Abdominal hernia repair with a decellularized dermal scaffold seeded with autologous bone marrow-derived mesenchymal stem cells

Abdominal wall hernia repair: from prosthetic meshes to smart materials

Hernia reconstruction is one of the most frequently practiced surgical procedures worldwide. Plastic surgery plays a pivotal role in reestablishing desired abdominal wall structure and function without the drawbacks traditionally associated with general surgery as excessive tension, postoperative pain, poor repair outcomes, and frequent recurrence. Surgical meshes have been the preferential choice for abdominal wall hernia repair to achieve the physical integrity and equivalent components of musculofascial layers. Despite the relevant progress in recent years, there are still unsolved challenges in surgical mesh design and complication settlement. This review provides a systemic summary of the hernia surgical mesh development deeply related to abdominal wall hernia pathology and classification. Commercial meshes, the first-generation prosthetic materials, and the most commonly used repair materials in the clinic are described in detail, addressing constrain side effects and rational strategies to establish characteristics of ideal hernia repair meshes. The engineered prosthetics are defined as a transit to the biomimetic smart hernia repair scaffolds with specific advantages and disadvantages, including hydrogel scaffolds, electrospinning membranes, and three-dimensional patches. Lastly, this review critically outlines the future research direction for successful hernia repair solutions by combing state-of-the-art techniques and materials.

Cell-based therapies for reinforcing the treatment efficacy of meshes in abdominal wall hernias：A systematic review and meta-analysis

To achieve a tension-free repair and reduce the recurrence rate of abdominal wall hernias (AWHs), various kinds of meshes have been applied in surgery. However, these meshes are reported to have problems with adhesion, infection, chronic pain and foreign body sensation. Recently, the introduction of cellular components on meshes seems to provide a new alternative to resolve these problems. This study aimed to evaluate the treatment efficacy of meshes seeded with cells (mesh-cell group) for AWHs, compared to meshes without cells (mesh group). Cochrane Library, Web of Science and PubMed were searched for studies that provided data about meshes, cells and AWHs. Twenty-six studies involving 578 animals were included. We found that the mesh-cell group could better control hernia recurrent than the mesh group (OR = 0.25, 95% CI = 0.15-0.42). Although the mesh-cell group did not reduce the incidence of adhesions (OR = 0.67, 95% CI = 0.26-1.74), it alleviated the extent of adhesions (WMD = -1.48, 95% CI = -1.86 to -1.10). In addition, the capillary density of mesh-cell group was also higher than that of mesh group (WMD = 26.27, 95% CI = 14.45-38.09). For incidence of infection, the two groups had no significant differences (OR = 0.94, 95% CI = 0.39-2.31). On the basis of our current evidence, AWHs were likely to receive a satisfied outcome in animal models when treated by meshes seeded with cells. Future studies with human trial data are needed to validate these findings.

The Effect of Adipose-Derived Stromal Vascular Fraction Cells to Abdominal Wall Fascia Defects in Rats: An Experimental Study

OBJECTIVE

Various synthetic and biological meshes have been developed to reduce recurrence and complications in ventral incisional hernia repairs. Adipose tissue is a rich reserve for mesenchymal stromal cells. In the present study we aimed to examine the effects of adipose-derived mesenchymal stromal cells (AD-MSCs) on abdominal incisional hernia repairs in rats.

MATERIALS AND METHODS

The study involved 32 male Wistar-Albino rats, weighing 200-250 g, which were divided into three groups. In Group 1 (control group) only an incisional hernia model was created. In Group 2, the incisional hernia model was created and 1 ml stromal vascular fraction (SVF), obtained from inguinal lipectomy material and containing mesenchymal stromal cells, was injected into the edges of the defect in the same session. In Group 3, only the incisional hernia model was created in the first stage and after 14 days, 1 ml of SVF was injected into the edges of the defect. Skin incisions of rats in Group 1 and 2 were opened on postoperative day 28 while in group 3 were opened on day 42. Peritoneal formation in abdominal wall defect was evaluated macroscopically and histopathologically.

RESULTS

Peritoneal formation was significantly superior in Groups 2 and 3 than in Group 1 (p: 0.031). In histopathological evaluation, the structural distortion and polymorphonuclear leukocyte (PMNL) levels were significantly higher in Group 1 than in Group 3 (p: 0.048 and p: 0.046, respectively). Granulation, capillary density, fibrosis and collagen organization were higher in Group 2 and 3, however this difference was not statistically significant (p > 0.05).

CONCLUSIONS

Adipose-derived stromal vascular fraction cells obtained from inguinal lipectomy material in rats positively affect the repair of abdominal incisional hernias by increasing peritoneal formation, and reducing structural distortion and PMNL infiltration.

