Cyclodextrin-Based Formulations: A Non-Invasive Platform for Targeted Drug Delivery

Trans-nasal brain delivery of anti-TB drugs by methyl-β-cyclodextrin microparticles show efficient mycobacterial clearance from central nervous system

Central nervous system tuberculosis (CNS-TB) is the most severe extra-pulmonary manifestation of tuberculosis (TB), facing significant challenges due to the limited penetration of anti-TB drugs (ATDs) across the blood-brain barrier (BBB) and their insufficient concentrations at the site of infection. This study aimed to enhance the efficacy of ATDs by encapsulating them in methyl-β-cyclodextrin (M-β-CD) microparticles (ATD-MP) using spray drying, intended for intranasal delivery to manage CNS-TB. M-β-CD microparticles loaded with isoniazid (INH) and rifampicin (RIF) exhibited spherical shapes with slightly deflated surfaces and particle sizes of 6.24 ± 0.77 μm and 5.97 ± 0.50 μm, respectively. M-β-CD improved the permeation of ATDs through RPMI-2650 cell monolayers while reducing drug cytotoxicity. Pharmacokinetic and biodistribution analysis demonstrated that intranasal administration of ATD-MP significantly enhanced the trans-nasal brain delivery of ATDs and their distribution in the brain, achieving the minimum inhibitory concentration. In a murine model of CNS-TB, intranasal insufflation of ATD-MP for four weeks led to a significant reduction (∼0.78 Log10 CFU) in mycobacterial burden in the brain compared to the untreated group (∼3.60 Log10 CFU). These preclinical results underscore the potential of intranasal administration of M-β-CD microparticles as an effective therapeutic strategy for combating brain inflammation in CNS-TB.

The application of cyclodextrins in drug solubilization and stabilization of nanoparticles for drug delivery and biomedical applications

Nanoparticles (NPs) have gained significant attention in recent years due to their potential applications in pharmaceutical formulations, drug delivery systems, and various biomedical fields. The versatility of colloidal NPs, including their ability to be tailored with various components and synthesis methods, enables drug delivery systems to achieve controlled release patterns, improved solubility, and increased bioavailability. The review discusses various types of NPs, such as nanocrystals, lipid-based NPs, and inorganic NPs (i.e., gold, silver, magnetic NPs), each offering unique advantages for drug delivery. Despite the promising potential of NPs, challenges such as physical instability and the need for surface stabilization remain. Strategies to overcome these challenges include the use of surfactants, polymers, and cyclodextrins (CDs). This review highlights the role of CDs in stabilizing colloidal NPs and enhancing drug solubility. The combination of CDs with NPs presents a synergistic approach that enhances drug delivery and broadens the range of biomedical applications. Additionally, the potential of CDs to enhance the stability and therapeutic efficacy of colloidal NPs, making them promising candidates for advanced drug delivery systems, is comprehensively reviewed.

Randomly methylated β-cyclodextrin improves water - solubility, cellular protection and mucosa permeability of idebenone

Neurodegenerative diseases such as Alzheimer's are very common today. Idebenone (IDE) is a potent antioxidant with good potential for restoring cerebral efficiency in cases of these and other medical conditions, but a serious drawback for the clinical use of IDE in neurological disorders lies in its scarce water solubility, which greatly inhibits its bioavailability. In this work, we prepared the inclusion complex of IDE with randomly methylated β-cyclodextrin (RAMEB), resulting in improved water solubility of the included drug; then its in vitro biological activity and ex vivo permeability was evalutated. The solid complex was characterized through FT-IR spectroscopy, Thermogravimetric analysis (TGA) and Differential Scanning Calorimetry (DSC). A 78-fold improvement of the solubility of IDE in water resulted, together with a strong 1:1 host-guest interaction (association constant of 12630 M-1), and dissolution of the complex within 15 min, all evidenced during the in-solution studies. Biological in vitro studies were then performed on differentiated human neuroblastoma cells (SH-SY5Y) subjected to oxidative stress. Pretreatment with IDE/RAMEB positively affected cell viability, promoted the nuclear translocation of Nrf2, and increased the levels of GSH as well as those of the endogenous antioxidant enzymes Mn-SOD and HO-1. Lastly, the complexation significantly improved the permeation of IDE through isolated rat nasal mucosa.

Exploring the interaction of curcumin with β-cyclodextrin and its binding with DNA: A combined spectroscopic and molecular docking study

At present, a major effort in biophysical studies has been paid towards exploring the interactions and release of therapeutic payloads to the specific site leaving behind healthy cells unaffected and hence, lower the drug-induced toxicity. For the purpose, interaction of β-bound CUR with calf thymus DNA (ctDNA) has been examined intensely using a series of biophysical methods like absorption, steady state fluorescence emission, and circular dichroism together with molecular docking study. The experimental analysis divulge that CUR interacts with both β-CD (although with different molar ratio) and DNA. However, the binding affinity of CUR with the target (DNA) is higher than it does with the β-CD. When β-CD-carried (10 mM) CUR (μM) (inclusion complex) comes near DNA (15-372 μM), CUR gets out from β-CD's void and approaches to binds with the DNA. The relocation of the probe occurred due to competitive binding of the CUR between β-CD and the DNA. The present investigation may provide a simple yet probable route for the transfer of encapsulated therapeutic payload of β-CD to the most relevant biomolecular target DNA.

In vitro and in silico studies of the inclusion complexation of 8-bromobaicalein with β-cyclodextrins

Baicalein, a flavone derived from Scutellaria baicalensis Georgi, exhibits potent anti-inflammatory, antiviral, and anticancer properties. Its derivative, known as 8-bromobaicalein (BB), has been found to have strong cytotoxic effect on MCF-7 human breast cancer cells. However, its limited solubility in water has hindered its potential for wider applications. To address this issue, we investigated the use of cyclodextrins specifically βCD, 2,6-di-O-methyl-β-cyclodextrin (DMβCD), and hydroxypropyl-β-cyclodextrin (HPβCD) to improve the solubility of BB through inclusion complexation. During 250 ns molecular dynamics simulations, it was found that BB can form inclusion complexes with all βCDs. These complexes exhibit two distinct orientations: chromone group insertion (C-form) and phenyl group insertion (P-form). The formation of these complexes is primarily driven by van der Waals interactions. DMβCD has the highest number of atom contacts with BB and the lowest solvent accessibility in the hydrophobic cavity. These results coincide with the highest binding affinity from the MM/GBSA-based free energy calculation method. Experimental phase solubility diagrams revealed a 1:1 stoichiometric ratio (AL type) between BB and βCDs, in which BB/DMβCD showed the highest stability. The formation of inclusion complexes was confirmed by differential scanning calorimetry and scanning electron microscope methods. Additionally, the BB/DMβCD inclusion complex demonstrated significantly higher anticancer activity against MCF-7 human breast cancer cells compared to BB alone. These findings underscore the potential of DMβCD for formulating BB in pharmaceutical and medical applications.

