The effect of polyaspartate chain length on mediating biomimetic remineralization of collagenous tissues

Calcium phosphate nanoclusters modify periodontium remodeling and minimize orthodontic relapse

Orthodontic relapse is one of the most prevalent concerns of orthodontic therapy. Relapse results in patients' teeth reverting towards their pretreatment positions, which increases the susceptibility to functional problems, dental disease, and substantially increases the financial burden for retreatment. This phenomenon is thought to be induced by rapid remodeling of the periodontal ligament (PDL) in the early stages and poor bone quality in the later stages. Current therapies including fixed or removable retainers and fiberotomies have limitations with patient compliance and invasiveness. Approaches using biocompatible biomaterials, such as calcium phosphate polymer-induced liquid precursors (PILP), are an ideal translational approach for minimizing orthodontic relapse. Here, post-orthodontic relapse is reduced after a single injection of high concentration PILP (HC-PILP) nanoclusters by altering PDL remodeling in the early stage of relapse and improving trabecular bone quality in the later stage. HC-PILP nanoclusters are achieved by using high molecular weight poly aspartic acid (PASP, 14 kDa) and poly acrylic acid (PAA, 450 kDa), which resulted in a stable solution of high calcium and phosphate concentrations without premature precipitation. In vitro results show that HC-PILP nanoclusters prevented collagen type-I mineralization, which is essential for the tooth-PDL-bone interphase. In vivo experiments show that the HC-PILP nanoclusters minimize relapse and improve the trabecular bone quality in the late stages of relapse. Interestingly, HC-PILP nanoclusters also altered the remodeling of the PDL collagen during the early stages of relapse. Further in vitro experiments showed that HC-PILP nanoclusters alter the fibrillogenesis of collagen type-I by impacting the protein secondary structure and forming aggregates. These findings propose a new approach for treating orthodontic relapse and provide additional insight into the PILP nanocluster's structure and properties on collagenous structure repair.

Exploring Biomineralization Processes Using In Situ Liquid Transmission Electron Microscopy: A Review

Liquid transmission electron microscopy (TEM) is a newly established technique broadly used to study reactions in situ. Since its emergence, complex and multifaceted biomineralization processes have been revealed with real-time resolution, where classical and non-classical mineralization pathways have been dynamically observed primarily for Ca and Fe-based mineral systems in situ. For years, classical crystallization pathways have dominated theories on biomineralization progression despite observations of non-traditional routes involving precursor phases using traditional- and cryo-TEM. The new dynamic lens provided by liquid TEM is a key correlate to techniques limited to time-stamped, static observations - helping shift paradigms in biomineralization toward non-classical theories with dynamic mechanistic visualization. Liquid TEM provides new insights into fundamental biomineralization processes and essential physiological and pathological processes for a wide range of organisms. This review critically reviews a summary of recent in situ liquid TEM research related to the biomineralization field. Key liquid TEM preparation and imaging parameters are provided as a foundation for researchers while technical challenges are discussed. In future, the expansion of liquid TEM research in the biomineralization field will lead to transformative discoveries, providing complementary dynamic insights into biological systems.

Advancing dentin remineralization: Exploring amorphous calcium phosphate and its stabilizers in biomimetic approaches

OBJECTIVE

This review elucidates the mechanisms underpinning intrafibrillar mineralization, examines various amorphous calcium phosphate (ACP) stabilizers employed in dentin's intrafibrillar mineralization, and addresses the challenges encountered in clinical applications of ACP-based bioactive materials.

METHODS

The literature search for this review was conducted using three electronic databases: PubMed, Web of Science, and Google Scholar, with specific keywords. Articles were selected based on inclusion and exclusion criteria, allowing for a detailed examination and summary of current research on dentin remineralization facilitated by ACP under the influence of various types of stabilizers.

RESULTS

This review underscores the latest advancements in the role of ACP in promoting dentin remineralization, particularly intrafibrillar mineralization, under the regulation of various stabilizers. These stabilizers predominantly comprise non-collagenous proteins, their analogs, and polymers. Despite the diversity of stabilizers, the mechanisms they employ to enhance intrafibrillar remineralization are found to be interrelated, indicating multiple driving forces behind this process. However, challenges remain in effectively designing clinically viable products using stabilized ACP and maximizing intrafibrillar mineralization with limited materials in practical applications.

