An electrospun triphasic nanofibrous scaffold for bone tissue engineering

Preparation and in vitro evaluation of cell adhesion and long-term proliferation of stem cells cultured on silibinin co-embedded PLGA/Collagen electrospun composite nanofibers

The present research aims to evaluate the efficacy of Silibinin-loaded mesoporous silica nanoparticles (Sil@MSNs) immobilized into polylactic-co-glycolic acid/Collagen (PLGA/Col) nanofibers on the in vitro proliferation of adipose-derived stem cells (ASCs) and cellular senescence. Here, the fabricated electrospun PLGA/Col composite scaffolds were coated with Sil@MSNs and their physicochemical properties were examined by FTIR, FE-SEM, and TGA. The growth, viability and proliferation of ASCs were investigated using various biological assays including PicoGreen, MTT, and RT-PCR after 21 days. The proliferation and adhesion of ASCs were supported by the biological and mechanical characteristics of the Sil@MSNs PLGA/Col composite scaffolds, according to FE- SEM. PicoGreen and cytotoxicity analysis showed an increase in the rate of proliferation and metabolic activity of hADSCs after 14 and 21 days, confirming the initial and controlled release of Sil from nanofibers. Gene expression analysis further confirmed the increased expression of stemness markers as well as hTERT and telomerase in ASCs seeded on Sil@MSNs PLGA/Col nanofibers compared to the control group. Ultimately, the findings of the present study introduced Sil@MSNs PLGA/Col composite scaffolds as an efficient platform for long-term proliferation of ASCs in tissue engineering.

Nanomechanical Mapping of Three Dimensionally Printed Poly-ε-Caprolactone Single Microfibers at the Cell Scale for Bone Tissue Engineering Applications

Poly-ε-caprolactone (PCL) has been widely used in additive manufacturing for the construction of scaffolds for bone tissue engineering. However, its use is limited by its lack of bioactivity and inability to induce cell adhesion, hence limiting bone tissue regeneration. Biomimicry is strongly influenced by the dynamics of cell-substrate interaction. Thus, characterizing scaffolds at the cell scale could help to better understand the relationship between surface mechanics and biological response. We conducted atomic force microscopy-based nanoindentation on 3D-printed PCL fibers of ~300 µm thickness and mapped the near-surface Young's modulus at loading forces below 50 nN. In this non-disruptive regime, force mapping did not show clear patterns in the spatial distribution of moduli or a relationship with the topographic asperities within a given region. Remarkably, we found that the average modulus increased linearly with the logarithm of the strain rate. Finally, a dependence of the moduli on the history of nanoindentation was demonstrated on locations of repeated nanoindentations, likely due to creep phenomena capable of hindering viscoelasticity. Our findings can contribute to the rational design of scaffolds for bone regeneration that are capable of inducing cell adhesion and proliferation. The methodologies described are potentially applicable to various tissue-engineered biopolymers.

Fabrication of PCL/CMARX/GO Composite Nanofibrous Mats for Dye Adsorption: Wastewater Treatment

The effluents of industrial wastewater contain several toxic organic and inorganic pollutants that may contaminate clean and freshwater sources if untreated or poorly treated. These toxic pollutants include colors; hazardous compounds; surfactants; cosmetics; agrochemicals; pharmaceutical by-products; and agricultural, pharmaceutical, and medical contaminants. Treating wastewater has become a global problem. Many projects have been started in the last two decades to treat wastewater, resultant water pollution, and associated waste management problems. Adsorbants based on graphene oxide (GO) are viable wastewater treatment materials due to their adaptability, photocatalytic action, and capacity for self-assembly. Here, we report the fabrication of nanofibrous mats from polycaprolactone (PCL), carboxymethyl arabinoxylan (CMARX), and carboxyl-functionalized-graphene oxide using an electrospinning technique. The silver nanoparticles were loaded onto the mat to enhance their photocatalytic activity. These mats were characterized using different techniques, including Fourier transform infrared (FTIR), scanning electron microscope (SEM), and transmission electron microscope (TEM). The water contact angles were used to study their hydrophilic and hydrophobic behavior. The Langmuir isotherm model and adsorption kinetics were studied to evaluate their adsorption capabilities against methylene blue (MB). Sample 2 followed the Langmuir isotherm model (R² = 0.9939). Adsorption kinetics exhibited pseudo-second order behavior (R² = 0.9978) due to their maximum correlation coefficient values. MB has excellent adsorption at room temperature and the formation of the monolayer at the surface of the adsorption mat. An enhanced PO₄^3- and MB adsorption was observed, providing recyclability up to 4-5 times. Hence, the fabricated nanofibrous mat would be a potential candidate for more effective wastewater treatment applications.

