Coffee Oil Extraction Methods: A Review

Green and roasted coffee oils are products rich in bioactive compounds, such as linoleic acid and the diterpenes cafestol and kahweol, being a potential ingredient for food and cosmetic industries. An overview of oil extraction techniques most applied for coffee beans and their influence on the oil composition is presented. Both green and roasted coffee oil extractions are highlighted. Pressing, Soxhlet, microwave, and supercritical fluid extraction were the most used techniques used for coffee oil extraction. Conventional Soxhlet is most used on a lab scale, while pressing is most used in industry. Supercritical fluid extraction has also been evaluated mainly due to the environmental approach. One of the highlighted activities in Brazilian agribusiness is the industrialization of oils due to their increasing use in the formulation of cosmetics, pharmaceuticals, and foods. Green coffee oil (raw bean) has desirable bioactive compounds, increasing the interest of private companies and research institutions in its extraction process to preserve the properties contained in the oils.

Utilization of low-grade walnut kernels for oil extraction using eco-friendly methods: a comparative analysis of oil composition, antioxidant and antimicrobial activity

Walnut oil was extracted using three different eco-friendly extraction methods, solvent extraction (using ethyl acetate [EA] and ethanol [ET]), aqueous enzymatic extraction (AEE), and ultrasound-assisted enzymatic extraction (UAEE), and their lipid yield, lipid composition, physicochemical analysis, mineral composition, total phenols, antioxidant capacity, and antimicrobial activity were analyzed and compared. The AEE technique offered a greater yield (50.6%) than the other extraction methods and gave comparatively higher linoleic acid (66.12%) content. Palmitic, oleic, linoleic, linolenic, and stearic acids were the principal components that GC/MS detected in all the oil samples. UAEE produced the most polyphenols (0.49 mgGAE/g), followed by AEE (0.46 mgGAE/g), EA (0.45 mgGAE/g), and ET (0.35 mgGAE/g). The DPPH assay results were in the order of UAEE (191 μmolTE/kg) > AEE (186 μmolTE/kg) > EA (153 μmolTE/kg) > ET (130 μmolTE/kg). The FRAP assay findings showed a similar pattern: UAEE (112 molTE/kg) > AEE (102 molTE/kg) > EA (96 molTE/kg) > ET (82 molTE/kg). Results suggested that for a higher extraction yield, AEE is the better technique and UAEE is the recommended method for enhancing walnut oil antioxidant capacity. Additionally, it was found that polyphenols considerably increased the antioxidant capacity of walnut oil and are thought to be health-promoting. The results demonstrated the antibacterial effectiveness of the extracted oil against Bacillus subtilis, Bacillus licheniformis, and Staphylococcus aureus. This study provides information about low-cost and ecofriendly technologies of walnut oil extraction for food, cosmetic, and medical uses.

Effect of microwave (MW)-subcritical extraction on oil recovery, oxidative stability, and lipid types from Katsuwonus pelamis livers

Katsuwonus pelamis is a tuna species mostly sold for canned fillets, its livers were lack of utilization. This study thus investigated an oil production method combining microwave (MW) pretreatment and subcritical dimethyl ether (SDME) in aim to reach improved efficiency and oil quality. The heating characteristics from different MW powers (400, 600, and 800 W) were evaluated, and SEM showed MW having hydrolysis effect on matrix lipoprotein, the fortified recovery rate was also found. Under the MW-SDME condition with 600 W power, 1:5 solid-to-liquid ratio, and 100 min, the recovery reached 93.21% in maximal (SDME ∼50%). To further improve quality, MW powers was noticed affecting lipid types, fatty acid composition, and oxidative stability of produced oils. 1286 lipid types (mostly glyceride and phospholipid-type) were identified, while higher MW lowered the emulsifying phospholipids prompting phase separation. Several oxidation indexes consistently increased with the rising MW power, GC-MS suggested 400 W for higher DHA.

Unveiling the Chemistry of Citrus Peel: Insights into Nutraceutical Potential and Therapeutic Applications

The recent millennium has witnessed a notable shift in consumer focus towards natural products for addressing lifestyle-related disorders, driven by their safety and cost-effectiveness. Nutraceuticals and functional foods play an imperative role by meeting nutritional needs and offering medicinal benefits. With increased scientific knowledge and awareness, the significance of a healthy lifestyle, including diet, in reducing disease risk is widely acknowledged, facilitating access to a diverse and safer diet for longevity. Plant-based foods rich in phytochemicals are increasingly popular and effectively utilized in disease management. Agricultural waste from plant-based foods is being recognized as a valuable source of nutraceuticals for dietary interventions. Citrus peels, known for their diverse flavonoids, are emerging as a promising health-promoting ingredient. Globally, citrus production yields approximately 15 million tons of by-products annually, highlighting the substantial potential for utilizing citrus waste in phyto-therapeutic and nutraceutical applications. Citrus peels are a rich source of flavonoids, with concentrations ranging from 2.5 to 5.5 g/100 g dry weight, depending on the citrus variety. The most abundant flavonoids in citrus peel include hesperidin and naringin, as well as essential oils rich in monoterpenes like limonene. The peel extracts exhibit high antioxidant capacity, with DPPH radical scavenging activities ranging from 70 to 90%, comparable to synthetic antioxidants like BHA and BHT. Additionally, the flavonoids present in citrus peel have been found to have antioxidant properties, which can help reduce oxidative stress by 30% and cardiovascular disease by 25%. Potent anti-inflammatory effects have also been demonstrated, reducing inflammatory markers such as IL-6 and TNF-α by up to 40% in cell culture studies. These findings highlight the potential of citrus peel as a valuable source of nutraceuticals in diet-based therapies.

