Bioinspired programmable wettability arrays for droplets manipulation

Photothermal-Driven Droplet Manipulation: A Perspective

Optofluidics, which utilizes the interactions between light and fluids to realize various functions, has garnered increasing attention owing to the advantages of operational simplicity, exceptional flexibility, rapid response, etc. As one of the typical light-fluid interactions, the localized photothermal effect serving as a stimulus has been widely used for fluid manipulation. Particularly, significant progress on photothermal-driven droplet manipulation has been made. In this perspective, recent advancements in localized photothermal effect driven droplet manipulation are summarized. First, the photothermal manipulation of droplets on open surfaces is outlined. An attractive droplet manipulation of light droplet levitation above the gas-liquid interface via localized photothermal effect is then discussed. Besides, the photothermal-driven manipulation of droplets in an immiscible liquid phase is also discussed. Although promising, further development of photothermal-driven droplet manipulation is still needed. The challenges and perspectives of this light droplet manipulation strategy for broad implementation are summarized, which will help future studies and applications.

Individual and collective manipulation of multifunctional bimodal droplets in three dimensions

Spatiotemporally controllable droplet manipulation is vital across numerous applications, particularly in miniature droplet robots known for their exceptional deformability. Despite notable advancements, current droplet control methods are predominantly limited to two-dimensional (2D) deformation and motion of an individual droplet, with minimal exploration of 3D manipulation and collective droplet behaviors. Here, we introduce a bimodal actuation strategy, merging magnetic and optical fields, for remote and programmable 3D guidance of individual ferrofluidic droplets and droplet collectives. The magnetic field induces a magnetic dipole force, prompting the formation of droplet collectives. Simultaneously, the optical field triggers isothermal changes in interfacial tension through Marangoni flows, enhancing buoyancy and facilitating 3D movements of individual and collective droplets. Moreover, these droplets can function autonomously as soft robots, capable of transporting objects. Alternatively, when combined with a hydrogel shell, they assemble into jellyfish-like robots, driven by sunlight. These findings present an efficient strategy for droplet manipulation, broadening the capabilities of droplet-based robotics.

3D Cell Culture Method in Channel-Free Water-in-Oil Droplets

A new channel-free water-in-oil (WO) droplet 3D cell culture method is proposed to address the challenges while maintaining the advantages of the conventional 3D cell culture methods. The proposed WO method can fundamentally solve the constraint of spheroids size, a common challenge in conventional 3D culture, by using droplet size controllability. The 3D cell culture performance of the WO method is verified by comparing it with the conventional 3D cell culture methods. A systematic investigation of the culture conditions of the WO method confirms the working range of cell concentration and droplet size, as well as the scalability of spheroid size. Adjusting droplet size and cell concentration enables rapid spheroid formation with large and high cell concentration droplets or fast spheroid growth with small and low cell concentration droplets, providing control over the spheroid size and growth rate according to the purpose. Furthermore, long-term culture is demonstrated for 1 month with the proposed method, showing the largest spheroid culture and demonstrating the possibility that this method can be used not only for spheroid formation but also for organoid studies. Finally, if a WO-based automated 3D cell culture system is developed, it will be a useful tool for organoid research.

Enhanced and controlled droplet ejection on magnetic responsive polydimethylsiloxane microarrays

Efficient removal of droplets from solid surfaces is significant in various fields, including fog collection and condensation heat transfer. However, droplets removal on common surfaces with static structures often occurs passively, which limits the possibility of increasing removal efficiency and lacks intelligent controllability. In this paper, an active strategy based on extrusion ejection is proposed and demonstrated on the magnetic responsive polydimethylsiloxane (PDMS) superhydrophobic microplates (MPSM). The MPSM can reversibly transit between the upright and tilted state as the external magnetic field is alternately applied and removed. Under the magnetic field, the direction and trajectories of droplets departure can be intelligently controlled, demonstrating excellent controllability. More importantly, compared with the static structure where the droplet must reach a certain size before departure, droplets can be ejected at smaller sizes as the MPSM is tilted. These advantages are of great significance in many fields, such as a highly efficient fog harvesting system. This strategy of extrusion ejection based on dynamic surface structure control reported in this work may provide fresh ideas for efficient droplet manipulation.

Smart materials for light control of droplets

Droplet manipulation plays a critical role in both fundamental research and practical applications, especially when combined with smart materials and external fields to achieve multifunctional droplet manipulation. Light control of droplets has emerged as a significant and widely used strategy, driven primarily by photochemistry, photomechanics, light-induced Marangoni effects, and light-induced electric effects. This approach allowing for droplet manipulation with high spatial and temporal resolution, all while maintaining a remote and non-contact mode of operation. This review aims to provide a comprehensive overview of the mechanisms underlying light control of droplets, the design of smart materials for this purpose, and the diverse range of applications enabled by this technique. These applications include merging, splitting, releasing, forwarding, backward movement, and rotation of droplets, as well as chemical reactions, droplet robots, and microfluidics. By presenting this information, we aim to establish a unified framework that guides the sustainable development of light control of droplets. Additionally, this review addresses the challenges associated with light control of droplets and suggests potential directions for future development.

Droplet Manipulation on Bioinspired Slippery Surfaces: From Design Principle to Biomedical Applications

Droplet manipulation with high efficiency, high flexibility, and programmability, is essential for various applications in biomedical sciences and engineering. Bioinspired liquid-infused slippery surfaces (LIS), with exceptional interfacial properties, have led to expanding research for droplet manipulation. In this review, an overview of actuation principles is presented to illustrate how materials or systems can be designed for droplet manipulation on LIS. Recent progress on new manipulation methods on LIS is also summarized and their prospective applications in anti-biofouling and pathogen control, biosensing, and the development of digital microfluidics are presented. Finally, an outlook is made on the key challenges and opportunities for droplet manipulation on LIS.

Patterned Manipulated Surface Based on Femtosecond Laser with Adjustable Wetting Speed and Directional Fluid Delivery

Recently, due to the crucial roles of multifunctional liquid manipulation surfaces in biomedical transportation, microfluidics, and chemical engineering, the demand for controllable and functional aspects of directed liquid transportation has increased significantly. However, designing an intelligent manipulation surface that is easy to manufacture and fully functional remains an immense challenge. To address this challenge, a smart surface that can regulate the rate of liquid transport within a patterned channel by temperature is reported. A synergistically controlled approach of poly(N-isopropylacrylamide) and micropillar shape-memory polymers (SMPs) was used to modulate the wetting rate of liquids on surfaces. By femtosecond laser direct writing, temperature-responsive composite surfaces are embedded in the microstructure of shape-memory polymers (SMPs) in a patterned manner, resulting in the preparation of novel programmable liquid manipulation surfaces incorporating boundaries possessing asymmetric wettability. Since the smart surface is based on SMP, the superhydrophobic part in the superhydrophobic/controllable wettability patterning platform is also programmed for droplet directional transport, which takes advantage of the difference in wettability between the rewritable indentation track and the periphery to allow droplets to flow into the temperature-controlled velocity track, enriching the functionality of the surface. In addition, based on its excellent controllability and patterning, the surface has been shown to be used in microfluidic circuit chips with self-cleaning properties, which provides new ideas for circuit timing control. This study provides promising prospects for the effective development of multifunctional liquid steering surfaces, lab-on-a-chip, and microfluidic devices.

