A review of integrated advanced oxidation processes and biological processes for organic pollutant removal

Simultaneous removal of nitrate, manganese, zinc, and bisphenol a by a biofilm reactor with β-CD modified corn stover biochar and PU sponges: Performance and microbial community response

In the present study, a biofilm reactor with manganese (Mn) redox cycling was established to remove nitrate (NO3--N), bisphenol A (BPA), zinc (Zn(II)), and Mn(II) using β-cyclodextrin (β-CD) modified corn stover biochar (BC) and polyurethane sponges loaded with Cupriavidus sp. HY129 and Pantoea sp. MFG10. At C/N = 2.0, HRT = 6 h, Mn(II) = 10.0 mg L-1, and BPA and Zn(II) concentrations = 1.0 mg L-1, the removal efficiencies of NO3--N, Zn(II), BPA, and Mn(II) were 81.5%, 86.5%, 87.9%, and 75.5%, respectively. The outcomes demonstrated the success that the addition of β-CD could accelerate electron transfer activity and the denitrification process. The remediation of BPA and Zn(II) was mainly through the adsorption of bioprecipitation generated by reactor operation. The bioreactor could preserve the stability of the biological community and the expression of pertinent functional genes under the coercion of BPA and Zn(II).

Olive mill wastewater treatment strategies to obtain quality water for irrigation: A review

The olive mill industry is a relevant sector in the economy of Mediterranean countries, while it involves high consumption of water and the production of effluents with high environmental impact. The efficient treatment of olive mill wastewater (OMW) is of high relevance, particularly for these countries. Climate changes are leading to increasing periods of droughts, and water recovery from polluted streams is essential to ensure the sustainability of this scarce resource. A combination of various technologies involving physical, chemical, and biological processes has been developed for OMW treatment. However, the treatments studied have limitations such as the operation costs, difficulty of industrial scale-up, and the fact that the vast majority do not lead to suitable treated water for discharge/reuse. As such, it is urgent to develop a solution capable of efficiently treating this effluent, overcoming the disadvantages of existing processes to convert OMW from a serious environmental problem into a valuable source of water and nutrients. In this review, several studies based on the OMW treatment are critically discussed, from conventional approaches such as the physical (e.g. centrifugation, filtration, and adsorption) and biological (anaerobic digestion and anaerobic co-digestion) processes, to the most recent technologies such as advanced membrane filtration, advanced oxidation processes (AOPs) and sulfate radical based AOPs (SR-AOPs). Due to the complexity of the effluent, OMW cannot be efficiently treated by a single process, requiring a sequence of technologies before reaching the required characteristics for discharge into water courses or use in crop irrigation. Reviewing the published results in this matter, it seems that the sequence of processes encompassing ozonation, anaerobic digestion, and SR-AOPs could be the ideal combination for this purpose. However, membrane technologies may be necessary in the final stage of treatment so that the effluent meets legal discharge or irrigation limits.

A Comprehensive Review on Modification of Titanium Dioxide-Based Catalysts in Advanced Oxidation Processes for Water Treatment

It has become necessary to develop effective strategies to prevent and reduce water pollution as a result of the increase in dangerous pollutants in water reservoirs. Consequently, there is a need to design new catalyst materials to promote the efficiency of advanced oxidation processes (AOPs) in the field of wastewater treatment plant to ensure the mineralization of trace organic contaminants. A notable approach gaining attention involves the coupling of sulfate radicals-based AOPs to photocatalysis or electrocatalysis processes, aiming to achieve the complete removal of refractory contaminants into water and carbon dioxide. Titanium dioxide as metal oxide has received great attention for its catalytic application in water purification. TiO2 catalysts offer a multitude of advantages in AOPs. They are characterized by their high photocatalytic activity under both ultraviolet and visible light, making them environmentally friendly due to the absence of toxic byproducts during oxidation. Their versatility is remarkable, finding utility in various AOPs, from photocatalysis to photo-Fenton processes. TiO2's durability ensures long-lasting catalytic activity, which is crucial for continuous treatment processes, and their cost-effectiveness is particularly advantageous. Furthermore, their chemical stability allows it to withstand varying pH conditions. However, the large band gap energy and low electrical conductivity hinder the catalytic reaction effectiveness. This review aims to examine various approaches to enhance the catalytic performance of titanium dioxide, with the objective of enabling more efficient water purification methods.