A critical review of the bioactive ingredients and biological functions of camellia oleifera oil

Camellia oleifera oil is a pure and natural high-grade oil prevalent in South China. Camellia oleifera oil is known for its richness in unsaturated fatty acids and high nutritional value. There is increasing evidence indicating that a diet rich in unsaturated fatty acids is beneficial to health. Despite the widespread production of Camellia oleifera oil and its bioactive components, reports on its nutritional components are scarce, especially regarding systematic reviews of extraction methods and biological functions. This review systematically summarized the latest research on the bioactive components and biological functions of Camellia oleifera oil reported over the past decade. In addition to unsaturated fatty acids, Camellia oleifera oil contains six main functional components contributing to its antioxidant, antibacterial, anti-inflammatory, antidiabetic, anticancer, neuroprotective, and cardiovascular protective properties. These functional components are vitamin E, saponins, polyphenols, sterols, squalene, and flavonoids. This paper reviewed the biological activity of Camellia oleifera oil and its extraction methods, laying a foundation for further development of its bioactive components.

Extracting bioactive compounds and proteins from Bacopa monnieri using natural deep eutectic solvents

This study employed novel extraction methods with natural deep eutectic solvents (NADES) to extract bioactive compounds and proteins from Bacopa monnieri leaves. The conditional influence of ultrasonic-assisted extraction (UAE), microwave-assisted extraction (MAE), and enzymatic-assisted extraction (EAE) on the recovery efficiency of phenolics, proteins, flavonoids, and terpenoids was evaluated. The conditions of UAE were 50 mL/g LSR, 600W of ultrasonic power, and 30% water content with 40°C for 1 min to obtain the highest bioactive compounds and protein contents. The conditions of MAE were 40 mL/g LSR, 400W of microwave power with 30% water content for 3 min to reach the highest contents of biological compounds. The conditions of EAE were 30 mL/g of LSR, 20 U/g of enzyme concentration with L-Gly-Na molar ratio at 2:4:1, and 40% water content for 60 min to acquire the highest bioactive compound contents. Scanning electron microscopy (SEM) is employed to analyze the surface of Bacopa monnieri leaves before and after extraction. Comparing seven extraction methods was conducted to find the most favorable ones. The result showed that the UMEAE method was the most effective way to exploit the compounds. The study suggested that UMEAE effectively extracts phenolics, flavonoids, terpenoids, and protein from DBMP.

Biodiesel production in India: Prospects, challenges, and sustainable directions

Biodiesel has the potential to serve as a feasible substitute for fossil fuels in many sectors, including transportation and internal combustion engines, without requiring extensive modifications. UsinHemg alternative energy sources, including biodiesel, is necessary to effectively tackle the growing demand predominantly observed in the transportation sector. This review is aimed to examine the technological progress, potential benefits, obstacles, and prospects associated with using biodiesel in India. India exhibits a significant potential for biodiesel production due to the abundance of various biofuel crops within its territory. The information supplied includes recent information from official government reports and literature. Collaborative efforts among all stakeholders in the energy industry can achieve the realization of reducing imports of petroleum-based fuel. However, it is essential to consider several significant elements specific to the Indian context when considering the utilization of biodiesel. The reported findings in this research are expected to shed light on the current and prospects of biodiesel deployment in India.

Impact of thermal and nonthermal process intensification techniques on yield and quality of virgin coconut oil

Virgin coconut oil (VCO) is valued for its nutraceutical potential. The focus of this research was to assess the effect of selected thermal and nonthermal pre-treatments on the yield and quality of subsequently wet-extracted VCO. The fresh coconut cream was subjected to microwave heating (450 W, 2 min), ohmic heating (180 V, 5 min), ultrasonication (350 W, 10 min), or a pulsed electric field (40 kV cm-1, 12.32 min). The thick cream was separated, and VCO was obtained after a freeze-thaw process. The highest VCO yields (>93%) were observed in the cases of ultrasonicated and pulsed electric field-treated samples. A range of oil quality parameters, total phenolic content, and antioxidants were evaluated. Further, the fatty acid composition of all oils was studied. Observations from this research indicate that ultrasonication pre-treatment resulted in the best VCO yield and quality.

Optimization of ultrasound-assisted extraction of fatty acids from royal jelly and its effect on the structural and antioxidant property

Fatty acids are the key active components in royal jelly (RJ) with various biological activities. In this study, a novel ultrasound-assisted extraction (UAE) method was established to extract fatty acids from RJ and their structural and antioxidant property were further evaluated. The optimum extraction conditions were as follows: liquid-to-solid ratio of 10:1, ultrasonic power of 450 W and ultrasonic duration of 20 min, resulting in a better extraction yield of 16.48 % and 10-hydroxy-2(E)-decenoic acid (10-HDA) content of 4.12 %. Furthermore, compared with the solvent extraction method, the antioxidant activity of extract by ultrasound was enhanced significantly by at least 448 %. GC-MS showed that ultrasound didn't change the chemical composition of fatty acids, while it significantly increased the content of fatty acids. SEM image illustrated that extracts by UAE showed a rougher, looser microstructure compared to the solvent method. Overall, UAE is a promising method to obtain fatty acids in RJ with high efficiency.

