From nanoemulsions to self-nanoemulsions, with recent advances in self-nanoemulsifying drug delivery systems (SNEDDS)

Current Advances in Lipid-Based Drug Delivery Systems as Nanocarriers for the Management of Female Genital Tuberculosis

Female genital tuberculosis (FGTB) arises from Mycobacterium tuberculosis infection and can rarely be caused by Mycobacterium bovis or atypical mycobacteria. FGTB usually arises from tuberculosis (TB) that affects the lungs or other organs. The infection can enter the vaginal tract directly from abdominal TB or by hematogenous or lymphatic pathways. Menstrual dysfunction and infertility as a result of genital organ damage result from FGTB, which affects women's fallopian tubes, uterine endometrium, and ovaries. Consequently, FGTB remains a major worldwide health risk, posing challenges in its treatment due to the limited effectiveness of existing drugs and the resilient nature of the TB pathogen. Moreover, currently available antimicrobial drugs for FGTB suffer from inadequate bioavailability. Long treatment regimens are necessary because high doses often result in patient noncompliance and the emergence of drug-resistant strains of TB. Therefore, to improve TB therapy generally, especially FGTB, novel drug delivery techniques are essential. Because targeted drug delivery systems have the benefit of delivering higher drug concentrations directly to the infection site, fewer side effects have been reported. As a result, various lipid-based drug delivery systems as nanocarriers have been identified as successful antimicrobial drug delivery options, indicating their potential for treating FGTB.

Optimization of Glibenclamide Loaded Thermoresponsive SNEDDS Using Design of Experiment Approach: Paving the Way to Enhance Pharmaceutical Applicability

Thermoresponsive self-nanoemulsifying drug delivery systems (T-SNEDDS) offer a promising solution to the limitations of conventional SNEDDS formulations. Liquid SNEDDS are expected to enhance drug solubility; however, they are susceptible to leakage during storage. Even though solid SNEDDS offers a solution to this storage instability, they introduce new challenges, namely increased total dosage and potential for drug trapping within the formulation. The invented T-SNEDDS was used to overcome these limitations and improve the dissolution of glibenclamide (GBC). Solubility and transmittance studies were performed to select a suitable oil and surfactant. Design of Experiments (DoE) software was used to study the impact of propylene glycol and Poloxamer 188 concentrations on measured responses (liquefying temperature, liquefying time, and GBC solubility). The optimized formulation was subjected to an in vitro dissolution study. The optimized T-SNEDDS consisted of Kolliphor EL and Imwitor 308 as surfactants and oil. The optimized propylene glycol and Poloxamer 188 concentrations were 13.7 and 7.9% w/w, respectively. It exhibited a liquefying temperature of 35.0 °C, a liquefying time of 119 s, and a GBC solubility of 5.51 mg/g. In vitro dissolution study showed that optimized T-SNEDDS exhibited 98.8% dissolution efficiency compared with 2.5% for raw drugs. This study presents a promising approach to enhance pharmaceutical applicability by resolving the limitations of traditional SNEDDS.

Self-Nanoemulsifying Drug Delivery System Combined with a Polymeric Amorphous System of Glibenclamide for Enhanced Drug Dissolution and Stability

Self-nanoemulsifying drug delivery systems (SNEDDS) have been widely applied to improve the dissolution and bioavailability of hydrophobic medications like glibenclamide (GB). However, the acid liability of GB limits its loading in SNEDDS formulation owing to the expected drug degradation. The present study investigated the ability of a polymeric amorphous system (PAS) to amorphize raw GB and facilitate its integration within dispersed SNEDDS. Liquid-SNEDDS (L-SNEDDS), solid-SNEDDS (S-SNEDDS), and combined systems (SNEDDS + PAS) were prepared for this purpose. The physicochemical properties of the prepared formulations were examined using a zeta-sizer, SEM, DSC, PXRD, and dissolution apparatus. In addition, GB integrity within formulations following incubation in a stability chamber was also investigated. The prepared formulations were able to be dispersed within the nanosize range. SEM, DSC, and PXRD showed that freeze-drying (FD) was superior to the microwave (MW) method in GB amorphization. Even though L-SNEDDS and S-SNEDDS were able to increase the dissolution efficiency (DE) of GB, drug degradation was observed. However, PAS prepared using FD was able to increase the DE of GB from 2.5% to 84.2% and protect the drug from chemical degradation. The present study revealed that a combined system (SNEDDS + PAS) is a promising approach to enhance the stability of acid-labile drugs and facilitate the integration of amorphous drugs within a dispersed SNEDDS formulation.

Development and Characterization of Olaparib-Loaded Solid Self-Nanoemulsifying Drug Delivery System (S-SNEDDS) for Pharmaceutical Applications

This study aims to enhance the solubility of Olaparib, classified as biopharmaceutical classification system (BCS) class IV due to its low solubility and bioavailability using a solid self-nanoemulsifying drug delivery system (S-SNEDDS). For this purpose, SNEDDS formulations were created using Capmul MCM as the oil, Tween 80 as the surfactant, and PEG 400 as the co-surfactant. The SNEDDS formulation containing olaparib (OLS-352), selected as the optimal formulation, showed a mean droplet size of 87.0 ± 0.4 nm and drug content of 5.53 ± 0.09%. OLS-352 also demonstrated anticancer activity against commonly studied ovarian (SK-OV-3) and breast (MCF-7) cancer cell lines. Aerosil® 200 and polyvinylpyrrolidone (PVP) K30 were selected as solid carriers, and S-SNEDDS formulations were prepared using the spray drying method. The drug concentration in S-SNEDDS showed no significant changes (98.4 ± 0.30%, 25℃) with temperature fluctuations during the 4-week period, demonstrating improved storage stability compared to liquid SNEDDS (L-SNEDDS). Dissolution tests under simulated gastric and intestinal conditions revealed enhanced drug release profiles compared to those of the raw drug. Additionally, the S-SNEDDS formulation showed a fourfold greater absorption in the Caco-2 assay than the raw drug, suggesting that S-SNEDDS could improve the oral bioavailability of poorly soluble drugs like olaparib, thus enhancing therapeutic outcomes. Furthermore, this study holds significance in crafting a potent and cost-effective pharmaceutical formulation tailored for the oral delivery of poorly soluble drugs.

Solid Self Nano-Emulsifying Drug Delivery System of Dasatinib: Optimization, In-vitro, Ex-vivo and In-vivo assessment

Aim: Dasatinib (DST) is an oral tyrosine kinase inhibitor with poor aqueous solubility. To outwit this issue, a solid self-nano emulsifying drug delivery system (S-SNEDDS) of DST was formulated.Methods: I-optimal mixture design was used for optimization of DST-loaded SNEDDS using Linalool, Cremophor RH40 and Transcutol P. S-SNEDDS underwent physicochemical characterization, in-vitro release and ex-vivo permeation, cell-based assays and pharmacokinetic study.Results: DST-S-SNEDDS showed globule size and PDI of 141.53 ± 5.371 nm and 0.282 ± 0.020, respectively. DST-S-SNEDDS revealed significantly lower IC50 (1.825 μg/mL) than free DST (7.298 μg/mL) in MDA-MB-231. In-vivo pharmacokinetic study revealed 1.94-fold increment in AUC0-t for the DST-S-SNEDDS group than free DST.Conclusion: S-SNEDDS could be promising approach for improving bioavailability and efficacy of DST.

Gallic acid loaded self-nano emulsifying hydrogel-based drug delivery system against onychomycosis

Aim: To developed and investigate gallic acid (GA) loaded self-nanoemulsifying drug delivery systems (SNEDDS) for treating onychomycosis via transungual route.Materials & methods: The SNEDDS were prepared by direct dispersion technique and were evaluated for characteristics parameters using Fourier transform infrared, differential scanning calorimetry, confocal microscopy, transmission electron microscopy and zeta sizer. Furthermore, the safety of prepared formulation was evaluated via Hen's egg test-chorioallantoic membrane study and stability was confirmed using different parameters. Also, its effectiveness was evaluated against fungal strain Trichophyton mentagrophytes.Results: The SNEDDS displayed a particle size of 199.8 ± 4.21 nm and a zeta potential; of -22.75 ± 2.09 mV. Drug release study illustrated a sustained release pattern with a release of 70.34 ± 0.20% over a period of 24 h. The penetration across the nail plate was found to be 1.59 ± 0.002 µg/mg and 0.97 ± 0.001 µg/mg for GA loaded SNEDDS and GA solution respectively. An irritation score of 0.52 ± 0.005 and 3.84 ± 0.001 was reported for GA loaded SNEDDS hydrogel and GA solution, indicating a decrease in the drug's irritation potential from slightly irritating to non irritating due to its entrapment within the SNEDDS.Conclusion: GA loaded SNEDDS has potential to address limitations of conventional treatments, enhancing the drug's efficacy and reducing the likelihood of resistance in the treatment of Onychomycosis.

