Dual functional selenium-substituted hydroxyapatite

Enhancing osteoblast proliferation and bone regeneration by poly (amino acid)/selenium-doped hydroxyapatite

Among various biomaterials employed for bone repair, composites with good biocompatibility and osteogenic ability had received increasing attention from biomedical applications. In this study, we doped selenium (Se) into hydroxyapatite (Se-HA) by the precipitation method, and prepared different amounts of Se-HA-loaded poly (amino acid)/Se-HA (PAA/Se-HA) composites (0, 10 wt%, 20 wt%, 30 wt%) byin-situmelting polycondensation. The physical and chemical properties of PAA/Se-HA composites were characterized by x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and their mechanical properties. XRD and FT-IR results showed that PAA/Se-HA composites contained characteristic peaks of PAA and Se-HA with amide linkage and HA structures. DSC and TGA results specified the PAA/Se-HA30 composite crystallization, melting, and maximum weight loss temperatures at 203.33 °C, 162.54 °C, and 468.92 °C, respectively, which implied good thermal stability. SEM results showed that Se-HA was uniformly dispersed in PAA. The mechanical properties of PAA/Se-HA30 composites included bending, compressive, and yield strengths at 83.07 ± 0.57, 106.56 ± 0.46, and 99.17 ± 1.11 MPa, respectively. The cellular responses of PAA/Se-HA compositesin vitrowere studied using bone marrow mesenchymal stem cells (BMSCs) by cell counting kit-8 assay, and results showed that PAA/Se-HA30 composites significantly promoted the proliferation of BMSCs at the concentration of 2 mg ml-1. The alkaline phosphatase activity (ALP) and alizarin red staining results showed that the introduction of Se-HA into PAA enhanced ALP activity and formation of calcium nodule. Western blotting and Real-time polymerase chain reaction results showed that the introduction of Se-HA into PAA could promoted the expression of osteogenic-related proteins and mRNA (integrin-binding sialoprotein, osteopontin, runt-related transcription factor 2 and Osterix) in BMSCs. A muscle defect at the back and a bone defect at the femoral condyle of New Zealand white rabbits were introduced for evaluating the enhancement of bone regeneration of PAA and PAA/Se-HA30 composites. The implantation of muscle tissue revealed good biocompatibility of PAA and PAA/Se-HA30 composites. The implantation of bone defect showed that PAA/Se-HA30 composites enhanced bone formation at the defect site (8 weeks), exhibiting good bone conductivity. Therefore, the PAA-based composite was a promising candidate material for bone tissue regeneration.

Applications of peptide-functionalized or unfunctionalized selenium nanoparticles for the passivation of SARS-CoV-2 variants and the respiratory syncytial virus (RSV)

The SARS-CoV-2 Omicron subvariants BA.4, BA. 5 and XBB are currently causing a COVID resurgence due to their increased spreading and infectivity. These latest subvariants have been shown to be somewhat resistant to the most common vaccines even with the third dose. Moreover, it has been well documented that when patients stop taking some commercial therapies (such as Paxlovid), COVID from these variants may return and may even be more contagious. Herein, we tested unfunctionalized and functionalized selenium (Se) nanoparticles with three novel peptides (NapFFTLUFLTUTEKKKK, NapFFMLUFLMUMEKKKK, and NapFFSAVLQSGFKKKK) previously shown by themselves to passivate the Omicron SARS-CoV-2 BA.4, BA.5 and XBB variants. Se is a natural element in our diet and is well known to boost the immune system, thus, providing a complementary approach to viral infections. NapFFMLUFLMUMEKKKK showed a stronger inhibition ability at 98 % for Omicron BA.4 % and 96 % for Omicron BA.5 after just 15 min in vitro. Two types of Se nanoparticles (those made chemically or biogenically by cells) were tested to passivate the new SARS-CoV-2 XBB variant. Results showed that the combination of any peptide and using either type of Se NP, the Omicron subvariant XBB was inhibited by 100 % after just 15 min in vitro. Interestingly, the use of Se NPs alone outperformed the peptides in terms of XBB passivation. Also, in order to determine a mechanism of action, functionalizing Se nanoparticles with the NapFFSAVLQSGFKKKK peptide showed a high binding ability toward the chemotrypsin-like cysteine protease (SARS CoV-2 3CLpro). Further, as a demonstration of their versatility, these functionalized peptides also passivated the Respiratory Syncytial Virus (RSV). NapFFTLUFLTUTEKKKK and NapFFMLUFLMUMEKKKK showed in silico interactions with the fusion glycoprotein of RSV prompting in vitro RSV pseudo virus testing. Compared to the conventionally precipitated synthetic Se nanoparticles, in vitro results showed that biogenic Se functionalized with the peptides enhanced the inhibition RSV to 100 % after just 15 min of incubation. NapFFTLUFLTUTEKKKK and NapFFMLUFLMUMEKKKK also showed no potential genotoxicity or carcinogenic effects. The peptides showed good gastro-intestinal (GI) tract absorption and bioavailability as predicted using the partition coefficient (QP logPo/w), and high-water solubility as detected by QPlogS. According to these promising results, functionalizing biogenic Se nanoparticles with these novel peptides should be further studied in vivo for the improved diagnosis, prevention, and treatment of SARS-CoV-2, RSV, and other respiratory virus infections.

Calcium silicate biocomposites: effects of selenium oxide on the physico-mechanical features and theirin-vitrobiological assessments

Bone tissue regenerative material serves as a prospective recovery candidate with self-adaptable biological properties of bio-activation, degradability, compatibility, and antimicrobial efficacy instead of metallic implants. Such materials are highly expensive due to chemical reagents and complex synthesis procedures, making them unaffordable for patients with financial constraints. This research produced an efficient bone tissue regenerative material using inexpensive naturally occurring source materials, including silica sand and limestone. The extracted SiO2and CaO particles (75:25 wt%) were subjected to hydrothermal synthesis (water treatment instead of chemical solvents) to produce the CaSiO3biomaterial (code: S). Selenium oxide was doped with calcium silicate at 3, 5, and 10 wt.% to enhance its properties, yielding biocomposite materials (i.e. S3, S5, and S10). The physico-mechanical properties of these materials were investigated with x-ray diffraction, Fourier transform infrared, FESEM-EDS, and micro-universal testing machine. The results revealed that the synthesized biocomposites have a crystalline wollastonite phase with a porously fused rough surface. From structural parametric calculations, we found that the biocomposites have reduced particle size and enhanced surface area due to the influence of selenium oxide. The biocomposite S10, having high SeO2content, attained the maximum compressive strength of 75.2 MPa.In-vitrostudies of bioactivity, biodegradability, biocompatibility, and antibacterial activity were performed. At 7 and 14 d of bioactivity, the synthesized biocomposites are capable of dissolving their ions into simulated body fluid (SBF) solution to precipitate hydroxyapatite and a required Ca/P ratio of 1.69 was achieved by S3. A comparative analysis has been performed on the degradation activity in Tris-HCl and the consequent pH changes during SBF treatment. The bio-analysis revealed that the biocomposite S3 shows enhanced bioactivity through a controlled degradation rate and secured cell viability of 88% at a concentration of 100 μg ml-1. It also offers significant bacterial inhibition potency againstE.coliandS.aureusbacteria.

