Inverse melting transition and evidence of three-dimensional cubatic structure in a block-copolymer micellar system

Two liquid states of distinguishable helium-4: The existence of another non-superfluid frozen by heating

We show that two liquid states can exist in distinguishable helium-4 (4He) obeying Boltzmann statistics by path integral centroid molecular dynamics (CMD) simulations. This is an indication of quantum liquid polyamorphism induced by the nuclear quantum effect. For 0.08-3.3 K and 1-500 bar, we extensively conducted the isothermal-isobaric CMD simulations to explore not only possible states and state diagram but also the state characteristics. The distinguishable 4He below 25 bar does not freeze down to 0.1 K even though it includes no Bosonic exchange effect and, therefore, no Bose condensation. One liquid state, low quantum-dispersion liquid (LQDL), is nearly identical to normal liquid He-I of real 4He. The other is high quantum-dispersion liquid (HQDL) consisting of atoms with longer quantum wavelength. This is another non-superfluid existing below 0.5 K or the temperatures of LQDL. The HQDL is also a low-entropy and fragile liquid to exhibit, unlike conventional liquids, rather gas-like relaxation of velocity autocorrelation function, while there the atoms diffuse without noticeable contribution from quantum tunneling. The LQDL-HQDL transition is not a thermodynamic phase transition but a continuous crossover accompanied by the change in the expansion factor of quantum wavelength. Freezing of HQDL into the low quantum-dispersion amorphous solid occurs by heating from 0.2 to 0.3 K at 40-50 bar, while this P-T condition coincides with the Kim-Chan normal-supersolid phase boundary of real 4He. The obtained state diagram was compared to that of the confined subnano-scale 4He systems, where Bosonic correlation is considerably suppressed.

Dynamic Covalent Amphiphilic Polymer Conetworks Based on End-Linked Pluronic F108: Preparation, Characterization, and Evaluation as Matrices for Gel Polymer Electrolytes

We present the development of a platform of well-defined, dynamic covalent amphiphilic polymer conetworks (APCN) based on an α,ω-dibenzaldehyde end-functionalized linear amphiphilic poly(ethylene glycol)-b-poly(propylene glycol)-b-poly(ethylene glycol) (PEG-b-PPG-b-PEG, Pluronic) copolymer end-linked with a triacylhydrazide oligo(ethylene glycol) triarmed star cross-linker. The developed APCNs were characterized in terms of their rheological (increase in the storage modulus by a factor of 2 with increase in temperature from 10 to 50 °C), self-healing, self-assembling, and mechanical properties and evaluated as a matrix for gel polymer electrolytes (GPEs) in both the stretched and unstretched states. Our results show that water-loaded APCNs almost completely self-mend, self-organize at room temperature into a body-centered cubic structure with long-range order exhibiting an aggregation number of around 80, and display an exceptional room temperature stretchability of ∼2400%. Furthermore, ionic liquid-loaded APCNs could serve as gel polymer electrolytes (GPEs), displaying a substantial ion conductivity in the unstretched state, which was gradually reduced upon elongation up to a strain of 4, above which it gradually increased. Finally, it was found that recycled (dissolved and re-formed) ionic liquid-loaded APCNs could be reused as GPEs preserving 50-70% of their original ion conductivity.

Gelation Time of Network-Forming Polymer Solutions with Reversible Cross-Link Junctions of Variable Multiplicity

The gelation time tg necessary for a solution of functional (associating) molecules to reach its gel point after a temperature jump, or a sudden concentration change, is theoretically calculated on the basis of the kinetic equation for the stepwise cross-linking reaction as a function of the concentration, temperature, functionality f of the molecules, and multiplicity k of the cross-link junctions. It is shown that quite generally tg can be decomposed into the product of the relaxation time tR and a thermodynamic factor Q. They are functions of a single scaled concentration x≡λ(T)ϕ, where λ(T) is the association constant and ϕ is the concentration. Therefore, the superposition principle holds with λ(T) as a shift factor of the concentration. Additionally, they all depend on the rate constants of the cross-link reaction, and hence it is possible to estimate these microscopic parameters from macroscopic measurements of tg. The thermodynamic factor Q is shown to depend on the quench depth. It generates a singularity of logarithmic divergence as the temperature (concentration) approaches the equilibrium gel point, while the relaxation time tR changes continuously across it. Gelation time tg obeys a power law tg-1∼xn in the high concentration region, whose power index n is related to the multiplicity of the cross-links. The retardation effect on the gelation time due to the reversibility of the cross-linking is explicitly calculated for some specific models of cross-linking to find the rate-controlling steps in order for the minimization of the gelation time to be easier in the gel processing. For a micellar cross-linking covering a wide range of the multiplicity, as seen in hydrophobically-modified water-soluble polymers, tR is shown to obey a formula similar to the Aniansson-Wall law.