Quercetin-loaded nanoemulsions prevent Scopolamine-induced neurotoxicity in male rats

Quercetin (QCT) is well-known as a neuroprotective agent due to its antioxidant capacities and reinstating mitochondrial functions. Scopolamine is commonly used as a model to induce Alzheimer's disease (AD-like) symptoms. The current study develops QCT-loaded nanoemulsion (QCT-NE) accompanied by evaluating its neuro-therapeutic effectiveness against SCO-induced neurotoxicity in male rats. The QCT-NE was prepared by the spontaneous emulsification technique and characterized by using particle size, zeta potential, drug loading, in vitro drug release behavior, and stability studies. In vivo studies were done on adult Wistar rats by applying the Morris water maze (MWM) test to study spatial memory and learning. The levels of lipid peroxidation and reduced glutathione were quantitatively determined to reveal the potential mechanism of SCO-induced oxidative stress. Finally, histological studies were performed using staining techniques. The QCT-NE particle size, zeta potential, polydispersity index (PDI), and DL were obtained at 172.4 ± 16.8 nm, -29 ± 0.26 mV, 0.3 ± 0.07, and 81.42 ± 9.14 %, respectively. The QCT and more effectively QCT-NE reduced the elevation of neurobehavioral abnormalities in the MWM test in SCO-exposed rats. The results of oxidative status showed that SCO significantly could increase the LPO and decrease the GSH levels in the rat's brain. However, QCT-NE treatment was more effective than free QCT to inhibit oxidative damage and was well correlated with histopathological findings. Taken together, QCT-NE, compared to QCT, was superior in ameliorating SCO-induced AD-like symptoms due to its better neuroprotective activity and can be considered a novel supplementary therapeutic agent in AD management.

Triamcinolone-loaded self nano-emulsifying drug delivery systems for ocular use: An alternative to invasive ocular surgeries and injections

Inflammation of the posterior segment of the eye is a severe condition and hard to cure as delivery of drugs to the inflammation site is inefficient. Currently, the primary treatment approach is ocular surgery or invasive ocular injections. Herein, we designed and developed a topically self nano-emulsifying drug delivery system (SNEDDs) to deliver triamcinolone acetonide (TCA) to the posterior segment of the eye. A screening based on TCA solubility was conducted on each excipient followed by preparation of various formulations using different ratios of the selected excipients. Vesicles of optimized SNEDDs had less than 100 nm size and spherical morphology. 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay showed self-emulsified vesicles have relatively high safety on retinal pigment epithelium (RPE) cell line. Furthermore, efficient cellular uptake of coumarin 6-loaded SNEDDs in RPE using confocal laser scanning microscopy (CLSM) was confirmed. In addition, an in-vivo study using hematoxylin and eosin (H&E) staining revealed that 14 days of topical treatment of albino rabbit eyes with TCA-loaded SNEDDs was safe and no sign of tissue destruction and inflammation was detected in different parts of the eye sections including cornea, sclera, retina, and optic nerve. Also, the CLSM images from topically treated eyes with coumarin 6 (a hydrophobic, fluorescent drug model) loaded SNEDDs, showed that the optimized SNEDDs could properly penetrate toward the posterior segments of the eye especially the retina, posterior parts of the choroid, and sclera. Considering the outstanding results obtained by ocular tissue penetration and low toxicity, prepared SNEDDs, have the potential to be used as a topical administration for treating posterior segment disorders of the eye through an utterly non-invasive route and TCA-loaded SNEDDs could be an alternative for TCA intravitreal and intra conjunctival injections.

Novel nano-drug delivery system for natural products and their application

The development of natural products for potential new drugs faces obstacles such as unknown mechanisms, poor solubility, and limited bioavailability, which limit the broadened applicability of natural products. Therefore, there is a need for advanced pharmaceutical formulations of active compounds or natural products. In recent years, novel nano-drug delivery systems (NDDS) for natural products, including nanosuspensions, nanoliposomes, micelle, microemulsions/self-microemulsions, nanocapsules, and solid lipid nanoparticles, have been developed to improve solubility, bioavailability, and tissue distribution as well as for prolonged retention and enhanced permeation. Here, we updated the NDDS delivery systems used for natural products with the potential enhancement in therapeutic efficiency observed with nano-delivery systems.

Formulating Resveratrol and Melatonin Self-Nanoemulsifying Drug Delivery Systems (SNEDDS) for Ocular Administration Using Design of Experiments

Recent studies have demonstrated that Sirtuin-1 (SIRT-1)-activating molecules exert a protective role in degenerative ocular diseases. However, these molecules hardly reach the back of the eye due to poor solubility in aqueous environments and low bioavailability after topical application on the eye's surface. Such hindrances, combined with stability issues, call for the need for innovative delivery strategies. Within this context, the development of self-nanoemulsifying drug delivery systems (SNEDDS) for SIRT-1 delivery can represent a promising approach. The aim of the work was to design and optimize SNEDDS for the ocular delivery of two natural SIRT-1 agonists, resveratrol (RSV) and melatonin (MEL), with potential implications for treating diabetic retinopathy. Pre-formulation studies were performed by a Design of Experiment (DoE) approach to construct the ternary phase diagram. The optimization phase was carried out using Response Surface Methodology (RSM). Four types of SNEDDS consisting of different surfactants (Tween® 80, Tween® 20, Solutol® HS15, and Cremophor® EL) were optimized to achieve the best physico-chemical parameters for ocular application. Stability tests indicated that SNEDDS produced with Tween® 80 was the formulation that best preserved the stability of molecules, and so it was, therefore, selected for further technological studies. The optimized formulation was prepared with Capryol® PGMC, Tween® 80, and Transcutol® P and loaded with RSV or MEL. The SNEDDS were evaluated for other parameters, such as the mean size (found to be ˂50 nm), size homogeneity (PDI < 0.2), emulsion time (around 40 s), transparency, drug content (>90%), mucoadhesion strength, in vitro drug release, pH and osmolarity, stability to dilution, and cloud point. Finally, an in vitro evaluation was performed on a rabbit corneal epithelial cell line (SIRC) to assess their cytocompatibility. The overall results suggest that SNEDDS can be used as promising nanocarriers for the ocular drug delivery of RSV and MEL.

Development of a novel squalene/α-tocopherol-based self-emulsified nanoemulsion incorporating Leishmania peptides for induction of antigen-specific immune responses

Vaccination has emerged as the most effective strategy to confront infectious diseases, among which is leishmaniasis, that threat public health. Despite laborious efforts there is still no vaccine for humans to confront leishmaniasis. Multi-epitope protein/peptide vaccines present a number of advantages, however their use along with appropriate adjuvants that may also act as antigen carriers is considered essential to overcome subunit vaccines' low immunogenicity. In the present study, a stable self-emulsified nanoemulsion was developed and double-adjuvanted with squalene and α-tocopherol. The prepared nanoemulsion droplets exhibited low cytotoxicity in a certain range of concentrations, while they were efficiently taken up by macrophages and dendritic cells in vitro as well as in vivo in secondary lymphoid organs. To further characterize nanoformulation's potent antigen delivery capability, three multi-epitope Leishmania peptides were incorporated into the nanoemulsion. Peptide encapsulation resulted in dendritic cells' functional differentiation characterized by elevated levels of maturation markers and intracellular cytokine production. Intramuscular administration of the nanoemulsion incorporating Leishmania peptides induced antigen-specific spleen cell proliferation as well as elicitation of CD4+ central memory cells, supporting the potential of the developed nanoformulation to successfully act also as an antigen delivery vehicle and thus encouraging further preclinical studies on its vaccine candidate potency.

