A review of tissue-engineered skin bioconstructs available for skin reconstruction

Contactless mechanical stimulation of the skin using shear waves

The skin, the outermost organ of the human body, is vital for sensing and responding to stimuli through mechanotransduction. It is constantly exposed to mechanical stress. Consequently, various mechanical therapies, including compression, massage, and microneedling, have become routine practices for skin healing and regeneration. However, these traditional methods require direct skin contact, restricting their applicability. To address this constraint, we developed shear wave stimulation (SWS), a contactless mechanical stimulation technique. The effectiveness of SWS was compared with that of a commercial compression bioreactor used on reconstructed skin at various stages of maturity. Despite the distinct stimulus conditions applied by the two methods, SWS yielded remarkable outcomes, similar to the effects of the compression bioreactor. It significantly increased the shear modulus of tissue-engineered skin, heightened the density of collagen and elastin fibers, and resulted in an augmentation of fibroblasts in terms of their number and length. Notably, SWS exhibited diverse effects in the low- and high-frequency modes, highlighting the importance of fine-tuning the stimulus intensity. These results unequivocally demonstrated the capability of SWS to enhance the mechanical functions of the skin in vitro, making it a promising option for addressing wound healing and stretch mark recovery.

Perspective from developers: Tissue-engineered products for skin wound healing

Tissue-engineered products (TEPs) are at the forefront of developmental medicines, precisely where monoclonal antibodies and recombinant cytokines were 30 years ago. TEPs development for treating skin wounds has become a fast-growing field as it offers the potential to find novel therapeutic approaches for treating pathologies that currently have limited or no effective alternatives. This review aims to provide the reader with the process of translating an idea from the laboratory bench to clinical practice, specifically in the context of TEPs designing for skin wound healing. It encompasses historical perspectives, approved therapies, and offers a distinctive insight into the regulatory framework in Brazil. We explore the essential guidelines for quality testing, and nonclinical proof-of-concept considering the Brazilian Network of Experts in Advanced Therapies (RENETA) and International Standards and Guidelines (ICH e ISO). Adopting a multifaceted approach, our discussion incorporates scientific and industrial perspectives, addressing quality, biosafety, non-clinical viability, clinical trial and real-word data for pharmacovigilance demands. This comprehensive analysis presents a panoramic view of the development of skin TEPs, offering insights into the evolving landscape of this dynamic and promising field.

Stimulated Full-Thickness Cutaneous Wound Healing with Bioactive Dressings of Zinc and Cobalt Ion-Doped Bioactive Glass-Coated Eggshell Membranes in a Diabetic Rabbit Model

Eggshell membrane-based biomedical applications have recently received great attention for their wound-healing properties. However, there are limited studies on diabetic wound healing. In this regard, we devised four types of composite eggshell membrane mats with nanoscale coatings of bioactive glass/Zn/Co-doped bioactive glass (ESM + BAG, ESM + ZnBAG, ESM + CoBAG, and ESM + ZnCoBAG) as wound-dressing materials for chronic nonhealing diabetic wounds. A detailed study of the physicochemical properties of the mats was conducted. In vitro studies demonstrated cytocompatibility and viability of human dermal fibroblasts on all four types of mats. The cells also attached finely on the mats with the help of cellular extensions, as evident from scanning electron microscopy (SEM) and rhodamine-phalloidin and Hoechst 33342 staining of cellular components. Endowed with bioactive properties, these mats influenced all aspects of full-thickness skin wound healing in diabetic animal model studies. All of the mats, especially the ESM + ZnCoBAG mat, showed the earliest wound closure, effective renewal, and restructuring of the extracellular matrix in terms of an accurate and timely accumulation of collagen, elastin, and reticulin fibers. Hydroxyproline and sulfated glycosaminoglycans were significantly (p < 0.01, p < 0.05) higher in ESM-ZnCoBAG-treated wounds in comparison to ESM-BAG-treated wounds, which suggests that these newly developed mats have potential as an affordable diabetic wound care solution in biomedical research.

Nanomaterial strategies in wound healing: A comprehensive review of nanoparticles, nanofibres and nanosheets

Wound healing is a complex process that orchestrates the coordinated action of various cells, cytokines and growth factors. Nanotechnology offers exciting new possibilities for enhancing the healing process by providing novel materials and approaches to deliver bioactive molecules to the wound site. This article elucidates recent advancements in utilizing nanoparticles, nanofibres and nanosheets for wound healing. It comprehensively discusses the advantages and limitations of each of these materials, as well as their potential applications in various types of wounds. Each of these materials, despite sharing common properties, can exhibit distinct practical characteristics that render them particularly valuable for healing various types of wounds. In this review, our primary focus is to provide a comprehensive overview of the current state-of-the-art in applying nanoparticles, nanofibres, nanosheets and their combinations to wound healing, serving as a valuable resource to guide researchers in their appropriate utilization of these nanomaterials in wound-healing research. Further studies are necessary to gain insight into the application of this type of nanomaterials in clinical settings.

Breathing new life into tissue engineering: exploring cutting-edge vascularization strategies for skin substitutes

Tissue-engineered skin substitutes (TESS) emerged as a new therapeutic option to improve skin transplantation. However, establishing an adequate and rapid vascularization in TESS is a critical factor for their clinical application and successful engraftment in patients. Therefore, several methods have been applied to improve the vascularization of skin substitutes including (i) modifying the structural and physicochemical properties of dermal scaffolds; (ii) activating biological scaffolds with growth factor-releasing systems or gene vectors; and (iii) developing prevascularized skin substitutes by loading scaffolds with capillary-forming cells. This review provides a detailed overview of the most recent and important developments in the vascularization strategies for skin substitutes. On the one hand, we present cell-based approaches using stem cells, microvascular fragments, adipose tissue derived stromal vascular fraction, endothelial cells derived from blood and skin as well as other pro-angiogenic stimulation methods. On the other hand, we discuss how distinct 3D bioprinting techniques and microfluidics, miRNA manipulation, cell sheet engineering and photosynthetic scaffolds like GelMA, can enhance skin vascularization for clinical applications. Finally, we summarize and discuss the challenges and prospects of the currently available vascularization techniques that may serve as a steppingstone to a mainstream application of skin tissue engineering.

Hydrogels containing KYNA promote angiogenesis and inhibit inflammation to improve the survival rate of multi-territory perforator flaps

BACKGROUND

A new spray adhesive (KYNA-PF127) was established through the combination of thermosensitive hydrogel (Pluronic F127) and KYNA, aimed to investigate the effect of KYNA-PF127 on multi-territory perforator flaps and its possible molecular mechanism.

MATERIALS AND METHODS

36 SD male rats with 250-300 g were randomly divided into 3 groups (n = 12): control group, blank glue group and KYNA-PF127 group. KYNA-PF127 hydrogel was prepared and characterized for its morphology and properties using scanning electron microscopy. CCK-8 assay, scratch wound assay, transwell assay, tube formation assay and Ki67 staining were used to study the effect of KYNA-PF127 on the proliferation, migration, and tube formation of HUVECs. VEGF and FGF2 were measured by qPCR to evaluate the angiogenesis capacity of HUVECs in vitro. In vivo, the effect of each group on the survival area of the cross-zone perforator flap was evaluated, and angiogenesis was evaluated by HE and immunofluorescence (CD31 and MMP-9). The effect of inflammation on skin collagen fibers was assessed by Masson. Immunohistochemistry (SOD1, IL-1β, TNF-α) was used to evaluate the effects of oxidative stress and inflammatory factors on multi-territory flaps.

RESULTS

KYNA-PF127 has good sustained release and biocompatibility at 25% concentration. KYNA-PF127 promoted the proliferation, migration, and angiogenesis of HUVECs in vitro. In vivo, the survival area of multi-territory perforator flaps and angiogenic capability have increased after KYNA-PF127 intervention. KYNA-PF127 could effectively reduce the oxidative stress and inflammation of multi-territory perforator flaps.

CONCLUSION

KYNA-PF127 promotes angiogenesis through its antioxidant stress and anti-inflammatory effects, and shows potential clinical value in promoting the survival viability and drug delivery of multi-territory perforator flaps.

