Comparative study of plant responses to carbon-based nanomaterials with different morphologies

Carbon nanomaterials are a superior soil amendment for sandy soils than biochar based on impacts on lettuce growth, physiology and soil biochemical quality

A significant bottleneck of current agricultural systems remains the very low agronomic efficiency of conventional agrochemicals, particularly in sandy soils. Carbon nanomaterials (CNMs) have been proposed to address this inefficiency in sandy soils, which could potentially improve soil fertility and enhance crop growth and physiological processes. However, the effects of different rates of CNMs on crop physiological and soil biochemical quality in sandy soils must be compared to other carbon sources (e.g., biochar) before CNMs can be broadly used. To address this, a 70-day pot experiment was set up, growing lettuce under ten treatments: a negative control with no CNMs, biochar or fertilizer; a fertilizer-only control; three CNMs-only unfertilized treatments (CNMs at 200, 400 and 800 mg kg-1 soil); two biochar treatments with fertilizer (biochar at 0.5% and 1% by soil mass + fertilizer); and three CNMs treatments with fertilizer (CNMs at 200, 400 and 800 mg kg-1 soil + fertilizer). A novel amorphous, water-dispersible, and carboxyl-functionalized CNMs with pH of 5.5, zeta potential of -40.6 mV and primary particle diameter of 30-60 nm was used for this experiment. Compared to the fertilizer-only control, CNMs applied at low to medium levels (200-400 mg kg-1) significantly increased lettuce shoot biomass (20-21%), total chlorophyll (23-27%), and fluorescence and photosynthetic activities (4-10%), which was associated with greater soil nutrient availability (N: 24-58%, K: 68-111%) and higher leaf tissue accumulation (N: 25-27%; K: 66%). Low to medium levels of CNMs also significantly increased soil biochemical properties, such as higher soil microbial biomass carbon (27-29%) and urease enzyme activity (34-44%) relative to fertilizer-only applications. In contrast, biochar (0.5%) increased lettuce biomass relative to fertilizer-only but had no significant effect on soil fertility and biological properties. These results suggest that CNMs at low to medium application rates are a superior carbon-based amendment relative to biochar in sandy soils.

Recent advances in green carbon dots (2015-2022): synthesis, metal ion sensing, and biological applications

Carbon dots (CDs) show extensive potential in various fields such as sensing, bioimaging, catalysis, medicine, optoelectronics, and drug delivery due to their unique properties, that is, low cytotoxicity, cytocompatibility, water-solubility, multicolor wavelength tuned emission, photo-stability, easy modification, strong chemical inertness, etc. This review article especially focuses on the recent advancement (2015-2022) in the green synthesis of CDs, their application in metal ions sensing and microbial bioimaging, detection, and viability studies as well as their applications in pathogenic control and plant growth promotion.

Comprehensive Risk Assessment of Carbon Nanotubes Used for Agricultural Applications

Carbon-based nanomaterials (CBNs) are often used for potential agricultural applications. Since CBNs applied to plants can easily enter plant organs and reach the human diet, the consequences of the introduction of CBNs into the food chain need to be investigated. We created a platform for a comprehensive investigation of the possible health risks of multiwalled carbon nanotubes (CNTs) accumulated in the organs of exposed tomato plants. Quantification and visualization of CNTs absorbed by plant organs were determined by microwave-induced heating (MIH) and radio frequency (RF) heating methods. Feeding mice with CNT-contaminated tomatoes showed an absence of toxicity for all assessed animal organs. The amount of CNTs accumulated inside the organs of mice fed with CNT-containing fruits was assessed by an RF heating technique and was found to be negligible. Our work provides the experimental evidence that the amount of CNTs accumulated in plant organs as a result of nanofertilization is not sufficient to induce toxicity in mice.

Carbon nanostructures: a comprehensive review of potential applications and toxic effects

There is no doubt that nanotechnology has revolutionized our life since the 1970s when it was first introduced. Nanomaterials have helped us to improve the current products and services we use. Among the different types of nanomaterials, the application of carbon-based nanomaterials in every aspect of our lives has rapidly grown over recent decades. This review discusses recent advances of those applications in distinct categories, including medical, industrial, and environmental applications. The first main section introduces nanomaterials, especially carbon-based nanomaterials. In the first section, we discussed medical applications, including medical biosensors, drug and gene delivery, cell and tissue labeling and imaging, tissue engineering, and the fight against bacterial and fungal infections. The next section discusses industrial applications, including agriculture, plastic, electronic, energy, and food industries. In addition, the environmental applications, including detection of air and water pollutions and removal of environmental pollutants, were vastly reviewed in the last section. In the conclusion section, we discussed challenges and future perspectives.