A Comprehensive Guide to the Development, Evaluation, and Future Prospects of Self-nanoemulsifying Drug Delivery Systems for Poorly Water-soluble Drugs

Self-nano Emulsifying Drug Delivery Systems (SNEDDS) are novel formulations that can enhance the solubility and bioavailability of poorly water-soluble drugs. SNEDDS are composed of lipids, surfactants, co-solvents, and drugs and can spontaneously form nanoemulsions when mixed with water under mild agitation. SNEDDS can be formulated as liquid or solid dosage forms and can improve drug absorption by increasing the interfacial area, protecting the drug from degradation, and facilitating lymphatic transport. SNEDDS is characterized by various parameters such as particle size, zeta potential, droplet morphology, emulsification efficiency, drug solubility, and stability. SNEDDS offers several advantages over conventional dosage forms, such as dose reduction, faster onset of action, reduced variability, versatility, and ease of formulation. However, SNEDDS also face some limitations and challenges, such as drug precipitation, cost-effectiveness, compatibility with capsule shells, and lack of predictive in vitro models. SNEDDS has a promising future in the field of pharmaceuticals, especially for personalized medicine and targeted drug delivery.

Lipid Nano-System Based Topical Drug Delivery for Management of Rheumatoid Arthritis: An Overview

The overall purpose of rheumatoid arthritis (RA) treatment is to give symptomatic alleviation; there is no recognized cure for RA. Frequent use of potent drugs like non-steroidal anti-inflammatory drugs (NSAIDs) and disease-modifying antirheumatic drugs (DMARDs), lead to various adverse effects and patient compliance suffers. On the other hand, there are many drawbacks associated with traditional methods, such as high first pass, high clearance rate, and low bioavailability. Drug administration through the skin can be a promising alternative to cope with these drawbacks, increasing patient compliance and providing site-specific action. The stratum corneum, the uppermost non-viable epidermal layer, is one of the primary limiting barriers to skin penetration. Various nanocarrier technologies come into play as drug vehicles to help overcome these barriers. The nanocarrier systems are biocompatible, stable, and have a lower cytotoxic impact. The review discusses several lipid-based nanocarrier systems for anti-rheumatic medicines for topical administration it also discusses in-vivo animal models for RA and provides information on patents granted.

Development of a Multifunctional Oral Dosage Form via Integration of Solid Dispersion Technology with a Black Seed Oil-Based Self-Nanoemulsifying Drug Delivery System

Lansoprazole (LZP) is used to treat acid-related gastrointestinal disorders; however, its low aqueous solubility limits its oral absorption. Black seed oil (BSO) has gastroprotective effects, making it a promising addition to gastric treatment regimens. The present study aims to develop a stable multifunctional formulation integrating solid dispersion (SD) technology with a bioactive self-nanoemulsifying drug delivery system (SNEDDS) based on BSO to synergistically enhance LZP delivery and therapeutic effects. The LZP-loaded SNEDDS was prepared using BSO, Transcutol P, and Kolliphor EL. SDs were produced by microwave irradiation and lyophilization using different polymers. The formulations were characterized by particle apparent hydrodynamic radius analysis, zeta potential, SEM, DSC, PXRD, and in vitro dissolution testing. Their chemical and physical stability under accelerated conditions was also examined. Physicochemical characterization revealed that the dispersed systems were in the nanosize range (<500 nm). DSC and PXRD studies revealed that lyophilization more potently disrupted LZP crystallinity versus microwave heating. The SNEDDS effectively solubilized LZP but degraded completely within 1 day. Lyophilized SDs with Pluronic F-127 demonstrated the highest LZP dissolution efficiency (3.5-fold vs. drug) and maintained chemical stability (>97%) for 1 month. SDs combined with the SNEDDS had variable effects suggesting that the synergistic benefits were dependent on the formulation and preparation method. Lyophilized LZP-Pluronic F127 SD enabled effective and stable LZP delivery alongside the bioactive effects of the BSO-based SNEDDS. This multifunctional system is a promising candidate with the potential for optimized gastrointestinal delivery of LZP and bioactive components.

Bioinspired fine-tuning of the mechanical rigidity of SNEDDS for the efficient crossing of multiple gastrointestinal barriers

Nanoproperties, such as size, charge, and rigidity, have been demonstrated to be crucial for nanovehicles to overcome numerous gastrointestinal obstacles. However, the facile approach of modifying the rigidity of nanovehicles remains scarce, limiting understanding of how rigidity impacts their oral delivery. Inspired by the fact that cellular phospholipid content regulates plasma membrane rigidity, the rigidity of self-nanoemulsifiying drug delivery system (SNEDDS) could be fine-tuned via phosphocholine content while their size and zeta potential remain unchanged, using insulin as a model drug. Notably, soft SNEDDS exerted longer gastrointestinal transit time, higher drug release rate, stronger gastrointestinal stability and relatively lower mucus permeation but superior epithelial transcytosis than their hard counterparts in a macropinocytosis-dependent manner. The rigidity-related enhanced transcytosis was attributed to improved endocytosis, lysosome escape capability and exocytosis. Rats with type 1 diabetes exhibited greater oral insulin absorption and blood glucose lowering effect with soft SNEDDS. This study demonstrated the regulatory role of phospholipids in nanovehicle rigidity, which could help develop mechanically optimized nanomedicines in the future.

Recent Update on Nanoemulsion Impregnated Hydrogel: a Gleam into the Revolutionary Strategy for Diffusion-Controlled Delivery of Therapeutics

Since earlier times, dermatological remedies have been utilized to treat diseases associated with pain, irritation, and skin conditions. Compared to other routes of drug delivery, topical delivery of drugs offers several benefits. Scientists are investigating different alterations in dosage forms in addition to existing topical formulations such as ointments, gels, creams, lotions, and ointments to significantly improve the permeation of drugs and enhance the pharmacological efficacy of medications that are poorly absorbed via the skin. Conventional formulations have a plethora of problems viz. poor absorption, no target specificity, low spreadability, and inadequate bioavailability which leads the researchers toward developing novel formulations like nanoemulsions. The nanoemulsion can enhance the gradient in concentration and thermodynamic movement toward the epidermis and enhance the penetration of its constituents. However, due to its difficult application, nanoemulsion's lower viscosity limited its use in transdermal delivery. Thus, the development of nanoemulsion-based hydrogels has shown to be a successful strategy for removing obstacles from existing drug formulations. The simple application, expedient spreadability, non-stickiness, safety, and effectiveness of nanoemulsion-based hydrogel have led to substantial growth in their research in recent years. This review gives a brief idea about the prevalence of skin diseases, skin as an obstacle for drug delivery, and recent research insights to combat these obstacles. The work highlights the mechanism of drug release via nanoemulsion, hydrogels, and nanoemulsion-based hydrogels with reference to recent research on hydrophobic and hydrophilic drugs.

Oral insulin delivery: Barriers, strategies, and formulation approaches: A comprehensive review

Diabetes Mellitus is characterized by a hyperglycemic condition which can either be caused by the destruction of the beta cells or by the resistance developed against insulin in the cells. Insulin is a peptide hormone that regulates the metabolism of carbohydrates, proteins, and fats. Type 1 Diabetes Mellitus needs the use of Insulin for efficient management. However invasive methods of administration may lead to reduced adherence by the patients. Hence there is a need for a non-invasive method of administration. Oral Insulin has several merits over the conventional method including patient compliance, and reduced cost, and it also mimics endogenous insulin and hence reaches the liver by the portal vein at a higher concentration and thereby showing improved efficiency. However oral Insulin must pass through several barriers in the gastrointestinal tract. Some strategies that could be utilized to bypass these barriers include the use of permeation enhancers, absorption enhancers, use of suitable polymers, use of suitable carriers, and other agents. Several formulation types have been explored for the oral delivery of Insulin like hydrogels, capsules, tablets, and patches which have been described briefly by the article. A lot of attempts have been made for developing oral insulin delivery however none of them have been commercialized due to numerous shortcomings. Currently, there are several formulations from the companies that are still in the clinical phase, the success or failure of some is yet to be seen in the future.

