An Inclusive Overview of Advanced Thermal and Nonthermal Extraction Techniques for Bioactive Compounds in Food and Food-related Matrices

Phytochemical Screening, Antibacterial Activity, and Toxicity of Calathea lutea Leaf Extracts

In Colombia, there is a long tradition of using bijao (Calathea lutea) leaves to package or wrap various foods. However, scientific studies on C. lutea are limited, and research to evaluate its toxicity and/or antibacterial activity has not yet been conducted. The objective of this research, therefore, was to evaluate the content of phytochemical compounds, levels of toxicity, and antibacterial activity of the extracts, fractions, and essential oil derived from C. lutea leaves. The plant material was subjected to extraction by maceration, Soxhlet extraction, and steam distillation, and fractions of hexane, dichloromethane, ethyl acetate, and a residual ethanol-water fraction were obtained. Preliminary phytochemical screening was performed using standard procedures with staining reagents. Estimation of the toxicity was carried out using the Caenorhabditis elegans biological model. Antibacterial activity was determined by broth microdilution against Staphylococcus aureus and Escherichia coli. The results showed that the characteristic metabolites were flavonoids, triterpenes, and tannins. At the concentrations tested, the extracts, fractions, and essential oil showed minimal toxicity levels. In terms of antibacterial activity, E. coli showed no susceptibility; meanwhile, the dichloromethane fraction had high antibacterial activity against S. aureus, with a growth inhibition rate of 81.2%. The results suggested that the of dichloromethane fraction of C. lutea has antibacterial activity against S. aureus, suggesting its potential as a possible candidate as a natural antibacterial agent in the food industry. This alternative could offer a safer and more sustainable solution compared to the conventional synthetic preservatives.

Recent Advancements in Production and Extraction Methods of Phycobiliprotein C-phycocyanin by Arthrospira (Spirulina) platensis: A Mini Review

Arthrospira platensis has been utilized as a food source since ancient times due to its rich nutrient profile. In recent years, its popularity as a dietary supplement has soared, especially due to the presence of a water-soluble phycobiliprotein, C-phycocyanin C (C-PC), which is abundant and notable for its fluorescent properties. C-PC contains the chromophore phycocyanobilin B (PCB-B), a tetrapyrrole molecule, that is why it plays a dual role as a food colorant and as nutraceutical. However, comprehensive studies have mostly evaluated C-PC's broader health-promoting properties, particularly its antioxidative and anti-inflammatory effects, which are linked to its ability to contrast oxidative stress and related pathological conditions. That is why this review explores recent advancements in optimizing culture conditions to enhance C-PC and PCB-B production, with a particular emphasis on novel extraction and purification techniques that increase yield and bioactivity. This focus on efficient production methods is crucial for expanding the commercial and therapeutic applications of C-PC, contributing to its growing relevance in the food and pharmaceutical industries.

Effects of thermal processing on natural antioxidants in fruits and vegetables

Research on the content of polyphenolic compounds in fruits and vegetables, the extraction of bioactive compounds, and the study of their impact on the human body has received growing attention in recent years. This is due to the great interest in bioactive compounds and their health benefits, resulting in increased market demand for natural foods. Bioactive compounds from plants are generally categorized as natural antioxidants with health benefits such as anti-inflammatory, antioxidant, anti-diabetic, anti-carcinogenic, etc. Thermal processing has been used in the food sector for a long history. Implementing different thermal processing methods could be essential in retaining the quality of the natural antioxidant compounds in plant-based foods. A comprehensive review is presented on the effects of thermal blanching (i.e., hot water, steam, superheated steam impingement, ohmic and microwave blanching), pasteurization, and sterilization and drying technologies on natural antioxidants in fruits and vegetables.

Procedures to evaluate potential of plants as natural food preservatives: Phytochemical characterization, novel extraction technology, and safety evaluation-A comprehensive review

There is increasing demand for natural food preservative in food manufacturing industry as it is the key to meet consumers' preferences toward healthier food choice. Plant is listed among the most important resources of bioactive components to be utilized as the green and natural food preservatives. There are more than 10,000 kinds of bioactive components in plants that possess antioxidant and antimicrobial properties. Artemisia with potential antimicrobial and antioxidant attributes, as well as functional and medicinal properties, is one of the most important plant species. The manuscript presents a comprehensive review of the potential of the Artemisia species as natural food preservatives. The current challenges and ways forward in using Artemisia EOs and extracts as food preservatives are also discussed. This topic is timely and important considering the natural preservatives used to replace chemical ingredients, sustaining quality, healthy properties, and shelf life of food products as well as efficient and novel extraction techniques.

Innovative Strategies for Upcycling Agricultural Residues and Their Various Pharmaceutical Applications

This review investigates innovative strategies for upcycling agricultural residues into valuable pharmaceutical compounds. The improper disposal of agricultural residues contributes to significant environmental issues, including increased greenhouse gas emissions and ecosystem degradation. Upcycling offers a sustainable solution, transforming these residues into high-value bioproducts (antioxidants, antitumor agents, antidiabetic compounds, anti-inflammatory agents, and antiviral drugs). Nanotechnology and microbial biotechnology have a crucial role in enhancing bioavailability and targeted delivery of bioactive compounds. Advanced techniques like enzymatic hydrolysis, green solvents, microwave processing, pyrolysis, ultrasonic processing, acid and alkaline hydrolysis, ozonolysis, and organosolv processes are explored for their effectiveness in breaking down agricultural waste and extracting valuable compounds. Despite the promising potential, challenges such as variability in residue composition, scalability, and high costs persist. The review emphasizes the need for future research on cost-effective extraction techniques and robust regulatory frameworks to ensure the safety, efficacy, and quality of bioproducts. The upcycling of agricultural residues represents a viable path towards sustainable waste management and production of pharmaceutical compounds, contributing to environmental conservation and public health improvements. This review provides an analysis of the current literature and identifies knowledge gaps, offering recommendations for future studies to optimize the use of agricultural residues in the drug industry.

