Rapid detection of Phytophthora ramorum and P. kernoviae by two-minute DNA extraction followed by isothermal amplification and amplicon detection by generic lateral flow device

Rapid Detection of a Downy Mildew Pathogen, Peronospora destructor, in Infected Onion Tissues and Soils by Loop-Mediated Isothermal Amplification

Downy mildew of onion caused by a soil-inhabiting water mold, Peronospora destructor, is one of the most devastating diseases that can destroy entire onion fields in a matter of days. In this study, we developed a loop-mediated isothermal amplification (LAMP) assay that allows for rapid detection of P. destructor by visual inspection. The internal transcribed spacer 2 region of P. destructor was used to design primer sets for LAMP reactions. The optimal temperature and incubation time were determined for the most efficient primer set. In the optimized condition, the LAMP assay exhibited at least 100 times more sensitivity than conventional PCR, detecting femtogram levels of P. destructor genomic DNA (gDNA). Detection of the pathogen from a small number of spores without gDNA extraction further confirmed the high sensitivity of the assay. For specificity, the LAMP assay was negative for gDNA of other fungal pathogens that cause various diseases on onion and oomycetes, whereas the assay was positive for gDNA extracted from onion tissues showing the typical downy mildew symptoms. Finally, we examined the efficacy of the LAMP assay in detection of P. destructor in soils. Soils collected from onion fields that had been contaminated with P. destructor were solarized for 60 days. Whereas the LAMP assay was negative for the solarized soils, we were able to detect P. destructor that oversummers in fields. The LAMP assay developed in this study enables rapid detection and diagnosis of downy mildew of onion in infected tissues and in soil.

Low-High-Low Rotationally Pulse-Actuated Serial Dissolvable Film Valves Applied to Solid Phase Extraction and LAMP Isothermal Amplification for Plant Pathogen Detection on a Lab-on-a-Disc

The ability of the centrifugal Lab-on-a-Disc (LoaD) platform to closely mimic the "on bench" liquid handling steps (laboratory unit operations (LUOs)) such as metering, mixing, and aliquoting supports on-disc automation of bioassay without the need for extensive biological optimization. Thus, well-established bioassays, normally conducted manually using pipettes or using liquid handling robots, can be relatively easily automated in self-contained microfluidic chips suitable for use in point-of-care or point-of-use settings. The LoaD's ease of automation is largely dependent on valves that can control liquid movement on the rotating disc. The optimum valving strategy for a true low-cost and portable device is rotationally actuated valves, which are actuated by changes in the disc spin-speed. However, due to tolerances in disc manufacturing and variations in reagent properties, most of these valving technologies have inherent variation in their actuation spin-speed. Most valves are actuated through stepped increases in disc spin-speed until the motor reaches its maximum speed (rarely more than 6000 rpm). These manufacturing tolerances combined with this "analogue" mechanism of valve actuation limits the number of LUOs that can be placed on-disc. In this work, we present a novel valving mechanism called low-high-low serial dissolvable film (DF) valves. In these valves, a DF membrane is placed in a dead-end pneumatic chamber. Below an actuation spin-speed, the trapped air prevents liquid wetting and dissolving the membrane. Above this spin-speed, the liquid will enter and wet the DF and open the valve. However, as DFs take ∼40 s to dissolve, the membrane can be wetted, and the disc spin-speed reduced before the film opens. Thus, by placing valves in a series, we can govern on which "digital pulse" in spin-speeding a reagent is released; a reservoir with one serial valve will open on the first pulse, a reservoir with two serial valves on the second, and so on. This "digital" flow control mechanism allows the automation of complex assays with high reliability. In this work, we first describe the operation of the valves, outline the theoretical basis for their operation, and support this analysis with an experiment. Next, we demonstrate how these valves can be used to automate the solid-phase extraction of DNA on on-disc LAMP amplification for applications in plant pathogen detection. The disc was successfully used to extract and detect, from a sample lysed off-disc, DNA indicating the presence of thermally inactivated Clavibacter michiganensis ssp. michiganensis (Cmm), a bacterial pathogen on tomato leaf samples.

Cross-pathogenicity of Phytophthora palmivora associated with bud rot disease of oil palm and development of biomarkers for detection

Phytophthora palmivora has caused disease in many crops including oil palm in the South America region. The pathogen has had a significant economic impact on oil palm cultivation in Colombia, and therefore poses a threat to oil palm cultivation in other regions of the World, especially in Southeast Asia, the largest producer of the crop. This study aimed to look at the ability of isolates from Malaysia, Colombia, and other regions to cross-infect Malaysian oil palm, durian, and cocoa and to develop specific biomarkers and assays for identification, detection, and diagnosis of P. palmivora as a key component for the oil palm biosecurity continuum in order to contain the disease especially at the ports of entry. We have developed specific molecular biomarkers to identify and detect Phytophthora palmivora using polymerase chain reaction (PCR) and real-time loop mediated isothermal amplification (rt-LAMP) in various sample types such as soil and plants. The limit of detection (DNA template, pure culture assay) for the PCR assay is 5.94 × 10-2 ng µl-1 and for rt-LAMP is 9.28 × 10-4 ng µl-1. Diagnosis using rt-LAMP can be achieved within 30 min of incubation. In addition, PCR primer pair AV3F/AV3R developed successfully distinguished the Colombian and Malaysian P. palmivora isolates.

CRISPR/Cas12a-based approaches for efficient and accurate detection of Phytophthora ramorum

Introduction

Phytophthora ramorum is a quarantine pathogen that causes leaf blight and shoot dieback of the crown, bark cankers and death on a number of both ornamental and forest trees, especially in North America and northern Europe, where it has produced severe outbreaks. Symptoms caused by P. ramorum can be confused with those by other Phytophthora and fungal species. Early and accurate detection of the causal pathogen P. ramorum is crucial for effective prevention and control of Sudden Oak Death.

Methods

In this study, we developed a P. ramorum detection technique based on a combination of recombinase polymerase amplification (RPA) with CRISPR/Cas12a technology (termed RPACRISPR/ Cas12a).

Results

This novel method can be utilized for the molecular identification of P. ramorum under UV light and readout coming from fluorophores, and can specifically detect P. ramorum at DNA concentrations as low as 100 pg within 25 min at 37°C.

Discussion

We have developed a simple, rapid, sensitive, unaided-eye visualization, RPA CRISPR/Cas12a-based detection system for the molecular identification of P. ramorum that does not require technical expertise or expensive ancillary equipment. And this system is sensitive for both standard laboratory samples and samples from the field.

Novel Identification of the Collection of Pathogenic Fungal Species Verticillium with the Development of Species-Specific SSR Markers

The genus Verticillium is a group of ascomycete fungi that includes several pathogenic plant species. In 2011, a new taxonomic classification, proposed by Inderbitzin and coworkers (2011), re-defined the genus as Verticillium sensu stricto. The objective of our study was the re-classification of the fungal species held in the culture collection in the Slovenian Institute of Hop Research and Brewing in accordance with the newly established taxonomy. With the PCR marker system proposed by Inderbitzin and coworkers in 2011, we re-classified 88 Verticillium isolates out of the 105 samples that are held in the institute's bank, which were obtained from different geographic locations in Europe, North America, and Japan, and from different host plants, including alfalfa, cotton, hop, olive, potato, and tomato. However, the PCR marker for the V. dahliae identification proved to be less specific, and it resulted in the positive amplification of Gibellulopsis nigrescens, V. isaacii, and V. longisporum. To enable the accurate distinction of the fungi, the SSR and LAMP markers were added to the analyses. The 12 newly identified SSR markers, which were used in simplex PCR reactions or in combination, enabled the accurate identification of all included Verticillium isolates and could potentially be used as biomarkers for rapid and easy species identification.

Plant pathogen detection on a lab-on-a-disc using solid-phase extraction and isothermal nucleic acid amplification enabled by digital pulse-actuated dissolvable film valves

By virtue of its ruggedness, portability, rapid processing times, and ease-of-use, academic and commercial interest in centrifugal microfluidic systems has soared over the last decade. A key advantage of the LoaD platform is the ability to automate laboratory unit operations (LUOs) (mixing, metering, washing etc.) to support direct translation of 'on-bench' assays to 'on-chip'. Additionally, the LoaD requires just a low-cost spindle motor rather than specialized and expensive microfluidic pumps. Furthermore, when flow control (valves) is implemented through purely rotational changes in this same spindle motor (rather than using additional support instrumentation), the LoaD offers the potential to be a truly portable, low-cost and accessible platform. Current rotationally controlled valves are typically opened by sequentially increasing the disc spin-rate to a specific opening frequency. However, due lack of manufacturing fidelity these specific opening frequencies are better described as spin frequency 'bands'. With low-cost motors typically having a maximum spin-rate of 6000 rpm (100 Hz), using this 'analogue' approach places a limitation on the number of valves, which can be serially actuated thus limiting the number of LUOs that can be automated. In this work, a novel flow control scheme is presented where the sequence of valve actuation is determined by architecture of the disc while its timing is governed by freely programmable 'digital' pulses in its spin profile. This paradigm shift to 'digital' flow control enables automation of multi-step assays with high reliability, with full temporal control, and with the number of LUOs theoretically only limited by available space on the disc. We first describe the operational principle of these valves followed by a demonstration of the capability of these valves to automate complex assays by screening tomato leaf samples against plant pathogens. Reagents and lysed sample are loaded on-disc and then, in a fully autonomous fashion using only spindle-motor control, the complete assay is automated. Amplification and fluorescent acquisition take place on a custom spin-stand enabling the generation of real-time LAMP amplification curves using custom software. To prevent environmental contamination, the entire discs are sealed from atmosphere following loading with internal venting channels permitting easy movement of liquids about the disc. The disc was successfully used to detect the presence of thermally inactivated Clavibacter michiganensis. Michiganensis (CMM) bacterial pathogen on tomato leaf samples.

