Hydroxyapatite nanowire composited gelatin cryogel with improved mechanical properties and cell migration for bone regeneration

An Acellular, Self-Healed Trilayer Cryogel for Osteochondral Regeneration in Rabbits

Osteochondral regeneration remains formidable challenges despite significant advances in microsurgery. Herein, an acellular trilayer cryogel (TC) with injectability, tunable pore sizes (80-200 µm), and appropriate compressive modulus (10.8 kPa) is manufactured from self-healable hydrogel under different gelling times through Schiff reaction between chitosan and difunctionalized polyurethane (DFPU). Bioactive molecules (Y27632 and dexamethasone) are respectively loaded in the top and bottom layers to form the Y27632/dexamethasone-loaded trilayer cryogel (Y/DEX-TC). Mesenchymal stem cells (MSCs) seeded in Y/DEX-TC proliferated ≈350% in vitro and underwent chondrogenesis or osteogenesis in response to the respective release of Y or DEX in 14 days. Acupuncture is administered to animals in an attempt to modulate the innate regulatory system and mobilize endogenous MSCs for osteochondral defect regeneration. In vivo rabbit experiments using Y/DEX-TC combined with acupuncture successfully regulate SDF-1 and TGF-β1 levels, which possibly cause MSC migration toward Y/DEX-TC. The synergistic effect of cryogel and acupuncture on immunomodulation is verified with a ≈7.3-fold enhancement of the M2-/M1-macrophage population ratio by treatment of Y/DEX-TC combining acupuncture, significantly greater than ≈1.5-fold increase by acupuncture or ≈2.2-fold increase by Y/DEX-TC alone. This novel strategy using acellular drug-loaded cryogel and accessible acupuncture shows promise in treating osteochondral defects of joint damage.

Gelatin Methacryloyl (GelMA)-Based Biomaterial Inks: Process Science for 3D/4D Printing and Current Status

Tissue engineering for injured tissue replacement and regeneration has been a subject of investigation over the last 30 years, and there has been considerable interest in using additive manufacturing to achieve these goals. Despite such efforts, many key questions remain unanswered, particularly in the area of biomaterial selection for these applications as well as quantitative understanding of the process science. The strategic utilization of biological macromolecules provides a versatile approach to meet diverse requirements in 3D printing, such as printability, buildability, and biocompatibility. These molecules play a pivotal role in both physical and chemical cross-linking processes throughout the biofabrication, contributing significantly to the overall success of the 3D printing process. Among the several bioprintable materials, gelatin methacryloyl (GelMA) has been widely utilized for diverse tissue engineering applications, with some degree of success. In this context, this review will discuss the key bioengineering approaches to identify the gelation and cross-linking strategies that are appropriate to control the rheology, printability, and buildability of biomaterial inks. This review will focus on the GelMA as the structural (scaffold) biomaterial for different tissues and as a potential carrier vehicle for the transport of living cells as well as their maintenance and viability in the physiological system. Recognizing the importance of printability toward shape fidelity and biophysical properties, a major focus in this review has been to discuss the qualitative and quantitative impact of the key factors, including microrheological, viscoelastic, gelation, shear thinning properties of biomaterial inks, and printing parameters, in particular, reference to 3D extrusion printing of GelMA-based biomaterial inks. Specifically, we emphasize the different possibilities to regulate mechanical, swelling, biodegradation, and cellular functionalities of GelMA-based bio(material) inks, by hybridization techniques, including different synthetic and natural biopolymers, inorganic nanofillers, and microcarriers. At the close, the potential possibility of the integration of experimental data sets and artificial intelligence/machine learning approaches is emphasized to predict the printability, shape fidelity, or biophysical properties of GelMA bio(material) inks for clinically relevant tissues.

