In vitro models of molecular and nano-particle transport across the blood-brain barrier

A review on micro- and nanoplastics in humans: Implication for their translocation of barriers and potential health effects

As emerging contaminants, micro- and nanoplastics (MNPs) can absorb and leach various toxic chemicals and ultimately endanger the health of the ecological environment and humans. With extensive research on MNPs, knowledge about MNPs in humans, especially their translocation of barriers and potential health effects, is of utmost importance. In this review, we collected literature published from 2000 to 2023, focusing on MNPs on their occurrence in humans, penetrating characteristics in the placental, blood-brain, and blood-testis barriers, and exposure effects on mammalian health. The characteristics and distributions of MNPs in human samples were analyzed, and the results demonstrated that MNPs were ubiquitous in most human samples, except for kidneys and cerebrospinal fluid. In addition, the phenomenon of MNPs crossing barriers and their underlying mechanisms were discussed. We also summarized the potential factors that may affect the barrier crossing and health effects of MNPs, including characteristics of MNPs, exposure doses, administration routes, exposure durations, co-exposure to other pollutants, and genetic predisposition. Exposure to MNPs may cause cytotoxicity, neurotoxicity, and developmental and reproductive toxicity in mammals. People are encouraged to reduce their exposure to MNPs to prevent these adverse health effects. Finally, we discussed the shortcomings of current research on MNPs in humans, providing a valuable reference for understanding and evaluating the potential health risks from MNP exposure in mammals, including humans.

Evaluation of Drug Blood-Brain-Barrier Permeability Using a Microfluidic Chip

The blood-brain-barrier (BBB) is made up of blood vessels whose permeability enables the passage of some compounds. A predictive model of BBB permeability is important in the early stages of drug development. The predicted BBB permeabilities of drugs have been confirmed using a variety of in vitro methods to reduce the quantities of drug candidates needed in preclinical and clinical trials. Most prior studies have relied on animal or cell-culture models, which do not fully recapitulate the human BBB. The development of microfluidic models of human-derived BBB cells could address this issue. We analyzed a model for predicting BBB permeability using the Emulate BBB-on-a-chip machine. Ten compounds were evaluated, and their permeabilities were estimated. Our study demonstrated that the permeability trends of ten compounds in our microfluidic-based system resembled those observed in previous animal and cell-based experiments. Furthermore, we established a general correlation between the partition coefficient (Kp) and the apparent permeability (Papp). In conclusion, we introduced a new paradigm for predicting BBB permeability using microfluidic-based systems.

In Vitro Blood-Brain Barrier Models for Neuroinfectious Diseases: A Narrative Review

The blood-brain barrier (BBB) is a complex, dynamic, and adaptable barrier between the peripheral blood system and the central nervous system. While this barrier protects the brain and spinal cord from inflammation and infection, it prevents most drugs from reaching the brain tissue. With the expanding interest in the pathophysiology of BBB, the development of in vitro BBB models has dramatically evolved. However, due to the lack of a standard model, a range of experimental protocols, BBB-phenotype markers, and permeability flux markers was utilized to construct in vitro BBB models. Several neuroinfectious diseases are associated with BBB dysfunction. To conduct neuroinfectious disease research effectively, there stems a need to design representative in vitro human BBB models that mimic the BBB's functional and molecular properties. The highest necessity is for an in vitro standardised BBB model that accurately represents all the complexities of an intact brain barrier. Thus, this in-depth review aims to describe the optimization and validation parameters for building BBB models and to discuss previous research on neuroinfectious diseases that have utilized in vitro BBB models. The findings in this review may serve as a basis for more efficient optimisation, validation, and maintenance of a structurally- and functionally intact BBB model, particularly for future studies on neuroinfectious diseases.

Vascularized liver-on-a-chip model to investigate nicotine-induced dysfunction

The development of physiologically relevant in vitro systems for simulating disease onset and progression and predicting drug metabolism holds tremendous value in reducing drug discovery time and cost. However, many of these platforms lack accuracy in replicating the tissue architecture and multicellular interactions. By leveraging three-dimensional cell culture, biomimetic soft hydrogels, and engineered stimuli, in vitro models have continued to progress. Nonetheless, the incorporation of the microvasculature has been met with many challenges, specifically with the addition of parenchymal cell types. Here, a systematic approach to investigating the initial seeding density of endothelial cells and its effects on interconnected networks was taken and combined with hepatic spheroids to form a liver-on-a-chip model. Leveraging this system, nicotine's effects on microvasculature and hepatic function were investigated. The findings indicated that nicotine led to interrupted adherens junctions, decreased guanosine triphosphate cyclohydrolase 1 expression, impaired angiogenesis, and lowered barrier function, all key factors in endothelial dysfunction. With the combination of the optimized microvascular networks, a vascularized liver-on-a-chip was formed, providing functional xenobiotic metabolism and synthesis of both albumin and urea. This system provides insight into potential hepatotoxicity caused by various drugs and allows for assessing vascular dysfunction in a high throughput manner.

Development of tLyP-1 functionalized nanoliposomes with tunable internal water phase for glioma targeting

tLyP-1 peptide is verified to recognize neuropilin (NRP) receptors overexpressed on the surface of both glioma cells and endothelial cells of angiogenic blood vessels. In the present study, tLyP-1 was conjugated with DSPE-PEG2000 to prepare tLyP-1-DSPE-PEG2000, which was further employed to prepare tLyP-1 functionalized nanoliposome (tLyP-1-Lip) to achieve enhancing target of glioblastoma. Process parameters were systematically studied to investigate the feasibility of tuning the internal water phase of nanoliposomes and encapsulating more Temozolomide (TMZ). The particle size, Zeta potential, and encapsulation efficiency of tLyP-1-Lip/TMZ were fully characterized in comparison with conventional nanoliposomes (Lip-TMZ) and PEGylated nanoliposomes (PEG-Lip/TMZ). The release behaviors of TMZ from PEG-Lip/TMZ and tLyP-1-Lip/TMZ are similar and slower than TMZ-Lip in acidic solutions. The tLyP-1-Lip/TMZ demonstrated the strongest cytotoxicity in comparison with TMZ-Lip and PEG-Lip/TMZ in both U87 and HT22 cells, and displayed the highest cellular internalization. The pharmacokinetic studies in rats revealed that tLyP-1-Lip/TMZ showed a 1.4-fold (p < 0.001) increase in AUCINF_obs and a 1.4-fold decrease (p < 0.01) in clearance compared with PEG-Lip/TMZ. We finally confirmed by in vivo imaging that tLyP-1-Lip were able to penetrate the brains and tumors of mice.

Scorpion venom heat-resistant peptide alleviates mitochondrial dynamics imbalance induced by PM2.5 exposure by downregulating the PGC-1α/SIRT3 signaling pathway

Background

Epidemiological inquiry reveals that neuroinflammation and mitochondrial dysfunction caused by PM2.5 exposure are associated with Alzheimer's disease. Nevertheless, the molecular mechanisms of mitochondrial dynamics and neuroinflammation induced by PM2.5 exposure remain elusive. In this study, our objective was to explore the impact of PM2.5 on mitochondrial dynamics and neuroinflammation, while also examining the reparative potential of scorpion venom heat-resistant synthetic peptide (SVHRSP).