Laparoscopy for the Treatment of Congenital Hernia: Use of Surgical Meshes and Mesenchymal Stem Cells in a Clinically Relevant Animal Model

More than a century has passed since the first surgical mesh for hernia repair was developed, and, to date, this is still the most widely used method despite the great number of complications it poses. The purpose of this study was to combine stem cell therapy and laparoscopy for the treatment of congenital hernia in a swine animal model. Porcine bone marrow-derived mesenchymal stem cells (MSCs) were seeded on polypropylene surgical meshes using a fibrin sealant solution as a vehicle. Meshes with (cell group) or without (control group) MSCs were implanted through laparoscopy in Large White pigs with congenital abdominal hernia after the approximation of hernia borders (implantation day). A successive laparoscopic biopsy of the mesh and its surrounding tissues was performed a week after implantation, and surgical meshes were excised a month after implantation. Ultrasonography was used to measure hernia sizes. Flow cytometry, histological, and gene expression analyses of the biopsy and necropsy samples were performed. The fibrin sealant solution was easy to prepare and preserved the viability of MSCs in the surgical meshes. Ultrasonography demonstrated a significant reduction in hernia size 1 week after implantation in the cell group relative to that on the day of implantation (p < 0.05). Flow cytometry of the mesh-infiltrated cells showed a non-significant increase of M2 macrophages when the cell group was compared with the control group 1 week after implantation. A significant decrease in the gene expression of VEGF and a significant increase in TNF expression were determined in the cell group 1 month after implantation compared with gene expressions in the control group (p < 0.05). Here, we propose an easy and feasible method to combine stem cell therapy and minimally invasive surgical techniques for hernia repair. In this study, stem cell therapy did not show a great immunomodulatory or regenerative effect in overcoming hernia-related complications. However, our clinically relevant animal model with congenital hernia closely resembles the clinical human condition. Further studies should be focused on this valuable animal model to evaluate stem cell therapies in hernia surgery.

Stromal vascular fraction cells as biologic coating of mesh for hernia repair

Background

The interest in non-manipulated cells originating from adipose tissue has raised tremendously in the field of tissue engineering and regenerative medicine. The resulting stromal vascular fraction (SVF) cells have been successfully used in numerous clinical applications. The aim of this experimental work is, first to combine a macroporous synthetic mesh with SVF isolated using a mechanical disruption process, and to assess the effect of those cells on the early healing phase of hernia.

Methods

Human SVF cells combined with fibrin were used to coat commercial titanized polypropylene meshes. In vitro, viability and growth of the SVF cells were assessed using live/dead staining and scanning electron microscopy. The influence of SVF cells on abdominal wall hernia healing was conducted on immunodeficient rats, with a focus on short-term vascularization and fibrogenesis.

Results

Macroporous meshes were easily coated with SVF using a fibrin gel as temporary carrier. The in vitro experiments showed that the whole process including the isolation of human SVF cells and their coating on PP meshes did not impact on the SVF cells’ viability and on their capacity to attach and to proliferate. In vivo, the SVF cells were well tolerated by the animals, and coating mesh with SVF resulted in a decrease degree of vascularity compared to control group at day 21.

Conclusions

The utilization of SVF-coated mesh influences the level of angiogenesis during the early onset of tissue healing. Further long-term animal experiments are needed to confirm that this effect correlates with a more robust mesh integration compared to non-SVF-coated mesh.

Biomaterial Implants in Abdominal Wall Hernia Repair: A Review on the Importance of the Peritoneal Interface

Biomaterials have long been used to repair defects in the clinical setting, which has led to the development of a wide variety of new materials tailored to specific therapeutic purposes. The efficiency in the repair of the defect and the safety of the different materials employed are determined not only by the nature and structure of their components, but also by the anatomical site where they will be located. Biomaterial implantation into the abdominal cavity in the form of a surgical mesh, such as in the case of abdominal hernia repair, involves the contact between the foreign material and the peritoneum. This review summarizes the different biomaterials currently available in hernia mesh repair and provides insights into a series of peculiarities that must be addressed when designing the optimal mesh to be used in this interface.

Meshes in a mess: Mesenchymal stem cell-based therapies for soft tissue reinforcement

Surgical meshes are frequently used for the treatment of abdominal hernias, pelvic organ prolapse, and stress urinary incontinence. Though these meshes are designed for tissue reinforcement, many complications have been reported. Both differentiated cell- and mesenchymal stem cell-based therapies have become attractive tools to improve their biocompatibility and tissue integration, minimizing adverse inflammatory reactions. However, current studies are highly heterogeneous, making it difficult to establish comparisons between cell types or cell coating methodologies. Moreover, only a few studies have been performed in clinically relevant animal models, leading to contradictory results. Finally, a thorough understanding of the biological mechanisms of mesenchymal stem cells in the context of foreign body reaction is lacking. This review aims to summarize in vitro and in vivo studies involving the use of differentiated and mesenchymal stem cells in combination with surgical meshes. According to preclinical and clinical studies and considering the therapeutic potential of mesenchymal stem cells, it is expected that these cells will become valuable tools in the treatment of pathologies requiring tissue reinforcement. STATEMENT OF SIGNIFICANCE: The implantation of surgical meshes is the standard procedure to reinforce tissue defects such as hernias. However, an adverse inflammatory response secondary to this implantation is frequently observed, leading to a strong discomfort and chronic pain in the patients. In many cases, an additional surgical intervention is needed to remove the mesh. Both differentiated cell- and stem cell-based therapies have become attractive tools to improve biocompatibility and tissue integration, minimizing adverse inflammatory reactions. However, current studies are incredibly heterogeneous and it is difficult to establish a comparison between cell types or cell coating methodologies. This review aims to summarize in vitro and in vivo studies where differentiated and stem cells have been combined with surgical meshes.