Cryogel Scaffolds for Tissue-Engineering: Advances and Challenges for Effective Bone and Cartilage Regeneration

Critical-sized bone defects and articular cartilage injuries resulting from trauma, osteonecrosis, or age-related degeneration can be often non-healed by physiological repairing mechanisms, thus representing a relevant clinical issue due to a high epidemiological incidence rate. Novel tissue-engineering approaches have been proposed as an alternative to common clinical practices. This cutting-edge technology is based on the combination of three fundamental components, generally referred to as the tissue-engineering triad: autologous or allogenic cells, growth-stimulating factors, and a scaffold. Three-dimensional polymer networks are frequently used as scaffolds to allow cell proliferation and tissue regeneration. In particular, cryogels give promising results for this purpose, thanks to their peculiar properties. Cryogels are indeed characterized by an interconnected porous structure and a typical sponge-like behavior, which facilitate cellular infiltration and ingrowth. Their composition and the fabrication procedure can be appropriately tuned to obtain scaffolds that match the requirements of a specific tissue or organ to be regenerated. These features make cryogels interesting and promising scaffolds for the regeneration of different tissues, including those characterized by very complex mechanical and physical properties, such as bones and joints. In this review, state-of-the-art fabrication and employment of cryogels for supporting effective osteogenic or chondrogenic differentiation to allow for the regeneration of functional tissues is reported. Current progress and challenges for the implementation of this technology in clinical practice are also highlighted.

Integrated Piezoelectric/Conductive Composite Cryogel Creates Electroactive Microenvironment for Enhanced Bone Regeneration

Natural bone tissue possesses inherent electrophysiological characteristics, displaying conductivity and piezoelectricity simultaneously; hence, the reconstruction of local electrical microenvironment at defect site provides an effective strategy to enhance osteogenesis. Herein, a composite cryogel-type scaffold (referred to as Gel-PD-CMBT) is developed for bone regeneration, utilizing gelatin (Gel) in combination with a conductive poly(ethylene dioxythiophene)/polystyrene sulfonate matrix and Ca/Mn co-doped barium titanate (CMBT) nanofibers as the piezoelectric filler. The incorporation of these components results in the formation of an integrated piezoelectric/conductive network within the scaffold, facilitating charge migration and yielding a conductivity of 0.59 S cm-1 . This conductive scaffold creates a promising electroactive microenvironment, which is capable of up-regulating biological responses. Furthermore, the interconnected porous structure of the Gel-PD-CMBT scaffold not only provides mechanical stability but also offered ample space for cellular and tissue ingrowth. This Gel-PD-CMBT scaffold demonstrates a greater capacity to promote cellular osteogenic differentiation in vitro and neo-bone formation in vivo. In summary, the Gel-PD-CMBT scaffold, with its integrated piezoelectricity and conductivity, effectively restores the local electroactive microenvironment, offering an ideal platform for the regeneration of electrophysiological bone tissue.

Embedded 3D Printing of Cryogel-Based Scaffolds

Cryogel-based scaffolds have attracted great attention in tissue engineering due to their interconnected macroporous structures. However, three-dimensional (3D) printing of cryogels with a high degree of precision and complexity is a challenge, since the synthesis of cryogels occurs under cryogenic conditions. In this study, we demonstrated the fabrication of cryogel-based scaffolds for the first time by using an embedded printing technique. A photo-cross-linkable gelatin methacryloyl (GelMA)-based ink composition, including alginate and photoinitiator, was printed into a nanoclay-based support bath. The layer-by-layer extruded ink was held in complex and overhanging structures with the help of pre-cross-linking of alginate with Ca2+ present in the support bath. The printed 3D structures in the support bath were frozen, and then GelMA was cross-linked at a subzero temperature under UV light. The printed and cross-linked structures were successfully recovered from the support bath with an integrated shape complexity. SEM images showed the formation of a 3D printed scaffold where porous GelMA cryogel was integrated between the cross-linked alginate hydrogels. In addition, they showed excellent shape recovery under uniaxial compression cycles of up to 80% strain. In vitro studies showed that the human fibroblast cells attached to the 3D printed scaffold and displayed spread morphology with a high proliferation rate. The results revealed that the embedded 3D printing technique enables the fabrication of cytocompatible cryogel based scaffolds with desired morphology and mechanical behavior using photo-cross-linkable bioink composition. The properties of the cryogels can be modified by varying the GelMA concentration, whereby various shapes of scaffolds can be fabricated to meet the specific requirements of tissue engineering applications.