Ultrasonic-ethanol pretreatment assisted aqueous enzymatic extraction of hemp seed oil with low Δ9-THC

In this study, ultrasonic-ethanol pretreatment combined with AEE was developed for oil extraction from hemp seeds. The oil yield reached a maximum of 23.32 % at 200 W ultrasonic power and 30 min ultrasonic time, at this point, the degradation rate of Δ9-THC was 83.11 %. By determining the composition of hemp seed before and after pretreatment, it was shown that ultrasonic-ethanol pretreatment reduced the protein content of the raw material. An enzyme mixture consisting of pectinase and hemicellulase (1/1/1, w/w/w) was experimentally determined to be used, and the AEE extraction conditions were optimized using the Plackett-Burman design and the Box-Behnken. The optimal conditions were determined to be pH 5, total enzyme activity of 37,800 U/g, liquid-solid ratio of 10.4 mL/g, enzyme digestion temperature of 32 °C, enzymatic time of 189 min, and oil recovery of 88.38 %. The results of confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM) showed that the emulsion formed during ultrasonic ethanol pretreatment was not uniformly distributed, and the droplets appeared to be aggregated; and the irregular pores of hemp seed increased after pretreatment. The contents of Δ9-THC and CBN in the extracted oil samples were 9.58 mg/kg and 52.45 mg/kg, respectively. Compared with the oil extracted by Soxhlet extraction (SE), the oil extracted by this experimental method was of better quality and similar in fatty acid composition.

Marine Animal Co-Products-How Improving Their Use as Rich Sources of Health-Promoting Lipids Can Foster Sustainability

Marine lipids are recognized for their-health promoting features, mainly for being the primary sources of omega-3 fatty acids, and are therefore critical for human nutrition in an age when the global supply for these nutrients is experiencing an unprecedent pressure due to an ever-increasing demand. The seafood industry originates a considerable yield of co-products worldwide that, while already explored for other purposes, remain mostly undervalued as sustainable sources of healthy lipids, often being explored for low-value oil production. These co-products are especially appealing as lipid sources since, besides the well-known nutritional upside of marine animal fat, which is particularly rich in omega-3 polyunsaturated fatty acids, they also have interesting bioactive properties, which may garner them further interest, not only as food, but also for other high-end applications. Besides the added value that these co-products may represent as valuable lipid sources, there is also the obvious ecological upside of reducing seafood industry waste. In this sense, repurposing these bioresources will contribute to a more sustainable use of marine animal food, reducing the strain on already heavily depleted seafood stocks. Therefore, untapping the potential of marine animal co-products as valuable lipid sources aligns with both health and environmental goals by guaranteeing additional sources of healthy lipids and promoting more eco-conscious practices.

Antimicrobial Properties Related to Anti-Acne and Deodorant Efficacy of Hedychium coronarium J. Koenig Extracts from Pulsed Electric Field Extraction

This study investigated the potential of pulsed electric field (PEF) extraction in enhancing the antimicrobial properties related to anti-acne and deodorant properties of Hedychium coronarium extract. The dried leaf and rhizome of H. coronarium were extracted using 95% v/v ethanol through both conventional solvent extraction and PEF extraction techniques (10, 14, and 20 kV/cm). The chemical composition of the extracts was analyzed. The antimicrobial activities, specifically in relation to acne treatment against Cutibacterium acnes and deodorant properties against Staphylococcus aureus, Bacillus subtilis, Micrococcus luteus, Pseudomonas aeruginosa, and Escherichia coli, were determined. The irritation profile of was evaluated using the hen's egg chorioallantoic membrane test. The results showed that PEF extraction increased the extract yield, particularly at an electric field strength of 20 kV/cm. Furthermore, PEF extraction significantly enhanced the ellagic acid content, particularly in the leaf extract. Furthermore, the leaf extract demonstrated stronger inhibitory effects against microorganisms associated with body odor and acne compared to the rhizome extract. Notably, all extracts exhibited no signs of irritation, indicating their safety. Overall, the findings suggest that PEF extraction from H. coronarium enhances yield, bioactive compound content, and antimicrobial effects. This indicates the potential of the extract for acne treatment and deodorant use.

The use of small diameter nozzles in temperature-controlled hemp oil extraction allows high oil yields and good quality residual hemp cake feed

The use of two nozzle diameters (6 and 8 mm) in a cold (50°C) hemp seed oil extraction process was evaluated in terms of extraction efficiency, and chemical composition and in vitro fermentation characteristics of the residual cake. Seeds of the varieties Futura 75 and Uso 31 were pressed using a mechanical press with a cooling device. Five pressings were carried out for each variety and nozzle size, the functional parameters of the extraction processes were recorded, and sample of the residual cakes (n = 20) were analyzed. The 6 mm nozzle determined a higher oil yield (+4%) with a limited increase in temperature in the pressing chamber and in the oil (on average + 3°C compared to the 8 mm nozzle). A lower oil yield and consequently a higher fat content in the corresponding cake was observed when using the 8 mm nozzle. Despite the similar fat content, the two varieties had different oil yields and different residual cake compositions. The gas production kinetic of cakes was influenced by variety but little by nozzle size. Overall, the use of a smaller nozzle in a temperature-controlled extraction process can be a useful option to increase hemp oil yield while maintaining good fermentation characteristics of the residual cakes as ruminant feed.

