Assessment of mastication with implications for oral rehabilitation: a review

Semi-automated generation of bone loss defects around dental implants and its application in finite element analysis

This study aimed to develop an algorithm for modelling bone loss defects in a given mandibular geometry, with a user-defined depth, width, place, and defect type. The algorithm was implemented using Grasshopper and models with different bone loss types and depths around a dental implant were built. The models were used in a finite element analysis (FEA) to predict the stresses in peri-implant bone. The FEA showed that the stresses in peri-implant bone depend primarily on the depth of bone loss, whereas the type of bone loss showed no major influence.

Effects of a hollow pontic design with various wall thicknesses on the axial internal fit and failure load of 3D printed three-unit resin prostheses

STATEMENT OF PROBLEM

A 3-dimensionally (3D) printed 3-unit interim fixed dental prosthesis (FDP) undergoes inward polymerization shrinkage to the pontic region, leading to nonuniform internal fit and improper accuracy. Whether axial wall thickness influences accuracy is unclear.

PURPOSE

The purpose of this in vitro study was to analyze the axial internal fit and failure load associated with a hollow pontic design of varying wall thicknesses in stereolithography (SLA) 3D printed 3-unit interim FDPs.

MATERIAL AND METHODS

A master model for a 3-unit interim FDP with 2 implant abutments was designed. Two master models were produced by using milling and direct metal laser sintering (DMLS). Sixty SLA 3D printed specimens were produced with a hollow pontic design of 4 wall thicknesses (solid and 2.5, 2.0, and 1.5 mm). Fifteen milled specimens were produced with a solid pontic design. The axial internal fit in the coronal section was measured in terms of intaglio and cameo mid-axial wall areas relative to the abutments by using microcomputed tomography (μCT). The failure load was measured by using a universal testing machine at a loading rate of 1 mm/minute. For statistical analysis, parametric tests were performed (α=.05). Horizontal μCT sections were compared qualitatively, and failure patterns were categorized among groups.

RESULTS

The hollow pontic designs with 2.0- and 1.5-mm wall thicknesses presented significantly lower mean intaglio mid-axial gaps than the solid pontic design (P<.001) and similar intaglio and cameo mid-axial gaps in the horizontal μCT sections. The hollow pontic design with the 2.0-mm wall thickness had a significantly higher mean failure load than that with the 1.5-mm wall thickness (P<.001) and a statistically similar mean failure load to that of the solid pontic design (P=.549). As the wall thickness of the hollow pontic decreased from 2.5 to 1.5 mm, the ratio of pontic fracture to complete fracture of the prosthesis increased.

CONCLUSIONS

For SLA 3D printed 3-unit interim FDPs, axial internal fit was enhanced by the application of an appropriate hollow pontic design. Considering both the structural strength and fit, a hollow pontic design with a 2.0-mm wall thickness should be selected.

Oral health self-perception, maximum bite force and masticatory efficiency in patients with overdentures with different attachment systems-A crossover study

BACKGROUND

The literature is unclear about how the different attachment systems for overdentures impact the maximum bite force, the masticatory efficiency and how this impact in the oral health self-perception in patients.

OBJECTIVE

To evaluate the effect of two attachment systems (O-ring and Locator) for mandibular overdenture using single implant on quality of life, maximum bite force (BF) and masticatory efficiency (ME).

METHODS

Twenty-eight completely edentulous denture wearers with a mandibular symphysis implant were randomly selected and allocated into two groups in a crossover study, considering O-ring and Locator attachment types. The quality of life and self-perception of oral health were assessed using the Oral Health Impact Profile (OHIP-Edent) and Geriatric Index of Determination of Oral Health (GOHAI) questionnaires, respectively. BF was measured using a gnathodynamometer and ME by chewing silicone cubes and almonds in different numbers of cycles.

RESULTS

There was no difference between the attachment systems about self-perceived oral health and impact on quality of life (p > .05). The O-ring-type system obtained a significantly higher BF than the locator-type system (p = .04). Regardless of the food chewed, no statistically significant difference was observed with the type of attachment (p > .05). The ME was directly proportional to the masticatory cycles only for almonds (p < .01).

CONCLUSIONS

Locator and O-ring inserts had a similar impact on patients' quality of life, self-perception of oral health and ME. Additionally, the O-ring system exhibited superior properties in the BF.

Influence of denture-bearing conditions on masticatory function and patient-reported outcomes measures

PURPOSE

To investigate the influence of different denture-bearing conditions on the masticatory function and patient-reported outcome measures (PROMs) of complete denture wearers.

METHODS

Sixty edentulous patients were selected and allocated into two groups according to the American College of Prosthodontics' (ACP) classification: non-atrophic (NAT) (Classes I and II) (n = 24) and atrophic (AT) (Classes III and IV) (n = 36). All patients received new complete dentures (CDs). The objective variables (masticatory performance and swallowing threshold) were assessed as well as the PROMs (oral health-related quality of life (OHIP-EDENT), patient satisfaction) and quality of the prosthesis, at baseline (using the old CD) and after 4 months new prostheses use. Data were analyzed by Mann-Whitney test followed by the Generalized Equations Estimation (GEE), linear regression and Chi-square test.

RESULTS

Higher masticatory performance was observed in the NAT group (p < .05) for both time points, baseline and after 4 months. However, compared to baseline, both groups showed significant masticatory improvement after 4 months (p < .05). Satisfaction and overall quality of life improved after 4 months with no difference between groups (p > .05). Regarding the quality of the CD, baseline results were significantly (p < .05) lower in the AT group, but after 4 months, no significant differences were found between groups and in intragroup analysis (p > .05).

CONCLUSIONS

The denture-bearing conditions seems to impact masticatory function, but the PROMs are barely affected.

Mechanical strength of stock and custom abutments as original and aftermarket components after thermomechanical aging

OBJECTIVES

The study aimed to assess the impact on the mechanical strength and failure patterns of implant-abutment complexes of choosing different abutment types, designs and manufacturers, aiding in selecting the optimal restorative solution. Stock and custom abutments from original and aftermarket suppliers were subjected to thermomechanical aging.

MATERIAL AND METHODS

Stock and custom abutments from the implant manufacturer (original) and a aftermarket supplier (nonoriginal) were connected to identical implants with internal connection. Custom abutments were designed in a typical molar and premolar design, manufactured using the workflow from the respective suppliers. A total of 90 implants (4 mm diameter, 3.4 mm platform, 13 mm length) equally divided across 6 groups (three designs, two manufacturers) underwent thermo-mechanical aging according to three different regimes, simulating five (n = 30) or 10 years (n = 30) of clinical function, or unaged control (n = 30). Subsequently, all samples were tested to failure.

RESULTS

During aging, no failures occurred. The mean strength at failure was 1009N ± 171, showing significant differences between original and nonoriginal abutments overall (-230N ± 27.1, p < .001), and within each abutment type (p = .000), favoring original abutments. Aging did not significantly affect the failure load, while the type of abutment and manufacturer did, favoring original and custom-designed abutments. The most common failure was implant bending or deformation, significantly differing between original and nonoriginal abutments and screws. All failure tests resulted in clinically unsalvageable implants and abutments.

CONCLUSIONS

Within the limitations of this study, original abutments exhibited a higher mechanical strength compared to the nonoriginal alternative, regardless of the amount of simulated clinical use. Similarly, custom abutments showed higher mechanical strength compared to stock abutments. However, mechanical strength in all abutments tested was higher than average chewing forces reported in literature, thus components tested in this study can be expected to perform equally well in clinical situations without excessive force.

Pain-free bite force in a healthy population: Within-session test-retest reliability in different sitting positions

BACKGROUND

Pain-free bite force (PFBF) is a promising measure to evaluate bite function in temporomandibular disorders (TMDs), yet the reliability of the measure is unknown.

OBJECTIVES

Establish the (1) within-session test-retest reliability of PFBF in a healthy population for a single and mean of three trials in supported and unsupported sitting; (2) standard error of measurement (SEM) and minimal detectable change (MDC).

METHODS

Thirty healthy participants (n = 15 female, mean [SD] age = 34.4 [11.0] years) completed two sessions (30-60 min apart) comprising three PFBF trials on each side, in both supported and unsupported sitting, to provide data for 60 (30 participants × two sides) test-retest assessments. Test-retest reliability for the first trial and mean of three trials in each position were determined using intraclass correlation coefficients (ICCs), before calculating the corresponding SEM and MDC for males (M) and females (F) respectively.

RESULTS

Within-session reliability was considered excellent for a single trial in supported sitting (ICC = 0.85; SEM M/F = 99/84 N; MDC M/F = 275/232 N) and unsupported sitting (ICC = 0.91; SEM M/F = 72/59 N, MDC M/F = 200/163 N), and for a mean of three trials in supported sitting (ICC = 0.89; SEM M/F = 66/79 N, MDC M/F = 182/220 N) and unsupported sitting (ICC = 0.92; SEM M/F = 64/59 N, MDC M/F = 177/164 N).

