Antifouling properties of zinc oxide nanorod coatings

Nanomaterial grafted polymorphous activated carbon cloth surface for antibacterial, capacitive deionization and oil spill cleaning applications

This work reports the development of multifunctional or polymorphous surfaces using zinc oxide (ZnO) nanorods, silica (SiO2), and fluoropolymer functionalization in a sequential process. Firstly, zinc oxide nanorods were grown on activated carbon cloth (ACC) using a simple low-temperature synthesis process. ZnO nanorods-coated ACC substrate was applied to investigate the antimicrobial properties, and the results showed inhibition of 50% for Escherichia coli (E.coli) and 55% for Bacillus subtilis (B.subtilis) over 48 h of incubation time. Subsequent in-situ modification of silica nanoparticles like layer on ZnO nanorods-coated ACC surface was developed and used as an electrode for brackish water desalination in a capacitive deionization system. ZnO-SiO2 modified ACC surface enhanced the desalination efficiency by 1.6 times, the salt removal rate (SRR) by threefold, and the durability (fouling prevention) for long-term usage compared to pristine ACC. Further modification of the ZnO-SiO2-ACC surface using fluoropolymer rendered the surface superhydrophobic and oleophilic. Vegetable (1.4 g/g) and crude oil (1.6 g/g) adsorption capacities were achieved for modified surface which was 70% enhancement compared with pristine ACC. The dynamic oil spill adsorption test exhibited the complete removal of oil spills on water surfaces within a few seconds, suggesting a potential application in oil spill cleaning.

"Omics" Techniques Used in Marine Biofouling Studies

Biofouling is the growth of organisms on wet surfaces. Biofouling includes micro- (bacteria and unicellular algae) and macrofouling (mussels, barnacles, tube worms, bryozoans, etc.) and is a major problem for industries. However, the settlement and growth of some biofouling species, like oysters and corals, can be desirable. Thus, it is important to understand the process of biofouling in detail. Modern "omic" techniques, such as metabolomics, metagenomics, transcriptomics, and proteomics, provide unique opportunities to study biofouling organisms and communities and investigate their metabolites and environmental interactions. In this review, we analyze the recent publications that employ metagenomic, metabolomic, and proteomic techniques for the investigation of biofouling and biofouling organisms. Specific emphasis is given to metagenomics, proteomics and publications using combinations of different "omics" techniques. Finally, this review presents the future outlook for the use of "omics" techniques in marine biofouling studies. Like all trans-disciplinary research, environmental "omics" is in its infancy and will advance rapidly as researchers develop the necessary expertise, theory, and technology.

Ecological disturbances and abundance of anthropogenic pollutants in the aquatic ecosystem: Critical review of impact assessment on the aquatic animals

Anthropogenic toxins are discharged into the environment and distributed through a variety of environmental matrices. Trace contaminant detection and analysis has advanced dramatically in recent decades, necessitating further specialized technique development. These pollutants can be mobile and persistent in small amounts in the environment, and ecological receptors will interact with it. Despite the fact that few researches have been undertaken on invertebrate exposure, accumulation, and biological implications, it is apparent that a wide range of pollutants can accumulate in the tissues of aquatic insects, earthworms, amphipod crustaceans, and mollusks. Due to long-term stability during long-distance transit, a number of chemical and microbiological agents that were not previously deemed pollutants have been found in various environmental compartments. The uptake of such pollutants by the aquatic organism is done through the process of bioaccumulation when dangerous compounds accumulate in living beings while biomagnification is the process of a pollutant becoming more hazardous as it moves up the trophic chain. Organic and metal pollution harms animals of every species studied so far, from bacteria to phyla in between. The environmental protection agency says these poisons harm humans as well as a variety of aquatic organisms when the water quality is sacrificed in typical wastewater treatment systems. Contrary to popular belief, treated effluents discharged into aquatic bodies contain considerable levels of Anthropogenic contaminants. This evolution necessitates a more robust and recent advancement in the field of remediation and their techniques to completely discharge the various organic and inorganic contaminants.

Bioinspired Interfacial Spontaneous Growth of ZnO Nanocatalysts onto Recycled Textiles as a Sustainable Approach for Water Purification

Zinc oxide, as a commonly used photocatalytic degradation of organic pollutants, typically shows limitations in wastewater treatment, such as aggregation and recycling problems caused by nanoscale dimensions and inappropriate substrates. Anchoring ZnO on substrates is a strategy to obtain stable catalytic performance. Particularly, natural fibers with hollow structures are an attractive alternative for ecological and economical ZnO loading templates, but depositing ZnO onto hollowed fiber surfaces presents a challenge. Here, a straightforward in situ growth method for producing nanostructured zinc oxide on cotton fibers from recycled garments is reported. The modified polydopamine on the fiber surface captures the catalyst required for in situ growth of ZnO and serves as a platform for spontaneous catalytic crystal growth on the fiber surface. The ZnO nanocrystals are uniformly dispersed on the outer and inner walls of cotton fibers, demonstrating excellent durability in wastewater treatments. Moreover, the photocatalytic performance of functional fibers is optimized by doping Ag nanoparticles to improve degradation efficiency. This can extend the prospect of further applications of developed ZnO/fibers in optoelectronics, spintronics, and provide inspiration for recycling and upgrading of used garments.

