Plastid marker-gene excision by transiently expressed CRE recombinase

Advanced editing of the nuclear and plastid genomes in plants

Genome editing is a powerful suite of technologies utilized in basic and applied plant research. Both nuclear and plastid genomes have been genetically engineered to alter traits in plants. While the most frequent molecular outcome of gene editing has been knockouts resulting in a simple deletion of an endogenous protein of interest from the host's proteome, new genes have been added to plant genomes and, in several instances, the sequence of endogenous genes have been targeted for a few coding changes. Targeted plant characteristics for genome editing range from single gene targets for agronomic input traits to metabolic pathways to endow novel plant function. In this paper, we review the fundamental approaches to editing nuclear and plastid genomes in plants with an emphasis on those utilizing synthetic biology. The differences between the eukaryotic-type nuclear genome and the prokaryotic-type plastid genome (plastome) in plants has profound consequences in the approaches employed to transform, edit, select transformants, and indeed, nearly all aspects of genetic engineering procedures. Thus, we will discuss the two genomes targeted for editing in plants, the toolbox used to make edits, along with strategies for future editing approaches to transform crop production and sustainability. While CRISPR/Cas9 is the current method of choice in editing nuclear genomes, the plastome is typically edited using homologous recombination approaches. A particularly promising synthetic biology approach is to replace the endogenous plastome with a 'synplastome' that is computationally designed, and synthesized and assembled in the lab, then installed into chloroplasts. The editing strategies, transformation methods, characteristics of the novel plant also affect how the genetically engineered plant may be governed and regulated. Each of these components and final products of gene editing affect the future of biotechnology and farming.

Construction of Plastid Expression Vector and Development of Genetic Transformation System for the Seaweed Pyropia yezoensis

Pyropia yezoensis, belonging to the Rhodophyta, is an economically important seaweed. In this study, we developed a high-efficiency plastid transformation platform for P. yezoensis. In the plastid transformation vector, psbA UTR of P. yezoensis, including the promoter and 3' UTR, was used to express foreign genes. The integration site was a transcriptionally active intergenic region between the rrsB and trnI genes, located in the inverted repeat regions of the plastid genome. The CAT and eGFP genes were integrated into the plastid genome at this site. The expression of CAT in the transformants confers resistance to chloramphenicol through the action of chloramphenicol acetyltransferase, which inactivates the drug, thereby allowing the plant to grow well under selective pressure. The eGFP fluorescence signal was also observed in transformed cells and the transformants. The average survival rate of treated cells was estimated to be approximately 4.2‰ (4 transplastomic colonies per 1000 gametophyte cells). Multiple-PCR analyses confirmed that the CAT and eGFP genes were successfully integrated in the site between rrsB and trnI. Western blot also showed eGFP expression in the cells of transformants. Thus, this study presents the first convenient plastid gene expression system for P. yezoensis and provides an important platform for studying gene function in P. yezoensis.

Engineering chloroplasts to improve Rubisco catalysis: prospects for translating improvements into food and fiber crops

494 I. 495 II. 496 III. 496 IV. 499 V. 499 VI. 501 VII. 501 VIII. 502 IX. 505 X. 506 507 References 507 SUMMARY: The uncertainty of future climate change is placing pressure on cropping systems to continue to provide stable increases in productive yields. To mitigate future climates and the increasing threats against global food security, new solutions to manipulate photosynthesis are required. This review explores the current efforts available to improve carbon assimilation within plant chloroplasts by engineering Rubisco, which catalyzes the rate-limiting step of CO₂ fixation. Fixation of CO₂ and subsequent cycling of 3-phosphoglycerate through the Calvin cycle provides the necessary carbohydrate building blocks for maintaining plant growth and yield, but has to compete with Rubisco oxygenation, which results in photorespiration that is energetically wasteful for plants. Engineering improvements in Rubisco is a complex challenge and requires an understanding of chloroplast gene regulatory pathways, and the intricate nature of Rubisco catalysis and biogenesis, to transplant more efficient forms of Rubisco into crops. In recent times, major advances in Rubisco engineering have been achieved through improvement of our knowledge of Rubisco synthesis and assembly, and identifying amino acid catalytic switches in the L-subunit responsible for improvements in catalysis. Improving the capacity of CO₂ fixation in crops such as rice will require further advances in chloroplast bioengineering and Rubisco biogenesis.

