Engineering upper hinge improves stability and effector function of a human IgG1

A structural peculiarity of Antarctic fish IgM drives the generation of an engineered mAb by CRISPR/Cas9

IgM is the major circulating Ig isotype in teleost fish, showing in Antarctic fish unique features such as an extraordinary long hinge region, which plays a crucial role in antibody structure and function. In this work, we describe the replacement of the hinge region of a murine monoclonal antibody (mAb) with the peculiar hinge from Antarctic fish IgM. We use the CRISPR/Cas9 system as a powerful tool for generating the engineered mAb. Then, we assessed its functionality by using an innovative plasmonic substrate based on bimetallic nanoislands (AgAuNIs). The affinity constant of the modified mAb was 2.5-fold higher than that obtained from wild-type mAb against the specific antigen. Here, we show the suitability of the CRISPR/Cas9 method for modifying a precise region in immunoglobulin gene loci. The overall results could open a frontier in further structural modifications of mAbs for biomedical and diagnostic purposes.

Effects of glycans and hinge on dynamics in the IgG1 Fc

The crystallizable fragment (Fc) domain of immunoglobulin subclass IgG1 antibodies is engineered for a wide variety of pharmaceutical applications. Two important structural variables in Fc constructs are the hinge region connecting the Fc to the antigen binding fragments (Fab) and the glycans present in various glycoforms. These components affect receptor binding interactions that mediate immune activation. To design new antibody drugs, a robust in silico method for linking stability to structural changes is necessary. In this work, all-atom simulations were used to compare the dynamic behavior of the four structural variants arising from presence or absence of the hinge and glycans. We expressed the simplest of these constructs, the 'minimal Fc' with no hinge and no glycans, in Escherichia coli and report its crystal structure. The 'maximal Fc' that includes full hinge and G0F/G1F glycans is based on a previously reported structure, Protein Data Bank (PDB) ID: 5VGP. These, along with two intermediate structures (with only the glycans or with only the hinge) were used to independently measure the stability effects of the two structural variables using umbrella sampling simulations. Principal component analysis (PCA) was used to determine free energy effects along the Fc's dominant mode of motion. This work provides a comprehensive picture of the effects of hinge and glycans on Fc dynamics and stability.Communicated by Ramaswamy H. Sarma.

Design, construction and in vivo functional assessment of a hinge truncated sFLT01

Gene therapy for the treatment of ocular neovascularization has reached clinical trial phases. The AAV2-sFLT01 construct was already evaluated in a phase 1 open-label trial administered intravitreally to patients with advanced neovascular age-related macular degeneration. SFLT01 protein functions by binding to VEGF and PlGF molecules and inhibiting their activities simultaneously. It consists of human VEGFR1/Flt-1 (hVEGFR1), a polyglycine linker, and the Fc region of human IgG1. The IgG1 upper hinge region of the sFLT01 molecule makes it vulnerable to radical attacks and prone to causing immune reactions. This study pursued two goals: (i) minimizing the immunogenicity and vulnerability of the molecule by designing a truncated molecule called htsFLT01 (hinge truncated sFLT01) that lacked the IgG1 upper hinge and lacked 2 amino acids from the core hinge region; and (ii) investigating the structural and functional properties of the aforesaid chimeric molecule at different levels (in silico, in vitro, and in vivo). Molecular dynamics simulations and molecular mechanics energies combined with Poisson-Boltzmann and surface area continuum solvation calculations revealed comparable free energy of binding and binding affinity for sFLT01 and htsFLT01 to their cognate ligands. Conditioned media from human retinal pigment epithelial (hRPE) cells that expressed htsFLT01 significantly reduced tube formation in HUVECs. The AAV2-htsFLT01 virus suppressed vascular development in the eyes of newborn mice. The htsFLT01 gene construct is a novel anti-angiogenic tool with promising improvements compared to existing treatments.

