Biosorption of methylene blue and eriochrome black T onto the brown macroalgae Fucus vesiculosus: equilibrium, kinetics, thermodynamics and optimization

Recent advances of piezo-catalysis and photocatalysis for efficient environmental remediation

The efficient degradation of organic pollutants in diverse environmental matrices can be achieved through the synergistic application of piezo-catalysis and photocatalysis. The focus of this study is on understanding the fundamental principles and mechanisms that govern the collaborative action of piezoelectric and photocatalytic materials. Piezoelectric nanomaterials, under mechanical stress, generate piezo-potential, which, when coupled with photocatalysts, enhances the generation and separation of charge carriers. The resulting cascade of redox reactions promotes the degradation of a wide spectrum of organic pollutants. The comprehensive investigation involves a variety of experimental techniques, including advanced spectroscopy and microscopy, to elucidate the intricate interplay between mechanical and photoinduced processes. The influence of key parameters, such as material composition, morphology, and external stimuli on the catalytic performance, is systematically explored. This study contributes to the increasing knowledge of environmental remediation and lays the foundation for the development of advanced technologies using piezo and photocatalysis for sustainable pollutant removal.

Novel ultrasonic technology for advanced oxidation processes of water treatment

Textile wastewater accounts for a significant proportion of industrial wastewater worldwide. In particular, dye wastewater accounts for a large proportion and consists of non-degradable dyes, which are substances resistant to biodegradation. Methylene blue is a representative example of such non-degradable dyes. It is not biologically degraded and exhibits toxicity. Various methods for their decomposition are currently being studied. Advanced oxidation processes (AOPs), which generate highly reactive hydroxyl radicals that oxidize and degrade pollutants, have been actively studied. Particularly, the photocatalytic degradation method using TiO2 nanoparticles is one of the most actively studied fields; however, there are still concerns regarding the toxicity of nanoparticles. Research is currently being conducted on AOPs using the cavitation phenomenon of ultrasonic waves. However, achieving high efficiency using existing ultrasonic equipment is difficult. Therefore, in this study, we evaluated a new water treatment technology through AOPs using a focused ultrasonic system with a cylindrical piezoelectric ceramic structure. After determining the optimal conditions for degradation, the degradation process was evaluated as a useful tool for mitigating the toxicity of methylene blue. We found that, under the optimal conditions of 100 W intensity at a frequency of 400 kHz, this system is a helpful instrument for degradation and a new water treatment technology suitable for removing ecotoxicity and genotoxicity.

Exploration of PVC@SiO2 nanostructure for adsorption of methylene blue via using quartz crystal microbalance technology

Methylene blue (MB) dye is considered a well-known dye in many industries and the low concentration of MB is considered very polluted for all environment if it discharged without any treatment. For that reason, many researchers used advanced technologies for removing MB such as the electrochemical methods that considered very simple and give rapid response. Considering these aspects, a novel quartz crystal microbalance nanosensors based on different concentrations of PVC@SiO2 were designed for real-time adsorption of MB dye in the aqueous streams at different pHs and different temperatures. The characterization results of PVC@SiO2 showed that the PVC@SiO2 have synthesized in spherical shape. The performance of the designed QCM-Based PVC@SiO2 nanosensors were examined by the QCM technique. The sensitivity of designed nanosensors was evaluated at constant concentration of MB (10 mg/L) at different pHs (2, 7 and 11) and temperatures (20 °C, 25 °C, and 30 °C). From the experimental, the best concentration of PVC@SiO2 was 3% for adsorbed 9.99 mg of cationic methylene blue at pH 11 and temperature 20 °C in only 5.6 min.

