Missed anatomy: frequency and clinical impact

Is SWEEPS better than PUI in reducing intracanal bacteria and inflammation in cases of apical periodontitis?

To evaluate the efficacy of SWEEPS mode of the Er: YAG laser(SL) and passive ultrasonic irrigation(PUI) in the eradication of microorganisms and in the inflammation detection by IL-1β. Thirty patients with chronic apical periodontitis(AP) were allocated into two groups: Group SL-SWEEPS laser activated irrigation(n = 15) and Group PUI-passive ultrasonic irrigation(n = 15). Bacteriological samples were taken before(S1) and after chemomechanical preparation(S2), and then after final irrigation activation(S3). The levels of total bacteria and Streptococci were measured by means of PCR. Blood samples were collected before and 3rd day after treatment. Enzyme-linked immunosorbent assay was used to measure the levels of IL-1β. The bacterial reduction showed no differences between groups after chemo-mechanical treatment and after irrigant activation(p = 0.590). Post-treatment IL-1β levels were lower than pretreatment levels in both groups(p < 0.001). SL or PUI application in addition to chemomechanical preparation has similar effects on total bacterial level and inflammation detected by IL-1β in patients with AP.

Characterization of the root and canal anatomy of maxillary premolar teeth in an Iraqi subpopulation: a cone beam computed tomography study

This study aims to evaluate the number of roots and root canal morphology types of maxillary premolars in relation to a patient's gender and age in an Iraqi population using two classification systems. Cone beam computed tomography (CBCT) scans of 1116 maxillary premolars from 385 patients were evaluated for the number of roots and root canal morphology types according to Vertucci's classification and Ahmed et al. classification systems. Differences in the number of roots and root canal morphology types with regard to tooth type, patients' gender and age groups were evaluated and the degree of bilateral symmetry was determined. Chi-squared test was used for statistical analysis. About 51.1% of the 1st premolars were double rooted. The majority (87.9%) of the 2nd premolars were single rooted. The three-rooted form presented in only 1.2% and 0.7% of the 1st and 2nd premolars, respectively. Vertucci Type IV (Ahmed et al. code 2MaxP B1P1) and Vertucci Type I (Ahmed et al. code 1MaxP1) were the most common canal morphology types in the 1st and 2nd premolars, respectively. Females showed a lower number of roots and a higher prevalence of Vertucci Type I configuration (P < 0.05). Younger age groups showed a higher prevalence of Vertucci Type I configuration (P < 0.05). Bilateral symmetry was seen in more than half of the maxillary premolars. There is a considerable variation in the number of roots and root canal configurations of maxillary premolars in the studied Iraqi population, with a significant difference by gender and age groups. Ahmed et al. classification provided more accurate presentation of the root and canal anatomy in maxillary premolars compared to Vertucci's classification.

Assessment of the root and canal morphology in the permanent dentition of Saudi Arabian population using cone beam computed and micro-computed tomography - a systematic review

INTRODUCTION

Root canal treatment procedures require a thorough understanding of root and canal anatomy. The purpose of this systematic review was to examine the morphological differences of teeth root and their canals assessed using cone-beam computed and micro-computed tomography in Saudi Arabian population.

METHODOLOGY

An electronic search was conducted in PubMed / Medline, Scopus, Google Scholar, and Web of Science databases until January 2023 to retrieve related studies. "Root canal morphology," "Saudi Arabia," "Micro-CT," and "cone-beam computed tomography" were used as keywords. A modified version of previously published risk of bias assessment tool was used to determine the quality assessment of included studies.

RESULTS

The literature search revealed 47 studies that matched the criteria for inclusion, out of which 44 studies used cone beam computed tomography (CBCT) and three were micro-computed tomography (micro-CT) studies. According to the modified version of risk of bias assessment tool, the studies were categorized as low, moderate, and high risk of bias. A total of 47,612 samples were included which comprised of either maxillary teeth (5,412), or mandibular teeth (20,572), and mixed teeth (21,327). 265 samples were used in micro-CT studies while 47,347 teeth samples were used in CBCT studies. Among the CBCT studies, except for three, all the studies were retrospective studies. Frequently used imaging machine and software were 3D Accuitomo 170 and Morita's i-Dixel 3D imaging software respectively. Minimum and maximum voxel sizes were 75 and 300 μm, Vertucci's classification was mostly used to classify the root canal morphology of the teeth. The included micro-CT studies were in-vitro studies where SkyScan 1172 X-ray scanner was the imaging machine with pixel size ranging between 13.4 and 27.4 μm. Vertucci, Ahmed et al. and Pomeranz et al. classifications were applied to classify the root canal morphology.

