Rigidity versus flexibility: the dilemma of understanding protein thermal stability

Destabilization of the D2 domain of Thermotoga maritima arginine binding protein induced by guanidinium thiocyanate and its counteraction by stabilizing agents

D2 is a structural and cooperative domain of Thermotoga maritima Arginine Binding Protein, that possesses a remarkable conformational stability, with a denaturation temperature of 102.6°C, at pH 7.4. The addition of potassium thiocyanate causes a significant decrease in the D2 denaturation temperature. The interactions of thiocyanate ions with D2 have been studied by means of isothermal titration calorimetry measurements and molecular dynamics simulations. It emerged that: (a) 20-30 thiocyanate ions interact with the D2 surface and are present in its first solvation shell; (b) each of them makes several contacts with protein groups, both polar and nonpolar ones. The addition of guanidinium thiocyanate causes a marked destabilization of the D2 native state, because both the ions are denaturing agents. However, on adding to the solution containing D2 and guanidinium thiocyanate a stabilizing agent, such as TMAO, sucrose or sodium sulfate, a significant increase in denaturation temperature occurs. The present results confirm that counteraction is a general phenomenon for globular proteins.

Unveiling potential PET degrading eukaryotes through in silico bioprospecting of PETases

This study addresses the environmental problem of PET plastic through in silico bioprospecting for the identification and experimental validation of novel PET degrading eukaryotes through the in silico bioprospectingI of PETases, employing a methodology that combines Hidden Markov Models (HMMs), clustering techniques, molecular docking, and dynamic simulations. A total of 424 putative PETase sequences were identified from 219 eukaryotic organisms, highlighting six sequences with low affinity energies. The Aspergillus luchuensis sequence showed the lowest Gibbs free energy and exhibited stability at different temperatures in molecular dynamics assays. Experimental validation, through a plate clearance assay and HPLC, confirmed PETase activity in three wild-type fungal strains, with A. luchuensis showing the highest efficiency. The results obtained demonstrate the effectiveness of combining computational and experimental approaches as proof of concept to discover and validate eukaryotes with PET-degrading capabilities opening new perspectives for the sustainable management of this type of waste and contributing to its environmental mitigation.

Structural and functional effects of the L84S mutant in the SARS-COV-2 ORF8 dimer based on microsecond molecular dynamics study

The L84S mutation has been observed frequently in the ORF8 protein of SARS-CoV-2, which is an accessory protein involved in various important functions such as virus propagation, pathogenesis, and evading the immune response. However, the specific effects of this mutation on the dimeric structure of ORF8 and its impacts on interactions with host components and immune responses are not well understood. In this study, we performed one microsecond molecular dynamics (MD) simulation and analyzed the dimeric behavior of the L84S and L84A mutants in comparison to the native protein. The MD simulations revealed that both mutations caused changes in the conformation of the ORF8 dimer, influenced protein folding mechanisms, and affected the overall structural stability. In particular, the 73YIDI76 motif has found to be significantly affected by the L84S mutation, leading to structural flexibility in the region connecting the C-terminal β4 and β5 strands. This flexibility might be responsible for virus immune modulation.  The free energy landscape (FEL) and principle component analysis (PCA) have also supported our investigation. Overall, the L84S and L84A mutations affect the ORF8 dimeric interfaces by reducing the frequency of protein-protein interacting residues (Arg52, Lys53, Arg98, Ile104, Arg115, Val117, Asp119, Phe120, and Ile121) in the ORF8 dimer.  Our findings provide detail insights for further research in designing structure-based therapeutics against the SARS-CoV-2.Communicated by Ramaswamy H. Sarma.

Effect of dual modifications with ultrasonication and succinylation on Cicer arietinum protein-iron complexes: Characterization, digestibility, in-vitro cellular mineral uptake and preparation of fortified smoothie

The research aimed to evaluate the effect of ultrasonication and succinylation on the functional, iron binding, physiochemical, and cellular mineral uptake efficacy of chickpea protein concentrate. Succinylation resulted in significant improvements in the water-holding capacity (WHC) (25.47 %), oil-holding capacity (OHC) (31.38 %), and solubility (5.80 %) of the chickpea protein-iron complex. Mineral bioavailability significantly increased by 4.41 %, and there was a significant increase in cellular mineral uptake (64.64 %), retention (36.68 %), and transport (27.96 %). The ferritin content of the succinylated chickpea protein-iron complex showed a substantial increase of 66.31%. Furthermore, the dual modification approach combining ultrasonication and succinylation reduced the particle size of the protein-iron complex with a substantial reduction of 83.25 %. It also resulted in a significant enhancement of 51.5 % in the SH (sulfhydryl) content and 48.92 % in the surface hydrophobicity. Mineral bioavailability and cellular mineral uptake, retention, and transport were further enhanced through dual modification. In terms of application, the addition of single and dual-modified chickpea protein-iron complex to a fruit-based smoothie demonstrated positive acceptance in sensory attributes. Overall, the combined approach of succinylation and ultrasonication to the chickpea protein-iron complex shows a promising strategy for enhancing the physiochemical and techno-functional characteristics, cellular mineral uptake, and the development of vegan food products.

Dynamic Personality of Proteins and Effect of the Molecular Environment

Protein dynamics display distinct traits that are linked to their specific biological function. However, the interplay between intrinsic dynamics and the molecular environment on protein stability remains poorly understood. In this study, we investigate, by incoherent neutron scattering, the subnanosecond time scale dynamics of three model proteins: the mesophilic lysozyme, the thermophilic thermolysin, and the intrinsically disordered β-casein. Moreover, we address the influence of water, glycerol, and glucose, which create progressively more viscous matrices around the protein surface. By comparing the protein thermal fluctuations, we find that the internal dynamics of thermolysin are less affected by the environment compared to lysozyme and β-casein. We ascribe this behavior to the protein dynamic personality, i.e., to the stiffer dynamics of the thermophilic protein that contrasts the influence of the environment. Remarkably, lysozyme and thermolysin in all molecular environments reach a critical common flexibility when approaching the calorimetric melting temperature.

Application of SUMO fusion technology for the enhancement of stability and activity of lysophospholipase from Pyrococcus abyssi

Heterologous production of proteins in Escherichia coli has raised several challenges including soluble production of target proteins, high levels of expression and purification. Fusion tags can serve as the important tools to overcome these challenges. SUMO (small ubiquitin-related modifier) is one of these tags whose fusion to native protein sequence can enhance its solubility and stability. In current research, a simple, efficient and cost-effective method is being discussed for the construction of pET28a-SUMO vector. In order to improve the stability and activity of lysophospholipase from Pyrococcus abyssi (Pa-LPL), a 6xHis-SUMO tag was fused to N-terminal of Pa-LPL by using pET28a-SUMO vector. Recombinant SUMO-fused enzyme (6 H-S-PaLPL) works optimally at 35 °C and pH 6.5 with remarkable thermostability at 35-95 °C. Thermo-inactivation kinetics of 6 H-S-PaLPL were also studied at 35-95 °C with first order rate constant (kIN) of 5.58 × 10- 2 h-1 and half-life of 12 ± 0 h at 95 °C. Km and Vmax for the hydrolysis of 4-nitrophenyl butyrate were calculated to be 2 ± 0.015 mM and 3882 ± 22.368 U/mg, respectively. 2.4-fold increase in Vmax of Pa-LPL was observed after fusion of 6xHis-SUMO tag to its N-terminal. It is the first report on the utilization of SUMO fusion tag to enhance the overall stability and activity of Pa-LPL. Fusion of 6xHis-SUMO tag not only aided in the purification process but also played a crucial role in increasing the thermostability and activity of the enzyme. SUMO-fused enzyme, thus generated, can serve as an important candidate for degumming of vegetable oils at industrial scale.