Effect of Qiangdi 863 Nanosynergids Treated Water, Nitrogen, Phosphorous and Potassium Fertilizers on Rice Growth Physiology and Grain Quality

Nanotechnology is an emerging technique that helps in solving the biotic and abiotic agricultural issues leading to enhance crop productivity. Therefore, it was hypothesized to check the effect of Qiangdi 863 nano synergids biological-assisted growth apparatus and nitrogen, phosphorous, and potassium (NPK) fertilizers improving rice germination, early growth, physiology, and yield. An experiment was performed on five rice varieties for three consecutive years (2017-2019). The nanosynergids-treated water (NTW) significantly improved the speed of germination (25.3, 35.6, and 32.3%), final emergence percentage (100%) and seed emergence energy percentage (80, 95, and 90%), radical (1.25, 1.7, and 2.35 cm) and plumule growth (1.29, 1.24, and 1.66 cm), soil plant analysis development (46, 45, and 47), antioxidant enzymatic activities, such as catalase activity (34,376 μg-1FW h-1, 33,264 μg-1FW h-1, and 34,453 μg-1F W h-1), superoxide dismutase (18,456 μg-1F W h-1, 19,445 μg-1F W h-1, and 19,954 μg-1F W h-1), peroxide (745 Ug-1F W, 734 Ug-1F W, and 752 Ug-1F W), production and declined malondialdehyde (4.5 μmolg-1F W, 5.1 μmolg-1F W, and 4.2 μmolg-1F W) for all years respectively in KSK 133. The application of nano-treated irrigated water enriched the biomass of rice seedlings. The overall nano synergid treatments successfully enhanced the endogenous hormones as salicylic acid (6,016.27 p mol/L, 5823.22 p mol/L, and 5922.12 p mol/L), jasmonates (JA) (5,175.6 p mol/L, 4231 p mol/L, and 5014.21 p mol/L) brassinosteroids (BR) (618.2 p mol/L, 546.83 p mol/L, and 582.1 p mol/L) quantification and yield 1000 grain weight (22.3, 22, and 23.2 g) of KSK 133. Hence, the overall results proved that NTW could effectively enhance the early growth and yield of rice varieties.

Engineering plants with carbon nanotubes: a sustainable agriculture approach

Sustainable agriculture is an important conception to meet the growing food demand of the global population. The increased need for adequate and safe food, as well as the ongoing ecological destruction associated with conventional agriculture practices are key global challenges. Nanomaterials are being developed in the agriculture sector to improve the growth and protection of crops. Among the various engineered nanomaterials, carbon nanotubes (CNTs) are one of the most promising carbon-based nanomaterials owing to their attractive physiochemical properties such as small size, high surface area, and superior mechanical and thermal strength, offering better opportunities for agriculture sector applications. This review provides basic information about CNTs, including their history; classification; and electrical, thermal, and mechanical properties, with a focus on their applications in the agriculture field. Furthermore, the mechanisms of the uptake and translocation of CNTs in plants and their defense mechanisms against environmental stresses are discussed. Finally, the major shortcomings, threats, and challenges of CNTs are assessed to provide a broad and clear view of the potential and future directions for CNT-based agriculture applications to achieve the goal of sustainability.

Interactive effects of metals and carbon nanotubes in a microcosm agrosystem

Agricultural soils are exposed to multiple contaminants through the use of agrochemicals or sewage sludge, introducing metals, nanomaterials and others. Among nanomaterials, carbon nanotubes (CNTs) are known for their large surface area and adsorption capabilities, possibly modifying other element behavior. However, to date, very little is known about the impacts of such interactions in agrosystems. In this study, we aimed at understanding the transfer and toxicity of contaminants (Cd, Pb, Zn and CNTs) in microcosms including native soil bacteria, earthworms and lettuce. After a 6 week exposure, no effect of the addition of CNTs to metal contaminated soils was detected on bacterial concentration or earthworm growth. However, in lettuce, an interactive effect between CNTs and metals was highlighted: in the soil containing the highest metal concentrations the addition of 0.1 mg kg^-1 CNTs led to a biomass loss (-22%) and a flavonoid concentration increase (+27%). In parallel, the addition of CNTs led to differential impacts on elemental uptake in lettuce leaves possibly related to the soil organic matter content. For earthworms, the addition of 10 mg kg^-1 CNTs resulted in an increased body elemental transfer in the soil with the higher organic matter content (Pb: + 34% and Zn: + 25%).

Nanomaterials coupled with microRNAs for alleviating plant stress: a new opening towards sustainable agriculture

Plant growth and development is influenced by their continuous interaction with the environment. Their cellular machinery is geared to make rapid changes for adjusting the morphology and physiology to withstand the stressful changes in their surroundings. The present scenario of climate change has however intensified the occurrence and duration of stress and this is getting reflected in terms of yield loss. A number of breeding and molecular strategies are being adopted to enhance the performance of plants under abiotic stress conditions. In this context, the use of nanomaterials is gaining momentum. Nanotechnology is a versatile field and its application has been demonstrated in almost all the existing fields of science. In the agriculture sector, the use of nanoparticles is still limited, even though it has been found to increase germination and growth, enhance physiological and biochemical activities and impact gene expression. In this review, we have summarized the use and role of nanomaterial and small non-coding RNAs in crop improvement while highlighting the potential of nanomaterial assisted eco-friendly delivery of small non-coding RNAs as an innovative strategy for mitigating the effect of abiotic stress.

The Effects of Graphene-Family Nanomaterials on Plant Growth: A Review

Numerous reports of graphene-family nanomaterials (GFNs) promoting plant growth have opened up a wide range of promising potential applications in agroforestry. However, several toxicity studies have raised growing concerns about the biosafety of GFNs. Although these studies have provided clues about the role of GFNs from different perspectives (such as plant physiology, biochemistry, cytology, and molecular biology), the mechanisms by which GFNs affect plant growth remain poorly understood. In particular, a systematic collection of data regarding differentially expressed genes in response to GFN treatment has not been conducted. We summarize here the fate and biological effects of GFNs in plants. We propose that soil environments may be conducive to the positive effects of GFNs but may be detrimental to the absorption of GFNs. Alterations in plant physiology, biochemistry, cytological structure, and gene expression in response to GFN treatment are discussed. Coincidentally, many changes from the morphological to biochemical scales, which are caused by GFNs treatment, such as affecting root growth, disrupting cell membrane structure, and altering antioxidant systems and hormone concentrations, can all be mapped to gene expression level. This review provides a comprehensive understanding of the effects of GFNs on plant growth to promote their safe and efficient use.

