Fate and transport of polycyclic aromatic hydrocarbons in upland irish headwater lake catchments

Biodegradation of high molecular weight polycyclic aromatic hydrocarbons by Sarocladium terricola strain PYR-233 isolated from petrochemical contaminated sediment

Polycyclic aromatic hydrocarbons (PAHs) were frequently found in sediment and were primarily treated through microbial degradation. Thus, efficient management of PAH pollution requires exploring the molecular degradation mechanisms of PAHs and expanding the pool of available microbial resources. A fungus (identified as Sarocladium terricola strain RCEF778) with the remarkable ability to degrade pyrene was screened from sediment near a petrochemical plant, and its growth and pyrene degradation characteristics were comprehensively investigated. The results showed that the fungus exhibited great effectiveness in pyrene degradation, with a degradation ratio of 88.97% at 21 days at the conditions: 35 °C, pH 7, 10 mg L-1 initially pyrene concentration, 3% supplementary salt, and glucose supplementation. The generation and concentration variation of the intermediate products were identified, and the results revealed that the fungus degraded pyrene through two pathways: by salicylic acid and by phthalic acid. Three sediments (M1, M2, M3), each exhibiting different levels of PAH pollution, were employed to examine the effectiveness of fungal degradation of PAHs in practical sediment samples. These data showed that with the fungus, the degradation ratios ranged from 13.64% to 23.50% for 2-3 rings PAHs, 40.93%-49.41% for 4 rings PAHs, and 39.59%-48.07% for 5-6 rings PAHs, which were significantly higher than those for the sediment without the fungus and confirmed the excellent performance of the fungal. Moreover, the Gompertz model was employed to analyze the degradation kinetics of 4-rings and 5-6 rings PAHs in these sediments, and the results demonstrated that the addition of the fungus could significantly increase the maximum degradation ratio, degradation start-up rate and maximum degradation rate of 4-rings and 5-6 rings PAHs and shorten the time required to reach the maximum degradation rate. This study not only supplied fungal materials but also established crucial theoretical foundations for the development of bioremediation technologies aimed at high molecular weight PAH-contaminated sediments.

Degradation of pyrene by Xanthobacteraceae bacterium strain S3 isolated from the rhizosphere sediment of Vallisneria natans: active conditions, metabolite identification, and proposed pathways

Polycyclic aromatic hydrocarbons (PAHs) were typical environmental contaminants that accumulated continuously in sediment. Microbial degradation is the main way of PAH degradation in the natural environment. Therefore, expanding the available pool of microbial resources and investigating the molecular degrading mechanisms of PAHs are critical to the efficient control of PAH-polluted sites. Here, a strain (identified as Xanthobacteraceae bacterium) with the ability to degrade pyrene was screened from the rhizosphere sediment of Vallisneria natans. Response surface analysis showed that the strain could degrade pyrene at pH 5-7, NaCl addition 0-1.5%, and temperature 25-40 °C, and the maximum pyrene degradation (~ 95.4%) was obtained under the optimum conditions (pH 7.0, temperature 28.5 °C, and NaCl-free addition) after 72 h. Also, it was observed that the effect of temperature on the degradation ratio was the most significant. Furthermore, eighteen metabolites were identified by mass spectrometry, among which (2Z)-2-hydroxy-3-(4-oxo-4H-phenalen-3-yl) prop-2-enoic acid, 7-(carboxymethyl)-8-formyl-1-naphthyl acetic acid, phthalic acid, naphthalene-1,2-diol, and phenol were the main metabolites. And the degradation pathway of pyrene was proposed, suggesting that pyrene undergoes initial ortho-cleavage under the catalysis of metapyrocatechase to form (2Z)-2-hydroxy-3-(4-oxo-4H-phenalen-3-yl) prop-2-enoic acid. Subsequently, this intermediate was progressively oxidized and degraded to phthalic acid or phenol, which could enter the tricarboxylic acid cycle. Furthermore, the pyrene biodegradation by the strain followed the first-order kinetic model and the degradation rate changed from fast to slow, with the rate remaining mostly slow in the later stages. The slow biodegradation rate was probably caused by a significant amount of phenol accumulation in the initial stage of degradation, which resulted in a decrease in bacterial activity or death.

