1
|
Silva AB, Murcia M, Mohseni O, Takahashi R, Forner-Cordero A, Seyfarth A, Hosoda K, Sharbafi MA. Design of Low-Cost Modular Bio-Inspired Electric-Pneumatic Actuator (EPA)-Driven Legged Robots. Biomimetics (Basel) 2024; 9:164. [PMID: 38534849 DOI: 10.3390/biomimetics9030164] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/01/2024] [Revised: 02/29/2024] [Accepted: 03/04/2024] [Indexed: 03/28/2024] Open
Abstract
Exploring the fundamental mechanisms of locomotion extends beyond mere simulation and modeling. It necessitates the utilization of physical test benches to validate hypotheses regarding real-world applications of locomotion. This study introduces cost-effective modular robotic platforms designed specifically for investigating the intricacies of locomotion and control strategies. Expanding upon our prior research in electric-pneumatic actuation (EPA), we present the mechanical and electrical designs of the latest developments in the EPA robot series. These include EPA Jumper, a human-sized segmented monoped robot, and its extension EPA Walker, a human-sized bipedal robot. Both replicate the human weight and inertia distributions, featuring co-actuation through electrical motors and pneumatic artificial muscles. These low-cost modular platforms, with considerations for degrees of freedom and redundant actuation, (1) provide opportunities to study different locomotor subfunctions-stance, swing, and balance; (2) help investigate the role of actuation schemes in tasks such as hopping and walking; and (3) allow testing hypotheses regarding biological locomotors in real-world physical test benches.
Collapse
Affiliation(s)
- Alessandro Brugnera Silva
- Lauflabor Locomotion Laboratory, Centre for Cognitive Science, Technical University of Darmstadt, 64289 Darmstadt, Germany
- Biomechatronics Laboratory, Department of Mechatronics and Mechanical Systems of the Polytechnic School of the University of São Paulo (USP), São Paulo 05508-030, SP, Brazil
| | - Marc Murcia
- Lauflabor Locomotion Laboratory, Centre for Cognitive Science, Technical University of Darmstadt, 64289 Darmstadt, Germany
| | - Omid Mohseni
- Lauflabor Locomotion Laboratory, Centre for Cognitive Science, Technical University of Darmstadt, 64289 Darmstadt, Germany
| | - Ryu Takahashi
- Adaptive Robotics Laboratory, Graduate School of Engineering Science, Osaka University, Toyonaka 560-0043, Japan
| | - Arturo Forner-Cordero
- Biomechatronics Laboratory, Department of Mechatronics and Mechanical Systems of the Polytechnic School of the University of São Paulo (USP), São Paulo 05508-030, SP, Brazil
| | - Andre Seyfarth
- Lauflabor Locomotion Laboratory, Centre for Cognitive Science, Technical University of Darmstadt, 64289 Darmstadt, Germany
| | - Koh Hosoda
- Adaptive Robotics Laboratory, Graduate School of Engineering Science, Osaka University, Toyonaka 560-0043, Japan
- Graduate School of Engineering, Kyoto University, Kyoto 606-8501, Japan
| | - Maziar Ahmad Sharbafi
- Lauflabor Locomotion Laboratory, Centre for Cognitive Science, Technical University of Darmstadt, 64289 Darmstadt, Germany
| |
Collapse
|
2
|
Chen Y, Yu W, Benali A, Lu D, Kok SY, Wang R. Towards Human-like Walking with Biomechanical and Neuromuscular Control Features: Personalized Attachment Point Optimization Method of Cable-Driven Exoskeleton. Front Aging Neurosci 2024; 16:1327397. [PMID: 38371400 PMCID: PMC10870425 DOI: 10.3389/fnagi.2024.1327397] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/24/2023] [Accepted: 01/05/2024] [Indexed: 02/20/2024] Open
Abstract
The cable-driven exoskeleton can avoid joint misalignment, and is substantial alterations in the pattern of muscle synergy coordination, which arouse more attention in recent years to facilitate exercise for older adults and improve their overall quality of life. This study leverages principles from neuroscience and biomechanical analysis to select attachment points for cable-driven soft exoskeletons. By extracting key features of human movement, the objective is to develop a subject-specific design methodology that provides precise and personalized support in the attachment points optimization of cable-driven exoskeleton to achieve natural gait, energy efficiency, and muscle coordination controllable in the domain of human mobility and rehabilitation. To achieve this, the study first analyzes human walking experimental data and extracts biomechanical features. These features are then used to generate trajectories, allowing better natural movement under complete cable-driven exoskeleton control. Next, a genetic algorithm-based method is employed to minimize energy consumption and optimize the attachment points of the cable-driven system. This process identifies connections that are better suited for the human model, leading to improved efficiency and natural movement. By comparing the calculated elderly human model driven by exoskeleton with experimental subject in terms of joint angles, joint torques and muscle forces, the human model can successfully replicate subject movement and the cable output forces can mimic human muscle coordination. The optimized cable attachment points facilitate more natural and efficient collaboration between humans and the exoskeleton, making significant contributions to the field of assisting the elderly in rehabilitation.
Collapse
Affiliation(s)
- Yasheng Chen
- School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an, China
| | - Weiwei Yu
- School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an, China
| | - Abderraouf Benali
- LISV, Versailles Systems Engineering Laboratory, Université de Versailles Saint Quentin en Yvelines, Paris, France
| | - Donglai Lu
- School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an, China
| | - Siong Yuen Kok
- School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an, China
| | - Runxiao Wang
- School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an, China
| |
Collapse
|
3
|
Arampatzis A, Kharazi M, Theodorakis C, Mersmann F, Bohm S. Biarticular mechanisms of the gastrocnemii muscles enhance ankle mechanical power and work during running. ROYAL SOCIETY OPEN SCIENCE 2023; 10:230007. [PMID: 37650058 PMCID: PMC10465202 DOI: 10.1098/rsos.230007] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/17/2023] [Accepted: 08/07/2023] [Indexed: 09/01/2023]
Abstract
The objective of the study was to explore how biarticular mechanisms of the gastrocnemii muscles may provide an important energy source for power and work at the ankle joint with increasing running speed. Achilles tendon force was quantified as a proxy of the triceps surae muscle force and the contribution of the monoarticular soleus and the biarticular gastrocnemii to the mechanical power and work performed at the ankle joint was investigated in three running speeds (transition 2.0 m s-1, slow 2.5 m s-1, fast 3.5 m s-1). Although the contribution of the soleus was higher, biarticular mechanisms of the gastrocnemii accounted for a relevant part of the performed mechanical power and work at the ankle joint. There was an ankle-to-knee joint energy transfer in the first part of the stance phase and a knee-to-ankle joint energy transfer during push-off via the gastrocnemii muscles, which made up 16% of the total positive ankle joint work. The rate of knee-to-ankle joint energy transfer increased with speed, indicating a speed-related participation of biarticular mechanisms in running. This energy transfer via the gastrocnemii seems to occur with negligible energy absorption/production from the quadriceps vasti contractile elements and is rather an energy exchange between elastic structures.