Nanotechnology: the Alternative and Efficient Solution to Biofouling in the Aquaculture Industry

Biofouling is a global issue in aquaculture industries. It adversely affects marine infrastructure (ship's hulls, mariculture cages and nets, underwater pipes and filters, building materials, probes, and sensor devices). The estimated cost of managing marine biofouling accounts for 5-10% of production cost. Non-toxic foul-release coating and biocide-based coating are the two current approaches. Recent innovation and development of a surface coating with nanoparticles such as photocatalytic zinc oxide nanocoating on fishing nets, copper oxide nanocoating on the water-cooling system, and silver nanoparticle coating to inhibit microalgal adhesion on submerged surfaces under natural light (photoperiod) could present meaningful anti-biofouling application. Nanocoating of zinc, copper, and silver oxide is an environmentally friendly surface coating strategy that avoid surface adhesion of bacteria, diatoms, algal, protozoans, and fungal species. Such nanocoating could also provide a solution to strains tolerant to Cu, Zn, and Ag. This draft of the special issue demonstrates the anti-biofouling potential of various metal and metal oxide nanoparticle coating to combat aquaculture industry biofouling problems.

Effective Antibacterial/Photocatalytic Activity of ZnO Nanomaterials Synthesized under Low Temperature and Alkaline Conditions

The purpose of this study was to evaluate the surface properties of ZnO nanomaterials based on their ability to photodegrade methyl blue dye (MB) and to show their antibacterial properties against different types of Gram-positive bacteria (Bacillus manliponensis, Micrococcus luteus, Staphylococcus aureus) and Gram-negative bacteria (Escherichia coli). In this study, ZnO nanomaterials were synthesized rapidly and easily in the presence of 1-4 M NaOH at a low temperature of 40 °C within 4 h. It was found that the ZnO nanomaterials obtained from the 1.0 M (ZnO-1M) and 2.0 M (ZnO-2M) aqueous solutions of NaOH had spherical and needle-shaped forms, respectively. As the concentration of NaOH increased, needle thickness increased and the particles became rod-like. Although the ZnO nanomaterial shapes were different, the bandgap size remained almost unchanged. However, as the NaOH concentration increased, the energy position of the conduction band shifted upward. Photo current curves and photoluminescence intensities suggested that the recombination between photoexcited electrons and holes was low in the ZnO-4M materials prepared in 4.0 M NaOH solution; however, charge transfer was easy. ∙O₂^- radicals were generated more than ∙OH radicals in ZnO-4M particles, showing stronger antibacterial activity against both Gram-positive and Gram-negative bacteria and stronger decomposition ability on MB dye. The results of this study suggest that on the ZnO nanomaterial surface, ∙O₂^- radicals generated are more critical for antibacterial activity than particle shape.

Theoretical insights into the degradation of swep by hydroxyl radicals in atmosphere and water environment: Mechanisms, kinetics and toxicity

As an excellent conductive herbicide, swep is widely used in weed removal. Its remaining in atmosphere and water can not only contaminate the environment but also pose a threat to human health. This work presented a systematic theoretical study of HO^•-mediated degradation mechanisms and kinetics of swep in atmosphere and water environment. HO^•-addition reaction was the dominant reaction type and the main degradation products N-(3-chloro-4-hydroxyphenyl)carbamate (P2), N-(3,4-chloro-6-hydroxyphenyl)carbamate (P3) and N-(3,4-chloro-2-hydroxyphenyl)carbamate (P11) were in good agreement with the experimental results. The total rate constants of swep with HO^• were determined to be 3.37 × 10^-12 and 7.73 × 10^-12 cm³ molecule^-1 s^-1 (at 298 K) in atmosphere and water environment, respectively. As an excellent adsorbent and photocatalyst, zinc oxide (ZnO) was selected to study the adsorption and catalytic degradation mechanism of swep. The adsorption configuration of (ZnO)_n clusters with swep was most stable when n = 6. The adsorption of (ZnO)₆ cluster was more favorable to the H-atom abstraction reaction. The toxicities of swep and its degradation products to aquatic organisms were predicted. The degradation of swep induced by HO^• was beneficial to the survival of aquatic organisms. This work would provide a comprehensive theoretical basis for understanding the degradation behavior of organic pollutants.