CONCLUSION

This systematic review revealed wide variations in root and canal morphology of Saudi population using high resolution imaging techniques. Clinicians should be aware of the common and unusual root and canal anatomy before commencing root canal treatment. Future micro-CT studies are needed to provide additional qualitative and quantitative data presentations.

The Correlation between Intraorifice Distance and the Anatomical Characteristics of the Second Mesiobuccal Canal of Maxillary Molars: A CBCT Study

Introduction

Missing anatomy is one of the main causes of endodontic failures, and accurate knowledge of teeth anatomy is a prerequisite for adequate root canal treatment. The aim of the present cone beam computed tomography (CBCT) study was to describe the anatomical characteristics of the mesiobuccal (MB) root canals of maxillary molars and to understand if a correlation exists between the position of the canal orifices and the anatomical features of the root.

Methods

For the purposes of the study, a total of 100 CBCT scans of maxillary molars with two MB canals were selected and studied. The features of root canal anatomy of the MB root of the same teeth were analyzed and recorded (root length, confluence, and Vertucci classification). The distance between MB1 and MB2 orifices and the palatal orifice were recorded, as well as the distance between the orifices and the line joining the palatal orifice and the others. A statistical analysis was performed by providing descriptive measures, the measure of the correlation between different parameters, and the influence of some of these measures on the presence of a confluence between MB1 and MB2.

Results

It resulted that the most frequent configuration is type II Vertucci. The length measured on the sagittal plane was significantly correlated to the presence of a confluence in the MB root. When the root length was higher than 14.56 mm, the confluence is three times more frequent than when the length is lower (OR = 3.635). The area under the curve (AUC) of the receiver operator characteristic (ROC) curve for length on the sagittal plane was 0.632 (P=0.036).

Conclusions

The presence of a confluence between the MB canals of maxillary molars is correlated to the length of the root that could be measured on the sagittal plane and to the distance between the canal orifices. The relative position of the root canal orifices in relation to anatomic landmarks needs to be further explored.

Endodontic Treatment of a Maxillary First Molar With Two Separate Palatal Roots: A Case Report

Maxillary first molars exhibit considerable anatomical variation, with a single palatal root being the most common occurrence, while two palatal roots are notably less frequent. This case report details the endodontic treatment of a maxillary first molar with two separate palatal roots. It highlights the critical importance of recognizing these anatomical variations and their unique challenges during endodontic procedures. This report emphasizes the essential role of advanced diagnostic methods, such as cone-beam computed tomography, and the use of microscopic techniques in identifying and treating such cases.

Locating and Treating Three Calcified Canals in a Mandibular First Molar With Radix Entomolaris and Five Canals: A Case Report

The success of root canal treatment is highly contingent on the comprehensive shaping, cleaning, and filling of the entire root canal system. Failure to address one or more canals often results in an increased likelihood of post-treatment apical periodontitis. Typically, mandibular first molars feature two roots and three canals, but they may also exhibit anatomical variations, such as a mesial middle canal or radix entomolaris (RE). This article presents a case where three calcified canals in a mandibular first molar with RE and five canals were successfully located and treated.

Evaluation of roots, root canal morphology, and bilateral symmetry of maxillary first molars in a Syrian subpopulation using cone beam computed tomography

OBJECTIVE

Successful endodontic treatments require a comprehensive knowledge of the root canal anatomy, so this study aimed to investigate the number of roots, configurations of root canals, and their bilateral symmetry of maxillary first molars in the Syrian subpopulation, and also the effect of gender on this symmetry.

