Penetration Profile of Microspheres in Follicular Targeting of Terminal Hair Follicles

Microchanneling and ultrasonic delivery of gold and platinum nanoparticles for selective photothermolysis of sebaceous follicles in the treatment of acne: a pilot study using porcine skin

PURPOSE

Several treatment options for acne vulgaris are limited by their associated adverse effects. An innovative approach involves introducing light-absorbing nanoparticles into sebaceous follicles before destroying the follicles using selective photothermolysis. We aimed to investigate efficient methods for introducing gold and platinum nanoparticles into sebaceous follicles and to identify suitable laser equipment and parameters for the effective destruction of these follicles.

METHODS

We used porcine skin as the experimental model. We compared the efficacies of a thulium laser, ultrasound, and manual massage and evaluated the optimal method for delivering nanoparticles in close proximity to sebaceous follicles. Subsequently, a 1064-nm-wavelength neodymium-doped yttrium aluminum garnet (Nd: YAG) laser was employed to induce selective photothermolysis. We compared different parameters to identify the optimal pulse duration and fluence of the Nd: YAG laser. The extent of penetration and destruction of sebaceous follicles was assessed using hematoxylin and eosin (H&E) staining, and a numerical evaluation was conducted.

RESULTS

H&E staining showed that irradiation with a long-pulsed Nd: YAG laser following a combination of thulium laser and sonophoresis effectively destroyed sebaceous follicles, with destruction rates exceeding 50%. These results were valid with a long pulse duration and a high fluence of the Nd: YAG laser.

CONCLUSION

This study demonstrated that sebaceous follicles can be effectively destroyed through a mixture of gold and platinum nanoparticle delivery by a combination of microchanneling and sonophoresis, followed by selective thermal damage induced by a 1064-nm long-pulsed high-fluence Nd: YAG laser.

Development of solid lipid microparticles (SLMs) containing asiatic acid for topical treatment of acne: Characterization, stability, in vitro and in vivo anti-acne assessment

Solid lipid microparticles (SLMs) represent a promising approach for drug delivery in anti-acne applications. In this study, asiatic acid-loaded SLMs (AASLMs) were prepared by melt emulsification method in conjunction with freeze-drying. Comprehensive evaluations comprised particle size, %entrapment efficiency (%EE), %labeled amount (%LA), surface morphology, stability, %release, %skin permeation, and anti-acne activity. The AASLMs exhibited an average particle size ranging from 7.46 to 38.86 µm, with %EE and %LA falling within the range of 31.56 to 100.00 and 90.43 to 95.38, respectively. The AASLMs demonstrated a spherical shape under scanning electron microscopy, and maintained stability over a 3-month period. Notably, formulations with 10 % and 15 % cetyl alcohol stabilized with poloxamer-188 (specifically F6 and F12) displayed a minimum inhibitory concentration (MIC) value of 75 mg/ml against Cutibacterium acnes. Furthermore, F12 exhibited a higher %release and %skin permeation compared to F6 over 24 h. In a single-blind clinical trial involving fifteen participants with mild-to-moderate acne, F12 showcased its potential not only in reducing porphyrin intensity and enhancing skin barriers but also in significantly improving skin hydration and brightness. However, further investigations with larger subject cohorts encompassing diverse age groups and genders are necessary to thoroughly establish the performance of the developed AASLMs.

Keratin Microspheres as Promising Tool for Targeting Follicular Growth

Skin is the body barrier that constrains the infiltration of particles and exogenous aggression, in which the hair follicle plays an important role. Recent studies have shown that small particles can penetrate the skin barrier and reach the hair follicle, making them a potential avenue for delivering hair growth-related substances. Interestingly, keratin-based microspheres are widely used as drug delivery carriers in various fields. In this current study, we pursue the effect of newly synthesized 3D spherical keratin particles on inducing hair growth in C57BL/6 male mice and in human hair follicle dermal papilla cells. The microspheres were created from partially sulfonated, water-soluble keratin. The keratin microspheres swelled in water to form spherical gels, which were used for further experiments. Following topical application for a period of 20 days, we observed a regrowth of hair in the previously depleted area on the dorsal part of the mice in the keratin microsphere group. This observation was accompanied by the regulation of hair-growth-related pathways as well as changes in markers associated with epidermal cells, keratin, and collagen. Interestingly, microsphere keratin treatment enhanced the cell proliferation and the expression of hair growth markers in dermal papilla cells. Based on our data, we propose that 3D spherical keratin has the potential to specifically target hair follicle growth and can be employed as a carrier for promoting hair growth-related agents.

Microplastic-induced inhibition of cell adhesion and toxicity evaluation using human dermal fibroblast-derived spheroids

Nanoplastics and microplastics (MPs) can significantly affect marine ecosystems and pose potential risks to human health. Although adverse effects stemming from direct exposure to MPs have been demonstrated at the cellular level in animal models, the potential toxicity of these materials in the human body remains uncertain. In this study, we investigated the three-dimensional (3D) behavior of dermal-derived cells exposed to MPs using artificially manufactured spherical primary polystyrene (PS) particles. To explore these effects, we used cellular spheroids as a 3D cell culture model, examined the size-dependent penetration of PS-MPs, and observed morphological alterations in the spheroids. Furthermore, we assessed changes in physiological activities, including reactive oxygen species, adenosine triphosphate, and lactate dehydrogenase, to elucidate the potential intra- and extracellular toxic reactions to PS-MPs. Additionally, our examination of cell-cell junctions and the extracellular matrix (ECM), along with analysis of the regulators involved in their decreased integrity, revealed negatively influenced changes in expression. This exposure study using spheroid models provides new insights into the potential toxicity of short-term exposure to MPs under conditions that closely resemble in vivo systems.

Alopecia areata: review of epidemiology, pathophysiology, current treatments and nanoparticulate delivery system

Alopecia areata (AA) is a kind of alopecia that affects hair follicles and nails. It typically comes with round patches and is a type of nonscarring hair loss. Various therapies are accessible for the management and treatment of AA, including topical, systemic and injectable modalities. It is a very complex type of autoimmune disease and is identified as round patches of hair loss and may occur at any age. This review paper highlights the epidemiology, clinical features, pathogenesis and new treatment options for AA, with a specific emphasis on nanoparticulate drug-delivery systems. By exploring these innovative treatment approaches, researchers aim to enhance the effectiveness and targeted delivery of therapeutic agents, ultimately improving outcomes for individuals living with AA.

Association of air quality index (AQI) with incidence of atopic dermatitis in Taiwan: A nationwide population-based cohort study

BACKGROUND

Air pollutants may aggravate atopic dermatitis (AD). However, the association between Air Quality Index (AQI) and incidence of AD remains unknown.

OBJECTIVE

To investigate association between AQI and incidence of AD, using the nationwide cohort in the Taiwan National Health Insurance Research Database (NHIRD).

METHODS

We included 21,278,938 participants from the NHIRD not diagnosed with AD before 2008. Long-term average AQI value, obtained from the Taiwan Air Quality Monitoring System Network, before AD diagnosis was calculated and linked for each participant.

RESULTS

199,205 incident cases of AD were identified from 2008 to 2018. Participants were classified into 4 quantiles (Q) by AQI value. With the lowest quantile, Q1, as reference, the AD risk increased significantly in the Q2 group (adjusted hazard ratio [aHR]: 1.29, 95% confidence interval [CI]: 1.04-1.65), Q3 group (aHR: 4.71, 95% CI: 3.78-6.04), and was highest in the Q4 group (aHR: 13.20, 95% CI: 10.86-16.60). As AQI treated as a continuous variable, an increase of 1 unit of AQI value added 7% of AD risk (aHR, 1.07, 95% CI: 1.07-1.08).

LIMITATIONS

The NHIRD lacks detailed information on individual subjects.

CONCLUSIONS

The results demonstrated a significant positive association between AQI and incidence of AD with a clear dose-response relationship.