On the Various Numerical Techniques for the Optimization of Bone Scaffold

As the application of bone scaffolds becomes more and more widespread, the requirements for the high performance of bone scaffolds are also increasing. The stiffness and porosity of porous structures can be adjusted as needed, making them good candidates for repairing damaged bone tissues. However, the development of porous bone structures is limited by traditional manufacturing methods. Today, the development of additive manufacturing technology has made it very convenient to manufacture bionic porous bone structures as needed. In the present paper, the current state-of-the-art optimization techniques for designing the scaffolds and the settings of different optimization methods are introduced. Additionally, various design methods for bone scaffolds are reviewed. Furthermore, the challenges in designing high performance bone scaffolds and the future developments of bone scaffolds are also presented.

Polycaprolactone-co-polylactic acid nanofiber scaffold in combination with 5-azacytidine and transforming growth factor-β to induce cardiomyocyte differentiation of adipose-derived mesenchymal stem cells

Adipose-derived mesenchymal stem cells (Ad-MSCs) are promising candidates for cardiac repair/regeneration. The application of copolymer nanoscaffolds has received great attention in tissue engineering to support differentiation and functional tissue organization toward effective tissue regeneration. The objective of the current study was to develop functional and bioactive scaffolds by combining polycaprolactone (PCL) and polylactic acid (PLA) for cardiomyocyte differentiation of human Ad-MSC (hAd-MSCs) in the absence or presence of 5-azacytidine and transforming growth factor-β (TGF-β). To that end, the human MSCs were extracted from human adipose tissue (AD). The cardiomyocyte differentiation potency of hAd-MSCs was evaluated on the novel synthetic PCL/PLA nanofiber scaffolds prepared in the absence and presence of 5-azacytidine and TGF-β supplements. A PCL/PLA nanofibrous scaffold was fabricated using the electrospinning method and its nanotopography and porous structure were characterized using scanning electron microscopy. In addition, the attachment of hAd-MSCs on the PCL/PLA scaffolds was semiquantitatively investigated. Compared with other treatments, the PCL/PLA nanofibrous scaffold supplemented with both 5-azacytidine and TGF-β was observed to differentiate hAd-MSCs into cardiomyocytes at Day 21 as evidenced by real-time PCR for cardiac-specific genes including cardiac troponin I (cTnI), GATA4, MYH7, and NKX2.5. In addition, flow cytometric analysis of cTnI-positive cells demonstrated that the cardiomyocyte differentiation of hAd-MSCs was more efficient on the PCL/PLA nanofibrous scaffold supplemented with both 5-azacytidine and TGF-β than it was in the other treatment groups. Generally speaking, the results show that PCL/PLA nanofibrous scaffolds may be applied as a platform for efficient differentiation of hAd-MSCs into functional cardiomyocytes.

Mesoporous silica incorporated PCL/Curcumin nanofiber for wound healing application

Electrospinning, a recent fast-emerging technique highly applicable in the production of nanofibers has gained vast recognition owing to its explicit applications in various domains. Amongst which, the production of nanoscaffolds for wound healing applications has been focused recently due to advantages over conventional wound healing methods. In the present research, a composite nanoscaffold comprising SBA-15 (Santa Barbara Amorphous), amine functionalized SBA-15 polycaprolactone (PCL) and curcumin was investigated for its potentiality in wound healing therapeutics. The high biocompatibility and cell adhesion of amine functionalized SBA-15 and the widely explored antimicrobial properties of curcumin added benefit for the wound healing target. The prepared highly interconnected electrospun fibers with porous structure were characterized through various studies such as FTIR, XRD, SEM and EDAX. Further, antibacterial studies against both Gram positive (Bacillus subtilis) and Gram negative (Escherichia coli) strains revealed an improved zone of inhibition. Major invitro studies such as cell migration, proliferation, bio-compatibility was experimented through cell adhesion and live and dead assay using Swiss 3T6 cell lines. In vivo studies on female Wister rats using the fabricated nanofibers incorporated with curcumin and amine functionalized SBA-15 showed 99% scar-less wound healing within 21 days. Re-epithelization of tissue, collagen deposition and formation of granulation tissue were observed from the results of Hematoxylin-Eosin and Masson's tri-chrome staining. From the observations, it can be concluded that the fabricated nanoscaffold could be an effective substrate for wound healing therapeutics.