Injectable, High Specific Surface Area Cryogel Microscaffolds Integrated with Osteoinductive Bioceramic Fibers for Enhanced Bone Regeneration

Organic-inorganic composites with high specific surface area and osteoinductivity provide a suitable microenvironment for cell ingrowth and effective ossification, which could greatly promote bone regeneration. Here, we report gelatin methacryloyl (GelMA) cryogel microspheres that are reinforced with hydroxyapatite (HA) nanowires and calcium silicate (CS) nanofibers to achieve the goal. The prepared composite cryogel microspheres with open porous structure and rough surface greatly facilitate cell anchoring, simultaneously exhibiting excellent injectability. Compared to the only HA- or CS-containing counterparts, the GelMA cryogel microspheres composited with HA:CS (termed as GMHC) achieve sustained release of bioactive Ca, P, and Si elements, which are conducive to osteogenic differentiation of bone marrow mesenchymal stromal cells (BMSCs). These composite microspheres can prevent from forming peralkalic conditions, which is beneficial for cell growth. After injection of cryogel microspheres into rat calvarial defects, neo-bone tissue grows into their pores, showing tight integration. The embedded bioceramic components significantly promote bone regeneration, with the GMHC achieving the best regenerative outcomes. Promisingly, porous organic-inorganic composite cryogel microspheres, with high specific surface area, biodegradability, and osteoinductivity, can act as injectable microscaffolds to repair bone defects with enhanced efficiency, which may widen the scaffold strategy for bone tissue engineering.

Human urine-derived stem cell exosomes delivered via injectable GelMA templated hydrogel accelerate bone regeneration

The key to critical bone regeneration in tissue engineering relies on an ideal bio-scaffold coated with a controlled release of growth factors. Gelatin methacrylate (GelMA) and Hyaluronic acid methacrylate (HAMA) have been a novel topic of interest in bone regeneration while introducing appropriate nano-hydroxyapatite (nHAP) to improve its mechanical properties. And the exosomes derived from human urine-derived stem cells (human USCEXOs) have also been reported to promote osteogenesis in tissue engineering. The present study aimed to design a new GelMA-HAMA/nHAP composite hydrogel as a drug delivery system. The USCEXOs were encapsulated and slow-released in the hydrogel for better osteogenesis. The characterization of the GelMA-based hydrogel showed excellent controlled release performance and appropriate mechanical properties. The in vitro studies showed that the USCEXOs/GelMA-HAMA/nHAP composite hydrogel could promote the osteogenesis of bone marrow mesenchymal stem cells (BMSCs) and the angiogenesis of endothelial progenitor cells (EPCs), respectively. Meanwhile, the in vivo results confirmed that this composite hydrogel could significantly promote the defect repair of cranial bone in the rat model. In addition, we also found that USCEXOs/GelMA-HAMA/nHAP composite hydrogel can promote the formation of H-type vessels in the bone regeneration area, enhancing the therapeutic effect. In conclusion, our findings suggested that this controllable and biocompatible USCEXOs/GelMA-HAMA/nHAP composite hydrogel may effectively promote bone regeneration by coupling osteogenesis and angiogenesis.

Molecularly Imprinted Cryogels for the Selective Adsorption of Salicylic Acid

In this study, molecularly imprinted cryogels were fabricated for selective adsorption of salicylic acid. Cryogelation was performed at - 20 °C using a cationic monomer N,N-dimethylaminoethyl methacrylate as a functional monomer for salicylic acid. The morphology, swelling behaviors, and chemical structures of the cryogels were investigated. The general structure and porosities of cryogels were compared with the traditional hydrogels using field emission scanning electron microscopy (FE-SEM). The adsorption performance of cryogels toward salicylic acid was studied to investigate the optimal adsorption conditions. Adsorption capacity of the imprinted cryogels was 1.95 and 7.51 times higher than those of non-imprinted and bare PHEMA cryogels, respectively, due to the specific binding sites toward salicylic acid. Molecularly imprinted cryogels exhibited significant stability and reusability by keeping more than 85% of their adsorption capacity after ten regeneration cycles. Considering the fabrication process, adsorption capacity, selectivity, and reusability of the imprinted cryogels, these new materials could be utilized as a promising alternative for selective adsorption of drug molecules.

Biomimetic Mineralized Hydroxyapatite Nanofiber-Incorporated Methacrylated Gelatin Hydrogel with Improved Mechanical and Osteoinductive Performances for Bone Regeneration

Purpose

Methacrylic anhydride-modified gelatin (GelMA) hydrogels exhibit many beneficial biological features and are widely studied for bone tissue regeneration. However, deficiencies in the mechanical strength, osteogenic factors and mineral ions limit their application in bone defect regeneration. Incorporation of inorganic fillers into GelMA to improve its mechanical properties and bone regenerative ability has been one of the research hotspots.