CONCLUSION

Single and a mean of three trials in supported and unsupported sitting appear reliable methods to measure PFBF in a healthy population. Testing PFBF using a mean of three trials in unsupported sitting appears superior over other methods though due to higher test-retest reliability, and lower SEM and MDC. Future studies should examine the reliability of PFBF in TMD populations.

Influence of changing dentition on food texture preferences and perception of eating difficulty in Australian children

The transition from primary to permanent dentition is an important phase in children's oral development, yet its impact on texture perception and food acceptance are less explored. This study aimed to investigate how changing dentition and tooth loss influence texture preferences and perception of eating difficulty among children aged 5 to 12 years. Children (n = 475) completed a forced-choice questionnaire featuring drawings of six food pairs, each available in hard or soft texture, and reported whether they had started losing primary teeth and the number of tooth gaps present. They also tasted four samples: chocolate snacks (cake and biscuits) and cheddar cheese (grated and cubes), evaluating their perceived eating difficulty and liking for each sample. Analysis of questionnaire responses showed a general preference for softer food textures among children, with a 36% probability of choosing hard foods. Preferences were not related to child's dental state, including primary teeth loss (p = .13) or number of tooth gaps (p = .45). In the taste test, chocolate biscuits and cheese cubes were perceived as significantly more difficult to eat than chocolate cake and grated cheese, respectively (both p < .0001). Children with more than two tooth gaps reported greater eating difficulty for chocolate biscuits and cheese cubes compared to children with fewer or no tooth gaps. This study demonstrated that children's texture preferences for hardness of foods remained consistent during dentition change, while their perception of eating difficulty could vary based on their dental state at specific points in time.

Comparison of perceived masticatory ability in completely edentulous patients treated with thermoplastic complete denture versus single implant-retained mandibular overdenture: a single-center prospective observational study

Background

This study aimed to compare the perceived masticatory ability (PrMA) in completely edentulous patients (EDPs) with thermoplastic conventional complete dentures (CDs) versus single implant-retained mandibular overdentures.

Methods

The current study was conducted in the outpatient Prosthodontic Clinic, Faculty of Dental Medicine, Al-Azhar University, Cairo, Egypt. PrMA was evaluated in 45 completely edentulous patients (46% males, mean age 50.4 ± 4.7 years). Each patient received a thermoplastic PMMA complete denture (Polyan IC TM Bredent GmbH & Co.KG, Germany). The PrMA was evaluated at one-month and six-month intervals of denture use. An immediate loading single implant was placed into the mid-symphyseal for each patient, and the denture was adjusted. Subsequently, the PrMA was reevaluated after one month and six months. The data were collected and statistically analyzed using the SPSS@V25 to assess the changes in PrMA.

Results

The PrMA demonstrated improvement after six months of thermoplastic conventional denture use. However, this improvement was not statistically significant (p = 0.405). In addition, the PrMA showed a substantial increase following a single implant placement at one and six months (p < 0.001) of the overdenture use compared to the conventional denture. The PrMA insignificantly improved (p = 0.397) after six months of the single implant retained overdenture use.

Discussion

The study's findings indicate that using immediate loading single implant-retained mandibular overdentures significantly improved PrMA in completely edentulous patients.

The effect of early childhood caries on chewing function and tolerated food texture levels in preschool children

BACKGROUND

The early form of caries can affect solid food consumption.

OBJECTIVE

The aim of the study was to evaluate the effect of oral health status on chewing performance, and tolerated food texture among preschool children suffering from early childhood caries (ECC).

METHODS

A cross-sectional study was conducted with a sample of 109 children aged between 3 and 6 years, who were allocated to three groups (severe-ECC (s-ECC), ECC and control) on the basis of their caries. Chewing function was evaluated by using the 'Karaduman Chewing Performance Scale (KCPS)' and the Turkish version of the 'Mastication Observation and Evaluation instrument (T-MOE)', and the tolerated food texture was determined by the 'International Dysphagia Diet Standardization Initiative (IDDSI)'. Carious lesions, oral hygiene and gingival health status were evaluated by using the 'decayed, missing, filled tooth/surface indices (dmft/s)', 'plaque and gingival indices'; respectively.

RESULTS

A total of 56 children (51.4%) had s-ECC, 39 (35.8%) had ECC and 14 (12.8%) had no caries (control group). KCPS showed that 26 (86.7%) children suffering from s-ECC were at level 1, and 11 (100%) children were at level 2. Seven (100%) children with s-ECC had IDDSI level-5. All children with healthy oral status had IDSSI level-7. Compared to the ECC and control groups, the s-ECC group had significantly lower scores from the T-MOE total and subscale scores (p < .001).

CONCLUSION

The evaluation of chewing performance during routine dental examinations of children with ECC (especially s-ECC) may considerably contribute to the early diagnosis of chewing problems and the provision of necessary oral rehabilitation.

Exploring botulinum toxin's impact on masseter hypertrophy: a randomized, triple-blinded clinical trial

The present study aimed to assess the effectiveness and functional adverse effects of a single and multiple injections of botulinum toxin A (BoNT-A) for masseter hypertrophy (MH). Twenty-six women complaining about lower third facial enlargement due to MH, received 75 U of BoNT-A (abobotulinum toxin) in each masseter muscles. After 3 months, patients were randomly assigned to receive a second treatment session of Saline Solution: (G1; n = 11) or BoNT-A: (G2; n = 12). Muscle thickness (ultrasound), electrical activity (electromyography; EMG), masticatory performance, and subjective perception of MH were evaluated. Follow-up was performed at 1, 3 and 6 months. Muscle thickness, EMG activity, and masticatory performance were analyzed using ANOVA two-way and Sidak test as post-hoc. Masticatory performance was analyzed by the Friedman's test and Mann-Whitney test. Regarding inter-groups comparisons, there was a significant decrease in the left masseter muscle thickness in the G2 group at the 6 month follow-up (p < 0.02). For EMG, significant differences were evident at the 6 month assessment, with higher masseter activity for G1 (p < 0.05). For masticatory performance, no significant differences were observed throughout the study (p > 0.05) and a higher improvement in subjective perception of MH was observed in the 1 month follow-up for G2 (p < 0.05). In conclusion, BoNT-A is effective for MH, however multiple injections cause functional adverse effects in masseter muscle.

Four-year assessment of masticatory function in mandibular overdenture wearers: A randomised clinical trial comparing two to four implants to retain the prosthesis

BACKGROUND

Limited data exist on the mid- to long-term masticatory capacity of mandibular overdenture (IOD) wearers, particularly regarding the use of posterior implants to retention.

OBJECTIVES

To periodically evaluate mastication of IOD wearers, comparing the effectiveness of two to four implants to retain the prosthesis.

METHODS

In a randomised controlled clinical trial, 20 complete edentulous patients (14 women), aged 51-84 years (mean age 69.1 ± 9.6), received new bimaxillary complete dentures (CD). After adaptation, baseline measurements of masticatory performance (X50) and swallowing threshold were conducted using the sieving method. Patients were then randomly assigned to groups: control (two intra-foraminal regular implants) and experimental (two intra-foraminal regular implants and two extra-short posterior implants) (n = 10 each). After 4 months, implants were splinted, and a new mandibular IOD was fabricated with bar/clip retention. Mastication was reassessed after 6, 12, and 48 months, and data analysed with repeated measures ANOVA and Sidak's post hoc (α = 0.05).

RESULTS

Despite a loss of two patients per group, masticatory performance significantly improved after mandibular IOD installation (p = .031) in both groups (p = .670). A second improvement was observed after 6 months (p = .027), with no subsequent changes (p > .05). Swallowing threshold improvements were noted with IOD, and no discernible differences between groups were observed (p > .05).

CONCLUSION

Masticatory function significantly improved after mandibular IOD installation, with the number of implants demonstrating minimal influence.

CLINICAL TRIAL REGISTRATION

The present study was not registered in a public database, as mandated. It is important to note that the recommendation for registration was initiated in 2017 by the Committee of Medical Journal Editors, while patient inclusion in the research took place in 2016. Given that the data presented in this manuscript cover a follow-up period of up to 4 years post-surgical intervention, delayed registration was not feasible.

Evaluation of the Association of Chewing Function and Oral Health-Related Quality of Life in a Population of Individuals Aged ≥ 45 Years and Residing in Communities in Switzerland: A Cross-Sectional Study

PURPOSE

To analyse the association of masticatory performance and oral health-related quality of life in a representative population of individuals residing in communities in Switzerland aged ≥ 45 years.

MATERIALS AND METHODS

In total, 100 subjects completed two dedicated and validated questionnaires on their demographic data and the Geriatric Oral Health Assessment Index. A mixing ability test was performed for assessing masticatory performance. The qualitative analysis of the test was performed by categorizing the images into five categories, while the quantitative analysis was performed via a validated custom-made software.

