Impact of collagen crosslinking on the second harmonic generation signal and the fluorescence lifetime of collagen autofluorescence

Label-Free Assessment of Key Biological Autofluorophores: Material Characteristics and Opportunities for Clinical Applications

Autofluorophores are endogenous fluorescent compounds that naturally occur in the intra and extracellular spaces of all tissues and organs. Most have vital biological functions - like the metabolic cofactors NAD(P)H and FAD+, as well as the structural protein collagen. Others are considered to be waste products - like lipofuscin and advanced glycation end products - which accumulate with age and are associated with cellular dysfunction. Due to their natural fluorescence, these materials have great utility for enabling non-invasive, label-free assays with direct ties to biological function. Numerous technologies, with different advantages and drawbacks, are applied to their assessment, including fluorescence lifetime imaging microscopy, hyperspectral microscopy, and flow cytometry. Here, the applications of label-free autofluorophore assessment are reviewed for clinical and health-research applications, with specific attention to biomaterials, disease detection, surgical guidance, treatment monitoring, and tissue assessment - fields that greatly benefit from non-invasive methodologies capable of continuous, in vivo characterization.

A Glutaraldehyde-Free Crosslinking Method for the Treatment of Collagen-Based Biomaterials for Clinical Application

Biological bioprostheses such as grafts, patches, and heart valves are often derived from biological tissue like the pericardium. These bioprostheses can be of xenogenic, allogeneic, or autologous origin. Irrespective of their origin, all types are pre-treated via crosslinking to render the tissue non-antigenic and mechanically strong or to minimize degradation. The most widely used crosslinking agent is glutaraldehyde. However, glutaraldehyde-treated tissue is prone to calcification, inflammatory degradation, and mechanical injury, and it is incapable of matrix regeneration, leading to structural degeneration over time. In this work, we are investigating an alternative crosslinking method for an intraoperative application. The treated tissue's crosslinking degree was evaluated by differential scanning calorimetry. To confirm the findings, a collagenase assay was conducted. Uniaxial tensile testing was used to assess the tissue's mechanical properties. To support the findings, the treated tissue was visualized using two-photon microscopy. Additionally, fourier transform infrared spectroscopy was performed to study the overall protein secondary structure. Finally, a crosslinking procedure was identified for intraoperative processing. The samples showed a significant increase in thermal and enzymatic stability after treatment compared to the control, with a difference of up to 22.2 °C and 100%, respectively. Also, the tissue showed similar biomechanics to glutaraldehyde-treated tissue, showing greater extensibility, a higher failure strain, and a lower ultimate tensile strength than the control. The significant difference in the structure band ratio after treatment is proof of the introduction of additional crosslinks compared to the untreated control with regard to differences in the amide-I region. The microscopic images support these findings, showing an alteration of the fiber orientation after treatment. For collagen-based biomaterials, such as pericardial tissue, the novel phenolic crosslinking agent proved to be an equivalent alternative to glutaraldehyde regarding tissue characteristics. Although long-term studies must be performed to investigate superiority in terms of longevity and calcification, our novel crosslinking agent can be applied in concentrations of 1.5% or 2.0% for the treatment of biomaterials.

Pan-tissue scaling of stiffness versus fibrillar collagen reflects contractility-driven strain that inhibits fibril degradation

Polymer network properties such as stiffness often exhibit characteristic power laws in polymer density and other parameters. However, it remains unclear whether diverse animal tissues, composed of many distinct polymers, exhibit such scaling. Here, we examined many diverse tissues from adult mouse and embryonic chick to determine if stiffness ( E tissue ) follows a power law in relation to the most abundant animal protein, Collagen-I, even with molecular perturbations. We quantified fibrillar collagen in intact tissue by second harmonic generation (SHG) imaging and from tissue extracts by mass spectrometry (MS), and collagenase-mediated decreases were also tracked. Pan-tissue power laws for tissue stiffness versus Collagen-I levels measured by SHG or MS exhibit sub-linear scaling that aligns with results from cellularized gels of Collagen-I but not acellular gels. Inhibition of cellular myosin-II based contraction fits the scaling, and combination with inhibitors of matrix metalloproteinases (MMPs) show collagenase activity is strain - not stress- suppressed in tissues, consistent with past studies of gels and fibrils. Beating embryonic hearts and tendons, which differ in both collagen levels and stiffness by >1000-fold, similarly suppressed collagenases at physiological strains of ∼5%, with fiber-orientation regulating degradation. Scaling of E tissue based on 'use-it-or-lose-it' kinetics provides insight into scaling of organ size, microgravity effects, and regeneration processes while suggesting contractility-driven therapeutics.

Modulation of the biophysical and biochemical properties of collagen by glycation for tissue engineering applications

The structural and functional properties of collagen are modulated by the presence of intramolecular and intermolecular crosslinks. Advanced Glycation End-products (AGEs) can produce intermolecular crosslinks by bonding the free amino groups of neighbouring proteins. In this research, the following hypothesis is explored: The accumulation of AGEs in collagen decreases its proteolytic degradation rates while increasing its stiffness. Fluorescence Lifetime Imaging (FLIM) and Fourier-transform infrared spectroscopy (FTIR) detect biochemical changes in collagen scaffolds during the glycation process. The accumulation of AGEs increases exponentially in the collagen scaffolds as a function of Methylglyoxal (MGO) concentration by performing autofluorescence measurement and competitive ELISA. Glycated scaffolds absorb water at a much higher rate confirming the direct affinity between AGEs and interstitial water within collagen fibrils. In addition, the topology of collagen fibrils as observed by Atomic Force Microscopy (AFM) is a lot more defined following glycation. The elastic modulus of collagen fibrils decreases as a function of glycation, whereas the elastic modulus of collagen scaffolds increases. Finally, the enzymatic degradation of collagen by bacterial collagenase shows a sigmoidal pattern with a much slower degradation rate in the glycated scaffolds. This study identifies unique variations in the properties of collagen following the accumulation of AGEs. STATEMENT OF SIGNIFICANCE: In humans, Advanced Glycation End-products (AGEs) are naturally produced as a result of aging process. There is an evident lack of knowledge in the basic science literature explaining the biomechanical impact of AGE-mediated crosslinks on the functional and structural properties of collagen at both the nanoscale (single fibrils) and mesoscale (bundles of fibrils). This research, demonstrates how it is possible to harness this natural phenomenon in vitro to enhance the properties of engineered collagen fibrils and scaffolds. This study identifies unique variations in the properties of collagen at nanoscale and mesoscale following accumulation of AGEs. In their approach, they investigate the unique properties conferred to collagen, namely enhanced water sorption, differential elastic modulus, and finally sigmoidal proteolytic degradation behavior.