Nanoparticulate cell-free DNA scavenger for treating inflammatory bone loss in periodontitis

Periodontitis is a common type of inflammatory bone loss and a risk factor for systemic diseases. The pathogenesis of periodontitis involves inflammatory dysregulation, which represents a target for new therapeutic strategies to treat periodontitis. After establishing the correlation of cell-free DNA (cfDNA) level with periodontitis in patient samples, we test the hypothesis that the cfDNA-scavenging approach will benefit periodontitis treatment. We create a nanoparticulate cfDNA scavenger specific for periodontitis by coating selenium-doped hydroxyapatite nanoparticles (SeHANs) with cationic polyamidoamine dendrimers (PAMAM-G3), namely G3@SeHANs, and compare the activities of G3@SeHANs with those of soluble PAMAM-G3 polymer. Both G3@SeHANs and PAMAM-G3 inhibit periodontitis-related proinflammation in vitro by scavenging cfDNA and alleviate inflammatory bone loss in a mouse model of ligature-induced periodontitis. G3@SeHANs also regulate the mononuclear phagocyte system in a periodontitis environment, promoting the M2 over the M1 macrophage phenotype. G3@SeHANs show greater therapeutic effects than PAMAM-G3 in reducing proinflammation and alveolar bone loss in vivo. Our findings demonstrate the importance of cfDNA in periodontitis and the potential for using hydroxyapatite-based nanoparticulate cfDNA scavengers to ameliorate periodontitis.

Periodontitis is a common type of inflammatory bone loss, and cell-free DNA (cfDNA) can be a major source that enhances the periodontal tissue destruction. Here, the authors show that a cfDNA-scavenging approach is able to ameliorate periodontitis by using nanoparticulate cfDNA scavenger.

Reactive sulfur and selenium species in the regulation of bone homeostasis

Reactive oxygen species (ROS) are important modulators of physiological signaling and play important roles in bone tissue regulation. Both reactive sulfur species (RSS) and reactive selenium species (RSeS) are involved in ROS signaling, and recent work suggests RSS and RSeS involvement in the regulation of bone homeostasis. For example, RSS can promote osteogenic differentiation and decrease osteoclast activity and differentiation, and the antioxidant activity of RSeS play crucial roles in balancing bone remodeling. Here, we outline current research progress on the application of RSS and RSeS in bone disease and regeneration. Focusing on these investigations, we highlight different methods, tools, and sources of RSS and RSeS, and we also highlight future opportunities for delivery of RSS and RSeS in biological environments relating to bone.

Hydroxyapatite Nanoparticles for Improved Cancer Theranostics

Beyond their well-known applications in bone tissue engineering, hydroxyapatite nanoparticles (HAp NPs) have also been showing great promise for improved cancer therapy. The chemical structure of HAp NPs offers excellent possibilities for loading and delivering a broad range of anticancer drugs in a sustained, prolonged, and targeted manner and thus eliciting lower complications than conventional chemotherapeutic strategies. The incorporation of specific therapeutic elements into the basic composition of HAp NPs is another approach, alone or synergistically with drug release, to provide advanced anticancer effects such as the capability to inhibit the growth and metastasis of cancer cells through activating specific cell signaling pathways. HAp NPs can be easily converted to smart anticancer agents by applying different surface modification treatments to facilitate the targeting and killing of cancer cells without significant adverse effects on normal healthy cells. The applications in cancer diagnosis for magnetic and nuclear in vivo imaging are also promising as the detection of solid tumor cells is now achievable by utilizing superparamagnetic HAp NPs. The ongoing research emphasizes the use of HAp NPs in fabricating three-dimensional scaffolds for the treatment of cancerous tissues or organs, promoting the regeneration of healthy tissue after cancer detection and removal. This review provides a summary of HAp NP applications in cancer theranostics, highlighting the current limitations and the challenges ahead for this field to open new avenues for research.

Functional role of inorganic trace elements in dentin apatite tissue-part III: Se, F, Ag, and B

Dentin hydroxyapatite possesses a unique versatile structure which allows it to undergo ionic substitutions. Trace elements play pivotal roles within the oral cavity, especially in dentin apatite tissue. Therefore, it is critical to explore the role of these elements in dentin apatite structure. The roles of other inorganic elements in dentin apatite were discussed in part I (Mg, Sr, Zn, and Fe) and part II (Cu, Mn, Si, and Li) of these series. In the last part of the review series, the role of selenium, fluorine, silver, and boron in the regulation of dentin apatite structure and function was discussed. We evaluated how these elements affect the overall size, morphology, and crystallinity of dentin apatite crystals. Moreover, we investigated the importance of these elements in regulating the solubility of dentin apatite. An electronic search was performed on the role of these trace elements in dentin apatite from January 2010 to January 2022. The concentration of selenium in teeth has been explored only recently, particularly its incorporation into dentin apatite. Silver nanomaterials inhibit the growth of cariogenic microorganisms as well as arrest the degradation of collagen. Fluorine was found to have important roles in dentin remineralization and dentinal tubule occlusion, making it widely used for hydroxyapatite doping. Boron is critical for mineralized tissues like bone, dentin, and enamel, but its exact role in dentin apatite is unknown. Therefore, understanding the impact of these elements on dentin apatite is potentially transformative, as it may help to fill a significant knowledge gap in teeth mechanics.

Application of Selenium Nanoparticles in Localized Drug Targeting for Cancer Therapy

BACKGROUND

Selenium nanoparticles (SeNPs) have gardened their place in the biomedical field and serve as a chemotherapeutic agent for targeted drug delivery due to their capacity to exert distinct mechanisms of action on cancer and normal cells. The principle behind these mechanisms is the generation of Reactive Oxygen Species (ROS) eventually leads to apoptosis via the dysfunction of various pathways. SeNPs, when used in higher concentrations, lead to toxicity; therefore, conjugation and surface functionalization not only improve their toxic nature but also enhance their anticancer activity.

OBJECTIVES

The primary goal of this analysis is to provide a thorough and systematic investigation into the use of various SeNPs in localized drug targeting for cancer therapy. This has been achieved by citing examples of numerous SeNPs and their use as a drug targeting agent for cancer therapy.