Combined Effect of Protease, Hemicellulase and Pectinase on the Quality of Hemp Seed Oil (Cannabis sativa L.) Obtained by Aqueous Enzymatic Extraction as an Eco-friendly Method

The objective of this research was to evaluate the efficiency of aqueous enzymatic extraction (AEE) to obtain oil from hemp seeds (Cannabis sativa L.) grown in northern Morocco. Optimisation of AEE extraction parameters, including pH, enzyme concentration (hemicellulase, protease and pectinase), temperature and incubation time, to maximize oil yield was achieved using response surface methodology with a central composite design. For comparison, the solvent extraction (Soxhlet) (SE) method was also used. Optimized hydrolysis conditions involved incubation for 4 hours at 60°C with a pH of 6.5, using a multi-enzyme preparation comprising protease, hemicellulase and pectinase at concentrations of 55, 202.5 and 234 U/mg, respectively. Referring to the conventional Soxhlet extraction (SE), Aqueous Enzymatic Extraction (AEE) achieved a 30.65% oil recovery rate under the optimized parameters mentioned above. The use of enzymes produced an oil that was more stable against oxidation than the solvent-extracted oil, with a peroxide value (PV) of 19.54 and 47.87 meq O 2 /kg, respectively. Furthermore, HPLC-DAD analysis of tocopherol content indicated a higher total tocopherol content (547.2 mg/kg) in Aqueous Enzymatic Extraction (AEE) compared to Soxhlet Extraction (SE) (513.51 mg/kg), with γ-tocopherol being the predominant form. No significant differences in fatty acid composition were observed between the two extraction methods with linoleic acid and alpha-linolenic acid being the predominant constituents.

Virgin Camellia Seed Oil Improves Glycolipid Metabolism in the Kidney of High Fat-Fed Rats through AMPK-SREBP Pathway

Camellia seed oil (CO) is used as edible oil in southern China because of its excellent fatty acid composition and abundant bioactive compounds. Chronic kidney disease (CKD) is one of the most common chronic degenerative diseases in China, and active compounds in vegetable oil, like virgin olive oil, have been demonstrated to be efficacious in the management of CKD. In this study, virgin CO was refined using a standard process. The refining had minimal impact on the fatty acid composition, but significantly reduced the presence of bioactive compounds like polyphenols in CO. Sprague-Dawley (SD) rats fed with high fat diet (Group G) were treated with either virgin (Group Z) or refined CO (Group R). The oral administration of CO alleviated lipid accumulation and decreased body and kidney weight gain. Furthermore, treatment with virgin CO increased the renal ATP content. The renal expression levels of AMPK and key enzymes involved in fatty acid oxidation (CPT-1 and ACOX1) and glycolysis (HK, PFK, PK and GAPDH) were up-regulated in Group Z, thereby enhancing the ATP production. Virgin CO treatment downregulated the expression level of SREBP2 and its downstream target genes, such as ACC, FAS, and HMGCR, which reduced lipid synthesis. These findings indicate that virgin CO improves glycolipid metabolism and restores energy homeostasis in the kidneys of rats fed with a high-fat diet by modulating the AMPK-SREBP-signaling pathway, suggesting the potential of active compounds in virgin CO for managing the renal failure associated with glycolipid dysmetabolism.

Advances in efficient extraction of essential oils from spices and its application in food industry: A critical review

With the increase of people's awareness of food safety, it is crucial to find natural and green antimicrobial agents to replace traditional antimicrobial agents. Essential oils of spices (SEOs) are low toxicity or nontoxic, which exhibited antioxidants and antimicrobial activity according to many in vitro and in situ experiments. Spices are widely available and low cost as a plant raw material for the extraction of SEOs. This review summarized highly efficient extraction techniques for SEOs, such as physical field assisted extraction technology, supercritical fluid extraction, and biological-based techniques. Furthermore, purification of SEOs and components were also recapitulated. Purification techniques of SEOs improve their utilization value due to the increased content of bioactive components. Finally, the review concentrated on the applications of SEOs in food industry, including food preservation, food active packaging by means of films or coatings, antioxidant properties. In addition, addressing the problem of unstability of SEOs and its role to inhibit the pathogenic bacteria, the encapsulation of SEOs for use in the food industrial sectors reduces the safety risk to human health.

Synthesis of dietary lipids from pumpkin (Cucurbita pepo. L) oil obtained by enzymatic extraction: a sustainable approach

This study aimed to assess the nutritional properties of dietary lipids obtained through the modification of aqueous enzymatically extracted pumpkin seed (Cucurbita pepo. L) oil. The optimal growth conditions for producing pectinase using strain Aspergillus sp. 391 were determined, and partial characterization of pectinase and commercial cellulase was conducted. The enzymatic extraction was performed at pH 4.0, 50 °C, for 24 h, using a combination of pectinase and cellulase for optimum effectiveness. The crude oil obtained was analyzed for acid, peroxide, and fatty acid composition. The study found a high amount of unsaturated fatty acids, mainly linoleic acid (C18:2), and a 59% oil recovery rate. Subsequently, this oil was subjected to enzymatic acidolysis with capric acid in solvent-free media, catalyzed by lipase Lipozyme RM IM®, resulting in a product with a higher incorporation degree (48.39 ± 0.5 mol%), observed after 24 h at 60 °C using molar ratio oil:acid capric of 1:9 (run 4). The nutritional properties of this oil were improved.