A review of the occurrence, distribution, and impact of bitumen seeps on soil and groundwater in parts of southwestern Nigeria

The impact of bitumen components on soil and groundwater resources is of environmental importance. Contaminants' influx into the environment from bitumen components through anthropogenic activities such as exploration, mining, transportation, and usage of bitumen in all its forms have been reported globally. However, gaps exist in the geogenic occurrence of bitumen in the shallow subsurface such as in southwest Nigeria, contaminating the soil and groundwater resources. This review presents in situ bitumen seeps as a source of geogenic soil and groundwater contaminants in southwestern Nigeria. We conducted a systematic review of literatures based on defined selection criteria. We derived information on the state of knowledge about bitumen seep occurrences and distribution in southwestern Nigeria. Also, the processes that exacerbate bitumen contaminants' influx into soil and groundwater were enunciated. At the same time, case examples highlighted areas for possible in situ bitumen contamination studies in Nigeria. The results of this review showed that a multidisciplinary approach has been employed to assess and monitor the contaminants resulting from the various activities involving the exploitation and application of bitumen in Nigeria. These studies emphasize bitumen contaminants as emanating from anthropogenic sources. The results also suggested that bitumen studies have been mainly exploratory to improve the understanding of the economic potential of the hydrocarbon reserve. Also, recent advances in bitumen contaminants studies accounted for the heterogeneous nature of the bitumen. This allows for the optimized categorization of the mechanism and processes undergone by the different bitumen components when released as environmental contaminants. However, a knowledge gap exists in characterizing and understanding the effects of in situ bitumen seeps as a geogenic source of soil and groundwater contamination. This review identifies the possibility of geogenic soil and groundwater contamination by in situ bitumen seeps in the coastal plain sand of the Dahomey basin in southwestern Nigeria. The impact of the bitumen contaminants on the environment was discussed, while methods for accessing the occurrence and distribution of the bitumen contaminants were highlighted.

Compounds of wastewater origin in remote upland lakes in Ireland

It is well established that persistent organic pollutants are transported long distances in the atmosphere and deposited into aquatic and terrestrial ecosystems in remote areas, including high altitude lakes. The objective of this research was to evaluate whether compounds of wastewater origin were present in four remote upland headwater lakes in Ireland that primarily receive loadings from atmospheric deposition. Using Polar Organic Chemical Integrative Samplers (POCIS) deployed in the lakes for 60 to 68 days, seven compounds were detected at levels that could be quantified but 25 of the target compounds were not detected. The detected compounds included the cannabinoid metabolite, tetrahydrocannabinol carboxylate (THC-COOH), codeine, acetaminophen (paracetamol), ibuprofen, and the artificial sweeteners, sucralose, and saccharin, which were all present at concentrations estimated to be < 125 ng/L. Caffeine was also present in the lakes at estimated concentrations between 213 and 1320 ng/L. Cocaine and tramadol were detected in POCIS deployed in some of the lakes, but at levels below the limits of quantitation. The highest concentrations of the target analytes were detected in two lakes located in the eastern part of Ireland. These data are consistent with regional atmospheric transport of these compounds originating from wastewater treatment plants in Ireland. However, contaminants from wastewater treatment plants in the United Kingdom may also be a source in these upland lakes that are located far from emissions of urban pollution.

