A new multipurpose diffractometer PILATUS@SNBL

Interaction of Arginine-Rich Surfactant-like Peptide Nanotubes with Liposomes

The interaction of the surfactant-like peptide (SLP) R3L12 bearing three cationic arginine residues with model liposomes is investigated in aqueous solution at various pH values, under conditions for which the SLP self-assembles into nanotubes. The structure of liposomes of model anionic lipid DPPG [1,2-dipalmitoyl-sn-glycero-3-phospho-rac-(1-glycerol)], or zwitterionic lipid DPPE [1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine] is probed using small-angle X-ray scattering and cryogenic-transmission electron microscopy. The unilamellar vesicles of DPPG are significantly restructured in the presence of R3L12, especially at low pH, and multilamellar vesicles of DPPE are also restructured under these conditions. The SLP promotes the release of cargo encapsulated in the vesicles as probed by calcein fluorescence, with notably higher release for anionic DPPG vesicles. Laurdan fluorescence experiments to probe membrane fluidity (lipid chain ordering) show that R3L12 destabilizes the lipid gel phase, especially for anionic DPPG. This model nanotube-forming SLP has promise as a pH-sensitive release system for vesicle-encapsulated cargo.

Toughening Immiscible Polymer Blends: The Role of Interface-Crystallization-Induced Compatibilization Explored Through Nanoscale Visualization

This study explores the novel approach of interface-crystallization-induced compatibilization (ICIC) via stereocomplexation as a promising method to improve the interfacial strength in thermodynamically immiscible polymers. Herein, two distinct reactive interfacial compatibilizers, poly(styrene-co-glycidyl methacrylate)-graft-poly(l-lactic acid) (SAL) and poly(styrene-co-glycidyl methacrylate)-graft-poly(d-lactic acid) (SAD) are synthesized via reactive melt blending in an integrated grafting and blending process. This approach is demonstrated to enhance the interfacial strength of immiscible polyvinylidene fluoride/poly l-lactic acid (PVDF/PLLA) 50/50 blends via ICIC. IR nanoimaging indicates a cocontinuous morphology in the blends. The blend compatibilized with SAD exhibits a higher storage modulus, as unveiled by small amplitude oscillatory shear (SAOS) in the melt state at a temperature below the melting temperature of the stereocomplex (SC) crystals and by DMTA measurements in the solid state. This increase is attributed to the formation of a 200-300 nm thick rigid interfacial SC crystalline layer that is directly visible using AFM imaging and chemically characterized via IR nanospectroscopy. This ICIC also results in a significant toughening of the blend, with the elongation at break increasing more than 20-fold. Moreover, the fracture toughness factor obtained from single edge-notch bending (SENB) tests is doubled with ICIC as compared to the uncompatibilized blend, indicating the strong crack-resistance capability as a result of ICIC. This improvement is also evident in SEM images, where thinner and longer fibrillation is observed on the fractured surface in the presence of ICIC.

Deciphering the Impact of Current, Composition, and Potential on the Lithiation Behavior of Si-Rich Silicon-Graphite Anodes

Adding silicon (Si) to graphite (Gr) anodes is an effective approach for boosting the energy density of lithium-ion batteries, but it also triggers mechanical instability due to Si volume changes upon (de)lithiation reactions. In this work, component-specific (de)lithiation dynamics on Si-rich (30 and 70 wt.% Si) SiGr anodes at various charge/discharge C-rates are unveiled and compared to a graphite-only electrode (100Gr) via operando synchrotron X-ray diffraction coupled with differential capacity plots analysis. Results show preferential lithiation of amorphous Si above ≈200 mV and competing lithiation of Gr, amorphous Si, and crystalline Si below ≈200 mV. Discharge proceeds via sequential delithiation of Gr and amorphous lithium silicide. Si shifts the interconversion potentials of graphite intercalation compounds, lowering the Gr state of charge compared to 100Gr. In the 30% Si electrode, crystalline Si amorphization at potentials <110 mV is found to be kinetically hindered at C-rates higher than C/5, which can be key for enhancing the cycling stability of SiGr anodes. The 70% Si electrode exhibits restricted lithium diffusion in Gr, full Si amorphization, and Li15Si4 formation. These findings related to the potential- and current-dependent dynamic changes on SiGr blends are crucial for designing stable high energy density SiGr anodes.

Cyclodextrin-Induced Suppression of PEG Crystallization from the Melt in a PEG-Peptide Conjugate

The influence of alpha-cyclodextrin (αCD) on PEG crystallization is examined for a peptide-PEG conjugate, YYKLVFF-PEG3k comprising an amyloid peptide YYKLVFF linked to PEG with molar mass 3 kg mol-1. Remarkably, differential scanning calorimetry (DSC) and simultaneous synchrotron small-angle/wide-angle X-ray scattering (SAXS/WAXS) show that crystallization of PEG is suppressed by αCD, provided that the cyclodextrin content is sufficient. A hexagonal mesophase is formed instead. The αCD threading reduces the conformational flexibility of PEG, and hence suppresses crystallization. These results show that addition of cyclodextrins can be used to tune the crystallization of peptide-polymer conjugates and potentially other polymer/biomolecular hybrids.

Metastable CoCu2O3 Nanocrystals from Combustion-Aerosols for Molecular Sensing and Catalysis

Metastable nanostructures are kinetically trapped in local energy minima featuring intriguing surface and material properties. To unleash their potential, there is a need for non-equilibrium processes capable of stabilizing a large range of crystal phases outside thermodynamic equilibrium conditions by closely and flexibly controlling atomic reactant composition, spatial temperature distribution and residence time. Here, the capture of metastable pseudo-binary metal oxides at room temperature is demonstrated with scalable combustion-aerosol processes. By a combination of X-ray diffraction, electron microscopy and on-line flame characterization, the occurrence of metastable CoCu2O3 is investigated with controlled crystal size (4-16 nm) over thermodynamically stable CuO and Co3O4. Immediate practical impact is demonstrated by exceptional sensing and stable catalytic performance for air pollutant detection (e.g., 15 parts-per-billion benzene) shown for, at least, 21 days. This approach can be extended to various binary, ternary and high entropy oxides with even more components. Also, secondary phases can be loaded on such metastable nanocrystals to access novel materials promising for actuators, energy storage or solar cells.

Local Symmetry Deviation from the Average Structure of MnAs Revealed by Pair Distribution Function

MnAs is an interesting material due to its magnetocaloric properties, which can be utilized in magnetic refrigeration. However, despite major efforts, its magnetic refrigeration performances in the substituted forms could not be improved compared to the parent MnAs phase. Both small and big box modeling of the pair distribution function of MnAs for the local structure description and powder X-ray diffraction for the average structure reveal an inherent local orthorhombic distortion in the hexagonal structure of MnAs. As a result of this distortion, any modification to the hexagonal structure results in an orthorhombic structure and a weaker magnetocaloric performance. This study highlights the importance of studying local distortion in magnetic materials. This is achieved by combining X-ray absorption spectroscopy with total scattering X-ray diffraction.