SIGNIFICANCE

The role of ACP in remineralization has gained significant attention in dental research, with substantial progress made in the study of dentin biomimetic mineralization. Given ACP's instability without additives, the presence of ACP stabilizers is crucial for achieving in vitro intrafibrillar mineralization. However, there is a lack of comprehensive and exhaustive reviews on ACP bioactive materials under the regulation of stabilizers. A detailed summary of these stabilizers is also instrumental in better understanding the complex process of intrafibrillar mineralization. Compared to traditional remineralization methods, bioactive materials capable of regulating ACP stability and controlling release demonstrate immense potential in enhancing clinical treatment standards.

Calcium phosphate nanoclusters modify periodontium remodeling and minimize orthodontic relapse

Orthodontic relapse is one of the most prevalent concerns of orthodontic therapy. Relapse results in patients' teeth reverting towards their pretreatment positions, which increases the susceptibility to functional problems, dental disease, and substantially increases the financial burden for retreatment. This phenomenon is thought to be induced by rapid remodeling of the periodontal ligament (PDL) in the early stages and poor bone quality in the later stages. Current therapies, including fixed or removable retainers and fiberotomies, have limitations with patient compliance and invasiveness. Approaches using biocompatible biomaterials, such as calcium phosphate polymer-induced liquid precursors (PILP), is an ideal translational approach for minimizing orthodontic relapse. Here, post-orthodontic relapse is reduced after a single injection of high concentration PILP (HC-PILP) nanoclusters by altering PDL remodeling in the early stage of relapse and improving trabecular bone quality in the later phase. HC-PILP nanoclusters are achieved by using high molecular weight poly aspartic acid (PASP, 14 kDa) and poly acrylic acid (PAA, 450 kDa), which resulted in a stable solution of high calcium and phosphate concentrations without premature precipitation. In vitro results show that HC-PILP nanoclusters prevented collagen type-I mineralization, which is essential for the tooth-periodontal ligament (PDL)-bone interphase. In vivo experiments show that the PILP nanoclusters minimize relapse and improve the trabecular bone quality in the late stages of relapse. Interestingly, PILP nanoclusters also altered the remodeling of the PDL collagen during the early stages of relapse. Further in vitro experiments showed that PILP nanoclusters alter the fibrillogenesis of collagen type-I by impacting the protein secondary structure. These findings propose a novel approach for treating orthodontic relapse and provide additional insight into the PILP nanocluster's structure and properties on collagenous structure repair.

New Avenues for Capturing Mineralization Events at Biomaterial Interfaces with Liquid-Transmission Electron Microscopy

Liquid-transmission electron microscopy (liquid-TEM) provides exciting potential for capturing mineralization events at biomaterial interfaces, though it is largely unexplored. To address this, we established a unique approach to visualize calcium phosphate (CaP)-titanium (Ti) interfacial mineralization events by combining the nanofabrication of Ti lamellae by focused ion beam with in situ liquid-TEM. Multiphasic CaP particles were observed to nucleate, adhere, and form different assemblies onto and adjacent to Ti lamellae. Here, we discuss new approaches for exploring the interaction between biomaterials and liquids at the nanoscale. Driving this technology is crucial for understanding and controlling biomineralization to improve implant osseointegration and direct new pathways for mineralized tissue disease treatment in the future.

Liquid Transmission Electron Microscopy for Probing Collagen Biomineralization

Collagen biomineralization is fundamental to hard tissue assembly. While studied extensively, collagen mineralization processes are not fully understood, with the majority of theories derived from electron microscopy (EM) under static, dehydrated, or frozen conditions, unlike the liquid phase environment where mineralization occurs. Herein, novel liquid transmission EM (TEM) strategies are presented, in which collagen mineralization was explored in liquid for the first time via TEM. Custom thin-film enclosures were employed to visualize the mineralization of reconstituted collagen fibrils in a calcium phosphate and polyaspartic acid solution to promote intrafibrillar mineralization. TEM highlighted that at early time points precursor mineral particles attached to collagen and progressed to crystalline mineral platelets aligned with fibrils at later time points. This aligns with observations from other techniques and validates the liquid TEM approach. This work provides a new liquid imaging approach for exploring collagen biomineralization, advancing toward understanding disease pathogenesis and remineralization strategies for hard tissues.

