Ions in hyaluronic acid solutions

Extraction and Purification of Biopolymers from Marine Origin Sources Envisaging Their Use for Biotechnological Applications

Biopolymers are a versatile and diverse class of materials that has won high interest due to their potential application in several sectors of the economy, such as cosmetics, medical materials/devices, and food additives. In the last years, the search for these compounds has explored a wider range of marine organisms that have proven to be a great alternative to mammal sources for these applications and benefit from their biological properties, such as low antigenicity, biocompatibility, and biodegradability, among others. Furthermore, to ensure the sustainable exploitation of natural marine resources and address the challenges of 3R's policies, there is a current necessity to valorize the residues and by-products obtained from food processing to benefit both economic and environmental interests. Many extraction methodologies have received significant attention for the obtention of diverse polysaccharides, proteins, and glycosaminoglycans to accomplish the increasing demands for these products. The present review gives emphasis to the ones that can be obtained from marine biological resources, as agar/agarose, alginate and sulfated polysaccharides from seaweeds, chitin/chitosan from crustaceans from crustaceans, collagen, and some glycosaminoglycans such as chondroitin sulfate and hyaluronic acids from fish. It is offered, in a summarized and easy-to-interpret arrangement, the most well-established extraction and purification methodologies used for obtaining the referred marine biopolymers, their chemical structure, as well as the characterization tools that are required to validate the extracted material and respective features. As supplementary material, a practical guide with the step-by-step isolation protocol, together with the various materials, reagents, and equipment, needed for each extraction is also delivered is also delivered. Finally, some remarks are made on the needs still observed, despite all the past efforts, to improve the current extraction and purification procedures to achieve more efficient and green methodologies with higher yields, less time-consuming, and decreased batch-to-batch variability.

Diffusion of nanoparticles in heterogeneous hydrogels as vitreous humour in vitro substitutes

Nanomedicine has the potential to increase the biostability of drugs to treat retinal diseases, improving their performance and decreasing the required number of intravitreal injections. However, accurate pharmacokinetic studies of these nanoparticle-drug conjugates, nanoparticle motion across the vitreous humour and interaction with the retinal cell layers still need to be investigated. Existing nanoparticle tracking techniques require fluorescent labels, which can impact cytotoxicity, nanoparticles' motion, protein interactions, and cell internalization. In this study, a real-time label-free tracking technology, for single nanoparticles in an optical microscope based on the optical phenomena of caustics, was used to characterise the diffusion of nanoparticles in agar-hyaluronic acid hydrogels, previously validated as vitreous humour substitutes for in vitro models. The results demonstrated that the diffusion of nanoparticles through these hydrogels was heterogeneous, and that nanoparticle size had an important role in nanoparticle distribution across and within in vitro vitreous substitutes. These findings suggest that nanoparticle diameter is a critical parameter for designing novel therapeutics for retinal diseases. Moreover, nanoparticle charge did not affect nanoparticle diffusion or distribution in these synthetic hydrogels. The use of caustics in optical microscopy has been demonstrated to be a reproducible, inexpensive technique for screening novel therapeutics in eye in vitro models.

Development of novel iron(III) crosslinked bioinks comprising carboxymethyl cellulose, xanthan gum, and hyaluronic acid for soft tissue engineering applications

The advent of three-dimensional (3D) bioprinting offers a feasible approach to construct complex structures for soft tissue regeneration. Carboxymethyl cellulose (CMC) has been emerging as a very promising biomaterial for 3D bioprinting. However, due to the inability to maintain the post-printed stability, CMC needs to be physically blended and/or chemically crosslinked with other polymers. In this context, this study presents the combination of CMC with xanthan gum (XG) and hyaluronic acid (HA) to formulate a multicomponent bioink, leveraging the printability of CMC and XG, as well as the cellular support properties of HA. The ionic crosslinking of printed constructs with iron(III) via the metal-ion coordination between ferric cations and carboxylate groups of the three polymers was introduced to induce improved mechanical strength and long-term stability. Moreover, immortalized human epidermal keratinocytes (HaCaT) and human foreskin fibroblasts (HFF) encapsulated within iron-crosslinked printed hydrogels exhibited excellent cell viability (more than 95%) and preserved morphology. Overall, the presented study highlights that the combination of these three biopolymers and the ionic crosslinking with ferric ions is a valuable strategy to be considered for the development of new and advanced hydrogel-based bioinks for soft tissue engineering applications.

Organization of hyaluronic acid molecules in solutions

The organization of hyaluronic acid (HA) solutions was investigated by small angle neutron scattering (SANS). It was demonstrated that HA formed clusters greater than several hundred nanometers. The SANS response revealed a weak correlation peak, corresponding to ordering over a distance scale of about 80 nm. At higher wave vectors, the SANS response indicated the presence of rod-like structures. Addition of calcium ions only weakly affects the structure of the HA solution, but significantly reduces its osmotic pressure. The osmotic component of the SANS response is in good agreement with the intensity obtained from direct osmotic pressure measurements. The results are consistent with the rigid structure of the HA molecule.

Graphical abstract

Biocompatible topical delivery system of high-molecular-weight hyaluronan into human stratum corneum using magnesium chloride

Non-invasive delivery of hyaluronan into the stratum corneum (SC) is extremely difficult because of its high molecular weight and the strong barrier of the SC. We developed a safe method of administering hyaluronan into the human SC and determined its penetration route. The amount of hyaluronan that penetrated into the SC was 1.5-3 times higher in the presence of magnesium chloride hexahydrate (MgCl₂) than other metal chlorides. The root-mean-square radius of hyaluronan in water decreased with the addition of MgCl₂. Moreover, MgCl₂ solutions maintained their dissolved state on a plastic plate for a long time, suggesting that size compaction and inhibition of hyaluronan precipitation on the skin enhanced hyaluronan into the SC. Our results also strongly suggest that an intercellular route contributes to the penetration of hyaluronan from the upper to the middle layer of the SC. No disruption to the SC barrier was observed after continuous use once a day for 1 month, demonstrating the potential of our method for the safe, topical application of hyaluronan.