Atorvastatin-loaded pro-nanolipospheres with ameliorated oral bioavailability and antidyslipidemic activity

Despite significant advances in oral drug delivery technologies, many drugs are prone to limited oral bioavailability due to biological barriers that hinder drug absorption. Pro-nanolipospheres (PNL) are a form of delivery system that can potentiate the oral bioavailability of poorly water-soluble drugs through a variety of processes, including increased drug solubility and protecting them from degradation by intestinal or hepatic first-pass metabolism. In this study, pro-nanolipospheres were employed as a delivery vehicle for improving the oral bioavailability of the lipophilic statin, atorvastatin (ATR). Various ATR-loaded PNL formulations, composed of various pharmaceutical ingredients, were prepared by the pre-concentrate method and characterized by determining particle size, surface charge, and encapsulation efficiency. An optimized formula (ATR-PT PNL) showing the smallest particle size, highest zeta potential, and highest encapsulation efficiency was selected for further in vivo investigations. The in vivo pharmacodynamic experiments demonstrated that the optimized ATR-PT PNL formulation exerted a potent hypolipidemic effect in a Poloxamer® 407-induced hyper-lipidaemia rat model by restoring normal cholesterol and triglyceride serum levels along with alleviating serum levels of LDL while elevating serum HDL levels, compared to pure drug suspensions and marketed ATR (Lipitor®). Most importantly, oral administration of the optimized ATR-PT PNL formulation showed a dramatic increase in ATR oral bioavailability, as evinced by a 1.7- and 3.6-fold rise in systemic bioavailability when compared with oral commercial ATR suspensions (Lipitor®) and pure drug suspension, respectively. Collectively, pro-nanolipospheres might represent a promising delivery vehicle for enhancing the oral bioavailability of poorly water-soluble drugs.

Role of Tau in Various Tauopathies, Treatment Approaches, and Emerging Role of Nanotechnology in Neurodegenerative Disorders

A few protein kinases and phosphatases regulate tau protein phosphorylation and an imbalance in their enzyme activity results in tau hyper-phosphorylation. Aberrant tau phosphorylation causes tau to dissociate from the microtubules and clump together in the cytosol to form neurofibrillary tangles (NFTs), which lead to the progression of neurodegenerative disorders including Alzheimer's disease (AD) and other tauopathies. Hence, targeting hyperphosphorylated tau protein is a restorative approach for treating neurodegenerative tauopathies. The cyclin-dependent kinase (Cdk5) and the glycogen synthase kinase (GSK3β) have both been implicated in aberrant tau hyperphosphorylation. The limited transport of drugs through the blood-brain barrier (BBB) for reaching the central nervous system (CNS) thus represents a significant problem in the development of drugs. Drug delivery systems based on nanocarriers help solve this problem. In this review, we discuss the tau protein, regulation of tau phosphorylation and abnormal hyperphosphorylation, drugs in use or under clinical trials, and treatment strategies for tauopathies based on the critical role of tau hyperphosphorylation in the pathogenesis of the disease. Pathology of neurodegenerative disease due to hyperphosphorylation and various therapeutic approaches including nanotechnology for its treatment.

Optimization and characterization of self-nanoemulsifying drug delivery system of iloperidone using box-behnken design and desirability function

PURPOSE

Iloperidone (IP) is an antipsychotic drug which belongs to Biopharmaceutical Classification System (BCS) II exhibiting poor aqueous solubility. The current investigation explores the possibility of enhancement of solubility and dissolution characteristics of IP by formulation of liquid self-nano emulsifying drug delivery system (L-SNEDDS) utilizing Box-Behnken Design (BBD) and desirability function.

METHODS

The oils, surfactants and co-surfactants used in the study were selected based on solubility of the drug and their emulsification ability. Optimization of the formulation was performed using BBD by employing four response variables such as globule size (nm), percentage transmittance (%), self-emulsification time (sec) and percent drug released in 15min. 2D contour plots and 3D response surface plots were constructed using Design Expert software.

RESULTS

The developed optimal L-SNEDDS of IP through BBD approach resulted in improvement of solubility and dissolution rate as compared with the pure drug. Based on desirability function, optimized formulation was prepared and was assessed for response variables (globule size, percentage transmittance, self-emulsification time and percent drug dissolved in 15min). The characterization studies revealed droplet size to be 21.80±2.41nm, 99.584±0.65% transmittance, 24.43±2.12sec emulsification time and 95.31±1.57% cumulative drug release in 15min.

CONCLUSION

The results conclude the potentiality of prepared L-SNEDDS in improving solubility and dissolution rate of IP.

Self-nanoemulsifying drug delivery systems (SNEDDS) of anti-cancer drugs: a multifaceted nanoplatform for the enhancement of oral bioavailability

OBJECTIVE

A significant problem faced by the health care industry today is that though there are numerous drugs available to tackle diseases like cancer, their intrinsic properties make it difficult to be delivered to patients in a feasible manner. One of the key players that have helped researchers overcome poor solubility and permeability of drugs is Nanotechnology, this article further iterates on the same.

SIGNIFICANCE

Nanotechnology is used as an umbrella term in pharmaceutics and describes under it multiple technologies. Upcoming nanotechnology is a Self Nanoemulsifying System which is considered to be a futuristic delivery system both due to its scientific simplicity and relative ease of patient delivery.

METHODS

Self-Nano Emulsifying Drug Delivery Systems (SNEDDS) are homogenous lipidic concoctions containing the drug solubilized in the oil phase and surfactants. The choice of components depends on the physicochemical properties of the drugs, the solubilization capability of oils and the physiological fate of the drug. The article contains further details of various methodologies that have been adopted by scientists to formulate and optimize such systems in order to make anticancer drugs orally deliverable.

RESULTS

The results that have been generated by scientists across the globe have been summarized in the article and all of the data supports the claim that SNEDDS significantly enhance the solubility and bioavailability of hydrophobic anticancer drugs.

CONCLUSIONS

This article mainly provides the application of SNEDDS in cancer therapy and concludes to provide a step for the oral administration of several BCS class II and IV anticancer drugs.

The Trend of Organic Based Nanoparticles in the Treatment of Diabetes and Its Perspectives

Diabetes is an untreatable metabolic disorder characterized by alteration in blood sugar homeostasis, with submucosal insulin therapy being the primary treatment option. This route of drug administration is attributed to low patient comfort due to the risk of pain, distress, and local inflammation/infections. Nanoparticles have indeed been suggested as insulin carriers to allow the drug to be administered via less invasive routes other than injection, such as orally or nasally. The organic-based nanoparticles can be derived from various organic materials (for instance, polysaccharides, lipids, and so on) and thus are prevalently used to enhance the physical and chemical consistency of loaded bioactive compounds (drug) and thus their bioavailability. This review presents various forms of organic nanoparticles (for example, chitosan, dextron, gums, nanoemulsion, alginate, and so on) for enhanced hypoglycemic drug delivery relative to traditional therapies.

Microemulsions Enhance the In Vitro Antioxidant Activity of Oleanolic Acid in RAW 264.7 Cells

Oleanolic acid (OA) is the main triterpenic acid of olive leaves known for numerous pharmacological properties, including antioxidant activity. However, it is poorly soluble in water and consequently with low bioavailability, which limits its pharmacological application. Microemulsions (MEs) are dispersed systems consisting of two immiscible phases that promote rapid solubilization and absorption in the gastrointestinal tract. To improve both solubility and intestinal permeability of this molecule, OA has been formulated in two different microemulsions (ME-1 and ME-2). A solubility screening was carried out to select the ME components, and pseudoternary phase diagrams were constructed to evaluate the region of existence and select the appropriate amount of the constituents. ME-1 was prepared using Capmul PG-8/NF as the oily phase, and Transcutol and Tween 20 (7:3) as surfactants, while ME-2 contained Nigella oil and Isopropil myristate as the oily phase, and Transcutol HP and Cremophor EL (2:1) as surfactants. The OA solubility was increased by 1000-fold and 3000-fold in ME-1-OA and ME-2-OA, respectively. The MEs’ droplet size and the PdI were evaluated, and the stability was assessed for 8 weeks by monitoring chemical and physical parameters. The parallel artificial membrane permeability assay (PAMPA) also demonstrated an enhanced intestinal permeability of both OA formulations compared with free OA. The potential ability of both MEs to enhance the bioactivity of OA against LPS-induced oxidative stress in RAW 264.7 murine macrophages was also investigated. Overall, this study suggests that both MEs promote a bio-enhancement of the protective action of OA against the LPS-induced pro-oxidant stress in macrophages. Overall, this study suggests that MEs could be an interesting formulation to improve OA oral bioavailability with potential clinical applications.