Aqueous eye drop formulations: Cyclodextrins as enabling excipients

Cyclodextrins are enabling pharmaceutical excipients that solubilize and stabilize drugs in aqueous formulations. Cyclodextrins possess very favorable pharmacokinetic and toxicological profiles and are commonly used in marketed drug products for oral and parenteral administration. However, their use in ophthalmic products is still very limited. Cyclodextrins have a broad range of physical properties that are specifically appropriate for designing topical ophthalmic dosage forms. Additionally, both the regulatory and intellectual property environments have been cleared over the last years and should foster their use for designing new drugs for ophthalmic use.

Antiseptics: An expeditious third force in the prevention and management of coronavirus diseases

Notably, severe acute respiratory syndrome (SARS), Middle East respiratory syndrome (MERS) and coronavirus disease 2019 (COVID-19) have all had significant negative impact on global health and economy. COVID-19 alone, has resulted to millions of deaths with new cases and mortality still being reported in its various waves. The development and use of vaccines have not stopped the transmission of SARS coronavirus 2 (SARS-CoV-2), the etiological agent of COVID-19, even among vaccinated individuals. The use of vaccines and curative drugs should be supplemented with adoption of simple hygiene preventive measures in the fight against the spread of the virus, especially for healthcare workers. Several virucidal topical antiseptics, such as povidone-iodine (PVP-I), citrox, cyclodextrins among others, have been demonstrated to be efficacious in the inactivation of SARS-CoV-2 and other coronaviruses in both in vitro and in vivo studies. The strategic application of these virucidal formulations could provide the additional impetus needed to effectively control the spread of the virus. We have here presented a simple dimension towards curtailing the dissemination of COVID-19, and other coronaviruses, through the application of effective oral, nasal and eye antiseptics among patients and medical personnel. We have further discussed the mechanism of action of some of these commonly available virucidal solutions while also highlighting some essential controversies in their use.

Binary and Ternary Inclusion Complexes of Niflumic Acid: Synthesis, Characterization, and Dissolution Profile

Although niflumic acid (NA) is one of the most used non-steroidal anti-inflammatory drugs, it suffers from poor solubility, low bioavailability, and significant adverse effects. To address these limitations, the complexation of NA with cyclodextrins (CDs) is a promising strategy. However, complexing CDs with low molecular weight drugs like NA can lead to low CE. This study explores the development of inclusion complexes of NA with 2-hydroxypropyl-β-cyclodextrin (2HP-β-CD), including the effect of converting NA to its sodium salt (NAs) and adding hydroxypropyl methylcellulose (HPMC) on complex formation. Inclusion complexes were prepared using co-evaporation solvent and freeze-drying methods, and their CE and Ks were determined through a phase solubility study. The complexes were characterized using physicochemical analyses, including FT-IR, DSC, SEM, XRD, DLS, UV-Vis, 1H-NMR, and 1H-ROESY. The dissolution profiles of the complexes were also evaluated. The analyses confirmed complex formation for all systems, demonstrating drug-cyclodextrin interactions, amorphous drug states, morphological changes, and improved solubility and dissolution profiles. The NAs-2HP-β-CD-HPMC complex exhibited the highest CE and Ks values, a 1:1 host-guest molar ratio, and the best dissolution profile. The results indicate that the NAs-2HP-β-CD-HPMC complex has potential for delivering NA, which might enhance its therapeutic effectiveness and minimize side effects.

Delivery Strategies of siRNA Therapeutics for Hair Loss Therapy

Therapeutic needs for hair loss are intended to find small interfering ribonucleic acid (siRNA) therapeutics for breakthrough. Since naked siRNA is restricted to meet a druggable target in clinic,, delivery systems are indispensable to overcome intrinsic and pathophysiological barriers, enhancing targetability and persistency to ensure safety, efficacy, and effectiveness. Diverse carriers repurposed from small molecules to siRNA can be systematically or locally employed in hair loss therapy, followed by the adoption of new compositions associated with structural and environmental modification. The siRNA delivery systems have been extensively studied via conjugation or nanoparticle formulation to improve their fate in vitro and in vivo. In this review, we introduce clinically tunable siRNA delivery systems for hair loss based on design principles, after analyzing clinical trials in hair loss and currently approved siRNA therapeutics. We further discuss a strategic research framework for optimized siRNA delivery in hair loss from the scientific perspective of clinical translation.

Nanotechnological Approaches to Enhance the Potential of α-Lipoic Acid for Application in the Clinic

α-lipoic acid is a naturally occurring compound with potent antioxidant properties that helps protect cells and tissues from oxidative stress. Its incorporation into nanoplatforms can affect factors like bioavailability, stability, reactivity, and targeted delivery. Nanoformulations of α-lipoic acid can significantly enhance its solubility and absorption, making it more bioavailable. While α-lipoic acid can be prone to degradation in its free form, encapsulation within nanoparticles ensures its stability over time, and its release in a controlled and sustained manner to the targeted tissues and cells. In addition, α-lipoic acid can be combined with other compounds, such as other antioxidants, drugs, or nanomaterials, to create synergistic effects that enhance their overall therapeutic benefits or hinder their potential cytotoxicity. This review outlines the advantages and drawbacks associated with the use of α-lipoic acid, as well as various nanotechnological approaches employed to enhance its therapeutic effectiveness, whether alone or in combination with other bioactive agents. Furthermore, it describes the engineering of α-lipoic acid to produce poly(α-lipoic acid) nanoparticles, which hold promise as an effective drug delivery system.

Anti-Candida activity and in vitro toxicity screening of antifungals complexed with β-cyclodextrin

The emergence of resistant fungal species and the toxicity of currently available antifungal drugs are relevant issues that require special consideration. Cyclodextrins inclusion complexes could optimize the antimicrobial activity of such drugs and create a controlled release system with few side effects. This study aimed to assess the in vitro toxicity and antifungal effectiveness of nystatin (Nys) and chlorhexidine (Chx) complexed or not with β-cyclodextrin (βCD). First, a drug toxicity screening was performed through the Artemia salina bioassay. Then, the minimum inhibitory concentrations (MICs) against Candida albicans were determined with the broth microdilution test. After MICs determination, the cytotoxicity of the drugs was evaluated through the methyl-thiazolyl-tetrazolium (MTT) and neutral red (NR) assays and through cell morphology analysis. The PROBIT analysis was used to determine the median lethal concentration (LC50), and the cell viability values were submitted to one-way analysis of variance(ANOVA)/Tukey (α = 0.05). Overall, the βCD-complexed antifungals were less toxic against A. salina than their raw forms, suggesting that inclusion complexes can reduce the toxicity of drugs. The MICs obtained were as follows: Nys 0.5 mg/L; Nys:βCD 4 mg/L; Chx 4 mg/L; and Chx:βCD 8 mg/L. Chx showed significant cytotoxicity (MTT: 12.9 ± 9.6%; NR: 10.6 ± 12.5%) and promoted important morphological changes. Cells exposed to the other drugs showed viability above 70% with no cellular damage. These results suggest that antifungals complexed with βCD might be a biocompatible option for the treatment of Candida-related infections.