Cyclodextrin-Induced Suppression of the Crystallization of Low-Molar-Mass Poly(ethylene glycol)

We examine the effect of alpha-cyclodextrin (αCD) on the crystallization of poly(ethylene glycol) (PEG) [poly(ethylene oxide), PEO] in low-molar-mass polymers, with M w = 1000, 3000, or 6000 g mol-1. Differential scanning calorimetry (DSC) and simultaneous synchrotron small-/wide-angle X-ray scattering (SAXS/WAXS) show that crystallization of PEG is suppressed by αCD, provided that the cyclodextrin content is sufficient. The PEG crystal structure is replaced by a hexagonal mesophase of αCD-threaded polymer chains. The αCD threading reduces the conformational flexibility of PEG and, hence, suppresses crystallization. These findings point to the use of cyclodextrin additives as a powerful means to tune the crystallization of PEG (PEO), which, in turn, will impact bulk properties including biodegradability.

Elucidating the Impact of Li3InCl6-Coated LiNi0.8Co0.15Al0.05O2 on the Electro-Chemo-Mechanics of Li6PS5Cl-Based Solid-State Batteries

Li6PS5Cl has attracted significant attention due to its high Li-ion conductivity and processability, facilitating large-scale solid-state battery applications. However, when paired with high-voltage cathodes, it experiences adverse side reactions. Li3InCl6 (LIC), known for its higher stability at high voltages and moderate Li-ion conductivity, is considered a catholyte to address the limitations of Li6PS5Cl. To extend the stability of Li6PS5Cl toward LiNi0.8Co0.15Al0.05O2 (NCA), we applied nanocrystalline LIC as a 180 nm-thick protective coating in a core-shell-like fashion (LIC@NCA) via mechanofusion. Solid-state batteries with LIC@NCA allow an initial discharge specific capacity of 148 mA h/g at 0.1C and 80% capacity retention for 200 cycles at 0.2C with a cutoff voltage of 4.2 V (vs Li/Li+), while cells without LIC coating suffers from low initial discharge capacity and poor retention. Using a wide spectrum of advanced characterization techniques, such as operando XRD, XPS, FIB-SEM, and TOF-SIMS, we reveal that the superior performance of solid-state batteries employing LIC@NCA is related to the suppression of detrimental interfacial reactions of NCA with Li6PS5Cl, delamination, and particle cracking compared to uncoated NCA.

Order-to-Disorder Transition and Hydrogen Bonding in the Jahn-Teller Active NH4CrF3 Fluoroperovskite

Large quantities of high-purity NH4CrF3 have been synthesized using a wet-chemical method, and its structural chemistry and magnetic properties are investigated in detail for the first time. NH4CrF3 is a tetragonal fluoroperovskite that displays an ordering of the ammonium (NH4+) groups at room temperature and C-type orbital ordering. The ammonium groups order and display distinct signs of hydrogen bonds to nearby fluoride anions by buckling the Cr-F-Cr angle away from 180°. The ammonium ordering remains up to 405 K, much higher than in other ammonium fluoroperovskites, indicating a correlation between the flexibility of the Jahn-Teller ion, the hydrogen bond formation, and the ammonium ordering. At 405 K, an order-to-disorder transition occurs, where the ammonium groups disorder, corresponding to a transition to higher symmetry. This is accompanied by a contraction of the unit cell from breaking hydrogen bonds, similar to the phenomenon observed in water ice melting. The compound orders antiferromagnetically with a Neél temperature of 60 K, an effective paramagnetic moment of 4.3 μB, and a Weiss temperature of -33 K. An A-type antiferromagnetic structure is identified by neutron diffraction, with an ordered moment of 3.72(2) μB.

Alleviating nanostructural phase impurities enhances the optoelectronic properties, device performance and stability of cesium-formamidinium metal-halide perovskites

The technique of alloying FA+ with Cs+ is often used to promote structural stabilization of the desirable α-FAPbI3 phase in halide perovskite devices. However, the precise mechanisms by which these alloying approaches improve the optoelectronic quality and enhance the stability have remained elusive. In this study, we advance that understanding by investigating the effect of cationic alloying in CsxFA1-xPbI3 perovskite thin-films and solar-cell devices. Selected-area electron diffraction patterns combined with microwave conductivity measurements reveal that fine Cs+ tuning (Cs0.15FA0.85PbI3) leads to a minimization of stacking faults and an increase in the photoconductivity of the perovskite films. Ultra-sensitive external quantum efficiency, kelvin-probe force microscopy and photoluminescence quantum yield measurements demonstrate similar Urbach energy values, comparable surface potential fluctuations and marginal impact on radiative emission yields, respectively, irrespective of Cs content. Despite this, these nanoscopic defects appear to have a detrimental impact on inter-grains'/domains' carrier transport, as evidenced by conductive-atomic force microscopy and corroborated by drastically reduced solar cell performance. Importantly, encapsulated Cs0.15FA0.85PbI3 devices show robust operational stability retaining 85% of the initial steady-state power conversion efficiency for 1400 hours under continuous 1 sun illumination at 35 °C, in open-circuit conditions. Our findings provide nuance to the famous defect tolerance of halide perovskites while providing solid evidence about the detrimental impact of these subtle structural imperfections on the long-term operational stability.

Empowering CO2 Eco-Refrigeration With Colossal Breathing-Caloric-Like Effects in MOF-508b

Today, ≈20% of the electric consumption is devoted to refrigeration; while, ≈50% of the final energy is dedicated to heating applications. In this scenario, many cooling devices and heat-pumps are transitioning toward the use of CO2 as an eco-friendly refrigerant, favoring carbon circular economy. Nevertheless, CO2 still has some limitations, such as large operating pressures (70-150 bar) and a critical point at 31 °C, which compromises efficiency and increases technological complexity. Very recently, an innovative breathing-caloric mechanism in the MIL-53(Al) compound is reported, which implies gas adsorption under CO2 pressurization boosted by structural transitions and which overcomes the limitations of stand-alone CO2. Here, the breathing-caloric-like effects of MOF-508b are reported, surpassing by 40% those of MIL-53(Al). Moreover, the first thermometry device operating at room temperature and under the application of only 26 bar of CO2 is presented. Under those conditions, this material presents values of ΔT ≈ 30 K, reaching heating temperatures of 56 °C and cooling temperatures of -10 °C, which are already useful for space heating, air-conditioning, food refrigeration, and freezing applications.

