Influence of receptor lateral mobility on adhesion strengthening between membranes containing LFA-3 and CD2

DNA-Tethered Lipid Membrane Formation via Solvent-Assisted Self-Assembly

DNA-tethered lipid bilayers have been used in many studies, based on the controllable and well-defined properties of DNA tethers. However, their application has been limited, because it is difficult to cover a wide range of surfaces and achieve electrical insulation. We implemented an existing method, where a DNA hybrid chip on a silica or glass surface supports a lipid membrane using solvent-assisted self-assembly. The formation of a continuous lipid bilayer was confirmed through the change in quartz crystal microbalance dissipation results, depending on the presence or absence of DNA hybrids. The fluidity of the DNA-tethered lipid membranes was analyzed using a fluorescence microscope. The electrochemical analysis demonstrated the versatility of this new technique, which can be used for sensor or electrode surface modification for biosensors or bioelectronics.

Significance of Receptor Mobility in Multivalent Binding on Lipid Membranes

Numerous key biological processes rely on the concept of multivalency, where ligands achieve stable binding only upon engaging multiple receptors. These processes, like viral entry or immune synapse formation, occur on the diffusive cellular membrane. One crucial, yet underexplored aspect of multivalent binding is the mobility of coupled receptors. Here, we discuss the consequences of mobility in multivalent processes from four perspectives: (I) The facilitation of receptor recruitment by the multivalent ligand due to their diffusivity prior to binding. (II) The effects of receptor preassembly, which allows their local accumulation. (III) The consequences of changes in mobility upon the formation of receptor/ligand complex. (IV) The changes in the diffusivity of lipid environment surrounding engaged receptors. We demonstrate how understanding mobility is essential for fully unravelling the principles of multivalent membrane processes, leading to further development in studies on receptor interactions, and guide the design of new generations of multivalent ligands.

Binding kinetics of liposome conjugated E-selectin and P-selectin glycoprotein ligand-1 measured with atomic force microscopy

Various ligand-functionalized liposomes have been developed for targeted therapies. Typically, the binding properties of the ligands and targeted proteins are measured with surface plasmon resonance (SPR), where the proteins are immobilized on a rigid surface. However, the difference of protein-ligand binding kinetics between liposome-conjugated protein and rigid surface-conjugated protein is not fully understood. In this work, the binding kinetics of P-selectin glycoprotein ligand-1 (PSGL-1) and E-selectin conjugated on liposome and on rigid surfaces are investigated with Atomic Force Microscopy (AFM). The results suggest that protein orientation and diffusion on liposomal membrane can alter the binding kinetics of the protein-ligand interaction. Specifically, the association and dissociation rate constant of AFM probe-conjugated E-selectin and glass-conjugated PSGL-1 are measured as 9.32 × 10⁴ M^-1s^-1 and 1.54 s^-1, respectively. While for the liposome-conjugated E-selectin and glass-conjugated PSGL-1, the kinetic constants are measured as 5.00 × 10⁷ M^-1s^-1 and 2.76 s^-1, respectively. Thus, there is an order's magnitude increase of binding affinity (from k_d = 16.51 μM to k_d = 0.06 μM) when protein is attached to liposome compared to attached to a rigid surface. The results might provide better understanding and pave the way for the future design of the ligand-targeted liposomes.

CD58 Immunobiology at a Glance

The glycoprotein CD58, also known as lymphocyte-function antigen 3 (LFA-3), is a costimulatory receptor distributed on a broad range of human tissue cells. Its natural ligand CD2 is primarily expressed on the surface of T/NK cells. The CD2-CD58 interaction is an important component of the immunological synapse (IS) that induces activation and proliferation of T/NK cells and triggers a series of intracellular signaling in T/NK cells and target cells, respectively, in addition to promoting cell adhesion and recognition. Furthermore, a soluble form of CD58 (sCD58) is also present in cellular supernatant in vitro and in local tissues in vivo. The sCD58 is involved in T/NK cell-mediated immune responses as an immunosuppressive factor by affecting CD2-CD58 interaction. Altered accumulation of sCD58 may lead to immunosuppression of T/NK cells in the tumor microenvironment, allowing sCD58 as a novel immunotherapeutic target. Recently, the crucial roles of costimulatory molecule CD58 in immunomodulation seem to be reattracting the interests of investigators. In particular, the CD2-CD58 interaction is involved in the regulation of antiviral responses, inflammatory responses in autoimmune diseases, immune rejection of transplantation, and immune evasion of tumor cells. In this review, we provide a comprehensive summary of CD58 immunobiology.

Biomimetic hybrid membranes: incorporation of transport proteins/peptides into polymer supports

Molecular sensing, water purification and desalination, drug delivery, and DNA sequencing are some striking applications of biomimetic hybrid membranes. These devices take advantage of biomolecules, which have gained excellence in their specificity and efficiency during billions of years, and of artificial materials that load the purified biological molecules and provide technological properties, such as robustness, scalability, and suitable nanofeatures to confine the biomolecules. Recent methodological advances allow more precise control of polymer membranes that support the biomacromolecules, and are expected to improve the design of the next generation of membranes as well as their applicability. In the first section of this review we explain the biological relevance of membranes, membrane proteins, and the classification used for the latter. After this, we critically analyse the different approaches employed for the production of highly selective hybrid membranes, focusing on novel materials made of self-assembled block copolymers and nanostructured polymers. Finally, a summary of the advantages and disadvantages of the different methodologies is presented and the main characteristics of biomimetic hybrid membranes are highlighted.

About Chemical Strategies to Fabricate Cell-Instructive Biointerfaces with Static and Dynamic Complexity

Properly functioning cell-instructive biointerfaces are critical for healthy integration of biomedical devices in the body and serve as decisive tools for the advancement of our understanding of fundamental cell biological phenomena. Studies are reviewed that use covalent chemistries to fabricate cell-instructive biointerfaces. These types of biointerfaces typically result in a static presentation of predefined cell-instructive cues. Chemically defined, but dynamic cell-instructive biointerfaces introduce spatiotemporal control over cell-instructive cues and present another type of biointerface, which promises a more biomimetic way to guide cell behavior. Therefore, strategies that offer control over the lateral sorting of ligands, the availability and molecular structure of bioactive ligands, and strategies that offer the ability to induce physical, chemical and mechanical changes in situ are reviewed. Specific attention is paid to state-of-the-art studies on dynamic, cell-instructive 3D materials. Future work is expected to further deepen our understanding of molecular and cellular biological processes investigating cell-type specific responses and the translational steps toward targeted in vivo applications.