Global distribution, traditional and modern detection, diagnostic, and management approaches of Rhizoctonia solani associated with legume crops

Sustainable development relies heavily on a food system that is both safe and secure. Several approaches may lead to sustainability and food safety. An increase in the cultivation of legume crops is one of the approaches for enhancing agricultural viability and ensuring adequate food supply. Legumes may increase daily intake of fiber, folate, and protein as substitutes for meat and dairy. They are also crucial in various intercropping systems worldwide. However, legume production has been hampered by Rhizoctonia solani due to its destructive lifestyle. R. solani causes blights, damping off, and rotting diseases in legume crops. Our knowledge of the global distribution of R. solani associated with legume crops (alfalfa, soybean, chickpea, pea, lentil, common bean, and peanut), detection, diagnosis, and management of legume crops diseases caused by R. solani is limited. Traditional approaches rely on the incubation of R. solani, visual examination of symptoms on host legume crops, and microscopy identification. However, these approaches are time-consuming, require technical expertise, fail to detect a minimal amount of inoculum, and are unreliable. Biochemical and molecular-based approaches have been used with great success recently because of their excellent sensitivity and specificity. Along with conventional PCR, nested PCR, multiplex PCR, real-time PCR, magnetic-capture hybridization PCR, and loop-mediated isothermal amplification have been widely used to detect and diagnose R. solani. In the future, Next-generation sequencing will likely be used to a greater extent to detect R. solani. This review outlines global distribution, survival, infection and disease cycle, traditional, biochemical, molecular, and next-generation sequencing detection and diagnostic approaches, and an overview of the resistant resources and other management strategies to cope with R. solani.

Real-Time Portable LAMP Assay for a Rapid Detection of Xylella fastidiosa In-Field

Early diagnosis is part of a decision-making process which in the case of plant diseases may prevent the spread of invasive plant pathogens and assist in their eradication. Significant advantages could be obtained from moving testing technology closer to the sampling site, thereby reducing the detection time. This chapter describes a portable real-time LAMP assay for a specific detection of Xylella fastidiosa in-field. The LAMP assay, including DNA extraction, allows a complete and specific in-field analysis in just 40 minutes, enabling the detection of pathogen DNA in host tissues.

Onsite detection of plant viruses using isothermal amplification assays

Plant diseases caused by viruses limit crop production and quality, resulting in significant losses. However, options for managing viruses are limited; for example, as systemic obligate parasites, they cannot be killed by chemicals. Sensitive, robust, affordable diagnostic assays are needed to detect the presence of viruses in plant materials such as seeds, vegetative parts, insect vectors, or alternative hosts and then prevent or limit their introduction into the field by destroying infected plant materials or controlling insect hosts. Diagnostics based on biological and physical properties are not very sensitive and are time-consuming, but assays based on viral proteins and nucleic acids are more specific, sensitive, and rapid. However, most such assays require laboratories with sophisticated equipment and technical skills. By contrast, isothermal-based assays such as loop-mediated isothermal amplification (LAMP) and recombinase polymerase amplification (RPA) are simple, easy to perform, reliable, specific, and rapid and do not require specialized equipment or skills. Isothermal amplification assays can be performed using lateral flow devices, making them suitable for onsite detection or testing in the field. To overcome non-specific amplification and cross-contamination issues, isothermal amplification assays can be coupled with CRISPR/Cas technology. Indeed, the collateral activity associated with some CRISPR/Cas systems has been successfully harnessed for visual detection of plant viruses. Here, we briefly describe traditional methods for detecting viruses and then examine the various isothermal assays that are being harnessed to detect viruses.

A loop-mediated isothermal amplification (LAMP) assay for the detection of Cryptotermes brevis West Indian drywood termite (Blattodea: Kalotermitidae)

Cryptotermes brevis is one of the most destructive invasive termites in the subtropics and tropics and is a common biosecurity intercept at the Australian border. Drywood termite species are cryptic and difficult to identify morphologically in situations when soldiers or imagos are unavailable. We developed a novel DNA based loop-mediated isothermal amplification (LAMP) assay to detect C. brevis and differentiate it from other drywood termites. Validated voucher specimens of 30 different drywood termite species were obtained from several insect collections from which DNA was extracted and amplified. The amplicons containing partial mitochondrial 16S rRNA were sequenced and a DNA database was created from which C. brevis LAMP primers were developed, optimized, and tested. The assay was assessed against a range of target and non-target species and found to be specific, successfully amplifying the target specimens of C. brevis in under 30 min. Amplification success was variable against C. brevis faecal pellets due to minute, unmeasurable or degraded DNA. This LAMP test is a new tool for the rapid detection of C. brevis that will enable faster and less destructive management of drywood termite infestations.

Unreacted Labeled PCR Primers Inhibit the Signal in a Nucleic Acid Lateral Flow Assay as Elucidated by a Transport Reaction Model

Factors that affect the performance of the nucleic acid lateral flow assay (NALFA) have not been well studied. In this work, we identify two important phenomena that negatively affect signal intensities during the detection of PCR products using NALFA: (i) the presence of unreacted PCR primers, and (ii) the presence of excess PCR amplicons. This is the first report that highlights the negative effect of unreacted PCR primers on NALFA. The negative effect of excess amplicons, while not explicitly reported for NALFAs, emanates from an identical phenomenon in lateral flow immunoassays known as the "hook effect". We show that the above effects may be alleviated by increasing the concentration of capture antibodies at the test line and the concentration of reporter moieties (gold nanoparticles). To demonstrate these, we utilized a PCR assay in which both primers were end-labeled, to generate dually end-labeled (bi-labeled) PCR amplicons of 230 bp length. To provide mechanistic understanding of these phenomena, we present the first transport-reaction model of NALFA, the results of which qualitatively matched all observed phenomena. Based on these results, we provide recommendations for the optimal design of PCR for NALFA detection.

Phytophthora: an ancient, historic, biologically and structurally cohesive and evolutionarily successful generic concept in need of preservation

The considerable economic and social impact of the oomycete genus Phytophthora is well known. In response to evidence that all downy mildews (DMs) reside phylogenetically within Phytophthora, rendering Phytophthora paraphyletic, a proposal has been made to split the genus into multiple new genera. We have reviewed the status of the genus and its relationship to the DMs. Despite a substantial increase in the number of described species and improvements in molecular phylogeny the Phytophthora clade structure has remained stable since first demonstrated in 2000. Currently some 200 species are distributed across twelve major clades in a relatively tight monophyletic cluster. In our assessment of 196 species for twenty morphological and behavioural criteria the clades show good biological cohesion. Saprotrophy, necrotrophy and hemi-biotrophy of woody and non-woody roots, stems and foliage occurs across the clades. Phylogenetically less related clades often show strong phenotypic and behavioural similarities and no one clade or group of clades shows the synapomorphies that might justify a unique generic status. We propose the clades arose from the migration and worldwide radiation ~ 140 Mya (million years ago) of an ancestral Gondwanan Phytophthora population, resulting in geographic isolation and clade divergence through drift on the diverging continents combined with adaptation to local hosts, climatic zones and habitats. The extraordinary flexibility of the genus may account for its global 'success'. The 20 genera of the obligately biotrophic, angiosperm-foliage specialised DMs evolved from Phytophthora at least twice via convergent evolution, making the DMs as a group polyphyletic and Phytophthora paraphyletic in cladistic terms. The long phylogenetic branches of the DMs indicate this occurred rather rapidly, via paraphyletic evolutionary 'jumps'. Such paraphyly is common in successful organisms. The proposal to divide Phytophthora appears more a device to address the issue of the convergent evolution of the DMs than the structure of Phytophthora per se. We consider it non-Darwinian, putting the emphasis on the emergent groups (the DMs) rather than the progenitor (Phytophthora) and ignoring the evolutionary processes that gave rise to the divergence. Further, the generic concept currently applied to the DMs is narrower than that between some closely related Phytophthora species. Considering the biological and structural cohesion of Phytophthora, its historic and social impacts and its importance in scientific communication and biosecurity protocol, we recommend that the current broad generic concept is retained by the scientific community.