3D Printed Metal Oxide-Polymer Composite Materials for Antifouling Applications

Current technology to prevent biofouling usually relies on the use of toxic, biocide-containing materials, which can become a serious threat to marine ecosystems, affecting both targeted and nontargeted organisms. Therefore, the development of broad-spectrum, less toxic antifouling materials is a challenge for researchers; such materials would be quite important in applications like aquaculture. In this respect, surface chemistry, physical properties, durability and attachment scheme can play a vital role in the performance of the materials. In this work, acrylonitrile butadiene styrene (ABS)/micro ZnO or nano ZnO composite lattices with different metal oxide contents were developed using 3D printing. Their antifouling behavior was examined with respect to aquaculture applications by monitoring growth on them of the diatoms Navicula sp. and the monocellular algae Chlorella sp. with image analysis techniques. As shown, the presence of metal oxides in the composite materials can bring about antifouling ability at particular concentrations. The present study showed promising results, but further improvements are needed.

Current advancements on the fabrication, modification, and industrial application of zinc oxide as photocatalyst in the removal of organic and inorganic contaminants in aquatic systems

Industrial wastewaters contain hazardous contaminants that pollute the environment and cause socioeconomic problems, thus demanding the employment of effective remediation procedures such as photocatalysis. Zinc oxide (ZnO) nanomaterials have emerged to be a promising photocatalyst for the removal of pollutants in wastewater owing to their excellent and attractive characteristics. The dynamic tunable features of ZnO allow a wide range of functionalization for enhanced photocatalytic efficiency. The current review summarizes the recent advances in the fabrication, modification, and industrial application of ZnO photocatalyst based on the analysis of the latest studies, including the following aspects: (1) overview on the properties, structures, and features of ZnO, (2) employment of dopants, heterojunction, and immobilization techniques for improved photodegradation performance, (3) applicability of suspended and immobilized photocatalytic systems, (4) application of ZnO hybrids for the removal of various types of hazardous pollutants from different wastewater sources in industries, and (5) potential of bio-inspired ZnO hybrid nanomaterials for photocatalytic applications using renewable and biodegradable resources for greener photocatalytic technologies. In addition, the knowledge gap in this field of work is also highlighted.

Nanocoating Is a New Way for Biofouling Prevention

Biofouling is a major concern to the maritime industry. Biofouling increases fuel consumption, accelerates corrosion, clogs membranes and pipes, and reduces the buoyancy of marine installations, such as ships, platforms, and nets. While traditionally marine installations are protected by toxic biocidal coatings, due to recent environmental concerns and legislation, novel nanomaterial-based anti-fouling coatings are being developed. Hybrid nanocomposites of organic-inorganic materials give a possibility to combine the characteristics of both groups of material generating opportunities to prevent biofouling. The development of bio-inspired surface designs, progress in polymer science and advances in nanotechnology is significantly contributing to the development of eco-friendly marine coatings containing photocatalytic nanomaterials. The review mainly discusses photocatalysis, antifouling activity, and formulation of coatings using metal and metal oxide nanomaterials (nanoparticles, nanowires, nanorods). Additionally, applications of nanocomposite coatings for inhibition of micro- and macro-fouling in marine environments are reviewed.

A comparative study between two novel silicone/graphene-based nanostructured surfaces for maritime antifouling

Two novel superhydrophobic nanocomposite series of polydimethylsiloxane (PDMS) enriched with reduced graphene oxide (RGO) and graphene oxide/boehmite nanorods (GO-γ-AlOOH) nanofillers were synthesized as maritime fouling-release (FR) surfaces. Controlling the nanofillers' structures and distribution in the silicone matrix influenced the self-cleaning and antifouling properties. γ-AlOOH nanorods had a single crystallinity with an average diameter of 10-20 nm and < 200 nm length. A hydrothermal method was used to prepare RGO, while the chemical deposition method was used to synthesis GO-γ-AlOOH nanocomposites for use as fouling-release coating materials. For studying the synergetic effects of graphene-based materials on the surface, mechanical, and FR features, these nanofillers were dispersed in the silicone matrix using the solution casting method. The hydrophobicity and antifouling properties of the surface were studied using water contact angle (WCA), scanning electron, and atomic force microscopes (SEM and AFM). Coatings' roughness, superhydrophobicity, and surface mechanical properties all improved for the homogeneity of the dispersion of the nanocomposite. Laboratory assessments were carried out for 30 days using selected microorganisms to determine the antifouling effects of the coating systems. PDMS/GO-γ-AlOOH nanorod composite had better antibacterial activity than PDMS/RGO nanocomposite against different bacterial strains. This is caused by the high surface area and stabilizing effects of the GO-γ-AlOOH hybrid nanofillers. The PDMS/GO-γ-AlOOH nanorod composite (3 wt%) had the lowest biodegradability percentage (1.6%) and the microbial endurability percentages for gram-positive, gram-negative, and fungi were 86.42%, 97.94%, and 85.97%, respectively. A field trial in natural seawater was conducted to confirm the coatings' FR performance based on the screening process and image analysis for 45 days in a tropical area. The most profound superhydrophobic antifouling nanostructured coating was the homogeneity of the GO-γ-AlOOH (3 wt%) dispersion, which had a WCA of 151° and a rough surface.