Promoting New Approach Methodologies (NAMs) for research on skin color changes in response to environmental stress factors: tobacco and air pollution

Aging is one of the most dynamic biological processes in the human body and is known to carry significant impacts on individuals' self-esteem. Skin pigmentation is a highly heritable trait made possible by complex, strictly controlled cellular and molecular mechanisms. Genetic, environmental and endocrine factors contribute to the modulation of melanin's amount, type and distribution in the skin layers. One of the hallmarks of extrinsic skin aging induced by environmental stress factors is the alteration of the constitutive pigmentation pattern clinically defined as senile lentigines and/or melasma or other pigmentary dyschromias. The complexity of pollutants and tobacco smoke as environmental stress factors warrants a thorough understanding of the mechanisms by which they impact skin pigmentation through repeated and long-term exposure. Pre-clinical and clinical studies demonstrated that pollutants are known to induce reactive oxygen species (ROS) or inflammatory events that lead directly or indirectly to skin hyperpigmentation. Another mechanistic direction is provided by Aryl hydrocarbon Receptors (AhR) which were shown to mediate processes leading to skin hyperpigmentation in response to pollutants by regulation of melanogenic enzymes and transcription factors involved in melanin biosynthesis pathway. In this context, we will discuss a diverse range of New Approach Methodologies (NAMs) capable to provide mechanistic insights of the cellular and molecular pathways involved in the action of environmental stress factors on skin pigmentation and to support the design of raw ingredients and formulations intended to counter their impact and of any subsequently needed clinical studies.

Cannabidiol-Loaded Lipid-Stabilized Nanoparticles Alleviate Psoriasis Severity in Mice: A New Approach for Improved Topical Drug Delivery

Cannabidiol (CBD) is a promising natural agent for treating psoriasis. CBD activity is attributed to inhibition of NF-kB, IL-1β, IL-6, and IL-17A. The present study evaluated the anti-psoriatic effect of cannabidiol in lipid-stabilized nanoparticles (LSNs) using an imiquimod (IMQ)-induced psoriasis model in mice. CBD-loaded LSNs were stabilized with three types of lipids, Cetyl alcohol (CA), Lauric acid (LA), and stearic-lauric acids (SALA), and were examined in-vitro using rat skin and in-vivo using the IMQ-model. LSNs loaded with coumarin-6 showed a localized penetration depth of about 100 µm into rat skin. The LSNs were assessed by the IMQ model accompanied by visual (psoriasis area severity index; PASI), histological, and pro-psoriatic IL-17A evaluations. Groups treated with CBD-loaded LSNs were compared to groups treated with CBD-containing emulsion, unloaded LSNs, and clobetasol propionate, and to an untreated group. CBD-loaded LSNs significantly reduced PASI scoring compared to the CBD emulsion, the unloaded LSNs, and the untreated group (negative controls). In addition, SALA- and CA-containing nanoparticles significantly inhibited IL-17A release, showing a differential response: SALA > CA > LA. The data confirms the effectiveness of CBD in psoriasis therapy and underscores LSNs as a promising platform for delivering CBD to the skin.

Boosting hair growth through follicular delivery of Melatonin through lecithin-enhanced Pickering emulsion stabilized by chitosan-dextran nanoparticles in testosterone induced androgenic alopecia rat model

The strategy in this work was loading Melatonin (MEL), the powerful antioxidant photosensitive molecule, in novel Pickering emulsions (PEs) stabilized by chitosan-dextran sulphate nanoparticles (CS-DS NPs) and enhanced by lecithin, for treatment of androgenic alopecia (AGA). Biodegradable CS-DS NPs dispersion was prepared by polyelectrolyte complexation and optimized for PEs stabilization. PEs were characterized for droplet size, zeta potential, morphology, photostability and antioxidant activity. Ex-vivo permeation study through rat full thickness skin was conducted with optimized formula. Differential tape stripping trailed by cyanoacrylate skin surface biopsy was executed, for quantifying MEL in skin compartments and hair follicles. In-vivo evaluation of MEL PE hair growth activity was performed on testosterone induced AGA rat model. Visual inspection followed by anagen to telogen phase ratio (A/T) and histopathological examinations were conducted and compared with marketed 5% minoxidil spray "Rogaine ®". Data showed that PE improved MEL antioxidant activity and photostability. Ex-vivo results displayed MEL PE high follicular deposition. In-vivo study demonstrated that MEL PE treated testosterone induced AGA rat group, restored hair loss and produced maximum hair regeneration along with prolonged anagen phase amongst tested groups. The histopathological examination revealed that MEL PE prolonged anagen stage, increased follicular density and A/T ratio by 1.5-fold. The results suggested that lecithin-enhanced PE stabilized by CS-DS NPs was found to be an effective approach to enhance photostability, antioxidant activity and follicular delivery of MEL. Thus, MEL-loaded PE could be a promising competitor to commercially marketed Minoxidil for treatment of AGA.

The Minderoo-Monaco Commission on Plastics and Human Health

Background

Plastics have conveyed great benefits to humanity and made possible some of the most significant advances of modern civilization in fields as diverse as medicine, electronics, aerospace, construction, food packaging, and sports. It is now clear, however, that plastics are also responsible for significant harms to human health, the economy, and the earth's environment. These harms occur at every stage of the plastic life cycle, from extraction of the coal, oil, and gas that are its main feedstocks through to ultimate disposal into the environment. The extent of these harms not been systematically assessed, their magnitude not fully quantified, and their economic costs not comprehensively counted.

Goals

The goals of this Minderoo-Monaco Commission on Plastics and Human Health are to comprehensively examine plastics' impacts across their life cycle on: (1) human health and well-being; (2) the global environment, especially the ocean; (3) the economy; and (4) vulnerable populations-the poor, minorities, and the world's children. On the basis of this examination, the Commission offers science-based recommendations designed to support development of a Global Plastics Treaty, protect human health, and save lives.

Report Structure

This Commission report contains seven Sections. Following an Introduction, Section 2 presents a narrative review of the processes involved in plastic production, use, and disposal and notes the hazards to human health and the environment associated with each of these stages. Section 3 describes plastics' impacts on the ocean and notes the potential for plastic in the ocean to enter the marine food web and result in human exposure. Section 4 details plastics' impacts on human health. Section 5 presents a first-order estimate of plastics' health-related economic costs. Section 6 examines the intersection between plastic, social inequity, and environmental injustice. Section 7 presents the Commission's findings and recommendations.

Plastics

Plastics are complex, highly heterogeneous, synthetic chemical materials. Over 98% of plastics are produced from fossil carbon- coal, oil and gas. Plastics are comprised of a carbon-based polymer backbone and thousands of additional chemicals that are incorporated into polymers to convey specific properties such as color, flexibility, stability, water repellence, flame retardation, and ultraviolet resistance. Many of these added chemicals are highly toxic. They include carcinogens, neurotoxicants and endocrine disruptors such as phthalates, bisphenols, per- and poly-fluoroalkyl substances (PFAS), brominated flame retardants, and organophosphate flame retardants. They are integral components of plastic and are responsible for many of plastics' harms to human health and the environment.Global plastic production has increased almost exponentially since World War II, and in this time more than 8,300 megatons (Mt) of plastic have been manufactured. Annual production volume has grown from under 2 Mt in 1950 to 460 Mt in 2019, a 230-fold increase, and is on track to triple by 2060. More than half of all plastic ever made has been produced since 2002. Single-use plastics account for 35-40% of current plastic production and represent the most rapidly growing segment of plastic manufacture.Explosive recent growth in plastics production reflects a deliberate pivot by the integrated multinational fossil-carbon corporations that produce coal, oil and gas and that also manufacture plastics. These corporations are reducing their production of fossil fuels and increasing plastics manufacture. The two principal factors responsible for this pivot are decreasing global demand for carbon-based fuels due to increases in 'green' energy, and massive expansion of oil and gas production due to fracking.Plastic manufacture is energy-intensive and contributes significantly to climate change. At present, plastic production is responsible for an estimated 3.7% of global greenhouse gas emissions, more than the contribution of Brazil. This fraction is projected to increase to 4.5% by 2060 if current trends continue unchecked.

Plastic Life Cycle

The plastic life cycle has three phases: production, use, and disposal. In production, carbon feedstocks-coal, gas, and oil-are transformed through energy-intensive, catalytic processes into a vast array of products. Plastic use occurs in every aspect of modern life and results in widespread human exposure to the chemicals contained in plastic. Single-use plastics constitute the largest portion of current use, followed by synthetic fibers and construction.Plastic disposal is highly inefficient, with recovery and recycling rates below 10% globally. The result is that an estimated 22 Mt of plastic waste enters the environment each year, much of it single-use plastic and are added to the more than 6 gigatons of plastic waste that have accumulated since 1950. Strategies for disposal of plastic waste include controlled and uncontrolled landfilling, open burning, thermal conversion, and export. Vast quantities of plastic waste are exported each year from high-income to low-income countries, where it accumulates in landfills, pollutes air and water, degrades vital ecosystems, befouls beaches and estuaries, and harms human health-environmental injustice on a global scale. Plastic-laden e-waste is particularly problematic.