RESULTS

Sixty-six samples could be analysed. Participants younger than 65 years of age showed significantly less frequent chewing deficiencies (17%) compared to those 65 years and older (50%, p < 0.01). However, retired participants had chewing deficiencies significantly more frequently (8%) compared to workers (51%, p < 0.01). A statistically significant positive association of having chewing deficiency was found between employment status (p < 0.01) and the presence of restorations (p = 0.04), while GOHAI did not show any statistically significant association. Overall, the enrolled subjects displayed moderate chewing function. Masticatory performance was positively associated with the number of present restorations.

CONCLUSIONS

The enrolled subjects residing in communities in Switzerland aged ≥ 45 years displayed moderate chewing function. Their masticatory performance was positively associated with the number of present restorations but not associated with oral health related quality of life (GOHAI).

The effects of different grading approaches in additively manufactured dental implants on peri-implant bone stress: A finite element analysis

Additive manufacturing enables local grading of the stiffness of dental implants through targeted adjustment of the manufacturing parameters to meet patient specific requirements. The extent to which such a manufacturing approach affects the interaction between the implant body and the surrounding bone, and what grading is optimal, is currently insufficiently investigated. This study investigates the effect of different Young's modulus grading approaches on stresses in the peri-implant bone via finite element analysis. The implant geometry was kept constant and in the case of the implant a node-dependent elastic modulus was assigned. In this way, a vertical, a radial and three torus based grading approaches were created and examined. A load was then applied directly to the occlusal surface of the implant crown. It was found that a local grading utilizing a torus shape was most favourable in terms of an effective stress peak reduction. The best torus shape tested achieved a 22 % reduction of maximum principal stress and 6 % reduction of minimum principal stress compared to the uniform material. In clinical settings, this may provide benefits in situations of overload. Based on the results, a graded stiffness in dental implants appears to be of interest for developing advanced, patient-specific implant solutions.

Masticatory function in edentulous patients wearing implant overdentures after graftless maxillary sinus membrane elevation

BACKGROUND

Graftless sinus floor augmentation shows good results in bone gain, radiology and implant survival. Clinically, this technique can be recommended as an alternative to conventional procedures using augmentation materials.

OBJECTIVES

This study aims to assess masticatory performance, masticatory ability and patient satisfaction after graftless sinus floor augmentation.

METHODS

The study group consisted of patients who had received a graftless sinus lift procedure in a split-mouth design and was compared to patients with maxillary implant-supported overdentures without augmentation and a natural dentition group. To assess objective masticatory performance, the mixing ability test was performed. Three questionnaires were used to assess patient reported outcomes related to mastication and patient satisfaction.

RESULTS

Each group included ten patients. Both the graftless sinus lift group and the edentulous control group had a worse masticatory performance compared to the natural dentition group. Masticatory ability, measured by patient reported outcomes, was not different between the graftless sinus floor augmentation group and implant-retained overdentures group without augmentation, but the natural dentition group showed better results. Thereby, the better the masticatory performance in patients with a graftless sinus membrane elevation the better the patient satisfaction for 'prosthesis', 'appearance of prostheses', 'speech' and 'mastication and eating'.

CONCLUSIONS

Patients with implant-supported overdentures show inferior masticatory function compared to those with natural dentition. There were no significant differences in masticatory performance between patients with implant-retained overdentures, with or without graftless augmentation. The decision on the preferred procedure should consider additional factors such as anatomical, surgical-technical aspects and patient's preferences.

Factors associated with age-related changes in oral diadochokinesis and masticatory function in healthy old adults

BACKGROUND

This cross-sectional study aimed to identify factors associated with age-related changes in masticatory performance (MP) and oral diadochokinesis (ODK) and to provide normal values in healthy old adults for the diagnosis of oral frailty.

METHODS

A total of 385 participants were divided into three age groups (Gr1-3): 20-64 years, 65-74 years, and ≥ 75 years. To investigate tongue-lip motor function, ODK was assessed as the number of repetitions of the monosyllables /pa/ta/ka/. Four questionnaires were used to assess subjective masticatory ability, cognitive ability, and psychological status. MP, bite force, and occlusal area were tested to assess dynamic objective masticatory function, and the number of remaining teeth and functional tooth pairs were determined to assess static objective masticatory function. Handgrip strength (HG), oral dryness, and tongue pressure (TP) were assessed to identify influencing factors. Intergroup differences were evaluated by ANOVA and the Kruskal‒Wallis test, and correlations between ODK and orofacial factors were evaluated.

RESULTS

This study revealed significant age-related declines in TP, HG, and ODK, especially after 65 years of age. Factors affecting MP were posterior teeth, the Eichner index, bite force, occluding area, the Korean Mini-Mental State Examination (KMMSE) score, and ODK. Each ODK syllable was associated with different factors, but common factors associated with ODK were MP, HG, and PHQ-9 score. For the syllables /pa/ta/, the Eichner Index, TP, and oral dryness were also associated. For the syllable /ka/ in Gr3, MP, TP, HG, oral dryness, and the KMMSE score were associated.

CONCLUSIONS

These results could provide practical guidelines for oral rehabilitation in old adults and contribute to improving the understanding of age-related changes in oral function and the multidimensional nature of masticatory dynamics.

Association between occlusal supports and nutritional status in older adults: A systematic review

Background/purpose

Impaired masticatory performance results in nutritional deficiencies in older adults. This systematic review aims to investigate the following clinical question (CQ): Do occlusal supports impact nutritional intake or nutritional status in older individuals?

Materials and methods

An extensive systematic literature search was performed to summarize the currently available knowledge to address the CQ. The cohort and intervention studies with participants of ≧60 years old or a mean age of 65 years performed before May 2021 were included. Studies were required to measure the parameters related to occluding tooth pairs/occlusal units and food/nutrient intake and/or nutritional status. Bias risk was assessed using the Risk of Bias Assessment Tool for Nonrandomized Studies.

Results

After an independent screening of 1130 initial records, 24 reports from 22 studies were included. Participants (n = 8684) in the included studies were mainly residents of nursing homes or community-dwelling individuals. Following the assessment of bias risk, it is revealed that all studies had methodological weaknesses. Over half of the studies concluded that there was an association between occlusal support and nutritional intake or status. However, it was also revealed that various confounding factors are involved in the association between occlusal support and nutrition.

Conclusion

This systematic review concludes that occlusal support might be associated with nutritional intake or nutritional status in the older population, although there are methodological limitations of each study. The evidence is still insufficient, and more well-designed studies are required.

Chewing efficiency and contact area discrepancies in Angle's class I and II malocclusion: A comparative study

Objective

The study aimed to assess and compare both the chewing efficiency and the contact area between class I and class II of Angle's malocclusions.

Material and methods

A total of 120 individuals aged between 19 and 30 years were examined and were divided into two groups according to Angle's class (Class I and class II). The chewing efficiency was quantified using the ViewGum software and two-colored chewing gum. The contact area was quantified using modeling wax and MATLAB software. All data were collected, then, analyzed using SPSS software 21. Data normality was checked through kurtosis test. Descriptive results were calculated. Matched sample t-tests were used to compare chewing efficiency measurements between right and left sides. Independent t-tests were used to compare chewing efficiency and the contact area between class I and class II of Angle's malocclusions. Linear regression and Pearson correlation were used to assess the correlation between chewing efficiency and the contact area. The significance level was fixed at p = 0.05.

Results

For group 1, the mean hue value on both sides was 0.086 ± 0.058. For group 2, it was 0.095 ± 0.055. The difference between both groups was statistically significant (p = 0.03). For group 1, the mean contact area was 49.91 ± 21.47 mm2. For group 2, it was 51.42 ± 19.76 mm2. The difference was statistically not significant (p = 0.4). The correlation between the contact area and the chewing efficiency in both groups was statistically significant and it was negative (in class I p = 0 and R = -0.616; in class II p = 0.01 and R = -0.408).

Conclusion

The Chewing is better for patients with Angle's Class I malocclusion. The contact area is higher. Larger occlusal contact area leads to higher masticatory efficiency. Further studies should be conducted.

Preventing stress singularities in peri-implant bone - a finite element analysis using a graded bone model

In finite element analysis bone is often treated as two-layered material that has a discontinuity between the cortical and cancellous bone, which leads to a singularity and incorrect stresses. The goal of this study was to eliminate this singularity and to create a more realistic representation of bone which also considers the transition zone between cortical and cancellous bone as observed in natural bone. This was achieved by modelling bone as a graded material and inserting node-specific values for Young's modulus in the finite element simulation, whereas the transition zone thickness was derived from a CT scan. The modelling was performed semi-automatically, and the maximum principal stresses of the new approach were compared to those of a conventional approach. The new approach was found to effectively avoid singularities and provides more accurate predictions of stress in areas of the bone transition zone. As the approach is automatable and causes rather small overhead it is recommended for use in future work, when the problem at hand requires evaluating stresses close to the former singularity.