Chitosan Nanocomposite Coatings Containing Chemically Resistant ZnO-SnOx Core-shell Nanoparticles for Photocatalytic Antifouling

Functional nanocomposites with biopolymers and zinc oxide (ZnO) nanoparticles is an emerging application of photocatalysis in antifouling coatings. The reduced chemical stability of ZnO in the acidic media in which chitosan is soluble affects the performance of chitosan nanocomposites in antifouling applications. In this study, a thin shell of amorphous tin dioxide (SnO_x) was grown on the surface of ZnO to form ZnO–SnO_x core–shell nanoparticles that improved the chemical stability of the photocatalyst nanoparticles, as examined at pH 3 and 6. The photocatalytic activity of ZnO–SnO_x in the degradation of methylene blue (MB) dye under visible light showed a higher efficiency than that of ZnO nanoparticles due to the passivation of electronic defects. Chitosan-based antifouling coatings with varying percentages of ZnO or ZnO–SnO_x nanoparticles, with or without the glutaraldehyde (GA) crosslinking of chitosan, were developed and studied. The incorporation of photocatalysts into the chitosan matrix enhanced the thermal stability of the coatings. Through a mesocosm study using running natural seawater, it was found that chitosan/ZnO–SnO_x/GA coatings enabled better inhibition of bacterial growth compared to chitosan coatings alone. This study demonstrates the antifouling potential of chitosan nanocomposite coatings containing core–shell nanoparticles as an effective solution for the prevention of biofouling.

Plant-Mediated Biosynthesis and Photocatalysis Activities of Zinc Oxide Nanoparticles: A Prospect towards Dyes Mineralization

In recent years, nanoparticles synthesis by green synthesis has gained extensive attention as a facile, inexpensive, and environmentally friendly method compared with chemical and physical synthesis methods. This review covered the biosynthesis of zinc oxide nanoparticles (ZnO NPs), including the procedure and mechanism. Factors affecting the formation of ZnO NPs are discussed. The presence of active bioorganic molecules in plant extract played a vital role in the formation of ZnO NPs as a natural green medium in the metallic ion reduction processes. ZnO NPs exhibit attractive photocatalysis properties due to electrochemical stability, high electron mobility, and large surface area. In this review, the procedure and mechanism of the ZnO photocatalysis process are studied. The effects of dyes amount, catalysts, and light on photodegradation efficiency are also considered. This review provides useful information for researchers who are dealing with green synthesis of ZnO NPs. Moreover, it can provide investigators with different perceptions towards the efficiency of biosynthesized ZnO NPs on dyes degradation and its restrictions.

Enhancing Photocatalytic Activity of ZnO Nanoparticles in a Circulating Fluidized Bed with Plasma Jets

In this work, zinc oxide (ZnO) nanoparticles were modified in a circulating fluidized bed through argon and hydrogen (Ar–H) alternating-current (AC) arc plasma, which shows the characteristics of nonequilibrium and equilibrium plasma at the same time. In addition, a circulating fluidized bed with two plasma jets was used for cyclic processing. The catalytic degradation performance on Rhodamine B (Rh B) by Ar–H plasma-modified ZnO and pure ZnO was tested in aqueous media to identify the significant role of hydrogen atoms in Rh B degradation mechanism. Meanwhile, the effects of plasma treatment time on the morphology, size and photocatalytic performance of ZnO were also investigated. The results demonstrated that ZnO after 120-min treatment by Ar–H plasma showed Rh B photocatalytic degradation rate of 20 times greater than that of pure ZnO and the reaction follows a first kinetics for the Rh B degradation process. Furthermore, the photocatalyst cycle experiment curve exhibited that the modified ZnO still displays optimum photocatalytic activity after five cycles of experiment. The improvement of photocatalytic activity and luminescence performance attributes to the significant increase in the surface area, and the introduction of hydrogen atoms on the surface also could enhance the time of carrier existence where the hydrogen atoms act as shallow donors.

