Observation of ice-like water layers at an aqueous protein surface

Solvation of molecules from the family of "domain of unknown function" 3494 and their ability to bind to ice

In 2012, the molecular structure of a new, broad class of ice-binding proteins, classified as "domain of unknown function" (DUF) 3494, was described for the first time. These proteins have a common tertiary structure and are characterized by a very wide spectrum of antifreeze activity (from weakly active to hyperactive). The ice-binding surface (IBS) region of these molecules differs significantly in its structure from the IBS of previously known antifreeze proteins (AFPs), showing a complete lack of regularity and high hydrophilicity. The presence of a regular, repeating structural motif in the IBS region of hitherto known AFP molecules, combined with the hydrophobic nature of this surface, promotes the formation of an ice-like ordering of the solvation water layer and, as a result, facilitates the process of transformation of this water layer into ice. It is, therefore, surprising that the newly discovered DUF3494 class of proteins clearly breaks out of this characteristic. In this paper, using molecular dynamics simulations, we analyze the solvation water structure of the IBS region of both DUF3494 family molecules and AFPs. As we show, although the IBS of DUF3494 molecules does not form an ice-like water structure in the solvation layer, this is compensated by the formation of the equivalent of "anchored clathrate water," in the form of a relatively large number of water molecules bound to the surface of the protein molecule and providing potential binding sites for it to the ice surface.

Pronounced Cold Crystallization and Hydrogen Bonding Distortion of Water Confined in Microphases of Double Zwitterionic Block Copolymer Aqueous Solutions

Advanced materials leveraging water control are garnering considerable interest, with the state of water emerging as a critical aspect of material design. This study explored the impact of microphase separation on water using aqueous solutions of double zwitterionic diblock copolymers, specifically poly(carboxybetaine methacrylate) and poly(sulfobetaine methacrylate) (PCB2-b-PSB4). These copolymers form a mesoscale periodic ordered lattice structure consisting of two distinct aqueous phases. Through differential scanning calorimetry and X-ray emission spectroscopy, it was found that water in these PCB2-b-PSB4 aqueous solutions exhibits pronounced cold crystallization and subtle distortions in hydrogen-bonding configurations.

Interfacial Ice Density Fluctuations Inform Surface Ice-Philicity

The propensity of a surface to nucleate ice or bind to ice is governed by its ice-philicity─its relative preference for ice over liquid water. However, the relationship between the features of a surface and its ice-philicity is not well understood, and for surfaces with chemical or topographical heterogeneity, such as proteins, their ice-philicity is not even well-defined. In the analogous problem of surface hydrophobicity, it has been shown that hydrophobic surfaces display enhanced low water-density (vapor-like) fluctuations in their vicinity. To interrogate whether enhanced ice-like fluctuations are similarly observed near ice-philic surfaces, here we use molecular simulations and enhanced sampling techniques. Using a family of model surfaces for which the wetting coefficient, k, has previously been characterized, we show that the free energy of observing rare interfacial ice-density fluctuations decreases monotonically with increasing k. By utilizing this connection, we investigate a set of fcc systems and find that the (110) surface is more ice-philic than the (111) or (100) surfaces. By additionally analyzing the structure of interfacial ice, we find that all surfaces prefer to bind to the basal plane of ice, and the topographical complementarity of the (110) surface to the basal plane explains its higher ice-philicity. Using enhanced interfacial ice-like fluctuations as a measure of surface ice-philicity, we then characterize the ice-philicity of chemically heterogeneous and topologically complex systems. In particular, we study the spruce budworm antifreeze protein (sbwAFP), which binds to ice using a known ice-binding site (IBS) and resists engulfment using nonbinding sites of the protein (NBSs). We find that the IBS displays enhanced interfacial ice-density fluctuations and is therefore more ice-philic than the two NBSs studied. We also find the two NBSs are similarly ice-phobic. By establishing a connection between interfacial ice-like fluctuations and surface ice-philicity, our findings thus provide a way to characterize the ice-philicity of heterogeneous surfaces.

Long-range, water-mediated interaction between a moderately active antifreeze protein molecule and the surface of ice

Using molecular dynamics simulations, we show that a molecule of moderately active antifreeze protein (type III AFP, QAE HPLC-12 isoform) is able to interact with ice in an indirect manner. This interaction occurs between the ice binding site (IBS) of the AFP III molecule and the surface of ice, and it is mediated by liquid water, which separates these surfaces. As a result, the AFP III molecule positions itself at a specific orientation and distance relative to the surface of ice, which enables the effective binding (via hydrogen bonds) of the molecule with the nascent ice surface. Our results show that the final adsorption of the AFP III molecule on the surface of ice is not achieved by chaotic diffusion movements, but it is preceded by a remote, water-mediated interaction between the IBS and the surface of ice. The key factor that determines the existence of this interaction is the ability of water molecules to spontaneously form large, high-volume aggregates that can be anchored to both the IBS of the AFP molecule and the surface of ice. The results presented in this work for AFP III are in full agreement with the ones obtained by us previously for hyperactive CfAFP, which indicates that the mechanism of the remote interaction of these molecules with ice remains unchanged despite significant differences in the molecular structure of their ice binding sites. For that reason, we can expect that also other types of AFPs interact with the ice surface according to an analogous mechanism.

Metabolites, ions, and the mechanisms behind seasonal cold hardening of Pyrochroa coccinea (Pyrochroidae) larvae

The larvae of the black headed cardinal beetle Pyrochroa coccinea, overwinters under the bark of dead logs in northern European dioecious forests, and are thus exposed to temperatures below the melting point of their bodily fluids. Here we explore the mechanisms behind their seasonal cold hardening by characterising field samples collected monthly throughout the year. Both the lower lethal temperature and supercooling point dropped as much as 10℃ in the second half of November, reaching values around -15℃ by the beginning of December. This change was accompanied by a 320 mosmol/kg increase in hemolymph osmolality, which is a doubling compared to the summer levels. We used NMR metabolomics to identify and measure the absolute concentrations of the responsible cryoprotective C-H containing metabolites in the hemolymph. The largest increase was found to be in either glucose or trehalose, with an average total increase of 120 mM. Proline, alanine, and choline concentrations were found to increase by around 10 mM each. Contrarily, phosphocholine and phosphoethanolamine were halved, resulting in a total decrease of around 50 mM. These measurements were complemented with ion exchange chromatography measurements. This allowed us to account for all the osmotic pressure in the summer hemolymph, and the measured concentration changes explained as much as 40 % of the observed osmolality increase upon cold hardening. Preliminary results indicate that the remainder may be explained by non-colligative protein contributions.