The dichotomy of nanotechnology as the cutting edge of agriculture: Nano-farming as an asset versus nanotoxicity

The unprecedented setbacks and environmental complications, faced by global agro-farming industry, have led to the advent of nanotechnology in agriculture, which has been recognized as a novel and innovative approach in development of sustainable farming practices. The agricultural regimen is the "head honcho" of the world, however presently certain approaches have been imposing grave danger to the environment and human civilization. The nano-farming paradigm has successfully elevated the growth and development of plants, parallel to the production, quality, germination/transpiration index, photosynthetic machinery, genetic progression, and so on. This has optimized the traditional farming into precision farming, utilising nano-based sensors and nanobionics, smart delivery tools, nanotech facets in plant disease management, nanofertilizers, enhancement of plant adaptive potential to external stress, role in bioenergy conservation and so on. These applications portray nanorevolution as "the big cheese" of global agriculture, mitigating the bottlenecks of conventional practices. Besides the applications of nanotechnology, the review identifies the limitations, like possible harmful impact on environment, mankind and plants, as the "Achilles heel" in agro-industry, aiming to establish its defined role in agriculture, while simultaneously considering the risks, in order to resolve them, thus abiding by "technology-yes, but safety-must". The authors aim to provide a significant opportunity to the nanotech researchers, Botanists and environmentalists, to promote judicial use of nanoparticles and establish a secure and safe environment.

Ex Vivo Human Colon Tissue Exposure to Pristine Graphene Activates Genes Involved in the Binding, Adhesion and Proliferation of Epithelial Cells

Toxicology studies on pristine graphene are limited and lack significant correlations with actual human response. The goal of the current study was to determine the response of total colonic human tissue to pristine graphene exposure. Biopsy punches of colon tissues from healthy human were used to assess the biological response after ex vivo exposure to graphene at three different concentrations (1, 10, and 100 µg/mL). mRNA expression of specific genes or intestinal cytokine abundance was assessed using real-time PCR or multiplex immunoassays, respectively. Pristine graphene-activated genes that are related to binding and adhesion (GTPase and KRAS) within 2 h of exposure. Furthermore, the PCNA (proliferating cell nuclear antigen) gene was upregulated after exposure to graphene at all concentrations. Ingenuity pathway analysis revealed that STAT3 and VEGF signaling pathways (known to be involved in cell proliferation and growth) were upregulated. Graphene exposure (10 µg/mL) for 24 h significantly increased levels of pro-inflammatory cytokines IFNγ, IL-8, IL-17, IL-6, IL-9, MIP-1α, and Eotaxin. Collectively, these results indicated that graphene may activate the STAT3-IL23-IL17 response axis. The findings in this study provide information on toxicity evaluation using a human-relevant ex vivo colon model and serve as a basis for further exploration of its bio-applications.

Current and future perspectives on the use of nanofertilizers for sustainable agriculture: the case of phosphorus nanofertilizer

Over the last century, the demand for food resources has been continuously increasing with the rapid population growth. Therefore, it is critically important to adopt sustainable farming practices that can enhance crop production without the excessive use of fertilizers. In this regard, there is a growing interest in the use of nanomaterials for improving plant nutrition as an alternative to traditional chemical or mineral fertilizers. Using this technology, the efficiency of micro- and macro-nutrients in plants can increase. Various nanomaterials have been successfully applied in agricultural production, compared to conventional fertilizers. Among the major plant nutrients, phosphorus (P) is the least accessible since most farmlands are frequently P deficient. Hence, P use efficiency should be maximized to conserve the resource base and maintain agricultural productivity. This review summarizes the current research and the future possibilities of nanotechnology in the biofortification of plant nutrition, with a focus on P fertilizers. In addition, it covers the challenges, environmental impacts, and toxic effects that have been explored in the area of nanotechnology to improve crop production. The potential uses and benefits of nanoparticle-based fertilizers in precision and sustainable agriculture are also discussed.

Advantage of Nanotechnology-Based Genome Editing System and Its Application in Crop Improvement

Agriculture is an important source of human food. However, current agricultural practices need modernizing and strengthening to fulfill the increasing food requirements of the growing worldwide population. Genome editing (GE) technology has been used to produce plants with improved yields and nutritional value as well as with higher resilience to herbicides, insects, and diseases. Several GE tools have been developed recently, including clustered regularly interspaced short palindromic repeats (CRISPR) with nucleases, a customizable and successful method. The main steps of the GE process involve introducing transgenes or CRISPR into plants via specific gene delivery systems. However, GE tools have certain limitations, including time-consuming and complicated protocols, potential tissue damage, DNA incorporation in the host genome, and low transformation efficiency. To overcome these issues, nanotechnology has emerged as a groundbreaking and modern technique. Nanoparticle-mediated gene delivery is superior to conventional biomolecular approaches because it enhances the transformation efficiency for both temporal (transient) and permanent (stable) genetic modifications in various plant species. However, with the discoveries of various advanced technologies, certain challenges in developing a short-term breeding strategy in plants remain. Thus, in this review, nanobased delivery systems and plant genetic engineering challenges are discussed in detail. Moreover, we have suggested an effective method to hasten crop improvement programs by combining current technologies, such as speed breeding and CRISPR/Cas, with nanotechnology. The overall aim of this review is to provide a detailed overview of nanotechnology-based CRISPR techniques for plant transformation and suggest applications for possible crop enhancement.