Two-Photon Imaging for Non-Invasive Corneal Examination

Two-photon imaging (TPI) microscopy, namely, two-photon excited fluorescence (TPEF), fluorescence lifetime imaging (FLIM), and second-harmonic generation (SHG) modalities, has emerged in the past years as a powerful tool for the examination of biological tissues. These modalities rely on different contrast mechanisms and are often used simultaneously to provide complementary information on morphology, metabolism, and structural properties of the imaged tissue. The cornea, being a transparent tissue, rich in collagen and with several cellular layers, is well-suited to be imaged by TPI microscopy. In this review, we discuss the physical principles behind TPI as well as its instrumentation. We also provide an overview of the current advances in TPI instrumentation and image analysis. We describe how TPI can be leveraged to retrieve unique information on the cornea and to complement the information provided by current clinical devices. The present state of corneal TPI is outlined. Finally, we discuss the obstacles that must be overcome and offer perspectives and outlooks to make clinical TPI of the human cornea a reality.

Green autofluorescence of the index fingernails is a novel biomarker for noninvasive determinations on the status of tobacco smoking

It is critical to discover novel biomarkers for tobacco smoking. Our study has indicated the green autofluorescence (AF) of Index Fingernails as a novel biomarker for rapid and noninvasive determinations on the status of tobacco smoking: The green AF intensity of the Index Fingernails of the smokers was remarkably higher than that of the nonsmokers in the natural populations. When the AF intensity of the Fingernails was used as the variable, the area under curve (AUC) for differentiating the smokers from the nonsmokers was 0.91. Similar results were obtained by analyzing the green AF of the Index Fingernails of the healthy populations and the patients of acute ischemic stroke. Collectively, our study has indicated the green AF of the Index Fingernails as a novel biomarker for tobacco smoking, based on which the first method for noninvasive, rapid and economical determinations on the status of tobacco smoking may be established.

Anterior cruciate ligament microfatigue damage detected by collagen autofluorescence in situ

PURPOSE

Certain types of repetitive sub-maximal knee loading cause microfatigue damage in the human anterior cruciate ligament (ACL) that can accumulate to produce macroscopic tissue failure. However, monitoring the progression of that ACL microfatigue damage as a function of loading cycles has not been reported. To explore the fatigue process, a confocal laser endomicroscope (CLEM) was employed to capture sub-micron resolution fluorescence images of the tissue in situ. The goal of this study was to quantify the in situ changes in ACL autofluorescence (AF) signal intensity and collagen microstructure as a function of the number of loading cycles.

METHODS

Three paired and four single cadaveric knees were subjected to a repeated 4 times bodyweight landing maneuver known to strain the ACL. The paired knees were used to compare the development of ACL microfatigue damage on the loaded knee after 100 consecutive loading cycles, relative to the contralateral unloaded control knee, through second harmonic generation (SHG) and AF imaging using confocal microscopy (CM). The four single knees were used for monitoring progressive ACL microfatigue damage development by AF imaging using CLEM.

RESULTS

The loaded knees from each pair exhibited a statistically significant increase in AF signal intensity and decrease in SHG signal intensity as compared to the contralateral control knees. Additionally, the anisotropy of the collagen fibers in the loaded knees increased as indicated by the reduced coherency coefficient. Two out of the four single knee ACLs failed during fatigue loading, and they exhibited an order of magnitude higher increase in autofluorescence intensity per loading cycle as compared to the intact knees. Of the three regions of the ACL - proximal, midsubstance and distal - the proximal region of ACL fibers exhibited the highest AF intensity change and anisotropy of fibers.

CONCLUSIONS

CLEM can capture changes in ACL AF and collagen microstructures in situ during and after microfatigue damage development. Results suggest a large increase in AF may occur in the final few cycles immediately prior to or at failure, representing a greater plastic deformation of the tissue. This reinforces the argument that existing microfatigue damage can accumulate to induce bulk mechanical failure in ACL injuries. The variation in fiber organization changes in the ACL regions with application of load is consistent with the known differences in loading distribution at the ACL femoral enthesis.

The texture of collagen in the microenvironments of Merkel cell carcinoma

ABSTRACT

Solid tumors typically contain high levels of fibrillar collagen. The increased stromal collagen deposition usually promotes cancer progression since biochemical and biophysical cues from tumor-associated collagen fibers stimulate neoplastic cells. Few studies have investigated the relationship between Merkel cell carcinoma (MCC) and the extracellular matrix (ECM), but there are no works evaluating collagen.This is an observational, analytical, retrospective study including 11 patients with MCC. Primary tumor-stained sections were evaluated by second harmonic generation microscopy and texture analysis.Peritumoral texture features (area fraction, mean gray value, entropy, and contrast) showed much lower values than normal skin (P < .0001) revealing extensively altered structure of peritumoral collagen fibers. These differences were not significant between tumors with unfavorable and favorable known prognostic factors.Profound changes in collagen fibers present in the stroma accompanying primary MCC may contribute to the aggressive behavior of this tumor. Our results indicate that whatever MCC histological subtype, size or anatomical location, MCC promotes the same type of ECM for its development. As an outlook, therapies using ECM macromolecules or fibroblasts (the architects of ECM remodeling) as target could be useful in the treatment of MCC.

A Collagen-Conducting Polymer Composite with Enhanced Chondrogenic Potential

Introduction

Conducting polymers (CPs) have demonstrated promise for promoting tissue repair, yet their ability to facilitate cartilage regeneration has yet to be thoroughly investigated. Integrating CPs into common scaffolds for tissue regeneration, such as collagen, would enable mechanistic studies on the potential for CPs to promote cartilage repair. Here, we combine absorbable collagen sponges (ACS) with the CP PEDOT-S and show that the PEDOT-S-collagen composite (PEDOT-ACS) has enhanced chondrogenic potential compared to the collagen sponge alone.

Methods

PEDOT-S was incorporated through a simple incubation process. Changes to scaffold topography, elastic modulus, swelling ratio, and surface charge were measured to analyze how PEDOT-S affected the material properties of the scaffold. Changes in rat bone marrow mesenchymal stem cell (rBMSC) functionality were assessed with cell viability and glycosaminoglycan production assays.

Results

Macrostructure and microstructure of the scaffold remained largely unaffected by PEDOT-S modification, as observed through SEM images and quantification of scaffold porosity. Zeta potential, swelling ratio, and dry elastic modulus of the collagen scaffold were significantly changed by the incorporation of PEDOT-S. Seeding cells on PEDOT-ACS improved cell viability and enhanced glycosaminoglycan production.