Staphylococcus aureus FtsZ and PBP4 bind to the conformationally dynamic N-terminal domain of GpsB

In the Firmicutes phylum, GpsB is a membrane associated protein that coordinates peptidoglycan synthesis with cell growth and division. Although GpsB has been studied in several bacteria, the structure, function, and interactome of Staphylococcus aureus GpsB is largely uncharacterized. To address this knowledge gap, we solved the crystal structure of the N-terminal domain of S. aureus GpsB, which adopts an atypical, asymmetric dimer, and demonstrates major conformational flexibility that can be mapped to a hinge region formed by a three-residue insertion exclusive to Staphylococci. When this three-residue insertion is excised, its thermal stability increases, and the mutant no longer produces a previously reported lethal phenotype when overexpressed in Bacillus subtilis. In S. aureus, we show that these hinge mutants are less functional and speculate that the conformational flexibility imparted by the hinge region may serve as a dynamic switch to fine-tune the function of the GpsB complex and/or to promote interaction with its various partners. Furthermore, we provide the first biochemical, biophysical, and crystallographic evidence that the N-terminal domain of GpsB binds not only PBP4, but also FtsZ, through a conserved recognition motif located on their C-termini, thus coupling peptidoglycan synthesis to cell division. Taken together, the unique structure of S. aureus GpsB and its direct interaction with FtsZ/PBP4 provide deeper insight into the central role of GpsB in S. aureus cell division.

Exploring the Antarctic aminopeptidase P from Pseudomonas sp. strain AMS3 through structural analysis and molecular dynamics simulation

Aminopeptidase P (APPro) is a crucial metalloaminopeptidase involved in amino acid cleavage from peptide N-termini, playing essential roles as versatile biocatalysts with applications ranging from pharmaceuticals to industrial processes. Despite acknowledging its potential for catalysis in lower temperatures, detailed molecular basis and biotechnological implications in cold environments are yet to be explored. Therefore, this research aims to investigate the molecular mechanisms underlying the cold-adapted characteristics of APPro from Pseudomonas sp. strain AMS3 (AMS3-APPro) through a detailed analysis of its structure and dynamics. In this study, structure analysis and molecular dynamics (MD) simulation of a predicted model of AMS3-APPro has been performed at different temperatures to assess structural flexibility and thermostability across a temperature range of 0-60 °C over 100 ns. The MD simulation results revealed that the structure were able to remain stable at low temperatures. Increased temperatures present a potential threat to the overall stability of AMS3-APPro by disrupting the intricate hydrogen bond networks crucial for maintaining structural integrity, thereby increasing the likelihood of protein unfolding. While the metal binding site at the catalytic core exhibits resilience at higher temperatures, highlighting its local structural integrity, the overall enzyme structure undergoes fluctuations and potential denaturation. This extensive structural instability surpasses the localized stability observed at the metal binding site. Consequently, these assessments offer in-depth understanding of the cold-adapted characteristics of AMS3-APPro, highlighting its capability to uphold its native conformation and stability in low-temperature environments. In summary, this research provides valuable insights into the cold-adapted features of AMS3-APPro, suggesting its efficient operation in low thermal conditions, particularly relevant for potential biotechnological applications in cold environments.Communicated by Ramaswamy H. Sarma.

Evaluating the Therapeutic Potential of Curcumin and Synthetic Derivatives: A Computational Approach to Anti-Obesity Treatments

Natural compounds such as curcumin, a polyphenolic compound derived from the rhizome of turmeric, have gathered remarkable scientific interest due to their diverse metabolic benefits including anti-obesity potential. However, curcumin faces challenges stemming from its unfavorable pharmacokinetic profile. To address this issue, synthetic curcumin derivatives aimed at enhancing the biological efficacy of curcumin have previously been developed. In silico modelling techniques have gained significant recognition in screening synthetic compounds as drug candidates. Therefore, the primary objective of this study was to assess the pharmacokinetic and pharmacodynamic characteristics of three synthetic derivatives of curcumin. This evaluation was conducted in comparison to curcumin, with a specific emphasis on examining their impact on adipogenesis, inflammation, and lipid metabolism as potential therapeutic targets of obesity mechanisms. In this study, predictive toxicity screening confirmed the safety of curcumin, with the curcumin derivatives demonstrating a safe profile based on their LD50 values. The synthetic curcumin derivative 1A8 exhibited inactivity across all selected toxicity endpoints. Furthermore, these compounds were deemed viable candidate drugs as they adhered to Lipinski's rules and exhibited favorable metabolic profiles. Molecular docking studies revealed that both curcumin and its synthetic derivatives exhibited favorable binding scores, whilst molecular dynamic simulations showed stable binding with peroxisome proliferator-activated receptor gamma (PPARγ), csyclooxygenase-2 (COX2), and fatty acid synthase (FAS) proteins. The binding free energy calculations indicated that curcumin displayed potential as a strong regulator of PPARγ (-60.2 ± 0.4 kcal/mol) and FAS (-37.9 ± 0.3 kcal/mol), whereas 1A8 demonstrated robust binding affinity with COX2 (-64.9 ± 0.2 kcal/mol). In conclusion, the results from this study suggest that the three synthetic curcumin derivatives have similar molecular interactions to curcumin with selected biological targets. However, in vitro and in vivo experimental studies are recommended to validate these findings.

ATP-dependent conformational dynamics in a photoactivated adenylate cyclase revealed by fluorescence spectroscopy and small-angle X-ray scattering

Structural insights into the photoactivated adenylate cyclases can be used to develop new ways of controlling cellular cyclic adenosine monophosphate (cAMP) levels for optogenetic and other applications. In this work, we use an integrative approach that combines biophysical and structural biology methods to provide insight on the interaction of adenosine triphosphate (ATP) with the dark-adapted state of the photoactivated adenylate cyclase from the cyanobacterium Oscillatoria acuminata (OaPAC). A moderate affinity of the nucleotide for the enzyme was calculated and the thermodynamic parameters of the interaction have been obtained. Stopped-flow fluorescence spectroscopy and small-angle solution scattering have revealed significant conformational changes in the enzyme, presumably in the adenylate cyclase (AC) domain during the allosteric mechanism of ATP binding to OaPAC with small and large-scale movements observed to the best of our knowledge for the first time in the enzyme in solution upon ATP binding. These results are in line with previously reported drastic conformational changes taking place in several class III AC domains upon nucleotide binding.

