Incorporation of essential oils and nanoparticles in pullulan films to control foodborne pathogens on meat and poultry products

Alhidary I, Dai S, Israr M, Ullah Khan R. Evaluation of biological selenium nanoparticles on growth performance, histopathology of vital organs and genotoxicity in Japanese quails (coturnix coturnix japonica)

Research on the effects of selenium nanoparticles (Se-NPs), particularly in Japanese quails, is lacking, especially regarding the potential for DNA damage. Therefore, this study aimed to investigate the impact of administering 0.2 and 0.4 mg/kg of Se-NPs on the growth performance, DNA integrity, and histopathological alterations of the liver, lung, kidney, and heart in quails. A total of 480 one-day-old Japanese quails were divided into three experimental groups as follows: Group 1 served as the control and received only basic feed, while Group 2 and 3 received 0.2 mg/kg and 0.4 mg/kg of Se-NPs via oral gavage. Our results suggested that, birds fed with Se-NPs at both levels significantly (p < .01) reduced feed intake, however, weight gain was significantly (p < .01) increased in quails supplemented with 0.2 mg/kg. Similarly, feed conversion ratio (FCR) was significantly (p < .01) reduced in group supplemented with 0.2 mg/kg Se-NPs. White blood cells increased significantly (P0.01) in 0.4 mg/kg while haemoglobin and red cell distribution width decreased (p < .01) in the same group. Both treatment regimens resulted in DNA damage and histopathological alterations; however, the adverse effects were more prominent in the group receiving the higher dose of 0.4 mg/kg. These findings indicate that the lower dose of 0.2 mg/kg may have beneficial effects on growth. However, the higher dose of 0.4 mg/kg not only negatively impacts growth but also leads to histopathological alterations in major organs of the body and DNA damage as well.

Exploring the potential of pullulan-based films and coatings for effective food preservation: A comprehensive analysis of properties, activation strategies and applications

Pullulan is naturally occurring polysaccharide exhibited potential applications for food preservation has gained increasing attention over the last half-century. Recent studies focused on efficient preservation and targeted inhibition using active composite ingredients and advanced technologies. This has led to the emergence of pullulan-based biofilm preservation. This review extensively studied the characteristics of pullulan-based films and coatings, including their mechanical strength, water vapor permeability, thermal stability, and potential as a microbial agent. Furthermore, the distinct characteristics of pullulan, production methods, and activation strategies, such as pullulan derivatization, various compounded ingredients (plant extracts, microorganisms, and animal additives), and other technologies (e.g., ultrasound), are thoroughly studied for the functional property enhancement of pullulan-based films and coatings, ensuring optimal preservation conditions for diverse food products. Additionally, we explore hypotheses that further illuminate pullulan's potential as an eco-friendly bioactive material for food packaging applications. In addition, this review evaluates various methods to improve the efficiency of the film-forming mechanism, such as improving the direct coating process, bioactive packaging films, and implementing layer-by-layer coatings. Finally, current analyses put forward suggestions for future advancement in pullulan-based bioactive films, with the aim of expanding their range of potential applications.

Development and application of fruit and vegetable based green films with natural bio-actives in meat and dairy products: a review

In recent years, foodborne outbreaks and food plastic waste accumulation in the environment have impelled a hunt for new, sustainable, novel and innovatory food packaging interventions to face microbial contamination, food quality and safety. Pollution caused from wastes generated by agricultural activities is one of chief rising concerns of the environmentalists across the globe. A solution to this problem is effective and economic valorization of residues from agriculture sector. It would ensure that the by-products/residues from one activity act as ingredients/raw materials for another industry. An example is fruit and vegetable waste based green films for food packaging. Edible packaging is a well-researched area of science where numerous biomaterials have been already explored. Along with dynamic barrier properties, these biofilms often exhibit antioxidant and antimicrobial properties as function of the bioactive additives (e.g. essential oils) often incorporated in them. Additionally, these films are made competent by use of recent technologies (e.g. encapsulation, nano-emulsions, radio-sensors) to ensure high end performance and meet the principles of sustainability. Livestock products such as meat, poultry and dairy products are highly perishable and depend largely upon the mercy of packaging materials to enhance their shelf life. In this review, all the above-mentioned aspects are thoroughly covered with a view to project fruit and vegetable based green films (FVBGFs) as a potential and viable packaging material for livestock products, along with a discussion on role of bio-additives, technological interventions, properties and potential applications of FVBGFs in livestock products. © 2023 Society of Chemical Industry.

Insight on Incorporation of Essential Oils as Antimicrobial Substances in Biopolymer-Based Active Packaging

The increasing interest in microbiological food safety requires the development of sensitive and reliable analyses and technologies for preserving food products' freshness and quality. Different types of packaging systems are one of the solutions for controlling microbiological activity in foods. During the last decades, the development of biopolymer-based active packaging with essential oil incorporation systems has resulted in technologies with exceptional application potential, primarily in the food industry. There is no doubt that this principle can facilitate food status monitoring, reduce food waste, extend the shelf life, improve the overall quality of food, or indicate a larger problem during the storage, production, and distribution of foodstuffs. On the other hand, most antimicrobial packaging systems are in the development phase, while the sensitivity, selectivity, complexity, and, above all, safety of these materials are just some of the essential questions that need to be answered before they can be widely used. The incorporation of essential oils as antimicrobial substances in biopolymer-based active packaging holds significant promise for enhancing food safety, extending shelf life, and offering more sustainable packaging solutions. While challenges exist, ongoing research and innovation in this field are likely to lead to the development of effective and environmentally friendly packaging systems with enhanced antimicrobial properties.

Trends in Food Pathogens Risk Attenuation

Foodborne pathogens represent one of the most dangerous threats to public health along the food chain all over the world. Over time, many methods were studied for pathogen inhibition in food, such as the development of novel packaging materials with enhanced properties for microorganisms' growth inhibition (coatings, films) and the use of emerging technologies, like ultrasound, radio frequency or microwave. The aim of this study was to evaluate the current trends in the food industry for pathogenic microorganisms' inhibition and food preservation in two directions, namely technology used for food processing and novel packaging materials development. Five technologies were discussed in this study, namely high-voltage atmospheric cold plasma (HVACP), High-Pressure Processing (HPP), microwaves, radio frequency (RF) heating and ultrasound. These technologies proved to be efficient in the reduction of pathogenic microbial loads in different food products. Further, a series of studies were performed, related to novel packaging material development, by using a series of antimicrobial agents such as natural extracts, bacteriocins or antimicrobial nanoparticles. These materials proved to be efficient in the inhibition of a wide range of microorganisms, including Gram-negative and Gram-positive bacteria, fungi and yeasts.