Environmental Findings

Plastics and plastic-associated chemicals are responsible for widespread pollution. They contaminate aquatic (marine and freshwater), terrestrial, and atmospheric environments globally. The ocean is the ultimate destination for much plastic, and plastics are found throughout the ocean, including coastal regions, the sea surface, the deep sea, and polar sea ice. Many plastics appear to resist breakdown in the ocean and could persist in the global environment for decades. Macro- and micro-plastic particles have been identified in hundreds of marine species in all major taxa, including species consumed by humans. Trophic transfer of microplastic particles and the chemicals within them has been demonstrated. Although microplastic particles themselves (>10 µm) appear not to undergo biomagnification, hydrophobic plastic-associated chemicals bioaccumulate in marine animals and biomagnify in marine food webs. The amounts and fates of smaller microplastic and nanoplastic particles (MNPs <10 µm) in aquatic environments are poorly understood, but the potential for harm is worrying given their mobility in biological systems. Adverse environmental impacts of plastic pollution occur at multiple levels from molecular and biochemical to population and ecosystem. MNP contamination of seafood results in direct, though not well quantified, human exposure to plastics and plastic-associated chemicals. Marine plastic pollution endangers the ocean ecosystems upon which all humanity depends for food, oxygen, livelihood, and well-being.

Human Health Findings

Coal miners, oil workers and gas field workers who extract fossil carbon feedstocks for plastic production suffer increased mortality from traumatic injury, coal workers' pneumoconiosis, silicosis, cardiovascular disease, chronic obstructive pulmonary disease, and lung cancer. Plastic production workers are at increased risk of leukemia, lymphoma, hepatic angiosarcoma, brain cancer, breast cancer, mesothelioma, neurotoxic injury, and decreased fertility. Workers producing plastic textiles die of bladder cancer, lung cancer, mesothelioma, and interstitial lung disease at increased rates. Plastic recycling workers have increased rates of cardiovascular disease, toxic metal poisoning, neuropathy, and lung cancer. Residents of "fenceline" communities adjacent to plastic production and waste disposal sites experience increased risks of premature birth, low birth weight, asthma, childhood leukemia, cardiovascular disease, chronic obstructive pulmonary disease, and lung cancer.During use and also in disposal, plastics release toxic chemicals including additives and residual monomers into the environment and into people. National biomonitoring surveys in the USA document population-wide exposures to these chemicals. Plastic additives disrupt endocrine function and increase risk for premature births, neurodevelopmental disorders, male reproductive birth defects, infertility, obesity, cardiovascular disease, renal disease, and cancers. Chemical-laden MNPs formed through the environmental degradation of plastic waste can enter living organisms, including humans. Emerging, albeit still incomplete evidence indicates that MNPs may cause toxicity due to their physical and toxicological effects as well as by acting as vectors that transport toxic chemicals and bacterial pathogens into tissues and cells.Infants in the womb and young children are two populations at particularly high risk of plastic-related health effects. Because of the exquisite sensitivity of early development to hazardous chemicals and children's unique patterns of exposure, plastic-associated exposures are linked to increased risks of prematurity, stillbirth, low birth weight, birth defects of the reproductive organs, neurodevelopmental impairment, impaired lung growth, and childhood cancer. Early-life exposures to plastic-associated chemicals also increase the risk of multiple non-communicable diseases later in life.

Economic Findings

Plastic's harms to human health result in significant economic costs. We estimate that in 2015 the health-related costs of plastic production exceeded $250 billion (2015 Int$) globally, and that in the USA alone the health costs of disease and disability caused by the plastic-associated chemicals PBDE, BPA and DEHP exceeded $920 billion (2015 Int$). Plastic production results in greenhouse gas (GHG) emissions equivalent to 1.96 gigatons of carbon dioxide (CO2e) annually. Using the US Environmental Protection Agency's (EPA) social cost of carbon metric, we estimate the annual costs of these GHG emissions to be $341 billion (2015 Int$).These costs, large as they are, almost certainly underestimate the full economic losses resulting from plastics' negative impacts on human health and the global environment. All of plastics' economic costs-and also its social costs-are externalized by the petrochemical and plastic manufacturing industry and are borne by citizens, taxpayers, and governments in countries around the world without compensation.

Social Justice Findings

The adverse effects of plastics and plastic pollution on human health, the economy and the environment are not evenly distributed. They disproportionately affect poor, disempowered, and marginalized populations such as workers, racial and ethnic minorities, "fenceline" communities, Indigenous groups, women, and children, all of whom had little to do with creating the current plastics crisis and lack the political influence or the resources to address it. Plastics' harmful impacts across its life cycle are most keenly felt in the Global South, in small island states, and in disenfranchised areas in the Global North. Social and environmental justice (SEJ) principles require reversal of these inequitable burdens to ensure that no group bears a disproportionate share of plastics' negative impacts and that those who benefit economically from plastic bear their fair share of its currently externalized costs.

Conclusions

It is now clear that current patterns of plastic production, use, and disposal are not sustainable and are responsible for significant harms to human health, the environment, and the economy as well as for deep societal injustices.The main driver of these worsening harms is an almost exponential and still accelerating increase in global plastic production. Plastics' harms are further magnified by low rates of recovery and recycling and by the long persistence of plastic waste in the environment.The thousands of chemicals in plastics-monomers, additives, processing agents, and non-intentionally added substances-include amongst their number known human carcinogens, endocrine disruptors, neurotoxicants, and persistent organic pollutants. These chemicals are responsible for many of plastics' known harms to human and planetary health. The chemicals leach out of plastics, enter the environment, cause pollution, and result in human exposure and disease. All efforts to reduce plastics' hazards must address the hazards of plastic-associated chemicals.

Recommendations

To protect human and planetary health, especially the health of vulnerable and at-risk populations, and put the world on track to end plastic pollution by 2040, this Commission supports urgent adoption by the world's nations of a strong and comprehensive Global Plastics Treaty in accord with the mandate set forth in the March 2022 resolution of the United Nations Environment Assembly (UNEA).International measures such as a Global Plastics Treaty are needed to curb plastic production and pollution, because the harms to human health and the environment caused by plastics, plastic-associated chemicals and plastic waste transcend national boundaries, are planetary in their scale, and have disproportionate impacts on the health and well-being of people in the world's poorest nations. Effective implementation of the Global Plastics Treaty will require that international action be coordinated and complemented by interventions at the national, regional, and local levels.This Commission urges that a cap on global plastic production with targets, timetables, and national contributions be a central provision of the Global Plastics Treaty. We recommend inclusion of the following additional provisions:The Treaty needs to extend beyond microplastics and marine litter to include all of the many thousands of chemicals incorporated into plastics.The Treaty needs to include a provision banning or severely restricting manufacture and use of unnecessary, avoidable, and problematic plastic items, especially single-use items such as manufactured plastic microbeads.The Treaty needs to include requirements on extended producer responsibility (EPR) that make fossil carbon producers, plastic producers, and the manufacturers of plastic products legally and financially responsible for the safety and end-of-life management of all the materials they produce and sell.The Treaty needs to mandate reductions in the chemical complexity of plastic products; health-protective standards for plastics and plastic additives; a requirement for use of sustainable non-toxic materials; full disclosure of all components; and traceability of components. International cooperation will be essential to implementing and enforcing these standards.The Treaty needs to include SEJ remedies at each stage of the plastic life cycle designed to fill gaps in community knowledge and advance both distributional and procedural equity.This Commission encourages inclusion in the Global Plastic Treaty of a provision calling for exploration of listing at least some plastic polymers as persistent organic pollutants (POPs) under the Stockholm Convention.This Commission encourages a strong interface between the Global Plastics Treaty and the Basel and London Conventions to enhance management of hazardous plastic waste and slow current massive exports of plastic waste into the world's least-developed countries.This Commission recommends the creation of a Permanent Science Policy Advisory Body to guide the Treaty's implementation. The main priorities of this Body would be to guide Member States and other stakeholders in evaluating which solutions are most effective in reducing plastic consumption, enhancing plastic waste recovery and recycling, and curbing the generation of plastic waste. This Body could also assess trade-offs among these solutions and evaluate safer alternatives to current plastics. It could monitor the transnational export of plastic waste. It could coordinate robust oceanic-, land-, and air-based MNP monitoring programs.This Commission recommends urgent investment by national governments in research into solutions to the global plastic crisis. This research will need to determine which solutions are most effective and cost-effective in the context of particular countries and assess the risks and benefits of proposed solutions. Oceanographic and environmental research is needed to better measure concentrations and impacts of plastics <10 µm and understand their distribution and fate in the global environment. Biomedical research is needed to elucidate the human health impacts of plastics, especially MNPs.

