Comparison of multiple DNA dyes for real-time PCR: effects of dye concentration and sequence composition on DNA amplification and melting temperature

Real-time fluorescence loop-mediated isothermal amplification assays for detection of zoonotic malaria Plasmodium parasites

BACKGROUND

Natural human infections by Plasmodium cynomolgi and P. inui have been reported recently and gain the substantial attention from Southeast Asian countries. Zoonotic transmission of non-human malaria parasites to humans from macaque monkeys occurred through the bites of the infected mosquitoes. The objective of this study is to establish real-time fluorescence loop-mediated isothermal amplification (LAMP) assays for the detection of zoonotic malaria parasites by combining real-time fluorescent technology with the isothermal amplification technique.

METHODS

By using 18S rRNA as the target gene, the primers for P. cynomolgi, P. coatneyi and P. inui were newly designed in the present study. Four novel real-time fluorescence LAMP assays were developed for the detection of P. cynomolgi, P. coatneyi, P. inui and P. knowlesi. The entire amplification process was completed in 60 min, with the assays performed at 65 °C. By using SYTO-9 as the nucleic acid intercalating dye, the reaction was monitored via real-time fluorescence signal.

RESULTS

There was no observed cross-reactivity among the primers from different species. All 70 field-collected monkey samples were successfully amplified by real-time fluorescence LAMP assays. The detection limit for P. cynomolgi, P. coatneyi and P. knowlesi was 5 × 109 copies/µL. Meanwhile, the detection limit of P. inui was 5 × 1010 copies/µL.

CONCLUSION

This is the first report of the detection of four zoonotic malaria parasites by real-time fluorescence LAMP approaches. It is an effective, rapid and simple-to-use technique. This presented platform exhibits considerable potential as an alternative detection for zoonotic malaria parasites.

Isotope-Edited Variable Temperature Infrared Spectroscopy for Measuring Transition Temperatures of Single A-T Watson-Crick Base Pairs in DNA Duplexes

Experimental methods to determine transition temperatures for individual base pair melting events in DNA duplexes are lacking despite intense interest in these thermodynamic parameters. Here, we determine the dimensions of the thymine (T) C2═O stretching vibration when it is within the DNA duplex via isotopic substitutions at other atomic positions in the structure. First, we determined that this stretching state was localized enough to specific atoms in the molecule to make submolecular scale measurements of local structure and stability in high molecular weight complexes. Next, we develop a new isotope-edited variable temperature infrared method to measure melting transitions at various locations in a DNA structure. As an initial test of this "sub-molecular scale thermometer", we applied our T13C2 difference infrared signal to measure location-dependent melting temperatures (TmL) in a DNA duplex via variable temperature attenuated total reflectance Fourier transform infrared (VT-ATR-FTIR) spectroscopy. We report that the TmL of a single Watson-Crick A-T base pair near the end of an A-T rich sequence (poly T) is ∼34.9 ± 0.7°C. This is slightly lower than the TmL of a single base pair near the middle position of the poly T sequence (TmL ∼35.6±0.2°C). In addition, we also report that the TmL of a single Watson-Crick A-T base pair near the end of a 50% G-C sequence (12-mer) is ∼52.5 ± 0.3°C, which is slightly lower than the global melting Tm of the 12-mer sequence (TmL ∼54.0±0.9°C). Our results provide direct physical evidence for end fraying in DNA sequences with our novel spectroscopic methods.

Techniques, procedures, and applications in host genetic analysis

This chapter overviews genetic techniques' fundamentals and methodological features, including different approaches, analyses, and applications that have contributed to advancing health and disease. The aim is to describe laboratory methodologies and analyses employed to understand the genetic landscape of different biological contexts, from conventional techniques to cutting-edge technologies. Besides describing detailed aspects of the polymerase chain reaction (PCR) and derived types as one of the principles for many novel techniques, we also discuss microarray analysis, next-generation sequencing, and genome editing technologies such as transcription activator-like effector nucleases (TALENs) and the clustered regularly interspaced short palindromic repeats (CRISPR) and CRISPR-associated (Cas) systems. These techniques study several phenotypes, ranging from autoimmune disorders to viral diseases. The significance of integrating diverse genetic methodologies and tools to understand host genetics comprehensively and addressing the ethical, legal, and social implications (ELSI) associated with using genetic information is highlighted. Overall, the methods, procedures, and applications in host genetic analysis provided in this chapter furnish researchers and practitioners with a roadmap for navigating the dynamic landscape of host-genome interactions.

DNA melting analysis

Melting is a fundamental property of DNA that can be monitored by absorbance or fluorescence. PCR conveniently produces enough DNA to be directly monitored on real-time instruments with fluorescently labeled probes or dyes. Dyes monitor the entire PCR product, while probes focus on a specific locus within the amplicon. Advances in amplicon melting include high resolution instruments, saturating DNA dyes that better reveal multiple products, prediction programs for domain melting, barcode taxonomic identification, high speed microfluidic melting, and highly parallel digital melting. Most single base variants and small insertions or deletions can be genotyped by high resolution amplicon melting. High resolution melting also enables heterozygote scanning for any variant within a PCR product. A web application (uMelt, http://www.dna-utah.org) predicts amplicon melting curves with multiple domains, a useful tool for verifying intended products. Additional applications include methylation assessment, copy number determination and verification of sequence identity. When amplicon melting does not provide sufficient detail, unlabeled probes or snapback primers can be used instead of covalently labeled probes. DNA melting is a simple, inexpensive, and powerful tool with many research applications that is beginning to make its mark in clinical diagnostics.

Staining Properties of Selected Commercial Fluorescent Dyes Toward B- and Z-DNA

The properties of six commonly used, commercially available, fluorescent dyes were compared in staining right-handed B-DNA and left-handed Z-DNA. All showed different degree of fluorescence turn-on in the presence of B-DNA, but very little in the presence of Z-DNA. The optimal range of dye-DNA ratios of DNA was determined. While these dyes do not provide a turn-on type probe for Z-DNA, staining between B- and Z-DNA using dyes such as SYBR Green I was shown to be useful in tracking the kinetics of conformational changes between these two forms of DNA. Finally, SYBR Green I showed unique circular dichroism patterns in 4 M NaCl that change in the presence of double stranded DNA, both in the visible and UV range.

Nucleic Acid Plate Culture: Label-Free and Naked-Eye-Based Digital Loop-Mediated Isothermal Amplification in Hydrogel with Machine Learning

Digital nucleic acid amplification enables the absolute quantification of single molecules. However, due to the ultrasmall reaction volume in the digital system (i.e., short light path), most digital systems are limited to fluorescence signals, while label-free and naked-eye readout remain challenging. In this work, we report a digital nucleic acid plate culture method for label-free, ultrasimple, and naked-eye nucleic acid analysis. As simple as the bacteria culture, the nanoconfined digital loop-mediated isothermal amplification was performed by using polyacrylamide (PAM) hydrogel as the amplification matrix. The nanoconfinement of PAM hydrogel with an ionic polymer chain can remarkably accelerate the amplification of target nucleic acids and the growth of inorganic byproducts, namely, magnesium pyrophosphate particles (MPPs). Compared to that in aqueous solutions, MPPs trapped in the hydrogel with enhanced light scattering characteristics are clearly visible to the naked eye, forming white "colony" spots that can be simply counted in a label-free and instrument-free manner. The MPPs can also be photographed by a smartphone and automatically counted by a machine-learning algorithm to realize the absolute quantification of antibiotic-resistant pathogens in diverse real samples.