Abatement of microfibre pollution and detoxification of textile dye - Indigo by engineered plant enzymes

Microfibres (diameter <5 mm) and textile dyes released from textile industries are ubiquitous, cause environmental pollution, and harm aquatic flora, fauna, animals and human life. Therefore, enzymatic abatement of microfibre pollution and textile dye detoxification is essential. Microbial enzymes for such application present major challenges of scale and affordability to clean up large scale pollution. Therefore, enzymes required for the biodegradation of microfibres and indigo dye were expressed in transplastomic tobacco plants through chloroplast genetic engineering. Integration of laccase and lignin peroxidase genes into the tobacco chloroplast genomes and homoplasmy was confirmed by Southern blots. Decolorization (up to 86%) of samples containing indigo dye (100 mg/L) was obtained using cp-laccase (0.5% plant enzyme powder). Significant (8-fold) reduction in commercial microbial cellulase cocktail was achieved in pretreated cotton fibre hydrolysis by supplementing cost effective cellulases (endoglucanases, ß-glucosidases) and accessory enzymes (swollenin, xylanase, lipase) and ligninases (laccase lignin peroxidase) expressed in chloroplasts. Microfibre hydrolysis using cocktail of Cp-cellulases and Cp-accessory enzymes along with minimal dose (0.25% and 0.5%) of commercial cellulase blend (Ctec2) showed 88%-89% of sugar release from pretreated cotton and microfibres. Cp-ligninases, Cp-cellulases and Cp-accessory enzymes were stable in freeze dried leaves up to 15 and 36 months respectively at room temperature, when protected from light. Use of plant powder for decolorization or hydrolysis eliminated the need for preservatives, purification or concentration or cold chain. Evidently, abatement of microfibre pollution and textile dye detoxification using Cp-enzymes is a novel and cost-effective approach to prevent their environmental pollution.

Effect of the TiO2 Colloidal Size Distribution on the Degradation of Methylene Blue

TiO₂ is the most commonly used photocatalyst in water treatment. The particle size of TiO₂ is an important factor that significantly influences its activity during photocatalytic degradation. In the presence of liquid, the properties of nanopowders composed of exactly the same product clearly differ according to their aggregation size. In this study, TiO₂ nanoparticles with a controlled size were fabricated by focused ultrasound dispersion. The high energy generated by this system was used to control the size of TiO₂ particles in the suspension. The constant high energy released by cavitation enabled the dispersion of the particles without a surfactant. The activities of the prepared TiO₂ photocatalysts for methylene blue (MB) degradation were then compared. The dye degradation effect of the photocatalyst was as high as 61.7% after 10 min when the size of the powder was controlled in the solution, but it was only as high as 41.0% when the aggregation size was not controlled. Furthermore, when the TiO₂ concentration exceeded a certain level, the photocatalytic activity of TiO₂ decreased. Controlling the size of the aggregated photocatalyst particles is, therefore, essential in water-treatment technologies utilizing TiO₂ photocatalytic properties, and adjusting the TiO₂ concentration is an important economic factor in this photocatalytic technology. This study contributes to the development of processes for degrading dyes, such as MB, released from wastewater into aquatic environments.

Use of artificial intelligence for optimizing biosorption of textile wastewater using agricultural waste

Most of the dyes are toxic and non-biodegradable in textile industry wastewaters. Therefore, removal of textile dye using agriculture waste becomes crucial for the environment. This can be accomplished by the biosorption process which is the passive uptake of pollutants by agricultural waste. In this study, Response Surface Methodology (RSM), Artificial Neural Network (ANN) and Adaptive Neuro-Fuzzy Inference System (ANFIS) were used to obtain optimum conditions for Methylene Blue (MB) removal using sugarcane bagasse and peanut hulls as low-cost agricultural waste. The experimental design was carried out to study the effect of temperature, pH, biosorbent amount and dye concentration. The maximum MB dye removal considering the effect of total dissolved solids from aqueous solutions of 74.49% and 67.99% by sugarcane bagasse and peanut hulls, respectively. The models specify that they could predict biosorption with high accuracy having R²-value above 0.9. Statistical studies for RSM, ANFIS and ANN models were compared. Further, the models were optimized for maximum dye removal was at 1.21 g of biosorbent, pH 5.24, 31.24 mg/L MB concentration, 22.29°C of dye solution using sugarcane bagasse and at 1.37 g of biosorbent, pH 5.77, 36.7 mg/L MB concentration, 26.8°C of dye solution using peanut hulls. Additionally, Fourier Transform Infra-Red (FTIR) spectral analysis was also carried out to confirm the biosorption.