Role of tungsten disulfide quantum dots in specific protein-protein interactions at air-water interface

The intriguing network of antibody-antigen (Ab-Ag) interactions is highly governed by environmental perturbations and the nature of biomolecular interaction. Protein-protein interactions (PPIs) have potential applications in developing protein-adsorption-based sensors and nano-scale materials. Therefore, characterizing PPIs in the presence of a nanomaterial at the molecular level becomes imperative. The present work involves the investigation of antiferritin-ferritin (Ab-Ag) protein interactions under the influence of tungsten disulfide quantum dots (WS2 QDs). Isothermal calorimetry and contact angle measurements validated the strong influence of WS2 QDs on Ab-Ag interactions. The interfacial signatures of nano-bio-interactions were evaluated using sum frequency generation vibration spectroscopy (SFG-VS) at the air-water interface. Our SFG results reveal a variation in the tilt angle of methyl groups by ∼12° ± 2° for the Ab-Ag system in the presence of WS2 QDs. The results illustrated an enhanced ordering of water molecules in the presence of QDs, which underpins the active role of interfacial water molecules during nano-bio-interactions. We have also witnessed a differential impact of QDs on Ab-Ag by raising the concentration of the Ab-Ag combination, which showcased an increased inter-molecular interaction among the Ab and Ag molecules and a minimal influence on the methyl tilt angle. These findings suggest the formation of stronger and ordered Ab-Ag complexes upon introducing WS2 QDs in the aqueous medium and signify the potentiality of WS2 QDs relevant to protein-based sensing assays.

Ice Recrystallization Unveils the Binding Mechanism Operating at a Diffused Interface

Recrystallization of ice is a natural phenomenon that causes adverse effects in cryopreservation, agriculture, and in frozen food industry. It has long been recognized that ice recrystallization occurs through the Ostwald ripening and accretion processes. However, neither of these processes has been explored in microscopic detail by state-of-the-art experimental techniques. We carried out atomistic molecular dynamics (MD) simulations to explore ice recrystallization through the accretion process. Attempts have been made to elucidate the binding mechanism that is operating at the diffused ice-water interface. It is demonstrated that two ice crystals spontaneously recognize each other and bind together to form a large crystal in liquid water, resulting in ice recrystallization by accretion. Interestingly, the study reveals that the binding occurs due to the freezing of the interfacial water layer present between the two ice planes, even at a temperature above the melting point of the ice crystal. The synergistically enhanced ordering effect of two ice surfaces on the interfacial water leads to such freezing occurring during the binding process. However, proper crystallographic alignment is not necessarily required for the binding of the two crystals. Simulations have also been carried out to study the binding between an ice crystal and the model ice-binding surface (IBS) of an antifreeze protein above the melting point of the ice crystal. It is found that such binding at the IBS is accompanied by freezing of the interfacial water. This establishes that the synergetic ordering-driven freezing of interfacial water is a common binding mechanism at the diffused surfaces of ice crystals. We believe that this mechanism will provide a microscopic understanding of the process of recrystallization inhibition and thus help in designing suitable materials for potent applications in recrystallization inhibition.

Cryopreservation of organoids: Strategies, innovation, and future prospects

Organoid technology has demonstrated unique advantages in multidisciplinary fields such as disease research, tumor drug sensitivity, clinical immunity, drug toxicology, and regenerative medicine. It will become the most promising research tool in translational research. However, the long preparation time of organoids and the lack of high-quality cryopreservation methods limit the further application of organoids. Although the high-quality cryopreservation of small-volume biological samples such as cells and embryos has been successfully achieved, the existing cryopreservation methods for organoids still face many bottlenecks. In recent years, with the development of materials science, cryobiology, and interdisciplinary research, many new materials and methods have been applied to cryopreservation. Several new cryopreservation methods have emerged, such as cryoprotectants (CPAs) of natural origin, ice-controlled biomaterials, and rapid rewarming methods. The introduction of these technologies has expanded the research scope of cryopreservation of organoids, provided new approaches and methods for cryopreservation of organoids, and is expected to break through the current technical bottleneck of cryopreservation of organoids. This paper reviews the progress of cryopreservation of organoids in recent years from three aspects: damage factors of cryopreservation of organoids, new protective agents and loading methods, and new technologies of cryopreservation and rewarming.

Divergent Mechanisms of Ice Growth Inhibition by Antifreeze Proteins

Antifreeze proteins (AFPs) are biomolecules that can bind to ice and hinder its growth, thus holding significant potential for biotechnological and biomedical applications. AFPs are a subset of ice-binding proteins (IBPs) and are found in various organisms across different life kingdoms. This mini-review investigates the underlying mechanisms by which AFPs impede ice growth, emphasizing the disparities between hyperactive and moderate AFPs. Hyperactive AFPs exhibit heightened thermal hysteresis (TH) activity and can bind to both the basal and prism planes of ice crystals, enabling them to endure extremely cold temperatures. In contrast, moderate AFPs predominantly bind to the prism/pyramidal planes and demonstrate lower TH activity. The structural diversity of AFPs and the presence of ordered water molecules on their ice-binding sites (IBS) have been subjects of debate among researchers. Multiple hypotheses have been proposed concerning the significance of ordered water molecules in ice binding. Gaining insights into the binding dynamics and the factors influencing TH activity in AFPs is crucial for the development of efficient synthetic compounds and the establishment of comprehensive models to elucidate ice growth inhibition. Here we emphasize the necessity for further research to unravel the mechanisms of AFPs and presents a pathway for constructing models capable of comprehensively explaining their inhibitory effects on ice growth.

Mechanism of antifreeze protein functioning and the "anchored clathrate water" concept

In liquid water, there is a natural tendency to form aggregates that consist of water molecules linked by hydrogen bonds. Such spontaneously formed aggregates are surrounded by a "sea" of disordered water molecules, with both forms remaining in equilibrium. The process of creating water aggregates also takes place in the solvation water of proteins, but in this case, the interactions of water molecules with the protein surface shift the equilibrium of the process. In this paper, we analyze the structural properties of the solvation water in antifreeze proteins (AFPs). The results of molecular dynamics analysis with the use of various parameters related to the structure of solvation water on the protein surface are presented. We found that in the vicinity of the active region responsible for the binding of AFPs to ice, the equilibrium is clearly shifted toward the formation of "ice-like aggregates," and the solvation water has a more ordered ice-like structure. We have demonstrated that a reduction in the tendency to create "ice-like aggregates" results in a significant reduction in the antifreeze activity of the protein. We conclude that shifting the equilibrium in favor of the formation of "ice-like aggregates" in the solvation water in the active region is a prerequisite for the biological functionality of AFPs, at least for AFPs having a well-defined ice binding area. In addition, our results fully confirm the validity of the "anchored clathrate water" concept, formulated by Garnham et al. [Proc. Natl. Acad. Sci. U. S. A. 108, 7363 (2011)].