Pharmaceutical prospects of biosurfactants produced from fungal species

The development of novel types of biogenic surface-active compounds is of greater interest for combating many diseases and infections. In this respect research and development of biosurfactant has gained immense importance. Substantially, biosurfactant is defined as a class of active amphiphilic chemical compounds that comprise hydrophobic and hydrophilic moieties on their surfaces. It is generally known that many kinds of microorganisms can be used to produce these surfactants or surface-active compounds. Hosting interesting features such as biodegradability, emulsifying/de-emulsifying capacity, low toxicity, and antimicrobial activities; these amphiphilic compounds in recent years have flourished as an ideal replacement for the chemically synthesized surfactant, and also have various commercial attractions. Both bacteria and fungi are the producers of these amphiphilic molecules; however, the pathogenicity of certain bacterial strains has caused a shift in interest toward fungi. Therefore, various fungi species have been reported for the production of biosurfactants amongst which Candida species have been the most studied strains. Biosurfactants uphold desired properties like antibacterial, antifungal, antiviral, antiadhesion, and anticancer activity which proves them an ideal candidate for the application in various fields like pharmaceutical, gene therapy, medical insertion safety, immunotherapy to fight against many chronic diseases, and so forth. Hence, this review article discusses the pharmaceutical prospects of biosurfactants produced from different fungal species, providing new directions toward the discovery and development of molecules with novel structures and diverse functions for advanced application in the medical field.

3D printed oral solid dosage form: Modified release and improved solubility

Oral solid dosage form is currently the most common used form of drug. 3D Printing, also known as additive manufacturing (AM), can quickly print customized and individualized oral solid dosage form on demand. Compared with the traditional tablet manufacturing process, 3D Printing has many advantages. By rationally selecting the formulation composition and cleverly designing the printing structure, 3D printing can improve the solubility of the drug and achieve precise modify of the drug release. 3D printed oral solid dosage form, however, still has problems such as limitations in formulation selection. And the selection process of the formulation lacks scientificity and standardization. Structural design of some 3D printing approaches is relatively scarce. This article reviews the formulation selection and structure design of 3D printed oral solid dosage form, providing more ideas for achieving modified drug release and solubility improvement of 3D printed oral solid dosage form through more scientific and extensive formulation selection and more sophisticated structural design.

Tadalafil-Loaded Self-Nanoemulsifying Chewable Tablets for Improved Bioavailability: Design, In Vitro, and In Vivo Testing

This research aimed to develop innovative self-nanoemulsifying chewable tablets (SNECT) to increase oral bioavailability of tadalafil (TDL), a nearly insoluble phosphodiesterase-5 inhibitor. Cinnamon essential oil, PEG 40 hydrogenated castor oil (Cremophor® RH 40), and polyethylene glycol 400 served as the oil, surfactant, and cosurfactant in the nanoemulsifying system, respectively. Primary liquid self-nanoemulsifying delivery systems (L-SNEDDS) were designed using phase diagrams and tested for dispersibility, droplet size, self-emulsifying capability, and thermodynamic stability. Adsorption on a carrier mix of silicon dioxide and microcrystalline cellulose was exploited to solidify the optimum L-SNEDDS formulation as self-nanoemulsifying granules (SNEG). Lack of crystalline TDL within the granules was verified by DSC and XRPD. SNEG were able to create a nanoemulsion instantaneously (165 nm), a little larger than the original nanoemulsion (159 nm). SNECT were fabricated by compressing SNEG with appropriate excipients. The obtained SNECT retained their quick dispersibility dissolving 84% of TDL within 30 min compared to only 18% dissolution from tablets of unprocessed TDL. A pharmacokinetic study in Sprague−Dawley rats showed a significant increase in Cmax (2.3-fold) and AUC0−24 h (5.33-fold) of SNECT relative to the unprocessed TDL-tablet (p < 0.05). The stability of TDL-SNECT was checked against dilutions with simulated GI fluids. In addition, accelerated stability tests were performed for three months at 40 ± 2 °C and 75% relative humidity. Results revealed the absence of obvious changes in size, PDI, or other tablet parameters before and after testing. In conclusion, current findings illustrated effectiveness of SNECT to enhance TDL dissolution and bioavailability in addition to facilitating dose administration.

Functional Excipients and Novel Drug Delivery Scenario in Self-nanoemulsifying Drug Delivery System: A Critical Note

Lipid-based formulations have emerged as prospective dosage forms for extracting the therapeutic effects of existing lipophilic compounds and novel chemical entities more efficiently. Compared to other excipients, lipids have the added benefit of enhancing the bioavailability of lipophilic and highly metabolizable drugs due to their unique physicochemical features and similarities to in vivo components. Furthermore, lipids can minimize the needed dose and even the toxicity of drugs with poor aqueous solubility when employed as the primary excipient. Hence, the aim of the present review is to highlight the functional behavior of lipid excipients used in SNEDD formulation along with the stability aspects of the formulation in vivo. Moreover, this review also covered the importance of SNEDDS in drug delivery, the therapeutic and manufacturing benefits of lipids as excipients, and the technological advances made so far to convert liquid to solid SNEDDS like melt granulation, adsorption on solid support, spray cooling, melt extrusion/ spheronization has also highlighted. The mechanistic understanding of SNEDD absorption in vivo is highly complex, which was discussed very critically in this review. An emphasis on their application and success on an industrial scale was presented, as supported by case studies and patent surveys.

Self-Emulsifying Drug Delivery Systems (SEDDS): Measuring Energy Dynamics to Determine Thermodynamic and Kinetic Stability

This research was designed to identify thermodynamically and kinetically stable lipidic self-emulsifying formulations through simple energy dynamics in addition to highlighting and clarifying common ambiguities in the literature in this regard. Proposing a model study, this research shows how most of the professed energetically stable systems are actually energetically unstable, subjected to indiscriminate and false characterization, leading to significant effects for their pharmaceutical applications. A self-emulsifying drug delivery system (SEDDS) was developed and then solidified (S-SEDDS) using a model drug finasteride. Physical nature of SEDDS was identified by measuring simple dynamics which showed that the developed dispersion was thermodynamically unstable. An in vivo study of albino rats showed a three-fold enhanced bioavailability of model drug with SEDDS as compared to the commercial tablets. The study concluded that measuring simple energy dynamics through inherent properties can distinguish between thermodynamically stable and unstable lipidic systems. It might lead to correct identification of a specific lipidic formulation and the application of appropriate characterization techniques accordingly. Future research strategies include improving their pharmaceutical applications and understanding the basic differences in their natures.

A QbD Approach to Design and to Optimize the Self-Emulsifying Resveratrol-Phospholipid Complex to Enhance Drug Bioavailability through Lymphatic Transport

Objectives: Despite having profound therapeutic value, the clinical application of resveratrol is restrained due to its <1% bioavailability, arising from the extensive fast-pass effect along with enterohepatic recirculation. This study aimed to develop a self-emulsifying formulation capable of increasing the bioavailability of resveratrol via lymphatic transport. Methods: The resveratrol−phospholipid complex (RPC) was formed by the solvent evaporation method and characterized by FTIR, DSC, and XRD analyses. The RPC-loaded self-emulsifying drug delivery system (SEDDS) was designed, developed, and optimized using the QbD approach with an emphasis on resveratrol transport through the intestinal lymphatic pathway. The in vivo pharmacokinetic study was investigated in male Wister Albino rats. Results: The FTIR, DSC, and XRD analyses confirmed the RPC formation. The obtained design space provided robustness of prediction within the 95% prediction interval to meet the CQA specifications. An optimal formulation (desirability value of 7.24) provided Grade-A self-emulsion and exhibited a 48-fold bioavailability enhancement compared to the pure resveratrol. The cycloheximide-induced chylomicron flow blocking approach demonstrated that 91.14% of the systemically available resveratrol was transported through the intestinal lymphatic route. Conclusions: This study suggests that an optimal self-emulsifying formulation can significantly increase the bioavailability of resveratrol through lymphatic transport to achieve the desired pharmacological effects.