Decellularized extracellular matrix microparticles seeded with bone marrow mesenchymal stromal cells for the treatment of full-thickness cutaneous wounds

Extracellular matrix materials mechanically dissociated into submillimeter particles have a larger surface area than sheet materials and enhanced cellular attachment. Decellularized porcine mesothelial extracellular matrix microparticles were seeded with bone marrow-derived mesenchymal stromal cells and cultured in a rotating bioreactor. The mesenchymal stromal cells attached and grew to confluency on the microparticles. The cell-seeded microparticles were then encapsulated in varying concentrations of fibrin glue, and the cells migrated rapidly off the microparticles. The combination of microparticles and mesenchymal stromal cells was then applied to a splinted full-thickness cutaneous in vivo wound model. There was evidence of increased cell infiltration and collagen deposition in mesenchymal stromal cells-treated wounds. Cell-seeded microparticles have potential as a cell delivery and paracrine therapy in impaired healing environments.

Endometrial Mesenchymal Stem/Stromal Cells Modulate the Macrophage Response to Implanted Polyamide/Gelatin Composite Mesh in Immunocompromised and Immunocompetent Mice

The immunomodulatory properties of human endometrial mesenchymal stem cells (eMSC) have not been well characterised. Initial studies showed that eMSC modulated the chronic inflammatory response to a non-degradable polyamide/gelatin mesh in a xenogeneic rat skin wound repair model, but the mechanism remains unclear. In this study, we investigated the immunomodulatory effect of eMSC on the macrophage response to polyamide/gelatin composite mesh in an abdominal subcutaneous wound repair model in C57BL6 immunocompetent and NSG (NOD-Scid-IL2Rgamma^null) immunocompromised mice to determine whether responses differed in the absence of an adaptive immune system and NK cells. mCherry lentivirus-labelled eMSC persisted longer in NSG mice, inducing longer term paracrine effects. Inclusion of eMSC in the mesh reduced inflammatory cytokine (Il-1β, Tnfα) secretion, and in C57BL6 mice reduced CCR7⁺ M1 macrophages surrounding the mesh on day 3 and increased M2 macrophage marker mRNA (Arg1, Mrc1, Il10) expression at days 3 and 7. In NSG mice, these effects were delayed and only observed at days 7 and 30 in comparison with controls implanted with mesh alone. These results show that the differences in the immune status in the two animals directly affect the survival of xenogeneic eMSC which leads to differences in the short-term and long-term macrophage responses to implanted meshes.

Collagen skin, a water-sensitive shape memory material

The water sensitive shape memory ability of collagen skin and its mechanism in terms of morphology and structures were revealed.

Generation and Evaluation of Novel Stromal Cell-Containing Tissue Engineered Artificial Stromas for the Surgical Repair of Abdominal Defects

Repair of abdominal wall defects is one of the major clinical challenges in abdominal surgery. Most biomaterials are associated to infection and severe complications, making necessary safer and more biocompatible approaches. In the present work, the adequate mechanical properties of synthetic polymer meshes with tissue-engineered matrices containing stromal mesenchymal cells is combined to generate a novel cell-containing tissue-like artificial stroma (SCTLAS) for use in abdominal wall repair. SCTLAS consisting on fibrin-agarose hydrogels seeded with stromal cells and reinforced with commercial surgical meshes (SM) are evaluated in vitro and in vivo in animal models of abdominal wall defect. Inflammatory cells, collagen, and extracellular matrix (ECM) components are analyzed and compared with grafted SM. Use of SCTLAS results in less inflammation and less fibrosis than SM, with most ECM components being very similar to control abdominal wall tissues. Cell migration and ECM remodeling within SCTLAS is comparable to control tissues. The use of SCTLAS could contribute to reduce the side-effects associated to currently available SM and regenerated tissues are more similar to control abdominal wall tissues. Bioengineered SCTLAS could contribute to a safer treatment of abdominal wall defects with higher biocompatibility than currently available SM.

Evaluation of a Novel Hybrid Viable Bioprosthetic Mesh in a Model of Mesh Infection

Background:

The reported incidence of mesh infection in contaminated operative fields is as high as 30% regardless of material used. Our laboratory previously showed that augmenting acellular bioprosthetic mesh with allogeneic mesenchymal stem cells (MSC) enhances resistance to bacterial colonization in vivo and preserves mesh integrity. This study’s aim was to determine whether augmentation of non-crosslinked porcine dermis (Strattice) with commercially available, cryopreserved, viable MSC-containing human placental tissue (Stravix) similarly improves infection resistance after inoculation with Escherichia coli (E. coli) using an established mesh infection model.

Methods:

Stravix was thawed per manufacturer’s instructions and 2 samples were tested for cell viability using a Live/Dead Cell assay at the time of surgery. Rats (N = 20) were implanted subcutaneously with 1 piece of Strattice and 1 piece of hybrid mesh (Strattice + Stravix sutured at the corners). Rats were inoculated with either sterile saline or 10⁶ colony-forming units of E. coli before wound closure (n = 10 per group). At 4 weeks, explants underwent microbiologic and histologic analyses.