The detection of the captured circulating tumor cells on the core-shell nanofibrous membrane using hyaluronic acid-functionalized graphene quantum dots

In recent years, cancerous cases have increased remarkably worldwide, and metastasis is the leading cause of death. Therefore, research on the early detection of cancer and metastasis has expanded to aid successful cancer treatment. Here in this paper, at the first step, an electrospun nanofibrous membrane (NFM) with a core-shell structure was fabricated from PCL and HA to achieve cancer cell capturing (about 75% of cells). On the other hand, hyaluronic acid (HA)-functionalized graphene quantum dots (GQDs) were used to detect captured cancer cells on NFM through the changes in photoluminescence intensity. Therefore, CD44 receptor-HA interaction is the main principle used for both entrapment and detection of cancer cells. Results demonstrated the GQD-HA fluorescent intensity of solution decreased through the increase of the captured cancer cell numbers on NFM, which is related to the more adsorption of GQD nanocomposites to the CD44 receptors. In contrast, this intensity for noncancerous cells was steady with any cell concentrations. This difference shows the system's remarkable selectivity and specificity, which can be crucial in fluorescent imaging for accurate cancer diagnosis.

Design of a Tumor Binding GMCSF as Intratumoral Immunotherapy of Solid Tumors

Next-generation cancer immunotherapies may utilize immunostimulants to selectively activate the host immune system against tumor cells. Checkpoint inhibitors (CPIs) like anti-PD1/PDL-1 that inhibit immunosuppression have shown unprecedented success but are only effective in the 20-30% of patients that possess an already "hot" (immunogenic) tumor. In this regard, intratumoral (IT) injection of immunostimulants is a promising approach since they can work synergistically with CPIs to overcome the resistance to immunotherapies by inducing immune stimulation in the tumor. One such immunostimulant is granulocyte macrophage-colony-stimulating factor (GMCSF) that functions by recruiting and activating antigen-presenting cells (dendritic cells) in the tumor, thereby initiating anti-tumor immune responses. However, key problems with GMCSF are lack of efficacy and the risk of systemic toxicity caused by the leakage of GMCSF from the tumor tissue. We have designed tumor-retentive versions of GMCSF that are safe yet potent immunostimulants for the local treatment of solid tumors. The engineered GMCSFs (eGMCSF) were synthesized by recombinantly fusing tumor-ECM (extracellular matrix) binding peptides to GMCSF. The eGMCSFs exhibited enhanced tumor binding and potent immunological activity in vitro and in vivo. Upon IT administration, the tumor-retentive eGMCSFs persisted in the tumor, thereby alleviating systemic toxicity, and elicited localized immune activation to effectively turn an unresponsive immunologically "cold" tumor "hot".

The role of macrophage scavenger receptor 1 (MSR1) in inflammatory disorders and cancer

Macrophage scavenger receptor 1 (MSR1), also named CD204, holds key inflammatory roles in multiple pathophysiologic processes. Present primarily on the surface of various types of macrophage, this receptor variably affects processes such as atherosclerosis, innate and adaptive immunity, lung and liver disease, and more recently, cancer. As highlighted throughout this review, the role of MSR1 is often dichotomous, being either host protective or detrimental to the pathogenesis of disease. We will discuss the role of MSR1 in health and disease with a focus on the molecular mechanisms influencing MSR1 expression, how altered expression affects disease process and macrophage function, the limited cell signalling pathways discovered thus far, the emerging role of MSR1 in tumour associated macrophages as well as the therapeutic potential of targeting MSR1.

Molecular Dynamics Investigation of Hyaluronan in Biolubrication

Aqueous solution of strongly hydrophilic biopolymers is known to exhibit excellent lubrication properties in biological systems, such as the synovial fluid in human joints. Several mechanisms have been proposed on the biolubrication of joints, such as the boundary lubrication and the fluid exudation lubrication. In these models, mechanical properties of synovial fluid containing biopolymers are essential. To examine the role of such biopolymers in lubrication, a series of molecular dynamics simulations with an all-atom classical force field model were conducted for aqueous solutions of hyaluronan (hyaluronic acid, HA) under constant shear. After equilibrating the system, the Lees-Edwards boundary condition was imposed, with which a steady state of uniform shear flow was realized. Comparison of HA systems with hydrocarbon (pentadecane, PD) solutions of similar mass concentration indicates that the viscosity of HA solutions is slightly larger in general than that of PDs, due to the strong hydration of HA molecules. Effects of added electrolyte (NaCl) were also discussed in terms of hydration. These findings suggest the role of HA in biolubirication as a load-supporting component, with its flexible character and strong hydration structure.

Hyaluronic acid coated spinel ferrite for combination of chemo and photodynamic therapy: Green synthesis, characterization, and in vitro and in vivo biocompatibility study

In this project, different photosensitizers were prepared using different ratios of nickel, manganese, and iron. Then, multiple analysis were performed to evaluate their efficiency, and the most suitable one was used to be coated by hyaluronic acid to improve the nano-platform's biocompatibility and target ability. Moreover, another chemical targeting agent (riboflavin) was used to further improve the target ability of the prepared nano-platform. Different spectroscopies and thermal analysis were used to determine the physical and chemical characteristics of the prepared nano-platform. Also, in order to determine the biocompatibility of the nano-platform, in vitro and in vivo tests such as blood hemolysis, blood aggregation and lethal dose were performed. Then, an anti-cancer agent (curcumin) was loaded on the selected nano-platform to makes us able utilizing the synergistic effect of chemotherapy and photodynamic therapy simultaneously. Finally, the cell cytotoxicity results showed that the prepared nano-platform had a great anti-cancer potential which can make it a great candidate as a dual photo and chemo therapy agent for treatment of breast cancers.