Skin graft with dermis and appendages generated in vivo by cell competition

Autologous skin grafting is a standard treatment for skin defects such as burns. No artificial skin substitutes are functionally equivalent to autologous skin grafts. The cultured epidermis lacks the dermis and does not engraft deep wounds. Although reconstituted skin, which consists of cultured epidermal cells on a synthetic dermal substitute, can engraft deep wounds, it requires the wound bed to be well-vascularized and lacks skin appendages. In this study, we successfully generate complete skin grafts with pluripotent stem cell-derived epidermis with appendages on p63 knockout embryos' dermis. Donor pluripotent stem cell-derived keratinocytes encroach the embryos' dermis by eliminating p63 knockout keratinocytes based on cell-extracellular matrix adhesion mediated cell competition. Although the chimeric skin contains allogenic dermis, it is engraftable as long as autologous grafts. Furthermore, we could generate semi-humanized skin segments by human keratinocytes injection into the amnionic cavity of p63 knockout mice embryos. Niche encroachment opens the possibility of human skin graft production in livestock animals.

Intraoperative bioprinting of human adipose-derived stem cells and extra-cellular matrix induces hair follicle-like downgrowths and adipose tissue formation during full-thickness craniomaxillofacial skin reconstruction

Craniomaxillofacial (CMF) reconstruction is a challenging clinical dilemma. It often necessitates skin replacement in the form of autologous graft or flap surgery, which differ from one another based on hypodermal/dermal content. Unfortunately, both approaches are plagued by scarring, poor cosmesis, inadequate restoration of native anatomy and hair, alopecia, donor site morbidity, and potential for failure. Therefore, new reconstructive approaches are warranted, and tissue engineered skin represents an exciting alternative. In this study, we demonstrated the reconstruction of CMF full-thickness skin defects using intraoperative bioprinting (IOB), which enabled the repair of defects via direct bioprinting of multiple layers of skin on immunodeficient rats in a surgical setting. Using a newly formulated patient-sourced allogenic bioink consisting of both human adipose-derived extracellular matrix (adECM) and stem cells (ADSCs), skin loss was reconstructed by precise deposition of the hypodermal and dermal components under three different sets of animal studies. adECM, even at a very low concentration such as 2 % or less, has shown to be bioprintable via droplet-based bioprinting and exhibited de novo adipogenic capabilities both in vitro and in vivo. Our findings demonstrate that the combinatorial delivery of adECM and ADSCs facilitated the reconstruction of three full-thickness skin defects, accomplishing near-complete wound closure within two weeks. More importantly, both hypodermal adipogenesis and downgrowth of hair follicle-like structures were achieved in this two-week time frame. Our approach illustrates the translational potential of using human-derived materials and IOB technologies for full-thickness skin loss.

Characterization and biocompatibility evaluation of acellular rat skin scaffolds for skin tissue engineering applications

Utilization of acellular scaffolds, extracellular matrix (ECM) without cell content, is growing in tissue engineering, due to their high biocompatibility, bioactivity ad mechanical support. Hence, the purpose of this research was to study the characteristics and biocompatibility of decellularized rat skin scaffolds using the osmotic shock method. First, the skin of male Wistar rats was harvested and cut into 1 × 1 cm2 pieces. Then, some of the harvested parts were subjected to the decellularization process by applying osmotic shock. Comparison of control and scaffold samples was conducted in order to assure cell elimination and ECM conservation by means of histological evaluations, quantification of biochemical factors, measurement of DNA amount, and photographing the ultrastructure of the samples by scanning electron microscopy (SEM). In order to evaluate stem cell viability and adhesion to the scaffold, adipose-derived mesenchymal stem cells (AD-MSCs) were seeded on the acellular scaffolds. Subsequently, MTT test and SEM imaging of the scaffolds containing cultured cells were applied. The findings indicated that in the decellularized scaffolds prepared by osmotic shock method, not only the cell content was removed, but also the ECM components and its ultrastructure were preserved. Also, the 99% viability and adhesion of AD-MSCs cultured on the scaffolds indicate the biocompatibility of the decellularized skin scaffold. In conclusion, decellularized rat skin scaffolds are biocompatible and appropriate scaffolds for future investigations of tissue engineering applications.

Early identification of delayed wound healing in complex diabetic foot ulcers treated with a dermal regeneration template: a novel clinical target and its risk factors

BACKGROUND

The dermal regeneration template (DRT), a tissue-engineered skin substitute composing a permanent dermal matrix and an upper temporary silicone layer that serves as the epidermis, has demonstrated efficacy in treating uncomplicated diabetic foot ulcers (DFUs). Our institution has obtained good outcomes with DRT in patients with more complicated DFUs. Because of its chronicity, the authors are working to identify a clinical target that anticipates delayed healing early in the treatment in addition to determining the risk factors linked to this endpoint to increase prevention.

MATERIALS AND METHODS

This retrospective single-center study analyzed patients with DFUs who underwent wound reconstruction using DRT between 2016 and 2021. The patients were categorized into poor or good graft-take groups based on their DRT status on the 21st day after the application. Their relationship with complete healing (CH) rate at day 180 was analyzed. Variables were collected for risk factors for poor graft take at day 21. Independent risk factors were identified after multivariable analysis. The causes of poor graft take were also reported.

RESULTS

This study examined 80 patients (38 and 42 patients in the poor and good graft-take groups, respectively). On day 180, the CH rate was 86.3% overall, but the poor graft-take group had a significantly lower CH rate (76.3 vs. 95.2%, P =0.021) than the good graft-take group. Our analysis identified four independent risk factors: transcutaneous oxygen pressure less than 30 mmHg (odds ratio, 154.14), off-loading device usage (0.03), diabetic neuropathy (6.51), and toe wound (0.20). The most frequent cause of poor graft take was infection (44.7%), followed by vascular compromise (21.1%) and hematoma (15.8%).

CONCLUSION

Our study introduces the novel concept of poor graft take at day 21 associated with delayed wound healing. Four independent risk factors were identified, which allows physicians to arrange interventions to mitigate their effects or select patients more precisely. DRT represents a viable alternative to address DFUs, even in complicated wounds. A subsequent split-thickness skin graft is not always necessary to achieve CH.

Aloe vera-based biomaterial ink for 3D bioprinting of wound dressing constructs

This study emphasizes the development of a multifunctional biomaterial ink for wound healing constructs. The biomaterial ink benefits from Aloe vera's intrinsic biocompatible, biodegradable, antioxidant, antimicrobial, anti-inflammatory, and immunomodulatory attributes, thus alleviating the need for supplementary substances employed to combat infections and stimulate tissue regeneration. Moreover, this biomaterial ink seeks to address the scarcity of standardized printable materials possessing adequate biocompatibility and physicochemical properties, which hinder its widespread clinical adoption. The biomaterial ink was synthesized via ionic crosslinking to enhance its rheological and mechanical characteristics. The findings revealed that Aloe vera substantially boosted the hydrogel's viscoelastic behavior, enabling superior compressive modulus and the extrusion of fine filaments. The bioprinted constructs exhibited desirable resolution and mechanical strength while displaying a porous microstructure analogous to the native extracellular matrix. Biological response demonstrated no detrimental impact on stem cell viability upon exposure to the biomaterial ink, as confirmed by live/dead assays. These outcomes validate the potential of the developed biomaterial ink as a resource for the bioprinting of wound dressings that effectively foster cellular proliferation, thereby promoting enhanced wound healing by leveraging Aloe vera's inherent properties.

Fish By-Product Collagen Extraction Using Different Methods and Their Application

The processing of fishery resources results in the production of a growing quantity of byproducts, including heads, skins, viscera, intestines, frames, and fillet cutoffs. These byproducts are either wasted or utilized for the production of low-value items and fish oil. Typically, fish processing industries use only 25%, while the remaining 75% is considered as waste by-products. This review presents a comprehensive review on the extraction of collagen from fish byproducts, highlighting numerous techniques including acid-soluble collagen (ASC), enzyme-soluble collagen (ESC), ultrasound extraction, deep eutectic solvent (DES) extraction, and supercritical fluid extraction (SFE). A detailed explanation of various extraction parameters such as time, temperature, solid to liquid (S/L) ratio, and solvent/pepsin concentration is provided, which needs to be considered to optimize the collagen yield. Moreover, this review extends its focus to a detailed investigation of fish collagen applications in the biomedical sector, food sector, and in cosmetics. The comprehensive review explaining the extraction methods, extraction parameters, and the diverse applications of fish collagen provides a basis for the complete understanding of the potential of fish-derived collagen. The review concludes with a discussion of the current research and a perspective on the future development in this research field.