Results:

In E. coli–inoculated animals, severe or complete mesh degradation concurrent with abscess formation was observed in 100% (10/10) hybrid meshes and 90% (9/10) Strattice meshes. Histologic evaluation determined that meshes inoculated with E. coli exhibited severe acute inflammation, which correlated with bacterial recovery (P < 0.001). Viability assays performed at the time of surgery failed to verify the presence of numerous live cells in Stravix.

Conclusions:

Stravix cryopreserved MSC-containing human umbilical tissue does not improve infection resistance of a bioprosthetic mesh in vivo in rats after inoculation with E. coli.

Improvement of mesh recolonization in abdominal wall reconstruction with adipose vs. bone marrow mesenchymal stem cells in a rodent model

BACKGROUND

Reconstruction of muscle defects remains a challenge. Our work assessed the potential of an engineered construct made of a human acellular collagen matrix (HACM) seeded with porcine mesenchymal stem cells (MSCs) to reconstruct abdominal wall muscle defects in a rodent model.

METHODS

This study compared 2 sources of MSCs (bone-marrow, BMSCs, and adipose, ASCs) in vitro and in vivo for parietal defect reconstruction. Cellular viability and growth factor release (VEGF, FGF-Beta, HGF, IGF-1, TGF-Beta) were investigated under normoxic/hypoxic culture conditions. Processed and recellularized HACMs were mechanically assessed. The construct was tested in vivo in full thickness abdominal wall defect treated with HACM alone vs. HACM+ASCs or BMSCs (n=14). Tissue remodeling was studied at day 30 for neo-angiogenesis and muscular reconstruction.

RESULTS

A significantly lower secretion of IGF was observed with ASCs vs. BMSCs under hypoxic conditions (-97.6%, p<0.005) whereas significantly higher VEGF/FGF secretions were found with ASCs (+92%, p<0.001 and +72%, p<0.05, respectively). Processing and recellularization did not impair the mechanical properties of the HACM. In vivo, angiogenesis and muscle healing were significantly improved by the HACM+ASCs in comparison to BMSCs (p<0.05) at day 30.

CONCLUSION

A composite graft made of an HACM seeded with ASCs can improve muscle repair by specific growth factor release in hypoxic conditions and by in vivo remodeling (neo-angiogenesis/graft integration) while maintaining mechanical properties.

Challenging abdominal incisional hernia repaired with platelet-rich plasma and bone marrow-derived mesenchymal stromal cells. A case report

•

New treatment options for challenging procedures in hernia surgery are necessary.

•

Possibility of improving prosthetic compatibility and reducing future recurrences.

•

Tissue engineering offers new strategies to improve fascial healing.

•

Case of a surgeon – challenging abdominal incisional hernia.

•

Treatment provided was PRP and BM-MSCs on a biological mesh.

Introduction

The necessity to develop new treatment options for challenging procedures in hernia surgery is becoming even more evident and tissue engineering and biological technologies offer even newer strategies to improve fascial healing. The present case reports a patient-tailored surgical technique performed to repair a grade IV abdominal incisional hernia, with a combined use of platelet-rich plasma and bone marrow-derived mesenchymal stromal cells, implanted on a biological mesh.

Presentation of the case

A 71 year-old female patient complained of an abdominal incisional hernia, complicated by enterocutaneous fistula, four-months following laparostomy. Contrast enhanced computed tomography showed an incisional hernia defect of 15.5 × 20 cm, with a subcutaneous abscess and an intestinal loop adherent to the anterior abdominal wall, with a concomitant enterocutaneous fistula. Surgery involved abdominal wall standardized technique closure, with in addition platelet-rich plasma and bone marrow-derived mesenchymal stromal cells implanted on a biological mesh. Two years follow up showed no recurrences of incisional hernia.

Discussion

Coating surgical meshes with patient’s own cells may improve biocompatibility, by reducing inflammation and adhesion formation. Moreover, platelet-rich plasma is a good source of growth factors for wound healing, as well as a good medium for bone marrow multinucleate cells introduction into fascial repair.

Conclusion

This approach is likely to improve abdominal wall repair in high grade (IV) incisional hernia, with the real possibility of improving prosthetic compatibility and reducing future recurrences. The authors agree with the necessity of further studies and trials to assure the safety profile and superiority of this procedure.

Preparation of a nano- and micro-fibrous decellularized scaffold seeded with autologous mesenchymal stem cells for inguinal hernia repair

Prosthetic meshes used for hernioplasty are usually complicated with chronic pain due to avascular fibrotic scar or mesh shrinkage. In this study, we developed a tissue-engineered mesh (TEM) by seeding autologous bone marrow-derived mesenchymal stem cells onto nanosized fibers decellularized aorta (DA). DA was achieved by decellularizing the aorta sample sequentially with physical, mechanical, biological enzymatic digestion, and chemical detergent processes. The tertiary structure of DA was constituted with micro-, submicro-, and nanosized fibers, and the original strength of fresh aorta was retained. Inguinal hernia rabbit models were treated with TEMs or acellular meshes (AMs). After implantation, TEM-treated rabbit models showed no hernia recurrence, whereas AM-treated animals displayed bulges in inguinal area. At harvest, TEMs were thicker, have less adhesion, and have stronger mechanical strength compared to AMs (P<0.05). Moreover, TEM showed better cell infiltration, tissue regeneration, and neovascularization (P<0.05). Therefore, these cell-seeded DAs with nanosized fibers have potential for use in inguinal hernioplasty.