Rheological and Drug Delivery Characteristics of Poloxamer-Based Diclofenac Sodium Formulations for Chronic Wound Site Analgesia

Chronic wounds are a significant and growing health problem, and clinical treatment is often a painful experience. A topical dosage form would be optimal to treat this pain. Poloxamer 407, a thermosensitive polymer that is a liquid at low temperatures but gels at higher temperatures, is well suited to administer topical analgesics to chronic wound sites. The goal of this study was to evaluate the gelation and drug delivery properties of poloxamer 407 gels containing diclofenac sodium for potential use in chronic wound analgesic delivery. The gelation properties of poloxamer formulations were evaluated rheologically. Drug delivery properties of poloxamers loaded with diclofenac sodium were evaluated using snakeskin dialysis membranes, intact porcine ear skin, and porcine ear skin impaired via tape stripping. A commercial gel product and a solution of diclofenac sodium in water were used as control formulations. Poloxamer concentration and gelation temperature varied inversely, and the addition of higher concentrations of diclofenac sodium correlated to significant increases in poloxamer gelation temperature. Poloxamer solutions were effective in limiting the permeation of diclofenac sodium through membranes with impaired barrier properties, and delivery of diclofenac sodium from poloxamer 407 did not vary significantly from delivery observed from the commercial gel product. The amount of drug delivered in 24 h did not change significantly with changes in poloxamer 407 concentration. The results of this study indicate that poloxamer 407 may be a useful formulation component for administration of an analgesic product to a chronic wound site.

Thermoresponsive polymers and their biomedical application in tissue engineering - a review

Thermoresponsive polymers hold great potential in the biomedical field, since they enable the fabrication of cell sheets, in situ drug delivery and 3D-printing under physiological conditions. In this review we provide an overview of several thermoresponsive polymers and their application, with focus on poly(N-isopropylacrylamide)-surfaces for cell sheet engineering. Basic knowledge of important processes like protein adsorption on surfaces and cell adhesion is provided. For different thermoresponsive polymers, namely PNIPAm, Pluronics, elastin-like polypeptides (ELP) and poly(N-vinylcaprolactam) (PNVCL), synthesis and basic chemical and physical properties have been described and the mechanism of their thermoresponsive behavior highlighted. Fabrication methods of thermoresponsive surfaces have been discussed, focusing on PNIPAm, and describing several methods in detail. The latter part of this review is dedicated to the application of the thermoresponsive polymers and with regard to cell sheet engineering, the process of temperature-dependent cell sheet detachment is explained. We provide insight into several applications of PNIPAm surfaces in cell sheet engineering. For Pluronics, ELP and PNVCL we show their application in the field of drug delivery and tissue engineering. We conclude, that research of thermoresponsive polymers has made big progress in recent years, especially for PNIPAm since the 1990s. However, manifold research possibilities, e.g. in surface fabrication and 3D-printing and further translational applications are conceivable in near future.