METHODS

All relevant data and information about the various SeNPs for drug targeting in cancer therapy were gathered from various databases, including Science Direct, PubMed, Taylor and Francis imprints, American Chemical Society, Springer, Royal Society of Chemistry, and Google scholar.

RESULTS

SeNPs are explored due to their better biopharmaceutical properties and their cytostatic behavior. Se, as an essential component of the enzyme glutathione peroxidase (GPx) and other seleno-chemical substances, might boost chemotherapeutic efficacy, and protect tissues from cellular damage caused by ROS. SeNPs have the potential to set the stage for developing new strategies to treat malignancy.

CONCLUSION

This review extensively analyzed the anticancer efficacy and functionalization strategies of SeNPs in drug delivery to cancer cells. In addition, this review highlights the mechanism of action of drug-loaded SeNPs to suppress the proliferation of cancer cells in different cell lines.

Calcium phosphate and silicate-based nanoparticles: history and emerging trends

Bulk calcium phosphates and silicate-based bioglasses have been extensively studied since the early 1970s due to their unique capacity to bind to host bone, which led to their clinical translation and commercialization in the 1980s. Since the mid-1990s, researchers have synthesized nanoscale calcium phosphate and silicate-based particles of increased specific surface area, chemical reactivity and solubility which offer specific advantages as compared to their bulk counterparts. This review provides a critical perspective on the history and emerging trends of these two classes of ceramic nanoparticles. Their synthesis and functional properties in terms of particle composition, size, shape, charge, dispersion, and toxicity are discussed as a function of relevant processing parameters. Specifically, emerging trends such as the influence of ion doping and mesoporosity on the biological and pharmaceutical performance of these nanoparticles are reviewed in more detail. Finally, a broad comparative overview is provided on the physicochemical properties and applicability of calcium phosphate and silicate-based nanoparticles within the fields of i) local delivery of therapeutic agents, ii) functionalization of biomaterial scaffolds or implant coatings, and iii) bio-imaging applications.

Complete chemical and structural characterization of selenium-incorporated hydroxyapatite

Hydroxyapatite (HAp) has long been used as synthetic bone tissue replacement material. Recent advances in this area have led to development of dual-functional bioceramics exhibiting high biocompability/osteoconductivity together with the therapeutic effect. Selenium, in that respect, is an effective therapeutic agent with promising antioxidant activity and anticancer effects. In this study, selenium-incorporated hydroxyapatite (HAp:Se) particles have been synthesized by modified aqueous precipitation method using calcium (Ca(NO₃)₂·4H₂O) and phosphate ((NH₄)₂HPO₄) salts and sodium selenite (Na₂SeO₃). The effects of selenium incorporation and post-synthesis calcination treatment (900-1100 °C) on physical, chemical properties and crystal structure of resultant HAp powders have been investigated. Complete chemical identification was performed with spectroscopical analyses including Fourier transform infrared and x-ray photoelectron spectroscopy to elucidate the mechanism and chemical nature of selenium incorporation in HAp. Meanwhile, detailed x-ray diffraction studies by Rietveld refinement have conducted to explain changes in the HAp crystal structure upon selenium incorporation.

Hydroxyapatite nanophases augmented with selenium and manganese ions for bone regeneration: Physiochemical, microstructural and biological characterization

Hydroxyapatite (HAP) nanopowders with different manganese (Mn) and selenium (Se) contents with Mn/Ca and Se/P molar ratio of 1 mol%, 2.5 mol% and 5 mol% were synthesized by wet-co-chemical precipitation method. The results revealed that with either Mn or Se doping, ion-substituted apatite phase was achieved with good crystallographic features. The combined evidence obtained from spectrometric techniques revealed that nanocrystalline HAP was effectively doped with Mn and Se ions, where Se in form of SeO₃^2- replaced PO₄^3- and Mn²⁺ replaced Ca²⁺. Mn and Se doped HAP samples exhibited rod-like and needle-like morphology with strong tendency to form agglomerates. HAP enriched with Mn and Se represented a strong antibacterial effect and also showed prominent blood compatibility. From the biocompatibility testing, it was evident that Mn and Se doped HAP augmented the osteoblasts adhesion, migration and proliferation in a dose-dependent manner. To conclude from this study, it is clearly evident that the doping amount of both Mn and Se ions can determine the size and morphology of the final HAP product. Therefore, Mn and Se HAP nanopowders with molar ratio less than 5 mol% without any heat treatment can provide good crystallographic features to HAP with satisfying micro-structural, thermal and biological properties.

Platinum-loaded, selenium-doped hydroxyapatite nanoparticles selectively reduce proliferation of prostate and breast cancer cells co-cultured in the presence of stem cells

Chemotherapeutic treatment of patients with bone tumors or bone metastases often leads to severe side effects such as high drug toxicity, lack of tumor specificity and induced drug resistance. A novel strategy to treat early stages of bone metastases involves local co-delivery of multiple chemotherapeutic agents to synergistically improve the curative effect and overcome shortcomings of traditional chemotherapy. Herein we show that selenite-doped hydroxyapatite nanoparticles loaded with a hydroxyapatite-binding anti-tumor platinum complex (PtPP-HASe) selectively reduce proliferation of cancer cells without reducing proliferation of bone marrow stem cells. These PtPP-HASe particles were nanocrystalline with selenium (Se) and platinum (Pt) contents ranging between 0-10 and 1.5-3 wt%, respectively. Release kinetics of Se and Pt from PtPP-HASe nanoparticles resulted in a cumulative release of ∼10 and ∼66 wt% after 7 days, respectively. At a Pt/Se ratio of 8, released Pt and Se species selectively reduced cell number of human prostate (PC3) and human breast cancer cells (MDA-MB-231) by a factor of >10 with limited effects on co-cultured human bone marrow stem cells (hBMSc). These novel nanoparticles demonstrate high anti-cancer selectivity, which offers ample opportunities for the design of novel biomaterials with potent and selective chemotherapeutic efficacy against cancer cells.

