Three-dimensional structure of myosin subfragment-1 from electron microscopy of sectioned crystals

Myosin assembly of smooth muscle: from ribbons and side polarity to a row polar helical model

After decades of debate over the structure of smooth muscle myosin filaments, it is still unclear whether they are helical, as in all other muscle types, or square in shape. In both cases bipolar building units are proposed, but the deduced cross-bridge arrangements are fundamentally different. The opposite polarity of the adjusting longitudinal rows is proposed for the helical structure, while in the case of square filaments, or myosin ribbons, only their two faces are appositively polarized. Analysis of our unpublished archival data on light meromyosin (LMM) paracrystals and myosin rod assemblies as well as the filaments themselves indicated that the rods were assembled with a 6°-7° tilt angle from the rods' longitudinal axis, in contrast to the lack of tilt in LMM, both exhibiting a 14.3 nm myosin periodicity. Optical diffraction analysis of EM images of the rod assemblies and those of intact myosin confirmed their helical architecture characterized by 28 nm residue translations, 172 nm repeats and 516 nm pitch. A detailed helical model of these filaments was elucidated with bipolar tetramer building units made of two polar trimers. The filaments elongate at their two ends in a head-to-head manner, enabling targeted cross-bridge polarity of the adjacent rows, in the form of a unique Boerdijk-Coxeter type helix, similar to that of collagen or desmin fibers, with the covalent links replaced by a head-to-head clasp.

A proteomic study of the pulmonary injury induced by microcystin-LR in mice

MCLR has been shown to act as potent hepatotoxin, and recent studies showed that MCs can accumulate in lung tissue and exert adverse effects. However, the exact mechanism still remain unclear. The present study mainly focuses on the impairments of respiratory system after MCLR exposure in mice. After intratracheal instillation with MCLR (0, 10 and 25 μg/kg bw), histological change was examined in MCLR exposure groups. Results indicated that exposure of MCLR led to serious histopathology alteration and apoptosis in lung of mice. To further our understanding of the toxic effects of MCLR on the lung, we employed a proteomic method to search the mechanisms behind MCLR-induced pulmonary injury. In total, 38 proteins were identified to be significantly altered after MCLR exposure. These proteins involved in inflammatory response, apoptosis, cytoskeleton, and energetic metabolism, suggesting MCLR exerts complex toxic effects contributing to pulmonary injury. Furthermore, MCLR also induced pulmonary inflammation, as manifested by up-regulating the protein levels of interleukin-1β (IL-1β) and p65 subunit. Our results indicated that MCLR exerts lung injury mainly by generating inflammation and apoptosis.

The effects of kisspeptin-10 on serum metabolism and myocardium in rats

Kisspeptin is a peptide encoded by the Kiss 1 gene and is also called metastin. Previous studies have generally focused on several functions of this peptide, including metastasis, puberty, vasoconstriction and reproduction. However, few studies have focused on the cardiac functions of kisspeptin. In the present study, cardiac histomorphology was observed via TEM (transmission electron microscope) and HE and Masson staining to observe instinctive changes. Serum metabolites levels were also measured and analyzed using GC/TOF-MS after injection with kisspeptin-10. A gene chip was employed to screen the potential genes and pathways in the myocardium at the transcriptional leve, while RT-PCR and Western Blot were conducted to verify the relevant mRNA and protein expression, respectively. Histopathological findings demonstrated that there were many irregular wavy contractions through HE staining and increased fibrosis around the heart cells through Masson staining after treatment with kisspeptin-10. Additionally, the main changes in ultrastructure, including changes in mitochondrial and broken mitochondrial cristae, could be observed with TEM after treatment with kisspeptin-10. The PCA scores plot of the serum metabolites was in the apparent partition after injection of kisspeptin-10. Twenty-six obviously changed metabolites were detected and classified as amino acids, carbohydrate metabolites, organic acids and other metabolites. Furthermore, gene chip analysis showed 1112 differentially expressed genes after treatment with kisspeptin-10, including 330 up-regulated genes and 782 down-regulated genes. These genes were enriched in several signaling pathways related to heart diseases. The RT-PCR result for ITGB8, ITGA4, ITGB7, MYL7, HIF1-α and BNP corresponded with the gene chip assay. Moreover, the upregulated genes ITGB8, ITGA4 and BNP also displayed consistent protein levels in Western Blot results. In summary, these findings suggest that kisspeptin-10 could alter the morphology and structure of myocardial cells, serum metabolite levels, and expression of genes and proteins in heart tissues. Our work determined the profound effects of kisspeptin-10 on the heart, which could further lead to the development of therapeutics related to kisspeptin-10, including antagonists and analogs.

Electron Microscopy and Image Processing: Essential Tools for Structural Analysis of Macromolecules

Macromolecular electron microscopy typically depicts the structures of macromolecular complexes ranging from ∼200 kDa to hundreds of MDa. The amount of specimen required, a few micrograms, is typically 100 to 1000 times less than needed for X-ray crystallography or nuclear magnetic resonance spectroscopy. Micrographs of frozen-hydrated (cryogenic) specimens portray native structures, but the original images are noisy. Computational averaging reduces noise, and three-dimensional reconstructions are calculated by combining different views of free-standing particles ("single-particle analysis"). Electron crystallography is used to characterize two-dimensional arrays of membrane proteins and very small three-dimensional crystals. Under favorable circumstances, near-atomic resolutions are achieved. For structures at somewhat lower resolution, pseudo-atomic models are obtained by fitting high-resolution components into the density. Time-resolved experiments describe dynamic processes. Electron tomography allows reconstruction of pleiomorphic complexes and subcellular structures and modeling of macromolecules in their cellular context. Significant information is also obtained from metal-coated and dehydrated specimens.

Poorly understood aspects of striated muscle contraction

Muscle contraction results from cyclic interactions between the contractile proteins myosin and actin, driven by the turnover of adenosine triphosphate (ATP). Despite intense studies, several molecular events in the contraction process are poorly understood, including the relationship between force-generation and phosphate-release in the ATP-turnover. Different aspects of the force-generating transition are reflected in the changes in tension development by muscle cells, myofibrils and single molecules upon changes in temperature, altered phosphate concentration, or length perturbations. It has been notoriously difficult to explain all these events within a given theoretical framework and to unequivocally correlate observed events with the atomic structures of the myosin motor. Other incompletely understood issues include the role of the two heads of myosin II and structural changes in the actin filaments as well as the importance of the three-dimensional order. We here review these issues in relation to controversies regarding basic physiological properties of striated muscle. We also briefly consider actomyosin mutation effects in cardiac and skeletal muscle function and the possibility to treat these defects by drugs.