Loop-Mediated Isothermal Amplification (LAMP) and SYBR Green qPCR for Fast and Reliable Detection of Geosmithia morbida (Kolařik) in Infected Walnut

Walnut species (Juglans spp.) are multipurpose trees, widely employed in plantation forestry for high-quality timber and nut production, as well as in urban greening as ornamental plants. These species are currently threatened by the thousand cankers disease (TCD) complex, an insect-fungus association which involves the ascomycete Geosmithia morbida (GM) and its vector, the bark beetle Pityophthorus juglandis. While TCD has been studied extensively where it originated in North America, little research has been carried out in Europe, where it was more recently introduced. A key step in research to cope with this new phytosanitary emergency is the development of effective molecular detection tools. In this work, we report two accurate molecular methods for the diagnosis of GM, based on LAMP (real-time and visual) and SYBR Green qPCR, which are complimentary to and integrated with similar recently developed assays. Our protocols detected GM DNA from pure mycelium and from infected woody tissue with high accuracy, sensitivity, and specificity, without cross-reactivity to a large panel of taxonomically related species. The precision and robustness of our tests guarantee high diagnostic standards and could be used to support field diagnostic end-users in TCD monitoring and surveillance campaigns.

An Advanced One-Step RT-LAMP for Rapid Detection of Little cherry virus 2 Combined with High-Throughput Sequence-Based Phylogenomics Reveal Divergent Flowering Cherry Isolates

Little cherry virus 2 (LChV-2, genus Ampelovirus) is considered to be the main causal agent of the economically damaging little cherry disease, which can only be controlled by removal of infected trees. The widespread viral disease of sweet cherry (Prunus avium L.) is affecting the survival of long-standing orchards in North America and Europe, hence the dire need for an early and accurate diagnosis to establish a sound disease control strategy. The endemic presence of LChV-2 is mainly confirmed using laborious time-consuming reverse-transcription (RT-PCR). A rapid reverse transcription loop-mediated isothermal amplification (RT-LAMP) assay targeting a conserved region of the coat protein was developed and compared with conventional RT-PCR for the specific detection of LChV-2. This affordable assay, combined with a simple RNA extraction, deploys desirable characteristics such as higher ability for faster (<15 min), more analytically sensitive (100-fold), and robust broad-range diagnosis of LChV-2 isolates from sweet cherry, ornamental flowering cherry displaying heterogenous viral etiology and, for the first time, newly identified potential insect vectors. Moreover, use of Sanger and total RNA high-throughput sequencing as complementary metaviromics approaches confirmed the LChV-2 RT-LAMP detection of divergent LChV-2 isolates in new hosts and the relationship of their whole-genome was exhaustively inferred using maximum-likelihood phylogenomics. This entails unprecedented critical understanding of a novel evolutionary clade further expanding LChV-2 viral diversity. In conclusion, this highly effective diagnostic platform facilitates strategical support for early in-field testing to reliably prevent dissemination of new LChV-2 outbreaks from propagative plant stocks or newly postulated insect vectors. Validated results and major advantages are herein thoroughly discussed, in light of the knowledge required to increase the potential accuracy of future diagnostics and the essential epidemiological considerations to proactively safeguard cherries and Prunus horticultural crop systems from little cherry disease.

The Potential Use of Isothermal Amplification Assays for In-Field Diagnostics of Plant Pathogens

Rapid, sensitive, and timely diagnostics are essential for protecting plants from pathogens. Commonly, PCR techniques are used in laboratories for highly sensitive detection of DNA/RNA from viral, viroid, bacterial, and fungal pathogens of plants. However, using PCR-based methods for in-field diagnostics is a challenge and sometimes nearly impossible. With the advent of isothermal amplification methods, which provide amplification of nucleic acids at a certain temperature and do not require thermocyclic equipment, going beyond the laboratory has become a reality for molecular diagnostics. The amplification stage ceases to be limited by time and instruments. Challenges to solve involve finding suitable approaches for rapid and user-friendly plant preparation and detection of amplicons after amplification. Here, we summarize approaches for in-field diagnostics of phytopathogens based on different types of isothermal amplification and discuss their advantages and disadvantages. In this review, we consider a combination of isothermal amplification methods with extraction and detection methods compatible with in-field phytodiagnostics. Molecular diagnostics in out-of-lab conditions are of particular importance for protecting against viral, bacterial, and fungal phytopathogens in order to quickly prevent and control the spread of disease. We believe that the development of rapid, sensitive, and equipment-free nucleic acid detection methods is the future of phytodiagnostics, and its benefits are already visible.

"Shining a LAMP" (Loop-Mediated Isothermal Amplification) on the Molecular Detection of Phytopathogens Phytophthora spp. and Phytophthora cactorum in Strawberry Fields

Phytopathogenic microorganisms belonging to the genus Phytophthora have been recognized many times as causal agents of diseases that lower the yield of many plants important for agriculture. Meanwhile, Phytophthora cactorum causes crown rot and leather rot of berry fruits, mainly strawberries. However, widely-applied culture-based methods used for the detection of pathogens are time-consuming and often inaccurate. What is more, molecular techniques require costly equipment. Here we show a rapid and effective detection method for the aforementioned targets, deploying a simple molecular biology technique, Loop-Mediated Isothermal Amplification (LAMP). We optimized assays to amplify the translation elongation factor 1-α (EF1a) gene for two targets: Phytophthora spp. And Phytophthora cactorum. We optimized the LAMP on pure strains of the pathogens, isolated from organic plantations of strawberry, and successfully validated the assay on biological material from the environment including soil samples, rhizosphere, shoots and roots of strawberry, and with SYBR Green. Our results demonstrate that a simple and reliable molecular detection method, that requires only a thermoblock and simple DNA isolation kit, can be successfully applied to detect pathogens that are difficult to separate from the field. We anticipate our findings to be a starting point for developing easier and faster modifications of the isothermal detection methods and which can be applied directly in the plantation, in particular with the use of freeze-dried reagents and chemistry, allowing observation of the results with the naked eye.

Assessing the Use of DNA Detection Platforms Combined with Passive Wind-Powered Spore Traps for Early Surveillance of Potato and Tomato Late Blight in Canada

Quantitative PCR (qPCR), loop-mediated amplification (LAMP), and lateral flow strip-based recombinase polymerase amplification (RPA-LFS) assays were assessed for early detection of Phytophthora infestans, the global causal agent of potato and tomato late blight, on passive wind-powered spore traps known as Spornados. Spore traps were deployed in potato and tomato fields during the 2018, 2019, and 2020 growing seasons in the provinces of Alberta, British Columbia, Manitoba, Prince Edward Island, and Ontario. All assays used DNA extracts from Spornado cassette membranes targeting the P. infestans nuclear ribosomal internal transcribed spacer. A total of 1,003 Spornado samples were qPCR tested, yielding 115 positive samples for P. infestans spores. In further assessment of these samples, LAMP detected P. infestans in 108 (93.9%) of 115 qPCR positive samples, and RPA-LFS detected it in 103 (89.6%). None of the assays showed cross-reaction with other Phytophthora species or pathogenic fungi known to infect potato and tomato. The qPCR detected ≤1 fg of P. infestans DNA, and LAMP and RPA-LFS amplified 10 fg in as little as 10 min. All assays detected P. infestans before the first report of late blight symptoms in commercial potato or tomato fields within each region or province. The combination of Spornado passive samplers with qPCR, LAMP, or RPA-LFS proved a valuable spore trapping system for early surveillance of late blight in potato and tomato. Both LAMP and RPA-LFS showed potential as alternative approaches to qPCR for in-field monitoring of P. infestans.

Molecular detection of Phytophthora pluvialis, the causal agent of red needle cast in Pinus radiata

BACKGROUND

Phytophthora pluvialis was first described in 2013 and is the causal agent of red needle cast (RNC) in Pinus radiata as well as infection in Douglas fir (Pseudotsuga menziesii). A species-specific PCR is necessary for detection of this pathogen and diagnosis of RNC.

OBJECTIVE

To design and validate a species-specific molecular assay for P. pluvialis using isolates from infected pine needles.

METHODS

Species-specific PCR primers were generated from the ras-related GTP-binding protein 1 gene (ypt1) gene sequence, concentrating on DNA regions unique to P. pluvialis, and real-time and quantitative polymerase chain reaction (qPCR) were used to detect P. pluvialis from both artificially inoculated and naturally infected samples.

RESULTS

The species-specific PCR assay was generated following P. pluvialis DNA sequence analysis. In vitro tests of the specificity of the probe-based, quantitative, polymerase chain reaction (qPCR) assay showed that no amplification was observed with other Phytophthora species including other closely-related clade 3 species, or with fungal species associated with pine or with pine DNA. The limit of detection of the qPCR assay was 2 pg/μl. When the qPCR assay was used to detect P. pluvialis in artificially-inoculated and naturally infected P. radiata needles, a PCR product was detected in all inoculated samples; the mean concentration ranges of P. pluvialis DNA in the inoculated and naturally infected samples tested were 5.9-124.5 pg/μl and 8.1-340.2 pg/μl, respectively. The assays described herein were used with serological diagnostic strips, providing the ability to identify to species level.

CONCLUSIONS

The assay described herein detects P. pluvialis with high specificity and sensitivity from a range of DNA samples, including those extracted from infected plant material and serological diagnostic strips. The ability to detect and identify P. pluvialis, from infected tissues directly, provides value and practicality to diagnostics, biosecurity and research.