Summary

This Commission finds that plastics are both a boon to humanity and a stealth threat to human and planetary health. Plastics convey enormous benefits, but current linear patterns of plastic production, use, and disposal that pay little attention to sustainable design or safe materials and a near absence of recovery, reuse, and recycling are responsible for grave harms to health, widespread environmental damage, great economic costs, and deep societal injustices. These harms are rapidly worsening.While there remain gaps in knowledge about plastics' harms and uncertainties about their full magnitude, the evidence available today demonstrates unequivocally that these impacts are great and that they will increase in severity in the absence of urgent and effective intervention at global scale. Manufacture and use of essential plastics may continue. However, reckless increases in plastic production, and especially increases in the manufacture of an ever-increasing array of unnecessary single-use plastic products, need to be curbed.Global intervention against the plastic crisis is needed now because the costs of failure to act will be immense.

Functional nano-systems for transdermal drug delivery and skin therapy

Transdermal drug delivery is one of the least intrusive and patient-friendly ways for therapeutic agent administration. Recently, functional nano-systems have been demonstrated as one of the most promising strategies to treat skin diseases by improving drug penetration across the skin barrier and achieving therapeutically effective drug concentrations in the target cutaneous tissues. Here, a brief review of functional nano-systems for promoting transdermal drug delivery is presented. The fundamentals of transdermal delivery, including skin biology and penetration routes, are introduced. The characteristics of functional nano-systems for facilitating transdermal drug delivery are elucidated. Moreover, the fabrication of various types of functional transdermal nano-systems is systematically presented. Multiple techniques for evaluating the transdermal capacities of nano-systems are illustrated. Finally, the advances in the applications of functional transdermal nano-systems for treating different skin diseases are summarized.

The Fundamental Role of Lipids in Polymeric Nanoparticles: Dermal Delivery and Anti-Inflammatory Activity of Cannabidiol

This report presents a nanoparticulate platform for cannabidiol (CBD) for topical treatment of inflammatory conditions. We have previously shown that stabilizing lipids improve the encapsulation of CBD in ethyl cellulose nanoparticles. In this study, we examined CBD release, skin permeation, and the capability of lipid-stabilized nanoparticles (LSNs) to suppress the release of IL-6 and IL-8. The nanoparticles were stabilized with cetyl alcohol (CA), stearic acid (SA), lauric acid (LA), and an SA/LA eutectic combination (SALA). LSN size and concentration were measured and characterized by differential scanning calorimetry (DSC), in vitro release of loaded CBD, and skin permeability. IL-6 and IL-8 secretions from TNF-α-induced HaCaT cells were monitored following different LSN treatments. CBD released from the LSNs in dispersion at increasing concentrations of polysorbate 80 showed non-linear solubilization, which was explained by recurrent precipitation. A significant high release of CBD in a cell culture medium was shown from SALA-stabilized nanoparticles. Skin permeation was >30% lower from SA-stabilized nanoparticles compared to the other LSNs. Investigation of the CBD-loaded LSNs' effect on the release of IL-6 and IL-8 from TNF-α-induced HaCaT cells showed that nanoparticles stabilized with CA, LA, or SALA were similarly effective in suppressing cytokine release. The applicability of the CBD-loaded LSNs to treat topical inflammatory conditions has been supported by their dermal permeation and release inhibition of pro-inflammatory cytokines.

Plant Exosome-like Nanoparticles as Biological Shuttles for Transdermal Drug Delivery

Exosomes act as emerging transdermal drug delivery vehicles with high deformability and excellent permeability, which can be used to deliver various small-molecule drugs and macromolecular drugs and increase the transdermal and dermal retention of drugs, improving the local efficacy and drug delivery compliance. At present, there are many studies on the use of plant exosome-like nanoparticles (PELNVs) as drug carriers. In this review, the source, extraction, isolation, and chemical composition of plant exosomes are reviewed, and the research progress on PELNVs as drug delivery systems in transdermal drug delivery systems in recent years has elucidated the broad application prospect of PELNVs.

Topical Semisolid Products-Understanding the Impact of Metamorphosis on Skin Penetration and Physicochemical Properties

Recently, the United States Food and Drug Administration published a series of product-specific guidance for the development of topical drugs, with in vitro options consisting of qualitative sameness (Q1) and quantitative sameness (Q2) assessment of formulations, physiochemical and structural characterization of formulations (Q3), and, potentially, in vitro drug release and permeation tests. In these tests, the topical semisolid product's critical quality attributes (CQAs), such as rheological properties, thermodynamic activity, particle size, globule size, and rate/extent of drug release/permeation, are evaluated to ensure the desired product quality. However, alterations in these CQAs of the drug products may occur under 'in use' conditions because of various metamorphosis events, such as evaporation that leads to supersaturation and crystallization, which may eventually result in specific failure modes of semisolid products. Under 'in use' conditions, a limited amount of formulation is applied to the skin, where physicochemical characteristics of the formulation are substantially altered from primary state to secondary and, eventually, tertiary state on the skin. There is an urgent need to understand the behavior of topical semisolid products under 'in use' conditions. In this review, we attempt to cover a series of metamorphosis events and their impact on CQAs (Q3 attributes), such as viscosity, drug activity, particle size, globule size, and drug release/permeation of topical semisolid products.

[Effects of Skin Environmental Changes by Steam Towel, Ethanol, l-Menthol and Carpronium on the Drug Behavior in the Minoxidil Nanoparticles-applied Mice]

We previously designed the formulation containing minoxidil (MXD) nanoparticles (MXD-NPs), and found that the MXD-NPs can mainly deliver MXD into hair bulbs via hair follicles pathway, and that the therapeutic efficiency for hair growth is higher in comparison with the formulation containing dissolved MXD. In this study, we investigated whether the skin environmental changes by the treatment of steam towel, ethanol, l-menthol and commercially available (CA) carpronium affect the drug behavior in the MXD-NPs-applied mice. The steam towel, ethanol, l-menthol and CA-carpronium were pre-treated 3 min before MXD-NPs application, and the MXD content in the hair bulge, bulb, skin tissue and blood of mice were measured 4 h after MXD-NPs application. No significant difference of MXD levels in the blood was observed by the pre-treatment of steam towel, ethanol, l-menthol and CA-carpronium. On the other hand, the pre-treatment of steam towel and l-menthol enhanced the MXD levels in hair bulge and/or bulb. Although, the MXD levels in hair bulge and bulb were not changed by the pre-treatment of ethanol, the MXD levels in skin tissue was higher than that of saline-pre-treated group (control). The MXD levels in hair bulge, bulb and skin tissue of mice pre-treated with CA-carpronium were remarkably higher in comparison with control. In conclusion, we showed that the changes in skin environment by the steam towel, ethanol, l-menthol and CA-carpronium affected the absorption of MXD-NPs, and these increased MXD levels in the hair bulb and blood by the combination may enhance the therapeutic efficiency without side effects.

Biological and Intracellular Fates of Drug Nanocrystals through Different Delivery Routes: Recent Development Enabled by Bioimaging and PK Modeling

Nanocrystals have contributed to exciting improvements in the delivery of poorly water-soluble drugs. The biological and intracellular fates of nanocrystals are currently under debate. Due to the remarkable commercial success in enhancing oral bioavailability, nanocrystals have originally been regarded as a simple formulation approach to enhance dissolution. However, the latest findings from novel bioimaging tools lead to an expanded view. Intact nanocrystals may offer long-term durability in the body and offer drug delivery capabilities like those of other nano-carriers. This review renews the understanding of the biological fates of nanocrystals administered via oral, intravenous, and parenteral (e.g., dermal, ocular, and pulmonary) routes. The intracellular pathways and dissolution kinetics of nanocrystals are explored. Additionally, the future trends for in vitro and in vivo quantification of nanocrystals, as well as factors impacting the biological and intracellular fates of nanocrystals are discussed. In conclusion, nanocrystals present a promising and underexplored therapeutic opportunity with immense potential.