Biochemical Characterization of Laccase from Spirulina CPCC-695 and Their Role in Estrone Degradation

The addition of exogenous endocrine disrupting compounds (EDCs) like estrone, in the food chain through the aquatic system, disrupts steroid biosynthesis and metabolism by altering either the genomic or non-genomic pathway that eventually results in various diseases. Thus, bioremediation of these compounds is urgently required to prevent their addition and persistence in the environment. Enzymatic degradation has proven to be a knight in shining armour as it is safe and generates no toxic products. The multicopper oxidases (E.C. 1.10.3.2 benzenediol: oxygen oxidoreductase), laccase with the potential to degrade both phenolic and non-phenolic substrates has recently gained attention. In this study, the laccase was purified, characterized, and used to study estrone degradation. The culture filtrate (crude laccase) was concentrated and precipitated using cold-acetone and dialyzed against tris buffer (50 mM) giving a four-fold partially purified form, with 45.56% yield and 204.14 U/mg as specific activity and a single peak at 250-300 nm. The partially purified laccase was approximately 80 kDa as estimated by SDS-PAGE preferred ABTS as substrate. Both crude and partially purified laccase showed maximum activity at pH 3.0, 40 °C, and 4 mM ABTS. Kinetic constants (Km, Vmax) of crude and partially purified laccase were found to be 0.83 mM; 494.31 mM/min, and 0.58 mM; 480.54 mM/min respectively. Iron sulphate and sodium azide inhibited laccase maximally. Crude and partially purified laccase degradation efficiency was 87.55 and 91.35% respectively. Spirulina CPCC-695 laccase with efficient estrone degradation ability renders them promising candidates for EDCs bioremediation.

Multivariate evaluation of the printing process on 3D printing of rice protein

The combination of printing parameters appropriately improves the printability of 3D-printed foods. In this regard, the present study aims to evaluate the effect of 3D printing process parameters on protein food generation. Printability of a cylinder 3 cm in diameter and 1 cm in height using a protein mixture of rice water and xanthan gum with a ratio of 30:70:0.5 was evaluated in an extrusion printer with an XYZ system. A ½ fractional factorial design was used with three factors: nozzle diameter (1.2 - 2.2 mm), layer height (1.0 - 2.0 mm), and print speed (20 - 50 mm/s). Each combination of factor levels was performed in triplicate for 12 runs plus three central points. Print time (min), sample weight, change in diameter (%), change in height (%), change in volume (%), mass flow rate (mg/s), appreciation (qualitative variable), and textural and rheology characters were obtained as response variables. The linear effects of the factors and combination factors were evaluated by analysis of variance. Additionally, a principal component analysis was performed to visualize the similarity between the observations and the relationship between the variables. The results showed that the layer height and nozzle diameter affect the printing accuracy concerning surface quality, shape stability, resolution, and layer layout. The nozzle with a diameter of 1.7 mm combined with speeds between 35 and 50 mm/s allowed the effects of overextrusion to be overcome, generating a better flow of the material. Low scores in the printability variable were related to low-speed values (20 mm/s) and a high nozzle diameter (2.2 mm), which generated higher deformations in the printed protein cylinder. Additionally, some printing conditions affected the textural and rheological characteristics, which allowed inferring that the capacity of the protein mass to store and recover energy in compression processes is conditioned by the printing parameters.

A tradeoff between enterovirus A71 particle stability and cell entry

A central role of viral capsids is to protect the viral genome from the harsh extracellular environment while facilitating initiation of infection when the virus encounters a target cell. Viruses are thought to have evolved an optimal equilibrium between particle stability and efficiency of cell entry. In this study, we genetically perturb this equilibrium in a non-enveloped virus, enterovirus A71 to determine its structural basis. We isolate a single-point mutation variant with increased particle thermotolerance and decreased efficiency of cell entry. Using cryo-electron microscopy and molecular dynamics simulations, we determine that the thermostable native particles have acquired an expanded conformation that results in a significant increase in protein dynamics. Examining the intermediate states of the thermostable variant reveals a potential pathway for uncoating. We propose a sequential release of the lipid pocket factor, followed by internal VP4 and ultimately the viral RNA.

Exploring the potential of biologically active phenolic acids from marine natural products as anticancer agents targeting the epidermal growth factor receptor

The epidermal growth factor receptor (EGFR) dimerizes upon ligand bindings to the extracellular domain that initiates the downstream signaling cascades and activates intracellular kinase domain. Thus, activation of autophosphorylation through kinase domain results in metastasis, cell proliferation, and angiogenesis. The main objective of this research is to discover more promising anti-cancer lead compound against EGRF from the phenolic acids of marine natural products using in-silico approaches. Phenolic compounds reported from marine sources are reviewed from previous literatures. Furthermore, molecular docking was carried out using the online tool CB-Dock. The molecules with good docking and binding energies scores were subjected to ADME, toxicity and drug-likeness analysis. Subsequently, molecules from the docking experiments were also evaluated using the acute toxicity and MD simulation studies. Fourteen phenolic compounds from the reported literatures were reviewed based on the findings, isolation, characterized and applications. Molecular docking studies proved that the phenolic acids have good binding fitting by forming hydrogen bonds with amino acid residues at the binding site of EGFR. Chlorogenic acid, Chicoric acid and Rosmarinic acid showed the best binding energies score and forming hydrogen bonds with amino acid residues compare to the reference drug Erlotinib. Among these compounds, Rosmarinic acid showed the good pharmacokinetics profiles as well as acute toxicity profile. The MD simulation study further revealed that the lead complex is stable and could be future drug to treat the cancer disease. Furthermore, in a wet lab environment, both in-vitro and in-vivo testing will be employed to validate the existing computational results.Communicated by Ramaswamy H. Sarma.

Red edge excitation shift spectroscopy is highly sensitive to tryptophan composition

Red edge excitation shift (REES) spectroscopy relies on the unique emission profiles of fluorophore-solvent interactions to profile protein molecular dynamics. Recently, we reported the use of REES to compare the stability of 32 polymorphic IgG antibodies natively containing tryptophan reporter fluorophores. Here, we expand on this work to investigate the sensitivity of REES to variations in tryptophan content using a subset of IgG3 antibodies containing arginine to tryptophan polymorphisms. Structural analysis revealed that the additional tryptophan residues were situated in highly solvated environments. Subsequently, REES showed clear differences in fluorescence emission profiles when compared with the unmutated variants, thereby limiting direct comparison of their structural dynamics. These findings highlight the exquisite sensitivity of REES to minor variations in protein structure and tryptophan composition.

Statistical Improvement of rGILCC 1 and rPOXA 1B Laccases Activity Assay Conditions Supported by Molecular Dynamics

Laccases (E.C. 1.10.3.2) are glycoproteins widely distributed in nature. Their structural conformation includes three copper sites in their catalytic center, which are responsible for facilitating substrate oxidation, leading to the generation of H2O instead of H2O2. The measurement of laccase activity (UL-1) results may vary depending on the type of laccase, buffer, redox mediators, and substrates employed. The aim was to select the best conditions for rGILCC 1 and rPOXA 1B laccases activity assay. After sequential statistical assays, the molecular dynamics proved to support this process, and we aimed to accumulate valuable insights into the potential application of these enzymes for the degradation of novel substrates with negative environmental implications. Citrate buffer treatment T2 (CB T2) (pH 3.0 ± 0.2; λ420nm, 2 mM ABTS) had the most favorable results, with 7.315 ± 0.131 UL-1 for rGILCC 1 and 5291.665 ± 45.83 UL-1 for rPOXA 1B. The use of citrate buffer increased the enzyme affinity for ABTS since lower Km values occurred for both enzymes (1.49 × 10-2 mM for rGILCC 1 and 3.72 × 10-2 mM for rPOXA 1B) compared to those obtained in acetate buffer (5.36 × 10-2 mM for rGILCC 1 and 1.72 mM for rPOXA 1B). The molecular dynamics of GILCC 1-ABTS and POXA 1B-ABTS showed stable behavior, with root mean square deviation (RMSD) values not exceeding 2.0 Å. Enzyme activities (rGILCC 1 and rPOXA 1B) and 3D model-ABTS interactions (GILCC 1-ABTS and POXA 1B-ABTS) were under the strong influence of pH, wavelength, ions, and ABTS concentration, supported by computational studies identifying the stabilizing residues and interactions. Integration of the experimental and computational approaches yielded a comprehensive understanding of enzyme-substrate interactions, offering potential applications in environmental substrate treatments.