Traumatic Brain Injury Alters the Trajectory of Age-Related Mitochondrial Change

Background

Some epidemiologic studies associate traumatic brain injury (TBI) with Alzheimer's disease (AD).

Objective

To test whether a TBI-induced acceleration of age-related mitochondrial change could potentially mediate the reported TBI-AD association.

Methods

We administered unilateral controlled cortical impact (CCI) or sham injuries to 5-month-old C57BL/6J and tau transgenic rTg4510 mice. In the non-transgenics, we assessed behavior (1-5 days, 1 month, and 15 months), lesion size (1 and 15 months), respiratory chain enzymes (1 and 15 months), and mitochondrial DNA copy number (mtDNAcn) (1 and 15 months) after CCI/sham. In the transgenics we quantified post-injury mtDNAcn and tangle burden.

Results

In the non-transgenics CCI caused acute behavioral deficits that improved or resolved by 1-month post-injury. Protein-normalized complex I and cytochrome oxidase activities were not significantly altered at 1 or 15 months, although complex I activity in the CCI ipsilesional cortex declined during that period. Hippocampal mtDNAcn was not altered by injury at 1 month, increased with age, and rose to the greatest extent in the CCI contralesional hippocampus. In the injured then aged transgenics, the ipsilesional hippocampus contained less mtDNA and fewer tangles than the contralesional hippocampus; mtDNAcn and tangle counts did not correlate.

Conclusions

As mice age their brains increase mtDNAcn as part of a compensatory response that preserves mitochondrial function, and TBI enhances this response. TBI may, therefore, increase the amount of compensation required to preserve late-life mitochondrial function. If TBI does modify AD risk, altering the trajectory or biology of aging-related mitochondrial changes could mediate the effect.

A Multiplex PCR Melting-Curve-Analysis-Based Detection Method for the Discrimination of Five Aspergillus Species

Aspergillus mold is a ubiquitously found, airborne pathogen that can cause a variety of diseases from mild to life-threatening in severity. Limitations in diagnostic methods combined with anti-fungal resistance render Aspergillus a global emerging pathogen. In industry, Aspergilli produce toxins, such as aflatoxins, which can cause food spoilage and pose public health risk issues. Here, we report a multiplex qPCR method for the detection and identification of the five most common pathogenic Aspergillus species, Aspergillus fumigatus, Aspergillus flavus, Aspergillus niger, Aspergillus terreus, and Aspergillus nidulans. Our approach exploits species-specific nucleotide polymorphisms within their ITS genomic regions. This novel assay combines multiplex single-color real time qPCR and melting curve analysis and provides a straight-forward, rapid, and cost-effective detection method that can identify five Aspergillus species simultaneously in a single reaction using only six unlabeled primers. Due to their unique fragment lengths, the resulting amplicons are directly linked to certain Aspergillus species like fingerprints, following either electrophoresis or melting curve analysis. Our method is characterized by high analytical sensitivity and specificity, so it may serve as a useful and inexpensive tool for Aspergillus diagnostic applications both in health care and the food industry.

PCR inhibitors and facilitators - Their role in forensic DNA analysis

Since its inception, DNA typing technology has been practiced as a robust tool in criminal investigations. Experts usually utilize STR profiles to identify and individualize the suspect. However, mtDNA and Y STR analyses are also considered in some sample-limiting conditions. Based on DNA profiles thus generated, forensic scientists often opine the results as Inclusion, exclusion, and inconclusive. Inclusion and exclusion were defined as concordant results; the inconclusive opinions create problems in conferring justice in a trial- since nothing concrete can be interpreted from the profile generated. The presence of inhibitor molecules in the sample is the primary factor behind these indefinite results. Recently, researchers have been emphasizing studying the sources of PCR inhibitors and their mechanism of inhibition. Furthermore, several mitigation strategies- to facilitate the DNA amplification reaction -have now found their place in the routine DNA typing assays with compromised biological samples. The present review paper attempts to provide a comprehensive review of PCR inhibitors, their source, mechanism of inhibition, and ways to mitigate their effect using PCR facilitators.

Evaluation of A Simple DNA Extraction Method and Its Combination with Loop-Mediated Isothermal Amplification Assays for Rapid Plasmodium knowlesi Diagnosis

The initial and vital stage in the diagnosis of malaria involves extracting DNA. The efficiency of malaria testing is restricted by the multiple steps involved in commercial DNA extraction kits. We attempted to improve an existing loop-mediated isothermal amplification (LAMP) for the detection of Plasmodium knowlesi by using a simple DNA extraction approach, making it a feasible option for mass screening. We utilized a simple nucleic acid extraction method directly from whole blood for the detection of P. knowlesi, taking only 5 min to complete. The extracted DNA was evaluated by two fluorescent-based LAMP and one colorimetric-based LAMP assay. The detection limit for both SYTO-LAMP and SYBR green-LAMP was 0.00001% and 0.0001% parasitemia, respectively. Meanwhile, neutral red-LAMP had a detection limit of 0.01% parasitemia. Combining this simple and inexpensive DNA extraction method, SYTO-LAMP could serve as an alternative molecular diagnosis for the detection of P. knowlesi and other human Plasmodium spp.

Stabilization of the Quadruplex-Forming G-Rich Sequences in the Rhinovirus Genome Inhibits Uncoating-Role of Na+ and K. Viruses 2023;15:1003. [PMID: 37112983 PMCID: PMC10141139 DOI: 10.3390/v15041003]

Rhinoviruses (RVs) are the major cause of common cold, a respiratory disease that generally takes a mild course. However, occasionally, RV infection can lead to serious complications in patients debilitated by other ailments, e.g., asthma. Colds are a huge socioeconomic burden as neither vaccines nor other treatments are available. The many existing drug candidates either stabilize the capsid or inhibit the viral RNA polymerase, the viral proteinases, or the functions of other non-structural viral proteins; however, none has been approved by the FDA. Focusing on the genomic RNA as a possible target for antivirals, we asked whether stabilizing RNA secondary structures might inhibit the viral replication cycle. These secondary structures include G-quadruplexes (GQs), which are guanine-rich sequence stretches forming planar guanine tetrads via Hoogsteen base pairing with two or more of them stacking on top of each other; a number of small molecular drug candidates increase the energy required for their unfolding. The propensity of G-quadruplex formation can be predicted with bioinformatics tools and is expressed as a GQ score. Synthetic RNA oligonucleotides derived from the RV-A2 genome with sequences corresponding to the highest and lowest GQ scores indeed exhibited characteristics of GQs. In vivo, the GQ-stabilizing compounds, pyridostatin and PhenDC3, interfered with viral uncoating in Na+ but not in K+-containing phosphate buffers. The thermostability studies and ultrastructural imaging of protein-free viral RNA cores suggest that Na+ keeps the encapsulated genome more open, allowing PDS and PhenDC3 to diffuse into the quasi-crystalline RNA and promote the formation and/or stabilization of GQs; the resulting conformational changes impair RNA unraveling and release from the virion. Preliminary reports have been published.

