Ferroelectric order of parallel bistable hydrogen bonds

The past 10 years of molecular ferroelectrics: structures, design, and properties

Ferroelectricity, which has diverse important applications such as memory elements, capacitors, and sensors, was first discovered in a molecular compound, Rochelle salt, in 1920 by Valasek. Owing to their superiorities of lightweight, biocompatibility, structural tunability, mechanical flexibility, etc., the past decade has witnessed the renaissance of molecular ferroelectrics as promising complementary materials to commercial inorganic ferroelectrics. Thus, on the 100th anniversary of ferroelectricity, it is an opportune time to look into the future, specifically into how to push the boundaries of material design in molecular ferroelectric systems and finally overcome the hurdles to their commercialization. Herein, we present a comprehensive and accessible review of the appealing development of molecular ferroelectrics over the past 10 years, with an emphasis on their structural diversity, chemical design, exceptional properties, and potential applications. We believe that it will inspire intense, combined research efforts to enrich the family of high-performance molecular ferroelectrics and attract widespread interest from physicists and chemists to better understand the structure-function relationships governing improved applied functional device engineering.

Carrier Transport Switching of Ferroelectric BTBT Derivative

Alkylamide-substituted [1]benzothieno[3,2-b][1]benzothiophene (BTBT) derivative of BTBT-NHCOC14H29 (1), which has ferroelectric N-H···O= hydrogen-bonding network of alkylamide group and two-dimensional (2D) electric structure of BTBT π-cores, was prepared to design the external electric field-responsive organic semiconductors. The short-chain derivative of BTBT-NHCOC3H7 (1') revealed the coexistence of a 2D electronic band structure based on the herringbone BTBT arrangement and the one-dimensional (1D) hydrogen-bonding chain. 1 formed a smectic E (SmE) liquid crystal phase above 412 K and showed ferroelectric hysteresis in the electric field-polarization (P-E) curves at 403-433 K. The remanent polarization (Pr) and coercive electric field (Ec) of 1 at 408 K, 0.1 Hz were 24.0 μC cm-2 and 5.54 V μm-1, respectively. By thermal annealing of thin-film 1 at 443 K, the molecular assembly structure of 1 changed from a monolayer to a bilayer structure with high crystallinity, resulting in conducting layers of BTBT parallel to the substrate surface. The organic field-effect transistor (OFET) device with thermally annealed thin-film 1 showed p-type semiconducting behavior with the hole mobility of 1.0 × 10-3 cm2 V-1 s-1. Furthermore, device 1 showed switching behavior of semiconducting properties by electric field poling and thermal annealing cycle. The electric field response of ferroelectrics modulated the molecular orientation and conduction properties of organic semiconductors, resulting in external electric field control of carrier transport properties.

The First Ring Enlargement Induced Large Piezoelectric Response in a Polycrystalline Molecular Ferroelectric

Inorganic ferroelectrics have long dominated research and applications, taking advantage of high piezoelectric performance in bulk polycrystalline ceramic forms. Molecular ferroelectrics have attracted growing interest because of their environmental friendliness, easy processing, lightweight, and good biocompatibility, while realizing the considerable piezoelectricity in their bulk polycrystalline forms remains a great challenge. Herein, for the first time, through ring enlargement, a molecular ferroelectric 1-azabicyclo[3.2.1]octonium perrhenate ([3.2.1-abco]ReO4 ) with a large piezoelectric coefficient d33 up to 118 pC/N in the polycrystalline pellet form is designed, which is higher than that of the parent 1-azabicyclo[2.2.1]heptanium perrhenate ([2.2.1-abch]ReO4 , 90 pC/N) and those of most molecular ferroelectrics in polycrystalline or even single crystal forms. The ring enlargement reduces the molecular strain for easier molecular deformation, which contributes to the higher piezoelectric response in [3.2.1-abco]ReO4 . This work opens up a new avenue for exploring high piezoelectric polycrystalline molecular ferroelectrics with great potential in piezoelectric applications.