Objective Non-Invasive Bio-Parametric Evaluation of Regenerated Skin: A Comparison of Two Acellular Dermal Substitutes

Several dermal substitutes are available on the market, but there is no precise indication that helps surgeons choose the proper one. Few studies have tried to compare different xenogeneic bioengineered products, but no objective bio-parametric comparison has been made yet. Fifteen patients who underwent skin reconstruction with Integra® or Pelnac® were retrospectively evaluated. After at least 12 months of follow-up, an objective and quantitative assessment of several skin biophysical properties, such as color, texture, elasticity, hydration, glossiness and trans-epidermal water loss, were measured with non-invasive skin measurement devices. The grafted skin showed a reduction of the superficial hydration level and a tendency to lower values of trans-epidermal water loss with both dermal substitutes. Melanic and hemoglobin pigmentation were higher in comparison to the donor site in both groups, while a melanic pigmentation increase versus the surrounding skin was seen just with Integra®. Finally, the skin was found to be more elastic when reconstructed with Integra®. The skin barrier appeared to be intact in both groups. Hence, these substitutes are valuable means of skin regeneration. Integra® seems to be more advantageous for reconstructing areas that need more skin flexibility.

Development of a membrane and a bilayer of chitosan, gelatin, and polyhydroxybutyrate to be used as wound dressing for the regeneration of rat excisional wounds

The skin is the largest organ in the human body that acts as a protective barrier from the outside environment. Certain dermatological pathologies or significant skin lesions can result in serious complications. Several studies have focused on the development of tissue-engineered skin substitutes. In this study, a new bilayer scaffold composed of a chitosan-gelatin membrane and a chitosan-polyhydroxybutyrate (PHB) porous matrix was synthesized and populated with human adipose-derived mesenchymal stem cells (hASCs) to be potentially used for wound dressing applications. By combining this membrane and porous matrix with the stem cells, we aimed to provide immunomodulation and differentiation capabilities for the wound environment, as well as mechanical strength and biocompatibility for the underlying tissue. The membrane was prepared from the mixture of chitosan and gelatin in a 2:1 ratio and the porous matrix was prepared from the mixture of chitosan and PHB, in equal proportions to form a final solution at 2.5% (m/v). Fourier transform infrared spectroscopy analysis showed the formation of blends, and micro-computed tomography, scanning electron microscopy and atomic force microscopy images demonstrated membrane roughness and matrix porosity. The MTT assay showed that the scaffolds were biocompatible with hASC. The membrane and the bilayer were used as dressing and support for cell migration in the dorsal excisional wound model in Wistar rats. Histological and gene transcriptional analyses showed that the animals that received the scaffolds regenerated the hair follicles in the deep dermis in the central region of the wound. Our results demonstrate the potential of these new biomaterials as dressings in wound healing studies, favoring tissue regeneration.

A novel multifunctional chitosan-gelatin/carboxymethyl cellulose-alginate bilayer hydrogel containing human placenta extract for accelerating full-thickness wound healing

The replication of skin's dermal and epidermal morphology within a full-thickness wound using a bi-layer hydrogel to cater to their distinct needs is a compelling pursuit. Moreover, human placenta extract (HPE), containing a diverse array of bioactive agents, has proven to be effective in promoting the wound healing process and enhancing epidermal keratinocytes. This study presents a multifunctional bi-layer hydrogel incorporating HPE for accelerating full-thickness wound healing through sustained HPE release, inhibition of bacteria invasion, and promotion of cell proliferation. The upper layer of the scaffold, known as the dressing layer, is composed of carboxymethyl cellulose and sodium alginate, serving as a supportive layer for cell proliferation. The under layer, referred to as the regenerative layer, is composed of chitosan and gelatin, providing an extracellular matrix-like, porous, moist, and antibacterial environment for cell growth. The scaffold was optimized to replicate the morphology of the dermal and epidermal layers, with suitable fibroblast infiltration and a pore size of approximately 283μm. Furthermore, the degradation rate of the samples matched the wound healing rate and persisted throughout this period. The sustained HPE release rate, facilitated by the degradation rate, was optimized to reach ~98% after 28 days, covering the entire healing period. The samples demonstrated robust antibacterial capabilities, with bacterial inhibition zone diameters of and 2.63±0.12cm for S. aureus and E. coli, respectively. The biocompatibility of the samples remained at approximately 68.33±4.5% after 21 days of fibroblast cell culture. The in vivo experiment indicated that the HPE@Bilayer hydrogel promotes the formation of new blood vessels and fibroblasts during the early stages of healing, leading to the appropriate formation of granulation tissue and a wound contraction rate of (79.31±3.1)%. Additionally, it resulted in the formation of a thick epidermal layer (keratinization) that effectively covered all the impaired areas, achieving a wound contraction rate of 95.83±6.3% at the late stage of wound healing. Furthermore, immunohistochemistry staining for CD31 and TGF-β revealed that the HPE@Bilayer group had 22 blood vessels/field and 34%-66% immunoactive cells, respectively, after 14 days of healing. However, by day 21, angiogenesis and TGF-β expression had declined, demonstrating that the wounds had been successfully treated with minimal scarring.

Fabrication and Characterization of an Electro-Compacted Collagen/Elastin/Hyaluronic Acid Sheet as a Potential Skin Scaffold

The development of biomimetic structures with integrated extracellular matrix (ECM) components represents a promising approach to biomaterial fabrication. Here, an artificial ECM, comprising the structural protein collagen I and elastin (ELN), as well as the glycosaminoglycan hyaluronan (HA), is reported. Specifically, collagen and ELN are electrochemically aligned to mimic the compositional characteristics of the dermal matrix. HA is incorporated into the electro-compacted collagen-ELN matrices via adsorption and chemical immobilization, to give a final composition of collagen/ELN/HA of 7:2:1. This produces a final collagen/ELN/hyaluronic acid scaffold (CEH) that recapitulates the compositional feature of the native skin ECM. This study analyzes the effect of CEH composition on the cultivation of human dermal fibroblast cells (HDFs) and immortalized human keratinocytes (HaCaTs). It is shown that the CEH scaffold supports dermal regeneration by promoting HDFs proliferation, ECM deposition, and differentiation into myofibroblasts. The CEH scaffolds are also shown to support epidermis growth by supporting HaCaTs proliferation, differentiation, and stratification. A double-layered epidermal-dermal structure is constructed on the CEH scaffold, further demonstrating its ability in supporting skin cell function and skin regeneration.

On-Site Construction of a Full-Thickness Skin Equivalent with Endothelial Tube Networks via Multilayer Electrospinning for Wound Coverage

Novel full-thickness skin substitutes are of increasing interest due to the inherent limitations of current models lacking capillary networks. Herein, we developed a novel full-thickness skin tissue containing blood capillary networks through a layer-by-layer assembly approach using a handy electrospinning apparatus and evaluated its skin wound coverage potential in vivo. The average diameter and thickness of fabricated poly-ε-caprolactone-cellulose acetate scaffolds were easily tuned in the range of 474 ± 77-758 ± 113 nm and 9.43 ± 2.23-29.96 ± 5.78 μm by varying electrospinning distance and duration, as indicated by FE-SEM. Besides, keratinocytes exhibited homogeneous differentiation throughout the fibrous matrix prepared with electrospinning distance and duration of 9 cm and 1.5 min within five-layer (5L) epidermal tissues with thickness of 135-150 μm. Moreover, coculture of vascular endothelial cells, circulating fibrocytes, and fibroblasts within the 5L dermis displayed network formation in vitro, resulting in reduced inflammatory factor levels and enhanced integration with the host vasculature in vivo. Additionally, the skin equivalent grafts consisting of the epidermal layer, biomimetic basement membrane, and vascularized dermis layer with an elastic modulus of approximately 11.82 MPa exhibited accelerated wound closure effect indicative of re-epithelialization and neovascularization with long-term cell survival into the host, which was confirmed by wound-healing rate, bioluminescence imaging activity, and histological analysis. It is the first report of a full-thickness skin equivalent constructed using a battery-operated electrospinning apparatus, highlighting its tremendous potential in regenerative medicine.