Engulfment Avalanches and Thermal Hysteresis for Antifreeze Proteins on Supercooled Ice

Antifreeze proteins (AFPs) bind to the ice-water surface and prevent ice growth at temperatures below 0 °C through a Gibbs-Thomson effect. Each adsorbed AFP creates a metastable depression on the surface that locally resists ice growth, until ice engulfs the AFP. We recently predicted the susceptibility to engulfment as a function of AFP size, distance between AFPs, and supercooling [ J. Chem. Phys. 2023, 158, 094501]. For an ensemble of AFPs adsorbed on the ice surface, the most isolated AFPs are the most susceptible, and when an isolated AFP gets engulfed, its former neighbors become more isolated and more susceptible to engulfment. Thus, an initial engulfment event can trigger an avalanche of subsequent engulfment events, leading to a sudden surge of unrestrained ice growth. This work develops a model to predict the supercooling at which the first engulfment event will occur for an ensemble of randomly distributed AFP pinning sites on an ice surface. Specifically, we formulate an inhomogeneous survival probability that accounts for the AFP coverage, the distribution of AFP neighbor distances, the resulting ensemble of engulfment rates, the ice surface area, and the cooling rate. We use the model to predict thermal hysteresis trends and compare with experimental data.

Free energy barriers for anti-freeze protein engulfment in ice: Effects of supercooling, footprint size, and spatial separation

Anti-freeze proteins (AFPs) protect organisms at freezing conditions by attaching to the ice surface and arresting its growth. Each adsorbed AFP locally pins the ice surface, resulting in a metastable dimple for which the interfacial forces counteract the driving force for growth. As supercooling increases, these metastable dimples become deeper, until metastability is lost in an engulfment event where the ice irreversibly swallows the AFP. Engulfment resembles nucleation in some respects, and this paper develops a model for the "critical profile" and free energy barrier for the engulfment process. Specifically, we variationally optimize the ice-water interface and estimate the free energy barrier as a function of the supercooling, the AFP footprint size, and the distance to neighboring AFPs on the ice surface. Finally, we use symbolic regression to derive a simple closed-form expression for the free energy barrier as a function of two physically interpretable, dimensionless parameters.

Real-Time Optical Measurements of Nanoparticle-Induced Melting and Resolidification Dynamics

The photothermally induced nanoscale dynamics of rapid melting and resolidification of a thin layer of molecular material surrounding a nanoparticle is examined in real time by an all-optical approach. The method employs pulsed periodic modulation of the medium's dielectric constant through absorption of a low-duty-cycle laser pulse train by a single nanoparticle that acts as a localized heating source. Interpretation of experimental data, including inference of a phase change and of the liquid/solid interface dynamics, is obtained by comparing experimental data with results from coupled optical-thermal numerical simulations. The combined experimental/computational workflow presented in this proof-of-principle study will enable future explorations of material parameters at nanoscale, which are often different from their bulk values and in many cases difficult to infer from macroscopic measurements.

Control strategies of ice nucleation, growth, and recrystallization for cryopreservation

The cryopreservation of biomaterials is fundamental to modern biotechnology and biomedicine, but the biggest challenge is the formation of ice, resulting in fatal cryoinjury to biomaterials. To date, abundant ice control strategies have been utilized to inhibit ice formation and thus improve cryopreservation efficiency. This review focuses on the mechanisms of existing control strategies regulating ice formation and the corresponding applications to biomaterial cryopreservation, which are of guiding significance for the development of ice control strategies. Herein, basics related to biomaterial cryopreservation are introduced first. Then, the theoretical bases of ice nucleation, growth, and recrystallization are presented, from which the key factors affecting each process are analyzed, respectively. Ice nucleation is mainly affected by melting temperature, interfacial tension, shape factor, and kinetic prefactor, and ice growth is mainly affected by solution viscosity and cooling/warming rate, while ice recrystallization is inhibited by adsorption or diffusion mechanisms. Furthermore, the corresponding research methods and specific control strategies for each process are summarized. The review ends with an outlook of the current challenges and future perspectives in cryopreservation. STATEMENT OF SIGNIFICANCE: Ice formation is the major limitation of cryopreservation, which causes fatal cryoinjury to cryopreserved biomaterials. This review focuses on the three processes related to ice formation, called nucleation, growth, and recrystallization. The theoretical models, key influencing factors, research methods and corresponding ice control strategies of each process are summarized and discussed, respectively. The systematic introduction on mechanisms and control strategies of ice formation is instructive for the cryopreservation development.

Poly(vinyl alcohol) Molecular Bottlebrushes Nucleate Ice

Ice binding proteins (IBP) have evolved to limit the growth of ice but also to promote ice formation by ice-nucleating proteins (INPs). IBPs, which modulate these seemingly distinct processes, often have high sequence similarities, and molecular size/assembly is hypothesized to be a crucial determinant. There are only a few synthetic materials that reproduce INP function, and rational design of ice nucleators has not been achieved due to outstanding questions about the mechanisms of ice binding. Poly(vinyl alcohol) (PVA) is a water-soluble synthetic polymer well known to effectively block ice recrystallization, by binding to ice. Here, we report the synthesis of a polymeric ice nucleator, which mimics the dense assembly of IBPs, using confined ice-binding polymers in a high-molar-mass molecular bottlebrush. Poly(vinyl alcohol)-based molecular bottlebrushes with different side-chain densities were synthesized via a combination of ring-opening metathesis polymerization (ROMP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization, using "grafting-to" and "grafting-through" approaches. The facile preparation of the PVA bottlebrushes was performed via selective hydrolysis of the acetate of the poly(vinyl acetate) (PVAc) side chains of the PVAc bottlebrush precursors. Ice-binding polymer side-chain density was shown to be crucial for nucleation activity, with less dense brushes resulting in colder nucleation than denser brushes. This bio-inspired approach provides a synthetic framework for probing heterogeneous ice nucleation and a route toward defined synthetic nucleators for biotechnological applications.

Electron microscopy and calorimetry of proteins in supercooled water

Some of the best nucleating agents in nature are ice-nucleating proteins, which boost ice growth better than any other material. They can induce immersion freezing of supercooled water only a few degrees below 0 °C. An open question is whether this ability also extends to the deposition mode, i.e., to water vapor. In this work, we used three proteins, apoferritin, InaZ (ice nucleation active protein Z), and myoglobin, of which the first two are classified as ice-nucleating proteins for the immersion freezing mode. We studied the ice nucleation ability of these proteins by differential scanning calorimetry (immersion freezing) and by environmental scanning electron microscopy (deposition freezing). Our data show that InaZ crystallizes water directly from the vapor phase, while apoferritin first condenses water in the supercooled state, and subsequently crystallizes it, just as myoglobin, which is unable to nucleate ice.

Roles of interfacial water states on advanced biomedical material design

When biomedical materials come into contact with body fluids, the first reaction that occurs on the material surface is hydration; proteins are then adsorbed and denatured on the hydrated material surface. The amount and degree of denaturation of adsorbed proteins affect subsequent cell behavior, including cell adhesion, migration, proliferation, and differentiation. Biomolecules are important for understanding the interactions and biological reactions of biomedical materials to elucidate the role of hydration in biomedical materials and their interaction partners. Analysis of the water states of hydrated materials is complicated and remains controversial; however, knowledge about interfacial water is useful for the design and development of advanced biomaterials. Herein, we summarize recent findings on the hydration of synthetic polymers, supramolecular materials, inorganic materials, proteins, and lipid membranes. Furthermore, we present recent advances in our understanding of the classification of interfacial water and advanced polymer biomaterials, based on the intermediate water concept.