Binding, brightness, or noise? Extracting temperature-dependent properties of dye bound to DNA

We present a method for extracting temperature-dependent thermodynamic and photophysical properties of SYTO-13 dye bound to DNA from fluorescence measurements. Together, mathematical modeling, control experiments, and numerical optimization enable dye binding strength, dye brightness, and experimental noise (or error) to be discriminated from one another. By focusing on the low-dye-coverage regime, the model avoids bias and can simplify quantification. Utilizing the temperature-cycling capabilities and multi-reaction chambers of a real-time PCR machine increases throughput. Significant well-to-well and plate-to-plate variation is quantified by using total least squares to account for error in both fluorescence and nominal dye concentration. Properties computed independently for single-stranded DNA and double-stranded DNA by numerical optimization are consistent with intuition and explain the advantageous performance of SYTO-13 in high-resolution melting and real-time PCR assays. Distinguishing between binding, brightness, and noise also clarifies the mechanism for the increased fluorescence of dye in a solution of double-stranded DNA compared to single-stranded DNA; in fact, the explanation changes with temperature.

Strategies for the Voltammetric Detection of Loop-Mediated Isothermal Amplification

Loop-mediated isothermal amplification (LAMP) is rapidly developing into an important tool for the point-of-use detection of pathogens for both clinical and environmental samples, largely due to its sensitivity, rapidity, and adaptability to portable devices. Many methods are used to monitor LAMP, but not all are amenable to point-of-use applications. Common methods such as fluorescence often require bulky equipment, whereas colorimetric and turbidimetric methods can lack sensitivity. Electrochemical biosensors are becoming increasingly important for these applications due to their potential for low cost, high sensitivity, and capacity for miniaturization into integrated devices. This review provides an overview of the use of voltammetric sensors for monitoring LAMP, with a specific focus on how electroactive species are used to interface between the biochemical products of the LAMP reaction and the voltammetric sensor. Various strategies for the voltammetric detection of DNA amplicons as well as pyrophosphate and protons released during LAMP are presented, ranging from direct DNA binding by electroactive species to the creative use of pyrophosphate-detecting aptamers and pH-sensitive oligonucleotide structures. Hurdles for adapting these devices to point-of-use applications are also discussed.

A new fluorescence labeling method for molecular analysis of double-stranded DNA

In this study, a double-stranded DNA (dsDNA) fluorescent labeling method was developed using the fusion proteins of fluorescent protein (FP), and 7 kDa DNA-binding family members including Sso7d from Sulfolobus solfataricus, Aho7c from Acidianus hospitalis, ATSV7 from Acidianus tailed spindle virus and Sto7 from Sulfolobus tokodaii. Using this fluorescent DNA labeling method, we succeeded in single-molecule imaging of bacteriophage λDNA molecules stretched on glass surfaces. The fluorescence of the λDNA with FP fusion proteins decayed 2.4- to 6.4-fold slower than that of the typical intercalating method with SYTOX Green (SxG). In addition, the dynamic behaviors of FP-fused Aho7c-λDNA were relaxed and stretched with and without buffer flow, respectively, in microflow channels and were similar to that with typical intercalating dye, such as YOYO-1 and SxG. this fluorescent DNA labeling method. This fluorescent DNA labeling method can solve the problem of rapid fluorescence decay due to the intercalating dyes and therefore can be expected as an alternative to compound-based fluorescent dye. Thus, this study establishes FP fusion proteins as useful fluorescent DNA probes at the single-molecule level.

Rapid on-site nucleic acid testing: On-chip sample preparation, amplification, and detection, and their integration into all-in-one systems

As nucleic acid testing is playing a vital role in increasingly many research fields, the need for rapid on-site testing methods is also increasing. The test procedure often consists of three steps: Sample preparation, amplification, and detection. This review covers recent advances in on-chip methods for each of these three steps and explains the principles underlying related methods. The sample preparation process is further divided into cell lysis and nucleic acid purification, and methods for the integration of these two steps on a single chip are discussed. Under amplification, on-chip studies based on PCR and isothermal amplification are covered. Three isothermal amplification methods reported to have good resistance to PCR inhibitors are selected for discussion due to their potential for use in direct amplification. Chip designs and novel strategies employed to achieve rapid extraction/amplification with satisfactory efficiency are discussed. Four detection methods providing rapid responses (fluorescent, optical, and electrochemical detection methods, plus lateral flow assay) are evaluated for their potential in rapid on-site detection. In the final section, we discuss strategies to improve the speed of the entire procedure and to integrate all three steps onto a single chip; we also comment on recent advances, and on obstacles to reducing the cost of chip manufacture and achieving mass production. We conclude that future trends will focus on effective nucleic acid extraction via combined methods and direct amplification via isothermal methods.

Identification of extremely GC-rich micro RNAs for RT-qPCR data normalization in human plasma

We aimed at extending the repertoire of high-quality miRNA normalizers for reverse transcription-quantitative PCR (RT-qPCR) of human plasma with special emphasis on the extremely guanine-cytosine-rich portion of the miRNome. For high-throughput selection of stable candidates, microarray technology was preferred over small-RNA sequencing (sRNA-seq) since the latter underrepresented miRNAs with a guanine-cytosine (GC) content of at least 75% (p = 0.0002, n = 2). miRNA abundances measured on the microarray were ranked for consistency and uniformity using nine normalization approaches. The eleven most stable sequences included miRNAs of moderate, but also extreme GC content (45%-65%: miR-320d, miR-425-5p, miR-185-5p, miR-486-5p; 80%-95%: miR-1915-3p, miR-3656-5p, miR-3665-5p, miR-3960-5p, miR-4488-5p, miR-4497 and miR-4787-5p). In contrast, the seven extremely GC-rich miRNAs were not found in the two plasma miRNomes screened by sRNA-seq. Stem-loop RT-qPCR was employed for stability verification in 32 plasma samples of healthy male Caucasians (age range: 18-55 years). In general, inter-individual variance of miRNA abundance was low or very low as indicated by coefficient of variation (CV) values of 0.6%-8.2%. miR-3665 and miR-1915-3p outperformed in this analysis (CVs: 0.6 and 2.4%, respectively). The eight most stable sequences included four extremely GC-rich miRNAs (miR-1915-3p, miR-3665, miR-4787-5p and miR-4497). The best-performing duo normalization factor (NF) for the condition of human plasma, miR-320d and miR-4787-5p, also included a GC-extreme miRNA. In summary, the identification of extremely guanine-cytosine-rich plasma normalizers will help to increase accuracy of PCR-based miRNA quantification, thus raise the potential that miRNAs become markers for psychological stress reactions or early and precise diagnosis of clinical phenotypes. The novel miRNAs might also be useful for orthologous contexts considering their conservation in related animal genomes.