Hydration dynamics in aqueous Pluronic P123 solution: Concentration and temperature dependence

Here, we report the concentration (0 ≤ wt. % ≤ 30) and temperature (293 ≤ T/K ≤ 318) dependent structural and dynamical changes in an aqueous solution of a triblock copolymer (Pluronic P123) using dielectric relaxation spectroscopy (DRS), covering a frequency regime, 0.2 ≤ ν/GHz ≤ 50. Remarkable existence of slow water molecules, ∼2 times slower than bulk type water, along with bulk-like water molecules has been detected in the present DR measurements. Differential scanning calorimetric measurements support this DR observation. The signature of the sol-gel phase transition (∼15.0 wt. %, 293 K) and temperature induced extensive dehydration (>60%) for P123 molecules, which are the other notable findings of the present work. Moreover, the rate of dehydration with temperature has been found to depend on the phase of the medium. However, dehydration follows a nonlinear pattern in both sol and gel phases. A subnanosecond (∼90 ps) component, possibly originating from the hydrogen bond relaxation dynamics of the terminal C-O-H of polymer chains, has also been observed.

Synthesis of Prolate-Shaped Au Nanoparticles and Au Nanoprisms and Study of Catalytic Reduction Reactions of 4-Nitrophenol

The growth into anisotropic one or two dimensions is important in plasmonic gold nanomaterials because extinction occurs along multiple axes and sometimes the resonance extends to the near-infrared region. The surfactant mixture of cetyltrimethylammonium bromide (CTAB) and Pluronic triblock copolymers has been recently demonstrated to be efficient anisotropic soft templates for the growth of noble metal nanomaterials. Seed-mediated growth of two types of anisotropic Au nanoparticles is achieved in this study. One is one-dimensional prolate-shaped Au nanoparticles with the average aspect ratios of 2.29 and 2.59, and the other is two-dimensional gold nanoprisms with the average edge length of 50.4 nm. These anisotropic structures are believed to be produced by the tendency of Pluronic copolymers to be micellized anisotropically at the elevated temperatures and by the preference for being lamellar mesophases in the phase diagrams when the concentration is highest. When prepared in the surfactant mixture of CTAB and L-64 (17.9%), Au nanoparticles containing spherical particles (27.9 nm) as the major products show the best catalytic performances in the reduction reactions of 4-nitrophenol.

Ag(i)-mediated self-assembly of anisotropic rods and plates in the surfactant mixture of CTAB and Pluronics

One-dimensional (1D) metallogels are commonly observed in metal-coordinated complexes, but there are not many examples of soft crystalline solids which are generated by the self-assembly of metal–polymer complexation in a non-gel state. In a continued effort to obtain 1D materials by utilizing the tendency of Pluronic triblock copolymers to be micellized anisotropically at an elevated temperature, we investigate Ag(i)-mediated self-assembly of the surfactant mixture of Pluronic copolymers and cetyltrimethylammonium bromide (CTAB). At sufficiently high temperature, Pluronic copolymers are known to organize into many crystalline mesophases, such as body-centered-cubic, hexagonal, and lamellar phases. Four Pluronics of L-31, L-64, P-123, and F-108 were studied, and at the concentration of 17.9%, macroscale 1D rods with the aspect ratios ranging from 3.07 to 12.8 are obtained. At the concentration of 35.7%, anisotropic two dimensional (2D) planar plates are observed. These planar structures were believed to be generated from 2D lamellar mesophases, which is consistent with the general phase diagram of Pluronic copolymers that shows lamellar phase with the highest concentration. In the absence of ascorbic acid, rods and plates of larger size are produced. Rather than as a reductant, ascorbic acid is thought to play the roles of an agent to increase the hydrophilicity, and as a mediator to determine the dimension of rods and plates by hindering the long range self-assembly of alkyl chains. Dehydration by the addition of AgNO₃, and the increase of hydrophobicity enable self-assembly of alkyl groups of CTAB and Pluronics and promote the formation of crystalline soft solids.

Macroscale anisotropic rods and plates were generated by the self-assembly of CTAB and Pluronics in the presence of AgNO₃.