Hydrogel composite mimics biological tissues

A novel composite hydrogel was developed that shows remarkable similarities to load bearing biological tissues. The composite gel consisting of a poly(vinyl alcohol (PVA) matrix filled with poly(acrylic acid) (PAA) microgel particles exhibits osmotic and mechanical properties that are qualitatively different from regular gels. In the PVA/PAA system the swollen PAA particles "inflate" the PVA network. The swelling of the PAA is limited by the tensile stress P_el developing in the PVA matrix. P_el increases with increasing swelling degree, which is opposite to the decrease of the elastic pressure observed in regular gels. The maximum tensile stress Pmaxel can be identified as a quantity that defines the load bearing ability of the composite gel. Systematic osmotic swelling pressure measurements have been made on PVA/PAA gels to determine the effects of PVA stiffness, PAA crosslink density, and Ca²⁺ ion concentration on Pmaxel. It is found that Pmaxel increases with the stiffness of the PVA matrix, and decreases with (i) increasing crosslink density of the PAA and (ii) increasing Ca²⁺ ion concentration. Small angle neutron scattering (SANS) measurements indicate only a weak interaction between the PVA and PAA gels. It is demonstrated that the osmotic swelling pressure of PVA/PAA composite gels reproduces the osmotic behavior of healthy and osteoarthritic cartilage.

Evidence of Many-Body Interactions in the Virial Coefficients of Polyelectrolyte Gels

Simulation studies of aqueous polymer solutions, and heuristic arguments by De Gennes for aqueous polyethylene oxide polymer solutions, have suggested that many-body interactions can give rise to the ‘anomalous’ situation in which the second osmotic virial coefficient is positive, while the third virial coefficient is negative. This phenomenon was later confirmed in analytic calculations of the phase behavior and the osmotic pressure of complex fluids exhibiting cooperative self-assembly into extended dynamic polymeric structures by Dudowicz et al. In the present study, we experimentally confirm the occurrence of this osmotic virial sign inversion phenomenon for several highly charged model polyelectrolyte gels (poly(acrylic acid), poly(styrene sulfonate), DNA, hyaluronic acid), where the virial coefficients are deduced from osmotic pressure measurements. Our observations qualitatively accord with experimental and simulation studies indicating that polyelectrolyte materials exhibit supramolecular assembly in solution, another symptomatic property of fluids exhibiting many-body interactions. We also find that the inversion in the variation of the second (A₂) and third (A₂) virial coefficients upon approach to phase separation does not occur in uncharged poly(vinyl acetate) gels. Finally, we briefly discuss the estimation of the osmotic compressibility of swollen polyelectrolyte gels from neutron scattering measurements as an alternative to direct, time-consuming and meticulous osmotic pressure measurements. We conclude by summarizing some general trends and suggesting future research directions of natural and synthetic polyelectrolyte hydrogels.

Investigating protein diffusivities in diluted hyaluronic acid solutions using dynamic light scattering

This study aimed to investigate the diffusivities of lysozyme (LYS), ovalbumin (OVA), and hyaluronic acid (HA) in buffered solvents using dynamic light scattering (DLS). For protein/solvent and HA/solvent binary systems, the diffusion coefficients of protein or HA were obtained from autocorrelation function (ACF) curve fitting. Whereas, for protein/HA/solvent ternary systems, the two eigenvalues of the mutual diffusion coefficient matrix were obtained from ACF curve fitting. The results of binary systems showed that at low ionic strength, the diffusion coefficients of protein and HA increased linearly with concentration; at high ionic strength, the diffusion coefficients of OVA and LYS were independent on protein concentration; for HA, the positive linear relationship between diffusion coefficient and concentration existed at high and low ionic strengths, but the slope at high ionic strength was smaller compared to that at low ionic strength. For OVA/HA/solvent ternary systems, the sum of two eigenvalues (D1DLS + D2DLS) was slightly smaller compared to (D_OVA + D_HA), where D_OVA and D_HA were the diffusion coefficients in their binary systems. On the contrary, for LYS/HA/solvent ternary systems, (D1DLS + D2DLS) were significantly smaller than (D_LYS + D_HA) and the diffusion coefficients in binary and ternary systems exhibited an opposite trend with respect to ionic strength change. The DLS and MD simulation results indicated strong attractive intermolecular interaction existed between LYS and HA molecules, especially at low ionic strength. By using DLS, it was possible to characterize the diffusion coefficients of diluted protein/HA binary and ternary systems.