Early activation of CD95 is limited and localized to the cytotoxic synapse

The cytotoxic synapse formed between cytotoxic T lymphocytes or natural killer cells expressing CD95L and target cells with CD95 on their surface is a key pathway for apoptosis induction by the immune system. Despite similarities with the immune synapse in antigen presenting cells, little is known about the role of the spatiotemporal organization of agonistic proteins/receptor interactions for CD95 signaling. Here, we have developed an artificial cytotoxic synapse to examine how mobility and geometry of an anti-CD95 agonistic antibody affect receptor aggregation and mobility, ie the first step of receptor activation. By measuring the distribution, diffusion coefficient, and fraction of immobile CD95 receptor in living cells, we show that at short times, the initial activation of CD95 occurs locally and is limited to the contact region of the cytotoxic synapse. This anisotropic activation of apoptotic signaling supports a role for confined interactions on the efficiency of signal transduction that may have implications for biomedical applications of extrinsic apoptosis induction.

Guiding hMSC Adhesion and Differentiation on Supported Lipid Bilayers

Mesenchymal stem cells (MSCs) are intensively investigated for regenerative medicine applications due to their ease of isolation and multilineage differentiation capacity. Hence, designing instructive microenvironments to guide MSC behavior is important for the generation of smart interfaces to enhance biomaterial performance in guiding desired tissue formation. Supported lipid bilayers (SLBs) as cell membrane mimetics can be employed as biological interfaces with easily tunable characteristics such as biospecificity, mobility, and density of predesigned ligand molecules. Arg-Gly-Asp (RGD) ligand functionalized SLBs are explored for guiding human MSC (hMSC) adhesion and differentiation by studying the effect of changes in ligand density and mobility. Cellular and molecular analyses show that adhesion occurs through specific interactions with RGD ligands where the extent is positively correlated to changes in ligand density. Furthermore, cell area is significantly regulated by ligand density on ligand-mobile SLBs when compared to ligand-immobile SLBs. Finally, the osteogenic differentiation capacity of hMSCs is positively correlated to ligand density on ligand-mobile SLBs indicating that regulation of cell spreading is linked to cell differentiation capacity. These results demonstrate that hMSC behavior can be directed on SLBs by molecular design and presents SLBs as versatile platforms for future engineering of smart biomaterial coatings.

One-Photon Lithography for High-Quality Lipid Bilayer Micropatterns

A relevant question in cell biology with broad implications in biomedicine is how the organization and dynamics of interacting membranes modulate signaling cascades that involve cell-cell contact. The functionalization of surfaces with supported lipid bilayers containing tethered proteins is a particularly useful method to present ligands with membrane-like mobility to cells. Here, we present a method to generate micrometer-sized patches of lipid bilayers decorated with proteins. The method uses an economic microcontact printing technique based on one-photon lithography that can be easily implemented in a commercial laser scanning microscope. We verified that both proteins and lipids freely diffuse within the patterned bilayer, as assessed by z-scan fluorescence correlation spectroscopy and fluorescence recovery after photobleaching. These results suggest that the supported lipid bilayer patterns constitute an optimal system to explore processes involving direct interactions between cells. We also illustrate possible applications of this method by exploring the interaction of cells expressing the Fas receptor and patterns of lipid bilayers containing an agonist antibody against Fas.

Imaging of molecular surface dynamics in brain slices using single-particle tracking

Organization of signalling molecules in biological membranes is crucial for cellular communication. Many receptors, ion channels and cell adhesion molecules are associated with proteins important for their trafficking, surface localization or function. These complexes are embedded in a lipid environment of varying composition. Binding affinities and stoichiometry of such complexes were so far experimentally accessible only in isolated systems or monolayers of cell culture. Visualization of molecular dynamics within signalling complexes and their correlation to specialized membrane compartments demand high temporal and spatial resolution and has been difficult to demonstrate in complex tissue like brain slices. Here we demonstrate the feasibility of single-particle tracking (SPT) in organotypic brain slices to measure molecular dynamics of lipids and transmembrane proteins in correlation to synaptic membrane compartments. This method will provide important information about the dynamics and organization of surface molecules in the complex environment of neuronal networks within brain slices.

Lateral diffusion of transmembrane signalling molecules is implicated in neuronal communication but imaging in tissue is limited by poor temporal resolution. Here, the authors use quantum dots to label lipids and adhesion molecules, allowing them to track single-molecule motions in subcellular compartments.

Biomimetic particles as therapeutics

In recent years, there have been major advances in the development of novel nanoparticle- and microparticle-based therapeutics. An emerging paradigm is the incorporation of biomimetic features into these synthetic therapeutic constructs to enable them to better interface with biological systems. Through the control of size, shape, and material consistency, particle cores have been generated that better mimic natural cells and viruses. In addition, there have been significant advances in biomimetic surface functionalization of particles through the integration of bio-inspired artificial cell membranes and naturally derived cell membranes. Biomimetic technologies enable therapeutic particles to have increased potency to benefit human health.

Light and life in Baltimore--and beyond

Baltimore has been the home of numerous biophysical studies using light to probe cells. One such study, quantitative measurement of lateral diffusion of rhodopsin, set the standard for experiments in which recovery after photobleaching is used to measure lateral diffusion. Development of this method from specialized microscopes to commercial scanning confocal microscopes has led to widespread use of the technique to measure lateral diffusion of membrane proteins and lipids, and as well diffusion and binding interactions in cell organelles and cytoplasm. Perturbation of equilibrium distributions by photobleaching has also been developed into a robust method to image molecular proximity in terms of fluorescence resonance energy transfer between donor and acceptor fluorophores.

