Human Risk Assessment of Endocrine-Disrupting Chemicals Derived from Plastic Food Containers

Ultra-processed and fast food consumption, exposure to phthalates during pregnancy, and socioeconomic disparities in phthalate exposures

BACKGROUND

Consuming ultra-processed foods may increase exposure to phthalates, a group of endocrine disruptors prevalent in food contact materials.

OBJECTIVES

Investigate associations between ultra-processed food intake and urinary phthalates during pregnancy, and evaluate whether ultra-processed foods mediate socioeconomic disparities in phthalate exposures.

METHODS

In a socioeconomically diverse sample of 1031 pregnant women from the Conditions Affecting Neurocognitive Development and Learning in Early Childhood (CANDLE) Study in the urban South, the Block Food Frequency Questionnaire was administered and urinary phthalate metabolites were measured in the second trimester. Linear regressions modeled associations between phthalates and overall ultra-processed food consumption, individual ultra-processed foods, and exploratory factor analysis dietary patterns. Causal mediation analyses examined whether ultra-processed food intake mediates relationships between socioeconomic disparities and phthalate exposures.

RESULTS

Ultra-processed foods constituted 9.8-59.0 % (mean = 38.6 %) of participants' diets. 10 % higher dietary proportion of ultra-processed foods was associated with 13.1 % (95 %CI: 3.4 %-22.9 %) higher molar sum concentrations of di(2-ethylhexyl) phthalate metabolites (ΣDEHP). 10 % higher consumption of minimally-processed foods was associated with lower ΣDEHP (10.8 %: 3.4 %-22.9 %). Ultra- and minimally-processed food consumption were not associated with non-DEHP metabolites. Standard deviation higher consumptions of hamburger/cheeseburger, French fries, soda, and cake were associated with 10.5 % (4.2 %-17.1 %), 9.2 % (2.6 %-16.2 %), 7.4 % (1.4 %-13.6 %), and 6.0 % (0.0 %-12.4 %), respectively, higher ΣDEHP. Exploratory factor analysis corroborated positive associations of processed food with ΣDEHP, and uncovered a healthy dietary pattern associated with lower urinary ΣDEHP, mono(2-ethyl-5-hydroxyhexyl) (MEHHP), mono(2-ethyl-5-carboxypentyl) (MECPP), mono(2-carboxymethylhexyl) (MCMHP), and mono-isononyl (MINP) phthalates. Significant indirect effects indicated that lower income and education levels were associated with 1.9 % (0.2 %-4.2 %) and 1.4 % (0.1 %-3.3 %) higher ΣDEHP, respectively, mediated via increased ultra-processed food consumption.

CONCLUSIONS

Consumption of ultra-processed foods may increase exposure to phthalates. Policies to reduce dietary phthalate exposures from food packaging and processing are needed, as socioeconomic barriers can preclude dietary recommendations as a sole means to reduce phthalate exposures.

Relationship between the use of plastics in refrigerator food storage and urine phthalate metabolites: the Korean National Environmental Health Survey (KoNEHS) cycle 3

Background

Plastics are high-molecular-weight materials composed of long carbon chains. They are prevalent in daily life, present in various items such as food containers and microwavable packaging. Phthalates, an additive used to enhance their flexibility, are endocrine-disrupting chemicals. We utilized the data from the Korean National Environmental Health Survey (KoNEHS) cycle 3, representing the general South Korean population, to investigate the relationship between the use of plastics in refrigerator food storage and phthalate exposure.

Methods

We assessed 3,333 adult participants (aged ≥ 19 years) including 1,526 men and 1,807 women, using data from KoNEHS cycle 3. Using the 75th percentile concentration, urine phthalate metabolites were categorized into high and low-concentration groups. χ2 test was conducted to analyze variations in the distribution of each variable, considering sociodemographic factors, health-related factors, food intake, the use of plastics, and the concentration of urine phthalate metabolites as the variables. To calculate odds ratios (ORs) for the high-concentration group of urine phthalate metabolites based on the use of plastics in refrigerator food storage, logistic regression analysis was conducted.

Results

In men, the use of plastics in refrigerator food storage had significantly higher adjusted ORs compared to those using the others. The adjusted ORs were calculated as follows: mono-(2-ethyl-5-hydroxyhexyl) phthalate (MEHHP) had an OR of 1.35 (95% confidence interval [CI]: 1.05-1.72), mono-(2-ethyl-5-oxohexyl) phthalate (MEOHP) had an OR of 1.48 (95% CI: 1.16-1.88), mono-(2-ethyl-5-carboxypentyl) phthalate (MECPP) had an OR of 1.32 (95% CI: 1.04-1.66), ∑di(2-ethylhexyl) phthalate (∑DEHP) had an OR of 1.37 (95% CI: 1.08-1.74) and mono-n-butyl phthalate (MnBP) had an OR of 1.44 (95% CI: 1.13-1.84).

Conclusion

The concentrations of urine phthalate metabolites (MEHHP, MEOHP, MECPP, ∑DEHP, and MnBP) were significantly higher in men who used plastics in refrigerator food storage compared to those using the others.

Assessment of the plasticizer exposure of hospital workers regularly handling medical devices: A pilot study

Plastic medical devices, e.g. infusion sets, blood bags or tubing material, that are used manifold in the medical treatment of hospital patients, usually contain considerable amounts of plasticizers. Whereas several studies showed highly elevated inner plasticizer levels of patients treated with plasticized medical devices, little is known about the exposure situation of hospital staff. The present pilot study aimed to evaluate the urinary plasticizer metabolite levels of selected hospital workers of the blood bank (medical technical assistants, MTA) and of perfusionists that are regularly handling plasticized medical devices in order to estimate the work-related amount of the inner individual plasticizer exposure. The study subjects were asked to collect pre- and post-shift spot urine samples over the course of a working week, that were subsequently analyzed for selected urinary metabolites of the plasticizers DEHP, DINCH, DEHTP and TEHTM. Although the observed differences were rather low, a differentiated approach revealed a perceptible impact of the respective workplace environment on the individual urinary plasticizer metabolite levels. Thus, the group of blood bank MTA showed significantly elevated increment levels of urinary DEHP and DINCH metabolites, while the group of perfusionists, showed a considerable higher detection frequency of the main urinary TEHTM metabolite. All in all, however, it can be cautiously concluded by the results of the presented pilot study that a regular handling of plasticized medical devices by hospital employees (via inhalation or dermal contact) contributes demonstrably but yet only marginally to the individual internal plasticizer exposure.