Antibacterial Composite Materials Based on the Combination of Polyhydroxyalkanoates With Selenium and Strontium Co-substituted Hydroxyapatite for Bone Regeneration

Due to the threat posed by the rapid growth in the resistance of microbial species to antibiotics, there is an urgent need to develop novel materials for biomedical applications capable of providing antibacterial properties without the use of such drugs. Bone healing represents one of the applications with the highest risk of postoperative infections, with potential serious complications in case of bacterial contaminations. Therefore, tissue engineering approaches aiming at the regeneration of bone tissue should be based on the use of materials possessing antibacterial properties alongside with biological and functional characteristics. In this study, we investigated the combination of polyhydroxyalkanoates (PHAs) with a novel antimicrobial hydroxyapatite (HA) containing selenium and strontium. Strontium was chosen for its well-known osteoinductive properties, while selenium is an emerging element investigated for its multi-functional activity as an antimicrobial and anticancer agent. Successful incorporation of such ions in the HA structure was obtained. Antibacterial activity against Staphylococcus aureus 6538P and Escherichia coli 8739 was confirmed for co-substituted HA in the powder form. Polymer-matrix composites based on two types of PHAs, P(3HB) and P(3HO-co-3HD-co-3HDD), were prepared by the incorporation of the developed antibacterial HA. An in-depth characterization of the composite materials was conducted to evaluate the effect of the filler on the physicochemical, thermal, and mechanical properties of the films. In vitro antibacterial testing showed that the composite samples induce a high reduction of the number of S. aureus 6538P and E. coli 8739 bacterial cells cultured on the surface of the materials. The films are also capable of releasing active ions which inhibited the growth of both Gram-positive and Gram-negative bacteria.

Loading and Releasing Behavior of Selenium and Doxorubicin Hydrochloride in Hydroxyapatite with Different Morphologies

Doxorubicin (Dox)-loaded or selenium-substituted hydroxyapatite (HA) has been developed to achieve anti-osteosarcoma or bone regeneration in a number of studies. However, currently, there is a lack of studies on the combination of Dox and selenium loading in/on HA and comparative research studies on which form and size of HA are more suitable for drug loading and release in the treatment osteogenesis after osteosarcoma resection. Herein, selenium-doped rod-shaped nano-HA (n-HA) and spherical mesoporous HA (m-HA) were successfully prepared. The doping efficiency of selenium and the Dox loading capacity of selenium-doped HA with different morphologies were studied. The release kinetics of Dox and the selenium element in phosphate-buffered saline with different pH values was also comparatively investigated. The drug loading results showed that n-HA exhibited 3 times higher selenium doping amount than m-HA, and the Dox entrapment efficiency of selenium-doped n-HA (0.1Se-n-HA) presented 20% higher than that of selenium-doped m-HA (0.1Se-m-HA). The Dox release behaviors of HA in two different morphologies showed similar release kinetics, with almost the same Dox releasing ratio but slightly more Dox releasing amount in selenium-doped HA than in HA without selenium. The selenium release from selenium-doped n-HA-D (0.1Se-n-HA-D) particles was 2 times as much as that of selenium-doped m-HA-D (0.1Se-m-HA) particles. Our study indicated that n-HA loaded with Dox and selenium may be a promising drug delivery strategy for inhibition of osteosarcoma recurrence and promoting osteogenesis simultaneously.

In-vivo Investigations of Hydroxyapatite/Co-polymeric Composites Coated Titanium Plate for Bone Regeneration

A perfect mimic of human bone is very difficult. Still, the latest advancement in biomaterials makes it possible to design composite materials with morphologies merely the same as that of bone tissues. In the present work is the fabrication of selenium substituted Hydroxyapatite (HAP-Se) covered by lactic acid (LA)-Polyethylene glycol (PEG)-Aspartic acid (AS) composite with the loading of vincristine sulfate (VCR) drug (HAP-Se/LA-PEG-AS/VCR) for twin purposes of bone regenerations. The HAP-Se/LA-PEG-AS/VCR composite coated on titanium implant through electrophoretic deposition (EPD). The prepared composite characterized using FTIR, XRD techniques to rely on the composites' chemical nature and crystalline status. The morphology of the composite and the titanium plate with the composite coating was investigated by utilizing SEM, TEM instrument techniques, and it reveals the composite has porous morphology. The drug (VCR) load in HAP-Se/LA-PEG-AS and releasing nature were investigated through UV-Visible spectroscopy at the wavelength of 295 nm. In vitro study of SBF treatment shows excellent biocompatibility to form the HAP crystals. The viability against MG63 and toxicity against Saos- 2 cells have expressed the more exceptional biocompatibility in bone cells and toxicity with the cancer cells of prepared composites. The in-vivo study emphasizes prepared biomaterial suitable for implantation and helps accelerate bone regeneration on osteoporosis and osteosarcoma affected hard tissue.

Selenium-doped hydroxyapatite nanoparticles for potential application in bone tumor therapy

In the present study we have studied the incorporation and release of selenite ions (SeO₃^2-) in hydroxyapatite nanoparticles for the treatment of bone tumors. Two types of selenium-doped hydroxyapatite (HASe) nanoparticles (NPs) with a nominal Se/(P + Se) molar ratio ranging from 0.01 up to 0.40 have been synthesized by a new and mild wet method. The two series of samples were thoroughly characterized and resulted to be slightly different in chemical composition, but they had similar properties in terms of morphology and degree of crystallinity. Selenium release from HASe was investigated under neutral and acidic conditions to simulate both healthy tissues and the low-pH environment surrounding a tumor mass, respectively. The comparison of the release profiles at two pH values clearly showed the possibility of modulating the Se release by simply changing the amount of Se in the HASe particles. The correlation between the physicochemical properties of HASe and their dissolution as a function of pH has been also investigated to facilitate future application of the NPs as chemotherapeutic adjuvant agents. Finally, the cytotoxic activity of HASe was evaluated using prostate (PC3) and breast (MDA-MB-231) cancer cells as well as healthy human bone marrow stem cells (hBMSc). HASe NPs exerted a good cytocompatibility at low concentration of Se but, with high Se doping concentration, they displayed strong cytotoxicity.

Delivering Proangiogenic Factors from 3D-Printed Polycaprolactone Scaffolds for Vascularized Bone Regeneration

Natural bone is a highly vascularized tissue that relies on the vasculature for blood and nutrients supply to maintain skeletal integrity. Inadequacy of neovascularization may compromise the tissue ingrowth to the implanted scaffolds, and eventually results in failure for the repair. To tackle this issue and enhance self-vascularized bone regeneration, herein a 3D biomimetic selective lasersintering (SLS) derived scaffold, with an angiogenic growth factor immobilized on its surface, that can be released in a controlled manner is proposed. To this end, a porous polycaprolactone/hydroxyapatite (PCL/HA) scaffold is prepared via the SLS technique, which is further modified with vascular endothelial growth factor (VEGF) by coprecipitation with apatite. The resultant scaffold (PCL/HA/VEGF) has an excellent cytocompatibility, and subcutaneous implantation experiment shows that the VEGF-loaded scaffold significantly enhances the blood vessel formation compared with the VEGF-free control. It is further demonstrated that the PCL/HA/VEGF scaffold is able to enhance the in vivo bone regeneration in a rat cranial defect model. Taken together, the current study provides not only a feasible and promising scaffold candidate to enhance the vascularized bone regeneration, but also a general strategy to overcome the inadequate vascularization issue for the repair of other tissue and organs.