Extending the biosynthetic repertoires of cyanobacteria and chloroplasts

Chloroplasts in plants and algae and photosynthetic microorganisms such as cyanobacteria are emerging hosts for sustainable production of valuable biochemicals, using only inorganic nutrients, water, CO2 and light as inputs. In the past decade, many bioengineering efforts have focused on metabolic engineering and synthetic biology in the chloroplast or in cyanobacteria for the production of fuels, chemicals and complex, high-value bioactive molecules. Biosynthesis of all these compounds can be performed in photosynthetic organelles/organisms by heterologous expression of the appropriate pathways, but this requires optimization of carbon flux and reducing power, and a thorough understanding of regulatory pathways. Secretion or storage of the compounds produced can be exploited for the isolation or confinement of the desired compounds. In this review, we explore the use of chloroplasts and cyanobacteria as biosynthetic compartments and hosts, and we estimate the levels of production to be expected from photosynthetic hosts in light of the fraction of electrons and carbon that can potentially be diverted from photosynthesis. The supply of reducing power, in the form of electrons derived from the photosynthetic light reactions, appears to be non-limiting, but redirection of the fixed carbon via precursor molecules presents a challenge. We also discuss the available synthetic biology tools and the need to expand the molecular toolbox to facilitate cellular reprogramming for increased production yields in both cyanobacteria and chloroplasts.

Plastid genomics in horticultural species: importance and applications for plant population genetics, evolution, and biotechnology

During the evolution of the eukaryotic cell, plastids, and mitochondria arose from an endosymbiotic process, which determined the presence of three genetic compartments into the incipient plant cell. After that, these three genetic materials from host and symbiont suffered several rearrangements, bringing on a complex interaction between nuclear and organellar gene products. Nowadays, plastids harbor a small genome with ∼130 genes in a 100-220 kb sequence in higher plants. Plastid genes are mostly highly conserved between plant species, being useful for phylogenetic analysis in higher taxa. However, intergenic spacers have a relatively higher mutation rate and are important markers to phylogeographical and plant population genetics analyses. The predominant uniparental inheritance of plastids is like a highly desirable feature for phylogeny studies. Moreover, the gene content and genome rearrangements are efficient tools to capture and understand evolutionary events between different plant species. Currently, genetic engineering of the plastid genome (plastome) offers a number of attractive advantages as high-level of foreign protein expression, marker gene excision, gene expression in operon and transgene containment because of maternal inheritance of plastid genome in most crops. Therefore, plastid genome can be used for adding new characteristics related to synthesis of metabolic compounds, biopharmaceutical, and tolerance to biotic and abiotic stresses. Here, we describe the importance and applications of plastid genome as tools for genetic and evolutionary studies, and plastid transformation focusing on increasing the performance of horticultural species in the field.

Plastid marker gene excision in greenhouse-grown tobacco by agrobacterium-delivered Cre recombinase

Uniform transformation of the thousands of plastid genome (ptDNA) copies in a cell is driven by selection for plastid markers. When each of the plastid genome copies is uniformly altered, the marker gene is no longer needed. Plastid markers have been efficiently excised by site-specific recombinases expressed from nuclear genes either by transforming tissue culture cells or introducing the genes by pollination. Here we describe a protocol for the excision of plastid marker genes directly in tobacco (Nicotiana tabacum) plants by the Cre recombinase. Agrobacterium encoding the recombinase on its T-DNA is injected at an axillary bud site of a decapitated plant, forcing shoot regeneration at the injection site. The excised plastid marker, the bar (au) gene, confers a visual aurea leaf phenotype; thus marker excision via the flanking recombinase target sites is recognized by the restoration of normal green color of the leaves. The bar (au) marker-free plastids are transmitted through seed to the progeny. PCR and DNA gel blot (Southern) protocols to confirm transgene integration and plastid marker excision are also provided herein.

Less is more: strategies to remove marker genes from transgenic plants

Selectable marker genes (SMGs) and selection agents are useful tools in the production of transgenic plants by selecting transformed cells from a matrix consisting of mostly untransformed cells. Most SMGs express protein products that confer antibiotic- or herbicide resistance traits, and typically reside in the end product of genetically-modified (GM) plants. The presence of these genes in GM plants, and subsequently in food, feed and the environment, are of concern and subject to special government regulation in many countries. The presence of SMGs in GM plants might also, in some cases, result in a metabolic burden for the host plants. Their use also prevents the re-use of the same SMG when a second transformation scheme is needed to be performed on the transgenic host. In recent years, several strategies have been developed to remove SMGs from GM products while retaining the transgenes of interest. This review describes the existing strategies for SMG removal, including the implementation of site specific recombination systems, TALENs and ZFNs. This review discusses the advantages and disadvantages of existing SMG-removal strategies and explores possible future research directions for SMG removal including emerging technologies for increased precision for genome modification.