Homologous Pairs of Low and High Temperature Originating Proteins Spanning the Known Prokaryotic Universe

Stability of proteins at high temperature has been a topic of interest for many years, as this attribute is favourable for applications ranging from therapeutics to industrial chemical manufacturing. Our current understanding and methods for designing high-temperature stability into target proteins are inadequate. To drive innovation in this space, we have curated a large dataset, learn2thermDB, of protein-temperature examples, totalling 24 million instances, and paired proteins across temperatures based on homology, yielding 69 million protein pairs - orders of magnitude larger than the current largest. This important step of pairing allows for study of high-temperature stability in a sequence-dependent manner in the big data era. The data pipeline is parameterized and open, allowing it to be tuned by downstream users. We further show that the data contains signal for deep learning. This data offers a new doorway towards thermal stability design models.

A green and efficient two-step enzymatic esterification-hydrolysis method for enrichment of c9,t11-CLA isomer based on a three-liquid-phase system

A novel two-step enzymatic esterification-hydrolysis method that generates high-purity conjugated linoleic acid (CLA) isomers was developed. CLA was first partially purified by enzymatic esterification and then further purified by efficient, selective enzymatic hydrolysis in a three-liquid-phase system (TLPS). Compared with traditional two-step selective enzymatic esterification, this novel method produced highly pure cis-9, trans-11 (c9,t11)-CLA (96%) with high conversion (approx. 36%) and avoided complicated rehydrolysis and reesterification steps. The catalytic efficiency and selectivity of CLA ester enzymatic hydrolysis was greatly improved with TLPSs, as high-speed stirring provided a larger interface area for the reaction and product inhibition was effectively reduced by extraction of the product into other phases. Furthermore, the enzyme-enriched phase (liquid immobilization support) was effectively and economically reused more than 8 times because it contained more than 90% of the concentrated enzyme. Therefore, this novel enzymatic esterification-hydrolysis method can be considered ideal to produce high-purity fatty acid monomers.

Correlation between chemical denaturation and the unfolding energetics of Acanthamoeba actophorin

The actin filament network is in part remodeled by the action of a family of filament severing proteins that are responsible for modulating the ratio between monomeric and filamentous actin. Recent work on the protein actophorin from the amoeba Acanthamoeba castellani identified a series of site-directed mutations that increase the thermal stability of the protein by 22°C. Here, we expand this observation by showing that the mutant protein is also significantly stable to both equilibrium and kinetic chemical denaturation, and employ computer simulations to account for the increase in thermal or chemical stability through an accounting of atomic-level interactions. Specifically, the potential of mean force (PMF) can be obtained from steered molecular dynamics (SMD) simulations in which a protein is unfolded. However, SMD can be inefficient for large proteins as they require large solvent boxes, and computationally expensive as they require increasingly many SMD trajectories to converge the PMF. Adaptive steered molecular dynamics (ASMD) overcomes the second of these limitations by steering the particle in stages, which allows for convergence of the PMF using fewer trajectories compared with SMD. Use of the telescoping water scheme within ASMD partially overcomes the first of these limitations by reducing the number of waters at each stage to only those needed to solvate the structure within a given stage. In the PMFs obtained from ASMD, the work of unfolding Acto-2 was found to be higher than the Acto-WT by approximately 120 kCal/mol and reflects the increased stability seen in the chemical denaturation experiments. The evolution of the average number of hydrogen bonds and number of salt bridges during the pulling process provides a mechanistic view of the structural changes of the actophorin protein as it is unfolded, and how it is affected by the mutation in concert with the energetics reported through the PMF.

Thermal Ring-Based Heat Switches in Hyperthermophilic Class II Bacterial Fructose Aldolase

Both thermophilic and hyperthermophilic enzymes in bacterial and archaeal species are activated above a specific temperature threshold but inactivated at another higher temperature. However, the underlying structural basis for these two heat switches is still unresolved. Here, graph theory was used to test if the temperature-dependent noncovalent interactions and metal bridges as identified in a series of crystal structures of the class II bacterial fructose 1,6-bisphosphate aldolase homodimer or homotetramer with or without natural substrates and products bound could form systematic fluidic grid-like mesh networks with topological grids as thermal rings to regulate their structural thermostability and functional thermoactivity. The results indicated that the second biggest grid in the Thermus aquaticus fructose 1,6-diphosphate aldolase dimer may control the specific temperature threshold to release the swapping flexible active sites at the dimeric interface for heat-evoked activation. Meanwhile, the third biggest grid may serve as a necessary structural motif against heat inactivation. Finally, the smallest grid may act as a stiff thermostable anchor. Its dissociation at the maximal melting temperature threshold may stop the catalytic activity. Taken as a whole, this computational study may render the structural motifs for the optimal growth temperature and the extreme heat stability of hyperthermophiles.

Three amino acid substitutions contributing to thermostability of phosphoglucose isomerase in the Glanville fritillary butterfly

Temperature is one of the most important environmental factors that affect organisms, especially ectotherms, due to its effects on protein stability. Understanding the general rules that govern thermostability changes in proteins to adapt high-temperature environments is crucial. Here, we report the amino acid substitutions of phosphoglucose isomerase (PGI) related to thermostability in the Glanville fritillary butterfly (Melitaea cinxia, Lepidoptera: Nymphalidae). The PGI encoded by the most common allele in M. cinxia in the Chinese population (G3-PGI), which is more thermal tolerant, is more stable under heat stress than that in the Finnish population (D1-PGI). There are 5 amino acid substitutions between G3-PGI and D1-PGI. Site-directed mutagenesis revealed that the combination of amino acid substitutions of H35Q, M49T, and I64V may increase PGI thermostability. These substitutions alter the 3D structure to increase the interaction between 2 monomers of PGI. Through molecular dynamics simulations, it was found that the amino acid at site 421 is more stable in G3-PGI, confining the motion of the α-helix 420-441 and stabilizing the interaction between 2 PGI monomers. The strategy for high-temperature adaptation through these 3 amino acid substitutions is also adopted by other butterfly species (Boloria eunomia, Aglais urticae, Colias erate, and Polycaena lua) concurrent with M. cinxia in the Tianshan Mountains of China, i.e., convergent evolution in butterflies.

Molecular Dynamics Simulations of HPr Proteins from a Thermophilic and a Mesophilic Organism: A Comparative Thermal Study

The histidine-containing phosphocarrier (HPr) is a monomeric protein conserved in Gram-positive bacteria, which may be of mesophilic or thermophilic nature. In particular, the HPr protein from the thermophilic organism B. stearothermophilus is a good model system for thermostability studies, since experimental data, such as crystal structure and thermal stability curves, are available. However, its unfolding mechanism at higher temperatures is yet unclear at a molecular level. Therefore, in this work, we researched the thermal stability of this protein using molecular dynamics simulations, subjecting it to five different temperatures during a time span of 1 μs. The analyses of the structural parameters and molecular interactions were compared with those of the mesophilic homologue HPr protein from B. subtilis. Each simulation was run in triplicate using identical conditions for both proteins. The results showed that the two proteins lose stability as the temperature increases, but the mesophilic structure is more affected. We found that the salt bridge network formed by the triad of Glu3-Lys62-Glu36 residues and the salt bridge made up of Asp79-Lys83 ion pair are key factors to keep stable the thermophilic protein, maintaining the hydrophobic core protected and the structure packed. In addition, these molecular interactions neutralize the negative surface charge, acting as "natural molecular staples".