Facile Synthesis, Characterization, and Antimicrobial Assessment of a Silver/Montmorillonite Nanocomposite as an Effective Antiseptic against Foodborne Pathogens for Promising Food Protection

Foodborne pathogens can have devastating repercussions and significantly threaten public health. Therefore, it is indeed essential to guarantee the sustainability of our food production. Food preservation and storage using nanocomposites is a promising strategy. Accordingly, the present research's objectives were to identify and isolate a few foodborne pathogens from food products, (ii) synthesize and characterize silver nanoparticles (AgNPs) using wet chemical reduction into the lamellar space layer of montmorillonite (MMT), and (iii) investigate the antibacterial potential of the AgNPs/MMT nanocomposite versus isolated strains of bacteria. Six bacterial species, including Escherichia coli, Salmonella spp., Pseudomonas aeruginosa, Staphylococcus aureus, Listeria monocytogenes, and Bacillus cereus were isolated from some food products (meat, fish, cheese, and vegetables). The Ag/MMT nanocomposite was synthesized and characterized using UV-visible spectroscopy, transmission electron microscopy, particle size analyzer, zeta potential, X-ray diffraction (XRD), and scanning electron microscopy with dispersive energy X-ray (EDX). The antibacterial effectiveness of the AgNPs/MMT nanocomposite further investigated distinct bacterial species using a zone of inhibition assay and microtiter-based methods. Nanoparticles with a narrow dimension range of 12 to 30 nm were identified using TEM analysis. The SEM was employed to view the sizeable flakes of the AgNPs/MMT. At 416 nm, the most excellent UV absorption was measured. Four silver metallic diffraction peaks were found in the XRD pattern during the study, and the EDX spectrum revealed a strong signal attributed to Ag nanocrystals. AgNPs/MMT figured out the powerful antibacterial action. The AgNPs/MMT nanocomposite confirmed outstanding minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) against six isolates of foodborne pathogens, ranging from 15 to 75 µg/mL, respectively. The AgNPs/MMT's antibacterial potential against gram-negative bacteria was noticeably better than gram-positive bacteria. Therefore, the AgNPs/MMT nanocomposite has the potential to be used as a reliable deactivator in food processing and preservation to protect against foodborne pathogenic bacteria. This suggests that the nanocomposite may be effective at inhibiting the growth and proliferation of harmful bacteria in food, which could help to reduce the risk of foodborne illness.

Antimicrobial Compounds in Food Packaging

This review presents current knowledge on antimicrobial agents that are already used in the food packaging industry. At the beginning, innovative ways of food packaging were discussed, including how smart packaging differs from active packaging, and what functions they perform. Next, the focus was on one of the groups of bioactive components that are used in these packaging, namely antimicrobial agents. Among the antimicrobial agents, we selected those that have already been used in packaging and that promise to be used elsewhere, e.g., in the production of antimicrobial biomaterials. Main groups of antimicrobial agents (i.e., metals and metal oxides, organic acids, antimicrobial peptides and bacteriocins, antimicrobial agents of plant origin, enzymes, lactoferrin, chitosan, allyl isothiocyanate, the reuterin system and bacteriophages) that are incorporated or combined with various types of packaging materials to extend the shelf life of food are described. The further development of perspectives and setting of new research directions were also presented.

Application of intelligent packaging for meat products: A systematic review

BACKGROUND

Today, in response to consumer demand and market trends, the development of new packaging with better performance such as intelligent packaging has become more important. This packaging system is able to perform intelligent functions to increase shelf life, increase safety and improve product quality.

OBJECTIVES

Recently, various types of packaging systems are available for meat products, especially cooked, fresh and processed meats. But because meat products are very perishable, monitoring their quality and safety in the supply chain is very important. This systematic article briefly reviews some of the recent data about the application of intelligent packaging in meat products.

METHODS

The search was conducted in Google Scholar, Science Direct, Elsevier, Springer, Scopus, and PubMed, from April 1996 to April 2021 using a different combination of the following keyword: intelligent packaging, and meat.

RESULTS

The results showed that the intelligent packaging presents several benefits compared to traditional packaging (e.g., antimicrobial, antioxidant, and shelf life extension) at the industrial processing level. Thus, these systems have been applied to improve the shelf life and textural properties of meat and meat products.

CONCLUSIONS

It is necessary to control the number of intelligent compounds that are included in the packaging as they clearly influence the quality and nutritional properties as well as the final cost of the food products.

QTRAP LC/MS/MS of Garlic Nanoparticles and Improving Sunflower Oil Stabilization during Accelerated Shelf Life Storage

The purpose of this research was to assess and utilize the bioactive compounds of garlic nanoparticles (Ga-NPs) as a natural antioxidant in sunflower oil (SFO) stored at 65 ± 1 °C for 24 days. The garlic nanoparticles (Ga-NPs) from the Balady cultivar were prepared, characterized, and added to SFO at three concentrations: 200, 600, and 1000 ppm (w/v), and they were compared with 600 ppm garlic lyophilized powder extract (Ga-LPE), 200 ppm BHT, 200 ppm α-tocopherol, and SFO without Ga-NPs (control). The QTRAP LC/MS/MS profile of Ga-NPs revealed the presence of four organosulfur compounds. Ga-NPs exhibited the highest capacity for phenolic, flavonoid, and antioxidant compounds. In Ga-NP SFO samples, the values of peroxide, p-anisidine, totox, conjugated dienes, and conjugated trienes were significantly lower than the control. The antioxidant indices of SFO samples containing Ga-NPs were higher than the control. The Ga-NPs enhanced the sensory acceptability of SFO treatments up to day 24 of storage. The shelf life of SFO treated with Ga-NPs was substantially increased (presuming a Q₁₀ amount). The results show that Ga-NPs are a powerful antioxidant that improves SFO stability and extends the shelf life (~384 days at 25 °C).