The synergistic effect of metal ions and amino acids on the fermentation of β-CGTase-producing statin DF257

To meet the growing demand of β-cyclodextrin (CD), innovative approaches are being developed to improve the production of β-CD by β-cyclodextrin glucose-transferase (CGTase). Considering the low production and efficacy of wild-type β-CGTase-producing strains, to obtain the strains suitable for industrial production of β-CGTase, the recombinant engineered bacteria strain DF257 is constructed by transfecting with the plasmid expressing His tagged β-CGTase. The fermentation of β-CGTase-expressing DF257 was optimized in the presence of different metal ions, amino acids, and incubated at a certain temperature and pH condition. The results showed that when Mg2+ and isoleucine were added into the culture medium at 0.5 mM and 0.5 g/L, respectively, the enzyme activity of β-CGTase increased significantly after incubation at 37 °C with the initial pH of 7.5. In addition, the optimal temperature for β-CGTase with the addition of Mg2+ and isoleucine was also determined. The T half of β-CGTase under 50, 55, 60 and 65 °C was 9.5, 8.8, 6.2 and 1.2 h, respectively. Further investigation showed that β-CGTase kept stable under the pH 6.0-10.0, and pH 7.5 was identified as the optimal pH condition of β-CGTase. With the addition of Mg2+ and isoleucine, the kinetic properties of β-CGTase in the cyclization reaction had a similar form with Michaelis equation under 50 °C and pH 7.5, and Vmax, Km, and Kcat was 3.74 mg/mL/min, 3.28 mg/mL, and 31.17/s, respectively. The possible underlying mechanism by which Mg2+ and isoleucine synergistically improved the thermostability of β-CGTase was investigated by the surface hydrophobicity index analysis, Fourier transform infrared spectroscopy and differential scanning calorimetry (DSC) analysis. The results indicated that addition of Mg2+ and isoleucine maintained the spatial structure and enhanced the thermostability of β-CGTase. These findings provided a theoretical basis for realizing the industrialization application of β-CGTase in promoting the generation of β-CD.

Chitosan and Cyclodextrins-Versatile Materials Used to Create Drug Delivery Systems for Gastrointestinal Cancers

Gastrointestinal cancers are characterized by a frequent incidence, a high number of associated deaths, and a tremendous burden on the medical system and patients worldwide. As conventional chemotherapeutic drugs face numerous limitations, researchers started to investigate better alternatives for extending drug efficacy and limiting adverse effects. A remarkably increasing interest has been addressed to chitosan and cyclodextrins, two highly versatile natural carbohydrate materials endowed with unique physicochemical properties. In this respect, numerous studies reported on fabricating various chitosan and cyclodextrin-based formulations that enabled prolonged circulation times, improved cellular internalization of carried drugs, preferential uptake by the targeted cells, reduced side effects, enhanced apoptosis rates, and increased tumor suppression rates. Therefore, this paper aims to briefly present the advantageous properties of these oligo- and polysaccharides for designing drug delivery systems, further focusing the discussion on nanocarrier systems based on chitosan/cyclodextrins for treating different gastrointestinal cancers. Specifically, there are reviewed studies describing promising solutions for colorectal, liver, gastric, pancreatic, and other types of cancers of the digestive system towards creating an updated framework of what concerns anticancer chitosan/cyclodextrin-based drug delivery systems.

Curcumin-loaded methacrylate pullulan with grafted carboxymethyl-β-cyclodextrin to form hydrogels for wound healing: In vitro evaluation

A pullulan (Pul)-derivative hydrogel was developed by introducing methacrylate (MA) groups and β-cyclodextrin (βCD) to form a Pul-βCD-MA hydrogel by UV cross-linking. The MA was expected to improve the hydrogel's mechanical properties and the βCD to increase the solubility of curcumin. Pul-βCD-MA was successfully synthesized, as confirmed by the 1H NMR and FTIR spectra. Hydrogels were formed at Pul-βCD-MA concentrations of 5 %, 7.5 %, or 10 % w/v. Pul-βCD-MA showed enhanced curcumin solubility compared to Pul or Pul-MA. The morphological analysis of the hydrogel showed a porous structure. The concentration of βCD affected the hydrogels' mechanical properties, and the 7.5 % hydrogel (with or without curcumin) did not fracture. The cumulative release of curcumin in the 7.5 % Pul-βCD-MA hydrogel was 60 % over 8 h. The release profile fit the Korsmeyer-Peppas model. In vitro cytotoxicity tests revealed that hydrogels were biocompatible with human primary dermal fibroblast cells. Curcumin-loaded Pul-βCD-MA hydrogels significantly accelerated wound healing compared to Pul-βCD-MA hydrogels without curcumin loading. Therefore, the Pul derivative's hydrogel may be a promising material for wound healing.

Active and Intelligent Packaging: A Review of the Possible Application of Cyclodextrins in Food Storage and Safety Indicators

Natural cyclodextrins (CDs) can be formed by 6, 7, or 8 glucose molecules (α-, β-, and γ-, respectively) linked in a ring, creating a cone shape. Its interior has an affinity for hydrophobic molecules, while the exterior is hydrophilic and can interact with water molecules. This feature has been used to develop active packaging applied to food, interacting with the product or its environment to improve one or more aspects of its quality or safety. It also provides monitoring information when food is optimal for consumption, as intelligent packaging is essential for the consumer and the merchant. Therefore, this review will focus on discerning which packaging is most appropriate for each situation, solubility and toxicological considerations, characterization techniques, effect on the guest properties, and other aspects related to forming the inclusion complex with bioactive molecules applied to packaging.

Newly Synthesized CoFe2-xDyxO4 (x = 0; 0.1; 0.2; 0.4) Nanoparticles Reveal Promising Anticancer Activity against Melanoma (A375) and Breast Cancer (MCF-7) Cells

The current study focuses on the synthesis via combustion of dysprosium-doped cobalt ferrites that were subsequently physicochemically analyzed in terms of morphological and magnetic properties. Three types of doped nanoparticles were prepared containing different Dy substitutions and coated with HPGCD for higher dispersion properties and biocompatibility, and were later submitted to biological tests in order to reveal their potential anticancer utility. Experimental data obtained through FTIR, XRD, SEM and TEM confirmed the inclusion of Dy3+ ions in the nanoparticles' structure. The size of the newly formed nanoparticles ranged between 20 and 50 nm revealing an inverse proportional relationship with the Dy content. Magnetic studies conducted by VSM indicated a decrease in remanent and saturation mass magnetization, respectively, in Dy-doped nanoparticles in a direct proportionality with the Dy content; the decrease was further amplified by cyclodextrin complexation. Biological assessment in the presence/absence of red light revealed a significant cytotoxic activity in melanoma (A375) and breast (MCF-7) cancer cells, while healthy keratinocytes (HaCaT) remained generally unaffected, thus revealing adequate selectivity. The investigation of the underlying cytotoxic molecular mechanism revealed an apoptotic process as indicated by nuclear fragmentation and shrinkage, as well as by Western blot analysis of caspase 9, p53 and cyclin D1 proteins. The anticancer activity for all doped Co ferrites varied was in a direct correlation to their Dy content but without being affected by the red light irradiation.