Operando UV-vis spectroscopy for real-time monitoring of nanoparticle size in reaction conditions: a case study on rWGS over Au nanoparticles

We propose the use of surface plasmon resonance (SPR) as a distinctive marker for real-time monitoring in reaction conditions of gold nanoparticles supported on α-Al2O3. The study leverages the SPR shape-and-size dependency to monitor metal nanoparticles in reaction conditions, evidencing an influence of both dimensions and agglomerations on the SPR peak position. Operando measurements, coupling UV-vis spectroscopy and catalytic testing, allows to follow the dynamics during nanoparticle formation (Au3+ to Au0 reduction) and during the reverse water gas shift reaction (CO2 + H2 → CO + H2O). The catalyst structure and stability in reaction conditions was further confirmed by operando X-ray spectroscopy and PXRD data. Overall, this approach enables the direct acquisition of information on the structure-activity relationship of metal-based supported catalysts under actual reaction conditions.

Grazing-incidence synchrotron radiation diffraction studies on irradiated Ce-doped and pristine Y-stabilized ZrO2 at the Rossendorf beamline

In this work, Ce-doped yttria-stabilized zirconia (YSZ) and pure YSZ phases were subjected to irradiation with 14 MeV Au ions. Irradiation studies were performed to simulate long-term structural and microstructural damage due to self-irradiation in YSZ phases hosting alpha-active radioactive species. It was found that both the Ce-doped YSZ and the YSZ phases had a reasonable tolerance to irradiation at high ion fluences and the bulk crystallinity was well preserved. Nevertheless, local microstrain increased in all compounds under study after irradiation, with the Ce-doped phases being less affected than pure YSZ. Doping with cerium ions increased the microstructural stability of YSZ phases through a possible reduction in the mobility of oxygen atoms, which limits the formation of structural defects. Doping of YSZ with tetravalent actinide elements is expected to have a similar effect. Thus, YSZ phases are promising for the safe long-term storage of radioactive elements. Using synchrotron radiation diffraction, measurements of the thin irradiated layers of the Ce-YSZ and YSZ samples were performed in grazing incidence (GI) mode. A corresponding module for measurements in GI mode was developed at the Rossendorf Beamline and relevant technical details for sample alignment and data collection are also presented.

Lattice response to the radiation damage of molecular crystals: radiation-induced versus thermal expansivity

The interaction of intense synchrotron radiation with molecular crystals frequently modifies the crystal structure by breaking bonds, producing fragments and, hence, inducing disorder. Here, a second-rank tensor of radiation-induced lattice strain is proposed to characterize the structural susceptibility to radiation. Quantitative estimates are derived using a linear response approximation from experimental data collected on three materials Hg(NO3)2(PPh3)2, Hg(CN)2(PPh3)2 and BiPh3 [PPh3 = triphenylphosphine, P(C6H5)3; Ph = phenyl, C6H5], and are compared with the corresponding thermal expansivities. The associated eigenvalues and eigenvectors show that the two tensors are not the same and therefore probe truly different structural responses. The tensor of radiative expansion serves as a measure of the susceptibility of crystal structures to radiation damage.

Unravelling the components of diffuse scattering using deep learning

Many technologically important material properties are underpinned by disorder and short-range structural correlations; therefore, elucidating structure-property relationships in functional materials requires understanding both the average and the local structures. The latter information is contained within diffuse scattering but is challenging to exploit, particularly in single-crystal systems. Separation of the diffuse scattering into its constituent components can greatly simplify analysis and allows for quantitative parameters describing the disorder to be extracted directly. Here, a deep-learning method, DSFU-Net, is presented based on the Pix2Pix generative adversarial network, which takes a plane of diffuse scattering as input and factorizes it into the contributions from the molecular form factor and the chemical short-range order. DSFU-Net was trained on 198 421 samples of simulated diffuse scattering data and performed extremely well on the unseen simulated validation dataset in this work. On a real experimental example, DSFU-Net successfully reproduced the two components with a quality sufficient to distinguish between similar structural models based on the form factor and to refine short-range-order parameters, achieving values comparable to other established methods. This new approach could streamline the analysis of diffuse scattering as it requires minimal prior knowledge of the system, allows access to both components in seconds and is able to compensate for small regions with missing data. DSFU-Net is freely available for use and represents a first step towards an automated workflow for the analysis of single-crystal diffuse scattering.

Never-Ending Story: New Cyclodextrin-Based Metal-Organic Framework Crystal Structures Obtained Using Different Crystallization Methods

Six novel cyclodextrin (CD)-based metal-organic frameworks (MOFs) were synthesized using distinct crystallization methodologies. A modified vapor diffusion method is introduced for the first time, termed fast crystallization, which enables the rapid solid-state formation of MOF compounds. This innovative method yielded four of the newly synthesized MOFs. The crystal structures of five obtained frameworks were structurally characterized through single-crystal X-ray diffraction, while one, compound 5 (γ-CD-K-5), was additionally characterized as a bulk powder. Structural analysis revealed that two of the newly obtained MOFs, namely, compound 2 (α-CD-K-2) and compound 3 (α-CD-Rb-3), exhibited isostructural characteristics, forming a three-dimensional (3D) framework. Compound 1 (α-CD-K-1) shared the same space group as EVEGET (α-CD-K) and displayed the same framework type. Furthermore, the crystal packing of compound 4 (β-CD-K-4) closely resembled that of compound 1 and EVEGET, with the only distinction lying in the type of CD employed. Notably, compound 6 (γ-CD-K-6) incorporated an iodine ion with an occupancy of 0.2. To discern the intermolecular interactions within the obtained MOFs, the Hirshfeld surface was calculated using Crystal Explorer software.

Which Ion Dominates the Temperature and Pressure Response of Halide Perovskites and Elpasolites?

Halide perovskites and elpasolites are key for optoelectronic applications due to their exceptional performance and adaptability. However, understanding their crucial elastic properties for synthesis and device operation remains limited. We performed temperature- and pressure-dependent synchrotron-based powder X-ray diffraction at low pressures (ambient to 0.06 GPa) to investigate their elastic properties in their ambient-pressure crystal structure. We found common trends in bulk modulus and thermal expansivity, with an increased halide ionic radius (Cl to Br to I) resulting in greater softness, higher compressibility, and thermal expansivity in both materials. The A cation has a minor effect, and mixed-halide compositions show intermediate properties. Notably, thermal phase transitions in MAPbI3 and CsPbCl3 induced lattice softening and negative expansivity for specific crystal axes, even at temperatures far from the transition point. These results emphasize the significance of considering temperature-dependent elastic properties, which can significantly impact device stability and performance during manufacturing or temperature sweeps.