Zinc oxide nanoparticles inhibit bacterial biofilm formation via altering cell membrane permeability

In the current scenario nanoparticles (NPs) have gained a breathtaking impetus due to their multidimensional applications in varied fields. In the present effort, biogenic synthesis of Zinc Oxide nanoparticles (ZnO NPs) was carried out using aqueous extract of dried powder of Emblica officinalis (Amla). Physicochemical characterization of nanoparticles was carried out via UV-Visible (UV-Vis) spectroscopy, Fourier transform infrared spectroscopy (FTIR), X-ray diffractometer (XRD), Scanning electron microscopy (SEM) and Transmission electron microscopy (TEM) wherein the particles were found to be quasi spherical and with a size ranging between 3 and 11 nm. The ZnO nanoparticles exhibited significant antibacterial activity against bacteria as Streptococcus pyogenes MTCC 442, Bacillus cereus MTCC 1272, Escherichia coli MTCC 1687 and Pseudomonas aeruginosa MTCC 4673. The nanoparticles displayed high anti-biofilm activity toward all the bacterial strains, when tested against three different base materials viz. glass, plastic and metal (Aluminum). Further, the nanoparticle treatment of bacterial cells caused changes in their cell membrane permeability, leading to leakage of nucleic acid from the bacterial cells, thereby defining it as the most probable mechanism for their anti-biofilm potential.

Toxicity of Different Zinc Oxide Nanomaterials at 3 Trophic Levels: Implications for Development of Low-Toxicity Antifouling Agents

Because zinc oxide (ZnO) nanomaterials are used in antifouling and antibacterial solutions, understanding their toxic effects on different aquatic organisms is essential. In the present study, we evaluated the toxicity of ZnO nanoparticles of 10 to 30 nm (ZnONPI) and 80 to 200 nm (ZnONPII), ZnO nanorods (width 80 nm, height 1.7 µm) attached to the support substrate (glass, ZnONRG) and not attached (ZnONRS), as well as Zn²⁺ ions at concentrations ranging from 0.5 to 100 mg/L. Toxicity was evaluated using the microalga Dunaliella salina, the brine shrimp Artemia salina, and the marine bacterium Bacillus cereus. The highest toxicity was observed for ZnONPs (median lethal concentration [LC50] ~15 mg/L) and Zn²⁺ ions (LC50 ~13 mg/L), whereas the lowest toxicity found for ZnO nanorods (ZnONRG LC50 ~60 mg/L; ZnONRS LC50 ~42 mg/L). The presence of the support substrate in case of ZnO nanorods reduced the associated toxicity to aquatic organisms. Smaller ZnONPs resulted in the highest Zn²⁺ ion dissolution among tested nanostructures. Different aquatic organisms responded differently to ZnO nanomaterials, with D. salina and B. cereus being more sensitive than A. salina. Toxicity of nanostructures increased with an increase of the dose and the time of exposure. Supported ZnO nanorods can be used as a low-toxicity alternative for future antimicrobial and antifouling applications. Environ Toxicol Chem 2020;39:1343-1354. © 2020 SETAC.

Sources, presence and potential effects of contaminants of emerging concern in the marine environments of the Great Barrier Reef and Torres Strait, Australia

Current policy and management for marine water quality in the Great Barrier Reef (GBR) in north-eastern Australia primarily focusses on sediment, nutrients and pesticides derived from diffuse source pollution related to agricultural land uses. In addition, contaminants of emerging concern (CECs) are known to be present in the marine environments of the GBR and the adjacent Torres Strait (TS). Current and projected agricultural, urban and industrial developments are likely to increase the sources and diversity of CECs being released into these marine ecosystems. In this review, we evaluate the sources, presence and potential effects of six different categories of CECs known to be present, or likely to be present, in the GBR and TS marine ecosystems. Specifically, we summarize available monitoring, source and effect information for antifouling paints; coal dust and particles; heavy/trace metals and metalloids; marine debris and microplastics; pharmaceuticals and personal care products (PPCPs); and petroleum hydrocarbons. Our study highlights the lack of (available) monitoring data for most of these CECs, and recommends: (i) the inclusion of all relevant environmental data into integrated databases for building marine baselines for the GBR and TS regions, and (ii) the implementation of local, targeted monitoring programs informed by predictive methods for risk prioritization. Further, our spatial representation of the known and likely sources of these CECs will contribute to future ecological risk assessments of CECs to the GBR and TS marine environments, including risks relative to those identified for sediment, nutrients and pesticides.