Positive feedback drives a secondary nonlinear product burst during a biphasic DNA amplification reaction

Isothermal DNA amplification reactions are used in a broad variety of applications, from diagnostic assays to DNA circuits, with greater speed and less complexity than established PCR technologies. We recently reported a unique, high gain, biphasic isothermal DNA amplification reaction, called the Ultrasensitive DNA Amplification Reaction (UDAR). Here we present a detailed analysis of the UDAR reaction pathways that initiates with a first phase followed by a nonlinear product burst, which is caused by an autocatalytic secondary reaction. The experimental reaction output was reproduced using an ordinary differential equation model based on detailed reaction mechanisms. This model provides insight on the relative importance of each reaction mechanism during both phases, which could aid in the design of product output during DNA amplification reactions.

Potentials and challenges in the isolation and detection of ascarid eggs in complex environmental matrices

Ascarid infections constitute a major concern for both human and animal health risk assessment. Although being effectively transmitted by soil, water and contaminated food, reliable detection of ascarid eggs in environmental media often remains challenging. However, contamination of the environment with ascarid ova has gained more attention as a decisive part of proper risk assessment in recent years. Due to various factors, such as sample matrices, dissociation detergents and flotation solutions, defined and standardised protocols for the isolation of eggs from complex environmental matrices are difficult to establish and therefore limited. Thus, this study reviews common techniques used for the recovery of ascarid eggs from environmental media with special emphasis on sampling strategies, purification procedures and microscopic as well as molecular detection of egg contamination. Despite various advancements, mainly in the field of molecular methods leading to more reliable and sensitive detection, it can be concluded that there is still a need for unified guidelines for sampling and recovery of ascarid eggs derived from complex environmental matrices.

•

Standardised methods to assess environmental ascarid egg contamination are needed.

•

The environmental sampling strategy has to be adapted to the study hypothesis.

•

Egg detection mostly relies on matrix homogenisation, filtration, sedimentation and flotation.

•

Microscopic detection is still frequently applied.

•

Molecular methods enable more reliable and sensitive detection.

Listeria monocytogenes in foods-From culture identification to whole-genome characteristics

Listeria monocytogenes is an important foodborne pathogen, which is able to persist in the food production environments. The presence of these bacteria in different niches makes them a potential threat for public health. In the present review, the current information on the classical and alternative methods used for isolation and identification of L. monocytogenes in food have been described. Although these techniques are usually simple, standardized, inexpensive, and are routinely used in many food testing laboratories, several alternative molecular-based approaches for the bacteria detection in food and food production environments have been developed. They are characterized by the high sample throughput, a short time of analysis, and cost-effectiveness. However, these methods are important for the routine testing toward the presence and number of L. monocytogenes, but are not suitable for characteristics and typing of the bacterial isolates, which are crucial in the study of listeriosis infections. For these purposes, novel approaches, with a high discriminatory power to genetically distinguish the strains during epidemiological studies, have been developed, e.g., whole-genome sequence-based techniques such as NGS which provide an opportunity to perform comparison between strains of the same species. In the present review, we have shown a short description of the principles of microbiological, alternative, and modern methods of detection of L. monocytogenes in foods and characterization of the isolates for epidemiological purposes. According to our knowledge, similar comprehensive papers on such subject have not been recently published, and we hope that the current review may be interesting for research communities.

Detection and quantification of adulteration in milk and dairy products: A novel and sensitive qPCR-based method

•

A novel qPCR method was able to detect and quantify cow, buffalo, goat and sheep DNA in milk and dairy products.

•

Established detection limit was 0.016 ng for the four species.

•

The limit of detection of cow DNA in buffalo, goat and sheep DNA samples was 0.1% (0.01 ng)

•

This method is able to detect and quantify adulteration between cows, buffaloes, goats and sheep dairy samples.

Species identification in dairy products has a notable importance in food traceability and adulteration control and consequently has a significant effect on the final economic value of foods. In the present study, we developed a method based on real-time quantitative PCR (qPCR) for detection and quantification of cow DNA in DNA samples from milk and dairy products from buffaloes, goats, and sheep. The qPCR reactions showed high specificity, and the amplifications only occurred to species-specific primers. The calibration curves allowed for the quantification of the amount of DNA of each species-specific primer, and the established detection limit was 0.016 ng for the four species. The detection limit of cow DNA in buffalo, goat and sheep DNA samples was 0.1% (0.01 ng). Although the present study aimed to detect and quantify cow DNA in buffalo, goat, and sheep dairy products, we believe that the qPCR assays can also be directed to differentiate and quantify goat × sheep, and/or buffalo × goat/sheep.

Toward a next-generation diagnostic tool: A review on emerging isothermal nucleic acid amplification techniques for the detection of SARS-CoV-2 and other infectious viruses

As the COVID-19 pandemic continues to affect human health across the globe rapid, simple, point-of-care (POC) diagnosis of infectious viruses such as SARS-CoV-2 remains challenging. Polymerase chain reaction (PCR)-based diagnosis has risen to meet these demands and despite its high-throughput and accuracy, it has failed to gain traction in the rapid, low-cost, point-of-test settings. In contrast, different emerging isothermal amplification-based detection methods show promise in the rapid point-of-test market. In this comprehensive study of the literature, several promising isothermal amplification methods for the detection of SARS-CoV-2 are critically reviewed that can also be applied to other infectious viruses detection. Starting with a brief discussion on the SARS-CoV-2 structure, its genomic features, and the epidemiology of the current pandemic, this review focuses on different emerging isothermal methods and their advancement. The potential of isothermal amplification combined with the revolutionary CRISPR/Cas system for a more powerful detection tool is also critically reviewed. Additionally, the commercial success of several isothermal methods in the pandemic are highlighted. Different variants of SARS-CoV-2 and their implication on isothermal amplifications are also discussed. Furthermore, three most crucial aspects in achieving a simple, fast, and multiplexable platform are addressed.

Label-free electrical monitoring of nucleic acid amplification with integrated hydrogel ionic diodes

We demonstrate here for the first time the utility of a monolithically integrated hydrogel ionic diode for label-free quantitative DNA detection and real-time monitoring of nucleic acid amplification. The hydrogel ionic diode presented herein, unlike nanomaterial-based field-effect biosensors, features high cost-effectiveness and convenient fabrication. This is realized by patterning a micrometer-sized heterojunction consisting of adjacent segments of polycationic and polyanionic hydrogels on a microfluidic chip through simple photocuring steps. The integrated diode rectifies ionic currents being sensitive to the charge of DNA adsorbed onto the polycationic chains through electrostatic associations. Based on the mechanism, we show that the ionic biosensor can electrically quantify DNA in a dynamic range relevant to typical nucleic acid amplification assays. Utilizing the device, we demonstrate the evaluation of a PCR assay amplifying a 500-bp DNA fragment of E. coli, an infection-causing pathogen, and real-time in situ monitoring of an isothermal assay amplifying E. coli whole genome. We anticipate that the device could potentially pave the way for miniaturized optics-free platforms for quantifying nucleic acid amplification at point-of-care.