Structural insight into the cooperativity of spin crossover compounds

Spin-crossover (SCO) compounds are promising materials for a wide variety of industrial applications. However, the fundamental understanding of their nature of transition and its effect on the physical properties are still being fervently explored; the microscopic knowledge of their transition is essential for tailoring their properties. Here an attempt is made to correlate the changes in macroscopic physical properties with microscopic structural changes in the orthorhombic and monoclinic polymorphs of the SCO compound Fe(PM-Bia)2(NCS)2 (PM = N-2'-pyridylmethylene and Bia = 4-aminobiphenyl) by employing single-crystal X-ray diffraction, magnetization and DSC measurements. The dependence of macroscopic properties on cooperativity, highlighting the role of hydrogen bonding, π-π and van der Waals interactions is discussed. Values of entropy, enthalpy and cooperativity are calculated numerically based on the Slichter-Drickamer model. The particle size dependence of the magnetic properties is probed along with the thermal exchange and the kinetic behavior of the two polymorphs based on the dependence of magnetization on temperature scan rate and a theoretical model is proposed for the calculation of the non-equilibrium spin-phase fraction. Also a scan-rate-dependent two-step behavior observed for the orthorhombic polymorph, which is absent for the monoclinic polymorph, is reported. Moreover, it is found that the radiation dose from synchrotron radiation affects the spin-crossover process and shifts the transition region to lower temperatures, implying that the spin crossover can be tuned with radiation damage.

X-ray and Neutron Diffraction Studies of SrTe2FeO6Cl, an Oxide Chloride with Rare Anion Ordering

The oxychloride SrTe2FeO6Cl is obtained by high-temperature solid-state synthesis under inert conditions in closed reaction vessels. The compound crystallizes in a novel monoclinic crystal structure that is described in the space group P121/n1 (No. 14). The unit cell parameters, a = 10.2604(1) Å, b = 5.34556(5) Å, c = 26.6851(3) Å, and β = 93.6853(4)°, and atomic parameters were determined from synchrotron diffraction data, starting from a model that was obtained from single-crystal X-ray diffraction data. The anion lattice exhibits a rare ordering of oxide and chloride ions: one-dimensional zig-zag ladders of chlorine (squarelike motif) are surrounded by an oxygen matrix. Two different iron sites coordinated solely to oxygen are present in the structure, one octahedral and one square pyramidal, both distorted. Similarly, two different strontium coordinations are present; the first homoleptic coordinated to eight oxygen atoms and the second heteroleptic coordinated to four oxygen and four chlorine atoms in a fac-like manner. The lone pair of Te(IV) is directed toward the larger chlorine atoms. Magnetic susceptibility measurements confirm that Fe is +3 (d5) in the high-spin electronic configuration, exhibiting an almost ideal spin-only moment, μeff = 5.65 μB Fe-1. The slightly negative Weiss constant (θCW = -39 K) suggests dominating antiparallel spin-to-spin coupling in the paramagnetic temperature range, agreeing with an observed long-range antiferromagnetic spin ordering below Néel temperature, TN ∼ 13 K, and a broad second order-like anomaly in the specific heat measurement data. Low-temperature neutron diffraction data reveal that the antiferromagnetic ordered phase is C-type, with a k-vector (1/2, 1/2, 0) and ordered moment of 4.14(7) μB. The spin structure can be described as antiferromagnetic ordered layers stacked along the a-axis, forming layers of squares that alternate along the c-axis.

A Direct Real-Time Observation of Anion Intercalation in Graphite Process and Its Fully Reversibility by SAXS/WAXS Techniques

The process of anion intercalation in graphite and its reversibility plays a crucial role in the next generation energy-storage devices. Herein the reaction mechanism of the aluminum graphite dual ion cell by operando X-ray scattering from small angles to wide angles is investigated. The staging behavior of the graphite intercalation compound (GIC) formation, its phase transitions, and its reversible process are observed for the first time by directly measuring the repeated intercalation distance, along with the microporosity of the cathode graphite. The investigation demonstrates complete reversibility of the electrochemical intercalation process, alongside nano- and micro-structural reorganization of natural graphite induced by intercalation. This work represents a new insight into thermodynamic aspects taking place during intermediate phase transitions in the GIC formation.

Synthesis and Structure of the Double-Layered Sillén-Aurivillius Perovskite Oxychloride La2.1Bi2.9Ti2O11Cl as a Potential Photocatalyst for Stable Visible Light Solar Water Splitting

Exploring photocatalysts for solar water splitting is a relevant step toward sustainable hydrogen production. Sillén-Aurivillius-type compounds have proven to be a promising material class for photocatalytic and photoelectrochemical water splitting with the advantage of visible light activity coupled to enhanced stability because of their unique electronic structure. Especially, double- and multilayered Sillén-Aurivillius compounds [An-1BnO3n+1][Bi2O2]2Xm, with A and B being cations and X a halogen anion, offer a great variety in material composition and properties. Yet, research in this field is limited to only a few compounds, all of them containing mainly Ta5+ or Nb5+ as cations. This work takes advantage of the outstanding properties of Ti4+ demonstrated in the context of photocatalytic water splitting. A fully titanium-based oxychloride, La2.1Bi2.9Ti2O11Cl, with a double-layered Sillén-Aurivillius intergrowth structure is fabricated via a facile one-step solid-state synthesis. A detailed crystal structure analysis is performed via powder X-ray diffraction and correlated to density functional theory calculations, providing a detailed understanding of the site occupancies in the unit cell. The chemical composition and the morphology are studied using scanning and transmission electron microscopy together with energy-dispersive X-ray analysis. The capability of the compound to absorb visible light is demonstrated by UV-vis spectroscopy and analyzed by electronic structure calculations. The activity toward the hydrogen and the oxygen evolution reaction is evaluated by measuring anodic and cathodic photocurrent densities, oxygen evolution rates, and incident-current-to-photon efficiencies. Thanks to the incorporation of Ti4+, this Sillén-Aurivillius-type compound enables best-in-class photoelectrochemical water splitting performance at the oxygen evolution side under visible light irradiation. Thus, this work highlights the potential of Ti-containing Sillén-Aurivillius-type compounds as stable photocatalysts for visible light-driven solar water splitting.

The nature of π-hole interactions between iodide anions and quinoid rings in the crystalline state

The investigated co-crystal of 3-chloro-N-methylpyridinium iodide with tetrabromoquinone (3-Cl-N-MePy·I·Br4Q) reveals a π-hole interaction between an iodide anion and a quinoid ring involving an n → π* charge transfer. The quinoid ring has a partial negative charge (estimated to be in the range 0.08-0.11e) and a partial radical character, which is related to the black colour of the crystals (crystals of neutral tetrabromoquinone are yellow). A detailed X-ray charge density study revealed two symmetry-independent bond critical points between the iodide anions and carbon atoms of the ring. Their maximum electron density of 0.065 e Å-3 was reproduced by quantum chemical modelling. The energy of the interaction is estimated to be -11.16 kcal mol-1, which is comparable to the strength of moderate hydrogen bonding (about -10 kcal mol-1); it is dominantly electrostatic in nature, with a considerable dispersion component.

Tuning of Polar Domain Boundaries in Nonpolar Perovskite

Domain boundaries in ferroic materials are found to have various physical properties not observed in the surrounding domains. Such differences can be enhanced and bring promising functionalities when centrosymmetric nonpolar materials encounter polar domain boundaries. In this work, a tunable polar domain boundary is discovered in an antiferroelectric single crystal. Under a small stress or electric field, the density, volume, and polarity of the boundaries are successfully controlled.