Model of ligand-triggered information transmission in G-protein coupled receptor complexes

We present a model for the effects of ligands on information transmission in G-Protein Coupled Receptor (GPCR) complexes. The model is built ab initio entirely on principles of statistical mechanics and tenets of information transmission theory and was validated in part using agonist-induced effector activity and signaling bias for the angiotensin- and adrenergic-mediated signaling pathways, with in vitro observations of phosphorylation sites on the C tail of the GPCR complex, and single-cell information-transmission experiments. The model extends traditional kinetic models that form the basis for many existing models of GPCR signaling. It is based on maximizing the rates of entropy production and information transmission through the GPCR complex. The model predicts that (1) phosphatase-catalyzed reactions, as opposed to kinase-catalyzed reactions, on the C-tail and internal loops of the GPCR are responsible for controlling the signaling activity, (2) signaling favors the statistical balance of the number of switches in the ON state and the number in the OFF state, and (3) biased-signaling response depends discontinuously on ligand concentration.

Stimuli-Induced Subconformation Transformation of the PSI-LHCI Protein at Single-Molecule Resolution

Photosynthesis is a very important process for the current biosphere which can maintain such a subtle and stable circulatory ecosystem on earth through the transformation of energy and substance. Even though been widely studied in various aspects, the physiological activities, such as intrinsic structural vibration and self-regulation process to stress of photosynthetic proteins, are still not in-depth resolved in real-time. Herein, utilizing silicon nanowire biosensors with ultrasensitive temporal and spatial resolution, real-time responses of a single photosystem I-light harvesting complex I (PSI-LHCI) supercomplex of Pisum sativum to various conditions, including gradient variations in temperature, illumination, and electric field, are recorded. Under different temperatures, there is a bi-state switch process associated with the intrinsic thermal vibration behavior. When the variations of illumination and the bias voltage are applied, two additional shoulder states, probably derived from the self-conformational adjustment, are observed. Based on real-time monitoring of the dynamic processes of the PSI-LHCI supercomplex under various conditions, it is successively testified to promising nanotechnology for protein profiling and biological functional integration in photosynthesis studies.

Modeling the role of charged residues in thermophilic proteins by rotamer and dynamic cross correlation analysis

Discerning the determinants of protein thermostability is very important both from the theoretical and applied perspective. Different lines of evidence seem to indicate that a dynamical network of salt bridges/charged residues plays a fundamental role in the thermostability of enzymes. In this work, we applied measures of dynamic variance, like the Gini coefficients, Kullback-Leibler (KL) divergence and dynamic cross correlation (DCC) coefficients to compare the behavior of 3 pairs of homologous proteins from the thermophilic bacterium Thermus thermophilus and mesophilic Escherichia coli. Molecular dynamic (MD) simulations of these proteins were performed at 303 K and 363 K. In the characterization of their side chain rotamer distributions, the corresponding Gini coefficients and KL-divergence both revealed significant correlations with temperature. Similarly, a DCC analysis revealed a higher trend to de-correlate the movement of charged residues at higher temperatures in the thermophilic proteins, when compared with their mesophilic homologues. These results highlight the importance of dynamic electrostatic network interactions for the thermostability of enzymes.

Constant domain polymorphisms influence monoclonal antibody stability and dynamics

The constant regions of clinical monoclonal antibodies are derived from a select number of allotypes found in IgG subclasses. Despite a long-term acknowledgment that this diversity may impact both antibody function and developability, there is a lack of data on the stability of variants carrying these mutations. Here, we generated a panel of IgG1, IgG2, and IgG3 antibodies with 32 unique constant region alleles and performed a systematic comparison of stability using red edge excitation shift (REES). This technique exploits the fluorescent properties of tryptophan residues to measure antibody structural dynamics which predict flexibility and the propensity to unfold. Our REES measurements revealed broad stability differences between subclasses with IgG3 possessing the poorest overall stability. Further interrogation of differences between variants within each subclass enabled the high-resolution profiling of individual allotype stabilities. Crucially, these observed differences were not found to be linked to N297-linked glycan heterogeneity. Our work demonstrates diverse stabilities (and dynamics) for a range of naturally occurring constant domain alleles and the utility of REES as a method for rapid and sensitive antibody stability profiling, requiring only laboratory spectrophotometry equipment.

A protein engineering approach toward understanding FKBP51 conformational dynamics and mechanisms of ligand binding

Most proteins are flexible molecules that coexist in an ensemble of several conformations. Point mutations in the amino acid sequence of a protein can trigger structural changes that drive the protein population to a conformation distinct from the native state. Here, we report a protein engineering approach to better understand protein dynamics and ligand binding of the FK506-binding protein 51 (FKBP51), a prospective target for stress-related diseases, metabolic disorders, some types of cancers and chronic pain. By randomizing selected regions of its ligand-binding domain and sorting yeast display libraries expressing these variants, mutants with high affinity to conformation-specific FKBP51 selective ligands were identified. These improved mutants are valuable tools for the discovery of novel selective ligands that preferentially and specifically bind the FKBP51 active site in its open conformation state. Moreover, they will help us understand the conformational dynamics and ligand binding mechanics of the FKBP51 binding pocket.

Battling BTK mutants with noncovalent inhibitors that overcome Cys481 and Thr474 mutations in Waldenström macroglobulinemia therapy: structural mechanistic insights on the role of fenebrutinib

Recently, the non-covalent Bruton tyrosine kinase (BTK) inhibitor fenebrutinib was presented as a therapeutic option with strong inhibitory efficacy against a single (C481S) and double (T474S/C481S) BTK variant in the treatment of Waldenström macroglobulinemia (WM). However, the molecular events surrounding its inhibition mechanism towards this variant remain unresolved. Herein, we employed in silico methods such as molecular dynamic simulation coupled with binding free energy estimations to explore the mechanistic activity of the fenebrutinib on (C481S) and (T474S/C481S) BTK variant, at a molecular level. Our investigations reveal that amino acid arginine contributed immensely to the total binding energy, this establishing the cruciality of amino acid residues, Arg132 and Arg156 in (C481S) and Arg99, Arg137, and Arg132 in (T474S/C481S) in the binding of fenebrutinib towards both BTK variants. The structural orientations of fenebrutinib within the respective hydrophobic pockets allowed favorable interactions with binding site residues, accounting for its superior binding affinity by 24.5% and relative high hydrogen bond formation towards (T474S/C481S) when compared with (C481S) BTK variants. Structurally, fenebrutinib impacted the stability, flexibility, and solvent accessible surface area of both BTK variants, characterized by various alterations observed in the bound and unbound structures, which proved enough to disrupt their biological function. Findings from this study, therefore, provide insights into the inhibitory mechanism of fenebrutinib at the atomistic level and reveal its high selectivity towards BTK variants. These insights could be key in designing and developing BTK mutants' inhibitors to treat Waldenström macroglobulinemia (WM).