Conclusion

We demonstrate a practical approach to generate PEDOT-S composites with comparable physical properties to pristine collagen scaffolds. We show that PEDOT-ACS can influence cell functionality and serve as a promising model system for mechanistic investigations on the roles of bioelectronic signaling in the repair of cartilage and other tissue types.

Application of Temporary, Cell-Containing Alginate Microcarriers to Facilitate the Fabrication of Spatially Defined Cell Pockets in 3D Collagen Hydrogels

Mimicking the complexity of natural tissue is a major challenge in the field of tissue engineering. Here, a facile 2-step fabrication method to prepare 3D constructs with distinct regions of high cell concentrations and without the need for elaborate equipment is proposed. The initial incorporation of cells in a sacrificial alginate matrix allows the addition of other, cell relevant biopolymers, such as, collagen to form a spatially confined, interpenetrating network at the microscale. A layered structure at the macroscale can be achieved by incorporating these cell-containing microspheres in thin collagen layers. Cells are locally released by de-gelling the alginate matrix and their attachment to the collagen hydrogel layers has been studied. The use of the murine pre-osteoblast cell line MC3T3-E1 as an example cell line shows that the cells behave differently in their cell migration pattern based on the initial composition of the alginate microspheres.

Use of confocal microscopy imaging for in vitro assessment of adipose-derived mesenchymal stromal cells seeding on acellular dermal matrices: 3D reconstruction based on collagen autofluorescence

Background

Both mesenchymal stromal cells (MSCs) and acellular dermal matrices (ADMs) represent fascinating therapeutic tools in the wound healing scenario. Strategies aimed at combining these two treatment modalities are currently under investigation. Moreover, scarcity of quantitative, nondestructive techniques for quality assessment of engineered tissues poses great limitations in regenerative medicine and collagen autofluorescence‐based imaging techniques are acquiring great importance in this setting.

Objective

Our goals were to assess the in vitro interactions between ADSCs and ADMs and to analyze extracellular‐matrix production.

Methods

Adipose‐derived MSCs (ADSC) were plated on 8‐mm punch biopsies of a commercially available ADM (Integra®). Conventional histology with hematoxylin‐eosin staining, environmental scanning electron microscopy, and confocal‐laser scanning microscopy were used to obtain imaging of ADSC‐seeded ADMs. Collagen production by ADSCs was quantified by mean fluorescence intensity (MFI), expressed in terms of positive pixels/field, obtained through ImageJ software processing of three‐dimensional projections from confocal scanning images. Control conditions included: fibroblast‐seeded ADM, ADSC‐ and fibroblast‐induced scaffolds, and Integra® alone.

Results

ADSCs were efficiently seeded on Integra® and were perfectly incorporated in the pores of the scaffold. Collagen production was revealed to be significantly higher when ADSCs were seeded on ADM rather than in all other control conditions. Collagen autofluorescence was efficiently used as a surrogate marker of ECM production.

Conclusions

Combined therapies based on MSCs and collagenic ADMs are promising therapeutic options for chronic wounds. Not only ADSCs can be efficiently seeded on ADMs, but ADMs also seem to potentiate their regenerative properties, as highlightable from fluorescence confocal imaging.

Second harmonic generation light quantifies the ratio of type III to total (I + III) collagen in a bundle of collagen fiber

The ratio of type III to type I collagen is important for properly maintaining functions of organs and cells. We propose a method to quantify the ratio of type III to total (type I + III) collagen (λ_III) in a given collagen fiber bundle using second harmonic generation (SHG) light. First, the relationship between SHG light intensity and the λ_III of collagen gels was examined, and the slope (k₁) and SHG light intensity at 0% type III collagen (k₂) were determined. Second, the SHG light intensity of a 100% type I collagen fiber bundle and its diameter (D) were measured, and the slope (k₃) of the relationship was determined. The λ_III in a collagen fiber bundle was estimated from these constants (k_1-3) and SHG light intensity. We applied this method to collagen fiber bundles isolated from the media and adventitia of porcine thoracic aortas, and obtained λ_III = 84.7% ± 13.8% and λ_III = 17.5% ± 15.2%, respectively. These values concurred with those obtained with a typical quantification method using sodium dodecyl sulfate–polyacrylamide gel electrophoresis. The findings demonstrated that the method proposed is useful to quantify the ratio of type III to total collagen in a collagen fiber bundle.

Examining lysyl oxidase-like modulation of collagen architecture in 3D spheroid models of idiopathic pulmonary fibrosis via second-harmonic generation microscopy

SIGNIFICANCE

Idiopathic pulmonary fibrosis (IPF) patients have a poor prognosis with short lifespan following diagnosis as there are limited effective treatment options. Despite matrix stiffening being the hallmark of the disease there remains a lack of knowledge surrounding the underlying collagen alterations in the disease. Specifically, while increased collagen crosslinking has been implicated, the resulting effects on collagen macro/supramolecular changes have not been explored.

AIM

We sought to determine if second-harmonic generation (SHG) microscopy could characterize differences in the collagen architecture in 3D spheroid models of IPF grown under different crosslinking modulation conditions (promotion and inhibition).

APPROACH

We used SHG metrics based on the fiber morphology, relative SHG brightness, and macro/supramolecular structure by SHG polarization analyses to compare the structure of the IPF spheroids.

RESULTS

Comparison of the fiber morphology of the spheroids showed that the control group had the longest, straightest, and thickest fibers. The spheroids with crosslink enhancement and inhibition had the highest and lowest SHG conversion efficiencies, respectively, consistent with the resulting harmonophore density. SHG polarization analyses showed that the peptide pitch angle, alignment of collagen molecules, and overall chirality were altered upon crosslink modulation and were also consistent with reduced organization relative to the control group.

CONCLUSIONS

While no single SHG signature is associated with crosslinking, we show that the suite of metrics used here is effective in delineating alterations across the collagen architecture sizescales. The results largely mirror those of human tissues and demonstrate that the combination of 3D spheroid models and SHG analysis is a powerful approach for hypothesis testing the roles of operative cellular and molecular factors in IPF.