Crystal Nucleation and Growth of Inorganic Ionic Materials from Aqueous Solution: Selected Recent Developments, and Implications

In this review article, selected, latest theoretical, and experimental developments in the field of nucleation and crystal growth of inorganic materials from aqueous solution are highlighted, with a focus on literature after 2015 and on non-classical pathways. A key point is to emphasize the so far underappreciated role of water and solvent entropy in crystallization at all stages from solution speciation through to the final crystal. While drawing on examples from current inorganic materials where non-classical behavior has been proposed, the potential of these approaches to be adapted to a wide-range of systems is also discussed, while considering the broader implications of the current re-assessment of pathways for crystallization. Various techniques that are suitable for the exploration of crystallization pathways in aqueous solution, from nucleation to crystal growth are summarized, and a flow chart for the assignment of specific theories based on experimental observations is proposed.

Inhibition Effect of Ti3C2Tx MXene on Ice Crystals Combined with Laser-Mediated Heating Facilitates High-Performance Cryopreservation

The phenomena of ice formation and growth are of great importance for climate science, regenerative medicine, cryobiology, and food science. Hence, how to control ice formation and growth remains a challenge in these fields and attracts great interest from widespread researchers. Herein, the ice regulation ability of the two-dimensional MXene Ti₃C₂T_x in both the cooling and thawing processes is explored. Molecularly speaking, the ice growth inhibition mechanism of Ti₃C₂T_x MXene is ascribed to the formation of hydrogen bonds between functional groups of -O-, -OH, and -F distributed on the surface of Ti₃C₂T_x and ice/water molecules, which was elucidated by the molecular dynamics simulation method. In the cooling process, Ti₃C₂T_x can decrease the supercooling degree and inhibit the sharp edge morphology of ice crystals. Moreover, taking advantage of the outstanding photothermal conversion property of Ti₃C₂T_x, rapid ice melting can be achieved, thus reducing the phenomena of devitrification and ice recrystallization. Based on the ice restriction performance of Ti₃C₂T_x mentioned above, Ti₃C₂T_x is applied for cryopreservation of stem-cell-laden hydrogel constructs. The results show that Ti₃C₂T_x can reduce cryodamage to stem cells induced by ice injury in both the cooling and thawing processes and finally increase the cell viability from 38.4% to 80.9%. In addition, Ti₃C₂T_x also shows synergetic antibacterial activity under laser irradiation, thus realizing sterile cryopreservation of stem cells. Overall, this work explores the ice inhibition performance of Ti₃C₂T_x, elucidates the physical mechanism, and further achieves application of Ti₃C₂T_x in the field of cell cryopreservation.

Binding affinity and conformation of a conjugated AS1411 aptamer at a cationic lipid bilayer interface

Aptamers have been widely used in the detection, diagnosis, and treatment of cancer. Owing to their special binding affinity toward cancer-related biomarkers, aptamers can be used for targeted drug delivery or bio-sensing/bio-imaging in various scenarios. The interfacial properties of aptamers play important roles in controlling the surface charge, recognition efficiency, and binding affinity of drug-delivering lipid-based carriers. In this research, the interfacial behaviors, such as surface orientation, molecular conformation, and adsorption kinetics of conjugated AS1411 molecules at different cationic lipid bilayer interfaces were investigated by sum frequency generation vibrational spectroscopy (SFG-VS) in situ and in real-time. It is shown that the conjugated AS1411 molecules at the DMTAP bilayer interface show a higher binding affinity but with slower binding kinetics compared to the DMDAP bilayer interface. The analysis results also reveal that the thymine residues of cholesteryl conjugated AS1411 molecules show higher conformational ordering compared to the thymine residues of the alkyl chain conjugated AS1411 molecules. These understandings provide unique molecular insight into the aptamer-lipid membrane interactions, which may help researchers to improve the efficiency and safety of aptamer-related drug delivery systems.

Do antifreeze proteins generally possess the potential to promote ice growth?

The binding of antifreeze proteins (AFPs) to ice needs to be mediated by interfacial water molecules. Our previous study of the effect of AFPs on the dynamics of the interfacial water of freezing at its initial stage has shown that AFPs can promote the growth of ice before binding to it. However, whether different AFPs can promote the freezing of water molecules on the basal and the prismatic surfaces of ice still needs further study. In the present contribution, five representative natural AFPs with different structures and different activities that can be adsorbed on the basal and/or prismatic surfaces of ice are investigated at the atomic level. Our results show that the phenomenon of promoting the growth of ice crystals is not universal. Only hyperactive AFPs (hypAFPs) can promote the growth of the basal plane of ice, while moderately active AFPs cannot. Moreover, this significant promotion is not observed on the prismatic plane regardless of their activity. Further analysis indicates that this promotion may result from the thicker ice/water interface of the basal plane, and the synergy of hypAFPs with ice crystals.

Critical In-Plane Density of Polyelectrolyte Brush for the Ordered Hydrogen-Bonded Structure of Incorporated Water

A polymer electrolyte brush is a reasonable platform to confine water molecules within a nanoscopic area to study their role in the function of interacting media because of their adjustable nanospace and charge by changing the in-plane density and side chains of the brush. Here, we demonstrate how the in-plane spacing of cationic polymer brush chains, poly[2-(methacryloyloxy)ethyltrimethylammonium chloride] (PMTAC), affects the hydrogen bond configuration of incorporated water using soft X-ray emission spectroscopy. At the critical in-plane density σ = 0.30 chains/nm² of PMTAC, tetrahedrally coordinated water molecules started to melt into distorted or broken hydrogen-bonded configurations. Considering the charge on the quaternary ammonium cations, the electric field required to form a tetrahedrally coordinated hydrogen-bonded configuration was estimated as ∼500 kV cm^-1 and is effective up to ∼1 nm from the surface of the polymer chain. These findings are useful for designing specific interface properties and the resultant surface function of polyelectrolyte-based materials.

Ice Recrystallization Inhibition Is Insufficient to Explain Cryopreservation Abilities of Antifreeze Proteins

Antifreeze proteins (AFPs) and glycoproteins (AFGPs) are exemplary at modifying ice crystal growth and at inhibiting ice recrystallization (IRI) in frozen solutions. These properties make them highly attractive for cold storage and cryopreservation applications of biological tissue, food, and other water-based materials. The specific requirements for optimal cryostorage remain unknown, but high IRI activity has been proposed to be crucial. Here, we show that high IRI activity alone is insufficient to explain the beneficial effects of AF(G)Ps on human red blood cell (hRBC) survival. We show that AF(G)Ps with different IRI activities cause similar cell recoveries of hRBCs and that a modified AFGP variant with decreased IRI activity shows increased cell recovery. The AFGP variant was found to have enhanced interactions with a hRBC model membrane, indicating that the capability to stabilize cell membranes is another important factor for increasing the survival of cells after cryostorage. This information should be considered when designing novel synthetic cryoprotectants.

