Ultrastructure of Shewanella oneidensis MR-1 nanowires revealed by electron cryotomography

Revisiting Solar Energy Flow in Nanomaterial-Microorganism Hybrid Systems

Nanomaterial-microorganism hybrid systems (NMHSs), integrating semiconductor nanomaterials with microorganisms, present a promising platform for broadband solar energy harvesting, high-efficiency carbon reduction, and sustainable chemical production. While studies underscore its potential in diverse solar-to-chemical energy conversions, prevailing NMHSs grapple with suboptimal energy conversion efficiency. Such limitations stem predominantly from an insufficient systematic exploration of the mechanisms dictating solar energy flow. This review provides a systematic overview of the notable advancements in this nascent field, with a particular focus on the discussion of three pivotal steps of energy flow: solar energy capture, cross-membrane energy transport, and energy conversion into chemicals. While key challenges faced in each stage are independently identified and discussed, viable solutions are correspondingly postulated. In view of the interplay of the three steps in affecting the overall efficiency of solar-to-chemical energy conversion, subsequent discussions thus take an integrative and systematic viewpoint to comprehend, analyze and improve the solar energy flow in the current NMHSs of different configurations, and highlighting the contemporary techniques that can be employed to investigate various aspects of energy flow within NMHSs. Finally, a concluding section summarizes opportunities for future research, providing a roadmap for the continued development and optimization of NMHSs.

Elucidating the development of cooperative anode-biofilm-structures

Microbial electrochemical systems are a highly versatile platform technology with a particular focus on the interplay of chemical and electrical energy conversion and offer immense potential for a sustainable bioeconomy. The industrial realization of this potential requires a critical focus on biofilm optimization if performance is to be controlled over a long period of time. Moreover, the aspect and influence of cooperativity has to be addressed as many applied anodic bioelectrochemical systems will most likely be operated with a diversity of interacting microbial species. Hence, the aim of this study was to analyze how interspecies dependence and cooperativity of a model community influence the development of anodic biofilms. To investigate biofilm activity in a spatially resolved manner, a microfluidic bioelectrochemical flow cell was developed that can be equipped with user-defined electrode materials and operates under laminar flow conditions. With this infrastructure, the development of single and co-culture biofilms of the two model organisms Shewanella oneidensis and Geobacter sulfurreducens on graphite electrodes was monitored by optical coherence tomography analysis. The interdependence in the co-culture biofilm was achieved by feeding the community with lactate, which is converted by S. oneidensis into acetate, which in turn serves as substrate for G. sulfurreducens. The results show that co-cultivation resulted in the formation of denser biofilms than in single culture. Moreover, we hypothesize that S. oneidensis in return utilizes the conductive biofilm matrix build by G. sulfurreducens for direct interspecies electron transfer (DIET) to the anode. FISH analysis revealed that the biofilms consisted of approximately two-thirds G. sulfurreducens cells, which most likely formed a conductive 3D network throughout the biofilm matrix, in which evenly distributed tubular S. oneidensis colonies were embedded without direct contact to the anode surface. Live/dead staining shows that the outermost biofilm contained almost exclusively dead cells (98 %), layers near the anode contained 45-56 % and the entire biofilm contained 82 % live cells. Our results exemplify how the architecture of the exoelectrogenic biofilm dynamically adapts to the respective process conditions.

A genetic engineering strategy to enhance outer membrane vesicle-mediated extracellular electron transfer of Geobacter sulfurreducens

Bioelectrochemical systems (BESs) are unique devices that harness the metabolic activity of electroactive microorganisms (EAMs) to convert chemical energy stored in organic substrates into electrical energy. Enhancing electron transfer efficiency between EAMs and electrodes is the key to practical implementation of BESs. Considering the role of outer membrane vesicles (OMVs) in mediating electron transfer of EAMs, a genetic engineering strategy to achieve OMVs overproduction was explored to enhance electron transfer efficiency and the underlying mechanisms were investigated. This study constructed a mutant strain of Geobacter sulfurreducens that lacked the ompA gene encoding an outer membrane protein. Experimental results showed that the mutant strain produced more OMVs and possessed higher electron transfer efficiency in Fe(III) reduction, dye degradation and current generation in BESs than the wild-type strain. More cargoes such as c-type cytochromes, functional proteins, eDNA, polysaccharides and signaling molecules that might be favorable for electron transfer and biofilm formation were found in OMVs produced by ompA-deficient anodic biofilm, which possibly contributed to the improved electron transfer efficiency of ompA-deficient biofilm. The results indicate that overproduction of OMVs in EAMs might be a potential strategy to enhance BESs performance.

Multi-wavelength Raman microscopy of nickel-based electron transport in cable bacteria

Cable bacteria embed a network of conductive protein fibers in their cell envelope that efficiently guides electron transport over distances spanning up to several centimeters. This form of long-distance electron transport is unique in biology and is mediated by a metalloprotein with a sulfur-coordinated nickel (Ni) cofactor. However, the molecular structure of this cofactor remains presently unknown. Here, we applied multi-wavelength Raman microscopy to identify cell compounds linked to the unique cable bacterium physiology, combined with stable isotope labeling, and orientation-dependent and ultralow-frequency Raman microscopy to gain insight into the structure and organization of this novel Ni-cofactor. Raman spectra of native cable bacterium filaments reveal vibrational modes originating from cytochromes, polyphosphate granules, proteins, as well as the Ni-cofactor. After selective extraction of the conductive fiber network from the cell envelope, the Raman spectrum becomes simpler, and primarily retains vibrational modes associated with the Ni-cofactor. These Ni-cofactor modes exhibit intense Raman scattering as well as a strong orientation-dependent response. The signal intensity is particularly elevated when the polarization of incident laser light is parallel to the direction of the conductive fibers. This orientation dependence allows to selectively identify the modes that are associated with the Ni-cofactor. We identified 13 such modes, some of which display strong Raman signals across the entire range of applied wavelengths (405-1,064 nm). Assignment of vibrational modes, supported by stable isotope labeling, suggest that the structure of the Ni-cofactor shares a resemblance with that of nickel bis(1,2-dithiolene) complexes. Overall, our results indicate that cable bacteria have evolved a unique cofactor structure that does not resemble any of the known Ni-cofactors in biology.

A comprehensive review of microbial fuel cells considering materials, methods, structures, and microorganisms

Microbial fuel cells (MFCs) are promising for generating renewable energy from organic matter and efficient wastewater treatment. Ensuring their practical viability requires meticulous optimization and precise design. Among the critical components of MFCs, the membrane separator plays a pivotal role in segregating the anode and cathode chambers. Recent investigations have shed light on the potential benefits of membrane-less MFCs in enhancing power generation. However, it is crucial to recognize that such configurations can adversely impact the electrocatalytic activity of anode microorganisms due to increased substrate and oxygen penetration, leading to decreased coulombic efficiency. Therefore, when selecting a membrane for MFCs, it is essential to consider key factors such as internal resistance, substrate loss, biofouling, and oxygen diffusion. Addressing these considerations carefully allows researchers to advance the performance and efficiency of MFCs, facilitating their practical application in sustainable energy production and wastewater treatment. Accelerated substrate penetration could also lead to cathode clogging and bacterial inactivation, reducing the MFC's efficiency. Overall, the design and optimization of MFCs, including the selection and use of membranes, are vital for their practical application in renewable energy generation and wastewater treatment. Further research is necessary to overcome the challenges of MFCs without a membrane and to develop improved membrane materials for MFCs. This review article aims to compile comprehensive information about all constituents of the microbial fuel cell, providing practical insights for researchers examining various variables in microbial fuel cell research.

