Functional and Edible Uses of Soy Protein Products

Study on gastric digestion behavior of phytase-treated soybean protein: A semi-dynamic digestion method

The digestive characteristics of plant proteins are crucial for their nutritional value and utilization efficiency. In this study, an in vitro semi-dynamic digestion model was employed to investigate the gastric digestion process of soybean protein after treatment with phytase. The results found that phytase treatment reduced the phytate content in soybean proteins (22.83 ± 0.09 to 8.72 ± 0.07 mg/g), shifted its isoelectric point towards the alkaline range by 1 pH unit, and significantly improved its solubility at pH 4.0. Particularly for protein sample treated with phytase after acid precipitation, the formation of aggregates during digestion was weakened, resulting in a significantly higher digestion rate compared to untreated SPI, with digestion being at least 15 min faster than SPI. This study provides a strategy for preparing soybean protein with faster digestion and weaker clot-forming ability during digestion, which offers insights for the application of soybean protein in clinical nutrition products and specialized medical foods.

Effects of immersion with electro-activated alkaline water on gel properties, biochemicals and odor characteristics of myofibrillar proteins

This study aimed to investigate the effects of alkaline water electrolysis (AWE) - assisted washing on gelling properties, microstructure, protein conformation, and flavor composition of golden pompano surimi. The experimental results showed that rinsing yield, water holding capacity (WHC), gel strength, and textural properties were effectively improved with AWE for 1 and 3 min. The rheological properties indicated a highly elastic gel with a dense and compact microstructure after soaking in AWE for 1 and 3 min, indicating that short-term alkaline immersion enhances cross-linking between myofibrillar proteins. Additionally, increasing the electrolysis time from 0 to 3 min effectively retained immobilized water due to increased aggregation of neighboring proteins, leading to a higher proportion of α-helix structures. Furthermore, AWE treatment for 3 min markedly reduced undesirable volatile compounds, including 1-butanol, hexanal, and 1-octen-3-ol, enhancing the hardness, chewiness, gumminess, and WHC of surimi. In conclusion, AWE-assisted washing emerges as an effective and reliable approach for upgrading the quality of surimi gel.

Evaluating the synergistic effects of sesame cake powder and soy protein isolate on rheological, textural, nutritional, and phenolic profiles of high-moisture extrusion processed meat analogs

In this study, the high-moisture meat analogs (HmMAs) were developed by incorporating defatted sesame cake powder (DSP) in soy protein isolate (SyPI). The quality attributes of HmMA like visual appearance, specific mechanical energy (SME), mass flow rate (MFR), phenolic profile, textural and rheological properties were assessed after varying DSP concentrations (0%, 20%, 40%, and 60% w/w) and feed moisture (FM) levels (55% and 60%). The HmMA1 (derived solely from SyPI) exhibited higher hardness, chewiness, gumminess, cohesiveness, and springiness. The HmMA prepared from SyPI-DSP blends (HmMA2-8) demonstrated significant improvements in nutritional composition, and their visual characteristics indicated noticeable anisotropy. The interaction between SyPI and DSP influenced the quality of HmMA. The higher DSP concentration led to higher MFR and deeper curvatures of U-shaped structures, whereas lower SMS, textural and rheological properties. The DSP incorporation and 55% FM adjustments allowed mimicking meat cuts with thick fiber, influenced color, and proved advantageous in developing white meat analogs with higher free phenolics. The findings of the study suggest avenues for exploring DSP at a suitable level in SyPI for the development of better quality meat analogs.

Transcriptome profiling uncovers differentially expressed genes linked to nutritional quality in vegetable soybean

Vegetative soybean (maodou or edamame) serves as a nutrient-rich food source with significant potential for mitigating global nutritional deficiencies. This study undertook a thorough examination of the nutritional profiles and transcriptomic landscapes of six soybean cultivars, including three common cultivars (Heinong551, Heinong562, and Heinong63) and three fresh maodou cultivars (Heinong527, HeinongXS4, and HeinongXS5). Nutrient analysis of the seeds disclosed notable differences in the levels of protein, fat, soluble sugars, vitamin E, calcium, potassium, magnesium, manganese, iron, and zinc across the cultivars. Through comparative transcriptome profiling and RNA sequencing, distinct variations in differentially expressed genes (DEGs) were identified between fresh and traditional maodou cultivars. Functional enrichment analyses underscored the involvement of DEGs in critical biological processes, such as nutrient biosynthesis, seed development, and stress responses. Additionally, association studies demonstrated robust correlations between specific DEG expression patterns and seed nutrient compositions across the different cultivars. Sankey diagrams illustrated that DEGs are strongly linked with seed quality traits, revealing potential molecular determinants that govern variations in nutritional content. The identified DEGs and their relationships with nutritional profiles offer valuable insights for breeding programs focused on developing cultivars with improved nutritional quality, tailored to specific dietary needs or industrial applications.

The potential of glycinin basic peptide derived from soybean as a promising candidate for the natural food additive and preservative: A review

Glycinin basic peptide (GBP) is the basic polypeptide of soybean glycinin that is isolated using cheap and readily available raw materials (soybean meals). GBP can bear high-temperature processing and has good functional properties, such as emulsification and adhesion properties et al. GBP exhibits broad-spectrum antimicrobial activities against Gram-positive and Gram-negative bacteria as well as fungi. Beyond that, GBP shows enormous application potential to improve the quality and extend the shelf life of food products. This review will systematically provide information on the purification, physicochemical and functional properties of GBP. Moreover, the antimicrobial activities and multi-target antimicrobial mechanism of GBP as well as the applications of GBP in different food products are also reviewed and discussed in detail. This review aims to offer valuable insights for the applications of GBP in the food industry as a promising natural food additive and preservative.

Advances in Soybean Genetic Improvement

The soybean (Glycine max) is a globally important crop due to its high protein and oil content, which serves as a key resource for human and animal nutrition, as well as bioenergy production. This review assesses recent advancements in soybean genetic improvement by conducting an extensive literature analysis focusing on enhancing resistance to biotic and abiotic stresses, improving nutritional profiles, and optimizing yield. We also describe the progress in breeding techniques, including traditional approaches, marker-assisted selection, and biotechnological innovations such as genetic engineering and genome editing. The development of transgenic soybean cultivars through Agrobacterium-mediated transformation and biolistic methods aims to introduce traits such as herbicide resistance, pest tolerance, and improved oil composition. However, challenges remain, particularly with respect to genotype recalcitrance to transformation, plant regeneration, and regulatory hurdles. In addition, we examined how wild soybean germplasm and polyploidy contribute to expanding genetic diversity as well as the influence of epigenetic processes and microbiome on stress tolerance. These genetic innovations are crucial for addressing the increasing global demand for soybeans, while mitigating the effects of climate change and environmental stressors. The integration of molecular breeding strategies with sustainable agricultural practices offers a pathway for developing more resilient and productive soybean varieties, thereby contributing to global food security and agricultural sustainability.