Endocrine disrupting compounds in the baby's world - A harmful environment to the health of babies

Globally, there has been a significant increase in awareness of the adverse effects of chemicals with known or suspected endocrine-acting properties on human health. Human exposure to endocrine disrupting compounds (EDCs) mainly occurs by ingestion and to some extent by inhalation and dermal uptake. Although it is difficult to assess the full impact of human exposure to EDCs, it is well known that timing of exposure is of importance and therefore infants are more vulnerable to EDCs and are at greater risk compared to adults. In this regard, infant safety and assessment of associations between prenatal exposure to EDCs and growth during infancy and childhood has been received considerable attention in the last years. Hence, the purpose of this review is to provide a current update on the evidence from biomonitoring studies on the exposure of infants to EDCs and a comprehensive view of the uptake, the mechanisms of action and biotransformation in baby/human body. Analytical methods used and concentration levels of EDCs in different biological matrices (e.g., placenta, cord plasma, amniotic fluid, breast milk, urine, and blood of pregnant women) are also discussed. Finally, key issues and recommendations were provided to avoid hazardous exposure to these chemicals, taking into account family and lifestyle factors related to this exposure.

Consumers' practices and safety perceptions regarding the use of materials for food preparation and storage: Analyses by age group

Food Contact Materials (FCM) are those intended to be in contact with food, during its production, handling, and storage. FCM contain chemicals that could migrate to the foodstuff, posing potential health concerns, and usage practices influence the level of migration. This study assesses the preferences, safety perceptions, and usage practices of Portuguese consumers regarding FCM used for cooking and food storage (cookware). An observational, quantitative, and transversal study was performed through an online survey created for this purpose, which involved 1179 Portuguese adults. Results were analyzed according to age. Safety was the factor considered most important when choosing cookware materials, although the choice criteria varied with age. The majority of respondents recognize the risk of food contamination through cookware. Stainless steel and glass were considered the safest materials for cooking. The materials most used to reserve food are glass and plastic. Older individuals carry out more maintenance of cookware and have greater knowledge about how to wash and store it. Regarding the FCM symbology, there is a general lack of knowledge. Our study demonstrates the need to disseminate reliable information to the general public about cookware, contributing to greater literacy in health and to less exposure to food contact chemicals.

Impacts of nano/micro-plastics on safety and quality of aquatic food products

The spread of nano/microplastics (N/MPs) pollution has gained importance due to the associated health concerns. Marine environment including fishes, mussels, seaweed and crustaceans are largely exposed to these potential threats. N/MPs are associated with plastic, additives, contaminants and microbial growth, which are transmitted to higher trophic levels. Foods from aquatic origin are known to promote health and have gained immense importance. Recently, aquatic foods are traced to transmit the nano/microplastic and the persistent organic pollutant poising hazard to humans. However, microplastic ingestion, translocation and bioaccumulation of the contaminant have impacts on animal health. The level of pollution depends upon the pollution in the zone of growth for aquatic organisms. Consumption of contaminated aquatic food affects the health by transferring the microplastic and chemicals. This chapter describes the sources and occurrence of N/MPs in marine environment, detailed classification of N/MPs based on the properties influencing associated hazard. Additionally, occurrence of N/MPs and their impact on quality and safety in aquatic food products are discussed. Lastly, existing regulations and requirements of a robust framework of N/MPs are reviewed.

NLRP3 inflammasome as a sensor of micro- and nanoplastics immunotoxicity

Micro- and nanoplastics (MNPs) are emerging pollutants with scarcely investigated effects on human innate immunity. If they follow a similar course of action as other, more thoroughly investigated particulates, MNPs may penetrate epithelial barriers, potentially triggering a cascade of signaling events leading to cell damage and inflammation. Inflammasomes are intracellular multiprotein complexes and stimulus-induced sensors critical for mounting inflammatory responses upon recognition of pathogen- or damage-associated molecular patterns. Among these, the NLRP3 inflammasome is the most studied in terms of activation via particulates. However, studies delineating the ability of MNPs to affect NLRP3 inflammasome activation are still rare. In this review, we address the issue of MNPs source and fate, highlight the main concepts of inflammasome activation via particulates, and explore recent advances in using inflammasome activation for assessment of MNP immunotoxicity. We also discuss the impact of co-exposure and MNP complex chemistry in potential inflammasome activation. Development of robust biological sensors is crucial in order to maximize global efforts to effectively address and mitigate risks that MNPs pose for human health.

Recent Trends in Multiclass Analysis of Emerging Endocrine Disrupting Contaminants (EDCs) in Drinking Water

Ingestion of water is a major route of human exposure to environmental contaminants. There have been numerous studies exploring the different compounds present in drinking water, with recent attention drawn to a new class of emerging contaminants: endocrine-disrupting compounds (EDCs). EDCs encompass a broad range of physio-chemically diverse compounds; from naturally occurring to manmade. Environmentally, EDCs are found as mixtures containing multiple classes at trace amounts. Human exposure to EDCs, even at low concentrations, is known to lead to adverse health effects. Therefore, the ability to evaluate EDC contamination with a high degree of sensitivity and accuracy is of the utmost importance. This review includes (i) discussion on the perceived and actual risks associated with EDC exposure (ii) regulatory actions that look to limit EDC contamination (iii) analytical methods, including sample preparation, instrumentation and bioassays that have been advanced and employed for multiclass EDC identification and quantitation.

Using in vitro bioassays to guide the development of safer bio-based polymers for use in food packaging

Petroleum-based polymers traditionally used for plastic packaging production have been shown to leach dangerous chemicals such as bisphenol-A (BPA). Bio-based polymers are potentially safer alternatives, and many can be sustainably sourced from waste streams in the food industry. This study assesses bio-based polymers undergoing food packaging development for migration of endocrine disrupting leachates at the level of estrogen, androgen and progestagen nuclear receptor transcriptional activity. Reporter gene assays were coupled with migration testing, performed using standardised test conditions for storage and temperature. Test samples include nine bio-based polymers and four inorganic waste additives mixed with a traditional petroleum-based polymer, polypropylene. Thermoplastic starch material, polybutylene succinate, polycaprolactone, polybutylene adipate terephthalate (PBAT), two polylactic acid (PLA)/PBAT blends, polyhydroxybutyrate (PHB) and eggshell/polypropylene (10:90) presented no significant reduction in metabolic activity or hormonal activity under any test condition. Polypropylene (PP) presented no hormonal activity. Metabolic activity was reduced in the estrogen responsive cell line after 10 days migration testing of eggshell/polypropylene (0.1:99.9) in MeOH at 40°C, and PP in MeOH and dH₂0. Estrogenic agonist activity was observed after 10 days in poultry litter ash/polypropylene (10:90) in MeOH at 20°C and 40°C, poultry feather based polymer in MeOH and dH₂O at 40°C, and eggshell/polypropylene (40:60) and PLA in dH₂O at 40°C. Activity was within a range of 0.26–0.50 ng 17β-estradiol equivalents per ml, equating to an estrogenic potency of 3–∼2800 times less than the estrogenic leachate BPA. Poultry litter ash/polypropylene (10:90) in MeOH for 10 days presented estrogenic activity at 20°C and 40°C within the above range and anti-androgenic activity at 40°C. Progestagenic activity was not observed for any of the compounds under any test condition. Interestingly, lower concentrations of eggshell or PP may eliminate eggshell estrogenicity and PP toxicity. Alternatively eggshell may bind and eliminate the toxic elements of PP. Similarly, PLA estrogenic activity was removed in both PLA/PBAT blends. This study demonstrates the benefits of bioassay guidance in the development of safer and sustainable packaging alternatives to petroleum-based plastics. Manipulating the types of additives and their formulations alongside toxicological testing may further improve safety aspects.