Empirical and theoretical insights into the structural effects of selenite doping in hydroxyapatite and the ensuing inhibition of osteoclasts

The use of ions as therapeutic agents has the potential to minimize the use of small-molecule drugs and biologics for the same purpose, thus providing a potentially more economic and less adverse means of treating, ameliorating or preventing a number of diseases. Hydroxyapatite (HAp) is a solid compound capable of accommodating foreign ions with a broad range of sizes and charges and its properties can dramatically change with the incorporation of these ionic additives. While most ionic substitutes in HAp have been monatomic cations, their lesser atomic weight, higher diffusivity, chaotropy and a lesser residence time on surfaces theoretically makes them prone to exert a lesser influence on the material/cell interaction than the more kosmotropic oxyanions. Selenite ion as an anionic substitution in HAp was explored in this study for its ability to affect the short-range and the long-range crystalline symmetry and solubility as well as for its ability to affect the osteoclast activity. We combined microstructural, crystallographic and spectroscopic analyses with quantum mechanical calculations to understand the structural effects of doping HAp with selenite. Integration of selenite ions into the crystal structure of HAp elongated the crystals along the c-axis, but isotropically lowered the crystallinity. It also increased the roughness of the material in direct proportion with the content of the selenite dopant, thus having a potentially positive effect on cell adhesion and integration with the host tissue. Selenite in total acted as a crystal structure breaker, but was also able to bring about symmetry at the local and global scales within specific concentration windows, indicating a variety of often mutually antagonistic crystallographic effects that it can induce in a concentration-dependent manner. Experimental determination of the lattice strain coupled with ab initio calculations on three different forms of carbonated HAp (A-type, B-type, AB-type) demonstrated that selenite ions initially substitute carbonates in the crystal structure of carbonated HAp, before substituting phosphates at higher concentrations. The most energetically favored selenite-doped HAp is of AB-type, followed by the B-type and only then by the A-type. This order of stability was entailed by the variation in the geometry and orientation of both the selenite ion and its neighboring phosphates and/or carbonates. The incorporation of selenite in different types of carbonated HAp also caused variations of different thermodynamic parameters, including entropy, enthalpy, heat capacity, and the Gibbs free energy. Solubility of HAp accommodating 1.2 wt% of selenite was 2.5 times higher than that of undoped HAp and the ensuing release of the selenite ion was directly responsible for inhibiting RAW264.7 osteoclasts. Dose-response curves demonstrated that the inhibition of osteoclasts was directly proportional to the concentration of selenite-doped HAp and to the selenite content in it. Meanwhile, selenite-doped HAp had a significantly less adverse effect on osteoblastic K7M2 and MC3T3-E1 cells than on RAW264.7 osteoclasts. The therapeutically promising osteoblast vs. osteoclast selectivity of inhibition was absent when the cells were challenged with undoped HAp, indicating that it is caused by selenite ions in HAp rather than by HAp alone. It is concluded that like three oxygens building the selenite pyramid, the coupling of (1) experimental materials science, (2) quantum mechanical modeling and (3) biological assaying is a triad from which a deeper understanding of ion-doped HAp and other biomaterials can emanate.

Selenium intracanal dressing: effects on the periapical immune response

OBJECTIVES

To evaluate the selenium (Se) behavior when used as an endodontic dressing in teeth with pulp necrosis. Additionally, its effects was also compared with the calcium hydroxide (C.H.), which is used globally as a root canal dressing, and the combination of the C.H. with Se (C.H. + Se).

MATERIALS AND METHODS

The sample consisted of 60 patients requiring endodontic treatment who were divided into groups, i.e., without intracanal medication (empty) and with medications as follows: selenium (Se), calcium hydroxide (C.H.), and calcium hydroxide + selenium (C.H. + Se) (n = 15). After the coronary opening, three absorbent paper points were placed in the RCS and maintained for 2 min for microbial evaluation. Following the cleaning and shaping procedures, new paper points were introduced into the root canal system, passing passively through the root apex (2 mm) into the periapical tissues for 2 min, for immune evaluation. The collections were performed again 15 days later. Real-time PCR quantified the expression of the prokaryotic 16S ribosomal RNA. The 16S mRNA was evaluated before the cleaning and shaping procedures and 15 days later in the groups treated with or without medication.

RESULTS

A significant reduction in the microbial load was observed only in the groups that received endodontic dressing (p < 0.05). The cytokines IFN-γ, TNF-α, IL-1α, IL-17A, IL-10, IL-6 and MCP-1, were also quantified by real-time PCR. There was an increase in the gene expression level of the cytokines (T15) TNF-α and IL-10 in the C.H. group compared to the other groups (p < 0.05). The IFN-γ mRNA expression was reduced in the groups treated with the medications (Se, C.H., and C.H. + Se).

CONCLUSIONS

The findings of the present study indicate that in the case of treatment over multiple sessions, the use of root canal dressing is essential to avoid the root canal system (RCS) microbial recolonization. Selenium potentiated the effects of calcium hydroxide inducing an anti-inflammatory response in periapical tissues.

CLINICAL RELEVANCE

Se is a mineral essential for the formation of the amino acid selenocysteine, which is directly involved in the maintenance of the immune response. Selenium has been widely used in the medical field in the treatment of cancer, as an activator of bone metabolism, and as a stimulator of the immune system. In this study, it was shown that the incorporation of Se, whether as intracanal medication alone or in conjunction with other medications, may potentiate periapical tissue repair after RCS cleaning and shaping procedures.

Nanostructured selenium-doped biphasic calcium phosphate with in situ incorporation of silver for antibacterial applications

Selenium-doped nanostructure has been considered as an attractive approach to enhance the antibacterial activity of calcium phosphate (CaP) materials in diverse medical applications. In this study, the selenium-doped biphasic calcium phosphate nanoparticles (SeB-NPs) were first synthesized. Then, silver was in situ incorporated into SeB-NPs to obtain nanostructured composite nanoparticles (AgSeB-NPs). Both SeB-NPs and AgSeB-NPs were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), ultraviolet-visible spectroscopy (UV-Vis), X-ray photoelectron spectroscopy (XPS), and Raman spectra. The results confirmed that the SeO32- was doped at the PO43- position and silver nanoparticles were deposited on the surface of SeB-NPs. Next, Transmission Electron Microscopy (TEM) analysis displayed that the prepared AgSeB-NPs had a needle-cluster-like morphology. CCK-8 analysis revealed SeB-NPs and AgSeB-NPs had good cytocompatibility with osteoblasts. The antibacterial activity of the prepared AgSeB-NPs was confirmed by using Gram-negative E. coli and Gram-positive S. aureus. The above results manifested the significance of the final AgSeB-NPs for biomedical applications.