Masticatory performance, self-perception of oral health, oral health-related quality of life and nutritional status of completely edentulous elderly patients submitted to different rehabilitation treatments: A cross-sectional study

BACKGROUND

The impact of treatments on completely edentulous individuals on masticatory performance (MP), oral health-related quality of life (OHRQoL), nutritional status (NS) and socio-economic profile (SP) is unclear in the literature.

OBJECTIVE

To compare the MP, OHRQoL, NS and SP of totally edentulous elderly users of bimaxillary complete dentures (CD) and users of lower implant-supported fixed complete dentures (IFCD).

METHODS

Forty participants were allocated into groups according to rehabilitation treatment (n = 20): bimaxillary CD (G1) and lower IFCD, and upper CD (G2). The evaluation of MP used almonds by the method of sieves. Four questionnaires (Geriatric Oral Health Assessment Index-GOHAI and Oral Health Impact Profile Edent-OHIP-Edent, Brazilian Economic Classification Criteria-ABEP and Mini Nutritional Assessment-MNA) were applied to assess the OHRQoL, SP and NS of the elderly, respectively. After evaluating the statistical assumptions, the Mann-Whitney (α = .05) test was applied to compare the groups regarding MP, OHRQoL, NS and SP. Spearman's correlation (α = .05) was performed to verify the correlation between the MP, the OHRQoL and the NS of the participants.

RESULTS

G2 showed better MP (p < .05) in all masticatory cycles, OHRQoL (p < .05) and NS than the G1. However, the participants' self-perception of oral health did not differ between groups (p < .05). A moderate negative correlation was found between MP and OHRQoL for 40 masticatory cycles (r2  = -0.513; p = .001).

CONCLUSION

Individuals rehabilitated with IFCD had a higher average monthly family income and achieved superior behaviour in MP and OHRQoL, in addition to lower risks of malnutrition when compared to individuals using bimaxillary CD.

Biomechanical behavior of molars restored with direct and indirect restorations in combination with deep margin elevation

STATEMENT OF PROBLEM

The existing knowledge is insufficient for comprehending the fatigue survival and fracture resistance of molars that have deep approximal direct and indirect restorations, whether with or without deep margin elevation (DME).

PURPOSE

The aim of this laboratory and in silico study is to investigate the fatigue survival, fracture strength, failure pattern and tooth deformation of molars restored with DME in combination with a direct or indirect restoration.

MATERIAL AND METHODS

This study utilized 45 extracted sound human molars, divided into three groups (n = 15). Standardized 100% inter-cuspal inlay preparations were performed, extending 2 mm below the CEJ and immediate dentin sealing (IDS) was applied. Group 1 (Co_1) was restored with direct composite; Group 2 (Hyb_2) with a 2 mm DME of direct composite and a glass-ceramic lithium disilicate restoration; Group 3 (Cer_3) a glass-ceramic lithium disilicate restoration. All specimens were exposed to a fatigue process involving thermal-cyclic loading (50N for 1.2 × 106 cycles at 1.7 Hz, between 5 and 55 °C), if teeth survived, they were fractured using a load-to-failure test and failure types were analyzed. Finite element analysis (FEA) was conducted to assess tooth deformation and tensile stress in the restorations. Statistical evaluation of fracture strength was conducted using the Kruskal-Wallis test. Fisher's exact test was utilized to analyze the fracture types and repairability. A statistical significance level of α < 0.05 was set for all analyses.

RESULTS

All specimens successfully withstood the fatigue testing procedure, and no statistically significant differences in fracture strength were observed among the three groups (P > 0.05). The Fisher's exact test indicated a significant association between the restorative material and fracture type (F2 = 18.315, df = 2, P = 0.004), but also for repairability (F2 = 13.725, df = 2, P = 0.001). Crown-root fractures were significantly more common in the Cer_3 group compared to the Co_1 group (P = 0.001) and the Co_1 group had significantly more repairable fractures (F2 = 13.197, df = 2, P = 0.001). FEA revealed comparable outcomes of deformation among models and higher maximum tensile stress on models with higher frequency of catastrophic failures.

CONCLUSIONS

All tested restoration materials exhibited comparable fatigue survival and fracture strength in this laboratory and in silico study. However, it is important to recognize the potential for more severe and irreparable fractures when opting for deeply luted glass-ceramic inlay restorations in clinical practice. In such cases, it would be prudent to consider the alternative option being a direct composite approach, because of its more forgiving fracture types and repairability.

CLINICAL IMPLICATIONS

Molars with deep approximal direct and indirect restorations, whether with or without DME, are comparable in their fatigue survival and fracture resistance to withstand intra-oral forces. Deep direct restorations exhibit more repairable fractures compared to deeply luted glass-ceramics.

Association of tooth location, occlusal support and chewing ability with cognitive decline and incident dementia

AIM

Emerging evidence suggests association of tooth loss with impaired cognition. However, the differential effects of anterior versus posterior tooth loss, occlusal support loss and chewing ability are not considered comprehensively.

MATERIALS AND METHODS

We conducted cross-sectional (N = 4036) and longitudinal analyses (N = 2787) on data from Health 2000 and 2011 Surveys for associations of posterior occlusal support loss, anterior versus posterior tooth loss, and chewing ability with baseline cognition and 11-year cognitive decline. Additionally, 15-year incident dementia risk was investigated (N = 4073).

RESULTS

After considering relevant confounders and potential reverse causality bias, posterior occlusal support loss significantly increased dementia risk across all categories indicative of posterior occlusal support loss (hazard ratios [HRs] between 1.99 and 2.89). Bilateral inadequate posterior occlusal support was associated with 11-year decline in overall cognition (odds ratio [OR] = 1.48:1.00-2.19), and unilateral inadequate posterior occlusal support with total immediate (OR = 1.62:1.14-2.30) and delayed recall decline (OR = 1.45:1.03-2.05). Moreover, posterior tooth loss was associated with dementia (HR = 2.23:1.27-3.91) and chewing ability with total immediate decline (OR = 1.80:1.04-3.13).

CONCLUSIONS

Posterior tooth and occlusal support loss significantly increases dementia risk. The impact of posterior occlusal support loss appears to be dose-dependent, and this effect is distinct from that of dentures. Dental healthcare services should be particularly attentive to the state of posterior dentition. Further studies exploring possible mechanisms are warranted.

Proprioceptive innervation of the human lips

The objective of this study was to analyze the proprioceptive innervation of human lips, especially of the orbicularis oris muscle, since it is classically accepted that facial muscles lack typical proprioceptors, that is, muscle spindles, but recently this has been doubted. Upper and lower human lips (n = 5) from non-embalmed frozen cadavers were immunostained for detection of S100 protein (to identify nerves and sensory nerve formations), myosin heavy chain (to label muscle fibers within muscle spindles), and the mechano-gated ion channel PIEZO2. No muscle spindles were found, but there was a high density of sensory nerve formations, which were morphologically heterogeneous, and in some cases resemble Ruffini-like and Pacinian sensory corpuscles. The axons of these sensory formations displayed immunoreactivity for PIEZO2. Human lip muscles lack typical proprioceptors but possess a dense sensory innervation which can serve the lip proprioception.

Ultrathin lithium disilicate and translucent zirconia crowns for posterior teeth: Survival and failure modes

PURPOSE

To evaluate the reliability and failure modes of ultrathin (0.5 mm) lithium disilicate, translucent and ultra-translucent zirconia crowns for posterior teeth restorations.

MATERIALS AND METHODS

Fifty-four mandibular first molar crowns of three ceramic materials: (1) Lithium disilicate (e.max CAD, Ivoclar Vivadent), (2) 3Y-TZP (Zirconn Translucent, Vipi), and (3) 5Y-PSZ (Cercon XT, Dentsply Sirona), with 0.5 mm of thickness were milled and cemented onto composite resin abutments. Eighteen samples of each group were tested under mouth-motion step-stress accelerated life testing in a humid environment using mild, moderate, and aggressive profiles. Data was subjected to Weibull statistics. Use level curves were plotted and reliability was calculated for a given mission of 100,000 cycles at 100, 200, and 300 N. Fractographic analyses of representative samples were performed in scanning electron microscope.