Graphitic carbon nitride (g-C3N4) alleviates cadmium-induced phytotoxicity to rice (Oryza sativa L.)

In the present study, graphitic carbon nitride (g-C₃N₄) was synthesized in a tube furnace and characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FTIR). Different concentrations (0-200 mg/L) of g-C₃N₄ were prepared in nutrient solution amended with or without 20 mg/L CdCl₂ for the greenhouse study. Rice seedlings were exposed to g-C₃N₄ and Cd for 20 days. Our results suggest that 200 mg/L g-C₃N₄ significantly increased the fresh weight and root and shoot length as compared with the control, and notably alleviated Cd-induced toxicity. The addition of 200 mg/L g-C₃N₄ significantly reduced the root and shoot Cd content by approximately 14% and 23%, respectively. In addition, 200 mg/L g-C₃N₄ significantly elevated the nitrogen content and decreased C/N ration in rice shoots; most importantly, it alleviated Cd-induced nitrogen reduction. Our findings demonstrated the potential of g-C₃N₄ in regulating plant growth and minimizing the Cd-induced phytotoxicity, and shed light on providing a new strategy to maintain heavy metal contamination in agriculture using a low-cost and environmental friendly NMs.

Impacts of surface chemistry of functional carbon nanodots on the plant growth

Functional carbon nanodots (FCNs) with multiple chemical groups have great impact on the growth regulation of plants. To understand the role of the chemical groups, FCNs were reduced from the raw material by pyrolysis method and hydrolysis method. The chemical structure of these materials were characterized by using TGA, TEM, FT-IR, XPS, Raman and elementary analysis. The raw and reduced FCNs were used as plants growth regulators in culture medium of Arabidopsis thaliana. Our results indicate there is a strong correlation between the physiological responses of plants and the surface chemistries (especially carboxyl group and ester group) of the nanomaterials. The quantum-sized FCNs with multiple carboxyl groups and ester groups show better aqueous dispersity and can induce various positive physiological responses in Arabidopsis thaliana seedlings compared with the FCNs decorated without carboxyl and ester as well as aggregated FCNs. The raw FCNs present higher promotion capacity in plants biomass and roots length, and the quantum-sized FCNs are easier to be absorbed by plants and generate more positive effects on plants.

Physiological, Metabolic, and Transcriptomic Analyses Reveal the Responses of Arabidopsis Seedlings to Carbon Nanohorns

Carbon-based nanomaterials have potential applications in nanoenabled agriculture. However, the physiological and molecular mechanisms underlying single-walled carbon nanohorn (SWCNH)-mediated plant growth remain unclear. Here, we investigated the effects of SWCNHs on Arabidopsis grown in ¹/₄-strength Murashige and Skoog medium via physiological, genetic, and molecular analyses. Treatment with 0.1 mg/L SWCNHs promoted primary root (PR) growth and lateral root (LR) formation; 50 and 100 mg/L SWCNHs inhibited PR growth. Treatment with 0.1 mg/L SWCNHs increased the lengths of the meristematic and elongation zones, and transcriptomic and genetic analyses confirmed the positive effects of SWCNHs on root tip stem cell niche activity and meristematic cell division potential. Increased expression of YUC3 and YUC5 and increased PIN2 abundance improved PR growth and LR development in 0.1 mg/L SWCNH-treated seedlings. Metabolomic analyses revealed that SWCNHs altered the levels of sugars, amino acids, and organic acids, suggesting that SWCNHs reprogrammed carbon/nitrogen metabolism in plants. SWCNHs also regulate plant growth and development by increasing the levels of several secondary metabolites; transcriptomic analyses further supported these results. The present results are valuable for continued use of SWCNHs in agri-nanotechnology, and these molecular approaches could serve as examples for studies on the effects of nanomaterials in plants.

Discerning the mechanism of the multiwalled carbon nanotubes effect on root cell water and nutrient transport

Multiwalled carbon nanotubes (MWCNTs) are tubular carbon structures that are able to enter cells through holes in the plasma membrane and produce changes in gene expression. In this work, we compared the functionality of carbon nanotubes with the electroporation that perforates membranes, in Brassica oleracea var. Italica (broccoli) root protoplasts. For this, we combined those treatments with control conditions and abiotic stress (salinity) in order to elucidate if the response is related to conditions optimal for the plant. The measurement of the osmotic water permeability (Pf), mineral concentrations and expression levels of aquaporins (PIP1s and PIP2s) revealed that the physiological action of the nanotubes was similar to that achieved with electroporation for both Pf and the concentrations of nutrients in the protoplasts. On the other hand, PIP1s and PIP2s expression was increased in the protoplasts receiving the control plus MWCNTs treatment but not in those treated with electroporation. This opens new and interesting lines, as it shows that nanotubes are able to modulate the expression of aquaporins.