Methods

Western blot and quantitative reverse transcription polymerase chain reaction (RT-qPCR) were employed to ascertain the protein and gene levels of IL-1β, IL-6, and TNF-α in BV2 cells. The concentration of IL-6 in the supernatant of the BV2 cell culture was measured by enzyme-linked immunosorbent assay. For the assessment of mitochondrial homeostasis, western blot, RT-qPCR, and cellular immunohistochemistry methods were utilized to investigate the protein and gene levels of DRP1 and MFN-2 in HT22 cells. In the context of signal pathway analyses, western blot, RT-qPCR, and immunofluorescence techniques were employed to detect the protein and gene expressions of PGC-1α and SIRT3 in HT22 cells, respectively. Following the transfection with siPGC-1αRNA, downstream proteins of PGC-1α/SIRT3 pathway in HT22 cells were investigated by Western blot and RT-qPCR.

Results

The experimental findings demonstrated that exposure to PM2.5 exacerbated neuroinflammation, resulting in elevated levels of IL-1β, IL-6, and TNF-α. Furthermore, it perturbed mitochondrial dynamics, as evidenced by increased DRP1 expression and decreased MFN-2 expression. Additionally, dysfunction was observed in the PGC-1α/SIRT3 signal pathway. However, intervention with SVHRSP ameliorated the cellular damage induced by PM2.5 exposure.

Conclusions

SVHRSP alleviated neuroinflammation and mitochondrial dynamics imbalance induced by PM2.5 exposure by downregulating the PGC-1α/SIRT3 signaling pathway.

Non-Invasive, Targeted Nanoparticle-Mediated Drug Delivery across a Novel Human BBB Model

The blood-brain barrier (BBB) is a highly sophisticated system with the ability to regulate compounds transporting through the barrier and reaching the central nervous system (CNS). The BBB protects the CNS from toxins and pathogens but can cause major issues when developing novel therapeutics to treat neurological disorders. PLGA nanoparticles have been developed to successfully encapsulate large hydrophilic compounds for drug delivery. Within this paper, we discuss the encapsulation of a model compound Fitc-dextran, a large molecular weight (70 kDa), hydrophilic compound, with over 60% encapsulation efficiency (EE) within a PLGA nanoparticle (NP). The NP surface was chemically modified with DAS peptide, a ligand that we designed which has an affinity for nicotinic receptors, specifically alpha 7 nicotinic receptors, found on the surface of brain endothelial cells. The attachment of DAS transports the NP across the BBB by receptor-mediated transcytosis (RMT). Assessment of the delivery efficacy of the DAS-conjugated Fitc-dextran-loaded PLGA NP was studied in vitro using our optimal triculture in vitro BBB model, which successfully replicates the in vivo BBB environment, producing high TEER (≥230 ) and high expression of ZO1 protein. Utilising our optimal BBB model, we successfully transported fourteen times the concentration of DAS-Fitc-dextran-PLGA NP compared to non-conjugated Fitc-dextran-PLGA NP. Our novel in vitro model is a viable method of high-throughput screening of potential therapeutic delivery systems to the CNS, such as our receptor-targeted DAS ligand-conjugated NP, whereby only lead therapeutic compounds will progress to in vivo studies.

From cells to organoids: The evolution of blood-brain barrier technology for modelling drug delivery in brain cancer

Brain cancer remains the deadliest cancer. The blood-brain barrier (BBB) is impenetrable to most drugs and is a complex 3D network of multiple cell types including endothelial cells, astrocytes, and pericytes. In brain cancers, the BBB becomes disrupted during tumor progression and forms the blood-brain tumor barrier (BBTB). To advance therapeutic development, there is a critical need for physiologically relevant BBB in vitro models. 3D cell systems are emerging as valuable preclinical models to accelerate discoveries for diseases. Given the versatility and capability of 3D cell models, their potential for modelling the BBB and BBTB is reviewed. Technological advances of BBB models and challenges of in vitro modelling the BBTB, and application of these models as tools for assessing therapeutics and nano drug delivery, are discussed. Quantitative, in vitro BBB models that are predictive of effective brain cancer therapies will be invaluable for accelerating advancing new treatments to the clinic.

Magnetic nanoparticles: multifunctional tool for cancer therapy

INTRODUCTION

Cancer has one of the highest mortality rates globally. The traditional therapies used to treat cancer have harmful adverse effects. Considering these facts, researchers have explored new therapeutic possibilities with enhanced benefits. Nanoparticle development for cancer detection, in addition to therapy, has shown substantial progress over the past few years.

AREA COVERED

Herein, the latest research regarding cancer treatment employing magnetic nanoparticles (MNPs) in chemo-, immuno-, gene-, and radiotherapy along with hyperthermia is summarized, in addition to their physio-chemical features, advantages, and limitations for clinical translation have also been discussed.

EXPERT OPINION

MNPs are being extensively investigated and developed into effective modules for cancer therapy. They are highly functional tools aimed at cancer therapy owing to their excellent superparamagnetic, chemical, biocompatible, physical, and biodegradable properties.

Nanomedicine based strategies for oligonucleotide traversion across the blood-brain barrier

Neurological disorders are considered the most prominent cause of disability worldwide. The major hurdle in the management of neurological disorders is the existence of the blood-brain barrier (BBB), which hinders the entry of several therapeutic moieties. In recent years, oligonucleotides have gained tremendous attention for their target specificity, diminished dose and adverse effects, thereby halting disease progression. However, enzymatic degradation, rapid clearance, limited circulation and availability at the bio-active site, etc., limit its clinical translation. Nanomedicine has opened up a breadth of opportunities in the delivery of oligonucleotides across the BBB. This review addresses the pitfalls associated with oligonucleotide delivery in traversing the BBB via nanotherapeutics for the management of brain disorders. Regulatory perspectives pertaining to hastening the clinical translation of oligonucleotide-loaded nanocarriers for brain delivery have been highlighted.

Atmospheric particulate matter impairs cognition by modulating synaptic function via the nose-to-brain route

Atmospheric particulate matter (PM), a ubiquitous air pollutant, is the leading environmental risk factor for mortality worldwide. Experimental and epidemiological studies consistently suggest a strong link between long-term exposure to PM_2.5 (<2.5 μm, fine PM) and cognitive impairment. The neuroinflammatory response is presumed to be one of the main mechanisms of PM_2.5-induced cognitive impairment, possibly leading to synaptic dysfunction. However, the main route and mechanism underlying the cause of cognitive dysfunction and pathogenic alterations in PM_2.5-exposure mice remain poorly understood. Therefore, this study aimed to investigate the main route and mechanism of PM_2.5-induced cognitive impairment. Our results showed that PM_2.5 directly entered the brain following nasal administration, and both the short-term PM_2.5 administration via atomization and nasal drops induced learning and memory impairments and neuronal damage in adult mice. Moreover, astrocytes and microglia were both activated in the two short-term PM_2.5 exposure models, while few changes in the inflammatory response were observed in the peripheral circulatory system. Furthermore, a further transcriptional analysis revealed that short-term PM_2.5 administration led to cognitive impairment mainly by modulating synaptic functions and that although glia were activated, the glia-related pathological pathways were not significantly activated. Notably, following PM_2.5 exposure, PLX3397-induced microglial deletion did not restore the cognitive function of the mice. In conclusion, our results provide evidence that PM_2.5 enters the brain via the nose-to-brain route to impair cognitive function, and short-term exposure to PM_2.5 directly alters synaptic function rather than the neuroinflammatory response to affect cognition.