Sequence Modulates Polypeptoid Hydration Water Structure and Dynamics

We use molecular dynamics simulations to investigate the effect of polypeptoid sequence on the structure and dynamics of its hydration waters. Polypeptoids provide an excellent platform to study small-molecule hydration in disordered polymers, as they can be precisely synthesized with a variety of sidechain chemistries. We examine water behavior near a set of peptoid oligomers in which the number and placement of nonpolar versus polar sidechains are systematically varied. To do this, we leverage a new computational workflow enabling accurate sampling of polypeptoid conformations. We find that the hydration waters are less dense, are more tetrahedral, and have slower dynamics compared to bulk water. The magnitude of these shifts increases with the number of nonpolar groups. We also find that shifts in the water structure and dynamics are strongly correlated, suggesting that experimental insight into the dynamics of hydration water obtained by Overhauser dynamic nuclear polarization (ODNP) also contains information about water structural properties. We then demonstrate the ability of ODNP to probe site-specific dynamics of hydration water near these model peptoid systems.

Site-Specific Water Dynamics in the First Hydration Layer of an Anti-Freeze Glyco-Protein: A Simulation Study

Antifreeze glycoproteins (AFGPs) inhibit ice recrystallization by a mechanism remaining largely elusive. Dynamics of AFGPs’ hydration water and its involvement in the antifreeze activity, for instance, have not been identified...

Probing the Bovine Hemoglobin Adsorption Process and its Influence on Interfacial Water Structure at the Air-Water Interface

*These authors contributed equally to this work.The molecular-level insight of protein adsorption and its kinetics at interfaces is crucial because of its multifold role in diverse fundamental biological processes and applications. In the present study, the sum frequency generation (SFG) vibrational spectroscopy has been employed to demonstrate the adsorption process of bovine hemoglobin (BHb) protein molecules at the air-water interface at interfacial isoelectric point of the protein. It has been observed that surface coverage of BHb molecules significantly influences the arrangement of the protein molecules at the interface. The time-dependent SFG studies at two different frequencies in the fingerprint region elucidate the kinetics of protein denaturation process and its influence on the hydrogen-bonding network of interfacial water molecules at the air-water interface. The initial growth kinetics suggests the synchronized behavior of protein adsorption process with the structural changes in the interfacial water molecules. Interestingly, both the events carry similar characteristic time constants. However, the conformational changes in the protein structure due to the denaturation process stay for a long time, whereas the changes in water structure reconcile quickly. It is revealed that the protein denaturation process is followed by the advent of strongly hydrogen-bonded water molecules at the interface. In addition, we have also carried out the surface tension kinetics measurements to complement the findings of our SFG spectroscopic results.

Antifreeze proteins and their biomimetics for cell cryopreservation: Mechanism, function and application-A review

Cell-based therapy is a promising technology for intractable diseases and health care applications, in which cryopreservation has become an essential procedure to realize the production of therapeutic cells. Ice recrystallization is the major factor that affects the post-thaw viability of cells. As a typical series of biomacromolecules with ice recrystallization inhibition (IRI) activity, antifreeze proteins (AFPs) have been employed in cell cryopreservation. Meanwhile, synthesized materials with IRI activity have emerged in the name of biomimetics of AFPs to expand their availability and practicality. However, fabrication of AFPs mimetics is in a chaotic period. There remains little commonality among different AFPs mimetics, then it is difficult to set guidelines on their design. With no doubt, a comprehensive understanding on the antifreezing mechanism of AFPs in molecular level will enable us to rebuild the function of AFPs, and provide convenience to clarify the relationship between structure and function of these early stage biomimetics. In this review, we would discuss those previously reported biomimetics to summarize their structure characteristics concerning the IRI activity and attempt to develop a roadmap for guiding the design of novel AFPs mimetics.

Hyperactive Antifreeze Proteins Promote Ice Growth before Binding to It

The antifreeze mechanism of antifreeze proteins (AFPs) evolved by organisms has been widely studied. However, detailed knowledge of the synergy between AFPs and ice crystals still remains fragmentary. In the present contribution, the cooperative effect of the hyperactive insect antifreeze protein TmAFP and ice crystals on the interfacial water during the entire process of inhibiting ice growth is systematically investigated at the atomic level and compared with its low activity mutant and a nonantifreeze protein. The results indicate a significant synergy between TmAFP and ice crystals, which enables the TmAFP to promote the ice growth before adsorbing on the surfaces of the ice crystals, while the mutant and the nonantifreeze protein cannot promote the ice growth due to the lack of this synergy. When TmAFP approaches the ice surface, the interfacial water is induced by both the AFP and the ice crystals to form the anchored clathrate motif, which binds TmAFP to the ice surface, resulting in a local increase in the curvature of the ice surface, thereby inhibiting the growth of ice. In this study, three stages, namely, promotion, adsorption, and inhibition, are observed in the complete process of TmAFP inhibiting ice growth, and the synergistic mechanism between protein and ice crystals is revealed. The results are helpful for the design of antifreeze proteins and bioinspired antifreeze materials with superior performance.

A General Crosslinker Strategy to Realize Intrinsic Frozen Resistance of Hydrogels

Development and understanding of antifreezing materials are fundamentally and practically important for materials design and delivery. However, almost all of antifreezing materials are either organic/icephobic materials containing no water or hydrophilic hydrogels containing antifreezing additives. Here, a general crosslinking strategy to fabricate a family of EGINA-crosslinked double-network hydrogels with intrinsic, built-in antifreezing and mechanical properties, but without any antifreezing additives is proposed and demonstrated. The resultant hydrogels, despite large structural and compositional variations of hydrophilies, electrolytes, zwitterions, and macromolecules of polymer chains, achieved strong antifreezing and mechanical properties in different environments including solution state, gel state, and hydrogel/solid interfaces. Such general antifreezing property of EGINA-crosslinked hydrogels, regardless network compositions, is likely stemmed from their highly hydrophilic and tightly crosslinked DN structures for inducing strong water-network bindings to prevent ice crystal formation from free waters in hydrogel networks. EGINA-crosslinked hydrogels can also serve as a key component to be fabricated into smart windows with high optical transmittance and supercapacitors with excellent electrochemical stability at subzero temperatures. This work provides a simple, blueprint antifreezing design concept and a family of antifreezing hydrogels for the better understanding of the composite-structure-property relationship of antifreezing materials and the fundamentals of confined water in wet soft materials.

What can S-shaped potential profiles tell us about the mechanism of membrane potential generation?