Synergistic effect of ion-releasing fillers on the remineralization and mechanical properties of resin-dentin bonding interfaces

In modern restorative dentistry, adhesive resin materials are vital for achieving minimally invasive, esthetic, and tooth-preserving restorations. However, exposed collagen fibers are found in the hybrid layer of the resin-dentin bonding interface due to incomplete resin penetration. As a result, the hybrid layer is susceptible to attack by internal and external factors such as hydrolysis and enzymatic degradation, and the durability of dentin bonding remains limited. Therefore, efforts have been made to improve the stability of the resin-dentin interface and achieve long-term clinical success. New ion-releasing adhesive resin materials are synthesized by introducing remineralizing ions such as calcium and phosphorus, which continuously release mineral ions into the bonding interface in resin-bonded restorations to achieve dentin biomimetic remineralization and improve bond durability. As an adhesive resin material capable of biomimetic mineralization, maintaining excellent bond strength and restoring the mechanical properties of demineralized dentin is the key to its function. This paper reviews whether ion-releasing dental adhesive materials can maintain the mechanical properties of the resin-dentin bonding interface by supplementing the various active ingredients required for dentin remineralization from three aspects: phosphate, silicate, and bioactive glass.

L-serine combined with carboxymethyl chitosan guides amorphous calcium phosphate to remineralize enamel

The aim of this study is to investigate a robust and stable calcium-phosphorus system to remineralize human early enamel caries lesions with nanocomplexes of carboxymethyl chitosan/L-serine/amorphous calcium phosphate (CMC-Ser-ACP) to develop an effective method for mimicking the amelogenin (AMEL) mineralization pattern through ACP assembly. A CMC-Ser-ACP nanocomplex solution was first synthesized by a chemical precipitation method, and then 1% sodium hypochlorite (NaClO) was added to induce ACP phase formation. The morphologies of the nanocomplexes were characterized by transmission electron microscopy (TEM), and zeta potential analysis and Fourier transform infrared spectroscopy (FTIR) were performed to detect surface charge and functional group changes. The subtle changes of the demineralized enamel models induced by the remineralization effect were observed by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The CMC-Ser-ACP nanocomplex solution could be preserved without any precipitation for 45 days. After the application of NaClO and through the guidance of Ser, ACP nanoparticles transformed into relatively orderly arranged hydroxyapatite (HAP) crystals, generating an aprismatic enamel-like layer closely integrated with the demineralized enamel, which resulted in enhanced mechanical properties for the treatment of early enamel caries lesions. The CMC-Ser-ACP nanocomplex solution is a remineralization system with great solution stability, and when NaClO is added, it can rapidly regenerate an aprismatic enamel-like layer in situ on the demineralized enamel surface. This novel remineralization system has stable chemical properties and can greatly increase the therapeutic effects against early enamel caries.

Calcium Phosphate Delivery Systems for Regeneration and Biomineralization of Mineralized Tissues of the Craniofacial Complex

Calcium phosphate (CaP)-based materials have been extensively used for mineralized tissues in the craniofacial complex. Owing to their excellent biocompatibility, biodegradability, and inherent osteoconductive nature, their use as delivery systems for drugs and bioactive factors has several advantages. Of the three mineralized tissues in the craniofacial complex (bone, dentin, and enamel), only bone and dentin have some regenerative properties that can diminish due to disease and severe injuries. Therefore, targeting these regenerative tissues with CaP delivery systems carrying relevant drugs, morphogenic factors, and ions is imperative to improve tissue health in the mineralized tissue engineering field. In this review, the use of CaP-based microparticles, nanoparticles, and polymer-induced liquid precursor (PILPs) amorphous CaP nanodroplets for delivery to craniofacial bone and dentin are discussed. The use of these various form factors to obtain either a high local concentration of cargo at the macroscale and/or to deliver cargos precisely to nanoscale structures is also described. Finally, perspectives on the field using these CaP materials and next steps for the future delivery to the craniofacial complex are presented.