Recent advances in morphological cell image analysis

This paper summarizes the recent advances in image processing methods for morphological cell analysis. The topic of morphological analysis has received much attention with the increasing demands in both bioinformatics and biomedical applications. Among many factors that affect the diagnosis of a disease, morphological cell analysis and statistics have made great contributions to results and effects for a doctor. Morphological cell analysis finds the cellar shape, cellar regularity, classification, statistics, diagnosis, and so forth. In the last 20 years, about 1000 publications have reported the use of morphological cell analysis in biomedical research. Relevant solutions encompass a rather wide application area, such as cell clumps segmentation, morphological characteristics extraction, 3D reconstruction, abnormal cells identification, and statistical analysis. These reports are summarized in this paper to enable easy referral to suitable methods for practical solutions. Representative contributions and future research trends are also addressed.

The random-model method enables ab initio 3D reconstruction of asymmetric particles and determination of particle symmetry

Model-based, 3D reconstruction techniques depend on reliable starting models. We present an extension of the random-model method (RMM) that allows the ab initio generation of suitable starting models directly from un-averaged, experimental images of asymmetric or symmetric particles. Therefore, the asymmetric RMM can also be used to determine point-group symmetry. The procedure is facilitated by the use of (a) variable angular step-sizes during iterative origin and orientation searches, (b) high numbers of particle images, and (c) highly defocused images. The method is inhibited by mixed-handedness orientation assignments and by particles with inconspicuous features. For symmetric particles, symmetric RMMs can overcome these deficiencies.

Myosin assembly, maintenance and degradation in muscle: Role of the chaperone UNC-45 in myosin thick filament dynamics

Myofibrillogenesis in striated muscle cells requires a precise ordered pathway to assemble different proteins into a linear array of sarcomeres. The sarcomere relies on interdigitated thick and thin filaments to ensure muscle contraction, as well as properly folded and catalytically active myosin head. Achieving this organization requires a series of protein folding and assembly steps. The folding of the myosin head domain requires chaperone activity to attain its functional conformation. Folded or unfolded myosin can spontaneously assemble into short myosin filaments, but further assembly requires the short and incomplete myosin filaments to assemble into the developing thick filament. These longer filaments are then incorporated into the developing sarcomere of the muscle. Both myosin folding and assembly require factors to coordinate the formation of the thick filament in the sarcomere and these factors include chaperone molecules. Myosin folding and sarcomeric assembly requires association of classical chaperones as well as folding cofactors such as UNC-45. Recent research has suggested that UNC-45 is required beyond initial myosin head folding and may be directly or indirectly involved in different stages of myosin thick filament assembly, maintenance and degradation.

Electron microscopy and image processing: an essential tool for structural analysis of macromolecules

Macromolecular electron microscopy (EM) deals with macromolecular complexes and their placement within the cell-linking the molecular and cellular worlds as a bridge between atomic-resolution X-ray crystallographic or NMR studies and lower resolution light microscopy. The amount of specimen required is typically 10(2) to 10(3) times less than for X-ray crystallography or NMR. Electron micrographs of frozen-hydrated specimens portray native structures. Computer averaging yields enhanced images with reduced noise. Three-dimensional reconstructions may be computed from multiple views. Under favorable circumstances, resolutions of 7 to 10 A are achieved. Fitting atomic-resolution coordinates of components into three-dimensional density maps gives pseudo-atomic models of a complex's structure and interactions. Time-resolved experiments describe conformational changes. Electron tomography allows reconstruction of pleiomorphic complexes and sub-cellular structures. Electron crystallography has produced near-atomic resolution models of two-dimensional arrays, notably of membrane proteins.

Untangling desmosomal knots with electron tomography

Cell adhesion by adherens junctions and desmosomes relies on interactions between cadherin molecules. However, the molecular interfaces that define molecular specificity and that mediate adhesion remain controversial. We used electron tomography of plastic sections from neonatal mouse skin to visualize the organization of desmosomes in situ. The resulting three-dimensional maps reveal individual cadherin molecules forming discrete groups and interacting through their tips. Fitting of an x-ray crystal structure for C-cadherin to these maps is consistent with a flexible intermolecular interface mediated by an exchange of amino-terminal tryptophans. This flexibility suggests a novel mechanism for generating both cis and trans interactions and for propagating these adhesive interactions along the junction.

Molecular tectonic model of virus structural transitions: the putative cell entry states of poliovirus

Upon interacting with its receptor, poliovirus undergoes conformational changes that are implicated in cell entry, including the externalization of the viral protein VP4 and the N terminus of VP1. We have determined the structures of native virions and of two putative cell entry intermediates, the 135S and 80S particles, at approximately 22-A resolution by cryo-electron microscopy. The 135S and 80S particles are both approximately 4% larger than the virion. Pseudoatomic models were constructed by adjusting the beta-barrel domains of the three capsid proteins VP1, VP2, and VP3 from their known positions in the virion to fit the 135S and 80S reconstructions. Domain movements of up to 9 A were detected, analogous to the shifting of tectonic plates. These movements create gaps between adjacent subunits. The gaps at the sites where VP1, VP2, and VP3 subunits meet are plausible candidates for the emergence of VP4 and the N terminus of VP1. The implications of these observations are discussed for models in which the externalized components form a transmembrane pore through which viral RNA enters the infected cell.

Three-dimensional structure of poliovirus receptor bound to poliovirus

Poliovirus initiates infection by binding to its cellular receptor (Pvr). We have studied this interaction by using cryoelectron microscopy to determine the structure, at 21-A resolution, of poliovirus complexed with a soluble form of its receptor (sPvr). This density map aided construction of a homology-based model of sPvr and, in conjunction with the known crystal structure of the virus, allowed delineation of the binding site. The virion does not change significantly in structure on binding sPvr in short incubations at 4 degrees C. We infer that the binding configuration visualized represents the initial interaction that is followed by structural changes in the virion as infection proceeds. sPvr is segmented into three well-defined Ig-like domains. The two domains closest to the virion (domains 1 and 2) are aligned and rigidly connected, whereas domain 3 diverges at an angle of approximately 60 degrees. Two nodules of density on domain 2 are identified as glycosylation sites. Domain 1 penetrates the "canyon" that surrounds the 5-fold protrusion on the capsid surface, and its binding site involves all three major capsid proteins. The inferred pattern of virus-sPvr interactions accounts for most mutations that affect the binding of Pvr to poliovirus.

Adding the third dimension to virus life cycles: three-dimensional reconstruction of icosahedral viruses from cryo-electron micrographs

Viruses are cellular parasites. The linkage between viral and host functions makes the study of a viral life cycle an important key to cellular functions. A deeper understanding of many aspects of viral life cycles has emerged from coordinated molecular and structural studies carried out with a wide range of viral pathogens. Structural studies of viruses by means of cryo-electron microscopy and three-dimensional image reconstruction methods have grown explosively in the last decade. Here we review the use of cryo-electron microscopy for the determination of the structures of a number of icosahedral viruses. These studies span more than 20 virus families. Representative examples illustrate the use of moderate- to low-resolution (7- to 35-A) structural analyses to illuminate functional aspects of viral life cycles including host recognition, viral attachment, entry, genome release, viral transcription, translation, proassembly, maturation, release, and transmission, as well as mechanisms of host defense. The success of cryo-electron microscopy in combination with three-dimensional image reconstruction for icosahedral viruses provides a firm foundation for future explorations of more-complex viral pathogens, including the vast number that are nonspherical or nonsymmetrical.

