Manipulation of plant laccases has been considered as a promising and innovative strategy in plant biomass engineering for desirable lignin content and/or composition, since lignin is the major recalcitrant component to saccharification in biofuel production from lignocellulose, and therefore directly limits the fermentation yields. Moreover, plant laccases have been reported to be involved in wound healing, maintenance of cell wall structure and integrity, and plant responses to environmental stresses. Here, we summarize the properties and functions of plant laccase, and discuss the potential of biotechnological application, thus providing a new insight into plant laccase, an old enzyme with a promising beginning in lignocellulose biofuel production.

The cell biology of lignification in higher plants

BACKGROUND

Lignin is a polyphenolic polymer that strengthens and waterproofs the cell wall of specialized plant cell types. Lignification is part of the normal differentiation programme and functioning of specific cell types, but can also be triggered as a response to various biotic and abiotic stresses in cells that would not otherwise be lignifying.

SCOPE

Cell wall lignification exhibits specific characteristics depending on the cell type being considered. These characteristics include the timing of lignification during cell differentiation, the palette of associated enzymes and substrates, the sub-cellular deposition sites, the monomeric composition and the cellular autonomy for lignin monomer production. This review provides an overview of the current understanding of lignin biosynthesis and polymerization at the cell biology level.

CONCLUSIONS

The lignification process ranges from full autonomy to complete co-operation depending on the cell type. The different roles of lignin for the function of each specific plant cell type are clearly illustrated by the multiple phenotypic defects exhibited by knock-out mutants in lignin synthesis, which may explain why no general mechanism for lignification has yet been defined. The range of phenotypic effects observed include altered xylem sap transport, loss of mechanical support, reduced seed protection and dispersion, and/or increased pest and disease susceptibility.

Norway spruce (Picea abies) laccases: characterization of a laccase in a lignin-forming tissue culture

Secondarily thickened cell walls of water-conducting vessels and tracheids and support-giving sclerenchyma cells contain lignin that makes the cell walls water impermeable and strong. To what extent laccases and peroxidases contribute to lignin biosynthesis in muro is under active evaluation. We performed an in silico study of Norway spruce (Picea abies (L.) Karst.) laccases utilizing available genomic data. As many as 292 laccase encoding sequences (genes, gene fragments, and pseudogenes) were detected in the spruce genome. Out of the 112 genes annotated as laccases, 79 are expressed at some level. We isolated five full-length laccase cDNAs from developing xylem and an extracellular lignin-forming cell culture of spruce. In addition, we purified and biochemically characterized one culture medium laccase from the lignin-forming cell culture. This laccase has an acidic pH optimum (pH 3.8-4.2) for coniferyl alcohol oxidation. It has a high affinity to coniferyl alcohol with an apparent Km value of 3.5 μM; however, the laccase has a lower catalytic efficiency (V(max)/K(m)) for coniferyl alcohol oxidation compared with some purified culture medium peroxidases. The properties are discussed in the context of the information already known about laccases/coniferyl alcohol oxidases of coniferous plants.

Differential expression of miRNAs and their target genes in senescing leaves and siliques: insights from deep sequencing of small RNAs and cleaved target RNAs

MicroRNAs (miRNAs) are a class of small RNAs, which typically function by guiding cleavage of target mRNAs. They are known to play roles in a variety of plant processes including development, responses to environmental stresses and senescence. To identify senescence regulation of miRNAs in Arabidopsis thaliana, eight small RNA libraries were constructed and sequenced at four different stages of development and senescence from both leaves and siliques, resulting in more than 200 million genome-matched sequences. Parallel analysis of RNA ends libraries, which enable the large-scale examination of miRNA-guided cleavage products, were constructed and sequenced, resulting in over 750 million genome-matched sequences. These large datasets led to the identification a new senescence-inducible small RNA locus, as well as new regulation of known miRNAs and their target genes during senescence, many of which have established roles in nutrient responsiveness and cell structural integrity. In keeping with remobilization of nutrients thought to occur during senescence, many miRNAs and targets had opposite expression pattern changes between leaf and silique tissues during the progression of senescence. Taken together, these findings highlight the integral role that miRNAs may play in the remobilization of resources and alteration of cellular structure that is known to occur in senescence.

Identification of miRNAs involved in pear fruit development and quality

Background

MicroRNAs (miRNAs) are a class of small, endogenous RNAs that take part in regulating genes through mediating gene expressions at the post-transcriptional level in plants. Previous studies have reported miRNA identification in various plants ranging from model plants to perennial fruit trees. However, the role of miRNAs in pear (Pyrus bretschneideri) fruit development is not clear. Here, we investigated the miRNA profiles of pear fruits from different time stages during development with Illumina HiSeq 2000 platform and bioinformatics analysis. Quantitative real-time PCR was used to validate the expression levels of miRNAs.