An integrative analysis of miRNA and mRNA expression in the brains of Alzheimer's disease transgenic mice after real-world PM2.5 exposure

Fine particulate matter (PM_2.5) is associated with increased risks of Alzheimer's disease (AD), yet the toxicological mechanisms of PM_2.5 promoting AD remain unclear. In this study, wild-type and APP/PS1 transgenic mice (AD mice) were exposed to either filtered air (FA) or PM_2.5 for eight weeks with a real-world exposure system in Taiyuan, China (mean PM_2.5 concentration in the cage was 61 µg/m³). We found that PM_2.5 exposure could remarkably aggravate AD mice's ethological and brain ultrastructural damage, along with the elevation of the pro-inflammatory cytokines (IL-6 and TNF-α), Aβ-42 and AChE levels and the decline of ChAT levels in the brains. Based on high-throughput sequencing results, some differentially expressed (DE) mRNAs and DE miRNAs in the brains of AD mice after PM_2.5 exposure were screened. Using RT-qPCR, seven DE miRNAs (mmu-miR-193b-5p, 122b-5p, 466h-3p, 10b-5p, 1895, 384-5p, and 6412) and six genes (Pcdhgb8, Unc13b, Robo3, Prph, Pter, and Tbata) were evidenced the and verified. Two miRNA-target gene pairs (miR-125b-Pcdhgb8 pair and miR-466h-3p-IL-17Rα/TGF-βR2/Aβ-42/AChE pairs) were demonstrated that they were more related to PM_2.5-induced brain injury. Results of Gene Ontology (GO) pathways and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways predicted that synaptic and postsynaptic regulation, axon guidance, Wnt, MAPK, and mTOR pathways might be the possible regulatory mechanisms associated with pathological response. These revealed that PM_2.5-elevated pro-inflammatory cytokine levels and PM_2.5-altered neurotransmitter levels in AD mice could be the important causes of brain damage and proposed the promising miRNA and mRNA biomarkers and potential miRNA-mRNA interaction networks of PM_2.5-promoted AD.

Size-dependent neurotoxicity of micro- and nanoplastics in flowing condition based on an in vitro microfluidic study

With the widespread presence of plastic wastes, knowledge about the potential environmental risks and bioavailability of micro- or nanoplastics fragmented from large analogs is of utmost importance. As the particle size matters in mediating endocytic mechanism and particle internalization, we first studied the effects of polystyrene microparticles (PS-MPs, 1 μm) and polystyrene nanoparticles (PS-NPs, 100 nm) of two different sizes at varying concentrations of 5, 25 and 75 μg/mL on the mouse hippocampal neuronal HT22 cells. The in vitro study showed efficient cellular uptake of PS-MPs and PS-NPs of both sizes. The adverse effects of cellular metabolic activity as reflective of excess Reactive Oxygen Species (ROS) and cell cycle S phase arresting were observed especially at the greater concentration of smaller-sized PS particles, consequently leading to mild cytotoxicity. We further evaluated the dynamic particle-cell interaction with a continuous supply of PS particles using a microfluidic device. By recapitulating the in vivo mechanical microenvironments while allowing homogeneous distribution of PS particles, the dynamic exposure to PS particles of both sizes under flowing conditions resulted in much lesser viability of neural cells than the traditional static exposure. As the flowing dynamics may avoid the gravitational settling of particles and allow more efficient cellular uptake, the size distribution, together with the exposure configurations, contributed significantly to the determination of the PS particle cytotoxicity. The on-chip investigation and a better understanding of particle translocation mechanisms would offer very much to the risk assessment of PS particles on human health.

Organ-On-A-Chip Models of the Blood-Brain Barrier: Recent Advances and Future Prospects

The human brain and central nervous system (CNS) present unique challenges in drug development for neurological diseases. One major obstacle is the blood-brain barrier (BBB), which hampers the effective delivery of therapeutic molecules into the brain while protecting it from blood-born neurotoxic substances and maintaining CNS homeostasis. For BBB research, traditional in vitro models rely upon Petri dishes or Transwell systems. However, these static models lack essential microenvironmental factors such as shear stress and proper cell-cell interactions. To this end, organ-on-a-chip (OoC) technology has emerged as a new in vitro modeling approach to better recapitulate the highly dynamic in vivo human brain microenvironment so-called the neural vascular unit (NVU). Such BBB-on-a-chip models have made substantial progress over the last decade, and concurrently there has been increasing interest in modeling various neurological diseases such as Alzheimer's disease and Parkinson's disease using OoC technology. In addition, with recent advances in other scientific technologies, several new opportunities to improve the BBB-on-a-chip platform via multidisciplinary approaches are available. In this review, an overview of the NVU and OoC technology is provided, recent progress and applications of BBB-on-a-chip for personalized medicine and drug discovery are discussed, and current challenges and future directions are delineated.

The therapeutic benefits of intravenously administrated nanoparticles in stroke and age-related neurodegenerative diseases

The mean global lifetime risk of neurological disorders such as stroke, Alzheimer's disease (AD), and Parkinson's disease (PD) has shown a large effect on economy and society.Researchersare stillstruggling to find effective drugs to treatneurological disordersand drug delivery through the blood-brain barrier (BBB) is a major challenge to be overcome. The BBB is a specialized multicellular barrier between the peripheral blood circulation and the neural tissue. Unique and selective features of the BBB allow it to tightly control brain homeostasis as well as the movement of ions and molecules. Failure in maintaining any of these substances causes BBB breakdown and subsequently enhances neuroinflammation and neurodegeneration.BBB disruption is evident in many neurologicalconditions.Nevertheless, the majority of currently available therapies have tremendous problems for drug delivery into the impaired brain. Nanoparticle (NP)-mediated drug delivery has been considered as a profound substitute to solve this problem. NPs are colloidal systems with a size range of 1-1000 nm whichcan encapsulate therapeutic payloads, improve drug passage across the BBB, and target specific brain areas in neurodegenerative/ischemic diseases. A wide variety of NPs has been displayed for the efficient brain delivery of therapeutics via intravenous administration, especially when their surfaces are coated with targeting moieties. Here, we discuss recent advances in the development of NP-based therapeutics for the treatment of stroke, PD, and AD as well as the factors affecting their efficacy after systemic administration.

A predictive microfluidic model of human glioblastoma to assess trafficking of blood-brain barrier-penetrant nanoparticles

The blood–brain barrier represents a significant challenge for the treatment of high-grade gliomas, and our understanding of drug transport across this critical biointerface remains limited. To advance preclinical therapeutic development for gliomas, there is an urgent need for predictive in vitro models with realistic blood–brain-barrier vasculature. Here, we report a vascularized human glioblastoma multiforme (GBM) model in a microfluidic device that accurately recapitulates brain tumor vasculature with self-assembled endothelial cells, astrocytes, and pericytes to investigate the transport of targeted nanotherapeutics across the blood–brain barrier and into GBM cells. Using modular layer-by-layer assembly, we functionalized the surface of nanoparticles with GBM-targeting motifs to improve trafficking to tumors. We directly compared nanoparticle transport in our in vitro platform with transport across mouse brain capillaries using intravital imaging, validating the ability of the platform to model in vivo blood–brain-barrier transport. We investigated the therapeutic potential of functionalized nanoparticles by encapsulating cisplatin and showed improved efficacy of these GBM-targeted nanoparticles both in vitro and in an in vivo orthotopic xenograft model. Our vascularized GBM model represents a significant biomaterials advance, enabling in-depth investigation of brain tumor vasculature and accelerating the development of targeted nanotherapeutics.