Open microfluidics: droplet microarrays as next generation multiwell plates for high throughput screening

Multiwell plates are prominent in the biological and chemical sciences; however, they face limitations in terms of throughput and deployment in emerging bioengineering fields. Droplet microarrays, as an open microfluidic technology, organise tiny droplets typically in the order of thousands, on an accessible plate. In this perspective, we summarise current approaches for generating droplets, fluid handling on them, and analysis within droplet microarrays. By enabling unique plate engineering opportunities, demonstrating the necessary experimental procedures required for manipulating and interacting with biological cells, and integrating with label-free analytical techniques, droplet microarrays can be deployed across a more extensive experimental domain than what is currently covered by multiwell plates. Droplet microarrays thus offer a solution to the bottlenecks associated with multiwell plates, particularly in the areas of biological cultivation and high-throughput compound screening.

Light-Responsive Materials in Droplet Manipulation for Biochemical Applications

Miniaturized droplets, characterized by well-controlled microenvironments and capability for parallel processing, have significantly advanced the studies on enzymatic evolution, molecular diagnostics, and single-cell analysis. However, manipulation of small-sized droplets, including moving, merging, and trapping of the targeted droplets for complex biochemical assays and subsequent analysis, is not trivial and remains technically demanding. Among various techniques, light-driven methods stand out as a promising candidate for droplet manipulation in a facile and flexible manner, given the features of contactless interaction, high spatiotemporal resolution, and biocompatibility. This review therefore compiles an in-depth discussion of the governing mechanisms underpinning light-driven droplet manipulation. Besides, light-responsive materials, representing the core of light-matter interaction and the key character converting light into different forms of energy, are particularly assessed in this review. Recent advancements in light-responsive materials and the most notable applications are comprehensively archived and evaluated. Continuous innovations and rational engineering of light-responsive materials are expected to propel the development of light-driven droplet manipulation, equip droplets with enhanced functionality, and broaden the applications of droplets for biochemical studies and routine biochemical investigations.

Designing of anisotropic gradient surfaces for directional liquid transport: Fundamentals, construction, and applications

Many biological surfaces are capable of transporting liquids in a directional manner without energy consumption. Inspired by nature, constructing asymmetric gradient surfaces to achieve desired droplet transport, such as a liquid diode, brings an incredibly valuable and promising area of research with a wide range of applications. Enabled by advances in nanotechnology and manufacturing techniques, biomimetics has emerged as a promising avenue for engineering various types of anisotropic material system. Over the past few decades, this approach has yielded significant progress in both fundamental understanding and practical applications. Theoretical studies revealed that the heterogeneous composition and topography mainly govern the wetting mechanisms and dynamics behavior of droplets, including the interdisciplinary aspects of materials, chemistry, and physics. In this review, we provide a concise overview of various biological surfaces that exhibit anisotropic droplet transport. We discussed the theoretical foundations and mechanisms of droplet motion on designed surfaces and reviewed recent research advances in droplet directional transport on designed plane surfaces and Janus membranes. Such liquid-diode materials yield diverse promising applications, involving droplet collection, liquid separation and delivery, functional textiles, and biomedical applications. We also discuss the recent challenges and ongoing approaches to enhance the functionality and application performance of anisotropic materials.

Directional Rebound of Microdroplets on a Magneto-Responsive Micropillar Array Surface

The manipulation of droplet movement behavior is of scientific importance and has practical applications in many fields, such as biological analysis, water collection, oil-water separation, deicing, antifrosting, and so on. Using the magneto-responsive surface to dynamically change the surface morphology is an effective method to realize droplet manipulation. A replica molding technique was used to fabricate the surface with the magneto-responsive micropillar array, and the direction of the micropillar array could be changed dynamically with the magnetic induction intensity. The mechanism of the droplet directional rebound on the magneto-responsive surface and the implementation of the controllability of droplet movement were investigated. On the magneto-responsive surface, it was achievable to realize the directional rebound of droplets on the micrometer scale. The critical condition for the droplet directional rebound was identified. The force and energy of the droplet during the spreading and retraction stages were analyzed, which lay a theoretical foundation for the precise control of droplet directional rebound.

Magnetically Responsive Superhydrophobic Surface with Reversibly Switchable Wettability: Fabrication, Deformation, and Switching Performance

Responsive surfaces with reversibly switchable wettability have attracted widespread attention due to their diverse range of potential applications in the past few years. As a representative example, the magnetically actuated dynamic regulation structured surfaces provide a convenient and unique approach to achieving remote control and instantaneous response. However, (quasi)quantitative design strategies and economical fabrication methods with high precision for magnetically responsive surfaces with both superhydrophobicity and superior wetting switchability still remain challenging. In this work, a manufacturing technique for high-aspect-ratio magnetically responsive superhydrophobic surfaces (MRSSs) via the integration of micromilling, replica molding, and coating modification is proposed. The geometrical parameters of magnetic micropillar arrays (MMAs) on the surface are specially designed on the basis of the Cassie-Wenzel (C-W) transition critical condition in order to guarantee the initial superhydrophobicity of the surface. Benefiting from the reconfigurable microstructures of MMAs in response to magnetic fields (i.e., shifting between upright and curved states), the wettability and adhesion of MRSSs can be reversibly switched. The smart wetting controllability presented on MRSSs is proven to be largely determined by the geometrical parameters and deformation capacity of the micropillars, while the visible wetting switching is mainly ascribed to the variation in wetting regimes of droplets. The modification of the superhydrophobic coatings on the micropillar top is also demonstrated to be capable of further enhancing the initial hydrophobicity and switchable wettability of surfaces, producing water droplets with a volume of 4-6 μL to exhibit the reversible switch from low adhesive superhydrophobicity to high adhesive hydrophilicity. In addition to providing an alternative fabrication strategy, this work also presents a set of design concepts for more applicable and sensitive MRSSs, offering a reference to both fundamental research and practical applications.