Bio-Based Degradable Poly(ether-ester)s from Melt-Polymerization of Aromatic Ester and Ether Diols

Vanillin, as a promising aromatic aldehyde, possesses worthy structural and bioactive properties useful in the design of novel sustainable polymeric materials. Its versatility and structural similarity to terephthalic acid (TPA) can lead to materials with properties similar to conventional poly(ethylene terephthalate) (PET). In this perspective, a symmetrical dimethylated dialkoxydivanillic diester monomer (DEMV) derived from vanillin was synthesized via a direct-coupling method. Then, a series of poly(ether-ester)s were synthesized via melt-polymerization incorporating mixtures of phenyl/phenyloxy diols (with hydroxyl side-chains in the 1,2-, 1,3- and 1,4-positions) and a cyclic diol, 1,4-cyclohexanedimethanol (CHDM). The polymers obtained had high molecular weights (M_w = 5.3–7.9 × 10⁴ g.mol⁻¹) and polydispersity index (Đ) values of 1.54–2.88. Thermal analysis showed the polymers are semi-crystalline materials with melting temperatures of 204–240 °C, and tunable glass transition temperatures (T_g) of 98–120 °C. Their 5% decomposition temperature (T_d,5%) varied from 430–315 °C, which endows the polymers with a broad processing window, owing to their rigid phenyl rings and trans-CHDM groups. These poly(ether-ester)s displayed remarkable impact strength and satisfactory gas barrier properties, due to the insertion of the cyclic alkyl chain moieties. Ultimately, the synergistic influence of the ester and ether bonds provided better control over the behavior and mechanism of in vitro degradation under passive and enzymatic incubation for 90 days. Regarding the morphology, scanning electron microscopy (SEM) imaging confirmed considerable surface degradation in the polymer matrices of both polymer series, with weight losses reaching up to 35% in enzymatic degradation, which demonstrates the significant influence of ether bonds for biodegradation.

An introduction to the sources, fate, occurrence and effects of endocrine disrupting chemicals released into the environment

Many classes of compounds are known or suspected to disrupt the endocrine system of vertebrate and invertebrate organisms. This review of the sources and fate of selected endocrine disrupting chemicals (EDCs) in the environment includes classes of compounds that are "legacy" contaminants, as well as contaminants of emerging concern. EDCs included for discussion are organochlorine compounds, halogenated aromatic hydrocarbons, brominated flame retardants, per- and polyfluoroalkyl substances, alkylphenols, phthalates, bisphenol A and analogues, pharmaceuticals, drugs of abuse and steroid hormones, personal care products, and organotins. An exhaustive survey of the fate of these contaminants in all environmental media (e.g., air, water, soil, biota, foods and beverages) is beyond the scope of this review, so the priority is to highlight the fate of EDCs in environmental media for which there is a clear link between exposure and endocrine effects in humans or in biota from other taxa. Where appropriate, linkages are also made between the fate of EDCs and regulatory limits such as environmental quality guidelines for water and sediments and total daily intake values for humans.

Interventions on Reducing Exposure to Endocrine Disrupting Chemicals in Human Health Care Context: A Scoping Review

Purpose

Inevitability of exposure to endocrine disrupting chemicals (EDCs) in daily lives of modern society is increasing interests in developing and implementing interventions to prevent or reduce harmful health effects of EDCs in various academic areas. This is a scoping review of intervention studies aimed at reducing exposure to EDCs in the text of human health care.

Methods

Scoping review methodology was used to explore the extent, range, and nature of current literature. A comprehensive systematic search of PubMed, CINAHL, Cochrane, PcycINFO, EMBASE, and RISS was performed for studies published to date. The authors followed Arksey and O’Malley’s stages; 1) identification of research questions; 2) identification of relevant studies using a total of six electronic databases; 3) study selection; 4) charting the data; and 5) collation, summarization and reporting of the data.

Results

A total of 2114 articles were retrieved, from which 13 articles were included in the final review. Among the 13 studies, 12 conducted interventions regarding dietary modification or replacement of household or personal goods. The duration of interventions ranged from at least three days to a maximum of six months, including six studies with a period of less than ten days. The participants were all healthy populations, eight of which were for adults, three for children or adolescents, and two for families. Outcome of the interventions were measured through concentration of EDCs in urine or/and house air. The effects of the interventions were inconsistent, with 11 studies showing significant changes of EDC concentration while no significant change was found in two studies.

Conclusion

The results indicate a need for randomized controlled trials, participant-centered studies promoting active participation and practices of subjects, studies specifying subgroups of participants, and studies including families as units in interventions.

Method development using chemometric tools for determination of endocrine-disrupting chemicals in bottled mineral waters

A simple method was developed to determine 14 endocrine-disrupting chemicals (EDCs) in bottled waters, based on dispersive micro-solid phase extraction (d-µ-SPE) and liquid chromatography-mass spectrometry (LC-MS). Extraction was optimized using 2 ^k-1 factorial and Doehlert experimental designs. Optimized conditions were 80 mg C18, 25 min extraction at 1000 rpm, and 6 min desorption time. Repeatability was below 17 % for all EDCs. LOD and LOQ varied from 1.60 ng L^-1 (estradiol, E2) to 23.2 ng L^-1 (dimethylphthalate, DMP) and from 5.33 ng L^-1 (E2) to 77.3 ng L^-1 (DMP). We found DMP and bisphenol A (BPA) in samples after the heat treatment. DMP was up to 58.7 µg L^-1, while BPA was up to 1.34 µg L^-1. Tolerance of daily intake (TDI) for DMP were 2.50-2.94 µg kg^-1 day^-1 (children) and 1.43-1.68 µg kg^-1 day^-1 (adults). TDI for BPA were 0.03-0.07 µg kg^-1 day^-1 (children) and 0.01-0.04 µg kg^-1 day^-1 (adults).

