The Effectiveness in the Removal of PAHs from Aqueous Solutions in Physical and Chemical Processes: A Review

Performance test and analysis of tetracycline degradation using a Micro-Nano Bubble system

Antibiotics and organic residues from Tetracycline (TC) and other pharmaceuticals administered to aquatic living organism have negative impacts on aquatic environment by killing-off non-target living organisms and developing antibiotic-resistant bacteria. In this study, Micro-Nano Bubble (MNB) system was used to remove TC residues. MNB system demonstrated good level of degradation efficiency, as resulted in experiment where in time of 100 min, the TC degraded at rate of 82.66% from its initial concentration of TC when the initial concentration was 1 mg/L. When the initial concentration was increased to 10 mg/L, MNB system degraded TC at 64.35% of their initial, this means MNB system demonstrated good level of efficiency for TC removal and indicated that it is more efficient in TC degradation under the conditions of low initial TC concentration and high availability of dissolved oxygen (DO). In the system as the temperature increased there was a significant decrease in DO saturation which was related to the TC complex structure that contain multiple function groups such as amino groups, hydroxyl and carboxyl which possess high strong affinity with oxygen that leads to their adsorption onto bubble surface. This study provides significant insights into the application of MNB system for the removal of organic residues within aquatic ecosystem and underscores the need for further exploration of MNB technology for environmental remediation.

A systematic review of polycyclic aromatic hydrocarbon pollution: A combined bibliometric and mechanistic analysis of research trend toward an environmentally friendly solution

Pollution caused by polycyclic aromatic hydrocarbons (PAHs) is a significant concern. This concern has become more problematic given the rapid modification of PAHs in the environment during co-contamination to form substituted PAHs. This review aims to integrate bibliometric analysis with a rigorous study of mechanistic insights, resulting in a more comprehensive knowledge of evolving research trends on PAH remediation. The results show that research in this field has progressed over the years and peaked in 2022, potentially due to the redirection of resources toward emerging pollutants, hinting at the dynamic nature of environmental research priorities. During this year, 158,147 documents were published, representing 7 % of the total publications in the field between 2000 and 2023. The different remediation methods used for PAH remediation were identified and compared. Bioremediation, having >90 % removal efficiency, has been revealed to be the best technique because it is cost-effective and easy to operate at large scale in situ and ex-situ. The current challenges in PAH remediation have been detailed and discussed. Implementing innovative and sustainable technologies that target pollutant removal and valuable compound recovery is necessary to build a more robust future for water management.

Characteristics of polycyclic aromatic hydrocarbons (PAHs) removal by nanofiltration with and without coexisting organics

Polycyclic aromatic hydrocarbons (PAHs) are contaminants of great concern owing to their persistence, toxicity, and bioaccumulation in aquatic environments. In this study, nanofiltration (NF) was used to investigate the removal of naphthalene (NAP) and phenanthrene (PHE) using three membranes of NF270, NF90, and DK. Subsequently, we examined the effects of coexisting organics on PAHs removal. Based on the results, DK was determined to be the optimal membrane for removing PAHs by comparing the membrane flux and pollutant rejection. The membrane flux reached 34.32 L/m2·h, and the NAP and PHE rejections were 92.21% and 97.85%, respectively, at transmembrane pressure (TMP) of 5 bar using DK. Coexisting organics decreased the membrane fluxes of NF270 and DK in the following order: protein > glucose > humic acid. The NAP and PHE rejections were obviously improved using NF270 in the following order: humic acid > protein > glucose. The PHE rejection was slightly improved using DK. A low concentration of organics could reduce the NAP rejection using DK; however, the NAP rejection could be restored at high concentrations of organics, except for humic acid. Coexisting organics could cause severe membrane fouling. The order of the effect of different coexisting organics on membrane fouling was protein > humic acid > glucose. The total investment and operating costs were about 1.47 and 0.187 million dollars, respectively, for treating PAHs solution using DK when the feed flow was 300 m3/d.