Improvement of Commercially Valuable Traits of Industrial Crops by Application of Carbon-based Nanomaterials

Carbon-based nanomaterials (CBNs) have great potential as a powerful tool to improve plant productivity. Here, we investigated the biological effects of graphene and carbon nanotubes (CNTs) on fiber-producing species (cotton, Gossypium hirsutum) and ornamental species (vinca, Catharanthus roseus). The exposure of seeds to CNTs or graphene led to the activation of early seed germination in Catharanthus and overall higher germination in cotton and Catharanthus seeds. The application of CBNs resulted in higher root and shoot growth of young seedlings of both tested species. Cultivation of Catharanthus plants in soil supplemented with CBNs resulted in the stimulation of plant reproductive system by inducing early flower development along with higher flower production. Catharanthus plants cultivated in CNTs or graphene supplemented soil accelerated total flower production by 37 and 58%, respectively. Additionally, CBNs reduced the toxic effects caused by NaCl. Long-term application of CBNs to crops cultivated under salt stress conditions improved the desired phenotypical traits of Catharanthus (higher flower number and leaf number) and cotton (increased fiber biomass) compared to untreated plants of both species cultivated at the same stress condition. The drought stress experiments revealed that introduction of CBNs to matured Catharanthus plant increased the plant survival with no symptoms of leaf wilting as compared to untreated Catharanthus growing in water deficit conditions.

Multi-walled carbon nanotubes improved growth, anatomy, physiology, secondary metabolism, and callus performance in Catharanthus roseus: an in vitro study

This study was conducted to monitor the physiological and molecular responses of Catharanthus roseus (rose periwinkle) to multi-walled carbon nanotube (MWCNT) incorporation into the culture medium. The seeds were grown on hormone-free MS medium supplemented with 0, 50, 100, and 150 mgL^-1of MWCNT. The supplementations of culture medium with MWCNTs led to significant increases in plant growth indexes such as leaf width, leaf area, leaf fresh weight, root length, and total plant biomass). Slight increases were also observed in chlorophyll a (Chla), Chlb, and carotenoid contents (mean = 18.6%) in MWCNT-treated seedlings. Protein concentrations increased by an average of 34% relative to the control. The application of MWCNT resulted in twofold increases in the catalase and peroxidase activities. A similar trend was also observed in the phenylalanine ammonia lyase activities (by an average of 36.5%), soluble phenols (by 23%), and alkaloids (by 1.7-fold). Moreover, upregulations (mean = 37-fold) in the transcriptions of the DAT gene resulted from the MWCNT supplementations. Exposure to MWCNT improved cell sizes and xylem conducting tissue in treated seedlings. The applications of MWCNTs also stimulated the callus initiation and performance, implying their effects on proliferation and possible differentiation. This study has provided evidence of role MWCNT play in improving plant performance and production of pharmaceutical secondary metabolites.

Impact of Pristine Graphene on Intestinal Microbiota Assessed Using a Bioreactor-Rotary Cell Culture System

The increased use of graphene in consumer products such as food contact materials requires a thorough understanding of its effects on the gastrointestinal commensal bacterial population. During the first phase of study, three representative commensal bacterial species (L. acidophilus, B. longum, and E. coli) were exposed to different concentrations (1, 10, and 100 μg/mL) of pristine graphene for 3, 6, and 24 h in the Bioreactor Rotary Cell Culture System (BRCCS) which allowed a continuous interaction of intestinal microbiota with the pristine graphene without precipitation of test material. The results showed that pristine graphene had dose-dependent effects on the growth of selective bacteria. To study the interaction of graphene with more diverse consortia of intestinal microbiota, fresh fecal samples from laboratory rats were used. Rat fecal slurry (3%) was maintained in an anaerobic environment and treated with different concentrations (1, 10, and 100 μg/mL) of pristine graphene for 3, 6, and 24 h. Counts of viable aerobic and anaerobic bacteria were assessed and fecal slurries were also collected for microbial population shift analysis using quantitative real-time PCR, as well as 16s rRNA sequencing. The results showed a significant two-fold increase in both aerobic and anaerobic bacterial counts (expressed as colony forming unit; CFU) during the first 3 h of exposure to all pristine graphene concentrations. However, 24 h of continuous exposure resulted in a 120% decrease in the CFU of aerobic bacteria at the highest concentration and the anaerobic bacteria CFU remained unchanged. Multivariate analysis of the q-PCR data showed that the exposure time, as well as the graphene concentrations, impacted the bacterial population abundance. Community analysis of graphene-treated fecal samples by 16S sequencing revealed significant alteration of 15 taxonomic groups, including 9 species. The increased abundance of butyrate-producing bacteria (Clostridium fimetarium, Clostridium hylemona, and Sutterella wadsworthensis) was correlated with an increase of the short-chain fatty acid, butyric acid after exposure to graphene. These results clearly indicate that graphene may cause adverse effects on the intestinal microbiome at the doses equal to 100 μg/mL. Further experiments using ex vivo intestinal explants (nonanimal model) could reveal the mechanisms by which graphene could perturb the microbe-host intestinal mucosa homeostasis.

Carbon-based nanomaterials as stimulators of production of pharmaceutically active alkaloids in cell culture of Catharanthus roseus

Carbon-based nanomaterials (CBNs) were previously described as regulators of plant cell division. Here, we demonstrated the ability of multi-walled carbon nanotubes (MWCNT) and graphene to enhance biomass production in callus culture of the medicinal plant Catharanthus roseus cultivated in dark conditions. Furthermore, both tested CBNs were able to stimulate biosynthesis of total produced alkaloids in CBN-exposed callus culture of Catharanthus. In one case, total alkaloids in CBN-exposed Catharanthus were double that of unexposed Catharanthus. Analysis of metabolites by HPLC revealed that production of the pharmaceutically active alkaloids vinblastine and vincristine was dramatically enhanced in callus exposed to MWCNT or graphene in both dark and light conditions of callus cultivation. In vitro assays (MTT, flow cytometry) demonstrated that total alkaloid extracts derived from Catharanthus callus treated with CBNs significantly reduced cell proliferation of breast cancer (MCF-7) and lung cancer (A549) cell lines compared to the application of extracts derived from untreated Catharanthus callus.