Chloroplast transformation for engineering of photosynthesis

Many efforts are underway to engineer improvements in photosynthesis to meet the challenges of increasing demands for food and fuel in rapidly changing environmental conditions. Various transgenes have been introduced into either the nuclear or plastid genomes in attempts to increase photosynthetic efficiency. We examine the current knowledge of the critical features that affect levels of expression of plastid transgenes and protein accumulation in transplastomic plants, such as promoters, 5' and 3' untranslated regions, RNA-processing sites, translation signals and amino acid sequences that affect protein turnover. We review the prior attempts to manipulate the properties of ribulose-1,5-bisphosphate carboxylase oxygenase (Rubisco) through plastid transformation. We illustrate how plastid operons could be created for expression of the multiple genes needed to introduce new pathways or enzymes to enhance photosynthetic rates or reduce photorespiration. We describe here the past accomplishments and future prospects for manipulating plant enzymes and pathways to enhance carbon assimilation through plastid transformation.

Visual marker and Agrobacterium-delivered recombinase enable the manipulation of the plastid genome in greenhouse-grown tobacco plants

Successful manipulation of the plastid genome (ptDNA) has been carried out so far only in tissue-culture cells, a limitation that prevents plastid transformation being applied in major agronomic crops. Our objective is to develop a tissue-culture independent protocol that enables manipulation of plastid genomes directly in plants to yield genetically stable seed progeny. We report that in planta excision of a plastid aurea bar gene (bar(au) ) is detectable in greenhouse-grown plants by restoration of the green pigmentation in tobacco leaves. The P1 phage Cre or PhiC31 phage Int site-specific recombinase was delivered on the Agrobacterium T-DNA injected at the axillary bud site, resulting in the excision of the target-site flanked marker gene. Differentiation of new apical meristems was forced by decapitating the plants above the injection site. The new shoot apex that differentiated at the injection site contained bar(au)-free plastids in 30-40% of the injected plants, of which 7% transmitted the bar(au)-free plastids to the seed progeny. The success of obtaining seed with bar(au)-free plastids depended on repeatedly forcing shoot development from axillary buds, a process that was guided by the size and position of green sectors in the leaves. The success of in planta plastid marker excision proved that manipulation of the plastid genomes is feasible within an intact plant. Extension of the protocol to in planta plastid transformation depends on the development of new protocols for the delivery of transforming DNA encoding visual markers.

Introducing an RNA editing requirement into a plastid-localised transgene reduces but does not eliminate functional gene transfer to the nucleus

In higher plants, DNA transfer from the plastid (chloroplast) genome to the nucleus is a frequent, ongoing process. However, there has been uncertainty over whether this transfer occurs by a direct DNA mechanism or whether RNA intermediates are involved. Previous experiments utilising transplastomic Nicotiana tabacum (tp7 and tp17) enabled the detection of plastid-to-nucleus transfer in real time. To determine whether RNA intermediates are involved in this transfer, transplastomic lines (tpneoACG) were generated containing, in their plastid genomes, a nuclear promoter-driven kanamycin resistance gene (neo) with a start codon that required plastid RNA editing but otherwise identical to tp7 and tp17. Therefore it was expected that kanamycin resistance would only be acquired following RNA-mediated transfer of neo to the nucleus. Screening of tpneoACG progeny revealed several kanamycin-resistant plants, each of which contained the neo gene located in the nucleus. Surprisingly, neo was unedited in all these plants, indicating that neoACG was active in the absence of an edited start codon and suggesting that RNA intermediates were not involved in the transfers. However, analysis of tpneoACG revealed that only a low proportion of transcripts potentially able to mediate neo transfer were edited, thus precluding unequivocal conclusions regarding the role of RNA in plastid-to-nucleus transfer. The low proportion of edited transcripts was found to be due to predominant antisense neo transcripts, rather than to low editing efficiency of the sense transcripts. This study highlights a number of important considerations in the design of experiments utilising plastid RNA editing. The results also suggest that RNA editing sites reduce but do not eliminate functional plastid-to-nucleus gene transfer. This is relevant both in an evolutionary context and in placing RNA editing-dependent genes in the plastid genome as a means of transgene containment.