Ligand-mediated friction determines morphodynamics of spreading T cells

Spreading of T cells on antigen presenting cells is a crucial initial step in immune response. Spreading occurs through rapid morphological changes concomitant with the reorganization of surface receptors and of the cytoskeleton. Ligand mobility and frictional coupling of receptors to the cytoskeleton were separately recognized as important factors but a systematic study to explore their biophysical role in spreading was hitherto missing. To explore the impact of ligand mobility, we prepared chemically identical substrates on which molecules of anti-CD3 (capable of binding and activating the T cell receptor complex), were either immobilized or able to diffuse. We quantified the T cell spreading area and cell edge dynamics using quantitative reflection interference contrast microscopy, and imaged the actin distribution. On mobile ligands, as compared to fixed ligands, the cells spread much less, the actin is centrally, rather than peripherally distributed and the edge dynamics is largely altered. Blocking myosin-II or adding molecules of ICAM1 on the substrate largely abrogates these differences. We explain these observations by building a model based on the balance of forces between activation-dependent actin polymerization and actomyosin-generated tension on one hand, and on the frictional coupling of the ligand-receptor complexes with the actin cytoskeleton, the membrane and the substrate, on the other hand. Introducing the measured edge velocities in the model, we estimate the coefficient of frictional coupling between T Cell receptors or LFA-1 and the actin cytoskeleton. Our results provide for the first time, to our knowledge, a quantitative framework bridging T cell-specific biology with concepts developed for integrin-based mechanisms of spreading.

Single particle tracking with sterol modulation reveals the cholesterol-mediated diffusion properties of integrin receptors

A combination of sterol modulation with cyclodextrins plus fluorescence microscopy revealed a biophysical mechanism behind cholesterol's influence on the diffusion of a ubiquitous class of receptors called integrins. The heterogeneous diffusion of integrins bound to ligand-coated quantum dots was measured using single particle tracking (SPT), and the ensemble changes in integrin diffusion were measured by fluorescence recovery after photobleaching (FRAP). A 25 ± 1% reduction of membrane cholesterol resulted in three significant changes to the diffusion of ligand-bound αPS2CβPS integrins as measured by SPT. There was a 23% increase in ligand-bound mobile integrins; there was a statistically significant increase in the average diffusion coefficient inside zones of confined diffusion, and histograms of confined integrin trajectories showed an increased frequency in the range of 0.1-1 μm(2) s(-1) and a decreased frequency in the 0.001-0.1 μm(2) s(-1) range. No statistical change was measured in the duration of confinement nor the size of confined zones. Restoring the cholesterol-depleted cells with exogenous cholesterol or exogenous epicholesterol resulted in similar diffusion properties. Epicholesterol differs from cholesterol in the orientation of a single hydroxyl group. The ability of epicholesterol to substitute for cholesterol suggests a biophysical mechanism for cholesterol's effect on integrin diffusion. Influences of bilayer thickness, viscosity and organization are discussed as possible explanations for the measured changes in integrin diffusion when the membrane cholesterol concentration is reduced.

Molecularly engineered surfaces for cell biology: from static to dynamic surfaces

Surfaces with a well-defined presentation of ligands for receptors on the cell membrane can serve as models of the extracellular matrix for studying cell adhesion or as model cell surfaces for exploring cell-cell contacts. Because such surfaces can provide exquisite control over, for example, the density of these ligands or when the ligands are presented to the cell, they provide a very precise strategy for understanding the mechanisms by which cells respond to external adhesive cues. In the present feature article, we present an overview of the basic biology of cell adhesion before discussing surfaces that have a static presentation of immobile ligands. We outline the biological information that such surfaces have given us, before progressing to recently developed switchable surfaces and surfaces that mimic the lipid bilayer, having adhesive ligands that can move around the membrane and be remodeled by the cell. Finally, the feature article closes with some of the biological information that these new types of surfaces could provide.

Micropatterned, multicomponent supported lipid bilayers for cellular systems

Lipid bilayer membranes are a central structural feature of living cells, providing a wide range of functions including partitioning of organelles, mediating cell interaction with the environment, and modulating intracellular signaling processes. By capturing the fluidity of the natural membranes in a reductionist in vitro model, substrate supported lipid bilayers have emerged as a compelling model system for these structures. Furthermore, the ability to control the composition and mobility of this system at micro- and nanoscales inspired several new routes of biological and biotechnological investigation. Here, we describe key methods used to create multicomponent lipid bilayers, discuss design considerations important to making these systems, and demonstrate this process in the specific context of understanding juxtacrine cell signaling. Different fabrication techniques were combined to first pattern a surface with barriers to lipid diffusion and then spatially control the exposure of this surface to lipid vesicles, leading to local formation of bilayers of different composition. This multicomponent system was used as a platform for to mimic the natural organization of T cells and antigen presenting cells by presenting ligands to the T cell receptor and lymphocyte function-associated antigen-1 that are tethered to separate, closely juxtaposed regions of bilayer. Other technologies like using photochemical polymerization of lipids to pattern bilayers have also been discussed. The information gathered from evaluating membrane interactions in patterned lipid bilayers may lead to the development of membrane-based biomedical devices for conducting novel cell-based assays and potentially high-throughput drug screens targeting membranes or membrane-associated components.

Defined DNA-mediated assemblies of gene-expressing giant unilamellar vesicles

The technological aspects of artificial vesicles as prominent cell mimics are evolving toward higher-order assemblies of functional vesicles with tissuelike architectures. Here, we demonstrate the spatially controlled DNA-directed bottom-up synthesis of complex microassemblies and macroassemblies of giant unilamellar vesicles functionalized with a basic cellular machinery to express green fluorescent protein and specified neighbor-to-neighbor interactions. We show both that the local and programmable DNA pairing rules on the nanoscale are able to direct the microscale vesicles into macroscale soft matter assemblies and that the highly sensitive gene-expression machinery remains intact and active during multiple experimental steps. An in silico model recapitulates the experiments performed in vitro and covers additional experimental setups highlighting the parameters that control the DNA-directed bottom-up synthesis of higher-order self-assembled structures. The controlled assembly of a functional vesicle matrix may be useful not only as simplified natural tissue mimics but also as artificial scaffolds that could interact and support living cells.