Elucidating the Structural Impacts of Protein InDels

The effects of amino acid insertions and deletions (InDels) remain a rather under-explored area of structural biology. These variations oftentimes are the cause of numerous disease phenotypes. In spite of this, research to study InDels and their structural significance remains limited, primarily due to a lack of experimental information and computational methods. In this work, we fill this gap by modeling InDels computationally; we investigate the rigidity differences between the wildtype and a mutant variant with one or more InDels. Further, we compare how structural effects due to InDels differ from the effects of amino acid substitutions, which are another type of amino acid mutation. We finish by performing a correlation analysis between our rigidity-based metrics and wet lab data for their ability to infer the effects of InDels on protein fitness.

Molecular simulations explain the exceptional thermal stability, solvent tolerance and solubility of protein-polymer surfactant bioconjugates in ionic liquids

Proteins complexed electrostatically with polymer surfactants constitute a viscous liquid by themselves, called the solvent-free protein liquid (SFPL). A solution of SFPL in a room temperature ionic liquid (PS-IL) offers the protein hyperthermal stability, higher solubility and greater IL tolerance. A generic understanding of these protein-polymer systems is obtained herein through extensive atomistic molecular dynamics simulations of three different enzymes (lipase A, lysozyme and myoglobin) under various conditions. Along with increased intra-protein hydrogen bonding, the surfactant coating around the proteins imparts greater thermal stability, and also aids in screening protein-IL interactions, endowing them IL tolerance. The reduced surface polarity of the protein-polymer bioconjugate and hydrogen bonding between the ethylene glycol groups of the surfactant and the IL cation contribute to the facile solvation of the protein in its PS-IL form. The results presented here rationalize several experimental observations and will aid in the improved design of such hybrid materials for sustainable catalysis.

Conformation-Stabilized Amorphous Nanocoating for Rational Design of Long-Term Thermostable Viral Vaccines

Despite the great potency of vaccines to combat infectious diseases, their global use is hindered by a lack of thermostability, which leads to a constant need for cold-chain storage. Here, aiming at long-term thermostability and eliminating cold-chain requirements of bioactive vaccines, we propose that efforts should focus on tailoring the conformational stability of vaccines. Accordingly, we design a nanocoating composed of histidine (His)-coordinated amorphous Zn and 2-methylimidazolate complex (His-aZn-mIM) on single nanoparticles of viral vaccines to introduce intramolecular coordinated linkage between viruses and the nanocoatings. The coordinated nanocoating enhances the rigidity of proteins and preserves the vaccine's activity. Importantly, integrating His into the original Zn-N coordinative environment symbiotically reinforces its tolerance to biological and hydrothermal solutions, resulting in the augmented thermostability following the Hofmeister effect. Thus, even after storage of His-aZn-mIM encapsulated Human adenovirus type 5 (Ad5@His-aZn-mIM) at 25 °C for 90 d, the potency loss of the coated Ad5 is less than 10%, while the native Ad5 becomes 100% ineffective within one month. Such a nanocoating gains thermostability by forming an ultrastable hydration shell, which prevents viral proteins from unfolding under the attack of hydration ions, providing a conformational stabilizer upon heat exposure. Our findings represent an easy-access biomimetic platform to address the long-term vaccine storage without the requirement of a cold chain.

Microsecond MD Simulations of the Plexin-B1 RBD: N-H Probability Density as Descriptor of Structural Dynamics, Dimerization-Related Conformational Entropy, and Transient Dimer Asymmetry

Amide-bond equilibrium probability density, P_eq = exp(-u) (u, local potential), and associated conformational entropy, S_k = -∫P_eq (ln P_eq) dΩ ─ln ∫dΩ, are derived for the Rho GTPase binding domain of Plexin-B1 (RBD) as monomer and dimer from 1 μs MD simulations. The objective is to elucidate the effect of dimerization on the dynamic structure of the RBD. Dispersed (peaked) P_eq functions indicate "flexibility" ("rigidity"; the respective concepts are used below in this context). The L1 and L3 loops are throughout highly flexible, the L2 loop and the secondary structure elements are generally rigid, and the L4 loop is flexible in the monomer and rigid in the dimer. Overall, many residues are more flexible in the dimer. These features, and their implications, are discussed. Unexpectedly, we find that monomer unit 1 of the dimer (in short, d1) is unusually flexible, whereas monomer unit 2 (in short, d2) is as rigid as the RBD monomer. This is revealed due to their engagement in slow-to-intermediate conformational exchange detected previously by ¹⁵N relaxation experiments. Such motions occur with rates on the order of 10³-10⁴ s^-1; hence, they cannot be completely sampled over the course of 1 μs simulation. However, the extent to which rigid d2 is affected is small enough to enable physically relevant analysis. The entropy difference between d2 and the monomer yields an entropic contribution of -7 ± 0.7 kJ/mol to the free energy of RBD dimerization. In previous work aimed at similar objectives we used 50-100 ns MD simulations. Those results and the present result differ considerably. In summary, bond-vector P_eq functions derived directly from long MD simulations are useful descriptors of protein structural dynamics and provide accurate conformational entropy. Within the scope of slow conformational exchange, they can be useful, even in the presence of incomplete sampling.

Enhancement of the degradation capacity of IsPETase for PET plastic degradation by protein engineering

The enormous waste of polyethylene terephthalate (PET) plastic has a great negative impact on the ecological environment because of its chemical inertia. To reduce the environmental threat posed by PET plastic, researchers gradually concentrate on the biodegradation of PET plastic. In this study, DuraPETase^{N233C/S282C/H214S/S245R} (DuraPETase-4M) was designed through protein engineering, which can be used to improve the efficiency of PET plastic biodegradation. Based on the DuraPETase, a pair of disulfide bonds (N233C/S282C) was added to improve the thermal stability. Meanwhile, the key region flexibility adjustment (H214S) was proposed to enhance the biodegradation capacity of PET plastic. Additionally, protein surface electrostatic charge optimization (S245R) was adopted to improve the binding ability between enzyme and PET plastic. Based on molecular dynamic simulations (MDs), the rationality of the design was further verified. This study provides a strategy for obtaining high-efficiency PET degradation mutants and a new possibility of environmentally friendly plastic degradation.

Evaluation of immune evasion in SARS-CoV-2 Delta and Omicron variants

Emerging SARS-CoV-2 variants with higher transmissibility and immune escape remain a persistent threat across the globe. This is evident from the recent outbreaks of the Delta (B.1.617.2) and Omicron variants. These variants have originated from different continents and spread across the globe. In this study, we explored the genomic and structural basis of these variants for their lineage defining mutations of the spike protein through computational analysis, protein modeling, and molecular dynamic (MD) simulations. We further experimentally validated the importance of these deletion mutants for their immune escape using a pseudovirus-based neutralization assay, and an antibody (4A8) that binds directly to the spike protein's NTD. Delta variant with the deletion and mutations in the NTD revealed a better rigidity and reduced flexibility as compared to the wild-type spike protein (Wuhan isolate). Furthermore, computational studies of 4A8 monoclonal antibody (mAb) revealed a reduced binding of Delta variant compared to the wild-type strain. Similarly, the MD simulation data and virus neutralization assays revealed that the Omicron also exhibits immune escape, as antigenic beta-sheets appear to be disrupted. The results of the present study demonstrate the higher possibility of immune escape and thereby achieved better fitness advantages by the Delta and Omicron variants, which warrants further demonstrations through experimental evidences. Our study, based on in-silico computational modelling, simulations, and pseudovirus-based neutralization assay, highlighted and identified the probable mechanism through which the Delta and Omicron variants are more pathogenically evolved with higher transmissibility as compared to the wild-type strain.