Highly Active Myeloid Therapy for Cancer

Tumor-associated macrophages (TAM) interact with cancer and stromal cells and are integral to sustaining many cancer-promoting features. Therapeutic manipulation of TAM could therefore improve clinical outcomes and synergize with immunotherapy and other cancer therapies. While different nanocarriers have been used to target TAM, a knowledge gap exists on which TAM pathways to target and what payloads to deliver for optimal antitumor effects. We hypothesized that a multipart combination involving the Janus tyrosine kinase (JAK), noncanonical nuclear factor kappa light chain enhancer of activated B cells (NF-κB), and toll-like receptor (TLR) pathways could lead to a highly active myeloid therapy (HAMT). Thus, we devised a screen to determine drug combinations that yield maximum IL-12 production from myeloid cells to treat the otherwise highly immunosuppressive myeloid environments in tumors. Here we show the extraordinary efficacy of a triple small-molecule combination in a TAM-targeted nanoparticle for eradicating murine tumors, jumpstarting a highly efficient antitumor response by adopting a distinctive antitumor TAM phenotype and synergizing with other immunotherapies. The HAMT therapy represents a recently developed approach in immunotherapy and leads to durable responses in murine cancer models.

Enhancing solubility and stability of sorafenib through cyclodextrin-based inclusion complexation: in silico and in vitro studies

Sorafenib (SOR) is an oral multikinase inhibitor that effectively hampers the growth and spread of cancer cells by targeting angiogenesis and proliferation. However, SOR tablets (Nexavar) have limited oral bioavailability, ranging from 38% to 49%, due to their low water solubility. To address this issue, cyclodextrins (CDs), widely used to enhance the solubility and stability of lipophilic drugs by encapsulating them within their molecular structure, were considered in this study. We focused on β-cyclodextrin (βCD) and its derivatives, including hydroxypropyl-β-cyclodextrin (HPβCD), dimethyl-β-cyclodextrin (DMβCD), sulfobutylether-β-cyclodextrin (SBEβCD), and compared them with γ-cyclodextrin (γCD) for generating inclusion complexes with SOR. The 200 ns molecular dynamics simulations revealed that SOR could form inclusion complexes with all CDs in two possible orientations: pyridine group insertion (P-form) and chlorobenzotrifluoride group insertion (C-form), primarily driven by van der Waals interactions. Among the four βCD derivatives studied, SOR exhibited the highest number of atom contacts with SBEβCD and demonstrated the lowest solvent accessibility within the hydrophobic cavity of SBEβCD. These findings correlated with the highest binding affinity of SOR/SBEβCD complex determined by SIE, MM/GBSA, and MM/PBSA methods. Experimental results further supported our computational predictions, in which SBEβCD exhibited a stability constant of 940 M-1 at 25 °C, surpassing βCD's stability constant of 210 M-1. Taken together, our results suggest that the modified CDs, particularly SBEβCD, hold promising potential as an efficient molecular encapsulating agent for SOR, offering improved solubility and stability for this lipophilic drug.

Continuous Manufacturing of Solvent-Free Cyclodextrin Inclusion Complexes for Enhanced Drug Solubility via Hot-Melt Extrusion: A Quality by Design Approach

Conventional cyclodextrin complexation enhances the solubility of poorly soluble drugs but is solvent-intensive and environmentally unfavorable. This study evaluated solvent-free hot-melt extrusion (HME) for forming cyclodextrin inclusion complexes to improve the solubility and dissolution of ibuprofen (IBU). Molecular docking confirmed IBU's hosting in Hydroxypropyl-β-cyclodextrin (HPβ-CD), while phase solubility revealed its complex stoichiometry and stability. In addition, an 11 mm twin-screw co-rotating extruder with PVP VA-64 as an auxiliary substance aided the complex formation and extrusion. Using QbD and the Box-Behnken design, we studied variables (barrel temperature, screw speed, and polymer concentration) and their impact on solubility and dissolution. The high polymer concentration and high screw speeds positively affected the dependent variables. However, higher temperatures had a negative effect. The lowest barrel temperature set near the Tg of the polymer, when combined with high polymer concentrations, resulted in high torques in HME and halted the extrusion process. Therefore, the temperature and polymer concentration should be selected to provide sufficient melt viscosities to aid the complex formation and extrusion process. Studies such as DSC and XRD revealed the amorphous conversion of IBU, while the inclusion complex formation was demonstrated by ATR and NMR studies. The dissolution of ternary inclusion complexes (TIC) produced from HME was found to be ≥85% released within 30 min. This finding implied the high solubility of IBU, according to the US FDA 2018 guidance for highly soluble compounds containing immediate-release solid oral dosage forms. Overall, the studies revealed the effect of various process parameters on the formation of CD inclusion complexes via HME.

Short Review on the Biological Activity of Cyclodextrin-Drug Inclusion Complexes Applicable in Veterinary Therapy

Cyclodextrins (CDs) are a family of carrier molecules used to improve the pharmacokinetic parameters of therapeutic molecules. These cyclic oligosaccharides have medical and pharmaceutical applications by being able to form inclusion complexes with molecules that are poorly soluble in water. The benefits of these complexes are directed towards improving the chemical and biological properties-i.e., solubility, bioavailability, stability, non-toxicity and shelf life of drug molecules. Since the 1960s, the first inclusion complexes used in therapeutics were those with α-, β- and γ-CD, which proved their usefulness, but had certain degrees of particularly renal toxicity. Currently, to correct these deficiencies, β-CD derivatives are most frequently used, such as sulfobutylether-β-CD, hydroxypropyl-β-CD, etc. Therefore, it is of interest to bring to the attention of those interested the diversity of current and potential future clinical applications of inclusion complexes in veterinary medicine and to present the contribution of these inclusion complexes in improving drug efficacy. The most important biological activities of β-CD complexed molecules in the veterinary field are summarized in this short review.

Preclinical Investigation of Transdermal Route for Enhanced Bio-performance of Duloxetine HCl

The aim of the study was to develop and optimise drug-in-adhesive (DIA) transdermal patch of duloxetine HCl for enhanced drug delivery. DIA patch so developed reduced the dose and dosing frequency by enhancing bio-performance of the drug. A transdermal DIA patch having Duro-Tak 87-2287 as DIA polymer and Transcutol P as permeation enhancer loaded with 40% drug previously complexed with MeβCD duly characterised (FTIR, DSC, and SEM) was developed for in vivo study. Pharmacokinetic parameters of developed formulation were assessed and compared with oral route of administration. Among various permeation enhancers (PEs), Transcutol P exhibited most enhanced permeation (ER ≈ 1.99) in terms of flux and Q24 compared to control group having. Mean of maximum plasma concentration (Cmax) and area under time-concentration curve (AUC0-72) in Wistar rats (n = 6) for transdermal patch (10 mg/kg) was found to be 70.31 ± 11.2 ng/ml and 2997.29 ± 387.4 ng/ml*h, respectively, and were considerably higher than oral dose of DLX (20 mg/kg and 10 mg/kg). Albeit, T1/2 was higher in case of transdermal delivery, but this was due to sustained behaviour of delivery system. These findings highlight the significance of both inclusion complexation and transdermal delivery of DLX using DIA patch for efficient drug absorption.