Conductive Polymeric-Based Electroactive Scaffolds for Tissue Engineering Applications: Current Progress and Challenges from Biomaterials and Manufacturing Perspectives

The practice of combining external stimulation therapy alongside stimuli-responsive bio-scaffolds has shown massive potential for tissue engineering applications. One promising example is the combination of electrical stimulation (ES) and electroactive scaffolds because ES could enhance cell adhesion and proliferation as well as modulating cellular specialization. Even though electroactive scaffolds have the potential to revolutionize the field of tissue engineering due to their ability to distribute ES directly to the target tissues, the development of effective electroactive scaffolds with specific properties remains a major issue in their practical uses. Conductive polymers (CPs) offer ease of modification that allows for tailoring the scaffold's various properties, making them an attractive option for conductive component in electroactive scaffolds. This review provides an up-to-date narrative of the progress of CPs-based electroactive scaffolds and the challenge of their use in various tissue engineering applications from biomaterials perspectives. The general issues with CP-based scaffolds relevant to its application as electroactive scaffolds were discussed, followed by a more specific discussion in their applications for specific tissues, including bone, nerve, skin, skeletal muscle and cardiac muscle scaffolds. Furthermore, this review also highlighted the importance of the manufacturing process relative to the scaffold's performance, with particular emphasis on additive manufacturing, and various strategies to overcome the CPs' limitations in the development of electroactive scaffolds.

Fabrication techniques involved in developing the composite scaffolds PCL/HA nanoparticles for bone tissue engineering applications

A fine-tuned combination of scaffolds, biomolecules, and mesenchymal stem cells (MSCs) is used in tissue engineering to restore the function of injured bone tissue and overcome the complications associated with its regeneration. For two decades, biomaterials have attracted much interest in mimicking the native extracellular matrix of bone tissue. To this aim, several approaches based on biomaterials combined with MSCs have been amply investigated. Recently, hydroxyapatite (HA) nanoparticles have been incorporated with polycaprolactone (PCL) matrix as a suitable substitute for bone tissue engineering applications. This review article aims at providing a brief overview on PCL/HA composite scaffold fabrication techniques such as sol-gel, rapid prototyping, electro-spinning, particulate leaching, thermally induced phase separation, and freeze-drying, as suitable approaches for tailoring morphological, mechanical, and biodegradability properties of the scaffolds for bone tissues. Among these methods, the 3D plotting method shows improvements in pore architecture (pore size of ≥600 µm and porosity of 92%), mechanical properties (higher than 18.38 MPa), biodegradability, and good bioactivity in bone tissue regeneration.

Tissue-specific mesenchymal stem cell-dependent osteogenesis in highly porous chitosan-based bone analogs

Among conventional fabrication techniques, freeze‐drying process has widely been investigated for polymeric implants. However, the understanding of the stem cell progenitor‐dependent cell functionality modulation and quantitative analysis of early osseointegration of highly porous scaffolds have not been explored. Here, we developed a novel, highly porous, multimaterial composite, chitosan/hydroxyapatite/polycaprolactone (CHT/HA/PCL). The in vitro studies have been performed using mesenchymal stem cells (MSCs) from three tissue sources: human bone marrow‐derived MSCs (BM‐MSCs), adipose‐derived MSCs (AD‐MSCs), and Wharton's jelly‐derived MSCs (WJ‐MSCs). Although cell attachment and metabolic activity [3‐4,5‐dimethylthiazol‐2yl‐(2,5 diphenyl‐2H‐tetrazoliumbromide) assay] were ore enhanced in WJ‐MSC‐laden CHT/HA/PCL composites, scanning electron microscopy, real‐time gene expression (alkaline phosphatase [ALP], collagen type I [Col I], osteocalcin [OCN], and bone morphogenetic protein 4 [BMP‐4]), and immunostaining (COL I, β‐CATENIN, OCN, and SCLEROSTIN [SOST]) demonstrated pronounced osteogenesis with terminal differentiation on BM‐MSC‐laden CHT/HA/PCL composites only. The enhanced cell functionality on CHT/HA/PCL composites was explained in terms of interplay among the surface properties and the optimal source of MSCs. In addition, osteogenesis in rat tibial model over 6 weeks confirmed a better ratio of bone volume to the total volume for BM‐MSC‐laden composites over scaffold‐only and defect‐only groups. The clinically conformant combination of 3D porous architecture with pore sizes varying in the range of 20 to 200  μm together with controlled in vitro degradation and early osseointegration establish the potential of CHT/HA/PCL composite as a potential cancellous bone analog.