Membrane theory attributes the generation mechanism of the membrane potential to transmembrane ion transport, while Cheng's ISE (Ion selective electrode) mechanism attributes the ISE potential generation to ion adsorption on to the ISE surface. Although the membrane potential generation mechanism is different from the ISE potential generation mechanism, both the membrane potential and the ISE potential exhibit quite similar characteristics. For instance, both become indifferent to the variation of the ion concentration in both the high and the low ion concentration environment. Our experimental and theoretical investigations suggest that such a characteristic membrane potential behavior could be explained by the ion adsorption mechanism called Ling's adsorption theory (LA theory) instead of by membrane theory. If the membrane potential generation mechanism is explained by the LA theory, then the significant similarity between the membrane potential and the ISE potential is understandable, since both the LA theory and Cheng's ISE mechanism rely on the ion adsorption process. Although the LA theory is not acknowledged as the mechanism for the membrane potential generation in the mainstream physiology community, it does not have any serious defect in principle as a membrane potential generation mechanism. Hence, it is worth investigating if the current membrane potential generation mechanism needs reevaluation in light of evidence presented here. We conclude that the LA theory is a quite plausible membrane potential generation mechanism, suggesting that it may contribute to it.

Abnormal Properties of Low-Dimensional Confined Water

Water molecules confined to low-dimensional spaces exhibit unusual properties compared to bulk water. For example, the alternating hydrophilic and hydrophobic nanodomains on flat silicon wafer can induce the abnormal spreading of water (contact angles near 0°) which is caused by the 2D capillary effect. Hence, exploring the physicochemical properties of confined water from the nanoscale is of great value for understanding the challenges in material science and promoting the applications of nanomaterials in the fields of mass transport, nanofluidic designing, and fuel cell. The knowledge framework of confined water can also help to better understand the complex functions of the hydration layer of biomolecules, and even trace the origin of life. In this review, the physical properties, abnormal behaviors, and functions of the confined water are mainly summarized through several common low-dimensional water formats in the fields of solid/air-water interface, nanochannel confinement, and biological hydration layer. These researches indicate that the unusual behaviors of the confined water depend strongly on the confinement size and the interaction between the molecules and confining surface. These diverse properties of confined water open a new door to materials science and may play an important role in the future development of biology.

Disaccharide Residues are Required for Native Antifreeze Glycoprotein Activity

Antifreeze glycoproteins (AFGPs) are able to bind to ice, halt its growth, and are the most potent inhibitors of ice recrystallization known. The structural basis for AFGP’s unique properties remains largely elusive. Here we determined the antifreeze activities of AFGP variants that we constructed by chemically modifying the hydroxyl groups of the disaccharide of natural AFGPs. Using nuclear magnetic resonance, two-dimensional infrared spectroscopy, and circular dichroism, the expected modifications were confirmed as well as their effect on AFGPs solution structure. We find that the presence of all the hydroxyls on the disaccharides is a requirement for the native AFGP hysteresis as well as the maximal inhibition of ice recrystallization. The saccharide hydroxyls are apparently as important as the acetyl group on the galactosamine, the α-linkage between the disaccharide and threonine, and the methyl groups on the threonine and alanine. We conclude that the use of hydrogen-bonding through the hydroxyl groups of the disaccharide and hydrophobic interactions through the polypeptide backbone are equally important in promoting the antifreeze activities observed in the native AFGPs. These important criteria should be considered when designing synthetic mimics.

Specific Ion-Protein Interactions Influence Bacterial Ice Nucleation

Ice nucleation‐active bacteria are the most efficient ice nucleators known, enabling the crystallization of water at temperatures close to 0 °C, thereby overcoming the kinetically hindered phase transition process at these conditions. Using highly specialized ice‐nucleating proteins (INPs), they can cause frost damage to plants and influence the formation of clouds and precipitation in the atmosphere. In nature, the bacteria are usually found in aqueous environments containing ions. The impact of ions on bacterial ice nucleation efficiency, however, has remained elusive. Here, we demonstrate that ions can profoundly influence the efficiency of bacterial ice nucleators in a manner that follows the Hofmeister series. Weakly hydrated ions inhibit bacterial ice nucleation whereas strongly hydrated ions apparently facilitate ice nucleation. Surface‐specific sum‐frequency generation spectroscopy and molecular dynamics simulations reveal that the different effects are due to specific interactions of the ions with the INPs on the surface of the bacteria. Our results demonstrate that heterogeneous ice nucleation facilitated by bacteria strongly depends upon the nature of the ions, and specific ion–protein interactions are essential for the complete description of heterogeneous ice nucleation by bacteria.

Characterization of microbial antifreeze protein with intermediate activity suggests that a bound-water network is essential for hyperactivity

Antifreeze proteins (AFPs) inhibit ice growth by adsorbing onto specific ice planes. Microbial AFPs show diverse antifreeze activity and ice plane specificity, while sharing a common molecular scaffold. To probe the molecular mechanisms responsible for AFP activity, we here characterized the antifreeze activity and crystal structure of TisAFP7 from the snow mold fungus Typhula ishikariensis. TisAFP7 exhibited intermediate activity, with the ability to bind the basal plane, compared with a hyperactive isoform TisAFP8 and a moderately active isoform TisAFP6. Analysis of the TisAFP7 crystal structure revealed a bound-water network arranged in a zigzag pattern on the surface of the protein's ice-binding site (IBS). While the three AFP isoforms shared the water network pattern, the network on TisAFP7 IBS was not extensive, which was likely related to its intermediate activity. Analysis of the TisAFP7 crystal structure also revealed the presence of additional water molecules that form a ring-like network surrounding the hydrophobic side chain of a crucial IBS phenylalanine, which might be responsible for the increased adsorption of AFP molecule onto the basal plane. Based on these observations, we propose that the extended water network and hydrophobic hydration at IBS together determine the TisAFP activity.

Ice Inhibition for Cryopreservation: Materials, Strategies, and Challenges

Cryopreservation technology has developed into a fundamental and important supporting method for biomedical applications such as cell-based therapeutics, tissue engineering, assisted reproduction, and vaccine storage. The formation, growth, and recrystallization of ice crystals are the major limitations in cell/tissue/organ cryopreservation, and cause fatal cryoinjury to cryopreserved biological samples. Flourishing anti-icing materials and strategies can effectively regulate and suppress ice crystals, thus reducing ice damage and promoting cryopreservation efficiency. This review first describes the basic ice cryodamage mechanisms in the cryopreservation process. The recent development of chemical ice-inhibition molecules, including cryoprotectant, antifreeze protein, synthetic polymer, nanomaterial, and hydrogel, and their applications in cryopreservation are summarized. The advanced engineering strategies, including trehalose delivery, cell encapsulation, and bioinspired structure design for ice inhibition, are further discussed. Furthermore, external physical field technologies used for inhibiting ice crystals in both the cooling and thawing processes are systematically reviewed. Finally, the current challenges and future perspectives in the field of ice inhibition for high-efficiency cryopreservation are proposed.