Novel pectin-based nanocomposite film for active food packaging applications

Novel pectin-based films reinforced with crystalline nanocellulose (CNC) and activated with zinc oxide nanoparticles (ZnO NPs) were prepared by solvent-casting method. Film ingredients enhanced UV-blocking, thermal, and antibacterial properties of active films against well-known foodborne pathogens. Optimal active films exhibited higher mechanical, water vapor barrier properties compared to pristine pectin films. SEM confirmed the even distribution of CNC and ZnO NPs in pectin matrix and their interactions were proven using FTIR. Wrapping hard cheese samples artificially contaminated with Staphylococcus aureus and Salmonella enterica with the ternary nanocomposite film at 7 °C for 5 days significantly reduced the total population counts by at least 1.02 log CFU/g. Zn²⁺ migrating to wrapped cheese samples was below the specific limit (5 mg/kg), confirming their safety for food contact. Overall, ZnO/CNC/pectin nanocomposite films represent promising candidates for active food packaging as safe, eco-friendly alternatives for synthetic packaging materials.

Salmonella Behavior in Meat during Cool Storage: A Systematic Review and Meta-Analysis

The aim of the present study was to investigate Salmonella behavior in meat stored in cool conditions (between 0 °C and 7.5 °C), by employing a systematic review and meta-analysis. The data were obtained from research articles published in SciELO, PubMed, the Web of Science, and Scopus databases. The results of the retrieved studies were obtained from meat (beef, chicken, pork, poultry, and turkey), fish, shellfish, and broth media samples The data were extracted as sample size (n), initial concentration (Xi), final concentration (Xf), standard deviation (SD), standard error (SE), and microbial behavior effects (reduction or growth). A meta-analysis was carried out using the metaphor package from R software. A total of 654 articles were initially retrieved. After applying the exclusion criteria, 83 articles were selected for the systematic review, and 61 of these were used for the meta-analysis. Most studies were conducted at 0 °C to 4.4 °C storage temperatures under normal atmosphere package conditions. Salmonella Typhimurium, S. Enteritidis, and a cocktail (strain mixture) were inoculated at 5.0 and 6.0 log CFU mL−1. Articles both with and without the addition of antimicrobial compounds were found. Salmonella concentration decreases were observed in most studies, estimated for all study combinations as −0.8429 ± 0.0931 log CFU g−1 (95% CI; −1.0254, −0.6604) (p < 0.001), varying for each subgroup analysis. According to this survey, Salmonella concentration decreases are frequent during cool storage, although concentration increases and no bacterial inactivation were observed in some studies.

Comparative physicochemical characteristics and in vitro protein digestibility of alginate/calcium salt restructured pork steak hydrolyzed with bromelain and addition of various hydrocolloids (low acyl gellan, low methoxy pectin and κ-carrageenan)

Physicochemical and in vitro protein digestibility of alginate/calcium (AC) restructured pork steak hydrolyzed with bromelain with addition of LA gellan, LM pectin and κ-carrageenan at various concentrations (0.5, 1.0, 1.5 and 2% w/w) was evaluated for masticatory dysfunction people. The AC samples with κ-carrageenan showed the lowest cooking losses and highest water holding capacity (WHC). Moreover, addition of κ-carrageenan showed the highest Kramer shear force (KSF) and higher hardness, cohesiveness, springiness, chewiness, and gumminess, but the adhesiveness value was lower than those of the other treatments. According to SEM, the gel network of AC samples with κ-carrageenan was more clearly than those with the other treatments. FTIR demonstrated that the addition of polysaccharides to AC sample enhanced the hydrogen bonds in the gel system. For in vitro protein digestibility results, addition of 0.5% (w/w) LA gellan and κ-carrageenan samples showed the highest pepsin (73-74%) and trypsin (79-80%) digestibility.

Effects of Faba Bean Hull Nanoparticles on Physical Properties, Protein and Lipid Oxidation, Colour Degradation, and Microbiological Stability of Burgers under Refrigerated Storage

The processing of faba beans generates great quantities of hulls, which are high in bioactive compounds with demonstrated radical-inhibiting properties. There is no research on the impact of using faba bean hull nanoparticles (FBH-NPs) to improve the quality and extend the shelf-life of beef products. Hence, the target of this investigation was to assess the inhibiting influence of adding FBH-NPs at two different concentrations (1 and 1.5%) on the physical attributes, lipid and protein oxidation, colour degradation, and microbiological safety of burgers during refrigerated storage (4 ± 1 °C/12 days). The FBH-NPs presented great phenolic content (103.14 ± 0.98 mg GAE/g dw) and antioxidant potential. The water holding capacity and cooking properties in burgers including FBH-NPs were improved during storage. The FBH-NPs significantly (p < 0.05) decreased the reduction rate of redness and lightness during the burger refrigerated storage and the FBH-NPs were more beneficial in preventing cold burger discolouration. In the FBH-NPs-treated burgers, peroxide values, TBARS, and protein carbonyl content were lower than in the control (up to 12 days). The microbiological load of burgers including FBH-NPs was lower than the load of the control during refrigerated storage. The findings revealed that FBH-NPs were more efficient in enhancing the cooking characteristics, retarding lipid or protein oxidation, preventing colour detrition and improving the microbial safety of burgers.

Protective Impact of Chitosan Film Loaded Oregano and Thyme Essential Oil on the Microbial Profile and Quality Attributes of Beef Meat

Edible films and essential oil (EO) systems have the potency to enhance the microbial quality and shelf life of food. This investigation aimed to evaluate the efficacy of chitosan films including essential oils against spoilage bacteria and foodborne pathogens associated with meat. Antimicrobial activity (in vitro and in vivo) of chitosan films (CH) incorporated with oregano oil (OO) and thyme oil (TO) at 0.5 and 1% was done against spoilage bacteria and foodborne pathogens, compared to the control sample and CH alone. Preliminary experiments (in vitro) showed that the 1% OO and TO were more active against Staphylococcus aureus compared to Escherichia coli O157:H7 and Salmonella Typhimurium. In in vivo studies, CH containing OO and TO effectively inhibited the three foodborne pathogens and spoilage bacteria linked with packed beef meat which was kept at 4 °C/30 days compared to the control. The total phenolic content of the EOs was 201.52 mg GAE L⁻¹ in thyme and 187.64 mg GAE L⁻¹ in oregano. The antioxidant activity of thyme oil was higher than oregano oil. The results demonstrated that the shelf life of meat including CH with EOs was prolonged ~10 days compared to CH alone. Additionally, CH-OO and CH-TO have improved the sensory acceptability until 25 days, compared to the control. Results revealed that edible films made of chitosan and containing EOs improved the quality parameters and safety attributes of refrigerated or fresh meat.