Fabrication and evaluation of a bi-layered gelatin based scaffold with arrayed micro-pits for full-thickness skin construct

There is an unmet need for a reliable and reproducible method for incorporating hair follicle derived stem cells in tissue engineered skin models to reconstitute hair follicles. This study discloses a novel method for introducing hair follicle derived stem cells in microneedle embossed micro-pits of a bilayer skin equivalent fabricated from a gelatin based scaffold. The microneedles are hard and strong enough to penetrate the upper layer of the bilayer gelatin based scaffold that corresponds to the epidermis and permeates down to lower layer that corresponds to dermal layer. This strategic location will mimic the natural niche of hair follicle stem cells for picking up signals from both the epidermis and dermis. Hair follicle stem cells are trapped in to these micro-pits by vacuum assisted cell seeding. The bilayer system consists of two distinct electrospun layers in a single processing step, representing outer epidermal layer and inner dermal layer with hair follicle stem cells in embedded pits, resulting in the formation of a closed representation of a complete skin.

Delayed skin grafting protocol following Integra™ application for non-radiated scalp reconstruction for decreased wound depth and improved contour

The clinical use of Integra™ has expanded to include scalp reconstruction since its FDA approval in 1996. Integra™, or dermal regeneration template, can be utilized in patients who are elderly with multiple medical comorbidities. Well-established Integra™ techniques utilize skin grafting 1-2 weeks following evidence of template vascularity. Most studies show the time to graft placement as <30 days, with almost all <52 days. No single article proposes a time frame for applying STSG after neodermis regeneration. Therefore, we aimed to describe our protocol to define a time frame for delaying scalp reconstruction with STSG following dermal regeneration. Over the last several years, the senior author has utilized a delayed reconstruction with skin grafting method where-in Integra™ is applied to either debrided bone or exposed pericranium in selected patients, and allowed to mature for ~6 weeks before performing skin grafting. The results have been predictable, reproducible, and have yielded high levels of patient and provider satisfaction due to the improved contour cosmesis. In this pictorial essay, the authors' novel protocol is detailed.

Computational investigation of a 3D-printed skin substitute with orthotropy in mechanical property

As a promising treatment for third-degree burns, grafting with bioengineering skin substitutes shows a capability to overcome the deficiency of donor skin. Similar mechanical properties with human skin are required for employed skin substitutes to avoid secondary damage to patients. Given the representativeness of orthotropy in mechanical properties, there is a need for developing orthotropic skin substitutes. This paper presents computational investigation as well as structural design for the fabrication of orthotropic skin substitutes. A finite element method (FEM) based mechanics simulation model for analyzing the stress field in the skin substitute was developed, by which the stress distribution in mimetic structures of the epidermis and dermis can be acquired. Moreover, the equation of Young's modulus was deduced based on the simulation result, which expressed the mechanical property of designed skin substitutes. Furthermore, several structures of skin substitutes were proposed and their calculated Young's modulus ranged from 21.87 kPa to 213.32 kPa, which was similar to the human skin. Ultimately, uniaxial tensile tests were performed for three types of 3D-printed orthotropic skin substitutes, which validates the feasibility to regulate Young's modulus by regulating the structure of fabricated skin substitutes.

Intraoperative Bioprinting of Human Adipose-derived Stem cells and Extra-cellular Matrix Induces Hair Follicle-Like Downgrowths and Adipose Tissue Formation during Full-thickness Craniomaxillofacial Skin Reconstruction

Craniomaxillofacial (CMF) reconstruction is a challenging clinical dilemma. It often necessitates skin replacement in the form of autologous graft or flap surgery, which differ from one another based on hypodermal/dermal content. Unfortunately, both approaches are plagued by scarring, poor cosmesis, inadequate restoration of native anatomy and hair, alopecia, donor site morbidity, and potential for failure. Therefore, new reconstructive approaches are warranted, and tissue engineered skin represents an exciting alternative. In this study, we demonstrated the reconstruction of CMF full-thickness skin defects using intraoperative bioprinting (IOB), which enabled the repair of defects via direct bioprinting of multiple layers of skin on immunodeficient rats in a surgical setting. Using a newly formulated patient-sourced allogenic bioink consisting of both human adipose-derived extracellular matrix (adECM) and stem cells (ADSCs), skin loss was reconstructed by precise deposition of the hypodermal and dermal components under three different sets of animal studies. adECM, even at a very low concentration such as 2% or less, has shown to be bioprintable via droplet-based bioprinting and exhibited de novo adipogenic capabilities both in vitro and in vivo . Our findings demonstrate that the combinatorial delivery of adECM and ADSCs facilitated the reconstruction of three full-thickness skin defects, accomplishing near-complete wound closure within two weeks. More importantly, both hypodermal adipogenesis and downgrowth of hair follicle-like structures were achieved in this two-week time frame. Our approach illustrates the translational potential of using human-derived materials and IOB technologies for full-thickness skin loss.

Successful reconstruction of full-thickness skin defects in a swine model using simultaneous split-thickness skin grafting and composite collagen microstructured dermal scaffolds

Reconstitution of normal skin anatomy after full-thickness skin loss may be accomplished using a combination of a dermal regeneration template (DRT) and a split thickness skin graft (STSG). However, because of the relatively low rate of cell infiltration and vascularisation of currently available DRTs, reconstruction is almost always performed in a two-step procedure over the course of several weeks, resulting in multiple dressing changes, prolonged immobilisation and increased chance of infection. To mitigate the potential complications of this prolonged process, the collagen-based dermal template DermiSphere™ was developed and tested in a single-step procedure wherein DermiSphere and STSG were implanted simultaneously. When evaluated in a porcine, full thickness, excisional wound model, DermiSphere successfully supported simultaneous split thickness skin graft take and induced functional neodermal tissue deposition. When compared to a market leading product Integra Bilayer Wound Matrix, which was used in a multistep procedure (STSG placed 14 days after product implantation according to the product IFU), DermiSphere induced a similar moderate and transient inflammatory response that produced similar neodermal tissue maturity, thickness and vascularity, despite being implanted in a single surgical procedure leading to wound closure 2 weeks earlier. These data suggest that DermiSphere may be implanted in a single-step procedure with an STSG, which would significantly shorten the time course required for the reconstruction of both dermal and epidermal components of skin after full thickness loss.

Chitosan and its derivatives in 3D/4D (bio) printing for tissue engineering and drug delivery applications

Tissue engineering research has undergone to a revolutionary improvement, thanks to technological advancements, such as the introduction of bioprinting technologies. The ability to develop suitable customized biomaterial inks/bioinks, with excellent printability and ability to promote cell proliferation and function, has a deep impact on such improvements. In this context, printing inks based on chitosan and its derivatives have been instrumental. Thus, the current review aims at providing a comprehensive overview on chitosan-based materials as suitable inks for 3D/4D (bio)printing and their applicability in creating advanced drug delivery platforms and tissue engineered constructs. Furthermore, relevant strategies to improve the mechanical and biological performances of this biomaterial are also highlighted.

Polymeric biomaterials for wound healing

Skin indicates a person's state of health and is so important that it influences a person's emotional and psychological behavior. In this context, the effective treatment of wounds is a major concern, since several conventional wound healing materials have not been able to provide adequate healing, often leading to scar formation. Hence, the development of innovative biomaterials for wound healing is essential. Natural and synthetic polymers are used extensively for wound dressings and scaffold production. Both natural and synthetic polymers have beneficial properties and limitations, so they are often used in combination to overcome overcome their individual limitations. The use of different polymers in the production of biomaterials has proven to be a promising alternative for the treatment of wounds, as their capacity to accelerate the healing process has been demonstrated in many studies. Thus, this work focuses on describing several currently commercially available solutions used for the management of skin wounds, such as polymeric biomaterials for skin substitutes. New directions, strategies, and innovative technologies for the design of polymeric biomaterials are also addressed, providing solutions for deep burns, personalized care and faster healing.