Development of a loop-mediated isothermal amplification (LAMP) assay for the identification of the invasive wood borer Aromia bungii (Coleoptera: Cerambycidae) from frass

The red-necked longhorn beetle Aromia bungii (Faldermann, 1835) (Coleoptera: Cerambycidae) is native to east Asia, where it is a major pest of cultivated and ornamental species of the genus Prunus. Morphological or molecular discrimination of adults or larval specimens is required to identify this invasive wood borer. However, recovering larval stages of the pest from trunks and branches causes extensive damage to plants and is timewasting. An alternative approach consists in applying non-invasive molecular diagnostic tools to biological traces (i.e., fecal pellets, frass). In this way, infestations in host plants can be detected without destructive methods. This paper presents a protocol based on both real-time and visual loop-mediated isothermal amplification (LAMP), using DNA of A. bungii extracted from fecal particles in larval frass. Laboratory validations demonstrated the robustness of the protocols adopted and their reliability was confirmed performing an inter-lab blind panel. The LAMP assay and the qPCR SYBR Green method using the F3/B3 LAMP external primers were equally sensitive, and both were more sensitive than the conventional PCR (sensitivity > 10³ to the same starting matrix). The visual LAMP protocol, due to the relatively easy performance of the method, could be a useful tool to apply in rapid monitoring of A. bungii and in the management of its outbreaks.

Rapid and Specific Detection of the Poplar Black Spot Disease Caused by Marssonina brunnea Using Loop-Mediated Isothermal Amplification Assay

Marssonina brunnea is the main pathogen that causes poplar black spot disease, which leads to the decrease of the photosynthetic efficiency and significantly affects the production and quality of timber. Currently, no in-field diagnostic exists for M. brunnea. Here, we described a loop-mediated isothermal amplification (LAMP) assay for the rapid and sensitive detection of M. brunnea. A set of six oligonucleotide primers was designed to recognize eight distinct sequences of the internal transcribed spacer (ITS) region of M. brunnea. The LAMP assay was optimized by the combination of high specificity, sensitivity, and rapidity for the detection of less than 10 pg/μL of target genomic DNA in 60 min per reaction at 65 °C, whereas with PCR, there was no amplification of DNA with concentration less than 1 ng/μL. Among the genomic DNA of 20 fungalisolates, only the samples containing the genomic DNA of M. brunnea changed from violet to sky blue (visible to the naked eye) by using hydroxynaphthol blue (HNB) dye. No DNA was amplified from the eight other fungus species, including two other Marssonina pathogens, three other foliar fungi pathogens of poplar, and three common foliar fungal endophytes of poplar. Moreover, the detection rates of M. brunnea from artificially and naturally infected poplar leaves were 10/16 (62.5%) and 6/16 (37.5%) using PCR, respectively, while the positive-sample ratios were both 16/16 (100%) using the LAMP assay. Overall, the ITS LAMP assay established here can be a better alternative to PCR-based techniques for the specific and sensitive detection of M. brunnea in poplar endemic areas with resource-limited settings.

Multiplex LAMP Detection of the Genus Phytophthora and Four Phytophthora Species P. ramorum, P. lateralis, P. kernoviae, and P. nicotianae, with a Plant Internal Control

Phytophthora species cause destructive plant diseases worldwide. All Phytophthora species, except for one, are listed as plant quarantine organisms in Japan. The exception, Phytophthora nicotianae is considered to be a domestic species. The injurious pests Phytophthora ramorum, Phytophthora lateralis, and Phytophthora kernoviae are invasive pathogens that cause tree mortality worldwide, mainly in the United States and the United Kingdom. To effectively control Phytophthora diseases, we established detection methods that utilize the loop-mediated isothermal amplification (LAMP) of the genus Phytophthora and the four species P. ramorum, P. lateralis, P. kernoviae, and P. nicotianae. LAMP primers for P. ramorum, P. lateralis, and P. kernoviae were newly designed in the present study. Our multiplex assay includes the detection of plant DNA as an internal control. When the optimum ratio between plant and pathogen primers was used in multiplex LAMP assays, 1 pg to 100 fg of pathogen DNA was detected with similar sensitivity to that in simplex LAMP assays. The detection of plant DNA in the absence of pathogens enables us to check for and avoid undesirable negative results caused by enzyme inactivation or the contamination of amplification inhibitors from plant tissues. The total time from sample collection to results is approximately 120‍ ‍min, and, thus, our multiplex LAMP assay may be used as an accurate and time-saving detection method for Phytophthora pathogens.

Molecular Identification of Anoplophora glabripennis (Coleoptera: Cerambycidae) From Frass by Loop-Mediated Isothermal Amplification

Anoplophora glabripennis (Motschulsky, 1853), native to eastern Asia, is a destructive woodborer of many ornamental species, leading to the decline and the death of the attacked trees. In outbreak areas as Europe or North America, this pest is usually identified using morphological or molecular analyses of adult or larval specimens. However, the procedures for collecting A. glabripennis specimens from infested plants are too expensive and time consuming for routine screening. A noninvasive diagnostic tool based on frass discrimination is therefore crucial for the rapid identification of A. glabripennis at different development stages in the host. This article describes a rapid diagnostic protocol based on loop-mediated isothermal amplification (LAMP). DNA extracted from A. glabripennis frass was amplified with both visual and real-time LAMP and compared with those of nontarget species. The results show that the method is reliable and accurate and therefore could be a promising diagnostic tool in phytosanitary surveys.

Development of PCR, LAMP and qPCR Assays for the Detection of Aflatoxigenic Strains of Aspergillus flavus and A. parasiticus in Hazelnut

Aspergillus flavus and A. parasiticus are two species able to produce aflatoxins in foodstuffs, and in particular in hazelnuts, at harvest and during postharvest phase. As not all the strains of these species are aflatoxin producers, it is necessary to develop techniques that can detect aflatoxigenic from not aflatoxigenic strains. Two assays, a LAMP (loop-mediated isothermal amplification) and a real time PCR with TaqMan^® probe were designed and validated in terms of specificity, sensitivity, reproducibility, and repeatability. The capability of the strains to produce aflatoxins was measured in vitro and both assays showed to be specific for the aflatoxigenic strains of A. flavus and A. parasiticus. The limit of detection of the LAMP assay was 100–999 picograms of DNA, while the qPCR detected 160 femtograms of DNA in hazelnuts. Both techniques were validated using artificially inoculated hazelnuts and naturally infected hazelnuts. The qPCR was able to detect as few as eight cells of aflatoxigenic Aspergillus in naturally infected hazelnut. The combination of the LAMP assay, which can be performed in less than an hour, as screening method, with the high sensitivity of the qPCR, as confirmation assay, is able to detect aflatoxigenic strains already in field, helping to preserve the food safety of hazelnuts.

Diversity of Phytophthora Communities across Different Types of Mediterranean Vegetation in a Nature Reserve Area

Research Highlights: Protected natural areas are a reservoir of Phytophthora species and represent the most suitable sites to study their ecology, being less disturbed by human activities than other environments. Background and Objectives: The specific objective of this study was to correlate the diversity and distribution of Phytophthora species with the vegetation in aquatic, riparian and terrestrial habitats within a protected area in Eastern Sicily, Southern Italy. Materials and Methods: Environmental samples (water and soil) were sourced from two streams running through the reserve and six different types of vegetation, including Platano-Salicetum pedicellatae, the Sarcopoterium spinosum community, Myrto communis-Pistacietum lentisci, Pistacio-Quercetum ilicis,Oleo-Quercetum virgilianae and a gallery forest dominated by Nerium oleander (Natura 2000 classification of habitats). Phytophthora species were recovered from samples using leaf baiting and were classified on the basis of morphological characteristics and sequencing of internal transcribed spacer (ITS) regions of ribosomal DNA (rDNA). Results: As many as 11 Phytophthora species, within five different ITS clades, were identified, including P. asparagi, P. bilorbang, P. cryptogea, P. gonapodyides, P. lacustris, P. multivora, P. nicotianae, P. oleae, P. parvispora, P. plurivora and P. syringae. No Phytophthora species were found in the Sarcopoterium spinosum comm. Phytophthora asparagi, P. lacustris and P. plurivora were the prevalent species in the other five plant communities, but only P. plurivora was present in all of them. Overall aquatic species from clade 6 (100 out of 228 isolates) were the most common; they were recovered from all five types of vegetation, streams and riparian habitats. Phytophthora populations found in the Platano-Salicetum pedicellatae and Oleo-Quercetum virgilianae show the highest diversity, while no correlation was found with the physicochemical characteristics of the soil. Conclusions: The vegetation type and the aquatic or terrestrial habitat were identified as major environmental factors correlated with the diversity of Phytophthora communities in this reserve.

[Detection methods for results of a loop-mediated isothermal amplification of DNA.]