A straightforward method using the sign of the piezoelectric coefficient to identify the ferroelectric switching mechanism

Some organic ferroelectrics have two possible switching modes: molecular reorientation and proton transfer. Typical examples include 2,5-dihydroxybenzoic acid (DHBA) and Hdabco-ReO[Formula: see text] (dabco = diazabicyclo[2.2.2]octane). The direction and amplitude of the expected polarization depends on the switching mode. Herein a straightforward method to identify the ferroelectric switching mechanism is demonstrated. First, the relationship between the polarization vectors corresponding to the two modes is illustrated using the Berry phase. Second, the theoretical background for the sign of the piezoelectric coefficient is used to decide which mode occurs. Finally, comparing the theoretically calculated piezoelectric coefficients to the experimental results confirms the switching mode of each compound.

Photochromic Single-Component Organic Fulgide Ferroelectric with Photo-Triggered Polarization Response

Organic photochromic compounds have been widely investigated for optical memory storage and switches. Very recently, we pioneeringly discovered optical control of ferroelectric polarization switching in organic photochromic salicylaldehyde Schiff base and diarylethene derivatives, differently from the traditional ferroelectrics. However, the study of such intriguing photo-triggered ferroelectrics is still in its infancy and relatively scarce. In this manuscript, we synthesized a pair of new organic single-component fulgide isomers, (E and Z)-3-(1-(4-(tert-butyl)phenyl)ethylidene)-4-(propan-2-ylidene)dihydrofuran-2,5-dione (1E and 1Z). They undergo prominent photochromism from yellow to red. Interestingly, only polar 1E has been proven to be ferroelectric, while the centrosymmetric 1Z does not meet the basic requirement for ferroelectricity. Besides, experimental evidence shows that the Z-form can be converted to the E-form by light irradiation. More importantly, the ferroelectric domains of 1E can be manipulated by light in the absence of an electric field, benefiting from the remarkable photoisomerization. 1E also adopts good fatigue resistance to the photocyclization reaction. As far as we know, this is the first example of organic fulgide ferroelectric reported with photo-triggered ferroelectric polarization response. This work has developed a new system for studying photo-triggered ferroelectrics and would also provide an expected perspective on developing ferroelectrics for optical applications in trap future.

Ab Initio Study of H-Bond Dynamics in Three-Component Crystals Comprising (DABCOH+ )n Polycationic Chains

In this work, the dynamic character of hydrogen-bond (H-bond) networks in two three-component crystals comprising polycationic chains was described. The first studied system was 1,4-diazabicyclo[2.2.2]octan-1-ium (DABCOH⁺ ) sulfamate monohydrate, known for its large negative linear compressibility. The second analyzed material was the newly obtained polar salt co-crystal: 1,4-diazabicyclo[2.2.2]octan-1-ium sulfamate urea. X-ray diffraction measurements enabled us to study the H-bond systems in both crystals using the graph set analysis. Obtained structures served as the initial models for Born-Oppenheimer molecular dynamics computations. A detailed study of intermolecular interactions and power spectra was conducted. The analysis of time and space correlations between the changes in H-bonds enabled the detection of proton transfer occurring in both systems at 300 K. Further study of those dynamic phenomena was done using the Energy Decomposition Analysis for selected trajectory fragments. Our work should improve the understanding of dielectric and ferroelectric properties of hybrid organic-inorganic materials.

Precise design and preparation of two 3D organic-inorganic perovskite ferroelectrics (1,5-diazabicyclo[3.2.2]nonane)RbX3 (X = Br, I)

Compared with the spherical molecule 1,4-diazoniabicyclo[2.2.2]-octane (2.2.2-dabco), 1,5-diazabicyclo[3.2.2]nonane (3.2.2-dabcn) bears a lower symmetry and larger size. As expected, reactions of 3.2.2-dabcn with rubidium halides gave two 3D molecular ferroelectrics [3.2.2-H₂dabcn]RbX₃ (X = Br for 1; X = I for 2) with T_c at 342 K (1) and 293 K (2).

Ferroelectric coordination metal complexes based on structural and electron dynamics

Ferroelectrics that display electrically invertible polarisation are attractive materials because of their potential for wide-ranging applications. To date, considerable effort has thus been devoted towards developing ferroelectric materials, particularly those comprising organic/inorganic compounds. In these systems, structural dynamics such as atomic displacement and reorientation of polar ions/molecules play a key role in the generation of reversible spontaneous polarisation. Although there are many reports concerned with organic/inorganic ferroelectrics, ferroelectrics based on coordination metal complexes have been largely unexplored despite their often unique electronic and spin state properties. In this feature article, we discuss recent progress involving coordination metal complex-based ferroelectrics where the reversible polarisation originates not only from structural dynamics (represented by proton transfer, molecular motion, and liquid crystalline behaviour) but also from electron dynamics (represented by electron transfer and spin crossover phenomena) occurring at the metal centre. Furthermore, unique synergy effects (i.e. magnetoelectric coupling) resulting from the structural and electron dynamics are described. We believe that this review pertaining to ferroelectric coordination metal complexes provides new insights for fabricating further advanced functional materials such as multiferroics and spintronics.