Envisioning the innovative approaches to achieve circular economy in the water and wastewater sector

Given the challenges of urbanization and rapid resource depletion, policymakers have been compelled to abandon the old sequential paradigm of "take-make-use-dispose" to a circular approach that prioritizes preservation of natural resources. The circular economy represents a sustainable management concept that focuses on reducing, recovering, reusing, and recycling waste. While significant strides have been made in implementing circular economy principles in various industries such as automotive, electronics, and construction, particular attention has been given to the water and wastewater domains due to imbalances in water resources. Here we review the global progress of circular economy adoptability in the water and wastewater domains, considering technical, environmental, economic, and social perspectives. It assesses the current state of circular economy integration in the wastewater domain worldwide and presents approaches to promote and accelerate its adoption. The study critically examines the principles of waste management, known as the 6Rs (reclaim, restore, recycle, reduce, recover, reuse), in order to formulate effective strategies for integrating circular economy practices in the water and wastewater domains. Additionally, the study provides an overview of existing research conducted on different aspects of circular economy. Finally, the study analyzes the challenges and opportunities associated with implementing circular economy principles in the water sector.

Hazards of polycyclic aromatic hydrocarbons: a review on occurrence, detection, and role of green nanomaterials on the removal of PAH from the water environment

Organic pollutant contamination in the environment is a serious and dangerous issue, especially for developing countries. Among all organic pollutants, polycyclic aromatic hydrocarbons (PAHs) are the more frequently discovered ones in the environment. PAH contamination is caused chiefly by anthropogenic sources, such as the disposal of residential and industrial waste and automobile air emissions. They are gaining interest due to their environmental persistence, toxicity, and probable bioaccumulation. The existence of PAHs may result in damage to the environment and living things, and there is widespread concern about the acute and chronic threats posed by the release of these contaminants. The detection and elimination of PAHs from wastewater have been the focus of numerous technological developments during recent decades. The development of sensitive and economical monitoring systems for detecting these substances has attracted a lot of scientific attention. Using several nanomaterials and nanocomposites is a promising treatment option for the identification and elimination of PAHs in aquatic ecosystems. This review elaborated on the sources of origin, pathogenicity, and widespread occurrence of PAHs. In addition, the paper highlighted the use of nanomaterial-based sensors in detecting PAHs from contaminated sites and nanomaterial-based absorbents in PAH elimination from wastewater. This review also addresses the development of Graphene and Biofunctionalized nanomaterials for the elimination of PAHs from the contaminated sites.

Boosted visible-light-driven degradation over stable ternary heterojunction as a plasmonic photocatalyst: Mechanism exploration, pathway and toxicity evaluation

The incorporation of plasmonic metals into semiconductors forming heterojunction photocatalysts is a promising route to enhance the photocatalytic performance in visible light. In this work, we reported the visible-light-driven one-dimensional (1D) nanostick silver/silver sulfide (Ag/Ag₂S) photocatalyst combining with two-dimensional (2D) nanosheet reduced graphene oxide intersected by hollow structure (h-RGO) was prepared via a feasible approach at room temperature. The density of Ag depositing on the surface of Ag₂S was easily tuned by the concentration of sodium borohydride and the silicon dioxide nanospheres were employed as templates in the preparation of h-RGO by the layer-by-layer (LBL) assembly. The ternary plasmonic Ag/Ag₂S/h-RGO photocatalysts exhibited better photocatalytic performance for degradation of naphthalene (95.95%) and 1-naphthol (98.65%) under visible light than the pure Ag₂S, composite Ag/Ag₂S and composite Ag/Ag₂S/RGO. Localized surface plasmon resonance of Ag, heterojunction formed between Ag/Ag₂S and RGO and the unique characteristics of h-RGO, which included higher specific surface areas, more efficient reflections of light and more active sites than RGO for boosting separation efficiency of charge carriers, were all responsible for such enhancement. By combining the characterization results with various computations, the mechanism, potential degradation pathways and the toxicity of the generated intermediates for photodegradation were examined. In addition to offering profound insight into the expansion of effective plasmonic photocatalysts with novel structures, the current study is beneficial to ease the environmental crisis to a certain extent.