Biomineralization of bone tissue: calcium phosphate-based inorganics in collagen fibrillar organic matrices

BACKGROUND

Bone regeneration research is currently ongoing in the scientific community. Materials approved for clinical use, and applied to patients, have been developed and produced. However, rather than directly affecting bone regeneration, these materials support bone induction, which regenerates bone. Therefore, the research community is still researching bone tissue regeneration. In the papers published so far, it is hard to find an improvement in the theory of bone regeneration. This review discusses the relationship between the existing theories on hard tissue growth and regeneration and the biomaterials developed so far for this purpose and future research directions.

MAINBODY

Highly complex nucleation and crystallization in hard tissue involves the coordinated action of ions and/or molecules that can produce different organic and inorganic composite biomaterials. In addition, the healing of bone defects is also affected by the dynamic conditions of ions and nutrients in the bone regeneration process. Inorganics in the human body, especially calcium- and/or phosphorus-based materials, play an important role in hard tissues. Inorganic crystal growth is important for treating or remodeling the bone matrix. Biomaterials used in bone tissue regeneration require expertise in various fields of the scientific community. Chemical knowledge is indispensable for interpreting the relationship between biological factors and their formation. In addition, sources of energy for the nucleation and crystallization processes of such chemical bonds and minerals that make up the bone tissue must be considered. However, the exact mechanism for this process has not yet been elucidated. Therefore, a convergence of broader scientific fields such as chemistry, materials, and biology is urgently needed to induce a distinct bone tissue regeneration mechanism.

CONCLUSION

This review provides an overview of calcium- and/or phosphorus-based inorganic properties and processes combined with organics that can be regarded as matrices of these minerals, namely collagen molecules and collagen fibrils. Furthermore, we discuss how this strategy can be applied to future bone tissue regenerative medicine in combination with other academic perspectives.

A Polyplex in a Shell: The Effect of Poly(aspartic acid)-Mediated Calcium Carbonate Mineralization on Polyplexes Properties and Transfection Efficiency

Mineralization by exposure of organic templates to supersaturated solutions is used by many living organisms to generate specialized materials to perform structural or protective functions. Similarly, it was suggested that improved robustness acquired through mineralization under natural conditions could be an important factor for virus survival outside of a host for better transfection of cells. Here, inspired by this fact, we developed a nonviral tricomponent polyplex system for gene delivery capable of undergoing mineralization. First, we fabricated anionic polyplexes carrying pDNA by self-assembly with a lipid-modified cationic polymer and coating by poly(aspartic acid). Then, we submitted the polyplexes to a two-step mineralization reaction to precipitate CaCO₃ under various supersaturations. We carried out detailed morphological studies of the mineralized polyplexes and identified which parameters of the fabrication process were influential on transfection efficiency. We found that mineralization with CaCO₃ is efficient in promoting transfection efficiency as long as a certain Ca²⁺/CO₃^2- lower limit ratio is respected. However, calcium incubation can also be used to achieve similar effects at higher concentrations depending on polyplex composition, probably due to the formation of physical cross-links by calcium binding to poly(aspartic acid). We proposed that the improved robustness and transfection efficiency provided by means of mineralization can be used to expand the possible applications of polyplexes in gene therapy.

Mineralization of calcium phosphate on two-dimensional polymer films with controllable density of carboxyl groups

Two-dimensional polymers functionalized with controllable density of carboxyl groups were constructed with the Langmuir-Blodgett method. Mineralization of calcium phosphate shows significantly different characteristics on these films, which clearly indicates that the density of carboxy groups plays a determining role in controlling the nucleation and orientated growth of calcium phosphate.