Collapse
Affiliation(s)
- Adamantios Arampatzis
- Department of Training and Movement Sciences, Humboldt-Universität zu Berlin, Philippstr. 13, Haus 11, 10115 Berlin, Germany
- Berlin School of Movement Science, Humboldt-Universität zu Berlin, 10115 Berlin, Germany
| | - Mohamadreza Kharazi
- Department of Training and Movement Sciences, Humboldt-Universität zu Berlin, Philippstr. 13, Haus 11, 10115 Berlin, Germany
- Berlin School of Movement Science, Humboldt-Universität zu Berlin, 10115 Berlin, Germany
| | - Christos Theodorakis
- Department of Training and Movement Sciences, Humboldt-Universität zu Berlin, Philippstr. 13, Haus 11, 10115 Berlin, Germany
- Berlin School of Movement Science, Humboldt-Universität zu Berlin, 10115 Berlin, Germany
| | - Falk Mersmann
- Department of Training and Movement Sciences, Humboldt-Universität zu Berlin, Philippstr. 13, Haus 11, 10115 Berlin, Germany
- Berlin School of Movement Science, Humboldt-Universität zu Berlin, 10115 Berlin, Germany
| | - Sebastian Bohm
- Department of Training and Movement Sciences, Humboldt-Universität zu Berlin, Philippstr. 13, Haus 11, 10115 Berlin, Germany
- Berlin School of Movement Science, Humboldt-Universität zu Berlin, 10115 Berlin, Germany
| |
Collapse
|
4
|
Kharazi M, Theodorakis C, Mersmann F, Bohm S, Arampatzis A. Contractile Work of the Soleus and Biarticular Mechanisms of the Gastrocnemii Muscles Increase the Net Ankle Mechanical Work at High Walking Speeds. BIOLOGY 2023; 12:872. [PMID: 37372156 DOI: 10.3390/biology12060872] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/11/2023] [Revised: 06/13/2023] [Accepted: 06/13/2023] [Indexed: 06/29/2023]
Abstract
Increasing walking speed is accompanied by an increase of the mechanical power and work performed at the ankle joint despite the decrease of the intrinsic muscle force potential of the soleus (Sol) and gastrocnemius medialis (GM) muscles. In the present study, we measured Achilles tendon (AT) elongation and, based on an experimentally determined AT force-elongation relationship, quantified AT force at four walking speeds (slow 0.7 m.s-1, preferred 1.4 m.s-1, transition 2.0 m.s-1, and maximum 2.6 ± 0.3 m.s-1). Further, we investigated the mechanical power and work of the AT force at the ankle joint and, separately, the mechanical power and work of the monoarticular Sol at the ankle joint and the biarticular gastrocnemii at the ankle and knee joints. We found a 21% decrease in maximum AT force at the two higher speeds compared to the preferred; however, the net work of the AT force at the ankle joint (ATF work) increased as a function of walking speed. An earlier plantar flexion accompanied by an increased electromyographic activity of the Sol and GM muscles and a knee-to-ankle joint energy transfer via the biarticular gastrocnemii increased the net ATF mechanical work by 1.7 and 2.4-fold in the transition and maximum walking speed, respectively. Our findings provide first-time evidence for a different mechanistic participation of the monoarticular Sol muscle (i.e., increased contractile net work carried out) and the biarticular gastrocnemii (i.e., increased contribution of biarticular mechanisms) to the speed-related increase of net ATF work.
Collapse
Affiliation(s)
- Mohamadreza Kharazi
- Department of Training and Movement Sciences, Humboldt-Universität zu Berlin, 10115 Berlin, Germany
- Berlin School of Movement Science, 10115 Berlin, Germany
| | - Christos Theodorakis
- Department of Training and Movement Sciences, Humboldt-Universität zu Berlin, 10115 Berlin, Germany
- Berlin School of Movement Science, 10115 Berlin, Germany
| | - Falk Mersmann
- Department of Training and Movement Sciences, Humboldt-Universität zu Berlin, 10115 Berlin, Germany
- Berlin School of Movement Science, 10115 Berlin, Germany
| | - Sebastian Bohm
- Department of Training and Movement Sciences, Humboldt-Universität zu Berlin, 10115 Berlin, Germany
- Berlin School of Movement Science, 10115 Berlin, Germany
| | - Adamantios Arampatzis
- Department of Training and Movement Sciences, Humboldt-Universität zu Berlin, 10115 Berlin, Germany
- Berlin School of Movement Science, 10115 Berlin, Germany
| |
Collapse
|
5
|
Bioinspired 3D-Printed Snakeskins Enable Effective Serpentine Locomotion of a Soft Robotic Snake. Soft Robot 2022. [DOI: 10.1089/soro.2022.0051] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/03/2022] Open
|
6
|
Zhou T, Zhou Z, Zhang H, Chen W. Modulating Multiarticular Energy during Human Walking and Running with an Unpowered Exoskeleton. SENSORS (BASEL, SWITZERLAND) 2022; 22:8539. [PMID: 36366237 PMCID: PMC9653640 DOI: 10.3390/s22218539] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/08/2022] [Revised: 10/31/2022] [Accepted: 11/04/2022] [Indexed: 06/16/2023]
Abstract
Researchers have made advances in reducing the metabolic rate of both walking and running by modulating mono-articular energy with exoskeletons. However, how to modulate multiarticular energy with exoskeletons to improve the energy economy of both walking and running is still a challenging problem, due to the lack of understanding of energy transfer among human lower-limb joints. Based on the study of the energy recycling and energy transfer function of biarticular muscles, we proposed a hip-knee unpowered exoskeleton that emulates and reinforces the function of the hamstrings and rectus femoris in different gait phases. The biarticular exo-tendon of the exoskeleton assists hamstrings to recycle the kinetic energy of the leg swing while providing hip extension torque in the swing phase. In the following stance phase, the exo-tendon releases the stored energy to assist the co-contraction of gluteus maximus and rectus femoris for both hip extension and knee extension, thus realizing the phased modulation of hip and knee joint energy. The metabolic rate of both walking (1.5 m/s) and running (2.5 m/s) can be reduced by 6.2% and 4.0% with the multiarticular energy modulation of a hip-knee unpowered exoskeleton, compared to that of walking and running without an exoskeleton. The bio-inspired design method of this study may inspire people to develop devices that assist multiple gaits in the future.