The swelling behavior of the mouse cervix: Changing kinetics with osmolarity and the role of hyaluronan in pregnancy

The cervical remodeling process during pregnancy is characterized by progressive compositional and structural changes in the tissues extra-cellular matrix (ECM). Appropriately timed remodeling is critical for healthy gestation and prevention of premature cervical softening leading to preterm birth (PTB). Modification of the ECM glycosaminoglycans (GAGs) content with advancing pregnancy, especially the non-sulfated GAG hyaluronan (HA), is a fundamental change associated with cervical remodeling. While GAGs have numerous physiological roles, the mechanical consequence of evolving GAG content on cervical structure-function behavior remains an open question. Additionally, an understanding of cervical swelling properties, postulated to be regulated in part by GAGs, is required for the appropriate definition of a reference configuration for mechanical tests and to enhance biological understanding. To investigate cervical swelling, osmotic loading tests are conducted on isolated wild type mouse cervices throughout pregnancy. These tests are performed in various osmolarity solutions to assess the influence of the media on swelling kinetics. A genetically altered strain of mice with depletion of cervical HA is also tested to elucidate the contribution of HA to tissue swelling. Results show ex vivo cervical swelling is significant with volume changes ranging from 20 to 100% after 3h of free swelling. The swelling kinetics depend highly on osmolarity of the media and is altered with advancing pregnancy. The contribution of HA to swelling is only significant in hypo-osmotic solution when HA cervical content is high at the end of pregnancy. In summary, it is critical to account for swelling deformation mechanisms after excision in mechanical experiments. STATEMENT OF SIGNIFICANCE: The cervical extracellular matrix (ECM) undergoes drastic changes to fulfill the functional change of the cervix during pregnancy. Inappropriate timing for this transformation can result in preterm birth, a severe clinical challenge. One of the fundamental changes of the cervical ECM is the significant modification of the glycosaminoglycan content, especially hyaluronan (HA), which is thought to contribute significantly to the swelling and mechanical properties of the cervix. This study aims to measure the swelling kinetics of cervical tissue during pregnancy and to investigate the role of HA in these swelling tendencies. Results show the significant swelling of cervical tissue, which evolves as pregnancy progresses, highlighting a key material property feature of the remodeled cervix. Using a mouse strain with a cervical HA depletion, this work shows HA contributes to the swelling trends of late-term cervical tissue, in a hypo-osmotic solution.

CD44-targeted, indocyanine green-paclitaxel-loaded human serum albumin nanoparticles for potential image-guided drug delivery

The use of multifunctional nanomedicines for image-guided drug delivery is currently being universally evaluated as a means of efficiently managing cancers and other diseases. In this study we evaluated the potential of an indocyanine green (ICG) and paclitaxel (PTX) loaded human serum albumin (HSA) nanoparticles that was conjugated with hyaluronic acid for use in image-guided drug delivery targeted to CD44-positive non-small cell lung cancer (NSCLC). Series of NSCLC cell lines were evaluated for the expression of CD44 using both western blot analysis and qRT-PCR and compared to a normal lung fibroblast cell line (MRC-5). Using Fluorescence microscopy and photoacoustic imaging (PA), we explored the ability of these targeted nanoparticles to selectively accumulate in NSCLC cell lines in comparison to MRC-5 and their potential for biomedical imaging towards their use for theranostic application. Results obtained suggest that these targeted nanoparticles have potential for application in both imaging and treatment of NSCLC.

Comparative experimental and computational study of synthetic and natural bottlebrush polyelectrolyte solutions

We systematically investigate model synthetic and natural bottlebrush polyelectrolyte solutions through an array of experimental techniques (osmometry and neutron and dynamic light scattering) along with molecular dynamics simulations to characterize and contrast their structures over a wide range of spatial and time scales. In particular, we perform measurements on solutions of aggrecan and the synthetic bottlebrush polymer, poly(sodium acrylate), and simulations of solutions of highly coarse-grained charged bottlebrush molecules having different degrees of side-branch density and inclusion of an explicit solvent and ion hydration effects. While both systems exhibit a general tendency toward supramolecular organization in solution, bottlebrush poly(sodium acrylate) solutions exhibit a distinctive "polyelectrolyte peak" in their structure factor, but no such peak is observed in aggrecan solutions. This qualitative difference in scattering properties, and thus polyelectrolyte solution organization, is attributed to a concerted effect of the bottlebrush polymer topology and the solvation of the polymer backbone and counterions. The coupling of the polyelectrolyte topological structure with the counterion distribution about the charged polymer molecules along with direct polymer segmental hydration makes their solution organization and properties "tunable," a phenomenon that has significant ramifications for biological function and disease as well as for numerous materials applications.

Corrosion Behaviour and J774A.1 Macrophage Response to Hyaluronic Acid Functionalization of Electrochemically Reduced Graphene Oxide on Biomedical Grade CoCr

Improvements in the lubrication of metal–metal joint prostheses are of great clinical interest in order to minimize the particles released during wear–corrosion processes. In this work, electrochemically reduced graphene oxide (ErGO) on CoCr was functionalized with hyaluronic acid (ErGOHA). Functionalization was carried out by soaking for 24 h in phosphate buffer saline (PBS) solution containing 3 g/L hyaluronic acid (HA). The corrosion performance of CoCrErGO and CoCrErGOHA surfaces was studied by electrochemical impedance spectroscopy (EIS) for 7 days in PBS. Biocompatibility and cytotoxicity were studied in mouse macrophages J774A.1 cell line by the measurement of mitochondrial activity (WST-1 assay) and plasma membrane damage (LDH assay). The inflammatory response was examined through TNF-α and IL-10 cytokines in macrophages culture supernatants, used as indicators of pro-inflammatory and anti-inflammatory responses, respectively. EIS diagrams of CoCrErGOHA revealed two time constants: the first one, attributed to the hydration and diffusion processes of the HA layer adsorbed on ErGO, and the second one, the corrosion resistance of ErGOHA/CoCr interface. Macrophage assays showed better behavior on CoCrErGOHA than CoCr and CoCrErGO surfaces based on their biocompatible, cytotoxic, and inflammatory responses. Comparative analysis of IL-10 showed that functionalization with HA induces higher values of anti-inflammatory cytokine, suggesting an improvement in inflammatory behavior.