DNA-based patterning of tethered membrane patches

Solid-supported lipid bilayers are useful model systems for mimicking cellular membranes; however, the interaction of the bilayer with the surface can disrupt the function of integral membrane proteins and impede topological transformations such as membrane fusion. As a result, a variety of tethered or cushioned lipid bilayer architectures have been described, which retain the proximity to the surface, enabling surface-sensitive techniques, but physically distance the bilayer from the surface. We have recently developed a method for spatially separating a lipid bilayer from a solid support using DNA lipids. In this system, a DNA strand is covalently attached to a glass slide or SiO2 wafer, and giant unilamellar vesicles (GUVs) displaying the complement rupture to form a planar lipid bilayer tethered above the surface. However, the location of the patch is random, determined by where the DNA-GUV initially binds to its complement. To allow greater versatility and control, we sought a way to pattern tethered membrane patches. We present a method for creating spatially distinct tethered membrane patches on a glass slide using microarray printing. Surface-reactive DNA sequences are spotted onto the slide, incubated to covalently link the DNA to the surface, and DNA-GUVs patches are formed selectively on the printed DNA. By interfacing the bilayers with microfluidic flow cells, materials can be added on top of or fused into the membrane to change the composition of the bilayers. With further development, this approach would enable rapid screening of different patches in protein binding assays and would enable interfacing patches with electrical detectors.

Biophysical description of multiple events contributing blood leukocyte arrest on endothelium

Blood leukocytes have a remarkable capacity to bind to and stop on specific blood vessel areas. Many studies have disclosed a key role of integrin structural changes following the interaction of rolling leukocytes with surface-bound chemoattractants. However, the functional significance of structural data and mechanisms of cell arrest are incompletely understood. Recent experiments revealed the unexpected complexity of several key steps of cell-surface interaction: (i) ligand-receptor binding requires a minimum amount of time to proceed and this is influenced by forces. (ii) Also, molecular interactions at interfaces are not fully accounted for by the interaction properties of soluble molecules. (iii) Cell arrest depends on nanoscale topography and mechanical properties of the cell membrane, and these properties are highly dynamic. Here, we summarize these results and we discuss their relevance to recent functional studies of integrin-receptor association in cells from a patient with type III leukocyte adhesion deficiency. It is concluded that an accurate understanding of all physical events listed in this review is needed to unravel the precise role of the multiple molecules and biochemical pathway involved in arrest triggering.

A spatial model for integrin clustering as a result of feedback between integrin activation and integrin binding

Integrins are transmembrane adhesion receptors that bind extracellular matrix (ECM) proteins and signal bidirectionally to regulate cell adhesion and migration. In many cell types, integrins cluster at cell-ECM contacts to create the foundation for adhesion complexes that transfer force between the cell and the ECM. Even though the temporal and spatial regulation of these integrin clusters is essential for cell migration, how cells regulate their formation is currently unknown. It has been shown that integrin cluster formation is independent of actin stress fiber formation, but requires active (high-affinity) integrins, phosphoinositol-4,5-bisphosphate (PIP2), talin, and immobile ECM ligand. Based on these observations, we propose a minimal model for initial formation of integrin clusters, facilitated by localized activation and binding of integrins to ECM ligands as a result of biochemical feedback between integrin binding and integrin activation. By employing a diffusion-reaction framework for modeling these reactions, we show how spatial organization of bound integrins into clusters may be achieved by a local source of active integrins, namely protein complexes formed on the cytoplasmic tails of bound integrins. Further, we show how such a mechanism can turn small local increases in the concentration of active talin or active integrin into integrin clusters via positive feedback. Our results suggest that the formation of integrin clusters by the proposed mechanism depends on the relationships between production and diffusion of integrin-activating species, and that changes to the relative rates of these processes may affect the resulting properties of integrin clusters.

On the roles of polyvalent binding in immune recognition: perspectives in the nanoscience of immunology and the immune response to nanomedicines

Immunology often conveys the image of large molecules, either in the soluble state or in the membrane of leukocytes, forming multiple contacts with a target for actions of the immune system. Avidity names the ability of a polyvalent molecule to form multiple connections of the same kind with ligands tethered to the same surface. Polyvalent interactions are vastly stronger than their monovalent equivalent. In the present review, the functional consequences of polyvalent interactions are explored in a perspective of recent theoretical advances in understanding the thermodynamics of such binding. From insights on the structural biology of soluble pattern recognition molecules as well as adhesion molecules in the cell membranes or in their proteolytically shed form, this review documents the prominent role of polyvalent interactions in making the immune system a formidable barrier to microbial infection as well as constituting a significant challenge to the application of nanomedicines.

Protein microarrays, biosensors, and cell-based methods for secretome-wide extracellular protein-protein interaction mapping

Approximately one quarter of all human genes encode proteins that function in the extracellular space or serve to bridge the extracellular and intracellular environments. Physical associations between these secretome proteins serve to regulate a wide range of biological activities and consequently represent important therapeutic targets. Moreover, some extracellular proteins are targeted by pathogens to allow host access or immune evasion. Despite the importance of extracellular protein-protein interactions, our knowledge in this area has remained sparse. Weak affinities and low abundance have often hindered efforts to identify these interactions using traditional methods such as biochemical purification and cDNA library expression cloning. Moreover, current large-scale protein-protein interaction mapping techniques largely under represent extracellular protein-protein interactions. This review highlights emerging biosensor and protein microarray technology, along with more traditional cell-based techniques, that are compatible with secretome-wide screens for extracellular protein-protein interaction discovery. A combination of these approaches will serve to rapidly expand our knowledge of the extracellular protein-protein interactome.

Surface traffic in synaptic membranes

The precision of signal transmission in chemical synapses is highly dependent on the structural alignment between pre- and postsynaptic components. The thermal agitation of transmembrane signaling molecules by surrounding lipid molecules and activity-driven changes in the local protein interaction affinities indicate a dynamic molecular traffic of molecules within synapses. The observation of local protein surface dynamics starts to be a useful tool to determine the contribution of intracellular and extracellular structures in organizing a plastic synapse. Local rearrangements by lateral diffusion in the synaptic and perisynaptic membrane induce fast density changes of signaling molecules and enable the synapse to change efficacy in short time scales. The degree of lateral mobility is restricted by many passive and active interactions inside and outside the membrane. AMPAR at the glutamatergic synapse are the best explored receptors in this respect and reviewed here as an example molecule. In addition, transsynaptic adhesion molecule complexes also appear highly dynamically in the synapse and do further support the importance of local surface traffic in subcellular compartments like synapses.