GastronOmics: Edibility and safety of mycelium of the oyster mushroom Pleurotus ostreatus

Food production is one of the most environmentally damaging human activities. In the face of climate change, it is essential to rethink our dietary habits and explore potential alternative foods catering both towards human and planetary needs. Fungal mycelium might be an attractive alternative protein source due to its rapid growth on sustainable substrates as well as promising nutritional and organoleptic properties. The natural biodiversity of filamentous fungi is vast and represents an untapped reservoir for food innovation. However, fungi are known to produce bioactive compounds that may affect human health, both positively and negatively. To narrow the search for safe and culinarily attractive fungal species, mycelia of edible fruiting-body forming fungi provide a promising starting point. Here, we explore whether the culinary attractiveness and safety of the commonly eaten mushroom, Pleurotus ostreatus, can also be translated to its mycelium. Whole-genome sequencing and pan-genome analysis revealed a high degree of genetic variability within the genus Pleurotus, suggesting that gastronomic traits as well as food safety may differ between strains. A representative strain, P. ostreatus M2191, was further analyzed for the food safety, nutritional properties and culinary applicability of its mycelium. No regulated mycotoxins were detected in either the fruiting body nor the mycelium. Yet, P. ostreatus is known to produce four peptide toxins, Ostreatin, Ostreolysin and Pleurotoysin A/B. These were found to be lower in the mycelium compared to fruiting bodies, which are already considered safe for consumption. Instead, a number of secondary metabolites with potential health benefits were detected in the fungal mycelium. In silico analysis of the proteome suggested low allergenicity. In addition, the fruiting body and the mycelium showed similar nutritional value, which was dependent on the growth substrate. To highlight the culinary potential of mycelium, we created a dish served at the two-star restaurant the Alchemist in Copenhagen, Denmark. Sensory analysis of the mycelium dish by an untrained consumer panel indicated consumer liking and openness to fungal mycelia. Based on sustainability, safety, culinary potential, and consumer acceptance, our findings suggest that P. ostreatus mycelium has great potential for use as a novel food source.

The Effect of High Hydrostatic Pressure (HHP) Induction Parameters on the Formation and Properties of Inulin-Soy Protein Hydrogels

The aim of this study was to determine the effect of high hydrostatic pressure (HHP) induction parameters on the formation and properties of inulin-soy protein hydrogels. Solutions containing 20 g/100 g of inulin and 3 or 6 g/100 g of soy protein isolate (3 SPI; 6 SPI) were subjected to HHPs of 150, 300, or 500 MPa for 5, 10, or 20 min. The HHP parameters had no significant impact on the effectiveness of hydrogel formation. In most cases, the time of solution pressurization had no significant effect on the characteristics of hydrogels. However, increasing the induction pressure from 150 to 300 MPa resulted in hydrogels with different characteristics being obtained, e.g., more flattened microstructure; higher stability (only 3 SPI); higher yield stress, firmness, and adhesiveness; and lower spreadability. These changes were more noticeable in the hydrogels with lower protein content. An increase in the induction pressure (to 500 MPa) did not result in a significant strengthening of the hydrogel structure. However, in the case of 6 SPI hydrogels, induction with a pressure of 500 MPa had an unfavorable effect on their stability. The results indicate that HHP (300 MPa) can be used as an effective method for strengthening the structure of inulin-protein hydrogels.

Characterization of Plant-Based Meat Treated with Hot Air and Microwave Heating

Plant-based meat is growing globally due to health, environmental, and animal welfare concerns, though there is a need for quality improvements. This study assessed how different ratios of wheat gluten (WG) to soy protein isolate (SPI) and various baking methods-hot air (HA), microwave (MW), and a combination of both (HA-MW)-affect the physicochemical properties of plant-based meat. Increasing the SPI from 0% to 40% significantly enhanced lightness, hardness, chewiness, water-holding capacity, moisture content, and lysine (an essential amino acid) (p ≤ 0.05). Hardness and chewiness ranged from 4.23 ± 1.19 N to 25.90 ± 2.90 N and 3.44 ± 0.94 N to 18.71 ± 1.85 N, respectively. Baking methods did not affect amino acid profiles. Compared to HA baking, MW and HA-MW baking increased lysine content (561.58-1132.50 mg/100 g and 544.85-1088.50 mg/100 g, respectively) while reducing fat and carbohydrates. These findings suggest that a 40% SPI and 60% WG ratio with microwave baking (360 W for 1 min) optimizes plant-based meat, offering benefits to both consumers and the food industry in terms of health and sustainability.

Recent Developments in the Application of Filamentous Fungus Aspergillus oryzae in Ruminant Feed

The resource-intensive nature of the ruminant farming sector, which has been exacerbated by population growth and increasing pressure to reduce feed antibiotics and growth promoters, has sparked interest in looking for sustainable alternative feed sources to enhance ruminant production efficiency. Edible filamentous fungi, rich in macronutrients like proteins, offer promise in reducing the reliance on conventional protein sources and antimicrobials to improve feed quality and animal performance. The inclusion of single-cell proteins, particularly filamentous fungi, in ruminant feed has long been of scientific and industrial interest. This review focuses on the potential application of the extensively studied Aspergillus oryzae and its fermentation extracts in ruminant nutrition. It provides an overview of conventional ruminant feed ingredients, supplements, and efficiency. Additionally, this review analyzes the re-utilization of organic residues for A. oryzae cultivation and examines the effects of adding fungal extracts to ruminant feed on ruminal digestibility and animal performance, all within a circular bioeconomy framework.

Tri-component hydrocolloid as egg white replacement in meringues: gellan gum with soy protein isolate and maltodextrin

BACKGROUND

In the quest for sustainable food ingredients, the present study delves into the potential of a tri-component hydrocolloid blend, comprising gellan gum (GG), soy protein isolate (SPI) and maltodextrin (MD), as a replacement for egg white in meringue production. The research aims to elucidate the intricate physical properties of meringue containing this tri-component structure, focusing on foaming dynamics, rheological behavior and the textural properties of the resulting meringue cookies.

RESULTS

Experiments were conducted with various hydrocolloids (k-carrageenan, GG, and locust bean gum) and GG was identified as optimal for improving foaming capacity and foaming stability. Rheological evaluations showed a positive correlation between increased GG concentration within the tri-component matrix and an increase in both storage modulus (G') and loss modulus (G"), indicating improved structural integrity. Furthermore, a comparative analysis of the texture profiles of cookies prepared with this blend highlighted the ability of higher GG concentrations to satisfactorily replicate the tactile and visual qualities of traditional egg white-based meringues. This result was particularly evident compared to formulations utilizing solely SPI or the combined SPI-MD configuration.

CONCLUSION

Conclusively, the results of the present study highlight the significant potential of the GG-SPI-MD tri-component structure to closely mimic the critical properties of egg white, thus offering a promising plant-based alternative for meringue production. © 2024 Society of Chemical Industry.