In-Vivo Tape Stripping Study with Caffeine for Comparisons on Body Sites, Age and Washing

PURPOSE

Assessing the percutaneous absorption of cosmetic ingredients using in-vitro human skin reveals certain limitations, such as restricted anatomical sites and repeated exposure, and to overcome these issues, in-vivo studies are required. The aim of the study is to develop a robust non-invasive in-vivo protocol that should be applicable to a wide range of application.

METHODS

A robust tape stripping protocol was therefore designed according to recent recommendations, and the impact of two different washing procedures on caffeine distribution in tape strips was investigated to optimise the protocol. The optimised protocol was then used to study the effect of age and anatomical area on the percutaneous absorption of caffeine, including facial areas which are not readily available for in-vitro studies.

RESULTS

With tape stripping, a difference between the percutaneous absorption on the face (forehead, cheek) and the volar forearm was observed. No obvious difference was observed between percutaneous absorption in young and post-menopausal women, but this could be due to the limited number of subjects.

CONCLUSION

This tape stripping protocol is now to be deployed to address many other factors, such as percutaneous absorption in other anatomical areas (e.g. abdomen, axilla, etc.), impact of repeated applications and effect of formulation.

Micro/Nanosystems for Magnetic Targeted Delivery of Bioagents

Targeted delivery of pharmaceuticals is promising for efficient disease treatment and reduction in adverse effects. Nano or microstructured magnetic materials with strong magnetic momentum can be noninvasively controlled via magnetic forces within living beings. These magnetic carriers open perspectives in controlling the delivery of different types of bioagents in humans, including small molecules, nucleic acids, and cells. In the present review, we describe different types of magnetic carriers that can serve as drug delivery platforms, and we show different ways to apply them to magnetic targeted delivery of bioagents. We discuss the magnetic guidance of nano/microsystems or labeled cells upon injection into the systemic circulation or in the tissue; we then highlight emergent applications in tissue engineering, and finally, we show how magnetic targeting can integrate with imaging technologies that serve to assist drug delivery.

Iontophoresis of Biological Macromolecular Drugs

Over the last few decades, biological macromolecular drugs (e.g., peptides, proteins, and nucleic acids) have become a significant therapeutic modality for the treatment of various diseases. These drugs are considered superior to small-molecule drugs because of their high specificity and favorable safety profiles. However, such drugs are limited by their low oral bioavailability and short half-lives. Biological macromolecular drugs are typically administrated via invasive methods, e.g., intravenous or subcutaneous injections, which can be painful and induce needle phobia. Noninvasive transdermal delivery is an alternative administration route for the local and systemic delivery of biological macromolecular drugs. However, a challenge with the noninvasive transdermal delivery of biological macromolecular drugs is the outermost layer of the skin, known as the stratum corneum, which is a physical barrier that restricts the entry of extraneous macromolecules. Iontophoresis (IP) relies on the application of a low level of electricity for transdermal drug delivery, in order to facilitate the skin permeation of hydrophilic and charged molecules. The IP of several biological macromolecular drugs has recently been investigated. Herein, we review the IP-mediated noninvasive transdermal delivery of biological macromolecular drugs, their routes of skin permeation, their underlying mechanisms, and their advance applications.

Nanostructured Drug Delivery Systems for Targeting 5-α-Reductase Inhibitors to the Hair Follicle

Androgenetic alopecia is a multifactorial condition characterized by noticeable hair loss, affecting both men and women and representing a debilitating and chronic disorder that considerably affects the quality of life. Available topical treatments based on minoxidil or finasteride require repeated applications and are associated with a certain number of adverse effects. The challenges associated with current treatments pave the way for the research of new therapeutic strategies, more precise and selective, and capable of providing long-term results. In this context, the present review examines the new proposed formulation strategies to deliver 5-α-reductase inhibitors in order to obtain a targeted drug delivery, for improving drug retention at the site of action in the hair follicle, contemporaneously reducing drug systemic absorption, which is the cause of important adverse effects. In particular, the research will be focused on the several aspects that influence the performance of nanostructured drug delivery systems in creating a depot in the hair follicles, such as particle size, surface charge, excipients, and combined application with external stimuli (infrared radiation, mechanical massage, ultrasounds application).

Mapping hair follicle-targeted delivery by particle systems: What has science accomplished so far?

The importance of the hair follicle in the process of cutaneous drug penetration has been established since this skin appendage was recognized as an entry point for topically applied substances. A comprehensive review on the hair follicle as a target per se is here provided, exploring the current knowledge on both targeted regions and delivery systems that take advantage of this permeation route. The follicular penetration is a complex process, whose effectiveness and efficiency strongly depends on a diversity of different factors including follicular density and size, activity status of hair follicles and physicochemical properties of the topically applied substances. Nanocarriers represent a heterogeneous assembly of molecules organized into particles and they have revolutionized drug delivery in several areas of medicine, pharmacology and cosmetics. As they possess an inherent ability to use the follicular route, they are reviewed here having in perspective the hair follicle zones that they are able to reach as reported. In this way, a follicular road map for the different delivery systems was compiled to assist as a guiding tool for those that have interest in the development and/or application of such delivery systems for hair and skin treatment or care.

Safety Evaluation of Nanotechnology Products

Nanomaterials are now being used in a wide variety of biomedical applications. Medical and health-related issues, however, have raised major concerns, in view of the potential risks of these materials against tissue, cells, and/or organs and these are still poorly understood. These particles are able to interact with the body in countless ways, and they can cause unexpected and hazardous toxicities, especially at cellular levels. Therefore, undertaking in vitro and in vivo experiments is vital to establish their toxicity with natural tissues. In this review, we discuss the underlying mechanisms of nanotoxicity and provide an overview on in vitro characterizations and cytotoxicity assays, as well as in vivo studies that emphasize blood circulation and the in vivo fate of nanomaterials. Our focus is on understanding the role that the physicochemical properties of nanomaterials play in determining their toxicity.

Human Skin Permeation Enhancement Using PLGA Nanoparticles Is Mediated by Local pH Changes

The steady improvement and optimization of transdermal permeation is a constant and challenging pharmaceutical task. In this study the influence of poly(lactide-co-glycolide) (PLGA) nanoparticles on the dermal permeation of the anti-inflammatory drug flufenamic acid (FFA) was investigated. For this aim, different vehicles under non-buffered and buffered conditions and different skin models (human heat separated epidermis and reconstructed human epidermis equivalents) were tested. Permeation experiments were performed using static Franz diffusion cells under infinite dosing conditions. Already the presence of drug-free nanoparticles increased drug permeation across the skin. Drug permeation was even enhanced when applying drug-loaded nanoparticles. In contrast, buffered vehicles with different pH values (pH 5.4–7.4) revealed the influence of the pH on the permeation of FFA. The change of the surrounding pH of the biodegradable nanoparticulate system was demonstrated and visualized using pH-sensitive fluorescent probes. While a potential contribution of hair follicles could be ruled out, our data suggest that the enhanced permeation of FFA through human skin in the presence of PLGA nanoparticles is mediated by a locally decreased pH during hydrolytic degradation of this polymer. This hypothesis is supported by the observation that skin permeation of the weak base caffeine was not affected.

Topical drug delivery: History, percutaneous absorption, and product development

Topical products, widely used to manage skin conditions, have evolved from simple potions to sophisticated delivery systems. Their development has been facilitated by advances in percutaneous absorption and product design based on an increasingly mechanistic understanding of drug-product-skin interactions, associated experiments, and a quality-by-design framework. Topical drug delivery involves drug transport from a product on the skin to a local target site and then clearance by diffusion, metabolism, and the dermal circulation to the rest of the body and deeper tissues. Insights have been provided by Quantitative Structure Permeability Relationships (QSPR), molecular dynamics simulations, and dermal Physiologically Based PharmacoKinetics (PBPK). Currently, generic product equivalents of reference-listed products dominate the topical delivery market. There is an increasing regulatory interest in understanding topical product delivery behavior under 'in use' conditions and predicting in vivo response for population variations in skin barrier function and response using in silico and in vitro findings.