Three-dimensional crystals of Ca2+-ATPase from sarcoplasmic reticulum: merging electron diffraction tilt series and imaging the (h, k, 0) projection

Electron crystallography offers an increasingly viable alternative to X-ray crystallography for structure determination, especially for membrane proteins. The methodology has been developed and successfully applied to 2D crystals; however, well-ordered thin, 3D crystals are often produced during crystallization trials and generally discarded due to complexities in structure analysis. To cope with these complexities, we have developed a general method for determining unit cell geometry and for merging electron diffraction data from tilt series. We have applied this method to thin, monoclinic crystals of Ca2+-ATPase from sarcoplasmic reticulum, thus characterizing the unit cell and generating a 3D set of electron diffraction amplitudes to 8 A resolution with tilt angles up to 30 degrees. The indexing of data from the tilt series has been verified by an analysis of Laue zones near the (h, k, 0) projection and the unit cell geometry is consistent with low-angle X-ray scattering from these crystals. Based on this unit cell geometry, we have systematically tilted crystals to record images of the (h, k, 0) projection. After averaging the corresponding phases to 8 A resolution, an (h, k, 0) projection map has been calculated by combining image phases with electron diffraction amplitudes. This map contains discrete densities that most likely correspond to Ca2+-ATPase dimers, unlike previous maps of untilted crystals in which molecules from successive layers are not aligned. Comparison with a projection structure from tubular crystals reveals differences that are likely due to the conformational change accompanying calcium binding to Ca2+-ATPase.

The structure of alfalfa mosaic virus capsid protein assembled as a T=1 icosahedral particle at 4.0-A resolution

K. Fukuyama, S. S. Abdel-Meguid, J. E. Johnson, and M. G. Rossmann (J. Mol. Biol. 167:873-984, 1983) reported the structure of alfalfa mosaic virus assembled from the capsid protein as a T=1 icosahedral empty particle at 4.5-A resolution. The information contained in the structure included the particle size, protein shell thickness, presence of wide holes at the icosahedral fivefold axes, and a proposal that the capsid protein adopts a beta-barrel structure. In the present work, the X-ray diffraction data of Fukuyama et al. as well as the data subsequently collected by I. Fita, Y. Hata, and M. G. Rossmann (unpublished) were reprocessed to 4.0-A resolution, and the structure was solved by molecular replacement. The current structure allowed the tracing of the polypeptide chain of the capsid protein confirming the beta-sandwich fold and provides information on intersubunit interactions in the particle. However, it was not possible to definitively assign the amino acid sequence to the side chain density at 4-A resolution. The particle structure was also determined by cryoelectron microscopy and image reconstruction methods and found to be in excellent agreement with the X-ray model.

Visualization of a 4-helix bundle in the hepatitis B virus capsid by cryo-electron microscopy

Despite the development of vaccines, the hepatitis B virus remains a major cause of human liver disease. The virion consists of a lipoprotein envelope surrounding an icosahedral capsid composed of dimers of a 183-residue protein, 'core antigen' (HBcAg). Knowledge of its structure is important for the design of antiviral drugs, but it has yet to be determined. Residues 150-183 are known to form a protamine-like domain required for packaging RNA, and residues 1-149 form the 'assembly domain' that polymerizes into capsids and, unusually for a capsid protein, is highly alpha-helical. Density maps calculated from cryo-electron micrographs show that the assembly domain dimer is T-shaped: its stem constitutes the dimer interface and the tips of its arms make the polymerization contacts. By refining the procedures used to calculate the map, we have extended the resolution to 9 A, revealing major elements of secondary structure. In particular, the stem, which protrudes as a spike on the capsid's outer surface, is a 4-helix bundle, formed by the pairing of alpha-helical hairpins from both subunits.

DNA packaging intermediates of bacteriophage φX174

BACKGROUND

Like many viruses, bacteriophage phi X174 packages its DNA genome into a procapsid that is assembled from structural intermediates and scaffolding proteins. The procapsid contains the structural proteins F, G and H, as well as the scaffolding proteins B and D. Provirions are formed by packaging of DNA together with the small internal J proteins, while losing at least some of the B scaffolding proteins. Eventually, loss of the D scaffolding proteins and the remaining B proteins leads to the formation of mature virions.

RESULTS

phi X174 108S 'procapsids' have been purified in milligram quantities by removing 114S (mature virion) and 70S (abortive capsid) particles from crude lysates by differential precipitation with polyethylene glycol. 132S 'provirions' were purified on sucrose gradients in the presence of EDTA. Cryo-electron microscopy (cryo-EM) was used to obtain reconstructions of procapsids and provirions. Although these are very similar to each other, their structures differ greatly from that of the virion. The F and G proteins, whose atomic structures in virions were previously determined from X-ray crystallography, were fitted into the cryo-EM reconstructions. This showed that the pentamer of G proteins on each five-fold vertex changes its conformation only slightly during DNA packaging and maturation, whereas major tertiary and quaternary structural changes occur in the F protein. The procapsids and provirions were found to contain 120 copies of the D protein arranged as tetramers on the two-fold axes. DNA might enter procapsids through one of the 30 A diameter holes on the icosahedral three-fold axes.

CONCLUSIONS

Combining cryo-EM image reconstruction and X-ray crystallography has revealed the major conformational changes that can occur in viral assembly. The function of the scaffolding proteins may be, in part, to support weak interactions between the structural proteins in the procapsids and to cover surfaces that are subsequently required for subunit-subunit interaction in the virion. The structures presented here are, therefore, analogous to chaperone proteins complexed with folding intermediates of a substrate.

Visualization of dynamic simulations of muscle thin filaments

Following a novel computational formalism, the thin filament of muscle can be modeled by a computational machine containing a large number of finite automata that have one-to-one correspondence with the constituent protein molecules. Computer graphics can be used to visualize the correspondence between the states of finite automata and the configurations of protein molecules according to the structural data. The dynamic simulation of the muscle filament that corresponds to the concurrent state transitions of finite automata can be represented as a sequence of video images. The kinetic and structural knowledge of individual protein molecules is, therefore, integrated into a coherent and functional system. This type of computation and visualization can also be useful for the investigation of molecular structure, function, and interaction in various complex biological systems.

Structures of the native and swollen forms of cowpea chlorotic mottle virus determined by X-ray crystallography and cryo-electron microscopy

BACKGROUND

RNA-protein interactions stabilize many viruses and also the nucleoprotein cores of enveloped animal viruses (e.g. retroviruses). The nucleoprotein particles are frequently pleomorphic and generally unstable due to the lack of strong protein-protein interactions in their capsids. Principles governing their structures are unknown because crystals of such nucleoprotein particles that diffract to high resolution have not previously been produced. Cowpea chlorotic mottle virions (CCMV) are typical of particles stabilized by RNA-protein interactions and it has been found that crystals that diffract beyond 4.5 A resolution are difficult to grow. However, we report here the purification of CCMV with an exceptionally mild procedure and the growth of crystals that diffract X-rays to 3.2 A resolution.