The chloroplast transformation toolbox: selectable markers and marker removal

Plastid transformation is widely used in basic research and for biotechnological applications. Initially developed in Chlamydomonas and tobacco, it is now feasible in a broad range of species. Selection of transgenic lines where all copies of the polyploid plastid genome are transformed requires efficient markers. A number of traits have been used for selection such as photoautotrophy, resistance to antibiotics and tolerance to herbicides or to other metabolic inhibitors. Restoration of photosynthesis is an effective primary selection method in Chlamydomonas but can only serve as a screening tool in flowering plants. The most successful and widely used markers are derived from bacterial genes that inactivate antibiotics, such as aadA that confers resistance to spectinomycin and streptomycin. For many applications, the presence of a selectable marker that confers antibiotic resistance is not desirable. Efficient marker removal methods are a major attraction of the plastid engineering tool kit. They exploit the homologous recombination and segregation pathways acting on chloroplast genomes and are based on direct repeats, transient co-integration or co-transformation and segregation of trait and marker genes. Foreign site-specific recombinases and their target sites provide an alternative and effective method for removing marker genes from plastids.

Plant plastid engineering

Genetic material in plants is distributed into nucleus, plastids and mitochondria. Plastid has a central role of carrying out photosynthesis in plant cells. Plastid transformation is becoming more popular and an alternative to nuclear gene transformation because of various advantages like high protein levels, the feasibility of expressing multiple proteins from polycistronic mRNAs, and gene containment through the lack of pollen transmission. Recently, much progress in plastid engineering has been made. In addition to model plant tobacco, many transplastomic crop plants have been generated which possess higher resistance to biotic and abiotic stresses and molecular pharming. In this mini review, we will discuss the features of the plastid DNA and advantages of plastid transformation. We will also present some examples of transplastomic plants developed so far through plastid engineering, and the various applications of plastid transformation.

Advances in chloroplast engineering

The chloroplast is a pivotal organelle in plant cells and eukaryotic algae to carry out photosynthesis, which provides the primary source of the world's food. The expression of foreign genes in chloroplasts offers several advantages over their expression in the nucleus: high-level expression, transgene stacking in operons and a lack of epigenetic interference allowing stable transgene expression. In addition, transgenic chloroplasts are generally not transmitted through pollen grains because of the cytoplasmic localization. In the past two decades, great progress in chloroplast engineering has been made. In this paper, we review and highlight recent studies of chloroplast engineering, including chloroplast transformation procedures, controlled expression of plastid transgenes in plants, the expression of foreign genes for improvement of plant traits, the production of biopharmaceuticals, metabolic pathway engineering in plants, plastid transformation to study RNA editing, and marker gene excision system.

Translational fusion of chloroplast-expressed human papillomavirus type 16 L1 capsid protein enhances antigen accumulation in transplastomic tobacco

Human Papillomavirus (HPV) is the causal agent of cervical cancer, one of the most common causes of death for women. The major capsid L1 protein self-assembles in Virus Like Particles (VLPs), which are highly immunogenic and suitable for vaccine production. In this study, a plastid transformation approach was assessed in order to produce a plant-based HPV-16 L1 vaccine. Transplastomic plants were obtained after transformation with vectors carrying a chimeric gene encoding the L1 protein either as the native viral (L1(v) gene) or a synthetic sequence optimized for expression in plant plastids (L1(pt) gene) under control of plastid expression signals. The L1 mRNA was detected in plastids and the L1 antigen accumulated up to 1.5% total leaf proteins only when vectors included the 5'-UTR and a short N-terminal coding segment (Downstream Box) of a plastid gene. The half-life of the engineered L1 protein, determined by pulse-chase experiments, is at least 8 h. Formation of immunogenic VLPs in chloroplasts was confirmed by capture ELISA assay using antibodies recognizing conformational epitopes and by electron microscopy.