The loop mediated isothermal amplification (LAMP) was developed by T. Notomi et al. in 2000. It has become one of the most promising methods for point-of-care diagnostics due to its accuracy, sensitivity and ease of execution. In this review, various methods for detecting the results of the LAMP reaction are considered; their advantages and disadvantages are revealed. Methods for detecting LAMP results can be divided into indirect and direct. Indirect methods aimed at detecting changes in the chemical composition of the reaction mixture include real-time turbidimetry, fluorescence detection with calcein, colorimetric detection with hydroxynaphthol blue, and detection using modified gold nanoparticles. Direct methods based on the detection of accumulation amplicons during the reaction include fluorimetric detection with intercalating dyes, resonance fluorescence energy transfer, enzyme immunoassay, immunochromatography, using cationic polymers and gold nanoparticles. The development in the field of point-of-care diagnostics is characterized by a pronounced tendency to miniaturization, the LAMP reaction on microchips and microfluidic devices with an electrochemical or optical detection method. The most promising for the diagnosis of infectious diseases are turbidimetry methods and the use of intercalating dyes. The development of portable domestic instruments for detecting of LAMP results based on real-time fluorescence detection or turbidimetry will contribute to the widespread introduction of the method into clinical laboratory diagnostic practice. A literature research was conducted in the Pubmed ncbi based on keywords.

Validation of a Preformulated, Field Deployable, Recombinase Polymerase Amplification Assay for Phytophthora Species

Recombinase polymerase amplification (RPA) assays are valuable molecular diagnostic tools that can detect and identify plant pathogens in the field without time-consuming DNA extractions. Historically, RPA assay reagents were commercially available as a lyophilized pellet in microfuge strip tubes, but have become available in liquid form more recently—both require the addition of primers and probes prior to use, which can be challenging to handle in a field setting. Lyophilization of primers and probes, along with RPA reagents, contained within a single tube limits the risk of contamination, eliminates the need for refrigeration, as the lyophilized reagents are stable at ambient temperatures, and simplifies field use of the assays. This study investigates the potential effect of preformulation on assay performance using a previously validated Phytophthora genus-specific RPA assay, lyophilized with primers and probes included with the RPA reagents. The preformulated lyophilized Phytophthora RPA assay was compared with a quantitative polymerase chain reaction (qPCR) assay and commercially available RPA kits using three qPCR platforms (BioRad CFX96, QuantStudio 6 and Applied Biosystems ViiA7) and one isothermal platform (Axxin T16-ISO RPA), with experiments run in four separate labs. The assay was tested for sensitivity (ranging from 500 to 0.33 pg of DNA) and specificity using purified oomycete DNA, as well as crude extracts of Phytophthora-infected and non-infected plants. The limit of detection (LOD) using purified DNA was 33 pg in the CFX96 and ViiA7 qPCR platforms using the preformulated kits, while the Axxin T16-ISO RPA chamber and the QuantStudio 6 platform could detect down to 3.3 pg with or without added plant extract. The LOD using a crude plant extract for the BioRad CFX96 was 330 pg, whereas the LOD for the ViiA7 system was 33 pg. These trials demonstrate the consistency and uniformity of pathogen detection with preformulated RPA kits for Phytophthora detection when conducted by different labs using different instruments for measuring results.

Detection of Phytophthora infestans by Loop-Mediated Isothermal Amplification, Real-Time LAMP, and Droplet Digital PCR

Phytophthora infestans is the causal agent of potato late blight, a devastating disease of tomato and potato and a threat to global food security. Early detection and intervention is essential for effective management of the pathogen. We developed a loop-mediated isothermal amplification (LAMP) assay for P. infestans and compared this assay to conventional PCR, real-time LAMP, and droplet digital PCR for detection of P. infestans. The LAMP assay was specific for P. infestans on potato and tomato and did not amplify other potato- or tomato-infecting Phytophthora species or other fungal and bacterial pathogens that infect potato and tomato. The detection threshold for SYBR Green LAMP and real-time LAMP read with hydroxynaphthol blue and EvaGreen was 1 pg/µl. In contrast, detection by conventional PCR was 10 pg/µl. Droplet digital PCR had the lowest detection threshold (100 fg/µl). We adapted the LAMP assay using SYBR Green and a mobile reader (mReader) for use in the field. Detection limits were 584 fg/µl for SYBR Green LAMP read on the mReader, which was more sensitive than visualization with the human eye. The mobile platform records geospatial coordinates and data from positive pathogen detections can be directly uploaded to a cloud database. Data can then be integrated into disease surveillance networks. This system will be useful for real-time detection of P. infestans and will improve the timeliness of reports into surveillance systems such as USABlight or EuroBlight.

Molecular Approaches for Low-Cost Point-of-Care Pathogen Detection in Agriculture and Forestry

Early detection of plant diseases is a crucial factor to prevent or limit the spread of a rising infection that could cause significant economic loss. Detection test on plant diseases in the laboratory can be laborious, time consuming, expensive, and normally requires specific technical expertise. Moreover, in the developing countries, it is often difficult to find laboratories equipped for this kind of analysis. Therefore, in the past years, a high effort has been made for the development of fast, specific, sensitive, and cost-effective tests that can be successfully used in plant pathology directly in the field by low-specialized personnel using minimal equipment. Nucleic acid-based methods have proven to be a good choice for the development of detection tools in several fields, such as human/animal health, food safety, and water analysis, and their application in plant pathogen detection is becoming more and more common. In the present review, the more recent nucleic acid-based protocols for point-of-care (POC) plant pathogen detection and identification are described and analyzed. All these methods have a high potential for early detection of destructive diseases in agriculture and forestry, they should help make molecular detection for plant pathogens accessible to anyone, anywhere, and at any time. We do not suggest that on-site methods should replace lab testing completely, which remains crucial for more complex researches, such as identification and classification of new pathogens or the study of plant defense mechanisms. Instead, POC analysis can provide a useful, fast, and efficient preliminary on-site screening that is crucial in the struggle against plant pathogens.

A Novel LAMP Assay for the Detection of Phytophthora cinnamomi Utilizing a New Target Gene Identified From Genome Sequences

Phytophthora cinnamomi is an ecologically and agriculturally significant plant pathogen. Early and accurate detection of P. cinnamomi is paramount to disease prevention and management. In this study, a loop-mediated isothermal amplification (LAMP) assay utilizing a new target gene Pcinn100006 identified from genomic sequence data was developed and evaluated for the detection of P. cinnamomi. This Pcinn100006 LAMP assay was found highly specific to P. cinnamomi. All 10 tested isolates of P. cinnamomi yielded positive results, whereas 50 isolates belonging to 16 other Phytophthora species, Globisporangium ultimum, and 14 fungal species lacked detection. This assay was 10 times more sensitive (100 pg in a 25-µl reaction mixture) than a conventional PCR assay (2 ng in a 50-µl reaction mixture) for detecting the genomic DNA of P. cinnamomi. In addition, it detected P. cinnamomi from artificially inoculated leaves of Cedrus deodara. Moreover, detection rates of P. cinnamomi using environmental DNAs extracted from 13 naturally infested rhizosphere samples were 100% in the Pcinn100006 LAMP assay versus 46% in the conventional PCR assay. Considering its higher accuracy and shorter time span, this Pcinn100006 LAMP assay is a promising diagnostic tool to replace conventional PCR-based and culture-dependent assays for screening of P. cinnamomi in regions at risk of infection or contamination.

Relative Performance of MinION (Oxford Nanopore Technologies) versus Sequel (Pacific Biosciences) Third-Generation Sequencing Instruments in Identification of Agricultural and Forest Fungal Pathogens

Culture-based molecular identification methods have revolutionized detection of pathogens, yet these methods are slow and may yield inconclusive results from environmental materials. The second-generation sequencing tools have much-improved precision and sensitivity of detection, but these analyses are costly and may take several days to months. Of the third-generation sequencing techniques, the portable MinION device (Oxford Nanopore Technologies) has received much attention because of its small size and possibility of rapid analysis at reasonable cost. Here, we compare the relative performances of two third-generation sequencing instruments, MinION and Sequel (Pacific Biosciences), in identification and diagnostics of fungal and oomycete pathogens from conifer (Pinaceae) needles and potato (Solanum tuberosum) leaves and tubers. We demonstrate that the Sequel instrument is efficient for metabarcoding of complex samples, whereas MinION is not suited for this purpose due to a high error rate and multiple biases. However, we find that MinION can be utilized for rapid and accurate identification of dominant pathogenic organisms and other associated organisms from plant tissues following both amplicon-based and PCR-free metagenomics approaches. Using the metagenomics approach with shortened DNA extraction and incubation times, we performed the entire MinION workflow, from sample preparation through DNA extraction, sequencing, bioinformatics, and interpretation, in 2.5 h. We advocate the use of MinION for rapid diagnostics of pathogens and potentially other organisms, but care needs to be taken to control or account for multiple potential technical biases.IMPORTANCE Microbial pathogens cause enormous losses to agriculture and forestry, but current combined culturing- and molecular identification-based detection methods are too slow for rapid identification and application of countermeasures. Here, we develop new and rapid protocols for Oxford Nanopore MinION-based third-generation diagnostics of plant pathogens that greatly improve the speed of diagnostics. However, due to high error rate and technical biases in MinION, the Pacific BioSciences Sequel platform is more useful for in-depth amplicon-based biodiversity monitoring (metabarcoding) from complex environmental samples.