Collapse
|
7
|
McGrath J, Alvarado J. Hill-type, bioinspired actuation delivers energy economy in DC motors. BIOINSPIRATION & BIOMIMETICS 2022; 17:066021. [PMID: 36228607 DOI: 10.1088/1748-3190/ac9a1a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/11/2022] [Accepted: 10/13/2022] [Indexed: 06/16/2023]
Abstract
Electromagnetic motors convert stored energy to mechanical work through a linear force-velocity (FV) relationship. In biological systems, however, muscle actuation is characterized by the hyperbolic FV mechanisms of the Hill muscle-in which a parameterαcharacterizes the degree of nonlinearity. Previous work has shown that bioinspiration in human-engineered systems can contribute favorable mechanical attributes-such as energy efficiency, self-stability, and flexibility, among others. In this study, we first construct an easily amendable, bioinspired electromagnetic motor which produces FV curves that mimic the Hill model of muscle with a high degree of accuracy. A proportional-integral-differential (PID) controller converges the characteristically linear FV relationship of a DC motor to nonlinear Hill-type force outputs. The bioinspired electric motor does a fixed amount of work by lifting a 147.5 g mass, and we record the translational velocity of the mass and the nonlinear applied force of the motor. Under optimized gain coefficients in the PID, the bioinspired motor achieves agreement ofR2>0.99with the Hill muscle model. Studies have shown that designing biologically inspired actuators produce comparatively energy efficient systems. We investigate the energy economy of actuating our motor with nonlinear, Hill-type forces in direct comparison with conventional linear FV actuation techniques. We find that the bioinspired motor delivers energy economy with respect to energy consumption and conversion: the nonlinear, Hill-type DC motor reduces the energetic cost of actuation when delivering a fixed amount of mechanical work.
Collapse
Affiliation(s)
- Jake McGrath
- Department of Physics, University of Texas at Austin, Austin, TX, United States of America
| | - José Alvarado
- Department of Physics, University of Texas at Austin, Austin, TX, United States of America
| |
Collapse
|
8
|
Koçak M, Yazıcı MV, Akdal E, Can FC, Gezgin E. Utilization of Function Generation Synthesis on Biomimetics: A Case Study on Moray Eel Double Jaw Design. Biomimetics (Basel) 2022; 7:biomimetics7040145. [PMID: 36278702 PMCID: PMC9590036 DOI: 10.3390/biomimetics7040145] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/01/2022] [Revised: 09/24/2022] [Accepted: 09/24/2022] [Indexed: 11/16/2022] Open
Abstract
Throughout history, humans have observed living or non-living things in nature and then imitated them in relation to these observations. This is due to the fact that the energy found in nature is generally consumed at an optimal level in order for it to endure. Biomimetic inspiration in many designs and applications is widely displayed, including within the field of engineering. In this paper, we were inspired by the double set of jaws found in the moray eel, which gives this fish a huge advantage while hunting, with a mobile pharyngeal jaw that works together with its oral jaw in order to overcome ineffective suction capabilities. A procedure that mimics the hunting motion of the moray eel was utilized by considering the overall movement as a single degree of freedom with multiple outputs on account of the repeating motion that is required during hunting. This procedure includes structural and dimensioning synthesis, wherein the latter was utilized with analytic kinematic synthesis for each linkage transfer. The flexibilities in parameters were taken into account with a novel multiple iterative kinematic synthesis algorithm that resulted in various mechanisms with the same purpose. Among the excessive number of resultant mechanisms, the optimization was carried out by considering the highest torque transmission ratio at critical timings that were specified as bio-constraints. In the end, the kinematic movement validation was utilized.
Collapse
Affiliation(s)
- Mertcan Koçak
- Department of Mechatronics Engineering, İzmir Katip Çelebi University, 35620 İzmir, Turkey
- Correspondence:
| | - Mustafa Volkan Yazıcı
- Department of Mechanical Engineering, İzmir Katip Çelebi University, 35620 İzmir, Turkey
| | - Efecan Akdal
- Department of Mechanical Engineering, Yaşar University, 35100 İzmir, Turkey
| | - Fatih Cemal Can
- Department of Mechatronics Engineering, İzmir Katip Çelebi University, 35620 İzmir, Turkey
| | - Erkin Gezgin
- Department of Mechatronics Engineering, İzmir Katip Çelebi University, 35620 İzmir, Turkey
| |
Collapse
|
9
|
Abstract
AbstractIn order to approach the performance of biological locomotion in legged robots, better integration between body design and control is required. In that respect, understanding the mechanics and control of human locomotion will help us build legged robots with comparable efficient performance. From another perspective, developing bioinspired robots can also improve our understanding of human locomotion. In this work, we create a bioinspired robot with a blended physical and virtual impedance control to configure the robot’s mechatronic setup. We consider human neural control and musculoskeletal system a blueprint for a hopping robot. The hybrid electric-pneumatic actuator (EPA) presents an artificial copy of this biological system to implement the blended control. By defining efficacy as a metric that encompasses both performance and efficiency, we demonstrate that incorporating a simple force-based control besides constant pressure pneumatic artificial muscles (PAM) alone can increase the efficiency up to 21% in simulations and 7% in experiments with the 2-segmented EPA-hopper robot. Also, we show that with proper adjustment of the force-based controller and the PAMs, efficacy can be further increased to 41%. Finally, experimental results with the 3-segmented EPA-hopper robot and comparisons with human hopping confirm the extendability of the proposed methods to more complex robots.
Collapse
|
10
|
Fang J, Zhuang Y, Liu K, Chen Z, Liu Z, Kong T, Xu J, Qi C. A Shift from Efficiency to Adaptability: Recent Progress in Biomimetic Interactive Soft Robotics in Wet Environments. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2104347. [PMID: 35072360 PMCID: PMC8922102 DOI: 10.1002/advs.202104347] [Citation(s) in RCA: 14] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/29/2021] [Revised: 11/30/2021] [Indexed: 05/07/2023]
Abstract
Research field of soft robotics develops exponentially since it opens up many imaginations, such as human-interactive robot, wearable robots, and transformable robots in unpredictable environments. Wet environments such as sea and in vivo represent dynamic and unstructured environments that adaptive soft robots can reach their potentials. Recent progresses in soft hybridized robotics performing tasks underwater herald a diversity of interactive soft robotics in wet environments. Here, the development of soft robots in wet environments is reviewed. The authors recapitulate biomimetic inspirations, recent advances in soft matter materials, representative fabrication techniques, system integration, and exemplary functions for underwater soft robots. The authors consider the key challenges the field faces in engineering material, software, and hardware that can bring highly intelligent soft robots into real world.