Biophysical Characterization of the Contribution of the Fab Region to the IgG-FcγRIIIa Interaction

The cell-surface receptor FcγRIIIa is crucial to the efficacy of therapeutic antibodies as well as the immune response. The interaction of the Fc region of IgG molecules with FcγRIIIa has been characterized, but until recently, it was thought that the Fab regions were not involved in the interaction. To evaluate the influence of the Fab regions in a biophysical context, we carried out surface plasmon resonance analyses using recombinant FcγRIIIa ligands. A van't Hoff analysis revealed that compared to the interaction of the papain-digested Fc fragment with FcγRIIIa, the interaction of commercially available, full-length rituximab with FcγRIIIa had a more favorable binding enthalpy, a less favorable binding entropy, and a slower off rate. Similar results were obtained from analyses of IgG1 molecules and an IgG1-Fc fragment produced by Expi293 cells. For further validation, we also prepared a maltose-binding protein-linked IgG1-Fc fragment (MBP-Fc). The binding enthalpy of MBP-Fc was nearly equal to that of the IgG1-Fc fragment for the interaction with FcγRIIIa, indicating that such alternatives to the Fab domains as MBP do not positively contribute to the IgG-FcγRIIIa interactions. Our investigation strongly suggests that the Fab region directly interacts with FcγRIIIa, resulting in an increase in the binding enthalpy and a decrease in the dissociation rate, at the expense of favorable binding entropy.

Using different proteolytic enzymes to digest antibody and its impact on stability of antibody mimetics

There are opportunities to formulate antibodies as solid-state depots for local therapy, which would minimise large systemic doses that are typically required. We have developed antibody mimetics known as Fab-PEG-Fab (FpF) that display similar binding affinity and functional activity as IgG antibodies. For head-to-head comparison between FpF and IgG, FpF is prepared from the Fabs obtained by enzymatic digestion of IgGs. Here, we report for the first time that using different enzymes to proteolytically digest IgG plays an important role in stability profile of the obtained Fabs leading in different stability profiles of the final conjugated product such as FpF. We prepared an anti-vascular endothelial growth factor (VEGF) FpF from either clinical Fab_rani (ranibizumab) or Fabs obtained by enzymatic digestion of bevacizumab (IgG) using immobilised papain and gingisKHANTM (KGP) enzyme. The stability of FpFs was then studied after being lyophilised in comparison with both ranibizumab and bevacizumab. Lyophilisation is being evaluated to produce solid material that can be used for depot fabrication. We observed that using immobilised papain to digest IgG resulted in the heterogenous isomers Fab leading to the preparation of heterogenous FpF_beva-papain mimetic that underwent aggregation during lyophilisation. However, using KGP enzyme generated a homogenous intact Fab_beva-KGP as determined by mass spectral analysis. Interestingly, the FpF mimetics prepared from the homogenous Fabs (Fab_rani and Fab_beva-KGP), displayed greater stability compared to their starting bevacizumab and ranibizumab after being lyophilised as determined by DLS analysis. There is a potential to lyophilize FpFs to be used to fabricate solid-state depots.

RNA delivery by extracellular vesicles in mammalian cells and its applications

The term 'extracellular vesicles' refers to a heterogeneous population of vesicular bodies of cellular origin that derive either from the endosomal compartment (exosomes) or as a result of shedding from the plasma membrane (microvesicles, oncosomes and apoptotic bodies). Extracellular vesicles carry a variety of cargo, including RNAs, proteins, lipids and DNA, which can be taken up by other cells, both in the direct vicinity of the source cell and at distant sites in the body via biofluids, and elicit a variety of phenotypic responses. Owing to their unique biology and roles in cell-cell communication, extracellular vesicles have attracted strong interest, which is further enhanced by their potential clinical utility. Because extracellular vesicles derive their cargo from the contents of the cells that produce them, they are attractive sources of biomarkers for a variety of diseases. Furthermore, studies demonstrating phenotypic effects of specific extracellular vesicle-associated cargo on target cells have stoked interest in extracellular vesicles as therapeutic vehicles. There is particularly strong evidence that the RNA cargo of extracellular vesicles can alter recipient cell gene expression and function. During the past decade, extracellular vesicles and their RNA cargo have become better defined, but many aspects of extracellular vesicle biology remain to be elucidated. These include selective cargo loading resulting in substantial differences between the composition of extracellular vesicles and source cells; heterogeneity in extracellular vesicle size and composition; and undefined mechanisms for the uptake of extracellular vesicles into recipient cells and the fates of their cargo. Further progress in unravelling the basic mechanisms of extracellular vesicle biogenesis, transport, and cargo delivery and function is needed for successful clinical implementation. This Review focuses on the current state of knowledge pertaining to packaging, transport and function of RNAs in extracellular vesicles and outlines the progress made thus far towards their clinical applications.