Mesoscopic fluorescence lifetime imaging: Fundamental principles, clinical applications and future directions

Fluorescence lifetime imaging (FLIm) is an optical spectroscopic imaging technique capable of real-time assessments of tissue properties in clinical settings. Label-free FLIm is sensitive to changes in tissue structure and biochemistry resulting from pathological conditions, thus providing optical contrast to identify and monitor the progression of disease. Technical and methodological advances over the last two decades have enabled the development of FLIm instrumentation for real-time, in situ, mesoscopic imaging compatible with standard clinical workflows. Herein, we review the fundamental working principles of mesoscopic FLIm, discuss the technical characteristics of current clinical FLIm instrumentation, highlight the most commonly used analytical methods to interpret fluorescence lifetime data and discuss the recent applications of FLIm in surgical oncology and cardiovascular diagnostics. Finally, we conclude with an outlook on the future directions of clinical FLIm.

Low-level red plus near infrared lights combination induces expressions of collagen and elastin in human skin in vitro

OBJECTIVE

Light therapy has attracted medical interests as a safe, alternative treatment for photo-ageing and photo-damaged skin. Recent research suggested the therapeutic activity of red and infrared (IR) lights may be effective at much lower energy levels than those used clinically. This study was to evaluate the efficacy of low-level red plus near IR light emitting diode (LED) combination on collagen and elastin and ATP production.

METHODS

Human dermal fibroblasts or skin tissues were irradiated daily by red (640 nm) plus near IR (830 nm) LED lights combination at 0.5 mW/cm² for 10 minutes (0.3 J/cm² ). qPCR, ELISAs or histology were used to determine the gene and protein expressions. Fluorescent measurement was used to assess crosslinks of collagen and elastic fibres. ATP production was evaluated by ATP assay.

RESULTS

Treatment of human fibroblast cell cultures with low-level red plus near IR lights combination was found to significantly increase LOXL1, ELN and COL1A1 and COL3A1 gene expressions as well as the synthesis of the procollagen type I and elastin proteins. Treating human skin explants with low-level red plus near IR lights combination similarly induced significant increases in the same gene expressions, type III collagen and elastic fibre formation and crosslinks. ATP production was increased in human dermal fibroblasts after red plus near IR lights combination treatment.

CONCLUSION

Low-level red plus near IR lights combination stimulated the production of collagen and elastin production associated with anti-ageing benefits. These findings suggest that low-level red plus near IR LED light combination may provide an effective treatment opportunity for people with photo-aged skin.

Superresolved polarization-enhanced second-harmonic generation for direct imaging of nanoscale changes in collagen architecture

Superresolution (SR) optical microscopy has allowed the investigation of many biological structures below the diffraction limit; however, most of the techniques are hampered by the need for fluorescent labels. Nonlinear label-free techniques such as second-harmonic generation (SHG) provide structurally specific contrast without the addition of exogenous labels, allowing observation of unperturbed biological systems. We use the photonic nanojet (PNJ) phenomena to achieve SR-SHG. A resolution of ∼ λ / 6 with respect to the fundamental wavelength, that is, a ∼ 2.3 -fold improvement over conventional or diffraction-limited SHG under the same imaging conditions is achieved. Crucially we find that the polarization properties of excitation are maintained in a PNJ. This is observed in experiment and simulations. This may have widespread implications to increase sensitivity by detection of polarization-resolved SHG by observing anisotropy in signals. These new, to the best of our knowledge, findings allowed us to visualize biological SHG-active structures such as collagen at an unprecedented and previously unresolvable spatial scale. Moreover, we demonstrate that the use of an array of self-assembled high-index spheres overcomes the issue of a limited field of view for such a method, allowing PNJ-assisted SR-SHG to be used over a large area. Dysregulation of collagen at the nanoscale occurs in many diseases and is an underlying cause in diseases such as lung fibrosis. Here we demonstrate that pSR-SHG allows unprecedented observation of changes at the nanoscale that are invisible by conventional diffraction-limited SHG imaging. The ability to nondestructively image SHG-active biological structures without labels at the nanoscale with a relatively simple optical method heralds the promise of a new tool to understand biological phenomena and drive drug discovery.

Evaluation of an electrochemically aligned collagen yarn for textile scaffold fabrication

Collagen is the major component of the extracellular matrix in human tissues and widely used in the fabrication of tissue engineered scaffolds for medical applications. However, these forms of collagen gels and films have limitations due to their inferior strength and mechanical performance and their relatively fast rate of degradation. A new form of continuous collagen yarn has recently been developed for potential usage in fabricating textile tissue engineering scaffolds. In this study, we prepared the continuous electrochemical aligned collagen yarns from acid-soluble collagen that was extracted from rat tail tendons (RTTs) using 0.25 M acetic acid. Sodium dodecyl sulfate polyacrylamide gel electrophoresis and Fourier transform infrared spectroscopy confirmed that the major component of the extracted collagen contained alpha 1 and alpha 2 chains and the triple helix structure of Type 1 collagen. The collagen solution was processed to monofilament yarns in continuous lengths by using a rotating electrode electrochemical compaction device. Exposing the non-crosslinked collagen yarns and the collagen yarns crosslinked with 1-ethyl-3-(-3-dimethyl-aminopropyl) carbodiimide hydrochloride to normal physiological hydrolytic degradation conditions showed that both yarns were able to maintain their tensile strength during the first 6 weeks of the study. Cardiosphere-derived cells showed significantly enhanced attachment and proliferation on the collagen yarns compared to synthetic polylactic acid filaments. Moreover, the cells were fully spread and covered the surface of the collagen yarns, which confirmed the superiority of collagen in terms of promoting cellular adhesion. The results of this work indicated that the aligned RTT collagen yarns are favorable for fabricating biotextile scaffolds and are encouraging for further studies of various textile structure for different tissue engineering applications.

Measuring collagen fibril diameter with differential interference contrast microscopy

Collagen fibrils, linear arrangements of collagen monomers, 20-500 nm in diameter, comprising hundreds of molecules in their cross-section, are the fundamental structural unit in a variety of load-bearing tissues such as tendons, ligaments, skin, cornea, and bone. These fibrils often assemble into more complex structures, providing mechanical stability, strength, or toughness to the host tissue. Unfortunately, there is little information available on individual fibril dynamics, mechanics, growth, aggregation and remodeling because they are difficult to image using visible light as a probe. The principle quantity of interest is the fibril diameter, which is difficult to extract accurately, dynamically, in situ and non-destructively. An optical method, differential interference contrast (DIC) microscopy has been used to visualize dynamic structures that are as small as microtubules (25 nm diameter) and has been shown to be sensitive to the size of objects smaller than the wavelength of light. In this investigation, we take advantage of DIC microscopy's ability to report dimensions of nanometer scale objects to generate a curve that relates collagen diameter to DIC edge intensity shift (DIC-EIS). We further calibrate the curve using electron microscopy and demonstrate a linear correlation between fibril diameter and the DIC-EIS. Using a non-oil immersion, 40x objective (NA 0.6), collagen fibril diameters between ~100 nm to ~ 300 nm could be obtained with ±11 and ±4 nm accuracy for dehydrated and hydrated fibrils, respectively. This simple, nondestructive, label free method should advance our ability to directly examine fibril dynamics under experimental conditions that are physiologically relevant.