Single-molecule electrochemical imaging resolves the midpoint potentials of individual fluorophores on nanoporous antimony-doped tin oxide

We report reversible switching of oxazine, cyanine, and rhodamine dyes by a nanoporous antimony-doped tin oxide electrode that enables single-molecule (SM) imaging of electrochemical activity. Since the emissive state of each fluorophore is modulated by electrochemical potential, the number of emitting single molecules follows a sigmoid function during a potential scan, and we thus optically determine the formal redox potential of each dye. We find that the presence of redox mediators (phenazine methosulfate and riboflavin) functions as an electrochemical switch on each dye's emissive state and observe significantly altered electrochemical potential and kinetics. We are therefore able to measure optically how redox mediators and the solid-state electrode modulate the redox state of fluorescent molecules, which follows an electrocatalytic (EC') mechanism, with SM sensitivity over a 900 μm2 field of view. Our observations indicate that redox mediator-assisted SM electrochemical imaging (SMEC) could be potentially used to sense any electroactive species. Combined with SM blinking and localization microscopy, SMEC imaging promises to resolve the nanoscale spatial distributions of redox species and their redox states, as well as the electron transfer kinetics of electroactive species in various bioelectrochemical processes.

Recent Developments and Applications of Microbial Electrochemical Biosensors

This chapter provides a comprehensive overview of microbial electrochemical biosensors, which are a unique class of biosensors that utilize the metabolic activity of microorganisms to convert chemical signals into electrical signals. The principles and mechanisms of these biosensors are discussed, including the different types of microorganisms that can be used. The various applications of microbial electrochemical biosensors in fields such as environmental monitoring, medical diagnostics, and food safety are also explored. The chapter concludes with a discussion of future research directions and potential advancements in the field of microbial electrochemical biosensors.

Handling Difficult Cryo-ET Samples: A Study with Primary Neurons from Drosophila melanogaster

Cellular neurobiology has benefited from recent advances in the field of cryo-electron tomography (cryo-ET). Numerous structural and ultrastructural insights have been obtained from plunge-frozen primary neurons cultured on electron microscopy grids. With most primary neurons having been derived from rodent sources, we sought to expand the breadth of sample availability by using primary neurons derived from 3rd instar Drosophila melanogaster larval brains. Ultrastructural abnormalities were encountered while establishing this model system for cryo-ET, which were exemplified by excessive membrane blebbing and cellular fragmentation. To optimize neuronal samples, we integrated substrate selection, micropatterning, montage data collection, and chemical fixation. Efforts to address difficulties in establishing Drosophila neurons for future cryo-ET studies in cellular neurobiology also provided insights that future practitioners can use when attempting to establish other cell-based model systems.

Electron Transfer Mechanism at the Interface of Multi-Heme Cytochromes and Metal Oxide

Electroactive microbial cells have evolved unique extracellular electron transfer to conduct the reactions via redox outer-membrane (OM) proteins. However, the electron transfer mechanism at the interface of OM proteins and nanomaterial remains unclear. In this study, the mechanism for the electron transfer at biological/inorganic interface is investigated by integrating molecular modeling with electrochemical and spectroscopic measurements. For this purpose, a model system composed of OmcA, a typical OM protein, and the hexagonal tungsten trioxide (h-WO3 ) with good biocompatibility is selected. The interfacial electron transfer is dependent mainly on the special molecular configuration of OmcA and the microenvironment of the solvent exposed active center. Also, the apparent electron transfer rate can be tuned by site-directed mutagenesis at the axial ligand of the active center. Furthermore, the equilibrium state of the OmcA/h-WO3 systems suggests that their attachment is attributed to the limited number of residues. The electrochemical analysis of OmcA and its variants reveals that the wild type exhibits the fastest electron transfer rate, and the transient absorption spectroscopy further shows that the axial histidine plays an important role in the interfacial electron transfer process. This study provides a useful approach to promote the site-directed mutagenesis and nanomaterial design for bioelectrocatalytic applications.

Electron Transfer Beyond the Outer Membrane: Putting Electrons to Rest

Extracellular electron transfer (EET) is the physiological process that enables the reduction or oxidation of molecules and minerals beyond the surface of a microbial cell. The first bacteria characterized with this capability were Shewanella and Geobacter, both reported to couple their growth to the reduction of iron or manganese oxide minerals located extracellularly. A key difference between EET and nearly every other respiratory activity on Earth is the need to transfer electrons beyond the cell membrane. The past decade has resolved how well-conserved strategies conduct electrons from the inner membrane to the outer surface. However, recent data suggest a much wider and less well understood collection of mechanisms enabling electron transfer to distant acceptors. This review reflects the current state of knowledge from Shewanella and Geobacter, specifically focusing on transfer across the outer membrane and beyond-an activity that enables reduction of highly variable minerals, electrodes, and even other organisms.

Sub-MIC antibiotics affect microbial ferrihydrite reduction by extracellular membrane vesicles

Environmental concentrations of antibiotics, usually below MIC, have significant biological effects on bacterial cells. Sub-MIC antibiotics exposure induces bacteria to produce outer membrane vesicles (OMVs). Recently, OMVs is discovered as a novel pathway for dissimilatory iron reducing bacteria (DIRB) to mediate extracellular electron transfer (EET). Whether and how the antibiotic-induced OMVs modulate iron oxides reduction by DIRB have not been studied. This study showed the sub-MIC antibiotics (ampicillin or ciprofloxacin) increased OMVs secretion in Geobacter sulfurreducens, and the antibiotic-induced OMVs contained more redox active cytochromes facilitating iron oxides reduction, especially for the ciprofloxacin-induced OMVs. Deduced from a combination of electron microscopy and proteomic analysis, the influence of ciprofloxacin on SOS response triggered prophage induction and led to the formation of outer-inner membrane vesicles (OIMVs) in, which was a first report in Geobacter species. While ampicillin disrupting cell membrane integrity resulted in more formation of classic OMVs from outer membrane blebbing. The results indicated that the different structure and composition of vesicles were responsible for the antibiotic-dependent regulation on iron oxides reduction. This newly identified regulation on EET-mediated redox reactions by sub-MIC antibiotics expands our knowledge about the impact of antibiotics on microbial processes or "non-target" organisms.

Handling difficult cryo-ET samples: A study with primary neurons from Drosophila melanogaster

Cellular neurobiology has benefited from recent advances in the field of cryo-electron tomography (cryo-ET). Numerous structural and ultrastructural insights have been obtained from plunge-frozen primary neurons cultured on electron microscopy grids. With most primary neurons been derived from rodent sources, we sought to expand the breadth of sample availability by using primary neurons derived from 3rd instar Drosophila melanogaster larval brains. Ultrastructural abnormalities were encountered while establishing this model system for cryo-ET, which were exemplified by excessive membrane blebbing and cellular fragmentation. To optimize neuronal samples, we integrated substrate selection, micropatterning, montage data collection, and chemical fixation. Efforts to address difficulties in establishing Drosophila neurons for future cryo-ET studies in cellular neurobiology also provided insights that future practitioners can use when attempting to establish other cell-based model systems.