Nanoengineering of Immune Cell Function

T lymphocytes are a key regulatory component of the adaptive immune system. Understanding how the micro- and nano-scale details of the extracellular environment influence T cell activation may have wide impact on the use of T cells for therapeutic purposes. In this article, we examine how the micro- and nano-scale presentation of ligands to cell surface receptors, including microscale organization and nanoscale mobility, influences the activation of T cells. We extend these studies to include the role of cell-generated forces, and the rigidity of the microenvironment, on T cell activation. These approaches enable delivery of defined signals to T cells, a step toward understanding the cell-cell communication in the immune system, and developing micro/nano- and material- engineered systems for tailoring immune responses for adoptive T cell therapies.

Concentration dependence of lipopolymer self-diffusion in supported bilayer membranes

Self-diffusion coefficients of poly(ethylene glycol)2k-derivatized lipids (DSPE-PEG2k-CF) in glass-supported DOPC phospholipid bilayers are ascertained from quantitative fluorescence recovery after photobleaching (FRAP). We developed a first-order reaction-diffusion model to ascertain the bleaching constant, mobile fraction and lipopolymer self-diffusion coefficient D(s) at concentrations in the range c ≈ 0.5-5 mol%. In contrast to control experiments with 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine-N-(7-nitro-2-1,3-benzoxadiazol-4-yl) (ammonium salt) (DOPE-NBD) in 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), the lipopolymer self-diffusion coefficient decreases monotonically with increasing concentration, without a distinguishing mushroom-to-brush transition. Our data yield a correlation D(s) = D(0)/(1 + αc), where D(0) ≈ 3.36 µm(2) s(-1) and α ≈ 0.56 (with c expressed as a mole percent). Interpreting the dilute limit with the Scalettar-Abney-Owicki statistical mechanical theory for transmembrane proteins yields an effective disc radius a(e) ≈ 2.41 nm. On the other hand, the Bussell-Koch-Hammer theory, which includes hydrodynamic interactions, yields a(e) ≈ 2.92 nm. As expected, both measures are smaller than the Flory radius of the 2 kDa poly(ethylene glycol) (PEG) chains, R(F) ≈ 3.83 nm, and significantly larger than the nominal radius of the phospholipid heads, a(l) ≈ 0.46 nm. The diffusion coefficient at infinite dilution D(0) was interpreted using the Evans-Sackmann theory, furnishing an inter-leaflet frictional drag coefficient b(s) ≈ 1.33 × 10(8) N s m(-3). Our results suggest that lipopolymer interactions are dominated by the excluded volume of the PEG-chain segments, with frictional drag dominated by the two-dimensional bilayer hydrodynamics.

An expression system for screening of proteins for glycan and protein interactions

Here we describe a versatile high-throughput expression system that permits genome-wide screening of type 1 membrane and secreted proteins for interactions with glycans and proteins using both cell-expressed and soluble forms of the expressed proteins. Based on Gateway cloning methodology, we have engineered a destination vector that directs expression of enhanced green fluorescent protein (EGFP)-tagged proteins at the cell surface via a glycosylphosphatidylinositol tail. The EGFP fusion proteins can then be cleaved with PreScission protease to release soluble forms of proteins that can be optionally biotinylated. We demonstrate the utility of this cloning and expression system for selected low-affinity membrane lectins from the siglec family of sialic acid-binding immunoglobulin-like lectins, for the glycosaminoglycan-binding proteins FGF-1 and BACE, and for the heterotypic adhesion molecules JAM-B and JAM-C. Cell-expressed proteins can be evaluated for glycan interactions using polyvalent soluble glycan probes and for protein interactions using either cells or soluble proteins. Following cleavage from the cell surface, proteins were complexed in solution and sufficient avidity was achieved to measure weak protein–glycan and weak protein–protein interactions using glycan arrays and surface plasmon resonance, respectively.

Novel cellular microarray assay for profiling T-cell peptide antigen specificities

We present a novel cellular microarray assay using soluble peptide-loaded HLA A2-Ig dimer complexes that optimizes the avidity of peptide-HLA binding by preserving the molecular flexibility of the dimer complex while attaining much higher concentrations of the complex relative to cognate T-cell receptors. A seminal advance in assay development is made by separating the molecular T-cell receptor recognition event from the binding interactions that lead to antigen-specific cell capture on the microarray. This advance enables the quantitative determination of antigen-specific frequencies in heterogeneous T-cell populations without enumerating the number of cells captured on the microarray. The specificity of cell capture, sensitivity to low antigen-specific frequencies, and quantitation of antigenic T-cell specificities are established using CD8 T-cell populations with prepared antigen-specific CTL frequencies and heterogeneous T cells isolated from peripheral blood. The results demonstrate several advantages for high-throughput broad-based, quantitative assessments of low-frequency antigen specificities. The assay enables the use of cellular microarrays to determine the stability and flux of antigen-specific T-cell responses within and across populations.

Neural stem cell adhesion and proliferation on phospholipid bilayers functionalized with RGD peptides

Peptide-functionalized materials show promise in controlling stem cell behavior by mimicking cell-matrix interactions. Supported lipid bilayers are an excellent platform for displaying peptides due to their ease of fabrication and low non-specific interactions with cells. In this paper, we report on the behavior of adult hippocampal neural stem cells (NSCs) on phospholipid bilayers functionalized with different RGD-containing peptides: either GGGNGEPRGDTYRAY ('bsp-RGD(15)') or GRGDSP. Fluid supported bilayers were prepared on glass surfaces by adsorption and fusion of small lipid vesicles incorporating synthetic peptide amphiphiles. NSCs adhered to bilayers with either GRGDSP or bsp-RGD(15) peptide. After 5 days in culture, NSCs formed neurosphere-like aggregates on GRGDSP bilayers, whereas on bsp-RGD(15) bilayers a large fraction of single adhered cells were observed, comparable to monolayer growth seen on laminin controls. NSCs retained their ability to differentiate into neurons and astrocytes on both peptide surfaces. This work illustrates the utility of supported bilayers in displaying peptide ligands and demonstrates that RGD peptides may be useful in synthetic culture systems for stem cells.