A qPCR Assay for the Detection of Phytophthora cinnamomi Including an mRNA Protocol Designed to Establish Propagule Viability in Environmental Samples

Phytophthora cinnamomi causes root and collar rot in many plant species in natural ecosystems and horticulture. A species-specific primer and probe PCIN5 were designed based on a mitochondrial locus encoding subunit 2 of cytochrome c oxidase (cox2). Eight PCR primers, including three forward and five reverse, were designed and tested in all possible combinations. Annealing temperatures were optimized for each primer pair set to maximize both specificity and sensitivity. Each set was tested against P. cinnamomi and two closely related clade 7 species, P. parvispora and P. niederhauseri. From these tests, five primer pairs were selected based on specificity and, with a species-specific P. cinnamomi probe, used to develop quantitative real-time PCR (qPCR) assays. The specificity of the two most sensitive qPCR assays was confirmed using the genomic DNA of 29 Phytophthora isolates, including 17 isolates of 11 species from clade 7, and representative species from nine other clades (all except clade 3). The assay was able to detect as little as 150 ag of P. cinnamomi DNA and showed no cross-reaction with other Phytophthora species, except for P. parvispora, a very closely related species to P. cinnamomi, which showed late amplification at high DNA concentrations. The efficiency of the qPCR protocol was evaluated with environmental samples including roots and associated soil from plants artificially infected with P. cinnamomi. Different RNA isolation kits were tested and evaluated for their performance in the isolation of RNA from environmental samples, followed by cDNA synthesis, and qPCR assay. Finally, a protocol was recommended for determining the presence of P. cinnamomi in recalcitrant environmental samples.

Rapid Detection of Monilinia fructicola and Monilinia laxa on Peach and Nectarine using Loop-Mediated Isothermal Amplification

Monilinia laxa and M. fructicola are two causal agents of brown rot, one of the most important diseases in stone fruit. Two species cause blight on blossoms and twigs and brown rot on fruit in pre- and postharvest. Both species are distributed worldwide in North and South America, Australia, and Japan. In Europe, M. laxa is endemic, while M. fructicola was introduced in 2001 and it is now widespread in several countries. Currently, both species coexist in European stone fruit orchards. Monilinia spp. overwinter in cankers and mummified fruit. Mummy monitoring during winter permits growers to understand which species of Monilinia will be prevalent in an orchard during the following season, permitting planning of an appropriate crop protection. Traditionally, the identification has been carried out using morphological features and even with polymerase chain reaction (PCR)-based assays that requires time and well-equipped laboratories. In this study, two isothermal-based methods were designed to identify these pathogens in a faster way than using traditional methods. The loop-mediated amplification (LAMP) assays were validated on some isolates of Monilinia spp. coming from the mummy monitoring according to the international European and Mediterranean Plant Protection Organization standard (PM7/98), taking into account specificity, sensitivity, repeatability, and reproducibility. The sensitivity of both assays was checked by monitoring (at different time points) two nectarine varieties artificially inoculated and stored at two different temperatures. The reliability of both LAMP assays against the quantification of the inoculum was compared with previously published quantitative PCR assays. Both LAMP methods were able to detect a low number of cells. These LAMP methods could be a useful tool for monitoring brown rot causal agents in the field and during postharvest.

Development of Three Loop-Mediated Isothermal Amplification (LAMP) Assays for the Rapid Detection of Calonectria ilicicola, Dactylonectria macrodidyma, and the Dactylonectria Genus in Avocado Roots

Black root rot of avocado is a severe disease of nursery trees and young orchard transplants, causing tree death within a year after planting. In Australia, key pathogens include species complexes Calonectria ilicicola and Dactylonectria macrodidyma; however, several other Dactylonectria species also cause the disease. Rapid detection of these pathogens in planta is important to speed up implementation of disease management and reduce loss. The purpose of this study was to develop three loop-mediated isothermal amplification (LAMP) diagnostic assays to rapidly identify species within the C. ilicicola and D. macrodidyma complexes and species in the Dactylonectria genus in avocado roots. Primers were designed from β-tubulin sequence data of C. ilicicola and from histone H3 of D. macrodidyma and the Dactylonectria genus. The LAMP primers were tested for specificity and sensitivity with 82 fungal isolates, which included the target species complexes C. ilicicola and D. macrodidyma; species within the target Dactylonectria genus viz. D. macrodidyma, D. anthuriicola, D. novozelandica, D. pauciseptata, and D. vitis; and isolates of nontarget species, including Calonectria sp., Cylindrocladiella sp., Gliocladiopsis forsbergii, G. peggii, G. whileyi, Ilyonectria sp., Mariannaea sp., Fusarium sp., and Phytophthora cinnamomi. The species-specific LAMP assays were sensitive and specific at DNA concentrations of 1 pg/µl for C. ilicicola and 0.01 ng/µl for D. macrodidyma, whereas the Dactylonectria genus-wide assay was sensitive to 0.1 ng/µl. Detection of C. ilicicola occurred within 10 to 15 or 15 to 30 min when the template was pure DNA or crude extracts obtained from suspending fungal cultures in sterile water, respectively. Detection of D. macrodidyma was between 12 to 29 min with pure DNA and 16 to 30 min with crude extracts. Dactylonectria spp. were detected within 6 to 25 min with pure DNA and 7 to 23 min with crude extracts. The specificity of the assays was found to be dependent on time and isothermal amplification temperature, with optimal specificity occurring in reactions of <30 min and at temperatures of 67°C for C. ilicicola and D. macrodidyma assays and 69°C for Dactylonectria genus-wide assays. The assays were modified to accommodate a DNA extraction step and use of avocado roots as DNA templates. Detection in avocado roots ranged between 12 to 25 min for C. ilicicola, 12 to 26 min for D. macrodidyma, and 14 to 30 min for species in the Dactylonectria genus. The LAMP assays are applicable across multiple agricultural industries, because C. ilicicola, D. macrodidyma, and Dactylonectria spp. are also important pathogens of various crops and ornamental plants.

Molecular Detection of QoI Resistance in Colletotrichum gloeosporioides Causing Strawberry Anthracnose Based on Loop-Mediated Isothermal Amplification Assay

Anthracnose is one of the most common diseases in strawberry plants. Colletotrichum gloeosporioides is the major cause of anthracnose in China, including Zhejiang Province. Early, specific, reliable, and time-saving detection is urgently needed to prevent the further spread of C. gloeosporioides, guiding farmers to utilize chemicals to control anthracnose. In this study, we showed that the high resistance to pyraclostrobin, caused by a point mutation at codon 143 (GGT→GCT) in the cytochrome b gene of C. gloeosporioides was prevalent in the strawberry growing regions, and we developed a loop-mediated isothermal amplification (LAMP) assay as a detection method. Primer sets S0 and S4 could be used to specifically detect C. gloeosporioides isolates and the G143A mutations, respectively. A detection limit of 10^-2 ng (10 pg), which is at least 10-fold more sensitive than conventional polymerase chain reaction, was achieved by the LAMP assay. Here, we utilized lateral-flow devices (LFDs), nitrocellulose membranes that can absorb nucleic acids, to acquire the total genomic DNA of strawberry plants within 2 min. The LFD membranes were used as DNA templates for the LAMP assays to accurately detect strawberry plants infected with C. gloeosporioides. This diagnostic method for strawberry anthracnose was accomplished within 1 h, including the sample preparation and LAMP assays. Collectively, we developed a sensitive and practical method for monitoring C. gloeosporioides and its quinone outside inhibitor-resistant mutants. The LAMP assay for detection of C. gloeosporioides in strawberry plants has great potential for rapid strawberry anthracnose surveillance and will provide farmers with advice on preventing C gloeosporioides at the early stages of strawberry development.

Rapid and sensitive detection of Senecavirus A by reverse transcription loop-mediated isothermal amplification combined with a lateral flow dipstick method

Senecavirus A (SVA) is a critical pathogen causing vesicular lesions in sows and acute death of newborn piglets, resulting in very large economic losses in the pig industry. To restrict the transmission of SVA, an establishment of an effective diagnostic method is crucial for the prevention and control of the disease. However, traditional detection methods often have many drawbacks. In this study, reverse transcription loop-mediated isothermal amplification (RT-LAMP) was combined with a lateral flow dipstick (LFD) to detect SVA. The resulting RT-LAMP-LFD assay was performed at 60°C for 50 min and then directly judged on an LFD visualization strip. This method shows high specificity and sensitivity to SVA. The detection limit of RT-LAMP was 4.56x10^-8 ng/μL RNA, approximately 11 copies/μL RNA, and it was 10 times more sensitive than RT-PCR. This detection method’s positive rate for clinical samples is comparable to that of RT-PCR. This method is time saving and highly efficient and is thus expected to be used to diagnose SVA infections in this field.