Engineering Outer Membrane Vesicles to Increase Extracellular Electron Transfer of Shewanella oneidensis

Outer membrane vesicles (OMVs) of Gram-negative bacteria play an essential role in cellular physiology. The underlying regulatory mechanism of OMV formation and its impact on extracellular electron transfer (EET) in the model exoelectrogenShewanella oneidensis MR-1 remain unclear and have not been reported. To explore the regulatory mechanism of OMV formation, we used the CRISPR-dCas9 gene repression technology to reduce the crosslink between the peptidoglycan (PG) layer and the outer membrane, thus promoting the OMV formation. We screened the target genes that were potentially beneficial to the outer membrane bulge, which were classified into two modules: PG integrity module (Module 1) and outer membrane component module (Module 2). We found that downregulation of the penicillin-binding protein-encoding gene pbpC for peptidoglycan integrity (Module 1) and the N-acetyl-d-mannosamine dehydrogenase-encoding gene wbpP involved in lipopolysaccharide synthesis (Module 2) exhibited the highest production of OMVs and enabled the highest output power density of 331.3 ± 1.2 and 363.8 ± 9.9 mW m-2, 6.33- and 6.96-fold higher than that of the wild-typeS. oneidensis MR-1 (52.3 ± 0.6 mW m-2), respectively. To elucidate the specific impacts of OMV formation on EET, OMVs were isolated and quantified for UV-visible spectroscopy and heme staining characterization. Our study showed that abundant outer membrane c-type cytochromes (c-Cyts) including MtrC and OmcA and periplasmic c-Cyts were exposed on the surface or inside of OMVs, which were the vital constituents responsible for EET. Meanwhile, we found that the overproduction of OMVs could facilitate biofilm formation and increase biofilm conductivity. To the best of our knowledge, this study is the first to explore the mechanism of OMV formation and its correlation with EET of S. oneidensis, which paves the way for further study of OMV-mediated EET.

Mechanism of Reduction of Aqueous U(V)-dpaea and Solid-Phase U(VI)-dpaea Complexes: The Role of Multiheme c-Type Cytochromes

The biological reduction of soluble U(VI) complexes to form immobile U(IV) species has been proposed to remediate contaminated sites. It is well established that multiheme c-type cytochromes (MHCs) are key mediators of electron transfer to aqueous phase U(VI) complexes for bacteria such as Shewanella oneidensis MR-1. Recent studies have confirmed that the reduction proceeds via a first electron transfer forming pentavalent U(V) species that readily disproportionate. However, in the presence of the stabilizing aminocarboxylate ligand, dpaea^2- (dpaeaH₂═bis(pyridyl-6-methyl-2-carboxylate)-ethylamine), biologically produced U(V) persisted in aqueous solution at pH 7. We aim to pinpoint the role of MHC in the reduction of U(V)-dpaea and to establish the mechanism of solid-phase U(VI)-dpaea reduction. To that end, we investigated U-dpaea reduction by two deletion mutants of S. oneidensis MR-1-one lacking outer membrane MHCs and the other lacking all outer membrane MHCs and a transmembrane MHC-and by the purified outer membrane MHC, MtrC. Our results suggest that solid-phase U(VI)-dpaea is reduced primarily by outer membrane MHCs. Additionally, MtrC can directly transfer electrons to U(V)-dpaea to form U(IV) species but is not strictly necessary, underscoring the primary involvement of outer membrane MHCs in the reduction of this pentavalent U species but not excluding that of periplasmic MHCs.

Mechano-control of Extracellular Electron Transport Rate via Modification of Inter-heme Coupling in Bacterial Surface Cytochrome

Bacterial outer-membrane multi-heme cytochromes (OMCs) mediate extracellular electron transport (EET). While heme alignment dictates the rate of EET, control of inter-heme coupling in a single OMC remains challenging, especially in intact cells. Given that OMCs diffuse and collide without aggregation on the cell surface, the overexpression of OMCs could increase such mechanical stress to impact the OMCs' protein structure. Here, the heme coupling is modified via mechanical interactions among OMCs by controlling their concentrations. Employment of whole-cell circular dichroism (CD) spectra of genetically engineered Escherichia coli reveals that the OMC concentration significantly impacts the molar CD and redox property of OMCs, resulting in a 4-fold change of microbial current production. The overexpression of OMCs increased the conductive current across the biofilm on an interdigitated electrode, indicating that a higher concentration of OMCs causes more lateral inter-protein electron hopping via collision on the cell surface. The present study would open a novel strategy to increase microbial current production by mechanically enhancing the inter-heme coupling.

Interactions among microorganisms functionally active for electron transfer and pollutant degradation in natural environments

Compared to single microbial strains, complex interactions between microbial consortia composed of various microorganisms have been shown to be effective in expanding ecological functions and accomplishing biological processes. Electroactive microorganisms (EMs) and degradable microorganisms (DMs) play vital roles in bioenergy production and the degradation of organic pollutants hazardous to human health. These microorganisms can strongly interact with other microorganisms and promote metabolic cooperation, thus facilitating electricity production and pollutant degradation. In this review, we describe several specific types of EMs and DMs based on their ability to adapt to different environments, and summarize the mechanism of EMs in extracellular electron transfer. The effects of interactions between EMs and DMs are evaluated in terms of electricity production and degradation efficiency. The principle of the enhancement in microbial consortia is also introduced, such as improved biomass, changed degradation pathways, and biocatalytic potentials, which are directly or indirectly conducive to human health.

Living electronics: A catalogue of engineered living electronic components

Biology leverages a range of electrical phenomena to extract and store energy, control molecular reactions and enable multicellular communication. Microbes, in particular, have evolved genetically encoded machinery enabling them to utilize the abundant redox-active molecules and minerals available on Earth, which in turn drive global-scale biogeochemical cycles. Recently, the microbial machinery enabling these redox reactions have been leveraged for interfacing cells and biomolecules with electrical circuits for biotechnological applications. Synthetic biology is allowing for the use of these machinery as components of engineered living materials with tuneable electrical properties. Herein, we review the state of such living electronic components including wires, capacitors, transistors, diodes, optoelectronic components, spin filters, sensors, logic processors, bioactuators, information storage media and methods for assembling these components into living electronic circuits.

A New Electron Shuttling Pathway Mediated by Lipophilic Phenoxazine via the Interaction with Periplasmic and Inner Membrane Proteins of Shewanella oneidensis MR-1

Although it has been established that electron mediators substantially promote extracellular electron transfer (EET), electron shuttling pathways are not fully understood. Here, a new electron shuttling pathway was found in the EET process by Shewanella oneidensis MR-1 with resazurin, a lipophilic electron mediator. With resazurin, the genes encoding outer-membrane cytochromes (mtrCBA and omcA) were downregulated. Although cytochrome deletion substantially reduced biocurrent generation to 1-12% of that of wild-type (WT) cells, the presence of resazurin restored biocurrent generation to 168 μA·cm^-2 (ΔmtrA/omcA/mtrC), nearly equivalent to that of WT cells (194 μA·cm^-2), indicating that resazurin-mediated electron transfer was not dependent on the Mtr pathway. Biocurrent generation by resazurin was much lower in ΔcymA and ΔmtrA/omcA/mtrC/fccA/cctA mutants (4 and 6 μA·cm^-2) than in WT cells, indicating a key role of FccA, CctA, and CymA in this process. The effectiveness of resazurin in EET of Mtr cytochrome mutants is also supported by cyclic voltammetry, resazurin reduction kinetics, and in situ c-type cytochrome spectroscopy results. The findings demonstrated that low molecular weight, lipophilic electron acceptors, such as phenoxazine and phenazine, may facilitate electron transfer directly from periplasmic and inner membrane proteins, thus providing new insight into the roles of exogenous electron mediators in electron shuttling in natural and engineered biogeochemical systems.