Characterization of nanoparticles made of ethyl cellulose and stabilizing lipids: Mode of manufacturing, size modulation, and study of their effect on keratinocytes

We have developed an ethyl cellulose-based nanoparticulate system for encapsulation of sparingly soluble active pharmaceutical ingredients. Cannabidiol (CBD) and curcumin (CUR) were selected as model active ingredients. Using the nanoprecipitation method, nanoparticles ranged between 150 nm and 250 nm were obtained with an entrapment efficiency of >80%. It has been shown that incorporation of stabilizing lipids significantly reduced aggregation, increased the yield and the active ingredient-to-polymer ratio. In this study, we have explored the influence of process parameters on the extent of new particle core formation: chemical properties of the active ingredients, polymer concentrations, non-solvent addition rate, and the volume of the organic solvent for nanoparticle size control. The relationship between the particle radius [R] and the polymer concentration [Pol] was defined by R ∝ [Pol]ⁿ when n < ⅓. The extent of polymer supersaturation was related to the value of n, when the high polymer supersaturation increased the formation rate of new particle cores while decreasing polymer layering on the existing cores and the nanoparticles size. The obtained nanoparticles have shown low toxicity in keratinocytes, however, higher loadings of CUR or CBD resulted in increased toxicity. The nanoparticles effectively internalized into keratinocytes, implying their applicability for dermal delivery.

Topical cationic hairy particles targeting cell free DNA in dermis enhance treatment of psoriasis

Abnormal high level of cell free DNA (cfDNA) triggers chronic inflammation to exacerbate psoriasis symptoms. Scavenging cfDNA by topical cationic polymeric nanoparticles has been certified as an effective therapeutic strategy for treating psoriasis. However, cationic cfDNA scavengers have a great potential risk to organs after entering systemic circulation through skin barrier. For better transformation to clinical application, herein a series of poly(2-(dimethylamino)ethyl methacrylate) (PDMA) grafted hairy silica particles (cSPs) with tunable PDMA length and particle size are applied to scavenge cfDNA in dermis. We reveal that the structure of cSPs correlates with the permeation ability across stratum corneum, retention time in dermis, binding affinity to cfDNA, and toxicity tolerance, which in turn affect the therapeutic effect. Especially, the cSPs of 700 nm show more accumulation and longer retention in psoriatic lesions, leading to excellent treatment results. They also outperform the cSPs of 200 nm at a lower administration frequency. Thus, we address the issues of size, cationic content of cSPs to open a potential new avenue to topically treatment of psoriasis by targeting cfDNA in dermis.

Transdermal Delivery of Chemotherapeutics: Strategies, Requirements, and Opportunities

Chemotherapeutic drugs are primarily administered to cancer patients via oral or parenteral routes. The use of transdermal drug delivery could potentially be a better alternative to decrease the dose frequency and severity of adverse or toxic effects associated with oral or parenteral administration of chemotherapeutic drugs. The transdermal delivery of drugs has shown to be advantageous for the treatment of highly localized tumors in certain types of breast and skin cancers. In addition, the transdermal route can be used to deliver low-dose chemotherapeutics in a sustained manner. The transdermal route can also be utilized for vaccine design in cancer management, for example, vaccines against cervical cancer. However, the design of transdermal formulations may be challenging in terms of the conjugation chemistry of the molecules and the sustained and reproducible delivery of therapeutically efficacious doses. In this review, we discuss the nano-carrier systems, such as nanoparticles, liposomes, etc., used in recent literature to deliver chemotherapeutic agents. The advantages of transdermal route over oral and parenteral routes for popular chemotherapeutic drugs are summarized. Furthermore, we also discuss a possible in silico approach, Formulating for Efficacy™, to design transdermal formulations that would probably be economical, robust, and more efficacious.

Film-Forming Systems for Dermal Drug Delivery

Film-forming formulations represent a novel form of sustained release dermatic products. They are applied to the skin as a liquid or semi-solid preparation. By evaporation of the volatile solvent on the skin, the polymer contained in the formulation forms a solid film. Various film-forming formulations were tested for their water and abrasion resistance and compared with conventional semi-solid formulations. Penetration and permeation studies of the formulations indicate a potential utility as transdermal therapeutic systems. They can be used as an alternative to patch systems to administer a variety of drugs in a topical way and may provide sustained release characteristics.

Molecule-Resolved Visualization of Particulate Matter on Human Skin Using Multimodal Nonlinear Optical Imaging

Precise measurement of particulate matter (PM) on skin is important for managing and preventing PM-related skin diseases. This study aims to directly visualize the deposition and penetration of PM into human skin using a multimodal nonlinear optical (MNLO) imaging system. We successfully obtained PM particle signals by merging two different sources, C–C vibrational frequency and autofluorescence, while simultaneously visualizing the anatomical features of the skin via keratin, collagen, and elastin. As a result, we found morphologically dependent PM deposition, as well as increased deposition following disruption of the skin barrier via tape-stripping. Furthermore, PM penetrated more and deeper into the skin with an increase in the number of tape-strippings, causing a significant increase in the secretion of pro-inflammatory cytokines. Our results suggest that MNLO imaging could be a useful technique for visualizing and quantifying the spatial distribution of PM in ex vivo human skin tissues.

A topical formulation containing quercetin-loaded microcapsules protects against oxidative and inflammatory skin alterations triggered by UVB irradiation: enhancement of activity by microencapsulation

Ultraviolet B (UVB) irradiation causes free radical production, increase inflammation and oxidative stress, thus, supporting the use of antioxidants by topical administration as therapeutic approaches. Quercetin (QC) is a flavonoid with antioxidant activity, however, high liposolubility makes it difficult to remain in the viable skin layer. Thus, this study evaluated whether microencapsulation of QC would enhance its activity in comparison with the same dose of free QC (non-active dose) and unloaded-microcapsules added in formulation for topical administration in a mouse model of UVB irradiation targeting the skin. Topical formulation containing Quercetin-loaded microcapsules (TFcQCMC) presents physico-chemical (colour, consistence, phase separation and pH) and functional antioxidant stability at 4 °C, room temperature and 40 °C for 6 months. TFcQCMC inhibited the UVB-triggered depletion of antioxidants observed by GSH (reduced glutathione), ability to reduce iron, ability to scavenge 2,2'-azinobis radical and catalase activity. TFcQCMC also inhibited markers of oxidation (lipid hydroperoxides and superoxide anion production). Concerning inflammation, TFcQCMC reduced the production of inflammatory cytokines, matrix metalloproteinase-9 activity, skin edoema, collagen fibre damage, myeloperoxidase activity/neutrophil recruitment, mast cell and sunburn cell counts. The pharmacological activity of TFcQCMC was not shared by the same pharmaceutical form containing the same dose of free QC or unloaded control microcapsules.

High-Sensitivity Permeation Analysis of Ultrasmall Nanoparticles Across the Skin by Positron Emission Tomography

Ultrasmall nanoparticles (US-NPs; <20 nm in hydrodynamic size) are now included in a variety of pharmacological and cosmetic products, and new technologies are needed to detect at high sensitivity the passage of small doses of these products across biological barriers such as the skin. In this work, a diffusion cell adapted to positron emission tomography (PET), a highly sensitive imaging technology, was developed to measure the passage of gold NPs (AuNPs) in skin samples in continuous mode. US-AuNPs (3.2 nm diam.; TEM) were functionalized with deferoxamine (DFO) and radiolabeled with ⁸⁹Zr_(IV) (half-life: 3.3 days, matching the timeline of diffusion tests). The physicochemical properties of the functionalized US-AuNPs (US-AuNPs-PEG-DFO) were characterized by FTIR (DFO grafting; hydroxamate peaks: 1629.0 cm^-1, 1569.0 cm^-1), XPS (presence of the O═C-N C 1s peak of DFO at 287.49 eV), and TGA (organic mass fraction). The passage of US-AuNPs-PEG-DFO-⁸⁹Zr_(IV) in skin samples was measured by PET, and the diffusion parameters were extracted thereby. The signals of radioactive US-AuNPs-PEG-DFO-⁸⁹Zr_(IV) leaving the donor compartment, passing through the skin, and entering the acceptor compartment were detected in continuous at concentrations as low as 2.2 nM of Au. The high-sensitivity acquisitions performed in continuous allowed for the first time to extract the lag time to the start of permeation, the lag time to start of the steady state, the diffusion coefficients, and the influx data for AuNPs permeating into the skin. PET could represent a highly valuable tool for the development of nanoparticle-containing topical formulations of drugs and cosmetics.