Applications of Inorganic Nanoparticles in Food Packaging: A Comprehensive Review

Nanoparticles (NPs) have acquired significance in technological breakthroughs due to their unique properties, such as size, shape, chemical composition, physiochemical stability, crystal structure, and larger surface area. There is a huge demand for packaging materials that can keep food fresher for extended periods of time. The incorporation of nanoscale fillers in the polymer matrix would assists in the alleviation of packaging material challenges while also improving functional qualities. Increased barrier properties, thermal properties like melting point and glass transition temperatures, and changed functionalities like surface wettability and hydrophobicity are all features of these polymers containing nanocomposites. Inorganic nanoparticles also have the potential to reduce the growth of bacteria within the packaging. By incorporating nano-sized components into biopolymer-based packaging materials, waste material generated during the packaging process may be reduced. The different inorganic nanoparticles such as titanium oxide, zinc oxide, copper oxide, silver, and gold are the most preferred inorganic nanoparticles used in food packaging. Food systems can benefit from using these packaging materials and improve physicochemical and functional properties. The compatibility of inorganic nanoparticles and their various forms with different polymers make them excellent components for package fortification. This review article describes the various aspects of developing and applying inorganic nanoparticles in food packaging. This study provides diverse uses of metals and metal oxides nanoparticles in food packaging films for the development of improved packaging films that can extend the shelf life of food products. These packaging solutions containing nanoparticles would effectively preserve, protect, and maintain the quality of the food material.

Applications of Microbial Exopolysaccharides in the Food Industry

Exopolysaccharides (EPSs) are high molecular weight polysaccharides secreted by microorganisms in the surrounding environment. In addition to the favorable benefits of these compounds for microorganisms, including microbial cell protection, they are used in various food, pharmaceutical, and cosmetic industries. Investigating the functional and health-promoting characteristics of microbial EPS, identifying the isolation method of these valuable compounds, and their applications in the food industry are the objectives of this study. EPS are used in food industries as thickeners, gelling agents, viscosifiers, and film formers. The antioxidative, anticancer, prebiotic, and cholesterol-lowering effects of some of these compounds make it possible to use them in functional food production.

Emerging Trends in Pullulan-Based Antimicrobial Systems for Various Applications

Global reports on multidrug resistance (MDR) and life-threatening pathogens such as SARS-CoV-2 and Candida cruris have stimulated researchers to explore new antimicrobials that are eco-friendly and economically viable. In this context, biodegradable polymers such as nisin, chitin, and pullulan play an important role in solving the problem. Pullulan is an important edible, biocompatible, water-soluble polymer secreted by Aureobasidium pullulans that occurs ubiquitously. It consists of maltotriose units linked with α-1,6 glycosidic bonds and is classed as Generally Regarded as Safe (GRAS) by the Food and Drug Administration (FDA) in the USA. Pullulan is known for its antibacterial, antifungal, antiviral, and antitumor activities when incorporated with other additives such as antibiotics, drugs, nanoparticles, and so on. Considering the importance of its antimicrobial activities, this polymer can be used as a potential antimicrobial agent against various pathogenic microorganisms including the multidrug-resistant (MDR) pathogens. Moreover, pullulan has ability to synthesize biogenic silver nanoparticles (AgNPs), which are remarkably efficacious against pathogenic microbes. The pullulan-based nanocomposites can be applied for wound healing, food packaging, and also enhancing the shelf-life of fruits and vegetables. In this review, we have discussed biosynthesis of pullulan and its role as antibacterial, antiviral, and antifungal agent. Pullulan-based films impregnated with different antimicrobials such as AgNPs, chitosan, essential oils, and so on, forming nanocomposites have also been discussed as natural alternatives to combat the problems posed by pathogens.

Nanomaterials in the Management of Gram-Negative Bacterial Infections

The exploration of multiplexed bacterial virulence factors is a major problem in the early stages of Escherichia coli infection therapy. Traditional methods for detecting Escherichia coli (E. coli), such as serological experiments, immunoassays, polymerase chain reaction, and isothermal microcalorimetry have some drawbacks. As a result, detecting E. coli in a timely, cost-effective, and sensitive manner is critical for various areas of human safety and health. Intelligent devices based on nanotechnology are paving the way for fast and early detection of E. coli at the point of care. Due to their specific optical, magnetic, and electrical capabilities, nanostructures can play an important role in bacterial sensors. Another one of the applications involved use of nanomaterials in fighting microbial infections, including E. coli mediated infections. Various types of nanomaterials, either used directly as an antibacterial agent such as metallic nanoparticles (NPs) (silver, gold, zinc, etc.), or as a nanocarrier to deliver and target the antibiotic to the E. coli and its infected area. Among different types, polymeric NPs, lipidic nanocarriers, metallic nanocarriers, nanomicelles, nanoemulsion/ nanosuspension, dendrimers, graphene, etc. proved to be effective vehicles to deliver the drug in a controlled fashion at the targeted site with lower off-site drug leakage and side effects.

Pullulan or chitosan based active coating by incorporating polyphenols from lemon peel in raw poultry meat

Dip coating with pullulan and chitosan in combination with lemon peel polyphenols (LPP) was attempted for shelf life extension of raw poultry meat. Control samples demonstrated bacterial lag phase and shelf life of 1.3 and 1 day, respectively at 4 °C. Meat samples coated with pullulan or chitosan in combination with 1% LPP led to an increased bacterial lag phase; thereby extending the shelf life of meat by 6 and 14 days, respectively. Significant (p < 0.05) reduction in lipid peroxidation in comparison with control was also observed due to dip treatment. Treated samples maintained values of < 1 mg kg^-1 malondialdehyde for thiobarbituric acid reactive substances during the entire storage period. No significant (p > 0.05) change in colour, weight loss and pH of treated samples during storage was noted. Dip coated samples maintained acceptable sensory quality during the entire storage period. This study indicates that use of LPP for shelf life extension of raw meat could be a practical proposition.