Fabrication, Physical-Chemical and Biological Characterization of Retinol-Loaded Poly(vinyl Alcohol) Electrospun Fiber Mats for Wound Healing Applications

Nowadays, there exists a huge interest in producing innovative, high-performance, biofunctional, and cost-efficient electrospun biomaterials based on the association of biocompatible polymers with bioactive molecules. Such materials are well-known to be promising candidates for three-dimensional biomimetic systems for wound healing applications because they can mimic the native skin microenvironment; however, many open questions such as the interaction mechanism between the skin and the wound dressing material remain unclear. Recently, several biomolecules were intended for use in combination with poly(vinyl alcohol) (PVA) fiber mats to improve their biological response; nevertheless, retinol, an important biomolecule, has not been combined yet with PVA to produce tailored and biofunctional fiber mats. Based on the abovementioned concept, the present work reported the fabrication of retinol-loaded PVA electrospun fiber mats (RPFM) with a variable content of retinol (0 ≤ Ret ≤ 25 wt.%), and their physical-chemical and biological characterization. SEM results showed that fiber mats exhibited diameters distribution ranging from 150 to 225 nm and their mechanical properties were affected with the increasing of retinol concentrations. In addition, fiber mats were able to release up to 87% of the retinol depending on both the time and the initial content of retinol. The cell culture results using primary mesenchymal stem cell cultures proved the biocompatibility of RPFM as confirmed by their effects on cytotoxicity (low level) and proliferation (high rate) in a dose-dependent manner. Moreover, the wound healing assay suggested that the optimal RPFM with retinol content of 6.25 wt.% (RPFM-1) enhanced the cell migratory activity without altering its morphology. Accordingly, it is demonstrated that the fabricated RPFM with retinol content below the threshold 0 ≤ Ret ≤ 6.25 wt.% would be an appropriate system for skin regenerative application.

The Use of Hydrogel Dressings in Sulfur Mustard-Induced Skin and Ocular Wound Management

Over one century after its first military use on the battlefield, sulfur mustard (SM) remains a threatening agent. Due to the absence of an antidote and specific treatment, the management of SM-induced lesions, particularly on the skin and eyes, still represents a challenge. Current therapeutic management is mainly limited to symptomatic and supportive care, pain relief, and prevention of infectious complications. New strategies are needed to accelerate healing and optimize the repair of the function and appearance of damaged tissues. Hydrogels have been shown to be suitable for healing severe burn wounds. Because the same gravity of lesions is observed in SM victims, hydrogels could be relevant dressings to improve wound healing of SM-induced skin and ocular injuries. In this article, we review how hydrogel dressings may be beneficial for improving the wound healing of SM-induced injuries, with special emphasis placed on their suitability as drug delivery devices on SM-induced skin and ocular lesions.

Autologous Skin Grafts, versus Tissue-engineered Skin Constructs: A Systematic Review and Meta-analysis

For over 100 years, autologous skin grafts have remained the gold standard for the reconstruction of wounds but are limited in availability. Acellular tissue-engineered skin constructs (acellular TCs) and cellular tissue-engineered skin constructs (cellular TCs) may address these limitations. This systematic review and meta-analysis compare outcomes between them.

Methods

A systematic review was conducted using PRISMA guidelines, querying MEDLINE, Embase, Web of Science, and Cochrane to assess graft incorporation, failure, and wound healing. Case reports/series, reviews, in vitro/in vivo work, non-English articles or articles without full text were excluded.

Results

Sixty-six articles encompassing 4076 patients were included. No significant differences were found between graft failure rates (P = 0.07) and mean difference of percent reepithelialization (p = 0.92) when split-thickness skin grafts were applied alone versus co-grafted with acellular TCs. Similar mean Vancouver Scar Scale was found for these two groups (p = 0.09). Twenty-one studies used at least one cellular TC. Weighted averages from pooled results did not reveal statistically significant differences in mean reepithelialization or failure rates for epidermal cellular TCs compared with split-thickness skin grafts (p = 0.55).

Conclusions

This systematic review is the first to illustrate comparable functional and wound healing outcomes between split-thickness skin grafts alone and those co-grafted with acellular TCs. The use of cellular TCs seems promising from preliminary findings. However, these results are limited in clinical applicability due to the heterogeneity of study data, and further level 1 evidence is required to determine the safety and efficacy of these constructs.

Burn Scar Management and Reconstructive Surgery

This chapter highlights the importance of a comprehensive burn scar treatment plan in approaching a burn survivor. General concepts of burn scar physiology and a practical system to describe burn scars based on cause, biology, and symptoms are presented. Common scar management modalities including nonsurgical, surgical, and adjuvant therapies are further discussed.

Functionalised-biomatrix for wound healing and cutaneous regeneration: future impactful medical products in clinical translation and precision medicine

Skin tissue engineering possesses great promise in providing successful wound injury and tissue loss treatments that current methods cannot treat or achieve a satisfactory clinical outcome. A major field direction is exploring bioscaffolds with multifunctional properties to enhance biological performance and expedite complex skin tissue regeneration. Multifunctional bioscaffolds are three-dimensional (3D) constructs manufactured from natural and synthetic biomaterials using cutting-edge tissue fabrication techniques incorporated with cells, growth factors, secretomes, antibacterial compounds, and bioactive molecules. It offers a physical, chemical, and biological environment with a biomimetic framework to direct cells toward higher-order tissue regeneration during wound healing. Multifunctional bioscaffolds are a promising possibility for skin regeneration because of the variety of structures they provide and the capacity to customise the chemistry of their surfaces, which allows for the regulated distribution of bioactive chemicals or cells. Meanwhile, the current gap is through advanced fabrication techniques such as computational designing, electrospinning, and 3D bioprinting to fabricate multifunctional scaffolds with long-term safety. This review stipulates the wound healing processes used by commercially available engineered skin replacements (ESS), highlighting the demand for a multifunctional, and next-generation ESS replacement as the goals and significance study in tissue engineering and regenerative medicine (TERM). This work also scrutinise the use of multifunctional bioscaffolds in wound healing applications, demonstrating successful biological performance in the in vitro and in vivo animal models. Further, we also provided a comprehensive review in requiring new viewpoints and technological innovations for the clinical application of multifunctional bioscaffolds for wound healing that have been found in the literature in the last 5 years.

Highly Elastic and Strain Sensing Corn Protein Electrospun Fibers for Monitoring of Wound Healing

Due to the lack of sufficient elasticity and strain sensing capability, protein-based ultrafine fibrous tissue engineering scaffolds, though favorable for skin repair, can hardly fulfill on-spot wound monitoring during healing. Herein, we designed highly elastic corn protein ultrafine fibrous smart scaffolds with a three-layer structure for motion tracking at an unpackaged state. The densely cross-linked protein networks were efficiently established by introducing a highly reactive epoxy and provided the fiber substrates with wide-range stretchability (360% stretching range) and ultrahigh elasticity (99.91% recovery rate) at a wet state. With the assistance of the polydopamine bonding layer, a silver conductive sensing layer was built on the protein fibers and endowed the scaffolds with wide strain sensing range (264%), high sensitivity (gauge factor up to 210.55), short response time (<70 ms), reliable cycling stability, and long-lasting duration (up to 30 days). The unpackaged smart scaffolds could not only support cell growth and accelerate wound closure but also track motions on skin and in vivo and trigger alarms once excessive wound deformations occurred. These features not only confirmed the great potential of these smart scaffolds for applications in tissue reconstruction and wound monitoring but also proved the possibility of employing various plant protein ultrafine fibers as flexible bioelectronics.