RESULTS

Beta (β) values suggest that failures were dictated by material's strength for lithium disilicate and by fatigue damage accumulation for both zirconias. No significant differences were detected in Weibull modulus and characteristic strength among groups. At a given mission of 100,000 cycles at 100 N, lithium disilicate presented higher reliability (98% CB: 95-99) regarding 3Y-TZP and 5Y-PSZ groups (84% CB: 65%-93% and 79% CB: 37&-94%, respectively). At 200 N, lithium disilicate reliability (82% CB: 66%-91%) was higher than 5Y-PSZ (20% CB: 4%-44%) and not significantly different from 3Y-TZP (54% CB: 32%-72%). Furthermore, at 300 N no significant differences in reliability were detected among groups, with a notable reduction in the reliability of all materials. Fractographic analyses showed that crack initiated at the interface between the composite core and the ceramic crowns due to tensile stress generated at the intaglio surface.

CONCLUSIONS

Ultrathin lithium disilicate crowns demonstrated higher reliability relative to zirconia crowns at functional loads. Lithium disilicate and zirconia crown's reliability decreased significantly for missions at higher loads and similar failure modes were observed regardless of crown material. The indication of 0.5 mm thickness crowns in high-load bearing regions must be carefully evaluated.

CLINICAL SIGNIFICANCE

Ultraconservative lithium disilicate and zirconia crowns of 0.5 mm thickness may be indicated in anterior restorations and pre-molars. Their clinical indication in high-load requirement regions must be carefully evaluated.

Natural History of Mandibular Function in Spinal Muscular Atrophy Types 2 and 3

Background

Hereditary proximal spinal muscular atrophy (SMA) is characterized by abnormal alpha motor neuron function in brainstem and spinal cord. Bulbar dysfunction, including limited mouth opening, is present in the majority of patients with SMA but it is unknown if and how these problems change during disease course.

Objective

In this prospective, observational, longitudinal natural history study we aimed to study bulbar dysfunction in patients with SMA types 2 and 3.

Methods

We included 44 patients with SMA types 2 and 3 (mean age was 33.6 (95% CI 28.4;38.9) and re-examined them after on average 4 years. None were treated with SMN-modulating treatments before or during the course of this study. Longitudinal assessments included a questionnaire on mandibular and bulbar function, the Mandibular Function Impairment Questionnaire (MFIQ), and a clinical examination of masticatory performance, maximum voluntary bite force, and mandibular movements including the active maximal mouth opening.

Results

We found significant higher MFIQ scores and a significant decrease of all mandibular movements in patients with SMA type 2 (p < 0.001), but not in SMA type 3. Masticatory performance and maximum voluntary bite force did not change significantly. Mean reduction of active maximal mouth opening at follow-up was 3.5 mm in SMA type 2 (95% CI: 2.3; 4.7, p < 0.001). SMA type 2 was an independent predictor for a more severe reduction of the mouth opening (β= -2.0 mm (95% CI: -3.8; -0.1, p = 0.043)).

Conclusions

Bulbar functions such as mandibular mobility and active maximum mouth opening decrease significantly over the course of four years in patients with SMA type 2.

Chewing performance of patients with worn dentition before and after restorations: A scoping review

BACKGROUND

Tooth wear is a multifactorial complex process related to the loss of dental tissue, due to chemical or mechanical processes, by abrasion, attrition, erosion. Restorative treatment represents an attempt to rebuild and recreate the lost structure.

OBJECTIVE

This scoping review aims to investigate whether restorative treatment of worn dentition (either with direct or indirect adhesive composite adhesive procedures or with prosthetic techniques) can have an impact on the masticatory performance parameters.

METHODS

A scoping review was conducted on multiple databases (Pubmed, Medline CENTRAL, ICTRP), following the PRISMA guidelines. Abstracts of research papers were screened for suitability, and full-text articles were obtained for those who satisfied the inclusion and exclusion criteria.

RESULTS

Only one article meet the inclusion criteria of the review. Restorative treatment of worn dentition although have a positive impact on the self-report ability to chew, has no effect on the masticatory performance test.

CONCLUSION

At the moment, not enough evidence to comment on the actual therapeutic role of restorative treatment on tooth wear is available. Clinicians, before taking any clinical decision, should carefully discuss with patients the needs and expectations of the treatment plan.

A Chewing Study of Abuse-Deterrent Tablets Containing Polyethylene Oxide Using a Robotic Simulator

Abuse-deterrent formulations (ADFs) refer to formulation technologies aiming to deter the abuse of prescription drugs by making the dosage forms difficult to manipulate or extract the opioids. Assessments are required to evaluate the performance of the drugs through different routes including injection, ingestion, and insufflation and also when the drugs are manipulated. Chewing is the easiest and most convenient way to manipulate the drugs and deserves investigation. Chewing is one of the most complex bioprocesses, where the ingested materials are subject to periodic tooth crushing, mixed through the tongue, and lubricated and softened by the saliva. Inter- and intra-subject variations in chewing patterns may result in different chewing performances. The purpose of this study is to use a chewing simulator to assess the deterrent properties of tablets made of polyethylene oxide (PEO). The simulator can mimic human molar grinding with variable chewing parameters including molar trajectory, chewing frequency, and saliva flow rate. To investigate the effects of these parameters, the sizes of the chewed tablet particles and the chewing force were measured to evaluate the chewing performance. Thirty-four out of forty tablets were broken into pieces. The results suggested that the simulator can chew the tablets into smaller particles and that the molar trajectory and saliva flow rate had significant effect on reducing the size of the particles by analysis of variance (ANOVA) while the effect of chewing frequency was not clear. Additionally, chewing force can work as an indicator of the chewing performance.

Chewing and its influence on swallowing, gastrointestinal and nutrition-related factors: a systematic review

The study aimed to evaluate the hypothesis that chewing is a mechanical and physiological contributor to swallowing, physiologic/pathologic processes of the gastrointestinal tract (GIT), and nutrition-related factors. A search strategy was applied to three different databases to investigate if chewing function in adults affects the swallowing, physiologic/pathologic processes of the GIT, and nutrition-related factors compared to controls with no exposure. The included studies were evaluated for methodological quality and risk of bias and certainty of evidence. The results showed 71 eligible studies. Overall, the results showed that 46 studies supported the hypothesis while 25 refuted it. However, the GRADE analysis showed low to very low certainty of the evidence to support the hypothesis that chewing is an important contributor in the swallowing process, and physiologic/pathologic processes in the GIT. The GRADE analysis also showed a moderate to very low certainty of the evidence to suggest that chewing function contributes to nutrition-related parameters. The overall results of the current study showed that a majority (64.7%) of the studies (46 out of 71) supported the hypothesis. However, robust studies with proper design, adequate sample size, and well-defined outcome parameters are needed to establish conclusive evidence.

Automated Remodelling of Connectors in Fixed Partial Dentures

In this study, an approach for automated parametric remodelling of the connector cross-sectional area in a CAD model of a given fixed partial denture (FPD) geometry was developed and then applied to a 4-unit FPD. The remodelling algorithm was implemented using Rhinoceros and the Grasshopper plugin. The generated CAD models were used to perform a finite element analysis with Ansys to analyse the stress distribution in an implant-supported 4-unit FPD for different connector designs. The results showed that the type of connector adjustment matters and that the resulting stress can be significantly different even for connectors with the same cross-sectional area. For tensile stresses, a reduction in the connector cross-sectional area from the gingival side showed the highest influence on each connector type. It can be concluded that the developed algorithm is suitable for automatic connector detection and adjustment.

Implant-supported prostheses in patients with special needs: A systematic literature review of protocols and outcomes

STATEMENT OF PROBLEM

Implant-supported prostheses for individuals with special needs have been considered high-risk because of the prevalence of poor oral hygiene and parafunction in this population; however, systematic evidence on protocols and outcomes is scarce.

PURPOSE

The purpose of this systematic review was to summarize implant procedures and outcomes for the special needs population.

MATERIAL AND METHODS

A systematic literature review was conducted using PubMed, Embase, and Scopus databases in accordance with the preferred reporting items for systematic reviews and meta-analyses (PRISMA) methodological framework. Data collected included patient information, location and number of implants, surgical and prosthetic procedures, behavior support techniques, postoperative follow-up, complications, and criteria for outcome assessment. Survival rates were pooled for quantitative analysis, and a separate analysis pooling data from groups of special needs patients that present similar risks was undertaken.

RESULTS

The qualitative analysis included 79 studies involving 759 patients and 2269 implants. The quantitative analysis included 65 studies concerning 666 patients with special needs and 1886 implants. The overall weighted implant survival rate was 95.4%, with a mean follow-up duration of 40.7 ±29.5 months.

CONCLUSIONS

In individuals with special needs considered suitable for implant-supported prostheses by their clinician, implant survival rates were similar to those reported in the general population. (J Prosthet Dent xxxx;xxx:xxx-xxx).