Methods

In this work, hydroxyapatite nanofibers (HANFs) were prepared and mineralized in a simulated body fluid to make their components and structure more similar to those of natural bone apatite, and then different amounts of mineralized HANFs (m-HANFs) were incorporated into the GelMA hydrogel to form m-HANFs/GelMA composite hydrogels. The physicochemical properties, biocompatibility and bone regenerative ability of m-HANFs/GelMA were determined in vitro and in vivo.

Results

The results indicated that m-HANFs with high aspect ratio presented rough and porous surfaces coated with bone-like apatite crystals. The incorporation of biomimetic m-HANFs improved the biocompatibility, mechanical, swelling, degradation and bone regenerative performances of GelMA. However, the improvement in the performance of the composite hydrogel did not continuously increase as the amount of added m-HANFs increased, and the 15m-HANFs/GelMA group exhibited the best swelling and degradation performances and the best bone repair effect in vivo among all the groups.

Conclusion

The biomimetic m-HANFs/GelMA composite hydrogel can provide a novel option for bone tissue engineering in the future; however, it needs further investigations to optimize the proportions of m-HANFs and GelMA for improving the bone repair effect.

Hydroxyapatite-based adsorbents: Applications in sequestering heavy metals and dyes

Hydroxyapatite (HAp) is a calcium phosphate material that was used primarily in bone regeneration and repair as a result of its chemical similarity with bone. However, HAp has emerged as a very promising adsorbent for sequestering contaminants like heavy metals, dyes, hydrocarbons as well as other emerging pollutants from wastewater as a result of its versatility and encouraging adsorptive properties. Contaminants like heavy metals and dyes have been a major source of environmental concern. Research studies involving the use of HAp as adsorbents for the adsorptive treatment of heavy metal- and dye-contaminated wastewater have become increasingly popular due to its eco-friendliness, easy synthesis, unique adsorption properties etc. Various methods are available for the synthesis of HAp and its composites with some of these methods used in combination with other methods to obtain more efficient HAp-based adsorbents. In this work, the adsorptive removal of heavy metals and dyes by HAp and its composites was extensively reviewed as well as the parametric effects of process factors like contact time, solution pH, temperature, solute concentration etc on the adsorption process. Kinetic, thermodynamic, and isotherm models for elucidating the adsorption process were also considered. Generally, from the works reviewed, HAp-based adsorbents were found to be very effective for sequestering heavy metals and dyes from solution and thus presents a low-cost option for adsorptive wastewater treatment.

Preparation and antibacterial properties of an AgBr@SiO2/GelMA composite hydrogel

Pure gelatin hydrogels lack antibacterial function and have poor mechanical properties, which restrict their application in wound dressings. In this study, nanosized silver bromide-doped mesoporous silica (AgBr@SiO2) microspheres with hollow structures were prepared by a modified Stober method. The novel microspheres can not only release silver ions to treat bacteria but also release drugs to treat skin wound. Furthermore, AgBr@SiO2 microspheres were modified with propyl methacrylate, incorporated into methacrylated gelatin (GelMA), and crosslinked by UV light to prepare AgBr@SiO2/GelMA dressings consisting of composite hydrogels. The results showed that the AgBr@SiO2 microspheres could enhance the mechanical properties of the hydrogels. With the increase in the AgBr@SiO2 concentration from 0.5 to 1 mg/mL, the dressings demonstrated effective antimicrobial activity against both Staphylococcus aureus and Escherichia coli. Furthermore, full-thickness skin wounds in vivo wound healing studies with Sprague-Dawley rats were evaluated. When treated with AgBr@SiO2/GelMA containing 1 mg/mL AgBr@SiO2, only 15% of the wound area left on day 10. Histology results also showed the epidermal and dermal layers were better organized. These results suggest that AgBr@SiO2/GelMA-based dressing materials could be promising candidates for wound dressings.