Embryonic Stem Cells Can Generate Oral Epithelia under Matrix Instruction

We aimed to investigate whether molecular clues from the extracellular matrix (ECM) can induce oral epithelial differentiation of pluripotent stem cells. Mouse embryonic stem cells (ESC) of the feeder-independent cell line E14 were used as a model for pluripotent stem cells. They were first grown in 2D on various matrices in media containing vitamin C and without leukemia inhibitory factor (LIF). Matrices investigated were gelatin, laminin, and extracellular matrices (ECM) synthesized by primary normal oral fibroblasts and keratinocytes in culture. Differentiation into epithelial lineages was assessed by light microscopy, immunocytochemistry, and flow cytometry for cytokeratins and stem cell markers. ESC grown in 2D on various matrices were afterwards grown in 3D organotypic cultures with or without oral fibroblasts in the collagen matrix and examined histologically and by immunohistochemistry for epithelial (keratin pairs 1/10 and 4/13 to distinguish epidermal from oral epithelia and keratins 8,18,19 to phenotype simple epithelia) and mesenchymal (vimentin) phenotypes. ECM synthesized by either oral fibroblasts or keratinocytes was able to induce, in 2D cultures, the expression of cytokeratins of the stratified epithelial phenotype. When grown in 3D, all ESC developed into two morphologically distinct cell populations on collagen gels: (i) epithelial-like cells organized in islands with occasional cyst- or duct-like structures and (ii) spindle-shaped cells suggestive of mesenchymal differentiation. The 3D culture on oral fibroblast-populated collagen matrices was necessary for further differentiation into oral epithelia. Only ESC initially grown on 2D keratinocyte or fibroblast-synthesized matrices reached full epithelial maturation. In conclusion, ESC can generate oral epithelia under matrix instruction.

Preclinical study models of psoriasis: State-of-the-art techniques for testing pharmaceutical products in animal and nonanimal models

Local and systemic treatments exist for psoriasis, but none can do more than control its symptoms because of its numerous unknown mechanisms. The lack of validated testing models or a defined psoriatic phenotypic profile hinders antipsoriatic drug development. Despite their intricacy, immune-mediated diseases have no improved and precise treatment. The treatment actions may now be predicted for psoriasis and other chronic hyperproliferative skin illnesses using animal models. Their findings confirmed that a psoriasis animal model could mimic a few disease conditions. However, their ethical approval concerns and inability to resemble human psoriasis rightly offer to look for more alternatives. Hence, in this article, we have reported various cutting-edge techniques for the preclinical testing of pharmaceutical products for the treatment of psoriasis.

Chitosan/silk fibroin/nitrogen-doped carbon quantum dot/α-tricalcium phosphate nanocomposite electrospinned as a scaffold for wound healing application: In vitro and in vivo studies

A highly porous nanofibrous network that can functionalize antibacterial and therapeutic agents can be considered a suitable option for skin wound healing. In this study, α-tricalcium phosphate (α-TCP)/nitrogen-doped carbon quantum dots (N-CQDs) nanocomposite was synthesized and then applied to the fabrication of novel chitosan (CS)/silk fibroin (SF)/N-CQDs/α-TCP wound dressing via electrospinning system. The prepared nanomaterials were well characterized using X-ray diffraction, Fourier-transform infrared, scanning and transmission electron microscopes analyses, and antibacterial assay. Furthermore, nanofibers were evaluated regarding their physical properties, such as tensile behavior, water uptake capacity, and water contact angle. The results reveal that CS/SF/N-CQDs/α-TCP showed lower MIC values against E. coli and S. aureus (1.45 ± 0.26 mg/mL and 1.59 ± 0.12 mg/mL) compared to other synthesized materials. Also, in-vitro investigations were performed, and the MTT assay on the HFF cell line revealed that CS/SF/N-CQDs/α-TCP nanofiber could possess good biocompatibility. Interestingly, the scratch test proved that faster cell migration and proliferation occurred in the presence of CS/SF/N-CQDs/α-TCP (73 ± 3.12 %). Finally, we examined the wound healing ability of CS/SF/N-CQDs/α-TCP nanofiber using an animal model. The results confirmed that produced nanofiber could efficiently promote wound closure by 96.73 ± 1.25 % in 12 days. Histopathological analyses verified accelerated re-epithelization and well-structured epidermis in CS/SF/N-CQDs/α-TCP nanofiber-treated group. Based on our findings, the CS/SF/N-CQDs/α-TCP nanofiber with excellent antimicrobial properties is highly suitable for wound healing and skin tissue regeneration applications.

Biodegradable temporising matrix: use of negative pressure wound therapy shows a significantly higher success rate

OBJECTIVE

The purpose of this case series was to evaluate the efficacy of a synthetic biodegradable temporising matrix (BTM; PolyNovo Biomaterials Pty Ltd, Australia) and compare the outcome of BTM patients with and without negative pressure wound therapy (NPWT).

METHOD

A retrospective chart review was conducted on patients admitted with deep full-thickness burns, traumatic or complex wound injuries treated with BTM. Electronic medical records and images were evaluated by a team of clinical professionals. Endpoints included: the measure of successful BTM integration; and comparison between patients treated with and without NPWT. Additional measures were BTM total surface area, BTM sites, timeliness of BTM application and any complications.

RESULTS

A total of 28 patients were evaluated and 23 (82.1%) demonstrated overall successful BTM integration. Patients treated with BTM in conjunction with NPWT (n=16) demonstrated a significantly higher (p=0.046) integration rate compared to patients treated without NPWT (n=12) (93.8% versus 58.3%, respectively). Patients treated with BTM with NPWT continued to successfully integrate and sustain favourable outcomes despite the presence of severe infection or the development of haematomas.

CONCLUSION

A significantly higher integration rate was demonstrated when BTM was used in conjunction with NPWT. The results of this study further support the efficacy of successful integration of BTM as a replacement for tissue loss in the treatment of deep, full-thickness burns, traumatic and complex wound injuries, and particularly favourable outcomes with the use of NPWT. To the best of our knowledge, this is the first reported case series comparing the clinical outcomes of BTM with and without the use of NPWT.

FEATURES OF QUALITY CONTROL STRATEGY FOR DRUGS BASED ON VIABLE SKIN CELLS

The aim of the study was to research the international experience in quality assurance of the products based on skin cells in order to identify the features of the quality control strategy in the development, production, as well as during an expert quality assessment as a part of the state registration procedure in the Russian Federation.

Materials and methods. The article provides an analysis of the materials presented in the assessment reports of the USA and Japanese regulatory authorities, as well as on the official websites of manufacturers, in review and scientific papers on the study of the structure and properties of tissue-engineered skin analogs.

Results. The manufacture of products containing human skin cells is associated with such risks as the possibility of contamination of the preparation with infective agents transmitted by materials of the animal origin, feeder cells, donor cells, or during the manufacturing process; a small amount of biopsy materials; a complexity of a three-dimensional product structure when combining cells with a scaffold; continuity of the manufacture process and a short product expiry date. The raw materials and reagents control, the creation of cell banks, using animal feeder cells only from qualified cell banks, an in-process control and release testing in accordance with the requirements of the finished product specification, make it possible to obtain a preparation with a reproducible quality. The specification should contain information about the identity, safety and potency of the product. For each preparation, the choice of approaches for assessing the quality is individual and depends on its composition and mode of action.

Conclusion. The features of the quality control strategy for the drugs based on human skin cells, consist in the implementation of control measures in order to obtain a proper quality of cellular (viability, sterility, identity, potency, et al) and non-cellular (physico-chemical scaffold properties) components or the whole graft (bioburden, barrier properties). The approaches and methods for determining the potency should be selected individually for each product and reflect the number, viability and identity of cells, a proliferative activity and secretable ability of the cellular component.

Immunomodulatory Biomaterials and Emerging Analytical Techniques for Probing the Immune Micro-Environment

After implantation of a biomaterial, both the host immune system and properties of the material determine the local immune response. Through triggering or modulating the local immune response, materials can be designed towards a desired direction of promoting tissue repair or regeneration. High-throughput sequencing technologies such as single-cell RNA sequencing (scRNA-seq) emerging as a powerful tool for dissecting the immune micro-environment around biomaterials, have not been fully utilized in the field of soft tissue regeneration. In this review, we first discussed the procedures of foreign body reaction in brief. Then, we summarized the influences that physical and chemical modulation of biomaterials have on cell behaviors in the micro-environment. Finally, we discussed the application of scRNA-seq in probing the scaffold immune micro-environment and provided some reference to designing immunomodulatory biomaterials. The foreign body response consists of a series of biological reactions. Immunomodulatory materials regulate immune cell activation and polarization, mediate divergent local immune micro-environments and possess different tissue engineering functions. The manipulation of physical and chemical properties of scaffolds can modulate local immune responses, resulting in different outcomes of fibrosis or tissue regeneration. With the advancement of technology, emerging techniques such as scRNA-seq provide an unprecedented understanding of immune cell heterogeneity and plasticity in a scaffold-induced immune micro-environment at high resolution. The in-depth understanding of the interaction between scaffolds and the host immune system helps to provide clues for the design of biomaterials to optimize regeneration and promote a pro-regenerative local immune micro-environment.