Lipopolymer gradient diffusion in supported bilayer membranes

We measure the gradient diffusion coefficient of a model lipopolymer in supported lipid bilayer membranes from Fourier-transform post-electrophoresis relaxation. The experiments and accompanying quantitative interpretation furnish the concentration dependence of the gradient diffusion coefficient. In striking contrast to the recent measurements of the self-diffusion coefficient from fluorescence recovery after photobleaching, the lipopolymer gradient diffusion coefficient increases with concentration. We interpret the enhancement at small but finite concentrations using the Scalettar-Abney-Owicki (SAO) statistical mechanical theory (1988) and the Bussell-Koch-Hammer (BKH) hydrodynamic theory (1995), which are customarily adopted to model membrane protein dynamics. The SAO theory furnishes an effective disc radius and soft repulsive interaction radius that are comparable to the Flory radius of the unperturbed polyethylene glycol chains. On the other hand, the BKH theory predicts a gradient diffusion coefficient that decreases with disc/membrane protein concentration. Thus, in contrast to membrane proteins, we conclude that lipopolymer hydrodynamic interactions are weak because the principal disturbances are in the low-viscosity aqueous phase. Accordingly, lipopolymer interactions are dominated by thermodynamic interactions among polymer chains. Interestingly, our experiments suggest that increasing (decreasing) the polymer molecular weight should increase (decrease) the relaxation rate of lipopolymer concentration fluctuations.

Model lipid bilayer with facile diffusion of lipids and integral membrane proteins

A model membrane system is formed by the rupture of giant unilamellar vesicles (GUVs) onto a passivating layer comprising a PEG polymer cushion anchored in a lipid bilayer supported on glass. The novel use of pH-dependent electrostatic interactions between NeutrAvidin in the passivating layer and anionic lipids in the GUV drives vesicle rupture. The resulting "GUV pancakes" are single, planar lipid bilayer patches whose diameters vary from approximately 20 to 50 microm. The pancakes have several potential advantages for the in vitro study of protein-lipid interactions and integral membrane protein function. All components are commercially available. The pancakes resist nonspecific binding of vesicles containing protein. Both lipids and integral membrane proteins exhibit good lateral mobility in the GUV pancakes, as evidenced by single-particle tracking (SPT) of the DiD double-tailed fluorescent probe and of the integral membrane protein syntaxin-1A, labeled with AlexaFluor 633 (AF633-Syx). At least 80% of both probes exhibit free, homogeneous diffusion with a diffusion coefficient of approximately 5.5 microm(2) s(-1), which is more than 10 times faster than diffusion in a GUV pancake supported on bare glass. Atomic force microscopy (AFM) suggests that the polymer cushion has a height of approximately 4 nm. The mobility of a large fraction of the AF633-Syx probe suggests that even integral membrane proteins with large domains on both sides of the lipid bilayer should exhibit free diffusion within a GUV pancake.

DNA-mediated self-assembly of artificial vesicles

BACKGROUND

Although multicompartment systems made of single unilamellar vesicles offer the potential to outperform single compartment systems widely used in analytic, synthetic, and medical applications, their use has remained marginal to date. On the one hand, this can be attributed to the binary character of the majority of the current tethering protocols that impedes the implementation of real multicomponent or multifunctional systems. On the other hand, the few tethering protocols theoretically providing multicompartment systems composed of several distinct vesicle populations suffer from the readjustment of the vesicle formation procedure as well as from the loss of specificity of the linking mechanism over time.

METHODOLOGY/PRINCIPAL FINDINGS

In previous studies, we presented implementations of multicompartment systems and resolved the readjustment of the vesicle formation procedure as well as the loss of specificity by using linkers consisting of biotinylated DNA single strands that were anchored to phospholipid-grafted biotinylated PEG tethers via streptavidin as a connector. The systematic analysis presented herein provides evidences for the incorporation of phospholipid-grafted biotinylated PEG tethers to the vesicle membrane during vesicle formation, providing specific anchoring sites for the streptavidin loading of the vesicle membrane. Furthermore, DNA-mediated vesicle-vesicle self-assembly was found to be sequence-dependent and to depend on the presence of monovalent salts.

CONCLUSIONS/SIGNIFICANCE

This study provides a solid basis for the implementation of multi-vesicle assemblies that may affect at least three distinct domains. (i) Analysis. Starting with a minimal system, the complexity of a bottom-up system is increased gradually facilitating the understanding of the components and their interaction. (ii) Synthesis. Consecutive reactions may be implemented in networks of vesicles that outperform current single compartment bioreactors in versatility and productivity. (iii) Personalized medicine. Transport and targeting of long-lived, pharmacologically inert prodrugs and their conversion to short-lived, active drug molecules directly at the site of action may be accomplished if multi-vesicle assemblies of predefined architecture are used.

Lateral Mobility of E-cadherin Enhances Rac1 Response in Epithelial Cells

The fluidity of cellular membranes imparts lateral mobility of proteins across the cell surface. To understand the impact of lateral mobility on cell-cell communication, a protein consisting of the extracellular recognition domains of E-cadherin was associated with the surface of silica beads by either tethering to a bead-supported lipid bilayer or direct adsorption, resulting in laterally mobile and immobile presentations of this protein. These beads were then seeded onto the upper surface of MDCK cells. Functional engagement of these beads was compared by measurement of Rac1 recruitment around the bead. Lateral mobility enhanced recognition of E-cadherin, promoting cell response to the beads at lower per-area concentrations than their immobilized counterparts. A more complete understanding of how lateral mobility of membrane-associated proteins influences molecular recognition, and potentially other downstream responses, could provide new strategies for the design of materials and devices intended to capture the architecture of natural tissues.