Optimizing catechin extraction from green tea waste: Comparative analysis of hot water, ultrasound-assisted, and ethanol methods for enhanced antioxidant recovery

This study aimed to develop an efficient method for the extraction of bioactive compounds from green tea waste (GTW) toward its potential application in the food industry. GTW, which is generated during the harvesting and processing of green tea products, accounts for a global annual loss of nearly 1 million tonnes. Notably, this waste is rich in polyphenolic compounds, particularly catechins, which are renowned for their significant health benefits. We assessed the optimization of catechin extraction from GTW employing hot water extraction (HWE), ultrasound-assisted extraction (UAE), and ethanol extraction (EthE) techniques at different sample-to-solvent ratios (1:100, 1:50, and 1:20 w/v). The extraction temperature was set at 80°C for both HWE and UAE; however, for EthE, the temperature was slightly lower at 70°C, adhering to the boiling point of ethanol. High-performance liquid chromatography was used to determine the extraction efficiency by quantifying various catechins (i.e., catechin, epicatechin [EC], epicatechin gallate [ECG], epigallocatechin [EGC], and epigallocatechin gallate [EGCG]). In terms of the concentration for individual catechins, EC was found to be the highest concentration detected, ranging from 30.58 ± 1.17 to 37.95 ± 0.84 mg/L in all extraction techniques and ratios of solvents, followed by EGCG (9.71 ± 1.40-20.99 ± 1.11 mg/L), EGC + C (7.95 ± 0.66-12.58 ± 0.56 mg/L), and ECG (1.85 ± 0.71-6.05 ± 0.06 mg/L). The findings of DPPH (2,2-diphenyl-1-picryl-hydrazyl) free radical assay illustrated that HWE demonstrated the highest extraction efficiency at all ratios, ranging from 61.41 ± 1.00 to 70.36 ± 1.47 mg/L. The 1:50 ratio exhibited the highest extraction yield (25.98% ± 0.75%) compared to UAE (24.16% ± 0.95%) and EthE (22.59% ± 0.26%). Moreover, this method of extraction (i.e., HWE) produced the highest total catechins and %DPPH reduction. Consequently, HWE was the most efficient method for extracting catechins from GTW, underscoring its potential for valorizing waste within the food manufacturing industry.

A review of the fungal polysaccharides as natural biopolymers: Current applications and future perspective

As a unique natural resource, fungi are a sustainable source of lipids, polysaccharides, vitamins, proteins, and other nutrients. As a result, they have beneficial medicinal and nutritional properties. Polysaccharides are among the most significant bioactive components found in fungi. Increasing research has revealed that fungal polysaccharides (FPS) contain a variety of bioactivities, including antitumor, antioxidant, immunomodulatory, anti-inflammatory, hepatoprotective, cardioprotective, and anti-aging properties. However, the exact knowledge about FPS and their applications related to their future possibilities must be thoroughly examined to enhance a better understanding of this sustainable biopolymer source. Therefore, FPS' biological applications and their role in the food and feed industry, agriculture, and cosmetics applications were all discussed in this work. In addition, this review highlighted the mode of action of FPS on human diseases by regulating gut microbiota and discussed the mechanism of FPS as antioxidants in the living cell. The structure-activity connections of FPS were also highlighted and explored. Moreover, future perspectives were listed to pave the way for future studies of FPS applications. Hence, this study can be a scientific foundation for future FPS research and industrial applications.

Recent progress in Porphyra haitanensis polysaccharides: Extraction, purification, structural insights, and their impact on gastrointestinal health and oxidative stress management

Porphyra haitanensis, a red seaweed species, represents a bountiful and sustainable marine resource. P. haitanensis polysaccharide (PHP), has garnered considerable attention for its numerous health benefits. However, the comprehensive utilization of PHP on an industrial scale has been limited by the lack of comprehensive information. In this review, we endeavor to discuss and summarize recent advancements in PHP extraction, purification, and characterization. We emphasize the multifaceted mechanisms through which PHP promotes gastrointestinal health. Furthermore, we present a summary of compelling evidence supporting PHP's protective role against oxidative stress. This includes its demonstrated potent antioxidant properties, its ability to neutralize free radicals, and its capacity to enhance the activity of antioxidant enzymes. The information presented here also lays the theoretical groundwork for future research into the structural and functional aspects of PHP, as well as its potential applications in functional foods.

Advances in the novel and green-assisted techniques for extraction of bioactive compounds from millets: A comprehensive review

Millets are rich in nutritional and bioactive compounds, including polyphenols and flavonoids, and have the potential to combat malnutrition and various diseases. However, extracting these bioactive compounds can be challenging, as conventional methods are energy-intensive and can lead to thermal degradation. Green-assisted techniques have emerged as promising methods for sustainable and efficient extraction. This review explores recent trends in employing green-assisted techniques for extracting bioactive compounds from millets, and potential applications in the food and pharmaceutical industries. The objective is to evaluate and comprehend the parameters involved in different extraction methods, including energy efficiency, extraction yield, and the preservation of compound quality. The potential synergies achieved by integrating multiple extraction methods, and optimizing extraction efficiency for millet applications are also discussed. Among several, Ultrasound and Microwave-assisted extraction stand out for their rapidity, although there is a need for further research in the context of minor millets. Enzyme-assisted extraction, with its low energy input and ability to handle complex matrices, holds significant potential. Pulsed electric field-assisted extraction, despite being a non-thermal approach, requires further optimization for millet-specific applications, are few highlights. The review emphasizes the importance of considering specific compound characteristics, extraction efficiency, purity requirements, and operational costs when selecting an ideal technique. Ongoing research aims to optimize novel extraction processes for millets and their byproducts, offering promising applications in the development of millet-based nutraceutical food products. Therefore, the current study benefits researchers and industries to advance extraction research and develop efficient, sustainable, and scalable techniques to extract bioactive compounds from millets.

Structure of Polysaccharide from Dendrobium nobile Lindl. and Its Mode of Action on TLR4 to Exert Immunomodulatory Effects

Dendrobium nobile Lindl. polysaccharide (DNP1) showed good anti-inflammatory activity in our previous study. In this study, the structural characterization of DNP1 and its mode of action on TLR4 were investigated. Structural characterization suggested that DNP1 was a linear glucomannan composed of (1 → 4)-β-Manp and (1 → 4)-β-Glcp residues, and the acetyl group was linked to the C-2 of Manp. The possible repeating structural units of DNP1 were [→4)-2-OAc-β-Manp-(1→]3 →4)-β-Glcp-(1→. Surface plasmon resonance (SPR) binding test results showed that DNP1 did not bind directly to TLR4. The TLR4 and MD2 receptor blocking tests confirmed that DNP1 needs MD2 and TLR4 to participate in its anti-inflammatory effect. The binding energy of DNP1 to TLR4-MD2 was -7.9 kcal/mol, indicating that DNP1 could bind to the TLR4-MD2 complex stably. Therefore, it is concluded that DNP1 may play an immunomodulatory role by binding to the TLR4-MD2 complex and inhibiting the TLR4-MD2-mediated signaling pathway.