R409K mutation prevents acid-induced aggregation of human IgG4

Human immunoglobulin G isotype 4 (IgG4) antibodies are suitable for use in either the antagonist or agonist format because their low effector functions prevent target cytotoxicity or unwanted cytokine secretion. However, while manufacturing therapeutic antibodies, they are exposed to low pH during purification, and IgG4 is more susceptible to low-pH-induced aggregation than IgG1. Therefore, we investigated the underlying mechanisms of IgG4 aggregation at low pH and engineered an IgG4 with enhanced stability. By swapping the constant regions of IgG1 and IgG4, we determined that the constant heavy chain (CH3) domain is critical for aggregate formation, but a core-hinge-stabilizing S228P mutation in IgG4 is insufficient for preventing aggregation. To identify the aggregation-prone amino acid, we substituted the CH3 domain of IgG4 with that of IgG1, changing IgG4 Arg409 to a Lys, thereby preventing the aggregation of the IgG4 variant as effectively as in IgG1. A stabilizing effect was also recorded with other variable-region variants. Analysis of thermal stability using differential scanning calorimetry revealed that the R409K substitution increased the Tm value of CH3, suggesting that the R409K mutation contributed to the structural strengthening of the CH3-CH3 interaction. The R409K mutation did not influence the binding to antigens/human Fcγ receptors; whereas, the concurrent S228P and R409K mutations in IgG4 suppressed Fab-arm exchange drastically and as effectively as in IgG1, in both in vitro and in vivo in mice models. Our findings suggest that the IgG4 R409K variant represents a potential therapeutic IgG for use in low-effector-activity format that exhibits increased stability.

Proteoform-Resolved FcɤRIIIa Binding Assay for Fab Glycosylated Monoclonal Antibodies Achieved by Affinity Chromatography Mass Spectrometry of Fc Moieties

Fcɤ receptors (FcɤR) mediate key functions in immunological responses. For instance, FcɤRIIIa is involved in antibody-dependent cell-mediated cytotoxicity (ADCC). FcɤRIIIa interacts with the fragment crystallizable (Fc) of immunoglobulin G (IgG). This interaction is known to be highly dependent on IgG Fc glycosylation. Thus, the impact of glycosylation features on this interaction has been investigated in several studies by numerous analytical and biochemical techniques. FcɤRIIIa affinity chromatography (AC) hyphenated to mass spectrometry (MS) is a powerful tool to address co-occurring Fc glycosylation heterogeneity of monoclonal antibodies (mAbs). However, MS analysis of mAbs at the intact level may provide limited proteoform resolution, for example, when additional heterogeneity is present, such as antigen-binding fragment (Fab) glycosylation. Therefore, we investigated middle-up approaches to remove the Fab and performed AC-MS on the IgG Fc to evaluate its utility for FcɤRIIIa affinity assessment compared to intact IgG analysis. We found the protease Kgp to be particularly suitable for a middle-up FcɤRIIIa AC-MS workflow as demonstrated for the Fab glycosylated cetuximab. The complexity of the mass spectra of Kgp digested cetuximab was significantly reduced compared to the intact level while affinity was fully retained. This enabled a reliable assignment and relative quantitation of Fc glycoforms in FcɤRIIIa AC-MS. In conclusion, our workflow allows a functional separation of differentially glycosylated IgG Fc. Consequently, applicability of FcɤRIIIa AC-MS is extended to Fab glycosylated IgG, i.e., cetuximab, by significantly reducing ambiguities in glycoform assignment vs. intact analysis.