Photodriven Chemical Synthesis by Whole-Cell-Based Biohybrid Systems: From System Construction to Mechanism Study

By simulating natural photosynthesis, the desirable high-value chemical products and clean fuels can be sustainably generated with solar energy. Whole-cell-based photosensitized biohybrid system, which innovatively couples the excellent light-harvesting capacity of semiconductor materials with the efficient catalytic ability of intracellular biocatalysts, is an appealing interdisciplinary creature to realize photodriven chemical synthesis. In this review, we summarize the constructed whole-cell-based biohybrid systems in different application fields, including carbon dioxide fixation, nitrogen fixation, hydrogen production, and other chemical synthesis. Moreover, we elaborate the charge transfer mechanism studies of representative biohybrids, which can help to deepen the current understanding of the synergistic process between photosensitizers and microorganisms, and provide schemes for building novel biohybrids with less electron transfer resistance, advanced productive efficiency, and functional diversity. Further exploration in this field has the prospect of making a breakthrough on the biotic-abiotic interface that will provide opportunities for multidisciplinary research.

Label-Free Optical Imaging of the Electron Transfer in Single Live Microbial Cells

Measurement of electron transfer at the single-particle or -cell level is crucial to the in situ study of basic chemical and biological processes. However, it remains challenging to directly probe the microbial extracellular electron transfer process due to the weakness of signals and the lack of techniques. Here, we present a label-free and noninvasive imaging method that is able to measure the electron transfer in microbial cells. We measured the extracellular electron transfer processes by imaging the redox reaction of c-type outer membrane cytochromes in microbial cells using a plasmonic imaging technique, and obtained the electrochemical activity parameters (formal potential and number of electrons transferred) of multiple individual microbial cells, allowing for unveiling ample heterogeneities in electron transfer at the single-cell level. We anticipate that this method will contribute to the study of electron transfer in various biological and chemical processes.

Manganese redox cycling in immobilized bioreactors for simultaneous removal of nitrate and 17β-estradiol: Performance, mechanisms and community assembly potential

The application of bio-manganese (Mn) redox cycling for continuous removal of contaminants provides promise for addressing coexisting contaminants in groundwater, however, the feasibility of constructing Mn redox cycling system (MCS) through community assembly remains to be elucidated. In this study, Mn-reducing strain MFG10 and Mn-oxidizing strain MFQ7 synergistically removed 94.67 % of 17β-estradiol (E2) within 12 h. Analysis of potential variations in Mn oxides suggested that MCS accelerated the production of reactive oxygen species (ROS) and Mn(III), which interacted to promote E2 removal. After continuous operation of the Mn ore-based immobilized bioreactor for 270 days, the experimental group (EG) achieved average removal efficiencies of 89.63 % and 97.57 % for NO₃^--N and E2, respectively. High-throughput sequencing results revealed complex symbiotic relationships in EG. Community assembly significantly enhanced the metabolic and physiological activity of the bioreactor, which promoting the expression of core functions including nitrogen metabolism, Mn cycling and organic matter resistance.

Accelerating denitrification and mitigating nitrite accumulation by multiple electron transfer pathways between Shewanella oneidensis MR-1 and denitrifying microbial community

The bio-denitrification was usually retarded by the unbalance of electron generation and consumption. In this study, mixing S. oneidensis MR-1 with denitrifying microbial community increased the nitrogen removal rate by 74.74 % via the interspecies electron transfer (IET), and reduced the accumulated nitrite from 9.90 ± 0.81 to 0.02 ± 0.03 mg/L. Enhanced denitrification still appeared but relatively decreased, when S. oneidensis MR-1 was separated by a dialysis bag (MW < 3000), indicating mediated interspecies electron transfer (MIET) counted in IET. The results of electron transfer activity and sludge conductivity suggested DIET and MIET jointly transfer electrons from MR-1 to electroactive denitrifying bacteria (EDB), improving denitrifying reductase activities. Electron distribution among denitrifying reductases was found to be associated with the IET rate. Microbial insights showed the total abundance of EDB was increased, and denitrifying genes were correspondingly enriched. Pseudomonas was found to cooperate with exoelectrogens in a complicated microbial community.

Plasmonic Probing Single-Cell Bio-Current Waves with a Shrinking Magnetite Nanoprobe

Probing of the single-cell level extracellular electron transfer highlights the maximum output current for microbial fuel cells (MFCs) at hundreds of femtoampere per cell, which is difficult to achieve by existing devices. Past studies focus on the external factors for boosting charge-extraction efficiency from bacteria. Here, we elucidate the intracellular factors that determine this output limit by monitoring the respiratory-driven shrinking kinetics of a single magnetite nanoprobe immobilized on a single Shewanella oneidensis MR-1 cell with plasmonic imaging. Quantified dissolving of nanoprobes unveils a previously undescribed bio-current fluctuation between 0 and 2.7 fA on a ∼40 min cycle. Simultaneously tracing of endogenous oscillations indicates that the bio-current waves are correlated with the periodic cellular electrokinesis. The unsynchronized electron transfer capability in the cell population results in the mean current of 0.24 fA per cell, significantly smaller than in single cells. It explains why the averaged output current of MFCs cannot reach the measured single-cell currents. This work offers a different perspective to improve the power output by extending the active episodes of the bio-current waves.

Outer Membrane Vesicles: Biogenesis, Functions, and Issues

This review focuses on nonlytic outer membrane vesicles (OMVs), a subtype of bacterial extracellular vesicles (BEVs) produced by Gram-negative organisms focusing on the mechanisms of their biogenesis, cargo, and function. Throughout, we highlight issues concerning the characterization of OMVs and distinguishing them from other types of BEVs. We also highlight the shortcomings of commonly used methodologies for the study of BEVs that impact the interpretation of their functionality and suggest solutions to standardize protocols for OMV studies.

Geobacter sulfurreducens' Unique Metabolism Results in Cells with a High Iron and Lipid Content

Geobacter sulfurreducens is a ubiquitous iron-reducing bacterium in soils, and in engineered systems, it can respire an electrode to produce measurable electric current. Its unique metabolism, heavily dependent on an extensive network of cytochromes, requires a unique cell composition. In this work, we used metallomics, cell fraction and elemental analyses, and transcriptomics to study and analyze the cell composition of G. sulfurreducens. Elemental composition studies (C, H, O, N, and ash content) showed high C:O and H:O ratios of approximately 1.7:1 and 0.25:1, indicative of more reduced cell composition that is consistent with high lipid content. Our study shows that G. sulfurreducens cells have a large amount of iron (2 ± 0.2 μg/g dry weight) and lipids (32 ± 0.5% dry weight/dry weight) and that this composition does not change whether the cells are grown with a soluble or an insoluble electron acceptor. The high iron concentration, higher than similar microorganisms, is attributed to the production of cytochromes that are abundant in transcriptomic analyses in both solid and soluble electron acceptor growth. The unique cell composition of G. sulfurreducens must be considered when growing this microorganism for lab studies and commercial applications. IMPORTANCE Geobacter sulfurreducens is an electroactive microorganism. In nature, it grows on metallic minerals by transferring electrons to them, effectively "breathing" metals. In a manmade system, it respires an electrode to produce an electric current. It has become a model organism for the study of electroactive organisms. There are potential biotechnological applications of an organism that can bridge the gap between biology and electrical signal and, as a ubiquitous iron reducer in soils around the world, G. sulfurreducens has an impact on the global iron cycle. We measured the concentrations of metals, macromolecules, and basic elements in G. sulfurreducens to define this organism's composition. We also used gene expression data to discuss which proteins those metals could be associated with. We found that G. sulfurreducens has a large amount of lipid and iron compared to other bacteria-these observations are important for future microbiologists and biotechnologists working with the organism.