Hard Pd Nanorods in the Soft Surfactant Mixture of CTAB and Pluronics: Seedless Synthesis and Their Self-Assembly

Seedless synthesis of Pd nanorods and their self-assembly into the layered smectic ordering are described. Aqueous Pluronic triblock copolymers (14.3-35.7%) are used as a soft template along with cetyltrimethylammonium bromide for inducing one-dimensional growth of Pd nanorods. Pluronic triblock copolymers are probably the most used polymer surfactants, and they are composed of poly(ethylene oxide) (PEO)-poly(propylene oxide) (PPO)-PEO triblocks. Neither pH adjustment nor AgNO₃ and other additives, such as poly(vinyl pyrrolidone) and ethylene glycol, are required to obtain Pd nanorods. Sonochemical synthesis at 43 °C, followed by thermal annealing for 1 h at 65 °C produces Pd nanorods with the aspect ratio from 3.1 (17.9%, Pluronic L-64) to 6.7 (35.7%, Pluronic P-123). Two-dimensional self-assembly of the nanorods is observed, and both nematic ordering between the mesogens and smectic ordering between the layers is identified. Micellar hydrophobic PPO with hydrated PEO coronas are known to self-assemble into many crystalline orders, including cubic, hexagonal, lamellar, and inverse hexagonal mesophases, which extend into cylindrical micelles with increasing temperature. Relatively small size of Pluronic copolymers with regard to general polymers, but rather large size of their micelles and their tendency to organize into crystalline mesophases are thought to contribute to the anisotropic growth of Pd nanorods.

Re-entrant supramolecular interactions in inverse-melting α-cyclodextrin·4-methylpyridine·water mixtures: an NMR study

Inverse freezing αCD·4MP·H₂O turns into a gel as αCD loses its solvation shell. First, it loses its interaction with 4MP, and then its solvation by water.

Gels Obtained by Colloidal Self-Assembly of Amphiphilic Molecules

Gelation in water-based systems can be achieved in many different ways. This review focusses on ways that are based on self-assembly, i.e., a bottom-up approach. Self-assembly naturally requires amphiphilic molecules and accordingly the systems described here are based on surfactants and to some extent also on amphiphilic copolymers. In this review we are interested in cases of low and moderate concentrations of amphiphilic material employed to form hydrogels. Self-assembly allows for various approaches to achieve gelation. One of them is via increasing the effective volume fraction by encapsulating solvent, as in vesicles. Vesicles can be constructed in various morphologies and the different cases are discussed here. However, also the formation of very elongated worm-like micelles can lead to gelation, provided the structural relaxation times of these systems is long enough. Alternatively, one may employ amphiphilic copolymers of hydrophobically modified water soluble polymers that allow for network formation in solution by self-assembly due to having several hydrophobic modifications per polymer. Finally, one may combine such polymers with surfactant self-assemblies and thereby produce interconnected hybrid network systems with corresponding gel-like properties. As seen here there is a number of conceptually different approaches to achieve gelation by self-assembly and they may even become combined for further variation of the properties. These different approaches are described in this review to yield a comprehensive overview regarding the options for achieving gel formation by self-assembly.

Thermochromic Ion-Exchange Micelles Containing H+ Chromoionophores

Thermochromic composites constitute a classical subfamily of stimuli responsive materials. We report here the thermochromic effect in Pluronic F-127 (F127) micelles containing hydrophobic ion-exchanger and H⁺ chromoionophores. The highly versatile and reversible thermochromism is attributed to the temperature-induced hydration-dehydration of the peripheral layer of the micelles, which in turn controls the ion-exchange process between the core and the periphery of the micelles. The color typically changes abruptly within 3-5 °C, and the color transition temperature can be tuned within 5-25 °C upon varying the F127 concentrations. This work lays the foundation of a new variety of thermochromic materials involving ion-exchange.

Melting upon cooling and freezing upon heating: fluid-solid phase diagram for Švejk-Hašek model of dimerizing hard spheres

A simple model of dimerizing hard spheres with highly nontrivial fluid-solid phase behavior is proposed and studied using the recently proposed resummed thermodynamic perturbation theory for central force (RTPT-CF) associating potentials. The phase diagram has the fluid branch of the fluid-solid coexistence curve located at temperatures lower than those of the solid branch. This unusual behavior is related to the strong dependence of the system excluded volume on the temperature, which for the model at hand decreases with increasing temperature. This effect can be also seen for a wide family of fluid models with an effective interaction that combines short range attraction and repulsion at a larger distance. We expect that for sufficiently high repulsive barrier, such systems may show similar phase behavior.