Effects of ultra-high pressure assisted extraction on the structure, antioxidant and hypolipidemic activities of Porphyra haitanensis polysaccharides

Porphyra haitanensis polysaccharides (PHPs) have potential antioxidant and hypolipidemic activities, but still need improvement. Therefore, ultra-high pressure (UHP) assisted extraction was applied to modify the structure, antioxidant, and hypolipidemic activities of PHPs. UHP assisted extraction increased the total sugar, uronic acid, and 3,6-anhydro-ʟ-galactose contents of PHP, which increased by 15.85 %-16.12 %, 18.95 %-24.32 %, 20.54 %-23.66 % with 500-600 MPa UHP, respectively. Meanwhile, UHP modified PHP became more rough and porous than native PHP. Besides, UHP assisted extracted PHP showed better in vitro antioxidant and hypolipidemic abilities. Especially, 500-600 MPa UHP increased 72.43 %-86.42 % 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging capacities, 12.32 %-12.82 % pancreatic lipase inhibitory ability, and 14.93 %-15.23 % glycocholate binding abilities of PHP (p < 0.05). Moreover, UHP assisted extracted PHP greatly decreased the lipid droplet and triglyceride contents of 3T3-L1 adipocytes (p < 0.05). Our findings can provide the theoretical basis for the high value utilization of Porphyra haitanensis and its polysaccharides with UHP modification.

Sustainable utilization of apple pomace and its emerging potential for development of functional foods

Apple pomace, a byproduct of apple processing industry, possesses nutritional components which are of great interests for health aspects. Apple pomace is a good source of dietary fiber, minerals, carbohydrates, phenolic, and antioxidant compounds. These bioactive compounds can be extracted by different extraction techniques which have been comprehensively described in this review article. Furthermore, the incorporation of apple pomace as functional ingredients in different food products like bakery items, extrusion-based snacks, meat, dairy, and confectionary products to improve the commercial value and health benefits has been discussed briefly. This review article can be a helpful tool for industrialists, innovative researchers, and waste management authorities to manage the apple waste in an appropriate and sustainable way.

Pulsed Electric Field (PEF) and High-Power Ultrasound (HPU) in the Hurdle Concept for the Preservation of Antioxidant Bioactive Compounds of Strawberry Juice-A Chemometric Evaluation-Part I

This work investigated the influence of pulsed electric field (PEF) and high-power ultrasound (HPU) combined with hurdle technology to preserve the bioactive compounds (BACs) content and antioxidant activity in stored strawberry juices. PEF was performed at 30 kV cm-1, 100 Hz during 1.5, 3, and 4.5 min, while HPU was performed at 25% amplitude and 50% pulse during 2.5, 5.0, and 7.5 min. Total phenols and hydroxycinnamic acids were the most stable BACs during the hurdle treatment without influence of the duration of both treatments, while flavonols and condensed tannins showed a significant stability dependence with respect to the duration of both treatments. Total phenols were also stable during storage, in contrast to the individual groups of BACs studied. A chemometric approach was used to optimize the parameters of the hurdle treatments with respect to the highest level of BACs and the antioxidant activity of the treated juices. In general, shorter treatment times in the hurdle approach resulted in better stability of BACs and antioxidant activity. The hurdle technology investigated in this study has the strong potential to be an excellent concept for optimizing the operating parameters of PEF and HPU technologies in the preservation of functional foods.

Valorization of Soybean Residue (Okara) by Supercritical Carbon Dioxide Extraction: Compositional, Physicochemical, and Functional Properties of Oil and Defatted Powder

In the context of food waste valorization, the purpose of this study is to demonstrate the complete valorization of soybean residue (okara) through supercritical carbon dioxide extraction (SCE). Okara oil (OKO) was separated from full-fat powder (FFP) using SCE with and without ethanol (EtOH) as a cosolvent. The kinetics of extraction, chemical composition, and physicochemical, functional, and health-promoting properties of OKO and defatted powder (DFP) were determined. The process yielded 18.5% oil after 450 min. The soluble dietary fiber and protein of the DFP increased significantly; its water and oil absorption capacities increased despite the decrease in swelling capacity corresponding to particle size reduction. The OKO was rich in linoleic and oleic acids, with a ratio of ω6-to-ω3 fatty acids = 9.53, and EtOH increased its phenolic content (0.45 mg GAE/g), aglycone content (239.6 μg/g), and antioxidant capacity (0.195 mg TE/g). The DFP paste showed gel-like consistency and shear-thinning flow behavior, whereas the OKO showed characteristic transition of the product and affected lubrication at contact zones. Both fractions showed potential as food ingredients based on their nutritional and functional properties, as well as the capability of modifying the microstructure of a model food system.

Subcritical and Supercritical Fluids to Valorize Industrial Fruit and Vegetable Waste

The valorization of industrial fruit and vegetable waste has gained significant attention due to the environmental concerns and economic opportunities associated with its effective utilization. This review article comprehensively discusses the application of subcritical and supercritical fluid technologies in the valorization process, highlighting the potential benefits of these advanced extraction techniques for the recovery of bioactive compounds and unconventional oils from waste materials. Novel pressurized fluid extraction techniques offer significant advantages over conventional methods, enabling effective and sustainable processes that contribute to greener production in the global manufacturing sector. Recovered bio-extract compounds can be used to uplift the nutritional profile of other food products and determine their application in the food, pharmaceutical, and nutraceutical industries. Valorization processes also play an important role in coping with the increasing demand for bioactive compounds and natural substitutes. Moreover, the integration of spent material in biorefinery and biorefining processes is also explored in terms of energy generation, such as biofuels or electricity, thus showcasing the potential for a circular economy approach in the management of waste streams. An economic evaluation is presented, detailing the cost analysis and potential barriers in the implementation of these valorization strategies. The article emphasizes the importance of fostering collaboration between academia, industry, and policymakers to enable the widespread adoption of these promising technologies. This, in turn, will contribute to a more sustainable and circular economy, maximizing the potential of fruit and vegetable waste as a source of valuable products.