Fast nanoparticle rotational and translational diffusion in synovial fluid and hyaluronic acid solutions

Nanoparticles are under investigation as diagnostic and therapeutic agents for joint diseases, such as osteoarthritis. However, there is incomplete understanding of nanoparticle diffusion in synovial fluid, the fluid inside the joint, which consists of a mixture of the polyelectrolyte hyaluronic acid, proteins, and other components. Here, we show that rotational and translational diffusion of polymer-coated nanoparticles in quiescent synovial fluid and in hyaluronic acid solutions is well described by the Stokes-Einstein relationship, albeit with an effective medium viscosity that is much smaller than the macroscopic low shear viscosity of the fluid. This effective medium viscosity is well described by an equation for the viscosity of dilute polymer chains, where the additional viscous dissipation arises because of the presence of the polymer segments. These results shed light on the diffusive behavior of polymer-coated inorganic nanoparticles in complex and crowded biological environments, such as in the joint.

Computational and experimental approaches for chitosan-based nano PECs design: Insights on a deeper comprehension of nanostructure formation

Nanostructured polyelectrolyte complexes (nano PECs) based on biopolymers are an important technological strategy to target drugs to the action and/or absorption site in a more effective way. In this work, computational studies were performed to predict the ionization, spatial arrangement and interaction energies of chitosan (CS), hyaluronic acid (HA), and hypromellose phthalate (HP), for the design of nano PEC carriers for methotrexate (MTX). The optimal pH range (5.0-5.5) for preparing nano PECs was selected by experimental and computational methodologies, favoring the polymers interactions. CS, HA, HP and MTX addition order was also rationalized, maximizing their interactions and MTX entrapment. Spherical nano-sized particles (256-575 nm, by dynamic light scattering measurement) with positive surface charge (+25.5 to +29.2 mV) were successfully prepared. The MTX association efficiency ranged from 20 to 32 %. XRD analyses evidenced the formation of a new material with an organized structure, in relation to raw polymers.

Structure and phase behavior of poly(acrylic acid)-ferric ion complex aqueous solutions

In this study, we investigate the conformational evolution and phase behavior of poly(acrylic acid) (PAA) solution upon the introduction of ferric ions through a combination of small angle X-ray scattering (SAXS), turbidity, zeta-potential and pH measurements. Salt-free PAA aqueous solution is a weak polyelectrolyte solution. The introduced ferric ion can coordinate with the carboxylic acid groups, yielding H+ ions to lower the pH value. We find two transitions with increasing concentration of the ferric ions: a polyelectrolyte to apparent good solution transition characterized by the disappearance of the polyelectrolyte peak in the X-ray scattering, and a phase separation characterized by a sharp increase of the turbidity. Detailed analyses of pH and zeta-potential reveal the molecular details of the three regions. Namely, (1) the polyelectrolyte region locates at log[H+] (= -pH) ≫ log(3[Fe3+]), where the H+ ions are mainly contributed from the dissociation of carboxylic acid, and the polymer chains are negatively charged, (2) the good solution region locates at log[H+] ∼ log(3[Fe3+]), where the H+ ions are mainly yielded from coordination between COO- and Fe3+, and polymer chains are nearly neutralized, and (3) the phase separation locates at log[H+] ≪ log(3[Fe3+]), where the Fe3+ ions are not fully coordinated, and charge inversion occurs. The phase separation occurs when the chains are densely and tightly coordinated with Fe3+ ions.

Connecting the Stimuli-Responsive Rheology of Biopolymer Hydrogels to Underlying Hydrogen-Bonding Interactions

Many biopolymer hydrogels are environmentally responsive because they are held together by physical associations that depend on pH and temperature. Here, we investigate how the pH and temperature responses of the rheology of hyaluronan hydrogels are connected to the underlying molecular interactions. Hyaluronan is an essential structural biopolymer in the human body with many applications in biomedicine. Using two-dimensional infrared spectroscopy, we show that hyaluronan chains become connected by hydrogen bonds when the pH is changed from 7.0 to 2.5 and that the bond density at pH 2.5 is independent of temperature. Temperature-dependent rheology measurements show that because of this hydrogen bonding the stress relaxation at pH 2.5 is strongly slowed down in comparison to pH 7.0, consistent with the sticky reptation model of associative polymers. From the flow activation energy, we conclude that each polymer is cross-linked by multiple (5-15) hydrogen bonds to others, causing slow macroscopic stress relaxation, despite the short time scale of breaking and reformation of each individual hydrogen bond. Our findings can aid the design of stimuli-responsive hydrogels with tailored viscoelastic properties for biomedical applications.

Influence of the Molecular Weight and the Presence of Calcium Ions on the Molecular Interaction of Hyaluronan and DPPC

Hyaluronan is an essential physiological bio macromolecule with different functions. One prominent area is the synovial fluid which exhibits remarkable lubrication properties. However, the synovial fluid is a multi-component system where different macromolecules interact in a synergetic fashion. Within this study we focus on the interaction of hyaluronan and phospholipids, which are thought to play a key role for lubrication. We investigate how the interactions and the association structures formed by hyaluronan (HA) and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) are influenced by the molecular weight of the bio polymer and the ionic composition of the solution. We combine techniques allowing us to investigate the phase behavior of lipids (differential scanning calorimetry, zeta potential and electrophoretic mobility) with structural investigation (dynamic light scattering, small angle scattering) and theoretical simulations (molecular dynamics). The interaction of hyaluronan and phospholipids depends on the molecular weight, where hyaluronan with lower molecular weight has the strongest interaction. Furthermore, the interaction is increased by the presence of calcium ions. Our simulations show that calcium ions are located close to the carboxylate groups of HA and, by this, reduce the number of formed hydrogen bonds between HA and DPPC. The observed change in the DPPC phase behavior can be attributed to a local charge inversion by calcium ions binding to the carboxylate groups as the binding distribution of hyaluronan and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine is not changed.