High-oleic rapeseed oil quality indicators and endogenous antioxidant substances under different processing methods

This study exposed high-oleic rapeseed oil (HORO) to different pretreatment (microwave or roasting) and processing methods to investigate (cold pressing, hexane extraction, subcritical butane extraction, and aqueous enzymatic extraction) the effects of processing technologies on HORO parameters associated with its physicochemical properties, endogenous antioxidant substances, and antioxidant capacity. The oil yield of various processing technologies was between 35.4% and 59.7%, and the fatty acid composition did not significantly differ. Hierarchical clustering and principal component analyses were used for evaluation. The results revealed that the microwave pretreatment-hexane extraction (M-HE) method resulted in significantly higher levels of tocopherols (688.4 mg/kg), polyphenols (1007.76 mg/kg), and phytosterols (1810.6 mg/kg) in HORO, implying strong free radical scavenging capacity (DPPH-oil: 79.63, DPPH-nonpolar: 71.42, DPPH-polar: 6.65, FRAP: 55.4, ABTS: 3043.7 μmol TE/kg). Hence, M-HE is a promising method for producing HORO with a higher stability and nutritional value.

Leading Edge Technologies and Perspectives in Industrial Oilseed Extraction

With the increase in the world's population and per capita wealth, oil producers must not only increase edible oil production but also meet the demand for a higher quality and variety of products. Recently, the focus has shifted from single processing steps to the entire vegetable oil production process, with an emphasis on introducing innovative technologies to improve quality and production efficiency. In this review, conventional methods of oilseed storage, processing and extraction are presented, as well as innovative processing and extraction techniques. Furthermore, the parameters most affecting the products' yields and quality at the industrial level are critically described. The extensive use of hexane for the extraction of most vegetable oils is undoubtedly the main concern of the whole production process in terms of health, safety and environmental issues. Therefore, special attention is paid to environmentally friendly solvents such as ethanol, supercritical CO2, 2-methyloxolane, water enzymatic extraction, etc. The state of the art in the use of green solvents is described and an objective assessment of their potential for more sustainable industrial processes is proposed.

In-depth potential mechanism of combined demulsification pretreatments (isopropanol ultrasonic pretreatments and Ca2+ flow additions) during aqueous enzymatic extractions of Camellia oils

Emulsification is the practical limitation of aqueous enzymatic extractions of Camellia oils. This study aimed to investigate the influence and demulsification mechanisms of isopropanol ultrasonic pretreatments and Ca²⁺ additions on aqueous enzymatic extractions of Camellia oils. Combining isopropanol ultrasonic pretreatments with Ca²⁺ flow additions obtained the highest free oil recovery (78.03 %) and lowest emulsion content (1.5 %). Results indicated that the superior demulsification performance originated from the decrease in emulsion stabilities and formations. First, demulsification pretreatments reduced the oil (14.69 %) and solid (13.21 %) fractions in emulsions to decrease the stability of as-formed emulsions. Meanwhile, isopropanol ultrasonic pretreatments extracted tea saponins (0.38 mg/mL) and polysaccharides (0.23 mg/mL), while Ca²⁺ combined with protein isolates (5.82 mg/mL), tea saponins (7.48 mg/mL) and polysaccharides (0.78 mg/mL) to form precipitates and reduce emulsion formation. This work could promote the practical application of aqueous enzymatic extractions of Camellia oils and enlighten the rise of advanced demulsification pretreatments.

Multifunctional catalyst-assisted sustainable reformation of lignocellulosic biomass into environmentally friendly biofuel and value-added chemicals

Rapid urbanization is increasing the world's energy demand, making it necessary to develop alternative energy sources. These growing energy needs can be met by the efficient energy conversion of biomass, which can be done by various means. The use of effective catalysts to transform different types of biomasses will be a paradigm change on the road to the worldwide goal of economic sustainability and environmental protection. The development of alternative energy from biomass is not easy, due to the uneven and complex components present in lignocellulose; accordingly, the majority of biomass is currently processed as waste. The problems may be overcome by the design of multifunctional catalysts, offering adequate control over product selectivity and substrate activation. Hence, this review describes recent developments involving various catalysts such as metallic oxides, supported metal or composite metal oxides, char-based and carbon-based substances, metal carbides and zeolites, with reference to the catalytic conversion of biomass including cellulose, hemicellulose, biomass tar, lignin and their derivative compounds into useful products, including bio-oil, gases, hydrocarbons, and fuels. The main aim is to provide an overview of the latest work on the use of catalysts for successful conversion of biomass. The review ends with conclusions and suggestions for future research, which will assist researchers in utilizing these catalysts for the safe conversion of biomass into valuable chemicals and other products.