In vitro evaluation of bone cements impregnated with selenium nanoparticles stabilized by phosphatidylcholine (PC) for application in bone

One of the most common prophylactic techniques to solve prosthetic joint infection (PJI) is incorporation of antibiotics into acrylic bone cement to prevent bacterial colonization and proliferation by providing local antibiotic delivery directly at the implant site. Further, there has been a significant concern over the efficacy of commonly used antibiotics within bone cement due to the rise in multi-drug resistant (MDR) microorganisms. Selenium is an essential trace element that has multiple beneficial effects for human health and its chemotherapeutic action is well known. It was reported that nanostructured selenium enhanced bone cell adhesion and has an increased osteoblast function. In this context, we used the selenium nanoparticles (SeNPs) to improve antibacterial and antioxidant properties of poly (methyl methacrylate) (PMMA) and tri calcium phosphate (TCP)-based bone cements, and to reduce of the infection risk caused by orthopedic implants. As another novelty of this study, we proposed phosphatidylcholine (PC) as a unique and natural stabilizer in the synthesis of selenium nanoparticles. After the structural analysis of the prepared bone cements was performed, in vitro osteointegration and antibacterial efficiency were tested using MC3T-E1 (mouse osteoblastic cell line) and SaOS-2 (human primary osteogenic sarcoma) cell lines, and S. aureus (Gram positive) and E.coli (Gram negative) strains, respectively. More importantly, PC-SeNPs-reinforced bone cements exhibited significant effect against E. coli, compared to S. aureus and a dose-dependent antibacterial activity against both bacterial strains tested. Meanwhile, these bone cements induced the apoptosis of SaOS-2 through increased reactive oxygen species without negatively influencing the viability of the healthy cell line. Furthermore, the obtained confocal images revealed that PC-SeNPs (103.7 ± 0.56 nm) altered the cytoskeletal structure of SaOS-2 owing to SeNPs-induced apoptosis, when MC3T3-E1 cells showed a typical spindle-shaped morphology. Taken together, these results highlighted the potential of PC-SeNPs-doped bone cements as an effective graft material in bone applications.

Novel Hybrid Composites Based on PVA/SeTiO2 Nanoparticles and Natural Hydroxyapatite for Orthopedic Applications: Correlations between Structural, Morphological and Biocompatibility Properties

The properties of poly(vinyl alcohol) (PVA)-based composites recommend this material as a good candidate for the replacement of damaged cartilage, subchondral bone, meniscus, humeral joint and other orthopedic applications. The manufacturing process can be manipulated to generate the desired biomechanical properties. However, the main shortcomings of PVA hydrogels are related to poor strength and bioactivity. To overcome this situation, reinforcing elements are added to the PVA matrix. The aim of our work was to develop and characterize a novel composition based on PVA reinforced with Se-doped TiO2 nanoparticles and natural hydroxyapatite (HA), for possible orthopedic applications. The PVA/Se-doped TiO2 composites with and without HA were structurally investigated by FTIR and XRD, in order to confirm the incorporation of the inorganic phase in the polymeric structure, and by SEM and XRF, to evidence the ultrastructural details and dispersion of nanoparticles in the PVA matrix. Both the mechanical and structural properties of the composites demonstrated a synergic reinforcing effect of HA and Se-doped TiO2 nanoparticles. Moreover, the tailorable properties of the composites were proved by the viability and differentiation potential of the bone marrow mesenchymal stem cells (BMMSC) to osteogenic, chondrogenic and adipogenic lineages. The novel hybrid PVA composites show suitable structural, mechanical and biological features to be considered as a promising biomaterial for articular cartilage and subchondral bone repair.

The correlation between the methylation of PTEN gene and the apoptosis of osteosarcoma cells mediated by SeHA nanoparticles

The invasive spreading of residual osteosarcoma cells becomes a serious threat to human health, urgently needing new bone regenerative biomaterials for orthopedic therapy. Thus, in this work, selenite-substituted hydroxyapatite (SeHA) nanoparticles were prepared for both inhibiting the recurrence of the tumor and accelerating the regenerative repair of bone defect. Physicochemical characterization showed these synthetic nanoparticles were spherical poly-crystals with the shape of snowflakes. Such structure benefited them to inhibit the cellular viability of osteosarcoma cells by about (58.90 ± 14.37)% during 24 h co-culturing. The expression level of cell growth-related genes such as PTEN, MMP-9, Cyclin D1, Cyclin A2, Annexin A2 and CDC2 decreased. Bisulfite Sequence PCR of PTEN gene exhibited about (22.40 ± 5.39)%, (45.91 ± 6.36)% and (25.90 ± 5.36)% promoter methylation in control, HA and SeHA group. Animal experiment also proved the similar effects. Almost no recurrence were observed in SeHA group. Oppositely, the slowly recurrent growth of the remnant tumor appeared in purely surgical group. The overall survival and toxicity analysis showed that, in the usage dose of 0-0.1 g, the SeHA-0.01 exhibited higher inhibitory recurrence and metastasis potentials, lower renal toxicity and better anti-inflammation function. Immunohistochemistry stain showed the reduced expression of PTEN, MMP-9, Ki-67 and Annexin A2, but slightly increased expression of DNMT1 and BMP-2. Compared the methylation status of PTEN gene in each group, it was confirming that SeHA nanoparticles hardly possessed the de-methylation effect, but the pure HA strikingly increased the methylation level of such gene. It seemed the dopant selenite ions possessed de-methylation effect onto PTEN gene. Therefore, from the viewpoint of inhibiting metastatic potentials, the SeHA-0.01 might be a feasible biomaterial to inhibit the relapse of the tumor post-surgery.

Emerging Anticancer Potentials of Selenium on Osteosarcoma

Selenium is a trace element essential to humans and forms complexes with proteins, which exert physiological functions in the body. In vitro studies suggested that selenium possesses anticancer effects and may be effective against osteosarcoma. This review aims to summarise current evidence on the anticancer activity of inorganic and organic selenium on osteosarcoma. Cellular studies revealed that inorganic and organic selenium shows cytotoxicity, anti-proliferative and pro-apoptotic effects on various osteosarcoma cell lines. These actions may be mediated by oxidative stress induced by selenium compounds, leading to the activation of p53, proapoptotic proteins and caspases. Inorganic selenium is selective towards cancer cells, but can cause non-selective cell death at a high dose. This condition challenges the controlled release of selenium from biomaterials. Selenium treatment in animals inoculated with osteosarcoma reduced the tumour size, but did not eliminate the incidence of osteosarcoma. Only one study investigated the relationship between selenium and osteosarcoma in humans, but the results were inconclusive. In summary, although selenium may exert anticancer properties on osteosarcoma in experimental model systems, its effects in humans require further investigation.