Oral Hypofunction and Risk of Weight Change among Independent Older Adults

Oral health is essential for nutritional status; however, little is known about its association with weight change. This study aimed to investigate whether the risk of weight change differs according to the presence of each important component of oral hypofunction (fewer remaining teeth, low chewing efficiency, swallowing problems, and xerostomia) among independent older adults. This was a three-year follow-up cohort study based on self-reported questionnaires. The participants were independent older adults aged ≥65 from the Japan Gerontological Evaluation Study (JAGES). We used >5% weight loss/gain during follow-up as the outcome variables, and the number of remaining teeth (≥20/10-19/0-9), the presence of chewing difficulty, swallowing problems, and xerostomia (yes/no) as the exposure variables. We fitted the Poisson regression model, including possible confounders to estimate the risk ratios (RRs) and 95% confidence intervals (CIs). For weight loss, RRs were significantly higher among those with 0-9 remaining teeth (RR = 1.17; 95% CI = 1.11-1.23), chewing difficulty (RR = 1.12; 95% CI = 1.07-1.16), and xerostomia (RR = 1.11; 95% CI = 1.06-1.16), but there was no significant association with swallowing problems (RR = 1.01; 95% CI = 0.97-1.06). For weight gain, we also found similar associations with oral hypofunction. Oral hypofunction among older adults could have non-negligible health impacts on nutritional status.

Biomechanical Analysis of Titanium Dental Implants in the All-on-4 Treatment with Different Implant-Abutment Connections: A Three-Dimensional Finite Element Study

The type of implant-abutment connection is one of the factors influencing the distribution of occlusal forces. This study aims to investigate the biomechanical performance of the mandibular all-on-4 treatment with different implant-abutment connections. Two connection types with 30° abutments and 18-mm implant fixtures were chosen for the posterior implants of the all-on-4 assembly. For the external hexagon connection (EHC) group, the implants with 4 mm in diameter were used. For the internal hexagon connection (IHC) group, we selected implants with 4.3 mm in diameter. A vertical force of 190 N was applied to the cantilever region. The FEA results indicated that the most stressed region in the two groups was prosthetic screws, followed by multi-unit abutments (MUAs). The lowest values of von Mises stress were both observed on the bone. The peak stress value of the implant screw and implant fixture in the EHC group were 37.75% and 33.03% lower than the IHC group, respectively. For stress distribution patterns, the load force tended to be concentrated at locations where components were interconnected. The EHC and IHC are clinically durable under the tested loading conditions, but the prosthetic screws and MUAs can be the weak point on the posterior implant within the mandibular all-on-four assembly. The peak stress values of implant screw and implant fixture in the EHC groups were lower than the IHC group.

Association of masticatory efficiency with deep carious lesions in children

PURPOSE

Masticatory efficiency is defined as an individual ability to grind and pulverize food material, and can be influenced by many factors. This research aimed to investigate the association between masticatory efficiency and deep carious lesion.

METHODS

The research included 48 children (24 male, 24 female) aged from 3 to 14 years. Participants were allocated to two groups; children with no or with only incipient carious lesions were included in the first group (ICDAS levels 0, 1, or 2), and children with bilateral deep carious lesions that are ICDAS levels 4, 5, and 6 were included in the second group. Information on dental parameters (dental status, ICDAS level of each carious lesion), and level of pain (Wong-Baker scale) were collected from each participant. Participants chewed Optosil® test food for 20 masticatory cycles, and chewed particles were analyzed by the optical scanning method.

RESULTS

There is a significant difference in masticatory efficiency variables (number of chewed particles, minimal and maximal Feret diameter, Sauter mean diameter, a mean and total surface of particles) between groups. A positive significant correlation is observed between WBS level and time needed for masticatory performance in a group of children with deep carious lesions.

CONCLUSION

Deep carious lesions in children are associated with a decrease in masticatory efficiency. Moreover, children with carious lesions that provoke a higher level of pain take more time for masticatory cycles.

Evaluation of occlusal function during orthognathic therapy : A prospective clinical trial using a digital registration method

OBJECTIVES

Reduced occlusal function is a main characteristic of orthognathic patients. The present study aimed to investigate the extent of therapy-induced functional improvements in occlusal function using a digital diagnostic method.

METHODS

This prospective clinical study included 41 orthognathic patients (24 women and 17 men, median age 27.26 ± 8.2 years) and 10 control patients (5 women and 5 men, median age 29.8 ± 13.5 years) with neutral skeletal and dental configurations. The patients were divided into classes I, II and III based on their cephalometry. Digital occlusal registrations in habitual occlusion in an upright sitting position were taken before (T1) and after (T2) therapy using the T‑Scan Novus (Tekscan, South Boston, MA, USA) application.

RESULTS

Class II and III patients showed a significantly less efficient occlusal pattern than the untreated controls regarding total antagonism (p < 0.001), time of occlusion (p = 0.004), occlusal asymmetry (p = 0.001), anterior antagonism (p < 0.001) and posterior antagonism (p < 0.001). After therapy, the occlusal pattern increased in both therapy groups, where class III patients became indistinguishable from the controls, and class II patients differed only in posterior antagonism (p = 0.035).

CONCLUSIONS

The digital occlusal registration method proved to be a useful diagnostic tool and provided new insights into therapeutic effects in orthognathic patients. By precisely adjusting the occlusal function, masticatory performance improved significantly.

CLINICAL RELEVANCE

Severe malocclusion leads to a significantly lower masticatory performance for patients, which can be improved by orthognathic therapy and captured by digital occlusal registration.

The effect of single-implant overdentures on cognitive function in older adults: A 3-year follow-up report

OBJECTIVE

To investigate the occurrence of mild cognitive impairment in edentulous patients up to 3 years after they received single-implant overdentures (1-IODs).

METHODS

This was a follow-up study for a crossover randomized controlled trial comparing 1-IODs and conventional complete dentures, with patient satisfaction as the primary outcome. In the present study, the cognitive function of the patients, measured with the Japanese version of the Montreal cognitive assessment (MoCA-J), was evaluated as the secondary outcome at baseline and 2 months, 1 year, 2 years, and 3 years after 1-IOD placement. The total and domain (memory, executive function, visuospatial skills, language, attention, and orientation) MoCA-J scores of the patients at each timepoint were analyzed and compared.

RESULTS

Twenty-two patients with edentulous mandibles received 1-IODs. Within-group comparisons revealed that the total MoCA-J scores at 1 year and 3 years after 1-IOD placement were significantly increased compared with baseline scores. Additionally, the memory domain scores at all timepoint were significantly increased compared with the baseline scores, and the executive function domain scores at the 2-month, 2-year and 3-year timepoint were significantly increased compared with the baseline scores.

CONCLUSION

Patients with edentulous mandibles who underwent 1-IOD placement showed significantly improved total scores of MoCA-J after 1 year and 3 years of wearing 1-IODs. In addition, they showed significantly improved memory domain scores at 2 months, 1 year, 2 years, and 3 years after 1-IOD placement and executive function domain scores at 2 months, 2 years, and 3 years after 1-IOD placement.

CLINICAL SIGNIFICANCE

The results of this study suggest that 1-IOD treatment for older adults, especially those with edentulous mandibles, may prevent cognitive decline regardless of the condition of the maxilla.

Comparison of Oropharyngeal Efficiency Between Two Popular Brands of Marie Biscuits

OBJECTIVE

The main objective of the study was to compare four measures of TOMASS (number of bites, number of masticatory cycles, number of swallowing and total time taken) across brands of Marie biscuits and gender.

METHODOLOGY

The study employed a cross-sectional design with nonrandomized convenience sampling. A total of 60 participants (30 females and 30 males) were recruited for the study in the age range of 18 to 26 years. Prior to enrolment in the study, the participants were screened for potential speech and swallowing issues. Two commercially available crackers (biscuits) in India, Sunfeast Marie Light and Britannia Marie Gold were used. Video recordings of the participants eating the biscuits were analyzed to document four measures of TOMASS.

RESULTS

The mean values obtained on all the measures for males were lesser than mean values for females for both the biscuits. Mann-Whitney U test revealed a statistically significant difference across number of swallows and total time taken across gender. There were no significant differences across biscuits on the four TOMASS measures.

CONCLUSION

It can be concluded that the TOMASS measures were near similar for both brands of Marie biscuits. Thus, any of these two brands of Marie could be used for clinical swallow evaluation. However, gender needs to be kept in mind, while interpreting the results of TOMASS. Future studies need to be conducted with other brands of Marie biscuit and in other age groups.

Performance of complete dentures fabricated with the simplified and the traditional technique: A randomized clinical trial

STATEMENT OF PROBLEM

The simplified technique has been recommended for the fabrication of removable complete dentures. However, a consensus regarding the performance of the simplified and the traditional techniques is lacking.

PURPOSE

The purpose of this randomized clinical trial was to compare the performance of prostheses fabricated with the simplified and the traditional techniques.