Current commercial dPCR platforms: technology and market review

Digital polymerase chain reaction (dPCR) technology has provided a new technique for molecular diagnostics, with superior advantages, such as higher sensitivity, precision, and specificity over quantitative real-time PCRs (qPCR). Eight companies have offered commercial dPCR instruments: Fluidigm Corporation, Bio-Rad, RainDance Technologies, Life Technologies, Qiagen, JN MedSys Clarity, Optolane, and Stilla Technologies Naica. This paper discusses the working principle of each offered dPCR device and compares the associated: technical aspects, usability, costs, and current applications of each dPCR device. Lastly, up-and-coming dPCR technologies are also presented, as anticipation of how the dPCR device landscape may likely morph in the next few years.

Single-tube collection and nucleic acid analysis of clinical samples for SARS-CoV-2 saliva testing

The SARS-CoV-2 pandemic has brought to light the need for expedient diagnostic testing. Cost and availability of large-scale testing capacity has led to a lag in turnaround time and hindered contact tracing efforts, resulting in a further spread of SARS-CoV-2. To increase the speed and frequency of testing, we developed a cost-effective single-tube approach for collection, denaturation, and analysis of clinical samples. The approach utilizes 1 µL microbiological inoculation loops to collect saliva, sodium dodecyl sulfate (SDS) to inactivate and release viral genomic RNA, and a diagnostic reaction mix containing polysorbate 80 (Tween 80). In the same tube, the SDS-denatured clinical samples are introduced to the mixtures containing all components for nucleic acids detection and Tween 80 micelles to absorb the SDS and allow enzymatic reactions to proceed, obviating the need for further handling of the samples. The samples can be collected by the tested individuals, further decreasing the need for trained personnel to administer the test. We validated this single-tube sample-to-assay method with reverse transcription quantitative real-time polymerase chain reaction (RT-qPCR) and reverse transcription loop-mediated isothermal amplification (RT-LAMP) and discovered little-to-no difference between Tween- and SDS-containing reaction mixtures, compared to control reactions. This approach reduces the logistical burden of traditional large-scale testing and provides a method of deployable point-of-care diagnostics to increase testing frequency.

Portable real-time colorimetric LAMP-device for rapid quantitative detection of nucleic acids in crude samples

Loop-mediated isothermal amplification is known for its high sensitivity, specificity and tolerance to inhibiting-substances. In this work, we developed a device for performing real-time colorimetric LAMP combining the accuracy of lab-based quantitative analysis with the simplicity of point-of-care testing. The device innovation lies on the use of a plastic tube anchored vertically on a hot surface while the side walls are exposed to a mini camera able to take snapshots of the colour change in real time during LAMP amplification. Competitive features are the rapid analysis (< 30 min), quantification over 9 log-units, crude sample-compatibility (saliva, tissue, swabs), low detection limit (< 5 copies/reaction), smartphone-operation, fast prototyping (3D-printing) and ability to select the dye of interest (Phenol red, HNB). The device’s clinical utility is demonstrated in cancer mutations-analysis during the detection of 0.01% of BRAF-V600E-to-wild-type molecules from tissue samples and COVID-19 testing with 97% (Ct < 36.8) and 98% (Ct < 30) sensitivity when using extracted RNA and nasopharyngeal-swabs, respectively. The device high technology-readiness-level makes it a suitable platform for performing any colorimetric LAMP assay; moreover, its simple and inexpensive fabrication holds promise for fast deployment and application in global diagnostics.

Comparison of analytical sensitivity and efficiency for SARS-CoV-2 primer sets by TaqMan-based and SYBR Green-based RT-qPCR

Abstract

The pandemic of coronavirus disease 2019 (COVID-19) continues to threaten public health. For developing countries where vaccines are still in shortage, cheaper alternative molecular methods for SARS-CoV-2 identification can be crucial to prevent the next wave. Therefore, 14 primer sets recommended by the World Health Organization (WHO) was evaluated on testing both clinical patient and environmental samples with the gold standard diagnosis method, TaqMan-based RT-qPCR, and a cheaper alternative method, SYBR Green-based RT-qPCR. Using suitable primer sets, such as ORF1ab, 2019_nCoV_N1 and 2019_nCoV_N3, the performance of the SYBR Green approach was comparable or better than the TaqMan approach, even when considering the newly dominating or emerging variants, including Delta, Eta, Kappa, Lambda, Mu, and Omicron. ORF1ab and 2019_nCoV_N3 were the best combination for sensitive and reliable SARS-CoV-2 molecular diagnostics due to their high sensitivity, specificity, and broad accessibility.

Key points

• With suitable primer sets, the SYBR Green method performs better than the TaqMan one.

• With suitable primer sets, both methods should still detect the new variants well.

• ORF1ab and 2019_nCoV_N3 were the best combination for SARS-CoV-2 detection.

Supplementary Information

The online version contains supplementary material available at 10.1007/s00253-022-11822-4.

A Practical Approach for Quantitative Polymerase Chain Reaction, the Gold Standard in Microbiological Diagnosis

From gene expression studies to identifying microbes, quantitative polymerase chain reaction (qPCR) is widely used in research and medical diagnostics. In transmittable diseases like the Ebola outbreak in West Africa (2014–2016), or the present SARS-CoV2 pandemic qPCR plays a key role in the detection of infected patients. Although the technique itself is decades old with reliable approaches (e.g., TaqMan assay) in the diagnosis of pathogens many people showed distrust in it during the SARS-CoV2 outbreak. This came mainly from not understanding or misunderstanding the principles of qPCR. This situation motivated us to design a simple laboratory practical class, in which students have opportunities to understand the underlying principles of qPCR and its advantages in microbiological diagnosis. Moreover, during the exercise, students can develop skills such as handling experimental assays, and the ability to solve problems, discuss their observations. Finally, this activity brings them closer to the clinical practice and they can see the impact of the science on real life. The class is addressed to undergraduate students of biological sciences.

Fungal infections diagnosis - Past, present and future

Despite the scientific advances observed in the recent decades and the emergence of new methodologies, the diagnosis of systemic fungal infections persists as a problematic issue. Fungal cultivation, the standard method that allows a proven diagnosis, has numerous disadvantages, as low sensitivity (only 50% of the patients present positive fungal cultures), and long growth time. These are factors that delay the patient's treatment and, consequently, lead to higher hospital costs. To improve the accuracy and quickness of fungal infections diagnosis, several new methodologies attempt to be implemented in clinical microbiology laboratories. Most of these innovative methods are independent of pathogen isolation, which means that the diagnosis goes from being considered proven to probable. In spite of the advantage of being culture-independent, the majority of the methods lack standardization. PCR-based methods are becoming more and more commonly used, which has earned them an important place in hospital laboratories. This can be perceived now, as PCR-based methodologies have proved to be an essential tool fighting against the COVID-19 pandemic. This review aims to go through the main steps of the diagnosis for systemic fungal infection, from diagnostic classifications, through methodologies considered as "gold standard", to the molecular methods currently used, and finally mentioning some of the more futuristic approaches.