Modulation of global stability, ligand binding and catalytic properties of trypsin by anions

Specific salts effect is well-known on stability and solubility of proteins, however, relatively limited knowledge is known regarding the effect on catalytic properties of enzymes. Here, we examined the effect of four sodium anions on thermal stability and catalytic properties of trypsin and binding of the fluorescent probe, p-aminobenzamidine (PAB), to the enzyme. We show that the specific anions effect on trypsin properties agrees with the localization of the anions in the Hofmeister series. Thermal stability of trypsin, T_m, the affinity of the fluorescent probe to the binding site, K_d, and the rate constant, k_cat, of trypsin-catalyzed hydrolysis of the substrate N-benzoyl-L-arginine ethyl ester (BAEE) increase with increasing kosmotropic character of anions in the order: perchlorate<bromide<chloride<sulfate, while the value of Michaelis constant, K_M, decreases. Correlations between the values of T_m, K_d for PAB, k_cat, and K_M for BAEE in the presence of 1 M studied salts suggest interrelation among these parameters of the enzyme. Global stabilization as well as increased rigidity of trypsin is accompanied by strengthening of interaction with fluorescent probe PAB and in accordance with decreasing values of K_M for the substrate BAEE. Strong correlations between parameters characterizing the trypsin properties with the charge densities of anions clearly indicate direct electrostatic interaction as a basis of the specific anion effect on the conformational and functional properties of the enzyme.

Different Effects of Salt Bridges near the Active Site of Cold-Adapted Proteus mirabilis Lipase on Thermal and Organic Solvent Stabilities

Organic solvent-tolerant (OST) enzymes have been discovered in psychrophiles. Cold-adapted OST enzymes exhibit increased conformational flexibility in polar organic solvents resulting from their intrinsically flexible structures. Proteus mirabilis lipase (PML), a cold-adapted OST lipase, was used to assess the contribution of salt bridges near the active site involving two arginine residues (R237 and R241) on the helix η1 and an aspartate residue (D248) on the connecting loop to the thermal and organic solvent stabilities of PML. Alanine substitutions for the ion pairs (R237A, R241A, D248A, and R237A/D248A) increased the conformational flexibility of PML mutants compared to that of the wild-type PML in an aqueous buffer. The PML mutants became more susceptible to denaturation after increasing the dimethyl sulfoxide or methanol concentration than after a temperature increase. Methanol was more detrimental to the structural stability of PML compared to dimethyl sulfoxide. These results suggest that direct interactions of dimethyl sulfoxide and methanol with the residues near the active site can have a destructive effect on the structure of PML compared with the global effect of heat on the protein structure. This study provides insight into the conformational changes within an OST enzyme with different effects on its thermal and organic solvent stabilities.

Structure and Function of Redox-Sensitive Superfolder Green Fluorescent Protein Variant

Aims: Genetically encoded green fluorescent protein (GFP)-based redox biosensors are widely used to monitor specific and dynamic redox processes in living cells. Over the last few years, various biosensors for a variety of applications were engineered and enhanced to match the organism and cellular environments, which should be investigated. In this context, the unicellular intraerythrocytic parasite Plasmodium, the causative agent of malaria, represents a challenge, as the small size of the organism results in weak fluorescence signals that complicate precise measurements, especially for cell compartment-specific observations. To address this, we have functionally and structurally characterized an enhanced redox biosensor superfolder roGFP2 (sfroGFP2). Results: SfroGFP2 retains roGFP2-like behavior, yet with improved fluorescence intensity (FI) in cellulo. SfroGFP2-based redox biosensors are pH insensitive in a physiological pH range and show midpoint potentials comparable with roGFP2-based redox biosensors. Using crystallography and rigidity theory, we identified the superfolding mutations as being responsible for improved structural stability of the biosensor in a redox-sensitive environment, thus explaining the improved FI in cellulo. Innovation: This work provides insight into the structure and function of GFP-based redox biosensors. It describes an improved redox biosensor (sfroGFP2) suitable for measuring oxidizing effects within small cells where applicability of other redox sensor variants is limited. Conclusion: Improved structural stability of sfroGFP2 gives rise to increased FI in cellulo. Fusion to hGrx1 (human glutaredoxin-1) provides the hitherto most suitable biosensor for measuring oxidizing effects in Plasmodium. This sensor is of major interest for studying glutathione redox changes in small cells, as well as subcellular compartments in general. Antioxid. Redox Signal. 37, 1-18.

Repurposing antiviral phytochemicals from the leaf extracts of Spondias mombin (Linn) towards the identification of potential SARSCOV-2 inhibitors

Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2), a pneumonia-like disease with a pattern of acute respiratory symptoms, currently remains a significant public health concern causing tremendous human suffering. Although several approved vaccines exist, vaccine hesitancy, limited vaccine availability, high rate of viral mutation, and the absence of approved drugs account for the persistence of SARS-CoV-2 infections. The investigation of possibly repurposing of phytochemical compounds as therapeutic alternatives has gained momentum due to their reported affordability and minimal toxicity. This study investigated anti-viral phytochemical compounds from ethanolic leaf extracts of Spondias mombin L as potential inhibitor candidates against SARS-CoV-2. We identified Geraniin and 2-O-Caffeoyl-(+)-allohydroxycitric acid as potential SARS-CoV-2 inhibitor candidates targeting the SARS-CoV-2 RNA-dependent polymerase receptor-binding domain (RBD) of SARS-CoV-2 viral S-protein and the 3C-like main protease (3CLpro). Geraniin exhibited binding free energy (ΔGbind) of - 25.87 kcal/mol and - 21.74 kcal/mol towards SARS-CoV-2 RNA-dependent polymerase and receptor-binding domain (RBD) of SARS-CoV-2 viral S-protein respectively, whereas 2-O-Caffeoyl-(+)-allohydroxycitric acid exhibited a ΔGbind of - 32 kcal/mol towards 3CLpro. Molecular Dynamics simulations indicated a possible interference to the functioning of SARS-CoV-2 targets by the two identified inhibitors. However, further in vitro and in vivo evaluation of these potential SARS-CoV-2 therapeutic inhibitor candidates is needed.

Unravelling the Structural Mechanism of Action of 5-methyl-5-[4-(4-oxo-3H-quinazolin-2-yl)phenyl]imidazolidine-2,4-dione in Dual-Targeting Tankyrase 1 and 2: A Novel Avenue in Cancer Therapy

Tankyrase (TNKS) belonging to the poly(ADPribose) polymerase family, are known for their multi-functioning capabilities, and play an essential role in the Wnt β-catenin pathway and various other cellular processes. Although showing inhibitory potential at a nanomolar level, the structural dual-inhibitory mechanism of the novel TNKS inhibitor, 5-methyl-5-[4-(4-oxo-3H-quinazolin-2-yl)phenyl]imidazolidine-2,4-dione, remains unexplored. By employing advanced molecular modeling, this study provides these insights. Results of sequence alignments of binding site residues identified conserved residues; GLY1185 and ILE1224 in TNKS-1 and PHE1035 and PRO1034 in TNKS-2 as crucial mediators of the dual binding mechanism of 5-methyl-5-[4-(4-oxo-3H-quinazolin-2-yl)phenyl]imidazolidine-2,4-dione, corroborated by high per-residue energy contributions and consistent high-affinity interactions of these residues. Estimation of the binding free energy of 5-methyl-5-[4-(4-oxo-3H-quinazolin-2-yl)phenyl]imidazolidine-2,4-dione showed estimated total energy of -43.88 kcal/mol and -30.79 kcal/mol towards TNKS-1 and 2, respectively, indicating favorable analogous dual binding as previously reported. Assessment of the conformational dynamics of TNKS-1 and 2 upon the binding of 5-methyl-5-[4-(4-oxo-3H-quinazolin-2-yl)phenyl]imidazolidine-2,4-dione revealed similar structural changes characterized by increased flexibility and solvent assessible surface area of the residues inferring an analogous structural binding mechanism. Insights from this study show that peculiar, conserved residues are the driving force behind the dual inhibitory mechanism of 5-methyl-5-[4-(4-oxo-3H-quinazolin-2-yl)phenyl]imidazolidine-2,4-dione and could aid in the design of novel dual inhibitors of TNKS-1 and 2 with improved therapeutic properties.