Cyclodextrin-enabled nepafenac eye drops with improved absorption open a new therapeutic window

Nepafenac is a highly effective NSAID used for treating postoperative ocular inflammation and pain after cataract surgery and its advantage over conventional topical NSAIDs has been proved many times. However, Nevanac® is a suspension eye drop, which clearly lacks patient compliance causing irritation, blurred vision, foreign body sensation along with problematic dosage due to its sticky, inhomogeneous consistence. In this study, nepafenac containing eye drops were prepared using hydroxypropyl-β-cyclodextrin to ensure complete dissolution of nepafenac, sodium hyaluronate to provide mucoadhesion and adequate viscosity and a preservative-free officinal formula, Oculogutta Carbomerae containing carbomer (just like Nevanac®), therefore providing a similar base for the new formulations. According to an experimental design, 11 formulations were tested in vitro including two reference formulations by measuring their viscosity, mucoadhesion, drug release and corneal permeability. Finally, two formulations were found promising and investigated further on porcine eyes ex vivo and corneal distribution of nepafenac was determined by RAMAN mapping. The results showed that one formulation possessed better bioavailability ex vivo than Nevanac® 0.1 % suspension, while the other formulation containing only 60 % of the original dose were ex vivo equivalent with Nevanac® opening the way to nepafenac-containing eye drops with better patient compliance in the future.

Biomaterial-based gene therapy

Gene therapy, a medical approach that involves the correction or replacement of defective and abnormal genes, plays an essential role in the treatment of complex and refractory diseases, such as hereditary diseases, cancer, and rheumatic immune diseases. Nucleic acids alone do not easily enter the target cells due to their easy degradation in vivo and the structure of the target cell membranes. The introduction of genes into biological cells is often dependent on gene delivery vectors, such as adenoviral vectors, which are commonly used in gene therapy. However, traditional viral vectors have strong immunogenicity while also presenting a potential infection risk. Recently, biomaterials have attracted attention for use as efficient gene delivery vehicles, because they can avoid the drawbacks associated with viral vectors. Biomaterials can improve the biological stability of nucleic acids and the efficiency of intracellular gene delivery. This review is focused on biomaterial-based delivery systems in gene therapy and disease treatment. Herein, we review the recent developments and modalities of gene therapy. Additionally, we discuss nucleic acid delivery strategies, with a focus on biomaterial-based gene delivery systems. Furthermore, the current applications of biomaterial-based gene therapy are summarized.

Robust Inclusion Complex of Topotecan Comprised within a Rhodamine-Labeled β-Cyclodextrin: Competing Proton and Energy Transfer Processes

Monitoring the biological fate of medicaments within the environments of cancer cells is an important challenge which is nowadays the object of intensive studies. In this regard, rhodamine-based supramolecular systems are one of the most suitable probes used in drug delivery thanks to their high emission quantum yield and sensitivity to the environment which helps to track the medicament in real time. In this work, we used steady-state and time-resolved spectroscopy techniques to investigate the dynamics of the anticancer drug, topotecan (TPT), in water (pH ~6.2) in the presence of a rhodamine-labeled methylated β-cyclodextrin (RB-RM-βCD). A stable complex of 1:1 stoichiometry is formed with a K_eq value of ~4 × 10⁴ M^-1 at room temperature. The fluorescence signal of the caged TPT is reduced due to: (1) the CD confinement effect; and (2) a Förster resonance energy transfer (FRET) process from the trapped drug to the RB-RM-βCD occurring in ~43 ps with 40% efficiency. These findings provide additional knowledge about the spectroscopic and photodynamic interactions between drugs and fluorescent functionalized CDs, and may lead to the design of new fluorescent CD-based host-guest nanosystems with efficient FRET to be used in bioimaging for drug delivery monitoring.

Cyclodextrin regulated natural polysaccharide hydrogels for biomedical applications-a review

Cyclodextrin and its derivative (CDs) are natural building blocks for linking with other components to afford functional biomaterials. Hydrogels are polymer network systems that can form hydrophilic three-dimensional network structures through different cross-linking methods and are developing as potential materials in biomedical applications. Natural polysaccharide hydrogels (NPHs) are widely adopted in biomedical field with good biocompatibility, biodegradability, low cytotoxicity, and versatility in emulating natural tissue properties. Compared with conventional NPHs, CD regulated natural polysaccharide hydrogels (CD-NPHs) maintain good biocompatibility, while improving poor mechanical qualities and unpredictable gelation times. Recently, there has been increasing and considerable usage of CD-NPHs while there is still no review comprehensively introducing their construction, classification, and application of these hydrogels from the material point of view regarding biomedical fields. To draw a complete picture of the current and future development of CD-NPHs, we systematically overview the classification of CD-NPHs, and provide a holistic view on the role of CD-NPHs in different biomedical fields, especially in drug delivery, wound dressing, cell encapsulation, and tissue engineering. Moreover, the current challenges and prospects of CD-NPHs are discussed rationally, providing an insight into developing vibrant fields of CD-NPHs-based biomedicine, and facilitating their translation from bench to clinical medicine.

Effects of Usnic Acid to Prevent Infections by Creating a Protective Barrier in an In Vitro Study

Nasal sprays are medical devices useful for preventing infection and the subsequent spread of airborne pathogens. The effectiveness of these devices depends on the activity of chosen compounds which can create a physical barrier against viral uptake as well as incorporate different substances with antiviral activity. Among antiviral compounds, UA, a dibenzofuran derived from lichens, has the mechanical ability to modify its structure by creating a branch capable of forming a protective barrier. The mechanical ability of UA to protect cells from virus infection was investigated by analyzing the branching capacity of UA, and then the protection mechanism in an in vitro model was also studied. As expected, UA at 37 °C was able to create a barrier confirming its ramification property. At the same time, UA was able to block the infection of Vero E6 and HNEpC cells by interfering with a biological interaction between cells and viruses as revealed also by the UA quantification. Therefore, UA can block virus activity through a mechanical barrier effect without altering the physiological nasal homeostasis. The findings of this research could be of great relevance in view of the growing alarm regarding the spread of airborne viral diseases.