Advances in Hydrogel-Based Microfluidic Blood–Brain-Barrier Models in Oncology Research

The intrinsic architecture and complexity of the brain restricts the capacity of therapeutic molecules to reach their potential targets, thereby limiting therapeutic possibilities concerning neurological ailments and brain malignancy. As conventional models fail to recapitulate the complexity of the brain, progress in the field of microfluidics has facilitated the development of advanced in vitro platforms that could imitate the in vivo microenvironments and pathological features of the blood–brain barrier (BBB). It is highly desirous that developed in vitro BBB-on-chip models serve as a platform to investigate cancer metastasis of the brain along with the possibility of efficiently screening chemotherapeutic agents against brain malignancies. In order to improve the proficiency of BBB-on-chip models, hydrogels have been widely explored due to their unique physical and chemical properties, which mimic the three-dimensional (3D) micro architecture of tissues. Hydrogel-based BBB-on-chip models serves as a stage which is conducive for cell growth and allows the exchange of gases and nutrients and the removal of metabolic wastes between cells and the cell/extra cellular matrix (ECM) interface. Here, we present recent advancements in BBB-on-chip models targeting brain malignancies and examine the utility of hydrogel-based BBB models that could further strengthen the future application of microfluidic devices in oncology research.

Blood-brain barrier crossing using magnetic stimulated nanoparticles

Due to the low permeability and high selectivity of the blood-brain barrier (BBB), existing brain therapeutic technologies are limited by the inefficient BBB crossing of conventional drugs. Magnetic nanoparticles (MNPs) have shown great potential as nano-carriers for efficient BBB crossing under the external static magnetic field (SMF). To quantify the impact of SMF on MNPs' in vivo dynamics towards BBB crossing, we developed a physiologically based pharmacokinetic (PBPK) model for intraperitoneal (IP) injected superparamagnetic iron oxide nanoparticles coated by gold and conjugated with poly (ethylene glycol) (PEG) (SPIO-Au-PEG NPs) in mice. Unlike most reported PBPK models that ignore brain permeability, we first obtained the brain permeabilities with and without SMF by determining the concentration of SPIO-Au-PEG NPs in the cerebral blood and brain tissue. This concentration in the brain was simulated by the advection-diffusion equations and was numerically solved in COMSOL Multiphysics. The results from the PBPK model after incorporating the brain permeability showed a good agreement (regression coefficient R² = 0.848) with the in vivo results, verifying the capability of using the proposed PBPK model to predict the in vivo biodistribution of SPIO-Au-PEG NPs under the exposure to SMF. Furthermore, the in vivo results revealed that the distribution coefficient from blood to brain under the exposure to SMF (4.01%) is slightly better than the control group (3.68%). In addition, the modification of SPIO-Au-PEG NPs with insulin (SPIO-Au-PEG-insulin) showed an improvement of the brain bioavailability by 24.47% in comparison to the non-insulin group. With the SMF stimulation, the brain bioavailability of SPIO-Au-PEG-insulin was further improved by 3.91% compared to the group without SMF. The PBPK model and in vivo validation in this paper lay a solid foundation for future study on non-invasive targeted drug delivery to the brain.

Pharmacokinetics of PEGylated Gold Nanoparticles: In Vitro-In Vivo Correlation

Data suitable for assembling a physiologically-based pharmacokinetic (PBPK) model for nanoparticles (NPs) remain relatively scarce. Therefore, there is a trend in extrapolating the results of in vitro and in silico studies to in vivo nanoparticle hazard and risk assessment. To evaluate the reliability of such approach, a pharmacokinetic study was performed using the same polyethylene glycol-coated gold nanoparticles (PEG-AuNPs) in vitro and in vivo. As in vitro models, human cell lines TH1, A549, Hep G2, and 16HBE were employed. The in vivo PEG-AuNP biodistribution was assessed in rats. The internalization and exclusion of PEG-AuNPs in vitro were modeled as first-order rate processes with the partition coefficient describing the equilibrium distribution. The pharmacokinetic parameters were obtained by fitting the model to the in vitro data and subsequently used for PBPK simulation in vivo. Notable differences were observed in the internalized amount of Au in individual cell lines compared to the corresponding tissues in vivo, with the highest found for renal TH1 cells and kidneys. The main reason for these discrepancies is the absence of natural barriers in the in vitro conditions. Therefore, caution should be exercised when extrapolating in vitro data to predict the in vivo NP burden and response to exposure.

Engineered human blood-brain barrier microfluidic model for vascular permeability analyses

The blood-brain barrier (BBB) greatly restricts the entry of biological and engineered therapeutic molecules into the brain. Due to challenges in translating results from animal models to the clinic, relevant in vitro human BBB models are needed to assess pathophysiological molecular transport mechanisms and enable the design of targeted therapies for neurological disorders. This protocol describes an in vitro model of the human BBB self-assembled within microfluidic devices from stem-cell-derived or primary brain endothelial cells, and primary brain pericytes and astrocytes. This protocol requires 1.5 d for device fabrication, 7 d for device culture and up to 5 d for downstream imaging, protein and gene expression analyses. Methodologies to measure the permeability of any molecule in the BBB model, which take 30 min per device, are also included. Compared with standard 2D assays, the BBB model features relevant cellular organization and morphological characteristics, as well as values of molecular permeability within the range expected in vivo. These properties, coupled with a functional brain endothelial expression profile and the capability to easily test several repeats with low reagent consumption, make this BBB model highly suitable for widespread use in academic and industrial laboratories.

A Human Neurovascular Unit On-a-Chip

Protection of the central nervous system (CNS) and cerebral homeostasis depend upon the blood-brain barrier (BBB) functions and permeability. BBB restrictive permeability hinders drug delivery for the treatment of several neurodegenerative diseases and brain tumors. Several in vivo animal models and in vitro systems have been developed to understand the BBB complex mechanisms and aid in the design of improved therapeutic strategies. However, there are still many limitations that should be addressed to achieve the structural and chemical environment of a human BBB. We developed a microfluidic-based model of the neurovascular unit. A monolayer of human cerebral endothelial cells (hCMEC-D3) was grown and cocultured with human brain microvascular pericytes (hBMVPC), and human induced pluripotent stem cells differentiated into astrocytes (hiPSC-AC) and neurons (hiPSC-N). To visualize the physiological morphology of each cell type, we used fluorescent cell-specific markers and confocal microscopy. Permeation of fluorescent solutes with different molecular weights was measured to demonstrate that the developed BBB was selectively permeable as a functional barrier.

In Vitro Models of the Blood-Brain Barrier

Traditional in vitro models can replicate many essential features of drug transport/permeability across the blood-brain barrier (BBB) but are not entirely projecting in vivo central nervous system (CNS) uptake. Species differences fail to translate experimental therapeutics from the research laboratory to the clinic. Improved in vitro modeling of human BBB is vital for both CNS drug discovery and delivery. High-end human BBB models fabricated by microfluidic technologies offer some solutions to this problem. BBB's complex physiological microenvironment has been established by increasing device complexity in terms of multiple cells, dynamic conditions, and 3D designs. It is now possible to predict the therapeutic effects of a candidate drug and identify new druggable targets by studying multicellular interactions using the advanced in vitro BBB models. This chapter reviews the current as well as an ideal in vitro model of the BBB.