Emerging trends and promises of nanoemulsions in therapeutics of infectious diseases

Infectious diseases are prevalent and have contributed to high morbidity rates by creating havoc like the COVID-19, 1918 influenza and Black Death (the plague) pandemics. Antimicrobial resistance, adverse effects, the emergence of co-infections and the high cost of antimicrobial therapies are major threats to the health of people worldwide while impacting overall healthcare and socioeconomic development. One of the most common ways to address this issue lies in improving existing antimicrobial drug-delivery systems. Nanoemulsions and their modified forms have been successfully employed for the delivery of antimicrobials to treat infectious diseases. In this article, the authors comprehensively reviewed how nanoemulsion-based formulation systems are shifting the paradigm for therapeutics and diagnosis of infectious diseases.

Compendium of naringenin: potential sources, analytical aspects, chemistry, nutraceutical potentials and pharmacological profile

Naringenin is flavorless, water insoluble active principle belonging to flavanone subclass. It exhibits a diverse pharmacological profile as well as divine nutraceutical values. Although several researchers have explored this phytoconstituent to evaluate its promising properties, still it has not gained recognition at therapeutic levels and more clinical investigations are still required. Also the neutraceutical potential has limited marketed formulations. This compilation includes the description of reported therapeutic potentials of naringenin in variety of pathological conditions alongwith the underlying mechanisms. Details of various analytical investigations carried on this molecule have been provided along with brief description of chemistry and structural activity relationship. In the end, various patents filed and clinical trial data has been provided. Naringenin has revealed promising pharmacological activities including cardiovascular diseases, neuroprotection, anti-diabetic, anticancer, antimicrobial, antiviral, antioxidant, anti-inflammatory and anti-platelet activity. It has been marketed in the form of nanoformulations, co-crystals, solid dispersions, tablets, capsules and inclusion complexes. It is also available in various herbal formulations as nutraceutical supplement. There are some pharmacokinetic issue with naringenin like poor absorption and low dissolution rate. Although these issues have been sorted out upto certain extent still further research to investigate the bioavailability of naringenin from herbal supplements and its clinical efficacy is essential.

Comparison of Consecutive Therapeutic Effects of Nanoemulsion and Emulsion Cyclosporin in Dry Eye Patients after Short-Term Treatment with Topical Fluorometholone

Purpose

To compare the consecutive therapeutic effects of 0.05% emulsion and nanoemulsion cyclosporine (CsA) in dry eye patients after short-term treatment with unpreserved 0.1% fluorometholone (FML).

Methods

A prospective, randomized, and double-blinded study of dry eye patients was conducted in a single center. Patients were assigned to the nanoemulsion CsA (group 1) and emulsion CsA (group 2) groups. To relieve discomfort, unpreserved 0.1% FML was used in both groups for 4 weeks and then changed to 0.05% CsA for the next 8 weeks. Symptom assessment in dry eye (SANDE) score, tear secretion, tear film breakup time (TBUT), corneal staining score (CSS), meibomian gland dysfunction (MGD) grade, and meibomian gland (MG) expression were evaluated at baseline and at 4 and 12 weeks after treatment.

Results

Twenty-four patients completed the treatment (9 and 15 patients in groups 1 and 2); in both the groups, SANDE score, TBUT, MGD grade, and MG expression were significantly improved after treatment with unpreserved 0.1% FML (each p < 0.005), and the therapeutic effects were enhanced with changes in nanoemulsion or emulsion CsA compared with baseline (each p < 0.001). TBUT and CSS after treatment in group 1 were significantly improved compared to those in group 2 (p=0.003 and 0.020, respectively).

Conclusion

Consecutive therapeutic effects of nanoemulsion or emulsion CsA after short-term treatment with unpreserved FML were excellent in patients with dry eyes. Topical nanoemulsion CsA showed better improvement in TBUT and OSS than CsA. This trial is registered with KCT0006070.

Plant-derived nanotherapeutic systems to counter the overgrowing threat of resistant microbes and biofilms

Since antiquity, the survival of human civilization has always been threatened by the microbial infections. An alarming surge in the resistant microbial strains against the conventional drugs is quite evident in the preceding years. Furthermore, failure of currently available regimens of antibiotics has been highlighted by the emerging threat of biofilms in the community and hospital settings. Biofilms are complex dynamic composites rich in extracellular polysaccharides and DNA, supporting plethora of symbiotic microbial life forms, that can grow on both living and non-living surfaces. These enforced structures are impervious to the drugs and lead to spread of recurrent and non-treatable infections. There is a strong realization among the scientists and healthcare providers to work out alternative strategies to combat the issue of drug resistance and biofilms. Plants are a traditional but rich source of effective antimicrobials with wider spectrum due to presence of multiple constituents in perfect synergy. Other than the biocompatibility and the safety profile, these phytochemicals have been repeatedly proven to overcome the non-responsiveness of resistant microbes and films via multiple pathways such as blocking the efflux pumps, better penetration across the cell membranes or biofilms, and anti-adhesive properties. However, the unfavorable physicochemical attributes and stability issues of these phytochemicals have hampered their commercialization. These issues of the phytochemicals can be solved by designing suitably constructed nanoscaled structures. Nanosized systems can not only improve the physicochemical features of the encapsulated payloads but can also enhance their pharmacokinetic and therapeutic profile. This review encompasses why and how various types of phytochemicals and their nanosized preparations counter the microbial resistance and the biofouling. We believe that phytochemical in tandem with nanotechnological innovations can be employed to defeat the microbial resistance and biofilms. This review will help in better understanding of the challenges associated with developing such platforms and their future prospects.

Application of Lipid-Based Nanocarriers for Antitubercular Drug Delivery: A Review

The antimicrobial drugs currently used for the management of tuberculosis (TB) exhibit poor bioavailability that necessitates prolonged treatment regimens and high dosing frequency to achieve optimal therapeutic outcomes. In addition, these agents cause severe adverse effects, as well as having detrimental interactions with other drugs used in the treatment of comorbid conditions such as HIV/AIDS. The challenges associated with the current TB regimens contribute to low levels of patient adherence and, consequently, the development of multidrug-resistant TB strains. This has led to the urgent need to develop newer drug delivery systems to improve the treatment of TB. Targeted drug delivery systems provide higher drug concentrations at the infection site, thus leading to reduced incidences of adverse effects. Lipid-based nanocarriers have proven to be effective in improving the solubility and bioavailability of antimicrobials whilst decreasing the incidence of adverse effects through targeted delivery. The potential application of lipid-based carriers such as liposomes, niosomes, solid lipid nanoparticles, nanostructured lipid carriers, nano and microemulsions, and self-emulsifying drug delivery systems for the treatment of TB is reviewed herein. The composition of the investigated lipid-based carriers, their characteristics, and their influence on bioavailability, toxicity, and sustained drug delivery are also discussed. Overall, lipid-based systems have shown great promise in anti-TB drug delivery applications. The summary of the reviewed data encourages future efforts to boost the translational development of lipid-based nanocarriers to improve TB therapy.

Lipid-Based Nanocarrier System for the Effective Delivery of Nutraceuticals

Nutraceuticals possess several health benefits and functions; however, most nutraceuticals are prone to degradation in the gastrointestinal environment and have poor bioavailability. Application of a novel carrier system is of increasing importance to overcome obstacles and provide efficient applicability. Lipid-based nanocarriers provide a large surface-to-mass ratio, enhanced intestinal absorption by solubilization in the intestinal milieu, intestinal lymphatic transport, and altering enterocyte-based transport. A critical overview of the current limitation, preparation, and application of lipid-based nanocarriers (liposomes and niosomes) and lipid nanoparticles (SLNs and NLCs) is discussed. Physical and gastrointestinal stability and bioavailability of nanoencapsulated nutraceuticals are considered as well.