Hierarchically designed bone scaffolds: From internal cues to external stimuli

Bone tissue engineering utilizes three critical elements - cells, scaffolds, and bioactive factors - to recapitulate the bone tissue microenvironment, inducing the formation of new bone. Recent advances in materials development have enabled the production of scaffolds that more effectively mimic the hierarchical features of bone matrix, ranging from molecular composition to nano/micro-scale biochemical and physical features. This review summarizes recent advances within the field in utilizing these features of native bone to guide the hierarchical design of materials and scaffolds. Biomimetic strategies discussed in this review cover several levels of hierarchical design, including the development of element-doped compositions of bioceramics, the usage of molecular templates for in vitro biomineralization at the nanoscale, the fabrication of biomimetic scaffold architecture at the micro- and nanoscale, and the application of external physical stimuli at the macroscale to regulate bone growth. Developments at each level are discussed with an emphasis on their in vitro and in vivo outcomes in promoting osteogenic tissue development. Ultimately, these hierarchically designed scaffolds can complement or even replace the usage of cells and biological elements, which present clinical and regulatory barriers to translation. As the field progresses ever closer to clinical translation, the creation of viable therapies will thus benefit from further development of hierarchically designed materials and scaffolds.

Catechins-Modified Selenium-Doped Hydroxyapatite Nanomaterials for Improved Osteosarcoma Therapy Through Generation of Reactive Oxygen Species

Osteosarcoma is the most common bone cancer with limited therapeutic options. It can be treated by selenium-doped hydroxyapatite owing to its known antitumor potential. However, a high concentration of Se is toxic toward normal and stem cells whereas its low concentration cannot effectively remove cancer cells. Therefore, the current study was aimed to improve the anticancer activity of Se-HAp nanoparticles through catechins (CC) modification owing to their high cancer therapeutic value. The sequentially developed catechins modified Se-HAp nanocomposites (CC/Se-HAp) were characterized for various physico-chemical properties and antitumor activity. Structural analysis showed the synthesis of small rod-like single phase HAp nanoparticles (60 ± 15 nm), which effectively interacted with Se and catechins and formed agglomerated structures. TEM analysis showed the internalization and degradation of CC/Se-HAp nanomaterials within MNNG/HOS cells through a non-specific endocytosis process. Cell toxicity analysis showed that catechins modification improved the antitumor activity of Se-HAp nanocomposites by inducing apoptosis of human osteosarcoma MNNG/HOS cell lines, through generation of reactive oxygen species (ROS) which in turn activated the caspase-3 pathway, without significantly affecting the growth of human normal bone marrow stem cells (hBMSCs). qPCR and western blot analyses revealed that casp3, p53, and bax genes were significantly upregulated while cox-2 and PTK-2 were slightly downregulated as compared to control in CC/Se-HAp-treated MNNG/HOS cell lines. The current study of combining natural biomaterial (i.e., catechins) with Se and HAp, can prove to be an effective therapeutic approach for bone cancer therapy.

Enhanced mesenchymal stem cell proliferation through complexation of selenium/titanium nanocomposites

The main target of this work was to explore the proliferative impact of selenium dioxide nanoparticles (SeO₂) and selenium dioxide/titanium dioxide nanocomposites (Se/Ti (I), (II) and (III)) on mesenchymal stem cells (MSCs). For this purpose, SeO₂ and Se/Ti (I), (II) and (III) were prepared by facile one step method and characterized by transmission electron microscopy (TEM), Zetasizer, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscope (SEM) along with energy-dispersive X-ray spectrometry (EDX) with reference to SeO₂ nanoparticles. Also, MSCs were isolated from rat bone marrow (BM-MSCs) and adipose tissue (ADSCs), propagated and characterized by flow cytometry. Thereafter, the proliferative effect of the fabricated nanomaterials was investigated by MTT assay. The TEM and DLS results, revealed that the average particle size of the suggested nanomaterials was in nanoscale. XRD pattern showed well crystalline structure for SeO₂ nanoparticles and Se/Ti (I), (II) and (III) nanocomposites; the decreasing of the crystalline phase was observed by increasing the wt% of TiO₂. The designed nanomaterials showed proliferative effects on MSCs with the most prominent effect exerted by 2 µg/ml of Se/Ti (III) and 5 µg/ml of Se/Ti (II) for ADSCs and 20 µg/ml of Se/Ti (II) and 10 µg/ml of Se/Ti (III) for BM-MSCs. Therefore, these newly designed nanomaterials have a promising influence on MSCs proliferation and they are recommended to be utilized in the filed of tissue engineering.

Selenium-doped hydroxyapatite biopapers with an anti-bone tumor effect by inducing apoptosis

Functional Se-HA/chitosan biopapers constructed with self-assembled Se-doped HA nanowires and chitosan have been reported and display high performances in in vitro/vivo anti-tumor studies.

Selenium-Enriched Brushite: A Novel Biomaterial for Potential Use in Bone Tissue Engineering

In this study, a novel biomaterial, i.e., brushite containing 0.67 wt% of selenium (Se-Bru) was synthesized via a wet precipitation method. Pure, unsubstituted brushite (Bru) was synthesized via the same method and used as a reference material. Different techniques of instrumental analysis were applied to investigate and compare physicochemical properties of both materials. Fourier-Transform Infrared Spectroscopy confirmed the chemical identity of both materials. Scanning Electron Microscopy (SEM) was used to study the morphology and indicated that both samples (Bru and Se-Bru) consisted of plate-like microcrystals. Powder X-ray Diffraction (PXRD) showed that Bru, as well as Se-Bru were crystallographically homogenous. What is more, the data obtained from PXRD studies revealed that the substitution of selenite ions into the crystal structure of the material had clearly affected its lattice parameters. The incorporation of selenium was also confirmed by solid-state ¹H→31P CP MAS kinetics experiments. Additionally, studies on the release kinetics of the elements forming Se-Bru and preliminary cytotoxicity tests were conducted. This preliminary research will favor a better understanding of ionic substitution in calcium phosphates and may be a starting point for the development of selenium-doped brushite cements for potential use in bone tissue impairments treatment.

Biogenesis of Selenium Nanoparticles Using Green Chemistry

Selenium binds some enzymes such as glutathione peroxidase and thioredoxin reductase, which may be activated in biological infections and oxidative stress. Chemical and physical methods for synthesizing nanoparticles, apart from being expensive, have their own particular risks. However, nanoparticle synthesis through green chemistry is a safe procedure that different biological sources such as bacteria, fungi, yeasts, algae and plants can be the catalyst bed for processing. Synthesis of selenium nanoparticles (SeNPs) by macro/microorganisms causes variation in morphology and shape of the particles is due to diversity of reduction enzymes in organisms. Reducing enzymes of microorganisms by changing the status of redox convert metal ions (Se^2-) to SeNPs without charge (Se⁰). Biological activity of SeNPs includes their protective role against DNA oxidation. Because of the biological and industrial properties, SeNPs have wide applications in the fields of medicine, microelectronic, agriculture and animal husbandry. SeNPs can show strong antimicrobial effects on the growth and proliferation of microorganisms in a dose-dependent manner. The objective of this review is to consider SeNPs applications to various organisms.