Insights into function of the immunological synapse from studies with supported planar bilayers

Innate and adaptive immunity is dependent upon reliable cell-cell communication mediated by direct interactions of cell surface receptors with ligands integrated into the surface of apposing cells or bound directly to the surface as in complement deposition or antibody mediated recognition through Fc receptors. Supported lipid bilayers formed on glass surfaces offer a useful model system in which to explore some basic features of molecular interactions in immunological relevant contacts, which include signal integration and effector functions through immunological synapses and kinapses. We have exploited that lateral mobility of molecules in the supported planar bilayers and fluorescence microscopy to develop a system for measurement of two-dimensional affinities and kinetic rates in the contact area, which is of immunological interest. Affinity measurements are based on a modified Scatchard analysis. Measurements of kinetic rates are based on fluorescence photo bleaching after recovery at the level of the entire contact area. This has been coupled to a reaction-diffusion equation that allows calculation of on- and off-rates. We have found that mixtures of ligands in supported planar bilayers can effectively activate T lymphocytes and simultaneously allow monitoring of the immunological synapse. Recent studies in planar bilayers have provided additional insights into organization principles of cell-cell interfaces. Perennial problems in understanding cell-cell communication are yielding quantitative measurements based on planar bilayers in areas of ligand-driven receptor clustering and the role of the actin cytoskeleton in immune cell activation. A major goal for the field is determining quantitative rules involved in signaling complex formation by innate and adaptive receptor systems.

Binding-site geometry and flexibility in DC-SIGN demonstrated with surface force measurements

The dendritic cell receptor DC-SIGN mediates pathogen recognition by binding to glycans characteristic of pathogen surfaces, including those found on HIV. Clustering of carbohydrate-binding sites in the receptor tetramer is believed to be critical for targeting of pathogen glycans, but the arrangement of these sites remains poorly understood. Surface force measurements between apposed lipid bilayers displaying the extracellular domain of DC-SIGN and a neoglycolipid bearing an oligosaccharide ligand provide evidence that the receptor is in an extended conformation and that glycan docking is associated with a conformational change that repositions the carbohydrate-recognition domains during ligand binding. The results further show that the lateral mobility of membrane-bound ligands enhances the engagement of multiple carbohydrate-recognition domains in the receptor oligomer with appropriately spaced ligands. These studies highlight differences between pathogen targeting by DC-SIGN and receptors in which binding sites at fixed spacing bind to simple molecular patterns.

Supported bilayers at the vanguard of immune cell activation studies

Biological adhesion between cells is critical for development of multicellular organisms and for the function of the adaptive immune system of vertebrates. A gap in understanding of adhesion systems arises from the difficulty of collecting quantitative data on the molecular interactions underlying adhesion, which is typically studied by population statistics such as percent adhesion in the presence of empirically defined forces to separate less adherent cells. Supported lipid bilayers formed on glass surfaces offer a useful model system in which to explore some basic features of molecular interactions in adhesive contacts. We have exploited the lateral mobility of molecules in the supported planar bilayers and fluorescence microscopy to develop a system for measurement of two-dimensional affinities and kinetic rates in contact areas. Affinity measurements are based on a modified Scatchard analysis. Measurements of kinetic rates are based on fluorescence photobleaching after recovery at the level of the entire contact area. This has been coupled to a reaction-diffusion equation that allows calculation of on- and off-rates. We have found that mixtures of ligands in supported planar bilayers can effectively activate T lymphocytes and simultaneously allow monitoring of the immunological synapse. Recent studies in planar bilayers have provided additional insights into organization principles of cell-cell interfaces. Perennial problems in understanding cell-cell communication are yielding to quantitative measurements based on planar bilayers in areas of ligand driven receptor clustering and the role of the actin cytoskeleton in immune cell activation. A major goal for the field is determining quantitative rules involved in signaling complex formation.

Capturing the nanoscale complexity of cellular membranes in supported lipid bilayers

The lateral mobility of cell membranes plays an important role in cell signaling, governing the rate at which embedded proteins can interact with other biomolecules. The past two decades have seen a dramatic transformation in understanding of this environment, as the mechanisms and potential implications of nanoscale structure of these systems has become accessible to theoretical and experimental investigation. In particular, emerging micro- and nano-scale fabrication techniques have made possible the direct manipulation of model membranes at the scales relevant to these biological processes. This review focuses on recent advances in nanopatterning of supported lipid bilayers, capturing the impact of membrane nanostructure on molecular diffusion and providing a powerful platform for further investigation of the role of this spatial complexity on cell signaling.

Progress in mimetic studies of cell adhesion and the mechanosensing

Vesicle-substrate adhesion has been studied for over two decades with the motivation to understand and mimic cell adhesion. In recent years, with progress in theoretical modelling, the development of experimental techniques, and improved data-analysis procedures, considerable advances have been made in the understanding of the adhesion process. It is this progress which constitutes the focus of this review.

Signal transduction by CD58: the transmembrane isoform transmits signals outside lipid rafts independently of the GPI-anchored isoform

The adhesion molecule CD58 is natively expressed in both a glycosylphosphatidylinositol (GPI)-anchored form and a transmembrane form. We previously demonstrated that the two isoforms of CD58 are differentially distributed in the cell membrane. The GPI-linked form resides in lipid rafts while the transmembrane form resides outside lipid rafts. Following cross-linking a fraction of transmembrane CD58 redistributes to lipid rafts. It has also been demonstrated that ligand binding to CD58 induces biological functions such as cytokine production and immunoglobulin isotype switching, indicating that cell-cell interactions result in CD58-mediated signal transduction. However, the signaling pathways involved in these activation processes are poorly defined. Here we show for the first time that cross-linking of CD58 induces protein tyrosine phosphorylation of BLNK, Syk and PLCgamma, and activation of ERK and Akt/PKB. In addition, we studied how these signaling events relate to the distinct membrane localization of the two isoforms of CD58. We demonstrate that cross-linking of CD58 triggers signaling that is predominantly associated with transmembrane CD58 in nonraft microdomains. Moreover, signaling through transmembrane CD58 does not depend on coexpression of the GPI-linked isoform. Thus, despite the residence of its GPI-anchored isoform in lipid rafts and the translocation of a fraction of its transmembrane isoform to lipid rafts, CD58 signaling is triggered by the transmembrane isoform outside lipid rafts. These findings corroborate signaling outside lipid rafts, as opposed to the established notion that rafts function as essential platforms for signaling.