Advanced oxidation and biological integrated processes for pharmaceutical wastewater treatment: A review

The stress of pharmaceutical and personal care products (PPCPs) discharging to water bodies and the environment due to increased industrialization has reduced the availability of clean water. This poses a potential health hazard to animals and human life because water contamination is a great issue to the climate, plants, humans, and aquatic habitats. Pharmaceutical compounds are quantified in concentrations ranging from ng/Lto μg/L in aquatic environments worldwide. According to (Alsubih et al., 2022), the concentrations of carbamazepine, sulfamethoxazole, Lutvastatin, ciprofloxacin, and lorazepam were 616-906 ng/L, 16,532-21635 ng/L, 694-2068 ng/L, 734-1178 ng/L, and 2742-3775 ng/L respectively. Protecting and preserving our environment must be well-driven by all sectors to sustain development. Various methods have been utilized to eliminate the emerging pollutants, such as adsorption and biological and advanced oxidation processes. These methods have their benefits and drawbacks in the removal of pharmaceuticals. Successful wastewater treatment can save the water bodies; integrating green initiatives into the main purposes of actor firms, combined with continually periodic awareness of the current and potential implications of environmental/water pollution, will play a major role in water conservation. This article reviews key publications on the adsorption, biological, and advanced oxidation processes used to remove pharmaceutical products from the aquatic environment. It also sheds light on the pharmaceutical adsorption capability of adsorption, biological and advanced oxidation methods, and their efficacy in pharmaceutical concentration removal. A research gap has been identified for researchers to explore in order to eliminate the problem associated with pharmaceutical wastes. Therefore, future study should focus on combining advanced oxidation and adsorption processes for an excellent way to eliminate pharmaceutical products, even at low concentrations. Biological processes should focus on ideal circumstances and microbial processes that enable the simultaneous removal of pharmaceutical compounds and the effects of diverse environments on removal efficiency.

Glucose driven self-sustained electro-Fenton platform for remediation of 2,4-dichlorophenoxy herbicide contaminated water

As electrochemical oxidation technologies are energy-intensive, they are sparsely included in wastewater treatment plants. This study demonstrates a self-reliable glucose driven-electro-Fenton (GD-EF) system for decontamination of 2,4-dichlorophenoxy (2,4-D) herbicides without the supply of external current or voltage. It incorporates a cathode (graphite) which accepts electrons from abiotic glucose oxidation at anode (Pt/Ti or BDD or PbO2/Cu/Ti) and generates in situ H2O2. For the first time, the ability of Pt/Ti, BDD, and PbO2/Cu/Ti anodes in GD-EF and their influence on 2,4-D decontamination rate have been studied. Pt/Ti and PbO2/Cu/Ti exhibited maximum power densities of 60.42 and 219.3 µW cm-2, respectively than BDD (2.418 µW cm-2). Even though Pt/Ti fuel cell exhibited lower power density than the PbO2/Cu/Ti - fuel cell, it had a faster 2,4-D degradation rate of k = 18 × 10-3 s-1. The generated cathodic potential of -0.275 mV vs. Ag/AgCl in the Pt/Ti-fuel cell was sufficient to produce 23 mg L-1h-1 of H2O2. The high performance liquid chromatography analysis reveals the complete transformation of 2,4-D in 540 min and its degradation by 95% in 1080 min. This finding paves the way for greener decontamination of bio-recalcitrant herbicides with zero electrochemical energy consumption.

A study on managing plastic waste to tackle the worldwide plastic contamination and environmental remediation

Over the past 50 years, the emergence of plastic waste as one of the most urgent environmental problems in the world has given rise to several proposals to address the rising levels of contaminants associated with plastic debris. Worldwide plastic production has increased significantly over the last 70 years, reaching a record high of 359 million tonnes in 2020. China is currently the world's largest plastic producer, with a share of 17.5%. Of the total marine waste, microplastics account for 75%, while land-based pollution accounts for responsible for 80-90%, and ocean-based pollution 10-20% only in overall pollution problems. Even at small dosages (10 μg/mL), microplastics have been found to cause toxic effects on human and animal health. This review examines the sources of microplastic contamination, the prevalent reaches of microplastics, their impacts, and the remediation methods for microplastic contamination. This review explains the relationship between the community composition and the presence of microplastic particulate matter in aquatic ecosystems. The interaction between microplastics and emerging pollutants, including heavy metals, has been linked to enhanced toxicity. The review article provided a comprehensive overview of microplastic, including its fate, environmental toxicity, and possible remediation strategies. The results of our study are of great value as they illustrate a current perspective and provide an in-depth analysis of the current status of microplastics in development, their test requirements, and remediation technologies suitable for various environments.