RESULTS

The 3.2 A X-ray structure of native CCMV, an icosahedral (T = 3) RNA plant virus, shows novel quaternary structure interactions based on interwoven carboxyterminal polypeptides that extend from canonical capsid beta-barrel subunits. Additional particle stability is provided by intercapsomere contacts between metal ion mediated carboxyl cages and by protein interactions with regions of ordered RNA. The structure of a metal-free, swollen form of the virus was determined by cryo-electron microscopy and image reconstruction. Modeling of this structure with the X-ray coordinates of the native subunits shows that the 29 A radial expansion is due to electrostatic repulsion at the carboxyl cages and is stopped short of complete disassembly by preservation of interwoven carboxyl termini and protein-RNA contacts.

CONCLUSIONS

The CCMV capsid displays quaternary structural interactions that are unique compared with previously determined RNA virus structures. The loosely coupled hexamer and pentamer morphological units readily explain their versatile reassembly properties and the pH and metal ion dependent polymorphism observed in the virions. Association of capsomeres through inter-penetrating carboxy-terminal portions of the subunit polypeptides has been previously described only for the DNA tumor viruses, SV40 and polyoma.

Structural changes in muscle crossbridges accompanying force generation

We have investigated the structure of the crossbridges in muscles rapidly frozen while relaxed, in rigor, and at various times after activation from rigor by flash photolysis of caged ATP. We used Fourier analysis of images of cross sections to obtain an average view of the muscle structure, and correspondence analysis to extract information about individual crossbridge shapes. The crossbridge structure changes dramatically between relaxed, rigor, and with time after ATP release. In relaxed muscle, most crossbridges are detached. In rigor, all are attached and have a characteristic asymmetric shape that shows strong left-handed curvature when viewed from the M-line towards the Z-line. Immediately after ATP release, before significant force has developed (20 ms) the homogeneous rigor population is replaced by a much more diverse collection of crossbridge shapes. Over the next few hundred milliseconds, the proportion of attached crossbridges changes little, but the distribution of the crossbridges among different structural classes continues to evolve. Some forms of attached crossbridge (presumably weakly attached) increase at early times when tension is low. The proportion of several other attached non-rigor crossbridge shapes increases in parallel with the development of active tension. The results lend strong support to models of muscle contraction that have attributed force generation to structural changes in attached crossbridges.

3D reconstruction by combining data from sections cut oblique to different unit cell axes

Oblique section reconstruction (OSR) can produce a 3D image from a single micrograph of a section through a 2D or 3D crystal. Resolution, however, is limited in a direction perpendicular to the section plane. When data from sections cut at different orientations are combined, the inherent resolution limitation for single sections can be overcome. In the extreme, combination of sections cut oblique to different principal planes of the unit cell can produce a 3D reconstruction with isotropic resolution. The merging of data from different sections requires determination of section thickness and orientation. A method for section thickness determination is described that is generally applicable event to space groups with little or no symmetry. In addition, an approach has been developed to determine rotational orientation within the hexagonal lattice of insect flight muscle. Finally, an iterative least-squares fitting method is applied to determine a 3D set of deconvoluted structure factors from the merged data.

Molecular movements in contracting muscle: towards "muscle--the movie"

The recent publication of the crystal structures of G-actin and of myosin subfragment-1, together with analysis of a time-resolved series of well sampled low-angle 2D X-ray diffraction patterns from bony fish muscle permits the study of the molecular movements in muscle that are associated with generation and regulation of contractile force. Here it is shown that even though low-angle (i.e. low resolution) X-ray diffraction patterns are being used, these patterns are sensitive, for example, to sub-domain movements of as little as 3 A or 4 degrees within the actin monomers of actin filaments. Actin filament diffraction patterns from whole muscle are being used to define actin domain and tropomyosin movements involved in regulation. Myosin and actin filament diffraction patterns are being used together to start to show how the complete "quasi-crystalline" unit cell in the bony fish muscle A-band can be modelled as a series of time-slices through a typical tetanic contraction of the muscle. In this way, the time sequence of images can be used to create "muscle--the movie".

Functional implications of quasi-equivalence in a T = 3 icosahedral animal virus established by cryo-electron microscopy and X-ray crystallography

BACKGROUND

Studies of simple RNA animal viruses show that cell attachment, particle destabilization and cell entry are complex processes requiring a level of capsid sophistication that is difficult to achieve with a shell containing only a single gene product. Nodaviruses [such as Flock House virus (FHV)] are an exception. We have previously determined the structure of FHV at 3 A resolution, and now combine this information with data from cryo-electron microscopy in an attempt to clarify the process by which nodaviruses infect animal cells.

RESULTS

A difference map was computed in which electron density at 22 A resolution, derived from the 3.0 A resolution X-ray model of the FHV capsid protein, was subtracted from the electron density derived from the cryo-electron microscopy reconstruction of FHV at 22 A resolution. Comparisons of this density with the X-ray model showed that quasi-equivalent regions of identical polypeptide sequences have markedly different interactions with the bulk RNA density. Previously reported biphasic kinetics of particle maturation and the requirement of subunit cleavage for particle infectivity are consistent with these results.

CONCLUSIONS

On the basis of this study we propose a model for nodavirus infection that is conceptually similar to that proposed for poliovirus but differs from it in detail. The constraints of a single protein type in the capsid lead to a noteworthy use of quasi-symmetry not only to control the binding of a 'pocket factor' but also to modulate maturation cleavage and to release a pentameric helical bundle (with genomic RNA attached) that may further interact with the cell membrane.

Determination of spin-label orientation within the myosin head

Current methods of analyzing EPR spectra of spin-labeled muscle fibers allow the determination of spin-label orientation within the fiber, rather than the orientation of the myosin head itself. In order to describe the orientational distribution of spin labeled myosin heads within the muscle fibers, the orientation of the spin label within the myosin head must be known. The iodoacetamide label orientation in the myosin head was determined to be (16.8 degrees, 28.3 degrees, 4.2 degrees) or (16.6 degrees, 72.0 degrees, 4.3 degrees). These Eulerian angles were obtained from the analysis of EPR spectra of fibers decorated with labeled myosin heads in the absence of ATP, with the assumption that the head's tilt angle is 40 degrees, as observed in a recent EM study [Pollard, T., Bhandari, D., Maupin, P., Wachsstock, D., Weeds, A. & Zot, H. (1993) Biophys. J. 64, 454-471]. Knowledge of spin-label orientation will allow for quantitative determination of myosin head orientation in the various states of the contractile cycle.