Determination of pesticide residues in soybeans using QuEChERS followed by deep eutectic solvent-based DLLME preconcentration prior to gas chromatography-mass spectrometry analysis

A reliable and greener alternative to the usual extraction methods is reported for the determination of pesticide residues in soybeans. This novel approach combines the classical QuEChERS extraction method with a DLLME (dispersive liquid-liquid microextraction) step, utilizing a deep eutectic solvent (DES) - camphor: hexanoic acid (1:1 molar ratio) - as the microextraction solvent. This DES has never been employed in pesticide analysis by gas chromatography-mass spectrometry of complex matrices like soybeans. A Plackett-Burman screening design was employed to optimize sample preparation variables of QuEChERS (amount of sodium chloride and magnesium sulfate, and amount of PSA and C18 sorbents) and DLLME (pH of medium, amount of sodium chloride, and volume of microextraction solvent). This design allowed for a systematic evaluation of the impact of each parameter on the method's performance. The optimized method was evaluated using a certified reference material and commercial samples of soybeans. The method exhibited high accuracy and precision for most of the analytes under study, demonstrating its applicability for pesticide residue analysis in soybeans. To assess the greenness and practicality of the developed method, the Analytical Greenness (AGREE) and Blue Applicability Grade Index (BAGI) metric systems were employed, respectively. Overall, the proposed QuEChERS-DLLME method using a DES solvent is a reliable and greener alternative to conventional extraction methods for the determination of pesticide residues in soybeans. Its high performance, coupled with its environmental friendliness, makes it a promising tool for food safety analysis.

In Situ Nanoencapsulation of Curcumin in Soy Protein Isolate Amyloid-like Aggregates for Enhanced Wound Healing

The importance of amyloid nanofibrils made from food proteins is rising in diverse fields, such as biomedicine and food science. These protein nanofibrils (PNFs) serve as versatile and sustainable building blocks for biomaterials, characterized by their high β-sheet content and an ordered hydrogen bond network. These properties offer both stability and flexibility, along with an extreme aspect ratio and reactive functional groups. Plant-derived amyloid nanofibrils, such as soy protein isolate (SPI) PNFs, are increasingly favored due to their affordability and sustainability compared with animal proteins. This study aimed to explore the formation and application of SPI amyloid-like aggregates (SPIA) and their nanoencapsulation of curcumin (Cur) for biomedical purposes, particularly in wound healing. Under specific conditions of low pH and high temperature, SPIA formed, exhibited an amyloid nature, and successfully encapsulated Cur, thereby enhancing its stability and availability. Spectroscopic and microscopic analyses confirmed structural changes in SPIA upon the incorporation of Cur and the fabrication of SPIA@Cur. The obtained results indicate that in the presence of Cur, SPIA forms faster, attributed to accelerated SPI denaturation, an increased nucleation rate, and enhanced self-assembly facilitated by Cur's hydrophobic interactions and π-π stacking with SPI peptides. In vitro studies demonstrated the biocompatibility, biodegradability, and antioxidant properties of SPIA@Cur along with controlled release behavior. In vivo experiments in male Wistar rats revealed that both SPIA and SPIA@Cur significantly accelerate wound closure compared with untreated wounds, with SPIA@Cur showing slightly better efficacy. The histological analysis supported enhanced wound healing, indicating the potential of SPIA@Cur for biomedical applications.

Hemp (Cannabis sativa L.) protein: Impact of extraction method and cultivar on structure, function, and nutritional quality

Hemp (Cannabis sativa L.) is increasingly gaining traction as a novel and sustainable source of plant protein. Accordingly, the aim of this study was to investigate the effectiveness of two protein extraction methods, alkaline extraction coupled with isoelectric precipitation (AE-IEP) and salt extraction coupled with ultrafiltration (SE-UF) in producing hemp protein isolates (pH-HPI and salt-HPI) with high purity and yield. Structural characterization as impacted by extraction method and cultivar was performed and related to functional performance and nutritional quality. Both extraction methods, with carefully selected parameters, resulted in HPI with high purity (86.6-88.1% protein) and protein extraction yields (81.6-87.3%). All HPI samples had poor solubility (∼9-20%) at neutral pH compared to commercial soy protein and pea protein isolates (cSPI, cPPI). A relatively high surface hydrophobicity and low surface charge contributed to such poor solubility of HPI. However, HPI demonstrated similar solubility at acidic pH (50-67%) and comparable gel strength (up to 24 N) to cSPI. Comparing experimental amino acid composition to the theoretical amino acid distribution in hemp protein provided insights to the functional performance of the protein isolates. While pH-HPI demonstrated better functionality than salt-HPI, minimal structural, functional, and nutritional differences were noted among the pH-HPI samples extracted from four different cultivars. Overall, results from this work could be used to guide future attempts to further develop successful protein extraction processes, and to provide valuable insights to propel breeding efforts that target enhanced hemp protein characteristics for food applications.

Biodegradable Solid Polymer Electrolytes from the Discarded Cataractous Eye Protein Isolate

The protein extracted from the discarded eye lenses postcataract surgery, referred to as the cataractous eye protein isolate (CEPI), is employed as a polymer matrix for the construction of solid polymer electrolyte species (SPEs). SPEs are expected to be inexpensive, conductive, and mechanically stable in order to be economically and commercially viable. Environmentally, these materials should be biodegradable and nontoxic. Taking these factors into account, we investigated the possibility of using a discarded protein as a polymer matrix for SPEs. Natural compounds sorbitol and sinapic acid (SA) are used as the plasticizer and cross-linker, respectively, to tune the mechanical as well as electrochemical properties. The specific material formed is demonstrated to have high ionic conductivity ranging from ∼2 × 10-2 to ∼8 × 10-2 S cm-1. Without the addition of any salt, the ionic conductivity of sorbitol-plasticized non-cross-linked CEPI is ∼7.5 × 10-2 S cm-1. Upon the addition of NaCl, the conductivity is enhanced to ∼8 × 10-1 S cm-1. This study shows the possibility of utilizing a discarded protein CEPI as an alternative polymer matrix with further potential for the construction of tunable, flexible, recyclable, biocompatible, and biodegradable SPEs for flexible green electronics and biological devices.

Perovskite Nanocrystals: Superior Luminogens for Food Quality Detection Analysis

With the global limited food resources receiving grievous damage from frequent climate changes and ascending global food demand resulting from increasing population growth, perovskite nanocrystals with distinctive photoelectric properties have emerged as attractive and prospective luminogens for the exploitation of rapid, easy operation, low cost, highly accurate, excellently sensitive, and good selective biosensors to detect foodborne hazards in food practices. Perovskite nanocrystals have demonstrated supreme advantages in luminescent biosensing for food products due to their high photoluminescence (PL) quantum yield, narrow full width at half-maximum PL, tunable PL in the entire visible spectrum, easy preparation, and various modification strategies compared with conventional semiconductors. Herein, we have carried out a comprehensive discussion concerning perovskite nanocrystals as luminogens in the application of high-performance biosensing of foodborne hazards for food products, including a brief introduction of perovskite nanocrystals, perovskite nanocrystal-based biosensors, and their application in different categories of food products. Finally, the challenges and opportunities faced by perovskite nanocrystals as superior luminogens were proposed to promote their practicality in the future food supply.