The Impact of Tetracycline Pollution on the Aquatic Environment and Removal Strategies

Antibacterial drugs are among the most commonly used medications in the world. Tetracycline is a widely used antibiotic for human and animal therapy due to its broad-spectrum activity, high effectiveness, and reasonable cost. The indications for treatment with tetracycline include pneumonia, bone and joint infections, infectious disorders of the skin, sexually transmitted and gastrointestinal infections. However, tetracycline has become a serious threat to the environment because of its overuse by humans and veterinarians and weak ability to degrade. Tetracycline is capable of accumulating along the food chain, causing toxicity to the microbial community, encouraging the development and spread of antibiotic resistance, creating threats to drinking and irrigation water, and disrupting microbial flora in the human intestine. It is essential to address the negative impact of tetracycline on the environment, as it causes ecological imbalance. Ineffective wastewater systems are among the main reasons for the increased antibiotic concentrations in aquatic sources. It is possible to degrade tetracycline by breaking it down into small molecules with less harmful or nonhazardous effects. A range of methods for physical, chemical, and biological degradation exists. The review will discuss the negative effects of tetracycline consumption on the aquatic environment and describe available removal methods.

Synthesis of Fe2O3/Mn2O3 Nanocomposites and Impregnated Porous Silicates for Dye Removal: Insights into Treatment Mechanisms

Fe2O3/Mn2O3 nanocomposites and impregnated porous silicates (Fe2O3/Mn2O3@SiO2 [FMS]) were prepared and investigated as catalytic adsorbents. The catalysts were applied for cationic and anionic dye pollutants in the adsorption, Fenton reaction, and photocatalysis processes at a pH of 7. Fe2O3/Mn2O3 nanoparticles (FM-NPs) were prepared using the co-precipitation method and were impregnated in SiO2 by the sol–gel process. The synthesized materials were characterized using various sophisticated techniques. Results indicated that the impregnation of bi-metallic NPs in SiO2 increased the surface area, and the function of the adsorbent also improved. FMS showed a significant adsorption effect, with 79.2% rhodamine B removal within 15 min. Fenton and photocatalyst reaction showed removal rates of 85.3% and 97.9%, respectively, indicating that negatively charged porous silicate attracts cationic pollutants. In the case of the anionic pollutant, Congo red, the adsorption reaction of FMS did not occur, and the removal rate of the photocatalyst reaction was 79%, indicating the repulsive force between the negatively charged silica and the anionic dye. Simultaneously, bi-metal-bonded FM-NPs facilitated the photocatalytic reaction, reducing the recombination of electron-hole pairs. This study provides new insights into the synthesis of FM-NPs and FMS as photocatalytic adsorbents and their photocatalytic mechanisms based on reaction conditions and contaminant characteristics. The developed materials have potential applications for environmental mitigation.

Adsorption of polycyclic aromatic hydrocarbons from wastewater using graphene-based nanomaterials synthesized by conventional chemistry and green synthesis: A critical review

Polycyclic aromatic hydrocarbons (PAHs) are organic pollutants formed mainly by the incomplete combustion of organic matter, such as oil, gas and coal. The presence of PAHs can cause irreparable damage to the environment and living beings, which has generated a global concern with the short and long term risks that the emission of these pollutants can cause. Many technologies have been developed in the last decades aiming at the identification and treatment of these compounds, mainly, the PAHs from wastewater. This review features an overview of studies on the main methods of PAHs remediation from wastewater, highlighting the adsorption processes, through the application of different adsorbent nanomaterials, with a main focus on graphene-based nanomaterials, synthesized by conventional and green routes. Batch and fixed-bed adsorptive processes were evaluated, as well as, the mechanisms associated with such processes, based on kinetic, equilibrium and thermodynamic studies. Based on the studies analyzed in this review, green nanomaterials showed higher efficiency in removing PAHs than the conventional nanomaterials. As perspectives for future research, the use of green nanomaterials has shown to be sustainable and promising for PAHs remediation, so that further studies are needed to overcome the possible challenges and limitations of green synthesis methodologies.