Noise reduction and quantification of fiber orientations in greyscale images

Quantification of the angular orientation distribution of fibrous tissue structures in scientific images benefits from the Fourier image analysis to obtain quantitative information. Measurement uncertainties represent a major challenge and need to be considered by propagating them in order to determine an adaptive anisotropic Fourier filter. Our adaptive filter method (AF) is based on the maximum relative uncertainty δcut of the power spectrum as well as a weighted radial sum with weighting factor α. We use a Monte-Carlo simulation to obtain realistic greyscale images that include defined variations in fiber thickness, length, and angular dispersion as well as variations in noise. From this simulation the best agreement between predefined and derived angular orientation distribution is found for evaluation parameters δcut = 2.1% and α = 1.5. The resulting cumulative orientation distribution was modeled by a sigmoid function to obtain the mean angle and the fiber dispersion. A comparison to a state-of-the-art band-pass method revealed that the AF method is more suitable for the application on greyscale fiber images, since the error of the fiber dispersion significantly decreased from (33.9 ± 26.5)% to (13.2 ± 12.7)%. Both methods were found to accurately quantify the mean fiber orientation with an error of (1.9 ± 1.5)° and (2.3 ± 2.1)° in case of the AF and the band-pass method, respectively. We demonstrate that the AF method is able to accurately quantify the fiber orientation distribution in in vivo second-harmonic generation images of dermal collagen with a mean fiber orientation error of (6.0 ± 4.0)° and a dispersion error of (9.3 ± 12.1)%.

Early evaluation of corneal collagen crosslinking in ex-vivo human corneas using two-photon imaging

The clinical outcome of corneal collagen crosslinking (CXL) is typically evaluated several weeks after treatment. An earlier assessment of its outcome could lead to an optimization of the treatment, including an immediate re-intervention in case of failure, thereby, avoiding additional discomfort and pain to the patient. In this study, we propose two-photon imaging (TPI) as an earlier evaluation method. CXL was performed in human corneas by application of riboflavin followed by UVA irradiation. Autofluorescence (AF) intensity and lifetime images were acquired using a commercial clinically certified multiphoton tomograph prior to CXL and after 2h, 24h, 72h, and 144h storage in culture medium. The first monitoring point was determined as the minimum time required for riboflavin clearance from the cornea. As control, untreated samples and samples treated only with riboflavin (without UVA irradiation) were monitored at the same time points. Significant increases in the stroma AF intensity and lifetime were observed as soon as 2h after treatment. A depth-dependent TPI analysis showed higher AF lifetimes anteriorly corresponding to areas were CXL was most effective. No alterations were observed in the control groups. Using TPI, the outcome of CXL can be assessed non-invasively and label-free much sooner than with conventional clinical devices.

Label-Free Assessment of Collagenase Digestion on Bovine Pericardium Properties by Fluorescence Lifetime Imaging

The extracellular matrix architecture of bovine pericardium (BP) has distinct biochemical and biomechanical properties that make it a useful biomaterial in the field of regenerative medicine. Collagen represents the dominant structural protein of BP and is therefore intimately associated with the properties of this biomaterial. Enzymatic degradation of collagen molecules is critical for extracellular matrix turnover, remodeling and ultimately tissue regeneration. We present a quantitative, label-free and non-destructive method for monitoring changes in biochemical and biomechanical properties of BP during tissue degradation, based on multi-spectral fluorescence lifetime imaging (ms-FLIm). Strong correlations of fluorescence intensity ratio and average fluorescence lifetime were identified with collagen content, Young's Modulus and Ultimate tensile strength during collagenase degradation, indicating the potential of optically monitoring collagen degradation using ms-FLIm. The obtained results demonstrate the value of ms-FLIm to assess the quality of biomaterials in situ for applications in regenerative medicine.

Nondestructive assessment of collagen hydrogel cross-linking using time-resolved autofluorescence imaging

We investigate the use of a fiber-based, multispectral fluorescence lifetime imaging (FLIm) system to nondestructively monitor changes in mechanical properties of collagen hydrogels caused by controlled application of widely used cross-linking agents, glutaraldehyde (GTA) and ribose. Postcross-linking, fluorescence lifetime images are acquired prior to the hydrogels being processed by rheological or tensile testing to directly probe gel mechanical properties. To preserve the sterility of the ribose-treated gels, FLIm is performed inside a biosafety cabinet (BSC). A pairwise correlation analysis is used to quantify the relationship between mean hydrogel fluorescence lifetimes and the storage or Young's moduli of the gels. In the GTA study, we observe strong and specific correlations between fluorescence lifetime and the storage and Young's moduli. Similar correlations are not observed in the ribose study and we postulate a reason for this. Finally, we demonstrate the ability of FLIm to longitudinally monitor dynamic cross-link formation. The strength of the GTA correlations and deployment of our fiber-based FLIm system inside the aseptic environment of a BSC suggests that this technique may be a valuable tool for the tissue engineering community where longitudinal assessment of tissue construct maturation in vitro is highly desirable.

Hypoxia Inducible Factors Modify Collagen I Fibers in MDA-MB-231 Triple Negative Breast Cancer Xenografts

Hypoxia inducible factors (HIFs) are transcription factors that mediate the response of cells to hypoxia. HIFs have wide-ranging effects on metabolism, the tumor microenvironment (TME) and the extracellular matrix (ECM). Here we investigated the silencing effects of two of the three known isoforms, HIF-1α and HIF-2α, on collagen 1 (Col1) fibers, which form a major component of the ECM of tumors. Using a loss-of-function approach for HIF-1α or 2α or both HIF-1α and 2α, we identified a relationship between HIFs and Col1 fibers in MDA-MB-231 tumors. Tumors derived from MDA-MB-231 cells with HIF-1α or 2α or both HIF-1α and 2α silenced contained higher percent fiber volume and lower inter-fiber distance compared to tumors derived from empty vector MDA-MB-231 cells. Depending upon the type of silencing, we observed changes in Col1 degrading enzymes, and enzymes involved in Col1 synthesis and deposition. Additionally, a reduction in lysyl oxidase protein expression in HIF-down-regulated tumors suggests that more non-cross-linked fibers were present. Collectively these results identify the role of HIFs in modifying the ECM and the TME and provide new insights into the effects of hypoxia on the tumor ECM.