Results

Both conserved and species-specific miRNAs in pear have been identified in this study. Total reads, ranging from 19,030,925 to 25,576,773, were obtained from six small RNA libraries constructed for different stages of fruit development after flowering. Comparative profiling showed that an average of 90 miRNAs was expressed with significant differences between various developmental stages. KEGG pathway analysis on 2,216 target genes of 188 known miRNAs and 1,127 target genes of 184 novel miRNAs showed that miRNAs are widely involved in the regulation of fruit development. Among these, a total of eleven miRNAs putatively participate in the pathway of lignin biosynthesis, nine miRNAs were identified to take part in sugar and acid metabolism, and MiR160 was identified to regulate auxin response factor.

Conclusion

Comparative analysis of miRNAomes during pear fruit development is presented, and miRNAs were proved to be widely involved in the regulation of fruit development and formation of fruit quality, for example through lignin synthesis, sugar and acid metabolism, and hormone signaling. Combined with computational analysis and experimental confirmation, the research contributes valuable information for further functional research of microRNA in fruit development for pear and other species.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2164-15-953) contains supplementary material, which is available to authorized users.

Fungal laccases and their applications in bioremediation

Laccases are blue multicopper oxidases, which catalyze the monoelectronic oxidation of a broad spectrum of substrates, for example, ortho- and para-diphenols, polyphenols, aminophenols, and aromatic or aliphatic amines, coupled with a full, four-electron reduction of O₂ to H₂O. Hence, they are capable of degrading lignin and are present abundantly in many white-rot fungi. Laccases decolorize and detoxify the industrial effluents and help in wastewater treatment. They act on both phenolic and nonphenolic lignin-related compounds as well as highly recalcitrant environmental pollutants, and they can be effectively used in paper and pulp industries, textile industries, xenobiotic degradation, and bioremediation and act as biosensors. Recently, laccase has been applied to nanobiotechnology, which is an increasing research field, and catalyzes electron transfer reactions without additional cofactors. Several techniques have been developed for the immobilization of biomolecule such as micropatterning, self-assembled monolayer, and layer-by-layer techniques, which immobilize laccase and preserve their enzymatic activity. In this review, we describe the fungal source of laccases and their application in environment protection.

Wood chemistry analysis and expression profiling of a poplar clone expressing a tyrosine-rich peptide

Our study has identified pathways and gene candidates that may be associated with the greater flexibility and digestibility of the poplar cell walls. With the goal of facilitating lignin removal during the utilization of woody biomass as a biofuel feedstock, we previously transformed a hybrid poplar clone with a partial cDNA sequence encoding a tyrosine- and hydroxyproline-rich glycoprotein from parsley. A number of the transgenic lines released more polysaccharides following protease digestion and were more flexible than wild-type plants, but otherwise normal in phenotype. Here, we report that overexpression of the tyrosine-rich peptide encoding sequence in these transgenic poplar plants did not significantly alter total lignin quantity or quality (S/G lignin ratio), five- and six-carbon sugar contents, growth rate, or susceptibility to a major poplar fungal pathogen, Septoria musiva. Whole-genome microarray analysis revealed a total of 411 differentially expressed transcripts in transgenic lines, all with decreased transcript abundance relative to wild-type plants. Their corresponding genes were overrepresented in functional categories such as secondary metabolism, amino acid metabolism, and energy metabolism. Transcript abundance was decreased primarily for five types of genes encoding proteins involved in cell-wall organization and in lignin biosynthesis. The expression of a subset of 19 of the differentially regulated genes by qRT-PCR validated the microarray results. Our study has identified pathways and gene candidates that may be the underlying cause for the enhanced flexibility and digestibility of the stems of poplar plants expressing the TYR transgene.

Ptr-miR397a is a negative regulator of laccase genes affecting lignin content in Populus trichocarpa

Laccases, as early as 1959, were proposed to catalyze the oxidative polymerization of monolignols. Genetic evidence in support of this hypothesis has been elusive due to functional redundancy of laccase genes. An Arabidopsis double mutant demonstrated the involvement of laccases in lignin biosynthesis. We previously identified a subset of laccase genes to be targets of a microRNA (miRNA) ptr-miR397a in Populus trichocarpa. To elucidate the roles of ptr-miR397a and its targets, we characterized the laccase gene family and identified 49 laccase gene models, of which 29 were predicted to be targets of ptr-miR397a. We overexpressed Ptr-MIR397a in transgenic P. trichocarpa. In each of all nine transgenic lines tested, 17 PtrLACs were down-regulated as analyzed by RNA-seq. Transgenic lines with severe reduction in the expression of these laccase genes resulted in an ∼40% decrease in the total laccase activity. Overexpression of Ptr-MIR397a in these transgenic lines also reduced lignin content, whereas levels of all monolignol biosynthetic gene transcripts remained unchanged. A hierarchical genetic regulatory network (GRN) built by a bottom-up graphic Gaussian model algorithm provides additional support for a role of ptr-miR397a as a negative regulator of laccases for lignin biosynthesis. Full transcriptome-based differential gene expression in the overexpressed transgenics and protein domain analyses implicate previously unidentified transcription factors and their targets in an extended hierarchical GRN including ptr-miR397a and laccases that coregulate lignin biosynthesis in wood formation. Ptr-miR397a, laccases, and other regulatory components of this network may provide additional strategies for genetic manipulation of lignin content.