Human health and ecological risk assessment of 98 pharmaceuticals and personal care products (PPCPs) detected in Indian surface and wastewaters

The release of pharmaceuticals and personal care products (PPCPs) in environmental waters has become an urgent issue due to their pseudo-persistent traits. The present study was undertaken to conduct a screening-level risk assessment of 98 PPCPs, detected in different water matrices (treated wastewater, surface water, and groundwater) of India, for evaluating ecological risk (risk to fish, daphnia, and algae), human health risk, and antimicrobial resistance (AMR) selection risk by following risk quotient (RQ) based methodology. In the present study, 47% of the detected PPCPs in Indian waters were found to exert a possible risk (RQ > 1) to either aquatic species and human health, or cause AMR selection risk. 17 out of 25 antibiotics detected in the environmental waters were found to pose a threat of AMR selection. 11 out of 49 pharmaceuticals were found to exert human health risk from ingesting contaminated surface water, whereas only 2 pharmaceuticals out of 25 were found to exert risk from the intake of groundwater. Very high RQs (>1000) for few pharmaceuticals were obtained, signifying a great potential of the detected PPCPs in causing severe health concern, aquatic toxicity, and AMR spread. Within India, special attention needs to be given to the pharmaceutical hubs, as the environmental waters in these regions were found to be severely contaminated with drug residues resulting in extremely high RQs. The present study will be helpful in prioritizing the detected PPCPs in the environmental waters of India, for which immediate attention and enforceable guidelines are required.

Concentrations of bisphenols, benzophenone-type ultraviolet filters, triclosan, and triclocarban in the paired urine and blood samples from young adults: Partitioning between urine and blood

Bisphenols (BPs), benzophenone-type UV filters (BP-type UV filters), triclosan (TCS), and triclocarban (TCC) are endocrine-disrupting chemicals (EDCs) and commonly used in consumer and personal care products. In the present study, seven BPs, eight BP-type UV filters, TCS, and TCC were quantified in 196 paired urine and blood samples collected from young adults in South China. Benzophenone-7 and benzophenone-9 were not detected in all samples, while other target compounds were widely detected in 39%-96% of the urine and 14%-96% of the blood samples, and the median concentrations ranged from <0.02 (specific gravity adjusted: < 0.02) to 2.33 (2.05) ng/mL and <0.01-2.66 ng/mL in the urine and blood samples, respectively. Females had higher levels of most target analytes, and gender-related differences (p < 0.05) were found in the blood levels of benzophenone-2 (females vs. males: 0.84 vs. <0.01 ng/mL), ΣBP (sum of BP-type UV filters; 1.61 vs. 0.98 ng/mL), TCS (3.89 vs. 1.69 ng/mL), and ΣTC (sum of TCS and TCC; 5.77 vs. 3.02 ng/mL). We calculated the portioning of the target compounds between blood and urine (B/U ratios). The B/U ratios of bisphenol F, benzophenone-2, benzophenone-6, 4-hydroxy benzophenone, TCS, and TCC were higher than 1, showing that these analytes have higher enrichment capacities in human blood. To the best of our knowledge, this is the first study to simultaneously analyze the concentrations of BPs, BP-type UV filters, TCS, and TCC in the paired urine and blood samples of young adults in South China.

Urinary Concentrations of Major Phthalate and Alternative Plasticizer Metabolites in Children of Thailand, Indonesia, and Saudi Arabia, and Associated Risks

Phthalates are widely used in consumer products and are well-known for adverse endocrine outcomes. Di-(2-ethylhexyl) phthalate (DEHP), one of the most extensively used phthalates, has been rapidly substituted with alternative plasticizers in many consumer products. The aim of this study was to assess urinary phthalate and alternative plasticizer exposure and associated risks in children of three Asian countries with different geographical, climate, and cultural characteristics. Children were recruited from elementary schools of Saudi Arabia (n = 109), Thailand (n = 104), and Indonesia (n = 89) in 2017-2018, and their urine samples were collected. Metabolites of major phthalates and alternative plasticizers were measured in the urine samples by HPLC-MS/MS. Urinary metabolite levels differed substantially between the three countries. Metabolite levels of diisononyl phthalate (DiNP), diisodecyl phthalate (DiDP), di(2-ethylhexyl) terephthalate (DEHTP), and 1,2-cyclohexane dicarboxylic acid diisononyl ester (DINCH) were the highest in Saudi children: Median urinary concentrations of oxo-MiNP, OH-MiDP, 5cx-MEPTP, and OH-MINCH were 8.3, 8.4, 128.0, and 2.9 ng/mL, respectively. Urinary DEHP metabolite concentrations were the highest in the Indonesian children. The hazard index (HI) derived for the plasticizers with antiandrogenicity based reference doses (RfD_AA) was >1 in 86%, 80%, and 49% of the Saudi, Indonesian, and Thai children, respectively. DEHP was identified as a common major risk driver for the children of all three countries, followed by DnBP and DiBP depending on the country. Among alternative plasticizers, urinary DEHTP metabolites were detected at levels comparable to those of DEHP metabolites or higher among the Saudi children, and about 4% of the Saudi children exceeded the health based human biomonitoring (HBM)-I value. Priority plasticizers that were identified among the children of three countries warrant refined exposure assessment for source identification and relevant exposure reduction measures.

Profiles of parabens, benzophenone-type ultraviolet filters, triclosan, and triclocarban in paired urine and indoor dust samples from Chinese university students: Implications for human exposure

Parabens, benzophenone (BP)-type UV filters, triclosan (TCS), and triclocarban (TCC) are commonly used in personal care products. Human exposure to these compounds has received increasing concern because of their adverse health effects. However, the levels of these chemicals in paired urine and indoor samples have never been simultaneously measured. In this work, eight parabens, eight BP-type UV filters, TCS, and TCC were measured in paired urine and indoor dust samples collected from university students and their dormitories in South China. The target analytes were commonly measured in urine (71%-100%) and indoor dust (30%-98%), with median concentrations ranging from 0.16 ng/mL to 19.3 ng/mL in urine and from <0.01 ng/g to 3700 ng/g in indoor dust samples. Females had high levels of most of these target compounds, and gender-related differences were found in the levels of most target analytes. Positive correlations were found in the levels of methylparaben, ethyl paraben, benzophenone-3, and TCS between urine and indoor dust samples. This finding suggested that indoor dust is an important source for human exposure to these compounds. The estimated daily intake (EDI) of these analytes in paired samples was also evaluated. The median EDI_-urine values of target analytes varied in the range of 4.02-59,280 ng/kg bw/day. Females had higher median EDI_-urine values for most of target analytes than males. In addition, the median EDI_{-indoor dust} values of most target analytes in dust from female dormitories were higher than those in dust from male dormitories. Indoor dust ingestion only had minor contribution (<0.5%) to the total exposure. To the best of the authors' knowledge, this study is the first to simultaneously analyze the concentrations of parabens, BP-type UV filters, TCS, and TCC in the paired urine and indoor samples from university students in South China.