Modulating antibody-dependent cellular cytotoxicity of epidermal growth factor receptor-specific heavy-chain antibodies through hinge engineering

Human IgG1 and IgG3 antibodies (Abs) can mediate Ab-dependent cellular cytotoxicity (ADCC), and engineering of the Ab Fc (point mutation; defucosylation) has been shown to affect ADCC by modulating affinity for FcRγIIIa. In the absence of a C_H 1 domain, many camelid heavy-chain Abs (HCAbs) naturally bear very long and flexible hinge regions connecting their V_H H and C_H 2 domains. To better understand the influence of hinge length and structure on HCAb ADCC, we produced a series of hinge-engineered epidermal growth factor receptor (EGFR)-specific chimeric camelid V_H H-human Fc Abs and characterized their affinities for recombinant EGFR and FcRγIIIa, their binding to EGFR-positive tumor cells, and their ability to elicit ADCC. In the case of one chimeric HCAb (EG2-hFc), we found that variants bearing longer hinges (IgG3 or camelid hinge regions) showed dramatically improved ADCC in comparison with a variant bearing the human IgG1 hinge, in similar fashion to a variant with reduced C_H 2 fucosylation. Conversely, an EG2-hFc variant bearing a truncated human IgG1 upper hinge region failed to elicit ADCC. However, there was no consistent association between hinge length and ADCC for four similarly engineered chimeric HCAbs directed against distinct EGFR epitopes. These findings demonstrate that the ADCC of some HCAbs can be modulated simply by varying the length of the Ab hinge. Although this effect appears to be heavily epitope-dependent, this strategy may be useful to consider during the design of V_H H-based therapeutic Abs for cancer.

Engineering of the upper hinge region of human IgG1 Fc enhances the binding affinity to FcγIIIa (CD16a) receptor isoform

The interaction between antibodies and Immune cells surface FcγRIIIa (CD16a) receptor triggers a variety of immune responses including antibody-dependent cell-mediated cytotoxicity, antibody neutralization, phagocytosis, inflammation and tissue injury. Recent studies showed that IgG1 upper hinge region and FcγRs polymorphism play a major role in the interaction with Fcγ receptors and in the stability of the immune complex hence, in mounting strong inflammatory response. To further investigate this issue, we developed a tool box of IgG1 Fc isoforms to depict the affinity between mutated IgG1 Fc regions and extracellular domain variants (V158F) of CD16a. Our strategy consisted of designing different random upper-hinge mutated variants of IgG1 Fc domain, reproducing the naturally occurring two variants of CD16a and producing all of them as recombinant fusion proteins in Pichia Pastoris. The interactions were assayed using the Surface Plasmon Resonance (Biacore) method along with an in silico analysis to identify the major interaction and key residues that underline the affinity between the Fc region and CD16a variants. Our data showed that the affinity of the Fc region to the CD16a is strongly correlated to polar interactions. This molecular engineering approach yielded an IgG1Fc mutant with enhanced binding affinity to CD16a F158 variant.