Disappearance of the polyelectrolyte peak in salt-free solutions

We investigate the nature of the polyelectrolyte peak in salt-free solutions by molecular dynamics simulations using a minimal model of polyelectrolyte solutions that includes an explicit solvent and counterions and small angle scattering experiments. It is found that the polyelectrolyte peak progressively disappears as the strength of solvation for the charged species is increased and the scattering profiles start to resemble those of neutral polymer solutions. The disappearance of the polyelectrolyte peak coincides with the emergence of attractive interchain interactions over a wide range of length scales. These findings provide insights into the microscopic origin of the polyelectrolyte peak.

Martini Coarse-Grained Model of Hyaluronic Acid for the Structural Change of Its Gel in the Presence of Monovalent and Divalent Salts

Hyaluronic acid (HA) has a wide range of biomedical applications including the formation of hydrogels, microspheres, sponges, and films. The modeling of HA to understand its behavior and interaction with other biomolecules at the atomic level is of considerable interest. The atomistic representation of long HA polymers for the study of the macroscopic structural formation and its interactions with other polyelectrolytes is computationally demanding. To overcome this limitation, we developed a coarse grained (CG) model for HA adapting the Martini scheme. A very good agreement was observed between the CG model and all-atom simulations for both local (bonded interactions) and global properties (end-to-end distance, a radius of gyration, RMSD). Our CG model successfully demonstrated the formation of HA gel and its structural changes at high salt concentrations. We found that the main role of CaCl₂ is screening the electrostatic repulsion between chains. HA gel did not collapse even at high CaCl₂ concentrations, and the osmotic pressure decreased, which agrees well with the experimental results. This is a distinct property of HA from other proteins or polynucleic acids which ensures the validity of our CG model. Our HA CG model is compatible with other CG biomolecular models developed under the Martini scheme, which allows for large-scale simulations of various HA-based complex systems.

Jones R, Lou J, Xia Y. Systematic investigation of synthetic polyelectrolyte bottlebrush solutions by neutron and dynamic light scattering, osmometry, and molecular dynamics simulation

There is a great interest in the synthesis and characterization of polyelectrolytes that mimic naturally occurring bottlebrush polyelectrolytes to capitalize on the unique properties of this class of macromolecules. Charged bottlebrush polymers form the protective mucus layer in the lungs, stomach, and orifices of animals and provide osmotic stabilization and lubrication to joints. In the present work, we systematically investigate bottlebrush poly(sodium acrylates) through a combination of measurements of solution properties (osmometry, small-angle neutron scattering, and dynamic light scattering) and molecular dynamics simulations, where the bottlebrush properties are compared in each case to their linear polymer counterparts. These complementary experimental and computational methods probe vastly different length- and timescales, allowing for a comprehensive characterization of the supermolecular structure and dynamics of synthetic polyelectrolyte bottlebrush molecules in solution.

Etoricoxib-loaded bio-adhesive hybridized polylactic acid-based nanoparticles as an intra-articular injection for the treatment of osteoarthritis

Osteoarthritis is a major problem in elder people. Etoricoxib-loaded bio-adhesive hybridized nanoparticles were prepared using polylactic acid (PLA) and chitosan hydrochloride (CS-HCl) in presence of Captex®200 as a liquid oil, polyvinyl alcohol (PVA) and Tween®80 as surfactants. The study aimed to present a new intra-articular treatment of osteoarthritis with anti-inflammatory as well as bone rebuilding effects. Hybridized nanoparticles were fabricated applying the emulsion solvent evaporation technique then assessed for particle size, zeta potential, entrapment efficiency and in-vitro drug release. Furthermore, FT-IR and DSC in addition to morphological examination were done. Results revealed that the formulation composed of PLA:Captex®200 in ratio 1:2 (w/w), 1%w/v Tween®80, 0.3% w/v CS-HCl and 3%w/v PVA possessed the smallest particle size and the most sustained drug release, thus was sorted for further analyses. The selected formulation ability to interact with the negatively charged sodium fluroscein was evaluated to predict its binding with the naturally occurring hyaluronic acid in the knee joint where promising results were obtained. Results showed the cytocompatibility of the formulation when tested using MC3T3-E1 normal bone cell line, enhanced ALP activity and increased calcium ion deposition and binding. Results suggested that the presented formulation can be considered as an innovative approach for osteoarthritis.

Ultrasonically and Iontophoretically Enhanced Drug-Delivery System Based on Dissolving Microneedle Patches

A multifunctional system comprised of hyaluronic acid microneedles was developed as an effective transdermal delivery platform for rapid local delivery. The microneedles can regulate the filling amount on the tip, by controlling the concentration of hyaluronic acid solution. Ultrasonication induces dissolution of the HA microneedles via vibration of acoustic pressure, and AC iontophoresis improves the electrostatic force-driven diffusion of HA ions and rhodamine B. The effect of ultrasound on rhodamine release was analyzed in vitro using a gelatin hydrogel. The frequency and voltage dependence of the AC on the ion induction transfer was also evaluated experimentally. The results showed that the permeability of the material acts as a key material property. The delivery system based on ultrasonication and iontophoresis in microneedles increases permeation, thus resulting in shorter initial delivery time than that required by delivery systems based on passive or ultrasonication alone. This study highlights the significance of the combination between ultrasonic waves and iontophoresis for improving the efficiency of the microneedles, by shortening the reaction duration. We anticipate that this system can be extended to macromolecular and dependence delivery, based on drug response time.