Storage stability and shelf-life of soymilk obtained via repeated boiling and filtering: A predictive model

This study investigated the effects of different processing methods on the quality and nutrition of soymilk, as well as the changes in storage stability (centrifugal sedimentation rate (CSR), viscosity, and particle size) and shelf-life of soymilk at different storage temperatures (25°C, 35°C, 45°C, and 55°C). Results showed that soymilk processed via the repeated boiling-to-filtering method (RBFM) exhibited the highest protein content (3.89 g/100 g), carbohydrate content (1.27 g/100 g), and stability coefficient (0.950). The CSR and particle size of RBFM soymilk increased gradually during storage at different temperatures, while the viscosity and sensory score decreased. The correlation between the CSR and the sensory score of RBFM soymilk was the highest (R 2 = .9868). The CSR was selected as the key indicator to predict the shelf-life of RBFM soymilk. The average residual variation in RBFM soymilk shelf-life based on the predictive model was 10.78%, indicating the strong accuracy of the model for predicting the shelf-life of RBFM soymilk stored at temperatures ranging from 25-45°C. This study provides a theoretical basis and technological support for the development, transportation, and storage of soymilk and soymilk beverage products.

Towards superior biopolymer gels by enabling interpenetrating network structures: A review on types, applications, and gelation strategies

Gels derived from single networks of natural polymers (biopolymers) typically exhibit limited physical properties and thus have seen constrained applications in areas like food and medicine. In contrast, gels founded on a synergy of multiple biopolymers, specifically polysaccharides and proteins, with intricate interpenetrating polymer network (IPN) structures, represent a promising avenue for the creation of novel gel materials with significantly enhanced properties and combined advantages. This review begins with the scrutiny of newly devised IPN gels formed through a medley of polysaccharides and/or proteins, alongside an introduction of their practical applications in the realm of food, medicine, and environmentally friendly solutions. Finally, based on the fact that the IPN gelation process and mechanism are driven by different inducing factors entwined with a diverse amalgamation of polysaccharides and proteins, our survey underscores the potency of physical, chemical, and enzymatic triggers in orchestrating the construction of crosslinked networks within these biomacromolecules. In these mixed systems, each specific inducer aligns with distinct polysaccharides and proteins, culminating in the generation of semi-IPN or fully-IPN gels through the intricate interpenetration between single networks and polymer chains or between two networks, respectively. The resultant IPN gels stand as paragons of excellence, characterized by their homogeneity, dense network structures, superior textural properties (e.g., hardness, elasticity, adhesion, cohesion, and chewability), outstanding water-holding capacity, and heightened thermal stability, along with guaranteed biosafety (e.g., nontoxicity and biocompatibility) and biodegradability. Therefore, a judicious selection of polymer combinations allows for the development of IPN gels with customized functional properties, adept at meeting precise application requirements.

Effect of Protein Surface Hydrophobicity and Surface Amines on Soy Adhesive Strength

Soy is considered one of the most promising natural materials for manufacturing wood adhesives due to its low cost, high protein content, and ready availability. However, more cost-effective ways of improving its wet shear strength are needed to achieve wider market acceptance. Protein adhesive wet strength depends on the use of (typically expensive) crosslinking additives as well as the processing/denaturation of the protein. It has been commonly stated in the literature that protein denaturation leads to higher bond strength by activating the surface and exposing the reactive groups. Therefore, we investigated how differences in surface reactive groups (surface hydrophobicity and reactive amine groups) brought on with different denaturation treatments relate to bonding performance. Fourteen soy protein isolates (SPIs) with different denaturation histories were investigated. Characterization of the SPIs included surface hydrophobicity, surface amine content, extent of protein hydrolysis, and bond strength (wet and dry, with and without polyamidoamine epichlorohydrin (PAE) crosslinking agent) by ASTM D7998. The molecular weight patterns showed that proteins denatured by extensive hydrolysis had very low bond strengths. Adding the crosslinker, PAE, improved all the shear strength values. We found that the number of water-accessible reactive amine groups on protein surfaces had no impact on the adhesive strength, even with the amine-reactive crosslinker, PAE. Conversely, increased surface hydrophobicity was beneficial to adhesive strength in all cases, though this correlation was only statistically significant for wet strength without PAE. While, in general, denatured proteins are typically thought to form better bonds than native state proteins, this work suggests that it matters how proteins are denatured, and what surfaces become exposed. Denaturation by hydrolysis did not improve bond strength, and extensive hydrolysis seemed highly detrimental. Moreover, exposing hydrophobic surface groups was beneficial, but exposing covalent bond-forming reactive amine groups was not.

Consumer Acceptance of Texture-Modified Mackerel Stew Products in Older Adults

Along with concerns regarding societal aging, the dietary requirements of older adults have become a priority. Older adults in Korea experience difficulties consuming animal protein sources as they age. Therefore, this study aimed to develop a senior-friendly food product using mackerel. Accordingly, carbohydrates and proteins were added to the brine solution before saturated vapor treatment. Calcium lactate and poly-gamma-glutamic acid were added to the sauce, and when compared to four commercial products (GT_R, GT_K, PC_K, and AC_G) in an acceptance test, the product was found to exhibit the highest overall liking score (p < 0.001). Higher flavor-liking and familiarity ratings were found to increase purchase intention, while higher flavor-liking, overall-liking, and familiarity ratings increased recommendation intention. Those in mid-to-late adulthood preferred the GT_R and PC_K samples, whereas the AC_G sample was preferred by those in very late adulthood. AC_G sample analysis suggested that those in the very late adulthood group had a relatively higher acceptance of spiciness. In this study, a calcium-added mackerel stew product was manufactured, meeting the standards for senior-friendly food in Korea. It will serve as a baseline for further research on fish- and mackerel-based foods for older adults, which is in its early stages.

Tomographical, rheological, and structural effects of soy protein concentrate in a gluten-free extruded noodle system

Global interest in high-protein foods has been rapidly increasing and the gluten-free products are no exceptions. Gluten-free extruded noodles made from rice flour were thus fortified with soy protein concentrate (SPC) (0%, 15%, 30%, and 45% by weight), and the physicochemical properties of the noodles were characterized in terms of tomographical, rheological, and structural features. SPC-rice flour blends showed higher water absorption and swelling power at room temperature with increasing levels of SPC, which were reduced upon heating. The flour blends with high-levels of SPC also had lower pasting viscosities. Thermal analysis showed lower enthalpy values and higher temperatures derived from starch gelatinization. When the SPC-rice flour blends were applied to extruded gluten-free rice noodles, the noodles tomographically showed a dense and compact structure, that could be favorably correlated with their textural changes (increased hardness and reduced extensibility). FTIR analysis presented the structural changes of the noodles containing different levels of SPC by showing higher intensity of protein-related absorption peaks and lower starch peak intensity, which could be associated with the reduced cooking loss. Moreover, there existed two water components with different mobilities in the noodles whose spin-spin relaxation times had a tendency to increase with increasing SPC content. The results obtained from this study provided fundamental insights into the processing performance of protein-rich ingredients in gluten-free extruded noodles, probably promoting the development of a wider variety of protein-fortified gluten-free products.