Collapse
Affiliation(s)
- Jielun Fang
- College of Mechatronics and Control EngineeringShenzhen UniversityShenzhen518000China
| | - Yanfeng Zhuang
- Department of Biomedical EngineeringSchool of MedicineShenzhen UniversityShenzhenGuangdong518000China
| | - Kailang Liu
- College of Mechatronics and Control EngineeringShenzhen UniversityShenzhen518000China
| | - Zhuo Chen
- The State Key Laboratory of Chemical EngineeringDepartment of Chemical EngineeringTsinghua UniversityBeijing100084China
| | - Zhou Liu
- College of Chemistry and Environmental EngineeringShenzhen UniversityShenzhenGuangdong518000China
| | - Tiantian Kong
- Department of Biomedical EngineeringSchool of MedicineShenzhen UniversityShenzhenGuangdong518000China
| | - Jianhong Xu
- The State Key Laboratory of Chemical EngineeringDepartment of Chemical EngineeringTsinghua UniversityBeijing100084China
| | - Cheng Qi
- College of Mechatronics and Control EngineeringShenzhen UniversityShenzhen518000China
| |
Collapse
|
11
|
Huang B, Chen W, Liang J, Cheng L, Xiong C. Characterization and Categorization of Various Human Lower Limb Movements Based on Kinematic Synergies. Front Bioeng Biotechnol 2022; 9:793746. [PMID: 35127668 PMCID: PMC8812690 DOI: 10.3389/fbioe.2021.793746] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/12/2021] [Accepted: 12/20/2021] [Indexed: 11/23/2022] Open
Abstract
A proper movement categorization reduces the complexity of understanding or reproducing human movements in fields such as physiology, rehabilitation, and robotics, through partitioning a wide variety of human movements into representative sub-motion groups. However, how to establish a categorization (especially a quantitative categorization) for various human lower limb movements is rarely investigated in literature and remains challenging due to the diversity and complexity of the lower limb movements (diverse gait modes and interaction styles with the environment). Here we present a quantitative categorization for the various lower limb movements. To this end, a similarity measure between movements was first built based on limb kinematic synergies that provide a unified and physiologically meaningful framework for evaluating the similarities among different types of movements. Then, a categorization was established via hierarchical cluster analysis for thirty-four lower limb movements, including walking, running, hopping, sitting-down-standing-up, and turning in different environmental conditions. According to the movement similarities, the various movements could be divided into three distinct clusters (cluster 1: walking, running, and sitting-down-standing-up; cluster 2: hopping; cluster 3: turning). In each cluster, cluster-specific movement synergies were required. Besides the uniqueness of each cluster, similarities were also found among part of the synergies employed by these different clusters, perhaps related to common behavioral goals in these clusters. The mix of synergies shared across the clusters and synergies for specific clusters thus suggests the coexistence of the conservation and augmentation of the kinematic synergies underlying the construction of the diverse and complex motor behaviors. Overall, the categorization presented here yields a quantitative and hierarchical representation of the various lower limb movements, which can serve as a basis for the understanding of the formation mechanisms of human locomotion and motor function assessment and reproduction in related fields.
Collapse
Affiliation(s)
| | | | | | | | - Caihua Xiong
- *Correspondence: Jiejunyi Liang, ; Caihua Xiong,
| |
Collapse
|
12
|
Firouzi V, Davoodi A, Bahrami F, Sharbafi MA. From a biological template model to gait assistance with an exosuit. BIOINSPIRATION & BIOMIMETICS 2021; 16:066024. [PMID: 34624880 DOI: 10.1088/1748-3190/ac2e0d] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/11/2021] [Accepted: 10/08/2021] [Indexed: 06/13/2023]
Abstract
The invention of soft wearable assistive devices, known as exosuits, introduced a new aspect in assisting unimpaired subjects. In this study, we designed and developed an exosuit with compliant biarticular thigh actuators called BATEX. Unlike the conventional method of using rigid actuators in exosuits, the BATEX is made of serial elastic actuators (SEA) resembling artificial muscles. This bioinspired design is complemented by the novel control concept of using the ground reaction force to adjust the artificial muscles' stiffness in the stance phase. By locking the motors in the swing phase, the SEAs will be simplified to passive biarticular springs, which is sufficient for leg swinging. The key concept in our design and control approach is to synthesize human locomotion to develop an assistive device instead of copying human motor control outputs. Analyzing human walking assistance using experiment-based OpenSim simulations demonstrates the advantages of the proposed design and control of BATEX, such as 9.4% reduction in metabolic cost during normal walking condition. This metabolic reduction increases to 10.4% when the subjects carry a 38 kg load. The adaptability of our proposed model-based control to such an unknown condition outperforms the assistance level of the model-free optimal controller. Moreover, increasing the assistive system's efficiency by adjusting the actuator compliance with the force feedback supports our previous findings on the LOPES II exoskeleton.
Collapse
Affiliation(s)
- Vahid Firouzi
- School of Electrical and Computer Engineering, College of Engineering, University of Tehran, Tehran, Iran
| | - Ayoob Davoodi
- School of Electrical and Computer Engineering, College of Engineering, University of Tehran, Tehran, Iran
| | - Fariba Bahrami
- School of Electrical and Computer Engineering, College of Engineering, University of Tehran, Tehran, Iran
| | - Maziar A Sharbafi
- School of Electrical and Computer Engineering, College of Engineering, University of Tehran, Tehran, Iran
- Lauflabor Laboratory, Technische Universität Darmstadt, Darmstadt, Germany
| |
Collapse
|
13
|
Cheng L, Xiong C, Chen W, Liang J, Huang B, Xu X. A portable exotendon assisting hip and knee joints reduces muscular burden during walking. ROYAL SOCIETY OPEN SCIENCE 2021; 8:211266. [PMID: 34737881 PMCID: PMC8564609 DOI: 10.1098/rsos.211266] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/02/2021] [Accepted: 10/08/2021] [Indexed: 06/13/2023]
Abstract
Assistive devices are used to reduce human effort during locomotion with increasing success. More assistance strategies are worth exploring, so we aimed to design a lightweight biarticular device with well-chosen parameters to reduce muscle effort. Based on the experience of previous success, we designed an exotendon to assist in swing leg deceleration. Then we conducted experiments to test the performance of the exotendon with different spring stiffness during walking. With the assistance of the exotendon, peak activation of semitendinosus decreased, with the largest reduction of 12.3% achieved with the highest spring stiffness (p = 0.004). The peak activations of other measured muscles were not significantly different (p = 0.15-0.92). The biological hip extension and knee flexion moments likewise significantly decreased with the spring stiffness (p < 0.01). The joint angle was altered during the assisted phases with decreased hip flexion and knee extension. Meanwhile, the step frequency and the step length were also altered, while the step width remained unaffected. Gait variability changed only in the frontal plane, exhibiting lower step width variability. We conclude that passive devices assisting hip extension and knee flexion can significantly reduce the burden on the hamstring muscles, while the kinematics is easily altered.