Nanoscale insight into the degradation mechanisms of the cartilage articulating surface preceding OA

Osteoarthritis (OA) is a degenerative disease and leading cause of disability globally. We report the a fundamental study of the mechanisms underlying deterioration of hydrated cartilage in the presence of elevated calcium content preceding OA.

Effect of calcium ions and pH on the morphology and mechanical properties of hyaluronan brushes

Hyaluronan (HA) is a linear, regular polysaccharide that plays as a chief structural and functional component in peri- and extracellular matrices, thus contributing significantly to many basic cellular processes. To understand more comprehensively the response of the supramolecular organization of HA polymers to changes in their aqueous environment, we study the effects of Ca2+ concentration and pH on the morphology and rigidity of films of end-grafted HA polymers on planar supports (HA brushes), as a well-defined in vitro model system of HA-rich matrices, by reflection interference contrast microscopy and quartz crystal microbalance. The thickness and softness of HA brushes decrease significantly with Ca2+ concentration but do not change with pH, within the physiological ranges of these parameters. The effect of Ca2+ on HA brush thickness is virtually identical to the effect of Na+ at 10-fold higher concentrations. Moreover, the thickness and softness of HA brushes decrease appreciably upon HA protonation at pH less than 6. Effects of pH and calcium ions are fully reversible over large parameter ranges. These findings are relevant for understanding the supramolecular organization and dynamics of HA-rich matrices in biological systems and will also benefit the rational design of synthetic HA-rich materials with tailored properties.

Ionic effects in semi-dilute biopolymer solutions: A small angle scattering study

Systematic investigations using neutron and X-ray small angle scattering in near-physiological salt solutions were made to reveal the effect of polymer concentration, pH, and calcium ion concentration on the structure of semi-dilute solutions of four model biopolymers [polyaspartic acid, DNA, chondroitin sulfate, and hyaluronic acid (HA)] representing typical backbone structures. In the low q range (<0.01 Å-1), the scattering response I(q) is dominated by scattering from large clusters. In the intermediate q range, I(q) varies approximately as q -1, exposing the linear nature of the scatterers. In these polyelectrolyte solutions, the correlation length L displays a power law dependence on the polymer concentration c that resembles that of neutral polymer solutions. L increases with increasing calcium chloride concentration and with decreasing pH. The effect of the different divalent cations, Ba, Mg, Ca, Sr, and Mn, on the structure of DNA solutions is practically identical. However, in mixed salt conditions at the same ionic strength, the combined effect of mono- and divalent counter-ions on the structure of the polymer solutions deviates significantly from additivity. Anomalous small angle X-ray scattering observations on both DNA and HA solutions reveal that the divalent strontium counter-ions form a tight sheath around the polymer chain. The shape of the divalent ion cloud is similar in these two systems.

Electrodiffusion-Mediated Swelling of a Two-Phase Gel Model of Gastric Mucus

Gastric mucus gel is known to exhibit dramatic and unique swelling behaviors in response to the ionic composition of the hydrating solution. This swelling behavior is important in the maintenance of the mucus layer lining the stomach wall, as the layer is constantly digested by enzymes in the lumen, and must be replenished by new mucus that swells as it is secreted from the gastric wall. One hypothesis suggests that the condensed state of mucus at secretion is maintained by transient bonds with calcium that form crosslinks. These crosslinks are lost as monovalent cations from the environment displace divalent crosslinkers, leading to a dramatic change in the energy of the gel and inducing the swelling behavior. Previous modeling work has characterized the equilibrium behavior of polyelectrolyte gels that respond to calcium crosslinking. Here, we present an investigation of the dynamic swelling behavior of a polyelectrolytic gel model of mucus. In particular, we quantified the rate at which a globule of initially crosslinked gel swells when exposed to an ionic bath. The dependence of this swelling rate on several parameters was characterized. We observed that swelling rate has a non-monotone dependence on the molarity of the bath solution, with moderate concentrations of available sodium inducing the fastest swelling.

Osmolality predictive models of different polymers as tools in parenteral and ophthalmic formulation development

During the development of parenteral dosage forms, different physicochemical studies are required to ensure stable, effective and safe formulations. The osmolality of this kind of dosage forms should bear a close similarity to the body fluids to prevent local irritation, pain or even more significant side effects like endothelial damage. The osmotic studies performed in Polyethylene glycol 400 (PEG 400), Polyethylene glycol 4000 (PEG 4000), Poloxamer 407 (P407), Sodium Hyaluronate (SH), Chondroitin Sulphate Sodium (CS), Cremophor RH 40 (CRE40) and Polyvinyl alcohol (PVA) aqueous solutions, showed that the theoretical determination of the osmolality based on their molecular weight as the only determinant factor did not agree with the values obtained by the measurement of colligative properties such as the freezing point depression. The data obtained from this study and its analysis, provided predictive equations that can be used as tools in the primary development to estimate formulation's osmolality at different concentrations; and its evolution over a period at the hypothetical worst-case scenario of storage temperature.

Hyaluronan in adipogenesis, adipose tissue physiology and systemic metabolism

Hyaluronic acid (HA, also known as hyaluronan), is a non-sulfated linear glycosaminoglycan polymer consisting of repeating disaccharide units of d-glucuronic acid and N-acetyl-d-glucosamine abundantly present in the extracellular matrix. The sizes of hyaluronic acid polymers range from 5000 to 20,000,000 Da in vivo, and the functions of HA are largely dictated by its size. Due to its high biocompatibility, HA has been commonly used as soft tissue filler as well as a major component of biomaterial scaffolds in tissue engineering. Several studies have implicated that HA may promote differentiation of adipose tissue derived stem cells in vitro or in vivo when used as a supporting scaffold. However, whether HA actually promotes adipogenesis in vivo and the subsequent metabolic effects of this process are unclear. This review summarizes some recent publications in the field and discusses the possible directions and approaches for future studies, focusing on the role of HA in the adipose tissue.