Migration Behavior of Lubricants in Polypropylene Composites under Accelerated Thermal Aging

The surface migration of lubricants degrades the quality of thermoplastic polymer composites. In this study, the surface migration of lubricants in polypropylene composites were studied to improve the quality of the composites. Polypropylene (PP)/lubricant composites were manufactured using a co-rotating twin-screw extruder and injection molding, and the migration phenomena of the lubricant in the PP/lubricant composites were investigated under accelerated aging conditions with temperatures in the range of 20 to 90 °C and humidity of 100% for 72 h. The interrelation between the surface migration properties of PP/lubricant composites were investigated by considering their microstructural and morphological features, which were influenced by the thermal aging conditions. Further, the microstructural and morphological features were examined by contact angle, surface energy, attenuated total reflectance Fourier-transform infrared spectrometry, X-ray photoelectron spectroscopy, close-up digital imaging, and atomic force microscopy analyses. The polypropylene composites containing the magnesium stearate as the lubricant were found to exhibit a more stable migration behavior than the polypropylene composites containing a calcium stearate lubricant. This is attributed to multiple synergistic factors, such as interfacial tension and work of adhesion between PP and the lubricant. The findings of this study can be utilized to effectively manufacture high-quality thermoplastic composites for the fourth industrial revolution.

Food Waste and Nutrition Quality in the Context of Public Health: A Scoping Review

Food waste and nutrition are intrinsically linked in terms of environmental health and public health. Despite this, it is unknown whether these topics have been previously synthesized into a review. The aim was to identify the interdisciplinary parameters that exist in public health and nutrition literature in terms of food waste and plastic waste associated with food, and to identify how these parameters currently contribute to food sustainability messaging and interventions. A rapid scoping review was conducted. Data were mapped into concepts and synthesized in a narrative review. Four main concepts were identified: (1) food waste and diet quality, nutrient losses, and environmental health, (2) food waste reduction interventions and diet quality, (3) food banks/pantries and diet/nutritional quality, and (4) food and plastic waste messaging in nutrition or dietary guidelines. Food waste is associated with nutrient wastage, and interventions to reduce food waste can successfully address food sustainability and nutrition quality. Food redistribution systems do not currently address access to sustainably sourced foods that are also nutrient-dense for lower-income communities. Opportunities for future research and practice include aligning food waste, plastic waste, and nutrition priorities together and developing better food redistribution systems to limit wastage of high-quality foods.

Physiologically based kinetic (PBK) modelling and human biomonitoring data for mixture risk assessment

Human biomonitoring (HBM) data can provide insight into co-exposure patterns resulting from exposure to multiple chemicals from various sources and over time. Therefore, such data are particularly valuable for assessing potential risks from combined exposure to multiple chemicals. One way to interpret HBM data is establishing safe levels in blood or urine, called Biomonitoring Equivalents (BE) or HBM health based guidance values (HBM-HBGV). These can be derived by converting established external reference values, such as tolerable daily intake (TDI) values. HBM-HBGV or BE values are so far agreed only for a very limited number of chemicals. These values can be established using physiologically based kinetic (PBK) modelling, usually requiring substance specific models and the collection of many input parameters which are often not available or difficult to find in the literature. The aim of this study was to investigate the suitability and limitations of generic PBK models in deriving BE values for several compounds with a view to facilitating the use of HBM data in the assessment of chemical mixtures at a screening level. The focus was on testing the methodology with two generic models, the IndusChemFate tool and High-Throughput Toxicokinetics package, for two different classes of compounds, phenols and phthalates. HBM data on Danish children and on Norwegian mothers and children were used to evaluate the quality of the predictions and to illustrate, by means of a case study, the overall approach of applying PBK models to chemical classes with HBM data in the context of chemical mixture risk assessment. Application of PBK models provides a better understanding and interpretation of HBM data. However, the study shows that establishing safety threshold levels in urine is a difficult and complex task. The approach might be more straightforward for more persistent chemicals that are analysed as parent compounds in blood but high uncertainties have to be considered around simulated metabolite concentrations in urine. Refining the models may reduce these uncertainties and improve predictions. Based on the experience gained with this study, the performance of the models for other chemicals could be investigated, to improve the accuracy of the simulations.

Evaluation of estrogenic chemicals in capsule and French press coffee using ultra-performance liquid chromatography with tandem mass spectrometry

•

Liquid chromatography with tandem mass spectrometry detected estrogenic chemicals in coffee.

•

The potential risk to health is likely to be low relative to established guidelines.

•

Future studies should evaluate the health risk from chronic coffee consumption.

The objective of this study was to examine exposure to estrogenic chemicals (ECs) via capsule coffee. Twenty-two brands of capsule coffee and 15 brands of French press coffee for comparison were brewed, and their contents of ECs were identified and quantified using ultra-performance liquid chromatography with tandem mass spectrometry. Exposure to ECs in coffee were compared to tolerable daily intake guidelines to assess potential hazard to health. Benzophenone was the most frequently detected EC in capsule coffee (mean concentration ± SD: 20.37 ± 47.07 ng/mL, n = 6), followed by bisphenol A (BPA, 0.31 ± 0.71, n = 4), dibutyl phthalate (1.41 ± 3.58, n = 3), 4-nonylphenol (0.67 ± 1.82, n = 3) and bisphenol F (BPF, 0.49 ± 1.54, n = 2). BPA and BPF were each detected in 3 French press coffee samples (0.29 ± 0.58 and 0.85 ± 1.75 ng/mL, respectively). Two French press coffee brands purchased as ground coffee rather than whole bean were positive for ECs (BPA in one and BPF in both). Hazard indexes were below 1.0 for each EC for both coffee types. These results indicate that there is EC contamination in capsule and French press coffee, but the quantities of ECs are low relative to established safety guidelines.

Migration characteristics of heavy metals during simulated use of secondary products made from recycled e-waste plastic

Recycling of plastics from e-waste can conserve resources, however, aging during the use of plastic products can cause the migration of heavy metals in additives. This study presents a methodology for evaluating the risks of heavy metals in waste plastic secondary products during long term use associated with heavy metal migration. The study processes were investigated by: (1) recycling waste plastics and producing secondary products; (2) thermal aging of secondary products; and (3) toxic leaching used to quantitatively analyse the dissolution of heavy metals. Combined with the changes in mechanical properties and microstructure, the effect of aging on the migration of heavy metals was observed. The results showed that the polymer appeared to delaminate, the adhesion of waste plastics to additives decreased, and the mechanical properties clearly decreased after the thermal aging experiment. Leaching experiments showed that the leached concentrations of Ni, Cu, Zn, Pb, and Sb in the three types waste plastic products increased over time. After 8 d of aging, the leached concentrations of Ni, Sb, and Pb exceeded the third, fourth, and third class of the groundwater quality standard, respectively. Specifically, the concentrations of Sb were 141, 289, and 21.1 times higher than the maximum permissible level. Therefore, management hierarchy and safe environmental recycling methods should be developed to reduce the risk of heavy metals in waste plastic secondary products.