A Review of Microwave Synthesis of Zinc Oxide Nanomaterials: Reactants, Process Parameters and Morphoslogies

Zinc oxide (ZnO) is a multifunctional material due to its exceptional physicochemical properties and broad usefulness. The special properties resulting from the reduction of the material size from the macro scale to the nano scale has made the application of ZnO nanomaterials (ZnO NMs) more popular in numerous consumer products. In recent years, particular attention has been drawn to the development of various methods of ZnO NMs synthesis, which above all meet the requirements of the green chemistry approach. The application of the microwave heating technology when obtaining ZnO NMs enables the development of new methods of syntheses, which are characterised by, among others, the possibility to control the properties, repeatability, reproducibility, short synthesis duration, low price, purity, and fulfilment of the eco-friendly approach criterion. The dynamic development of materials engineering is the reason why it is necessary to obtain ZnO NMs with strictly defined properties. The present review aims to discuss the state of the art regarding the microwave synthesis of undoped and doped ZnO NMs. The first part of the review presents the properties of ZnO and new applications of ZnO NMs. Subsequently, the properties of microwave heating are discussed and compared with conventional heating and areas of application are presented. The final part of the paper presents reactants, parameters of processes, and the morphology of products, with a division of the microwave synthesis of ZnO NMs into three primary groups, namely hydrothermal, solvothermal, and hybrid methods.

An overview of photocatalytic degradation: photocatalysts, mechanisms, and development of photocatalytic membrane

Photocatalysis is an ecofriendly technique that emerged as a promising alternative for the degradation of many organic pollutants. The weaknesses of the present photocatalytic system which limit their industrial applications include low-usage of visible light, fast charge recombination, and low migration ability of the photo-generated electrons and holes. Therefore, various elements such as noble metals and transition metals as well as non-metals and metalloids (i.e., graphene, carbon nanotube, and carbon quantum dots) are doped into the photocatalyst as co-catalysts to enhance the photodegradation performance. The incorporation of the co-catalyst which alters the photocatalytic mechanism was discussed in detail. The application of photocatalysts in treating persistent organic pollutants such as pesticide, pharmaceutical compounds, oil and grease and textile in real wastewater was also discussed. Besides, a few photocatalytic reactors in pilot scale had been designed for the effort of commercializing the system. In addition, hybrid photocatalytic system integrating with membrane filtration together with their membrane fabrication methods had also been reviewed. This review outlined various types of heterogeneous photocatalysts, mechanism, synthesis methods of biomass supported photocatalyst, photocatalytic degradation of organic substances in real wastewater, and photocatalytic reactor designs and their operating parameters as well as the latest development of photocatalyst incorporated membrane.

The effects of ZnO nanostructures of different morphology on bioenergetics and stress response biomarkers of the blue mussels Mytilus edulis

Biofouling causes massive economical losses in the maritime sector creating an urgent need for effective and ecologically non-harmful antifouling materials. Zinc oxide (ZnO) nanorod coatings show promise as an antifouling material; however, the toxicity of ZnO nanorods to marine organisms is not known. We compared the toxicity of suspended ZnO nanorods (NR) with that of ZnO nanoparticles (NP) and ionic Zn²⁺ in a marine bivalve Mytilus edulis exposed for two weeks to 10 or 100 μg Zn L^-1 of ZnO NPs, NRs or Zn²⁺, or to immobilized NRs. The multi-biomarker assessment included bioenergetics markers (tissue energy reserves, activity of mitochondrial electron transport system and autophagic enzymes), expression of apoptotic and inflammatory genes, and general stress biomarkers (oxidative lesions, lysosomal membrane stability and metallothionein expression). Exposure to ZnO NPs, NRs and Zn²⁺ caused accumulation of oxidative lesions in proteins and lipids, stimulated autophagy, and led to lysosomal membrane destabilization indicating toxicity. However, these responses were not specific for the form of Zn (NPs, NR or Zn²⁺) and showed no monotonous increase with increasing Zn concentrations in the experimental exposures. No major disturbance of the energy status was found in the mussels exposed to ZnO NPs, NRs, or Zn²⁺. Exposure to ZnO NPs and NRs led to a strong induction of apoptosis- and inflammation-related genes, which was not seen in Zn²⁺ exposures. Based on the integrated biomarker response, the overall toxicity as well as the pro-apoptotic and pro-inflammatory action was stronger in ZnO NPs compared with the NRs. Given the stability of ZnO NR coatings and the relatively low toxicity of suspended ZnO NR, ZnO NR coating might be considered a promising low-toxicity material for antifouling paints.

The effective photocatalysis and antibacterial properties of AgBr/Ag2MoO4@ZnO composites under visible light irradiation

A novel Z-scheme AgBr/Ag₂MoO₄@ZnO photocatalyst was fabricated via a hydrothermal process and in situ growth method. X-ray powder diffraction, scanning electron microscopy and transmission electron microscopy were used to determine the structure of the photocatalyst. The results showed that the composites were tightly connected by the (101) lattice plane of ZnO, the (222) plane of Ag₂MoO₄ and the (200) lattice plane of AgBr. Because of the strong redox activity and good separability of photoelectrons and holes induced by the Z-scheme structure, the photodegradation rate for ciprofloxacin (CIP) solution was 80.5% by the photocatalysis of 0.5 AgBr/Ag₂MoO₄@ZnO. In addition, more than 99.999% of Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa cells were killed within 60 min. These results demonstrate that AgBr/Ag₂MoO₄@ZnO is a promising photocatalyst, which can be used in organic pollutant degradation and the photocatalytic antibacterial area.