Engineering the hinge region of human IgG1 Fc-fused bispecific antibodies to improve fragmentation resistance

Fc domain fusion can improve the therapeutic effects of relatively small biological molecules such as peptides, cytokines, and antibody fragments. Fc fusion proteins can also be used to enhance the cytotoxic effects of small bispecific antibodies (bsAbs). However, fragmentation of Fc fusion proteins, which mainly occurs around the hinge regions during production, storage, and circulation in the blood, is a major issue. In this study, we first investigated the mechanisms of fragmentation around the hinge region during storage using Fc-fused bsAbs with specificity for epidermal growth factor receptor and CD3 as a model. The fragmentation peaks generated by gel filtration analysis indicated that both contaminating proteases and dissolved active oxygen should be considered causes of fragmentation. We designed and constructed variants by introducing a point mutation into the upper hinge region, which reduced the cleavage caused by dissolved active oxygen, and shortened the hinge region to restrict access of proteases. These hinge modifications improved fragmentation resistance and did not affect the biological activity of the bsAbs in vitro. We confirmed the versatility of the hinge modifications using another Fc-fused bsAb. Our results show that hinge modifications to the Fc fusion protein, especially the introduction of a point mutation into the upper hinge region, can reduce fragmentation substantially, and these modifications can be used to improve the fragmentation resistance of other recombinant Fc fusion proteins.

An antibody with Fab-constant domains exchanged for a pair of CH3 domains

We have designed a complete antibody-like construct where the C_H1 and C_κ domains are exchanged for a pair of the C_H3 domains and efficient pairing of the heavy and light variable domain is achieved using “Knobs-into-Holes” strategy. This construct, composed of only naturally occurring immunoglobulin sequences without artificial linkers, expressed at a high level in mammalian cells, however exhibited low solubility. Rational mutagenesis aimed at the amino acid residues located at the interface of the variable domains and the exchanged C_H3 domains was applied to improve the biophysical properties of the molecule. The domain-exchanged construct, including variable domains of the HER2/neu specific antibody trastuzumab, was able to bind to the surface of the strongly HER2/neu positive cell line SK-BR3 4-fold weaker than trastuzumab, but could nevertheless incite a more potent response in an antibody-dependent cell cytotoxicity (ADCC) reporter assay with FcγRIIIa-overexpressing T-cells. This could be explained with a stronger binding to the FcγRIIIa. Importantly, the novel construct could mediate a specific ADCC effect with natural killer cells similar to the parental antibody.

An anti-TNF-α antibody mimetic to treat ocular inflammation

Infliximab is an antibody that neutralizes TNF-α and is used principally by systemic administration to treat many inflammatory disorders. We prepared the antibody mimetic Fab-PEG-Fab (FpF_infliximab) for direct intravitreal injection to assess whether such formulations have biological activity and potential utility for ocular use. FpF_infliximab was designed to address side effects caused by antibody degradation and the presence of the Fc region. Surface plasmon resonance analysis indicated that infliximab and FpF_infliximab maintained binding affinity for both human and murine recombinant TNF-α. No Fc mediated RPE cellular uptake was observed for FpF_infliximab. Both Infliximab and FpF_infliximab suppressed ocular inflammation by reducing the number of CD45+ infiltrate cells in the EAU mice after a single intravitreal injection at the onset of peak disease. These results offer an opportunity to develop and formulate for ocular use, FpF molecules designed for single and potentially multiple targets using bi-specific FpFs.

Fc-fusion mimetics

The Fc-fusion mimetic RpR 2̲ was prepared by disulfide bridging conjugation using PEG in the place of the Fc.

Rearranging the domain order of a diabody-based IgG-like bispecific antibody enhances its antitumor activity and improves its degradation resistance and pharmacokinetics