Dynamic 3D On-Chip BBB Model Design, Development, and Applications in Neurological Diseases

The blood-brain barrier (BBB) is a vital structure for maintaining homeostasis between the blood and the brain in the central nervous system (CNS). Biomolecule exchange, ion balance, nutrition delivery, and toxic molecule prevention rely on the normal function of the BBB. The dysfunction and the dysregulation of the BBB leads to the progression of neurological disorders and neurodegeneration. Therefore, in vitro BBB models can facilitate the investigation for proper therapies. As the demand increases, it is urgent to develop a more efficient and more physiologically relevant BBB model. In this review, the development of the microfluidics platform for the applications in neuroscience is summarized. This article focuses on the characterizations of in vitro BBB models derived from human stem cells and discusses the development of various types of in vitro models. The microfluidics-based system and BBB-on-chip models should provide a better platform for high-throughput drug-screening and targeted delivery.

Magnetic Nanoparticles Used in Oncology

Recently, magnetic nanoparticles (MNPs) have more and more often been used in experimental studies on cancer treatments, which have become one of the biggest challenges in medical research. The main goal of this research is to treat and to cure advanced or metastatic cancer with minimal side effects through nanotechnology. Drug delivery approaches take into account the fact that MNPs can be bonded to chemotherapeutical drugs, nucleic acids, synthetized antibodies or radionuclide substances. MNPs can be guided, and different treatment therapies can be applied, under the influence of an external magnetic field. This paper reviews the main MNPs’ synthesis methods, functionalization with different materials and highlight the applications in cancer therapy. In this review, we describe cancer cell monitorization based on different types of magnetic nanoparticles, chemotherapy, immunotherapy, magnetic hyperthermia, gene therapy and ferroptosis. Examples of applied treatments on murine models or humans are analyzed, and glioblastoma cancer therapy is detailed in the review. MNPs have an important contribution to diagnostics, investigation, and therapy in the so called theranostics domain. The main conclusion of this paper is that MNPs are very useful in different cancer therapies, with limited side effects, and they can increase the life expectancy of patients with cancer drug resistance.

Air Pollution and Alzheimer's Disease: A Systematic Review and Meta-Analysis

BACKGROUND

Ambient air pollution has been associated with Alzheimer's disease (AD) in the elderly. However, its effects on AD have not been meta-analyzed comprehensively.

OBJECTIVE

We conducted a systematic review and meta-analysis to assess the associations between air pollution and AD incidence.

METHODS

We searched PubMed and Web of Science for indexed publications up to March 2020. Odds risk (OR) and confidence intervals (CI) were estimated for particulate matter (PM)10 (PM10), PM2.5, ozone (O3), nitrogen dioxide (NO2), sulfur dioxide (SO2), and carbon monoxide (CO). The subgroup analysis was conducted based on the pollution levels.

RESULTS

Nine studies were included in the meta-analysis and review. The OR per 10μg/m3 increase of PM2.5 was 1.95 (95% CI: 0.88-4.30). The corresponding values per 10μg/m3 increment of other pollutants were 1.03 (95% CI: 0.68-1.57) for O3, 1.00 (95% CI: 0.89-1.13) for NO2, and 0.95 (95% CI: 0.91-0.99) for PM10 (only one study), respectively. Overall OR of the five air pollutants above with AD was 1.32 (95% CI: 1.09-1.61), suggesting a positive association between ambient air pollution and AD incidence. The sub-analysis indicated that the OR (2.20) in heavily polluted regions was notably higher than that in lightly polluted regions (1.06). Although AD risk rate data related to SO2 or CO exposure are still limited, the epidemiologic and toxicological evidence indicated that higher concentration of SO2 or CO exposure increased risks of dementia, implying that SO2 or CO might have a potential impact on AD.

CONCLUSION

Air pollution exposure may exacerbate AD development.

Biology and Models of the Blood-Brain Barrier

The blood-brain barrier (BBB) is one of the most selective endothelial barriers. An understanding of its cellular, morphological, and biological properties in health and disease is necessary to develop therapeutics that can be transported from blood to brain. In vivo models have provided some insight into these features and transport mechanisms adopted at the brain, yet they have failed as a robust platform for the translation of results into clinical outcomes. In this article, we provide a general overview of major BBB features and describe various models that have been designed to replicate this barrier and neurological pathologies linked with the BBB. We propose several key parameters and design characteristics that can be employed to engineer physiologically relevant models of the blood-brain interface and highlight the need for a consensus in the measurement of fundamental properties of this barrier.

Bioengineered microfluidic blood-brain barrier models in oncology research

Metastasis is the major reason for most brain tumors with up to a 50% chance of occurrence in patients with other types of malignancies. Brain metastasis occurs if cancer cells succeed to cross the 'blood-brain barrier' (BBB). Moreover, changes in the structure and function of BBB can lead to the onset and progression of diseases including neurological disorders and brain-metastases. Generating BBB models with structural and functional features of intact BBB is highly important to better understand the molecular mechanism of such ailments and finding novel therapeutic agents targeting them. Hence, researchers are developing novel in vitro BBB platforms that can recapitulate the structural and functional characteristics of BBB. Brain endothelial cells-based in vitro BBB models have thus been developed to investigate the mechanism of brain metastasis through BBB and facilitate the testing of brain targeted anticancer drugs. Bioengineered constructs integrated with microfluidic platforms are vital tools for recapitulating the features of BBB in vitro closely as possible. In this review, we outline the fundamentals of BBB biology, recent developments in the microfluidic BBB platforms, and provide a concise discussion of diverse types of bioengineered BBB models with an emphasis on the application of them in brain metastasis and cancer research in general. We also provide insights into the challenges and prospects of the current bioengineered microfluidic platforms in cancer research.

The CCL2-CCR2 astrocyte-cancer cell axis in tumor extravasation at the brain

Although brain metastases are common in cancer patients, little is known about the mechanisms of cancer extravasation across the blood-brain barrier (BBB), a key step in the metastatic cascade that regulates the entry of cancer cells into the brain parenchyma. Here, we show, in a three-dimensional in vitro BBB microvascular model, that astrocytes promote cancer cell transmigration via their secretion of C-C motif chemokine ligand 2 (CCL2). We found that this chemokine, produced primarily by astrocytes, promoted the chemotaxis and chemokinesis of cancer cells via their C-C chemokine receptor type 2 (CCR2), with no notable changes in vascular permeability. These findings were validated in vivo, where CCR2-deficient cancer cells exhibited significantly reduced rates of arrest and transmigration in mouse brain capillaries. Our results reveal that the CCL2-CCR2 astrocyte-cancer cell axis plays a fundamental role in extravasation and, consequently, metastasis to the brain.

Physiological and Pathological Factors Affecting Drug Delivery to the Brain by Nanoparticles

The prevalence of neurological/neurodegenerative diseases, such as Alzheimer's disease is known to be increasing due to an aging population and is anticipated to further grow in the decades ahead. The treatment of brain diseases is challenging partly due to the inaccessibility of therapeutic agents to the brain. An increasingly important observation is that the physiology of the brain alters during many brain diseases, and aging adds even more to the complexity of the disease. There is a notion that the permeability of the blood-brain barrier (BBB) increases with aging or disease, however, the body has a defense mechanism that still retains the separation of the brain from harmful chemicals in the blood. This makes drug delivery to the diseased brain, even more challenging and complex task. Here, the physiological changes to the diseased brain and aged brain are covered in the context of drug delivery to the brain using nanoparticles. Also, recent and novel approaches are discussed for the delivery of therapeutic agents to the diseased brain using nanoparticle based or magnetic resonance imaging guided systems. Furthermore, the complement activation, toxicity, and immunogenicity of brain targeting nanoparticles as well as novel in vitro BBB models are discussed.