Template-free synthesis of mesoporous and amorphous transition metal phosphate materials

We present how mesoporosity can be engineered in transition metal phosphate (TMPs) materials in a template-free manner. The method involves the transformation of a precursor metal phosphate phase, called M-struvite (NH₄MPO₄·6H₂O, M = Mg²⁺, Ni²⁺, Co²⁺, Ni_xCo_1-x²⁺). It relies on the thermal decomposition of crystalline M-struvite precursors to an amorphous and simultaneously mesoporous phase, which forms during degassing of NH₃ and H₂O. The temporal evolution of mesoporous frameworks and the response of the metal coordination environment were followed by in situ and ex situ scattering and diffraction, as well as X-ray spectroscopy. Despite sharing the same precursor struvite structure, different amorphous and mesoporous structures were obtained depending on the involved transition metal. We highlight the systematic differences in absolute surface area, pore shape, pore size, and phase transitions depending on the metal cation present in the analogous M-struvites. The amorphous structures of thermally decomposed Mg-, Ni- and Ni_xCo_1-x-struvites exhibit high surface areas and pore volumes (240 m² g^-1 and 0.32 cm^-3 g^-1 for Mg and 90 m² g^-1 and 0.13 cm^-3 g^-1 for Ni). We propose that the low-cost, environmentally friendly M-struvites could be obtained as recycling products from industrial and agricultural wastewaters. These waste products could be then upcycled into mesoporous TMPs through a simple thermal treatment for further application, for instance in (electro)catalysis.

Structural insight into the magnesium borohydride - ethylenediamine solid-state Mg-ion electrolyte system

A highly complex crystal structure of stoichiometric Mg₅(en)₆(BH₄)₁₀ was solved from single crystal synchrotron X-ray diffraction and confirmed by neutron powder diffraction (NPD) on isotopically substituted Mg(en)_1.2(¹¹BD₄)₂. We highlight the role of the amorphous Mg(BH₄)₂ in the reactivity of the Mg(BH₄)₂-en system and characterized a previously overlooked phase, Mg(en)₂(BH₄)₂.

Trimorphic TaCrP – A diffraction and 31P solid state NMR spectroscopic study

The metal-rich phosphide TaCrP forms from the elements by step-wise solid state reaction in an alumina crucible (maximum annealing temperature 1180 K). TaCrP is trimorphic. The structural data of the hexagonal ZrNiAl high-temperature phase (space group P 6 ‾ 2 m $P\overline{6}2m$ ) was deduced from a Rietveld refinement. At room temperature TaCrP crystallizes with the TiNiSi type (Pnma, a = 623.86(5), b = 349.12(3), c = 736.78(6) pm, wR = 0.0419, 401 F 2 values, 20 variables) and shows a Peierls type transition below ca. 280 K to the monoclinic low-temperature modification (P121/c1, a = 630.09(3), b = 740.3(4), c = 928.94(4) pm, β = 132.589(5)°, wR = 0.0580, 1378 F 2 values, 57 variables). The latter phase transition is driven by pairwise Cr–Cr bond formation out of an equidistant chain in o-TaCrP. The phase transition was monitored via different analytical tools: differential scanning calorimetry, powder synchrotron X-ray diffraction, magnetic susceptibility measurements and 31P solid state NMR spectroscopy.

Effect of Nanodiamond Sizes on the Efficiency of the Quasi-Specular Reflection of Cold Neutrons

Nanomaterials can intensively scatter and/or reflect radiation. Such processes and materials are of theoretical and practical interest. Here, we study the quasi-specular reflections (QSRs) of cold neutrons (CNs) and the reflections of very cold neutrons (VCNs) from nanodiamond (ND) powders. The fluorination of ND increased its efficiency by removing/replacing hydrogen, which is otherwise the dominant cause of neutron loss due to incoherent scattering. The probability of the diffuse reflection of VCNs increased for certain neutron wavelengths by using appropriate ND sizes. Based on model concepts of the interaction of CNs with ND, and in reference to our previous work, we assume that the angular distribution of quasi-specularly reflected CNs is narrower, and that the probability of QSRs of longer wavelength neutrons increases if we increase the characteristic sizes of NDs compared to standard detonation nanodiamonds (DNDs). However, the probability of QSRs of CNs with wavelengths below the cutoff of ~4.12 Å decreases due to diffraction scattering on the ND crystal lattice. We experimentally compared the QSRs of CNs from ~4.3 nm and ~15.0 nm ND. Our qualitative conclusions and numerical estimates can help optimize the parameters of ND for specific practical applications based on the QSRs of CNs.

Unexpected luminescence of non-conjugated biomass-based polymers: new approach in photothermal imaging

Population growth, depletion of world resources and persistent toxic chemical production underline the need to seek new smart materials from inexpensive, biodegradable, and renewable feedstocks. Hence, "metal-free" ring-opening copolymerization to convert biomass carvone-based monomers into non-conventional luminescent biopolymers is considered a sustainable approach to achieve these goals. The non-conventional emission was studied in terms of steady-state and time-resolved spectroscopy in order to unravel the structure-properties for different carvone-based copolymers. The results highlighted the importance of the final copolymer folding structure as well as its environment in luminescent behavior (cluster-triggered emission). In all cases, their luminescent behavior is sensitive to small temperature fluctuations (where the minimum detected temperature is T_m ∼ 2 °C and relative sensitivity is S_r ∼ 6% °C) even at the microscopic scale, which endows these materials a great potential as thermosensitive smart polymers for photothermal imaging.

A compact-rigid multi-analyser for energy and angle filtering of high-resolution X-ray experiments. Part 2. Efficiency of a single-crystal-comb

Diffraction instruments using filtering by one or several analyser crystals exist since the 1980s and 1990s at synchrotron radiation sources, but, due to its low efficiency, this filtering is little used on laboratory sources. In order to overcome this limitation, the efficiency of a small diffraction filtering multi-analyzer block (MAD block) realized with a `single-crystal-comb' curved on a rigid support is demonstrated here. The geometry of this curved surface is logarithmic spiral and is optimized to allow multi-filtering over a relatively important diffraction angular range and to be also applicable over an X-ray spectral range. The efficiency of such a small rigid-compact MAD block consisting of this single-crystal-comb generating 20-50 Si(111) single-crystal blades, associated with a block of Soller collimators, is demonstrated. The angle between each crystal is 0.1°, so the measurement range of the comb is 2-5°. The geometry of this system has been optimized for operation with a synchrotron X-ray source over an energy range of 22 keV to 46 keV and could be used with laboratory X-ray sources (Ag Kα<sub>1</sub>, 22.1 keV). This MAD block complements and exploits the qualities of the `photon-counting' detectors which have very low intrinsic noise. Their joint efficacy is supported by powder pattern measurements of a LaB₆ reference sample and of several heterogeneous samples of cultural heritage materials, carried out at 22 keV on the D2AM beamline at the ESRF. Their signal-to-noise ratio is excellent (1000/1) and allows the detection thresholds of the measurements (from 3-1% to 0.1%) to detect minor phases in the studies of `real' heterogeneous materials to be drastically improved.