Multifunctional 3D sponge-like macroporous cryogel-modified long carbon fiber reinforced polyetheretherketone implant with enhanced vascularization and osseointegration

Long carbon fiber reinforced polyetheretherketone (LCFRPEEK), a newly developed high-performance composite material, is being investigated as a possible orthopedic implant. However, its inability of angiogenesis and osseointegration after implantation makes...

Biomimetic Methacrylated Gelatin Hydrogel Loaded With Bone Marrow Mesenchymal Stem Cells for Bone Tissue Regeneration

Large-segment bone defect caused by trauma or tumor is one of the most challenging problems in orthopedic clinics. Biomimetic materials for bone tissue engineering have developed dramatically in the past few decades. The organic combination of biomimetic materials and stem cells offers new strategies for tissue repair, and the fate of stem cells is closely related to their extracellular matrix (ECM) properties. In this study, a photocrosslinked biomimetic methacrylated gelatin (Bio-GelMA) hydrogel scaffold was prepared to simulate the physical structure and chemical composition of the natural bone extracellular matrix, providing a three-dimensional (3D) template and extracellular matrix microenvironment. Bone marrow mesenchymal stem cells (BMSCS) were encapsulated in Bio-GelMA scaffolds to examine the therapeutic effects of ECM-loaded cells in a 3D environment simulated for segmental bone defects. In vitro results showed that Bio-GelMA had good biocompatibility and sufficient mechanical properties (14.22kPa). A rat segmental bone defect model was constructed in vivo. The GelMA-BMSC suspension was added into the PDMS mold with the size of the bone defect and photocured as a scaffold. BMSC-loaded Bio-GelMA resulted in maximum and robust new bone formation compared with hydrogels alone and stem cell group. In conclusion, the bio-GelMA scaffold can be used as a cell carrier of BMSC to promote the repair of segmental bone defects and has great potential in future clinical applications.

Biodegradable gelatin/silver nanoparticle composite cryogel with excellent antibacterial and antibiofilm activity and hemostasis for Pseudomonas aeruginosa-infected burn wound healing

Burn wounds are susceptible to bacterial infections and are usually accompanied by a large amount of exudate, making the treatment of burn wounds a challenge in the clinic. Here, we developed a biodegradable cryogel with high water absorption and good antibacterial and antibiofilm activity based on gelatin (GT) and silver nanoparticles (Ag NPs) to promote burn wound healing. The porous GT/Ag cryogel had a swelling ratio of up to 4000%, effectively absorbing wound exudate and allowing for gas exchange. Moreover, the GT/Ag cryogel had an excellent killing effect on methicillin-resistant Staphylococcus aureus (MRSA) and Pseudomonas aeruginosa (PA), which burn wounds are susceptible to, and can effectively remove mature biofilms. In the rat liver defect noncompressible hemorrhage model, GT/Ag cryogels with shape memory performance showed better hemostatic ability than commercial gelatin sponges. Most importantly, the GT/Ag cryogel was more effective than the Tegaderm^TM dressing and GT cryogel in promoting wound contraction, collagen deposition, and angiogenesis and reducing inflammation in a PA-infected burn wound model. In addition, GT/Ag cryogels degraded in the body within 4 weeks, which alleviated the pain of peeling the dressing from the wound. Therefore, GT/Ag cryogels with outstanding antibacterial properties and effective absorption of wound exudates are excellent candidates for wound dressings to promote burn wound repair.

Controlled co-delivery system of magnesium and lanthanum ions for vascularized bone regeneration

For craniofacial bone regeneration, how to promote vascularized bone regeneration is still a significant problem, and the controlled release of trace elements vital to osteogenesis has attracted attention. In this study, an ion co-delivery system was developed to promote angiogenesis and osteogenesis. Magnesium ions (Mg²⁺) and lanthanum ions (La³⁺) were selected as biosignal molecules because Mg²⁺can promote angiogenesis and both of them can enhance bone formation. Microspheres made of poly(lactide-co-glycolide) were applied to load La₂(CO₃)₃, which was embedded into a MgO/MgCO₃-loaded cryogel made of photocrosslinkable gelatin methacryloyl to enable co-delivery of Mg²⁺and La³⁺. Evaluations of angiogenesis and osteogenesis were conducted via bothin vitrocell culture using human bone marrow mesenchymal stromal cells andin vivoimplantation using a rat model with calvarial defect (5 mm in diameter). Compared to systems releasing only Mg²⁺or La³⁺, the combination system demonstrated more significant effects on blood vessels formation, thereby promoting the regeneration of vascularized bone tissue. At 8 weeks post-implantation, the new bone volume/total bone volume ratio reached a value of 40.1 ± 0.9%. In summary, a properly designed scaffold system with the capacity to release ions of different bioactivities in a desired pattern can be a promising strategy to meet vascularized bone regeneration requirements.