Pullulan films loading saffron extract encapsulated in nanoliposomes; preparation and characterization

Nanoencapsulation of saffron extract (SE) components into the rapeseed lecithin nanoliposomes were performed by sonication of their aqueous dispersions as a green process. Dynamic light scattering (DLS) results exhibited that empty and SE loaded nanoliposomes (SENL) had average sizes in range of 118-138 nm, negative zeta potentials (-32.0 to -46.8 mV) and polydispersity index (PDI) less than 0.3 during storage for 28 days at 4 °C. Encapsulation efficiency of crocin was approximately 30%. The 70% of crocin released from SENLs within 5 h in PBS solution. Pullulan-based films were fabricated by incorporation of empty and SE loaded nanoliposomes into pullulan solution through casting method. The mechanical resistance and thermal stability of the films reduced by addition of nanoliposomes. FTIR and thermal characterizations indicated that SE was successfully encapsulated in the nanoliposomes and film matrix with high thermal stability. Incorporation of nanoliposomes enhanced the oxygen barrier properties of the films, while it didn't significantly affect the water vapor permeability (WVP) of the films. The obtained edible films or coatings can provide additional benefits due to unique flavor and color of saffron. In addition, the utilization of SE, can provide benefits for health-allegation from SE antioxidant capacity.

Antimicrobial Effect of Chitosan Films on Food Spoilage Bacteria

Synthetic materials commonly used in the packaging industry generate a considerable amount of waste each year. Chitosan is a promising feedstock for the production of functional biomaterials. From a biological point of view, chitosan is very attractive for food packaging. The purposes of this study were to evaluate the antibacterial activity of a set of chitosan-metal oxide films and different chitosan-modified graphene (oxide) films against two foodborne pathogens: Campylobacter jejuni ATCC 33560 and Listeria monocytogenes 19115. Moreover, we wanted to check whether the incorporation of antimicrobial constituents such as TiO2, ZnO, Fe2O3, Ag, and graphene oxide (GO) into the polymer matrices can improve the antibacterial properties of these nanocomposite films. Finally, this research helps elucidate the interactions of these materials with eukaryotic cells. All chitosan-metal oxide films and chitosan-modified graphene (oxide) films displayed improved antibacterial (C. jejuni ATCC 33560 and L. monocytogenes 19115) properties compared to native chitosan films. The CS-ZnO films had excellent antibacterial activity towards L. monocytogenes (90% growth inhibition). Moreover, graphene-based chitosan films caused high inhibition of both tested strains. Chitosan films with graphene (GO, GOP, GOP-HMDS, rGO, GO-HMDS, rGOP), titanium dioxide (CS-TiO2 20:1a, CS-TiO2 20:1b, CS-TiO2 2:1, CS-TiO2 1:1a, CS-TiO2 1:1b) and zinc oxide (CS-ZnO 20:1a, CS-ZnO 20:1b) may be considered as a safe, non-cytotoxic packaging materials in the future.

The Effect of Ag Nanoparticles and Multimicrobial Preparation as Factors Stabilizing the Microbiological Homeostasis of Feed Tables for Cornu aspersum (Müller) Snails on Snail Growth and Quality Parameters of Carcasses and Shells

Simple Summary

The farming of snails, unlike that of large farm animals, requires less space and financial resources, and snails are not as demanding. In field husbandry conditions, snails have access to green forage and are given concentrated mixtures on feed tables. In this maintenance system, it is important to carry out treatments stabilizing the microbiological balance of feed tables, where snail feces and feed refusals accumulate. This study analyzed the effect of paint with silver nanoparticles (nano-Ag) or a multimicrobial preparation applied to feed tables on the microbiological composition of the feed table environment, the growth and mortality of snails, and parameters assessing the quality of carcasses and snail shells. Results showed that the use of nano-Ag paint reduced the growth of bacteria, while the multimicrobial preparation reduced mold and yeast. Spraying feed tables with the multimicrobial preparation had a better effect on the growth of snails, while the use of nano-Ag paint reduced the mortality of the animals. The factors used did not have a negative effect on the quality of shells. The snails that had contact with nano-Ag paint showed a higher content of Ag in the carcasses and a greater degree of lipid peroxidation.

Abstract

The aim of this research was to evaluate the effect of Ag nanoparticles (nano-Ag) used in the paint covering feed tables or a multimicrobial preparation applied to feed tables on the microbiological composition of the feed table environment, the growth and mortality of snails, and selected parameters for assessing the quality of carcasses and snail shells. The research was carried out in a farm of Cornu aspersum (Müller) snails. In the control (K) group, paint without nano-Ag was used. In two other groups (N-Ag and N-Ag + effective microorganisms (EM)), the feed tables were covered with the same paint as in the control group but with the addition of 100 mg/L of nano-Ag it (N-Ag group). Additionally, multimicrobial preparation (EM Bokashi^®) at a concentration of 10% was spread on the tables in the N-Ag + EM group. In the last group (EM), the feed tables were covered with paint without nano-Ag, and only multimicrobial preparation was applied at a concentration of 10%. During the tests, the body weight of snails was measured three times, and swab samples were taken from the feed tables for the examination of microbiological composition. At the end of the experiment, the snails were killed, and the weight of the carcass and the size of the shell were measured. The content of Ag and the degree of lipid oxidation (thiobarbituric acid reactive substances (TBARS)) in the carcasses were analyzed, and the content of Ca and the crushing strength of the shells were determined. In the N-Ag and N-Ag + EM groups, a significant reduction in the total number of bacteria, fecal streptococci, and Escherichia coli was found, while there was also a reduction in mold and fungi in the N-Ag + EM and EM groups. In the K and EM groups, the mortality of animals was higher than in the nano-Ag groups. In subsequent weight checks, the highest body weight was found in the EM group and the lowest in the N-Ag and N-Ag + EM groups. In addition, the carcass weight and shell size in the N-Ag group was significantly lower compared to the K and EM groups. In the N-Ag and N-Ag + EM groups, a higher Ag content in the carcasses and a greater degree of lipid peroxidation were found. The Ca content of the shells was the highest in the N-Ag group, and the hardness of shells was the highest in the N-Ag and N-Ag + EM groups.

Reducing Meat Perishability through Pullulan Active Packaging

The provision of safe products from the meat industry has been considered as the major source of protein for maintaining human health. Meat-borne outbreaks are mainly due to Salmonella typhimurium (S. typhimurium), Staphylococcus aureus (S. aureus), Escherichia coli (E. coli), and Clostridium perfringens (C. perfringens), reducing the shelf life and consumer demands. A variety of vulnerable substances, including cholesterol oxidation products (COPs), are generated by the oxidation of meat induced by the microbial infestations. The use of certain biodegradable active packaging, including pullulan active packaging, is being focused by the meat industry due to their safety, stability, and negligible health risks. The potential of pullulan active packaging, incorporated with silver nanoparticles and essential oils, against E. coli, S. typhimurium, Mycoplasma, and other bacterial species is exclusive. Similarly, maintenance of organoleptic properties of meat with nominal oxidative rancidity and limited human health issues can be acquired by pullulan active packaging.