Antioxidant and Anti-Cytotoxicity Effect of Phenolic Extracts from Psidium guajava Linn. Leaves by Novel Assisted Extraction Techniques

Phytochemicals (PCs) are gaining popularity due to their antioxidant effects and potential protection against infection, cardiovascular disease, and cellular metabolic activity. These PCs must be retained as much as possible during extraction. This research focused on the extraction of PC from Psidium guajava Linn. leaves due to higher antioxidant potential. Solvent extraction (SE), microwave-assisted extraction (MAE), and ultrasound-assisted extraction (UAE) using distilled water (DW) or 60% (v/v) ethanol/water (ET) were used for the extraction of PC. ET shows higher total phenolic (TPC) and total flavonoid content (TFC) as well as higher antioxidant activity than DW. Phytochemical screening demonstrated that all of the screening showed positive results in all extraction methods, except glycoside. There were no significant differences (p > 0.05) in TPC and TFC during MAE/ET, SE/ET, and UAE/ET. Antioxidant analysis shows that MAE and SE resulted in high (p < 0.05) DPPH and FRAP values for ET and DW, respectively. MAE/ET showed the highest inhibitory activity (IC₅₀ = 16.67 µg/mL). HPLC and TLC analysis reveal the fingerprint of morin, which might function as an anticancer agent with other bioactives. Increasing the extract content increased the inhibitory activity of SW480 cells via MTT assay. In conclusion, MAE/ET is the most efficient among the extraction techniques in terms of anti-cytotoxicity effects.

The Genus Capsicum: A Review of Bioactive Properties of Its Polyphenolic and Capsaicinoid Composition

Chili is one of the world's most widely used horticultural products. Many dishes around the world are prepared using this fruit. The chili belongs to the genus Capsicum and is part of the Solanaceae family. This fruit has essential biomolecules such as carbohydrates, dietary fiber, proteins, and lipids. In addition, chili has other compounds that may exert some biological activity (bioactivities). Recently, many studies have demonstrated the biological activity of phenolic compounds, carotenoids, and capsaicinoids in different varieties of chili. Among all these bioactive compounds, polyphenols are one of the most studied. The main bioactivities attributed to polyphenols are antioxidant, antimicrobial, antihyperglycemic, anti-inflammatory, and antihypertensive. This review describes the data from in vivo and in vitro bioactivities attributed to polyphenols and capsaicinoids of the different chili products. Such data help formulate functional foods or food ingredients.

Degradation, isomerization and stabilization of three dicaffeoylquinic acids under ultrasonic treatment at different pH

Dicaffeoylquinic acids (diCQAs) are found in a variety of edible and medicinal plants with various biological activities. An important issue is the low stability of diCQAs during extraction and food processing, resulting in the degradation and transformation. This work used 3,5-diCQA as a representative to study the influence of different parameters in ultrasonic treatment on the stability of diCQAs, including solvent, temperature, treatment time, ultrasonic power, duty cycle, and probe immersion depth. The generation of free radicals and its influence were investigated during the treatment. The stability of three diCQAs (3,5-diCQA, 4,5-diCQA and 3,4-diCQA) under the certain ultrasonic condition at different pH conditions was evaluated and found to decrease with the increase of pH, further weakened by ultrasonic treatment. Ultrasound was found to accelerate the degradation and isomerization of diCQAs. Different diCQAs showed different pattern of degradation and isomerization. The stability of diCQAs could be improved by adding epigallocatechin gallate and vitamin C.

Potential impact of ultrasound, pulsed electric field, high-pressure processing and microfludization against thermal treatments preservation regarding sugarcane juice (Saccharum officinarum)

Sugarcane juice (Saccharum officinarum) is a proven nutritious beverage with high levels of antioxidants, polyphenols, and other beneficial nutrients. It has recently gained consumer interest due to its high nutritional profile and alkaline nature. Still, high polyphenolic and sugar content start the fermentation in juice, resulting in dark coloration. Lately, some novel techniques have been introduced to extend shelf life and improve the nutritional value of sugarcane juice. The introduction of such processing technologies is beneficial over conventional processes and essential for producing chemical-free, high-quality, fresh juices. The synergistic impact of these novel technologies is also advantageous for preserving sugarcane juice. In literature, novel thermal, non-thermal and hurdle technologies have been executed to preserve sugarcane juice. These technologies include high hydrostatic pressure (HHP), ultrasound (US), pulsed electric field (PEF), ultraviolet irradiation (UV), ohmic heating (OH), microwave (MW), microfludization and ozone treatment. This review manifests the impact of novel thermal, non-thermal, and synergistic technologies on sugarcane juice processing and preservation characteristics. Non-thermal techniques have been successfully proved effective and showed better results than novel thermal treatments. Because they reduced microbial load and retained nutritional content, while thermal treatments degraded nutrients and flavor of sugarcane juice. Among non-thermal treatments, HHP is the most efficient technique for the preservation of sugarcane juice while OH is preferable in thermal techniques due to less nutritional loss.

Effect of drying methods on physico-chemical and bioactive compounds of mandarin (citrus reticulata) peel

Mandarin peel, an agro waste has an immense potential for bio utilization. The present study highlights the effect of drying on the physicochemical and biochemical properties of dried mandarin peel. Microwave drying and forced air drying accomplished at three different power levels (180, 360 and 540 W) and temperatures (30, 50 and 70 °C), respectively, while freeze drying was carried out at shelf temperature of –35 °C. The results revealed highest recovery of bioactive compounds from microwave drying at 540 W viz total phenolic (43.61 mg GAE/g), flavonoid (8.08 mg QE/g), tannin (8.73 mg GAE/g), saponin (159.91 mg EE/g−1), as well as, gallic acid antioxidant activity (3.58 mg GAEAC/g) and ferric reducing antioxidant power (50.61 mg TE/g−1). Furthermore, results from HPLC and UV–vis spectroscopy revealed presence of major polyphenols in dried peel. Microwave drying can be concluded as an industrial method for the bio utilization of mandarin peel.