Plastid genomes in a regenerating tobacco shoot derive from a small number of copies selected through a stochastic process

The plastid genome (ptDNA) of higher plants is highly polyploid, and the 1000-10 000 copies are compartmentalized with up to approximately 100 plastids per cell. The problem we address here is whether or not a newly arising genome can be established in a developing tobacco shoot, and be transmitted to the seed progeny. We tested this by generating two unequal ptDNA populations in a cultured tobacco cell. The parental tobacco plants in this study have an aurea (yellowish-golden) leaf color caused by the presence of a bar(au) gene in the ptDNA. In addition, the ptDNA carries an aadA gene flanked with the phiC31 phage site-specific recombinase (Int) attP/attB target sites. The genetically distinct ptDNA copies were obtained by Int, which either excised only the aadA marker gene (i.e. did not affect the aurea phenotype) or triggered the deletion of both the aadA and bar(au) transgenes, and thereby restored the green color. The ptDNA determining green plastids represented only a small fraction of the population and was not seen in a transient excision assay, and yet three out of the 53 regenerated shoots carried green plastids in all developmental layers. The remaining 49 Int-expressing plants had either exclusively aurea (24) or variegated (25) leaves with aurea and green sectors. The formation of homoplastomic green shoots with the minor green ptDNA in all developmental layers suggests that the ptDNA population in a regenerating shoot apical meristem derives from a small number of copies selected through a stochastic process.

Construction of a tobacco master line to improve Rubisco engineering in chloroplasts

The inability to assemble Rubisco from any photosynthetic eukaryote within Escherichia coli has hampered structure-function studies of higher plant Rubisco. Precise genetic manipulation of the tobacco chloroplast genome (plastome) by homologous recombination has facilitated the successful production of transplastomic lines that have either mutated the Rubisco large subunit (L) gene, rbcL, or replaced it with foreign variants. Here the capacity of a new tobacco transplastomic line, (cm)trL, to augment future Rubisco engineering studies is demonstrated. Initially the rbcL was replaced with the selectable marker gene, aadA, and an artificial codon-modified (cm)rbcM gene that codes for the structurally novel Rubisco dimer (L(2), approximately 100 kDa) from Rhodosprillum rubrum. To obtain (cm)trL, the aadA was excised by transiently introducing a T-DNA encoding CRE recombinase biolistically. Selection using aadA enabled transplantation of mutated and wild-type tobacco Rubisco genes into the (cm)trL plastome with an efficiency that was 3- to 10-fold higher than comparable transformations into wild-type tobacco. Transformants producing the re-introduced form I tobacco Rubisco variants (hexadecamers comprising eight L and eight small subunits, approximately 520 kDa) were identified by non-denaturing PAGE with fully segregated homoplasmic lines (where no L(2) Rubisco was produced) obtained within 6-9 weeks after transformation which enabled their Rubisco kinetics to be quickly examined. Here the usefulness of (cm)trL in more readily examining the production, folding, and assembly capabilities of both mutated tobacco and foreign form I Rubisco subunits in tobacco plastids is discussed, and the feasibility of quickly assessing the kinetic properties of those that functionally assemble is demonstrated.

A guide to choosing vectors for transformation of the plastid genome of higher plants

Plastid transformation, originally developed in tobacco (Nicotiana tabacum), has recently been extended to a number of crop species enabling in vivo probing of plastid function and biotechnological applications. In this article we report new plastid vectors that enable insertion of transgenes in the inverted repeat region of the plastome between the trnV and 3'rps12 or trnI and trnA genes. Efficient recovery of transplastomic clones is ensured by selection for spectinomycin (aadA) or kanamycin (neo) resistance genes. Expression of marker genes can be verified using commercial antibodies that detect the accumulation of neomycin phosphotranseferase II, the neo gene product, or the C-terminal c-myc tag of aminoglycoside-3''-adenylytransferase, encoded by the aadA gene. Aminoglycoside-3''-adenylytransferase, the spectinomycin inactivating enzyme, is translationally fused with green fluorescent protein in two vectors so that transplastomic clones can be selected by spectinomycin resistance and visually identified by fluorescence in ultraviolet light. The marker genes in the new vectors are flanked by target sites for Cre or Int, the P1 and phiC31 phage site-specific recombinases. When uniform transformation of all plastid genomes is obtained, the marker genes can be excised by Cre or Int expressed from a nuclear gene. Choice of expression signals for the gene of interest, complications caused by the presence of plastid DNA sequences recognized by Cre, and loss of transgenes by homologous recombination via duplicated sequences are also discussed to facilitate a rational choice from among the existing vectors and to aid with new target-specific vector designs.

Direct creation of marker-free tobacco plants from agroinfiltrated leaf discs

Agroinfiltration is employed as a fast way to directly create marker-free transgenic tobacco plants. As an example for the efficiency of the method, Agrobacterium cells harboring a marker-free vector coding for beta-glucuronidase (GUS) were infiltrated into the leaf discs of Nicotiana tabacum, which were then used as explants for marker-free plant regeneration by tissue culture. Through GUS staining, a large number of small calli were shown to be stably transformed on the treated leaf discs at 17 days after agroinfiltration. Most importantly, after continuous culture of the leaf discs until shoot regeneration, about 15% of the regenerants were proven to be transformants by polymerase chain reaction (PCR) analysis.