Ice-nucleating proteins are activated by low temperatures to control the structure of interfacial water

Ice-nucleation active (INA) bacteria can promote the growth of ice more effectively than any other known material. Using specialized ice-nucleating proteins (INPs), they obtain nutrients from plants by inducing frost damage and, when airborne in the atmosphere, they drive ice nucleation within clouds, which may affect global precipitation patterns. Despite their evident environmental importance, the molecular mechanisms behind INP-induced freezing have remained largely elusive. We investigate the structural basis for the interactions between water and the ice-nucleating protein InaZ from the INA bacterium Pseudomonas syringae. Using vibrational sum-frequency generation (SFG) and two-dimensional infrared spectroscopy, we demonstrate that the ice-active repeats of InaZ adopt a β-helical structure in solution and at water surfaces. In this configuration, interaction between INPs and water molecules imposes structural ordering on the adjacent water network. The observed order of water increases as the interface is cooled to temperatures close to the melting point of water. Experimental SFG data combined with molecular-dynamics simulations and spectral calculations show that InaZ reorients at lower temperatures. This reorientation can enhance water interactions, and thereby the effectiveness of ice nucleation.

Ice-nucleating proteins promote ice formation at high sub-zero temperatures, but the mechanism is still unclear. The authors investigate a model ice-nucleating protein at the air-water interface using vibrational sum frequency generation spectroscopy and simulations, revealing its reorientation at low temperatures, which increases contact with water molecules and promotes their ordering.

Antifreeze proteins and homogeneous nucleation: On the physical determinants impeding ice crystal growth

Antifreeze proteins (AFPs) are biopolymers capable of interfering with ice growth. Their antifreeze action is commonly understood considering that the AFPs, by pinning the ice surface, force the crystal-liquid interface to bend forming an ice meniscus, causing an increase in the surface free energy and resulting in a decrease in the freezing point ΔT^max. Here, we present an extensive computational study for a model protein adsorbed on a TIP4P/Ice crystal, computing ΔT^max as a function of the average distance d between AFPs, with simulations spanning over 1 µs. First, we show that the lower the d, the larger the ΔT^max. Then, we find that the water-ice-protein contact angle along the line ΔT^max(d) is always larger than 0°, and we provide a theoretical interpretation. We compute the curvature radius of the stable solid-liquid interface at a given supercooling ΔT ≤ ΔT^max, connecting it with the critical ice nucleus at ΔT. Finally, we discuss the antifreeze capability of AFPs in terms of the protein-water and protein-ice interactions. Our findings establish a unified description of the AFPs in the contest of homogeneous ice nucleation, elucidating key aspects of the antifreeze mechanisms and paving the way for the design of novel ice-controlling materials.

An introduction to cryo-FIB-SEM cross-sectioning of frozen, hydrated Life Science samples

The introduction of cryo‐techniques to the focused ion‐beam scanning electron microscope (FIB‐SEM) has brought new opportunities to study frozen, hydrated samples from the field of Life Sciences. Cryo‐techniques have long been employed in electron microscopy. Thin electron transparent sections are produced by cryo‐ultramicrotomy for observation in a cryo‐transmission electron microscope (TEM). Cryo‐TEM is presently reaching the imaging of macromolecular structures. In parallel, cryo‐fractured surfaces from bulk materials have been investigated by cryo‐SEM.

Both cryo‐TEM and cryo‐SEM have provided a wealth of information, despite being 2D techniques. Cryo‐TEM tomography does provide 3D information, but the thickness of the volume has a maximum of 200–300 nm, which limits the 3D information within the context of specific structures. FIB‐milling enables imaging additional planes by creating cross‐sections (e.g. cross‐sectioning or site‐specific X‐sectioning) perpendicular to the cryo‐fracture surface, thus adding a third imaging dimension to the cryo‐SEM. This paper discusses how to produce suitable cryo‐FIB‐SEM cross‐section results from frozen, hydrated Life Science samples with emphasis on ‘common knowledge’ and reoccurring observations.

Lay Description

Life Sciences studies life down to the smallest details. Visualising the smallest details requires electron microscopy, which utilises high‐vacuum chambers. One method to maintain the integrity of Life Sciences samples under vacuum conditions is freezing. Frozen samples can remain in a suspended state. As a result, research can be carried out without having to change the chemistry or internal physical structure of the samples.

Two types of electron microscopes equipped with cryo‐sample handling facilities are used to investigate samples: The scanning electron microscope (SEM) which investigates surfaces and the transmission electron microscope (TEM) which investigates thin electron transparent sections (called lamellae). A third method of investigation combines a SEM with a focused ion beam (FIB) to form a cryo‐FIB‐SEM, which is the basis of this paper. The electron beam images the cryo‐sample surface while the ion beam mills into the surface to expose the interior of the sample. The latter is called cross‐sectioning and the result provides a way of investigating the 3rd dimension of the sample. This paper looks at the making of cross‐sections in this manner originating from knowledge and experience gained with this technique over many years. This information is meant for newcomers, and experienced researchers in cryo‐microscopy alike.

Icelike Vibrational Properties of Strong Hydrogen Bonds in Hydrated Lithium Nitrate

The hydrogen bond network accounts for many of the extraordinary physical properties of liquid water and ice. Its vibrational dynamics are quite complex in their entirety but can be accessed in detail by investigating small groups of only a few water molecules. Here, aqueous salt hydrates turned out to be an exceptional model system for water molecules arranged in well-defined geometrical structures that can be accessed by means of femtosecond spectroscopy of the OH stretching vibration. In this study, we find striking resemblance between the vibrational properties of three water molecules connected via strong hydrogen bonds in the trihydrate of LiNO₃ and those of ordinary ice I_h. As in ice, the vibrations of the hydrate water molecules show ultrafast excited state dynamics that are strongly accelerated when proceeding from deuterated to neat H₂O samples. The latter is analyzed by means of an additional relaxation channel that is due to Fermi resonance between the OH stretching vibration and the bend overtone accompanied by delocalization of the vibration over neighboring water molecules in the H₂O species. Moreover, in the hydrate and ice samples severe spectral broadening is examined when comparing fundamental and excited state absorption bands. Here, proton delocalization along the strong hydrogen bonds is given as a possible underlying mechanism.

Modelling of short synthetic antifreeze peptides: Insights into ice-pinning mechanism

Organisms living in icy environments produce antifreeze proteins to control ice growth and recrystallization. It has been proposed that these molecules pin the surface of ice crystals, thus inducing the formation of a curved surface that arrests crystal growth. Such proteins are very appealing for many potential applications in food industry, material science and cryoconservation of organs and tissues. Unfortunately, their structural complexity has seriously hampered their practical use, while efficient and accessible synthetic analogues are highly desirable. In this paper, we used molecular dynamics based techniques to model the interaction of three short antifreeze synthetic peptides with an ice surface. The employed protocols succeeded in reproducing the ice pinning action of antifreeze peptides and the consequent ice growth arrest, as well as in distinguishing between antifreeze and control peptides, for which no such effect was observed. Principal components analysis of peptides trajectories in different simulation settings permitted to highlight the main structural features associated to antifreeze activity. Modeling results are highly correlated with experimentally measured properties, and insights on ice-peptide interactions and on conformational patterns favoring antifreeze activity will prompt the design of new and improved antifreeze peptides.