Ultrasound, Acetic Acid, and Peracetic Acid as Alternatives Sanitizers to Chlorine Compounds for Fresh-Cut Kale Decontamination

Chlorinated compounds are usually applied in vegetable sanitization, but there are concerns about their application. Thus, this study aimed to evaluate ultrasound (50 kHz), acetic acid (1000; 2000 mg/L), and peracetic acid (20 mg/L) and their combination as alternative treatments to 200 mg/L sodium dichloroisocyanurate. The overall microbial, physicochemical, and nutritional quality of kale stored at 7 °C were assessed. The impact on Salmonella enterica Typhimurium was verified by plate-counting and scanning electron microscopy. Ultrasound combined with peracetic acid exhibited higher reductions in aerobic mesophiles, molds and yeasts, and coliforms at 35 °C (2.6; 2.4; 2.6 log CFU/g, respectively). Microbial counts remained stable during storage. The highest reduction in Salmonella occurred with the combination of ultrasound and acetic acid at 1000 mg/L and acetic acid at 2000 mg/L (2.8; 3.8 log CFU/g, respectively). No synergistic effect was observed with the combination of treatments. The cellular morphology of the pathogen altered after combinations of ultrasound and acetic acid at 2000 mg/L and peracetic acid. No changes in titratable total acidity, mass loss, vitamin C, or total phenolic compounds occurred. Alternative treatments presented equal to or greater efficacies than chlorinated compounds, so they could potentially be used for the decontamination of kale.

An appealing review of industrial and nutraceutical applications of pistachio waste

Pistachio (Pistacia vera L.) is consumed in almost every part of the world enclosed in shells that are thrown out in baskets. Similarly, hulls separated from pistachio are discarded as waste in food processing industries. These waste materials contain functional constituents having immense industrial and nutraceutical applications. This review article summarizes the scientific investigations regarding the functional constituents and bioactive compounds in pistachio shells (PSs) and pistachio hulls (PHs). It also highlights the nutraceutical potential exhibited by functionally active compounds as well as their potential applications in various industries including nutraceutical, medicinal, and feed industries together with biosynthetic development of useful products and wastewater treatment. Pistachio waste (PW) comprising PS and PH is a rich source of various bioactive compounds. PS is full of lignin, cellulose, and hemicellulose. PH is an excellent source of carbohydrates (80.64 ± 0.98%) (including glucose, galactose, rhamnose, arabinose, xylose, mannose, galacturonic acid) as well as ash (6.32 ± 0.26%) and proteins (1.80 ± 0.28%) with small amounts of fats (0.04 ± 0.005%). Owing to its composition, PW can be beneficial in many nutraceuticals, including antioxidation, cytoprotection, anti-obesity, anti-diabetic, anti-melanogenesis, neuroprotection, anti-cancer, anti-mutagenesis, anti-inflammation, and anti-microbial. The waste materials have vast applications in the food industry, such as bio-preservation of oils and meat products, prevention of enzymatic browning in fruits, vegetables, and mushrooms, development of functional cereal and dairy products, production of food enzymes, emulsions, and manufacturing of biodegradable films for food packaging. The use of these waste products to develop and design novel functional foods with improved quality is important for both food industries and food sustainability.

Pulsed electric field assisted extraction of natural food pigments and colorings from plant matrices

•

Pulsed electric field (PEF) technology enables the extraction of food pigments at lower temperatures.

•

PEF process intensification may reduce the extraction yield depending on the plant matrix.

•

Coupling PEF with other emerging technologies is a smart strategy to extract natural pigments.

•

The application of PEF technology in natural food pigment extraction still requires further studies.

Coloring compounds are widely applied to manufacturing foods and beverages. The worldwide food market is replacing artificial colorants with natural alternatives, given the increased consumer demand for natural products. However, these substitutes are still an issue due to their high production cost and low chemical and physical stability. Furthermore, natural pigments are highly sensitive to processes applied in conventional extraction techniques, such as thermal, mechanical, and chemical stresses. In this regard, pulsed electric field (PEF) technology has emerged as a promising non-thermal alternative for recovering and producing natural colorings from food matrices. Its action mechanism on cell structures through the electroporation effect is a smart alternative to overcoming the challenging issues associated with producing natural colorants. In this scenario, this review provides an overview of the PEF assisted extraction of natural pigments and colorants, such as anthocyanins (red-blue-purple), betalains (red), carotenoids (yellow-orange-red), and chlorophylls (green) from plant sources. Moreover, the potential and limitations of this emerging technology to integrate the extraction process of natural colorants were discussed.

Ultrasonic Extraction Process of Polysaccharides from Dendrobium nobile Lindl.: Optimization, Physicochemical Properties and Anti-Inflammatory Activity

To optimize the ultrasonic extraction process of polysaccharides from Dendrobium nobile Lindl. (DNP), the extraction method was conducted through a single-factor test and the response-surface methodology (RSM). With the optimal extraction process (liquid–solid ratio of 40 mL/g, ultrasonic time of 30 min, and ultrasonic power of 400 W), the maximum extraction yield was 5.16 ± 0.41%. DNP1 and DNP2 were then fractionated via DEAE-QFF and Sephacryl S-300 HR chromatography. The molecular weight (Mw) of DNP1 was identified as 67.72 kDa, composed of Man (75.86 ± 0.05%) and Glc (24.14 ± 0.05%), and the Mw of DNP2 was 37.45 kDa, composed of Man (72.32 ± 0.03%) and Glc (27.68 ± 0.03%). Anti-inflammatory assays results showed that as DNPs were 200 μg/mL, and the contents of NO, TNF-α, IL-1β, IL-6 and IL-10 in LPS-induced RAW 264.7 cells were about 13.39% and 13.39%, 43.88% and 43.51%, 17.80% and 15.37%, 13.84% and 20.66%, and 938.85% and 907.77% of those in control group, respectively. It was indicated that DNP1 and DNP2 inhibited the inflammatory response of RAW 264.7 cells induced by LPS via suppressing the level of NO and pro-inflammatory cytokines (TNF-α, IL-1β and IL-6) and promoting the secretion of anti-inflammatory cytokine (IL-10). Therefore, DNP1 and DNP2 have potential applications in the treatment of inflammatory injury.