Tailoring biomaterials for biomimetic organs-on-chips

Organs-on-chips are microengineered microfluidic living cell culture devices with continuously perfused chambers penetrating to cells. By mimicking the biological features of the multicellular constructions, interactions among organs, vascular perfusion, physicochemical microenvironments, and so on, these devices are imparted with some key pathophysiological function levels of living organs that are difficult to be achieved in conventional 2D or 3D culture systems. In this technology, biomaterials are extremely important because they affect the microstructures and functionalities of the organ cells and the development of the organs-on-chip functions. Thus, herein, we provide an overview on the advances of biomaterials for the construction of organs-on-chips. After introducing the general components, structures, and fabrication techniques of the biomaterials, we focus on the studies of the functions and applications of these biomaterials in the organs-on-chips systems. Applications of the biomaterial-based organs-on-chips as alternative animal models for pharmaceutical, chemical, and environmental tests are described and highlighted. The prospects for exciting future directions and the challenges of biomaterials for realizing the further functionalization of organs-on-chips are also presented.

Millirobot Based on a Phase-Transformable Magnetorheological Liquid Metal

Droplet robots have attracted much attention in recent years due to their large-scale deformability and flexible mobility in confined spaces. However, droplet robots are always difficult to maintain rigid shapes, making them difficult to manipulate objects with large inertia. Moreover, their low conductivity makes them unable to complete tasks such as circuit repair. Herein, a millirobot made from magnetorheological liquid metal is proposed to address the problems. Specifically, the magnetorheological liquid metal (MLM) robot is made by engulfing iron particles into gallium-indium alloy, and the mass fraction of the MLM robot is determined by microscopic observation and rheological test. The MLM robot possesses both solid and liquid properties, enabling the robot with plasticity, large-scale deformability, good conductivity, motion flexibility, and good object manipulation. The MLM robot can achieve almost all of the functions of existing droplet robots, including splitting, merging, navigating in narrow channels, and pushing objects. In addition, it can also accomplish some other tasks that are difficult for existing droplet robots, such as pulling large objects, repairing damaged circuits selectively and reversibly, and repairing suspended circuits through plasticity. The demos show that MLM robots can traverse narrow spaces and repair circuit damage selectively and reversibly. It is believed that MLM robots can enrich diverse functionalities in the future.

Bio-Inspired Highly Brilliant Structural Colors and Derived Photonic Superstructures for Information Encryption and Fluorescence Enhancement

Inspired by the brilliant and tunable structural colors based on the large refractive index contrast (Δn) and non-close-packing structures of chameleon skins, ZnS-silica photonic crystals (PCs) with highly saturated and adjustable colors are fabricated. Due to the large Δn and non-close-packing structure, ZnS-silica PCs show 1) intense reflectance (maximal: 90%), wide photonic bandgaps, and large peak areas, 2.6-7.6, 1.6, and 4.0 times higher than those of silica PCs, respectively; 2) tunable colors by simply adjusting the volume fraction of particles with the same size, more convenient than the conventional way of altering particle sizes; and 3) a relatively low threshold of PC's thickness (57 µm) possessing maximal reflectance compared to that (>200 µm) of the silica PCs. Benefiting from the core-shell structure of the particles, various derived photonic superstructures are fabricated by co-assembling ZnS-silica and silica particles into PCs or by selectively etching silica or ZnS of ZnS-silica/silica and ZnS-silica PCs. A new information encryption technique is developed based on the unique reversible "disorder-order" switch of water-responsive photonic superstructures. Additionally, ZnS-silica PCs are ideal candidates for enhancing fluorescence (approximately tenfold), approximately six times higher than that of silica PC.

Reactive Multilayer Coating As Versatile Nanoarchitectonics for Customizing Various Bioinspired Liquid Wettabilities

In last few decades, multilayer coatings have achieved enormous attention owing to their unique ability to tune thickness, topography, and chemical composition for developing various functional materials. Such multilayer coatings were mostly and conventionally derived by following a simple layer-by-layer (LbL) deposition process through the strategic use of electrostatic interactions, hydrogen bonding, host-guest interactions, covalent bonding, etc. In the conventional design of multilayer coatings, the chemical composition and morphology of coatings are modulated during the process of multilayer constructions. In such an approach, the postmodulations of the porous multilayers with different and desired chemistries are challenging to achieve due to the lack of availability of readily and selectively reactive moieties. Recently, the design of readily and selectively reactive multilayer coatings (RMLCs) provided a facile basis for postmodulating the prepared coating with various desired chemistries. In fact, by taking advantage of the inherent ability of co-optimizing the topography and various chemistries in porous RMLCs, different durable bioinspired liquid wettabilities (i.e., superhydrophobicity, underwater superoleophobicity, underwater superoleophilicity, slippery property, etc.) were successfully derived. Such interfaces have enormous potential in various prospective applications. In this review, we intend to give an overview of the evolution of LbL multilayer coatings and their synthetic strategies and discuss the key advantages of porous RMLCs in terms of achieving and controlling wettability properties. Recent attempts toward various applications of such multilayer coatings that are strategically embedded with different desired liquid wettabilities will be emphasized.

Stimuli-responsive silk fibroin for on-demand drug delivery

Stimuli-responsive "smart" hydrogel biomaterials have attracted great attention in the biomedical field, especially in designing novel on-demand drug delivery systems. As a handful natural biomaterial approved by US Food and Drug Administration, silk fibroin (SF) has unique high temperature resistance as well as tunable structural composition. These properties make it one of the most ideal candidates for on-demand drug delivery. Meanwhile, recent advances in polymer modification and nanomaterials have fostered the development of various stimuli-responsive delivery systems. Here, we first review the recent advance in designing responsive SF-based delivery systems in different stimulus sources. These systems are able to release mediators in a desired manner in response to specific stimuli in active or passive manners. We then describe applications of these specially designed responsive delivery systems in wound healing, tumor therapy, as well as immunomodulation. We also discuss the future challenges and prospects of stimuli-responsive SF-based delivery systems.

Organic Matter Transfer Caused by Concentration Difference Creates TC4 Surfaces with Switchable Wettability

In this paper, low-cost electrochemical processing and heat treatment were adopted to fabricate titanium alloy surfaces with switchable wettability. Meanwhile, surface structure, roughness, and oxide content were regulated by electrochemical processing voltage. The effects of surface structure, roughness, oxide content, temperature, and time of heat treatment on switchable wettability were investigated. In addition to suitable structural conditions, surface chemistry is also crucial to preparing metal surfaces with switchable wettability. The surface chemistry of electrochemical processed surfaces was changed by organic matter transfer during heat treatment. In a certain voltage range, suitable surface structure, high roughness, and surface oxide content by high voltage contribute to the organic matter transfer. In a certain range of heating temperature and time, the concentration difference of organic matter is the premise of organic matter transfer. Concurrently, the higher the temperature, the faster the speed of organic matter transfer. Different from other relevant studies, the hypothesis that the concentration difference promotes organic matter transfer is proposed and verified by interesting experiments. The difference concentration of organic matter between the environment and the samples, as well as between the two samples, was created to promote organic matter transfer. Therefore, the electrochemical processed surfaces with switchable wettability were obtained by organic matter transfer in two ways.