Migration of heavy metal in electronic waste plastics during simulated recycling on a laboratory scale

Recycling is the primary method to handle electronic waste plastics, however, little attention has been paid to the risk posed by heavy metal migration in waste plastic products. The effect of multistage recycling processes on heavy metal migration and the environmental risk posed by heavy metals during recycling processes were investigated by: (1) Recycling waste plastics and determining the heavy metal contents in secondary products; (2) Using toxic leaching experiments to assess environmental risks of heavy metal migration in secondary products; and (3) Evaluating the effect of recycling processes on the mechanical properties and microstructure of plastics. Results showed that the contents of some harmful heavy metals in processed products exceeded the Safety of Toys Standard. Toxic leaching tests showed that Ni, Cu, Zn, Pb, and Sb migrated outward during secondary products use. With increased recycling times, concentrations of migrated Ni, Cu, Zn, Pb, and Sb increased, and the leached concentrations exceeded the limits stipulated in the Groundwater Quality Standard. Increased recycling times also accelerated waste plastics aging and caused the deterioration of mechanical properties. Furthermore, adhesion between layers decreased, stratification and cracking in polymers appeared, and adhesion of waste plastics to additives decreased. Therefore, the environmental risks of waste plastic recycling should be carefully considered.

Automated on-line liquid-liquid extraction in a multisyringe flow injection analysis manifold for migration studies in food-contact materials: analysis of 4,4´-dihydroxybiphenyl

Packaging may represent a source of food contamination, as different organic compounds and degradation compounds may migrate from packaging to foodstuff. For fatty foods, rectified olive oil is the common simulant, which implies time-consuming and laborious liquid-liquid extraction (LLE) procedures to isolate the contaminant(s) from the oil. Here we propose a Multisyringe Flow Injection Analysis manifold to automate this sample treatment, using the monomer 4,4´-dihydroxybiphenyl as the contaminant. The LLE procedure, using water as extractant, was fully automated. After the on-line LLE, the resulting extract was pumped through a fluorescence detector, inside which a flow-cell filled with C₁₈ silica gel solid support was placed. The analyte was pre-concentrated on the solid support (in which the analytical signal was directly recorded), so improving the sensitivity of the system. Under optimum conditions, the method detection limit is 0.05 mg kg^-1, well within the specific migration limit of 6 mg kg^-1. The method developed was compared with the standard CEN test method (off-line LLE and HPLC determination) observing savings in sample and reagents of 90% and a 7-fold increase in sample throughput.

Leaching of endocrine disrupting chemicals from marine microplastics and mesoplastics under common life stress conditions

Microplastics (MPs) and mesoplastics are able to sorb harmful substances and often contain additives, e.g., endocrine disrupting chemicals (EDCs), that can cause adverse effects to organisms. The present study aims to determine EDC concentrations and their endocrine activities in leachates of field-collected marine MPs and mesoplastics under stress conditions that are known to occur during the plastic life cycle. Estrogens were the dominant EDCs on plastic particles and were either concentrated from the surrounding water or originated from plastic manufacturing. Bisphenol A had the highest detection frequency (75%) with an average concentration of 475 ± 882 μg/kg, followed by bisphenol S, octylphenol and nonylphenol. Moreover, smaller marine MPs leached greater quantities of EDCs because the sorption from surrounding seawater is more efficient for smaller particles. It was found that normal life stresses such as microwaving (MW) and autoclaving (AC) can decrease EDC concentrations, but solar irradiation (solar) can increase EDC concentrations in leachates. Even though organisms with higher metabolic ability exhibited greater estrogenic effects, the comprehensive toxicity of plastic leachates after common life treatments was still limited (below the EC₁₀ value) if 0.1% is taken as the EDC uptake from plastic. In future studies, the accurate contribution of plastic bound EDCs needs to be further explored, and the monitoring of MPs and mesoplastics in the human diet remains important because the concentrations of these plastics may change in the future.

Unhealthy Levels of Phthalates and Bisphenol A in Mexican Pregnant Women with Gestational Diabetes and Its Association to Altered Expression of miRNAs Involved with Metabolic Disease

Several studies indicate that bisphenol A (BPA) and phthalates may have a role in the development of metabolic diseases using different molecular pathways, including epigenetic regulatory mechanisms. However, it is unclear whether exposure to these chemicals modifies serum levels of miRNAs associated with gestational diabetes mellitus (GDM) risk. In the present study, we evaluated the serum levels of miRNAs associated with GDM (miR-9-5p, miR-16-5p, miR-29a-3p and miR-330-3p) and urinary levels of phthalate metabolites (mono-n-butyl phthalate (MBP), mono-isobutyl phthalate (MiBP), mono-benzyl phthalate (MBzP) and mono(2-ethyl hexyl) phthalate (MEHP)) and bisphenol A in GDM patients and women without GDM during the second trimester of gestation. We observed higher levels of miR-9-5p, miR-29a-3p and miR-330-3p in sera of patients with GDM compared to non-diabetic subjects. Phthalates were detected in 97–100% of urine samples, while BPA only in 40%. Urinary MEHP and BPA concentrations were remarkably higher in both study groups compared to previously reported data. Unadjusted MEHP levels and adjusted BPA levels were higher in non-diabetics than in GDM patients (p = 0.03, p = 0.02). We found positive correlations between adjusted urinary MBzP levels and miR-16-5p expression levels (p < 0.05), adjusted MEHP concentrations and miR-29a-3p expression levels (p < 0.05). We also found negative correlations between unadjusted and adjusted MBP concentrations and miR-29a-3p expression levels (p < 0.0001, p < 0.05), unadjusted MiBP concentrations and miR-29a-3p expression levels (p < 0.01). Urinary MEHP levels reflect a striking exposure to di(2-ethylhexyl) phthalate (DEHP) in pregnant Mexican women. This study highlights the need for a regulatory strategy in the manufacture of several items containing endocrine disruptors in order to avoid involuntary ingestion of these compounds in the Mexican population.

Effect of Chitosan- and Alginate-Based Coatings Enriched with Cinnamon Essential Oil Microcapsules to Improve the Postharvest Quality of Mangoes

During this study, fresh mangoes were packed into multilayer coatings made from chitosan containing cinnamon essential oil microcapsules and alginate solutions that were alternately deposited on the mango surfaces by electrostatic interaction. We then compared the physical and chemical indexes to examine the changes in the mangoes during 14 d of storage. The results showed that the microcapsules prepared in the experiment were of uniform size, with the sustained release of essential oil exceeding 168 h. Compared with uncoated mangoes, the mangoes coated with the coatings could effectively inhibit the decrease of the titratable acid, soluble solids, and vitamin C contents; slow down the increase of the weight loss and pH; delay the appearance of mango respiration peaks; and preserve the firmness at storage conditions of 25 °C and 50% RH. Our findings revealed that mangoes without treatment showed losses in their edible and commercial value after 14 days in storage, and the mangoes coated with five layers still retained food and commercial value. Cross-sectional scanning electron microscopy images of the coatings showed that they had distinct layers and were of good uniformity and tight binding, and they also had good adhesion to the mango surface. These findings provide important insights into the use of coatings for the packaging of fruits during storage, which is essential for promoting the application of coatings for packaging preservation without big cost and expensive equipment.