Collapse
Affiliation(s)
- Longfei Cheng
- Institute of Rehabilitation and Medical Robotics, State Key Lab of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan, Hubei, People's Republic of China
| | - Caihua Xiong
- Institute of Rehabilitation and Medical Robotics, State Key Lab of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan, Hubei, People's Republic of China
| | - Wenbin Chen
- Institute of Rehabilitation and Medical Robotics, State Key Lab of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan, Hubei, People's Republic of China
| | - Jiejunyi Liang
- Institute of Rehabilitation and Medical Robotics, State Key Lab of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan, Hubei, People's Republic of China
| | - Bo Huang
- Institute of Rehabilitation and Medical Robotics, State Key Lab of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan, Hubei, People's Republic of China
| | - Xiaowei Xu
- Institute of Rehabilitation and Medical Robotics, State Key Lab of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan, Hubei, People's Republic of China
| |
Collapse
|
14
|
Ilami M, Bagheri H, Ahmed R, Skowronek EO, Marvi H. Materials, Actuators, and Sensors for Soft Bioinspired Robots. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2003139. [PMID: 33346386 DOI: 10.1002/adma.202003139] [Citation(s) in RCA: 91] [Impact Index Per Article: 30.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/09/2020] [Revised: 08/15/2020] [Indexed: 05/23/2023]
Abstract
Biological systems can perform complex tasks with high compliance levels. This makes them a great source of inspiration for soft robotics. Indeed, the union of these fields has brought about bioinspired soft robotics, with hundreds of publications on novel research each year. This review aims to survey fundamental advances in bioinspired soft actuators and sensors with a focus on the progress between 2017 and 2020, providing a primer for the materials used in their design.
Collapse
Affiliation(s)
- Mahdi Ilami
- School for Engineering of Matter, Transport & Energy, Arizona State University, Tempe, AZ, 85287, USA
| | - Hosain Bagheri
- School for Engineering of Matter, Transport & Energy, Arizona State University, Tempe, AZ, 85287, USA
| | - Reza Ahmed
- School for Engineering of Matter, Transport & Energy, Arizona State University, Tempe, AZ, 85287, USA
| | - E Olga Skowronek
- School for Engineering of Matter, Transport & Energy, Arizona State University, Tempe, AZ, 85287, USA
| | - Hamid Marvi
- School for Engineering of Matter, Transport & Energy, Arizona State University, Tempe, AZ, 85287, USA
| |
Collapse
|
15
|
Huang B, Xiong C, Chen W, Liang J, Sun BY, Gong X. Common kinematic synergies of various human locomotor behaviours. ROYAL SOCIETY OPEN SCIENCE 2021; 8:210161. [PMID: 33996133 PMCID: PMC8059590 DOI: 10.1098/rsos.210161] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 01/29/2021] [Accepted: 03/23/2021] [Indexed: 06/12/2023]
Abstract
Humans show a variety of locomotor behaviours in daily living, varying in locomotor modes and interaction styles with the external environment. However, how this excellent motor ability is formed, whether there are some invariants underlying various locomotor behaviours and simplifying their generation, and what factors contribute to the invariants remain unclear. Here, we find three common kinematic synergies that form the six joint motions of one lower limb during walking, running, hopping and sitting-down-standing-up (movement variance accounted for greater than 90%), through identifying the coordination characteristics of 36 lower limb motor tasks in diverse environments. This finding supports the notion that humans simplify the generation of various motor behaviours through re-using several basic motor modules, rather than developing entirely new modules for each behaviour. Moreover, a potential link is also found between these synergies and the unique biomechanical characteristics of the human musculoskeletal system (muscular-articular connective architecture and bone shape), and the patterns of inter-joint coordination are consistent with the energy-saving mechanism in locomotion by using biarticular muscles as efficient mechanical energy transducers between joints. Altogether, our work helps understand the formation mechanisms of human locomotion from a holistic viewpoint and evokes inspirations for the development of artificial limbs imitating human motor ability.
Collapse
Affiliation(s)
- Bo Huang
- Institute of Robotics Research (IR2), State Key Laboratory of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan, Hubei 430074, People's Republic of China
| | - Caihua Xiong
- Institute of Robotics Research (IR2), State Key Laboratory of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan, Hubei 430074, People's Republic of China
| | - Wenbin Chen
- Institute of Robotics Research (IR2), State Key Laboratory of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan, Hubei 430074, People's Republic of China
| | - Jiejunyi Liang
- Institute of Robotics Research (IR2), State Key Laboratory of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan, Hubei 430074, People's Republic of China
| | - Bai-Yang Sun
- Institute of Robotics Research (IR2), State Key Laboratory of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan, Hubei 430074, People's Republic of China
| | - Xuan Gong
- Institute of Robotics Research (IR2), State Key Laboratory of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan, Hubei 430074, People's Republic of China
| |
Collapse
|
16
|
Zhou T, Xiong C, Zhang J, Chen W, Huang X. Regulating Metabolic Energy Among Joints During Human Walking Using a Multiarticular Unpowered Exoskeleton. IEEE Trans Neural Syst Rehabil Eng 2021; 29:662-672. [PMID: 33690121 DOI: 10.1109/tnsre.2021.3065389] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Abstract
Researchers have found that the walking economy can be enhanced by recycling ankle metabolic energy using an unpowered ankle exoskeleton. However, how to regulate multiarticular energy to enhance the overall energy efficiency of humans during walking remains a challenging problem, as multiarticular passive assistance is more likely to interfere with the human body's natural biomechanics. Here we show that the metabolic energy of the hip and knee musculature can be regulated to a more energy-effective direction using a multiarticular unpowered exoskeleton that recycles negative mechanical energy of the knee joint in the late swing phase and transfers the stored energy to assist the hip extensors in performing positive mechanical work in the stance phase. The biarticular spring-clutch mechanism of the exoskeleton performs a complementary energy recycling and energy transfer function for hip and knee musculature. Through the phased regulation of the hip and knee metabolic energy, the target muscle activities decreased during the whole assistive period of the exoskeleton, which was the direct reason for 8.6 ± 1.5% (mean ± s.e.m) reduction in metabolic rate compared with that of walking without the exoskeleton. The proposed unpowered exoskeleton enhanced the user's multiarticular energy efficiency, which equals improving musculoskeletal structure by adding a complementary loop for efficient energy recycling and energy transfer.