A numerical modeling framework for simulating the key in-stream fate processes of PAH decay in Muskeg River Watershed, Alberta, Canada

Most previous water quality studies oversimplified in-stream processes for modeling the fate and transport of critical organic contaminants, such as Polycyclic Aromatic Hydrocarbons (PAHs). Taking four selected PAHs as representative organic contaminants, we developed a numerical modeling framework using a Water Quality Analysis Simulation Program 8 (WASP8) and a well-established watershed model, i.e., Soil and Water Assessment Tool (SWAT) to: (1) address the influence of in-stream processes, including direct photolysis, volatilization, partitioning of PAHs to suspended solids, and DOC complexation processes on PAH concentrations; and (2) establish relationships between spatiotemporal distribution of environmental factors (e.g., ice coverage, water temperature, wind, and light attenuation), in-stream processes, and PAH concentrations at a watershed scale. Using calibrated SWAT and WASP8 models, we evaluated the impacts of seasonal changes in environmental factors on in-stream processes in the Muskeg River watershed, which is part of the Athabasca Oil Sands Region (AOSR), the third-largest crude oil reserves of the world in western Canada. Among four selected PAHs, simulation results suggest that Naphthalene primarily decay in the water through volatilization or direct photolysis. For Phenanthrene, Pyrene, and Chrysene, DOC complexation, volatilization, and direct photolysis all contribute to their decay in the water, with a strong dependence on seasonality. Model simulations indicated that direct photolysis and volatilization rates are meager in cold seasons, mainly due to low river temperature and ice coverage. However, these processes gradually resume when entering the warm season. In summary, the model simulation results suggest that critical in-stream processes such as direct photolysis, volatilization, and partitioning and their relationship with environmental factors should be considered when simulating the fate and transport of organic contaminants in the river systems. Our results also reveal that the relationship between environmental factors and fate processes affecting PAH concentrations can vary across a watershed and in different seasons.

Exploring bacterial communities through metagenomics during bioremediation of polycyclic aromatic hydrocarbons from contaminated sediments

The goal of this study was to evaluate the degradation effectiveness of PAHs degrading bacteria at the mesocosm level, including Stenotrophomonas maltophilia (SC), mixed culture (MC), and enriched native microflora (EC) at the mesocosm level. Maximum degradation was found in the mesocosm MC (26.67 %), followed by SC (25.08 %) and EC (18.25 %) after 60 days. Thus, mixed culture and Stenotrophomonas maltophilia could be a game changer in the PAHs bioremediation at the chronically contaminated sites. MiSeq sequencing has revealed dominancy of γ-Proteobacteria, α-Proteobacteria, β-Proteobacteria at class level and Sphingomonadales, oceanospirillales, Rhodothermales at Order level. Families Alcanivoracaceae, Alteromonadaceae, Nocardiaceae, Rhodospirillaceae and genus Stenotrophomonas, Alcanivorax, Methylophaga, Fluviicola and Rhodoplanes were considerably increased which play key role in the PAHs degradation. Dominant bacterial communities have revealed resilience community to enable potential PAHs degradation process in all the mesocosms. To the best our knowledge this is the first ever attempt in PAHs biodegradation study conducted at the mesocosm level mimicking natural environmental conditions. Consequently, this study could be a benchmark against which future progress studies for the policy makers and stakeholders to design appropriate bioremediation study for the historically PAHs polluted contaminate sites.

Characterization, Behavior, and Risk Assessment of Polycyclic Aromatic Hydrocarbons (PAHs) in the Estuary Sediments

Polycyclic aromatic hydrocarbons (PAHs) are persistent toxic substances that have ubiquitous presence in water, air, soil, and sediment environments. The growth of PAH toxicities and related ecotoxicology risk in estuary sediment has a serious concern. Present study examined the PAHs concentration, sources, and ecological risk from selected sites in Subarnarekha River estuary (SRE) sediment deposits. The sum of toxic 16 PAHs was ranged from 36.8 to 670.8 ng/g (mean = 223.46 ± 196.35 ng/g). The total PAH concentration varied significantly among the sampling sites (range 511.3 ng/g to 233.8 ng/g) based on allochthonous contaminant loads. Among the 16 compounds, Phen had the highest concentration (40.18 ng/g), followed by Pye (31.86 ng/g), Flur (29.36 ng/g), and NA (19.33 ng/g). Most of the sampling sites contained abundant 3-ring and 4-5-ring PAHs. Based on diagnostic ratios and PCA analysis petroleum combustion, biomass, and coal-burning have been identified as the major sources. The PAHs had high mutagenic equivalent factor and toxic equivalent factor values posing great ecological threats and health risks.