Characterizing the Role of Biologically Relevant Fluid Dynamics on Silver Nanoparticle Dependent Oxidative Stress in Adherent and Suspension In Vitro Models

Silver nanoparticles (AgNPs) are being employed in numerous consumer goods and applications; however, they are renowned for inducing negative cellular consequences including toxicity, oxidative stress, and an inflammatory response. Nanotoxicological outcomes are dependent on numerous factors, including physicochemical, biological, and environmental influences. Currently, NP safety evaluations are carried out in both cell-based in vitro and animal in vivo models, with poor correlation between these mechanisms. These discrepancies highlight the need for enhanced exposure environments, which retain the advantages of in vitro models but incorporate critical in vivo influences, such as fluid dynamics. This study characterized the effects of dynamic flow on AgNP behavior, cellular interactions, and oxidative stress within both adherent alveolar (A549) and suspension monocyte (U937) models. This study determined that the presence of physiologically relevant flow resulted in substantial modifications to AgNP cellular interactions and subsequent oxidative stress, as assessed via reactive oxygen species (ROS), glutathione levels, p53, NFκB, and secretion of pro-inflammatory cytokines. Within the adherent model, dynamic flow reduced AgNP deposition and oxidative stress markers by roughly 20%. However, due to increased frequency of contact, the suspension U937 cells were associated with higher NP interactions and intracellular stress under fluid flow exposure conditions. For example, the increased AgNP association resulted in a 50% increase in intracellular ROS and p53 levels. This work highlights the potential of modified in vitro systems to improve analysis of AgNP dosimetry and safety evaluations, including oxidative stress assessments.

Uptake of polymeric nanoparticles in a human induced pluripotent stem cell-based blood-brain barrier model: Impact of size, material, and protein corona

The blood-brain barrier (BBB) maintains the homeostasis of the central nervous system, which is one of the reasons for the treatments of brain disorders being challenging in nature. Nanoparticles (NPs) have been seen as potential drug delivery systems to the brain overcoming the tight barrier of endothelial cells. Using a BBB model system based on human induced pluripotent stem cells (iPSCs), the impact of polymeric nanoparticles has been studied in relation to nanoparticle size, material, and protein corona. PLGA [poly(lactic-co-glycolic acid)] and PLLA [poly(d,l-lactide)] nanoparticles stabilized with Tween® 80 were synthesized (50 and 100 nm). iPSCs were differentiated into human brain microvascular endothelial cells (hBMECs), which express prominent BBB features, and a tight barrier was established with a high transendothelial electrical resistance of up to 4000 Ω cm². The selective adsorption of proteins on the PLGA and PLLA nanoparticles resulted in a high percentage of apolipoproteins and complement components. In contrast to the prominently used BBB models based on animal or human cell lines, the present study demonstrates that the iPSC-based model is suited to study interactions with nanoparticles in correlation with their material, size, and protein corona composition. Furthermore, asymmetrical flow field-flow fractionation enables the investigation of size and agglomeration state of NPs in biological relevant media. Even though a similar composition of the protein corona has been detected on NP surfaces by mass spectrometry, and even though similar amounts of NP are interacting with hBMECs, 100 nm-sized PLGA NPs do impact the barrier, forming endothelial cells in an undiscovered manner.

3D Self-Organized Human Blood-Brain Barrier in a Microfluidic Chip

A preclinical blood-brain barrier (BBB) model is important for the study of fundamental transport mechanisms and in accessing the delivery of small molecules and antibodies that target brain. Transwell assays for BBB models are easy to create and use but lack the true 3D anatomy of the brain microvasculature and also often the cell-cell and cell-matrix interactions that are important in ensuring a tight BBB. Here we describe the formation of a BBB that expresses neurovascular membrane transporters, tight junction, and extracellular matrix proteins using the coculture of human-induced pluripotent stem cell-derived endothelial cells (iPSC-EC), brain pericytes (PC), and astrocytes (AC) in a microfluidic device. The BBB model recapitulates human brain vascular permeability with values that are lower than conventional in vitro models and are comparable to in vivo measurements in rat brain. This in vitro BBB model can therefore be used to screen for brain-targeting drugs or to study neurovascular functions.

Personalized dynamic transport of magnetic nanorobots inside the brain vasculature

Delivering specific bioactive agents with sufficient bioavailability to the targeted brain area across blood brain barrier remains a big challenge. Magnetically driven nanorobots have demonstrated their potential for controlled drug delivery. However, the dynamic transport of these nanorobots inside each individual's brain vasculature is not yet well studied. Addressing this is a critical step forward to controlled drug delivery for non-invasive brain therapeutics. In this paper, we develop an analytical model describing the personalized dynamic transport of spherical magnetic nanorobots inside the brain vasculature reconstructed from the patient's angiography images. By inverting the transporting process, we first design the patient-specific transport path based on the reconstructed vascular model, and then calculate the magnetic force required to drive these nanorobots from the analytical model. Also, a finite element model is created to simulate the inverse design process, which implies that the delivery efficiency of these magnetically driven nanorobots to the targeted brain area can be increased by 20% and almost 95% nanorobots arrive at the desired vessel walls. In the end, a simplified brain vascular model is printed using PolyJet 3D 750 to demonstrate the dynamic transport of these nanorobots toward the targeted site. The proposed theoretical modeling, numerical simulation and experimental validation lay solid foundation toward non-invasive brain therapeutics with maximal accuracy and minimal side effects.

Modeling Nanocarrier Transport across a 3D In Vitro Human Blood-Brain-Barrier Microvasculature

Polymer nanoparticles (NPs), due to their small size and surface functionalization potential have demonstrated effective drug transport across the blood-brain-barrier (BBB). Currently, the lack of in vitro BBB models that closely recapitulate complex human brain microenvironments contributes to high failure rates of neuropharmaceutical clinical trials. In this work, a previously established microfluidic 3D in vitro human BBB model, formed by the self-assembly of human-induced pluripotent stem cell-derived endothelial cells, primary brain pericytes, and astrocytes in triculture within a 3D fibrin hydrogel is exploited to quantify polymer NP permeability, as a function of size and surface chemistry. Microvasculature are perfused with commercially available 100-400 nm fluorescent polystyrene (PS) NPs, and newly synthesized 100 nm rhodamine-labeled polyurethane (PU) NPs. Confocal images are taken at different timepoints and computationally analyzed to quantify fluorescence intensity inside/outside the microvasculature, to determine NP spatial distribution and permeability in 3D. Results show similar permeability of PS and PU NPs, which increases after surface-functionalization with brain-associated ligand holo-transferrin. Compared to conventional transwell models, the method enables rapid analysis of NP permeability in a physiologically relevant human BBB set-up. Therefore, this work demonstrates a new methodology to preclinically assess NP ability to cross the human BBB.