Active Droplet Transport Induced by Moving Meniscus on a Slippery Magnetic Responsive Micropillar Array

Intelligent droplet manipulation plays a crucial role in both scientific research and industrial technology. Inspired by nature, meniscus driving is an ingenious way to spontaneously transport droplets. However, the shortages of short-range transport and droplet coalescence limit its application. Here, an active droplet manipulation strategy based on the slippery magnetic responsive micropillar array (SMRMA) is reported. With the aid of a magnetic field, the micropillar array bends and induces the infusing oil to form a moving meniscus, which can attract nearby droplets and transport them for a long range. Significantly, clustered droplets on SMRMA can be isolated by micropillars, avoiding droplet coalescence. Moreover, through adjusting the arrangement of the micropillars of SMRMA, multi-functional droplet manipulation such as unidirectional droplet transport, multi-droplet transport, droplet mixing, and droplet screening can be achieved. This work provides a promising approach for intelligent droplet manipulation and unfolds broad application prospects in microfluidics, microchemical reaction, biomedical engineering, and other fields.

On-Chip Liquid Manipulation via a Flexible Dual-Layered Channel Possessing Hydrophilic/Hydrophobic Dichotomy

The hydrophilic/hydrophobic cooperative interface provides a smart platform to control liquid distribution and delivery. Through the fusion of flexibility and complex structure, we present a manipulable, open, and dual-layered liquid channel (MODLC) for on-demand mechanical control of fluid delivery. Driven by anisotropic Laplace pressure, the mechano-controllable asymmetric channel of MODLC can propel the directional slipping of liquid located between the paired tracks. Upon a single press, the longest transport distance can reach 10 cm with an average speed of ∼3 cm/s. The liquid on the MODLC can be immediately manipulated by pressing or dragging processes, and versatile liquid-manipulating processes on hierarchical MODLC chips have been achieved, including remote droplet magneto-control, continuous liquid distributor, and gas-producing chip. The flexible hydrophilic/hydrophobic interface and its assembly can extend the function and applications of the wettability-patterned interface, which should update our understanding of complex systems for sophisticated liquid transport.

A Review of Smart Superwetting Surfaces Based on Shape-Memory Micro/Nanostructures

Bioinspired smart superwetting surfaces with special wettability have aroused great attention from fundamental research to technological applications including self-cleaning, oil-water separation, anti-icing/corrosion/fogging, drag reduction, cell engineering, liquid manipulation, and so on. However, most of the reported smart superwetting surfaces switch their wettability by reversibly changing surface chemistry rather than surface microstructure. Compared with surface chemistry, the regulation of surface microstructure is more difficult and can bring novel functions to the surfaces. As a kind of stimulus-responsive material, shape-memory polymer (SMP) has become an excellent candidate for preparing smart superwetting surfaces owing to its unique shape transformation property. This review systematically summarizes the recent progress of smart superwetting SMP surfaces including fabrication methods, smart superwetting phenomena, and related application fields. The smart superwettabilities, such as superhydrophobicity/superomniphobicity with tunable adhesion, reversible switching between superhydrophobicity and superhydrophilicity, switchable isotropic/anisotropic wetting, slippery surface with tunable wettability, and underwater superaerophobicity/superoleophobicity with tunable adhesion, can be obtained on SMP micro/nanostructures by regulating the surface morphology. Finally, the challenges and future prospects of smart superwetting SMP surfaces are discussed.

Wetting Effect on Patterned Substrates

A droplet deposited on a solid substrate leads to the wetting phenomenon. A natural observation is the lotus effect, known for its superhydrophobicity. This special feature is engendered by the structured microstructure of the lotus leaf, namely, surface heterogeneity, as explained by the quintessential Cassie-Wenzel theory (CWT). In this work, recent designs of functional substrates are overviewed based on the CWT via manipulating the contact area between the liquid and the solid substrate as well as the intrinsic Young's contact angle. Moreover, the limitation of the CWT is discussed. When the droplet size is comparable to the surface heterogeneity, anisotropic wetting morphology often appears, which is beyond the scope of the Cassie-Wenzel work. In this case, several recent studies addressing the anisotropic wetting effect on chemically and mechanically patterned substrates are elucidated. Surface designs for anisotropic wetting morphologies are summarized with respect to the shape and the arrangement of the surface heterogeneity, the droplet volume, the deposition position of the droplet, as well as the mean curvature of the surface heterogeneity. A thermodynamic interpretation for the wetting effect and the corresponding open questions are presented at the end.

Inkjet-Assisted Electroformation of Magnetically Guidable Water Striders for Interfacial Microfluidic Manipulation

Gerridae, colloquially called water striders, are a peculiar class of insects characterized by the extraordinary ability to walk on the surface of water bodies. Owing to this capacity, they constitute an ideal source of inspiration for designing untethered microdevices capable of navigating the interface between two fluids. Such steerable micrometric objects can be of great interest for various applications, ranging from the handling of floating objects to the remote control of microreactions and the manipulation of self-assembled monolayers. This paper describes the realization of artificial water striders via an inkjet-assisted electroforming approach. Inkjet deposition patterns the negative mask, which is subsequently filled with different layers of metals through electroforming. One of such layers is the magnetic alloy NiFe, which allows wireless propulsion of the striders by means of externally applied magnetic fields. The magnetic actuation tests prove good maneuverability at the water-air and silicone oil-air interfaces, with superior control over the speed and position of the devices. The surface of the devices is modified to tune its superficial energy in order to maximize buoyancy on these different combinations of fluids. A magnetic field-controlled strider manipulates a droplet and demonstrates collecting oil microdroplets and synthesizing platinum nanoparticles by chemical microreactions. Finally, the remotely operated microrobot could be employed in laboratories as a real avatar of chemists.

Directed evolution of diacetylchitobiose deacetylase via high-throughput droplet sorting with a novel, bacteria-based biosensor

Numerous biological disciplines rely on high-throughput cell sorting. Flow cytometry, the current gold standard, is capable of ultrahigh-throughput cell sorting, but measurements are primarily limited to cell size and surface marker. Droplet sorting technology is gaining increasing attention with the ability to provide an individual environment for the analysis of single-cell secretion. Although various droplet detecting methods, such as fluorescence, absorbance, mass spectrum, imaging analysis, have been developed for droplet sorting, it remains challenging to establish high-throughput sorting methods for numerous analytes. We aim to develop a high-throughput sorting system based on the glucosamine (GlcN) measurement for the directed evolution of diacetylchitobiose deacetylase (Dac), the key enzyme for GlcN production. To overcome the limitation that no high-throughput sorting system existed for GlcN, we designed a novel bacteria-based biosensor capable of converting GlcN to a positively correlated fluorescence signal. Through characterization and optimization, it was possible to detect GlcN in droplets for high-throughput droplet sorting. We recovered the best Dac mutant S60I/R157T/F168S after sorting ∼0.2 million Dac mutants; its activity was 48.6 ± 1.5 U/mL, which was 1.8-times that of our previously discovered Dac mutant R157T (27.2 ± 1.8 U/mL). This result successfully demonstrated the combination of high-throughput droplet sorting technology and a bacteria-based biosensor, which could facilitate the industrial production of GlcN and serve as a model for similar droplet sorting applications.