Comparative Evaluation of LAMP, qPCR, Conventional PCR, and ELISA to Detect Ralstonia solanacearum in Kenyan Potato Fields

Bacterial wilt caused by Ralstonia solanacearum is considered among the most damaging diseases of potato in Sub-Saharan Africa and the most significant biotic constraint of potato production alongside late blight. Unlike late blight, which can be managed by chemical means, R. solanacearum can only be managed through cultural methods and clean seed. Laboratory testing to certify seed before planting is required to confirm the absence of the pathogen in Kenya. A loop-mediated isothermal amplification (LAMP) assay was developed using the UDP-(3-O-acyl)-N-acetylglucosamine deacetylase gene (IpxC) to screen seed potato for R. solanacearum strains. The assay was assessed using DNA extracted from R. solanacearum and other soil and potato pathogens to demonstrate specificity and sensitivity. The LAMP assay was validated using field samples from different potato growing regions of Kenya collected over two growing seasons and compared with established nucleic acid and protein-based assays. The IpxC LAMP assay was found to be specific and sensitive to R. solanacearum, detecting as low as 2.5 pg/µl of R. solanacearum DNA. Of the 47 potentially infected field samples collected, both IpxC LAMP and quantitative polymerase chain reaction (PCR) detected R. solanacearum DNA in 90% of the samples, followed by conventional PCR (86%) and ELISA (75%). This IpxC LAMP assay is a promising diagnostic tool to rapidly screen for R. solanacearum in seed potato with high sensitivity in Kenya. Copyright © 2019 The Author(s). This is an open access article distributed under the CC BY 4.0 International license .

Real-time loop-mediated isothermal amplification: an early-warning tool for quarantine plant pathogen detection

An effective framework for early warning and rapid response is a crucial element to prevent or mitigate the impact of biological invasions of plant pathogens, especially at ports of entry. Molecular detection of pathogens by using PCR-based methods usually requires a well-equipped laboratory. Rapid detection tools that can be applied as point-of-care diagnostics are highly desirable, especially to intercept quarantine plant pathogens such as Xylella fastidiosa, Ceratocystis platani and Phytophthora ramorum, three of the most devastating pathogens of trees and ornamental plants in Europe and North America. To this aim, in this study we developed three different loop mediated isothermal amplification (LAMP) assays able to detect each target pathogen both in DNA extracted from axenic culture and in infected plant tissues. By using the portable instrument Genie^® II, the LAMP assay was able to recognize X. fastidiosa, C. platani and P. ramorum DNA within 30 min of isothermal amplification reaction, with high levels of specificity and sensitivity (up to 0.02 pg µL⁻¹ of DNA). These new LAMP-based tools, allowing an on-site rapid detection of pathogens, are especially suited for being used at ports of entry, but they can be also profitably used to monitor and prevent the possible spread of invasive pathogens in natural ecosystems.

In Situ Plant Virus Nucleic Acid Isothermal Amplification Detection on Gold Nanoparticle-Modified Electrodes

Solid-phase isothermal recombinase polymerase amplification (RPA) offers many benefits over the standard RPA in homogeneous phase in terms of sensitivity, portability, and versatility. However, RPA devices reported to date are limited by the need for heating sources to reach sensitive detection. With the aim of overcoming such limitation, we propose here a label-free highly integrated in situ RPA amplification/detection approach at room temperature that takes advantage of the high sensitivity offered by gold nanoparticle (AuNP)-modified sensing substrates and electrochemical impedance spectroscopic (EIS) detection. Plant disease ( Citrus tristeza virus (CTV)) diagnostics was selected as a relevant target for demonstration of the proof-of-concept. RPA assay for amplification of the P20 gene (387-bp) characteristic of CTV was first designed/optimized and tested by standard gel electrophoresis analysis. The optimized RPA conditions were then transferred to the AuNP-modified electrode surface, previously modified with a thiolated forward primer. The in situ-amplified CTV target was investigated by EIS in a Fe(CN₆)^4-/Fe(CN₆)^3- red-ox system, being able to quantitatively detect 1000 fg μL^-1 of nucleic acid. High selectivity against nonspecific gene sequences characteristic of potential interfering species such as Citrus psorosis virus (CPsV) and Citrus caxicia viroid (CCaV) was demonstrated. Good reproducibility (RSD of 8%) and long-term stability (up to 3 weeks) of the system were also obtained. Overall, with regard to sensitivity, cost, and portability, our approach exhibits better performance than RPA in homogeneous phase, also without the need of heating sources required in other solid-phase approaches.

LAMP detection of the genetic element 'Mona' associated with DMI resistance in Monilinia fructicola

BACKGROUND

The increasing use of demethylation inhibitor (DMI) fungicides for the control of peach brown rot has resulted in resistance in Monilinia fructicola. Resistance in the southeastern USA is caused by overexpression of the MfCYP51 gene due to the presence of a 65-bp inserted element 'Mona' located in the upstream regulatory region of MfCYP51. A rapid diagnostic assay would be useful to detect the presence and monitor further spread of this resistance mechanism.

RESULTS

A loop-mediated isothermal amplification (LAMP) method was developed for rapid detection of 'Mona'-based DMI resistance. The assay was optimized for specificity and sensitivity, and was shown to detect the presence of 10 fg of purified target DNA per reaction within 85 min. Only DNA isolated from DMI-resistant isolates containing 'Mona' resulted in a fluorescent signal after LAMP assay amplification. DNA from sensitive isolates from China and the USA and six other common fungal species of peach did not yield a signal. The method also positively identified 'Mona' from crude DNA extracts (using Lyse and Go reagents heated to 100 °C for 10 min) obtained from the mycelium and conidia of symptomatic fruit.

CONCLUSION

Considering its specificity, stability and repeatability, the LAMP assay could be a valuable tool for rapid on-site diagnosis of M. fructicola isolates resistant to DMI fungicides in the southeastern USA. © 2018 Society of Chemical Industry.

Rapid Sample Preparation and LAMP for Phytoplasma Detection

Loop-mediated isothermal AMPlification (LAMP) allows the rapid detection of pathogens by polymerase-mediated amplification of target nucleic acid sequences at a single incubation temperature. LAMP can be combined with very simple sample preparation/crude DNA extraction protocols, allowing the method to be used away from the laboratory for in-field detection. Equally, these benefits can also be leveraged to provide a rapid method suited to high-throughput diagnostic laboratories. In this chapter we described a crude DNA extraction protocol suitable for use in the field and provide a protocol for real-time detection using LAMP.

New sensitive and fast detection of Little cherry virus 1 using loop-mediated isothermal amplification (RT-LAMP)

Little cherry virus 1 (LChV-1) belongs to the genus Velarivirus, family Closteroviridae, is an economically important pathogen affecting mainly cherry around the world emphasizing the impetus for its efficient and accurate on-site detection. This study describes the development of a reliable diagnostic protocol of LChV-1 based on a one-step reverse-transcription loop-mediated isothermal amplification (RT-LAMP). The protocol detects LChV-1 isolates in less than 10 min by fluorescence monitoring using a mobile detection device and is most optimal when performed at 67 °C. Sharp melting curves and unique melting temperatures (Tm) were obtained for the positive samples. Both the RT-LAMP and classical RT-PCR methods are capable of specifically detecting LChV-1 in infected leaf tissues. In addition, the RT-LAMP has remarkable advantages in comparison to RT-PCR. It is at least hundred fold more sensitive, significantly faster (allowing on-field leaf-to-result diagnostic) and efficient at minimal cost. In conclusion, this innovative RT-LAMP approach can contribute to the implementation of sustainable integrated management strategies for detection of LChV-1 in commercial orchards or for horticultural research stations. It is also suitable for decision support in phytosanitary epidemiological programs.

Development of Loop-Mediated Isothermal Amplification Assays for the Detection of Seedborne Fungal Pathogens Fusarium fujikuroi and Magnaporthe oryzae in Rice Seed

Bakanae disease (caused by Fusarium fujikuroi) and rice blast (caused by Magnaporthe oryzae) are two of the most important seedborne pathogens of rice. The detection of both pathogens in rice seed is necessary to maintain high quality standards and avoid production losses. Currently, blotter tests are used followed by morphological identification of the developing pathogens to provide an incidence of infection in seed lots. Two loop-mediated isothermal amplification assays were developed with primers designed to target the elongation factor 1-α sequence of F. fujikuroi and the calmodulin sequence of M. oryzae. The specificity, sensitivity, selectivity, repeatability, and reproducibility for each assay was assessed in line with the international validation standard published by the European and Mediterranean Plant Protection Organization (PM7/98). The results showed a limit of detection of 100 to 999 fg of DNA of F. fujikuroi and 10 to 99 pg of M. oryzae DNA. When combined with a commercial DNA extraction kit, the assays were demonstrated to be effective for use in detection of the pathogens in commercial batches of infected rice seed of different cultivars, giving results equivalent to the blotter method, thus demonstrating the reliability of the method for the surveillance of F. fujikuroi and M. oryzae in seed-testing laboratories.