Bioactivities and green advanced extraction technologies of ginger oleoresin extracts: A review

Zingiber officinale Roscoe is an excellent source of bioactive compounds, mainly gingerols and shogaols compounds, that associated with various bioactivities including antioxidant, anticancer, anti-inflammatory, antimicrobial, and antibiofilm. Zingiber officinale Roscoe found its application in the food, pharmaceutical, and cosmeceutical industries. The demand for a high quality of ginger oleoresin extracts based on the contents of gingerols and shogaols compounds for a health-benefit has dramatically increased. Various extraction techniques, including the conventional and advanced extraction techniques for gingerols and shogaols have been reported based on the literature data from 2012 to 2022. The present review examines the functional composition and bioactivities of Zingiber officinale Roscoe and the advanced green extraction technologies. Some variations in the quantity and quality of gingerols and shogaols compounds are because of the extraction method employed. This review provides a depth discussion of the various green advanced extraction technologies and the influences of process variables on the performance of the extraction process. Lower temperature with a short exposure time such as ultrasound-assisted and enzyme-assisted extraction, will lead to high quality of extracts with high content of 6-gingerol. High thermal processing, such as microwave-assisted and pressurized liquid extraction, will produce higher 6-shogaol. Meanwhile, supercritical fluid extraction promotes high quality and the safety of extracts by using non-toxic CO2. In addition, challenges and future prospects of the extraction of ginger oleoresin have been identified and discussed. The emerging green extraction methods and technologies show promising results with less energy input and higher quality extracts than conventional extraction methods.

Blackcurrant (Ribes nigrum L.) Seeds-A Valuable Byproduct for Further Processing

The rational exploitation of byproducts is important from the point of view of their potential applicability in various fields. In this study, the possibility of further processing of blackcurrant seeds (BCs), which are a byproduct of fruit processing, was investigated. BCs were used as a material for the extraction of oil on a semi-industrial scale, and the residues were assessed in terms of their potential application in skin care products. Supercritical fluid extraction (SFE) using CO₂ at pressures of 230 and 330 bar and extraction temperature of 40 °C was exploited for isolation of oil, and the products were characterised taking into account lipophilic constituents. After 120 min, the oil yields were 19.67% and 20.94% using CO₂ at 230 and 330 bar, respectively, which showed that SFE was an effective method on a semi-industrial scale, taking into account the extraction yield. The oils had similar fatty acid compositions with a high percentage of linoleic acid (ca. 43%); however, tocopherols and carotenoids were most abundant in the oil obtained at 230 bar. It was also found that the composition of the SFE oils was comparable with that of cold-pressed oil, which shows that supercritical fluid extraction provides a high-quality product; therefore, it can be an alternative to cold pressing. Furthermore, the chemical compositions of the extracts from the oil isolation residues were established using UPLC-MS, and the impact of the extracts on human skin fibroblasts was assessed using the MTT and NR assays. The quantitative analysis revealed that the residues contained high amounts of polyphenolic acids, including gallic, protocatechuic, and hydroxybenzoic acid derivatives, as well as flavonoids, especially quercetin and kaempferol glucoside. Moreover, it was found that the extracts were nontoxic and exerted a stimulatory effect on cell metabolism. Therefore, they can be a valuable additive to natural plant-based cosmetics. Our results showed that blackcurrant seeds, regarded as a byproduct, can be a valuable material for further use.

Antioxidants from Hyeronima macrocarpa Berries Loaded on Nanocellulose: Thermal and Antioxidant Stability

This study investigated the effect of different storage temperatures (35-55 °C) on the bioactive substances and antioxidant properties of Hyeronima macrocarpa berries loaded on nanocellulose. NC was extracted from banana pseudo-stems and presented an interesting surface and porosity properties. The acidified ethanol extract showed better anthocyanin extraction (1317 mg C3G eq./100 g FW) and was used for the preparation of the powdered product, which presented an intense and uniform magenta color, with CIELAB parameters of L* = 59.16, a* = 35.61, and b* = 7.08. The powder exhibited significant stability at storage temperatures of 35 and 45 °C, in which there was no significant loss of anthocyanins or a decrease in antioxidant capacity. In addition, the color was stable for up to 4 months without adding any preservative agent. The anthocyanin-rich extract of H. macrocarpa reached an estimated shelf-life of 315 days (stored at 35 °C), as a result of the impregnation process between the extract and NC, with the ability to protect the bioactives from degradation, due to NC surface properties.

Effect of novel combination processing technologies on extraction and quality of rice bran oil

Rice bran, a primary by-product from the rice processing industries, containing 10-15% oil, attracts significant attention from consumers due to its many health-promoting effects. The extraction methodology used is one of the most critical factors affecting the quality and yield of oil from rice bran. Using solvents is the current commercial process for rice bran oil extraction, which has its setbacks. It is challenging and expensive, and there is a risk of traces of solvent residue in the oil. Emerging combination extraction technologies offer zero to minimal solvent residues or chemical deformation while considering increasing environmental and energy footprint. Emerging combination processing technologies include new-age methods like supercritical fluid extraction, sub-critical fluid extraction, ultrasound-assisted enzymatic extraction, ohmic heating, and microwave-assisted extraction. These techniques have been reported to extract oil from rice bran, improving extraction efficiency and quality. These techniques demonstrate solid prospects for future applications. The present review discusses and compares these emerging technologies for oil extraction from rice bran commercially.