Magnetocontrollable droplet mobility on liquid crystal-infused porous surfaces

Magnetocontrollable droplet mobility on surfaces of both solids and simple fluids have been widely used in a wide range of applications. However, little is understood about the effect of the magnetic field on the wettability and mobility of droplets on structured fluids. Here, we report the manipulation of the dynamic behaviors of water droplets on a film of thermotropic liquid crystals (LCs). We find that the static wetting behavior and static friction of water droplets on a 4'-octyl-4-biphenylcarbonitrile (8CB) film strongly depend on the LC mesophases, and that a magnetic field caused no measurable change to these properties. However, we find that the droplet dynamics can be affected by a magnetic field as it slides on a nematic 8CB film, but not on isotropic 8CB, and is dependent on both the direction and strength of the magnetic field. By measuring the dynamic friction of a droplet sliding on a nematic 8CB film, we find that a magnetic field alters the internal orientational ordering of the 8CB which in turn affects its viscosity. We support this interpretation with a scaling argument using the LC magnetic coherence length that includes (i) the elastic energy from the long-range orientational ordering of 8CB and (ii) the free energy from the interaction between 8CB and a magnetic field. Overall, these results advance our understanding of droplet mobility on LC films and enable new designs for responsive surfaces that can manipulate the mobility of water droplets.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary material (further details of the stability of LCIPS against water-induced dewetting, the interfacial tension and contact angle measurement using a goniometer, the estimation of the thickness of LC wrapping layer at air-water interface on droplets, SEM measurements, the average sliding velocity of a water droplet on 5CB, E7, silicone oil, and mineral oil films with and without a magnetic field, representative force diagram (F _d versus time) of a 3-µL water droplet moving at a speed of 0.1 mm/s on a nematic 8CB film, F _dynamic acting on 3 µL water droplets moving at speeds of 0.1-1 mm/s on an isotropic 8CB film, the calculated magnetic coherence length as a function of the magnitude of the magnetic field applied to the nematic LCIPS, and the apparent advancing and receding contact angles of a moving water droplet on nematic LCIPS as a function of time, and polarized light micrographs (top view) of a nematic 8CB film between two DMOAP-functionalized glass slides before and after applying a horizontal magnetic field) is available in the online version of this article at 10.1007/s12274-022-5318-y.

Magnetocontrollable droplet mobility on liquid crystal-infused porous surfaces

Magnetocontrollable droplet mobility on surfaces of both solids and simple fluids have been widely used in a wide range of applications. However, little is understood about the effect of the magnetic field on the wettability and mobility of droplets on structured fluids. Here, we report the manipulation of the dynamic behaviors of water droplets on a film of thermotropic liquid crystals (LCs). We find that the static wetting behavior and static friction of water droplets on a 4'-octyl-4-biphenylcarbonitrile (8CB) film strongly depend on the LC mesophases, and that a magnetic field caused no measurable change to these properties. However, we find that the droplet dynamics can be affected by a magnetic field as it slides on a nematic 8CB film, but not on isotropic 8CB, and is dependent on both the direction and strength of the magnetic field. By measuring the dynamic friction of a droplet sliding on a nematic 8CB film, we find that a magnetic field alters the internal orientational ordering of the 8CB which in turn affects its viscosity. We support this interpretation with a scaling argument using the LC magnetic coherence length that includes (i) the elastic energy from the long-range orientational ordering of 8CB and (ii) the free energy from the interaction between 8CB and a magnetic field. Overall, these results advance our understanding of droplet mobility on LC films and enable new designs for responsive surfaces that can manipulate the mobility of water droplets.

Electronic Supplementary Material

Supplementary material (further details of the stability of LCIPS against water-induced dewetting, the interfacial tension and contact angle measurement using a goniometer, the estimation of the thickness of LC wrapping layer at air-water interface on droplets, SEM measurements, the average sliding velocity of a water droplet on 5CB, E7, silicone oil, and mineral oil films with and without a magnetic field, representative force diagram (Fd versus time) of a 3-µL water droplet moving at a speed of 0.1 mm/s on a nematic 8CB film, Fdynamic acting on 3 µL water droplets moving at speeds of 0.1-1 mm/s on an isotropic 8CB film, the calculated magnetic coherence length as a function of the magnitude of the magnetic field applied to the nematic LCIPS, and the apparent advancing and receding contact angles of a moving water droplet on nematic LCIPS as a function of time, and polarized light micrographs (top view) of a nematic 8CB film between two DMOAP-functionalized glass slides before and after applying a horizontal magnetic field) is available in the online version of this article at 10.1007/s12274-022-5318-y.

Surface Modification, Topographic Design and Applications of Superhydrophobic Systems

Superhydrophobic surfaces with expanded wetting behaviors, like tunable adhesion, hybrid surface hydrophobicity and smart hydrophobic switching have attracted increasing attention due to their broad applications. Herein, the construction methods, mechanisms and advanced applications of special superhydrophobicity are reviewed, and hydro/superhydrophobic modifications are categorized and discussed based on their surface chemistry, and topographic design. The formation and maintenance of special superhydrophobicity in the metastable state are also examined and explored. In addition, particular attention is paid to the use of special wettability in various applications, such as membrane distillation, droplet-based electricity generators and anti-fogging surfaces. Finally, the challenges for practical applications and future research directions are discussed.

On-demand, remote and lossless manipulation of biofluid droplets

The recent global outbreaks of epidemics and pandemics have shown us that we are severely under-prepared to cope with infectious agents. Exposure to infectious agents present in biofluids (e.g., blood, saliva, urine etc.) poses a severe risk to clinical laboratory personnel and healthcare workers, resulting in hundreds of millions of hospital-acquired and laboratory-acquired infections annually. Novel technologies that can minimize human exposure through remote and automated handling of infectious biofluids will mitigate such risk. In this work, we present biofluid manipulators, which allow on-demand, remote and lossless manipulation of virtually any liquid droplet. Our manipulators are designed by integrating thermo-responsive soft actuators with superomniphobic surfaces. Utilizing our manipulators, we demonstrate on-demand, remote and lossless manipulation of biofluid droplets. We envision that our biofluid manipulators will not only reduce manual operations and minimize exposure to infectious agents, but also pave the way for developing inexpensive, simple and portable robotic systems, which can allow point-of-care operations, particularly in developing nations.