Facile fabrication of plasmonic Ag/ZIF-8: an efficient catalyst for investigation of antibacterial, haemolytic and photocatalytic degradation of antibiotics

Present article represents the fabrication of plasmonic Ag/ZIF-8 composite and its effect on antibacterial, haemolytic and photocatalytic degradation of antibiotics. Ag/ZIF-8 was prepared by varying molar concentrations (1 mM, 2.5 mM, and 5 mM) of AgNO3 into ZIF-8 using NaBH4 as a reducing agent by the sol-gel process. The material was then characterised using the XRD, XPS, FTIR, SEM, HRTEM, UVDRS, BET and EIS techniques. When it comes to breaking down the antibiotic CIP, the optimised Ag2.5/ZIF-8 exhibits the strongest photocatalytic capability, with a degradation efficiency of 82.3% after 90 minutes. Due to LSPR (Localised Surface Plasmon Resonance) as well as the efficient movement and separation of the interfaces of photo-generated charge carriers in Ag2.5/ZIF-8 may be the causes of this increase in photocatalytic degradation. The effect of several parameters, such as pH, a variety of catalysts, varying dose concentrations, scavenging and sustainability are being investigated. The para benzoquinone (OH˙) and citric acid (h+) the primary active species in the photocatalytic breakdown pathway, according to trapping study. Whereas, Ag5/ZIF-8 was optimised for greater antibacterial activity against S. aureus and E. coli due to the synergistic impact of Ag+ and Zn2+ in Ag5/ZIF-8 and in haemolytic experiment, all samples were discovered to be non-toxic to blood cells. Overall, the synthesised compound was discovered to be a reusable, affordable catalyst for water remediation that can also be used in biomedicine.

Exploring the role of microbes for the management of persistent organic pollutants

Persistent organic pollutants (POPs) are chemicals which have been persisting in the environment for many years due to their longer half-lives. POPs have gained attention over the last few decades due to the unsustainable management of chemicals which led to their widespread and massive contamination of biota from different strata and environments. Due to the widespread distribution, bio-accumulation and toxic behavior, POPs have become a risk for organisms and environment. Therefore, a focus is required to eliminate these chemicals from the environment or transform into non-toxic forms. Among the available techniques for the removal of POPs, most of them are inefficient or incur high operational costs. As an alternative to this, microbial bioremediation of POPs such as pesticides, polycyclic aromatic hydrocarbons, polychlorinated biphenyls, pharmaceuticals and personal care products is much more efficient and cost-effective. Additionally, bacteria play a vital role in the biotransformation and solubilization of POPs, which reduces their toxicity. This review specifies the Stockholm Convention that evaluates the risk profile for the management of existing as well as emerging POPs. The sources, types and persistence of POPs along with the comparison of conventional elimination and bioremediation methods of POPs are discussed comprehensively. This study demonstrates the existing bioremediation techniques of POPs and summaries the potential of microbes which serve as enhanced, cost-effective, and eco-friendly approach for POPs elimination.

Insights into the mechanism of persulfate activation with carbonated waste metal adsorbed resin for the degradation of 2,4-dichlorophenol