Applications of carbon nanomaterials in the plant system: A perspective view on the pros and cons

With the remarkable development in the field of nanotechnology, carbon-based nanomaterials (CNMs) have been widely used for numerous applications in different areas of the plant system. The current understanding about the CNMs' accumulation, translocation, plant growth responses, and stress modulations in the plant system is far from complete. There have been relentless efforts by the researchers worldwide in order to acquire newer insights into the plant-CNMs interactions and the consequences. The present review intends to update the reader with the status of the impacts of the different CNMs on plant growth. Research reports from the plant biotechnologists have documented mixed effects (which are dependent on CNMs' concentration) of the CNMs' exposure on plants ranging from enhanced crop yield to acute cytotoxicity. The growth and yield pattern vary from species to species and are dependent on the dosage of the CNMs applied. Studies found an increase in vegetative growth and yield of fruit/seed at lower concentration of CNMs, but a decrease in these observables were also noted when higher concentrations of CNMs were used. In general, at lower concentrations, CNMs were found to be effective in enhancing (water uptake, water transport, seed germination, nitrogenase, photosystem and antioxidant activities), activating (water channels proteins) and promoting (nutrition absorption); all these change when concentrations are raised. All these aspects have been reviewed thoroughly in this article, with a focus on the recent updates on the role of the CNMs in augmenting or retarding plant growth. Sections have been devoted to the various features of the CNMs and their roles in inducing plant growth, phytotoxic responses of the plants and overall crop improvement. Concluding remarks have been added to propose future directions of research on the CNMs-plant interactions and also to sound a warning on the use of CNMs in agriculture.

Nanotechnology in Plant Science: To Make a Long Story Short

This mini-review aims at gaining knowledge on basic aspects of plant nanotechnology. While in recent years the enormous progress of nanotechnology in biomedical sciences has revolutionized therapeutic and diagnostic approaches, the comprehension of nanoparticle-plant interactions, including uptake, mobilization and accumulation, is still in its infancy. Deeper studies are needed to establish the impact of nanomaterials (NMs) on plant growth and agro-ecosystems and to develop smart nanotechnology applications in crop improvement. Herein we provide a short overview of NMs employed in plant science and concisely describe key NM-plant interactions in terms of uptake, mobilization mechanisms, and biological effects. The major current applications in plants are reviewed also discussing the potential use of polymeric soft NMs which may open new and safer opportunities for smart delivery of biomolecules and for new strategies in plant genetic engineering, with the final aim to enhance plant defense and/or stimulate plant growth and development and, ultimately, crop production. Finally, we envisage that multidisciplinary collaborative approaches will be central to fill the knowledge gap in plant nanotechnology and push toward the use of NMs in agriculture and, more in general, in plant science research.

Influence of Hydroxyapatite Nanoparticles on Germination and Plant Metabolism of Tomato (Solanum lycopersicum L.): Preliminary Evidence

The Nutrient Use Efficiency in intensive agriculture is lower than 50% for macronutrients. This feature results in unsustainable financial and environmental costs. Nanofertilizers are a promising application of nanotechnology in agriculture. The use of nanofertilizers in an efficient and safe manner calls for knowledge about the actual effects of nanoproducts on the plant metabolism and eventually on the carrier release kinetics and nutrient accumulation. Hydroxyapatite (Ca10(PO4)6(OH)2) nanoparticles (nHA) have an interesting potential to be used as nanofertilizers. In this study, the effects of different nHA solutions stabilized with carboxymethylcellulose (CMC) were evaluated on germination, seedling growth, and metabolism of Solanum lycopersicum L., used as model species. Our observations showed that the percentage germination of S. lycopersicum is not influenced by increasing concentrations of nHa, while root elongation is strongly stimulated. Tomato plants grown in hydroponics in the presence of nHA have not suffered phytotoxic effects. We conclude that nHA had nontoxic effects on our model plant and therefore it could be used both as a P supplier and carrier of other elements and molecules.

The impact of tomato fruits containing multi-walled carbon nanotube residues on human intestinal epithelial cell barrier function and intestinal microbiome composition

Carbon nanomaterials (CNMs) can positively regulate seed germination and enhance plant growth. However, clarification of the impact of plant organs containing absorbed CNMs on animal and human health is a critical step of risk assessment for new nano-agro-technology. In this study, we have taken a comprehensive approach to studying the effect tomato fruits derived from plants exposed to multi-walled carbon nanotubes (CNTs) have on gastrointestinal epithelial barrier integrity and their impact on the human commensal intestinal microbiota using an in vitro cell culture and batch human fecal suspension models. The effects of CNTs on selected pure cultures of Salmonella enterica Typhimurium and Lactobacillus acidophilus were also evaluated. This study demonstrated that CNT-containing fruits or the corresponding residual level of pure CNTs (0.001 μg ml-1) was not sufficient to initiate a significant change in transepithelial resistance and on gene expression of the model T-84 human intestinal epithelial cells. However, at 10 μg ml-1 concentration CNTs were able to penetrate the cell membrane and change the gene expression profile of exposed cells. Moreover, extracts from CNT-containing fruits had minimal to no effect on human intestinal microbiota as revealed by culture-based analysis and 16S rRNA sequencing.