MATERIALS AND METHODS

The study sample consisted of 250 cone beam computed tomography images (140 for females; and 110 for males), including 500 maxillary first molars. Images were investigated by two endodontists. Root number and canal configuration in each root were recorded, according to Vertucci classification, by studying the image at all levels (axial, coronal, sagittal, oplique, and three-dimensional) to assess the bilateral symmetry and its relation to gender. Statistical analysis was performed with SPSS and the χ2 test was used to compare the bilateral symmetry in males and females.

RESULT

The most common shape of the maxillary first molars was three roots (97.6%). All the roots are symmetrical by 100% in both genders. The root canal configuration was mainly Vertucci type I classification in the distobuccally (73.6%), and palatal root (98%). While the most common types in mesial root were type II (33.3%), this root showed all different types of Vertucci classifications except type VIII, and the proportion of symmetry was (37.2%) without significant difference between the gender (p = .441).

CONCLUSION

Most maxillary first molars in a Syrian population were three-rooted with four root canals (type II), the numbers of roots achieved perfect symmetry 100%, and higher than symmetry ratios in the number of canals and canals configurations (37.2%).

Prevalence of Radix Entomolaris in Mandibular Permanent Molars Analyzed by Cone-Beam CT in the Saudi Population of Ha'il Province

BACKGROUND

The present study aimed to examine the prevalence of radix entomolaris (RE) in the mandibular permanent molar within a specific sub-population in Saudi Arabia.

METHODS

A comprehensive analysis was conducted on 499 cone-beam computed tomography (CBCT) scans of a mandibular molar from a sample of Saudi patients aged between 18 and 65. The primary objective of this study was to investigate the anatomical characteristics of mandibular permanent molars, specifically focusing on the number of roots present. The chi-square test was employed to examine the relationship between various variables.

RESULTS

In the case of mandibular first molars, it was observed that 95.3% of these molars exhibited a bifurcated root structure. In comparison, the remaining 4.7% displayed a triradicular configuration within the sample population under investigation. Although there were some variations, no significant differences in the number of roots were observed between males and females or left and right sides (p > 0.05). In the case of mandibular second molars, it was observed that 96.9% of them exhibited a bifurcated root structure, whereas 2.5% displayed a trifurcated root configuration, and a mere 0.6% possessed a single root. There were no statistically significant variations in the number of roots between males and females or left and right sides (p > 0.05).

CONCLUSIONS

The identification of RE was observed in the mandibular molars. Moreover, the discovered RE roots were predominantly found in the mandibular first molar, displaying a tendency for bilateral occurrence in both male and female individuals.

Successful Root Canal Treatment of an Atypical Mandibular Canine with a Boomerang-shaped Root and Canal System with a Large Periapical lesion-A Case Report with 9-year Follow-up

AIM

This report describes an atypical mandibular canine with a single boomerang-shaped root and root canal system with a large periapical lesion managed by root canal treatment.

METHODS

The chief complaint of a 16-year-old male was acute pain and an abnormal sensation in the right mandibular canine (tooth #27). The clinical examination revealed that tooth #27 had an unusual coronal morphology. The buccal aspect of the tooth resembled that of a normal canine but was significantly broader than expected. On the lingual aspect of the crown; however, there was an unusual cusp-like structure with ridges that was slightly less prominent than the buccal incisal tip. The intraoral periapical radiographs revealed a complex root with an obvious cow horn-shaped canal mesially and distally, but with the suggestion of a root structure joining the mesial and distal extensions. A large periapical lesion was present. Computed tomography revealed the presence of a single root and canal system shaped like a boomerang. Root canal treatment was performed and the patient was followed-up for 9 years.

RESULTS

Following root canal treatment, the patient had no symptoms, no mobility, no periodontal pockets, or root resorption. At 9 years, the cone beam computed tomography images confirmed that satisfactory healing of the periapical tissues had occurred.

CONCLUSION

The mandibular right canine had a unique boomerang-shaped root and canal system. Effective shaping and cleaning of the complex canal shape plus thermoplastic root filling aided the successful healing of the periapical lesion.

