A hybrid polymer gel with controlled rates of cross-link rupture and self-repair

Designing Stress-Adaptive Dense Suspensions Using Dynamic Covalent Chemistry

The non-Newtonian behaviors of dense suspensions are central to their use in technological and industrial applications and arise from a network of particle–particle contacts that dynamically adapt to imposed shear. Reported herein are studies aimed at exploring how dynamic covalent chemistry between particles and the polymeric solvent can be used to tailor such stress-adaptive contact networks, leading to their unusual rheological behaviors. Specifically, a room temperature dynamic thia-Michael bond is employed to rationally tune the equilibrium constant (K_eq) of the polymeric solvent to the particle interface. It is demonstrated that low K_eq leads to shear thinning, while high K_eq produces antithixotropy, a rare phenomenon where the viscosity increases with shearing time. It is proposed that an increase in K_eq increases the polymer graft density at the particle surface and that antithixotropy primarily arises from partial debonding of the polymeric graft/solvent from the particle surface and the formation of polymer bridges between particles. Thus, the implementation of dynamic covalent chemistry provides a new molecular handle with which to tailor the macroscopic rheology of suspensions by introducing programmable time dependence. These studies open the door to energy-absorbing materials that not only sense mechanical inputs and adjust their dissipation as a function of time or shear rate but also can switch between these two modalities on demand.

Self-Healing Materials for Electronics Applications

Self-healing materials have been attracting the attention of the scientists over the past few decades because of their effectiveness in detecting damage and their autonomic healing response. Self-healing materials are an evolving and intriguing field of study that could lead to a substantial increase in the lifespan of materials, improve the reliability of materials, increase product safety, and lower product replacement costs. Within the past few years, various autonomic and non-autonomic self-healing systems have been developed using various approaches for a variety of applications. The inclusion of appropriate functionalities into these materials by various chemistries has enhanced their repair mechanisms activated by crack formation. This review article summarizes various self-healing techniques that are currently being explored and the associated chemistries that are involved in the preparation of self-healing composite materials. This paper further surveys the electronic applications of self-healing materials in the fields of energy harvesting devices, energy storage devices, and sensors. We expect this article to provide the reader with a far deeper understanding of self-healing materials and their healing mechanisms in various electronics applications.

Skin-like hydrogel devices for wearable sensing, soft robotics and beyond

Skin-like electronics are developing rapidly to realize a variety of applications such as wearable sensing and soft robotics. Hydrogels, as soft biomaterials, have been studied intensively for skin-like electronic utilities due to their unique features such as softness, wetness, biocompatibility and ionic sensing capability. These features could potentially blur the gap between soft biological systems and hard artificial machines. However, the development of skin-like hydrogel devices is still in its infancy and faces challenges including limited functionality, low ambient stability, poor surface adhesion, and relatively high power consumption (as ionic sensors). This review aims to summarize current development of skin-inspired hydrogel devices to address these challenges. We first conduct an overview of hydrogels and existing strategies to increase their toughness and conductivity. Next, we describe current approaches to leverage hydrogel devices with advanced merits including anti-dehydration, anti-freezing, and adhesion. Thereafter, we highlight state-of-the-art skin-like hydrogel devices for applications including wearable electronics, soft robotics, and energy harvesting. Finally, we conclude and outline the future trends.

Novel Self-Healing Metallocopolymers with Pendent 4-Phenyl-2,2':6',2″-terpyridine Ligand: Kinetic Studies and Mechanical Properties

We report here our successful attempt to obtain self-healing supramolecular hydrogels with new metal-containing monomers (MCMs) with pendent 4-phenyl-2,2′:6′,2″-terpyridine metal complexes as reversible moieties by free radical copolymerization of MCMs with vinyl monomers, such as acrylic acid and acrylamide. The resulting metal-polymer hydrogels demonstrate a developed system of hydrogen, coordination and electron-complementary π–π stacking interactions, which play a critical role in achieving self-healing. Kinetic data show that the addition of a third metal-containing comonomer to the system decreases the initial polymerization rate, which is due to the specific effect of the metal group located in close proximity of the active center on the growth of radicals.

Research on synthesis and self-healing properties of interpenetrating network hydrogels based on reversible covalent and reversible non-covalent bonds

First of all, we will provide a brief background on the self-healing hydrogels we produced which are suitable for the complex environment of nature. In this paper, disulfide bonds and acylhydrazone bonds can be combined in SH-WPU and hydrogen bonds existed in PAMAM. And the hydrogel can achieve self-healing under acid, alkaline, neutral or light environment.Self-healing for 1 h, 24 h and 48 h, the self-healing efficiency is 31.58%, 49.84% and 87.35% respectively. This effect achieved the desired effect and the repair effect is more obvious than previous research results. The hydrogels have potential applications in the field of biomaterials.