Contactless Manipulation of Write-Read-Erase Data Storage in Diarylethene Ferroelectric Crystals

The optical manipulation of polarization has gained widespread attention because it offers a promising route to new contactless memories and switches. However, the current research basically focuses on the photocontrol of data storage rather than data reading, which cannot realize the whole process of contactless write-read-erase data storage. Here, we present a pair of enantiomorphic diarylethene derivative ferroelectric crystals, showing a light-driven phase transition triggered by photoisomerization between the open and closed forms. Under the visible light, they exhibit a binary-domain state in the open form with white color and the band gap of 3.26 eV, while they show a single-domain state in the closed form with blue color and the band gap of 1.68 eV after UV irradiation of 254/365 nm. In addition to writing and erasing ferroelectric domains with light, we can also use light to read their color to determine the polarization state of domains. Moreover, diarylethene derivatives have better thermal stability, higher photoexcited conversion efficiency, and larger changes of the absorption wavelength between two isomers than those in salicylideneaniline derivatives. This work not only discovers the first diarylethene-based ferroelectric crystals but also successfully realizes completely contactless manipulation of write-read-erase data storage in the organic ferroelectric semiconductors.

Domain memory effect in the organic ferroics

Shape memory alloys have been used extensively in actuators, couplings, medical guide wires, and smart devices, because of their unique shape memory effect and superelasticity triggered by the reversible martensitic phase transformations. For ferroic materials, however, almost no memory effects have been found for their ferroic domains after reversible phase transformations. Here, we present a pair of single-component organic enantiomorphic ferroelectric/ferroelastic crystals, (R)- and (S)-N-3,5-di-tert-butylsalicylidene-1-(1-naphthyl)ethylamine SA-NPh-(R) and SA-NPh-(S). It is notable that not only can their ferroic domain patterns disappear and reappear during reversible thermodynamic phase transformations, but they can also disappear and reappear during reversible light-driven phase transformations induced by enol-keto photoisomerization, both of which are from P1 to P21 polar space groups. Most importantly, the domain patterns are exactly the same in the initial and final states, demonstrating the existence of a memory effect for the ferroic domains in SA-NPh-(R) and SA-NPh-(S). As far as we are aware, the domain memory effect triggered by both thermodynamic and light-driven ferroelectric/ferroelastic phase transformations remains unexplored in ferroic materials. Thermal and optical control of domain memory effect would open up a fresh research field for smart ferroic materials.

Dielectric-Optical Switches: Photoluminescent, EPR, and Magnetic Studies on Organic-Inorganic Hybrid (azetidinium)2MnBr4

A new organic-inorganic hybrid, AZEMnBr, has been synthesized and characterized. The thermal differential scanning calorimetry, differential thermal analysis, and thermogravimetric analyses indicate one structural phase transition (PT) at 346 and 349 K, on cooling and heating, respectively. AZEMnBr crystallizes at 365 K in the orthorhombic, Pnma, structure, which transforms to monoclinic P2₁/n at 200 K. Due to the X-ray diffraction studies, the anionic MnBr₄^2- moiety is discrete. The azetidinium cations show dynamical disorder in the high-temperature phase. In the proposed structural PT, the mechanism is classified as an order-disorder type. The structural changes affect the dielectric response. In this paper, the multiple switches between low- and high- dielectric states are presented. In addition, it was also observed that the crystal possesses a mutation of fluorescent properties between phase ON and OFF in the PT's point vicinity. We also demonstrate that EPR spectroscopy effectively detects PTs in structurally diverse Mn(II) complexes. AZEMnBr compounds show DC magnetic data consistent with the S = 5/2 spin system with small zero-field splitting, which was confirmed by EPR measurements and slow magnetic relaxation under the moderate DC magnetic field typical for a single-ion magnet behavior. Given the above, this organic-inorganic hybrid can be considered a rare example of multifunctional materials that exhibit dielectric, optical, and magnetic activity.