Design and comprehensive assessment of a biomimetic tri-layer tubular scaffold via biodegradable polymers for vascular tissue engineering applications

Considering the structural complexity of the native artery wall and the limitations of current treatment strategies, developing a biomimetic tri-layer tissue-engineered vascular graft is a major developmental direction of vascular tissue regeneration. Biodegradable polymers exhibit adequate mechanical characteristics and feasible operability, showing potential prospects in the construction of tissue engineering scaffold. Herein, we present a bio-inspired tri-layer tubular graft using biodegradable polymers to simulate natural vascular architecture. The inner layer made of polycaprolactone (PCL) nanofiber possesses high tensile strength and contributed to endothelial cell adhesion and proliferation. The middle layer consisted of poly(lactic-co-glycolide) (PLGA) with a three-dimensional porous structure is appropriate for vascular smooth muscle cells (SMCs) penetration. The polyurethane (PU) was selected to be the outer layer, aiming to hold the entire tubular structure, suggesting superior mechanical properties and ideal biocompatibility. Adhesion between independent layers is achieved by thermal crosslinking. The compliance, burst pressure and suture retention force of the tubular scaffold were 2.50 ± 1.60%, 2737.73 ± 583.41 mmHg and 13.06 ± 1.89 N, respectively. The in vivo study of subcutaneous implantation for 8 weeks demonstrated the biomimetic tri-layer vascular graft could maintain intimal integrity, cell infiltration, collagen deposition and scaffold biodegradation. Overall, the biomimetic tri-layer vascular graft promises to be a potential candidate for vascular replacement and regeneration.

Multimaterial Dual Gradient Three-Dimensional Printing for Osteogenic Differentiation and Spatial Segregation

In this study of three-dimensional (3D) printed composite β-tricalcium phosphate (β-TCP)-/hydroxyapatite/poly(ɛ-caprolactone)-based constructs, the effects of vertical compositional ceramic gradients and architectural porosity gradients on the osteogenic differentiation of rabbit bone marrow-derived mesenchymal stem cells (MSCs) were investigated. Specifically, three different concentrations of β-TCP (0, 10, and 20 wt%) and three different porosities (33% ± 4%, 50% ± 4%, and 65% ± 3%) were examined to elucidate the contributions of chemical and physical gradients on the biochemical behavior of MSCs and the mineralized matrix production within a 3D culture system. By delaminating the constructs at the gradient transition point, the spatial separation of cellular phenotypes could be specifically evaluated for each construct section. Results indicated that increased concentrations of β-TCP resulted in upregulation of osteogenic markers, including alkaline phosphatase activity and mineralized matrix development. Furthermore, MSCs located within regions of higher porosity displayed a more mature osteogenic phenotype compared to MSCs in lower porosity regions. These results demonstrate that 3D printing can be leveraged to create multiphasic gradient constructs to precisely direct the development and function of MSCs, leading to a phenotypic gradient. Impact Statement In this study, three-dimensional (3D) printed ceramic/polymeric constructs containing discrete vertical gradients of both composition and porosity were fabricated to precisely control the osteogenic differentiation of mesenchymal stem cells. By making simple alterations in construct architecture and composition, constructs containing heterogenous populations of cells were generated, where gradients in scaffold design led to corresponding gradients in cellular phenotype. The study demonstrates that 3D printed multiphasic composite constructs can be leveraged to create complex heterogeneous tissues and interfaces.

Fibronectin Functionalized Electrospun Fibers by Using Benign Solvents: Best Way to Achieve Effective Functionalization

The aim of this study is to demonstrate the feasibility of different functionalization methods for electrospun fibers developed using benign solvents. In particular three different approaches were investigated to achieve the functionalization of poly(epsilon caprolactone) (PCL) electrospun fibers with fibronectin. Protein surface entrapment, chemical functionalization and coaxial electrospinning were performed and compared. Moreover, bilayered scaffolds, with a top patterned and functionalized layer with fibronectin and a randomly oriented not functionalized layer were fabricated, demonstrating the versatility of the use of benign solvents for electrospinning also for the fabrication of complex graded structures. Besides the characterization of the morphology of the obtained scaffolds, ATR-FTIR and ToF-SIMS were used for the surface characterization of the functionalized fibers. Cell adhesion and proliferation were also investigated by using ST-2 cells. Positive results were obtained from all functionalized scaffolds and the most promising results were obtained with bilayered scaffolds, in terms of cells infiltration inside the fibrous structure.