A functional recombinant myosin II lacking a regulatory light chain-binding site

Myosin II, which converts the energy of adenosine triphosphate hydrolysis into the movement of actin filaments, is a hexamer of two heavy chains, two essential light chains, and two regulatory light chains (RLCs). Dictyostelium myosin II is known to be regulated in vitro by phosphorylation of the RLC. Cells in which the wild-type myosin II heavy chain was replaced with a recombinant form that lacks the binding site for RLC carried out cytokinesis and almost normal development, processes known to be dependent on functional myosin II. Characterization of the purified recombinant protein suggests that a complex of RLC and the RLC binding site of the heavy chain plays an inhibitory role for adenosine triphosphatase activity and a structural role for the movement of myosin along actin.

Inhibition of actin filament movement by monoclonal antibodies against the motor domain of myosin

Conformational transitions in defined regions of the motor domain of skeletal muscle myosin involved in ATP hydrolysis, actin binding and motility were probed with monoclonal antibodies. Competition binding assays demonstrate that three different monoclonal antibodies react with spatially related sites on the myosin heavy chain. One recognizes a sequential epitope between residues 65 and 80 and has no effect on actin filament movement in an in vitro motility assay despite tight binding to myosin and acto-S1. The other two monoclonal antibodies react with sequential epitopes between residues 29 and 60 and both inhibit actin filament movement. A fourth monoclonal antibody reacts with the N-terminus of the heavy chain (residues 1-12) at a spatially distinct site on the myosin head and also inhibits actin filament movement. These four monoclonal antibodies have been mapped by immunoelectron microscopy to the large, actin binding region of the myosin head; however, the antibody binding sites remain accessible on rigor complexes of acto-S1. Thus, this group of monoclonal antibodies identify sequential epitopes in a mobile segment of the myosin heavy chain. In addition, two conformation-sensitive monoclonal antibodies are described that are affected by ATP and actin binding to myosin S1, and display distinct and marked inhibitory effects on actin filament movement. In contrast, an anti-light chain monoclonal antibody that binds near the myosin head-rod junction has little effect on the number and velocity of moving actin filaments. These results identify mobile regions on the myosin head that are perturbed by antibody binding and that may be linked to force production and motion.

Transient detection of spin-labeled myosin subfragment 1 conformational states during ATP hydrolysis

We have used time-resolved electron paramagnetic resonance spectroscopy and caged ATP to detect nucleotide-induced changes in the conformational state of spin-labeled myosin heads (IASL-S1). Changes in the internal rotational dynamics of IASL-S1 were monitored with millisecond time resolution during the pre-steady-state phase of ATP hydrolysis. The changes in the internal protein dynamics were rigorously correlated with specific biochemical kinetic transitions, allowing us to observe directly the dynamic sequence of structural changes in IASL-S1 during the binding and hydrolysis of ATP. When caged ATP was photolyzed (producing 500 microM ATP) in the presence of 100 microM IASL-S1, the EPR signal intensity rose transiently to the steady-state ATPase level, indicating increased rotational motion about the SH1 region of the myosin head. Kinetic and spectral analyses have resolved two phases of this transient, one representing the population of the M*.ATP state and the other representing the population of the M**.ADP.Pi state. We conclude that two motionally distinct states of the myosin head are present during ATP hydrolysis and that these states represent distinct conformational states that can be correlated with specific biochemical intermediates. Since specific labeling of myosin heads with IASL has been achieved in skinned muscle fibers, this study establishes the feasibility for the first direct detection and resolution of myosin's conformational transients during muscle contraction.

A new perspective on muscle contraction

Recent experimental findings suggest that the myosin cross-bridge theory may no longer be adequate to account for certain basic facts concerning muscle contraction. A newly-proposed mechanism based on length changes in actin filaments might be the basis for a simpler explanation for how the free energy of ATP hydrolysis can be transduced into work by muscle fibers.

Porters versus rowers: a unified stochastic model of motor proteins

We present a general phenomenological theory for chemical to mechanical energy transduction by motor enzymes which is based on the classical "tight-coupling" mechanism. The associated minimal stochastic model takes explicitly into account both ATP hydrolysis and thermal noise effects. It provides expressions for the hydrolysis rate and the sliding velocity, as functions of the ATP concentration and the number of motor enzymes. It explains in a unified way many results of recent in vitro motility assays. More importantly, the theory provides a natural classification scheme for the motors: it correlates the biochemical and mechanical differences between "porters" such as cellular kinesins or dyneins, and "rowers" such as muscular myosins or flagellar dyneins.

Saturation transfer electron parametric resonance of an indane-dione spin-label. Calibration with hemoglobin and application to myosin rotational dynamics

We have used a recently synthesized indane-dione spin label (2-[-oxyl-2,2,5,5-tetramethyl-3-pyrrolin-3-yl)methenyl]in dane-1,3-dione (InVSL) to study the rotational dynamics of myosin, with saturation-transfer electron paramagnetic resonance (ST-EPR). To determine effective rotational correlation times (tau effr) from InVSL spectra, reference spectra corresponding to known correlation times (tau r) were obtained from InVSL-hemoglobin undergoing isotropic rotational motion in aqueous glycerol solutions. These spectra were used to generate plots of spectral parameters vs. tau r. These plots should be used to analyze ST-EPR spectra of InVSL bound to other proteins, because the spectra are different from those of tempo-maleimide-spin-labeled hemoglobin, which have been used previously as ST-EPR standards. InVSL was covalently attached to the head (subfragment-1; S1) of myosin. EPR spectra and K/EDTA-ATPase activity showed that 70-95% of the heads were labeled, with > or = 90% of the label bound to either cys 707 (SH1) or cys 697 (SH2). ST-EPR spectra of InVSL-S1 attached to glass beads, bound to actin in myofibrils, or precipitated with ammonium sulfate indicated no submillisecond rotational motion. Therefore, InVSL is rigidly immobilized on the protein so that it reports the global rotation of the myosin head. The ST-EPR spectra of InVSL-myosin monomers and filaments indicated tau effr values of 4 and 13 microseconds, respectively, showing that myosin heads undergo microsecond segmental rotations that are more restricted in filaments than in monomers. The observed tau effr values are longer than those previously obtained with other spin labels bound to myosin heads, probably because InVSL binds more rigidly to the protein and/or with a different orientation. Further EPR studies of InVSL-myosin in solution and in muscle fibers should prove complementary to previous work with other labels.

Structure of human rhinovirus complexed with Fab fragments from a neutralizing antibody

We have determined the structure of a human rhinovirus (HRV)-Fab complex by using cryoelectron microscopy and image reconstruction techniques. This is the first view of an intact human virus complexed with a monoclonal Fab (Fab17-IA) for which both atomic structures are known. The surface area on HRV type 14 (HRV14) in contact with Fab17-IA was approximately 500 A2 (5 nm2), which is much larger than the area that constitutes the NIm-IA epitope (on viral protein VP1) defined by natural escape mutants. From modeling studies and electrostatic potential calculations, charged residues outside the neutralizing immunogenic site IA (NIm-IA) were also predicted to be involved in antibody recognition. These predictions were confirmed by site-specific mutations and analysis of the Fab17-IA-HRV14 complex, along with knowledge of the crystallographic structures of HRV14 and Fab17-IA. The bound Fab17-IA reaches across a surface depression (the canyon) and meets a related Fab at the nearest icosahedral twofold axis. By adjusting the elbow angles of the bound Fab fragments from 162 degrees to 198 degrees, an intact antibody molecule can be easily modeled. This, along with aggregation and binding stoichiometry results, supports the earlier proposal that this antibody binds bivalently to the surface of HRV14 across icosahedral twofold axes. One prediction of this model, that the intact canyon-spanning immunoglobulin G molecule would block attachment of the virus to HeLa cells, was confirmed experimentally.