Physiological Adaptation to Simultaneous Chronic Exposure to High-Fat Diet and Dichlorodipheniletylhene (DDE) in Wistar Rat Testis

Environmental chemicals can be introduced by consuming contaminated foods. The environmental chemical dichlorodiphenyldichloroethylene (DDE), a persistent metabolite of dichlorodiphenyltrichloroethane (DDT), can affect spermatogenesis. Our study aims to evaluate, by using spectrophotometric analyses, western blot, and immunohistochemistry, the adaptive responses in testis of adult rats treated with a non-toxic dose of DDE, alone or in association with a high-fat diet (HFD). Four experimental groups were performed: N (normal diet); D (HFD); D + DDE (HFD + DDE); N + DDE (normal diet + DDE). D group showed a reduction in antioxidant capacity, and increases in lipid peroxidation, apoptosis, and proliferation associated with morphological impairment. A reduction in androgen receptor (AR) and serum testosterone levels were also found. DDE-treated groups exhibited higher lipid peroxidation levels compared to N and D, associated with pronounced defect in antioxidant capacity, apoptosis, cellular proliferation, as well as with tissue damage. Moreover, decreases in AR and serum testosterone levels were found in DDE-treated groups vs. N and D. In conclusion, HFD and DDE produced cellular stress leading to antioxidant impairment, apoptosis, and decreases in AR and serum testosterone levels associated with tissue damage. Cellular proliferation could be used as an adaptation to counterbalance the occurred damage, maintaining a pool of tubules that follow physiological maturation.

Identification of non-volatile migrants from baby bottles by UPLC-Q-TOF-MS

Baby bottles made of polypropylene, Tritan® and silicone were evaluated regarding the migration of non-volatile compounds using UPLC-QTOF-MS. Twenty-seven compounds were identified. In all polypropylene samples the migration of 2.2'-(tridecylimino)bis-ethanol and derivatives thereof were detected in concentrations below the specific migration limit (1.2 mg.kg^-1). Furthermore, clarifying agents and glycerol derivatives were detected. Tritan baby bottle showed the migration of one slip additive. On the other hand, twenty compounds were detected in silicone baby bottles. Most of them were unknown compounds derived from acrylates. Once the migrants were identified, the risk assessment was carried out using the Threshold of Toxicological Concern (TTC) approach. The risk assessment of migrants coming from silicone samples showed levels above the threshold recommended as safe for babies.

Determination of the mass transport properties of chemical additives in polypropylene material/simulated food system

The mass transport process (migration) of five additives from three different types of polypropylene (PP) films into selected food simulants was studied. The migration tests were carried out at different time-temperature conditions, and the concentration of additives in polymer matrix and food simulants were analysed by high-performance liquid chromatography (HPLC). With all data, the mass transport properties for migration kinetics (partition and diffusion coefficients) were determined. Results showed that the partition coefficient was affected significantly by the temperature and simulants' properties, whereas little affected by the types of PP film and molecular weight of substance. The polarity, structure and shape of substances can also have an influence in their partition between the polymer matrix and food simulants. Additionally, comparison results between the experimental diffusion coefficients and the calculated values by Piringer model suggested that the current migration model with the default modelling parameters for PP does not describe realistically the diffusion coefficients of additives. The calculated diffusion coefficients were greater than the experimental values, as a consequence, the migration of chemical additives will be overestimated. For more realistic migration calculations, more accurate modelling parameters in Piringer model should be established and the effect of food on migration should be high interest in future work.

Assessment of occupational exposure to pesticide mixtures with endocrine-disrupting activity

Occupational exposure to pesticide mixtures comprising active substance(s) and/or co-formulant(s) with known/possible endocrine-disrupting activity was assessed using long-term activity records for 50 professional operators representing arable and orchard cropping systems in Greece, Lithuania, and the UK. Exposure was estimated using the harmonised Agricultural Operator Exposure Model, and risk was quantified as a point of departure index (PODI) using the lowest no observed (adverse) effect level. Use of substances with known/possible endocrine activity was common, with 43 of the 50 operators applying at least one such active substance on more than 50% of spray days; at maximum, one UK operator sprayed five such active substances and 10 such co-formulants in a single day. At 95th percentile, total exposure was largest in the UK orchard system (0.041 × 10^-2 mg kg bw^-1 day^-1) whereas risk was largest in the Greek cropping systems (PODI 0.053 × 10^-1). All five cropping systems had instances indicating potential for risk when expressed at a daily resolution (maximum PODI 1.2-10.7). Toxicological data are sparse for co-formulants, so combined risk from complex mixtures of active substances and co-formulants may be larger in reality.

Critical review of methods for risk ranking of food-related hazards, based on risks for human health

This study aimed to critically review methods for ranking risks related to food safety and dietary hazards on the basis of their anticipated human health impacts. A literature review was performed to identify and characterize methods for risk ranking from the fields of food, environmental science and socio-economic sciences. The review used a predefined search protocol, and covered the bibliographic databases Scopus, CAB Abstracts, Web of Sciences, and PubMed over the period 1993-2013. All references deemed relevant, on the basis of predefined evaluation criteria, were included in the review, and the risk ranking method characterized. The methods were then clustered-based on their characteristics-into eleven method categories. These categories included: risk assessment, comparative risk assessment, risk ratio method, scoring method, cost of illness, health adjusted life years (HALY), multi-criteria decision analysis, risk matrix, flow charts/decision trees, stated preference techniques and expert synthesis. Method categories were described by their characteristics, weaknesses and strengths, data resources, and fields of applications. It was concluded there is no single best method for risk ranking. The method to be used should be selected on the basis of risk manager/assessor requirements, data availability, and the characteristics of the method. Recommendations for future use and application are provided.

Phthalates and heavy metals as endocrine disruptors in food: A study on pre-packed coffee products

Phthalate plasticizers and heavy metals are widely recognized to be pollutants that interfere with key developmental processes such as masculinization. We investigated the release of phthalates and heavy metals in coffee brewed from coffee packed in single-serve coffee containers made from different types of materials: metal, biodegradable and plastics. We detected with GC-MS small amounts phthalates, below the tolerated daily risks levels, in all the coffees prepared from the different types of capsules. Specifically, Di (2-ethyl-hexyl)-phthalate and DiBP: Diisobuthyl-pthalate were ubiquitously present despite the high variability among the samples (respective range 0.16-1.87 μg/mL and 0.01-0.36 μg/mL). Whereas, diethyl-phthalate (range 0.20-0.26 μg/mL) and di-n-buthyl-phthalate (range 0.02-0.14 μg/mL) were detected respectively in one and three out of the four types of capsule tested. In contrast, we detected by atomic mass spectrometry on mineralized samples heavy metals lead (Pb) and nickel (Ni), in all coffee tested. PB levels (respective range 0.32-211.57 μg/dose) accounted for 42-79%, whereas Ni levels (respective range 166.25-1950.26 μg/dose) accounted for >100% of the tolerable daily intake. These results add to the already present concerns related to the multiple pathways of human exposure and the ubiquitous presence of these pollutants in consumer products and their long-term effect on human health.