A magnetic responsive composite surface for high-performance droplet and bubble manipulation

Here, a magnetic responsive composite surface (MRCS) was prepared by injecting a magnetic elastomer into ZnO nanoarrays for intelligent control of droplet/bubble transport. This non-pollution, non-contact operation method has shown great potential in micro-fluids, micro-chemical reactors, chip laboratory environments and other related applications.

A review on control of droplet motion based on wettability modulation: principles, design strategies, recent progress, and applications

The transport of liquid droplets plays an essential role in various applications. Modulating the wettability of the material surface is crucial in transporting droplets without external energy, adhesion loss, or intense controllability requirements. Although several studies have investigated droplet manipulation, its design principles have not been categorized considering the mechanical perspective. This review categorizes liquid droplet transport strategies based on wettability modulation into those involving (i) application of driving force to a droplet on non-sticking surfaces, (ii) formation of gradient surface chemistry/structure, and (iii) formation of anisotropic surface chemistry/structure. Accordingly, reported biological and artificial examples, cutting-edge applications, and future perspectives are summarized.

Superhydrophilic–superhydrophobic patterned surfaces: From simplified fabrication to emerging applications

Superhydrophilic–superhydrophobic patterned surfaces constitute a branch of surface chemistry involving the two extreme states of superhydrophilicity and superhydrophobicity combined on the same surface in precise patterns. Such surfaces have many advantages, including controllable wettability, enrichment ability, accessibility, and the ability to manipulate and pattern water droplets, and they offer new functionalities and possibilities for a wide variety of emerging applications, such as microarrays, biomedical assays, microfluidics, and environmental protection. This review presents the basic theory, simplified fabrication, and emerging applications of superhydrophilic–superhydrophobic patterned surfaces. First, the fundamental theories of wettability that explain the spreading of a droplet on a solid surface are described. Then, the fabrication methods for preparing superhydrophilic–superhydrophobic patterned surfaces are introduced, and the emerging applications of such surfaces that are currently being explored are highlighted. Finally, the remaining challenges of constructing such surfaces and future applications that would benefit from their use are discussed.

Tailoring matter orbitals mediated using a nanoscale topographic interface for versatile colloidal current devices

Conventional micro-particle manipulation technologies have been used for various biomedical applications using dynamics on a plane without vertical movement. In this case, irregular topographic structures on surfaces could be a factor that causes the failure of the intended control. Here, we demonstrated a novel colloidal particle manipulation mediated by the topographic effect generated by the "micro hill" and "surface gradient" around a micro-magnet. The magnetic landscape, matter orbital, created by periodically arranged circular micro-magnets, induces a symmetric orbit of magnetic particle flow under a rotating magnetic field. The topographic effect can break this symmetry of the energy distribution by controlling the distance between the source of the driving force and target particles by several nanometers on the surface morphology. The origin symmetric orbit of colloidal flow can be distorted by modifying the symmetry in the energy landscape at the switching point without changing the driving force. The enhancement of the magnetic effect of the micro-magnet array can lead to the recovery of the symmetry of the orbit. Also, this effect on the surfaces of on-chip-based devices configured by symmetry control was demonstrated for selective manipulation, trapping, recovery, and altering the direction using a time-dependent magnetic field. Hence, the developed technique could be used in various precise lab-on-a-chip applications, including where the topographic effect is required as an additional variable without affecting the existing control method.

Light control of droplets on photo-induced charged surfaces

The manipulation of droplets plays a vital role in fundamental research and practical applications, from chemical reactions to bioanalysis. As an intriguing and active format, light control of droplets, typically induced by photochemistry, photomechanics, light-induced Marangoni effects or light-induced electric fields, enables remote and contactless control with remarkable spatial and temporal accuracy. However, current light control of droplets suffers from poor performance and limited reliability. Here we develop a new superamphiphobic material that integrates the dual merits of light and electric field by rationally preparing liquid metal particles/poly(vinylidene fluoride-trifluoroethylene) polymer composites with photo-induced charge generation capability in real time, enabling light control of droplets on the basis of photo-induced dielectrophoretic force. We demonstrate that this photo-induced charged surface (PICS) imparts a new paradigm for controllable droplet motion, including high average velocity (∼35.9 mm s^-1), unlimited distance, multimode motions (e.g. forward, backward and rotation) and single-to-multiple droplet manipulation, which are otherwise unachievable in conventional strategies. We further extend light control of droplets to robotic and bio-applications, including transporting a solid cargo in a closed tube, crossing a tiny tunnel, avoiding obstacles, sensing the changing environment via naked-eye color shift, preparing hydrogel beads, transporting living cells and reliable biosensing. Our PICS not only provides insight into the development of new smart interface materials and microfluidics, but also brings new possibilities for chemical and biomedical applications.

Floating Hydrogel Beads Made by Droplet Impact

Droplet impact is a ubiquitous natural phenomenon that has been widely utilized to inspire and facilitate many industrial applications. Compared to the widely studied water droplet impact onto identical liquid surfaces, the water droplet impact onto an oil layer floating on a water bath (OLW) receives far less attention and its potential application has never been exploited. Herein, the process of water droplet impact onto the OLW is investigated with emphasis on the metastable states and potential applications. It is found that the dramatic deformation of the oil-water interface caused by the water droplet impact leads to two metastable states: oil in water in oil in water (O/W/O/W) and oil in water in oil (O/W/O). Through the subsequent introduction of gelation process, the metastable states can be frozen into floating hydrogel beads with similar shape to the roly-poly toys, which are attempted in gastric retentive drug delivery and algae bloom control. Specifically, the floating hydrogel beads perform well in gastric retentive drug delivery in vitro due to their inherent slow-release properties and floating capability. In addition, the floating hydrogel beads loading photocatalysts can capture more sunshine, and exhibit high photocatalytic efficiency, which is thus responsible for efficient algae bloom control.

Adhesion behaviors of water droplets on bioinspired superhydrophobic surfaces

The adhesion behaviors of droplets on surfaces are attracting increasing attention due to their various applications. Many bioinspired superhydrophobic surfaces with different adhesion states have been constructed in order to mimic the functions of natural surfaces such as a lotus leaf, a rose petal, butterfly wings, etc. In this review, we first present a brief introduction to the fundamental theories of the adhesion behaviors of droplets on various surfaces, including low adhesion, high adhesion and anisotropic adhesion states. Then, different techniques to characterize droplet adhesion on these surfaces, including the rotating disk technique, the atomic force microscope cantilever technique, and capillary sensor-based techniques, are described. Wetting behaviors, and the switching between different adhesion states on bioinspired surfaces, are also summarized and discussed. Subsequently, the diverse applications of bioinspired surfaces, including water collection, liquid transport, drag reduction, and oil/water separation, are discussed. Finally, the challenges of using liquid adhesion behaviors on various surfaces, and future applications of these surfaces, are discussed.