Papain Loaded Poly(ε-Caprolactone) Nanoparticles: In-silico and In-Vitro Studies

Papain is a protease enzyme with therapeutic properties that are very valuable for medical applications. Poly(ε-caprolactone) (PCL) is an ideal polymeric carrier for controlled drug delivery systems due to its low biodegradability and its high biocompatibility. In this study, the three-dimensional structure and action mechanism of papain were investigated by in vitro and in silico experiments using molecular dynamics (MD) and molecular docking methods to elucidate biological functions. The results showed that the size of papain-loaded PCL nanoparticles (NPs) and the polydispersity index (PDI) of the NPs were 242.9 nm and 0.074, respectively. The encapsulation efficiency and loading efficiency were 80.4 and 27.2%, respectively. Human embryonic kidney cells (HEK-293) were used for determining the cytotoxicity of papain-loaded PCL and PCL nanoparticles. The in vitro cell culture showed that nanoparticles are not toxic at low concentrations, while toxicity slightly increases at high concentrations. In silico studies, which were carried out with MD simulations and ADME analysis showed that the strong hydrogen bonds between the ligand and the papain provide stability and indicate the regions in which the interactions occur.

Electrospun 3D composite scaffolds for craniofacial critical size defects

Critical size defects in the craniofacial region can be effectively treated using three dimensional (3D) composite structures mimicking natural extra cellular matrix (ECM) and incorporated with bioactive ceramics. In this study we have shown that the dynamic liquid bath collector can be used to form electrospun polycaprolactone (PCL)-hydroxyapatite (HA) composite structure as unique 3D scaffold. The structure was found to have three distinct sections (base, stem and head) based on the mechanism of its formation and morphology. The size of the head portion was around 15 mm and was found to vary with the process parameters. Scanning electron microscopy (SEM) analysis revealed that the base had random fibres while the fibres in stem and head sections were aligned but perpendicular to each other. X-ray diffraction (XRD) analysis also showed an increase in the crystallinity index of the fibres from base to head section. Cytotoxicity and cytocompatibility studies using human osteosarcoma (HOS) cells showed good cell adhesion and proliferation indicating the suitability of the 3D structure for craniofacial graft applications.

Electrospun Polycaprolactone/Aloe Vera_Chitosan Nanofibrous Asymmetric Membranes Aimed for Wound Healing Applications

Today, none of the wound dressings available on the market is fully capable of reproducing all the features of native skin. Herein, an asymmetric electrospun membrane was produced to mimic both layers of skin. It comprises a top dense layer (manufactured with polycaprolactone) that was designed to provide mechanical support to the wound and a bottom porous layer (composed of chitosan and Aloe Vera) aimed to improve the bactericidal activity of the membrane and ultimately the healing process. The results obtained revealed that the produced asymmetric membranes displayed a porosity, wettability, as well as mechanical properties similar to those presented by the native skin. Fibroblast cells were able to adhere, spread, and proliferate on the surface of the membranes and the intrinsic structure of the two layers of the membrane is capable of avoiding the invasion of microorganisms while conferring bioactive properties. Such data reveals the potential of these asymmetric membranes, in the near future, to be applied as wound dressings.

Artificial Bone via Bone Tissue Engineering: Current Scenario and Challenges

Bone provides mechanical support, and flexibility to the body as a structural frame work along with mineral storage, homeostasis, and blood pH regulation. The repair and/or replacement of injured or defective bone with healthy bone or bone substitute is a critical problem in orthopedic treatment. Recent advances in tissue engineering have shown promising results in developing bone material capable of substituting the conventional autogenic or allogenic bone transplants. In the present review, we have discussed natural and synthetic scaffold materials such as metal and metal alloys, ceramics, polymers, etc. which are widely being used along with their cellular counterparts such as stem cells in bone tissue engineering with their pros and cons.

Skin regeneration stimulation: the role of PCL-platelet gel nanofibrous scaffold

Skin is the largest organ of the human body. Thus far, tissue engineering of skin has developed rapidly and has used many types of growth factors and nanofibrous scaffolds. In this study, we differentiated neonate keratinocytes for epithelialization on the polycaprolactone-Platelet gel (PCL-PG) scaffold. Fabricated PCL nanofibers prepared by electrospinning technology and coated by platelet gel. Subsequently, the structure of the scaffold was evaluated by SEM, FTIR-ATR, contact angle and tensile test assays. After seeding the neonate keratinocytes on neat PCL and PCL-PG scaffolds, the epidermal maturation was tested by detecting cytokeratin 10 and loricrin determinants by immunocytochemistry; moreover, keratinocyte genes such as keratin 14, keratin 10, and Involucrin were investigated by real-time PCR. The results of MTT assay indicated an increase in cell viability and cell proliferation of neonate keratinocytes on PCL-PG nanofiber scaffolds compared with PCL. RT-PCR and immunocytochemical analysis showed better cell differentiation on the PCL-PG scaffolds than neat PCL. Furthermore, SEM microscopy images demonstrated that neo-keratinocytes enhance adhesion and proliferation on PCL-PG nanofiber scaffolds. We found that PG increases biocompatibility and wettability of scaffold, cell adhesion, and expression of keratinocyte markers. Overall, this procedure is recommended to be employed in skin tissue engineering and wounds healing.