Anticancer potential of curcumin-cyclodextrin complexes and their pharmacokinetic properties

Cancer is one of the most common diseases throughout the world, with many treatment modalities currently being used, and new treatment strategies being sought. Most chemotherapeutic molecules have shown extensive toxicity for normal cells, which leads to severe adverse effects. Chemotherapy may also lead to drug resistance, which is one of the major obstacles to the clinical treatment of cancer. Curcumin, a polyphenolic natural compound, has long been considered a therapeutic molecule for a variety of diseases and possesses anti-cancer, anti-oxidant, and anti-inflammatory properties. However, its use is limited due to its hydrophobic nature, poor solubility in water at acidic or neutral pH, and limited bioavailability at the tumor site. Cyclodextrin complexes of curcumin increase curcumin's water solubility, as well as its physicochemical stability to hydrolysis and photochemical decomposition. The most common type of cyclodextrin used for pharmaceutical preparations is β-cyclodextrin. This review focuses on different curcumin-cyclodextrin formulations and compares their pharmacokinetic parameters and efficacy.

Regularities of Encapsulation of Tolfenamic Acid and Some Other Non-Steroidal Anti-Inflammatory Drugs in Metal-Organic Framework Based on γ-Cyclodextrin

Metal-organic frameworks based on cyclodextrins (CDs) have been proposed as promising drug delivery systems due to their large surface area, variable pore size, and biocompatibility. In the current work, we investigated an incorporation of tolfenamic acid (TA), a representative of non-steroidal anti-inflammatory drugs (NSAIDs), in a metal-organic framework based on γ-cyclodextrin and potassium cations (γCD-MOF). Composites γCD-MOF/TA obtained by absorption and co-crystallization methods were characterized using powder X-ray diffraction, low temperature nitrogen adsorption/desorption, scanning electron microscopy, and FTIR spectroscopy. It was demonstrated that TA loaded in γCD-MOF has an improved dissolution profile. However, the inclusion of TA in γ-CD reduces the membrane permeability of the drug. A comparative analysis of the encapsulation of different NSAIDs in γCD-MOF was performed. The impact of NSAID structure on the loading capacity was considered for the first time. It was revealed that the presence of heterocycles in the structure and drug lipophilicity influence the loading efficiency of NSAIDs in γCD-MOF.

Implementing polymeric pseudorotaxanes for boosting corneal permeability and antiaspergillus activity of tolnaftate: formulation development, statistical optimization, ex vivo permeation and in vivo assessment

Fungal keratitis (FK) is a devastating ocular disease that can cause corneal opacity and blindness if not treated effectively. Tolnaftate (TOL) is a selective fungicidal drug against Aspergillus spp. which are among the most common causes of mycotic keratitis. TOL is lipophilic drug with low water solubility and permeation which act as obstacles for its clinical ocular efficacy. Hence, this study aimed to statistically optimize a novel polymeric pseudorotaxanes (PSRs) containing TOL for enhancing its ocular permeability and antifungal effect. For achieving this goal, a full 3¹.2² factorial design was fashioned for preparing and optimizing TOL-PSRs using film hydration technique. Three formulation variables were studied: drug amount (X₁), weight ratio of Pluronics to HPβCD (X₂) and Pluronic system (X₃). Entrapment efficiency percent (EE%) (Y₁), particle size (PS) (Y₂) and zeta potential (ZP) (Y₃) were set as dependent variables. The selected optimal TOL-PSRs (PSR1) showed EE% of 71.55 ± 2.90%, PS of 237.05 ± 12.80 nm and ZP of −32.65 ± 0.92 mV. In addition, PSR1 was compared to conventional polymeric mixed micelles (PMMs) and both carriers significantly increased the drug flux and resulted in higher amount permeated per unit area in 8 h compared to drug suspension. The histopathological studies assured the safety of PSR1 for ocular use. The in vivo susceptibility testing using Aspergillus niger confirmed that PSR1 displayed sustained antifungal activity up to 24 h. The obtained results revealed the admirable potential of PSR1 to be used as novel nanocarriers for promoting TOL ocular delivery.

A rotaxane-based platform for tailoring the pharmacokinetics of cancer-targeted radiotracers

Radiolabelled monoclonal antibodies (mAbs) are a cornerstone of molecular diagnostic imaging and targeted radioimmunotherapy in nuclear medicine, but one of the major challenges in the field is to identify ways of reducing the radiation burden to patients. We reasoned that a rotaxane-based platform featuring a non-covalent mechanical bond between the radionuclide complex and the biologically active mAb could offer new ways of controlling the biophysical properties of cancer-specific radiotracers for positron emission tomography (PET). Herein, we present the photoradiosynthesis and characterisation of [⁸⁹Zr]ZrFe-[4]rotaxane-azepin-onartuzumab ([⁸⁹Zr]ZrFe-2), a unique rotaxane-antibody conjugate for PET imaging and quantification of the human hepatocyte growth factor receptor (c-MET). Multiple component self-assembly reactions were combined with simultaneous ⁸⁹Zr-radiolabelling and light-induced bioconjugation methods to give [⁸⁹Zr]ZrFe-2 in 15 ± 1% (n = 3) decay-corrected radiochemical yield, with >90% radiochemical purity, and molar activities suitable for PET imaging studies (>6.1 MBq mg^-1 of protein). Cellular assays confirmed the specificity of [⁸⁹Zr]ZrFe-2 binding to the c-MET receptor. Temporal PET imaging in athymic nude mice bearing subcutaneous MKN-45 gastric adenocarcinoma xenografts demonstrated specific binding of [⁸⁹Zr]ZrFe-2 toward c-MET in vivo, where tumour uptake reached 9.8 ± 1.3 %ID g^-1 (72 h, n = 5) in a normal group and was reduced by ∼56% in a control (blocking) group. Head-to-head comparison of the biodistribution and excretion profile of [⁸⁹Zr]ZrFe-2versus two control compounds, alongside characterisation of two potential metabolites, showed that the rotaxane-radiotracer has an improved clearance profile with higher tumour-to-tissue contrast ratios and reduced radiation exposure to critical (dose-limiting) organs including liver, spleen, and kidneys. Collectively, the experimental results suggested that non-covalent mechanical bonds between the radionuclide and mAb can be used to fine-tune the pharmacokinetic profile of supramolecular radiopharmaceuticals in ways that are simply not accessible when using traditional covalent design.

An Updated Overview of Cyclodextrin-Based Drug Delivery Systems for Cancer Therapy

Encompassing a group of complex and heterogeneous diseases, cancer continues to be a challenge for patients and healthcare systems worldwide. Thus, it is of vital importance to develop advanced treatment strategies that could reduce the trends of cancer-associated morbidity and mortality rates. Scientists have focused on creating performant delivery vehicles for anti-cancer agents. Among the possible materials, cyclodextrins (CDs) attracted increasing interest over the past few years, leading to the emergence of promising anti-tumor nanomedicines. Tackling their advantageous chemical structure, ease of modification, natural origin, biocompatibility, low immunogenicity, and commercial availability, researchers investigated CD-based therapeutical formulations against many types of cancer. In this respect, in this paper, we briefly present the properties of interest of CDs for designing performant nanocarriers, further reviewing some of the most recent potential applications of CD-based delivery systems in cancer management.