A new high temperature, high heating rate, low axial gradient capillary heater

A new heater design, capable of fast heating and cooling to and from >1000°C, has been developed at the Swiss-Norwegian Beamlines, European Synchrotron Radiation Facility, France. The design uses a SiC head to distribute heat, and resistive Si₃N₄ heat cartridges to provide heat.

A compact-rigid multi-analyser for energy and angle filtering of high-resolution X-ray experiments. Part 1. Principles and implementation

Diffraction and spectroscopy instruments using a filtering process with several analyser crystals have existed for about 30 years at synchrotron radiation sources, but they are difficult to use on laboratory sources. Several diffraction multi-filtering systems for powder diffraction experiments have been studied and optimized, in order to show the relevance, simplicity and efficiency of their implementation. Optical filter systems containing one or many diffracting elements, precisely positioned in a rigid manner on a logarithmic spiral surface and having a stability that allows high resolution and high sensitivity to powder diffraction experiments, have been developed. After having tested prototypes with various geometries, we present in particular the realization of a small rigid-compact multi-analyser comb that allows 20-50 measurements on synchrotron radiation sources to be filtered in parallel, but also and especially that can be adapted on laboratory X-ray sources (Ag Kα₁) to increase by an order of magnitude the intensities and resolutions of the measurements. Such a rigid-compact multi-analyser block can advantageously be associated with `photon-counting' 1D and 2D detectors in order to drastically improve the detection thresholds of powder diffraction measurements to better than 0.1%, which allows the detection/quantification/analysis of minor phases in studies of `real' complex materials.

The Anatase-to-Rutile Phase Transition in Highly Oriented Nanoparticles Array of Titania with Photocatalytic Response Changes

An array of highly oriented anatase nanoparticles was successfully prepared from NH₄TiOF₃ with the assistance of polyetheleneglycol-400 at 450 °C. The study showed the stability of obtained layered TiO₂-anatase close to 1200 °C. This research confirmed for the first time that the transition of mesocrystalline anatase to the rutile phase occurs between 1000 °C and 1200 °C, which is more than 400 °C higher than the transition of bulk TiO₂ due to the used precursor. A small quantity of K-phase nanowhiskers, which issued after 800 °C in the composite based on TiO₂, stimulated a fourfold increase in photocatalytic performance. This study offers a new approach to the construction and preparation of effective nanocrystalline photocatalyst.

An embedded interfacial network stabilizes inorganic CsPbI3 perovskite thin films

The black perovskite phase of CsPbI3 is promising for optoelectronic applications; however, it is unstable under ambient conditions, transforming within minutes into an optically inactive yellow phase, a fact that has so far prevented its widespread adoption. Here we use coarse photolithography to embed a PbI2-based interfacial microstructure into otherwise-unstable CsPbI3 perovskite thin films and devices. Films fitted with a tessellating microgrid are rendered resistant to moisture-triggered decay and exhibit enhanced long-term stability of the black phase (beyond 2.5 years in a dry environment), due to increasing the phase transition energy barrier and limiting the spread of potential yellow phase formation to structurally isolated domains of the grid. This stabilizing effect is readily achieved at the device level, where unencapsulated CsPbI3 perovskite photodetectors display ambient-stable operation. These findings provide insights into the nature of phase destabilization in emerging CsPbI3 perovskite devices and demonstrate an effective stabilization procedure which is entirely orthogonal to existing approaches.

Ionogels Derived from Fluorinated Ionic Liquids to Enhance Aqueous Drug Solubility for Local Drug Administration

Gelatin is a popular biopolymer for biomedical applications due to its harmless impact with a negligible inflammatory response in the host organism. Gelatin interacts with soluble molecules in aqueous media as ionic counterparts such as ionic liquids (ILs) to be used as cosolvents to generate the so-called Ionogels. The perfluorinated IL (FIL), 1-ethyl-3-methylpyridinium perfluorobutanesulfonate, has been selected as co-hydrosolvent for fish gelatin due to its low cytotoxicity and hydrophobicity aprotic polar structure to improve the drug aqueous solubility. A series of FIL/water emulsions with different FIL content and their corresponding shark gelatin/FIL Ionogel has been designed to enhance the drug solubility whilst retaining the mechanical structure and their nanostructure was probed by simultaneous SAXS/WAXS, FTIR and Raman spectroscopy, DSC and rheological experiments. Likewise, the FIL assisted the solubility of the antitumoural Doxorubicin whilst retaining the performing mechanical properties of the drug delivery system network for the drug storage as well as the local administration by a syringe. In addition, the different controlled release mechanisms of two different antitumoral such as Doxorubicin and Mithramycin from two different Ionogels formulations were compared to previous gelatin hydrogels which proved the key structure correlation required to attain specific therapeutic dosages.

Refinement of anomalous dispersion correction parameters in single-crystal structure determinations

Correcting for anomalous dispersion is part of any refinement of an X-ray dif-fraction crystal structure determination. The procedure takes the inelastic scattering in the diffraction experiment into account. This X-ray absorption effect is specific to each chemical compound and is particularly sensitive to radiation energies in the region of the absorption edges of the elements in the compound. Therefore, the widely used tabulated values for these corrections can only be approximations as they are based on calculations for isolated atoms. Features of the unique spatial and electronic environment that are directly related to the anomalous dispersion are ignored, although these can be observed spectroscopically. This significantly affects the fit between the crystallographic model and the measured intensities when the excitation wavelength in an X-ray diffraction experiment is close to an element's absorption edge. Herein, we report on synchrotron multi-wavelength single-crystal X-ray diffraction, as well as X-ray absorption spectroscopy experiments which we performed on the mol-ecular compound Mo(CO)6 at energies around the molybdenum K edge. The dispersive (f') and absorptive (f'') terms of the anomalous dispersion can be refined as independent parameters in the full-matrix least-squares refinement. This procedure has been implemented as a new feature in the well-established OLEX2 software suite. These refined parameters are in good agreement with the independently recorded X-ray absorption spectrum. The resulting crystallographic models show significant improvement compared to those employing tabulated values.