Microfibrous silver-coated polymeric scaffolds with tunable mechanical properties

Electrospun scaffolds of poly(glycerol sebacate)/poly(ε-caprolactone) (PGS/PCL) have been used for engineered tissues due to their desirable thermal and mechanical properties as well as their tunable degradability.

In vitro hemocompatibility and cytocompatibility of a three-layered vascular scaffold fabricated by sequential electrospinning of PCL, collagen, and PLLA nanofibers

Aiming to mimic a blood vessel structurally, morphologically, and mechanically, a sequential electrospinning technique using a small diameter mandrel collector was performed and a three-layered tubular scaffold composed of nanofibers of polycaprolactone, collagen, and poly(l-lactic acid) as inner, intermediate, and outer layers, respectively, was developed. Biological performances of the scaffold in terms of compatibility with blood and endothelial cells were assessed to get some insights into its potential use as a tissue engineered small-diameter vascular replacement compared to an expanded polytetrafluoroethylene vascular graft. Due to direct contact of the blood and endothelial cells with inner surface of the scaffold, polycaprolactone fibers were characterized using SEM, water contact angle measurement, and ATR-FTIR. Despite similar surface wettability of the electrospun scaffold and the expanded polytetrafluoroethylene graft, the three-layered scaffold significantly reduced platelet adhesion and hemolysis ratio compared to expanded polytetrafluoroethylene graft while comparable blood clotting profiles were observed for both electrospun scaffold and expanded polytetrafluoroethylene graft. However, inflammatory response to nanofibrous surface of the scaffold was reduced compared to expanded polytetrafluoroethylene graft. The electrospun scaffold also presented a significantly more supportive substrate for endothelialization than the expanded polytetrafluoroethylene graft. The results described herein suggested that the three-layered scaffold has superior biological properties compared to an expanded polytetrafluoroethylene graft for vascular tissue engineering.

Versatile Production of Poly(Epsilon-Caprolactone) Fibers by Electrospinning Using Benign Solvents

The electrospinning technique is widely used for the fabrication of micro- and nanofibrous structures. Recent studies have focused on the use of less toxic and harmful solvents (benign solvents) for electrospinning, even if those solvents usually require an accurate and longer process of optimization. The aim of the present work is to demonstrate the versatility of the use of benign solvents, like acetic acid and formic acid, for the fabrication of microfibrous and nanofibrous electrospun poly(epsilon-caprolactone) mats. The solvent systems were also shown to be suitable for the fabrication of electrospun structures with macroporosity, as well as for the fabrication of composite electrospun mats, fabricated by the addition of bioactive glass (45S5 composition) particles in the polymeric solution.

DBD atmospheric plasma-modified, electrospun, layer-by-layer polymeric scaffolds for L929 fibroblast cell cultivation

This paper reported a study related to atmospheric pressure dielectric barrier discharge (DBD) Ar + O2 and Ar + N2 plasma modifications to alter surface properties of 3D PCL/Chitosan/PCL layer-by-layer hybrid scaffolds and to improve mouse fibroblast (L929 ATCC CCL-1) cell attachment, proliferation, and growth. The scaffolds were fabricated using electrospinning technique and each layer was electrospun sequentially on top of the other. The surface modifications were performed with an atmospheric pressure DBD plasma under different gas flow rates (50, 60, 70, 80, 90, and 100 sccm) and for different modification times (0.5-7 min), and then the chemical and topographical characterizations of the modified samples were done by contact angle (CA) measurements, scanning electron microscopy (SEM), atomic force microscopy, and X-ray photoelectron spectroscopy. The samples modified with Ar + O2 plasma for 1 min under 70 cm(3)/min O2 flow rate (71.077° ± 3.578) showed a 18.83% decrease compare to unmodified samples' CA value (84.463° ± 3.864). Comparing with unmodified samples, the average fiber diameter values for plasma-modified samples by Ar + O2 (1 min 70 sccm) and Ar + N2 (40 s 70 sccm) increased 40.756 and 54.295%, respectively. Additionally, the average inter-fiber pore size values exhibited decrease of 37.699 and 48.463% for the same Ar + O2 and Ar + N2 plasma-modified samples, respectively, compare to unmodified samples. Biocompatibility performance was determined with MTT assay, fluorescence, Giemsa, and confocal imaging as well as SEM. The results showed that Ar + O2-based plasma modification increased the hydrophilicity and oxygen functionality of the surface, thus affecting the cell viability and proliferation on/within scaffolds.