MATERIAL AND METHODS

Sixty participants were recruited and randomized into 2 groups: traditional technique (control group) and simplified technique (experimental group). The assessments were performed before treatment (baseline) and 2 and 4 months after adaptation to the new complete dentures. The variables evaluated were satisfaction, oral health-related quality of life (OHRQoL) by using the Brazilian version of the OHIP-EDENT, the quality of the prostheses, and, for the functional assessment, the masticatory performance and swallowing threshold. The data were analyzed by the Fisher exact test, the Mann-Whitney test, and the generalized equations estimating (GEE) method.

RESULTS

At baseline, the mean ±standard deviation quality of the prostheses was 5.3 ±2.3 for the traditional technique and 4.9 ±2.3 for the simplified technique, and at 4 months, it was 9.3 ±0.9 and 9.1 ±0.9, respectively. For masticatory performance, the mean ±standard deviation X50 at baseline was 5.7 ±1.4 for the traditional technique and 5.7 ±0.9 for the simplified technique, and at 4 months, it was 3.8 ±1.2 and 3.7 ±0.9, respectively. The mean ±standard deviation OHRQoL at baseline was 14.1 ±8.6 for the traditional technique and 12.5 ±9.4 for the simplified technique, and at 4 months, it was 3.2 ±4.3 and 2.6 ±5.1, respectively. The mean ±standard deviation satisfaction at baseline was 9.5 ±3.9 for the traditional technique and 9.3 ±4.2 for the simplified technique; after 4 months, it was 14.8 ±2.0 for both techniques. There was a significant improvement (P<.05) for all variables in the study when comparing them at the baseline to those at the evaluation after provision of new complete dentures. There was no significant difference in all analyzed variables (P>.05) between the 2 techniques for prosthesis fabrication.

CONCLUSIONS

The simplified technique appears to be a suitable alternative to the traditional technique for the fabrication of complete dentures, with similar performance.

Evaluation of bite force, quality of life, and patients' satisfaction in elderly edentulous patients using implant overdentures

Purpose

This study aimed to compare the bite force (BF) between complete dentures and implant overdentures (IODs) retained by two mandibular implants. Additionally, we evaluated the quality of life (QoL) and patient satisfaction among individuals using IODs. In addition, the effects of demographic parameters such as age and sex, and clinical parameters such as implant length, implant diameter, attachment height, attachment color, and interimplant distance on BF, QoL, and patient satisfaction were evaluated.

Materials and methods

A total of 51 edentulous patients rehabilitated with the maxillary complete dentures and mandibular IODs retained by two implants were included in this study. BF was measured using a force meter pre- and post-implant in the same patients. Oral health-related quality of life (OHRQoL) was assessed with the Oral Health Impact Profile (OHIP-14) and patient satisfaction was assessed with the Visual Analog Scale (VAS) questionnaires.

Results

It was found that BF values were statistically higher for IODs than complete dentures (P < .001). In terms of attachment height of the OHIP scores, there was a significant difference in the psychological disability and social disability domains (P < .05). When examining the change in patient satisfaction as a function of sex, it was found that mandibular retention satisfaction differed significantly by sex (P < .05), but there was no significant difference in the other domains.

Conclusion

Within the limitations of this study, it was observed that the BF increased after the use of IODs. Several factors, including age, interimplant distance, attachment height, and attachment color, were found to impact OHRQoL. Sex and implant diameter were identified as factors affecting patient satisfaction.

Malnutrition- inflammation- atherosclerosis (MIA) syndrome associates with periodontitis in end-stage renal disease patients undergoing hemodialysis: a cross-sectional study

Malnutrition-inflammation-atherosclerosis (MIA) syndrome is a significant risk factor for mortality in patients undergoing hemodialysis. This study aimed to investigate the association between MIA syndrome and oral health status in hemodialysis patients. A cross-sectional study was conducted on 254 hemodialysis patients. Comprehensive medical and dental examinations were performed. Three components were included to define MIA syndrome: Geriatric Nutritional Risk Index, serum high-sensitivity C-reactive protein, and history of cardiovascular events as indicators of malnutrition, inflammation, and atherosclerosis, respectively. The association of MIA syndrome components with periodontitis and occlusal support was examined by multiple-ordered logistic regression analysis. Of 254 participants, 188 (74.0%) had at least one component of MIA syndrome. After adjusting for possible confounding factors, severe periodontitis was significantly associated with presence of more components of MIA syndrome (odds ratio [OR]: 2.64, 95% confidence interval [CI], 1.44-4.84, p = 0.002) and inflammation and malnutrition components (OR: 2.47 and 3.46, 95% CI 1.16-5.28 and 1.70-7.05, p = 0.020 and 0.001). On the other hand, occlusal support, evaluated by Eichner index, was not significantly associated with MIA syndrome or any of its components. In conclusion, periodontitis is associated with MIA syndrome, particularly with inflammation and malnutrition in hemodialysis patients, independent of occlusal support.

Viscoelastic behavior of oral mucosa. A rheological study using small-amplitude oscillatory shear tests

The purpose of this work was to determine the viscoelastic behavior of porcine and human oral mucosa under physiological conditions of temperature, hydration and chewing. The linear elastic and viscous shear moduli of these soft tissues were determined by small-amplitude oscillatory shear (SAOS) tests at masticatory frequency using a stress-controlled rheometer equipped with an immersion cell on punched biopsies 8 mm in diameter. Non physiological conditions of temperature were also used to access other parameters such as the denaturation temperature of collagen. First, the different parameters such as normal force, frequency and maximal strain were adjusted to obtain reliable data on porcine mucosa. The optimal normal force was 0.1N and the linear viscoelastic limit was found for a strain amplitude of 0.5% for both 0.1 and 1 Hz. The storage moduli of porcine mucosa, ranging from 5 to 16 kPa, were in the same range as cutaneous tissues determined by SAOS at equivalent frequencies. The storage modulus, superior to the loss modulus G″, indicates a predominant elastic contribution to shear stress in chewing conditions. Second, this protocol evidenced an influence of the anatomic site of the mouth on the viscoelastic behavior of porcine mucosa, mandibular biopsies having higher storage moduli than maxillary biopsies. Temperature scans showed the mechanical manifestation of collagen denaturation in the 60-70 °C range as previous calorimetric analyses. Finally, this mechanical protocol was successfully adapted to characterize human mucosa in an elderly population. It was shown that the elastic modulus is impacted by local inflammation (gingivitis), decreasing significantly from 6 ± 1.4 kPa to 2.5 ± 0.3 kPa.

Impact of varying food hardness on mastication/swallowing

The purpose of this study was to analyze mastication and swallowing in the elderly and confirm the association with dysphagia characteristics. A questionnaire was developed to evaluate the masticating and swallowing functions of the elderly. Mastication was analyzed using electromyography, and tongue/lip pressures were measured using Iowa Oral Performance Instrument. The results of the questionnaire showed that statistical difference in the number of teeth between the group without and with, decreased ability to swallow, and there was a correlation with lip pressure. Additionally, the higher number of teeth, the higher muscle activity, and there is a positive correlation between the number of chews and the lip pressure. Consequently, our findings suggested oral health parameters are closely associated with mastication/swallowing ability. Finally, based on the results obtained for different foods tested, we suggested that texture-modified foods are necessary to enhance swallowing ability.

Development and validation of a nomogram for predicting dysphagia in long-term care facility residents

BACKGROUND

Dysphagia is a common problem that can seriously affect the health of elderly residents in long-term care facilities. Early identification and targeted measures can significantly reduce the incidence of dysphagia.

AIM

This study aims to establish a nomogram to evaluate the risk of dysphagia for elderly residents in long-term care facilities.

METHODS

A total of 409 older adults were included in the development set, and 109 were included in the validation set. Least absolute shrinkage selection operator (LASSO) regression analysis was used to select the predictor variables, and logistic regression was used to establish the prediction model. The nomogram was constructed based on the results of logistic regression. The performance of the nomogram was evaluated by receiver operating characteristic (ROC) curve, calibration, and decision curve analysis (DCA). Internal validation was performed using tenfold cross-validation with 1000 iterations.

RESULTS

The predictive nomogram included the following variables: stroke, sputum suction history (within one year), Barthel Index (BI), nutrition status, and texture-modified food. The area under the curve (AUC) for the model was 0.800; the AUC value for the internal validation set was 0.791, and the AUC value for the external validation set was 0.824. The nomogram showed good calibration in both the development set and validation set. Decision curve analysis (DCA) demonstrated that the nomogram was clinically valuable.

DISCUSSION

This predictive nomogram provides a practical tool for predicting dysphagia. The variables included in this nomogram were easy to assess.

CONCLUSIONS

The nomogram may help long-term care facility staff identify older adults at high risk for dysphagia.

Application in the analysis of the occlusal force of free-end missing tooth implant restoration with T-SCAN III

Introduction: The occlusal force of the teeth in the dental arch and the remaining adjacent natural teeth will change after implant restoration with a free-end missing tooth. This study intends to use the T-SCAN III scanner to collect dynamic quantitative data before and after the restoration of free-end implants and to explore the application of the T-SCAN III in redistributing the occlusal force of free-end implants.