Direct visualization by electron microscopy of the weakly bound intermediates in the actomyosin adenosine triphosphatase cycle

We used a novel stopped-flow/rapid-freezing machine to prepare the transient intermediates in the actin-myosin adenosine triphosphatase (ATPase) cycle for direct observation by electron microscopy. We focused on the low affinity complexes of myosin-adenosine triphosphate (ATP) and myosin-adenosine diphosphate (ADP)-Pi with actin filaments since the transition from these states to the high affinity actin-myosin-ADP and actin-myosin states is postulated to generate the molecular motion that drives muscle contraction and other types of cellular movements. After rapid freezing and metal replication of mixtures of myosin subfragment-1, actin filaments, and ATP, the structure of the weakly bound intermediates is indistinguishable from nucleotide-free rigor complexes. In particular, the average angle of attachment of the myosin head to the actin filament is approximately 40 degrees in both cases. At all stages in the ATPase cycle, the configuration of most of the myosin heads bound to actin filaments is similar, and the part of the myosin head preserved in freeze-fracture replicas does not tilt by more than a few degrees during the transition from the low affinity to high affinity states. In contrast, myosin heads chemically cross-linked to actin filaments differ in their attachment angles from ordered at 40 degrees without ATP to nearly random in the presence of ATP when viewed by negative staining (Craig, R., L.E. Greene, and E. Eisenberg. 1985. Proc. Natl. Acad. Sci. USA. 82:3247-3251, and confirmed here), freezing in vitreous ice (Applegate, D., and P. Flicker. 1987. J. Biol. Chem. 262:6856-6863), and in replicas of rapidly frozen samples. This suggests that many of the cross-linked heads in these preparations are dissociated from but tethered to the actin filaments in the presence of ATP. These observations suggest that the molecular motion produced by myosin and actin takes place with the myosin head at a point some distance from the actin binding site or does not involve a large change in the shape of the myosin head.

The effect of lattice spacing change on cross-bridge kinetics in rabbit psoas fibers

The effect of compression on the elementary steps of the cross-bridge cycle was investigated with the sinusoidal analysis technique and ATP hydrolysis rate measurement. The lattice spacing of rabbit psoas muscle fibers was osmotically compressed with a macromolecule, dextran T-500 (0-16%). The effects of MgATP, MgADP, Pi on exponential processes (B), (C), (D), and isometric tension were studied at different dextran concentrations. The experiments were performed at the saturating Ca concentration (pCa 4.5-4.8), 200 mM ionic strength, pH 7.0, and 20 degrees C. Our results show that the fiber width decreased linearly with an increase in the dextran concentration, and the width measurement was perfectly correlated with the lattice spacing measurement using equatorial x-ray diffraction studies. We find that the nucleotide binding steps, the ATP-isomerization step, and the cross-bridge detachment step were minimally affected by the compression. Our results indicate that the rate constant of the reverse power stroke step (k-4) decreases with mild compression (0-6.3% dextran), presumably because of the stabilization of the attached cross-bridges in the AM*DP state. We also found that the rate constant of the power stroke step (k4) decreases with higher compression (> 6.3% dextran), presumably because of increased difficulty in performing the power stroke reaction. Our results further show that the association constant (K5) of phosphate to cross-bridges is not changed with compression. The ATP hydrolysis rate declined almost linearly with an increase in the dextran concentration. This observation indicates that the rate limiting step is also affected by the lattice spacing change so that the associated rate constant (k6) becomes progressively less with compression.

Structural studies on the conformations of myosin

Myosin is the major motor protein found in vertebrate striated and smooth muscle and in non-muscle cells where, in association with actin, its main role is to convert chemical energy into mechanical work. Smooth muscle and non-muscle myosin adopts a number of different conformations: for example an unfolded (6S) form which is capable of forming filaments and generating force and a 'folded' (10S) form, which is most probably a storage form incapable of forming filaments. In the 10S form the products of ATP cleavage are trapped by the folded tails and the ATPase activity of myosin is greatly reduced. It is believed that a transition to the unfolded 6S form is necessary prior to filament formation. We report here on two relatively low resolution structural techniques for studying hydrated myosin. We have used a relatively recent development in microscopy, the scanning tunneling microscope, to image a series of biologically interesting specimen, mainly to evaluate the potential of the technique. There are significant potential advantages for imaging biological specimen with the STM as the imaging is done in air and the specimen can be imaged without a metal coating. Our experience with imaging myosin suggests that good images of hydrated myosin can be obtained but with poor reproducibility. We have also carried out small angle solution x-ray scattering studies on the two myosin conformations to explore the possibilities of doing kinetic measurements on the transition between the two states. Small angle scattering from the S1 fragment are re-constituted parts of the rod have also been carried out and the data is compared with expected scattering from model structures.

The effect of the lattice spacing change on cross-bridge kinetics in chemically skinned rabbit psoas muscle fibers. II. Elementary steps affected by the spacing change

The actin-myosin lattice spacing of rabbit psoas fibers was osmotically compressed with a dextran T-500, and its effect on the elementary steps of the cross-bridge cycle was investigated. Experiments were performed at the saturating Ca (pCa 4.5-4.9), 200 mM ionic strength, pH 7.0, and at 20 degrees C, and the results were analyzed by the following cross-bridge scheme: [formula: see text] where A = actin, M = myosin head, S = MgATP, D = MgADP, and P = Pi = phosphate. From MgATP and MgADP studies on exponential process (C) and (D), the association constants of cross-bridges to MgADP (K0), MgATP (K1a), the rate constants of the isomerization of the AM S state (k1b and k-1b), and the rate constants of the cross-bridge detachment step (k2 and k-2) were deduced. From Pi study on process (B), the rate constants of the cross-bridge attachment (power stroke) step (k4- and k-4) and the association constant of Pi ions to cross-bridges (K5) were deduced. From ATP hydrolysis measurement, the rate constant of ADP-isomerization (rate-limiting) step (k6) was deduced. These kinetic constants were studied as functions of dextran concentrations. Our results show that nucleotide binding, the ATP-isomerization, and the cross-bridge detachment steps are minimally affected by the compression. The rate constant of the reverse power stroke step (k-4) decreases with mild compression (0-6.3% dextran), presumably because of the stabilization of the attached cross-bridges in the AM*DP state. The rate constant of the power stroke step (k4) does not change with mild compression, but it decreases with higher compression (> 6.3% dextran), presumably because of an increased difficulty in performing the power stroke. These results are consistent with the observation that isometric tension increases with a low level of compression and decreases with a high level of compression. Our results also show that the association constant K5 of Pi with cross-bridge state AM*D is not changed with compression. Our result further show that the ATP hydrolysis rate decreased with compression, and that the rate constants of the ADP-isomerization step (k6) becomes progressively less with compression. The effect of compression on the power stroke step and rate-limiting step implies that a large-scale molecular rearrangement in the myosin head takes place in these two slow reaction steps.