Two quasi-spherical molecules [1,4-diazabicyclo(3.2.2)nonane]X (X = ClO4, ReO4) exhibit switchable phase transition, dielectric and second-harmonic-generation properties

Two quasi-spherical molecules [3.2.2-Hdabc]X (1,4-diazabicyclo[3.2.2]nonane = 3.2.2-dabcn, X = ClO4, ReO4) with a high phase transition temperature exhibited switchable phase transition as well as dielectric and SHG properties.

High temperature molecular-based phase transition compounds with tunable and switchable dielectric properties

Molecular-based dielectric switching compounds [ClEt-Dabco][ReO4]2 and [BrEt-Dabco][ReO4]2 with high-temperature phase transition.

Competing hydrogen-bonding interactions in a high-Tc organic molecular-ionic crystal with evident nonlinear optical response

An organic molecular-ionic crystal of (TPPO–H)₂SO₄ exhibits moderate NLO response which is twice that of KDP and competing hydrogen-bonding interactions triggered high-T_c phase transition.

One-dimensional DABCO hydrogen-bonding chain in a hexagonal channel of magnetic [Ni(dmit)2]

Crystals of (HDABCO+)9(DABCO)[Ni(dmit)2]9·6CH3CN were shown to have a space group of R3[combining macron], a hexapetal flower-like channel of [Ni(dmit)2] anions, and a one-dimensional hydrogen bonding chain composed of protonated DABCO and CH3CN molecules. The crystals display antiferromagnetic and ferromagnetic interactions within and between hexamers, respectively, whereas the flexible DABCO-CH3CN array shows dielectric relaxation.

Interplay between spin crossover and proton migration along short strong hydrogen bonds

The iron(ii) salt [Fe(bpp)2](isonicNO)2·HisonicNO·5H2O (1) (bpp = 2,6-bis(pyrazol-3-yl)pyridine; isonicNO = isonicotinate N-oxide anion) undergoes a partial spin crossover (SCO) with symmetry breaking at T 1 = 167 K to a mixed-spin phase (50% high-spin (HS), 50% low-spin (LS)) that is metastable below T 2 = 116 K. Annealing the compound at lower temperatures results in a 100% LS phase that differs from the initial HS phase in the formation of a hydrogen bond (HB) between two water molecules (O4W and O5W) of crystallisation. Neutron crystallography experiments have also evidenced a proton displacement inside a short strong hydrogen bond (SSHB) between two isonicNO anions. Both phenomena can also be detected in the mixed-spin phase. 1 undergoes a light-induced excited-state spin trapping (LIESST) of the 100% HS phase, with breaking of the O4W⋯O5W HB and the onset of proton static disorder in the SSHB, indicating the presence of a light-induced activation energy barrier for proton motion. This excited state shows a stepped relaxation at T 1(LIESST) = 68 K and T 2(LIESST) = 76 K. Photocrystallography measurements after the first relaxation step reveal a single Fe site with an intermediate geometry, resulting from the random distribution of the HS and LS sites throughout the lattice.

Hybrid Organic-Inorganic Antiperovskites

Substitution of A-site and/or X-site ions of ABX₃ -type perovskites with organic groups can give rise to hybrid perovskites, many of which display intriguing properties beyond their parent compounds. However, this method cannot be extended effectively to hybrid antiperovskites. Now, the design of hybrid antiperovskites under the guidance of the concept of Goldschmidt's tolerance factor is presented. Spherical anions were chosen for the A and B sites and spherical organic cations for the X site, and seven hybrid antiperovskites were obtained, including (F₃ (H₂ O)_x )(AlF₆ )(H₂ dabco)₃ , ((Co(CN)₆ )(H₂ O)₅ )(MF₆ )(H₂ dabco)₃ (M=Al³⁺ , Cr³⁺ , or In³⁺ ), (Co(CN)₆ )(MF₆ )(H₂ pip)₃ (M=Al³⁺ or Cr³⁺ ), and (SbI₆ )(AlF₆ )(H₂ dabco)₃ . These new structures reveal that all ions at A, B, and X sites of inorganic antiperovskites can be replaced by molecular ions to form hybrid antiperovskites. This work will lead to the synthesis of a large family of hybrid antiperovskites.