State of the art and future challenges for polycyclic aromatic hydrocarbons is sediments: sources, fate, bioavailability and remediation techniques

Polycyclic aromatic hydrocarbons (PAHs) are amongst the most abundant contaminants found in the aquatic environment. Due to their toxicity and carcinogenicity, their sources, fate, behaviour, and cleanup techniques have been widely investigated in the last several decades. When entering the sediment-water system, PAH fate is determined by particular PAH and sediment physico-chemical properties. Most of the PAHs will be associated with fine-grained, organic-rich, sediment material. This makes sediment an ultimate sink for these pollutants. This association results in sediment contamination, and in this manner, sediments represent a permanent source of water pollution from which benthic organisms may accumulate toxic compounds, predominantly in lipid-rich tissues. A tendency for biomagnification can result in critical body burdens in higher trophic species. In recent years, researchers have developed numerous methods for measuring bioavailable fractions (chemical methods, non-exhaustive extraction, and biomimetic methods), as valuable tools in a risk-based approach for remediation or management of contaminated sites. Contaminated sediments pose challenging cleanup and management problems, as conventional environmental dredging techniques are invasive, expensive, and sometimes ineffective or hard to apply to large and diverse sediment sites. Recent studies have shown that a combination of strategies including in situ approaches is likely to provide the most effective long-term solution for dealing with contaminated sediments. Such in situ approaches include, but are not limited to: bioaugmentation, biostimulation, phytoremediation, electrokinetic remediation, surfactant addition and application of different sorbent amendments (carbon-rich such as activated carbon and biochar) that can reduce exposure and limit the redistribution of contaminants in the environment.

Polycyclic Aromatic Hydrocarbons (PAHs) in inland aquatic ecosystems: Perils and remedies through biosensors and bioremediation

Polycyclic Aromatic Hydrocarbons (PAHs) are among the most ubiquitous environmental pollutants of high global concern. PAHs belong to a diverse family of hydrocarbons with over one hundred compounds known, each containing at least two aromatic rings in their structure. Due to hydrophobic nature, PAHs tend to accumulate in the aquatic sediments, leading to bioaccumulation and elevated concentrations over time. In addition to their well-manifested mutagenic and carcinogenic effects in humans, they pose severe detrimental effects to aquatic life. The high eco-toxicity of PAHs has attracted a number of reviews, each dealing specifically with individual aspects of this global pollutant. However, efficient management of PAHs warrants a holistic approach that combines a thorough understanding of their physico-chemical properties, modes of environmental distribution and bioaccumulation, efficient detection, and bioremediation strategies. Currently, there is a lack of a comprehensive study that amalgamates all these aspects together. The current review, for the first time, overcomes this constraint, through providing a high level comprehensive understanding of the complexities faced during PAH management, while also recommending future directions through potentially viable solutions. Importantly, effective management of PAHs strongly relies upon reliable detection tools, which are currently non-existent, or at the very best inefficient, and therefore have a strong prospect of future development. Notably, the currently available biosensor technologies for PAH monitoring have not so far been compiled together, and therefore a significant focus of this article is on biosensor technologies that are critical for timely detection and efficient management of PAHs. This review is focussed on inland aquatic ecosystems with an emphasis on fish biodiversity, as fish remains a major source of food and livelihood for a large proportion of the global population. This thought provoking study is likely to instigate new collaborative approaches for protecting aquatic biodiversity from PAHs-induced eco-toxicity.