Fabrication of drug-loaded anti-infective guided tissue regeneration membrane with adjustable biodegradation property

For guided tissue regeneration (GTR) membrane, synchronization of the membrane biodegradation rate and tissue regeneration rate is important. Besides, the major reason for GTR membrane failure in clinical application is infection which can be prevented by loading anti-bacterial drug. To realize the consistency in membrane degradation rate and tissue regeneration rate of the anti-infective membrane, we developed metronidazole-loaded electrospun poly(ɛ-caprolactone)-gelatin nanofiber membranes with different poly(ɛ-caprolactone)/gelatin ratios (95:5, 90:10, 80:20, 70:30, 60:40, and 50:50). Homogeneous nanofibers were successfully fabricated. The mechanical strength of the membranes increased with the poly(ɛ-caprolactone) content, while the hydrophilicity decreased. The controlled and sustained release of metronidazole from all the membranes prevented the colonization of anaerobic bacteria. At all poly(ɛ-caprolactone)/gelatin ratios, all the membranes presented good biocompatibility while the increase of gelatin content resulted in enhanced cell adhesion and proliferation. Subcutaneous implantation in rabbits for 8 months demonstrated that all the membranes showed good biocompatibility without infection. Both in vitro and in vivo results showed that the biodegradation rate of the membranes was accelerated with the increase of gelatin content. The biodegradation rate and biocompatibility of the membranes can be adjusted by changing the PCL/gelatin ratio. The optimal membrane can be chosen based on the patient and tissue type to realize the synchronization of membrane degradation with tissue regeneration for the best treatment effect.

Electrospun microfiber membranes embedded with drug-loaded clay nanotubes for sustained antimicrobial protection

Guided tissue regeneration/guided bone regeneration membranes with sustained drug delivery were developed by electrospinning drug-loaded halloysite clay nanotubes doped into poly(caprolactone)/gelatin microfibers. Use of 20 wt % nanotube content in fiber membranes allowed for 25 wt % metronidazole drug loading in the membrane. Nanotubes with a diameter of 50 nm and a length of 600 nm were aligned within the 400 nm diameter electrospun fibers, resulting in membranes with doubling of tensile strength along the collector rotating direction. The halloysite-doped membranes acted as barriers against cell ingrows and have good biocompatibility. The metronidazole-loaded halloysite nanotubes incorporated in the microfibers allowed for extended release of the drugs over 20 days, compared to 4 days when directly admixed into the microfibers. The sustained release of metronidazole from the membranes prevented the colonization of anaerobic Fusobacteria, while eukaryotic cells could still adhere to and proliferate on the drug-loaded composite membranes. This indicates the potential of halloysite clay nanotubes as drug containers that can be incorporated into electrospun membranes for clinical applications.

Fabrication and evaluation of a homogeneous electrospun PCL–gelatin hybrid membrane as an anti-adhesion barrier for craniectomy

An electrospun PCL–gelatin membrane's excellent anti-adhesive properties, biocompatibility and adjustable biodegradable rate make it compatible for applying as an anti-adhesion barrier for craniotomy.

Electrospun PGS:PCL microfibers align human valvular interstitial cells and provide tunable scaffold anisotropy

Tissue engineered heart valves (TEHV) can be useful in the repair of congenital or acquired valvular diseases due to their potential for growth and remodeling. The development of biomimetic scaffolds is a major challenge in heart valve tissue engineering. One of the most important structural characteristics of mature heart valve leaflets is their intrinsic anisotropy, which is derived from the microstructure of aligned collagen fibers in the extracellular matrix (ECM). In the present study, a directional electrospinning technique is used to fabricate fibrous poly(glycerol sebacate):poly(caprolactone) (PGS:PCL) scaffolds containing aligned fibers, which resemble native heart valve leaflet ECM networks. In addition, the anisotropic mechanical characteristics of fabricated scaffolds are tuned by changing the ratio of PGS:PCL to mimic the native heart valve's mechanical properties. Primary human valvular interstitial cells (VICs) attach and align along the anisotropic axes of all PGS:PCL scaffolds with various mechanical properties. The cells are also biochemically active in producing heart-valve-associated collagen, vimentin, and smooth muscle actin as determined by gene expression. The fibrous PGS:PCL scaffolds seeded with human VICs mimick the structure and mechanical properties of native valve leaflet tissues and would potentially be suitable for the replacement of heart valves in diverse patient populations.