Detection of herpes simplex virus 2: a SYBR-Green-based real-time PCR assay

The prevalence of Herpes simplex virus 2 (HSV2) is increasing at an alarming rate in the world. Most of the HSV2 cases are not diagnosed properly, although a range of molecular and serological diagnoses exist. Herein, we have reported a very rapid detection method specific for HSV2 using real-time PCR. The primers specific for HSV2 were designed using the Primer-BLAST tool and 120 base pairs of the polymerase gene were amplified using real-time PCR with SYBR Green dye. The designed primer pair was found highly efficient in detecting only HSV2 DNA, but not HSV1. The threshold cycle (Ct) value for HSV2 reactions by designed primers was found to be an average of 22.55 for a standard copy number of viral DNA that may denote the efficiency of the primers. The melting temperature (Tm) of the amplicon using designed primers (82.6 ⁰C) was also higher than that using reference primers (about 78 ⁰C), indicating the high GC content of the amplified template. The designed primer pair will help clinicians to detect the HSV2 DNA specifically and diagnose the associated disease rapidly.

Use of Direct PCR Technique Without DNA Extraction in Confirmation Test for Salmonella typhimurium Bacteria on Meatball Samples

The use of direct PCR technique without DNA extraction in the confirmation test for Salmonella typhimurium ATCC 14028 bacteria on meatball samples was carried out in the Food and Drug molecular biology testing laboratory Administration in Gorontalo. The basis of this research is to have an impact on economic value in carrying out the confirmation test for S. typhimurium ATCC 14028, where testing is carried out conventionally, namely DNA extraction, which requires a large amount of money. Hence, it is necessary to innovate to modify the testing phase so that it is more effective and efficient. The purpose of this study was to see whether the direct PCR technique without DNA extraction can be done for the confirmation test of S. typhimurium ATCC 14028 on meatball samples. This study's sample consisted of 20 types of meatball samples spiked with S. typhimurium ATCC 14028 cultures. The method used in this study was qPCR analysis using the SYBR Green method. Data analysis was carried out based on 2 main criteria: (1) Ct analysis and (2) Tm analysis. Real-time PCR analysis results obtained Ct values ​​in the range 14.14 - 15.20 with an average of 14.82 and Tm values ​​85.20 - 86.30 with an average of 85.79. Based on these data, it can be concluded that using direct PCR can be used for testing confirmation of S. typhimurium ATCC 14028 on meatball samples.

A cost-effective and efficient approach for generating and assembling reagents for conducting real-time PCR

Real-time PCR is a widely used technique for quantification of gene expression. However, commercially available kits for real-time PCR are very expensive. The ongoing coronavirus pandemic has severely hampered the economy in a number of developing countries, resulting in a reduction in available research funding. The fallout of this will result in limiting educational institutes and small enterprises from using cutting edge biological techniques such as real-time PCR. Here, we report a cost-effective approach for preparing and assembling cDNA synthesis and real-time PCR mastermixes with similar efficiencies as commercially available kits. Our results thus demonstrate an alternative to commercially available kits.

Colloidal Self-Assembly Approaches to Smart Nanostructured Materials

Colloidal self-assembly refers to a solution-processed assembly of nanometer-/micrometer-sized, well-dispersed particles into secondary structures, whose collective properties are controlled by not only nanoparticle property but also the superstructure symmetry, orientation, phase, and dimension. This combination of characteristics makes colloidal superstructures highly susceptible to remote stimuli or local environmental changes, representing a prominent platform for developing stimuli-responsive materials and smart devices. Chemists are achieving even more delicate control over their active responses to various practical stimuli, setting the stage ready for fully exploiting the potential of this unique set of materials. This review addresses the assembly of colloids into stimuli-responsive or smart nanostructured materials. We first delineate the colloidal self-assembly driven by forces of different length scales. A set of concepts and equations are outlined for controlling the colloidal crystal growth, appreciating the importance of particle connectivity in creating responsive superstructures. We then present working mechanisms and practical strategies for engineering smart colloidal assemblies. The concepts underpinning separation and connectivity control are systematically introduced, allowing active tuning and precise prediction of the colloidal crystal properties in response to external stimuli. Various exciting applications of these unique materials are summarized with a specific focus on the structure-property correlation in smart materials and functional devices. We conclude this review with a summary of existing challenges in colloidal self-assembly of smart materials and provide a perspective on their further advances to the next generation.

Novel design of nucleic acid standards for hydrolysis probe-based PCR with melting analysis

Probe-based polymerase chain reaction (PCR), a popular method in genetic testing, could be prone to false positive or positively biased results if standards used for positive controls or as calibrants accidentally contaminate samples during analysis. To prevent this, a unique design strategy for nucleic acid standards has been developed. Several in-house designed synthetic standards and corresponding test targets were analysed in specific probe-based PCR assays in the presence of SYTO 82™, an intercalating dye compatible with a probe-labelling FAM (6-Carboxyfluorescein) fluorophore. PCR was followed by melting and fragment size analyses. We showed that a standard can be designed to allow discrimination from the test target in post-PCR melting analysis based on differences in melting temperature (Tm). A good predictor of Tm differences for the paired amplicons was the software package uMelt, but not the length of the amplicons nor guanine-cytosine (GC) content. Tm-based determination can be complimented by electrophoresis to measure differences in amplicons' length. Designing genetic standards using the described method for tests that utilise probe-based PCR will prevent false positive and inaccurate results, while also simplifying the test and reducing its cost.

Development and validation of a one-step reverse transcription loop-mediated isothermal amplification (RT-LAMP) for rapid detection of ZIKV in patient samples from Brazil

We have previously developed and validated a one-step assay based on reverse transcription loop-mediated isothermal amplification (RT-LAMP) for rapid detection of the Zika virus (ZIKV) from mosquito samples. Patient diagnosis of ZIKV is currently carried out in centralized laboratories using the reverse transcription-quantitative polymerase chain reaction (RT-qPCR), which, while the gold standard molecular method, has several drawbacks for use in remote and low-resource settings, such as high cost and the need of specialized equipment. Point-of-care (POC) diagnostic platforms have the potential to overcome these limitations, especially in low-resource countries where ZIKV is endemic. With this in mind, here we optimized and validated our RT-LAMP assay for rapid detection of ZIKV from patient samples. We found that the assay detected ZIKV from diverse sample types (serum, urine, saliva, and semen) in as little as 20 min, without RNA extraction. The RT-LAMP assay was highly specific and up to 100 times more sensitive than RT-qPCR. We then validated the assay using 100 patient serum samples collected from suspected cases of arbovirus infection in the state of Pernambuco, which was at the epicenter of the last Zika epidemic. Analysis of the results, in comparison to RT-qPCR, found that the ZIKV RT-LAMP assay provided sensitivity of 100%, specificity of 93.75%, and an overall accuracy of 95.00%. Taken together, the RT-LAMP assay provides a straightforward and inexpensive alternative for the diagnosis of ZIKV from patients and has the potential to increase diagnostic capacity in ZIKV-affected areas, particularly in low and middle-income countries.