Evaluation of Short-Term and Long-Term Migration Testing from Can Coatings into Food Simulants: Epoxy and Acrylic-Phenolic Coatings

Traditionally, migration testing during 10 days at 40 °C has been considered sufficient and appropriate for simulating the potential migration of substances from food-contact materials into foods. However, some packages, such as food cans, may be stored holding food for extended time periods (years). This study attempts to verify whether common testing conditions accurately estimate long-term migration. Two types of can coatings, epoxy and acrylic-phenolic, were subjected to short-term and long-term migration testing (1 day-1.5 years) using food simulants (water, 3% acetic acid, 50% ethanol, and isooctane) at 40 °C. Using HPLC-DAD/CAD, HPLC-MS, UHPLC-HRMS (where HRMS is accurate mass, mass spectrometry), and DART-HRMS, we identified potential migrants before starting the experiment: BPA, BADGE, BADGE derivatives, benzoguanamine, and other relevant marker compounds. During the experiment using a water-based food simulant, migrants remained stable. Most of the cans in contact with 3% acetic acid did not survive the experimental conditions. Tracked migrants were not detected in isooctane. In the presence of 50% ethanol, the traditional migration test during 10 days at 40 °C did not predict migration during long-term storage. These results suggest that migration protocols should be modified to account for long-term storage.

Predicting diffusion coefficients of chemicals in and through packaging materials

Most of the physicochemical properties in polymers such as activity and partition coefficients, diffusion coefficients, and their activation with temperature are accessible to direct calculations from first principles. Such predictions are particularly relevant for food packaging as they can be used (1) to demonstrate the compliance or safety of numerous polymer materials and of their constitutive substances (e.g. additives, residues…), when they are used: as containers, coatings, sealants, gaskets, printing inks, etc. (2) or to predict the indirect contamination of food by pollutants (e.g. from recycled polymers, storage ambiance…) (3) or to assess the plasticization of materials in contact by food constituents (e.g. fat matter, aroma…). This review article summarizes the classical and last mechanistic descriptions of diffusion in polymers and discusses the reliability of semi-empirical approaches used for compliance testing both in EU and US. It is concluded that simulation of diffusion in or through polymers is not limited to worst-case assumptions but could also be applied to real cases for risk assessment, designing packaging with low leaching risk or to synthesize plastic additives with low diffusion rates.

Baseline aquatic contamination and endocrine status in a resident fish of Biscayne National Park

Surface water, sediment, and fish from Biscayne Bay, coastal wetlands adjacent to the Bay, and canals discharging into the Bay were sampled for determination of baseline contamination in Biscayne National Park. While the number of contaminants detected in canal waters was greater during the wet season than the dry season, no seasonal difference was evident for Biscayne Bay or coastal wetland waters. Estrogen equivalency (as 17β-estradiol equivalents), as predicted by the Yeast Estrogen Screen, for extracts of passive water samplers deployed in canals and wetlands was elevated during the wet relative to the dry season. Generally, contamination in water, sediments, and fish was greater in the canals than in Biscayne Bay and the wetlands. Guideline levels for sediment contaminant were exceeded most frequently in canals relative to the coastal wetlands and the Bay. Further investigation is necessary to better understand the impact of contaminants in Biscayne National Park.

Controlled biodegradation of polymers using nanoparticles and its application

Controlled biodegradation mechanism has been revealed using different nanoparticles which eventually regulate pH of media.

Green and biodegradable composite films with novel antimicrobial performance based on cellulose

In order to obtain a safe and biodegradable material with antimicrobial properties from cellulose for food packaging, we presented a facile way to graft chitosan onto the oxidized cellulose films. The obtained films had a high transparent property of above 80% transmittance, excellent barrier properties against oxygen and antimicrobial properties against Escherichia coli and Staphylococcus aureus. The antimicrobial properties, mechanical properties, and water vapor permeability of composites are essential characteristics in determining their applicability as food-packaging materials. Moreover, using a sausage model, it was shown that the composites exhibited better performance than traditional polyethylene packaging material and demonstrated good potential as food packaging materials. The results presented a new insight into the development of green materials for food packaging.

The adverse effect of 4-tert-octylphenol on fat metabolism in pregnant rats via regulation of lipogenic proteins

Alkylphenols such as 4-tert-octylphenol (OP), nonylphenol, and bisphenol A are classified as endocrine-disrupting chemicals (EDCs). Digestion and metabolism of food are controlled by many endocrine factors, including insulin, glucagon, and estrogen. These factors are differentially regulated during pregnancy. The alteration of nutritional intake and fat metabolism may affect the maintenance of pregnancy and supplementation of nutrients to the fetus, and therefore can cause severe metabolic diseases such as ketosis, marasmus and diabetes mellitus in pregnant individuals. In this study, we examined the effects of OP on fat metabolism in pregnant rats. Ethinyl estradiol (EE) was also administered as an estrogenic positive control. In our results, rats treated with OP showed significantly reduced body weights compared to the control group. In addition, histological analysis showed that the amount of fat deposited in adipocytes was reduced by OP treatment. To study the mechanism of action of OP in fat metabolism, we examined the expression levels of fat metabolism-associated genes in rat adipose tissue and liver by real-time PCR. OP and EE negatively regulated the expression of lipogenic enzymes, including FAS (fatty acid synthase), ACC-1 (acetyl-CoA carboxylase-1), and SCD-1 (stearoyl-CoA desaturase-1). The levels of lipogenic enzyme-associated transcription factors such as C/EBP-α (CAAT enhancer binding protein alpha) and SREBP-1c (sterol regulatory element binding protein-1c) were also reduced in both liver and adipose tissue. In summary, these findings suggest that OP has adverse effects on fat metabolism in pregnant rats and inhibits fat deposition via regulating lipogenic genes in the liver and adipose tissue. The altered fat metabolism by OP may affect the nutrition balance during pregnancy and can cause metabolism-related diseases.

Why endocrine disrupting chemicals (EDCs) challenge traditional risk assessment and how to respond

Endocrine disrupting compounds (EDCs) are a diverse group of "chemicals of emerging concern" which have attracted much interest from the research community since the 1990s. Today there is still no definitive risk assessment tool for EDCs. While some decision making organizations have attempted to design methodology guidelines to evaluate the potential risk from this broadly defined group of constituents, risk assessors still face many uncertainties and unknowns. Until a risk assessment paradigm is designed specifically for EDCs and is vetted by the field, traditional risk assessment tools may be used with caution to evaluate EDCs. In doing so, each issue of contention should be addressed with transparency in order to leverage available information and technology without sacrificing integrity or accuracy. The challenges that EDCs pose to traditional risk assessment are described in this article to assist in this process.