Collapse
|
17
|
Effects of different initial foot positions on kinematics, muscle activation patterns, and postural control during a sit-to-stand in younger and older adults. J Biomech 2021; 117:110251. [PMID: 33493710 DOI: 10.1016/j.jbiomech.2021.110251] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/14/2020] [Revised: 12/19/2020] [Accepted: 01/03/2021] [Indexed: 11/21/2022]
Abstract
BACKGROUND Performing a sit-to-stand (STS) can be a challenging task for older adults because of age-related declines in neuromuscular strength and coordination. We investigated the effects of different initial foot positions (IFPs) on kinematics, muscle activation patterns, and balance control during a STS in younger and older adults. METHODS Ten younger and ten older healthy adults participated in this study. Four symmetric IFPs were studied: (1) reference (REF), (2) toes-out with heels together (TOHT), (3) toes-out (TO), and (4) Wide. Lower-extremity muscle activation patterns and kinetic and kinematic data in the sagittal and frontal planes were measured. RESULTS The trunk forward-tilt angle and hip extension torque during uprising were smaller in TO and Wide for both age groups. Postural sway and center of pressure sway area were smallest in TO after completion of uprising with no difference between age groups. Adductor longus and gluteus medius activity was greater in TO than in the other IFPs, and older adults activated these muscles to a greater degree than younger adults. CONCLUSION Smaller trunk flexion angles with greater activation of the hip abductor and adductor muscles in TO contributed to improving postural stability during the STS. SIGNIFICANCE STS training with a toes-out foot position could be an effective rehabilitation strategy for older adults to strengthen hip muscles that control medio-lateral balance required for balance during a STS.
Collapse
|
18
|
EEG-Based EMG Estimation of Shoulder Joint for the Power Augmentation System of Upper Limbs. Symmetry (Basel) 2020. [DOI: 10.3390/sym12111851] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022] Open
Abstract
Brain–Machine Interfaces (BMIs) have attracted much attention in recent decades, mainly for their applications involving severely disabled people. Recently, research has been directed at enhancing the ability of healthy people by connecting their brains to external devices. However, there are currently no successful research reports focused on robotic power augmentation using electroencephalography (EEG) signals for the shoulder joint. In this study, a method is proposed to estimate the shoulder’s electromyography (EMG) signals from EEG signals based on the concept of a virtual flexor–extensor muscle. In addition, the EMG signal of the deltoid muscle is used as the virtual EMG signal to establish the EMG estimation model and evaluate the experimental results. Thus, the shoulder’s power can be augmented by estimated virtual EMG signals for the people wearing an EMG-based power augmentation exoskeleton robot. The estimated EMG signal is expressed via a linear combination of the features of EEG signals extracted by Independent Component Analysis, Short-time Fourier Transform, and Principal Component Analysis. The proposed method was verified experimentally, and the average of the estimation correlation coefficient across different subjects was 0.78 (±0.037). These results demonstrate the feasibility and potential of using EEG signals to provide power augmentation through BMI technology.
Collapse
|
19
|
Schumacher C, Sharbafi M, Seyfarth A, Rode C. Biarticular muscles in light of template models, experiments and robotics: a review. J R Soc Interface 2020; 17:20180413. [PMID: 32093540 PMCID: PMC7061696 DOI: 10.1098/rsif.2018.0413] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/11/2019] [Accepted: 01/31/2020] [Indexed: 11/25/2022] Open
Abstract
Leg morphology is an important outcome of evolution. A remarkable morphological leg feature is the existence of biarticular muscles that span adjacent joints. Diverse studies from different fields of research suggest a less coherent understanding of the muscles' functionality in cyclic, sagittal plane locomotion. We structured this review of biarticular muscle function by reflecting biomechanical template models, human experiments and robotic system designs. Within these approaches, we surveyed the contribution of biarticular muscles to the locomotor subfunctions (stance, balance and swing). While mono- and biarticular muscles do not show physiological differences, the reviewed studies provide evidence for complementary and locomotor subfunction-specific contributions of mono- and biarticular muscles. In stance, biarticular muscles coordinate joint movements, improve economy (e.g. by transferring energy) and secure the zig-zag configuration of the leg against joint overextension. These commonly known functions are extended by an explicit role of biarticular muscles in controlling the angular momentum for balance and swing. Human-like leg arrangement and intrinsic (compliant) properties of biarticular structures improve the controllability and energy efficiency of legged robots and assistive devices. Future interdisciplinary research on biarticular muscles should address their role for sensing and control as well as non-cyclic and/or non-sagittal motions, and non-static moment arms.
Collapse
Affiliation(s)
- C. Schumacher
- Lauflabor Locomotion Laboratory, Centre for Cognitive Science, Institute of Sport Science, Technische Universität Darmstadt, Darmstadt, Germany
| | - M. Sharbafi
- Lauflabor Locomotion Laboratory, Centre for Cognitive Science, Institute of Sport Science, Technische Universität Darmstadt, Darmstadt, Germany
| | - A. Seyfarth
- Lauflabor Locomotion Laboratory, Centre for Cognitive Science, Institute of Sport Science, Technische Universität Darmstadt, Darmstadt, Germany
| | - C. Rode
- Motion and Exercise Science, University of Stuttgart, Stuttgart, Germany
| |
Collapse
|
20
|
Schumacher C, Berry A, Lemus D, Rode C, Seyfarth A, Vallery H. Biarticular muscles are most responsive to upper-body pitch perturbations in human standing. Sci Rep 2019; 9:14492. [PMID: 31601860 PMCID: PMC6787002 DOI: 10.1038/s41598-019-50995-3] [Citation(s) in RCA: 20] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/17/2019] [Accepted: 09/23/2019] [Indexed: 11/08/2022] Open
Abstract
Balancing the upper body is pivotal for upright and efficient gait. While models have identified potentially useful characteristics of biarticular thigh muscles for postural control of the upper body, experimental evidence for their specific role is lacking. Based on theoretical findings, we hypothesised that biarticular muscle activity would increase strongly in response to upper-body perturbations. To test this hypothesis, we used a novel Angular Momentum Perturbator (AMP) that, in contrast to existing methods, perturbs the upper-body posture with only minimal effect on Centre of Mass (CoM) excursions. The impulse-like AMP torques applied to the trunk of subjects resulted in upper-body pitch deflections of up to 17° with only small CoM excursions below 2 cm. Biarticular thigh muscles (biceps femoris long head and rectus femoris) showed the strongest increase in muscular activity (mid- and long-latency reflexes, starting 100 ms after perturbation onset) of all eight measured leg muscles which highlights the importance of biarticular muscles for restoring upper-body balance. These insights could be used for improving technological aids like rehabilitation or assistive devices, and the effectiveness of physical training for fall prevention e.g. for elderly people.