Coupling riboflavin de novo biosynthesis and cytochrome expression for improving extracellular electron transfer efficiency in Shewanella oneidensis

Shewanella oneidensis MR-1, as a model exoelectrogen with divergent extracellular electron transfer (EET) pathways, has been widely used in microbial fuel cells (MFCs). The electron transfer rate is largely determined by riboflavin (RF) and c-type cytochromes (c-Cyts). However, relatively low RF production and inappropriate amount of c-Cyts substantially impedes the capacity of improving the EET rate. In this work, coupling of riboflavin de novo biosynthesis and c-Cyts expression was implemented to enhance the efficiency of EET in S. oneidensis. Firstly, the upstream pathway of RF de novo biosynthesis was divided into four modules, and the expression level of 22 genes in above four modules was fine-tuned by employing promoters with different strength. Among them, genes zwf*, glyA, ybjU which exhibited the optimal RF production were combinatorially overexpressed, leading to enhancement of maximum output power density by 166%. Secondly, the diverse c-Cyts genes were overexpressed to match high RF production, and omcA was selected for further combination. Thirdly, RF de novo biosynthesis and c-Cyts expression were combined, resulting in 2.34-fold higher power output than the parent strain. This modular and combinatorial manipulation strategy provides a generalized reference to advance versatile practical applications of electroactive microorganisms. This article is protected by copyright. All rights reserved.

Gentle Patterning Approaches toward Compatibility with Bio-Organic Materials and Their Environmental Aspects

Advances in material science, bioelectronic, and implantable medicine combined with recent requests for eco-friendly materials and technologies inevitably formulate new challenges for nano- and micropatterning techniques. Overall, the importance of creating micro- and nanostructures is motivated by a large manifold of fundamental and applied properties accessible only at the nanoscale. Lithography is a crucial family of fabrication methods to create prototypes and produce devices on an industrial scale. The pure trend in the miniaturization of critical electronic semiconducting components has been recently enhanced by implementing bio-organic systems in electronics. So far, significant efforts have been made to find novel lithographic approaches and develop old ones to reach compatibility with delicate bio-organic systems and minimize the impact on the environment. Herein, such delicate materials and sophisticated patterning techniques are briefly reviewed.

Dual Inhibitory Activity of Petroselinic Acid Enriched in Fennel Against Porphyromonas gingivalis

Increasing evidence has shown that a major periodontal pathobiont, Porphyromonas gingivalis, triggers oral dysbiosis leading to deterioration not only of periodontal health, but also of several systemic conditions. In the present study we identified remarkable anti-P. gingivalis activity of Foeniculum vulgare (fennel), an herbal plant used in Asian cuisine as well as in traditional medicine, by screening of 92 extracts prepared from 23 edible plants. The n-hexane-extracted fennel (HEF) showed a rapid lethal action toward P. gingivalis, while it was rather ineffective with a wide range of other oral commensal bacterial species. Morphological analysis using both high-speed atomic force microscopy and field emission scanning electron microscopy revealed that a low concentration of HEF (8 μg/mL) resulted in formation of protruding nanostructures composed of outer membrane vesicle (OMV)-like particles, while a high concentration of HEF (64 μg/mL) induced bacteriolysis with overproduction of OMVs with unusual surface properties. Interestingly, HEF treatment resulted in deprivation of two outer membrane transporter proteins, RagA and RagB, which is essential for nutrient acquisition in P. gingivalis, by extracellularly releasing RagA/RagB-enriched OMVs. Furthermore, HEF showed gingipain-inhibitory activity toward both arginine-specific (Rgps) and lysine-specific (Kgp) gingipains, resulting in blocking oral epithelial cell rounding and the subsequent detachment from culture dishes. Finally, we isolated petroselinic acid as a major bactericide as well as a gingipain inhibitor through a bioassay-guided fractionation of HEF. Taken together, our findings suggest clinical applicability of HEF and petroselinic acid for periodontitis therapy to eliminate P. gingivalis and its major virulence factors on the basis of the dual anti-P. gingivalis activity, i.e., rapid bacteriolysis and gingipain inhibition.

Single molecule tracking of bacterial cell surface cytochromes reveals dynamics that impact long-distance electron transport

Multiheme cytochromes in Shewanella oneidensis MR-1 transport electrons across the cell wall, in a process called extracellular electron transfer. These electron conduits can also enable electron transport along and between cells. While the underlying mechanism is thought to involve a combination of electron hopping and lateral diffusion of cytochromes along membranes, these diffusive dynamics have never been observed in vivo. Here, we observe the mobility of quantum dot-labeled cytochromes on living cell surfaces and membrane nanowires, quantify their diffusion with single-particle tracking techniques, and simulate the contribution of these dynamics to electron transport. This work reveals the impact of redox molecule dynamics on bacterial electron transport, with implications for understanding and harnessing this process in the environment and bioelectronics.

Using a series of multiheme cytochromes, the metal-reducing bacterium Shewanella oneidensis MR-1 can perform extracellular electron transfer (EET) to respire redox-active surfaces, including minerals and electrodes outside the cell. While the role of multiheme cytochromes in transporting electrons across the cell wall is well established, these cytochromes were also recently found to facilitate long-distance (micrometer-scale) redox conduction along outer membranes and across multiple cells bridging electrodes. Recent studies proposed that long-distance conduction arises from the interplay of electron hopping and cytochrome diffusion, which allows collisions and electron exchange between cytochromes along membranes. However, the diffusive dynamics of the multiheme cytochromes have never been observed or quantified in vivo, making it difficult to assess their hypothesized contribution to the collision-exchange mechanism. Here, we use quantum dot labeling, total internal reflection fluorescence microscopy, and single-particle tracking to quantify the lateral diffusive dynamics of the outer membrane-associated decaheme cytochromes MtrC and OmcA, two key components of EET in S. oneidensis. We observe confined diffusion behavior for both quantum dot-labeled MtrC and OmcA along cell surfaces (diffusion coefficients D_MtrC = 0.0192 ± 0.0018 µm²/s, D_OmcA = 0.0125 ± 0.0024 µm²/s) and the membrane extensions thought to function as bacterial nanowires. We find that these dynamics can trace a path for electron transport via overlap of cytochrome trajectories, consistent with the long-distance conduction mechanism. The measured dynamics inform kinetic Monte Carlo simulations that combine direct electron hopping and redox molecule diffusion, revealing significant electron transport rates along cells and membrane nanowires.

Infrared fingerprints of water collective dynamics indicate proton transport in biological systems

Recent publications on spectroscopy of water layers in water bridge structures revealed a significant enhancement of the proton mobility and the dielectric contribution of translational vibrations of water molecules in the interfacial layers compared to bulk water. Herewith, the results of long-term studies of proton dynamics in solid-state acids have shown that proton mobility increases significantly with the predominance of hydronium, but not Zundel, cations in the aqueous phase. In the present work, in the light of these data, we reanalyzed our previously published results on broadband dielectric spectroscopy of bovine heart cytochrome c, bovine serum albumin, and the extracellular matrix and filaments of Shewanella oneidensis MR-1. We revealed that, just as in water bridges, an increase in electrical conductivity in these systems correlates with an increase in the dielectric contribution of water molecular translational vibrations. In addition, the appearance of spectral signatures of the hydronium cations was observed only in those cases when the system revealed noticeable electrical conductivity due to delocalized charge carriers.

Significance of Shewanella Species for the Phytoavailability and Toxicity of Arsenic-A Review

Simple Summary

The availability of some toxic heavy metals, such as arsenic (As), is related to increased human and natural activities. This type of metal availability in the environment is associated with various health and environmental issues. Such problems may arise due to direct contact with or consumption of plant products containing this metal in some of their parts. A microbial approach that employs a group of bacteria (Shewanella species) is proposed to reduce the negative consequences of the availability of this metal (As) in the environment. This innovative strategy can reduce As mobility, its spread, and uptake by plants in the environment. The benefits of this approach include its low cost and the possibility of not exposing other components of the environment to unfavourable consequences.