Extraction of Oils and Phytochemicals from Camellia oleifera Seeds: Trends, Challenges, and Innovations

Camellia seed oil, extracted from the seeds of Camellia oleifera Abel., is popular in South China because of its high nutritive value and unique flavor. Nowadays, the traditional extraction methods of hot pressing extraction (HPE) and solvent extraction (SE) are contentious due to low product quality and high environmental impact. Innovative methods such as supercritical fluid extraction (SCFE) and aqueous extraction (AE) are proposed to overcome the pitfalls of the traditional methods. However, they are often limited to the laboratory or pilot scale due to economic or technical bottlenecks. Optimization of extraction processes indicates the challenges in finding the optimal balance between the yield and quality of oils and phytochemicals, as well as the environmental and economic impacts. This article aims to explore recent advances and innovations related to the extraction of oils and phytochemicals from camellia seeds, and it focuses on the pretreatment and extraction processes, as well as their complex effects on nutritional and sensory qualities. We hope this review will help readers to better understand the trends, challenges, and innovations associated with the camellia industry.

Potential cocoa butter substitute derived from mango seed kernel

The present finding provides a new cocoa butter substitute in confectionary, which is derived from mango by-product (mango seed kernel). The study involves physicochemical characterization and the use of GCMS, FTIR, SEM, TGA, and NMR to prove that mango seed kernel derived fat is a good substitute for cocoa butter. Its texture, organoleptic properties and rancidity were also investigated. Its properties were similar to cocoa butter, with respect to palmitic, oleic, and stearic acids, and it had the ability to substitute 80 per cent of dark chocolate preparation for chocolate substitute. This recently developed cocoa substitute has the potential to address the global problem of cocoa butter scarcity, which is being exacerbated by rising population and improving economies.

An Optimized Terpene Profile for a New Medical Cannabis Oil

The purpose of this analytical study was to develop an advanced formulation of medical Cannabis oil (MCO) comparing the chemical profile of different extracts obtained with two existing methods (SIFAP and CALVI) and one original upgraded (CERFIT) method. Preparation methods were applied with varying solvent, temperature, and duration of the decarboxylation and extraction steps. HPLC-MS/MS TSQ and GC/FID-HS analyses were performed to investigate cannabinoid and terpene contents in the three oil extracts. Cannabinoids profile remained comparable between the formulations. CERFIT extracts exhibited a superior quantity of total terpene hydrocarbon forms (e.g., limonene and α-pinene) with no degradation occurrence (i.e., oxidized terpenes not quantifiable). Thus, this new method optimized the phytochemical profile of the MCO presenting a value opportunity to obtain a standardized high-level therapeutic product.

Formula Development of Red Palm (Elaeis guineensis) Fruit Extract Loaded with Solid Lipid Nanoparticles Containing Creams and Its Anti-Aging Efficacy in Healthy Volunteers

Palm fruits (Elaeis guineensis) comprise antioxidants that can be used as skin care agents. This study developed a cosmeceutical cream containing E. guineensis extract, loaded with solid lipid nanoparticles (SLNs), and assessed its efficacy on female volunteers. The E. guineensis extract exhibited a good antioxidant activity with high levels of vitamin E, β-carotene, and palmitic acid. Day and night creams containing E. guineensis fruit extract, loaded with SLNs, were formulated and exhibited acceptable physical characteristics and good stability. Subsequently, their clinical efficacy and safety were evaluated on female volunteers. Both creams were non-irritating and had good cutaneous compatibility. Skin hydration, transepidermal water loss (TEWL), skin elasticity, melanin index, and skin texture were measured before and 30 min after the first application, as well as after 7, 14, and 30 days of daily application. A satisfactory survey was implemented using a questionnaire, and volunteer satisfaction scores were high for the product’s performance. Overall, the results showed that skin hydration, TEWL, cutaneous elasticity, and melanin index were improved, compared to the baseline data, after 30 days. Thus, the formulated facial day and night creams made the skin moist, reduced wrinkles, increased elasticity, and cleared the skin to the consumers’ satisfaction.

Biodegradation of Polylactic Acid-Based Bio Composites Reinforced with Chitosan and Essential Oils as Anti-Microbial Material for Food Packaging

This study aims to produce and investigate the potential of biodegradable Polylactic Acid (PLA)-based composites mixed with chitosan and Turmeric Essential Oil (TEO) as an anti-microbial biomaterial. PLA has good barrier properties for moisture, so it is suitable for use as a raw material for making packaging and is included in the GRAS (Generally Recognized As Safe). Chitosan is a non-toxic and antibacterial cationic polysaccharide that needs to be improved in its ability to fight microbes. TEO must be added to increase antibacterial properties due to a large number of hydroxyl (-OH) and carbonyl functional groups. The samples were prepared in three different variations: 2 g of chitosan, 0 mL TEO and 0 mL glycerol (Biofilm 1), 3 g of chitosan, 0.3 mL TEO and 0.5 mL of glycerol (Biofilm 2), and 4 g of chitosan, 0.3 of TEO and 0.5 mL of glycerol (Biofilm 3). The final product was characterized by its functional group through Fourier transform infrared (FTIR); the functional groups contained by the addition of TEO are C-H, C=O, O-H, and N-H with the extraction method, and as indicated by the emergence of a wide band at 3503 cm-1, turmeric essential oil interacts with the polymer matrix by creating intermolecular hydrogen bonds between their terminal hydroxyl group and the carbonyl groups of the ester moieties of both PLA and Chitosan. Thermogravimetric analysis (TGA) of PLA as biofilms, the maximum temperature of a biofilm was observed at 315.74 °C in the variation of 4 g chitosan, 0.3 mL TEO, and 0.5 mL glycerol (Biofilm 3). Morphological conditions analyzed under scanning electron microscopy (SEM) showed that the addition of TEO inside the chitosan interlayer bound chitosan molecules to produce solid particles. Chitosan and TEO showed increased anti-bacterial activity in the anti-microbial test. Furthermore, after 12 days of exposure to open areas, the biofilms generated were able to resist S. aureus and E. coli bacteria.