Role of chemistry in bio-inspired liquid wettability

Chemistry and topography are the two distinct available tools for customizing different bio-inspired liquid wettability including superhydrophobicity, superamphiphobicity, underwater superoleophobicity, underwater superoleophilicity, and liquid infused slippery property. In nature, various living species possessing super and special liquid wettability inherently comprises of distinctly patterned surface topography decorated with low/high surface energy. Inspired from the topographically diverse natural species, the variation in surface topography has been the dominant approach for constructing bio-inspired antiwetting interfaces. However, recently, the modulation of chemistry has emerged as a facile route for the controlled tailoring of a wide range of bio-inspired liquid wettability. This review article aims to summarize the various reports published over the years that has elaborated the distinctive importance of both chemistry and topography in imparting and modulating various bio-inspired wettability. Moreover, this article outlines some obvious advantages of chemical modulation approach over topographical variation. For example, the strategic use of the chemical approach has allowed the facile, simultaneous, and independent tailoring of both liquid wettability and other relevant physical properties. We have also discussed the design of different antiwetting patterned and stimuli-responsive interfaces following the strategic and precise alteration of chemistry for various prospective applications.

Hierarchically Structured, All-Aqueous-Coated Hydrophobic Surfaces with pH-Selective Droplet Transfer Capability

Often inspired by nature, techniques for precise droplet manipulation have found applications in microfluidics, microreactors, and water harvesting. However, a widely applicable strategy for surface modification combining simultaneous hydrophobicity and pH-sensitivity has not yet been achieved by employing environmentally friendly assembly conditions. The introduction of pH-responsive groups to an otherwise fluorinated polyphosphazene (PPZ) unlocks pH-selective droplet capture and transfer. Here, an all-aqueous layer-by-layer (LbL) deposition of polyelectrolytes is used to create unique hydrophobic coatings, endowing surfaces with the ability to sense environmental pH. The high hydrophobicity of these coatings (ultimately reaching a contact angle >120° on flat surfaces) is enabled by the formation of hydrophobic nanoscale domains and controllable by the degree of fluorination of PPZs, polyamine-binding partners, deposition pH, and coating thickness. Inspired by the hierarchical structure of rose petals, these versatile coatings reach a contact angle >150° when deposited on structured surfaces while introducing a tunable adhesivity that enables precise droplet manipulation. The films exhibited a strongly pronounced parahydrophobic rose petal behavior characterized through the contact angle hysteresis. Depositing as few as five bilayers (∼25 nm) on microstructured rather than smooth substrates resulted in superhydrophobicity with water contact angles >150° and the attenuation of the contact angle hysteresis, enabling highly controlled transfer of aqueous droplets. The pH-selective droplet transfer was achieved between surfaces with either the same microstructure and LbL film building blocks, which were assembled at different pH, or between surfaces with different microstructures coated with identical films. The demonstrated capability of these hydrophobic LbL films to endow surfaces with controlled hydrophobicity through adsorption from aqueous solutions and control the adhesion and transfer of water droplets between surfaces can be used in droplet-based microfluidics applications and water collection/harvesting.

Three-Dimensional Droplet Manipulation with Electrostatic Levitation

An active and precise method for three-dimensional (3D) droplet manipulation is introduced. By modulating the local electrostatic force acting on droplets in carrier oil between needle plate electrodes, the vertical motion of droplets can be controlled, including the droplet levitation at the interface between the carrier oil and the air. Levitated droplets can be translated horizontally with high efficiency by the motion of the needle electrode. With controllable local deformation on the flexible plate electrode, selective manipulation can be realized for multiple droplets. Applying the manipulation method proposed, a platform is built and various droplet handling, such as transport, merging, and mixing, is performed effectively. Complex droplet transport trajectories are achieved by moving the needle electrode. The droplet transport velocity can reach up to 37 mm/s. The introduced method has fundamental advantages of avoiding cross-contamination between droplets, enhancing the flexibility, eliminating the transport track constraint, and lowering costs with straightforward and precise droplet manipulation.

Modularizable Liquid-Crystal-Based Open Surfaces Enable Programmable Chemical Transport and Feeding using Liquid Droplets

Droplet-based miniature reactors have attracted interest in both fundamental studies, for the unique reaction kinetics they enable, and applications in bio-diagnosis and material synthesis. However, the precise and automatic feeding of chemicals, important for the delicate reactions in these miniaturized chemical reactors, either requires complex, high-cost microfluidic devices or lacks the capability to maintain a pinning-free droplet movement. Here, the design and synthesis of a new class of liquid crystal (LC)-based open surfaces, which enable a controlled chemical release via a programmable LC phase transition without sacrificing the free transport of the droplets, are reported. It is demonstrated that their intrinsic slipperiness and self-healing properties enable a modularizable assembly of LC surfaces that can be loaded with different chemicals to achieve a wide range of chemical reactions carried out within the droplets, including sequential and parallel chemical reactions, crystal growth, and polymer synthesis. Finally, an LC-based chemical feeding device is developed that can automatically control the release of chemicals to direct the simultaneous differentiation of human induced pluripotent stem cells into endothelial progenitor cells and cardiomyocytes. Overall, these LC surfaces exhibit desirable levels of automation, responsiveness, and controllability for use in miniature droplet carriers and reactors.

Precise Controlling of Friction and Adhesion on Reprogrammable Shape Memory Micropillars

Microstructured surfaces with stimuli-responsive performances have aroused great attention in recent years, but it still remains a significant challenge to endow surfaces with precisely controlled morphological changes in microstructures, so as to get the precise control of regional properties (e.g., friction, adhesion). Herein, a kind of carbonyl iron particle-doped shape memory polyurethane micropillar with precisely controllable morphological changes is realized, upon remote near-infrared light (NIR) irradiation. Owing to the reversible transition of micropillars between bent and upright states, the micro-structured surface exhibits precisely controllable low-to-high friction transitions, together with the changes of friction coefficient ranging from ∼0.8 to ∼1.2. Hence, the changes of the surface friction even within an extremely small area can be precisely targeted, under local NIR laser irradiation. Moreover, the water droplet adhesion force of the surface can be reversibly switched between ∼160 and ∼760 μN, demonstrating the application potential in precisely controllable wettability. These features indicate that the smart stimuli-responsive micropillar arrays would be amenable to a variety of applications that require remote, selective, and on-demand responses, such as a refreshable Braille display system, micro-particle motion control, lab-on-a-chip, and microfluidics.