DNA Manipulation and Single-Molecule Imaging

DNA replication, repair, and recombination in the cell play a significant role in the regulation of the inheritance, maintenance, and transfer of genetic information. To elucidate the biomolecular mechanism in the cell, some molecular models of DNA replication, repair, and recombination have been proposed. These biological studies have been conducted using bulk assays, such as gel electrophoresis. Because in bulk assays, several millions of biomolecules are subjected to analysis, the results of the biological analysis only reveal the average behavior of a large number of biomolecules. Therefore, revealing the elementary biological processes of a protein acting on DNA (e.g., the binding of protein to DNA, DNA synthesis, the pause of DNA synthesis, and the release of protein from DNA) is difficult. Single-molecule imaging allows the analysis of the dynamic behaviors of individual biomolecules that are hidden during bulk experiments. Thus, the methods for single-molecule imaging have provided new insights into almost all of the aspects of the elementary processes of DNA replication, repair, and recombination. However, in an aqueous solution, DNA molecules are in a randomly coiled state. Thus, the manipulation of the physical form of the single DNA molecules is important. In this review, we provide an overview of the unique studies on DNA manipulation and single-molecule imaging to analyze the dynamic interaction between DNA and protein.

Ozonation enhancement of low cost double-stranded DNA binding dye based fluorescence measurement of total bacterial load in water

We demonstrated the feasibility of using ozonation to enhance the performance of dsDNA binding dye SYBR Green I in the fluorescence measurement of total bacterial load in water. Unlike its membrane permeable but expensive equivalent such as SYTO82 dye, SYBR Green I is many times cheaper but membrane impermeable. Ozonation allowed SYBR Green I dye to permeate the membrane and bind with the dsDNA within by first breaching it. Using E. coli K12 bacteria at serial dilution ratios from 1/1 (980 CFU mL⁻¹) to 1/200, we achieved corresponding quantification from 618.7 ± 9.4 to 68.0 ± 1.9 RFU (100 to 11.00% normalized RFU). In comparison, plate counting and optical density measurement were only able to quantify up till a serial dilution ratio of 1/50 (40 CFU mL⁻¹ and 0.0421, respectively). Most importantly with ozonation, the sensitivity of SYBR Green I dye based fluorescence measurement was improved by ∼140 to 210% as compared to that without ozonation. Given its low electrical power consumption, lab-on-chip compatibility and reagent-less nature, ozonation is highly compatible with portable fluorimeters to realize low-cost monitoring of total bacterial load in water.

Principle of ozonation enhanced dsDNA binding dye based fluorescence measurement of total bacterial load in water.

Use of Ionic Liquids in Protein and DNA Chemistry

Ionic liquids (ILs) have been receiving much attention as solvents in various areas of biochemistry because of their various beneficial properties over the volatile solvents and ILs availability in myriad variants (perhaps as many as 108) owing to the possibility of paring one cation with several anions and vice-versa as well as formulations as zwitterions. Their potential as solvents lies in their tendency to offer both directional and non-directional forces toward a solute molecule. Because of these forces, ionic liquids easily undergo intermolecular interactions with a range of polar/non-polar solutes, including biomolecules such as proteins and DNA. The interaction of genomic species in aqueous/non-aqueous states assists in unraveling their structure and functioning, which have implications in various biomedical applications. The charge density of ionic liquids renders them hydrophilic and hydrophobic, which retain intact over long-range of temperatures. Their ability in stabilizing or destabilizing the 3D-structure of a protein or the double-helical structure of DNA has been assessed superior to the water and volatile organic solvents. The aptitude of an ion in influencing the structure and stability of a native protein depends on their ranking in the Hofmeister series. However, at several instances, a reverse Hofmeister ordering of ions and specific ion-solute interaction has been observed. The capability of an ionic liquid in terms of the tendency to promote the coiling/uncoiling of DNA structure is noted to rely on the basicity, electrostatic interaction, and hydrophobicity of the ionic liquid in question. Any change in the DNA's double-helical structure reflects a change in its melting temperature (T m), compared to a standard buffer solution. These changes in DNA structure have implications in biosensor design and targeted drug-delivery in biomedical applications. In the current review, we have attempted to highlight various aspects of ionic liquids that influence the structure and properties of proteins and DNA. In short, the review will address the issues related to the origin and strength of intermolecular interactions, the effect of structural components, their nature, and the influence of temperature, pH, and additives on them.

High-throughput methods for measuring DNA thermodynamics

Understanding the thermodynamics of DNA motifs is important for prediction and design of probes and primers, but melt curve analyses are low-throughput and produce inaccurate results for motifs such as bulges and mismatches. Here, we developed a new, accurate and high-throughput method for measuring DNA motif thermodynamics called TEEM (Toehold Exchange Energy Measurement). It is a refined framework of comparing two toehold exchange reactions, which are competitive strand displacement between oligonucleotides. In a single experiment, TEEM can measure over 1000 ΔG° values with standard error of roughly 0.05 kcal/mol.

[Detection methods for results of a loop-mediated isothermal amplification of DNA.]

The loop mediated isothermal amplification (LAMP) was developed by T. Notomi et al. in 2000. It has become one of the most promising methods for point-of-care diagnostics due to its accuracy, sensitivity and ease of execution. In this review, various methods for detecting the results of the LAMP reaction are considered; their advantages and disadvantages are revealed. Methods for detecting LAMP results can be divided into indirect and direct. Indirect methods aimed at detecting changes in the chemical composition of the reaction mixture include real-time turbidimetry, fluorescence detection with calcein, colorimetric detection with hydroxynaphthol blue, and detection using modified gold nanoparticles. Direct methods based on the detection of accumulation amplicons during the reaction include fluorimetric detection with intercalating dyes, resonance fluorescence energy transfer, enzyme immunoassay, immunochromatography, using cationic polymers and gold nanoparticles. The development in the field of point-of-care diagnostics is characterized by a pronounced tendency to miniaturization, the LAMP reaction on microchips and microfluidic devices with an electrochemical or optical detection method. The most promising for the diagnosis of infectious diseases are turbidimetry methods and the use of intercalating dyes. The development of portable domestic instruments for detecting of LAMP results based on real-time fluorescence detection or turbidimetry will contribute to the widespread introduction of the method into clinical laboratory diagnostic practice. A literature research was conducted in the Pubmed ncbi based on keywords.

Clip-to-release on amplification (CRoA): a novel DNA amplification enhancer on and off microfluidics

Despite its high sensitivity, low cost, and high efficiency as a DNA amplification indicator with a yes/no answer, dsDNA-binding dye encounters incompatibility when used in microfluidic systems, resulting in problems such as false negative amplification results. Besides, its inhibition of amplification at high concentrations hinders its application both on-chip and off-chip. In this study, we propose a novel DNA amplification enhancer to counteract the drawbacks of dsDNA-binding dyes. It acts as a temporary reservoir for the free-floating dyes in solution and releases them on demand during the amplification process. Through this clip-to-release on amplification mechanism, the enhancer lowered the background fluorescence of sample droplets before amplification, enhanced the signal-to-background ratio of positive samples, and eliminated the false negative signal of on-chip PCR. Moreover, the enhancer increased the off-chip polymerase chain reaction (PCR) efficiency, boosted the fluorescence signal up to 10-fold, and made less nonspecific amplification product. All the factors affecting the enhancer's performance are investigated in detail, including its structure and concentration, and the types of dsDNA-binding dye used in the reaction. Finally, we demonstrated the broad application of the proposed amplification enhancer in various DNA amplification systems, for various genes, and on various amplification platforms. It would reignite the utilization of dsDNA dyes for wider applications in DNA analysis both on-chip and off-chip.