Recent advances in the removal of dyes from wastewater using low-cost adsorbents

The presence of hazardous dyes in wastewater cause disastrous effects on living organisms and the environment. The conventional technologies for the remediation of dyes from water have several bottlenecks such as high cost and complex operation. This review aims to present a comprehensive outlook of various bio-sorbents that are identified and successfully employed for the removal of dyes from aqueous environments. The effect of physicochemical characteristics of adsorbents such as surface functional groups, pore size distribution and surface areas are critically evaluated. The adsorption potential at different experimental conditions of diverse bio-sorbents has been also explored and the influence of certain key parameters like solution pH, temperature, concentration of dyes, dosage of bio-sorbent and agitation speed is carefully evaluated. The mechanism of dyes adsorption, regeneration potential of the employed bio-sorbents and their comparison with other commercial adsorbents are discussed. The cost comparison of different adsorbents and key technological challenges are highlighted followed by the recommendations for future research.

Growth of marine macroalgae Ectocarpus sp. on various textile substrates

Marine macroalgae are cultivated for diverse applications, from biofuel and biogas to biofiltering, from food to cosmetics or pharmaceuticals. Since macroalgae cultivation does not compete with land-based food crops for the necessary arable land or fresh water, it can increase the possibilities of sustainably harvested biomass. New technologies permit even land-based growing of marine macroalgae, besides the more common coastal or offshore cultivation. All these technologies, however, raise the question of how to provide ideal cultivation conditions, especially for adherent macroalgae, and of how to harvest them economically and sustainably. While some reports about growing marine macroalgae on diverse textile materials, such as polyester ropes or polypropylene nets, can be found in the literature, we report here for the first time on the growth of a marine macroalga on knitted fabrics. In our study, Ectocarpus sp. was cultivated in shallow rectangular cultivation vessels on knitted fabrics of various materials and structures revealing a significant influence of both parameters. Undesired changes of the pH value in the cultivation system as well as foam generation were attributed to textile auxiliaries. Considering all these influences, the best-suited knitted fabrics were identified as open-pore structures from hairy yarns made partly or completely from natural fibres.

Efficient Removal of Methylene Blue Using Living Biomass of the Microalga Chlamydomonas moewusii: Kinetics and Equilibrium Studies

The efficiency of the living biomass of the microalga Chlamydomonas moewusii in removing methylene blue dye is determined. The kinetics, equilibrium isotherms, and the effects on this process of the pH, contact time, and initial concentration of the dye are studied. Fourier transform infrared spectrometry and point of zero charge are used to characterize the biomass and explore the process. The maximum removal capacity derived from the Langmuir isotherm is 212.41 ± 4.55 mg/g after 7 h of contact time at pH 7. The removal process is rapid because kinetic studies revealed that the best fit of the data is with pseudo-third-order kinetics. The removal efficiency is dependent on the pH; as the pH increased, the efficiency is higher. These results show that the living biomass of this microalga is a very efficient biosorbent and therefore very suitable for the removal of methylene blue from aqueous solutions.

Review on Methylene Blue: Its Properties, Uses, Toxicity and Photodegradation

The unavailability of clean drinking water is one of the significant health issues in modern times. Industrial dyes are one of the dominant chemicals that make water unfit for drinking. Among these dyes, methylene blue (MB) is toxic, carcinogenic, and non-biodegradable and can cause a severe threat to human health and environmental safety. It is usually released in natural water sources, which becomes a health threat to human beings and living organisms. Hence, there is a need to develop an environmentally friendly, efficient technology for removing MB from wastewater. Photodegradation is an advanced oxidation process widely used for MB removal. It has the advantages of complete mineralization of dye into simple and nontoxic species with the potential to decrease the processing cost. This review provides a tutorial basis for the readers working in the dye degradation research area. We not only covered the basic principles of the process but also provided a wide range of previously published work on advanced photocatalytic systems (single-component and multi-component photocatalysts). Our study has focused on critical parameters that can affect the photodegradation rate of MB, such as photocatalyst type and loading, irradiation reaction time, pH of reaction media, initial concentration of dye, radical scavengers and oxidising agents. The photodegradation mechanism, reaction pathways, intermediate products, and final products of MB are also summarized. An overview of the future perspectives to utilize MB at an industrial scale is also provided. This paper identifies strategies for the development of effective MB photodegradation systems.