Inhibition of Bacterial Ice Nucleators Is Not an Intrinsic Property of Antifreeze Proteins

Cold-adapted organisms use antifreeze proteins (AFPs) or ice-nucleating proteins (INPs) for the survival in freezing habitats. AFPs have been reported to be able to inhibit the activity of INPs, a property that would be of great physiological relevance. The generality of this effect is not understood, and for the few known examples of INP inhibition by AFPs, the molecular mechanisms remain unclear. Here, we report a comprehensive evaluation of the effects of five different AFPs on the activity of bacterial ice nucleators using a high-throughput ice nucleation assay. We find that bacterial INPs are inhibited by certain AFPs, while others show no effect. Thus, the ability to inhibit the activity of INPs is not an intrinsic property of AFPs, and the interactions of INPs and different AFPs proceed through protein-specific rather than universal molecular mechanisms.

Deciphering the Role of the Non-ice-binding Surface in the Antifreeze Activity of Hyperactive Antifreeze Proteins

Antifreeze proteins (AFPs) show thermal hysteresis through specific interaction with the ice crystal. Hyperactive AFPs interact with the ice surface through a threonine-rich motif present at their ice-binding surface (IBS). Ordering of water around the IBS was extensively investigated. However, the role of non-IBS in ice growth inhibition is yet to be understood completely. The present study explores the nature of hydration and its length-scale evaluation around the non-IBS for hyperactive AFPs. We observed that the hydration layer of non-IBS is liquid-like, even in highly supercooled conditions, and the nature of hydration is drastically different from the hydration pattern of non-AFP surfaces. In similar conditions, the hydration layer around the IBS is ice-like ordered. Non-IBS of the hyperactive AFP exposes toward the bulk and is able to maintain the liquid-like character of its hydration water up to 15 Å. We also find that the amino acid compositions and their spatial distribution on the non-IBS are markedly different from those of the IBS and non-AFP surfaces. These results elucidate the combined role of IBS and non-IBS in ice-growth inhibition. While IBS is required to adsorb on ice efficiently, the exposed non-IBS may prevent ice nucleation/growth on top of the bound AFPs.

Freezing from the inside: Ice nucleation in Escherichia coli and Escherichia coli ghosts by inner membrane bound ice nucleation protein InaZ

Ice nucleation (IN) active bacteria such as Pseudomonas syringae promote the growth of ice crystals more effectively than any material known. Using the specialized ice nucleation protein (INP) InaZ, P. syringae-the well studied epiphytic plant pathogen-attacks plants by frost damage and, likewise fascinating, drives ice nucleation within clouds when airborne in the atmosphere by linkage to the Earth's water cycle. While ice nucleation proteins play a tremendous role for life on the planet, the molecular details of their activity on the bacterial membrane surface are largely unknown. Bacterial ghosts (BGs) derived from Escherichia coli can be used as simplified model systems to study the mode of action of InaZ. In this work, the authors used BGs to study the role of InaZ localization on the luminal side of the bacterial inner membrane. Naturally, P. syringae INPs are displayed on the surface of the outer membrane; so in contrast, the authors engineered an N-terminal truncated form of inaZ lacking the transport sequence for anchoring of InaZ on the outer membrane. This construct was fused to N- and C-terminal inner membrane anchors and expressed in Escherichia coli C41. The IN activity of the corresponding living recombinant E. coli catalyzing interfacial ice formation of supercooled water at high subzero temperatures was tested by a droplet-freezing assay and surface spectroscopy. The median freezing temperature (T₅₀) of the parental living E. coli C41 cells without INP was detected at -20.1 °C and with inner membrane anchored INPs at a T₅₀ value between -7 and -9 °C, demonstrating that the induction of IN from the inside of the bacterium by inner membrane anchored INPs facing the luminal inner membrane side is very similar to IN induced by bacterial INPs located at the outer membrane. Bacterial ghosts derived from these different constructs showed first droplet freezing values between -6 and -8 °C, whereas E. coli C41 BGs alone without carrying inner membrane anchored INPs exhibit a T₅₀ of -18.9 °C. Sum frequency generation spectroscopy showed structural ordered water at the BG/water interface, which increased close to the water melting point. Together, this indicates that the more efficient IN of INP-BGs compared to their living parental strains can be explained by the free access of inner membrane anchored INP constructs to ultrapure water filling the inner space of the BGs.

Decoding the molecular water structure at complex interfaces through surface-specific spectroscopy of the water bending mode

The structure of interfacial water determines atmospheric chemistry, wetting properties of materials, and protein folding. The challenge of investigating the properties of specific interfacial water molecules has frequently been confronted using surface-specific sum-frequency generation (SFG) vibrational spectroscopy using the O-H stretch mode. While perfectly suited for the water-air interface, for complex interfaces, a potential complication arises from the contribution of hydroxyl or amine groups of non-water species present at the surface, such as surface hydroxyls on minerals, or O-H and N-H groups contained in proteins. Here, we present a protocol to extract the hydrogen bond strength selectively of interfacial water, through the water bending mode. The bending mode vibrational frequency distribution provides a new avenue for unveiling the hydrogen bonding structure of interfacial water at complex aqueous interfaces. We demonstrate this method for the water-CaF₂ and water-protein interfaces. For the former, we show that this method can indeed single out water O-H groups from surface hydroxyls, and that with increasing pH, the hydrogen-bonded network of interfacial water strengthens. Furthermore, we unveil enhanced hydrogen bonding of water, compared to bulk water, at the interface with human serum albumin proteins, a prototypical bio-interface.

Electrostatic Interactions Control the Functionality of Bacterial Ice Nucleators

Bacterial ice-nucleating proteins (INPs) promote heterogeneous ice nucleation more efficiently than any other material. The details of their working mechanism remain elusive, but their high activity has been shown to involve the formation of functional INP aggregates. Here we reveal the importance of electrostatic interactions for the activity of INPs from the bacterium Pseudomonas syringae by combining a high-throughput ice nucleation assay with surface-specific sum-frequency generation spectroscopy. We determined the charge state of nonviable P. syringae as a function of pH by monitoring the degree of alignment of the interfacial water molecules and the corresponding ice nucleation activity. The net charge correlates with the ice nucleation activity of the INP aggregates, which is minimal at the isoelectric point. In contrast, the activity of INP monomers is less affected by pH changes. We conclude that electrostatic interactions play an essential role in the formation of the highly efficient functionally aligned INP aggregates, providing a mechanism for promoting aggregation under conditions of stress that prompt the bacteria to nucleate ice.