A Cre/loxP-mediated self-activating gene excision system to produce marker gene free transgenic soybean plants

Marker-gene-free transgenic soybean plants were produced by isolating a developmentally regulated embryo-specific gene promoter, app1, from Arabidopsis and developing a self-activating gene excision system using the P1 bacteriophage Cre/loxP recombination system. To accomplish this, the Cre recombinase gene was placed under control of the app1 promoter and, together with a selectable marker gene (hygromycin phosphotransferase), were cloned between two loxP recombination sites. This entire sequence was then placed between a constitutive promoter and a coding region for either beta-glucuronidase (Gus) or glyphosate acetyltransferase (Gat). Gene excision would remove the entire sequence between the two loxP sites and bring the coding region to the constitutive promoter for expression. Using this system marker gene excision occurred in over 30% of the stable transgenic events as indicated by the activation of the gus reporter gene or the gat gene in separate experiments. Transgenic plants with 1 or 2 copies of a functional excision-activated gat transgene and without any marker gene were obtained in T0 or T1 generation. This demonstrates the feasibility of using developmentally controlled promoters to mediate marker excision in soybean.

The genetic transformation of plastids

Biolistic delivery of DNA initiated plastid transformation research and still is the most widelyused approach to generate transplastomic lines in both algae and higher plants. The principal designof transformation vectors is similar in both phylogenetic groups. Although important additions tothe list of species transformed in their plastomes have been made in algae and in higher plants, thekey organisms in the area are still the two species, in which stable plastid transformation was initiallysuccessful, i.e., Chlamydomonas reinhardtii and tobacco. Basicresearch into organelle biology has substantially benefited from the homologous recombination-basedcapability to precisely insert at predetermined loci, delete, disrupt, or exchange plastid genomesequences. Successful expression of recombinant proteins, including pharmaceutical proteins, hasbeen demonstrated in Chlamydomonas as well as in higher plants,where some interesting agronomic traits were also engineered through plastid transformation.

Plastid marker gene excision by the phiC31 phage site-specific recombinase

Marker genes are essential for selective amplification of rare transformed plastid genome copies to obtain genetically stable transplastomic plants. However, the marker gene becomes dispensable when homoplastomic plants are obtained. Here we report excision of plastid marker genes by the phiC31 phage site-specific integrase (Int) that mediates recombination between bacterial (attB) and phage (attP) attachment sites. We tested marker gene excision in a two-step process. First we transformed the tobacco plastid genome with the pCK2 vector in which the spectinomycin resistance (aadA) marker gene is flanked with suitably oriented attB and attP sites. The transformed plastid genomes were stable in the absence of Int. We then transformed the nucleus with a gene encoding a plastid-targeted Int that led to efficient marker gene excision. The aadA marker free Nt-pCK2-Int plants were resistant to phosphinothricin herbicides since the pCK2 plastid vector also carried a bar herbicide resistance gene that, due to the choice of its promoter, causes a yellowish-golden (aurea) phenotype. Int-mediated marker excision reported here is an alternative to the currently used CRE/loxP plastid marker excision system and expands the repertoire of the tools available for the manipulation of the plastid genome.

Exceptional transmission of plastids and mitochondria from the transplastomic pollen parent and its impact on transgene containment

Plastids in Nicotiana tabacum are normally transmitted to the progeny by the maternal parent only. However, low-frequency paternal plastid transmission has been reported in crosses involving parents with an alien cytoplasm. Our objective was to determine whether paternal plastids are transmitted in crosses between parents with the normal cytoplasm. The transplastomic father lines carried a spectinomycin resistance (aadA) transgene incorporated in the plastid genome. The mother lines in the crosses were either (i) alloplasmic, with the Nicotiana undulata cytoplasm that confers cytoplasmic male sterility (CMS92) or (ii) normal, with the fertile N. tabacum cytoplasm. Here we report that plastids from the transplastomic father were transmitted in both cases at low (10(-4)-10(-5)) frequencies; therefore, rare paternal pollen transmission is not simply due to breakdown of normal controls caused by the alien cytoplasm. Furthermore, we have found that the entire plastid genome was transmitted by pollen rather than small plastid genome (ptDNA) fragments. Interestingly, the plants, which inherited paternal plastids, also carried paternal mitochondrial DNA, indicating cotransmission of plastids and mitochondria in the same pollen. The detection of rare paternal plastid transmission described here was facilitated by direct selection for the transplastomic spectinomycin resistance marker in tissue culture; therefore, recovery of rare paternal plastids in the germline is less likely to occur under field conditions.