Antiferroelectric Phase Transition in a Proton-Transfer Salt of Squaric Acid and 2,3-Dimethylpyrazine

A proton-transfer reaction between squaric acid (H₂sq) and 2,3-dimethylpyrazine (2,3-Me₂pyz) results in crystallization of a new organic antiferroelectric (AFE), (2,3-Me₂pyzH⁺)(Hsq^-)·H₂O (1), which possesses a layered structure. The structure of each layer can be described as partitioned into strips lined with methyl groups of the Me₂pyzH⁺ cations and strips featuring extensive hydrogen bonding between the Hsq^- anions and water molecules. Variable-temperature dielectric measurements and crystal structures determined through a combination of single-crystal X-ray and neutron diffraction reveal an AFE ordering at 104 K. The phase transition is driven by ordering of protons within the hydrogen-bonded strips. Considering the extent of proton transfer, the paraelectric (PE) state can be formulated as (2,3-Me₂pyzH⁺)₂(Hsq₂^3-)(H₅O₂⁺), whereas the AFE phase can be described as (2,3-Me₂pyzH⁺)(Hsq^-)(H₂O). The structural transition caused by the localization of protons results in the change in color from yellow in the PE state to colorless in the AFE state. The occurrence and mechanism of the AFE phase transition have been also confirmed by heat capacity measurements and variable-temperature infrared and Raman spectroscopy. This work demonstrates a potentially promising approach to the design of new electrically ordered materials by engineering molecule-based crystal structures in which hydrogen-bonding interactions are intentionally partitioned into quasi-one-dimensional regions.

Toward the Targeted Design of Molecular Ferroelectrics: Modifying Molecular Symmetries and Homochirality

Although the first ferroelectric discovered in 1920 is Rochelle salt, a typical molecular ferroelectric, the front-runners that have been extensively studied and widely used in diverse applications, such as memory elements, capacitors, sensors, and actuators, are inorganic ferroelectrics with excellent electrical, mechanical, and optical properties. With the increased concerns about the environment, energy, and cost, molecular ferroelectrics are becoming promising supplements for inorganic ferroelectrics. The unique advantages of high structural tunability and homochirality, which are unavailable in their inorganic counterparts, make molecular systems a good platform for manipulating ferroelectricity. Remarkably, based on the Neumann's principle and the Curie symmetry principle defining the group-to-subgroup relationship, we have found some outstanding high-temperature molecular ferroelectrics, like diisopropylammonium bromide (DIPAB) with a large spontaneous polarization up to 23 μC/cm² ( Fu, D. W.; et al. Science 2013 , 339 , 425 ). However, their application potential is severely limited by the uniaxial nature, leading to major issues in finding proper substrates for thin-film growth and achieving high thin-film performance. Inspired by the commercialized inorganic ferroelectrics like Pb(Zr, Ti)O₃ (PZT), where the multiaxial nature contributes greatly to the optimized ferroelectric and piezoelectric performance, developing high-temperature multiaxial molecular ferroelectrics is an imminent task. In this Account, we review our recent research progress on the targeted design of multiaxial molecular ferroelectrics. We first propose the "quasi-spherical theory", a phenomenological theory based on the Curie symmetry principle, to modify the spherical cations to a low-symmetric quasi-spherical geometry for acquiring the highly symmetric paraelectric phase and the polar ferroelectric phase of multiaxial ferroelectrics simultaneously. Besides the sizes and weights of the cation and anion, the intermolecular interactions are particularly crucial for decelerating the molecular rotation at low temperature to reasonably induce ferroelectricity. It means that the momentums of the cation and anion should be matched, so we describe the "momentum matching theory". In particular, introducing homochirality, a superiority of molecular materials over the inorganic ones, was demonstrated as an effective approach to increase the incidence of ferroelectric crystal structures. Thanks to the striking chemical variability and structure-property flexibility of molecular materials, our research efforts outlined in this Account have led to and will further motivate the richness and the application exploration of high-temperature, high-performance multiaxial molecular ferroelectrics, along with the implementation and perfection of the targeted design strategies.