Distribution, sources and ecological risk assessment of PAHs in historically contaminated surface sediments at Bhavnagar coast, Gujarat, India

The concentration, distribution and ecological risk of polycyclic aromatic hydrocarbons (PAHs) have been investigated in surface sediments near Bhavnagar coast. The concentration of ∑PAHs ranged from 5.02 to 981.18 μg g(-1) dry weight, indicating heavy pollution compared to other historically polluted study sites. It was found to be introduced via mixed origins such as burning of gas, oil, coal, production of petrochemicals, cement, and rubber tires. Domestic fuel burning and motor vehicles are also culprits for air pollution. Industrial effluents and accidental oil spillage can also be considered. PAHs can be exposed through air, water, soil and food sources including ingestion, inhalation, and dermal content in both occupational and non-occupational levels by single or sometimes multiple exposures routes concomitantly. Furthermore, diagnostic ratios, statistical principal component analysis (PCA) and hierarchical cluster analysis (HCA) models have confirmed that the sources of PAHs were both - petrogenic and pyrogenic. For both the sites, assessment of ecological risk of the elevated levels of these pollutants has been exercised based on toxic equivalency factors (TEFs) and risk quotient (RQ) methods. The composite results indicated accurately that both the sites, bears potentially acute and chronic health hazards such as decreased immune functionality, genotoxicity, malignancy and developmental malfunctions in humans. The sites studied here and the workers have been exposed to hazardous pollutants for a longer period of time. Evidences indicate that mixtures of PAHs are carcinogenic to humans, based on occupational studies on workers, exposed to these pollutants. Hence, the present study and statistical approaches applied herein clearly indicate the historic mix routes of PAHs that resulted in magnified concentrations leading to high ecosystem risk. Thus, the scientific communities are urged to develop strategies to minimize the concentrations of PAHs from the historically impacted coastlines, thereby concerning for the future investigations and restoration of these sites.

An evaluation of the residual toxicity and chemistry of a sodium hydroxide-based ballast water treatment system for freshwater ships

Nonnative organisms in the ballast water of freshwater ships must be killed to prevent the spread of invasive species. The ideal ballast water treatment system (BWTS) would kill 100% of ballast water organisms with minimal residual toxicity to organisms in receiving waters. In the present study, the residual toxicity and chemistry of a BWTS was evaluated. Sodium hydroxide was added to elevate pH to >11.5 to kill ballast water organisms, then reduced to pH <9 by sparging with wet-scrubbed diesel exhaust (the source of CO2 ). Cladocerans (Ceriodaphnia dubia), amphipods (Hyalella azteca), and fathead minnows (Pimephales promelas) were exposed for 2 d to BWTS water under an air atmosphere (pH drifted to ≥9) or a 2.5% CO2 atmosphere (pH 7.5-8.2), then transferred to control water for 5 d to assess potential delayed toxicity. Chemical concentrations in the BWTS water met vessel discharge guidelines with the exception of concentrations of copper. There was little to no residual toxicity to cladocerans or fish, but the BWTS water was toxic to amphipods. Maintaining a neutral pH and diluting BWTS water by 50% eliminated toxicity to the amphipods. The toxicity of BWTS water would likely be minimal because of rapid dilution in the receiving water, with subsurface release likely preventing pH rise. This BWTS has the potential to become a viable method for treating ballast water released into freshwater systems.

Application of congener based multi-matrix profiling techniques to identify potential PCDD/F sources in environmental samples from the Burrishoole Catchment in the West of Ireland

Homologue and congener profiles of PCDD/Fs in eels, passive sampler and sediment extracts from the Burrishoole, a rural upland catchment on the western Irish seaboard were compared with potential PCDD sources. ΣPCDD/F levels in eels ranged from 2.9 to 25.9 pg g(-1) wet weight, which are elevated compared to other Irish locations. The OCDD congener dominated the pattern of ΣPCDD/Fs in all matrices from Burrishoole. Passive samplers were successfully deployed to identify for the first time the presence in the water column of PCDD/Fs and dimethoxylated octachlorodiphenyl ether (diMeOoctaCDE), impurities found in pentachlorophenol (PCP) production. Principal component analysis (PCA) identified similarities between PCDD/F profiles in technical PCP mixtures and environmental samples from the Burrishoole region. Results strongly suggest residual PCDD contamination associated with historic local use of a dioxin contaminated product in the catchment area, with pentachlorophenol a strong candidate.