One approach to creating more beneficial therapeutic antibodies is to develop bispecific antibodies (bsAbs), particularly IgG-like formats with tetravalency, which may provide several advantages such as multivalent binding to each target antigen. Although the effects of configuration and antibody-fragment type on the function of IgG-like bsAbs have been studied, there have been only a few detailed studies of the influence of the variable fragment domain order. Here, we prepared four types of hEx3-scDb-Fc, IgG-like bsAbs, built from a single-chain hEx3-Db (humanized bispecific diabody [bsDb] that targets epidermal growth factor receptor and CD3), to investigate the influence of domain order and fusion manner on the function of a bsDb with an Fc fusion format. Higher cytotoxicities were observed with hEx3-scDb-Fcs with a variable light domain (VL)-variable heavy domain (VH) order (hEx3-scDb-Fc-LHs) compared with a VH-VL order, indicating that differences in the Fc fusion manner do not affect bsDb activity. In addition, flow cytometry suggested that the higher cytotoxicities of hEx3-scDb-Fc-LH may be attributable to structural superiority in cross-linking. Interestingly, enhanced degradation resistance and prolonged in vivo half-life were also observed with hEx3-scDb-Fc-LH. hEx3-scDb-Fc-LH and its IgG2 variant exhibited intense in vivo antitumor effects, suggesting that Fc-mediated effector functions are dispensable for effective anti-tumor activities, which may cause fewer side effects. Our results show that merely rearranging the domain order of IgG-like bsAbs can enhance not only their antitumor activity, but also their degradation resistance and in vivo half-life, and that hEx3-scDb-Fc-LHs are potent candidates for next-generation therapeutic antibodies.

Engineered protease-resistant antibodies with selectable cell-killing functions

Molecularly engineered antibodies with fit-for-purpose properties will differentiate next generation antibody therapeutics from traditional IgG1 scaffolds. One requirement for engineering the most appropriate properties for a particular therapeutic area is an understanding of the intricacies of the target microenvironment in which the antibody is expected to function. Our group and others have demonstrated that proteases secreted by invasive tumors and pathological microorganisms are capable of cleaving human IgG1, the most commonly adopted isotype among monoclonal antibody therapeutics. Specific cleavage in the lower hinge of IgG1 results in a loss of Fc-mediated cell-killing functions without a concomitant loss of antigen binding capability or circulating antibody half-life. Proteolytic cleavage in the hinge region by tumor-associated or microbial proteases is postulated as a means of evading host immune responses, and antibodies engineered with potent cell-killing functions that are also resistant to hinge proteolysis are of interest. Mutation of the lower hinge region of an IgG1 resulted in protease resistance but also resulted in a profound loss of Fc-mediated cell-killing functions. In the present study, we demonstrate that specific mutations of the CH2 domain in conjunction with lower hinge mutations can restore and sometimes enhance cell-killing functions while still retaining protease resistance. By identifying mutations that can restore either complement- or Fcγ receptor-mediated functions on a protease-resistant scaffold, we were able to generate a novel protease-resistant platform with selective cell-killing functionality.

Removal of a C-terminal serine residue proximal to the inter-chain disulfide bond of a human IgG1 lambda light chain mediates enhanced antibody stability and antibody dependent cell-mediated cytotoxicity

Optimization of biophysical properties is a critical success factor for the developability of monoclonal antibodies with potential therapeutic applications. The inter-domain disulfide bond between light chain (Lc) and heavy chain (Hc) in human IgG1 lends structural support for antibody scaffold stability, optimal antigen binding, and normal Fc function. Recently, human IgG1λ has been suggested to exhibit significantly greater susceptibility to reduction of the inter Lc-Hc disulfide bond relative to the same disulfide bond in human IgG1κ. To understand the molecular basis for this observed difference in stability, the sequence and structure of human IgG1λ and human IgG1κ were compared. Based on this Lc comparison, three single mutations were made in the λ Lc proximal to the cysteine residue, which forms a disulfide bond with the Hc. We determined that deletion of S214 (dS) improved resistance of the association between Lc and Hc to thermal stress. In addition, deletion of this terminal serine from the Lc of IgG1λ provided further benefit, including an increase in stability at elevated pH, increased yield from transient transfection, and improved in vitro antibody dependent cell-mediated cytotoxicity (ADCC). These observations support the conclusion that the presence of the terminal serine of the λ Lc creates a weaker inter-chain disulfide bond between the Lc and Hc, leading to slightly reduced stability and a potential compromise in IgG1λ function. Our data from a human IgG1λ provide a basis for further investigation of the effects of deleting terminal serine from λLc on the stability and function of other human IgG1λ antibodies.