Enhanced organic contaminants accumulation in crops: Mechanisms, interactions with engineered nanomaterials in soil

The mechanism of enhanced accumulation of organic contaminants in crops with engineered nanomaterials (ENMs) were investigated by co-exposure of crops (Ipomoea aquatica Forsk (Swamp morning-glory), Cucumis sativus L. (cucumber), Zea mays L. (corn), Spinacia oleracea L. (spinach) and Cucurbita moschata (pumpkin))to a range of chemicals (polycyclic aromatic hydrocarbons (PAHs), organochlorine pesticides (OCPs) and polybrominated diphenyl ether (PBDE)) and ENMs (TiO₂, Ag, Al₂O₃, graphene, carbon nanotubes (CNTs)) in soil. Induced by 50 mg kg^-1 graphene co-exposure, the increase range of BDE-209, BaP, p,p'-DDE, HCB, PYR, FLU, ANT, and PHEN in the plants were increased in the range of 7.51-36.42, 5.69-32.77, 7.09-59.43, 11.61-66.73, 4.58-57.71, 5.79-109.07, 12.85-109.76, and15.57-127.75 ng g^-1, respectively. The contaminants in ENMs-spiked and control soils were separated into bioavailable, bound and residual fractions using a sequential ultrasonic extraction procedure (SUEP) to investigate the mechanism of the enhanced accumulation. The bioavailable fraction in spiked soils showed no significant difference (p > 0.05) from that in the control, while the bound fraction increased in equal proportion (p > 0.05) to the reduction in the residual fraction. These results implied that ENMs can competitively adsorbed the bound of organic contaminants from soil and co-transferred into crops, followed by a portion of the residual fraction transferred to the bound fraction to maintain the balance of different fractions in soils. The mass balance was all higher than 98.5%, indicating the portion of degraded contaminants was less than 1.5%. These findings could expand our knowledge about the organic contaminants accumulation enhancement in crops with ENMs.

Effects of carbon-based nanomaterials on seed germination, biomass accumulation and salt stress response of bioenergy crops

Bioenergy crops are an attractive option for use in energy production. A good plant candidate for bioenergy applications should produce a high amount of biomass and resist harsh environmental conditions. Carbon-based nanomaterials (CBNs) have been described as promising seed germination and plant growth regulators. In this paper, we tested the impact of two CBNs: graphene and multi-walled carbon nanotubes (CNTs) on germination and biomass production of two major bioenergy crops (sorghum and switchgrass). The application of graphene and CNTs increased the germination rate of switchgrass seeds and led to an early germination of sorghum seeds. The exposure of switchgrass to graphene (200 mg/l) resulted in a 28% increase of total biomass produced compared to untreated plants. We tested the impact of CBNs on bioenergy crops under salt stress conditions and discovered that CBNs can significantly reduce symptoms of salt stress imposed by the addition of NaCl into the growth medium. Using an ion selective electrode, we demonstrated that the concentration of Na⁺ ions in NaCl solution can be significantly decreased by the addition of CNTs to the salt solution. Our data confirmed the potential of CBNs as plant growth regulators for non-food crops and demonstrated the role of CBNs in the protection of plants against salt stress by desalination of saline growth medium.

Nanofertilizer for Precision and Sustainable Agriculture: Current State and Future Perspectives

The increasing food demand as a result of the rising global population has prompted the large-scale use of fertilizers. As a result of resource constraints and low use efficiency of fertilizers, the cost to the farmer is increasing dramatically. Nanotechnology offers great potential to tailor fertilizer production with the desired chemical composition, improve the nutrient use efficiency that may reduce environmental impact, and boost the plant productivity. Furthermore, controlled release and targeted delivery of nanoscale active ingredients can realize the potential of sustainable and precision agriculture. A review of nanotechnology-based smart and precision agriculture is discussed in this paper. Scientific gaps to be overcome and fundamental questions to be answered for safe and effective development and deployment of nanotechnology are addressed.

Assessment of Effects of the Long-Term Exposure of Agricultural Crops to Carbon Nanotubes

Carbon-based nanoparticles (CBNs) are nanomaterials that have been shown to be plant growth regulators. Here, we investigated the effects of long-term exposure to multi-walled carbon nanotubes (MWCNTs) on the growth of three important crops (barley, soybean, and corn). The tested species were cultivated in hydroponics supplemented with 50 μg/mL MWCNTs. After 20 weeks of continuous exposure to the nanomaterials, no significant toxic effects on plant development were observed. Several positive phenotypical changes were recorded, in addition to the enhancement of photosynthesis in MWCNT-exposed crops. Raman spectroscopy with point-by-point mapping proved that the MWCNTs in the hydroponic solution moved into all tested species and were distributed in analyzed organs (leaves, stems, roots, and seeds). Our results confirmed the significant potential of CBN in plant agriculture. However, the documented presence of MWCNTs in different organs of all exposed crops highlighted the importance of detailed risk assessment of nanocontaminated plants moving into the food chain.

Exploration of nano carbons in relevance to plant systems

The potential applications of nano-carbons and biochar towards plant growth are highlighted and discussed in this perspective article.