Imaging Collagen in Scar Tissue: Developments in Second Harmonic Generation Microscopy for Biomedical Applications

The ability to respond to injury with tissue repair is a fundamental property of all multicellular organisms. The extracellular matrix (ECM), composed of fibrillar collagens as well as a number of other components is dis-regulated during repair in many organs. In many tissues, scaring results when the balance is lost between ECM synthesis and degradation. Investigating what disrupts this balance and what effect this can have on tissue function remains an active area of research. Recent advances in the imaging of fibrillar collagen using second harmonic generation (SHG) imaging have proven useful in enhancing our understanding of the supramolecular changes that occur during scar formation and disease progression. Here, we review the physical properties of SHG, and the current nonlinear optical microscopy imaging (NLOM) systems that are used for SHG imaging. We provide an extensive review of studies that have used SHG in skin, lung, cardiovascular, tendon and ligaments, and eye tissue to understand alterations in fibrillar collagens in scar tissue. Lastly, we review the current methods of image analysis that are used to extract important information about the role of fibrillar collagens in scar formation.

Imaging the Nonlinear Susceptibility Tensor of Collagen by Nonlinear Optical Stokes Ellipsometry

Nonlinear optical Stokes ellipsometric (NOSE) microscopy was demonstrated for the analysis of collagen-rich biological tissues. NOSE is based on polarization-dependent second harmonic generation imaging. NOSE was used to access the molecular-level distribution of collagen fibril orientation relative to the local fiber axis at every position within the field of view. Fibril tilt-angle distribution was investigated by combining the NOSE measurements with ab initio calculations of the predicted molecular nonlinear optical response of a single collagen triple helix. The results were compared with results obtained previously by scanning electron microscopy, nuclear magnetic resonance imaging, and electron tomography. These results were enabled by first measuring the laboratory-frame Jones nonlinear susceptibility tensor, then extending to the local-frame tensor through pixel-by-pixel corrections based on local orientation.

Liquid chromatography-electrospray ionization mass spectrometry for the simultaneous quantitation of collagen and elastin crosslinks

We have developed a novel chromatographic analytical method for the simultaneous quantitation of collagen crosslinks. Seven non-derivatised crosslinks could be separated on a Cogent Diamond Hydride HPLC column using either isocratic or gradient conditions then detected by mass spectrometry. The total run time was less than 10min which is significantly shorter than that previously reported. This is the first method in which histidinohydroxylysinonorleucine (HHL) and histidinohydroxymero-desmosine (HHMD) were separated and identified by mass spectrometry without the need for pre- or post-column derivatization. The CVs of the retention times of all seven crosslinks were less than 1% and the limit of detection (LOD) and the limits of quantitation (LOQ) were 0.07-0.13pmol/μL and 0.20-0.38pmol/μL, respectively. This novel method was used for the routine analysis and quantitation of crosslinks in different animal skins in which potential new collagen crosslinks were identified that are as yet undocumented.

Optical metrics of the extracellular matrix predict compositional and mechanical changes after myocardial infarction

Understanding the organization and mechanical function of the extracellular matrix (ECM) is critical for the development of therapeutic strategies that regulate wound healing following disease or injury. However, these relationships are challenging to elucidate during remodeling following myocardial infarction (MI) due to rapid changes in cellularity and an inability to characterize both ECM microstructure and function non-destructively. In this study, we overcome those challenges through whole organ decellularization and non-linear optical microscopy to directly relate the microstructure and mechanical properties of myocardial ECM. We non-destructively quantify collagen organization, content, and cross-linking within decellularized healthy and infarcted myocardium using second harmonic generation (SHG) and two photon excited autofluorescence. Tensile mechanical testing and compositional analysis reveal that the cumulative SHG intensity within each image volume and the average collagen autofluorescence are significantly correlated with collagen content and elastic modulus of the ECM, respectively. Compared to healthy ECM, infarcted tissues demonstrate a significant increase in collagen content and fiber alignment, and a decrease in cross-linking and elastic modulus. These findings indicate that cross-linking plays a key role in stiffness at the collagen fiber level following infarction, and highlight how this non-destructive approach to assessing remodeling can be used to understand ECM structure-function relationships.

Collagen-collagen interactions mediated by plant-derived proanthocyanidins: A spectroscopic and atomic force microscopy study

Collagen cross-linkings are determinant of biological tissue stability and function. Plant-derived proanthocyanidins (PACs) mimic different hierarchical levels of collagen cross-links by non-enzymatic interactions resulting in the enhancement to the biomechanics and biostability of collagen-rich tissues such as dentin. This study investigated the interaction of PACs from Vitis vinifera grape seed extract with type I collagen in solubilized form and in the demineralized dentin matrix (DDM) by fluorescence spectral analysis; collagen-collagen binding forces in presence of cross-linking solutions by atomic force microscopy (AFM); and spectroscopic analysis of the DDM using attenuated total reflectance Fourier transform-infrared spectroscopy (ATR-FTIR). Glutaraldehyde (GA) and carbodiimide hydrochloride (EDC) with known cross-linking mechanisms were selected for comparative analyses. Changes in fluorescence upon interaction of solubilized type I collagen with PACs, EDC and GA reflected pronounced modifications in collagen conformation. PACs also promoted stronger collagen-collagen fibrils interaction than EDC and GA. A new feature was observed using ATR-FTIR spectroscopic analysis in PACs-treated collagen and DDM. The findings suggest covalent interactions between collagen and PACs. The mechanisms of interaction between PACs-collagen hold attractive and promising tissue-tailored biomedical applications and the binding forces that potentially drive such interaction were characterized.

STATEMENT OF SIGNIFICANCE

Connective tissues such as skin, bone and dentin are mainly composed of type I collagen, which is cross-linked to promote tissue stability, strength and function. Novel therapies using substances that mimic cross-links have been proposed to promote repair of collagen-based-tissues. In dentistry, naturally occurring proanthocyanidins (PACs) have the potential to enhance dentin mechanical properties and reduce its enzymatic degradation, but their mechanisms of cross-linking are unclear. The present study investigated the specific interactions between PACs-type I collagen in purified and dentin collagen and compared to the well described cross-linking mechanisms promoted by synthetic chemical substances. Findings reveal that covalent-like bonds are induced by plant PACs in type I collagen as well as in complex dental native tissue, promoting strong collagen-collagen interactions.