Reusable Cavitand-Based Electrospun Membranes for the Removal of Polycyclic Aromatic Hydrocarbons from Water

The removal of toxic and carcinogenic polycyclic aromatic hydrocarbons (PAHs) from water is one of the most intractable environmental problems nowadays, because of their resistance to remediation. This work introduces a highly efficient, regenerable membrane for the removal of PAHs from water, featuring excellent filter performance and pH-driven release, thanks to the integration of a cavitand receptor in electrospun polyacrylonitrile (PAN) fibers. The role of the cavitand receptor is to act as molecular gripper for the uptake/release of PAHs. To this purpose, the deep cavity cavitand BenzoQxCav is designed and synthetized and its molecular structure is elucidated via X-Ray diffraction. The removal efficiency of the new adsorbent material toward the 16 priority PAHs is demonstrated via GC-MS analyses at ng L^-1 concentration. A removal efficiency in the 32%, to 99% range is obtained. The regeneration of the membrane is performed by exploiting the pH-driven conformational switching of the cavitand between the vase form, where the PAHs uptake takes place, to the kite one, where the PAHs release occurs. The absorbance and regeneration capability of the membrane are successfully tested in four uptake/release cycles and the morphological stability.

Removal of polycyclic aromatic hydrocarbons (PAHs) in conventional drinking water treatment processes

The presence of polycyclic aromatic hydrocarbons (PAHs) in water poses a serious threat to the human health due to their toxic effects. Therefore, the removal of these compounds from drinking water in Potable Water Treatment Plants (PWTPs) should be evaluated and optimized to assure the quality of water intended for human consumption. In this work, changes in PAHs levels during drinking water treatment processes have been monitored to evaluate the effectiveness of conventional processes in the removal of these recalcitrant pollutants. Several chemical treatment methods based on the addition of KMnO₄, FeCl₃ and NaClO were evaluated through jar tests. The analysis of PAH content of aqueous samples was carried out by gas chromatography coupled with mass spectrometry. The highest removal efficiency, over 90%, was obtained for benzo(a)anthracene, benzo(a)pyrene and dibenzo(a,h)anthracene. The most recalcitrant compounds to degradation were fluorene, anthracene, phenanthrene and flouranthene with reduction rates between 45 and 57%. The conventional treatment processes assessed have been proved to be effective reducing the PAH below the legal limits of drinking water quality. The definition of a parameter based on chemical properties of PAHs, i.e., sorption capacity and energy required to remove an electron, enabled the prediction of removal rate of pollutants which represents a valuable information for the plant operation.

Performance and microbial community dynamics relationship within a step-feed anoxic/oxic/anoxic/oxic process (SF-A/O/A/O) for coking wastewater treatment

A step-feed anoxic/oxic/anoxic/oxic (SF-A/O/A/O) was developed and successfully applied to full-scale coking wastewater treatment. The performance and microbial community were evaluated and systematically compared with the anoxic/oxic/oxic (A/O/O) process. SF-A/OA/O process exhibited efficient removal of COD, NH₄⁺-N, TN, phenols, and cyanide with corresponding average effluent concentrations of 317.9, 1.8, 46.2, 1.1, and 0.2 mg·L^-1, respectively. In particular, the TN removal efficiency of A/O/O process was only 7.8%, with an effluent concentration of 300.6 mg·L^-1. Furthermore, polycyclic aromatic hydrocarbons with high molecular weight were the dominant compounds in raw coking wastewater, which were degraded to a greater extent in SF-A/OA/O. The abundance in Thiobacillus, SM1A02, and Thauera could be the main reason why SF-A/O/A/O was superior to A/O/O in treating TN. The microbial community structure of SF-A/O/A/O was similar among stages in system (P ≥ 0.05, Welch's t-test) and was less affected by environmental factors, which may have been one of the important factors in the system's strong stability.