Structure of the myosin head in solution and the effect of light chain 2 removal

Structural properties of rabbit skeletal myosin head (S1) and the influence of the DTNB light chain (LC2) on the size and shape of myosin heads in solution were investigated by small angle x-ray scattering. The LC2 deficient myosin head, S1 (-LC2), and the S1 containing LC2 light chain, S1 (+LC2) were studied in parallel. The respective values of the radius of gyration were found to be (40.2 +/- 0.5) A and (46.7 +/- 1) A, while the maximum dimension was (190 +/- 15) A for both species. The large difference between the two Rg values suggest that LC2 is located close to one extremity of the myosin head, in agreement with most electron microscopy observations. All models derived from the x-ray scattering pattern of the native myosin head share a common overall morphology, showing two main regions, an asymmetric globular portion which tapers smoothly into a thinner domain of roughly equivalent length making an angle of approximately 60 degrees, with a contour length of approximately 210 A.

Effects of nucleotide binding on thermal transitions and domain structure of myosin subfragment 1

The thermal unfolding and domain structure of myosin subfragment 1 (S1) from rabbit skeletal muscles and their changes induced by nucleotide binding were studied by differential scanning calorimetry. The binding of ADP to S1 practically does not influence the position of the thermal transition (maximum at 47.2 degrees C), while the binding of the non-hydrolysable analogue of ATP, adenosine 5'-[beta, gamma-imido]triphosphate (AdoPP[NH]P) to S1, or trapping of ADP in S1 by orthovanadate (Vi), shift the maximum of the heat adsorption curve for S1 up to 53.2 and 56.1 degrees C, respectively. Such an increase of S1 thermostability in the complexes S1-AdoPP[NH]P and S1-ADP-Vi is confirmed by results of turbidity and tryptophan fluorescence measurements. The total heat adsorption curves for S1 and its complexes with nucleotides were decomposed into elementary peaks corresponding to the melting of structural domains in the S1 molecule. Quantitative analysis of the data shows that the domain structure of S1 in the complexes S1-AdoPP[NH]P and S1-ADP-Vi is similar and differs radically from that of nucleotide-free S1 and S1 in the S1-ADP complex. These data are the first direct evidence that the S1 molecule can be in two main conformations which may correspond to different states during the ATP hydrolysis: one of them corresponds to nucleotide-free S1 and to the complex S1-ADP, and the other corresponds to the intermediate complexes S1-ATP and S1-ADP-Pi. Surprisingly it turned out that the domain structure of S1 with ADP trapped by p-phenylene-N, N'-dimaleimide (pPDM) thiol cross-linking almost does not differ from that of the nucleotide-free S1. This means that pPDM-cross-linked S1 in contrast to S1-AdoPP[NH]P and S1-ADP-Vi can not be considered a structural analogue of the intermediate complexes S1-ATP and S1-ADP-Pi.

MgATP binding changes neither the shape nor the flexibility of the heads of single myosin molecules

The structural mechanism by which myosin heads exert force is unknown. One possibility is that the tight binding of the heads to actin drives them into a force-generating configuration. Another possibility is that the force-generating conformational change is inherent to the myosin heads. In this case the heads would make force by changing their shape according to the species of nucleotide in their active sites, the tight attachment to actin serving only to provide traction. To test this latter possibility, we used negative stain electron microscopy to search for a MgATP-induced shape change in the heads of single myosin molecules. We compared the heads of 10S smooth muscle myosin monomers (wherein MgATP is trapped at the active site) with the MgATP-free heads of 6S monomers. We found that to a resolution of about 2 nm, MgATP binding to the unrestrained myosin head does not drive it to change its shape or its flexibility. This result suggests that the head makes force by virtue of an induced fit to actin.

Small-angle synchrotron x-ray scattering reveals distinct shape changes of the myosin head during hydrolysis of ATP

In the energy transduction of muscle contraction, it is important to know the nature and extent of conformational changes of the head portion of the myosin molecules. In the presence of magnesium adenosine triphosphate (MgATP), fairly large conformational changes of the myosin head [subfragment-1 (S1)] in solution were observed by small-angle x-ray scattering with the use of synchrotron radiation as an intense and stable x-ray source. The presence of MgATP reduced the radius of gyration of the molecule by about 3 angstrom units and the maximum chord length by about 10 angstroms, showing that the shape of S1 becomes more compact or round during hydrolysis of MgATP. Comparison with various nucleotide-bound S1 complexes that correspond to the known intermediate states during ATP hydrolysis indicates that the shape of S1 in a key intermediate state, S1-bound adenosine diphosphate (ADP) and phosphate [S1**.ADP.P(i)], differs significantly from the shape in the other intermediate states of the S1 adenosine triphosphatase cycle as well as that of nucleotide-free S1.

Insect crossbridges, relaxed by spin-labeled nucleotide, show well-ordered 90 degrees state by X-ray diffraction and electron microscopy, but spectra of electron paramagnetic resonance probes report disorder

The structure of glycerinated Lethocerus insect flight muscle fibers, relaxed by spin-labeled ATP and vanadate (Vi), was examined using X-ray diffraction, electron microscopy and electron paramagnetic resonance (e.p.r.) spectra. We obtained excellent relaxation of MgATP quality as determined by mechanical criteria, using vanadate trapping of 2' spin-labeled 3' deoxyATP at 3 degree C. In rigor fibers, when the diphosphate analog is bound in the absence of Vi, the probes on myosin heads are well-ordered, in agreement with electron microscopic and X-ray patterns showing that myosin heads are ordered when attached strongly to actin. In relaxed muscle, however, e.p.r. spectra report orientational disorder of bound (Vi-trapped) spin-labeled nucleotide, while electron microscopic and X-ray patterns both show well-ordered bridges at a uniform 90 degrees angle to the filament axis. The spin-labeled nucleotide orientation is highly disordered, but not completely isotropic; the slight anisotropy observed in probe spectra is consistent with a shift of approximately 10% of probes from angles close to 0 degrees to angles close to 90 degrees. Measurements of probe mobility suggest that the interaction between probe and protein remains as tight in relaxed fibers as in rigor, and thus that the disorder in relaxed fibers arises from disorders of (or within) the protein and not from disorder of the probe relative to the protein. Fixation of the relaxed fibers with glutaraldehyde did not alter any aspect of the spectrum of the Vi-trapped analog, including the slight order observed, showing that the extensive inter- and intra-molecular cross-linking of the first step of sample preparation for electron microscopy had not altered relaxed crossbridge orientations. Two models that may reconcile the apparently disparate results obtained on relaxed fibers are presented: (1) a rigid myosin head could possess considerable disorder in the regular array about the thick filament; or (2) the nucleotide site could be on a disordered, probably distal, domain of myosin, while a more proximal region is well ordered on the thick filament backbone. Our findings suggest that when e.p.r. probes signal disorder of a local site or domain, this is complementary, not contradictory, to signals of general order. The e.p.r. spectra show that a portion of the myosin molecule can be disordered at the same time as the X-ray diffraction and electron microscopy show the bulk of myosin head mass to be uniformly oriented and regularly arrayed.