Pullulan Films Containing Rockrose Essential Oil for Potential Food Packaging Applications

Active packaging is designed to control the development of decay- and disease-causing microorganisms and is emerging as a promising technology for extending shelf-life, maintaining food safety, reducing waste, and minimizing the risks for foodborne diseases. The goal of this work was to develop and characterize bioactive pullulan-based films, containing rockrose (Cistus ladanifer) essential oil. Among other abundant compounds (camphene, bornyl acetate and trans-pinocarveol), α-pinene was identified as the major compound of rockrose essential oil (39.25%). The essential oil presented stronger antibacterial activity against Gram-positive than against Gram-negative bacteria. The antioxidant results indicate the potential of the developed films to be used to package foods susceptible to oxidation and rancification, thus improving their shelf-life. Also, this study reflects the potential of rockrose essential oil, free or incorporated in pullulan, as a promising quorum sensing inhibitor, since it was able to interrupt intercellular communication, inhibiting violacein production. Electronic microscopy images showed the antibiofilm activity of the films with rockrose essential oil that were able to influence bacterial adhesion, which may be explained by the differences in the surface free energy of the films, as also determined.

Design and Characterization of Bioactive Bilayer Films: Release Kinetics of Isopropyl Palmitate

Active packaging incorporating antioxidants and antimicrobials is creating a niche in the market and becoming increasingly important. The main goal of this work was the design of bioactive bilayer films (zein/pullulan) incorporating licorice essential oil. The bilayer films were fully characterized in terms of their chemical, physical, barrier, antioxidant, and antimicrobial properties. Furthermore, the release kinetics of isopropyl palmitate, the major compound of the licorice essential oil, was evaluated by HPLC-DAD (high-performance liquid chromatography coupled to diode-array detector). Scanning Electron Microscopy (SEM) micrographs of cross-sections of the bilayer films clearly show the two layers of the films. Besides presenting the capacity to scavenge free radicals and to inhibit the lipid peroxidation, the developed bilayer films were also able to inhibit the growth of known foodborne pathogens (Enterococcus faecalis and Listeria monocytogenes). The release kinetics profile of isopropyl palmitate from bilayer films incorporating licorice essential oil demonstrated that in 50% ethanol at room temperature, the release was more effective, suggesting that the bilayer films will be more efficient if applied to package semi-fatty food.

Prolonging the Shelf Life of Cherry Tomatoes by Pullulan Coating with Ethanol Extract of Propolis During Refrigerated Storage

Cherry tomatoes are one of the most popular tomato varieties known for their bioactive compounds and sensory properties. One way to reduce the contamination of tomato is to coat them with natural or antimicrobial substances. In this study, an ethanolic extract of propolis (EEP) was obtained, and its chemical composition was analyzed using high-performance liquid chromatography with diode array detector (HPLC-DAD), and minimum inhibitory concentration (MIC) and the minimum bactericidal/fungicidal concentration (MBC/MFC) were determined using the serial microdilution method. The antimicrobial activity of 5 and 10% EEP and pullulan films containing EEP (5 and 10%) against Listeria monocytogenes, Salmonella Typhimurium, Escherichia coli O157, Penicillium chrysogenum, Fusarium solani, and Botrytis cinerea were compared. The influence of a pullulan coating containing EEP (5 and 10%) on reducing the number of bacteria and molds, physicochemical properties (weight loss (WL), total soluble solids (TSS), titratable acidity (TA), maturity index, pH, and color), and sensory properties (color and brightness of skin, aroma, flavor, overall quality, and general preference) of cherry tomatoes during refrigerated storage was evaluated. Pullulan films with EEP inhibited the growth of microorganisms on cherry tomatoes. These coatings did not affect the TSS and pH values of tomatoes, but a slight decrease in TA and WL was observed. Cherry tomatoes coated with pullulan coatings containing EEP did not show any adverse changes in their sensory properties. It was found that the addition of EEP to the pullulan coatings enriched them with antimicrobial properties and enhanced their action while reducing the WL and maturation time of cherry tomatoes.

Effectiveness of bacterial cellulose in controlling purge accumulation and improving physicochemical, microbiological, and sensorial properties of vacuum-packaged beef

The application of bacterial cellulose (BC) as a wrapping material for vacuum-packaged beef was studied and compared against unwrapped beef for up to 3 weeks. The impact of BC wrap on the weight loss, purge accumulation, and drip loss were assessed along with low-field nuclear magnetic resonance, physicochemical, microbiological, and sensorial evaluations. The BC wrap significantly (P < 0.05) reduced purge accumulation in vacuum packages which was confirmed by an increased swelling ratio and scanning electron microscopy images. Colorimetric measurements showed significantly (P < 0.05) increased redness and yellowness values in wrapped samples compared to unwrapped samples. BC wrap did not affect pH, tenderness, and odor of meat, but significantly (P < 0.05) increased lipid oxidation, and numbers of lactic acid bacteria and Brochothrix thermosphacta counts. This study shows that BC wrap has potential as a purge absorbent in vacuum packaged meat. PRACTICAL APPLICATION: Bacteria cellulose has good water holding capacity that can be utilized to absorb purge exudate from beef. It helps to improve the appearance and consequently consumer acceptance of vacuum packed beef.

Essential oil impregnated luminescent hydroxyapatite: Antibacterial and cytotoxicity studies

In this study, porous fluorescent nanocrystalline erbium doped hydroxyapatite (eHAp) was synthesized via hydrothermal assisted co-precipitation method. Eucalyptus oil (EU), frankincense oil (FO), Tea tree oil (TTO), wintergreen oil (WO) were successfully absorbed into eHAp pellet by vacuum filtration technique using Buckner funnel. Phase crystallization, fluorescence property and microstructure of eHAp were confirmed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Photoluminiscence spectroscopy (PL) and Field emission scanning electron microscopy (FESEM). Strong antimicrobial activity was observed for EU, TTO and WO on both E. coli and S. aureus mediated by cell membrane damage and leakage of cytoplasmic components. The oil absorbed eHAp nanocomposites were found to be moderately biocompatible with normal WI-38 cells up to MIC concentration various time scale. The nanocomposites showed significant cytotoxic activity on breast cancer cell line MDA-MB 468 and the fluorescent property of the eHAp was utilized to visualize internalization of particles in the cells. The release profile of the oils from the eHAp matrix showed pH dependent release indicated that the porous matrix can be used as a suitable carrier for modulated and sustained release of bioactive components. Thus, given the multifunctional attributes these natural essential oil-based nanocomposites show great promise as an alternative to conventional therapeutic treatments.