Adsorption of polycyclic aromatic hydrocarbons by surfactant-modified clinoptilolites for landfill leachate treatment

The authors report the potential adsorption capacities of three surfactant-modified clinoptilolites (MC)-cetylpyridinium chloride (CPC)-MC, didodecyldimethylammonium bromide (DDAB)-MC, and hexadecyltrimethylammonium bromide (HDTMA)-MC-for the removal of polycyclic aromatic hydrocarbons (PAHs) from aquatic environments and landfill leachate. A liquid-liquid extraction method was used to extract PAHs from water and GC/MS was used to analyse the PAHs. PAH accumulations on CPC-MC, DDAB-MC, and HDTMA-MC were linear over 21 successive batch adsorption tests for anthracene (708, 737, and 750 µg/g), fluoranthene (1355, 1583, and 1303 µg/g), fluorene (973, 1060, and 1147 µg/g), phenanthrene (844, 1057, and 989 µg/g), and pyrene (1343, 1569, and 1269 µg/g). The leachability after 21 successive accumulations was <2% for anthracene, <4% for fluoranthene, <3% for fluorene, <4% for pyrene, and <5% for phenanthrene for each adsorbent. PAH removals from landfill leachate for anthracene, fluoranthene, fluorene, phenanthrene, and pyrene were 97.8%, 98.6%, 95.7%, 97.0%, and 98.5% for CPC-MC and 99.0%, 99.6%, 98.0%, 99.0%, and 99.6% for DDAB-MC, respectively, meeting the fresh water quality standards established by British Columbia and the World Health Organization (WHO) for anthracene, fluoranthene, and fluorene. The molecular weight and molecular structure of PAHs and the hydrophobicity of adsorbents can fundamentally influence the PAH adsorption mechanism based on π-π stacking.

Enhanced degradation of benzo[a]pyrene and toxicity reduction by microbubble ozonation

The microbubble technique has drawn great attention for efficient utilization of ozone for advance oxidation processes. Therefore, in this study, microbubble ozonation was investigated to evaluate the removal efficiency and toxicity reduction of benzo[a]pyrene. Compared with conventional macrobubble ozonation, microbubble ozonation produced higher concentrations of hydroxyl radicals and ozone in aqueous solutions, resulting in more efficient and persistent degradation of benzo[a]pyrene. Moreover, microbubble ozonation completely removed the acute toxicity of benzo[a]pyrene to Daphnia magna, whereas the toxicity reduction by macrobubble ozonation was not consistent owing possibly to toxic degradation products. These findings suggest that microbubble ozonation is a promising technique in terms of both chemical degradation and toxicity reduction of organic pollutants.

Removal of Polycyclic Aromatic Hydrocarbons (PAHs) from Produced Water by Ferrate (VI) Oxidation

Polycyclic aromatic hydrocarbons (PAHs) are mutagenic and carcinogenic contaminants made up of fused benzene rings. Their presence has been reported in several wastewater streams, including produced water (PW), which is the wastewater obtained during oil and gas extraction from onshore or offshore installations. In this study, ferrate (VI) oxidation was used for the first time for the treatment of 15 PAHs, with the total concentration of 1249.11 μg/L in the produced water sample. The operating parameters viz., ferrate (VI) dosage, pH, and contact time were optimized for maximum removal of PAHs and chemical oxygen demand (COD). Central composite design (CCD) based on response surface methodology (RSM) was used for optimization and modeling to evaluate the optimal values of operating parameters. PAH and COD removal percentages were selected as the dependent variables. The study showed that 89.73% of PAHs and 73.41% of COD were removed from PW at the optimal conditions of independent variables, i.e., ferrate (VI) concentration (19.35 mg/L), pH (7.1), and contact time (68.34 min). The high values of the coefficient of determination (R2) for PAH (96.50%) and COD (98.05%) removals show the accuracy and the suitability of the models. The results showed that ferrate (VI) oxidation was an efficient treatment method for the successful removal of PAHs and COD from PW. The study also revealed that RSM is an effective tool for the optimization of operating variables, which could significantly help to reduce the time and cost of experimentation.