Influence of Fresh Palm Fruit Sterilization in the Production of Carotenoid-Rich Virgin Palm Oil

Palm oil is known to be rich in carotenoids and other phytonutrients. However, the carotenoids and phytonutrients degrade due to high heat sterilization of oil palm fruits. The present study was conducted to produce carotenoid-rich virgin palm oil (VPO) using cold-press extraction. Herein, the influence of sterilization of oil palm fresh fruits in the production of cold-pressed VPO was determined with varying sterilization temperatures, times, and amounts of palm fruits in sterilization. The experimental sterilization conditions were optimized using response surface methodology (RSM) based on the maximum VPO yield and minimum FFAs in cold-pressed VPO. The optimal sterilization experimental conditions of oil palm fruits were determined to be a sterilization temperature of 62 °C, a time of 90 min, and an amount of oil palm fruits of 8 kg. Under these experimental conditions, the maximum cold-pressed VPO yield and the minimal content of free fatty acids (FFAs) obtained were 27.94 wt.% and 1.32 wt.%, respectively. Several analytic methods were employed to determine cold-pressed VPO quality and fatty acids compositions and compared with the crude palm oil. It was found that cold-pressed VPO contains higher carotenoids (708 mg/g) and unsaturated fatty acids compared with the carotenoid (343 mg/g) and fatty acid compositions in CPO. The findings of the present study reveal that the sterilization temperature potentially influences the carotenoid and nutrient contents in VPO; therefore, the optimization of the sterilization conditions is crucial to producing carotenoid- and phytonutrient-rich VPO.

Extraction Methods of Oils and Phytochemicals from Seeds and Their Environmental and Economic Impacts

Over recent years, the food industry has striven to reduce waste, mostly because of rising awareness of the detrimental environmental impacts of food waste. While the edible oils market (mostly represented by soybean oil) is forecasted to reach 632 million tons by 2022, there is increasing interest to produce non-soybean, plant-based oils including, but not limited to, coconut, flaxseed and hemp seed. Expeller pressing and organic solvent extractions are common methods for oil extraction in the food industry. However, these two methods come with some concerns, such as lower yields for expeller pressing and environmental concerns for organic solvents. Meanwhile, supercritical CO2 and enzyme-assisted extractions are recognized as green alternatives, but their practicality and economic feasibility are questioned. Finding the right balance between oil extraction and phytochemical yields and environmental and economic impacts is challenging. This review explores the advantages and disadvantages of various extraction methods from an economic, environmental and practical standpoint. The novelty of this work is how it emphasizes the valorization of seed by-products, as well as the discussion on life cycle, environmental and techno-economic analyses of oil extraction methods.

A Design of Experiment (DoE) Approach to Model the Yield and Chemical Composition of Ajowan (Trachyspermum ammi L.) Essential Oil Obtained by Microwave-Assisted Extraction

Ajowan (Trachyspermum ammi L.) is a spice traditionally used in Middle Eastern medicine and contains a valuable essential oil (EO) exploited in different fields, such as pharmaceutics, agrochemicals and food additives. This EO is mostly characterized by the thymol to which most of its biological properties are related. Given the economic value of ajowan and its increasing demand across the globe, the extraction method used for its EO is of paramount importance in terms of quality and quantity of the final product. In the present study, we used the design of experiment (DoE) approach to study and optimize the extraction of the ajowan EO using the microwave-assisted extraction (MAE), a novel extraction technique with high efficiency, low energy consumption, short process length and low environmental impact. A two-step DoE (screening followed by surface response methodology) was used to reduce the number of experiments and to improve the cost/benefit ratio. Reliable mathematical models, relating the more relevant EO features with the extraction conditions, were obtained and used to identify the best experimental conditions able to maximize the yield and thymol concentration. The optimized MAE procedure assures an EO with a higher yield and thymol amount compared with the standard hydrodistillation procedure.

Comparison of the effect of extraction methods on the quality of green coffee oil from Arabica coffee beans: Lipid yield, fatty acid composition, bioactive components, and antioxidant activity

In this study, ultrasonic/microwave-assisted extraction (UMAE), microwave-assisted extraction (UAE), ultrasound-assisted extraction (UAE), and pressurized liquid extraction (PLE) were applied to extract green coffee oil (GCO), and the physicochemical indexes, fatty acids, tocopherols, diterpenes, and total phenols as well as antioxidant activity of GCO were investigated and compared. The results indicated that the extraction yield of UMAE was the highest (10.58 ± 0.32%), while that of PLE was the lowest (6.34 ± 0.65%), and linoleic acid and palmitic acid were the major fatty acids in the GCO, ranging from 40.67% to 43.77% and 36.57% to 38.71%, respectively. A large proportion of fatty acids and phytosterols were not significantly influenced by the four extraction techniques. However, tocopherols, diterpenes, total phenols, and the free radical scavenging activity were significantly different among these four GCOs. Moreover, structural changes in the coffee residues were explored by scanning electron microscopy and Fourier transform infrared spectroscopy. Overall, the high antioxidant activity of GCO demonstrated that it can be used as a highly economical natural product in the food and agricultural industries.