Electron microscopy of thin-sectioned three-dimensional crystals of SecA protein from Escherichia coli: structure in projection at 40 A resolution

SecA is a single-chain, membrane-associated polypeptide (102 kDa) which functions as an essential component of the protein export machinery of Escherichia coli. SecA has been crystallized from ammonium sulfate as small, three-dimensional bipyramidal crystals (0.1 x 0.1 x 0.05 mm). These crystals did not demonstrate detectable diffraction of X-rays from rotating anode sources. For study by electron microscopy, individual crystals were cross-linked in glutaraldehyde and OsO4 solutions, dehydrated, embedded in epoxy resin, and sectioned normal to crystallographic axial directions inferred from the external morphology of the crystals. Fourier transformation of processed images of untilted thin sections stained with uranyl acetate and lead citrate show reflections extending to 31 A resolution. Diffraction data and reconstructed images of the projected density of the unit cell contents indicate that the bipyramidal SecA crystals belong to orthorhombic space group C222(1) with unit cell dimensions a = 414 A, b = 381 A, and c = 243 A. Filtered images and density maps of mutually orthogonal projections of the unit cell contents are consistent with a three-dimensional model in which the asymmetric unit contains eight SecA monomers. The large unit cell dimensions and packing of protein monomers suggest that SecA is crystallizing as an oligomer of either dimers or tetramers.

Site-specific amino-terminal mutants of yeast-expressed beta-actin. Characterization of the interaction with myosin and tropomyosin

Neutral or charge-shifting mutagenesis of beta-actin at positions 3 and 4 strongly influenced the actomyosin interaction under non-rigor conditions. The polymerization behaviour and tropomyosin binding properties on the other hand remained unaffected.

Shape and length of myosin heads

There is controversy concerning the shape and length of myosin heads. In the present paper we try to analyse the data and to draw clear conclusions in this field. When the myosin heads are isolated (S1) from the rest of the molecule, their length is approximately 12 nm and their shape is close to that of a prolate ellipsoid with an axial ratio approximately 2.3 (in solution) or close to that of a comma when attached to F-actin (with a length of 12-13 nm). When the myosin heads are observed on a whole molecule, their length is approximately 19 nm and they are pear-shaped. Here we suggest that all these observations are compatible. We believe that, for a whole myosin molecule, a large part of the head-rod joint (S1/S2 joint) is measured with the head, owing to a particularly heavy staining or shadowing of this joint. On the other hand, S1 is probably built up of a head part plus the S1/S2 joint, which is not revealed by the usual techniques (hydrodynamics, X-ray and neutron scattering). Finally, the comma shape would be related to a flexible part in the head region of S1, which is significantly bent when S1 is attached to F-actin, but which would be less bent for S1 in solution. A similar bending also occurs in crystalline S1.

Cauliflower mosaic virus: a 420 subunit (T = 7), multilayer structure

The structures of the Cabb-B and CM1841 strains of cauliflower mosaic virus (CaMV) have been solved to about 3 nm resolution from unstained, frozen-hydrated samples that were examined with low-irradiation cryo-electron microscopy and three-dimensional image reconstruction procedures. CaMV is highly susceptible to distortions. Spherical particles, with a maximum diameter of 53.8 nm, are composed of three concentric layers (I-III) of solvent-excluded density that surround a large, solvent-filled cavity (approximately 27 nm dia). The outermost layer (I) contains 72 capsomeric morphological units, with 12 pentavalent pentamers and 60 hexavalent hexamers for a total of 420 subunits (37-42 kDa each) arranged with T = 7 icosahedral symmetry. CaMV is the first example of a T = 7 virus that obeys the rules of stoichiometry proposed for isometric viruses by Caspar and Klug (1962, Cold Spring Harb. Symp. Quant. Biol. 27, 1-24), although the hexameric capsomers exhibit marked departure from the regular sixfold symmetry expected for a structure in which the capsid protein subunits are quasi-equivalently related. The double-stranded DNA genome is distributed in layers II and III along with a portion of the viral protein. The CaMV reconstructions are consistent with the model based on neutron diffraction studies (Kruse et al., 1987, Virology 159, 166-168) and, together, these structural models are discussed in relation to a replication-assembly model (Hull et al., 1987, J. Cell Sci. (Suppl.) 7, 213-229). Remarkable agreement between the reconstructions of CaMV Cabb-B and CM1841 suggests that other strains of CaMV adopt the same basic structure.

Actin mediated regulation of muscle contraction

Striated and smooth muscles have different mechanisms of regulation of contraction which can be the basis for selective pharmacological alteration of the contractility of these muscle types. The progression in our understanding of the tropomyosin-troponin regulatory system of striated muscle from the early 1970s through the early 1990s is described along with key concepts required for understanding this complex system. This review also examines the recent history of the putative contractile regulatory proteins of smooth muscle, caldesmon and calponin. A contrast is made between the actin linked regulatory systems of striated and smooth muscle.

The three-dimensional structure of frozen-hydrated bacteriophage phi X174

The three-dimensional structure of bacteriophage phi X174 (phi X174) was determined to approximately 2.6 nm resolution from images of frozen-hydrated 114 S particles. The outer surface of phi X174 is characterized by several prominent features: (i) 12 mushroom-shaped caps (approximately 7.1 nm wide x 3.8 nm high) are situated at each of the vertices of the icosahedral virion and extend to a maximum radius of 16.8 nm; (ii) a "collar" of density surrounds the base of each apical cap; and (iii) 20 conical protrusions (approximately 2.3 nm high) lie along the three-fold symmetry axes. The caps have a pentagonal morphology composed of five globular "subunits" and appear to be loosely connected to the underlying capsid. The distribution of the four gene products present in virions (60 copies each of gpF, gpG, and gpJ, and 12 copies of gpH), and the single-stranded DNA (ssDNA) genome cannot be directly discerned in the reconstructed density map, although plausible assignments can be made on the basis of solvent-excluded volume estimates and previous biochemical data. Thus, gpG accounts for most of the mass in the caps; gpH, a presumed cap protein, cannot be identified in part due to the symmetry-averaging procedures, but may be partially located within the interior of the capsid; and gpF and gpJ make up the remainder of the capsid. The genome appears to be less densely packaged inside the capsid compared to many dsDNA viruses whose nucleic acid is arranged in a liquid-crystalline state.