Nucleic acids-based tools for ballast water surveillance, monitoring, and research

Understanding the risks of biological invasion posed by ballast water-whether in the context of compliance testing, routine monitoring, or basic research-is fundamentally an exercise in biodiversity assessment, and as such should take advantage of the best tools available for tackling that problem. The past several decades have seen growing application of genetic methods for the study of biodiversity, driven in large part by dramatic technological advances in nucleic acids analysis. Monitoring approaches based on such methods have the potential to increase dramatically sampling throughput for biodiversity assessments, and to improve on the sensitivity, specificity, and taxonomic accuracy of traditional approaches. The application of targeted detection tools (largely focused on PCR but increasingly incorporating novel probe-based methodologies) has led to a paradigm shift in rare species monitoring, and such tools have already been applied for early detection in the context of ballast water surveillance. Rapid improvements in community profiling approaches based on high throughput sequencing (HTS) could similarly impact broader efforts to catalogue biodiversity present in ballast tanks, and could provide novel opportunities to better understand the risks of biotic exchange posed by ballast water transport-and the effectiveness of attempts to mitigate those risks. These various approaches still face considerable challenges to effective implementation, depending on particular management or research needs. Compliance testing, for instance, remains dependent on accurate quantification of viable target organisms; while tools based on RNA detection show promise in this context, the demands of such testing require considerable additional investment in methods development. In general surveillance and research contexts, both targeted and community-based approaches are still limited by various factors: quantification remains a challenge (especially for taxa in larger size classes), gaps in nucleic acids reference databases are still considerable, uncertainties in taxonomic assignment methods persist, and many applications have not yet matured sufficiently to offer standardized methods capable of meeting rigorous quality assurance standards. Nevertheless, the potential value of these tools, their growing utilization in biodiversity monitoring, and the rapid methodological advances over the past decade all suggest that they should be seriously considered for inclusion in the ballast water surveillance toolkit.

Development of a lateral flow recombinase polymerase assay for the diagnosis of Schistosoma mansoni infections

Infection with Schistosoma mansoni causes intestinal schistosomiasis, a major health problem across Africa. The accurate diagnosis of intestinal schistosomiasis is vital to inform surveillance/control programs. Diagnosis mainly relies on microscopic detection of eggs in faecal samples but many factors affect sensitivity. Molecular diagnostics are sensitive and specific but application is limited as necessary infrastructure, financial resources and skilled personnel are often lacking in endemic settings. Recombinase Polymerase Amplification (RPA) is an isothermal DNA amplification/detection technology that is practical in nearly any setting. Here we developed a RPA lateral flow (LF) assay targeting the 28S rDNA region of S. mansoni. The 28S LF-RPA assay's lower limit of detection was 10pg DNA with the lower test parameters permitting sufficient amplification being 6 min and 25°C. Optimal assay parameters were 40-45°C and 10 min with an analytical sensitivity of 10² copies of DNA. Additionally the PCRD3 lateral flow detection cassettes proved more robust and sensitive compared to the Milenia HybriDetect strips. This 28S LF-RPA assay produces quick reproducible results that are easy to interpret, require little infrastructure and is a promising PON test for the field molecular diagnosis of intestinal schistosomiasis.

Advances in Diagnostics of Downy Mildews: Lessons Learned from Other Oomycetes and Future Challenges

Downy mildews are plant pathogens that damage crop quality and yield worldwide. Among the most severe and notorious crop epidemics of downy mildew occurred on grapes in the mid-1880s, which almost destroyed the wine industry in France. Since then, there have been multiple outbreaks on sorghum and millet in Africa, tobacco in Europe, and recent widespread epidemics on lettuce, basil, cucurbits, and spinach throughout North America. In the mid-1970s, loss of corn to downy mildew in the Philippines was estimated at US$23 million. Today, crops that are susceptible to downy mildews are worth at least $7.5 billion of the United States' economy. Although downy mildews cause devastating economic losses in the United States and globally, this pathogen group remains understudied because they are difficult to culture and accurately identify. Early detection of downy mildews in the environment is critical to establish pathogen presence and identity, determine fungicide resistance, and understand how pathogen populations disperse. Knowing when and where pathogens emerge is also important for identifying critical control points to restrict movement and to contain populations. Reducing the spread of pathogens also decreases the likelihood of sexual recombination events and discourages the emergence of novel virulent strains. A major challenge in detecting downy mildews is that they are obligate pathogens and thus cannot be cultured in artificial media to identify and maintain specimens. However, advances in molecular detection techniques hold promise for rapid and in some cases, relatively inexpensive diagnosis. In this article, we discuss recent advances in diagnostic tools that can be used to detect downy mildews. First, we briefly describe downy mildew taxonomy and genetic loci used for detection. Next, we review issues encountered when identifying loci and compare various traditional and novel platforms for diagnostics. We discuss diagnosis of downy mildew traits and issues to consider when detecting this group of organisms in different environments. We conclude with challenges and future directions for successful downy mildew detection.

Advanced DNA-Based Point-of-Care Diagnostic Methods for Plant Diseases Detection

Diagnostic technologies for the detection of plant pathogens with point-of-care capability and high multiplexing ability are an essential tool in the fight to reduce the large agricultural production losses caused by plant diseases. The main desirable characteristics for such diagnostic assays are high specificity, sensitivity, reproducibility, quickness, cost efficiency and high-throughput multiplex detection capability. This article describes and discusses various DNA-based point-of care diagnostic methods for applications in plant disease detection. Polymerase chain reaction (PCR) is the most common DNA amplification technology used for detecting various plant and animal pathogens. However, subsequent to PCR based assays, several types of nucleic acid amplification technologies have been developed to achieve higher sensitivity, rapid detection as well as suitable for field applications such as loop-mediated isothermal amplification, helicase-dependent amplification, rolling circle amplification, recombinase polymerase amplification, and molecular inversion probe. The principle behind these technologies has been thoroughly discussed in several review papers; herein we emphasize the application of these technologies to detect plant pathogens by outlining the advantages and disadvantages of each technology in detail.

Development of Real-Time Isothermal Amplification Assays for On-Site Detection of Phytophthora infestans in Potato Leaves

Real-time loop-mediated isothermal amplification (LAMP) and recombinase polymerase amplification (RPA) assays were developed targeting the internal transcribed spacer 2 region of the ribosomal DNA of Phytophthora infestans, the potato late blight causal agent. A rapid crude plant extract (CPE) preparation method from infected potato leaves was developed for on-site testing. The assay's specificity was tested using several species of Phytophthora and other potato fungal and oomycete pathogens. Both LAMP and RPA assays showed specificity to P. infestans but also to the closely related species P. andina, P. mirabilis, P. phaseoli, and P. ipomoeae, although the latter are not reported as potato pathogen species. No cross-reaction occurred with P. capsici or with the potato pathogens tested, including P. nicotianae and P. erythroseptica. The sensitivity was determined using P. infestans pure genomic DNA added into healthy CPE samples. Both LAMP and RPA assays detected DNA at 50 fg/μl and were insensitive to CPE inhibition. The isothermal assays were tested with artificially inoculated and naturally infected potato plants using a Smart-DART platform. The LAMP assay effectively detected P. infestans in symptomless potato leaves as soon as 24 h postinoculation. A rapid and accurate on-site detection of P. infestans in plant material using the LAMP assay will contribute to improved late blight diagnosis and early detection of infections and facilitate prompt management decisions.

Rapid and sensitive diagnoses of dry root rot pathogen of chickpea (Rhizoctonia bataticola (Taub.) Butler) using loop-mediated isothermal amplification assay

Dry root rot (DRR) caused by the fungus Rhizoctonia bataticola (Taub.) Butler, is an emerging disease in chickpea. The disease is often mistaken with other root rots like Fusarium wilt, collar rot and black root rot in chickpea. Therefore, its timely and specific detection is important. Current detection protocols are either based on mycological methods or on protocols involving DNA amplification by polymerase chain reaction (PCR). Here we report the rapid and specific detection of R. bataticola using loop-mediated isothermal amplification (LAMP) assay targeting fungal specific 5.8S rDNA sequence for visual detection of R. bataticola. The reaction was optimized at 63 °C for 75 min using minimum 10 fg of DNA. After adding SYBR Green I in LAMP products, the amplification was found to be highly specific in all the 94 isolates of R. bataticola collected from diverse geographical regions as well as DRR infected plants and sick soil. No reaction was found in other pathogenic fungi infecting chickpea (Fusarium oxysporum f. sp. ciceris, Rhizoctonia solani, Sclerotium rolfsii and Fusarium solani) and pigeonpea (Fusarium udum and Phytophthora cajani). The standardised LAMP assay with its simplicity, rapidity and specificity is very useful for the visual detection of this emerging disease in chickpea.

Ultrasensitive, rapid and inexpensive detection of DNA using paper based lateral flow assay

Sensitive, specific, rapid, inexpensive and easy-to-use nucleic acid tests for use at the point-of-need are critical for the emerging field of personalised medicine for which companion diagnostics are essential, as well as for application in low resource settings. Here we report on the development of a point-of-care nucleic acid lateral flow test for the direct detection of isothermally amplified DNA. The recombinase polymerase amplification method is modified slightly to use tailed primers, resulting in an amplicon with a duplex flanked by two single stranded DNA tails. This tailed amplicon facilitates detection via hybridisation to a surface immobilised oligonucleotide capture probe and a gold nanoparticle labelled reporter probe. A detection limit of 1 × 10^-11 M (190 amol), equivalent to 8.67 × 10⁵ copies of DNA was achieved, with the entire assay, both amplification and detection, being completed in less than 15 minutes at a constant temperature of 37 °C. The use of the tailed primers obviates the need for hapten labelling and consequent use of capture and reporter antibodies, whilst also avoiding the need for any post-amplification processing for the generation of single stranded DNA, thus presenting an assay that can facilely find application at the point of need.