The effect of source animal age, decellularization protocol, and sterilization method on bovine acellular dermal matrix as a scaffold for wound healing and skin regeneration

BACKGROUND

Healing the full-thickness skin wounds has remained a challenge. One of the most frequently used grafts for skin regeneration is xenogeneic acellular dermal matrices (ADMs), including bovine ADMs. This study investigated the effect of the source animal age, enzymatic versus non-enzymatic decellularization protocols, and gamma irradiation versus ethylene oxide (EO) sterilization on the scaffold.

METHODS

ADMs were prepared using the dermises of fetal bovine or calf skins. All groups were decellularized through chemical and mechanical methods, unless T-FADM samples, in which an enzymatic step was added to the decellularization protocol. All groups were sterilized with ethylene oxide (EO), except G-FADM which was sterilized using gamma irradiation. The scaffolds were characterized through scanning electron microscopy, differential scanning calorimetry, tensile test, MTT assay, DNA quantification, and real-time PCR. The performance of the ADMs in wound treatment was also evaluated macroscopically and histologically.

RESULTS

All ADMs were effectively decellularized. In comparison to FADM (EO-sterilized fetal ADM), morphological, and mechanical properties of G-FADM, T-FADM, and CADM (EOsterilized calf ADM) were changed to different extents. In addition, the CADM and G-FADM were thermally more stable than the FADM and T-FADM. Although all ADMs were noncytotoxic, the wounds of the FADM, T-FADM, and G-FADM groups were contracted to almost 30.0% of the original area on day 7, significantly faster than the CADM (17.5% ± 1.7) and control (12.2% ± 1.59) groups. However, by day 21, all ADMs were mostly closed except for the untreated group (60.1 ± 1.8).

CONCLUSION

Altogether, fetal source and EO-sterilized samples performed better than calf source and gamma-sterilized samples unless in some mechanical properties. There was no added value in using enzymatic treatment during the decellularization process. Our results suggest that the age, decellularization, and sterilization methods of animal source should be selected based on the clinical requirements.

Biomaterials Based on Chitosan and Polyvinyl Alcohol as a Drug Delivery System with Wound-Healing Effects

The excellent biological properties of chitosan (CS) together with the increased oxygen permeability of polyvinyl alcohol (PVA) were the prerequisites for the creation of a wound healing dressing that would also function as a system for L-arginine (L-arg) and caffeine (Caff) delivery. Using the freezing/thawing method, 12 hydrogels were obtained in PVA:CS polymer ratios of 90:10, 75:25, and 60:40, and all were loaded with L-arg, Caff, and the mixture of L-arg and Caff, respectively. Afterwards, an inorganic material (zeolite-Z) was added to the best polymeric ratio (75:25) and loaded with active substances. The interactions between the constituents of the hydrogels were analyzed by FTIR spectroscopy, the uniformity of the network was highlighted by the SEM technique, and the dynamic water vapor sorption capacity was evaluated. In the presence of the inorganic material, the release profile of the active substances is delayed, and in vitro permeation kinetics proves that the equilibrium state is not reached even after four hours. The synergy of the constituents in the polymer network recommends that they be used in medical applications, such as wound healing dressings.

The rise of mechanical metamaterials: Auxetic constructs for skin wound healing

Auxetic materials are known for their unique ability to expand/contract in multiple directions when stretched/compressed. In other words, they exhibit a negative Poisson's ratio, which is usually positive for most of materials. This behavior appears in some biological tissues such as human skin, where it promotes wound healing by providing an enhanced mechanical support and facilitating cell migration. Skin tissue engineering has been a growing research topic in recent years, largely thanks to the rapid development of 3D printing techniques and technologies. The combination of computational studies with rapid manufacturing and tailored designs presents a huge potential for the future of personalized medicine. Overall, this review article provides a comprehensive overview of the current state of research on auxetic constructs for skin healing applications, highlighting the potential of auxetics as a promising treatment option for skin wounds. The article also identifies gaps in the current knowledge and suggests areas for future research. In particular, we discuss the designs, materials, manufacturing techniques, and also the computational and experimental studies on this topic.

3D bioprinting of an implantable xeno-free vascularized human skin graft

Bioengineered tissues or organs produced using matrix proteins or components derived from xenogeneic sources pose risks of allergic responses, immune rejection, or even autoimmunity. Here, we report successful xeno-free isolation, expansion, and cryopreservation of human endothelial cells (EC), fibroblasts (FBs), pericytes (PCs), and keratinocytes (KCs). We further demonstrate the bioprinting of a human skin substitute with a dermal layer containing xeno-free cultured human EC, FBs, and PCs in a xeno-free bioink containing human collagen type I and fibronectin layered in a biocompatible polyglycolic acid mesh and subsequently seeded with xeno-free human KCs to form an epidermal layer. Following implantation of such bilayered skin grafts on the dorsum of immunodeficient mice, KCs form a mature stratified epidermis with rete ridge-like structures. The ECs and PCs form human EC-lined perfused microvessels within 2 weeks after implantation, preventing graft necrosis, and eliciting further perfusion of the graft by angiogenic host microvessels. As proof-of-concept, we generated 12 individual grafts using a single donor of all four cell types. In summary, we describe the fabrication of a bioprinted vascularized bilayered skin substitute under completely xeno-free culture conditions demonstrating feasibility of a xeno-free approach to complex tissue engineering.

Comparison of biopolymer scaffolds for the fabrication of skin substitutes in a porcine wound model

This study compared three acellular scaffolds as templates for the fabrication of skin substitutes. A collagen-glycosaminoglycan (C-GAG), a biodegradable polyurethane foam (PUR) and a hybrid combination (PUR/C-GAG) were investigated. Scaffolds were prepared for cell inoculation. Fibroblasts and keratinocytes were serially inoculated onto the scaffolds and co-cultured for 14 days before transplantation. Three pigs each received four full-thickness 8 cm × 8 cm surgical wounds, into which a biodegradable temporising matrix (BTM) was implanted. Surface seals were removed after integration (28 days), and three laboratory-generated skin analogues and a control split-thickness skin graft (STSG) were applied for 16 weeks. Punch biopsies confirmed engraftment and re-epithelialisation. Biophysical wound parameters were also measured and analysed. All wounds showed greater than 80% epithelialisation by day 14 post-transplantation. The control STSG displayed 44% contraction over the 16 weeks, and the test scaffolds, C-GAG 64%, Hybrid 66.7% and PUR 67.8%. Immunohistochemistry confirmed positive epidermal keratins and basement membrane components (Integrin alpha-6, collagens IV and VII). Collagen deposition and fibre organisation indicated the degree of fibrosis and scar produced for each graft. All scaffold substitutes re-epithelialised by 4 weeks. The percentage of original wound area for the Hybrid and PUR was significantly different than the STSG and C-GAG, indicating the importance of scaffold retainment within the first 3 months post-transplant. The PUR/C-GAG scaffolds reduced the polymer pore size, assisting cell retention and reducing the contraction of in vitro collagen. Further investigation is required to ensure reproducibility and scale-up feasibility.