Assessment of the Prevalence of Radix Entomolaris and Distolingual Canal in Mandibular First Molars in 15 Countries: A Multinational Cross-sectional Study with Meta-analysis

AIM

The aim of this study was two-folded: i) to assess the prevalence of Distolingual Canal (DLC) and Radix Entomolaris (RE) in Mandibular First Molars (M1Ms), using Cone Beam Computed Tomography (CBCT) images and ii) to assess the impact of sociodemographic factors on the prevalence of these conditions worldwide.

METHODS

CBCT images were scanned retrospectively and the ones including bilateral M1Ms were included in the study. The evaluation was performed by 1 researcher in each country, trained with CBCT technology. A written and video instruction program explaining the protocol to be followed step-by-step was provided to all observers to calibrate them. The CBCT imaging screening procedure consisted of evaluating axial sections from coronal to apical. The presence of DLC and RE in M1Ms (yes/no) was identified and recorded.

RESULTS

Six thousand three hundred four CBCTs, representing 12,608 M1Ms, were evaluated. A significant difference was found between countries regarding the prevalence of both RE and DLC (P < .05). The prevalence of DLC ranged from 3% to 50%, and the overall prevalence was 22% (95% CI: 15%-29%). RE prevalence ranged from 0% to 12%, and the overall prevalence was 3% (95% CI: 2%-5%). There were no significant differences between left and right M1Ms or between genders for either DLC or RE (P > .05).

CONCLUSION

The overall prevalence of RE and DLC in M1Ms was 3% and 22%. Additionally, both RE and DLC showed substantial bilaterally. These variations should be considered by endodontic clinicians during endodontic procedures in order to avoid potential complications.

Deciduous Molars Complexity Anatomy Reveled by Computed Microtomography

OBJECTIVE

 The aim of this study was to analyze the internal morphology of deciduous molars through the use of computed microtomography in a sample from Rio de Janeiro.

MATERIAL AND METHODS

 Thirty maxillary and 30 mandibular deciduous molars (n = 60), divided in first and second primary molars, were scanned by computed microtomography. The teeth were evaluated for root number, root canals, Vertucci classification, root curvature, presence of lateral canals, furcation dentin thickness, structure model index (SMI), volume, and canal surface area.

RESULTS

 The results showed 100% of maxillary molars had three roots and Vertucci type I canal was more prevalent in this group. In the mandibular ones, type IV was more frequent in the mesial root and class I in the distal root and the cavo-interradicular canal occurred in 2 specimens. Dentin thickness in the furcation region measured 1.53 and 1.59 mm in the maxillary and mandibular, respectively. Volume and area parameters varied according to the evaluated canals and SMI demonstrated that all canals had a cylindrical shape.

CONCLUSION

 More detailed information about the internal anatomy of the primary molars has been described, which may help strategies in the preparation of these root canals.

Volume and power of expansion of novel polyurethane-based sealers

INTRODUCTION

Shrinkage and lack of interfacial adaptation between endodontic sealers and root canal walls may jeopardize the root canal treatment outcome. This study aimed to evaluate the volume and power of expansion (and the relationship between the two) of three novel root canal sealers (polyurethane expandable sealer (PES), zeolite + PES (ZPES), and elastomeric polyurethane sealer (EPS)) in comparison with an epoxy-resin based sealer (AH Plus) and a calcium silicate-based sealer (EndoSequence BC).

METHODS

This study utilized 36 cylinders (30 plastic graduated cylinders for volume of expansion and 6 steel cylinders for power of expansion) (4x10mm) filled with PES, ZPES, EPS, AH Plus, EndoSequence BC, or water (n=5/group). The plastic graduated cylinders were inserted inside a customized Linear Swell Meter (LSM) apparatus to measure the percentage of volumetric expansion. The steel cylinders were placed inside an LSM apparatus mounted onto a universal testing machine to measure the maximum pressure in psi. Specimens were tested for 72 hours for both volume and power of expansion tests. Data were analyzed using Kolmogorov-Smirnov, one-way ANOVA, Post Hoc Tukey, and Pearson correlation tests (p<0.05).

RESULTS

The volume of expansion of PES, ZPES, and EPS was significantly higher than in AH Plus and EndoSequence BC (p<0.05). For the power of expansion, no significant differences were found between the root-filling materials (p>0.05). No correlation was seen between the volume and power of expansion (p>0.05).