Abstract

The distribution of arsenic continues due to natural and anthropogenic activities, with varying degrees of impact on plants, animals, and the entire ecosystem. Interactions between iron (Fe) oxides, bacteria, and arsenic are significantly linked to changes in the mobility, toxicity, and availability of arsenic species in aquatic and terrestrial habitats. As a result of these changes, toxic As species become available, posing a range of threats to the entire ecosystem. This review elaborates on arsenic toxicity, the mechanisms of its bioavailability, and selected remediation strategies. The article further describes how the detoxification and methylation mechanisms used by Shewanella species could serve as a potential tool for decreasing phytoavailable As and lessening its contamination in the environment. If taken into account, this approach will provide a globally sustainable and cost-effective strategy for As remediation and more information to the literature on the unique role of this bacterial species in As remediation as opposed to conventional perception of its role as a mobiliser of As.

Electrochemical Microwell Plate to Study Electroactive Microorganisms in Parallel and Real-Time

Microbial resource mining of electroactive microorganism (EAM) is currently methodically hampered due to unavailable electrochemical screening tools. Here, we introduce an electrochemical microwell plate (ec-MP) composed of a 96 electrochemical deepwell plate and a recently developed 96-channel multipotentiostat. Using the ec-MP we investigated the electrochemical and metabolic properties of the EAM models Shewanella oneidensis and Geobacter sulfurreducens with acetate and lactate as electron donor combined with an individual genetic analysis of each well. Electrochemical cultivation of pure cultures achieved maximum current densities (j_max) and coulombic efficiencies (CE) that were well in line with literature data. The co-cultivation of S. oneidensis and G. sulfurreducens led to an increased current density of j_max of 88.57 ± 14.04 µA cm⁻² (lactate) and j_max of 99.36 ± 19.12 µA cm⁻² (lactate and acetate). Further, a decreased time period of reaching j_max and biphasic current production was revealed and the microbial electrochemical performance could be linked to the shift in the relative abundance.

Plugging into bacterial nanowires: a comparison of model electrogenic organisms

Extracellular electron transport (EET) is an important metabolic process used by many bacteria to remove excess electrons generated through cellular metabolism. However, there is still limited understanding about how the molecular mechanisms used to export electrons impact cellular metabolism. Here the EET pathways of two of the best-studied electrogenic organisms, Shewanella oneidensis and Geobacter sulferreducens, are described. Both organisms have superficially similar overall EET routes, but differ in the mechanisms used to oxidise menaquinol, transfer electrons across the outer membrane and reduce extracellular substrates. These mechanistic differences substantially impact both substrate choice and bacterial lifestyle.

Enhanced Microbial Ferrihydrite Reduction by Pyrogenic Carbon: Impact of Graphitic Structures

Electron-shuttling agents such as pyrogenic carbon (PC) can mediate long-distance electron transfer and play numerous key roles in aquatic and soil biogeochemical processes. The electron-shuttling capacity of PC relies on both the surface oxygen-containing functional groups and bulk graphitic structures. Although the impacts of oxygen-containing functional groups on the electron-shuttling performance of PC are well studied, there remains insufficient understanding on the function of graphitic structures. Here, we studied the functions of PC in mediating microbial (Shewanella oneidensis MR-1) reduction of ferrihydrite, a classic and geochemically important soil redox process. The results show that PC enhanced microbial ferrihydrite reduction by 20-115% and the reduction rates increased with PC pyrolysis temperature increasing from 500 to 900 °C. For PC prepared at low temperature (500-600 °C), the electron-shuttling capacity of PC is mainly attributed to its oxygen-containing functional groups, as indicated by a 50-60% decline in the ferrihydrite reduction rate when PC was reduced under a H₂ atmosphere to remove surface oxygen-containing functional groups. In stark contrast, for PC prepared at higher temperature (700-900 °C), the formation of PC graphitic structures was enhanced, as suggested by the higher electrical conductivity; accordingly, the graphitic structure exhibits greater importance in shuttling electrons, as demonstrated by a minor decline (10-18%) in the ferrihydrite reduction rate after H₂ treatment of PC. This study provides new insights into the nonlinear and combined role of graphitic structures and oxygen-containing functional groups of PC in mediating electron transfer, where the pyrolysis temperature of PC acts as a key factor in determining the electron-shuttling pathways.

Bio-electrochemical frameworks governing microbial fuel cell performance: technical bottlenecks and proposed solutions

Microbial fuel cells (MFCs) are recognized as a future technology with a unique ability to exploit metabolic activities of living microorganisms for simultaneous conversion of chemical energy into electrical energy. This technology holds the promise to offer sustained innovations and continuous development towards many different applications and value-added production that extends beyond electricity generation, such as water desalination, wastewater treatment, heavy metal removal, bio-hydrogen production, volatile fatty acid production and biosensors. Despite these advantages, MFCs still face technical challenges in terms of low power and current density, limiting their use to powering only small-scale devices. Description of some of these challenges and their proposed solutions is demanded if MFCs are applied on a large or commercial scale. On the other hand, the slow oxygen reduction process (ORR) in the cathodic compartment is a major roadblock in the commercialization of fuel cells for energy conversion. Thus, the scope of this review article addresses the main technical challenges of MFC operation and provides different practical approaches based on different attempts reported over the years.

Sustainable operation requires addressing key MFC-bottleneck issues. Enhancing extracellular electron transfer is the key to elevated MFC performance.

Bioelectrosynthesis systems

Bioelectrosynthesis (BES) systems exploit extracellular electron transport pathways to augment cellular metabolism. This strategy can be used to improve the economic viability of bio-based syntheses versus conventional methods, most notably petrochemical-based syntheses. It also has the potential to reduce the carbon footprint of biomanufacturing processes. Efficient channeling of cathode-derived electrons towards biosynthesis requires a better understanding of the biological mechanisms of electron transport as well as detailed evaluation of all aspects of process performance. More advanced solutions may deploy cell free systems that use ex situ generated reducing equivalents to improve economic performance.

Curved membrane structures induced by native lipids in giant vesicles

Native lipids in cell-membrane support crucial functions like intercell communication via their ability to deform into curved membrane structures. Cell membrane mimicking Giant unilamellar vesicles (GUV) is imperative in understanding native lipid's role in membrane transformation however remains challenging to assemble. We construct two giant vesicle models mimicking bacterial inner-membrane (IM) and outer-membrane (OM) under physiological conditions using single-step gel-assisted lipid swelling. IM vesicles composed of native bacterial lipids undergo small-scale membrane remodeling into bud and short-nanotube structures. In contrast, OM vesicles asymmetrically assembled from Lipopolysaccharide (LPS) and bacterial lipids underwent global membrane deformation under controlled osmotic stress. Remarkably, highly-curved structures mimicking cell-membrane architectures, including daughter vesicle networks interconnected by necks and nano-tubes ranging from micro to nanoscale, are generated in OM vesicles at osmotic stress comparable to that applied in IM vesicles. Further, we provide a quantitative description of the membrane structures by experimentally determining membrane elastic parameters, i.e., neck curvature and bending rigidity. We can conclude that a larger spontaneous curvature estimated from the neck curvature and softer membranes in OM vesicles is responsible for large-scale deformation compared to IM vesicles. Our findings will help comprehend the shape dynamics of complex native bacterial lipid membranes.