Strategies to reduce the intracellular effects of iron oxide nanoparticle degradation

Mesenchymal stem cells (MSCs) have a significant self-renewal capacity and can differentiate into a variety of cell types. Cell labeling is crucial as it is difficult to detect cell fate after transplantation in vivo. MSCs labeled with iron oxide nanoparticles (IONPs), which can be tracked by MRI, have tremendous potential in regenerative medicine and oncological research. As a part of nanoparticle, the iron oxide core is a key aspect that can exhibit adverse or beneficial effects on MSCs labeled for tracking. Some IONPs exhibit adverse effects, such as cytotoxicity and apoptosis, while other IONPs exhibit beneficial functions that can promote both MSC proliferation and homing efficiency. This review reveals the cytotoxic mechanisms and potential functions of the iron oxide core of IONPs in cell labeling as well as strategies for minimizing the intracellular effects of IONPs.

Effects of Nano-hydroxyapatite/Poly(DL-lactic-co-glycolic acid) Microsphere-Based Composite Scaffolds on Repair of Bone Defects: Evaluating the Role of Nano-hydroxyapatite Content

The aim of the current study was to prepare microsphere-based composite scaffolds made of nano-hydroxyapatite (nHA)/poly (DL-lactic-co-glycolic acid) (PLGA) at different ratios and evaluate the effects of nHA on the characteristics of scaffolds for tissue engineering application. First, microsphere-based composite scaffolds made of two ratios of nHA/PLGA (nHA/PLGA = 20/80 and nHA/PLGA = 50/50) were prepared. Then, the effects of nHA on the wettability, mechanical strength, and degradation of scaffolds were investigated. Second, the biocompatibility and osteoinductivity were evaluated and compared by co-culture of scaffolds with bone marrow stromal stem cells (BMSCs). The results showed that the adhesion, proliferation, and osteogenic differentiation of BMSCs with nHA/PLGA (50/50) were better than those with nHA/PLGA (20/80). Finally, we implanted the scaffolds into femur bone defects in a rabbit model, then the capacity of guiding bone regeneration as well as the in vivo degradation were observed by micro-CT and histological examinations. After 4 weeks' implantation, there was no significant difference on the repair of bone defects. However, after 8 and 12 weeks' implantation, the nHA/PLGA (20/80) exhibited better bone formation than nHA/PLGA (50/50). These results suggested that a proper concentration of nHA in the nHA/PLGA composite should be taken into account when the composite scaffolds were prepared, which plays an important role in the biocompatibility, degradation rate and osteoconductivity.

Collagenopathies-Implications for Abdominal Wall Reconstruction: A Systematic Review

Background:

The etiology of hernia formation is strongly debated and includes mechanical strain, prior surgical intervention, abnormal embryologic development, and increased intraabdominal pressure. Although the most common inciting cause in ventral hernias is previous abdominal surgery, many other factors contribute. We explore this etiology through an examination of the current literature and existing evidence on patients with collagen vascular diseases, such as Ehlers–Danlos syndrome.

Methods:

A systematic review of the published literature was performed of all available Spanish and English language PubMed and Cochrane articles containing the key words “collagenopathies,” “collagenopathy,” “Ehlers-Danlos,” “ventral hernia,” and “hernia.”

Results:

Three hundred fifty-two articles were identified in the preliminary search. After review, 61 articles were included in the final review.

Conclusions:

Multiple authors suggest a qualitative or quantitative defect in collagen formation as a common factor in hernia formation. High-level clinical data clearly linking collagenopathies and hernia formation are lacking. However, a trend in pathologic studies suggests a link between abnormal collagen production and/or processing that is likely associated with hernia development.

Decellularized scaffolds in regenerative medicine

Allogeneic organ transplantation remains the ultimate solution for end-stage organ failure. Yet, the clinical application is limited by the shortage of donor organs and the need for lifelong immunosuppression, highlighting the importance of developing effective therapeutic strategies. In the field of regenerative medicine, various regenerative technologies have lately been developed using various biomaterials to address these limitations. Decellularized scaffolds, derived mainly from various non-autologous organs, have been proved a regenerative capability in vivo and in vitro and become an emerging treatment approach. However, this regenerative capability varies between scaffolds as a result of the diversity of anatomical structure and cellular composition of organs used for decellularization. Herein, recent advances in scaffolds based on organ regeneration in vivo and in vitro are highlighted along with aspects where further investigations and analyses are needed.