Rolling circle amplification-driven encoding of different fluorescent molecules for simultaneous detection of multiple DNA repair enzymes at the single-molecule level

Integration of single-molecule detection with rolling circle amplification-driven encoding of different fluorescent molecules enables simultaneous detection of multiple DNA repair enzymes.

DNA repair enzymes (e.g., DNA glycosylases) play a critical role in the repair of DNA lesions, and their aberrant levels are associated with various diseases. Herein, we develop a sensitive method for simultaneous detection of multiple DNA repair enzymes based on the integration of single-molecule detection with rolling circle amplification (RCA)-driven encoding of different fluorescent molecules. We use human alkyladenine DNA glycosylase (hAAG) and uracil DNA glycosylase (UDG) as the target analytes. We design a bifunctional double-stranded DNA (dsDNA) substrate with a hypoxanthine base (I) in one strand for hAAG recognition and an uracil (U) base in the other strand for UDG recognition, whose cleavage by APE1 generates two corresponding primers. The resultant two primers can hybridize with their respective circular templates to initiate RCA, resulting in the incorporation of multiple Cy3-dCTP and Cy5-dGTP nucleotides into the amplified products. After magnetic separation and exonuclease cleavage, the Cy3 and Cy5 fluorescent molecules in the amplified products are released into the solution and subsequently quantified by total internal reflection fluorescence (TIRF)-based single-molecule detection, with Cy3 indicating the presence of hAAG and Cy5 indicating the presence of UDG. This strategy greatly increases the number of fluorescent molecules per concatemer through the introduction of RCA-driven encoding of different fluorescent molecules, without the requirement of any specially labeled detection probes for simultaneous detection. Due to the high amplification efficiency of RCA and the high signal-to-ratio of single-molecule detection, this method can achieve a detection limit of 6.10 × 10^–9 U mL^–1 for hAAG and 1.54 × 10^–9 U mL^–1 for UDG. It can be further applied for simultaneous detection of multiple DNA glycosylases in cancer cells at the single-cell level and the screening of DNA glycosylase inhibitors, holding great potential in early clinical diagnosis and drug discovery.

PCR inhibition in qPCR, dPCR and MPS-mechanisms and solutions

DNA analysis has seen an incredible development in terms of instrumentation, assays and applications over the last years. Massively parallel sequencing (MPS) and digital PCR are now broadly applied in research and diagnostics, and quantitative PCR is used for more and more practises. All these techniques are based on in vitro DNA polymerization and fluorescence measurements. A major limitation for successful analysis is the various sample-related substances that interfere with the analysis, i.e. PCR inhibitors. PCR inhibition affects library preparation in MPS analysis and skews quantification in qPCR, and some inhibitors have been found to quench the fluorescence of the applied fluorophores. Here, we provide a deeper understanding of mechanisms of specific PCR inhibitors and how these impact specific analytical techniques. This background knowledge is necessary in order to take full advantage of modern DNA analysis techniques, specifically for analysis of samples with low amounts of template and high amounts of background material. The classical solution to handle PCR inhibition is to purify or dilute DNA extracts, which leads to DNA loss. Applying inhibitor-tolerant DNA polymerases, either single enzymes or blends, provides a more straightforward and powerful solution. This review includes mechanisms of specific PCR inhibitors as well as solutions to the inhibition problem in relation to cutting-edge DNA analysis.

Total mRNA Quantification in Single Cells: Sarcoma Cell Heterogeneity

Single-cell analysis enables detailed molecular characterization of cells in relation to cell type, genotype, cell state, temporal variations, and microenvironment. These studies often include the analysis of individual genes and networks of genes. The total amount of RNA also varies between cells due to important factors, such as cell type, cell size, and cell cycle state. However, there is a lack of simple and sensitive methods to quantify the total amount of RNA, especially mRNA. Here, we developed a method to quantify total mRNA levels in single cells based on global reverse transcription followed by quantitative PCR. Standard curve analyses of diluted RNA and sorted cells showed a wide dynamic range, high reproducibility, and excellent sensitivity. Single-cell analysis of three sarcoma cell lines and human fibroblasts revealed cell type variations, a lognormal distribution of total mRNA levels, and up to an eight-fold difference in total mRNA levels among the cells. The approach can easily be combined with targeted or global gene expression profiling, providing new means to study cell heterogeneity at an individual gene level and at a global level. This method can be used to investigate the biological importance of variations in the total amount of mRNA in healthy as well as pathological conditions.

Fractal LAMP: Label-Free Analysis of Fractal Precipitate for Digital Loop-Mediated Isothermal Nucleic Acid Amplification

Nucleic acid amplification assays including loop-mediated isothermal amplification (LAMP) are routinely used in diagnosing diseases and monitoring water and food quality. The results of amplification in these assays are commonly measured with an analog fluorescence readout, which requires specialized optical equipment and can lack quantitative precision. Digital analysis of amplification in small fluid compartments based on exceeding a threshold fluorescence level can enhance the quantitative precision of nucleic acid assays (i.e., digital nucleic acid amplification assays), but still requires specialized optical systems for fluorescence readout and the inclusion of a fluorescent dye. Here, we report Fractal LAMP, an automated method to detect amplified DNA in subnanoliter scale droplets following LAMP in a label-free manner. Our computer vision algorithm achieves high accuracy detecting DNA amplification in droplets by identifying LAMP byproducts that form fractal structures observable in brightfield microscopy. The capabilities of Fractal LAMP are further realized by developing a Bayesian model to estimate DNA concentrations for unknown samples and a bootstrapping method to estimate the number of droplets required to achieve target limits of detection. This digital, label-free assay has the potential to lower reagent and reader cost for nucleic acid measurement while maintaining high quantitative accuracy over 3 orders of magnitude of concentration.

Detection of extended-spectrum beta-lactamase cefotaxime resistance and virulence genes in Escherichia coli by duplex quantitative real-time PCR and melt curve analysis

Emerging virulent and antibiotic-resistant pathogens present a global public health risk. Routine monitoring of prevalence within the clinical, environmental and food production setting is vital. Quantitative real-time PCR (qPCR) coupled with melting curve analysis can rapidly and accurately characterize pathogens. We evaluated commercial qPCR mixes based on SYBR Green l and EvaGreen for developing an assay for simultaneously detecting antibiotic resistance (extended-spectrum beta-lactamase, ESBL and bla_CTX-M ) and virulence (stx1, stx2 and eae) genes in Escherichia coli (n = 12) isolated from irrigation water and irrigated vegetables. SYBR Green and EvaGreen detected two amplicons (stx1 and bla_CTX-M ) and (stx2 and eae) in a single reaction. A higher mean melting temperature (T_m ) separation between targeted amplicons and smoother melting curves were observed with the EvaGreen suggesting better performance when targeting multiple amplicons. Through simple stepwise optimization of DNA, cycling, primers, reaction volume and melting curve scanning rate, we adopted a conventional PCR assay for detection of large amplicons (375-1580 bp) for qPCR. This may facilitate development of cost-effective tailor-made assays for rapid and accurate monitoring of emerging foodborne and environmental pathogens in resource constrained regions.