Bioinspired Photo-Responsive Liquid Gating Membrane

Stomata in the plant leaves are channels for gas exchange between the plants and the atmosphere. The gas exchange rate can be regulated by adjusting the opening and closing of stoma under the external stimuli, which plays a vital role in plant survival. Under visible light irradiation, the stomata open for gas exchange with the surroundings, while under intense UV light irradiation, the stomata close to prevent the moisture loss of plants from excessive transpiration. Inspired by this stomatal self-protection behavior, we have constructed a bioinspired photo-responsive liquid gating membrane (BPRLGM) through infusing the photo-responsive gating liquid obtained by dissolving the azobenzene-based photo-responsive surfactant molecules (AzoC8F15) in N,N-Dimethylacetamide (DMAC) into nylon porous substrate, which can reversibly switch the open/closed states under different photo-stimuli. Theoretical analysis and experimental data have demonstrated that the reversible photoisomerization of azobenzene-based surfactant molecules induces a change in surface tension of the photo-responsive gating liquid, which eventually results in the reversible variation of substantial critical pressure for gas through BPRLGM under alternating UV (PCritical (off)) and visible (PCritical (on)) light irradiations. Therefore, driven by a pressure difference ΔP between PCritical (on) and PCritical (off), the reversible switches on the open/closed states of this photo-responsive liquid gating membrane can be realized under photo-stimuli. This bioinspired membrane with switchable open/closed liquid gating performance under photo-stimuli has the opportunity to be used in the precise and contactless control of microfluidics.

Microscale hydrodynamic confinements: shaping liquids across length scales as a toolbox in life sciences

Hydrodynamic phenomena can be leveraged to confine a range of biological and chemical species without needing physical walls. In this review, we list methods for the generation and manipulation of microfluidic hydrodynamic confinements in free-flowing liquids and near surfaces, and elucidate the associated underlying theory and discuss their utility in the emerging area of open space microfluidics applied to life-sciences. Microscale hydrodynamic confinements are already starting to transform approaches in fundamental and applied life-sciences research from precise separation and sorting of individual cells, allowing localized bio-printing to multiplexing for clinical diagnosis. Through the choice of specific flow regimes and geometrical boundary conditions, hydrodynamic confinements can confine species across different length scales from small molecules to large cells, and thus be applied to a wide range of functionalities. We here provide practical examples and implementations for the formation of these confinements in different boundary conditions - within closed channels, in between parallel plates and in an open liquid volume. Further, to enable non-microfluidics researchers to apply hydrodynamic flow confinements in their work, we provide simplified instructions pertaining to their design and modelling, as well as to the formation of hydrodynamic flow confinements in the form of step-by-step tutorials and analytical toolbox software. This review is written with the idea to lower the barrier towards the use of hydrodynamic flow confinements in life sciences research.

Hipster microcarriers: exploring geometrical and topographical cues of non-spherical microcarriers in biomedical applications

Structure and organisation are key aspects of the native tissue environment, which ultimately condition cell fate via a myriad of processes, including the activation of mechanotransduction pathways. By modulating the formation of integrin-mediated adhesions and consequently impacting cell contractility, engineered geometrical and topographical cues may be introduced to activate downstream signalling and ultimately control cell morphology, proliferation, and differentiation. Microcarriers appear as attractive vehicles for cell-based tissue engineering strategies aiming to modulate this 3D environment, but also as vehicles for cell-free applications, given the ease in tuning their chemical and physical properties. In this review, geometry and topography are highlighted as two preponderant features in actively regulating interactions between cells and the extracellular matrix. While most studies focus on the 2D environment, we focus on how the incorporation of these strategies in 3D systems could be beneficial. The techniques applied to design 3D microcarriers with unique geometries and surface topographical cues are covered, as well as specific tissue engineering approaches employing these microcarriers. In fact, successfully achieving a functional histoarchitecture may depend on a combination of fine-tuned geometrically shaped microcarriers presenting intricately tailored topographical cues. Lastly, we pinpoint microcarrier geometry as a key player in cell-free biomaterial-based strategies, and its impact on drug release kinetics, the production of steerable microcarriers to target tumour cells, and as protein or antibody biosensors.

Pancake Jumping of Sessile Droplets

Rapid droplet shedding from surfaces is fundamentally interesting and important in numerous applications such as anti-icing, anti-fouling, dropwise condensation, and electricity generation. Recent efforts have demonstrated the complete rebound or pancake bouncing of impinging droplets by tuning the physicochemical properties of surfaces and applying external control, however, enabling sessile droplets to jump off surfaces in a bottom-to-up manner is challenging. Here, the rapid jumping of sessile droplets, even cold droplets, in a pancake shape is reported by engineering superhydrophobic magnetically responsive blades arrays. This largely unexplored droplet behavior, termed as pancake jumping, exhibits many advantages such as short interaction time and high energy conversion efficiency. The critical conditions for the occurrence of this new phenomenon are also identified. This work provides a new toolkit for the attainment of well-controlled and active steering of both sessile and impacting droplets for a wide range of applications.

A Biocompatible Vibration-Actuated Omni-Droplets Rectifier with Large Volume Range Fabricated by Femtosecond Laser

High-performance droplet transport is crucial for diverse applications including biomedical detection, chemical micro-reaction, and droplet microfluidics. Despite extensive progress, traditional passive and active strategies are restricted to limited liquid types, small droplet volume ranges, and poor biocompatibilities. Moreover, more challenges occur for biological fluids due to large viscosity and low surface tension. Here, a vibration-actuated omni-droplets rectifier (VAODR) consisting of slippery ratchet arrays fabricated by femtosecond laser and vibration platforms is reported. Through the relative competition between the asymmetric adhesive resistance originating from the lubricant meniscus on the VAODR and the periodic inertial driving force originating from isotropic vibration, the fast (up to ≈60 mm s^-1 ), programmable, and robust transport of droplets is achieved for a large volume range (0.05-2000 µL, V_max /V_min  ≈ 40 000) and in various transport modes including transport of liquid slugs in tubes, programmable and sequential transport, and bidirectional transport. This VAODR is general to a high diversity of biological and medical fluids, and thus can be used for biomedical detection including ABO blood-group tests and anticancer drugs screening. These strategies provide a complementary and promising platform for maneuvering omni-droplets that are fundamental to biomedical applications and other high-throughput omni-droplet operation fields.

Slippery magnetic track inducing droplet and bubble manipulation

It is difficult for traditional droplet manipulation to combine transportation and rapid capture of droplets on an inclined surface. In this work, a slippery magnetic track (SMT) is presented to manipulate droplets and bubbles in a magnetic field. By changing the direction of the magnetic field, the transitions from non-pinning to pinning states on the SMT can be achieved. Through the SMT surface, it is possible to capture and release droplets and bubbles in the vertical direction. The detailed theoretical and experimental studies of droplet and bubble manipulation are discussed. This work demonstrates the versatility of magnetic manipulation, including the transition of droplet trajectory and bubble removal, which will facilitate the research of intelligent interfaces in energy transmission, drug transport and micro engineering.