Self-Healing Polymers Based on Coordination Bonds

Self-healing ability is an important survival feature in nature, with which living beings can spontaneously repair damage when wounded. Inspired by nature, people have designed and synthesized many self-healing materials by encapsulating healing agents or incorporating reversible covalent bonds or noncovalent interactions into a polymer matrix. Among the noncovalent interactions, the coordination bond is demonstrated to be effective for constructing highly efficient self-healing polymers. Moreover, with the presence of functional metal ions or ligands and dynamic metal-ligand bonds, self-healing polymers can show various functions such as dielectrics, luminescence, magnetism, catalysis, stimuli-responsiveness, and shape-memory behavior. Herein, the recent developments and achievements made in the field of self-healing polymers based on coordination bonds are presented. The advantages of coordination bonds in constructing self-healing polymers are highlighted, the various metal-ligand bonds being utilized in self-healing polymers are summarized, and examples of functional self-healing polymers originating from metal-ligand interactions are given. Finally, a perspective is included addressing the promises and challenges for the future development of self-healing polymers based on coordination bonds.

A Highly Stretchable, Tough, Fast Self-Healing Hydrogel Based on Peptide⁻Metal Ion Coordination

Metal coordination bonds are widely used as the dynamic cross-linkers to construct self-healing hydrogels. However, it remains challenging to independently improve the toughness of metal coordinated hydrogels without affecting the stretchability and self-healing properties, as all these features are directly correlated with the dynamic properties of the same metal coordination bonds. In this work, using histidine-Zn2+ binding as an example, we show that the coordination number (the number of binding sites in each cross-linking ligand) is an important parameter for the mechanical strength of the hydrogels. By increasing the coordination number of the binding site, the mechanical strength of the hydrogels can be greatly improved without sacrificing the stretchability and self-healing properties. By adjusting the peptide and Zn2+ concentrations, the hydrogels can achieve a set of demanding mechanical features, including the Young's modulus of 7-123 kPa, fracture strain of 434-781%, toughness of 630-1350 kJ m-3, and self-healing time of ~1 h. We anticipate the engineered hydrogels can find broad applications in a variety of biomedical fields. Moreover, the concept of improving the mechanical strength of metal coordinated hydrogels by tuning the coordination number may inspire the design of other dynamically cross-linked hydrogels with further improved mechanical performance.

Buildup of Multi-Ionic Supramolecular Network Facilitated by In-Situ Intercalated Organic Montmorillonite in 1,2-Polybutadiene

The development of a sacrificial bond provided unique inspiration for the design of advanced elastomers with excellent mechanical properties, but it is still a huge challenge to construct a homogenous polar sacrificial network in a nonpolar elastomer. In this effort, we proposed a novel strategy to engineer a multi-ionic network into a covalently cross-linked 1,2-polybutadiene (1,2-PB) facilitated by in-situ intercalated organic montmorillonite (OMMT) without phase separation. XRD, SEM, and TEM analysis were carried out to characterize the microstructure of the resulting polymers. Crosslinking density, dielectric performance, and cyclic tensile tests were used to demonstrate the interaction of zinc methacrylate (ZDMA) and OMMT. The dynamic nature of ionic bonds allowed it to rupture and reform to dissipate energy efficiently. Stretching orientation brought parallelism between polymer chains and OMMT layers which was beneficial for the reconstruction of the ionic network, ultimately resulting in high strength and a low stress relaxation rate. Overall, our work presented the design of a uniform and strong sacrificial network in the nano-clay/elastomer nanocomposite with outstanding mechanical performances under both static and dynamic conditions.

Self-healing, stretchable and robust interpenetrating network hydrogels

A self-healable, mechanically strong and stretchable hydrogel network that supports cell encapsulation is reported to be achieved by creation of an interpenetrating network approach between PEG and natural polymers.

Tough Self-Healing Elastomers by Molecular Enforced Integration of Covalent and Reversible Networks

Self-healing polymers crosslinked by solely reversible bonds are intrinsically weaker than common covalently crosslinked networks. Introducing covalent crosslinks into a reversible network would improve mechanical strength. It is challenging, however, to apply this concept to "dry" elastomers, largely because reversible crosslinks such as hydrogen bonds are often polar motifs, whereas covalent crosslinks are nonpolar motifs. These two types of bonds are intrinsically immiscible without cosolvents. Here, we design and fabricate a hybrid polymer network by crosslinking randomly branched polymers carrying motifs that can form both reversible hydrogen bonds and permanent covalent crosslinks. The randomly branched polymer links such two types of bonds and forces them to mix on the molecular level without cosolvents. This enables a hybrid "dry" elastomer that is very tough with fracture energy 13500 Jm-2 comparable to that of natural rubber. Moreover, the elastomer can self-heal at room temperature with a recovered tensile strength 4 MPa, which is 30% of its original value, yet comparable to the pristine strength of existing self-healing polymers. The concept of forcing covalent and reversible bonds to mix at molecular scale to create a homogenous network is quite general and should enable development of tough, self-healing polymers of practical usage.