Collapse
Affiliation(s)
- Christian Schumacher
- Lauflabor Locomotion Laboratory, Institute of Sport Science, Centre for Cognitive Science, Technische Universität Darmstadt, Darmstadt, 64289, Germany.
- Delft Biorobotics Lab, BioMechanical Engineering, Delft University of Technology, Delft, 2628 CD, The Netherlands.
| | - Andrew Berry
- Delft Biorobotics Lab, BioMechanical Engineering, Delft University of Technology, Delft, 2628 CD, The Netherlands
| | - Daniel Lemus
- Delft Biorobotics Lab, BioMechanical Engineering, Delft University of Technology, Delft, 2628 CD, The Netherlands
| | - Christian Rode
- Friedrich-Schiller-Universität Jena, Institute of Zoology and Evolutionary Research, Jena, 07743, Germany
| | - André Seyfarth
- Lauflabor Locomotion Laboratory, Institute of Sport Science, Centre for Cognitive Science, Technische Universität Darmstadt, Darmstadt, 64289, Germany
| | - Heike Vallery
- Delft Biorobotics Lab, BioMechanical Engineering, Delft University of Technology, Delft, 2628 CD, The Netherlands
| |
Collapse
|
21
|
Ming T, Jin B, Song J, Luo H, Du R, Ding Y. 3D computational models explain muscle activation patterns and energetic functions of internal structures in fish swimming. PLoS Comput Biol 2019; 15:e1006883. [PMID: 31487282 PMCID: PMC6748450 DOI: 10.1371/journal.pcbi.1006883] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/18/2019] [Revised: 09/17/2019] [Accepted: 07/22/2019] [Indexed: 11/18/2022] Open
Abstract
How muscles are used is a key to understanding the internal driving of fish swimming. However, the underlying mechanisms of some features of the muscle activation patterns and their differential appearance in different species are still obscure. In this study, we explain the muscle activation patterns by using 3D computational fluid dynamics models coupled to the motion of fish with prescribed deformation and examining the torque and power required along the fish body with two primary swimming modes. We find that the torque required by the hydrodynamic forces and body inertia exhibits a wave pattern that travels faster than the curvature wave in both anguilliform and carangiform swimmers, which can explain the traveling wave speeds of the muscle activations. Notably, intermittent negative power (i.e., power delivered by the fluid to the body) on the posterior part, along with a timely transfer of torque and energy by tendons, explains the decrease in the duration of muscle activation towards the tail. The torque contribution from the body elasticity further clarifies the wave speed increase or the reverse of the wave direction of the muscle activation on the posterior part of a carangiform swimmer. For anguilliform swimmers, the absence of the aforementioned changes in the muscle activation on the posterior part is consistent with our torque prediction and the absence of long tendons from experimental observations. These results provide novel insights into the functions of muscles and tendons as an integral part of the internal driving system, especially from an energy perspective, and they highlight the differences in the internal driving systems between the two primary swimming modes. For undulatory swimming, fish form posteriorly traveling waves of body bending by activating their muscles sequentially along the body. However, experimental observations have shown that the muscle activation wave does not simply match the bending wave. Researchers have previously computed the torque required for muscles along the body based on classic hydrodynamic theories and explained the higher wave speed of the muscle activation compared to the curvature wave. However, the origins of other features of the muscle activation pattern and their variation among different species are still obscure after decades of research. In this study, we use 3D computational fluid dynamics models to compute the spatiotemporal distributions of both the torque and power required for eel-like and mackerel-like swimming. By examining both the torque and power patterns and considering the energy transfer, storage, and release by tendons and body viscoelasticity, we can explain not only the features and variations in the muscle activation patterns as observed from fish experiments but also how tendons and body elasticity save energy. We provide a mechanical picture in which the body shape, body movement, muscles, tendons, and body elasticity of a mackerel (or similar) orchestrate to make swimming efficient.
Collapse
Affiliation(s)
- Tingyu Ming
- Beijing Computational Science Research Center, Haidian District, Beijing, China
| | - Bowen Jin
- Beijing Computational Science Research Center, Haidian District, Beijing, China
| | - Jialei Song
- Beijing Computational Science Research Center, Haidian District, Beijing, China
- Department of Mechanical and Automation Engineering, Chinese University of Hong Kong, Hong Kong SAR, China
| | - Haoxiang Luo
- Department of Mechanical Engineering, Vanderbilt University, Nashville, Tennessee, United States of America
| | - Ruxu Du
- Department of Mechanical and Automation Engineering, Chinese University of Hong Kong, Hong Kong SAR, China
| | - Yang Ding
- Beijing Computational Science Research Center, Haidian District, Beijing, China
- * E-mail:
| |
Collapse
|
22
|
Kuznetsov AN. A theorem of target points for the ground reaction force in a planar serial-linked walking limb. BIOINSPIRATION & BIOMIMETICS 2018; 13:066010. [PMID: 30255849 DOI: 10.1088/1748-3190/aae44f] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
An important energy expense in the legged locomotion of both animals and robots is the mechanical antagonism between muscles/actuators, which is the positive mechanical work of some muscles opposed by the simultaneous negative work of the others. One known way to minimize the mechanical antagonism is the proper employment of the redundant degrees of freedom of the limb. Here, I present and analyze a generalized model of a planar serial-linked limb composed of any number of segments and conclude that the minimization of the inter-actuator antagonism requires fixation of all the joint angles except the two defined by simple geometric considerations. So, regardless of the number of joints, the limb should optimally act as a two-joint system. Which of the redundant joints to fix or move depends on the instantaneous position of the joints relative to the vertical line through the center of the foot contact with the ground. Subsequently, for the first time, I pose and solve the following problem: how to eliminate the inter-actuator antagonism by the adjustment of the horizontal component of the ground reaction force. The solution is that, during the contact phase, the ground reaction force vector should be redirected so as to maintain alignment with the limb joints in the order in which they attain the smallest angular deflection from the vertical line through the foot. As the joints pass the vertical line through the point of limb contact with the ground one by one, abrupt changes of the horizontal ground force component from positive to negative should occur. Mammals cannot follow this algorithm exactly due to muscular actuator limitations and they tend to align the ground reaction force with some compromise target point above the hip or scapula. The suggested principles of the optimal choice of redundant degrees of freedom and direction of the ground reaction force can be implemented in robotics to achieve a lower cost of transport than is known for animals.