Engineering Wired Life: Synthetic Biology for Electroactive Bacteria

Electroactive bacteria produce or consume electrical current by moving electrons to and from extracellular acceptors and donors. This specialized process, known as extracellular electron transfer, relies on pathways composed of redox active proteins and biomolecules and has enabled technologies ranging from harvesting energy on the sea floor, to chemical sensing, to carbon capture. Harnessing and controlling extracellular electron transfer pathways using bioengineering and synthetic biology promises to heighten the limits of established technologies and open doors to new possibilities. In this review, we provide an overview of recent advancements in genetic tools for manipulating native electroactive bacteria to control extracellular electron transfer. After reviewing electron transfer pathways in natively electroactive organisms, we examine lessons learned from the introduction of extracellular electron transfer pathways into Escherichia coli. We conclude by presenting challenges to future efforts and give examples of opportunities to bioengineer microbes for electrochemical applications.

Electrical properties of outer membrane extensions from Shewanella oneidensis MR-1

Shewanella oneidensis MR-1 is a metal-reducing bacterium that is able to exchange electrons with solid-phase minerals outside the cell. These bacterial cells can produce outer membrane extensions (OMEs) that are tens of nanometers wide and several microns long. The capability of these OMEs to transport electrons is currently under investigation. Tubular chemically fixed OMEs from S. oneidensis have shown good dc conducting properties when measured in an air environment. However, no direct demonstration of the conductivity of the more common bubble-like OMEs has been provided yet, due to the inherent difficulties in measuring it. In the present work, we measured the electrical properties of bubble-like OMEs in a dry air environment by Scanning Dielectric Microscopy (SDM) in force detection mode. We found that at the frequency of the measurements (∼2 kHz), OMEs show an insulating behavior, with an equivalent homogeneous dielectric constant ε_OME = 3.7 ± 0.7 and no dephasing between the applied ac voltage and the measured ac electric force. The dielectric constant measured for the OMEs is comparable to that obtained for insulating supramolecular protein structures (ε_protein = 3-4), pointing towards a rich protein composition of the OMEs, probably coming from the periplasm. Based on the detection sensitivity of the measuring instrument, the upper limit for the ac longitudinal conductivity of bubble-like OMEs in a dry air environment has been set to σ_OME,ac < 10^-5 S m^-1, a value several orders of magnitude smaller than the dc conductivity measured in tubular chemically fixed OMEs. The lack of conductivity of bubble-like OMEs can be attributed to the relatively large separation between cytochromes in these larger OMEs and to the suppression of cytochrome mobility due to the dry environmental conditions.

Capturing the signal of weak electricigens: a worthy endeavour

Recently several non-traditional electroactive microorganisms have been discovered. These can be considered weak electricigens; microorganisms that typically rely on soluble electron acceptors and donors in their lifecycle but are also capable of extracellular electron transfer (EET), resulting in either a low, unreliable, or otherwise unexpected current. These unanticipated electroactive microorganisms represent a new chapter in electromicrobiology and have important medical, environmental, and biotechnological relevance. As such, it is essential to continue the momentum of their discovery. However, their study poses unique challenges due to their low current output. Capturing their signal necessitates novel approaches including unconventional electrode choice, the use of sensitive electrochemical techniques, and modifications of conventional experiments that use bioelectrochemical systems (BES).

A bacterial membrane sculpting protein with BAR domain-like activity

Bin/Amphiphysin/RVS (BAR) domain proteins belong to a superfamily of coiled-coil proteins influencing membrane curvature in eukaryotes and are associated with vesicle biogenesis, vesicle-mediated protein trafficking, and intracellular signaling. Here, we report a bacterial protein with BAR domain-like activity, BdpA, from Shewanella oneidensis MR-1, known to produce redox-active membrane vesicles and micrometer-scale outer membrane extensions (OMEs). BdpA is required for uniform size distribution of membrane vesicles and influences scaffolding of OMEs into a consistent diameter and curvature. Cryo-TEM reveals that a strain lacking BdpA produces lobed, disordered OMEs rather than membrane tubules or narrow chains produced by the wild-type strain. Overexpression of BdpA promotes OME formation during planktonic growth of S. oneidensis where they are not typically observed. Heterologous expression results in OME production in Marinobacter atlanticus and Escherichia coli. Based on the ability of BdpA to alter membrane architecture in vivo, we propose that BdpA and its homologs comprise a newly identified class of bacterial BAR domain-like proteins.

Nanosecond heme-to-heme electron transfer rates in a multiheme cytochrome nanowire reported by a spectrally unique His/Met-ligated heme

Multiheme cytochromes have been identified as essential proteins for electron exchange between bacterial enzymes and redox substrates outside of the cell. In microbiology, these proteins contribute to efficient energy storage and conversion. For biotechnology, multiheme cytochromes contribute to the production of green fuels and electricity. Furthermore, these proteins inspire the design of molecular-scale electronic devices. Here, we report exceptionally high rates of heme-to-heme electron transfer in a multiheme cytochrome. We expect similarly high rates, among the highest reported for ground-state electron transfer in biology, in other multiheme cytochromes as the close-packed hemes adopt similar configurations despite very different amino acid sequences and protein folds.

Proteins achieve efficient energy storage and conversion through electron transfer along a series of redox cofactors. Multiheme cytochromes are notable examples. These proteins transfer electrons over distance scales of several nanometers to >10 μm and in so doing they couple cellular metabolism with extracellular redox partners including electrodes. Here, we report pump-probe spectroscopy that provides a direct measure of the intrinsic rates of heme–heme electron transfer in this fascinating class of proteins. Our study took advantage of a spectrally unique His/Met-ligated heme introduced at a defined site within the decaheme extracellular MtrC protein of Shewanella oneidensis. We observed rates of heme-to-heme electron transfer on the order of 10⁹ s⁻¹ (3.7 to 4.3 Å edge-to-edge distance), in good agreement with predictions based on density functional and molecular dynamics calculations. These rates are among the highest reported for ground-state electron transfer in biology. Yet, some fall 2 to 3 orders of magnitude below the Moser–Dutton ruler because electron transfer at these short distances is through space and therefore associated with a higher tunneling barrier than the through-protein tunneling scenario that is usual at longer distances. Moreover, we show that the His/Met-ligated heme creates an electron sink that stabilizes the charge separated state on the 100-μs time scale. This feature could be exploited in future designs of multiheme cytochromes as components of versatile photosynthetic biohybrid assemblies.

Label-Free Probing of Electron Transfer Kinetics of Single Microbial Cells on a Single-Layer Graphene via Structural Color Microscopy

Studies of electron transfer at the population level veil the nature of the cell itself; however, in situ probing of the electron transfer dynamics of individual cells is still challenging. Here we propose label-free structural color microscopy for this aim. We demonstrate that Shewanella oneidensis MR-1 cells show unique structural color scattering, changing with the redox state of cytochrome complexes in the outer membrane. It enables quantitatively and noninvasive studies of electron transfer in single microbial cells during bioelectrochemical activities, such as extracellular electron transfer (EET) on a transparent single-layer graphene electrode. Increasing the applied potential leads to the associated EET current, accompanied by more oxidized cytochromes. The high spatiotemporal resolution of the proposed method not only demonstrates the large diversity in EET activity among microbial cells but also reveals the subcellular asymmetric distribution of active cytochromes in a single cell. We anticipate that it provides a potential platform for further exploring the electron transfer mechanism of subcellular structure.