Rheology of nitrile rubber with hybrid crosslinked network composed of covalent bonding and hydrogen bonding

A hybrid crosslinked network composed of covalent bonding and non-covalent bonding was constructed in nitrile rubber (NBR) by using a compound crosslinking agents dicumyl peroxide (DCP) and N,N-methylenebis acrylamide (MBA).

Supramolecular metallogels with bulk self-healing properties prepared by in situ metal complexation

In this feature article, we discuss a series of contributions dealing with the in situ fabrication of supramolecular metallogels (i.e. using low molecular weight ligands and metal ions) that show self-healing properties of the bulk gel phase after complete physical segregation. Most of the advances in this area have taken place during the last three years and are mainly represented by organogels, whereas examples of hydrogels and organic-aqueous gels are still a minority. In situ gelation via metal-coordination of low molecular weight compounds is conceptually different from the use of premade (e.g. in solution) coordination polymers and polymeric structures as gelators and ligands, respectively. In the case of in situ gelation, the cooperative effects of all components of the mixture (i.e. ligand, metal ion, counterions and solvent molecules) in an appropriate ratio under well-defined experimental conditions play a crucial role in the gelation phenomenon and self-healing properties of the material.

Toughened hydrogels inspired by aquatic caddisworm silk

Aquatic caddisworm silk is a tough adhesive fiber. Part of the toughening mechanism resides in serial, Ca(2+)-phosphate crosslinked nano-domains that comprise H-fibroin, the major structural protein. To mimic the toughening mechanism, a synthetic phosphate-graft-methacrylate prepolymer, as a simple H-fibroin analog, was copolymerized within a covalent elastic network of polyacrylamide. Above a critical phosphate sidechain density, hydrogels equilibrated with Ca(2+) or Zn(2+) ions displayed greatly increased initial stiffness, strain-rate dependent yield behavior, and required 100 times more work to fracture than hydrogels equilibrated with Mg(2+) or Na(+) ions. Conceptually, the enhanced toughness is attributed to energy-dissipating, viscous unfolding of clustered phosphate-metal ion crosslinks at a critical stress. The toughness of the bioinspired hydrogels exceeds the toughness of cartilage and meniscus suggesting potential application as prosthetic biomaterials. The tough hydrogels also provide a simplified model to test hypotheses about caddisworm silk architecture, phosphate metal ion interactions, and mechanochemical toughening mechanisms.

Highly emissive, solution-processable and dynamic Eu(iii)-containing coordination polymers

Preparation of new soluble dynamic coordination networks based on Eu(iii) and a new, rigid ditopic pybox-related ligand.

Dynamic crosslinked poly(styrene-block-butadiene-block-styrene) via Diels–Alder chemistry: an ideal method to improve solvent resistance and mechanical properties without losing its thermal plastic behavior

Poly(styrene-block-butadiene-block-styrene) (SBS) is a typical example of thermal plastic elastomers (TPE).

Predicted rupture force of a single molecular bond becomes rate independent at ultralow loading rates

We present for the first time a theoretical model of studying the saturation of the rupture force of a single molecular bond that causes the rupture force to be rate independent under an ultralow loading rate. This saturation will obviously bring challenges to understanding the rupture behavior of the molecular bond using conventional methods. This intriguing feature implies that the molecular bond has a nonzero strength at a vanishing loading rate. We find that the saturation behavior is caused by bond rebinding when the loading rate is lower than a limiting value depending on the loading stiffness.

Multi-scale multi-mechanism design of tough hydrogels: building dissipation into stretchy networks

As swollen polymer networks in water, hydrogels are usually brittle. However, hydrogels with high toughness play critical roles in many plant and animal tissues as well as in diverse engineering applications. Here we review the intrinsic mechanisms of a wide variety of tough hydrogels developed over the past few decades. We show that tough hydrogels generally possess mechanisms to dissipate substantial mechanical energy but still maintain high elasticity under deformation. The integrations and interactions of different mechanisms for dissipating energy and maintaining elasticity are essential to the design of tough hydrogels. A matrix that combines various mechanisms is constructed for the first time to guide the design of next-generation tough hydrogels. We further highlight that a particularly promising strategy for the design is to implement multiple mechanisms across multiple length scales into nano-, micro-, meso-, and macro-structures of hydrogels.