Cytotoxic and proinflammatory responses induced by ZnO nanoparticles in in vitro intestinal barrier

ZnO nanoparticles (NPs) are widely used nowadays, thus the gastrointestinal exposure to ZnO NPs is likely to be relevant and the effects on the intestinal barrier should be investigated. Polarized Caco-2 cells were exposed from the apical (Ap) and basolateral (Bl) compartments to increasing concentrations (0, 10, 50 and 100 μg/mL) of sonochemical (sono) and commercial ZnO NPs. The transepithelial electrical resistance (TEER), cell viability, proinflammatory cytokine release and presence of protein oxidative damage were evaluated after exposure. TEER was not significantly affected by Ap exposure to either sono or commercial ZnO NPs at any tested concentrations. After Bl exposure to sono ZnO NPs (all the concentrations) and to 100 μg/mL of commercial ZnO NPs TEER was decreased (P < 0.05). Ap and Bl exposure to 100 μg/mL sono ZnO NPs and Ap exposure to 50 μg/mL commercial ZnO NPs induced a significant (P < 0.05) release of interleukin-6. A significant (P < 0.05) release of interleukin-8 was observed after Ap exposure to ZnO NPs at 100 μg/mL and after Bl exposure to sono ZnO NPs at 100 μg/mL. Ap or Bl exposure to sono or commercial ZnO NPs did not affect tumour necrosis factor-alpha secretion or protein sulphydryl oxidation. In conclusion, the ZnO NP exposure from the Ap compartment appeared almost safe, while the exposure through the basal compartment appeared to be more hazardous and the different NP size and crystallinity seem to affect the mode of action, but further studies are necessary to elucidate better these toxicity mechanisms.

Liquid-Repellent Metal Oxide Photocatalysts

Metal oxide photocatalysts (MOPCs) decompose organic molecules under illumination. However, the application of MOPCs in industry and research is currently limited by their intrinsic hydrophilicity because MOPCs can be wetted by most liquids. To achieve liquid repellency, the surface needs to possess a low surface energy, but most organic molecules with low surface energy are degraded by photocatalytic activity. Herein, current methods to achieve liquid repellency on MOPCs, while preventing degradation of hydrophobic coatings, are reviewed. Classically, composite materials containing MOPCs and hydrophobic organic compounds possess good liquid repellency. However, composites normally form irregular coatings and are hard to prepare on surfaces such as those that are mesoporous or nanostructured. In addition, the adhesion of composites to substrates is often weak, resulting in delamination. Recent studies have shown that the direct grafting reaction of polydimethylsiloxane (PDMS) from silicone oil (methyl-terminated PDMS) under illumination results in a stable polymer brush. This easy and simple grafting method allows us to create stable liquid-repellent surfaces on MOPCs of various types, structures, and sizes. In particular, super-liquid-repellent drops with an underlying air layer can be created on PDMS-grafted nano-/microstructured MOPCs. Potential applications of surfaces combining liquid repellency and photocatalytic activity are also discussed; thus offering new ways of using MOPCs in a wider range of applications.

The feasibility and application of PPy in cathodic polarization antifouling

Cathodic polarization antifouling deserves attention because of its environmentally friendly nature and good sustainability. It has been proven that cathodic voltages applied on metal substrates exhibit outstanding antifouling effects. However, most metals immersed in marine environment are protected by insulated anticorrosive coatings, restricting the cathodic polarization applied on metals. This study developed a conducting polypyrrole (PPy)/acrylic resin coating (σ = 0.18 Scm^-1), which can be applied in cathodic polarization antifouling. The good stability and electro-activity of PPy in the negative polarity zone in alkalescent NaCl solution were verified by linear sweep voltammetry (LSV), chronoamperometry (CA), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), demonstrating the feasibility of PPy as cathodic polarization material. Furthermore, the antifouling effects of PPy/acrylicresin coating on 24-h old Escherichia coli bacteria (E. coli) which formed on PPy/acrylic resin-coated plastic plate were measured under different cathodic potentials and treatment time, characterized by fluorescent microscope. The results suggest that at cathodic potential around -0.5 V (vs. saturated calomel electrode (SCE)), there was little trace of attached bacteria on the substrate after 20 min of treatment. PPy/acrylicresin-coated substrates were also subjected to repeated cycles of biofilm formation and electrochemical removal, where high removal efficiencies were maintained throughout the total polarization process. Under these conditions, the generation of hydrogen peroxide is believed to be responsible for the antifouling effects because of causing oxidative damage to cells, suggesting the potential of the proposed technology for application on insulated surfaces in various industrial settings.