Effects of monoacylglycerols with different saturation degrees on physical and whipping properties of milk fat-based whipping creams

Milk fat-based whipping cream is primarily comprised of cream and whole milk. It has melt-in-the-mouth texture and unique milk flavor. However, milk fat-based whipping cream suffers from poor emulsion stability and foam firmness. The effects of monoacylglycerols (MAGs) with different saturation degrees (M1: 98% saturation, M2: 70% saturation and M3: 30% saturation) on emulsion properties (average particle size, viscosity, and emulsion stability) and whipping properties (overrun, firmness, shape retention ability, and foam stability) of milk fat-based whipping creams were investigated in this study. MAGs significantly decreased particle sizes (from 2.84 to 1.16 μm) and enhanced viscosity (from 350 to 490 cP) of the milk fat-based emulsions (emulsion without MAGs: M0, 5.01 μm, 298 cP) (P < 0.05). MAGs increased the stability of the milk fat-based emulsions with lesser phase separation during centrifugation tests and lower changes in particle sizes and viscosities during temperature cycling tests. Emulsion M1 with highest degree of saturation is less likely to destabilize and phase inverse. The decrease sharply in conductivity can be attributed to the entrapment of large amounts of air. Following that, the conductivity of M1 with low variation indicating high whipping resistance and less likely to coalescence and phase separation. Adding MAGs can significantly enhance overrun (M1: 205.3%, M2: 198.5%, M3: 141.4%) as compared to the control sample (M0: 97.9%) (P < 0.05). In emulsions containing MAGs with high degree of saturation (M1 and M2), firmness (M1: 95 g, M2: 109 g) and shape retention ability of the whipped creams were reduced as compared to control emulsion without MAG (M0: 173 g), but the foam stability (M1: 89%, M2: 91%) was enhanced (M0: 81%); M3 (firmness: 507 g; foam stability: 66%) has the contrasted effects. Whipping cream M2 demonstrated the best whipping properties with high overrun (198.46%), good firmness (109 g), shape retention ability and foam stability (91%). Good quality whipping creams can be obtained by selecting suitable MAGs.

Physiochemical characteristics and sensory properties of plant protein isolates-konjac glucomannan compound gels

In this study, the effects of konjac glucomannan (KGM) at different concentrations on the physiochemical and sensory properties of soy protein isolate (SPI), pea protein isolate (PPI), or peanut protein isolate (PNPI) compound gels were investigated. The results revealed that when the ratio of PNPI to KGM was 90:10, the denaturation temperature of PNPI could be significantly enhanced to 119.32°C by KGM modification. Concerning the textural and microstructural features, the amount of KGM addition had positive correlation with the hardness and chewiness of each compound gel, however, too much KGM addition will cause the unstable internal structure of the PNPI/KGM compound gels (70:30 and 60:40). Furthermore, sensory results indicated that PNPI/KGM (80:20), PPI/KGM (80:20), SPI/KGM (80:20) had great potential to be considered as prototypes for novel plant-based products, which generated the highest acceptance scores of 5.04, 5.94, and 5.36 in each group, respectively.

Significance of Fermentation in Plant-Based Meat Analogs: A Critical Review of Nutrition, and Safety-Related Aspects

Plant-based meat analogs have been shown to cause less harm for both human health and the environment compared to real meat, especially processed meat. However, the intense pressure to enhance the sensory qualities of plant-based meat alternatives has caused their nutritional and safety aspects to be overlooked. This paper reviews our current understanding of the nutrition and safety behind plant-based meat alternatives, proposing fermentation as a potential way of overcoming limitations in these aspects. Plant protein blends, fortification, and preservatives have been the main methods for enhancing the nutritional content and stability of plant-based meat alternatives, but concerns that include safety, nutrient deficiencies, low digestibility, high allergenicity, and high costs have been raised in their use. Fermentation with microorganisms such as Bacillus subtilis, Lactiplantibacillus plantarum, Neurospora intermedia, and Rhizopus oryzae improves digestibility and reduces allergenicity and antinutritive factors more effectively. At the same time, microbial metabolites can boost the final product's safety, nutrition, and sensory quality, although some concerns regarding their toxicity remain. Designing a single starter culture or microbial consortium for plant-based meat alternatives can be a novel solution for advancing the health benefits of the final product while still fulfilling the demands of an expanding and sustainable economy.

Chayote (Sechium edule (Jacq.) Swartz) Seed as an Unexploited Protein Source: Bio-Functional and Nutritional Quality of Protein Isolates

Chayote seeds have good protein quality and recognized bioactive properties, being still unexplored as a nutraceutical. In this work, chayote seed protein isolates (CSPIs) were prepared by alkaline extraction (AE) and ultrasonic-assisted extraction (UAE) using a probe (20 kHz) or a water bath (40 kHz), and their physicochemical, functional properties and nutraceutical potential were investigated. For all treatments, protein solutions (10% w/v) were treated for 20 min. The UAE significantly (p < 0.05) improved the protein extraction yield and functional properties (protein solubility, turbidity, and emulsifying and foaming properties) of CSPIs. This effect was more pronounced using a probe sonication device. The CSPI obtained by UAE-20 kHz contained 8.2 ± 0.9% dw of proteins with a balanced amino acid profile, higher content of essential amino acids (315.63 mg/g of protein) and higher protein digestibility (80.3 ± 4.5%). Furthermore, CSPI.UAE-20 kHz exhibited the highest phenolic content (7.22 mg GAE/g dw), antioxidant capacity and α-amylase inhibition (74%, at 100 μg/mL concentration). Overall, these results suggest that ultrasound technology contributed greatly to the corresponding functional and nutritional properties of chayote seed proteins. It would be, therefore, useful to apply this Cucurbitaceae species in food systems, promoting its nutritional and commercial value.

Techno-Functional and Sensory Characterization of Commercial Plant Protein Powders

Many new plant proteins are appearing on the market, but their properties are insufficiently characterized. Hence, we collected 24 commercial proteins from pea, oat, fava bean, chickpea, mung bean, potato, canola, soy, and wheat, including different batches, and assessed their techno-functional and sensory properties. Many powders had yellow, red, and brown color tones, but that of fava bean was the lightest. The native pH ranged from 6.0 to 7.7. The water solubility index was 28% on average, but after heat treatment the solubility typically increased. Soy isolate had by far the best water-holding capacity of 6.3 g (H₂O) g^-1, and canola had the highest oil-holding capacity of 2.8 g (oil) g^-1. The foaming capacity and stability results were highly varied but typical to the raw material. The emulsification properties of all powders were similar. Upon heating, the highest viscosity and storage modulus were found in potato, canola, and mung bean. All powders had raw material flavor, were bitter and astringent, and undissolved particles were perceived in the mouth. Large differences in functionality were found between the batches of one pea powder. In conclusion, we emphasize the need for methodological standardization, but while respecting the conditions found in end applications like meat and dairy analogs.