Temperature-dependent swelling transitions in MXene Ti3C2Tx

Swelling is a property of hydrophilic layered materials, which enables the penetration of polar solvents into an interlayer space with expansion of the lattice. Here we report an irreversible swelling transition, which occurs in MXenes immersed in excess dimethyl sulfoxide (DMSO) upon heating at 362-370 K with an increase in the interlayer distance by 4.2 Å. The temperature dependence of MXene Ti₃C₂T_x swelling in several polar solvents was studied using synchrotron radiation X-ray diffraction. MXenes immersed in excess DMSO showed a step-like increase in the interlayer distance from 17.73 Å at 280 K to 22.34 Å above ∼362 K. The phase transformation corresponds to a transition from the MXene structure with one intercalated DMSO layer into a two-layer solvate phase. The transformation is irreversible and the expanded phase remains after cooling back to room temperature. A similar phase transformation was observed also for MXene immersed in a 2 : 1 H₂O : DMSO solvent ratio but at a lower temperature. The structure of MXene in the mixed solvent below 328 K was affected by the interstratification of differently hydrated (H₂O)/solvated (DMSO) layers. Above the temperature of the transformation, the water was expelled from MXene interlayers and the formation of a pure two-layer DMSO-MXene phase was found. No changes in the swelling state were observed for MXenes immersed in DMSO or methanol at temperatures below ambient down to 173 K. Notably, MXenes do not swell in 1-alcohols larger than ethanol at ambient temperature. Changing the interlayer distance of MXenes by simple temperature cycling can be useful in membrane applications, e.g. when a larger interlayer distance is required for the penetration of ions and molecules into membranes. Swelling is also very important in electrode materials since it allows penetration of the electrolyte ions into the interlayers of the MXene structure.

Abrupt change from moderate positive to colossal negative thermal expansion caused by imidazolate composite formation

This work describes temperature-induced crystallization processes and reaction mechanisms occurring in the borohydride-imidazolate system. In the course of thermal evolution, crystal structures of two novel bimetallic imidazolates AMnIm₃ (A = Na, K) were solved using synchrotron radiation powder diffraction data. Both the alkali metal cation and the Mn cations exhibit distorted octahedral coordination while each imidazolate is surrounded by two alkali metal and two manganese atoms. Extensive study of the thermal expansion behaviour revealed that the expansion of the bimetallic imidazolates does not proceed uniformly over the entire temperature range but rather abruptly changes from a colossal negative to a moderate positive volume expansion. Such behaviour is caused by the coherent intergrowth of the coexisting phases which form a composite, a positive lattice mismatch and a tensile strain during the coexistence of NaMIm₃ (M = Mg and Mn) and NaIm or HT-NaIm. Such coherent coalescence of two materials opens the possibility for targeted design of zero thermal expansion materials.

GRAPHICAL ABSTRACT

Crystal structures of AMnIm₃ (A = Na, K) were determined. Coherently intergrown NaMIm₃/NaIm (M = Mg, Mn) present colossal negative thermal expansion.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10853-022-07360-z.

Low-frequency lattice vibrations from atomic displacement parameters of α-FOX-7, a high energy density material

Highly anharmonic thermal vibrations may serve as a source of structural instabilities resulting in phase transitions, chemical reactions and even the mechanical disintegration of a material. Ab initio calculations model thermal motion within a harmonic or sometimes quasi-harmonic approximation and must be complimented by experimental data on temperature-dependent vibrational frequencies. Here multi-temperature atomic displacement parameters (ADPs), derived from a single-crystal synchrotron diffraction experiment, are used to characterize low-frequency lattice vibrations in the α-FOX-7 layered structure. It is shown that despite the limited quality of the data, the extracted frequencies are reasonably close to those derived from inelastic scattering, Raman measurements and density functional theory (DFT) calculations. Vibrational anharmonicity is parameterized by the Grüneisen parameters, which are found to be very different for in-layer and out-of-layer vibrations.

Crystal structure, absolute configuration and characteristic temperatures of SmFe3(BO3)4 in the temperature range 11-400 K

The crystal structure of samarium iron borate was analyzed with regard to growth conditions and temperature. The inclusion of about 7% Bi atoms in the crystals grown using the Bi₂Mo₃O₁₂-based flux was discovered and there were no impurities in the crystals grown using the Li₂WO₄-based flux. No pronounced structural features associated with Bi inclusion were observed. The different absolute configurations of the samples grown using both fluxes were demonstrated. Below 80 K, a negative thermal expansion of the c unit-cell parameter was found. The structure of (Sm_0.93Bi_0.07)Fe₃(BO₃)₄ belongs to the trigonal space group R32 in the temperature range 90-400 K. A decrease in the (Sm,Bi)-O, Sm-B, Sm-Fe, Fe-O, Fe-B and Fe-Fe distances is observed with a lowering of the temperature, B1-O does not change, B2-O increases slightly and the B2O₃ triangles deviate from the ab plane. The strongest decrease in the equivalent isotropic atomic displacement parameters (U_eq) with decreasing temperature is observed for atoms Sm and O2, and the weakest is observed for B1. The O2 atoms have the highest U_eq values, the most elongated atomic displacement ellipsoids of all the atoms and the smallest number of allowed vibrational modes of all the O atoms. The largest number of allowed vibrational modes and the strongest interactions with neighbouring atoms is seen for the B atoms, and the opposite is seen for the Sm atoms. The quadrupole splitting Δ(T) of the paramagnetic Mössbauer spectra increases linearly with cooling. The Néel temperature [T_N = 31.93 (5) K] was determined from the temperature dependence of the hyperfine magnetic field B_hf(T), which has a non-Brillouin character. The easy-plane long-range magnetic ordering below T_N was confirmed.

Preliminary observations of the interplay of radiation damage with spin crossover

Intense synchrotron radiation makes time-resolved structural experiments with increasingly finer time sampling possible. On the other hand, radiation heating, radiation-induced volume change and structural disorder become more frequent. Temperature, volume change and disorder are known to be coupled with equilibrium in molecular spin complexes, balancing between two or more spin state configurations. Combining single-crystal diffraction and synchrotron radiation it is illustrated how the radiation damage and associated effects can affect the spin crossover process and may serve as yet another tool to further manipulate the spin crossover properties.

Orthorhombic charge density wave on the tetragonal lattice of EuAl4

EuAl₄ possesses the BaAl₄ crystal structure type with tetragonal symmetry I4/mmm. It undergoes a charge density wave (CDW) transition at T _CDW = 145 K and features four consecutive antiferromagnetic phase transitions below 16 K. Here we use single-crystal X-ray diffraction to determine the incommensurately modulated crystal structure of EuAl₄ in its CDW state. The CDW is shown to be incommensurate with modulation wave vector q = (0,0,0.1781 (3)) at 70 K. The symmetry of the incommensurately modulated crystal structure is orthorhombic with superspace group Fmmm(00σ)s00, where Fmmm is a subgroup of I4/mmm of index 2. Both the lattice and the atomic coordinates of the basic structure remain tetragonal. Symmetry breaking is entirely due to the modulation wave, where atoms Eu and Al1 have displacements exclusively along a, while the fourfold rotation would require equal displacement amplitudes along a and b. The calculated band structure of the basic structure and interatomic distances in the modulated crystal structure both indicate the Al atoms as the location of the CDW. The tem-per-ature dependence of the specific heat reveals an anomaly at T _CDW = 145 K of a magnitude similar to canonical CDW systems. The present discovery of orthorhombic symmetry for the CDW state of EuAl₄ leads to the suggestion of monoclinic instead of orthorhombic symmetry for the third AFM state.