Treatment of otitis media by transtympanic delivery of antibiotics

Otitis media is the most common reason U.S. children receive antibiotics. The requisite 7- to 10-day course of oral antibiotics can be challenging to deliver in children, entails potential systemic toxicity, and encourages selection of antimicrobial-resistant bacteria. We developed a drug delivery system that, when applied once to the tympanic membrane through the external auditory canal, delivers an entire course of antimicrobial therapy to the middle ear. A pentablock copolymer poloxamer 407-polybutylphosphoester (P407-PBP) was designed to flow easily during application and then to form a mechanically strong hydrogel on the tympanic membrane. U.S. Food and Drug Administration-approved chemical permeation enhancers within the hydrogel assisted flux of the antibiotic ciprofloxacin across the membrane. This drug delivery system completely eradicated otitis media from nontypable Haemophilus influenzae (NTHi) in 10 of 10 chinchillas, whereas only 62.5% of animals receiving 1% ciprofloxacin alone had cleared the infection by day 7. The hydrogel system was biocompatible in the ear, and ciprofloxacin was undetectable systemically (in blood), confirming local drug delivery and activity. This fast-gelling hydrogel could improve compliance, minimize side effects, and prevent systemic distribution of antibiotics in one of the most common pediatric illnesses, possibly minimizing the development of antibiotic resistance.

Transport of nanoparticulate material in self-assembled block copolymer micelle solutions and crystals

Water soluble poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) [PEO–PPO–PEO] triblock copolymers self-assemble into thermoreversible micellar crystals comprised of periodically spaced micelles. The micelles have PPO cores surrounded by hydrated PEO coronas and the dimensions of the unit cell of the organized micelles is on the order of several to tens of nanometers. Fluorescence recovery after photobleaching (FRAP) is used to quantify nanoparticle transport in these nanostructured polymer micelle systems. Diffusivity of bovine serum albumin (BSA, D_h ∼ 7 nm) is quantified across a wide range of polymer, or micelle, concentrations covering both the disordered fluid as well as the structured micellar crystal to understand the effects of nanoscale structure on particle transport. Measured particle diffusivity in these micellar systems is reduced by as much as four orders of magnitude when compared to diffusivity in free solution. Diffusivity in the disordered micellar fluid is best understood in terms of diffusion through a polymeric solution, while transport in the structured micellar phase is possibly due to hopping between interstitial sites. These results not only show that the nanoscale structures of the micelles have a measureable impact on particle diffusivity, but also demonstrate the ability to tune nanoscale transport in self-assembled materials.

Selective tuning of the self-assembly and gelation of a hydrophilic poloxamine by cyclodextrins

Complexes formed between cyclodextrins (CDs) and polymers - pseudopolyrotaxanes (PPRs) - are the starting point of a multitude of supramolecular structures, which are proposed for a wide range of biomedical and technological applications. In this work, we investigate the complexation of a range of cyclodextrins with Tetronic T1307, a four-arm block copolymer of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) with a pH-responsive central ethylene diamine spacer, and its impact on micellization and the sol-gel transition. At low concentrations, small-angle neutron scattering (SANS) combined with dynamic light scattering (DLS) measurements show the presence of spherical micelles with a highly hydrated shell and a dehydrated core. Increasing the temperature leads to more compact micelles and larger aggregation numbers, whereas acidic conditions induce a shrinking of the micelles, with fewer unimers per micelle and a more hydrated corona. At high concentrations, T1307 undergoes a sol-gel transition, which is suppressed at pH below the pKa,1 (4.6). SANS data analysis reveals that the gels result from a random packing of the micelles, which have an increasing aggregation number and increasingly dehydrated shell and hydrated core with the temperature. Native CDs (α, β, γ-CD) can complex T1307, resulting in the precipitation of a PPR. Instead, modified CDs compete with micellization to an extent that is critically dependent on the nature of the substitution. (1)H and ROESY NMR combined with SANS demonstrate that dimethylated β-CD can thread onto the polymer, preferentially binding to the PO units, thus hindering self-aggregation by solubilizing the hydrophobic block. The various CDs are able to modulate the onset of gelation and the extent of the gel phase, and the effect correlates with the ability of the CDs to disrupt the micelles, with the exception of a sulfated sodium salt of β-CD, which, while not affecting the CMT, is able to fully suppress the gel phase.