A global perspective on a new paradigm shift in bio-based meat alternatives for healthy diet

A meat analogue is a casserole in which the primary ingredient is something other than meat. It goes by various other names, such as meat substitute, fake meat, alternative meat, and imitation meat. Consumers growing interest in improving their diets and the future of the planet have contributed to the move towards meat substitutes. This change is due to the growing popularity of low-fat and low-calorie diets, the rise of flexitarians, the spread of animal diseases, the loss of natural resources, and the need to cut down on carbon emissions, which lead to greenhouse effects. Plant-based meat, cultured meat, algal protein-based meat, and insect-based meat substitutes are available on the market with qualities like appearance and flavor similar to those of traditional meat. Novel ingredients like mycoprotein and soybean leg haemoglobin are mixed in with the more traditional soy proteins, cereals, green peas, etc. Plant-based meat is currently more popular in the West, but the growing interest in this product in Asian markets indicates the industry in this region will expand rapidly in the near future. Future growth in the food sector can be anticipated from technologies like lab-grown meat and its equivalents that do not require livestock breeding. Insect-based products also hold great potential as a new source of protein for human consumption. However, product safety and quality should be considered along with other factors such as marketability and affordability.

Trends and prospects in dairy protein replacement in yogurt and cheese

There is a growing demand for nutritional, functional, and eco-friendly dairy products, which has increased the need for research regarding alternative and sustainable protein sources. Plant-based, single-cell (SCP), and recombinant proteins are being explored as alternatives to dairy proteins. Plant-Based Proteins (PBPs) are commonly used to replace total dairy protein. However, PBPs are generally mixed with dairy proteins to improve their functional properties, which makes them dependent on animal protein sources. In contrast, single-Cell Proteins (SCPs) and recombinant dairy proteins are promising alternatives for dairy protein replacement since they provide nutritional components, essential amino acids, and high protein yield and can use industrial and agricultural waste as carbon sources. Although alternative protein sources offer numerous advantages over conventional dairy proteins, several technical and sensory challenges must be addressed to fully incorporate them into cheese and yogurt products. Future research can focus on improving the functional and sensory properties of alternative protein sources and developing new processing technologies to optimize their use in dairy products. This review highlights the current status of alternative dairy proteins in cheese and yogurt, their functional properties, and the challenges of their use in these products.

Addressing Clean Label Trends in Commercial Meat Processing: Strategies, Challenges and Insights from Consumer Perspectives

BACKGROUND

The concept of a clean label is difficult to define, even in common language, as the interpretation of what a "clean" food is differs from one person to another and from one organisation to another. The lack of a unique definition and regulations of what the term "clean" means, along with the growing consumer demand for more "natural" and healthier foods, is posing new challenges for manufacturers and ingredient producers. The meat industry, in particular, has been affected by this new movement owing to negative attitudes and feelings consumers associate with consuming processed meat products. Scope and approach: The review scope is to describe attributes and associations around the "clean" label term by analysing the most recent ingredients, additives and processing methods currently available for meat manufacturers. Their application in meat, plant-based alternatives and hybrid meat/plant products, current limitations and challenges presented in consumer perception, safety and potential impacts on product quality are also presented.

KEY FINDINGS AND CONCLUSIONS

The availability of a growing number of "clean" label ingredients provides a new suite of approaches that are available for application by meat processors to help overcome some of the negative connotations associated with processed meat products and also support plant-based meat alternatives and hybrids.

Sustainable soy protein microsponges for efficient removal of lead (II) from aqueous environments

Protein-based materials recently emerged as good candidates for water cleaning applications, due to the large availability of the constituent material, their biocompatibility and the ease of preparation. In this work, new adsorbent biomaterials were created from Soy Protein Isolate (SPI) in aqueous solution using a simple environmentally friendly procedure. Protein microsponge-like structures were produced and characterized by means of spectroscopy and fluorescence microscopy methods. The efficiency of these structures in removing lead (Pb²⁺) ions from aqueous solutions was evaluated by investigating the adsorption mechanisms. The molecular structure and, consequently, the physico-chemical properties of these aggregates can be readily tuned by selecting the pH of the solution during production. In particular, the presence of β-structures typical of amyloids as well as an environment characterized by a lower dielectric constant seem to enhance metal binding affinity revealing that hydrophobicity and water accessibility of the material are key features affecting the adsorption efficiency. Presented results provide new knowledge on how raw plant proteins can be valorised for the production of new biomaterials. This may offer extraordinary opportunities towards the design and production of new tailorable biosorbents which can also be exploited for several cycles of purification with minimal reduction in performance. SYNOPSIS: Innovative, sustainable plant-protein biomaterials with tunable properties are presented as green solution for water purification from lead (II) and the structure-function relationship is discussed.

Edible insect as an alternative protein source: a review on the chemistry and functionalities of proteins under different processing methods

The consumption of edible insects can be anadvantageous alternative to the conventional food supply chain, which involves global water waste, land deficit, undernutrition, and starvation. Besides the nutritional aspects, insect proteins have demonstrated a wide range of functional properties such as foamability, emulsifying and gelling abilities. The protein content and amino acid profile of some insects have revealed a good nutritional value and interesting functional properties. However, it is crucial to comprehend how the protein quality is affected by insect feeding, drying, and defatting. There is a knowledge gap about the impact of industrial treatment, such as pH, ionic strength, and heat treatment, on insect proteins' functional properties. In this review, we have aimed to highlight the potential application of insect proteins as a nutritional source and their promising technological applications. The study reported the principal insect protein characterization methodologies that have been investigated in the literature aiming to correlate the physicochemical parameters to possible protein functionalities. The research on the functional properties of insect proteins is at the exploratory level. Further detailed studies are needed to clarify the structure-function relation of insect proteins and how these functionalities and insect processing can increase consumer acceptance.

Turning Food Protein Waste into Sustainable Technologies

For each kilogram of food protein wasted, between 15 and 750 kg of CO2 end up in the atmosphere. With this alarming carbon footprint, food protein waste not only contributes to climate change but also significantly impacts other environmental boundaries, such as nitrogen and phosphorus cycles, global freshwater use, change in land composition, chemical pollution, and biodiversity loss. This contrasts sharply with both the high nutritional value of proteins, as well as their unique chemical and physical versatility, which enable their use in new materials and innovative technologies. In this review, we discuss how food protein waste can be efficiently valorized not only by reintroduction into the food chain supply but also as a template for the development of sustainable technologies by allowing it to exit the food-value chain, thus alleviating some of the most urgent global challenges. We showcase three technologies of immediate significance and environmental impact: biodegradable plastics, water purification, and renewable energy. We discuss, by carefully reviewing the current state of the art, how proteins extracted from food waste can be valorized into key players to facilitate these technologies. We furthermore support analysis of the extant literature by original life cycle assessment (LCA) examples run ad hoc on both plant and animal waste proteins in the context of the technologies considered, and against realistic benchmarks, to quantitatively demonstrate their efficacy and potential. We finally conclude the review with an outlook on how such a comprehensive management of food protein waste is anticipated to transform its carbon footprint from positive to negative and, more generally, have a favorable impact on several other important planetary boundaries.