Identification of a coherent twin relationship from high-resolution reciprocal-space maps

The theory and algorithm are presented for the assignment of ferroelastic domains to the individual components of split Bragg peaks in high-resolution reciprocal-space maps. The formalism of mechanical compatibility of ferroelastic domains is further developed for the analysis of the geometry of the reciprocal space. The application of the algorithm to the reciprocal-space maps of tetragonal BaTiO₃ and rhombohedral PbZr_1−xTi_xO₃ crystals is demonstrated.

Twinning is a common crystallographic phenomenon which is related to the formation and coexistence of several orientation variants of the same crystal structure. It may occur during symmetry-lowering phase transitions or during the crystal growth itself. Once formed, twin domains play an important role in defining physical properties: for example, they underpin the giant piezoelectric effect in ferroelectrics, superelasticity in ferroelastics and the shape-memory effect in martensitic alloys. Regrettably, there is still a lack of experimental methods for the characterization of twin domain patterns. Here, a theoretical framework and algorithm are presented for the recognition of ferroelastic domains, as well as the identification of the coherent twin relationship using high-resolution reciprocal-space mapping of X-ray diffraction intensity around split Bragg peaks. Specifically, the geometrical theory of twinned ferroelastic crystals [Fousek & Janovec (1969). J. Appl. Phys.40, 135–142] is adapted for the analysis of the X-ray diffraction patterns. The necessary equations are derived and an algorithm is outlined for the calculation of the separation between the Bragg peaks, diffracted from possible coherent twin domains, connected to one another via a mismatch-free interface. It is demonstrated that such separation is always perpendicular to the planar interface between mechanically matched domains. For illustration purposes, the analysis is presented of the separation between the peaks diffracted from tetragonal and rhombohedral domains in the high-resolution reciprocal-space maps of BaTiO₃ and PbZr_1−xTi_xO₃ crystals. The demonstrated method can be used to analyse the response of multi-domain patterns to external perturbations such as electric field, change of temperature or pressure.

Fast Lead-Free Humidity Sensor Based on Hybrid Halide Perovskite

An environmentally friendly analog of the prominent methylammonium lead halide perovskite, methylammonium bismuth bromide (MA3Bi2Br9), was prepared and investigated in the form of powder, single crystals and nanowires. Complete characterization via synchrotron X-ray diffraction data showed that the bulk crystal does not incorporate water into the structure. At the same time, water is absorbed on the surface of the crystal, and this modification leads to the changes in the resistivity of the material, thus making MA3Bi2Br9 an excellent candidate for use as a humidity sensor. The novel sensor was prepared from powder-pressed pellets with attached carbon electrodes and was characterized by being able to detect relative humidity over the full range (0.7–96% RH) at ambient temperature. Compared to commercial and literature values, the response and recovery times are very fast (down to 1.5 s/1.5 s).

Characterization of Tuna Gelatin-Based Hydrogels as a Matrix for Drug Delivery

The skin of yellowfin tuna is one of the fishery industry solid residues with the greatest potential to add extra value to its circular economy that remains yet unexploited. Particularly, the high collagen content of fish skin allows generating gelatin by hydrolysis, which is ideal for forming hydrogels due to its biocompatibility and gelling capability. Hydrogels have been used as drug carriers for local administration due to their mechanical properties and drug loading capacity. Herein, novel tuna gelatin hydrogels were designed as drug vehicles with two structurally different antitumoral model compounds such as Doxorubicin and Crocin to be administrated locally in tissues with complex human anatomies after surgical resection. The characterization by gel permeation chromatography (GPC) of purified gelatin confirmed their heterogeneity composition, exhibiting three major bands that correspond to the β and α chains along with high molecular weight species. In addition, the Fourier Transform Infrared (FT-IR) spectra of gelatin probed the secondary structure of the gelatin showing the simultaneous existence of α helix, β sheet, and random coil structures. Morphological studies at different length scales were performed by a multi-technique approach using SAXS/WAXS, AFM and cryo-SEM that revealed the porous network formed by the interaction of gelatin planar aggregates. In addition, the sol-gel transition, as well as the gelation point and the hydrogel strength, were studied using dynamic rheology and differential scanning calorimetry. Likewise, the loading and release profiles followed by UV-visible spectroscopy indicated that the novel gelatin hydrogels improve the drug release of Doxorubicin and Crocin in a sustained fashion, indicating the structure-function importance in the material composition.

Study of the Temperature- and Pressure-Dependent Structural Properties of Alkali Hydrido-closo-borate Compounds

In this work, we report on the structural properties of alkali hydrido-closo-(car)borates, a promising class of solid-state electrolyte materials, using high-pressure and temperature-dependent X-ray diffraction experiments combined with density functional theory (DFT) calculations. The mechanical properties are determined via pressure-dependent diffraction studies and DFT calculations; the shear moduli appear to be very low for all studied compounds, revealing their high malleability (that can be beneficial for the manufacturing and stable cycling of all-solid-state batteries). The thermodiffraction experiments also reveal a high coefficient of thermal expansion for these materials. We discover a pressure-induced phase transition for K₂B₁₂H₁₂ from Fm3̅ to Pnnm symmetry around 2 GPa. A temperature-induced phase transition for Li₂B₁₀H₁₀ was also observed for the first time by thermodiffraction, and the crystal structure determined by combining experimental data and DFT calculations. Interestingly, all phases of the studied compounds (including newly discovered high-pressure and high-temperature phases) may be related via a group–subgroup relationship, with the notable exception of the room-temperature phase of Li₂B₁₀H₁₀.

Herein, we study the pressure and temperature dependencies of alkali hydrido-closo-borates in extracting the mechanical properties of this class of compounds that have a promising future as solid electrolytes. In our research, we have discovered and determined two new high-pressure and high-temperature crystal structures.

On the Crystal Chemistry of Photochromic Yttrium Oxyhydride

Yttrium oxyhydride exhibits photochromic properties at ambient temperature and pressures. Although oxygen plays an important role in determining the optoelectronic properties of the material, the question remains open regarding the site that it occupies in the crystal structure. In this paper, we address the issue by synchrotron radiation and neutron powder diffraction measurements. We report that the oxide anions occupy tetrahedral sites together with hydride anions in the face-centered cubic structure.

FOX-7 high-energy-density material: thermal expansion and phase transitions revisited

Variable-temperature single-crystal diffraction experiments treated with the Gandolfi method reveal the detailed temperature evolution of the unit-cell dimensions, structural transformations and the phase co-existence of the energetic material FOX-7. Two first-order phase transitions are observed accompanied by abrupt changes in volume and unit-cell dimensions. The thermal expansion is found to be linear for all three phases, albeit highly anisotropic. Moreover, the experimental thermal expansion coefficients differ from those predicted from literature atomistic simulations.