An Updated Overview of Cyclodextrin-Based Drug Delivery Systems for Cancer Therapy

Encompassing a group of complex and heterogeneous diseases, cancer continues to be a challenge for patients and healthcare systems worldwide. Thus, it is of vital importance to develop advanced treatment strategies that could reduce the trends of cancer-associated morbidity and mortality rates. Scientists have focused on creating performant delivery vehicles for anti-cancer agents. Among the possible materials, cyclodextrins (CDs) attracted increasing interest over the past few years, leading to the emergence of promising anti-tumor nanomedicines. Tackling their advantageous chemical structure, ease of modification, natural origin, biocompatibility, low immunogenicity, and commercial availability, researchers investigated CD-based therapeutical formulations against many types of cancer. In this respect, in this paper, we briefly present the properties of interest of CDs for designing performant nanocarriers, further reviewing some of the most recent potential applications of CD-based delivery systems in cancer management.

Specific extraction of nucleic acids employing pillar[6]arene-functionalized nanochannel platforms

The rapid extraction of high-purity nucleic acids from complex biological samples using conventional methods is complicated. Therefore, in this study, glycine-pillar[6]arene (Gly-P6)-functionalized tapered nanochannels were constructed using 32-mer single-stranded E. coli DNA (ssDNA) as a model sequence, which can selectively transport ssDNA by multiple noncovalent forces (transport flux of 2.65 nM cm^-2 h^-1) under the interference of amino acids and other substances. In view of these prospective results, the selective transport of nucleic acids with nanochannels could be applied in the design of nucleic acid enrichment and separation systems in the future.

The impact of the size of acetylated cyclodextrin on the stability of amorphous metronidazole

Modified oligosaccharides with cyclic topology seem to be promising excipients for the preparation of Amorphous Solid Dispersions (ASDs), especially with those Active Pharmaceutical Ingredients (APIs), which have a strong crystallization tendency from the amorphous/glassy state. Herein, the usefulness of two acetylated cyclodextrins (ac-α-CD and ac-β-CD) with various molecular weights (M_w) as stabilizers for the supercooled metronidazole (Met) has been discussed. X-ray diffraction (XRD) studies carried out on Met-acCDs mixtures (prepared in molar ratios from 1:2 to 5:1) showed that the system with ac-α-CD containing the highest amount of API (5:1 m/m) crystallizes immediately after preparation, whereas all Met-ac-β-CD ASDs remain stable. What is more, long-term XRD measurements confirmed that the Met-ac-α-CD 2:1 m/m system crystallizes after 100 days of storage in contrast to the same system containing ac-β-CD. The non-isothermal calorimetric data revealed that the activation barrier for crystallization (E_cr) in ASDs with the oligosaccharide having a greater M_w (i.e., composed of seven acGLU molecules) is slightly higher. Finally, to explain the differences in behavior between the mixtures with both acCDs, infrared studies, DFT calculations and Molecular Dynamics simulations were performed. All methods excluded the scenario of API incorporation inside the acCDs' core. On the other hand, obtained results suggested that in comparison to ac-α-CD, the greater amount of Met molecules might be bounded on the outside surface of ac-β-CD. Therefore, this modified saccharide is a better stabilizer of the examined API.

Mucoadhesive and Antimicrobial Allantoin/β Cyclodextrins-Loaded Carbopol Gels as Scaffolds for Regenerative Medicine

Allantoin and its β-cyclodextrin and hydroxypropyl-β-cyclodextrin inclusion complexes 1:1 have been used to prepare carbopol-based mucoadhesive gels. The gelation process occurred by adjustment with glycerol 10% in the presence of triethanolamine. The structural features induced by the presence of allantoin and the corresponding β-cyclodextrins inclusion complexes have been first investigated by infrared spectroscopy highlighting strong interactions within the gels network and ideal crosslinks for the self-healing behavior. The hydrophilicity of the gels was investigated by the determination of the surface tension parameters and the free energy of hydration. The interfacial free energy values indicated prolonged biocompatibility with blood. The gels-water molecule interactions in terms of sorption, permeability, and diffusion coefficients were evaluated by dynamic vapor sorption analysis. The self-assembly process through intermolecular H-bonding, the high hydrophilicity, the mechanical performance, the hydrolytic stability in simulated biological media, the biocompatibility with normal human dermal fibroblast (NHDF) cells, the mucoadhesivity and antimicrobial activity on selected microorganism species (S. Aureus and C. albicans) of the allantoin-based gels recommend them as promising scaffold alternatives in regenerative medicine.

Green biosynthesis of magnetic iron oxide nanoparticles using Mentha longifolia for imatinib mesylate delivery

In this work, the rapid, facile, and eco-friendly green process was introduced in the preparation of β-cyclodextrin/magnetic iron oxide nanoparticles by using the aqueous Mentha longifolia extracts of Mentha longifolia. The obtained nanoparticles were characterised by Fourier transform infrared spectroscopy, x-ray powder diffraction, field emission scanning electron microscope, and thermogravimetric analysis. Also, effective factors on the synthesis of magnetic nanocomposites including temperature, concentration of the Mentha longifolia extract, and concentration of FeSO₄ solution were optimised by Taguchi design. Moreover, important effective parameters on the adsorption efficiency; such as adsorbent dosage, pH, contact time, and temperature were investigated. The prepared magnetic nanocomposite was applied as a nanocarrier for imatinib mesylate delivery. In vitro studies confirmed imatinib mesylate release over 6 h. The nanocarrier showed pH-dependent imatinib mesylate release with higher drug release at simulated cancer fluid (pH = 5.6) compared to neural fluid (pH = 7.4). Moreover, the sorption isotherms and kinetics for the magnetic nanocomposite were fitted into Langmuir and pseudo-second order models, respectively. Based on the thermodynamic results, the adsorption of imatinib mesylate onto the nanoadsorbent was found to be spontaneous and exothermic.

Effect of Cyclodextrins on the Biofilm Formation Capacity of Pseudomonas aeruginosa PAO1

Quorum sensing (QS) is a population-density-dependent communication process of microorganisms to coordinate their activities by producing and detecting low-molecular-weight signal molecules. In pathogenic bacteria, the property controlled by QS is often related to infectivity, e.g., biofilm formation. Molecular encapsulation of the QS signals is an innovative method to prevent the signals binding to the receptors and to attenuate QS. Cyclodextrins (CDs) may form an inclusion complex with the signals, thus reducing the communication (quorum quenching, QQ). A systematic study was performed with α-, β-cyclodextrin, and their random methylated, quaternary amino and polymer derivatives to evaluate and compare their effects on the biofilm formation of Pseudomonas aeruginosa. To examine the concentration-, temperature- and time-dependency of the QQ effect, the CDs were applied at a 0.1–12.5 mM concentration range, and biofilm formation was studied after 6, 24, 48 and 72 h at 22 and 30 °C. According to the results, the QS mechanism was significantly inhibited; the size of the cavity, the structure of the substituents, as well as the monomeric or polymeric character together with the concentration of the CDs have been identified as key influencing factors of biofilm formation. Statistically determined effective concentration values demonstrated outstanding efficiency (higher than 80% inhibition) of α-CD and its random methylated and polymer derivatives both on the short and long term. In summary, the potential value of CDs as inhibitors of QS should be considered since the inhibition of biofilm formation could significantly impact human health and the environment.