A systematic study of the impact of the isoelectric precipitation process on the physical properties and protein composition of soy protein isolates

The functional properties of soy protein isolates (SPIs), which are crucial for their successful use in food applications, depend on their protein physical properties and composition. Although the production process of SPIs is well-known and established industrial practice, fundamental knowledge on how the different isolation steps and varying isolation conditions influence these properties is lacking. Here, these characteristics were systematically investigated by assessing the impacts of the various steps of a conventional isoelectric precipitation based SPI production protocol. Protein denaturation and colloidal state were evaluated with differential scanning calorimetry and dynamic light scattering combined with (ultra)centrifugation, respectively. The protein composition (on protein subunit level) was assessed via size-exclusion chromatography. Hexane defatting was found not to cause protein denaturation. Alkaline extraction at pH values between 7.0 and 9.0 resulted in no differences in protein physical properties or composition. Subsequent acid precipitation at pH 5.5 resulted in SPIs with a lower 7S/11S ratio and higher protein solubility at neutral pH than when produced at pH 4.5 and 3.5. SPIs obtained at all evaluated precipitation pH values contained a considerable amount of aggregated protein structures. Spray-drying of SPI did not result in a higher degree of protein denaturation or in a loss of protein solubility compared to freeze-drying, but a smaller amount of soluble aggregates was observed in spray-dried SPIs. Hence, alterations in the isolation procedure can result in SPIs with moderately different physical properties and protein composition, which might lead to different functional properties and thus applicabilities in certain food systems.

Effect of Fluidized Bed Agglomeration on Rheological and Physical Properties of Soy Protein-Enriched Milk Powder for Dietary Supplementation in Sarcopenia

Recently, many elderly people in Korea have been consuming protein-enriched milk powders for dietary supplementation in sarcopenia. In general, protein powders are manufactured using a spray dryer, and their fine particles result in poor instant properties. Fluidized bed agglomeration (FBA) is an effective method for improving the physical properties of protein powders via particle granulation, such as flowability and wettability. Therefore, the effects of FBA on the rheological and physical properties of isolated soy protein (ISP)-enriched skim milk powder (SMP) were investigated in this study. The size of ISP-enriched SMP particles was significantly increased by FBA, leading to changes in the Carr index and Hausner ratio from fair flowability and intermediate cohesiveness to good flowability and low cohesiveness, respectively. The wettability of the granulated particles was also improved by FBA, and they exhibited a shorter wetting time below 10 s. However, a slight color change was observed after the FBA process. These findings contribute to the production of protein-enriched food powders with improved properties.

Effect of the physical fibrillated sweet potato (Ipomoea batatas) stem on the plant-based patty analogues

In this study, a dietary fiber extracted from sweet potato stems (Ipomoea batatas, PS) was evaluated for its ability to improve the quality of vegetable patty analogues. A patty analogues containing 0-50 wt% dietary fiber were prepared to analyze the utilized dietary fiber's performance. To evaluate the manufactured patty analogues, texture profile analysis, color analysis, emulsion stability, and microstructural analysis were conducted. As the PS increased, the hardness decreased, while the total expressible fluids tended to increase. The color analysis revealed that the a* value, which represents red, declined as the PS content increased, and heterogeneous colors showed at least 40 wt% of PS. According to the microstructural analysis, PS is a structure in which massive fiber bundles are integrated between textured vegetable protein networks, which is believed to have given the patty analogue soft characteristics. The findings of this study can serve as a foundation for future research into the application of carbohydrates to plant-based meat analogues.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-022-01211-y.

Soybean genetic resources contributing to sustainable protein production

KEY MESSAGE

Genetic resources contributes to the sustainable protein production in soybean. Soybean is an important crop for food, oil, and forage and is the main source of edible vegetable oil and vegetable protein. It plays an important role in maintaining balanced dietary nutrients for human health. The soybean protein content is a quantitative trait mainly controlled by gene additive effects and is usually negatively correlated with agronomic traits such as the oil content and yield. The selection of soybean varieties with high protein content and high yield to secure sustainable protein production is one of the difficulties in soybean breeding. The abundant genetic variation of soybean germplasm resources is the basis for overcoming the obstacles in breeding for soybean varieties with high yield and high protein content. Soybean has been cultivated for more than 5000 years and has spread from China to other parts of the world. The rich genetic resources play an important role in promoting the sustainable production of soybean protein worldwide. In this paper, the origin and spread of soybean and the current status of soybean production are reviewed; the genetic characteristics of soybean protein and the distribution of resources are expounded based on phenotypes; the discovery of soybean seed protein-related genes as well as transcriptomic, metabolomic, and proteomic studies in soybean are elaborated; the creation and utilization of high-protein germplasm resources are introduced; and the prospect of high-protein soybean breeding is described.

Nutritional and Functional Properties of Defatted Flour, Protein Concentrates, and Isolates of Brachytrupes membranaceus (Orthoptera: Gryllidae) (Drury: 1773) and Macrotermes subhyalinus (Isoptera: Blattodea) (Rambur: 1842) from Burkina Faso

Brachytrupes membranaceus and Macrotermes subhyalinus are edible insects in Burkina Faso. Our research aimed to evaluate the nutritional composition and functional properties of the defatted flours, protein concentrates, and isolates of Brachytrupes membranaceus and Macrotermes subhyalinus. Proximate and mineral composition were determined according to AOAC methods. The amino acid and fatty acid composition were determined by high-performance liquid chromatography (HPLC) and gas chromatography, respectively. The protein concentrates and isolates were obtained by solubilization, precipitation, and lyophilization. Macrotermes subhyalinus showed the highest protein (45.75 g/100 g), iron (11.76 mg/100 g), and zinc (13.18 mg/100 g) contents. The highest isoleucine and lysine contents, the best fat absorption (10.87 g/g), and foaming capacities (49.60%) were obtained with the isolate of Brachytrupes membranaceus. Consumption of Macrotermes subhyalinus could be used to fight or correct iron and zinc deficiencies. Macrotermes subhyalinus was a source of macronutrients and micronutrients, while the protein concentrates and isolates of Brachytrupes membranaceus were endowed with functional properties (fat absorption and foaming capacities).