Developing Nano-Delivery Systems for Agriculture and Food Applications with Nature-Derived Polymers

The applications of nanotechnology are wide ranging, and developing functional nanomaterials for agri-food applications from nature-derived polymers is widely conceived as a sustainable approach that is safer for human and animal consumption. In light of this, this review focuses on the advances in the development of nano-delivery systems using nature-derived polymers for agri-food applications. The review opens with a section detailing the different types of nature-derived polymers currently being used in various applications in the agri-food industry with a special mention on microbial extracellular polymeric materials. The major applications of nano-delivery systems in the food sector, such as food fortification and food preservation, as well as in the agricultural sector for controlled release of agrochemicals using nature-derived polymers are discussed. The review ends with a perspective on the safety and public perception of nano-enabled foods with a concluding remark on future directions of incorporating nano-delivery systems for agri-food purposes.

Controlled Release of Thymol from Poly(Lactic Acid)-Based Silver Nanocomposite Films with Antibacterial and Antioxidant Activity

Thymol and silver nanoparticles (Ag-NPs) were used to develop poly(lactic acid) (PLA)-based films with antioxidant and antibacterial performance. Different amounts of thymol (6 and 8 wt%) and 1 wt% Ag-NPs were added to PLA to produce the active films. Ag-NPs and thymol were successfully identified in the nanocomposite structures using spectroscopic techniques. A kinetic study was performed to evaluate the release of thymol and Ag-NPs from the nanocomposites to an aqueous food simulant (ethanol 10%, v/v) at 40 °C. The diffusion of thymol from the polymer matrix was affected by the presence of non-migrating Ag-NPs, which showed non-Fickian release behavior. The ternary system including 1 wt% Ag-NPs and 8 wt% thymol showed clear antibacterial performance by reducing the cell viability of Escherichia coli and Staphylococcus aureus by around 40% after 3 and 24 h of storage at 4, 25, and 37 °C compared to neat PLA. Significant antioxidant behavior of all active films was also confirmed using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) method. The obtained nanocomposite films based on PLA and the addition of Ag-NPs and thymol were proven to have combined antioxidant and antibacterial performance, with controlled release of thymol. These formulations have potential applications in the development of innovative and customized active packaging systems to increase the shelf-life of food products.

Principles and applications of non-thermal technologies and alternative chemical compounds in meat and fish

Conventional methods of food preservation have demonstrated several disadvantages and limitations in the efficiency of the microbial load reduction and maintain food quality. Hence, non-thermal preservation technologies (NTPT) and alternative chemical compounds (ACC) have been considered a high promissory replacer to decontamination, increasing the shelf life and promoting low levels of physicochemical, nutritional and sensorial alterations of meat and fish products. The combination of these methods can be a potential alternative to the food industry. This review deals with the most critical aspects of the mechanisms of action under microbial, physicochemical, nutritional and sensorial parameters and the efficiency of the different NTPT (ultrasound, high pressure processing, gamma irradiation and UV-C radiation) and ACC (peracetic acid, bacteriocins, nanoparticles and essential oils) applied in meat and fish products. The NTPT and ACC present a high capacity of microorganisms inactivation, ensuring low alterations level in the matrix and high reduction of environmental impact. However, the application conditions of the different methods as exposition time, energy intensity and concentration thresholds of chemical compounds need to be specifically established and continuously improved for each matrix type to reduce to the maximum the physicochemical, nutritional and sensorial changes. In addition, the combination of the methods (hurdle concept) may be an alternative to enhance the matrix decontamination. In this way, undesirable changes in meat and fish products can be further reduced without a decrease in the efficiency of the decontamination.

Eco-friendly active packaging consisting of nanostructured biopolymer matrix reinforced with TiO2 and essential oil: Application for preservation of refrigerated meat

Biodegradable active packaging is required to replace petroleum-based plastics. In this study, a biopolymer-based packaging material was prepared using a casting method, which consisted of a cellulose nanofiber/whey protein matrix containing titanium dioxide particles (1% TiO₂) and essential oil droplets (2% rosemary oil) as functional components. The ability of this packaging to protect lamb meat from chemical and microbial spoilage during 15 days of refrigerated storage (4 °C) was analysed. The meat samples were periodically analysed for microbial count, chemical stability (pH, lipid oxidation, lipolysis), and optical properties. The active packaging significantly reduced microbial growth, lipid oxidation, and lipolysis of the lamb meat during storage, which led to an increase in shelf life from around 6 to 15 days. These biopolymer-based active packaging materials may therefore be suitable for application in meat products.

Essential Oils and Mono/bi/tri-Metallic Nanocomposites as Alternative Sources of Antimicrobial Agents to Combat Multidrug-Resistant Pathogenic Microorganisms: An Overview

Over the past few decades, many pathogenic bacteria have become resistant to existing antibiotics, which has become a threat to infectious disease control worldwide. Hence, there has been an extensive search for new, efficient, and alternative sources of antimicrobial agents to combat multidrug-resistant pathogenic microorganisms. Numerous studies have reported the potential of both essential oils and metal/metal oxide nanocomposites with broad spectra of bioactivities including antioxidant, anticancer, and antimicrobial attributes. However, only monometallic nanoparticles combined with essential oils have been reported on so far with limited data. Bi- and tri-metallic nanoparticles have attracted immense attention because of their diverse sizes, shapes, high surface-to-volume ratios, activities, physical and chemical stability, and greater degree of selectivity. Combination therapy is currently blooming and represents a potential area that requires greater attention and is worthy of future investigations. This review summarizes the synergistic effects of essential oils with other antimicrobial combinations such as mono-, bi-, and tri-metallic nanocomposites. Thus, the various aspects of this comprehensive review may prove useful in the development of new and alternative therapeutics against antibiotic resistant pathogens in the future.