CONCLUSION

Although polyurethane-based sealers showed a significantly higher volume of expansion compared to AH Plus and EndoSequence BC, their power of expansion did not increase significantly.

A microcomputed tomographic analysis of the morphological variabilities and incidence of extra canals in mandibular first molar teeth in an Egyptian subpopulation

A well-protected microbial habitat may be present in the root and canal morphology, which is varied and complicated. Before initiating effective root canal treatment, a detailed knowledge of the root and canal anatomical variances in each tooth is a must. This study aimed to investigate the root canal configuration, apical constriction anatomy, location of the apical foramen, dentine thickness, and prevalence of accessory canals in mandibular molar teeth in an Egyptian subpopulation using micro-computed tomography (microCT). A total of 96 mandibular first molars were scanned using microCT, and 3D reconstruction was performed using Mimics software. The root canal configurations of each of the mesial and distal root were classified with two different classification systems. The prevalence and dentin thickness around middle mesial and middle distal canals were investigated. The number, location and anatomy of major apical foramina and the apical constriction anatomy analysed. The number and location of accessory canals were identified. Our findings showed that two separate canals (15%) and one single canal (65%) were the most common configuration in the mesial and distal roots, respectively. More than half of the mesial roots had complex canal configurations and 51% had middle mesial canals. The single apical constriction anatomy was the most common for both canals followed by the parallel anatomy. Disto-lingual and distal locations of the apical foramen are the most common location for both roots. Mandibular molars in Egyptians show a wide range of variations in root canal anatomy with high prevalence of middle mesial canals. Clinicians should be aware of such anatomical variations for successful root canal treatment procedures. A specific access refinement protocol and appropriate shaping parameters should be designated for each case to fulfil the mechanical and biological objectives of root canal treatment without compromising the longevity of treated teeth.

Root and canal morphology of mandibular second molars in an Egyptian subpopulation: a cone-beam computed tomography study

BACKGROUND

This study was using Cone beam computed tomography (CBCT) to examine the anatomical variations in mandibular second molars in an Egyptian sub-population.

METHODS

A total of 350 CBCT images (215 females and 135 males, aged 15-65 years) of mandibular second molars were evaluated. Samples were evaluated in terms of: number of roots, number of root canals, roots' cross section as well as prevalence and configurations of C-shaped canals. Statistical analysis was done to highlight differences between different categories and their prevalence among genders (significance level was set at p < 0.05). Data were presented as frequency and percentage values and were analyzed using chi square test followed by pairwise comparisons utilizing multiple Fisher's exact tests with Bonferroni correction. The significance level was set at p < 0.05 within all tests.

RESULTS

Of the 350 mandibular second molars evaluated, 87.2% were non-C-shaped while 12.8% were C-shaped with no gender-based statistically significant differences (χ2 = 0.19, p = 0.656). Most samples had three root canals (80%) followed by two (16%), then one (3.2%), and finally four (0.8%) root canals. Among the non-C-shaped molars, presence of two roots was most common (83.4%) followed by presence of a single root (16.2%), and only one sample (0.2%) had three roots, and this had no correlation with gender (χ2 = 1.86, p = 0.431). In the mesial roots Type IV Vertucci was the most common configuration found (68.8%), while Type I was the most prevalent in the distal roots (91.8%). The long oval configuration was the most commonly found cross section in mesial roots while "oval" was the most prevalent in distal roots.

CONCLUSION

Egyptian sub-population shows highly variable morphological features in mandibular second molars, hence, CBCT is highly recommended on case-to-case conditions.

The morphology of permanent maxillary first molars evaluated by cone-beam computed tomography among a Yemeni population

BACKGROUND

The study's objective was to use CBCT to ascertain the root and root canal anatomy of the permanent maxillary first molars in a Yemeni population. It was considered how gender affected the prevalence of root canal morphology.

METHODS

A sample of 373 CBCT records of maxillary permanent first molars belonging to 373 Yemeni individuals (162 males and 211 females) aged between 12 and 65 years were included in this study. Using CBCT on the teeth, the root form and canal morphology for each root based on Vertucci's classification were evaluated. The distribution of MB2 occurrence was documented. The prevalence and resemblance of the men and females were investigated. The Chi-square test was performed to evaluate the findings.