A paraelectric-ferroelectric phase transition of an organically templated zinc oxalate coordination polymer

Water-presence dependent switchable ferroelectricity was discovered in the hybrid organic-inorganic zinc oxalate 1D coordination polymer (DABCOH2)[Zn(C2O4)2]·3H2O (DZnOH, where DABCOH2: diprotonated 1.4-diazoniabicyclo[2.2.2]octane). The compound undergoes a reversible para-ferroelectric phase transition at 207 K from room temperature centrosymmetric phase I (space group P21/n) to low-temperature non-centrosymmetric phase II (space group P21). The microscopic mechanism of the phase transition is directly associated with the reconstruction of the hydrogen-bond network. On heating, the crystals exhibit a reversible single-crystal to single-crystal transformation concerned with the removal of all water molecules giving anhydrous DABCO zinc oxalate (DABCOH2)[Zn(C2O4)2] (DZnO). The dehydrated compound does not show ferroelectric properties.

Dynamic molecular crystals with switchable physical properties

The development of molecular materials whose physical properties can be controlled by external stimuli - such as light, electric field, temperature, and pressure - has recently attracted much attention owing to their potential applications in molecular devices. There are a number of ways to alter the physical properties of crystalline materials. These include the modulation of the spin and redox states of the crystal's components, or the incorporation within the crystalline lattice of tunable molecules that exhibit stimuli-induced changes in their molecular structure. A switching behaviour can also be induced by changing the molecular orientation of the crystal's components, even in cases where the overall molecular structure is not affected. Controlling intermolecular interactions within a molecular material is also an effective tool to modulate its physical properties. This Review discusses recent advances in the development of such stimuli-responsive, switchable crystalline compounds - referred to here as dynamic molecular crystals - and suggests how different approaches can serve to prepare functional materials.

Multiaxial Molecular Ferroelectric Thin Films Bring Light to Practical Applications

Though dominating most of the practical applications, inorganic ferroelectric thin films usually suffer from the high processing temperatures, the substrate limitation, and the complicated fabrication techniques that are high-cost, energy-intensive, and time-consuming. By contrast, molecular ferroelectrics offer more opportunities for the next-generation flexible and wearable devices due to their inherent flexibility, tunability, environmental-friendliness, and easy processability. However, most of the discovered molecular ferroelectrics are uniaxial, one major obstacle for improving the thin-film performance and expanding the application potential. In this Perspective, we overview the recent advances on multiaxial molecular ferroelectric thin films, which is a solution to this issue. We describe the strategies for screening multiaxial molecular ferroelectrics and characterizations of the thin films, and highlight their advantages and future applications. Upon rational and precise design as well as optimizing ferroelectric performance, the family of multiaxial molecular ferroelectric thin films surely will get booming in the near future and inject vigor into the century-old ferroelectric field.

Unmasking the Mechanism of Structural Para- to Ferroelectric Phase Transition in (NH4)2SO4

New nontoxic and biocompatible ferroelectric materials are a subject undergoing intense study. One of the most promising research branches is focused on H-bonded organic or hybrid ferroelectrics. The engineering of these materials is based on mimicking the phase transition mechanisms of the well-known inorganic ferroelectrics. In our study, a coupled experimental and theoretical methodology was used for a precise investigation of the ferroelectric phase transition mechanism in ammonium sulfate (AS). A series of single-crystal X-ray diffraction measurements were performed in the temperature range between 273 and 163 K. The detailed inspection of the obtained static structural data, in the above-mentioned temperature range, allowed us to reveal dynamical effects at the ferroelectric phase transition. Accurate analysis of all geometrical features within the obtained crystal structures was carried out. The results were discussed in the view of previously discovered physical properties. X-ray studies were complemented by the use of quantum theory of atoms in molecules calculations and Hirshfeld surface analysis. Valence shell charge concentration analysis allowed us to find the subtle changes between charge density distribution within SO₄^2- in para- and ferroelectric phases. H-bond interactions, geometrically classified in both AS phases, were all confirmed by the appropriate critical points. The interaction energies were estimated for the structures at 273, 233, 213, 183, and 163 K. Correlation between the geometrical approach and the results of theoretical calculations enabled us to discover the differences in interaction equilibrium between the AS phases. The mechanism of the phase transition originates from the disruption of the vibrational lattice mode between sulfate anions. Our studies resolved the problem, which was under discussion for more than 60 years.