An Overview on Collagen and Gelatin-Based Cryogels: Fabrication, Classification, Properties and Biomedical Applications

Decades of research into cryogels have resulted in the development of many types of cryogels for various applications. Collagen and gelatin possess nontoxicity, intrinsic gel-forming ability and physicochemical properties, and excellent biocompatibility and biodegradability, making them very desirable candidates for the fabrication of cryogels. Collagen-based cryogels (CBCs) and gelatin-based cryogels (GBCs) have been successfully applied as three-dimensional substrates for cell culture and have shown promise for biomedical use. A key point in the development of CBCs and GBCs is the quantitative and precise characterization of their properties and their correlation with preparation process and parameters, enabling these cryogels to be tuned to match engineering requirements. Great efforts have been devoted to fabricating these types of cryogels and exploring their potential biomedical application. However, to the best of our knowledge, no comprehensive overviews focused on CBCs and GBCs have been reported currently. In this review, we attempt to provide insight into the recent advances on such kinds of cryogels, including their fabrication methods and structural properties, as well as potential biomedical applications.

Injectable GelMA Cryogel Microspheres for Modularized Cell Delivery and Potential Vascularized Bone Regeneration

Cell therapeutics hold tremendous regenerative potential and the therapeutic effect depends on the effective delivery of cells. However, current cell delivery carriers with unsuitable cytocompatibility and topological structure demonstrate poor cell viability during injection. Therefore, porous shape-memory cryogel microspheres (CMS) are prepared from methacrylated gelatin (GelMA) by combining an emulsion technique with gradient-cooling cryogelation. Pore sizes of the CMS are adjusted via the gradient-cooling procedure, with the optimized pore size (15.5 ± 6.0 µm) being achieved on the 30-min gradient-cooled variant (CMS-30). Unlike hydrogel microspheres (HMS), CMS promotes human bone marrow stromal cell (hBMSC) and human umbilical vein endothelial cell (HUVEC) adhesion, proliferated with high levels of stemness for 7 d, and protects cells during the injection process using a 26G syringe needle. Moreover, CMS-30 enhances the osteogenic differentiation of hBMSCs in osteoinductive media. CMS can serve as building blocks for delivering multiple cell types. Here, hBMSC-loaded and HUVEC-loaded CMS-30, mixed at a 1:1 ratio, are injected subcutaneously into nude mice for 2 months. Results show the development of vascularized bone-like tissue with high levels of OCN and CD31. These findings indicate that GelMA CMS of a certain pore size can effectively deliver multiple cells to achieve functional tissue regeneration.

Biomedical application of photo-crosslinked gelatin hydrogels

Abstract

During the past decades, photo-crosslinked gelatin hydrogel (methacrylated gelatin, GelMA) has gained a lot of attention due to its remarkable application in the biomedical field. It has been widely used in cell transplantation, cell culture and drug delivery, based on its crosslinking to form hydrogels with tunable mechanical properties and excellent bio-compatibility when exposed to light irradiation to mimic the micro-environment of native extracellular matrix (ECM). Because of its unique biofunctionality and mechanical tenability, it has also been widely applied in the repair and regeneration of bone, heart, cornea, epidermal tissue, cartilage, vascular, peripheral nerve, oral mucosa, and skeletal muscle et al. The purpose of this review is to summarize the recent application of GelMA in drug delivery and tissue engineering field. Moreover, this review article will briefly introduce both the development of GelMA and the characterization of GelMA. Finally, we discuss the challenges and future development prospects of GelMA as a tissue engineering material and drug or gene delivery carrier, hoping to contribute to accelerating the development of GelMA in the biomedical field.