Construction of a collagen-based, split-thickness cornea substitute

Tissue-engineered corneas may become a promising alternative to allografts in the treatment of serious cornea defects because of the tunable characteristics of the biomaterials, biomimetic designs, and incorporation of patient's own cells. In this study, collagen foam was coated with a fibrous mat to mimic the stromal layer and the Bowman's layer. The stromal layer substitute was made of N-ethyl-N-(3-dimethyl aminopropyl)carbodiimide/N-hydroxysuccinimide-cross-linked collagen-chondroitin sulfate foam and seeded with primary human corneal keratocytes (HK). Retinal pigment epithelium (RPE) cells served as the epithelial layer after seeding on a dehydrothermally cross-linked collagen type I fibrous mat deposited directly on top of the foams by electrospinning. The physical characterization and the in vitro studies showed that the designed cornea replacement was suitable for cell attachment and growth, and co-culture of the two cell types induced more extracellular matrix (ECM) deposition than the single cell-seeded constructs. The fiber layer was shown to be successful in separating the HK and RPE cells, and still allowed them to maintain cell-cell communication as the increase in ECM deposition and the maintenance of the high transparency (~80%) suggested. This split-thickness corneal substitute was also shown to be readily suturable without any major tears at the end of a short co-culture of 30 days.

Preparation of laminated poly(ε-caprolactone)-gelatin-hydroxyapatite nanocomposite scaffold bioengineered via compound techniques for bone substitution

In this research, new bioactive nanocomposite scaffolds were successfully developed using poly(ε-caprolactone) (PCL), cross-linked gelatin and nanoparticles of hydroxyapatite (HAp) after testing different solvents and methods. First, HAp powder was synthesized via a chemical precipitation technique and characterized. Then, the nanocomposites were prepared through layer solvent casting combined with freeze-drying and lamination techniques. According to the results, the increasing of the PCL weight in the scaffolds led to the improvement of the mechanical properties. The amount of ultimate stress, stiffness and also elastic modulus increased from 8 MPa for 0% wt PCL to 23.5 MPa for 50% wt PCL. The biomineralization study revealed the formation of an apatite layer on the scaffolds after immersion in simulated body fluid (SBF). The Ca-P ratios were in accordance to nonstoichiometric biological apatite, which was approximately 1.67. The in vitro biocompatibility and cytocompatibility of the scaffolds were tested using mesenchymal stem cells (MSCs), and the results indicated no sign of toxicity, and cells were found to be attached to the scaffold walls. The in vivo biocompatibility and osteogenesis of these scaffolds in the animal experiments is also under investigation, and the result will be published at the end of the study.

Electrospun cartilage-derived matrix scaffolds for cartilage tissue engineering

Macroscale scaffolds created from cartilage-derived matrix (CDM) demonstrate chondroinductive or chondro-inductive properties, but many fabrication methods do not allow for control of nanoscale architecture. In this regard, electrospun scaffolds have shown significant promise for cartilage tissue engineering. However, nanofibrous materials generally exhibit a relatively small pore size and require techniques such as multilayering or the inclusion of sacrificial fibers to enhance cellular infiltration. The objectives of this study were (1) to compare multilayer to single-layer electrospun poly(ɛ-caprolactone) (PCL) scaffolds for cartilage tissue engineering, and (2) to determine whether incorporation of CDM into the PCL fibers would enhance chondrogenesis by human adipose-derived stem cells (hASCs). PCL and PCL-CDM scaffolds were prepared by sequential collection of 60 electrospun layers from the surface of a grounded saline bath into a single scaffold, or by continuous electrospinning onto the surface of a grounded saline bath and harvest as a single-layer scaffold. Scaffolds were seeded with hASCs and evaluated over 28 days in culture. The predominant effects on hASCs of incorporation of CDM into scaffolds were to stimulate sulfated glycosaminoglycan synthesis and COL10A1 gene expression. Compared with single-layer scaffolds, multilayer scaffolds enhanced cell infiltration and ACAN gene expression. However, compared with single-layer constructs, multilayer PCL constructs had a much lower elastic modulus, and PCL-CDM constructs had an elastic modulus approximately 1% that of PCL constructs. These data suggest that multilayer electrospun constructs enhance homogeneous cell seeding, and that the inclusion of CDM stimulates chondrogenesis-related bioactivity.