Accelerated vascularization of a novel collagen hydrogel dermal template

Full thickness skin loss is a debilitating problem, most commonly reconstructed using split thickness skin grafts (STSG), which do not reconstitute normal skin thickness and often result in suboptimal functional and esthetic outcomes that diminish a patient's quality of life. To address the minimal dermis present in most STSG, engineered dermal templates were developed that can induce tissue ingrowth and the formation of neodermal tissue. However, clinically available dermal templates have many shortcomings including a relatively slow rate and degree of neovascularization (∼2-4 weeks), resulting in multiple dressing changes, prolonged immobilization, and susceptibility to infection. Presented herein is a novel composite hydrogel scaffold that optimizes a unique scaffold microarchitecture with native hydrogel properties and mechanical cues ideal for promoting neovascularization, tissue regeneration, and wound healing. In vitro analysis demonstrated the unique combination of improved mechanical attributes with native hydrogel properties that promotes cell invasion and remodeling within the scaffold. In a novel 2-stage rat model of full thickness skin loss that closely mimics clinical practice, the composite hydrogel induced rapid cell infiltration and neovascularization, creating a healthy neodermis after only 1 week onto which a skin graft could be placed. The scaffold also elicited a gradual and favorable immune response, resulting in more efficient integration into the host. We have developed a dermal scaffold that utilizes simple but unique collagen hydrogel architectural cues that rapidly induces the formation of stable, functional neodermal tissue, which holds tremendous promise for the treatment of full thickness skin loss.

Organotypic cultures as aging associated disease models

Aging remains a primary risk factor for a host of diseases, including leading causes of death. Aging and associated diseases are inherently multifactorial, with numerous contributing factors and phenotypes at the molecular, cellular, tissue, and organismal scales. Despite the complexity of aging phenomena, models currently used in aging research possess limitations. Frequently used in vivo models often have important physiological differences, age at different rates, or are genetically engineered to match late disease phenotypes rather than early causes. Conversely, routinely used in vitro models lack the complex tissue-scale and systemic cues that are disrupted in aging. To fill in gaps between in vivo and traditional in vitro models, researchers have increasingly been turning to organotypic models, which provide increased physiological relevance with the accessibility and control of in vitro context. While powerful tools, the development of these models is a field of its own, and many aging researchers may be unaware of recent progress in organotypic models, or hesitant to include these models in their own work. In this review, we describe recent progress in tissue engineering applied to organotypic models, highlighting examples explicitly linked to aging and associated disease, as well as examples of models that are relevant to aging. We specifically highlight progress made in skin, gut, and skeletal muscle, and describe how recently demonstrated models have been used for aging studies or similar phenotypes. Throughout, this review emphasizes the accessibility of these models and aims to provide a resource for researchers seeking to leverage these powerful tools.

Preparation and Characterization of Nanofibrous Membranes Electro-Spun from Blended Poly(l-lactide-co-ε-caprolactone) and Recombinant Spider Silk Protein as Potential Skin Regeneration Scaffold

Biomaterial scaffolding serves as an important strategy in skin tissue engineering. In this research, recombinant spider silk protein (RSSP) and poly(L-lactide-co-ε-caprolactone) (PLCL) were blended in different ratios to fabricate nanofibrous membranes as potential skin regeneration scaffolds with an electro-spinning process. Scanning electron microscopy (SEM), water contact angles measurement, Fourier transform infrared (FTIR) spectroscopy, wide angle X-ray diffraction (WAXD), tensile mechanical tests and thermo-gravimetric analysis (TGA) were carried out to characterize the nanofibrous membranes. The results showed that the blending of RSSP greatly decreased the nanofibers' average diameter, enhanced the hydrophilicity, changed the microstructure and thermal properties, and could enable tailored mechanical properties of the nanofibrous membranes. Among the blended membranes, the PLCL/RSSP (75/25) membrane was chosen for further investigation on biocompatibility. The results of hemolysis assays and for proliferation of human foreskin fibroblast cells (hFFCs) confirmed the membranes potential use as skin-regeneration scaffolds. Subsequent culture of mouse embryonic fibroblast cells (NIH-3T3) demonstrated the feasibility of the blended membranes as a human epidermal growth factor (hEGF) delivery matrix. The PLCL/RSSP (75/25) membrane possessed good properties comparable to those of human skin with high biocompatibility and the ability of hEGF delivery. Further studies can be carried out on such membranes with chemical or genetic modifications to make better scaffolds for skin regeneration.

Novel strategies for designing regenerative skin products for accelerated wound healing

Healthy skin protects from pathogens, water loss, ultraviolet rays, and also maintains homeostasis conditions along with sensory perceptions in normal circumstances. Skin wound healing mechanism is a multi-phased biodynamic process that ultimately triggers intercellular and intracellular mechanisms. Failure to implement the normal and effective healing process may result in chronic injuries and aberrant scarring. Chronic wounds lead to substantial rising healthcare expenditure, and innovative methods to diagnose and control severe consequences are urgently needed. Skin tissue engineering (STE) has achieved several therapeutic accomplishments during the last few decades, demonstrating tremendous development. The engineered skin substitutes provide instant coverage for extensive wounds and facilitate the prevention of microbial infections and fluid loss; furthermore, they help in fighting inflammation and allow rapid neo-tissue formation. The current review primarily focused on the wound recovery and restoration process and the current conditions of STE with various advancements and complexities associated with different strategies such as cell sources, biopolymers, innovative fabrication techniques, and growth factors delivery systems.

Hybrid membrane of flat silk cocoon and carboxymethyl chitosan formed through hot pressing promotes wound healing and repair in a rat model

Clinical wound management is always a relatively urgent problem. Moreover, wounds, especially severe wounds with excessive tension or excessive movement are prone to tissue infection, necrosis, and other negative effects during healing. Therefore, research has aimed to develop low-cost complementary treatments to address the urgent need for an innovative low-cost dressing that can adapt to high mechanical requirements and complex wound conditions. At present, tissue engineering to produce artificial skin with a structure similar to that of normal skin is one effective method to solve this challenge in the regeneration and repair of serious wounds. The present study hot pressed flat silk cocoons (FSC) with carboxymethyl chitosan (CMCS) to generate a cross-linked binding without enzymes or cross-linking agents that simulated the 3D structural composites of the skin cuticle. This hybrid membrane showed potential to reduce inflammatory cells and promote neovascularization in skin wound repair. After hot pressing at 130°C and 20 Mpa, the FSC/CMCS composite material was denser than FSC, showed strong light transmission, and could be arbitrarily cut. Simulating the normal skin tissue structure, the hybrid membrane overcame the poor mechanical properties of traditional support materials. Moreover, the combination of protein and polysaccharide simulated the extracellular matrix, thus providing better biocompatibility. The results of this study also demonstrated the excellent mechanical properties of the FSC/CMCS composite support material, which also provided a low-cost and environmentally friendly process for making dressings. In addition, the results of this study preliminarily reveal the mechanism by which the scaffolds promoted the healing of full-thickness skin defects on the back of SD rats. In vivo experiments using a full-thickness skin defect model showed that the FSC/CMCS membranes significantly promoted the rate of wound healing and also showed good effects on blood vessel formation and reduced inflammatory reactions. This bionic support structure, with excellent repair efficacy on deep skin defect wounds, showed potential to further improve the available biomaterial systems, such as skin and other soft tissues.

Potential of stem cell seeded three-dimensional scaffold for regeneration of full-thickness skin wounds

Hypoxic wounds are tough to heal and are associated with chronicity, causing major healthcare burden. Available treatment options offer only limited success for accelerated and scarless healing. Traditional skin substitutes are widely used to improve wound healing, however, they lack proper vascularization. Mesenchymal stem cells (MSCs) offer improved wound healing; however, their poor retention, survival and adherence at the wound site negatively affect their therapeutic potential. The aim of this study is to enhance skin regeneration in a rat model of full-thickness dermal wound by transplanting genetically modified MSCs seeded on a three-dimensional collagen scaffold. Rat bone marrow MSCs were efficiently incorporated in the acellular collagen scaffold. Skin tissues with transplanted subcutaneous scaffolds were histologically analysed, while angiogenesis was assessed both at gene and protein levels. Our findings demonstrated that three-dimensional collagen scaffolds play a potential role in the survival and adherence of stem cells at the wound site, while modification of MSCs with jagged one gene provides a conducive environment for wound regeneration with improved proliferation, reduced inflammation and enhanced vasculogenesis. The results of this study represent an advanced targeted approach having the potential to be translated in clinical settings for targeted personalized therapy.