Graphical abstract

Biomimetic Membranes of Methacrylated Gelatin/Nanohydroxyapatite/Poly(l-Lactic Acid) for Enhanced Bone Regeneration

Nanofibrous poly(l-lactic acid) (PLLA) membrane-simulated extracellular matrices (ECMs) can be used in the biomedical field. However, the hydrophobic nature and poor osteoinductive property of PLLA limit its application in guided bone regeneration (GBR). In this work, a methacrylated gelatin/nano-HA (GelMA/nHA) complex was first synthesized in situ and then introduced into PLLA to fabricate biomimetic GelMA/nHA/PLLA membranes, mimicking the nanofibrous architecture and composition of ECMs by electrospinning and photocrosslinking. Compared to PLLA and GelMA/PLLA membranes, the novel GelMA/nHA/PLLA membranes demonstrated better tensile, hydrophilic, water sorption, and degradation properties. An in vitro biological evaluation indicated that the membranes promoted human bone marrow-derived mesenchymal stem cell (hBMSC) proliferation, adhesion, and osteogenic differentiation. Critical-sized defects in rat models were used to evaluate the bone regeneration performances of the three kinds of membranes in vivo, and the GelMA/nHA/PLLA membranes demonstrated excellent osteogenic regeneration potential. Therefore, GelMA/nHA/PLLA membranes have wide application prospects in bioengineering applications such as GBR treatment.

Enhanced angiogenic effects of RGD, GHK peptides and copper (II) compositions in synthetic cryogel ECM model

Synthetic oligopeptides are a promising alternative to natural full-length growth factors and extracellular matrix (ECM) proteins in tissue regeneration and therapeutic angiogenesis applications. In this work, angiogenic properties of dual and triple compositions containing RGD, GHK peptides and copper (II) ions (Cu²⁺) were for the first time studied. To reveal specific in vitro effects of these compositions in three-dimensional scaffold, adamantyl group bearing peptides, namely Ada-Ahx-GGRGD (1) and Ada-Ahx-GGGHK (2), were effectively immobilized in bioinert pHEMA macroporous cryogel via host-guest β-cyclodextrin-adamantane interaction. The cryogels were additionally functionalized with Cu²⁺ via the formation of GHK-Cu complex. Angiogenic responses of HUVECs grown within the cryogel ECM model were analyzed. The results demonstrate that the combination of RGD with GHK and further with Cu²⁺ dramatically increases cell proliferation, differentiation, and production of a series of angiogenesis related cytokines and growth factors. Furthermore, the level of glutathione, a key cellular antioxidant and redox regulator, was altered in relation to the angiogenic effects. These results are of particular interest for establishing the role of multiple peptide signals on regeneration related processes and for developing improved tissue engineering materials.

Macroporous scaffolds developed from CaSiO3 nanofibers regulating bone regeneration via controlled calcination

Calcium silicate (CS) is envisioned as a good substrate for bone tissue engineering applications because it can provide bioactive ions like Ca²⁺ and Si⁴⁺ to promote bone regeneration. Calcination temperature is a critical factor in determining the crystallinity of CS ceramic, which subsequently influences its degradation and ion release behaviors. To investigate the effect of calcination temperature on the capacity of CS in inducing bone regeneration, CS nanofibers were fabricated via electrospinning of precursor sol-gel and subsequent sintering at 800 °C, 1000 °C or 1200 °C. As the calcination temperature was increased, the obtained CS nanofibers displayed higher crystallinity and slower degradation rate. The CS nanofibers calcined at 800 °C (800 m) would like to cause high pH (>9) in cell culture medium due to its rapid ion release rate, displaying adverse effect on cell viability. Among all the preparations, it was found the CS nanofibers calcined at 1000 °C (1000 m) demonstrated the strongest promotion effect on the osteogenic differentiation of bone marrow mesenchymal stromal cells. To facilitate in vivo implantation, the CS nanofibers were shaped into three-dimensional macroporous scaffolds and coated with gelatin to improve their mechanical stability. By implanting the scaffolds into rat calvarial defects, it was confirmed the scaffold made of CS nanofibers calcined at 1000 °C was able to enhance new bone formation more efficiently than the scaffolds made of CS nanofibers calcined at 800 °C or 1200 °C. To summarize, calcination temperature could be an effective and useful tool applied to produce CS bioceramic substrates with improved potential in enhancing osteogenesis by regulating their degradation and bioactive ion release behaviors.