Self-Healing of Unentangled Polymer Networks with Reversible Bonds

Self-healing polymeric materials are systems that after damage can revert to their original state with full or partial recovery of mechanical strength. Using scaling theory we study a simple model of autonomic self-healing of unentangled polymer networks. In this model one of the two end monomers of each polymer chain is fixed in space mimicking dangling chains attachment to a polymer network, while the sticky monomer at the other end of each chain can form pairwise reversible bond with the sticky end of another chain. We study the reaction kinetics of reversible bonds in this simple model and analyze the different stages in the self-repair process. The formation of bridges and the recovery of the material strength across the fractured interface during the healing period occur appreciably faster after shorter waiting time, during which the fractured surfaces are kept apart. We observe the slowest formation of bridges for self-adhesion after bringing into contact two bare surfaces with equilibrium (very low) density of open stickers in comparison with self-healing. The primary role of anomalous diffusion in material self-repair for short waiting times is established, while at long waiting times the recovery of bonds across fractured interface is due to hopping diffusion of stickers between different bonded partners. Acceleration in bridge formation for self-healing compared to self-adhesion is due to excess non-equilibrium concentration of open stickers. Full recovery of reversible bonds across fractured interface (formation of bridges) occurs after appreciably longer time than the equilibration time of the concentration of reversible bonds in the bulk.

Mussel-inspired histidine-based transient network metal coordination hydrogels

Transient network hydrogels cross-linked through histidine-divalent cation coordination bonds were studied by conventional rheologic methods using histidine-modified star poly(ethylene glycol) (PEG) polymers. These materials were inspired by the mussel, which is thought to use histidine-metal coordination bonds to impart self-healing properties in the mussel byssal thread. Hydrogel viscoelastic mechanical properties were studied as a function of metal, pH, concentration, and ionic strength. The equilibrium metal-binding constants were determined by dilute solution potentiometric titration of monofunctional histidine-modified methoxy-PEG and were found to be consistent with binding constants of small molecule analogs previously studied. pH-dependent speciation curves were then calculated using the equilibrium constants determined by potentiometric titration, providing insight into the pH dependence of histidine-metal ion coordination and guiding the design of metal coordination hydrogels. Gel relaxation dynamics were found to be uncorrelated with the equilibrium constants measured, but were correlated to the expected coordination bond dissociation rate constants.

Interpreting the widespread nonlinear force spectra of intermolecular bonds

Single molecule force spectroscopy probes the strength, lifetime, and energetic details of intermolecular interactions in a simple experiment. A growing number of these studies have reported distinctly nonlinear trends in rupture force with loading rate that are typically explained in conventional models by invoking complex escape pathways. Recent analyses suggested that these trends should be expected even for simple barriers based on the basic assumptions of bond rupture dynamics and thus may represent the norm rather than the exception. Here we explore how these nonlinear trends reflect the two fundamental regimes of bond rupture: (i) a near-equilibrium regime, produced either by bond reforming in the case of a single bond or by asynchronized rupture of multiple individual bonds, and (ii) a kinetic regime produced by fast, non-equilibrium bond rupture. We analyze both single- and multi-bonded cases, describe the full evolution of the system as it transitions between near- and far-from-equilibrium loading regimes, and show that both interpretations produce essentially identical force spectra. Data from 10 different molecular systems show that this model provides a comprehensive description of force spectra for a diverse suite of bonds over experimentally relevant loading rates, removes the inconsistencies of previous interpretations of transition state distances, and gives ready access to both kinetic and thermodynamic information about the interaction. These results imply that single-molecule binding free energies for a vast number of bonds have already been measured.

Directed Self-Assembly of Metallosupramolecular Polymers at the Polymer-Polymer Interface

Directed self-assembly of a metallosupramolecular polymer is achieved at the interface between two polymer films by simple melt pressing. Blends of a 2,6-bis(N-methylbenzimidazolyl)pyridine (MeBip) side-chain functionalized polystyrene in a polystyrene matrix and Zn(NTf₂)₂ in a poly(methyl methacrylate) matrix were pressed together above the T_g of the matrix polymers resulting in diffusion of the components and subsequent self-assembly of the metallosupramolecular polymer at the polymer-polymer interface. The formation of the metallosupramolecular polymer was monitored by spectroscopy and microscopy and it was found that the interfacial self-assembly occurs at the processing temperatures (ca. 210 °C) within 5 min. It was further shown that this materials system resulted in robust films that exhibited a new emergent property, namely, phosphorescence, which is not exhibited by any of the individual components nor the metallosupramolecular polymer itself.