Exploring Soybean Flower and Pod Variation Patterns During Reproductive Period Based on Fusion Deep Learning

The soybean flower and the pod drop are important factors in soybean yield, and the use of computer vision techniques to obtain the phenotypes of flowers and pods in bulk, as well as in a quick and accurate manner, is a key aspect of the study of the soybean flower and pod drop rate (PDR). This paper compared a variety of deep learning algorithms for identifying and counting soybean flowers and pods, and found that the Faster R-CNN model had the best performance. Furthermore, the Faster R-CNN model was further improved and optimized based on the characteristics of soybean flowers and pods. The accuracy of the final model for identifying flowers and pods was increased to 94.36 and 91%, respectively. Afterward, a fusion model for soybean flower and pod recognition and counting was proposed based on the Faster R-CNN model, where the coefficient of determinationR2 between counts of soybean flowers and pods by the fusion model and manual counts reached 0.965 and 0.98, respectively. The above results show that the fusion model is a robust recognition and counting algorithm that can reduce labor intensity and improve efficiency. Its application will greatly facilitate the study of the variable patterns of soybean flowers and pods during the reproductive period. Finally, based on the fusion model, we explored the variable patterns of soybean flowers and pods during the reproductive period, the spatial distribution patterns of soybean flowers and pods, and soybean flower and pod drop patterns.

Origin and seed coat color differently affect the concentrations of metabolites and antioxidant activities in soybean (Glycine max (L.) Merrill) seeds

In this study, 54 soybean germplasms of different seed coat colors originated from America, China, Japan, and Korea were cultivated in Korea and analyzed for the contents of total oil, total protein, total phenolic, five fatty acids, and five isoflavones, and antioxidant activities using three assays. The soybeans showed significant variations (p < 0.05) of metabolite contents and antioxidant activities. Origin and seed coat color exhibited a slight or insignificant effect on total protein and total oil contents. In contrast, origin and seed coat color significantly affected the concentration of individual and total isoflavones, and total phenolics, with few exceptions. Whereas fatty acids were significantly affected by origin, seed coat color provided better information regarding the variations in antioxidant capacities. Together, multivariate and correlation analyses revealed important associations between biosynthetically-related metabolites. In general, origin and seed coat color differently influenced the concentration of different classes of metabolites and antioxidant activities.

Are Vegan Alternatives to Meat Products Healthy? A Study on Nutrients and Main Ingredients of Products Commercialized in Brazil

Proteins are essential components in human nutrition, and animal products are usually the primary sources of human ingestion. However, the number of adherents to vegetarian and vegan diets has grown significantly, highlighting the need for alternatives to replace animal proteins. Meat substitutes aim to mimic the nutritional value and sensory characteristics of meat. However, studies suggest differences in their composition. This study is the first to evaluate Brazilian meat substitutes' nutritional quality and ingredients. A quantitative cross-sectional survey was performed in three steps: (i) Sample mapping of products commercialized nationwide; (ii) Ingredients and nutritional data collection and classification; (iii) Statistical analysis. One hundred twenty-five meat substitutes were included and described. The primary protein sources were soy, gluten, and pea protein ingredients. Vegan meat substitutes presented similar energy and protein values, with few exceptions among samples, with vegan canned fish alternatives presenting less protein than their counterparts. Overall vegan products did not differ regarding sodium levels but showed high amounts to compose a lunch or dinner meal. Vegan meat substitutes showed higher carbohydrates, dietary fiber concentrations, and few differences regarding total and saturated fat. Vegan meat substitutes may contribute to the adherence and maintenance of vegan and vegetarian diets. However, future studies about the implemented ingredients are needed.

Functional, Antioxidant, and Anti-Inflammatory Properties of Cricket Protein Concentrate (Gryllus assimilis)

Edible insects can represent an alternative to obtain high-quality proteins with positive biological properties for human consumption. Cricket flour (Gryllus assimilis) was used to obtain cricket protein concentrate (CPC) using pHs (10.0 and 12.0) of extraction and pHs (3.0, 4.0, 5.0, and 6.0) of isoelectric precipitation (pI). Protein content, water and oil absorption capacity, protein solubility, antioxidant, and anti-inflammatory activities were determined. In addition, the protein profile was characterized by electrophoresis and the in vitro CPC digestibility was evaluated. Cricket flour presented 45.75% of protein content and CPC 12-5.0 presented a value of 71.16% protein content using the Dumas method. All samples were more soluble at pH 9.0 and 12.0. CPC 12-3.0 presented a percentage of water-binding capacity (WBC) of 41.25%. CPC 12-6.0 presented a percentage of oil-binding capacity (OBC) of 72.93%. All samples presented a high antioxidant and anti-inflammatory activity. CPC 12-4.0 presented a value FRAP of 70,034 umol trolox equivalents (TE)/g CPC, CPC 12-6.0 presented a value ABTS of 124,300 umol TE/g CPC and CPC 10-3.0 presented a DPPH value of 68,009 umol TE/g CPC. CPC 10-6.0 and CPC 12-6.0 presented high anti-inflammatory activity, with values of 93.55% and 93.15% of protection, respectively. CPCs can be used as functional ingredients in the food industry for their excellent functional and biological properties.

A review of thermosensitive antinutritional factors in plant-based foods

Legumes and cereals account for the vast proportion of people's daily intake of plant-based foods. Meanwhile, a large number of antinutritional factors in legumes and cereals hinder the body absorption of nutrients and reduce the nutritional value of food. In this paper, the antinutritional effects, determination, and passivation methods of thermosensitive antinutritional factors such as trypsin inhibitors, urease, lipoxygenase, and lectin were reviewed to provide theoretical help to reduce antinutritional factors in food and improve the utilization rate of plant-based food nutrition. Since trypsin inhibitors and lectin have been more extensively studied and reviewed previously, the review mainly focused on urease and lipoxygenase. This review summarized the information of thermosensitive antinutritional factors, trypsin inhibitors, urease, lipoxygenase, and lectin, in cereals and legumes. The antinutritional effects, and physical and chemical properties of trypsin inhibitors, urease, lipoxygenase, and lectin were introduced. At the same time, the research methods for the detection and inactivation of these four antinutritional factors were also summarized in the order of research conducted time. The rapid determination and inactivation of antinutrients will be the focus of attention for the food industry in the future to improve the nutritional value of food. Exploring what structural changes could passivation technologies bring to antinutritional factors will provide a theoretical basis for further understanding the mechanisms of antinutritional factor inactivation. PRACTICAL APPLICATIONS: Antinutritional factors in plant-based foods hinder the absorption of nutrients and reduce the nutritional value of the food. Among them, thermosensitive antinutritional factors, such as trypsin inhibitors, urease, lipoxygenase, and lectins, have a high proportion among the antinutritional factors. In this paper, we investigate thermosensitive antinutritional factors from three perspectives: the antinutritional effect of thermosensitive antinutritional factors, determination, and passivation methods. The current passivation methods for thermosensitive antinutritional factors revolve around biological, physical, and chemical aspects, and their elimination mechanisms still need further research, especially at the protein structure level. Reducing the level of antinutritional factors in the future food industry while controlling the loss of other nutrients in food is a goal that needs to be balanced. This paper reviews the antinutritional effects of thermosensitive antinutritional factors and passivation methods, expecting to provide new research ideas to improve the nutrient utilization of food.