TBP induced double cloud point in aqueous EO13PO30EO13 solutions: investigating the evolution of associated micellar characteristics as a function of temperature

TBP solubilized Pluronic L64 solutions exhibit inter-micellar attraction driven micellar cluster formation upon cooling, which is unique in non-ionic micellar systems.

Temperature dependent cubic and hexagonal close packing in micellar structures

The interfacial structure and phase diagram of a micellar solution formed by the three block copolymer (EO20-PO70-EO20) also known as P123 solved in deuterated water close to a solid boundary is investigated with respect to temperature. We find a hysteretic behavior of the d-spacing of the micellar crystal and a spontaneous change in the lateral correlation length going hand in hand with a structural reorganization between cubic and hexagonal. The phase transitions may be initiated by a change in the shape of the micelles from spherical to elongated together with a minimization of the polymer water interface.

Mesoscopic simulation of phase behaviors and structures in an amphiphile-solvent system

We have performed a three-dimensional simulation of mesoscopic structures in a mixture of AB amphiphilic molecule and C solvent by employing the density-functional theory under the conditions that (i) the size of the AB is much larger than C and (ii) the affinity between A and B is much larger than the affinity between B and C. First, we have calculated the free energy of five periodic structures, i.e., the lamellar phase, hexagonally packed cylinders, body-centered-cubic spheres, face-centered-cubic spheres, and gyroid phase for different sets of the concentration of AB (ϕ[over ¯]_{AB}) and the χ parameter (χ_{AC}). By comparing the free energies for these structures, the χ_{AC}-ϕ[over ¯]_{AB} phase diagram has been obtained. In addition to these periodic structures, it has been shown that nonperiodic structures such as spherical and rodlike micelles can be obtained although they might be metastable phase.

Temperature-induced attractive interactions of PEO-containing block copolymer micelles

Interactions in a temperature sensitive-colloidal model system are investigated over a wide range of temperatures and concentrations to characterize the interparticle interactions within the system. This model system is composed of poly(ethylene oxide) end-capped with an octadecyl chain (C18E100), which by small-angle X-ray scattering (SAXS) have been shown to form spherical micelles in an aqueous salt solution. In the present study a 0.9 M NaF solution is used to shift the cloud point into the experimentally convenient temperature range. Densitometry and SAXS have shown no indication of specific interactions between the salt ions and the micelles. The spherical micelles are found to persist at elevated temperatures and a change in interparticle interaction is observed by viscometry and SAXS. The results are all consistent with the decreased solvent quality of water toward poly(ethylene oxide) with increasing temperature and it is seen that attractive interparticle interactions emerge in the vicinity of the cloud point.

Combined neutron reflectometry and rheology

Neutron reflectometry has been combined with rheology in order to investigate the solid boundary of liquids and polymers under shear deformation. This approach allows one to apply a controlled stress to a material while resolving the structural arrangements on the sub-nanometre length scale with neutron reflectivity, off-specular scattering and small-angle scattering at the same time. The specularly reflected neutron intensity of a 20% by weight solution of Pluronic F127 in deuterated water in contact with an octadecyl trichlorosilane-covered and a piranha-treated silicon wafer is evaluated. A pronounced difference is found in the structure formed by the polymer micelles at the two surfaces, which is explained by the difference in the affinity of the micellar shell to the solid interfaces. Under deformation, the near interface structure changes at deformations of about 2, 30 and 900%. The structural changes are correlated with changes in the storage and loss modulus of the polymer solution, revealing a transition from more solid to more liquid like properties.

Encapsulation of hydrophobic drugs in Pluronic F127 micelles: effects of drug hydrophobicity, solution temperature, and pH

Three drugs, ibuprofen, aspirin, and erythromycin, are encapsulated in spherical Pluronic F127 micelles. The shapes and the size distributions of the micelles in dilute, aqueous solutions, with and without drugs, are ascertained using cryo-scanning electron microscopy and dynamic light scattering (DLS) experiments, respectively. Uptake of drugs above a threshold concentration is seen to reduce the critical micellization temperature of the solution. The mean hydrodynamic radii and polydispersities of the micelles are found to increase with decrease in temperature and in the presence of drug molecules. The hydration of the micellar core at lower temperatures is verified using fluorescence measurements. Increasing solution pH leads to the ionization of the drugs incorporated in the micellar cores. This causes rupture of the micelles and release of the drugs into the solution at the highest solution pH value of 11.36 investigated here and is studied using DLS and fluorescence spectrocopy.