RESULTS

Of the 373 maxillary first molars studied, the three separated root form was found in 94.9% of the studied MFMs while the two fused and one separate root form was found in 4.5%. The majority of the three-rooted MFMs (82.6%) had more than three root canals (four canals in 77.2% and five canals in 5.4%). The prevalence of MB2 was as high as 82.3% of the three-rooted MFMs. Vertucci type II configuration was the most frequent canal type (25%) followed by Vertucci type III (23.1%) and Vertucci type I (17.7%) in the mesiobuccal root. Vertucci type I was the most prevalent canal configuration in the distobuccal root and palatal root of the three-rooted MFMs (96% and 99.5%, respectively).

CONCLUSIONS

The maxillary first molars' root canal morphology indicated notable variations among a Yemeni population. The maxillary first molars of most of the Yemeni participants in this study had three roots and four canals. In light of the high occurrence of MB2 (82.3%) in permanent maxillary first molars, our findings emphasize the need of searching for and using cutting-edge techniques to locate the MB2 canals. Males outnumbered females in proportion.

Evaluation of Root Canal Morphology of Maxillary Second Premolars and Its Relation to Maxillary Sinus in a Saudi Arabian Population

AIM

This study aimed to evaluate the root canal anatomy of maxillary second premolars, and its relation to the maxillary sinus in a Saudi Arabian population using cone-beam computed tomography.

MATERIALS AND METHODS

Records of 301 patients (602 Teeth) were obtained from a Cone-beam Computed Tomography Database of the College of Dentistry, Jazan University from February 2020 to January 2022. The number of roots, root canals, and the relationship between the root apices of maxillary second premolars and the floor of the maxillary sinuses were studied. The data was recorded, tabulated, and statistically analyzed.

RESULTS

A majority of maxillary second premolars were single-rooted (78.74%), followed by double-rooted (20.76%) and three-rooted (0.5%). Two canals (59.1%) were seen in the majority of the examined teeth, followed by one canal (40.4%) and three canals (0.5%). The roots of the maxillary second premolars were predominantly (69.17%) outside the sinus. Nineteen percent of roots were in contact with the floor of the maxillary sinus with no significant difference between buccal and palatal roots, and around twelve percent (11.73%) of roots were inside the maxillary sinus.

CONCLUSIONS

The root canal system morphology of maxillary second premolars showed a wide range of anatomical variations in the Saudi Arabian population with a predominance of single roots. Most of the roots were located outside the sinus followed by in contact and then inside the sinus. Three-rooted second premolars were exceedingly rare.

CLINICAL SIGNIFICANCE

The cognizance of maxillary second premolar root canal anatomy and its relation to maxillary sinus would be a valuable affirmation for dentists of different nationalities treating the Saudi Arabian population to ensure a successful endodontic treatment.

The morphology of the pulp chamber floor of permanent mandibular first and second molars in an Indian subpopulation-a descriptive cross-sectional study employing Pawar and Singh classification

Background

Mandibular molars are multi-rooted teeth with a complex and strenuous root canal anatomy. Because there is relatively negligible literature describing the pulp chamber floor anatomy, predicting the exact anatomical layout and its variations is daunting. A thorough comprehension and knowledge of the same is required for efficacious endodontic treatment consequence. The purpose of this study was to characterise and ascertain the pulp chamber floor anatomy of permanent mandibular first (ManFMs) and second (ManSMs) molars in an Indian population.

Methods

On 2,134 extracted human mandibular first (ManFMs = 1,067) and second molars (ManSMs = 1,067), a descriptive cross-sectional investigation was executed. Cleaning and removal of hard and soft tissue debris were performed, followed by flattening the anatomical crown until the pupal architecture was uncovered. A stereomicroscope with a magnification of 4.5 magnification was used to investigate the pulpal anatomy. Statistical analysis was carried out using chi square test, with 95% confidence intervals and a p value of 0.05 considered statistically significant.