Methods: In this study, 24 patients with free-end implant restoration were selected, and their occlusion was tested before, immediately after, and 3 months after implant restoration.

Results: In all 24 cases, the bite force of the first natural tooth adjacent to the implanted tooth after restoration changed from 19.12% ± 9.48%–12.93% ± 11.47% (p &lt; 0.01). For additional data analysis, all cases were further subdivided by single implant and fixed bridge restorations. In 17 cases, there was a successful follow-up after 3 months. The percentage of the total bite force of dental arch with implant increased from 41.92% ± 10.78%–53.06% ± 10.71% (p &lt; 0.01).

Discussion: This study shows that the free-end implant restoration protects the remaining natural teeth, and the patient’s missing dental arch bite force improves within 3 months of implant restoration.

Changes in masticatory performance and the new onset of diabetes mellitus in older adults: a 5-year longitudinal study

Objective

Although masticatory performance is affected by age-related reduction in number of teeth (or treatment), the relationship between longitudinal changes in masticatory performance and diabetes mellitus is unknown. This longitudinal study investigated the association between changes in masticatory performance and new-onset diabetes mellitus among community-dwelling Japanese older adults.

Methods

The data of 214 older adults living in Ohnan Town, Shimane, Japan, who participated in two surveys conducted between 2012 and 2017 were analyzed. Diabetes mellitus was defined as a hemoglobin A1c level ≥ 6.5% or self-reported diabetes mellitus. The masticatory performance (measured by number of gummy jelly pieces collected after chewing) was evaluated by dental hygienists. Masticatory performance was categorized into two groups (high or low) based on the median in each survey; further, four groups (Group A: remained consistently high, Group B: changed from low to high, Group C: remained consistently low, Group D: changed from high to low) were used to determine longitudinal changes in masticatory performance. Logistic regression was used to analyze the association between changes in masticatory performance and new-onset diabetes mellitus.

Results

Overall, 10.3% of participants had diabetes mellitus at the follow-up survey. Multivariate analysis showed that Group D (odds ratio 8.69, 95% confidence interval 1.98-38.22) was positively associated with the development of diabetes mellitus compared with Group A after adjusting for sex, age, body mass index, alcohol consumption, physical activity, and eating speed.

Conclusions

Deteriorating masticatory performance for 5 years may cause diabetes mellitus among older adults.

Fracture Resistance of Repaired 5Y-PSZ Zirconia Crowns after Endodontic Access

This study analyzed the fracture load before and after a chewing simulation of zirconia crowns that were trepanned and repaired using composite resin. Overall, 3 groups with 15 5Y-PSZ crowns in each group were tested. For group A, the fracture load of the unmodified crowns was evaluated. For group B, the crowns were trepanned and repaired using composite resin, also followed by a fracture test. For group C, crowns were prepared like in group B but received thermomechanical cycling before the final fracture tests. Furthermore, scanning electron microscopy (SEM) and X-ray microscopy (XRM) analysis were performed for group C. The mean fracture loads and standard deviation were 2260 N ± 410 N (group A), 1720 N ± 380 N (group B), and 1540 N ± 280 N (group C). Tukey-Kramer multiple comparisons showed a significant difference between groups A and B (p < 0.01) and groups A and C (p < 0.01). After ageing, surface fissures were detected via SEM, but no cracks that reached from the occlusal to the inner side of the crown were detected via XRM. Within the limitations of this study, it can be stated that trepanned and composite-repaired 5Y-PSZ crowns show lower fracture loads than 5Y-PSZ crowns without trepanation.

Fracture load of 4-unit interim fixed partial dentures using 3D-printed and traditionally manufactured materials

STATEMENT OF PROBLEM

How the fracture strength of recently introduced 3-dimensionally (3D) printed interim materials compares with that of conventional materials is unclear.

PURPOSE

The purpose of this in vitro study was to compare the fracture load of 4-unit interim fixed partial dentures made from 3 different materials before and after mastication simulation.

MATERIAL AND METHODS

Based on a master model of a 4-unit fixed partial denture with maxillary left first premolar and second molar abutment teeth, interim restorations were fabricated from 3 different materials (3D-printed, Temporary CB Resin, milled, PMMA for brain, and manually manufactured, Luxatemp Plus). The fixed partial dentures (n=30 for each material) were cemented on 3D-printed model abutment teeth that were connected via a thin latex layer to a polyurethane base block. The fracture load of 15 fixed partial dentures of each material was tested without aging. Another 15 fixed partial dentures of each material were tested after thermomechanical aging.

RESULTS

The mean fracture load was between 186 N and 661 N, and all materials showed significant lower fracture loads after aging. Before and after aging (before/after ±standard deviation) milled (661 ±59/568 ±52 N) achieved the highest loads before manually manufactured (621 ±100/478 ±96 N) and 3D-printed (294 ±83/186 ±70).

CONCLUSIONS

The 3D-printed interim restoration material and the inherent manufacturing process show significant lower fracture loads than the tested alternatives. However, as the influence of geometric differences could not be quantified, whether this remains true after correcting for geometric differences remains unclear. For the tested interim materials, thermocycling and mastication simulation significantly reduced fracture loads over time, even at loads as low as 50 N.

Masticatory Function in Individuals with Temporomandibular Disorders: A Systematic Review and Meta-Analysis

The literature search was performed according to the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) protocol in the PubMed, Cochrane Library, LILACS, EBSCO, Scielo, between 2012 and 2022. The methodological quality was assessed by using the Newcastle-Ottawa Study Quality Assessment Scale. Mean differences and 95% confidence intervals were calculated and combined in meta-analyses. A total of 1202 participants were included in this systematic review (690 with TMD; 512 without TMD), with 22 articles being included in the qualitative analysis. Only three studies enabled the comparative analysis of the results. Ten articles showed a high methodological quality and a low risk of bias, and twelve had a low methodological quality and an increased risk of bias. The meta-analysis showed that the differences between the intervention and control groups were not statistically significant for the percentage overlapping coefficient of the anterior temporal muscle, for the masseter, and for the torque coefficient. The parameters analyzed with the compound technique for chewing showed altered mandibular functions in individuals with TMD. With the EMG method, it was possible to suggest that TMD in adult individuals causes compensatory muscle behaviors, and several changes in the masticatory function were found.

Reliability and measurement error of anterior maximum voluntary bite force in children with juvenile idiopathic arthritis and healthy children

In children with juvenile idiopathic arthritis (JIA) the temporomandibular joint (TMJ) can be involved. As a consequence, the oral function can be impaired due to joint and/or muscle involvement of the masticatory system with a negative influence on the maximum bite force. The aim of this cross-sectional study was to establish the reliability of AMVBF in children with JIA and healthy children. Children with JIA and healthy children conducted three attempts of AMVBF. The reliability of AMVBF measurement was determined by the intra-class correlation coefficient (ICC) by age, standard error of measurement (SEM), smallest detectable change (SDC), and limits of agreement (LoA). A total of 298 children with JIA and 168 healthy children were examined. The AMVBF measurements showed an good to excellent reliability in children with JIA based on the ICCs corrected for age (0.782-0.979). In healthy children, the reliability was moderate to excellent (0.546-0.999). The SDC in our study indicated that values above 11.4N might be a clinical relevant change over time in children with JIA. The LoA showed a wide spread of variability in both children with JIA (-72.6-44.4N) and healthy children (-79.9-72.8N). The Bland-Altman plots indicated that the differences between the test and retest increased in value proportionally to the biteforce value.

Comprehensive Dental Treatment under General Anesthesia Improves Mastication Capability in Children with Early Childhood Caries-A One-Year Follow-Up Study

BACKGROUND

Using the granulometry of ready-to-swallow food boluses, this study investigated the evolution of masticatory capability of children with Early Childhood Caries (ECC) after comprehensive dental treatment under general anesthesia (GA).

METHODS

Sixteen children with ECC were assessed before and over one year after dental treatment under GA, in comparison with 12 children with a Healthy Oral State (HOS). Oral health criteria, quality of life, body mass index, and frequency of orofacial dysfunctions were recorded. Masticatory kinematic parameters and median food bolus particle size (D50) at swallowing were assessed while masticating raw carrot (CAR), cheese (CHS), and breakfast cereals (CER). The impact of posterior teeth extractions was analyzed.

RESULTS

Quality of life and orofacial functions improved after dental treatment. Chewing frequency for all three foods increased without reaching the values of children with HOS, while D50 values for CAR and CHS decreased. After one year, children with posterior teeth extractions exhibited higher D50 values for CAR and CHS than children with only conservative treatment. One third of children with ECC were overweight or obese.

CONCLUSIONS

Comprehensive dental treatment improved children's mastication, and their BMI subsequently increased. Links between mastication and nutrition should be investigated further in children.