Solubilization of parabens in aqueous Pluronic solutions: investigating the micellar growth and interaction as a function of paraben composition

The influence of methyl paraben (MP) and butyl paraben (BP) on the aggregation characteristics of Pluronics in an aqueous medium has been investigated by DLS, SANS, viscometry, and fluorescence measurement techniques. Parabens are extensively used as preservatives in cosmetic, pharmaceutical, and food products. In this paper, we show that their influence on the restructuring and growth of Pluronics micelles vary quite significantly with their aqueous solubility and with the composition of Pluronics. In the case of P105 and P104, MP reduces the sphere-to-rod transition temperature down to room temperature, but BP with significantly less aqueous solubility than MP suppresses such micellar transition and leads to the formation of micellar clusters due to the onset of intermicellar attractive interaction. In the case of more hydrophobic Pluronic P103, on the other hand, both MP and BP are able to induce rapid room temperature sphere-to-rod micellar growth, which is not observed in the presence of water structure making salts like NaCl and Na(3)PO(4). These observations have been attributed to modulation of growth and restructuring processes of the Pluronic micelles arising due to different locations of parabens within the micellar corona as determined by their aqueous solubility and the hydrophobicity of the Pluronics.

Thermogelling properties of triblock copolymers in the presence of hydrophilic Fe3O4 nanoparticles and surfactants

We investigate the supramolecular structure formed by thermogelation of a triblock polymer in the presence of nanoparticles and surfactant using rheometry and small-angle X-ray scattering (SAXS). The triblock copolymer, nanoparticle, and surfactant used in this study are poly(oxyethylene-oxypropylene-oxyethylene), Pluronic F108, Fe(3)O(4) nanoparticles, and sodium dodecyl surfactant, respectively. Addition of 1-5 wt % of Fe(3)O(4) nanoparticle, of average particle size ~10 nm, in a weak template of F108 (15 wt %) shows a decrease in the onset of gelation temperature and dramatic alteration in the viscoelastic moduli. The nanocomposite samples show a linear viscoelastic regime up to 5% strain. The SAXS measurement shows that the intermicellar spacing of the supramolecular structure of pure F108 is ~16.5 nm, and the supramolecular structure is destroyed when nanoparticles and surfactants are incorporated in it. Further, the addition of anionic surfactant to nanocomposites leads to a dramatic reduction in the viscoelastic properties due to strong electrostatic barrier imparted by the surfactant headgroup that prevents the formation of hexagonally ordered micelles. Our results show that the thermogelation is due to the clustering of nanoparticles into a fractal network rather than a close-packed F108 micelles, in agreement with the recent findings in Pluronic F127-laponite systems.

Structure of nanoparticles embedded in micellar polycrystals

We investigate by scattering techniques the structure of water-based soft composite materials comprising a crystal made of Pluronic block-copolymer micelles arranged in a face-centered cubic lattice and a small amount (at most 2% by volume) of silica nanoparticles, of size comparable to that of the micelles. The copolymer is thermosensitive: it is hydrophilic and fully dissolved in water at low temperature (T ~ 0 °C), and self-assembles into micelles at room temperature, where the block-copolymer is amphiphilic. We use contrast matching small-angle neuron scattering experiments to independently probe the structure of the nanoparticles and that of the polymer. We find that the nanoparticles do not perturb the crystalline order. In addition, a structure peak is measured for the silica nanoparticles dispersed in the polycrystalline samples. This implies that the samples are spatially heterogeneous and comprise, without macroscopic phase separation, silica-poor and silica-rich regions. We show that the nanoparticle concentration in the silica-rich regions is about 10-fold the average concentration. These regions are grain boundaries between crystallites, where nanoparticles concentrate, as shown by static light scattering and by light microscopy imaging of the samples. We show that the temperature rate at which the sample is prepared strongly influence the segregation of the nanoparticles in the grain-boundaries.