Industrial Biotechnology Based on Enzymes From Extreme Environments

Biocatalysis is crucial for a green, sustainable, biobased economy, and this has driven major advances in biotechnology and biocatalysis over the past 2 decades. There are numerous benefits to biocatalysis, including increased selectivity and specificity, reduced operating costs and lower toxicity, all of which result in lower environmental impact of industrial processes. Most enzymes available commercially are active and stable under a narrow range of conditions, and quickly lose activity at extremes of ion concentration, temperature, pH, pressure, and solvent concentrations. Extremophilic microorganisms thrive under extreme conditions and produce robust enzymes with higher activity and stability under unconventional circumstances. The number of extremophilic enzymes, or extremozymes, currently available are insufficient to meet growing industrial demand. This is in part due to difficulty in cultivation of extremophiles in a laboratory setting. This review will present an overview of extremozymes and their biotechnological applications. Culture-independent and genomic-based methods for study of extremozymes will be presented.

Insights on Rigidity and Flexibility at the Global and Local Levels of Protein Structures and Their Roles in Homologous Psychrophilic, Mesophilic, and Thermophilic Proteins: A Computational Study

The rigidity and flexibility of homologous psychrophilic (P), mesophilic (M), and thermophilic (T) proteins have been investigated at the global and local levels in terms of "packing factors" and "atomic fluctuations" obtained from B-factors. For comparison of atomic fluctuations, correction of errors by considering errors in B-factors from all sources in a consolidated manner and conversion of the fluctuations to the same temperature have been suggested and validated. The results indicate no differences in the global values like the average packing factor among the three classes of protein homologues, but at local levels there are differences. A comparison of homologous protein triplets show that the average atomic fluctuations at a given temperature mainly obey the order P > M > T. Packing factors and the atomic fluctuations are anti-correlated, suggesting that altering the rigidity of the active site might be a potential strategy to make tailor-made psychrophilic or thermophilic proteins from their mesophilic homologues. The computer codes developed and used in this work are available at the link https://github.com/Munna-Sarkar/proteins-rigidity-flexibility.git.

Structure and activity of a thermally stable mutant of Acanthamoeba actophorin

Actophorin, which was recently tested for crystallization under microgravity on the International Space Station, was subjected to mutagenesis to identify a construct with improved biophysical properties that were expected to improve the extent of diffraction. First, 20 mutations, including one C-terminal deletion of three residues, were introduced individually into actophorin, resulting in modest increases in thermal stability of between +0.5°C and +2.2°C. All but two of the stabilizing mutants increased both the rates of severing F-actin filaments and of spontaneous polymerization of pyrenyl G-actin in vitro. When the individual mutations were combined into a single actophorin variant, Acto-2, the overall thermal stability was 22°C higher than that of wild-type actophorin. When an inactivating S2P mutation in Acto-2 was restored, Acto-2/P2S was more stable by 20°C but was notably more active than the wild-type protein. The inactivating S2P mutation reaffirms the importance that Ser2 plays in the F-actin-severing reaction. The crystal structure of Acto-2 was solved to 1.7 Å resolution in a monoclinic space group, a first for actophorin. Surprisingly, despite the increase in thermal stability, the extended β-turn region, which is intimately involved in interactions with F-actin, is disordered in one copy of Acto-2 in the asymmetric unit. These observations emphasize the complex interplay among protein thermal stability, function and dynamics.

Protein folding stabilities are a major determinant of oxidation rates for buried methionine residues

The oxidation of protein-bound methionines to form methionine sulfoxides has a broad range of biological ramifications, making it important to delineate factors that influence methionine oxidation rates within a given protein. This is especially important for biopharmaceuticals, where oxidation can lead to deactivation and degradation. Previously, neighboring residue effects and solvent accessibility have been shown to impact the susceptibility of methionine residues to oxidation. In this study, we provide proteome-wide evidence that oxidation rates of buried methionine residues are also strongly influenced by the thermodynamic folding stability of proteins. We surveyed the Escherichia coli proteome using several proteomic methodologies and globally measured oxidation rates of methionine residues in the presence and absence of tertiary structure, as well as the folding stabilities of methionine-containing domains. These data indicated that buried methionines have a wide range of protection factors against oxidation that correlate strongly with folding stabilities. Consistent with this, we show that in comparison to E. coli, the proteome of the thermophile Thermus thermophilus is significantly more stable and thus more resistant to methionine oxidation. To demonstrate the utility of this correlation, we used native methionine oxidation rates to survey the folding stabilities of E. coli and T. thermophilus proteomes at various temperatures and propose a model that relates the temperature dependence of the folding stabilities of these two species to their optimal growth temperatures. Overall, these results indicate that oxidation rates of buried methionines from the native state of proteins can be used as a metric of folding stability.

Conjugated Dienones from Differently Substituted Cinnamaldehyde as Highly Potent Monoamine Oxidase-B Inhibitors: Synthesis, Biochemistry, and Computational Chemistry

Fifteen multiconjugated dienones (MK1-MK15) were synthesized and evaluated to determine their inhibitory activities against monoamine oxidases (MAOs) A and B. All derivatives were found to be potent and highly selective MAO-B inhibitors. Compound MK6, with an IC₅₀ value of 2.82 nM, most effectively inhibited MAO-B, like MK12 (IC₅₀ = 3.22 nM), followed by MK5, MK13, and MK14 (IC₅₀ = 4.02, 4.24, and 4.89 nM, respectively). The selectivity index values of MK6 and MK12 for MAO-B over MAO-A were 7361.5 and 1780.5, respectively. Compounds MK6 and MK12 were competitive reversible inhibitors of MAO-B, with K _i values of 1.10 ± 0.20 and 3.0 ± 0.27 nM, respectively. Cytotoxic studies showed that MK5, MK6, MK12, and MK14 exhibited low toxicities on Vero cells, with IC₅₀ values of 218.4, 149.1, 99.96, and 162.3 μg/mL, respectively, which were much higher than those for their effective nanomolar-level concentrations. Also, MK5, MK6, MK12, and MK14 decreased cell damage in H₂O₂-induced cells via a significant scavenging effect of reactive oxygen species. Molecular modeling was performed to rationalize the potential inhibitory activities of MK5, MK6, MK12, and MK14 toward MAO-B and their possible binding mechanisms, showing high-affinity binding pocket interactions and conformation perturbations of the compounds with MAO-B, which were interpreted as the conformational dynamics of MAO-B. This study concluded that all the compounds tested were more potent MAO-B inhibitors than the reference drugs, and leading compounds could be further explored for their effectiveness in various kinds of neurodegenerative disorders.