Design Strategies and Applications of Biomaterials and Devices for Hernia Repair

Hernia repair is one of the most commonly performed surgical procedures worldwide, with a multi-billion dollar global market. Implant design remains a critical challenge for the successful repair and prevention of recurrent hernias, and despite significant progress, there is no ideal mesh for every surgery. This review summarizes the evolution of prostheses design toward successful hernia repair beginning with a description of the anatomy of the disease and the classifications of hernias. Next, the major milestones in implant design are discussed. Commonly encountered complications and strategies to minimize these adverse effects are described, followed by a thorough description of the implant characteristics necessary for successful repair. Finally, available implants are categorized and their advantages and limitations elucidated, including non-absorbable and absorbable (synthetic and biologically derived) prostheses, composite prostheses, and coated prostheses. This review not only summarizes the state of the art in hernia repair, but also suggests future research directions toward improved hernia repair utilizing novel materials and fabrication methods.

Controlling stem cell behavior with decellularized extracellular matrix scaffolds

Decellularized tissues have become a common regenerative medicine platform with multiple materials being researched in academic laboratories, tested in animal studies, and used clinically. Ideally, when a tissue is decellularized the native cell niche is maintained with many of the structural and biochemical cues that naturally interact with the cells of that particular tissue. This makes decellularized tissue materials an excellent platform for providing cells with the signals needed to initiate and maintain differentiation into tissue-specific lineages. The extracellular matrix (ECM) that remains after the decellularization process contains the components of a tissue specific microenvironment that is not possible to create synthetically. The ECM of each tissue has a different composition and structure and therefore has unique properties and potential for affecting cell behavior. This review describes the common methods for preparing decellularized tissue materials and the effects that decellularized materials from different tissues have on cell phenotype.

Bone Marrow-Derived Mesenchymal Stem Cells Enhance Bacterial Clearance and Preserve Bioprosthetic Integrity in a Model of Mesh Infection

Background:

The reported incidence of mesh infection in contaminated operative fields is as high as 30% regardless of the material used. Recently, mesenchymal stem cells (MSCs) have been shown to possess favorable immunomodulatory properties and improve tissue incorporation when seeded onto bioprosthetics. The aim of this study was to evaluate whether seeding noncrosslinked bovine pericardium (Veritas Collagen Matrix) with allogeneic bone marrow–derived MSCs improves infection resistance in vivo after inoculation with Escherichia coli (E. coli).

Methods:

Rat bone marrow–derived MSCs at passage 3 were seeded onto bovine pericardium and cultured for 7 days before implantation. Additional rats (n = 24) were implanted subcutaneously with MSC-seeded or unseeded mesh and inoculated with 7 × 10⁵ colony-forming units of E. coli or saline before wound closure (group 1, unseeded mesh/saline; group 2, unseeded mesh/E. coli; group 3, MSC-seeded mesh/E. coli; 8 rats per group). Meshes were explanted at 4 weeks and underwent microbiologic and histologic analyses.

Results:

MSC-seeded meshes inoculated with E. coli demonstrated superior bacterial clearance and preservation of mesh integrity compared with E. coli–inoculated unseeded meshes (87.5% versus 0% clearance; p = 0.001). Complete mesh degradation concurrent with abscess formation was observed in 100% of rats in the unseeded/E. coli group, which is in contrast to 12.5% of rats in the MSC-seeded/E. coli group. Histologic evaluation determined that remodeling characteristics of E. coli–inoculated MSC-seeded meshes were similar to those of uninfected meshes 4 weeks after implantation.

Conclusions:

Augmenting a bioprosthetic material with stem cells seems to markedly enhance resistance to bacterial infection in vivo and preserve mesh integrity.

Decellularized extracellular matrix microparticles as a vehicle for cellular delivery in a model of anastomosis healing

Extracellular matrix (ECM) materials from animal and human sources have become important materials for soft tissue repair. Microparticles of ECM materials have increased surface area and exposed binding sites compared to sheet materials. Decellularized porcine peritoneum was mechanically dissociated into 200 µm microparticles, seeded with fibroblasts and cultured in a low gravity rotating bioreactor. The cells avidly attached and maintained excellent viability on the microparticles. When the seeded microparticles were placed in a collagen gel, the cells quickly migrated off the microparticles and through the gel. Cells from seeded microparticles migrated to and across an in vitro anastomosis model, increasing the tensile strength of the model. Cell seeded microparticles of ECM material have potential for paracrine and cellular delivery therapies when delivered in a gel carrier. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1728-1735, 2016.

Fabrication of silk mesh with enhanced cytocompatibility: preliminary in vitro investigation toward cell-based therapy for hernia repair

Recent studies have demonstrated that combining cells with meshes prior to implantation successfully enhanced hernia repair. The idea is to create a biologic coating surrounding the mesh with autologous cells, before transplantation into the patient. However, due to the lack of a prompt and robust cell adhesion to the meshes, extensive in vitro cultivation is required to obtain a homogenous cell layer covering the mesh. In this context, the objective of this publication is to manufacture meshes made of silk fibres and to enhance the cytoadhesion and cytocompatibility of the biomaterial by surface immobilization of a pro-adhesive wheat germ agglutinin (lectin WGA). We first investigated the affinity between the glycoprotein WGA and cells, in solution and then after covalent immobilization of WGA on silk films. Then, we manufactured meshes made of silk fibres, tailored them with WGA grafting and finally evaluated the cytocompatibility and the inflammatory response of silk and silk-lectin meshes compared to common polypropylene mesh, using fibroblasts and peripheral blood mononuclear cells, respectively. The in vitro experiments revealed that the cytocompatibility of silk can be enhanced by surface immobilization with lectin WGA without exhibiting negative response in terms of pro-inflammatory reaction. Grafting lectin to silk meshes could bring advantages to facilitate cell-coating of meshes prior to implantation, which is an imperative prerequisite for abdominal wall tissue regeneration using cell-based therapy.