Effects of supported lipid monolayer fluidity on the adhesion of hematopoietic progenitor cell lines to fibronectin-derived peptide ligands for alpha5beta1 and alpha4beta1 integrins

Mimicking the in vivo stem cell niche to increase stem cell expansion will likely require the presentation of multiple ligands. Presenting ligands in fluid-supported lipid monolayers (SLMs) or bilayers (SLBs) allows for ligand diffusion to complement the arrangement of cell receptors as well as cell-mediated ligand rearrangement and clustering. Cells in tissues interact with ligands presented by other cells and the extracellular matrix (ECM), so it will likely be beneficial to present both cell-associated and ECM-derived ligands. A number of investigators have incorporated cell-membrane-associated ligands within fluid surfaces, and several groups have shown that these ligands cluster beneath the cells. However, few studies have investigated cell adhesion to ECM-derived ligands in fluid surfaces. Fibronectin is an important ECM component in many tissues, including the hematopoietic stem cell niche. We examined the adhesion of the M07e and THP-1 hematopoietic progenitor cell lines to fibronectin-derived peptide ligands for the alpha5beta1 (cyclic and linear RGD) and alpha4beta1 (cyclic LDV) integrins as well as the heparin-binding domain (HBD) presented as lipopeptides in fluid and gel SLMs. M07e cells adhered more avidly than THP-1 cells to all of the lipopeptides in fluid and gel surfaces. The adhesion of both cell lines to all peptides was less avid in fluid versus gel SLMs. Adhesion to cyclic LDV (cLDV) and cRGD was similar on gel SLMs for both cell lines. In contrast, adhesion to cLDV was less extensive than to cRGD in fluid SLMs, especially for M07e cells. Adhesion to linear RGD was less avid than to cRGD or cLDV and decreased to a greater extent in fluid SLMs. Human aortic endothelial cells adhered to cRGD in fluid SLMs and remained viable for at least 24 h but did not spread. We also showed additive THP-1 cell adhesion to cLDV and linear RGD lipopeptides presented in a fluid SLM. Although DOPC (dioleoyl phosphatidyl choline) SLMs are not sufficiently stable for long-term cell culture studies, our results and those of others suggest that fluid SLMs are likely to be useful for presenting multiple ligands and for mimicking short-term interactions in the stem cell niche.

Diffusion and intermembrane distance: case study of avidin and E-cadherin mediated adhesion

We present a biomimetic model system for cell-cell adhesion consisting of a giant unilamellar vesicle (GUV) adhering via specific ligand-receptor interactions to a supported lipid bilayer (SLB). The modification of in-plane diffusion of tracer lipids and receptors in the SLB membrane due to adhesion to the GUV is reported. Adhesion was mediated by either biotin-neutravidin (an avidin analogue) or the extracellular domains of the cell adhesion molecule E-cadherin (Ecad). In the strong interaction (biotin-avidin) case, binding of soluble receptors to the SLB alone led to reduced diffusion of tracer lipids. From theoretical considerations, this could be attributed partially to introduction of obstacles and partially to viscous effects. Further specific binding of a GUV membrane caused additional slowing down of tracers (up to 15%) and immobilization of receptors, and led to accumulation of receptors in the adhesion zone until full coverage was achieved. The intermembrane distance was measured to be 7 nm from microinterferometry (RICM). We show that a crowding effect due to the accumulated receptors alone is not sufficient to account for the slowing downan additional friction from the membrane also plays a role. In the weak binding case (Ecad), the intermembrane distance was about 50 nm, corresponding to partial overlap of the Ecad domains. No significant change in diffusion of tracer lipids was observed upon either protein binding or subsequent vesicle binding. The former was probably due to very small effective size of the obstacles introduced into the bilayer by Ecad binding, whereas the latter was due to the fact that, with such high intermembrane distance, the resulting friction is negligible. We conclude that the effect of intermembrane adhesion on diffusion depends strongly on the choice of the receptors.

Polymerized lipid bilayers on a solid substrate: morphologies and obstruction of lateral diffusion

Substrate supported planar lipid bilayers (SPBs) are versatile models of the biological membrane in biophysical studies and biomedical applications. We previously developed a methodology for generating SPBs composed of polymeric and fluid phospholipid bilayers by using a photopolymerizable diacetylene phospholipid (DiynePC). Polymeric bilayers could be generated with micropatterns by conventional photolithography, and the degree of polymerization could be controlled by modulating UV irradiation doses. After removing nonreacted monomers, fluid lipid membranes could be integrated with polymeric bilayers. Herein, we report on a quantitative study of the morphology of polymeric bilayer domains and their obstruction toward lateral diffusion of membrane-associated molecules. Atomic force microscopy (AFM) observations revealed that polymerized DiynePC bilayers were formed as nanometer-sized domains. The ratio of polymeric and fluid bilayers could be modulated quantitatively by changing the UV irradiation dose for photopolymerization. Lateral diffusion coefficients of lipid molecules in fluid bilayers were measured by fluorescence recovery after photobleaching (FRAP) and correlated with the amount of polymeric bilayer domains on the substrate. Controlled domain structures, lipid compositions, and lateral mobility in the model membranes should allow us to fabricate model membranes that mimic complex features of biological membranes with well-defined structures and physicochemical properties.

Multiscale analysis of T cell activation: correlating in vitro and in vivo analysis of the immunological synapse

Recently implemented fluorescence imaging techniques, such as total internal reflection fluorescence microscopy and two-photon laser scanning microscopy, have made possible multiscale analysis of the immune response from single molecules in an interface to cells moving in lymphoid tissues and tumors. In this review, we consider components of T cell sensitivity: the immunological synapse, the coordination of migration, and antigen recognition in vivo. Potency, dose, and detection threshold for peptide-MHC determine T cell sensitivity. The immunological synapse incorporates T cell receptor microclusters that initiate and sustain signaling, and it also determines the positional stability of the T cells through symmetry and symmetry breaking. In vivo decisions by T cells on stopping or migration are based on antigen stop signals and environmental go signals that can sometimes prevent arrest of T cells altogether, and thus can change the outcome of antigen encounters.