Quantitative analysis of 3D extracellular matrix remodelling by pancreatic stellate cells

Extracellular matrix (ECM) remodelling is integral to numerous physiological and pathological processes in biology, such as embryogenesis, wound healing, fibrosis and cancer. Until recently, most cellular studies have been conducted on 2D environments where mechanical cues significantly differ from physiologically relevant 3D environments, impacting cellular behaviour and masking the interpretation of cellular function in health and disease. We present an integrated methodology where cell-ECM interactions can be investigated in 3D environments via ECM remodelling. Monitoring and quantification of collagen-I structure in remodelled matrices, through designated algorithms, show that 3D matrices can be used to correlate remodelling with increased ECM stiffness observed in fibrosis. Pancreatic stellate cells (PSCs) are the key effectors of the stromal fibrosis associated to pancreatic cancer. We use PSCs to implement our methodology and demonstrate that PSC matrix remodelling capabilities depend on their contractile machinery and β1 integrin-mediated cell-ECM attachment.

Improved secondary caries resistance via augmented pressure displacement of antibacterial adhesive

The present in vitro study evaluated the secondary caries resistance potential of acid-etched human coronal dentin bonded using augmented pressure adhesive displacement in conjunction with an experimental antibacterial adhesive. One hundred and twenty class I cavities were restored with a commercial non-antibacterial etch-and-rinse adhesive (N) or an experimental antibacterial adhesive (A) which was displaced by gentle air-blow (G) or augmented pressure air-blow (H). After bonding and restoration with resin composite, the resulted 4 groups (N-G, N-H, A-G and A-H) were exposed to Streptococcus mutans biofilm for 4, 8, 15, 20 or 25 days. The development of secondary caries in the bonding interface was then examined by confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). Data acquired from 15, 20 and 25 days of artificial caries induction were analyzed with three-way ANOVA at α = 0.05. The depth of the artificial carious lesions was significantly affected by “adhesive type” (Single Bond 2 vs experimental antibacterial adhesive p = 0.003), “intensity of adhesive displacement” (gentle vs augmented-pressure adhesive displacement; p < 0.001), as well as “artificial caries induction time” (p < 0.001). The combined use of augmented pressure adhesive displacement and experimental antibacterial adhesive reduces the progression of secondary caries.

Imaging Fibrosis and Separating Collagens using Second Harmonic Generation and Phasor Approach to Fluorescence Lifetime Imaging

In this paper we have used second harmonic generation (SHG) and phasor approach to auto fluorescence lifetime imaging (FLIM) to obtain fingerprints of different collagens and then used these fingerprints to observe bone marrow fibrosis in the mouse femur. This is a label free approach towards fast automatable detection of fibrosis in tissue samples. FLIM has previously been used as a method of contrast in different tissues and in this paper phasor approach to FLIM is used to separate collagen I from collagen III, the markers of fibrosis, the largest groups of disorders that are often without any effective therapy. Often characterized by an increase in collagen content of the corresponding tissue, the samples are usually visualized by histochemical staining, which is pathologist dependent and cannot be automated.

Changes of skin collagen orientation associated with chronological aging as probed by polarized-FTIR micro-imaging

During chronological skin aging, alterations in dermal structural proteins cause morphological modifications. Modifications are probably due to collagen fiber (type I collagen) rearrangement and reorientation with aging that have not been researched until now. FTIR microspectroscopy appears as an interesting method to study protein structure under normal and pathological conditions. Associated with a polarizer, this vibrational technique permits us to probe collagen orientation within skin tissue sections, by computing the ratio of integrated intensities of amide I and amide II bands. In this study, we used the polarized-FTIR imaging to evaluate molecular modifications of dermal collagen during chronological aging. The data processing of polarized infrared data revealed that type I collagen fibers become parallel to the skin surface in aged skin dermis. Our approach could find innovative applications in dermatology as well as in cosmetics.

Application of time-resolved autofluorescence to label-free in vivo optical mapping of changes in tissue matrix and metabolism associated with myocardial infarction and heart failure

We investigate the potential of an instrument combining time-resolved spectrofluorometry and diffuse reflectance spectroscopy to measure structural and metabolic changes in cardiac tissue in vivo in a 16 week post-myocardial infarction heart failure model in rats. In the scar region, we observed changes in the fluorescence signal that can be explained by increased collagen content, which is in good agreement with histology. In areas remote from the scar tissue, we measured changes in the fluorescence signal (p < 0.001) that cannot be explained by differences in collagen content and we attribute this to altered metabolism within the myocardium. A linear discriminant analysis algorithm was applied to the measurements to predict the tissue disease state. When we combine all measurements, our results reveal high diagnostic accuracy in the infarcted area (100%) and border zone (94.44%) as well as in remote regions from the scar (> 77%). Overall, our results demonstrate the potential of our instrument to characterize structural and metabolic changes in a failing heart in vivo without using exogenous labels.

Multimodal optical characterisation of collagen photodegradation by femtosecond infrared laser ablation

Collagen is a structural component of the human body, as a connective tissue it can become altered as a result of pathophysiological conditions. Although the collagen degradation mechanism is not fully understood, it plays an important role in ageing, disease progression and applications in therapeutic laser treatments. To fully understand the mechanism of collagen alteration, in our study photo-disruptive effects were induced in collagen I matrix by point-irradiation with a femtosecond Ti-sapphire laser under controlled laser ablation settings. This was followed by multi-modal imaging of the irradiated and surrounding areas to analyse the degradation mechanism. Our multi-modal methodology was based on second harmonic generation (SHG), scanning electron microscope (SEM), autofluorescence (AF) average intensities and the average fluorescence lifetime. This allowed us to quantitatively characterise the degraded area into four distinct zones: (1) depolymerised zone in the laser focal spot as indicated by the loss of SHG signal, (2) enhanced crosslinking zone in the inner boundary of the laser induced cavity as represented by the high fluorescence ring, (3) reduced crosslinking zone formed the outer boundary of the cavity as marked by the increased SHG signal and (4) native collagen. These identified distinct zones were in good agreement with the expected photochemical changes shown using Raman spectroscopy. In addition, imaging using polarisation-resolved SHG (p-SHG) revealed both a high degree of fibre re-orientation and a SHG change in tensor ratios around the irradiation spot. Our multi-modal optical imaging approach can provide a new methodology for defining distinct zones that can be used in a clinical setting to determine suitable thresholds for applying safe laser treatments without affecting the surrounding tissues. Furthermore this technique can be extended to address challenges observed in collagen based tissue engineering and used as a minimally invasive diagnostic tool to characterise diseased and non-diseased collagen rich tissues.