Macroporous elastic cryogels based on platelet lysate and oxidized dextran as tissue engineering scaffold: In vitro and in vivo evaluations

In this study, three-dimensional macroporous cryogels were developed from platelet lysate (PL) and different concentrations of oxidized dextran (OD; 0.5, 1, 2, 4%). Subsequently, PL/OD scaffolds were characterized for potential use in tissue engineering applications. The pore size and morphology of the resulting cryogels were visualized using scanning electron microscopy (SEM). The pore size distributions were determined using mercury intrusion porosimetry (MIP). In vitro hydrolytic degradation, water uptake, mechanical properties and hemocompatibility were investigated. Extraction test was carried out to evaluate potential in vitro toxic effects of the PL/OD. The in vitro adhesion, proliferation, chondrogenic differentiation, and extracellular matrix production of human adipose stem cells (hASCs) on PL/OD cryogels were evaluated. In vivo biodegradation of the cryogels was investigated at the subcutaneous dorsal site of rats. SEM and MIP results indicated that PL/OD had a macroporous pore structure with pore sizes ranging between 10 and 200 μm. The cryogels completely degraded within 90-240 days post-implantation, depending on OD concentration. Histochemical analysis revealed high levels of cell and tissue infiltration into the pores of PL/OD. In vitro cytotoxicity findings indicated that the extracts of PL/OD_0.5, PL/OD₁ and PL/OD₂ showed no cytotoxic effect, whereas that of PL/OD₄ exhibited a moderate cytotoxic effect on cell cultures. hASCs seeded on PL/OD₂ retained their viability and showed extensive spreading and filopodia formation after 7 days. PL/OD₂ also supported the chondrogenesis of hASCs in the presence of chondro-inductive factors. Given all the results, PL/OD could have potential as a scaffold for tissue engineering applications.

Injectable Magnesium-Zinc Alloy Containing Hydrogel Complex for Bone Regeneration

Gelatin methacryloyl (GelMA) has been widely used in bone engineering. It can also be filled into the calvarial defects with irregular shape. However, lack of osteoinductive capacity limits its potential as a candidate repair material for calvarial defects. In this study, we developed an injectable magnesium-zinc alloy containing hydrogel complex (Mg-IHC), in which the alloy was fabricated in an atomization process and had small sphere, regular shape, and good fluidity. Mg-IHC can be injected and plastically shaped. After cross-linking, it contents the elastic modulus similar to GelMA, and has inner holes suitable for nutrient transportation. Furthermore, Mg-IHC showed promising biocompatibility according to our evaluations of its cell adhesion, growth status, and proliferating activity. The results of alkaline phosphatase (ALP) activity, ALP staining, alizarin red staining, and real-time polymerase chain reaction (PCR) further indicated that Mg-IHC could significantly promote the osteogenic differentiation of MC3T3-E1 cells and upregulate the genetic expression of collagen I (COL-I), osteocalcin (OCN), and runt-related transcription factor 2 (RUNX2). Finally, after applied to a mouse model of critical-sized calvarial defect, Mg-IHC remarkably enhanced bone formation at the defect site. All of these results suggest that Mg-IHC can promote bone regeneration and can be potentially considered as a candidate for calvarial defect repairing.

Composite Cryogel with Polyelectrolyte Complexes for Growth Factor Delivery

Macroporous scaffolds composed of chitosan (CHI), hydroxyapatite (HA), heparin (Hep), and polyvinyl alcohol (PVA) were prepared with a glutaraldehyde (GA) cross-linker by cryogelation. Addition of PVA to the reaction mixture slowed down the formation of a polyelectrolyte complex (PEC) between CHI and Hep, which allowed more thorough mixing, and resulted in the development of the homogeneous matrix structure. Freezing of the CHI-HA-GA and PVA-Hep-GA mixture led to the formation of a non-stoichiometric PEC between oppositely charged groups of CHI and Hep, which caused further efficient immobilization of bone morphogenic protein 2 (BMP-2) possible due to electrostatic interactions. It was shown that the obtained cryogel matrix released BMP-2 and supported the differentiation of rat bone marrow mesenchymal stem cells (rat BMSCs) into the osteogenic lineage. Rat BMSCs attached to cryogel loaded with BMP-2 and expressed osteocalcin in vitro. Obtained composite cryogel with PEC may have high potential for bone regeneration and tissue engineering applications.