GM maize from site-specific recombination technology, what next?

The term plant genetic engineering has long conveyed a highly efficient and precise process for the manipulation of plant genomes. For nearly two decades, research on recombinase-based applications has steadily advanced the surgical capabilities of plant genome rearrangements. Once considered interesting laboratory exercises, a first crop plant derived from this type of DNA acrobatics is heading to market. Originally configured for a specific application, to remove a selectable marker, it could be the first of more to come - and not just market-free plants.

Construction of marker-free transplastomic plants

Because of its prokaryotic-type gene expression machinery, maternal inheritance and the opportunity to express proteins at a high level, the plastid genome (plastome or ptDNA) is an increasingly popular target for engineering. The ptDNA is present as up to 10,000 copies per cell, making selection for marker genes essential to obtain plants with uniformly transformed ptDNA. However, the marker gene is no longer desirable when homoplastomic plants are obtained. Marker-free transplastomic plants can now be obtained with four recently developed protocols: homology-based excision via directly repeated sequences, excision by phage site-specific recombinanses, transient cointegration of the marker gene, and the cotransformation-segregation approach. Marker excision technology will benefit applications in agriculture and in molecular farming.

Generation and characterization of soybean and marker-free tobacco plastid transformants over-expressing a bacterial 4-hydroxyphenylpyruvate dioxygenase which provides strong herbicide tolerance

Plant 4-hydroxyphenylpyruvate dioxygenase (HPPD) is part of the biosynthetic pathway leading to plastoquinone and vitamin E. This enzyme is also the molecular target of various new bleaching herbicides for which genetically engineered tolerant crops are being developed. We have expressed a sensitive bacterial hppd gene from Pseudomonas fluorescens in plastid transformants of tobacco and soybean and characterized in detail the recombinant lines. HPPD accumulates to approximately 5% of total soluble protein in transgenic chloroplasts of both species. As a result, the soybean and tobacco plastid transformants acquire a strong herbicide tolerance, performing better than nuclear transformants. In contrast, the over-expression of HPPD has no significant impact on the vitamin E content of leaves or seeds, quantitatively or qualitatively. A new strategy is presented and exemplified in tobacco which allows the rapid generation of antibiotic marker-free plastid transformants containing the herbicide tolerance gene only. This work reports, for the first time, the plastome engineering for herbicide tolerance in a major agronomic crop, and a technology leading to marker-free lines for this trait.

Transformation of the plastid genome to study RNA editing

In this chapter we provide an overview of cytosine-to-uridine (C-to-U) RNA editing in the plastids of higher plants. Particular emphasis will be placed on the role plastid transformation played in understanding the editing process. We discuss how plastid transformation enabled identification of mRNA cis elements for editing and gave the first insight into the role of editing trans factors. The introduction will be followed by a protocol for plastid transformation, including vector design employed to identify editing cis elements. We also discuss how to test RNA editing in vivo by cDNA sequencing. At the end, we summarize the status of the field and outline future directions.

Methods to produce marker-free transgenic plants

Selectable marker genes (SMGs) have been extraordinarily useful in enabling plant transformation because of the low efficiency of transgene integration. The most used SMGs encode proteins resistant to antibiotics or herbicides and use negative selection, i.e., by killing nontransgenic tissue. However, there are perceived risks in wide-scale deployment of SMG-transgenic plants, and therefore research has recently been performed to develop marker-free systems. In this review, transformation using markers not based on antibiotic or herbicide resistance genes, as well as different systems of marker gene deletion, are discussed.

Expression of the cry9Aa2 B.t. gene in tobacco chloroplasts confers resistance to potato tuber moth

We report here the control of potato tuber moth (Phthorimaea operculella) by incorporating a truncated Bacillus thuringiensis cry9Aa2 gene in the plastid genome. Plasmids pSKC84 and pSKC85 are derivatives of a new polycistronic plastid transformation vector, pPRV312L, that carries spectinomycin resistance (aadA) as a selective marker and targets insertions in the trnI-trnA intergenic region. The Cry9Aa2 N-terminal region (82.1 kDa; 734 amino acids) was expressed in a cassette, which consists of 49 nucleotides of the cry9Aa2 leader and the 3'-untranslated region of the plastid rbcL gene (TrbcL), and relies on readthrough transcription from the plastid rRNA operon. In a tobacco leaf bioassay, expression of Cry9Aa2 conferred resistance to potato tuber moth. In accordance, the Cry9Aa2 insecticidal protein accumulated to high levels, approximately 10% of the total soluble cellular protein and approximately 20% in the membrane fraction. However, high-level Cry9Aa2 expression significantly delayed plant development. Thus, a practical system to control potato tuber moth by Cry9Aa2 expression calls for down-regulation of its expression.