Living scaffolds: surgical repair using scaffolds seeded with human adipose-derived stem cells

BACKGROUND

Decellularized porcine small intestinal submucosa (SIS) is a biological scaffold used surgically for tissue repair. Here, we demonstrate a model of SIS as a scaffold for human adipose-derived stem cells (ASCs) in vitro and apply it in vivo in a rat ventral hernia repair model.

STUDY DESIGN

ASCs adherence was examined by confocal microscopy and proliferation rate was measured by growth curves. Multipotency of ASCs seeded onto SIS was tested using adipogenic, chondrogenic, and osteogenic induction media. For in vivo testing, midline abdominal musculofascial and peritoneal defects were created in Sprague-Dawley rats. Samples were evaluated for tensile strength, histopathology and immunohistochemistry.

RESULTS

All test groups showed cell adherence and proliferation on SIS. Fibronectin-treated scaffolds retained more cells than those treated with vehicle alone (p < 0.05). Fresh stromal vascular fraction (SVF) pellets containing ASCs were injected onto the SIS scaffold and showed similar results to cultured ASCs. Maintenance of multipotency on SIS was confirmed by lineage-specific markers and dyes. Histopathology revealed neovascularization and cell influx to ASC-seeded SIS samples following animal implantation. ASC-seeded SIS appeared to offer a stronger repair than plain SIS, but these results were not statistically significant. Immunohistochemistry showed continued presence of cells of human origin in ASC-seeded repairs at 1 month postoperation.

CONCLUSION

Pretreatment of the scaffold with fibronectin offers a method to increase cell adhesion and delivery. ASCs maintain their immunophenotype and ability to differentiate while on SIS. Seeding freshly isolated SVF onto the scaffold demonstrated that minimally manipulated cells may be useful for perioperative surgical applications within the OR suite. We have shown that this model for a "living mesh" can be successfully used in abdominal wall reconstruction.

Emerging Trends in Abdominal Wall Reinforcement: Bringing Bio-Functionality to Meshes

Abdominal wall hernia is a recurrent issue world-wide and requires the implantation of over 1 million meshes per year. Because permanent meshes such as polypropylene and polyester are not free of complications after implantation, many mesh modifications and new functionalities have been investigated over the last decade. Indeed, mesh optimization is the focus of intense development and the biomaterials utilized are now envisioned as being bioactive substrates that trigger various physiological processes in order to prevent complications and to promote tissue integration. In this context, it is of paramount interest to review the most relevant bio-functionalities being brought to new meshes and to open new avenues for the innovative development of the next generation of meshes with enhanced properties for functional abdominal wall hernia repair.

Iron oxide-based multifunctional nanoparticulate systems for biomedical applications: a patent review (2008 - present)

INTRODUCTION

Iron oxide nanoparticles (IO NPs) exhibit remarkable properties, including inherent magnetism, biocompatibility, high surface to volume ratio, and versatility of engineering, making them ideal candidates for a variety of clinical applications.

AREAS COVERED

The review provides an in-depth discussion on recent patents and developments related to IO NPs in Biomedicine from the last 7 years. It covers innovations in the chemical synthesis, surface coating and functionalization, and biomedical applications, including MRI and multimodal imaging, molecular imaging, cell labeling, drug delivery, hyperthermia, hyperphosphatemia, and antibacterial activity. A brief outline of the important properties of IO NPs is also presented.

EXPERT OPINION

The main focus of current research is the development of new approaches to generate high-quality IO NPs with optimal properties in terms of particle geometry, crystal structure, surface functionalities, stability, and magnetization. Among chemical synthesis methods, thermal decomposition and hydrothermal synthetics processes allow fine control of the particle properties. Plenty of coating materials have been successfully used as shells for these NPs to provide colloidal stability, even enabling the formulation of nanotheranostics for simultaneous disease diagnosis and therapy. However, long-term toxicity and pharmacokinetic studies are necessary before magnetic nanosystems can be approved for clinical use.