Removal of polycyclic aromatic hydrocarbons from aqueous media using modified clinoptilolite

Carcinogenic polycyclic aromatic hydrocarbons (PAHs) are widespread in the environment. In this study, the removal of PAHs from aqueous media was assessed using samples of clinoptilolite, a natural zeolite, pre-treated with 1 mol/L of NaCl, (Na pre-treated clinoptilolite, NC). Samples (10 g) of NC were separately modified with 5, 2, 2, and 20-mmol/L solutions of cetylpyridinium chloride (CPC), didodecyldimethyl ammonium bromide (DDAB), hexadecyltrimethylammonium bromide (HDTMA), and tetramethyl ammonium chloride (TMA) surfactants as potential cost-effective adsorbents. The kinetics, optimal sorbent dosage, and competitive effects were evaluated through batch adsorption tests using deionised water spiked with five PAHs (anthracene (50 μg/L), fluoranthene (100 μg/L), fluorene (100 μg/L), phenanthrene (100 μg/L), and pyrene (100 μg/L)). The surfactant non-modified (NC) and TMA-MC (modified clinoptilolite) exhibited PAH removal of <66% from the spiked concentration in aqueous solution, while CPC-MC, DDAB-MC, and HDTMA-MC achieved removal rates of >93% for the five PAHs after 24 h at a solid:liquid ratio of 1:100. The remaining concentrations of anthracene and fluoranthene were below 3 μg/L, and that of fluorene was <6 μg/L, lower than the water quality criteria of British Columbia, Canada, for protecting aquatic life. However, HDTMA-MC retained >83% of the fluorene. Over 80% of all PAHs were absorbed within 15 min for the CPC-MC and DDAB-MC, and the maximum adsorption was reached in <2 h. Three kinetic models were applied assuming pseudo-first-order, pseudo-second-order, and intra-particle equations, and the results were well-represented by the pseudo-second-order equation. The PAH sorption results indicated that the adsorption mechanism is based on PAH hydrophobicity, and π-π electron-donor-acceptor interaction with surfactant. CPC and DDAB with two long chain hydrocarbons had more PAH adsorption than HDTMA with one, and TMA with no long chain hydrocarbons (DDAB-MC > CPC-MC > HDTMA-MC ≫ TMA-MC > NC). With a solid:liquid ratio of 1:200, over 90%, 80%, and 70% of the anthracene, fluoranthene, and pyrene were adsorbed by the CPC-MC, DDAB-MC, and HDTMA-MC, respectively.

Natural aeolian dust particles have no substantial effect on atmospheric polycyclic aromatic hydrocarbons (PAHs): A laboratory study based on naphthalene