Biosorption: A Review of the Latest Advances

Biosorption is a variant of sorption techniques in which the sorbent is a material of biological origin. This technique is considered to be low cost and environmentally friendly, and it can be used to remove pollutants from aqueous solutions. The objective of this review is to report on the most significant recent works and most recent advances that have occurred in the last couple of years (2019–2020) in the field of biosorption. Biosorption of metals and organic compounds (dyes, antibiotics and other emerging contaminants) is considered in this review. In addition, the use and possibilities of different forms of biomass (live or dead, modified or immobilized) are also considered.

Fabrication of Zn-based magnetic zeolitic imidazolate framework bionanocomposite using basil seed mucilage for removal of azo cationic and anionic dyes from aqueous solution

The Basil seeds mucilaginous polysaccharide exhibits remarkable physical and chemical properties like high water-absorbing capacity, emulsifying, and stabilizing properties. The metal-organic frameworks are one of the most promising precursors made of metal clusters and organic connectors for the fabrication of advanced adsorbents due to their unique properties. In this study, the bionanocomposite of magnetic zeolitic imidazolate framework-8 was successfully synthesized and applied to adsorb azo cationic and anionic dyes. The synthesized magnetite nanoparticles were pretreated with mucilage extracted from basil seeds to acquire negatively charged magnetite surface, followed by nucleation through attracting zinc cation, and then the growth of metal-organic frameworks which yields high-quality ZIF-8 crystals. The samples were characterized by Field Scanning Electron Microscopy, X-ray Diffraction, Fourier Transform Infrared Spectrometry, vibrating sample magnetometer, and Brunauer-Emmett-Teller surface area analysis. In the process of adsorption, influencing factors and recycling regeneration were discussed, and the adsorption mechanisms such as kinetics, isotherm, and thermodynamics were explored. The results of the adsorption process showed that maximum adsorption capacities were 9.09 and 13.21 mg/g for Methylene blue and Eriochrome Black T, respectively. The excellent reusability combined with its magnetic separation property makes the nanocomposite a promising adsorbent for the removal of cationic and anionic dyes.

Simultaneous biosorption of Cd(II), Ni(II) and Pb(II) onto a brown macroalgae Fucus vesiculosus: Mono- and multi-component isotherms, kinetics and thermodynamics

Due to the anthropic activities, several heavy metal ions are introduced into the environment, impacting ecosystems and local activities. In this context, the biosorption process using algae represents an alternative form for these compounds remediation due to the advantages derived from the biosorbent and process efficiency. Thus, the present study evaluated Cadmium (Cd(II)), Nickel (Ni(II)) and Lead (Pb(II)) remediation from aqueous media in mono- and multi-component systems. The biosorbent was characterized in terms of its morphology and composition and parameters involving equilibrium, kinetics, and thermodynamics were investigated. Lastly, the sample was considered in a real surface water sample remediation impacted by a mining dam rupture. Except for Freundlich, all isotherm models tested satisfactorily adjusted to the experimental data for a mono-component system. The maximum biosorption capacities (qm) were 143.2 ± 7.5, 70.1 ± 1.9, 516.3 ± 12.5 mg g-1 for Cd(II), Ni(II) and Pb(II) ions, respectively. When binary systems were considered, an antagonism effect was observed. The biosorption of Cd(II) was drastically affected by the presence of Ni(II), while Pb(II) biosorption in general was less affected by other metals presence. As observed for the binary system, the worst effect in the ternary system was observed for Cd(II) biosorption, being significantly affected by Ni(II) and Pb(II) presence. Overall, the biosorption order in mono- and multi-component systems was found to be Pb(II) ≫ Cd(II) > Ni(II). The affinity for the metals ions was also observed by Elovich's desorption constant, in which aPb(II)≪aCd(II)aCd(II), achieving an equilibrium passed 49 min. From the stages involved in biosorption process, film diffusion presented the greatest contribution as control-stage obtaining a lower diffusion coefficient in all cases. The process was spontaneous in all temperature range evaluated, considered exothermic for all metal ions evaluated. Iron, manganese and nickel concentrations in real surface water samples were higher than the allowed by the Brazilian National Environment Council (CONAMA). Comparing the hazard index values before and after the biosorption process, a reduction superior to 8 × was observed (HIbefore: 3.36, HIafter: 0.40), in which there was no non-carcinogenic risk imposed to the surrounding population after the treatment applied.