Adipose-derived stem-cell-seeded non-cross-linked porcine acellular dermal matrix increases cellular infiltration, vascular infiltration, and mechanical strength of ventral hernia repairs

Adipose-derived stem cells (ASCs) facilitate wound healing by improving cellular and vascular recruitment to the wound site. Therefore, we investigated whether ASCs would augment a clinically relevant bioprosthetic mesh-non-cross-linked porcine acellular dermal matrix (ncl-PADM)-used for ventral hernia repairs in a syngeneic animal model. ASCs were isolated from the subcutaneous adipose tissue of Brown Norway rats, expanded, and labeled with green fluorescent protein. ASCs were seeded (2.5×10(4) cells/cm(2)) onto ncl-PADM for 24 h before surgery. In vitro ASC adhesion to ncl-PADM was assessed at 0.5, 1, and 2 h after seeding, and cell morphology on ncl-PADM was visualized by scanning electron microscopy. Ventral hernia defects (2×4 cm) were created and repaired with ASC-seeded (n=31) and control (n=32) ncl-PADM. Explants were harvested at 1, 2, and 4 weeks after surgery. Explant remodeling outcomes were evaluated using gross evaluation (bowel adhesions, surface area, and grade), histological analysis (hematoxylin and eosin and Masson's trichrome staining), immunohistochemical analysis (von Willebrand factor VIII), fluorescent microscopy, and mechanical strength measurement at the tissue-bioprosthetic mesh interface. Stem cell markers CD29, CD90, CD44, and P4HB were highly expressed in cultured ASCs, whereas endothelial and hematopoietic cell markers, such as CD31, CD90, and CD45 had low expression. Approximately 85% of seeded ASCs adhered to ncl-PADM within 2 h after seeding, which was further confirmed by scanning electron microcopy examination. Gross evaluation of the hernia repairs revealed weak omental adhesion in all groups. Ultimate tensile strength was not significantly different in control and treatment groups. Conversely, elastic modulus was significantly greater at 4 weeks postsurgery in the ASC-seeded group (p<0.001). Cellular infiltration was significantly higher in the ASC-seeded group at all time points (p<0.05). Vascular infiltration was significantly greater at 4 weeks postsurgery in the ASC-seeded group (p<0.001). The presence of ASCs improved remodeling outcomes by yielding an increase in cellular infiltration and vascularization of ncl-PADM and enhanced the elastic modulus at the ncl-PADM-tissue interface. With the ease of harvesting adipose tissues that are rich in ASCs, this strategy may be clinically translatable for improving ncl-PADM ventral hernia repair outcomes.

Surgical approach to abdominal wall defects: history and new trends

We briefly outline the history of hernia surgery development from the Ebers Papyrus to modern prosthetic repairs. The rapid evolution of anatomical, physiological and pathogenetic concepts has involved the rapid evolution of surgical treatments. From hernia sack cauterization to sack ligation, posterior wall repair (Bassini), and prosthetic reinforcement there has been an evident improvement in surgical treatment results that has stimulated surgeons to find new technical solutions over time. The introduction of prosthetic repair, the laparoscopic revolution, the impact of local anesthesia and the diffusion of day surgery have been the main advances of the last 50 years. Searching for new gold standards, the introduction of new devices has also led to new complications and problems. Research of the last 10 years has been directed to overcome prosthetic repair complications, introducing every year new meshes and materials. Lightweight meshes, composite meshes and biologic meshes are novelties of the last few years. We also take a look at future trends.

Comparison of decellularization protocols for preparing a decellularized porcine annulus fibrosus scaffold

Tissue-specific extracellular matrix plays an important role in promoting tissue regeneration and repair. We hypothesized that decellularized annular fibrosus matrix may be an appropriate scaffold for annular fibrosus tissue engineering. We aimed to determine the optimal decellularization method suitable for annular fibrosus. Annular fibrosus tissue was treated with 3 different protocols with Triton X-100, sodium dodecyl sulfate (SDS) and trypsin. After the decellularization process, we examined cell removal and preservation of the matrix components, microstructure and mechanical function with the treatments to determine which method is more efficient. All 3 protocols achieved decellularization; however, SDS or trypsin disturbed the structure of the annular fibrosus. All protocols maintained collagen content, but glycosaminoglycan content was lost to different degrees, with the highest content with TritonX-100 treatment. Furthermore, SDS decreased the tensile mechanical property of annular fibrosus as compared with the other 2 protocols. MTT assay revealed that the decellularized annular fibrosus was not cytotoxic. Annular fibrosus cells seeded into the scaffold showed good viability. The Triton X-100–treated annular fibrosus retained major extracellular matrix components after thorough cell removal and preserved the concentric lamellar structure and tensile mechanical properties. As well, it possessed favorable biocompatibility, so it may be a suitable candidate as a scaffold for annular fibrosus tissue engineering.

Superparamagnetic iron oxide nanoparticles as MRI contrast agents for non-invasive stem cell labeling and tracking

Stem cells hold great promise for the treatment of multiple human diseases and disorders. Tracking and monitoring of stem cells in vivo after transplantation can supply important information for determining the efficacy of stem cell therapy. Magnetic resonance imaging (MRI) combined with contrast agents is believed to be the most effective and safest non-invasive technique for stem cell tracking in living bodies. Commercial superparamagnetic iron oxide nanoparticles (SPIONs) in the aid of transfection agents (TAs) have been applied to labeling stem cells. However, owing to the potential toxicity of TAs, more attentions have been paid to develop novel SPIONs with specific surface coating or functional moieties which facilitate effective cell internalization in the absence of TAs. This review aims to summarize the recent progress in the design and preparation of SPIONs as cellular MRI probes, to discuss their applications and current problems facing in stem cell labeling and tracking, and to offer perspectives and solutions for the future development of SPIONs in this field.