Application of Pulsed Electric Fields to Pilot and Industrial Scale Virgin Olive Oil Extraction: Impact on Organoleptic and Functional Quality

The quality of virgin olive oil (VOO) is largely determined by the technology used in the industrial process of extracting the oil. Technological innovations within this field aim to strike a proper balance between oil yield and the optimal chemical composition of VOO. The application of pulsed electric fields (PEF) that cause the electroporation of the plant cell membranes favors a more efficient breakage of the olive fruit tissue, which in turn could facilitate the extraction of the oil and some of its key minor components. Pilot-scale and industrial extraction tests have been conducted to assess the effect of PEF technology on the oil extraction yield and on the organoleptic and functional quality of VOO. The best results were obtained by combining the PEF treatment (2 kV/cm) with short malaxation times and a low processing temperature. Under these conditions, PEF technology could decisively improve the oil yield by up to 25% under optimal conditions and enhance the incorporation of phenolic and volatile compounds into the oils. The PEF treatment neither affected the physicochemical parameters used to determine the commercial categories of olive oils, nor the tocopherol content. Similarly, the sensory evaluation of the PEF-extracted oils by means of a panel test did not detect the appearance of any defect or off-flavor. In addition, the intensity of positive attributes (fruity, bitter and pungent) was generally higher in PEF oils than in control oils.

Novel Approaches in the Valorization of Agricultural Wastes and Their Applications

Worldwide, a huge amount of agricultural food wastes and byproducts containing valuable bioactive compounds are generated, especially throughout the entire supply chain. Minimizing food wastes and byproducts is the first option to avoid environmental problems, and to help the economy and the society. Although many countries implement policies to reduce food wastes and byproducts, and different management methods are available to utilize agricultural food wastes, they are still produced annually. Nanotechnological and biotechnological approaches are recently used as novel and green applications to valorize agricultural food wastes and improve their stability and applicability. In this Review, these approaches are covered in detail with given examples. Another valorization way of consumable food waste is using it for functional food production. This Review focuses on specific examples of functional foods with food waste as an ingredient. In addition, the problems and limitations of waste management and valorization methods are investigated, considering future perspectives.

Processing of Carob Kernels to Syrup by Ultrasound-Assisted Extraction

Carob syrup is one of the most important carob products, which can have applications in pastry and confectionery, as a fruit preservative, but also in the pharmaceutical field because of the antimicrobial activity due to its polyphenol content. Carob syrup is traditionally made through a very time-consuming process, involving solid–liquid extraction in boiling water and concentration at a high temperature (>100 °C), which potentially causes the degradation of the active compounds (i.e., procyanidins or flavonol glycosides). Therefore, in this work, an alternative and less drastic method based on ultrasound technology was proposed to produce carob syrup. Processing conditions (i.e., time, temperature, and liquid–solid ratio) influencing the extraction of total soluble solids (TSS) and total phenolic compounds (TPC) were optimized using a central composite design coupled to response surface methodology. Reliable mathematical models allowed us to predict the highest TSS (24 ± 2 °Brix) and TPC (1.7 ± 0.5 mg/mL) values that could be obtained at 15 min, 35 °C, and 2 mL/g. Finally, a different HPLC-DAD phenolic pattern was determined between syrups produced by traditional and ultrasound methods; epicatechin, 4-hydroxycoumaric acid, and ferulic acid were more concentrated in the former, while procyanidin B2, myricitrin, and quercitrin were prevalent in the latter one.

Ifs and buts of non-thermal processing technologies for plant-based drinks' bioactive compounds

Vegetables and fruits contain a variety of bioactive nutrients and non-nutrients that are associated with health promotion. Consumers currently demand foods with high contents of healthy compounds, as well as preserved natural taste and flavour, minimally processed without using artificial additives. Processing alternatives to be applied on plant-based foodstuffs to obtain beverages are mainly referred to as classical thermal treatments that although are effective treatments to ensure safety and extended shelf-life, also cause undesirable changes in the sensory profiles and phytochemical properties of beverages, thus affecting the overall quality and acceptance by consumers. As a result of these limitations, new non-thermal technologies have been developed for plant-based foods/beverages to enhance the overall quality of these products regarding microbiological safety, sensory traits, and content of bioactive nutrients and non-nutrients during the shelf-life of the product, thus allowing to obtain enhanced health-promoting beverages. Accordingly, the present article attempts to review critically the principal benefits and downsides of the main non-thermal processing alternatives (High hydrostatic pressure, pulsed electric fields, ultraviolet light, and ultrasound) to set up sound comparisons with conventional thermal treatments, providing a vision about their practical application that allows identifying the best choice for the sectoral industry in non-alcoholic fruit and vegetable-based beverages.

Combination of Ultrasound and Heat in the Extraction of Chia Seed (Salvia hispanica L.) Mucilage: Impact on Yield and Technological Properties

The effect of ultrasound in combination of heat on the extraction yield and technological properties of chia seed mucilage was investigated. Chia seeds were mixed with distilled water at a seed-to-water ratio of 1:30. The dispersion was adjusted to pH 9 and treated either with heat extraction by water bath or with heat/ultrasound extraction by probe-type sonication at 50 °C and 80 °C for 30 and 60 min. The yield and technological properties of mucilage samples were evaluated. The heat/ultrasound extraction gave a greater yield of mucilage (6.92–10.52%) as compared to the heat extraction (1.03–1.86%). Images obtained from Scanning Electron Microscope (SEM) have shown that during heat/ultrasound extraction, the amount of mucilage fibers on the surface of chia seed decreased with the increased extraction time. Thus, the yield of mucilage prepared with heat/ultrasound extraction for 60 min was significantly higher than that of mucilage extracted for 30 min. However, the difference between the seed samples treated with heat/ultrasound extraction at different temperatures was not apparent. The mucilage prepared with heat/ultrasound extraction at 50 °C for 60 min had the best technological properties. The amount of protein in the heat/ultrasound extracted mucilage diversified its technological property. Moreover, the mixture of mucilage and whey protein isolate had better miscibility. This study confirms the great potential of application of ultrasound in combination with heat in the extraction of chia seed mucilage.