Contrasting effects of engineered carbon nanotubes on plants: a review

Rapid surge of interest for carbon nanotube (CNT) in the last decade has made it an imperative member of nanomaterial family. Because of the distinctive physicochemical properties, CNTs are widely used in a number of scientific applications including plant sciences. This review mainly describes the role of CNT in plant sciences. Contradictory effects of CNT on plants physiology are reported. CNT can act as plant growth inducer causing enhanced plant dry biomass and root/shoot lengths. At the same time, CNT can cause negative effects on plants by forming reactive oxygen species in plant tissues, consequently leading to cell death. Enhanced seed germination with CNT is related to the water uptake process. CNT can be positioned as micro-tubes inside the plant body to enhance the water uptake efficiency. Due to its ability to act as a slow-release fertilizer and plant growth promoter, CNT is transpiring as a novel nano-carbon fertilizer in the field of agricultural sciences. On the other hand, accumulation of CNT in soil can cause deleterious effects on soil microbial diversity, composition and population. It can further modify the balance between plant-toxic metals in soil, thereby enhancing the translocation of heavy metal(loids) into the plant system. The research gaps that need careful attention have been identified in this review.

Multiwalled Carbon Nanotubes Dramatically Affect the Fruit Metabolome of Exposed Tomato Plants

Here, we reported that multiwalled carbon nanotubes (MWCNT) added to hydroponics system can enhance fruit production of exposed tomato plants. We quantified the exact amount of MWCNT accumulated inside of fruits collected by MWCNT-exposed plants using an advanced microwave induced heating technique (MIH). We found that absorption of MWCNT by tomato fruits significantly affected total fruit metabolome as was confirmed by LC-MS. Our data highlight the importance of comprehensive toxicological risk assessment of plants contaminated with carbon nanomaterials.

Bioaccumulation and Toxicity of 13C-Skeleton Labeled Graphene Oxide in Wheat

Graphene nanomaterials have many diverse applications, but are considered to be emerging environmental pollutants. Thus, their potential environmental risks and biosafety are receiving increased attention. Bioaccumulation and toxicity evaluations in plants are essential for biosafety assessment. In this study, ¹³C-stable isotope labeling of the carbon skeleton of graphene oxide (GO) was applied to investigate the bioaccumulation and toxicity of GO in wheat. Bioaccumulation of GO was accurately quantified according to the ¹³C/¹²C ratio. Wheat seedlings were exposed to ¹³C-labeled GO at 1.0 mg/mL in nutrient solution for 15 d. ¹³C-GO accumulated predominantly in the root with a content of 112 μg/g at day 15, hindered the development and growth of wheat plants, disrupted root structure and cellular ultrastructure, and promoted oxidative stress. The GO that accumulated in the root showed extremely limited translocation to the stem and leaves. During the experimental period, GO was excreted slowly from the root. GO inhibited the germination of wheat seeds at high concentrations (≥0.4 mg/mL). The mechanism of GO toxicity to wheat may be associated with oxidative stress induced by GO bioaccumulation, reflected by the changes of malondialdehyde concentration, catalase activity, and peroxidase activity. The results demonstrate that ¹³C labeling is a promising method to investigate environmental impacts and fates of carbon nanomaterials in biological systems.

Biological effects of carbon nanotubes generated in forest wildfire ecosystems rich in resinous trees on native plants

Carbon nanotubes (CNTs) have a broad range of applications and are generally considered human-engineered nanomaterials. However, carbon nanostructures have been found in ice cores and oil wells, suggesting that nature may provide appropriate conditions for CNT synthesis. During forest wildfires, materials such as turpentine and conifer tissues containing iron under high temperatures may create chemical conditions favorable for CNT generation, similar to those in synthetic methods. Here, we show evidence of naturally occurring multiwalled carbon nanotubes (MWCNTs) produced from Pinus oocarpa and Pinus pseudostrobus, following a forest wildfire. The MWCNTs showed an average of 10 walls, with internal diameters of ∼2.5 nm and outer diameters of ∼14.5 nm. To verify whether MWCNT generation during forest wildfires has a biological effect on some characteristic plant species of these ecosystems, germination and development of seedlings were conducted. Results show that the utilization of comparable synthetic MWCNTs increased seed germination rates and the development of Lupinus elegans and Eysenhardtia polystachya, two plants species found in the burned forest ecosystem. The finding provides evidence that supports the generation and possible ecological functions of MWCNTs in nature.

Increasing evidence indicates low bioaccumulation of carbon nanotubes

As the production of carbon nanotubes (CNTs) expands, so might the potential for release into the environment. The possibility of bioaccumulation and toxicological effects has prompted research on their fate and potential ecological effects. For many organic chemicals, bioaccumulation properties are associated with lipid-water partitioning properties. However, predictions based on phase partitioning provide a poor fit for nanomaterials. In the absence of data on the bioaccumulation and other properties of CNTs, the Office of Pollution Prevention and Toxics (OPPT) within the US Environmental Protection Agency (EPA) subjects new pre-manufacture submissions for all nanomaterials to a higher-level review. We review the literature on CNT bioaccumulation by plants, invertebrates and non-mammalian vertebrates, summarizing 40 studies to improve the assessment of the potential for bioaccumulation. Because the properties and environmental fate of CNTs may be affected by type (single versus multiwall), functionalization, and dosing technique, the bioaccumulation studies were reviewed with respect to these factors. Absorption into tissues and elimination behaviors across species were also investigated. All of the invertebrate and non-mammalian vertebrate studies showed little to no absorption of the material from the gut tract to other tissues. These findings combined with the lack of biomagnification in the CNT trophic transfer studies conducted to date suggest that the overall risk of trophic transfer is low. Based on the available data, in particular the low levels of absorption of CNTs across epithelial surfaces, CNTs generally appear to form a class that should be designated as a low concern for bioaccumulation.