Fine particulate matter aggravates intestinal and brain injury and affects bacterial community structure of intestine and feces in Alzheimer's disease transgenic mice

Fine particulate matter (PM_2.5) was a risk factor for neurological disorders when emerging studies revealed that PM_2.5 affected the bacterial community structure of gut in Alzheimer's disease (AD) patients. The purpose of this study was to explore the effects of PM_2.5 on intestinal and brain injury and on bacterial community structure in the intestine and feces of APP/PS1 transgenic mice exposed to PM_2.5 for eight weeks with a real-world whole-body inhalation exposure system in Taiyuan, China. The brain and intestinal tissues were collected to evaluate histopathological changes by HE staining. TNF-α and IL-6 levels in intestines, brains, and serums, and Aβ-42 levels in brains were detected. Intestinal and fecal samples were subjected to 16S rRNA gene sequencing. Results showed that PM_2.5 significantly aggravated the pathological injury in intestines and brains in AD mice with elevated pro-inflammatory cytokine levels. The estimators of Shannon, Simpson, Chao1, and ACE indexes reflected the diversity and richness of the bacterial community. Compared with the FA-WT group, the FA-AD group had lower diversity and richness when the PM_2.5-AD group had the highest ones. PCA and NMDS revealed the specific influence of PM_2.5 on the bacterial community of intestine and feces because that the PM_2.5-FA and PM_2.5-AD group clumped visibly closer than the other groups in both bacterial communities of intestine and feces. The KEGG pathway analysis predicted the vital functional genes and metabolic pathways in the bacterial community of PM_2.5-AD mice. This study indicated the histopathological changes and inflammation in the intestine and brain were seriously caused in PM_2.5-AD mice when the α-diversity of the bacterial community in intestine and feces was visibly changed.

Modeling Nanocarrier Transport across a 3D In Vitro Human Blood-Brain-Barrier Microvasculature

Polymer nanoparticles (NPs), due to their small size and surface functionalization potential have demonstrated effective drug transport across the blood-brain-barrier (BBB). Currently, the lack of in vitro BBB models that closely recapitulate complex human brain microenvironments contributes to high failure rates of neuropharmaceutical clinical trials. In this work, a previously established microfluidic 3D in vitro human BBB model, formed by the self-assembly of human-induced pluripotent stem cell-derived endothelial cells, primary brain pericytes, and astrocytes in triculture within a 3D fibrin hydrogel is exploited to quantify polymer NP permeability, as a function of size and surface chemistry. Microvasculature are perfused with commercially available 100-400 nm fluorescent polystyrene (PS) NPs, and newly synthesized 100 nm rhodamine-labeled polyurethane (PU) NPs. Confocal images are taken at different timepoints and computationally analyzed to quantify fluorescence intensity inside/outside the microvasculature, to determine NP spatial distribution and permeability in 3D. Results show similar permeability of PS and PU NPs, which increases after surface-functionalization with brain-associated ligand holo-transferrin. Compared to conventional transwell models, the method enables rapid analysis of NP permeability in a physiologically relevant human BBB set-up. Therefore, this work demonstrates a new methodology to preclinically assess NP ability to cross the human BBB.

In-vivo vascular application via ultra-fast bioprinting for future 5D personalised nanomedicine

The design of 3D complex structures enables new correlation studies between the engineering parameters and the biological activity. Moreover, additive manufacturing technology could revolutionise the personalised medical pre-operative management due to its possibility to interplay with computer tomography. Here we present a method based on rapid freeze prototyping (RFP) 3D printer, reconstruction cutting, nano dry formulation, fast freeze gelation, disinfection and partial processes for the 5D digital models functionalisation. We elaborated the high-resolution computer tomography scan derived from a complex human peripheral artery and we reconstructed the 3D model of the vessel in order to obtain and verify the additive manufacturing processes. Then, based on the drug-eluting balloon selected for the percutaneous intervention, we reconstructed the biocompatible eluting-freeform coating containing 40 nm fluorescent nanoparticles (NPs) by means of RFP printer and we tested the in-vivo feasibility. We introduced the NPs-loaded 5D device in a rat's vena cava. The coating dissolved in a few minutes releasing NPs which were rapidly absorbed in vascular smooth muscle cell (VSMC) and human umbilical vein endothelial cell (HUVEC) in-vitro. We developed 5D high-resolution self-dissolving devices incorporating NPs with the perspective to apply this method to the personalised medicine.

Microengineered human blood-brain barrier platform for understanding nanoparticle transport mechanisms

Challenges in drug development of neurological diseases remain mainly ascribed to the blood-brain barrier (BBB). Despite the valuable contribution of animal models to drug discovery, it remains difficult to conduct mechanistic studies on the barrier function and interactions with drugs at molecular and cellular levels. Here we present a microphysiological platform that recapitulates the key structure and function of the human BBB and enables 3D mapping of nanoparticle distributions in the vascular and perivascular regions. We demonstrate on-chip mimicry of the BBB structure and function by cellular interactions, key gene expressions, low permeability, and 3D astrocytic network with reduced reactive gliosis and polarized aquaporin-4 (AQP4) distribution. Moreover, our model precisely captures 3D nanoparticle distributions at cellular levels and demonstrates the distinct cellular uptakes and BBB penetrations through receptor-mediated transcytosis. Our BBB platform may present a complementary in vitro model to animal models for prescreening drug candidates for the treatment of neurological diseases.

Lab-On-A-Chip for the Development of Pro-/Anti-Angiogenic Nanomedicines to Treat Brain Diseases

There is a huge demand for pro-/anti-angiogenic nanomedicines to treat conditions such as ischemic strokes, brain tumors, and neurodegenerative diseases such as Alzheimer’s and Parkinson’s. Nanomedicines are therapeutic particles in the size range of 10–1000 nm, where the drug is encapsulated into nano-capsules or adsorbed onto nano-scaffolds. They have good blood–brain barrier permeability, stability and shelf life, and able to rapidly target different sites in the brain. However, the relationship between the nanomedicines’ physical and chemical properties and its ability to travel across the brain remains incompletely understood. The main challenge is the lack of a reliable drug testing model for brain angiogenesis. Recently, microfluidic platforms (known as “lab-on-a-chip” or LOCs) have been developed to mimic the brain micro-vasculature related events, such as vasculogenesis, angiogenesis, inflammation, etc. The LOCs are able to closely replicate the dynamic conditions of the human brain and could be reliable platforms for drug screening applications. There are still many technical difficulties in establishing uniform and reproducible conditions, mainly due to the extreme complexity of the human brain. In this paper, we review the prospective of LOCs in the development of nanomedicines for brain angiogenesis–related conditions.

Recent Progress in Microfluidic Models of the Blood-Brain Barrier

The blood-brain barrier (BBB) is a critical physical and chemical barrier that maintains brain homeostasis. Researchers in academia and industry are highly motivated to develop experimental models that can accurately mimic the physiological characteristics of the BBB. Microfluidic systems, which manipulate fluids at the micrometer scale, are ideal tools for simulating the BBB microenvironment. In this review, we summarized the progress in the design and evaluation of microfluidic in vitro BBB models, including advances in chip materials, porous membranes, the use of endothelial cells, the importance of shear stress, the detection specific markers to monitor tight junction formation and integrity, measurements of TEER and permeability. We also pointed out several shortcomings of the current microfluidic models. The purpose of this paper is to let the readers understand the characteristics of different types of model design, and select appropriate design parameters according to the research needs, so as to obtain the best experimental results. We believe that the microfluidics BBB models will play an important role in neuroscience and pharmaceutical research.