Application of Ultrasound-Assisted Extraction and Non-Thermal Plasma for Fucus virsoides and Cystoseira barbata Polysaccharides Pre-Treatment and Extraction

Brown algae Fucus virsoides and Cystoseira barbata are an abundant source of sulfated polysaccharide fucoidan, which has shown a wide range of biological activities. These activities are significantly dependent on the fucoidan chemical composition, which is closely linked with the applied extraction technique and process parameters. In order to overcome the drawbacks of lengthy conventional extraction (CE), advanced extraction techniques, such as ultrasound-assisted extraction (UAE) and non-thermal plasma (NTP), were applied. Furthermore, this study also investigated the efficiency of different solvents as well as UAE and NTP as 5 min pre-treatments prior to CE as a more effective course of cell wall breakage and, consequently, a higher polysaccharide yield (%PS). Apart from %PS, the effect of this procedure on the chemical composition and antioxidant capacity of the extracted polysaccharides was also monitored. When comparing the extraction solvent, the application of 0.1 M H2SO4, instead of H2O, resulted in a three-fold higher %PS, a higher sulfate group, and a lower fucose content. Application of CE resulted in higher %PS, uronic acids, and fucose content as well as oxygen radical absorbance capacity (ORAC) and DPPH values, while the average molecular weight (Mw), sulfate group, and glucose content were lower during CE when compared to 30 min of UAE and NTP treatment. Application of UAE and NTP as 5 min pre-treatments decreased fucose content, while %PS and sulfate content were similar to values obtained when using CE.

Environmentally Friendly Techniques for the Recovery of Polyphenols from Food By-Products and Their Impact on Polyphenol Oxidase: A Critical Review

Even though food by-products have many negative financial and environmental impacts, they contain a considerable quantity of precious bioactive compounds such as polyphenols. The recovery of these compounds from food wastes could diminish their adverse effects in different aspects. For doing this, various nonthermal and conventional methods are used. Since conventional extraction methods may cause plenty of problems, due to their heat production and extreme need for energy and solvent, many novel technologies such as microwave, ultrasound, cold plasma, pulsed electric field, pressurized liquid, and ohmic heating technology have been regarded as alternatives assisting the extraction process. This paper highlights the competence of mild technologies in the recovery of polyphenols from food by-products, the effect of these technologies on polyphenol oxidase, and the application of the recovered polyphenols in the food industry.

A Comprehensive Optimization of Ultrasound-Assisted Extraction for Lycopene Recovery from Tomato Waste and Encapsulation by Spray Drying

This study aimed to extract bioactive compounds from tomato waste through ultrasound-assisted extraction (UAE), using ethanol as solvent. Process optimization was carried out by a central composite design of 33 runs for response surface modelling, simultaneously analyzing the effect of temperature (T), time (t), volume (V), liquid-to-solid ratio (L/S), amplitude (A), the pulser duration (on), and their interaction. The best conditions found by the desirability method (T = 65 °C, t = 20 min, L/S = 72 mL/g, A = 65%, on = 33 s, V = 90 mL) were experimentally verified, leading to the production of an extract with interesting properties (total carotenoids of 1408 ±14 µglycopene equivalents/g, lycopene yield of 1536 ± 53 µg/g, 36.1 ± 0.9 µgtrolox equivalents/g as antiradical power). Due to the instability of lycopene, the extract encapsulation by spray drying was undertaken using inulin and maltodextrins as coating agents. The evaluation of wall material composition provided high product recovery (73%), a high content of encapsulated compared to superficial lycopene (15.3 ± 2.9 and 0.30 ± 0.02 µg/g), and a product with good water solubility. The novelty of this work concerned the simultaneous study of the effect and interdependences of the UAE parameters, and the use of inulin to enhance the properties of microparticles.

Enrichment of Sunflower Oil with Ultrasound-Assisted Extracted Bioactive Compounds from Crithmum maritimum L

Crithmum maritimum L., or sea fennel, is an edible halophyte plant, rich in phenolic compounds with antioxidant and antimicrobial activities, that naturally grows in Mediterranean coasts. This study aims to incorporate bioactive compounds extracted from lyophilized Crithmum maritimum to sunflower oil assisted by ultrasounds (UAE), to improve its biological value and oxidative stability. UAE conditions were optimized as a function of time (5–20 min) and lyophilized plant concentration (5–20% m/v). The experiments were dictated by a central composite rotatable matrix. Oxidation products were not influenced by UAE conditions. Acidity, chlorophyll, and carotenoid contents were affected by both factors, while total phenols, flavonoids, and antioxidant activity (FRAP method) only increased with plant concentration. Response surfaces were fitted to these experimental results. Flavonoids were highly related with oil antioxidant activity. No sensory defects were detected in supplemented oil (12.5% m/v plant/5 min UAE). The oxidative stability of this oil was evaluated at 60 °C/12 days. Chlorophylls, phenols, radical scavenging (DPPH), and antioxidant activities decreased over time but were always higher than the values in non-supplemented oil (8.6 and 7-fold with FRAP and DPPH, respectively). C. maritimum presented high amounts of bioactive compounds with antioxidant activity, adequate for sunflower oil supplementation by UAE.

Sustainable Extractions for Maximizing Content of Antioxidant Phytochemicals from Black and Red Currants

Sustainable extraction techniques (ultrasound-assisted extraction (UAE), microwave-assisted extraction (MAE), and pressurized-liquid extraction (PLE)) were applied and compared with conventional solvent extraction to evaluate their efficiency in maximizing the bioactive compound content and antioxidant activity of black and red currants. The influence of ethanol concentrations (30%, 50%, 70%) were studied in all extraction methods, while different temperatures (30, 50, 70 °C/80, 100, 120 °C) were evaluated in UAE and PLE, respectively. Generally, higher total phenolics were determined in black currant extracts (1.93–3.41 g GAE/100 g) than in red currant extracts (1.27–2.63 g GAE/100 g). The results showed that MAE was the most efficient for the extraction of bioactives from black currants, with 3.41 g GAE/100 g and 0.7934 g CE/100 g, while PLE provided the highest TP and TF for black currant samples (2.63 g GAE/100 g and 0.77 g CE/100 g). Extracts obtained by MAE (10 min, 600 W, 30% ethanol) and PLE (50% ethanol, 10 min, 120 °C) had the highest antioxidant activity, as determined by various in vitro assays (DPPH, FRAP, and ABTS). In conclusion, sustainable extraction techniques can be considered an efficient tool to maximize the content of bioactive antioxidants from black and red currants.