[C7H14NO][ClO4]: order–disorder structural change induced sudden switchable dielectric behaviour at room temperature

Static-to-dynamic transition in organic–inorganic hybrid [C₇H₁₄NO][ClO₄] exhibits switch-type characteristics during the dielectric transitions between high- and low-dielectric states.

A Multiaxial Molecular Ferroelectric with Highest Curie Temperature and Fastest Polarization Switching

The classical organic ferroelectric, poly(vinylidene fluoride) (PVDF), has attracted much attention as a promising candidate for data storage applications compatible with all-organic electronics. However, it is the low crystallinity, the large coercive field, and the limited thermal stability of remanent polarization that severely hinder large-scale integration. In light of that, we show a molecular ferroelectric thin film of [Hdabco][ReO₄] (dabco = 1,4-diazabicyclo[2.2.2]octane) (1), belonging to another class of typical organic ferroelectrics. Remarkably, it displays not only the highest Curie temperature of 499.6 K but also the fastest polarization switching of 100k Hz among all reported molecular ferroelectrics. Combined with the large remanent polarization values (∼9 μC/cm²), the low coercive voltages (∼10 V), and the unique multiaxial ferroelectric nature, 1 becomes a promising and viable alternative to PVDF for data storage applications in next-generation flexible devices, wearable devices, and bionics.

Quinuclidinium salt ferroelectric thin-film with duodecuple-rotational polarization-directions

Ferroelectric thin-films are highly desirable for their applications on energy conversion, data storage and so on. Molecular ferroelectrics had been expected to be a better candidate compared to conventional ferroelectric ceramics, due to its simple and low-cost film-processability. However, most molecular ferroelectrics are mono-polar-axial, and the polar axes of the entire thin-film must be well oriented to a specific direction to realize the macroscopic ferroelectricity. To align the polar axes, an orientation-controlled single-crystalline thin-film growth method must be employed, which is complicated, high-cost and is extremely substrate-dependent. In this work, we discover a new molecular ferroelectric of quinuclidinium periodate, which possesses six-fold rotational polar axes. The multi-axes nature allows the thin-film of quinuclidinium periodate to be simply prepared on various substrates including flexible polymer, transparent glasses and amorphous metal plates, without considering the crystallinity and crystal orientation. With those benefits and excellent ferroelectric properties, quinuclidinium periodate shows great potential in applications like wearable devices, flexible materials, bio-machines and so on.

Molecular ferroelectric crystals hold promise in data storage applications, yet their preparations by maximizing molecular polarization are challenging. Here, You et al. report quinuclidinium periodate with six rotation axes and grow them in macroscopic ferroelectric thin films via a solution process.

Switchable dielectric phase transition originating from disorder–order transformation and distortion in {[(C4H4N2)Co(H2O)4]SO4·2H2O}n

Disorder–order transition of the SO₄²⁻ and distortion of the [(C₄H₄N₂)Co(H₂O)₄]²⁺ chain induce the phase transition of {[(C₄H₄N₂)Co(H₂O)₄]SO₄·2H₂O}_n.

Anomalously rotary polarization discovered in homochiral organic ferroelectrics

Molecular ferroelectrics are currently an active research topic in the field of ferroelectric materials. As complements or alternatives of conventional inorganic ferroelectrics, they have been designed to realize various novel properties, ranging from multiferroicity and semiconductive ferroelectricity to ferroelectric photovoltaics and ferroelectric luminescence. The stabilizing of ferroelectricity in various systems is owing to the flexible tailorability of the organic components. Here we describe the construction of optically active molecular ferroelectrics by introducing homochiral molecules as polar groups. We find that the ferroelectricity in (R)-(-)-3-hydroxlyquinuclidinium halides is due to the alignment of the homochiral molecules. We observe that both the specific optical rotation and rotatory direction change upon paraelectric-ferroelectric phase transitions, due to the existence of two origins from the molecular chirality and spatial arrangement, whose contributions vary upon the transitions. The optical rotation switching effect may find applications in electro-optical elements.

Symmetry breaking in molecular ferroelectrics

Symmetry breaking occurs between the high-temperature, high-symmetry paraelectric phase and the low-temperature, low-symmetry ferroelectric phase along with a reduction in the number of symmetry elements, obeying the Curie symmetry principle and relating to the ferroelectricity.