Structure and Properties of Cartilage Proteoglycans

The most abundant cartilage proteoglycan is aggrecan, a bottlebrush shaped molecule that possesses over 100 glycosaminoglycan (chondroitin sulfate and keratan sulfate) chains. The side-chains are linear sulfated polysaccharides that are negatively charged under physiological conditions. Aggrecan interacts with hyaluronic acid (HA) to form large aggregates. Osmotic pressure measurements and rheological measurements are used to study the static and dynamic behavior of aggrecan assemblies at the macroscopic length scales. The microscopic properties of aggrecan solutions are determined by small angle neutron scattering (SANS), and static and dynamic light scattering (SLS and DLS). In dilute solutions aggrecan forms microgels with a diffuse boundary, composed of loosely connected clusters. The osmotic pressure of the aggrecan-HA system decreases with increasing HA content. DLS yields a relaxation rate that varies as q3, arising from internal modes in the microgel. The relaxation rate in the solutions of the aggrecan-HA complex is slightly greater than in the pure aggrecan solution.

Osmotic Properties of Cartilage

Understanding the interactions and organization of various molecular constituents of cartilage is an essential prerequisite to designing and developing effective nuclear magnetic resonance and magnetic resonance imaging (MRI) strategies to characterize the state of this tissue in normal and abnormal development, aging, health and disease, and trauma. In this chapter the osmotic properties of cartilage are discussed. An attempt is made to relate the tissue’s macroscopic behavior to its hierarchical organization and the physical–chemical interactions among its main macromolecular constituents. It is shown how to separate the osmotic contribution of the proteoglycan assemblies from that of the collagen network. The interactions between the main macromolecular components of cartilage extracellular matrix (ECM) are determined using an array of complementary experimental techniques (osmotic pressure measurements, small-angle X-ray scattering, small-angle neutron scattering, dynamic light scattering, and atomic force microscopy) probing the ECM structure and dynamics over a broad range of length and timescales. This knowledge is also important to construct magnetic resonance phantoms for quantitative MRI that exhibit osmotic, mechanical, and relaxation properties similar to that of cartilage. Such biomimetic phantoms with well-characterized physical and imaging properties are critically important to validate MRI characteristics.

Effect of calcium/sodium ion exchange on the osmotic properties and structure of polyelectrolyte gels

We discuss the main findings of a long-term research program exploring the consequences of sodium/calcium ion exchange on the macroscopic osmotic and elastic properties, and the microscopic structure of representative synthetic polyelectrolyte (sodium polyacrylate, (polyacrylic acid)) and biopolymer gels (DNA). A common feature of these gels is that above a threshold calcium ion concentration, they exhibit a reversible volume phase transition. At the macroscopic level, the concentration dependence of the osmotic pressure shows that calcium ions influence primarily the third-order interaction term in the Flory-Huggins model of polymer solutions. Mechanical tests reveal that the elastic modulus is practically unaffected by the presence of calcium ions, indicating that ion bridging does not create permanent cross-links. At the microscopic level, small-angle neutron scattering shows that polyacrylic acid and DNA gels exhibit qualitatively similar structural features in spite of important differences (e.g. chain flexibility and chemical composition) between the two polymers. The main effect of calcium ions is that the neutron scattering intensity increases due to the decrease in the osmotic modulus. At the level of the counterion cloud around dissolved macroions, anomalous small-angle X-ray scattering measurements made on DNA indicate that divalent ions form a cylindrical sheath enveloping the chain, but they are not localized. Small-angle neutron scattering and small-angle X-ray scattering provide complementary information on the structure and interactions in polymer solutions and gels.

Targeting cancer with hyaluronic acid-based nanocarriers: recent advances and translational perspectives

Hyaluronic acid is a natural polysaccharide that has been widely explored for the development of anticancer therapies due to its ability to target cancer cells. Moreover, advances made in the last decade have revealed the versatility of this biomaterial in the design of multifunctional carriers, intended for the delivery of a variety of bioactive molecules, including polynucleotides, immunomodulatory drugs and imaging agents. In this review, we aim to provide an overview of the major recent achievements in this field, highlighting the application of the newly developed nanostructures in combination therapies, immunomodulation and theranostics. Finally, we will discuss the main challenges and technological advances that will allow these carriers to be considered as candidates for clinical development.

Structure of DPPC-hyaluronan interfacial layers - effects of molecular weight and ion composition

Hyaluronan and phospholipids play an important role in lubrication in articular joints and provide in combination with glycoproteins exceptionally low friction coefficients. We have investigated the structural organization of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) Langmuir layers at the solution-air interface at different length scales with respect to the adsorption of hyaluronan (HA). This allows us to assemble a comprehensive picture of the adsorption and the resulting structures, and how they are affected by the molecular weight of HA and the presence of calcium ions. Brewster angle microscopy and grazing incident diffraction were used to determine the lateral structure at the micro- and macro scale. The data reveals an influence of HA on both the macro and micro structure of the DPPC Langmuir layer, and that the strength of this effect increases with decreasing molecular weight of HA and in presence of calcium ions. Furthermore, from X-ray reflectivity measurements we conclude that HA adsorbs to the hydrophilic part of DPPC, but data also suggest that two types of interfacial structures are formed at the interface. We argue that hydrophobic forces and electrostatic interactions play important rules for the association between DPPC and HA. Surface pressure area isotherms were used to determine the influence of HA on the phase behavior of DPPC while electrophoretic mobility measurements were used to gain insight into the binding of calcium ions to DPPC vesicles and hyaluronan.