Molecular docking assisted exploration on solubilization of poorly soluble drug remdesivir in sulfobutyl ether-tycyclodextrin

Objective

To study structure-specific solubilization effect of Sulfobutyl ether-β-cyclodextrin (SBE-β-CD) on Remdesivir (RDV) and to understand the experimental clathration with the aid of quantum mechanics (QM), molecular docking and molecular dynamics (MD) calculations.

Methods

The experiment was carried out by phase solubility method at various pH and temperatures, while the concentration of Remdesivir in the solution was determined by HPLC. The complexation mechanism and the pH dependence of drug loading were investigated following a novel procedure combining QM, MD and molecular docking, based on accurate pKa predictions.

Results

The phase solubility and solubilization effect of RDV in SBE-β-CD were explored kinetically and thermodynamically for each assessed condition. An optimal drug / SBE-β-CD feeding molar ratio was determined stoichiometrically for RDV solubility in pH1.7 solution. The supersaturated solubility was examined over time after pH of the solution was adjusted from 1.7 to 3.5. A possible hypothesis was raised to elucidate the experimentally observed stabilization of supersaturation based on the proposed RDV Cation A /SBE-β-CD pocket conformations.

Conclusion

The computational explorations conformed to the experimentally determined phase solubilization and well elucidated the mechanism of macroscopic clathration between RDV and SBE-β-CD from the perspective of microscopic molecular calculations.

Graphical Abstract

Targeted Transposition of Minicircle DNA Using Single-Chain Antibody Conjugated Cyclodextrin-Modified Poly (Propylene Imine) Nanocarriers

Among non-viral vectors, cationic polymers, such as poly(propylene imine) (PPI), play a prominent role in nucleic acid delivery. However, limitations of polycationic polymer-based DNA delivery systems are (i) insufficient target specificity, (ii) unsatisfactory transgene expression, and (iii) undesired transfer of therapeutic DNA into non-target cells. We developed single-chain antibody fragment (scFv)-directed hybrid polyplexes for targeted gene therapy of prostate stem cell antigen (PSCA)-positive tumors. Besides mono-biotinylated PSCA-specific single-chain antibodies (scFv(AM1-P-BAP)) conjugated to neutravidin, the hybrid polyplexes comprise β-cyclodextrin-modified PPI as well as biotin/maltose-modified PPI as carriers for minicircle DNAs encoding for Sleeping Beauty transposase and a transposon encoding the gene of interest. The PSCA-specific hybrid polyplexes efficiently delivered a GFP gene in PSCA-positive tumor cells, whereas control hybrid polyplexes showed low gene transfer efficiency. In an experimental gene therapy approach, targeted transposition of a codon-optimized p53 into p53-deficient HCT116^p53-/-/PSCA cells demonstrated decreased clonogenic survival when compared to mock controls. Noteworthily, p53 transposition in PTEN-deficient H4^PSCA glioma cells caused nearly complete loss of clonogenic survival. These results demonstrate the feasibility of combining tumor-targeting hybrid polyplexes and Sleeping Beauty gene transposition, which, due to the modular design, can be extended to other target genes and tumor entities.

Strategies to Improve Drug Strength in Nasal Preparations for Brain Delivery of Low Aqueous Solubility Drugs

Intranasal administration is a promising route for brain drug delivery. However, it can be difficult to formulate drugs that have low water solubility into high strength intranasal solutions. Hence, the purpose of this work was to review the strategies that have been used to increase drug strength in intranasal liquid formulations. Three main groups of strategies are: the use of solubilizers (change in pH, complexation and the use cosolvents/surfactants); incorporation of the drugs into a carrier nanosystem; modifications of the molecules themselves (use of salts or hydrophilic prodrugs). The use of high amounts of cosolvents and/or surfactants and pH decrease below 4 usually lead to local adverse effects, such as nasal and upper respiratory tract irritation. Cyclodextrins and (many) different carrier nanosystems, on the other hand, could be safer for intranasal administration at reasonably high concentrations, depending on selected excipients and their dose. While added attributes such as enhanced permeation, sustained delivery, or increased direct brain transport could be achieved, a great effort of optimization will be required. On the other hand, hydrophilic prodrugs, whether co-administered with a converting enzyme or not, can be used at very high concentrations, and have resulted in a fast prodrug to parent drug conversion and led to high brain drug levels. Nevertheless, the choice of which strategy to use will always depend on the characteristics of the drug and must be a case-by-case approach.

Cyclodextrins inclusion complex: Preparation methods, analytical techniques and food industry applications

This review offers a vision of the chemical behaviour of natural ingredients, synthetic drugs and other related compounds complexed using cyclodextrins. The review takes care of different sections related to i) the inclusion complexes formation with cyclodextrins, ii) the determination of the inclusion formation constant, iii) the most used methods to prepare host inclusion in the non-polar cavity of cyclodextrins and iv) the analytical techniques to evidence host inclusion. The review provides different literature that shows the application of cyclodextrins to improve physical, chemical, and biological characteristics of food compounds including solubility, stability and their elimination/masking. Moreover, the review also offers examples of commercial food/supplement products of cyclodextrins to indicate that cyclodextrins can be used to generate biotechnological substances with innovative properties and improve the development of food products.

The determination of Sulfobutylether β-Cyclodextrin Sodium (SBECD) by LC-MS/MS and its application in remdesivir pharmacokinetics study for pediatric patients

SBECD (Captisol®) with an average degree of substitution of 6.5 sulfobutylether functional groups (SBE = 6.5), is a solubility enhancer for remdesivir (RDV) and a major component in Veklury, which was approved by FDA for the treatment of patients with COVID-19 over 12 years old and weighing over 40 kg who require hospitalization. SBECD is cleared mainly by renal filtration, thus, potential accumulation of SBECD in the human body is a concern for patients dosed with Veklury with compromised renal function. An LC-MS/MS method was developed and validated for specific, accurate, and precise determination of SBECD concentrations in human plasma. In this method, the hexa-substituted species, SBE6, was selected for SBECD quantification, and the mass transition from its dicharged molecular ion [(M-2H)/2]^2-, Molecular (parent) Ion (Q1)/Molecular (parent) Ion (Q3) of m/z 974.7/974.7, was selected for quantitative analysis of SBECD. Captisol-G (SBE-γ-CD, SBE = 3) was chosen as the internal standard. With 25 µL of formic-acid-treated sample and with a calibration range of 10.0-1000 µg/mL, the method was validated with respect to pre-established criteria based on regulatory guidelines and was applied to determine SBECD levels in plasma samples collected from pediatric patients during RDV clinical studies.