Advances in Microfluidic Blood-Brain Barrier (BBB) Models

Therapeutic options for neurological disorders currently remain limited. The intrinsic complexity of the brain architecture prevents potential therapeutics from reaching their cerebral target, thus limiting their efficacy. Recent advances in microfluidic technology and organ-on-chip systems have enabled the development of a new generation of in vitro platforms that can recapitulate complex in vivo microenvironments and physiological responses. In this context, microfluidic-based in vitro models of the blood-brain barrier (BBB) are of particular interest as they provide an innovative approach for conducting research related to the brain, including modeling of neurodegenerative diseases and high-throughput drug screening. Here, we present the most recent advances in BBB-on-chip devices and examine validation steps that will strengthen their future applications.

Fine particulate matter induces mitochondrial dysfunction and oxidative stress in human SH-SY5Y cells

Exposure to ambient fine particulate matter (PM_2.5) is associated with neurodegenerative diseases. Mitochondrion is key to brain degeneration. However, the underlying mechanism of PM_2.5-induced brain injury, especially mitochondrial damage, is still unclear. In this study, changes in mitochondrial dynamics, mitochondrial permeability transition pore (mPTP), mitochondrial DNA (mtDNA) and oxidative stress in human SH-SY5Y cells exposed to PM_2.5 at different concentrations (0, 25, 100, and 250 μg mL^-1) were investigated. The results showed that PM_2.5 caused more mitochondrial swell, accompanied by the opening of mPTP and the decrease of ATP levels, mitochondrial membrane potential and mtDNA copy number in SH-SY5Y cells. PM_2.5 significantly enhanced the expression of mitochondrial fission/fusion genes (Drp1 and OPA1) and affected the gene expression of CypD, SIRT3, and COX Ⅳ in SH-SY5Y cells. Besides, PM_2.5 triggered the increase of cellular ROS, Ca²⁺ and Aβ-42 levels, inhibition of manganese-superoxide dismutase (SOD₂) activities, reduction of GSH levels GSH/GSSG ratio, and elevation of mitochondrial malondialdehyde contents. It suggests that mitochondrial dysfunction and oxidative stress are the potential mechanisms underlying PM_2.5-induced brain nerve cell injury, which may be related to neurological diseases. Additionally, our study elucidated that PM_2.5 components trigger different cytotoxicity.

Temperature-Controlled Microfluidic System Incorporating Polymer Tubes

Here, we demonstrate a multilayered microfluidic system integrated with commercially available polymer tubes for controlling the temperature of the sample under various static and dynamic conditions. Highly controllable temperature profiles can be produced by modulating the flow rate or inlet temperature of the water passing through the tubes. Customised temperature gradients can be created across the length or width of a channel by mismatching the inlet temperature of the tubes. Temperature cycles can also be produced by repeatedly switching the tubes between hot and cold flasks. Proof-of-concept experiments demonstrate the utility of this system for studying the drug-induced calcium signaling of human monocytes under dynamic thermal conditions. The versatility and simplicity of our system provides opportunities for studying temperature-sensitive chemical, biochemical, and biological samples under various operating conditions.

Nanotheranostics, a future remedy of neurological disorders

INTRODUCTION

Effective therapy of various neurological disorders is hindered on account of the failure of various therapeutics crossing blood-brain-barrier (BBB). Nanotheranostics has emerged as a cutting-edge unconventional theranostic nanomedicine, capable of realizing accurate diagnosis together with effective and targeted delivery of therapeutics across BBB to the unhealthy regions of the brain for potential clinical success.

AREAS COVERED

We have tried to review the current status of nanotheranostic based approaches followed to manage neurological disorders. The focus has been majorly laid on to explore various theranostic nanoparticles and their application potential towards image-guided neurotherapies. Additionally, the usefulness of exceptional diagnostic, imaging techniques including magnetic resonance imaging and fluorescence imaging are being discussed by highlighting their promising opportunities in the detection, diagnosis, and treatment of the neurological disorders.

EXPERT OPINION

Inimitable diagnostic and therapeutic potential of nanotheranostics have accomplished the aim of personalized therapies by governing the therapeutic efficacy of the system along with facilitating patient pre-selection grounded on non-invasive imaging, thereby predicting the responses of patients to nanomedicine treatments. While these accomplishments are encouraging, they are still the minority and demands for a continuous effort to improve sensitivity and precision in screening/diagnosis along with improving therapeutic efficacy in various neural disorders.

Effect of flow on targeting and penetration of angiopep-decorated nanoparticles in a microfluidic model blood-brain barrier

The blood-brain barrier (BBB) limits transport of nanoparticles from the circulation to the brain parenchyma. Angiopep-2, a peptide which functions as a brain transport vector, can be coupled to nanoparticles in order to facilitate binding and internalization by brain endothelial cells (ECs), and subsequent BBB penetration. This multi-step process may be affected by blood flow over brain ECs, as flow influences endothelial cell phenotype as well as interactions of nanoparticles with ECs. In the present study a microfluidic BBB model was constructed to evaluate binding and internalization by brain ECs, as well as BBB penetration of Angiopep-2 coupled liposomes (Ang2-Liposomes) in static and flow conditions. Ang2 conjugation to liposomes markedly improved binding relative to unconjugated liposomes. Ang2-Liposomes bound and were internalized efficiently by brain endothelial cells after static incubation or with 1 dyne/cm² of fluid shear stress (FSS), while binding was reduced at a FSS of 6 dyne/cm². Penetration of the model microfluidic BBB by Ang2-Liposomes was higher at a FSS of 1 dyne/cm² and 6 dyne/cm² than with static incubation. Analysis of barrier function and control experiments for receptor-mediated penetration provided insight into the magnitude of transcellular versus paracellular transport at each tested FSS. Overall, the results demonstrate that flow impacted the binding and BBB penetration of Ang2-functionalized nanoparticles. This highlights the relevance of the local flow environment for in vitro modeling of the performance of nanoparticles functionalized with BBB penetrating ligands.

3D self-organized microvascular model of the human blood-brain barrier with endothelial cells, pericytes and astrocytes

The blood-brain barrier (BBB) regulates molecular trafficking, protects against pathogens, and prevents efficient drug delivery to the brain. Models to date failed to reproduce the human anatomical complexity of brain barriers, contributing to misleading results in clinical trials. To overcome these limitations, a novel 3-dimensional BBB microvascular network model was developed via vasculogenesis to accurately replicate the in vivo neurovascular organization. This microfluidic system includes human induced pluripotent stem cell-derived endothelial cells, brain pericytes, and astrocytes as self-assembled vascular networks in fibrin gel. Gene expression of membrane transporters, tight junction and extracellular matrix proteins, was consistent with computational analysis of geometrical structures and quantitative immunocytochemistry, indicating BBB maturation and microenvironment remodelling. Confocal microscopy validated microvessel-pericyte/astrocyte dynamic contact-interactions. The BBB model exhibited perfusable and selective microvasculature, with permeability lower than conventional in vitro models, and similar to in vivo measurements in rat brain. This robust and physiologically relevant BBB microvascular model offers an innovative and valuable platform for drug discovery to predict neuro-therapeutic transport efficacy in pre-clinical applications as well as recapitulate patient-specific and pathological neurovascular functions in neurodegenerative disease.