Exploring new Horizons in overcoming P-glycoprotein-mediated multidrug-resistant breast cancer via nanoscale drug delivery platforms

The high probability (13%) of women developing breast cancer in their lifetimes in America is exacerbated by the emergence of multidrug resistance after exposure to first-line chemotherapeutic agents. Permeation glycoprotein (P-gp)-mediated drug efflux is widely recognized as the major driver of this resistance. Initial in vitro and in vivo investigations of the co-delivery of chemotherapeutic agents and P-gp inhibitors have yielded satisfactory results; however, these results have not translated to clinical settings. The systemic delivery of multiple agents causes adverse effects and drug-drug interactions, and diminishes patient compliance. Nanocarrier-based site-specific delivery has recently gained substantial attention among researchers for its promise in circumventing the pitfalls associated with conventional therapy. In this review article, we focus on nanocarrier-based co-delivery approaches encompassing a wide range of P-gp inhibitors along with chemotherapeutic agents. We discuss the contributions of active targeting and stimuli responsive systems in imparting site-specific cytotoxicity and reducing both the dose and adverse effects.

Quality-by-Design-Based Development of a Voxelotor Self-Nanoemulsifying Drug-Delivery System with Improved Biopharmaceutical Attributes

Low aqueous solubility and poor oral bioavailability are limiting factors in the oral delivery of voxelotor, an antisickling agent. To overcome these limitations, a voxelotor self-nanoemulsifying drug delivery system was developed. Various oils, surfactants, and cosurfactants were screened for their solubilization potential for the drug. The area of nanoemulsification was identified using a ternary phase diagram. An experimental mixture design and a desirability function were applied to select SNEDDSs that contain a maximum amount of lipids and a minimum amount of surfactant, and that possess optimal emulsification properties (i.e., droplet sizes, polydispersity index (PDI), emulsification time, and transmittance percentage). The optimized SNEDDS formulation was evaluated for the self-emulsifying time (32 s), droplet size (35 nm), and zeta potential (−8 mV). In vitro dissolution studies indicated a 3.1-fold improvement in drug solubility from the optimized SNEDDS over pure drug powder. After 60 min of in vitro lipolysis, 88% of the voxelotor loaded in the SNEDDS remained in the aqueous phase. Cytotoxicity evaluation, using Caco-2 cells, indicated the safety of the formulation at 0.9 mg/mL. The transport of the voxelotor SNEDDS across Caco-2 monolayers was significantly enhanced compared to that of the free drug. Compared to the drug suspension, the developed SNEDDS enhanced the oral bioavailability (1.7-fold) of voxelotor in rats. The results suggest that further development of SNEDDSs for the oral delivery of voxelotor is needed.

Supersaturated LFCS type III self-emulsifying delivery systems of sorafenib tosylate with improved biopharmaceutical performance: QbD-enabled development and evaluation

The current studies investigate the application of quality by design-enabled type III self-emulsifying delivery system (Type III-SEDDS) of sorafenib tosylate (SFN) in improving its biopharmaceutical attributes. Initially, lipidic and emulsifying excipients were selected by carrying out solubility and phase titration experiments. After screening studies using Taguchi OA design, Type III-SEDDS were further optimised using D-optimal mixture design. The prepared formulations were assessed for globule size, zeta potential and percent of drug release. Following graphical optimisation, the optimum formulation was earmarked and further supersaturated to form saturated Type III-SEDDS (Sat-Type III-SEDDS) using a combination of HPMC and PVP to improve the stability of the formulation for a prolonged period. In vitro drug release of Type III-SEDDS study indicated approximately 8-fold improvement in dissolution rate over the pure powder drug. Cell uptake studies demonstrated higher uptake of dye-loaded Type III-SEDDS formulations in Caco-2 cells vis-à-vis plain dye. Cytotoxicity assay on Hep G2 cells revealed significant reduction in cell growth with Type III- and Sat-Type III-SEDDS vis-à-vis the pure drug. Furthermore, in situ permeation studies carried out using Wistar rats exhibited nearly 8.3- to 10.2-fold augmentation in permeation and absorption parameters of the drug from the Type III- and Sat-Type III-SEDDS, respectively, vis-à-vis the pure drug. Pharmacokinetic studies indicated nearly 3.98- and 3.62-fold improvement in AUC_0-72, and 8.01- and 5.42-fold in C_max, along with 0.25-fold decrease in T_max of the drug from Type III- and Sat-Type III-SEDDS, respectively, in comparison with the SFN suspension. Furthermore, high degree of level A linear correlation was established between fractions of drug dissolved (in vitro) and of drug absorbed (in vivo) at the corresponding time points for Sat-Type III-SEDDS and pure drug, whereas the Type III-SEDDS exhibited a nonlinear relationship. Stability studies indicated the robustness of Sat-Type III-SEDDS, when stored at 25 °C for 3 months. Overall, the manuscript documents the successful systematic development of SFN-loaded Sat-Type III-SEDDS with distinctly improved biopharmaceutical performance. Graphical abstract.

Development and optimization of drug-loaded nanoemulsion system by phase inversion temperature (PIT) method using Box-Behnken design

OBJECTIVE

The objective of the present investigation was to develop a stable and optimized drug-loaded nanoemulsion system using the phase inversion temperature (PIT) method.

SIGNIFICANCE

The PIT method has been widely used for the development of food-grade nanoemulsion systems. For the first time, a simple and cost-effective, PIT method was used for the development of a stable drug-loaded nanoemulsion system.

METHODS

Box-Behnken experimental design was used for the development of an optimized drug-loaded nanoemulsion system by the PIT method. The independent variables were optimized for responses by using the desirability function. The hydrophobic drug, benidipine was used as a modal drug. Optimized oil phase (blend of long-chain triglycerides oil, medium-chain triglycerides oil and essential oil) was used for the development of oil in water (O/W) nanoemulsion system.

RESULTS

Optimum nanoemulsion formulation was stable, transparent and contained 50% of oil to surfactant percentage with a droplet size of 96.57 ± 1.61 nm. The optimum formulation also showed higher in-vitro drug diffusion from dialysis membrane as compared to the marketed formulation. Nanoemulsion droplets were observed as spherical in the transmission electron microscopy (TEM) images. Box-Behnken statistical analysis revealed that all the independent variables had a significant impact on characteristics of nanoemulsion and the predicated value of independent variables was found to be valid.

CONCLUSION

It was concluded that the PIT method produces a stable and efficient drug-loaded nanoemulsion system. Further, the optimized oil phase can be used as an alternative to costly, commercial medium-chain triglycerides (MCT) oils, for the development of a stable nanoemulsion system.

3D Printing of Dapagliflozin Containing Self-Nanoemulsifying Tablets: Formulation Design and In Vitro Characterization

The 3D printing techniques have been explored extensively in recent years for pharmaceutical manufacturing and drug delivery applications. The current investigation aims to explore 3D printing for the design and development of a nanomedicine-based oral solid dosage form of a poorly water-soluble drug. A self-nanoemulsifying tablet formulation of dapagliflozin propanediol monohydrate was developed utilizing the semisolid pressure-assisted microsyringe (PAM) extrusion-based 3D printing technique. The developed formulation system consists of two major components (liquid and solid phase), which include oils (caproyl 90, octanoic acid) and co-surfactant (PEG 400) as liquid phase while surfactant (poloxamer 188) and solid matrix (PEG 6000) as solid-phase excipients that ultimately self-nanoemulsify as a drug encapsulated nanoemulsion system on contact with aqueous phase/gastrointestinal fluid. The droplet size distribution of the generated nanoemulsion from a self-nanoemulsifying 3D printed tablet was observed to be 104.7 ± 3.36 nm with polydispersity index 0.063 ± 0.024. The FT-IR analysis of the printed tablet revealed that no drug-excipients interactions were observed. The DSC and X-RD analysis of the printed tablet revealed that the loaded drug is molecularly dispersed in the crystal lattice of the tablet solid matrix and remains solubilized in the liquid phase of the printed tablet. SEM image of the drug-loaded self-nanoemulsifying tablets revealed that dapagliflozin propanediol monohydrate was completely encapsulated in the solid matrix of the printed tablet, which was further confirmed by SEM-EDS analysis. The in vitro dissolution profile of dapagliflozin-loaded self-nanoemulsifying tablet revealed an immediate-release drug profile for all three sizes (8 mm, 10 mm, and 12 mm) tablets, exhibiting >75.0% drug release within 20 min. Thus, this study has emphasized the capability of the PAM-based 3D printing technique to print a self-nanoemulsifying tablet dosage form with an immediate-release drug profile for poorly water-soluble drug.