By-Products Revalorization with Non-Thermal Treatments to Enhance Phytochemical Compounds of Fruit and Vegetables Derived Products: A Review

The aim of this review is to provide comprehensive information about non-thermal technologies applied in fruit and vegetables (F&V) by-products to enhance their phytochemicals and to obtain pectin. Moreover, the potential use of such compounds for food supplementation will also be of particular interest as a relevant and sustainable strategy to increase functional properties. The thermal instability of bioactive compounds, which induces a reduction of the content, has led to research and development during recent decades of non-thermal innovative technologies to preserve such nutraceuticals. Therefore, ultrasounds, light stresses, enzyme assisted treatment, fermentation, electro-technologies and high pressure, among others, have been developed and improved. Scientific evidence of F&V by-products application in food, pharmacologic and cosmetic products, and packaging materials were also found. Among food applications, it could be mentioned as enriched minimally processed fruits, beverages and purees fortification, healthier and "clean label" bakery and confectionary products, intelligent food packaging, and edible coatings. Future investigations should be focused on the optimization of 'green' non-thermal and sustainable-technologies on the F&V by-products' key compounds for the full-utilization of raw material in the food industry.

Progress in the Valorization of Fruit and Vegetable Wastes: Active Packaging, Biocomposites, By-Products, and Innovative Technologies Used for Bioactive Compound Extraction

According to the Food Wastage Footprint and Climate Change Report, about 15% of all fruits and 25% of all vegetables are wasted at the base of the food production chain. The significant losses and wastes in the fresh and processing industries is becoming a serious environmental issue, mainly due to the microbial degradation impacts. There has been a recent surge in research and innovation related to food, packaging, and pharmaceutical applications to address these problems. The underutilized wastes (seed, skin, rind, and pomace) potentially present good sources of valuable bioactive compounds, including functional nutrients, amylopectin, phytochemicals, vitamins, enzymes, dietary fibers, and oils. Fruit and vegetable wastes (FVW) are rich in nutrients and extra nutritional compounds that contribute to the development of animal feed, bioactive ingredients, and ethanol production. In the development of active packaging films, pectin and other biopolymers are commonly used. In addition, the most recent research studies dealing with FVW have enhanced the physical, mechanical, antioxidant, and antimicrobial properties of packaging and biocomposite systems. Innovative technologies that can be used for sensitive bioactive compound extraction and fortification will be crucial in valorizing FVW completely; thus, this article aims to report the progress made in terms of the valorization of FVW and to emphasize the applications of FVW in active packaging and biocomposites, their by-products, and the innovative technologies (both thermal and non-thermal) that can be used for bioactive compounds extraction.

Maximizing Contents of Phytochemicals Obtained from Dried Sour Cherries by Ultrasound-Assisted Extraction

Sour cherries were first dried by vacuum drying and then used as material for obtaining extracts rich in bioactive compounds by ultrasound-assisted extraction (UAE). The first step was to apply a factorial design for the preliminary experiments to determine the most influential UAE factors, and thus the three studied parameters were chosen as the most suitable for the design of the main experiment (temperature, liquid–solid ratio and ethanol concentration). In this part, the contents of total phenols and the total content of monomeric anthocyanins were taken for responses. For the further optimization of UAE, experimental design (face-centered) was applied, and the yield, total phenolics, flavonoid content and content of monomeric anthocyanins and antioxidant activity (DPPH, ABTS and FRAP assays) were analyzed. Temperature (40–80 °C), ethanol concentration (40–80%, w/w) and liquid–solid ratio (10–30 mL/g) were investigated as independent variables. The obtained experimental results were fitted to a second-order polynomial model and analysis of variance was used to determine the fit of the model and the optimal conditions for investigated responses. High quality extracts with high concentrations of polyphenols and anthocyanins were also obtained, which could be used as food additives.

Optimum Parameters for Extracting Three Kinds of Carotenoids from Pepper Leaves by Response Surface Methodology

To determine the optimum parameters for extracting three carotenoids including zeaxanthin, lutein epoxide, and violaxanthin from pepper leaves by response surface methodology (RSM), a solvent of acetone and ethyl acetate (1:2) was used to extract carotenoids with four independent factors: ultrasound time (20–60 min); ratio of sample to solvent (1:12–1:4); saponification time (10–50 min); and concentration of saponification solution (KOH–methanol) (10–30%). A second-order polynomial model produced a satisfactory fitting of the experimental data with regard to zeaxanthin (R2 = 75.95%, p < 0.0197), lutein epoxide (R2 = 90.24%, p < 0.0001), and violaxanthin (R2 = 73.84%, p < 0.0809) content. The optimum joint extraction conditions of zeaxanthin, lutein epoxide, and violaxanthin were 40 min, 1:8, 32 min, and 20%, respectively. The optimal predicted contents for zeaxanthin (0.823022 µg/g DW), lutein epoxide (4.03684 µg/g dry; DW—dry weight), and violaxanthin (16.1972 µg/g DW) in extraction had little difference with the actual experimental values obtained under the optimum extraction conditions for each response: zeaxanthin (0.8118 µg/g DW), lutein epoxide (3.9497 µg/g DW), and violaxanthin (16.1590 µg/g DW), which provides a theoretical basis and method for cultivating new varieties at low temperatures and weak light resistance.

A Critical Review on Pulsed Electric Field: A Novel Technology for the Extraction of Phytoconstituents

Different parts of a plant (seeds, fruits, flower, leaves, stem, and roots) contain numerous biologically active compounds called “phytoconstituents” that consist of phenolics, minerals, amino acids, and vitamins. The conventional techniques applied to extract these phytoconstituents have several drawbacks including poor performance, low yields, more solvent use, long processing time, and thermally degrading by-products. In contrast, modern and advanced extraction nonthermal technologies such as pulsed electric field (PEF) assist in easier and efficient identification, characterization, and analysis of bioactive ingredients. Other advantages of PEF include cost-efficacy, less time, and solvent consumption with improved yields. This review covers the applications of PEF to obtain bioactive components, essential oils, proteins, pectin, and other important materials from various parts of the plant. Numerous studies compiled in the current evaluation concluded PEF as the best solution to extract phytoconstituents used in the food and pharmaceutical industries. PEF-assisted extraction leads to a higher yield, utilizes less solvents and energy, and it saves a lot of time compared to traditional extraction methods. PEF extraction design should be safe and efficient enough to prevent the degradation of phytoconstituents and oils.