Superabsorbent resin (SAR) saturated with heavy metals poses a threat to surrounding ecosystem. To promote the reutilization of waste, resins adsorbed by Fe²⁺ and Cu²⁺ were carbonized and used as catalysts (Fe@C/Cu@C) to activate persulfate (PS) for 2,4-dichlorophenol (2,4-DCP) degradation. The heterogeneous catalytic reaction was mainly responsible for 2,4-DCP removal. The synergistic effect of Fe@C and Cu@C was propitious to 2,4-DCP degradation. Fe@C/Cu@C with a ratio of 2:1 showed the highest performance of 2,4-DCP removal. 40 mg/L 2,4-DCP was completely removed within 90 min under reaction conditions of 5 mM PS, pH = 7.0 and T = 25 °C. The cooperation of Fe@C and Cu@C facilitated the redox cycling of Fe and Cu species to supply accessible PS activation sites, enhancing ROS generation for 2,4-DCP degradation. Carbon skeleton enhanced 2,4-DCP removal via radical/nonradical oxidation pathways and via its adsorption to 2,4-DCP. SO₄˙-, HO˙ and O₂^•- were the dominate radical species involved in 2,4-DCP destruction. Meanwhile, the possible pathways of 2,4-DCP degradation were proposed based on GC-MS. Finally, recycling tests proved catalysts exhibited recyclable stability. Aiming to resource utilization, Fe@C/Cu@C with satisfactory catalysis and stability, is promising catalyst for contaminated water treatment.

Biological and green remediation of heavy metal contaminated water and soils: A state-of-the-art review

Contamination of the natural ecosystem by heavy metals, organic pollutants, and hazardous waste severely impacts on health and survival of humans, animals, plants, and microorganisms. Diverse chemical and physical treatments are employed in many countries, however, the acceptance of these treatments are usually poor because of taking longer time, high cost, and ineffectiveness in contaminated areas with a very high level of metal contents. Bioremediation is an eco-friendly and efficient method of reclaiming contaminated soils and waters with heavy metals through biological mechanisms using potential microorganisms and plant species. Considering the high efficacy, low cost, and abundant availability of biological materials, particularly bacteria, algae, yeasts, and fungi, either in natural or genetically engineered (GE) form, bioremediation is receiving high attention for heavy metal removal. This report comprehensively reviews and critically discusses the biological and green remediation tactics, contemporary technological advances, and their principal applications either in-situ or ex-situ for the remediation of heavy metal contamination in soil and water. A modified PRISMA review protocol is adapted to critically assess the existing research gaps in heavy metals remediation using green and biological drivers. This study pioneers a schematic illustration of the underlying mechanisms of heavy metal bioremediation. Precisely, it pinpoints the research bottleneck during its real-world application as a low-cost and sustainable technology.

Comprehensive understanding of electrochemical treatment systems combined with biological processes for wastewater remediation

The presence of toxic pollutants in wastewater discharge can affect the environment negatively due to presence of the organic and inorganic contaminants. The application of the electrochemical process in wastewater treatment is promising, specifically in treating these harmful pollutants from the aquatic environment. This review focused on recent applications of the electrochemical process for the remediation of such harmful pollutants from aquatic environments. Furthermore, the process conditions that affect the electrochemical process performance are evaluated, and the appropriate treatment processes are suggested according to the presence of organic and inorganic contaminants. Electrocoagulation, electrooxidation, and electro-Fenton applications in wastewater have shown effective performance with high removal rates. The disadvantages of these processes are the formation of toxic intermediate metabolites, high energy consumption, and sludge generation. To overcome such disadvantages combined ecotechnologies can be applied in large-scale wastewater pollutants removal. The combination of electrochemical and biological treatment has gained importance, increased removal performance remarkably, and decreased operational costs. The critical discussion with depth information in this review could be beneficial for wastewater treatment plant operators throughout the world.

Microplastic remediation technologies in water and wastewater treatment processes: Current status and future perspectives

Microplastics (MPs) are a type of contaminants produced during the use and disposal of plastic products, which are ubiquitous in our lives. With the high specific surface area and strong hydrophobicity, MPs can adsorb various hazardous microorganisms and chemical contaminants from the environment, causing irreversible damage to our humans. It is reported that the MPs have been detected in infant feces and human blood. Therefore, the presence of MPs has posed a significant threat to human health. It is critically essential to develop efficient, scalable and environmentally-friendly methods to remove MPs. Herein, recent advances in the MPs remediation technologies in water and wastewater treatment processes are overviewed. Several approaches, including membrane filtration, adsorption, chemically induced coagulation-flocculation-sedimentation, bioremediation, and advanced oxidation processes are systematically documented. The characteristics, mechanisms, advantages, and disadvantages of these methods are well discussed and highlighted. Finally, the current challenges and future trends of these methods are proposed, with the aim of facilitating the remediation of MPs in water and wastewater treatment processes in a more efficient, scalable, and environmentally-friendly way.