Mineralized polyplexes for gene delivery: Improvement of transfection efficiency as a consequence of calcium incubation and not mineralization

Gene therapy is an emerging field in which nucleic acids are used to control protein expression. The necessity of delivering nucleic acids to specific cell types and intracellular sites demands the use of highly specialized gene carriers. As a carrier modification technique, mineralization has been successfully used to modify viral and non-viral carriers, providing new properties that ultimately aim to increase the transfection efficiency. However, for the specific case of polyplexes used in gene therapy, recent literature shows that interaction with calcium, a fundamental step of mineralization, might be effective to increase transfection efficiency, leaving an ambiguity about of the role of mineralization for this type of gene carriers. To answer this question and to reveal the properties responsible for increasing transfection efficiency, we mineralized poly(aspartic acid) coated polyplexes at various CaCl₂ and Na₃PO₄ concentrations, and evaluated the resultant carriers for physicochemical and morphological characteristics, as well as transfection and delivery efficiency with MC3T3-E1 mouse osteoblastic cells. We found that both mineralization and calcium incubation positively affected the transfection efficiency and uptake of polyplexes in MC3T3-E1 cells. However, this effect originated from the properties achieved by polyplexes after the calcium incubation step that are maintained after mineralization, including particle size increase, improved pDNA binding, and adjustment of zeta potential. Considering that mineralization can be a longer process than calcium incubation, we find that calcium incubation might be sufficient and preferred if improved transfection efficiency in vitro is the only effect desired.

Polyaminoacids in Biomimetic Collagen Mineralization: Roles of Isomerization and Disorder in Polyaspartic and Polyglutamic Acids

The extracellular matrix of hard connective tissues is composed primarily of mineralized collagen fibrils. Acidic noncollagenous proteins play important roles in mediating mineralization of collagen. Polyaspartate, a homopolymer substitute for such proteins, has been used extensively in in vitro models to produce biomimetic mineralized collagen. Polyglutamate behaves differently in mineralization models, despite its chemical similarity. We show that polyaspartate is a 350 times more effective inhibitor of solution precipitation of hydroxyapatite than polyglutamate. Supersaturated CaP solutions stabilized with polyaspartic acid produce collagen with aligned intrafibrillar mineral, while solutions containing polyglutamate lead to the formation of unaligned mineral clusters on the fibril surface. Molecular analysis showed that the commercial polyaspartic acid contains substantial isomerization, unlike polyglutamic acid. Hence, the secondary structure of polyaspartic acid is more disordered than that of polyglutamic acid. The increased flexibility of the polyaspartic acid chain may explain its potency as an inhibitor of solution crystallization and a mediator of intrafibrillar collagen mineralization.

Simulation Insight into the Synergic Role of Citrate and Polyaspartic Peptide in Biomineralization

Hydroxyapatite (HAP) is one of the most important inorganic components in biological minerals such as bones and teeth. More than 90% of the total citrate is accumulated in human bones and other biomineralized tissues. In addition, mineralizing proteins are enriched in glutamate and aspartate residues, which are important for their mineral-regulating properties. However, how citrate ions (CITs) and/or acidic amino acids regulate the formation of HAP is still unclear. In this work, molecular dynamics simulations were performed to study how CIT regulates the adsorption behavior of polyaspartic acid (PASP) on the HAP surface in the calcium phosphate solution. The simulation results indicate that PASP can be used as an ion chelator to complex Ca²⁺ and can serve as templates for HAP mineralization by templating the distribution of Ca²⁺ on its surface, which are attributed to the -COO^- and α-helix structure. Most importantly, the orientation distributions of PASP in all systems are narrower with the help of CIT, thereby PASP can be adsorbed on the HAP surface stably with a "lying-down" orientation. This indicates that CIT can be used as a bridging agent to bond the acidic peptide to the HAP surface in biomineralization. Thus, the synergic role of CIT and the acidic peptide on the HAP surface were revealed in this work, which can provide new insights into the interfacial phenomena during the biomineralization.

Biomineralization of Collagen-Based Materials for Hard Tissue Repair

Hydroxyapatite (HA) reinforced collagen fibrils serve as the basic building blocks of natural bone and dentin. Mineralization of collagen fibrils play an essential role in ensuring the structural and mechanical functionalities of hard tissues such as bone and dentin. Biomineralization of collagen can be divided into intrafibrillar and extrafibrillar mineralization in terms of HA distribution relative to collagen fibrils. Intrafibrillar mineralization is termed when HA minerals are incorporated within the gap zone of collagen fibrils, while extrafibrillar mineralization refers to the minerals that are formed on the surface of collagen fibrils. However, the mechanisms resulting in these two types of mineralization still remain debatable. In this review, the evolution of both classical and non-classical biomineralization theories is summarized. Different intrafibrillar mineralization mechanisms, including polymer induced liquid precursor (PILP), capillary action, electrostatic attraction, size exclusion, Gibbs-Donnan equilibrium, and interfacial energy guided theories, are discussed. Exemplary strategies to induce biomimetic intrafibrillar mineralization using non-collagenous proteins (NCPs), polymer analogs, small molecules, and fluidic shear stress are discussed, and recent applications of mineralized collagen fibers for bone regeneration and dentin repair are included. Finally, conclusions are drawn on these proposed mechanisms, and the future trend of collagen-based materials for bone regeneration and tooth repair is speculated.