Collapse
Affiliation(s)
- Alexander N Kuznetsov
- Borissiak Paleontological Institute, Russian Academy of Sciences, Moscow 117647, Russia
| |
Collapse
|
23
|
Malcolm P, Galle S, Derave W, De Clercq D. Bi-articular Knee-Ankle-Foot Exoskeleton Produces Higher Metabolic Cost Reduction than Weight-Matched Mono-articular Exoskeleton. Front Neurosci 2018; 12:69. [PMID: 29551959 PMCID: PMC5841020 DOI: 10.3389/fnins.2018.00069] [Citation(s) in RCA: 43] [Impact Index Per Article: 7.2] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/07/2017] [Accepted: 01/29/2018] [Indexed: 11/13/2022] Open
Abstract
The bi-articular m. gastrocnemius and the mono-articular m. soleus have different and complementary functions during walking. Several groups are starting to use these biological functions as inspiration to design prostheses with bi-articular actuation components to replace the function of the m. gastrocnemius. Simulation studies indicate that a bi-articular configuration and spring that mimic the m. gastrocnemius could be beneficial for orthoses or exoskeletons. Our aim was to test the effect of a bi-articular and spring configuration that mimics the m. gastrocnemius and compare this to a no-spring and mono-articular configuration. We tested nine participants during walking with knee-ankle-foot exoskeletons with dorsally mounted pneumatic muscle actuators. In the bi-articular plus spring condition the pneumatic muscles were attached to the thigh segment with an elastic cord. In the bi-articular no-spring condition the pneumatic muscles were also attached to the thigh segment but with a non-elastic cord. In the mono-articular condition the pneumatic muscles were attached to the shank segment. We found the highest reduction in metabolic cost of 13% compared to walking with the exoskeleton powered-off in the bi-articular plus spring condition. Possible explanations for this could be that the exoskeleton delivered the highest total positive work in this condition at the ankle and the knee and provided more assistance during the isometric phase of the biological plantarflexors. As expected we found that the bi-articular conditions reduced m. gastrocnemius EMG more than the mono-articular condition but this difference was not significant. We did not find that the mono-articular condition reduces the m. soleus EMG more than the bi-articular conditions. Knowledge of specific effects of different exoskeleton configurations on metabolic cost and muscle activation could be useful for providing customized assistance for specific gait impairments.
Collapse
Affiliation(s)
- Philippe Malcolm
- Department of Biomechanics, Center for Research in Human Movement Variability, University of Nebraska Omaha, Omaha, NE, United States
| | - Samuel Galle
- Department of Movement and Sports Sciences, Ghent University, Ghent, Belgium
| | - Wim Derave
- Department of Movement and Sports Sciences, Ghent University, Ghent, Belgium
| | - Dirk De Clercq
- Department of Movement and Sports Sciences, Ghent University, Ghent, Belgium
| |
Collapse
|
24
|
Schmidt K, Duarte JE, Grimmer M, Sancho-Puchades A, Wei H, Easthope CS, Riener R. The Myosuit: Bi-articular Anti-gravity Exosuit That Reduces Hip Extensor Activity in Sitting Transfers. Front Neurorobot 2017; 11:57. [PMID: 29163120 PMCID: PMC5663860 DOI: 10.3389/fnbot.2017.00057] [Citation(s) in RCA: 77] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/17/2017] [Accepted: 10/12/2017] [Indexed: 11/13/2022] Open
Abstract
Muscle weakness-which can result from neurological injuries, genetic disorders, or typical aging-can affect a person's mobility and quality of life. For many people with muscle weakness, assistive devices provide the means to regain mobility and independence. These devices range from well-established technology, such as wheelchairs, to newer technologies, such as exoskeletons and exosuits. For assistive devices to be used in everyday life, they must provide assistance across activities of daily living (ADLs) in an unobtrusive manner. This article introduces the Myosuit, a soft, wearable device designed to provide continuous assistance at the hip and knee joint when working with and against gravity in ADLs. This robotic device combines active and passive elements with a closed-loop force controller designed to behave like an external muscle (exomuscle) and deliver gravity compensation to the user. At 4.1 kg (4.6 kg with batteries), the Myosuit is one of the lightest untethered devices capable of delivering gravity support to the user's knee and hip joints. This article presents the design and control principles of the Myosuit. It describes the textile interface, tendon actuators, and a bi-articular, synergy-based approach for continuous assistance. The assistive controller, based on bi-articular force assistance, was tested with a single subject who performed sitting transfers, one of the most gravity-intensive ADLs. The results show that the control concept can successfully identify changes in the posture and assist hip and knee extension with up to 26% of the natural knee moment and up to 35% of the knee power. We conclude that the Myosuit's novel approach to assistance using a bi-articular architecture, in combination with the posture-based force controller, can effectively assist its users in gravity-intensive ADLs, such as sitting transfers.
Collapse
Affiliation(s)
- Kai Schmidt
- Sensory-Motor Systems Lab, Department of Health Sciences and Technology, Institute of Robotics and Intelligent Systems, ETH Zurich, Zurich, Switzerland
- Spinal Cord Injury Center, University Hospital Balgrist, University of Zurich, Zurich, Switzerland
| | - Jaime E. Duarte
- Sensory-Motor Systems Lab, Department of Health Sciences and Technology, Institute of Robotics and Intelligent Systems, ETH Zurich, Zurich, Switzerland
- Spinal Cord Injury Center, University Hospital Balgrist, University of Zurich, Zurich, Switzerland
| | - Martin Grimmer
- Sensory-Motor Systems Lab, Department of Health Sciences and Technology, Institute of Robotics and Intelligent Systems, ETH Zurich, Zurich, Switzerland
- Spinal Cord Injury Center, University Hospital Balgrist, University of Zurich, Zurich, Switzerland
| | - Alejandro Sancho-Puchades
- Sensory-Motor Systems Lab, Department of Health Sciences and Technology, Institute of Robotics and Intelligent Systems, ETH Zurich, Zurich, Switzerland
- Spinal Cord Injury Center, University Hospital Balgrist, University of Zurich, Zurich, Switzerland
| | - Haiqi Wei
- Sensory-Motor Systems Lab, Department of Health Sciences and Technology, Institute of Robotics and Intelligent Systems, ETH Zurich, Zurich, Switzerland
| | - Chris S. Easthope
- Spinal Cord Injury Center, University Hospital Balgrist, University of Zurich, Zurich, Switzerland
| | - Robert Riener
- Sensory-Motor Systems Lab, Department of Health Sciences and Technology, Institute of Robotics and Intelligent Systems, ETH Zurich, Zurich, Switzerland
- Spinal Cord Injury Center, University Hospital Balgrist, University of Zurich, Zurich, Switzerland
| |
Collapse
|