Regeneration of granular activated carbon clogged in the treatment of leachates

Landfill leachates are highly contaminated liquids and complex to treat. Two of the processes which are promising for the treatment are the advanced oxidation and adsorption methods. With the combination of the Fenton and adsorption methods, practically all the organic load of leachates can be removed; however, this combination of processes is limited due to the soon clogging of adsorbent material, which leads to high operation costs. In the present work, the results of the regeneration of clogged activated carbon are shown after the application of the Fenton/adsorption process in leachates. This research consisted of four stages: sampling and leachate characterization, clogging of the carbon through the Fenton/adsorption process, carbon regeneration through the oxidative Fenton process, and lastly, evaluation of regenerated carbon adsorption through jar and column tests. In the experiments, HCl 3 M was used, and different concentration of hydrogen peroxide (0.15 M, 0.2 M, 0.25 M) were tested at different times (16 h and 30 h). The activated carbon regeneration through the Fenton process and the optimal peroxide dosage was 0.15 M for 16 h. The regeneration efficiency was obtained from comparing the adsorption efficiency between regenerated and virgin carbon, reaching 98.27% and can be applied up to 4 times without losing regeneration efficiency. These results prove that it is possible to restore the clogged activated carbon adsorption capacity during the Fenton/adsorption process.

Coupling of Fenton reaction and white rot fungi for the degradation of organic pollutants

Advanced oxidation processes (AOPs) are a class of highly efficient pollution remediation technologies that produce oxidising radicals under specific conditions to degrade organic pollutants. The Fenton reaction is a commonly applied AOP. To combine the advantages of AOPs and biodegradation in the remediation of organic pollutants, some studies have developed coupled systems between Fenton AOPs and white rot fungi (WRF) for environmental organic pollutant remediation and have achieved some success. Moreover, a promising system, termed as advanced bio-oxidation processes (ABOPs), mediated by the quinone redox cycling of WRF, has attracted increasing attention in the field. In this ABOP system, the radicals and H₂O₂ produced through the quinone redox cycling of WRF can strengthen Fenton reaction. Meanwhile, in this process, the reduction of Fe³⁺ to Fe²⁺ ensures the maintenance of Fenton reaction, leading to a promising application potential for the remediation of environmental organic pollutants. ABOPs combine the advantages of bioremediation and advanced oxidation remediation. Further understanding the coupling of Fenton reaction and WRF in the degradation of organic pollutants will be of great significance for the remediation of organic pollutants. Therefore, in this study, we reviewed recent remediation techniques for organic pollutants involving the coupled application of WRF and the Fenton reaction, focusing on the application of new ABOPs mediated by WRF, and discussed the reaction mechanism and conditions of ABOPs. Finally, we discussed the application prospects and future research directions of the joint application of WRF and advanced oxidation technologies for the remediation of environmental organic pollutants.

Applications of biochar in sulfate radical-based advanced oxidation processes for the removal of pharmaceuticals and personal care products

Recently, biochar (BC) has been increasingly used as a catalyst for the degradation of 'emerging pollutants' (EPs). Pharmaceuticals and personal care products (PPCPs), which come under 'EPs', can be harmful to the aquatic ecosystem despite being present in very low concentrations (ng/L-μg/L). Advanced oxidation processes (AOPs), which produce sulfate radical (SR-AOPs), show a great potential to degrade PPCPs effectively from wastewater. It is mainly due to the higher stability, long half-lives and better non-selectivity of SO₄^{• -} compared with AOPs with •OH generation. Furthermore, research focus is now given on AOPs coupled with BC-supported catalyst to enhance the degradation of PPCPs because of quicker generation of radicals (•OH, SO₄^•-) by the activation of persulfate (PS) and peroxymonosulfate (PMS). This article sheds light on the catalytic ability of BC after its physical and chemical modifications such as acid/alkali treatment and metal doping. The role of persistent free radicals (PFRs) in the BC for effective removal of PPCPs has been elaborated. Its potential applications in synthetic as well as real wastewater have also been discussed.