Wound Healing Activity of Opuntia ficus-indica Fixed Oil Formulated in a Self-Nanoemulsifying Formulation

INTRODUCTION

Delayed wound healing represents a common health hazard. Traditional herbal products have been often utilized to promote wound contraction. The current study aimed at assessing the wound healing activity of Opuntia ficus-indica seed oil (OFI) and its self-nanoemulsifying drug delivery system (OFI-SNEDDS) formula in a rat model of full-thickness skin excision.

METHODS

Based on droplet size, an optimized OFI-SNEDDS formula was prepared and used for subsequent evaluation. Wound healing activity of OFI and OFI-SNEDDS was studied in vivo.

RESULTS

The optimized OFI-SNEDDS formula droplet size was 50.02 nm. The formula exhibited superior healing activities as compared to regular OFI seed oil-treated rats at day 14 of wounding. This effect was further confirmed by histopathological examinations of H&E and Masson's Trichrome-stained skin sections. Moreover, OFI-SNEDDS showed the highest antioxidant and anti-inflammatory activities as compared to OFI seed oil-treated animals. Both OFI and OFI-SNEDDS significantly enhanced hydroxyproline skin content and upregulated Col1A1 mRNA expression, accompanied by enhanced expression of transforming factor-beta (TGF-β). Further, OFI-SNEDDS improved angiogenesis as evidenced by increased expression of vascular endothelial growth factor (VEGF).

CONCLUSION

OFI possesses wound healing properties that are enhanced by self-emulsification of the oil into nano-droplets. The observed activity can be attributed, at least partly, to its anti-inflammatory, pro-collagen and angiogenic properties.

Suppression effect of thyme and carvacrol nano-emulsions on Aspergillus fumigatus isolated from patients in the intensive care unit of Assiut University Hospital, Egypt

Background and Aim: Aspergillus fumigatus is a zoonotic fungus that causes several diseases in humans ranging from allergic reaction to fatal disseminated invasive infection, especially in immunocompromised patients. This study aimed to investigate the incidence of invasive A. fumigatus in patients admitted to the intensive care unit (ICU) of Assiut University Hospital, highlight the factors associated with their infection, and determine the antifungal effect of thyme nano-emulsion (TNE) and carvacrol nano-emulsion (CNE) on isolated A. fumigatus strains. Materials and Methods: Mycological culture method and scanning electron microscopy (SEM) were used in the identification of A. fumigatus in 630 blood samples collected from 210 patients. TNE and CNE at five concentrations (1%, 2%, 4%, 6%, and 8%) and average sizes of 90.3 and 75.6 nm, respectively, were characterized by transmission electron microscopy. Their effect on A. fumigatus isolate growth was evaluated by the well-diffusion method and SEM, which was used for the detection of the degenerative effect of A. fumigatus ultrastructure. Results: A. fumigatus was detected in 54 of 210 (25.7%) patients in the ICU. Advanced age and chronic diseases were considered important risk factors for invasive aspergillosis, especially in patients with more than 1 clinical disease. TNE and CNE showed an inhibitory effect on A. fumigatus isolates, which significantly increased with high concentrations. The respective values for TNE at concentrations of 6% and 8% were 6±0.41 mm and 15±0.67 mm. CNE completely inhibited A. fumigatus growth at concentrations of 4%, 6%, and 8%, while mean inhibition zones of 22±0.68 mm and 30±0.32 mm appeared at concentrations of 1% and 2%. SEM demonstrated degenerative changes in A. fumigatus structure. Conclusion: TNE and CNE can be used in bioactive treatments against A. fumigatus, and additional studies are required to determine the safe and effective doses and best method for application in human and veterinary medicine.

Biocompatible Solvents and Ionic Liquid-Based Surfactants as Sustainable Components to Formulate Environmentally Friendly Organized Systems

In this review, we deal with the formation and application of biocompatible water-in-oil microemulsions commonly known as reverse micelles (RMs). These RMs are extremely important to facilitate the dissolution of hydrophilic and hydrophobic compounds for biocompatibility in applications in drug delivery, food science, and nanomedicine. The combination of two wisely chosen types of compounds such as biocompatible non-polar solvents and ionic liquids (ILs) with amphiphilic character (surface-active ionic liquids, SAILs) can be used to generate organized systems that perfectly align with the Green Chemistry concepts. Thus, we describe the current state of SAILs (protic and aprotic) to prepare RMs using non-polar but safe solvents such as esters derived from fatty acids, among others. Moreover, the use of the biocompatible solvents as the external phase in RMs and microemulsions/nanoemulsions with the other commonly used biocompatible surfactants is detailed showing the diversity of preparations and important applications. As shown by multiple examples, the properties of the RMs can be modified by changes in the type of surfactant and/or external solvents but a key fact to note is that all these modifications generate novel systems with dissimilar properties. These interesting properties cannot be anticipated or extrapolated, and deep analysis is always required. Finally, the works presented provide valuable information about the use of biocompatible RMs, making them a green and promising alternative toward efficient and sustainable chemistry.

Formulation and Applications of Lipid-Based Nanovehicles: Spotlight on Self-emulsifying Systems

The drug delivery investigation field is continuously widened and adapted to overcome many factors such as poor drug solubility, absorption, rapid metabolism, the variability of drug plasma levels, cellular efflux and many others. Due to resemblance to body constituents and their biocompatibility, lipids offer a promising scheme for poorly water-soluble and lipophilic drugs. Various nanoparticles including vesicular systems, lipid particulate systems, and emulsion systems provide some unique benefits as pharmaceutical carriers in drug and biomolecules delivery systems. Nowadays synthesis is directed toward simple, costless techniques, therefore, self-emulsifying systems have gained superiority over the other carriers. Self nano-emulsifying systems composed of oil, surfactant, and co-surfactant emulsified upon contact with an aqueous medium, has been widely exploited. This review attempts to provide a comprehensive interpretation of different types of lipid-based carriers emphasizing on the self-nanoemulsifying system, why it is gaining interest, formulation, composition, and applications.

Effects of different physicochemical characteristics and supersaturation principle of solidified SNEDDS and surface-modified microspheres on the bioavailability of carvedilol

In this study, a solidified self-nanoemulsifying drug delivery system (solidified SNEDDS) and surface-modified microspheres were developed for enhancing the oral bioavailability of carvedilol. Based on the aqueous solubility test, liquid SNEDDS was composed of Peceol™ (oil), Tween® 80 (surfactant), and Labrasol® (co-surfactant) at a weight ratio of 25/50/25, generating the smallest nanoemulsion droplet size. Then, carvedilol was added to liquid SNEDDS and spray-dried with Aerosil® to fabricate the solidified SNEDDS. Surface-modified microspheres were manufactured using copovidone (polymer) and Tween® 80 (surfactant) according to aqueous solubility test results. The proper ratio of copovidone and Tween® 80 was determined based on the solubility and dissolution test. Both prepared formulations and carvedilol powder were compared using four different criteria: physicochemical characteristics, solubility, dissolution, and oral bioavailability. For solidified SNEDDS, carvedilol was encapsulated in liquid SNEDDS and absorbed to the Aerosil® surface, leading to the conversion from a crystalline to an amorphous state. However, the drug maintained its crystal form in the surface-modified microspheres. Round and even-sized particles were attached to the rough surfaces of drug, suggesting that hydrophilic carriers adhered to the hydrophobic drug. All formulations significantly improved drug solubility, dissolution, plasma concentrations, C_max, and AUC compared to carvedilol powder. The parameters were ranked in the following order: solidified SNEDDS > surface-modified microspheres > carvedilol powder. As a result, different solubility-increasing mechanisms provided differences in performance. For carvedilol, the formation of a nano-emulsion in solidified SNEDDS resulted in an efficient supersaturated state, leading to improved solubility (~6.1 fold), dissolution (~1.8 fold), and oral bioavailability (~1.4 fold) that was superior to the hydrophilic microenvironment in surface-modified microspheres.