Analytical tools and evaluation strategies for nanostructured lipid carrier-based topical delivery systems

INTRODUCTION

The inception of nanostructured lipid carriers (NLCs) proved to be a revolutionary step toward the treatment of dermatological disorders. To uncover its true potential, it is imperative that the system be characterized and evaluated comprehensively.

AREAS COVERED

The present review has been written to furnish an in-depth account of analytical tools and evaluation procedures under one roof. Besides discussing the challenges of topical delivery and benefits of NLCs, the paper elaborates on their physicochemical characterization. Further, in vitro evaluation of NLCs for dermatological benefits, followed by their evaluation in a hydrogel/cream base is covered. Lastly, disease-specific evaluation of NLC-based formulations is presented.

EXPERT OPINION

The research endeavors for NLCs have largely focused on the fabrication of NLCs for different bioactives. However, scientific efforts should be aimed toward the lesser explored realm of NLCs, i.e. exploitation of analytical techniques, such as Parelectric spectroscopy, Electron Spin Resonance, and Nuclear Magnetic Resonance spectroscopy. NLCs have been proven for their potential to foster the therapeutic modalities applicable to cutaneous disorders. More attention needs to be devoted to their evaluation for disease-specific parameters. The futuristic steps must involve clinical studies, to lay the path for their commercialization.

Plant Exosome-like Nanovesicles: Emerging Therapeutics and Drug Delivery Nanoplatforms

Plant exosome-like nanovesicles, being innately replete with bioactive lipids, proteins, RNA, and other pharmacologically active molecules, offer unique morphological and compositional characteristics as natural nanocarriers. Furthermore, their compelling physicochemical traits underpin their modulative role in physiological processes, all of which have fostered the concept that these nanovesicles may be highly proficient in the development of next-generation biotherapeutic and drug delivery nanoplatforms to meet the ever-stringent demands of current clinical challenges. This review systemically deals with various facets of plant exosome-like nanovesicles ranging from their origin and isolation to identification of morphological composition, biological functions, and cargo-loading mechanisms. Efforts are made to encompass their biotherapeutic roles by elucidating their immunological modulating, anti-tumor, regenerative, and anti-inflammatory roles. We also shed light on re-engineering these nanovesicles into robust, innocuous, and non-immunogenic nanovectors for drug delivery through multiple stringent biological hindrances to various targeted organs such as intestine and brain. Finally, recent advances centered around plant exosome-like nanovesicles along with new insights into transdermal, transmembrane and targeting mechanisms of these vesicles are also elucidated. We expect that the continuing development of plant exosome-like nanovesicle-based therapeutic and delivery nanoplatforms will promote their clinical applications.

Visualisation of H2O2 penetration through skin indicates importance to develop pathway-specific epidermal sensing

Elevated amounts of reactive oxygen species (ROS) including hydrogen peroxide (H₂O₂) are observed in the epidermis in different skin disorders. Thus, epidermal sensing of H₂O₂ should be useful to monitor the progression of skin pathologies. We have evaluated epidermal sensing of H₂O₂ in vitro, by visualising H₂O₂ permeation through the skin. Skin membranes were mounted in Franz cells, and a suspension of Prussian white microparticles was deposited on the stratum corneum face of the skin. Upon H₂O₂ permeation, Prussian white was oxidised to Prussian blue, resulting in a pattern of blue dots. Comparison of skin surface images with the dot patterns revealed that about 74% of the blue dots were associated with hair shafts. The degree of the Prussian white to Prussian blue conversion strongly correlated with the reciprocal resistance of the skin membranes. Together, the results demonstrate that hair follicles are the major pathways of H₂O₂ transdermal penetration. The study recommends that the development of H₂O₂ monitoring on skin should aim for pathway-specific epidermal sensing, allowing micrometre resolution to detect and quantify this ROS biomarker at hair follicles.Graphical abstract.

Soft Malleable Vesicles: versatile carriers for efficient topical delivery of fungal therapeutics

Fungal infections have become a subject of great concern and the incidence of fungal infections is increasing, presenting an enormous challenge to healthcare professionals. Since most of the fungal infections are occurring over the skin, the treatment option of these infections always involves topical application. However, in topical delivery drug reaches into systemic circulation through different barriers of skin. Nevertheless, due to the low permeability, skin restricts the movement of many drugs. Hence, a delivery system is required, which deliver the medicament into the skin layers or through the skin and into the systemic circulation. Ethosomes or Soft malleable vesicles are the novel lipid vesicular carrier that offer improved skin permeability and efficient delivery due to their structure and composition. They contain high concentration of ethanol, which increases the fluidity of the skin. Therefore, in the present paper, we have explored the utility of ethosomal systems in the topical treatment of fungal infections. Structure, compositions types, mechanism and techniques of preparation of ethosome also discussed in the paper.

A niche in the spotlight: Could external factors critically disturb hair follicle homeostasis and contribute to inflammatory hair follicle diseases?

The anatomy of the hair follicle and the dynamics of its barrier provide a special space for interactions between macromolecules and the underlying tissue. Translocation across the hair follicle epithelium and immune recognition have been confirmed for proteins, nucleic acids, engineered particles, virus particles and others. Tissue responses can be modulated by pro-inflammatory stimuli as demonstrated in penetration and transcutaneous immunization studies. Even under physiological conditions, hair follicle openings are filled with exogenous material ranging from macromolecules, engineered particles to natural particles including diverse communities of microbes. The exposed position of the infundibulum suggests that local inflammatory insults could disturb the finely tuned balance and may trigger downstream responses that initiate or facilitate local outbreaks of inflammatory hair diseases typically occurring in close spatial association with the infundibulum as observed in cicatricial alopecia. The question as to how microbial colonization or deposition of contaminants on the surface of the hair follicle epithelium interact with the barrier status under the influence of individual predisposition, may help us understand local flare-ups of inflammatory hair diseases. Specifically, learning more about skin barrier alterations in the different types of inflammatory hair diseases and cross-talk with exogenous compounds could give new insights in this less explored aspect of hair follicle homeostasis. Such knowledge may not only be used to develop supportive measures to maintain a healthy scalp. It may have wider implications for our understanding on how external factors influence inflammation and immunological responses in the skin.

Hair follicle targeting with curcumin nanocrystals: Influence of the formulation properties on the penetration efficacy

Nanocrystals are a universal formulation approach for improved drug delivery of poorly water-soluble drug substances. Besides oral application, also topical application of the nanocrystals is feasible, because the increased kinetic solubility of the nanocrystals results in an increased concentration gradient, thus fostering passive, dermal penetration. Nanocrystals are also promising for targeting drug substances into the hair follicle. After penetration into the hair follicle, the nanocrystals could form a depot from which the active is released into the hair follicle. Thus, leading to a long-lasting and very efficient dermal drug delivery. The efficacy of nanocrystals to penetrate the hair follicles and the influence of the vehicle in which the nanocrystals are suspended was not yet investigated. Therefore, in this study curcumin nanocrystals with a size of about 300 nm were produced and incorporated into gels with different properties. The efficacy to penetrate the hair follicles, as well as the passive, dermal penetration, was assessed on the ex-vivo pig ear model. Nanocrystals were efficiently taken up by the hair follicles and reached the lower part of the infundibulum. This region is optimal for efficient drug delivery because the barrier of the lower infundibulum is not fully developed and thus more permeable, which results in a less hindered passive diffusion of drug substances. The penetration efficacy of the nanocrystals into the hair follicles was not affected by the different types of vehicles, which represented either oleogels or hydrogels that varied in viscosity as well as in the type and the concentration of the gelling agent. All gels possessed a shear-thinning flow behavior and it is hypothesized that all gels fluidized during the skin massage, whereby leading to similarly low viscosities than the aqueous nanosuspension and thus to similar penetration results. The passive, dermal penetration of curcumin was different for the different gels and the main driving parameter leading to good passive diffusion was caused by good skin hydrating properties of the vehicle. The best passive penetration was achieved from hydrogels that contained a humectant. However, the addition of the humectant reduced the efficacy of the nanocrystals to penetrate the hair follicle. Data so far, therefore, suggest that hair follicle targeting with nanocrystals that are suspended in water or simple, shear-thinning gels is highly effective. However, the addition of other excipients, e.g. humectants, to these vehicles might cause changes in the penetration profiles. More research in this regard is needed to understand these observations in more detail.