Acute UVB-induced epidermal changes assessed by multiphoton laser tomography

BACKGROUND

In vivo multiphoton tomography (MPT) of human skin has become a valuable tool for non-invasive examination of morphological and biophysical skin properties and their alterations. So far, skin changes after UVB irradiation were mainly evaluated clinically and histologically. The present study aimed at non-invasive imaging of histological changes during acute UVB irradiation by multiphoton laser tomography.

METHODS

In 10 volunteers, five areas were irradiated once with an erythematous UVB dose. Multiphoton measurements were performed four times, i.e. before irradiation (baseline), and 24, 48 and 72 h after irradiation, respectively. The data were evaluated for changes of epidermal pleomorphy, spongiosis, pigmentation and thickness.

RESULTS

The four parameters were altered significantly by acute UVB irradiation, i.e. epidermal pleomorphy, spongiosis, pigmentation and thickness increased within 72 h after irradiation.

CONCLUSION

Thus, the study has shown that typical epidermal changes induced by acute UVB irradiation can be evaluated by MPT.

Micromechanical response of articular cartilage to tensile load measured using nonlinear microscopy

Articular cartilage (AC) is a highly anisotropic biomaterial, and its complex mechanical properties have been a topic of intense investigation for over 60 years. Recent advances in the field of nonlinear optics allow the individual constituents of AC to be imaged in living tissue without the need for exogenous contrast agents. Combining mechanical testing with nonlinear microscopy provides a wealth of information about microscopic responses to load. This work investigates the inhomogeneous distribution of strain in loaded AC by tracking the movement and morphological changes of individual chondrocytes using point pattern matching and Bayesian modeling. This information can be used to inform models of mechanotransduction and pathogenesis, and is readily extendable to various other connective tissues.

Lysyl oxidase-mediated collagen crosslinks may be assessed as markers of functional properties of tendon tissue formation

Mechanical property elaboration of engineered tissues is often assumed on the basis of gene and protein characterizations, rather than mechanical testing. However, we recently demonstrated that mechanical properties are not consistently correlated with matrix content and organization during embryonic tissue development. Based on this, mechanical properties should be assessed independently during natural or engineered tissue formation. Unfortunately, mechanical testing is destructive, and thus alternative means of assessing these properties are desirable. In this study, we examined lysyl oxidase (LOX)-mediated crosslinks as markers for mechanical properties during embryonic tendon formation and the potential to detect them non-destructively. We used tandem mass spectrometry (LC-MS/MS) to quantify changes in hydroxylysyl pyridinoline (HP) and lysyl pyridinoline (LP) crosslink density in embryonic chick tendon as a function of developmental stage. In addition, we assessed a multiphoton imaging approach that exploits the natural fluorescence of HP and LP. With both techniques, we quantified crosslink density in normal and LOX-inhibited tendons, and correlated measurements with mechanical properties. HP and LP crosslink density varied as a function of developmental stage, with HP-to-dry mass ratio correlating highly to elastic modulus, even when enzymatic crosslink formation was inhibited. Multiphoton optical imaging corroborated LC-MS/MS data, identifying significant reductions in crosslink density from LOX inhibition. Taken together, crosslink density may be useful as a marker of tissue mechanical properties that could be assessed with imaging non-destructively and perhaps non-invasively. These outcomes could have significant scientific and clinical implications, enabling continuous and long-term monitoring of mechanical properties of collagen-crosslinked tissues or engineered constructs.

Application of Multiphoton Microscopy in Dermatological Studies: a Mini-Review

This review summarizes the historical and more recent developments of multiphoton microscopy, as applied to dermatology. Multiphoton microscopy offers several advantages over competing microscopy techniques: there is an inherent axial sectioning, penetration depths that compete well with confocal microscopy on account of the use of near-infrared light, and many two-photon contrast mechanisms, such as second-harmonic generation, have no analogue in one-photon microscopy. While the penetration depths of photons into tissue are typically limited on the order of hundreds of microns, this is of less concern in dermatology, as the skin is thin and readily accessible. As a result, multiphoton microscopy in dermatology has generated a great deal of interest, much of which is summarized here. The review covers the interaction of light and tissue, as well as the various considerations that must be made when designing an instrument. The state of multiphoton microscopy in imaging skin cancer and various other diseases is also discussed, along with the investigation of aging and regeneration phenomena, and finally, the use of multiphoton microscopy to analyze the transdermal transport of drugs, cosmetics and other agents is summarized. The review concludes with a look at potential future research directions, especially those that are necessary to push these techniques into widespread clinical acceptance.

The matricellular protein periostin contributes to proper collagen function and is downregulated during skin aging

BACKGROUND

Periostin is a secreted 90kDa matricellular protein, which is predominantly expressed in collagen-rich tissues. Collagen is the most abundant protein in mammals and has great tensile strength. Recent investigations have shown that periostin influences collagen fibrillogenesis and biomechanical properties of murine connective tissues.

OBJECTIVE

We investigated the function of periostin concerning collagen homeostasis during intrinsic and extrinsic skin aging. For this purpose, human skin samples of young and old donors as well as samples of photoaged and sun-protected skin areas were analyzed for periostin expression. Using in vitro models, we determined the cell types responsible for periostin expression and performed functional analyses with periostin knockdown cells.

METHODS

TaqMan Real-Time PCR, UV irradiation, knockdown experiments, immunostaining, electron microscopy, collagen degradation assay, collagen crosslink analysis.

RESULTS

Periostin expression is highest in the papillary dermis and downregulated during skin aging. Fibroblasts and non-follicular skin derived precursors were identified as main source for periostin expression in human skin. Periostin knockdown in fibroblasts has no effect on collagen expression, but results in an increased fibril diameter and aberrant collagen structure. This leads to an increased susceptibility of collagen toward proteases, whereas recombinant periostin protects collagen fibrils from degradation.

CONCLUSION

Our data show that periostin plays an important role for proper collagen assembly and homeostasis. During skin aging periostin expression decreases and contributes to the phenotype of aged skin.

Multimodal in vivo imaging of oral cancer using fluorescence lifetime, photoacoustic and ultrasound techniques

This work reports a multimodal system for label-free tissue diagnosis combining fluorescence lifetime imaging (FLIm), ultrasound backscatter microscopy (UBM), and photoacoustic imaging (PAI). This system provides complementary biochemical, structural and functional features allowing for enhanced in vivo detection of oral carcinoma. Results from a hamster oral carcinoma model (normal, precancer and carcinoma) are presented demonstrating the ability of FLIm to delineate biochemical composition at the tissue surface, UBM and related radiofrequency parameters to identify disruptions in the tissue microarchitecture and PAI to map optical absorption associated with specific tissue morphology and physiology.