Natural aeolian dust (AD) particles are potential carriers of polycyclic aromatic hydrocarbons (PAHs) in the atmosphere. The heterogeneous interaction between them may lead to worsened air quality and enhanced cytotoxicity and carcinogenicity of ambient particulates in downwind areas, and this topic requires in-depth exploration. In this study, AD samples were collected from four Asian dust sources, and their physical properties and compositions were determined, showing great regional differences. The physical and chemical interactions of different AD particles with naphthalene (Nap; model PAH) were observed in aqueous systems. The results showed that AD particles from the Loess Plateau had weak adsorption to Nap, which was fitted by the Langmuir isotherm. There was no obvious adsorption to Nap found for the other three AD samples. This difference seemed to depend mainly on the specific surface area and/or the total pore volume. In addition, the Nap in the aqueous solution did not undergo chemical reactions under dark conditions and longwave ultraviolet (UV) radiation but degraded under shortwave UV radiation, and 2-formylcinnamaldehyde and 1,4-naphthoquinone were the first-generated products. The degradation of Nap in the aqueous solution was probably initiated by photoionization, and the reaction rate constant (between 1.44 × 10^-4 min^-1 and 8.55 × 10^-4 min^-1) was much lower than that of Nap with hydroxyl radicals. Instead of inducing or promoting the chemical change in Nap, the AD particles slowed photodegradation due to the extinction of radiation. Therefore, it is inferred that natural AD particles have no substantial effect on the transportation and transformation of PAHs in the atmosphere.

Adsorption of Polycyclic Aromatic Hydrocarbons from aqueous solution by Organic Montmorillonite Sodium Alginate Nanocomposites

The adsorption method is generally considered a promising technique to remove inorganic and organic contaminants in an economically and environmentally friendly superior manner. In this study, organic montmorillonite sodium alginate composites were prepared, in which, montmorillonite and cationic surfactant (cetyltrimethylammonium bromide, CTAB) in different added amounts were coagulated with sodium alginate using CaCl₂ as the crosslinking agent. The morphological properties of the composites were characterized thoroughly and employed in three typical target pollutants of polycyclic aromatic hydrocarbons (PAHs) (acenaphthene, fluorene, and phenanthrene) by batch adsorption experiments from aqueous solution. The composites provide an efficient alternative for PAHs removals. The composites could be stably separated and regenerated with methyl alcohol. Furthermore, the adsorption kinetic and isotherm data were well described by the Elovich kinetic and the Freundlich isotherm model, respectively. According to these, the adsorption process occurred via multilayer adsorption on the composite's energetically heterogeneous surface. Moreover, pore diffusion and hydrophobicity played a dominant role in the adsorption mechanism. Overall, our study offers a developed adsorbent that has the advantage of being recyclable, low cost, biodegradable and biocompatible for effectively removing PAHs from aqueous solution.

Tetracycline Photocatalytic Degradation under CdS Treatment

Industrialization and the growing consumption of medicines leads to global aquatic contamination. One of the antibiotics widely used against bacterial infections in both human and veterinary medicine is tetracycline. Despite its positive antibiotic action, tetracycline is resistant against degradation, and therefore it accumulates in the environment, including the aquatic environment, creating great health hazards, possibly stimulating antibiotic resistance of pathogenic organisms. In this research, aqueous suspensions of semiconductor nanoparticles CdS were used for photocatalytic activity studies in the presence of methylene blue as a model compound, and finally, in the presence of tetracycline, a broad-spectrum antibiotic widely used against bacterial infections, as well as a live-stock food additive. The mechanism and kinetic rate constants of photocatalytic degradation processes of methylene blue and tetracycline were described in correlation with the energy diagram of CdS nanoparticles.

Removal of persistent organic pollutants (POPs) from waters and wastewaters by the use of ionizing radiation

The most important advantages of the use of ionizing radiation over other AOPs are exceptionally efficient in situ generation of very reactive oxidizing free radicals ^•OH from water radiolysis and very unique simultaneous generation of strongly reducing hydrated electrons. They allow to carry out Advanced Oxidation and Reduction Processes (AO/RPs) simultaneously. Carrying out only oxidative or reductive processes is also possible by the use of appropriate scavengers of free radicals in irradiated solutions. For the application of these processes for environmental protection purposes gamma-rays from radioisotope sources or beams of accelerated electrons are most commonly used. In the case of particularly resistant POPs some chemical additives to the irradiated solutions may enhance the yield of decomposition. This review based on 125 references reported so far presents the applications of the discussed technology in removing POPs from waters and wastewaters, including pesticides listed among POPs, dioxins, polychlorinated biphenyls, polycyclic aromatic hydrocarbons and selected perfluorinated surfactants.