Electrochemical-based approaches for the treatment of forever chemicals: Removal of perfluoroalkyl and polyfluoroalkyl substances (PFAS) from wastewater

Electrochemical based approaches for the treatment of recalcitrant water borne pollutants are known to exhibit superior function in terms of efficiency and rate of treatment. Considering the stability of Perfluoroalkyl and polyfluoroalkyl substances (PFAS) are designated as forever chemicals, which generating from various industrial activities. PFAS are contaminating the environment in small concentrations, yet exhibit severe environmental and health impacts. Electro-oxidation (EO) is a recent development that treats PFAS, in which different reactive species generates at anode due to oxidative reaction and reductive reactions at the cathode. Compared to water and wastewater treatment methods those being implemented, electrochemical approaches demonstrate superior function against PFAS. EO completely mineralizes (almost 100 %) non-biodegradable organic matter and eliminate some of the inorganic species, which proven as a robust and versatile technology. Electrode materials, electrolyte concentration pH and the current density applying for electrochemical processes determine the treatment efficiency. EO along with electrocoagulation (EC) treats PFAS along with other pollutants from variety of industries showed highest degradation of 7.69 mmol/g of PFAS. Integrated approach with other processes was found to exhibit improved efficiency in treating PFAS using several electrodes boron-doped diamond (BDD), zinc, titanium and lead based with efficiency the range of 64 to 97 %.

Al/TiO2 composite as a photocatalyst for the degradation of organic pollutants

TiO₂ is a catalyst that can effectively degrade organic pollutants with the following advantages, low cost, simplicity, and pollution-free nature. In recent years, the non-noble plasmonic metal Al has effectively improved the photocatalytic performance of TiO₂. However, the current reports are limited to the photocatalytic performance of Al/TiO₂ on the substrate, which requires expensive large-scale vacuum equipment. In this study, monodispersed Al particles were proposed to enhance the photocatalysis of TiO₂. The localized surface plasmon resonance (LSPR) effect of Al is proven by finite difference time domain method (FDTF) simulation. Then, Al/TiO₂ composites were prepared by combining monodispersed Al and TiO₂. The influence of ligand (glutathione (GSH), glutamic acid (GAG), or 3-mercaptopropane acid (MPA)), Al size (40 to 300 nm), and the ratio of Al to TiO₂ (0.5:1 to 10:1) on the photocatalytic degradation of methylene blue (MB) by Al/TiO₂ were discussed. The obtained results showed that the Al/TiO₂ composite which were prepared with 200 nm Al particles, GSH as the ligand bridge, and an Al:TiO₂ ratio of 1:1 had the best MB degradation effect. It can degrade 97.7% of 10 mg/L MB in 100 min. The reaction rate of the Al/TiO₂ composite with the optimal photocatalytic performance is k=3.36×10^-2 min^-1, which is 10 times that of P25 TiO₂. In addition, Al/TiO₂ has a good photocatalytic effect on rhodamine B (RhB) and crystal violet (CV). Therefore, Al/TiO₂ composites with the advantage of high efficiency are a type of potential photocatalytic material that can be used for the photocatalytic treatment of organic pollutants in water.

Paraben Compounds—Part II: An Overview of Advanced Oxidation Processes for Their Degradation

Water scarcity represents a problem for billions of people and is expected to get worse in the future. To guarantee people’s water needs, the use of “first-hand water” or the reuse of wastewater must be done. Wastewater treatment and reuse are favorable for this purpose, since first-hand water is scarce and the economic needs for the exploration of this type of water are increasing. In wastewater treatment, it is important to remove contaminants of emerging concern, as well as pathogenic agents. Parabens are used in daily products as preservatives and are detected in different water sources. These compounds are related to different human health problems due to their endocrine-disrupting behavior, as well as several problems in animals. Thus, their removal from water streams is essential to achieve safe reusable water. Advanced Oxidation Processes (AOPs) are considered very promising technologies for wastewater treatment and can be used as alternatives or as complements of the conventional wastewater treatments that are inefficient in the removal of such contaminants. Different AOP technologies such as ozonation, catalytic ozonation, photocatalytic ozonation, Fenton’s, and photocatalysis, among others, have already been used for parabens abatement. This manuscript critically overviews several AOP technologies used in parabens abatement. These treatments were evaluated in terms of ecotoxicological assessment since the resulting by-products of parabens abatement can be more toxic than the parent compounds. The economic aspect was also analyzed to evaluate and compare the considered technologies.