Mineralized DNA-collagen complex-based biomaterials for bone tissue engineering

DNA is a highly polyanionic biomolecule that complexes with both collagen and hydroxyapatite. By combining these complexes, we synthesized nucleic-acid collagen complexes (NACC) mineralized with hydroxyapatite. The composite complexes were made using a short, monodisperse single-stranded DNA, type I collagen, and mineralizing medium. They rapidly self-assembled into both mineralized NACC microfibers and 3D NACC gels. At the nanoscale, these complexes are hierarchical, interwoven, curly nanofibrils resembling native extracellular matrix, which mineralized an interpenetrating nanocrystalline hydroxyapatite phase. Mineralization was able to be done either before or after NACC formation enabling temporal control of the process. In response to the NACC material, primary human osteoblasts took on an osteocyte-like morphology. Moreover, the cells agglomerated and remodeled the NACC gels into densified, tissue-like structures within 3 days. NACC fibers and gels have promise not only as osteoconductive coatings and scaffolds, but as coatings and scaffolds for any tissue using this new form of naturally-derived biomaterials.

Alternate soaking enables easy control of mineralized collagen scaffold mechanics from nano- to macro-scale

The mechanical properties of biologic scaffolds are critical to cellular interactions and hence functional response within the body. In the case of scaffolds for bone tissue regeneration, engineered scaffolds created by combining collagen with inorganic mineral are increasingly being explored, due to their favourable structural and chemical characteristics. Development of a method for controlling the mechanics of these scaffolds could lead to significant additional advantages by harnessing the intrinsic mechnotransduction pathways of stem cells via appropriate control of scaffold mechanical properties. Here we present a method for controlling the macroscale flexural modulus of mineralized collagen sheets, and the radial indentation modulus of the sheets' constituent collagen fibrils. Scaffolds were created starting with sheets of highly aligned, natively structured collagen fibrils, prepared via cryosectioning of decellularized tendon. Sheets underwent an alternate soaking mineralization procedure, with sequential exposure to citrate-doped calcium and carbonate-containing phosphate solutions, both of which included poly aspartic acid. The extent of scaffold mineralization was controlled via number of repeated mineralization cycles: 0 (unmineralized), 5, 10, and 20 cycles were trialed. Following scaffold preparation, ultrastructure, macroscale flexural modulus, and nanoscale indentation modulus were assessed. Surface architecture studied by SEM, and inspection of individual extracted fibrils by TEM and AFM confirmed that fibrils became increasingly laden with mineral as the number of mineralization cycles increased. Measurements of collagen fibril nanomechanics using AFM showed that the radial modulus of collagen fibrils increased linearly with mineralization cycles completed, from 215 ± 125 MPa for fibrils from unmineralized (0 cycle) scaffolds to 778 ± 302 MPa for fibrils from the 20 mineralization cycle scaffolds. Measurements of scaffold macromechanics via flexural testing also showed a linear increase in flexural modulus with increasing number of mineralization cycles completed, from 18 ± 7 MPa for the 5 cycle scaffolds to 156 ± 50 MPa for the 20 cycle scaffolds. The process detailed herein provides a way to create mineralized collagen scaffolds with easily controllable mechanical properties.