Gene activation in plastids by the CRE site-specific recombinase

We developed a novel system for gene activation in plastids that uses the CRE/loxP site-specific recombination system to create a translatable reading frame by excision of a blocking sequence. To test the system, we introduced an inactive gfp* gene into the tobacco plastid genome downstream of the selectable spectinomcyin resistance (aadA) marker gene. The aadA gene is the blocking sequence, and is flanked by directly oriented loxP sites for excision by the CRE. In the non-activated state, gfp* is transcribed from the aadA promoter, but the mRNA is not translated due to the lack of an AUG translation initiation codon. Green Fluorescent Protein (GFP) expression is activated by excision of the aadA coding segment to link up the gfp* coding region with the translation initiation codon of aadA. Tobacco plants that carry the inactive gfp* gene do not contain detectable levels of GFP. However, activation of gfp* resulted in GFP accumulation, proving the utility of CRE-induced protein expression in tobacco chloroplasts. The gene activation system described here will be useful to probe plastid gene function and for the production of recombinant proteins in chloroplasts.

Isolation of precise plastid deletion mutants by homology-based excision: a resource for site-directed mutagenesis, multi-gene changes and high-throughput plastid transformation

We describe a simple and efficient homology-based excision method to delete plastid genes. The procedure allows one or more adjacent plastid genes to be deleted without the retention of a marker gene. We used aadA-based transformation to duplicate a 649 bp region of plastid DNA corresponding to the atpB promoter region. Efficient recombination between atpB repeats deletes the intervening foreign genes and 1,984 bp of plastid DNA (co-ordinates 57,424-59,317) containing the rbcL gene. Only five foreign bases are present in DeltarbcL plants illustrating the precision of homology-based excision. Sequence analysis of non-functional rbcL-related sequences in DeltarbcL plants indicated an extra-plastidic origin. Mutant DeltarbcL plants were heterotrophic, pale-green and contained round plastids with reduced amounts of thylakoids. Restoration of autotrophy and leaf pigmentation following aadA-based transformation with the wild-type rbcL gene ruled out mutations in other genes. Excision and re-use of aadA shows that, despite the multiplicity of plastid genomes, homology-based excision ensures complete removal of functional aadA genes. Rescue of the DeltarbcL mutation and autotrophic growth stabilizes transgenic plastids in heteroplasmic transformants following antibiotic withdrawal, enhancing the overall efficiency of plastid transformation. Unlike the available set of homoplasmic knockout mutants in 25 plastid genes, the rbcL deletion mutant isolated here is readily transformed with the efficient aadA marker gene. This improvement in deletion design facilitates advanced studies that require the isolation of double mutants in distant plastid genes and the replacement of the deleted locus with site-directed mutant alleles and is not easily achieved using other methods.

Construction of marker-free transplastomic tobacco using the Cre-loxP site-specific recombination system

Incorporation of a selectable marker gene in the plastid genome is essential to uniformly alter the thousands of genome copies in a tobacco cell. When transformation is accomplished, however, the marker gene becomes undesirable. Here we describe plastid transformation vectors, the method of plastid transformation using tobacco leaves and alternative protocols for marker gene excision with the P1 bacteriophage Cre-loxP site-specific recombination system. Plastid vectors carry a marker gene flanked with directly oriented loxP sites and a gene of interest, which are introduced into plastids by the biolistic process. The transforming DNA integrates into the plastid genome by homologous recombination via plastid targeting sequences. Marker gene excision is accomplished by a plastid-targeted Cre protein expressed from a nuclear gene. Expression may be from an integrated gene introduced by Agrobacterium transformation (Transformation Protocol), by pollination (Pollination Protocol) or from a transient, non-integrated T-DNA (Transient Protocol). Transplastomic plants are obtained in about 3 months, yielding seed after 2 months. The time required to remove the plastid marker and nuclear genes and to obtain seed takes 10-16 months, depending on which protocol is used.