Nanotechnologies in Food Science: Applications, Recent Trends, and Future Perspectives

Nanotechnology is a key advanced technology enabling contribution, development, and sustainable impact on food, medicine, and agriculture sectors. Nanomaterials have potential to lead qualitative and quantitative production of healthier, safer, and high-quality functional foods which are perishable or semi-perishable in nature. Nanotechnologies are superior than conventional food processing technologies with increased shelf life of food products, preventing contamination, and production of enhanced food quality. This comprehensive review on nanotechnologies for functional food development describes the current trends and future perspectives of advanced nanomaterials in food sector considering processing, packaging, security, and storage. Applications of nanotechnologies enhance the food bioavailability, taste, texture, and consistency, achieved through modification of particle size, possible cluster formation, and surface charge of food nanomaterials. In addition, the nanodelivery-mediated nutraceuticals, synergistic action of nanomaterials in food protection, and the application of nanosensors in smart food packaging for monitoring the quality of the stored foods and the common methods employed for assessing the impact of nanomaterials in biological systems are also discussed.

Biopolymers-Based Materials Containing Silver Nanoparticles as Active Packaging for Food Applications-A Review

Packaging is an integral part of food products, allowing the preservation of their quality. It plays an important role, protecting the packed product from external conditions, maintaining food quality, and improving properties of the packaged food during storage. Nevertheless, commonly used packaging based on synthetic non-biodegradable polymers causes serious environmental pollution. Consequently, numerous recent studies have focused on the development of biodegradable packaging materials based on biopolymers. In addition, biopolymers may be classified as active packaging materials, since they have the ability to carry different active substances. This review presents the latest updates on the use of silver nanoparticles in packaging materials based on biopolymers. Silver nanoparticles have become an interesting component of biodegradable biopolymers, mainly due to their antimicrobial properties that allow the development of active food packaging materials to prolong the shelf life of food products. Furthermore, incorporation of silver nanoparticles into biopolymers may lead to the development of materials with improved physical-mechanical properties.

Development and evaluation of pullulan-based composite antimicrobial films (CAF) incorporated with nisin, thymol and lauric arginate to reduce foodborne pathogens associated with muscle foods

A novel composite antimicrobial film (CAF), made from a pullulan-based biopolymer and polyethylene (PE) was developed and evaluated for controlling pathogens associated with muscle foods. Initially, CAFs were developed by incorporating thymol (T), nisin (N) and/or lauric arginate (LAE) into the pullulan layer and layering it on top of PE. The antimicrobial activity of the resulting CAFs was evaluated against cocktails of Shiga toxin-producing E. coli (STEC), Salmonella spp., Listeria monocytogenes (L. monocytogenes) and Staphylococcus aureus (S. aureus) in disk diffusion assays (DDAs). CAFs containing N were ineffective, while those containing T were effective for inhibiting the pathogens in DDAs. However, CAFs made with them did not exhibit desirable physical and mechanical properties since solvents (HCl and ethanol, respectively) interfered with the binding of pullulan to PE. Conversely, CAFs made with 0.5, 1 and 2.5% LAE maintained proper physical and mechanical characteristics and inhibited the four bacterial pathogens in DDAs. Based on these preliminary results, cocktails consisting of approximately 8 log₁₀ CFU/ml of STEC, Salmonella, L. monocytogenes, or S. aureus were experimentally-inoculated onto raw beef, raw chicken breast, or ready-to-eat (RTE) turkey breast to obtain approximately 6.6 log₁₀ CFU/cm², aseptically transferred to CAFs containing 0.5, 1, or 2.5% LAE that were made into sachets/bags, vacuum packaged, sealed, and remaining microbial populations determined up to 28 days of refrigerated storage (4 °C). By day 28, CAFs containing 0.5, 1, and 2.5% LAE reduced: STEC by 1.13, 1.33 and 2.88 log₁₀ CFU/cm² respectively, on raw beef; Salmonella by 2.03, 2.12 and 3.01 log₁₀ CFU/cm² respectively, on raw chicken breast; L. monocytogenes by 1.12, 1.81 and 3.56 log₁₀ CFU/cm² respectively, on RTE turkey breast; and S. aureus by 0.68, 2.02 and 3.43 log₁₀ CFU/cm², respectively, on RTE turkey breast. CAFs may be of interest to the meat and poultry industry to control foodborne pathogens associated with these food products.

Cheese whey as potential resource for antimicrobial edible film and active packaging production

Many cheese manufacturers still have not utilized cheese whey that damages to the environment as it is directly been drained into waters. Cheese whey can be used as active packaging material to prolong the shelf-life of food products. Fermented cheese whey contains bioactive peptides which are able to improve the functional properties of cheese whey as an antimicrobial agent. The combination of cheese whey with polysaccharides, lipid, and other additional ingredients can improve the physical characteristics of the active packaging in the form of edible film. Around 20-45% of plasticizer will expose the film formed. Cheese whey with agro-industrial waste starch-based formulation can be used as an alternative way to produce an antimicrobial edible film as an active packaging. The film has shown acceptable physical characteristics and high antimicrobial activity, which makes it possible to extend the shelf life of food products. An advanced process, for example, the use of transglutaminase enzyme and Candida tropicalis mutant, is also effective. The result of that is the formation of the essential compound which can improve the active packaging quality. The utilisation of cheese whey and agro-industrial waste based on starch contributes significantly to the environmental conservation.

Cheese whey as potential resource for antimicrobial edible film and active packaging production

Many cheese manufacturers still have not utilized cheese whey that damages to the environment as it is directly been drained into waters. Cheese whey can be used as active packaging material to prolong the shelf-life of food products. Fermented cheese whey contains bioactive peptides which are able to improve the functional properties of cheese whey as an antimicrobial agent. The combination of cheese whey with polysaccharides, lipid, and other additional ingredients can improve the physical characteristics of the active packaging in the form of edible film. Around 20-45% of plasticizer will expose the film formed. Cheese whey with agro-industrial waste starch-based formulation can be used as an alternative way to produce an antimicrobial edible film as an active packaging. The film has shown acceptable physical characteristics and high antimicrobial activity, which makes it possible to extend the shelf life of food products. An advanced process, for example, the use of transglutaminase enzyme and Candida tropicalis mutant, is also effective. The result of that is the formation of the essential compound which can improve the active packaging quality. The utilisation of cheese whey and agro-industrial waste based on starch contributes significantly to the environmental conservation.