In situ imaging of bacterial outer membrane projections and associated protein complexes using electron cryo-tomography

The ability to produce outer membrane projections in the form of tubular membrane extensions (MEs) and membrane vesicles (MVs) is a widespread phenomenon among diderm bacteria. Despite this, our knowledge of the ultrastructure of these extensions and their associated protein complexes remains limited. Here, we surveyed the ultrastructure and formation of MEs and MVs, and their associated protein complexes, in tens of thousands of electron cryo-tomograms of ~90 bacterial species that we have collected for various projects over the past 15 years (Jensen lab database), in addition to data generated in the Briegel lab. We identified outer MEs and MVs in 13 diderm bacterial species and classified several major ultrastructures: (1) tubes with a uniform diameter (with or without an internal scaffold), (2) tubes with irregular diameter, (3) tubes with a vesicular dilation at their tip, (4) pearling tubes, (5) connected chains of vesicles (with or without neck-like connectors), (6) budding vesicles and nanopods. We also identified several protein complexes associated with these MEs and MVs which were distributed either randomly or exclusively at the tip. These complexes include a secretin-like structure and a novel crown-shaped structure observed primarily in vesicles from lysed cells. In total, this work helps to characterize the diversity of bacterial membrane projections and lays the groundwork for future research in this field.

Biocatalyst physiology and interplay: a protagonist of MFC operation

Microbial fuel cells (MFC) have been foreseen as a sustainable renewable energy resource to meet future energy demand. In the past, several studies have been executed in both benchtop and pilot scale to produce electrical energy from wastewater. The key role players in this technology that leads to the operation are microbes, mainly bacteria. The dominant among them is termed as "exoelectrogens" that have the capability to produce and transport electron by utilizing waste source. The current review focuses on such electrogenic bacteria's involvement for enhanced power generation of MFC. The pathway of electron transfer in their cell along and its conduction to the extracellular environment of the MFC system are critically discussed. The interaction of the microbes in various MFC operational conditions, including the role of substrate and solid electron acceptors, i.e., anode, external resistance, temperature, and pH, was also discussed in depth along with biotechnological advancement and future research perspective.

Liposoluble quinone promotes the reduction of hydrophobic mineral and extracellular electron transfer of Shewanella oneidensis MR-1

A large number of reaction systems are composed of hydrophobic interfaces and microorganisms in natural environment. However, it is not clear how microorganisms adjust their breathing patterns and respond to hydrophobic interfaces. Here, Shewanella oneidensis MR-1 was used to reduce ferrihydrite of a hydrophobic surface. Through Fe(II) kinetic analysis, it was found that the reduction rate of hydrophobic ferrihydrite was 1.8 times that of hydrophilic one. The hydrophobic surface of the mineral hinders the way the electroactive microorganism uses the water-soluble electron mediator riboflavin for indirect electron transfer and promotes MR-1 to produce more liposoluble quinones. Ubiquinone can mediate electron transfer at the hydrophobic interface. Ubiquinone-30 (UQ-6) increases the reduction rate of hydrophobic ferrihydrite from 38.5 ± 4.4 to 52.2 ± 0.8 μM·h⁻¹. Based on the above experimental results, we propose that liposoluble electron mediator ubiquinone can act on the extracellular hydrophobic surface, proving that the metabolism of hydrophobic minerals is related to endogenous liposoluble quinones. Hydrophobic modification of minerals encourages electroactive microorganisms to adopt differentiated respiratory pathways. This finding helps in understanding the electron transfer behavior of the microbes at the hydrophobic interface and provides new ideas for the study of hydrophobic reactions that may occur in systems, such as soil and sediment.

•

Extracellular electron transfer can be regulated by wettability of mineral surface

•

Hydrophobic surface hinders the transport of water-soluble mediator riboflavin

•

Ubiquinone can mediate extracellular electron transfer at the hydrophobic interface

Biogeochemical dynamics and microbial community development under sulfate- and iron-reducing conditions based on electron shuttle amendment

Iron reduction and sulfate reduction are two of the major biogeochemical processes that occur in anoxic sediments. Microbes that catalyze these reactions are therefore some of the most abundant organisms in the subsurface, and some of the most important. Due to the variety of mechanisms that microbes employ to derive energy from these reactions, including the use of soluble electron shuttles, the dynamics between iron- and sulfate-reducing populations under changing biogeochemical conditions still elude complete characterization. Here, we amended experimental bioreactors comprised of freshwater aquifer sediment with ferric iron, sulfate, acetate, and the model electron shuttle AQDS (9,10-anthraquinone-2,6-disulfonate) and monitored both the changing redox conditions as well as changes in the microbial community over time. The addition of the electron shuttle AQDS did increase the initial rate of Fe^III reduction; however, it had little effect on the composition of the microbial community. Our results show that in both AQDS- and AQDS+ systems there was an initial dominance of organisms classified as Geobacter (a genus of dissimilatory Fe^III-reducing bacteria), after which sequences classified as Desulfosporosinus (a genus of dissimilatory sulfate-reducing bacteria) came to dominate both experimental systems. Furthermore, most of the ferric iron reduction occurred under this later, ostensibly “sulfate-reducing” phase of the experiment. This calls into question the usefulness of classifying subsurface sediments by the dominant microbial process alone because of their interrelated biogeochemical consequences. To better inform models of microbially-catalyzed subsurface processes, such interactions must be more thoroughly understood under a broad range of conditions.

Intrinsic electronic conductivity of individual atomically resolved amyloid crystals reveals micrometer-long hole hopping via tyrosines

Proteins are commonly known to transfer electrons over distances limited to a few nanometers. However, many biological processes require electron transport over far longer distances. For example, soil and sediment bacteria transport electrons, over hundreds of micrometers to even centimeters, via putative filamentous proteins rich in aromatic residues. However, measurements of true protein conductivity have been hampered by artifacts due to large contact resistances between proteins and electrodes. Using individual amyloid protein crystals with atomic-resolution structures as a model system, we perform contact-free measurements of intrinsic electronic conductivity using a four-electrode approach. We find hole transport through micrometer-long stacked tyrosines at physiologically relevant potentials. Notably, the transport rate through tyrosines (10⁵ s^-1) is comparable to cytochromes. Our studies therefore show that amyloid proteins can efficiently transport charges, under ordinary thermal conditions, without any need for redox-active metal cofactors, large driving force, or photosensitizers to generate a high oxidation state for charge injection. By measuring conductivity as a function of molecular length, voltage, and temperature, while eliminating the dominant contribution of contact resistances, we show that a multistep hopping mechanism (composed of multiple tunneling steps), not single-step tunneling, explains the measured conductivity. Combined experimental and computational studies reveal that proton-coupled electron transfer confers conductivity; both the energetics of the proton acceptor, a neighboring glutamine, and its proximity to tyrosine influence the hole transport rate through a proton rocking mechanism. Surprisingly, conductivity increases 200-fold upon cooling due to higher availability of the proton acceptor by increased hydrogen bonding.

Biosynthetic FeS/BC hybrid particles enhanced the electroactive bacteria enrichment in microbial electrochemical systems

Modifying the surface of an anode can improve electroactive bacteria (EAB) enrichment, thereby enhancing the performance of the associated microbial electrochemical systems (MESs). In this study, biosynthetic FeS nanoparticles were used to modify the anode in MESs. The experimental results demonstrated that the stable maximum voltage of the FeS composited biochar (FeS/BC)-modified anode reached 0.72 V, which is 20% higher than that of the control. The maximum power density with the FeS/BC anode was 793 mW/m², which is 46.31% higher than that obtained with the control (542 mW/m²). According to cyclic voltammetry (CV) analysis, FeS/BC facilitates the direct electron transfer between bacteria and the electrode. The biomass protein concentration of the FeS/BC anode was 841.75 μg/cm², which is almost 1.5 times higher than that of the carbon cloth anode (344.25 μg/cm²); hence, FeS/BC modification can promote biofilm formation. The composition of Geobacter species on the FeS/BC anode (75.16%) was much higher than that on the carbon cloth anode (4.81%). All the results demonstrated that the use of the biosynthetic FeS/BC anode is an environmentally friendly and efficient strategy for enhancing the electroactive biofilm formation and EAB enrichment in MESs.