Influence of Calcium Binding on Conformations and Motions of Anionic Polyamino Acids. Effect of Side Chain Length

Investigation of the effect of CaCl2 salt on conformations of two anionic poly(amino acids) with different side chain lengths, poly-(α-l glutamic acid) (PGA) and poly-(α-l aspartic acid) (PASA), was performed by atomistic molecular dynamics (MD) simulations. The simulations were performed using both unbiased MD and the Hamiltonian replica exchange (HRE) method. The results show that at low CaCl2 concentration adsorption of Ca2+ ions lead to a significant chain size reduction for both PGA and PASA. With the increase in concentration, the chains sizes partially recover due to electrostatic repulsion between the adsorbed Ca2+ ions. Here, the side chain length becomes important. Due to the longer side chain and its ability to distance the charged groups with adsorbed ions from both each other and the backbone, PGA remains longer in the collapsed state as the CaCl2 concentration is increased. The analysis of the distribution of the mineral ions suggests that both poly(amino acids) should induce the formation of mineral with the same structure of the crystal cell.

A novel amphiphilic oligopeptide induced the intrafibrillar mineralisation via interacting with collagen and minerals

Mineralised collagen fibrils constitute the basic building blocks of bone, dentin and cementum. Noncollagenous proteins (NCPs) that are indispensable for collagen biomineralisation are not commercially available, and the mechanism of intrafibrillar mineralisation remains debatable. Herein, synthetic biomimetic molecules are regarded as alternative candidates for NCPs, and more convenient in revealing the mechanism of intrafibrillar mineralisation in vitro. Here, we fabricated a novel amphiphilic oligopeptide imitating a natural NCP. We aimed to investigate the effectiveness of the oligopeptide in intrafibrillar mineralisation and partially reveal the corresponding mechanism in vitro. The effectiveness of the oligopeptide in intrafibrillar mineralisation was characterised from the following aspects: (1) mineral interaction, (2) collagen binding and (3) induction of intrafibrillar mineralisation. Results indicated that the self-assembled oligopeptide could attract calcium ions inducing the formation of amorphous precursors; and bind onto the surface of collagen fibrils. These processes were mainly driven by the electrostatic attraction and hydrogen bonds. The self-assembled oligopeptide induced the intrafibrillar mineralisation of reconstituted collagen fibrils, in which the c-axis of apatite crystallites was roughly parallel to the long axis of the fibrils. The collagen mineralisation was achieved by binding with the self-assembled oligopeptide to increase the pool of mineralization precursors available for intrafibrillar mineralisation. In addition, the self-assembled oligopeptide induced dentin collagen remineralisation and formed a 30 μm-thick remineralised layer within 96 h. Our work sheds light on the fabrication of a novel biomimetic molecule for collagen mineralisation. The results should serve as a reference for understanding the mechanism of intrafibrillar mineralisation.

The Significance and Utilisation of Biomimetic and Bioinspired Strategies in the Field of Biomedical Material Engineering: The Case of Calcium Phosphat-Protein Template Constructs

This review provides a summary of recent research on biomimetic and bioinspired strategies applied in the field of biomedical material engineering and focusing particularly on calcium phosphate-protein template constructs inspired by biomineralisation. A description of and discussion on the biomineralisation process is followed by a general summary of the application of the biomimetic and bioinspired strategies in the fields of biomedical material engineering and regenerative medicine. Particular attention is devoted to the description of individual peptides and proteins that serve as templates for the biomimetic mineralisation of calcium phosphate. Moreover, the review also presents a description of smart devices including delivery systems and constructs with specific functions. The paper concludes with a summary of and discussion on potential future developments in this field.

Functionalized DNA nanostructures as scaffolds for guided mineralization

The field of DNA nanotechnology uses synthetic DNA strands as building blocks for designing complex shapes in one-, two- and three-dimensions. Here, we investigate whether DNA nanostructures are feasible platforms for the precise organization of polyaspartic acid (pAsp), a known mineral carrier, with a goal towards biomimetic mineralization for enamel regeneration. We describe the preparation of DNA-pAsp conjugates and their subsequent assembly into ordered nanostructures. Covalent attachment of pAsp to DNA was noted to hinder DNA nanostructure formation past a certain threshold (50% pAsp) when tested on a previously published DNA system. However, a simplified double stranded DNA system (3sDH system) was more robust and efficient in its pAsp incorporation. In addition, the 3sDH system was successful in organizing mineral inducing groups in one dimension at repeating intervals of 28.7 ± 4.0 nm, as determined by atomic force microscopy. Our results demonstrate that DNA nanostructures can be functionalized with pAsp and act as a platform to investigate guided mineralization.