Design of alveolate Se-inserted TiO2 and its effect on osteosarcoma cells and osteoblasts

The experiments in vitro/vivo evidence that an alveolate TiO₂@Se nano-grid with controllable diameter shows good anti-tumor properties and biocompatibility.

Monodisperse selenium-substituted hydroxyapatite: Controllable synthesis and biocompatibility

Hydroxyapatite (HA) is the major inorganic component of natural bone tissue. As an essential trace element, selenium involves in antioxidation and anticancer of human body. So far, ion-doped hydroxyapatites (HAs) are widely investigated owing to their great applications in field of biomaterial, biological labeling. In this paper, series of monodisperse HA doped with SeO₃^2- (SeHA) was successfully synthesized based on the liquid-solid-solution (LSS) strategy. The obtained samples were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR) and energy-dispersive spectrometer (EDS). The results indicated that the SeO₃^2- doping level of the Se/(P+Se) molar ratio of 0-0.4 can be requisitely controlled, and the morphology of SeHA nanoparticles varied from nanorods to nanoneedles with increasing Se/(P+Se) molar ratio. Significantly, the as-synthesized SeHA nanocrystals exhibit a low cytotoxicity for osteoblastic cells, showing exciting potentials for application in artificial scaffold materials inhibiting of tumor growth in bone.

Applied Nanotechnology and Nanoscience in Orthopedic Oncology

Nanomedicine is based on the fact that biological molecules behave similarly to nanomolecules, which have a size of less than 100 nm, and is now affecting most areas of orthopedics. In orthopedic oncology, most of the in vitro and in vivo studies have used osteosarcoma or Ewing sarcoma cell lineages. In this article, tumor imaging and treatment nanotechnology applications, including nanostructure delivery of chemotherapeutic agents, gene therapy, and the role of nano-selenium-coated implants, are outlined. Finally, the potential role of nanotechnology in addressing the challenges of drug and radiotherapy resistance is discussed. [Orthopedics. 2016; 39(5):280-286.].

Nanocrystalline hydroxyapatite enriched in selenite and manganese ions: physicochemical and antibacterial properties

In this work, we used the co-precipitation method to synthesize hydroxyapatite (Mn-SeO3-HA) containing both selenium IV (approximately 3.60 wt.%) and manganese II (approximately 0.29 wt.%). Pure hydroxyapatite (HA), hydroxyapatite-containing manganese (II) ions (Mn-HA), and hydroxyapatite-containing selenite ions alone (SeO3-HA), prepared with the same method, were used as reference materials. The structures and physicochemical properties of all the obtained samples were investigated. PXRD studies showed that the obtained materials were homogeneous and consisted of apatite phase. Introducing selenites into the hydroxyapatite crystals considerably affects the size and degree of ordering. Experiments with transmission electron microscopy (TEM) showed that Mn-SeO3-HA crystals are very small, needle-like, and tend to form agglomerates. Fourier transform infrared spectroscopy (FT-IR) and solid-state nuclear magnetic resonance (ssNMR) were used to analyze the structure of the obtained material. Preliminary microbiological tests showed that the material demonstrated antibacterial activity against Staphylococcus aureus, yet such properties were not confirmed regarding Escherichia coli. PACS codes: 61, 76, 81.

Selenite-Releasing Bone Mineral Nanoparticles Retard Bone Tumor Growth and Improve Healthy Tissue Functions In Vivo

Selenite-doped bone mineral nanoparticles can retard the growth of osteosarcoma in a nude mice model, through sustained release of selenite ions. The selenite ions released from the nanoparticles through a degradation-mediated fashion inhibit tumor metastasis. Blood routine analysis indicates that selenite ions can also improve the functions of liver, kidney, and heart.

Carboxylic group-induced synthesis and characterization of selenium nanoparticles and its anti-tumor potential on Dalton's lymphoma cells

Carboxylic group-induced synthesis of selenium nanoparticles (SeNPs) was achieved using sodium selenosulphate as a precursor. The particles were stabilized and capped with 0.01% polyvinyl alcohol under ambient conditions. This is a simple and easy method of producing SeNPs in a size range from 35 to 105 nm. The synthesized SeNPs were purified by centrifugation at 11,500 × g for 20 min and characterized by UV-visible spectroscopy, FTIR spectroscopy, XRD, DSC and TEM. It was observed that the synthesized SeNPs showed differences in their absorption spectra, phase composition and crystal structure, thermodynamic behaviour, size and shape. Further, to confirm anti-tumour potential of the synthesized SeNPs induced by the carboxylic group of acetic acid, pyruvic acid and benzoic acid, cell viability assay, nuclear morphology testing and DNA fragmentation assay were carried out using Dalton's lymphoma (DL) cells. DL cells treated with the SeNPs showed reduced cell viability, altered nuclear morphology, typical apoptotic DNA ladder and apoptosis. Therefore, these SeNPs may have therapeutic relevance to treat this type of cancer.

Enhanced healing of rat calvarial critical size defect with selenium-doped lamellar biocomposites

A 3D porous lamellar selenium-containing nano-hydroxyapatite (SeHAN)/chitosan (CS) biocomposite was synthesized. The selenium-containing hydroxyapatite (HA) grains of 150~200 nm in length and 20~30 nm in width were observed by dynamic light scattering and transmission electron microscopy. A combination of X-ray diffraction, Fourier-transform infrared spectroscopy, and SEM indicated that HA particles were uniformly dispersed in chitosan matrix and there was a chemical interaction between chitosan and HA. Then, a standard critical size calvarial bone defect was created in Wistar rats. In group 1, no implant was made in the defect. In groups 2 and 3, HA nanoparticles (HAN)/CS biocomposite and SeHAN/CS biocomposite were implanted into the defect, respectively. After 4 weeks, the histological assessment clearly exhibited no significant changes, only found some living cells anchored in the periphery of the implants. After 8 and 12 weeks, most newly formed osteoid tissue was found in the SeHAN/CS implant group. Additionally, the newly formed osteoid tissue, both at the edge and in the center of implants, was bioactive and neovascularized. Microfocus computerized tomography measurements also confirmed the much better quality of the newly formed bone tissue in SeHAN/CS implant group than that in HAN/CS implant group (p < 0.01). Collectively, the SeHAN/CS biocomposite, as a bioactive bone grafting substitute, significantly enhanced the repair of bone defect.