Comprehensive review of polycyclic aromatic hydrocarbons in water sources, their effects and treatments

Polycyclic aromatic hydrocarbons (PAHs) are principally derived from the incomplete combustion of fossil fuels. This study investigated the occurrence of PAHs in aquatic environments around the world, their effects on the environment and humans, and methods for their removal. Polycyclic aromatic hydrocarbons have a great negative impact on the humans and environment, and can even cause cancer in humans. Use of good methods and equipment are essential to monitoring PAHs, and GC/MS and HPLC are usually used for their analysis in aqueous solutions. In aquatic environments, the PAHs concentrations range widely from 0.03 ng/L (seawater; Southeastern Japan Sea, Japan) to 8,310,000 ng/L (Domestic Wastewater Treatment Plant, Siloam, South Africa). Moreover, bioaccumulation of ∑16PAHs in fish has been reported to range from 11.2 ng/L (Cynoscion guatucupa, South Africa) to 4207.5 ng/L (Saurida undosquamis, Egypt). Several biological, physical and chemical and biological techniques have been reported to treat water contaminated by PAHs, but adsorption and combined treatment methods have shown better removal performance, with some methods removing up to 99.99% of PAHs.

Interaction of benzo[a]pyrene with Cu(II)-montmorillonite: Generation and toxicity of environmentally persistent free radicals and reactive oxygen species

This paper presents the interaction of benzo[a]pyrene (B[a]P) with Cu(II)-montmorillonite to investigate the formation, evolution and potential toxicity of environmentally persistent free radicals (EPFRs) under dark and visible light irradiation conditions. Degradation of B[a]P and the generated transformative products on clay mineral are monitored by gas chromatography-mass spectrometry (GC-MS) technique. Hydroxyl-B[a]P and B[a]P-diones are observed during the transformation of B[a]P under dark condition. B[a]P-3,6-dione and B[a]P-6,12-dione are the main products under visible light irradiation. B[a]P transformation is accompanied by the formation of EPFRs, which are quantified by electron paramagnetic resonance (EPR) spectroscopy. With increasing reaction time, the concentrations of the produced EPFRs are initially increased and then gradually decrease to an undetectable level. The deconvolution results of EPR spectra reveal formation of three types of organic radicals (carbon-centered radicals, oxygen-centered radicals, and carbon-centered radicals with a conjugated oxygen), which also co-exist. Correspondingly, visible-light irradiation promotes the formation and the decay of these EPFRs. The produced B[a]P-type EPFRs induce the generation of reactive oxygen species (ROS), such as superoxide (O₂^-) and hydroxide radicals (OH), which may cause oxidative stress to cells and tissues of organisms. The toxicity of degradation products is evaluated by the livability of human gastric epithelial GES-1cells. The toxicity is initially increased and then decreases with the elapsed reaction time, which correlates with the evolution of EPFRs concentrations. The present work provides direct evidence that the formation of EPFRs in interaction of PAHs with metal-contaminated clays may result in negative effects to human health.

Release of PAHs and heavy metals in coastal environments linked to leisure boats

Leisure boats are responsible for elevated levels of heavy metals and PAHs in sediments in- and near marinas and natural harbours. As these compounds are released directly into the water column they also pose a threat to organisms in the pelagic environment. Passive samplers were deployed during peak and post tourist season in the water column of natural harbours, leisure boat waterways and small marinas to measure the dissolved fraction of PAHs and metal ions. Differences between seasons indicative of leisure boat activities were found as PAH composition differed between peak and post season for natural harbours and waterways, where heavier PAHs increased during peak season. During peak season, metal samplers were covered by biofouling, which likely affected the uptake. Post season metal concentrations differ between locations, with concentrations exceeding quality standards at near mainland locations where boats are maintained, compared to the sites in the archipelago.