Bioinspired nanocoatings for biofouling prevention by photocatalytic redox reactions

Aquaculture is a billion dollar industry and biofouling of aquaculture installations has heavy economic penalties. The natural antifouling (AF) defence mechanism of some seaweed that inhibits biofouling by production of reactive oxygen species (ROS) inspired us to mimic this process by fabricating ZnO photocatalytic nanocoating. AF activity of fishing nets modified with ZnO nanocoating was compared with uncoated nets (control) and nets painted with copper-based AF paint. One month experiment in tropical waters showed that nanocoatings reduce abundances of microfouling organisms by 3-fold compared to the control and had higher antifouling performance over AF paint. Metagenomic analysis of prokaryotic and eukaryotic fouling organisms using next generation sequencing platform proved that nanocoatings compared to AF paint were not selectively enriching communities with the resistant and pathogenic species. The proposed bio-inspired nanocoating is an important contribution towards environmentally friendly AF technologies for aquaculture.

Using micro-patterned surfaces to inhibit settlement and biofilm formation by Bacillus subtilis

Biofilm is a biological complex caused by bacteria attachment to the substrates and their subsequent reproduction and secretion. This phenomenon reduces heat transfer efficiency and causes significant losses in treated sewage heat-recovering systems. This paper describes a physical approach to inhibit bacteria settlement and biofilm formation by Bacillus subtilis, which is the dominant species in treated sewage. Here, micro-patterned surfaces with different characteristics (stripe and cube) and dimensions (1-100 μm) were fabricated as surfaces of interest. Model sewage was prepared and a rotating coupon device was used to form the biofilms. Precision balance, scanning electron microscopy, and confocal laser scanning microscopy (CLSM) were employed to investigate the inhibitory effects and the mechanisms of the biofilm-surface interactions. The results have shown that surfaces with small pattern sizes (1 and 2 μm) all reduced biofilm formation significantly. Interestingly, the CLSM images showed that the surfaces do not play a role in "killing" the bacteria. These findings are useful for future development of new process surfaces on which bacteria settlement and biofilm formation can be inhibited or minimized.

Chitosan-zinc oxide nanocomposite coatings for the prevention of marine biofouling

Marine biofouling is a worldwide problem affecting maritime industries. Global concerns about the high toxicity of antifouling paints have highlighted the need to develop less toxic antifouling coatings. Chitosan is a natural polymer with antimicrobial, antifungal and antialgal properties that is obtained from partial deacetylation of crustacean waste. In the present study, nanocomposite chitosan-zinc oxide (chitosan-ZnO) nanoparticle hybrid coatings were developed and their antifouling activity was tested. Chitosan-ZnO nanoparticle coatings showed anti-diatom activity against Navicula sp. and antibacterial activity against the marine bacterium Pseudoalteromonas nigrifaciens. Additional antifouling properties of the coatings were investigated in a mesocosm study using tanks containing natural sea water under controlled laboratory conditions. Each week for four weeks, biofilm was removed and analysed by flow cytometry to estimate total bacterial densities on the coated substrates. Chitosan-ZnO hybrid coatings led to better inhibition of bacterial growth in comparison to chitosan coatings alone, as determined by flow cytometry. This study demonstrates the antifouling potential of chitosan-ZnO nanocomposite hybrid coatings, which can be used for the prevention of biofouling.

Self-decontaminating photocatalytic zinc oxide nanorod coatings for prevention of marine microfouling: a mesocosm study

The antifouling (AF) properties of zinc oxide (ZnO) nanorod coated glass substrata were investigated in an out-door mesocosm experiment under natural sunlight (14:10 light: dark photoperiod) over a period of five days. The total bacterial density (a six-fold reduction) and viability (a three-fold reduction) was significantly reduced by nanocoatings in the presence of sunlight. In the absence of sunlight, coated and control substrata were colonized equally by bacteria. MiSeq Illumina sequencing of 16S rRNA genes revealed distinct bacterial communities on the nanocoated and control substrata in the presence and absence of light. Diatom communities also varied on nanocoated substrata in the presence and the absence of light. The observed AF activity of the ZnO nanocoatings is attributed to the formation of reactive oxygen species (ROS) through photocatalysis in the presence of sunlight. These nanocoatings are a significant step towards the production of an environmentally friendly AF coating that utilizes a sustainable supply of sunlight.

Engineering design of a biofilm formed on a pH-sensitive ZnO/PSf nanocomposite membrane with antibacterial properties

The interaction between the membrane and BSA at different pHs influences the biofilm formed on the membrane after which other filtration steps are performed in the presence of the engineered and pH sensitive membrane.