Enhanced transdermal delivery of curcumin nanosuspensions: A mechanistic study based on co-localization of particle and drug signals

Nanosuspensions have received much attention in enhanced transdermal delivery. However, the corresponding mechanisms have not been clarified. In particular, whether nanosuspensions can directly penetrate across the stratum corneum (SC) and what is the transdermal route for the enhanced penetration. Therefore, curcumin (CUR) was adopted in this study as a model drug, while an aggregation-caused quenching (ACQ) probe was physically embedded in CUR nanosuspensions, i.e., the CUR hybrid nanosuspensions (CUR-HNSs), for bioimaging. The ACQ properties enable identification of intact CUR-HNSs. The co-localization of particle and CUR signals was exploited to outline the translocation profiles of intact nanosuspensions as well as the cargoes. Three sizes of CUR-HNSs are prepared, which are spherical and amorphous. CUR is poor in transdermal transport even in propylene glycol solution, which was enhanced by nanosuspensions. Although 400 nm CUR-HNSs present higher steady state flux than 140 nm and 730 nm ones, the cumulative amount of permeated CUR is yet less than 2% of the applied dose at 12 h. Co-localization of CUR and ACQ probe signals indicates that CUR-HNSs can infiltrate into the SC layer and accumulate in the hair follicles. The intact CUR-HNSs cannot enter into the skin. On the contrary, CUR molecules diffuse into the whole skin tissues following dissolution of CUR-HNSs in the SC and the hair follicles. In conclusion, nanosuspensions are advantageous for transdermal delivery of poorly permeable drugs by filtrate into the SC and accumulate in hair follicles.

Noninvasive transdermal delivery of liposomes by weak electric current

Noninvasive transdermal drug delivery (NTDD) offers an exciting new method of administration relative to conventional routes, but is associated with some challenges. Liposomes are capable of encapsulating transdermally-unfavorable drugs. However, the horny layer of skin is a significant barrier that limits efficient transdermal delivery of liposomes. Iontophoresis using weak electric current (WEC) represents a NTDD technology. WEC treatment of liposomes applied to the skin surface improves transdermal penetration of encapsulated drugs by cooperative effects. In this review, we provide an overview of the application of WEC/liposomes for transdermal delivery of macromolecules and low molecular weight drugs. We compare the transdermal delivery and therapeutic efficiency of the combined system with conventional routes of administration and their individual use. We discuss a novel perspective on the mechanism of WEC-mediated transdermal delivery of liposomes, which suggests that WEC activates the intracellular signaling pathway for transdermal permeation and induces unique endocytosis in skin cells.

Optimized skin optical clearing for optical coherence tomography monitoring of encapsulated drug delivery through the hair follicles

Hair follicles (HF) represent a drug delivery reservoir for improved treatment of skin disorders. Although various particulate systems play an important role in HF-targeting, their optical monitoring in skin is challenging due to strong light scattering. Optical clearing is an effective approach allowing the increasing of particle detection depth in skin. The enhancement of optical probing depth (OPD) and optical detection depth (ODD) of particle localization using optical coherence tomography (OCT) was evaluated under application of various optical clearing agents (OCAs) together with skin permeability enhancers ex vivo in rats. Efficient OPD increasing was demonstrated for all investigated OCAs. However, skin dehydration under action of hyperosmotic agents led to the worsening of OCT-contrast in dermis decreasing the ODD. Lipophilic agents provided optical clearing of epidermis without its dehydration. The highest ODD was obtained at application of a PEG-400/oleic acid mixture. This OCA was tested in vivo showing beneficial ODD and OPD enhancement.

Metal nanomaterials: Immune effects and implications of physicochemical properties on sensitization, elicitation, and exacerbation of allergic disease

The recent surge in incorporation of metallic and metal oxide nanomaterials into consumer products and their corresponding use in occupational settings have raised concerns over the potential for metals to induce size-specific adverse toxicological effects. Although nano-metals have been shown to induce greater lung injury and inflammation than their larger metal counterparts, their size-related effects on the immune system and allergic disease remain largely unknown. This knowledge gap is particularly concerning since metals are historically recognized as common inducers of allergic contact dermatitis, occupational asthma, and allergic adjuvancy. The investigation into the potential for adverse immune effects following exposure to metal nanomaterials is becoming an area of scientific interest since these characteristically lightweight materials are easily aerosolized and inhaled, and their small size may allow for penetration of the skin, which may promote unique size-specific immune effects with implications for allergic disease. Additionally, alterations in physicochemical properties of metals in the nano-scale greatly influence their interactions with components of biological systems, potentially leading to implications for inducing or exacerbating allergic disease. Although some research has been directed toward addressing these concerns, many aspects of metal nanomaterial-induced immune effects remain unclear. Overall, more scientific knowledge exists in regards to the potential for metal nanomaterials to exacerbate allergic disease than to their potential to induce allergic disease. Furthermore, effects of metal nanomaterial exposure on respiratory allergy have been more thoroughly-characterized than their potential influence on dermal allergy. Current knowledge regarding metal nanomaterials and their potential to induce/exacerbate dermal and respiratory allergy are summarized in this review. In addition, an examination of several remaining knowledge gaps and considerations for future studies is provided.

Nanocarriers and Microcarriers for Enhancing the UV Protection of Sunscreens: An Overview

This review addresses a major question of importance to pharmaceutical scientists: how can novel drug delivery systems play a role in maximizing the UV protection of sunscreens? Because more and more people are being diagnosed with skin cancer each year than all other cancers combined, adequate sun protective measures are pivotal. In this context, the present review is to give an up-to-date overview on the different nanocarrier systems that have been explored so far for encapsulating different types of UV filters present on the market. The aim of these carrier systems is to prevent skin penetration and to enhance the photoprotective potential of sunscreen actives. For each supramolecular system, a brief description along with the studies, achievements, and pitfalls, on the type of UV actives inside them, ranging from classical UV filters to new generation of UV actives is given. A brief overview of UV filters encapsulated in microcarriers is also discussed.

Targeted photosensitizer delivery: A prospective approach to vitiligo photochemotherapy

Aim. In this work, the authors set out to develop an effective method for the intrafollicular delivery of “Ammi majus fructuum furocumarines” photosensitizer (AMFF) followed by UVA irradiation (λ = 320–400 nm). Materials and methods. The proposed delivery method consists in using calcium carbonate particles acting as AMFF carriers. In vivo monitoring of hair follicle filling was carried out via optical coherence tomography, as well as by means of analyzing epilated hair using confocal laser scanning microscopy. Following the administration of free and encapsulated AMFF to three healthy volunteers, the character of UVA-induced skin pigmentation was registered under dermatoscopic examination. Results. The obtained results demonstrate a profuse filling of hair follicles with calcium carbonate particles, thus confirming the possibility of intrafollicular photosensitizer delivery. It was established that exposure to UVA irradiation causes intense pigment accumulation in the area of AMFF carrier administration. Conclusion. The proposed method of the targeted photosensitizer delivery allows photochemical therapy to be improved.

A Simple Non-Invasive Approach toward Efficient Transdermal Drug Delivery Based on Biodegradable Particulate System

Transdermal administration via skin appendages enables both localized and systemic drug delivery, as well as minimizes incidental toxicity. However, the design of an appropriate effective method for clinical use remains challenging. Here, we introduce calcium carbonate-based carriers for the transdermal transportation of bioactive substances. The proposed system presents easily manufacturable biodegradable particles with a large surface area enabling a high payload ability. Topical application of submicron porous CaCO₃ particles in rats followed by the therapeutic ultrasound treatment results in their deep penetration through the skin along with plentiful filling of the hair follicles. Exploiting the loading capacity of the porous particles, we demonstrate efficient transportation of a fluorescent marker along the entire depth of the hair follicle down the bulb region. In vivo monitoring of the carrier degradation reveals the active dissolution/recrystallization of CaCO₃ particles, resulting in their total resorption within 12 days. The proposed particulate system serves as an intrafollicular depot for drug storage and prolonged in situ release over this period. The urinary excretion profile proves the systemic absorption of the fluorescent marker. Hence, the elaborated transdermal delivery system looks promising for medical applications. The drug delivery to different target regions of the hair follicle may contribute to regenerative medicine, immunomodulation, and treatment of various skin disorders. In the meantime, the systemic uptake of the transported drug opens an avenue for prospective delivery routes beyond the scope of dermatology.