"Pore-Like" Effects of Super-Molecular Self-Assembly on Molecular Diffusion of Poly(Ethylene Oxide)-Poly(Propylene Oxide)-Poly(Ethylene Oxide) in Water

Molecular diffusion of triblock copolymers poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) in water was studied with the help of Pulsed Field Gradient NMR in the broad range of polymer weight fractions from 0.09 to 0.8. Owing to amphiphilic nature of the molecules, these block copolymers exhibit rich self-organization properties when mixed with water. In particular, at ambient temperatures they form micelles and three liquid crystalline mesophases: cubic, hexagonal, and lamellar. The corresponding super-molecular structure formations were studied with the same block copolymer and at the same temperature. Self-assembly of molecules was shown to produce "pore-like" effects on their self-diffusion properties by imposing severe constraints on the dimensionality of propagation. Diffusion in the hexagonal phase was shown to be quasi one-dimensional in the direction parallel to the long axis of the ordered molecular rods. In the lamellar phase, diffusion was found to be quasi two-dimensional, in the plane of the lamellar structures. The observed diffusion anisotropy was attributed to the effects of the specific molecular ordering on the mesoscopic length scale.

Tuning of thermally induced sol-to-gel transitions of moderately concentrated aqueous solutions of doubly thermosensitive hydrophilic diblock copolymers poly(methoxytri(ethylene glycol) acrylate)-b-poly(ethoxydi(ethylene glycol) acrylate-co-acrylic acid)

We report in this article a method to tune the sol-to-gel transitions of moderately concentrated aqueous solutions of doubly thermosensitive hydrophilic diblock copolymers that consist of two blocks exhibiting distinct lower critical solution temperatures (LCSTs) in water. A small amount of weak acid groups is statistically incorporated into the lower LCST block so that its LCST can be tuned by varying solution pH. Well-defined diblock copolymers, poly(methoxytri(ethylene glycol) acrylate)-b-poly(ethoxydi(ethylene glycol) acrylate-co-acrylic acid) (PTEGMA-b-P(DEGEA-co-AA)), were prepared by reversible addition-fragmentation chain transfer polymerization and postpolymerization modification. PTEGMA and PDEGEA are thermosensitive water-soluble polymers with LCSTs of 58 and 9 °C, respectively, in water. A 25 wt % aqueous solution of PTEGMA-b-P(DEGEA-co-AA) with a molar ratio of DEGEA to AA units of 100:5.2 at pH = 3.24 underwent multiple phase transitions upon heating, from a clear, free-flowing liquid (<15 °C) to a clear, free-standing gel (15-46 °C) to a clear, free-flowing hot liquid (47-56 °C), and a cloudy mixture (≥57 °C). With the increase of pH, the sol-to-gel transition temperature (T(sol-gel)) shifted to higher values, while the gel-to-sol transition (T(gel-sol)) and the clouding temperature (T(clouding)) of the sample remained essentially the same. These transitions and the tunability of T(sol-gel) originated from the thermosensitive properties of two blocks of the diblock copolymer and the pH dependence of the LCST of P(DEGEA-co-AA), which were confirmed by dynamic light scattering and differential scanning calorimetry studies. Using the vial inversion test method, we mapped out the C-shaped sol-gel phase diagrams of the diblock copolymer in aqueous buffers in the moderate concentration range at three different pH values (3.24, 5.58, and 5.82, all measured at ~0 °C). While the upper temperature boundaries overlapped, the lower temperature boundary shifted upward and the critical gelation concentration increased with the increase of pH. The AA content in PTEGMA-b-P(DEGEA-co-AA) was found to have a significant effect on the pH dependence of T(sol-gel). For PTEGMA-b-P(DEGEA-co-AA) with a molar ratio of DEGEA to AA units of 100:10, the T(sol-gel) of its 25 wt % aqueous solution increased faster with the increase of pH than that of PTEGMA-b-P(DEGEA-co-AA) with a DEGEA-to-AA molar ratio of 100:5.2.