Results

The majority of the ManFMs showed presence of three canal orifices in 57.73%, followed by four orifices 31.31%, five orifices 8.81%, and six orifices 2.15%. For ManSMs, majorly three orifices were found in 39.83% specimens, followed by two orifices in 37.39%, four orifices in 16.31%, and single root canal orifice was observed in 6.47%. The mesio-buccal, mesio-lingual, disto-buccal, disto-lingual canal orifices exhibited round and oval shapes in both ManFMs and ManSMs. The shape was predominantly oval with a single distal canal orifice (84.25% ManFMs and 74.16% ManSMs). In ManSMs, among the single root canal orifice, 66.66% were round in shape and 33.34% were C-shaped. In ManSMs with two root canal orifices, mesially 79.44% exhibited oval and 20.56% round shape. Distally, 74.16% were oval and 25.84% were round. The shapes of the access cavities for ManFMs were rectangular in 46.67% and triangular in 53.33%. For the ManSMs, the access cavities were triangular in 39.83%, rectangular in 16.31% and non-classified (others) in 43.86% of specimen. In both ManFMs and ManSMs, the pulp chamber floor morphology was predominately Y shaped (57.73% and 39.83%) according to the Pawar and Singh classification© of pulp chamber floor anatomy.

Conclusion

Our study indicated that the orifices on the pulp chamber floor are arranged in a typical manner, supporting the proposed categorization. Furthermore, description of the anatomical patterns of the pulp chamber guides the clinicians in chair-side treatment decisions.

Location angle of second mesio-buccal canal in maxillary molars of an Indian population: an in vivo retrospective CBCT evaluation and proposal of a new classification

Background

The current investigation was designed for predicting the location angle of second mesio-buccal root canal in permanent maxillary (first and second) molars with the aid of proposed measuring points and line using cone beam computed tomography in an Indian population.

Methods

Three-hundred and twenty-four scans of permanent maxillary (first (n = 162) and second (n = 162)) molars with mesio-buccal 2 root canals and unassociated to the current evaluation were acquired. The maxillary molars were viewed with CSI imaging software. The images were captured and were further assessed using 3D Slicer. The assessment included of measuring the distance between the main mesio-buccal and mesio-buccal 2 canal and the angle at which the MB2 it is located utilizing proposed lines joining the disto-buccal and palatal canals. The data was tabulated for the incidence of various angles where the MB2 is located and MB-MB2 distance was determined. The angles denoted were either positive; I (0.1° to 1.9°), II (2° to 4°), III (>4°) or negative I (-0.1° to -1.9°), II (-2° to -4°), III (>-4°). On the data tabulated a new Banga Vhorkate and Pawar's (BVP's) angular classification for maxillary molars was proposed.

Results

The existence of positive angle III was found in 41.35% of maxillary first molars (36 right and 31 left of 162), whereas positive angle II appeared in 41.98% of maxillary second molars (32 right and 36 left of 162). The MB1-MB2 in maxillary 1^st molar is seen to be 3.12-3.31 mm and this distance in maxillary 2^nd molar is 2.8-3.1 mm. The disto-buccal to palatal canal orifice mean distance was 5.06-5.22 mm in maxillary first molars and 4.9-5.8 mm in maxillary second molars.

Conclusion

Accurate diagnosis of the location of second mesio-buccal canal increases the success rate of endodontic treatment and a better prognosis. The new proposed classification may be considerably helpful in the urge to locate the mesio-buccal 2 canal.

Three-dimensional evaluation of root canal morphology of maxillary first premolars: Micro–computed tomographic study

Aim

The aim of this in vitro study was to investigate the root and root canal morphology of maxillary first premolar teeth in a Kuwaiti population using micro–computed tomography (μ- CT).

Materials and methods

A total of 100 maxillary first premolars were scanned in a micro– computed tomographic device. The external anatomy (number of roots, distance from cementoenamel junction to apex, and presence of a palatal groove) and internal anatomy (number of canals and presence of apical deltas, lateral canals, and isthmi) of teeth were analyzed using descriptive analysis.

Results

The number of roots was one root (57 %), two roots (41 %), and three roots (2 %). The longest and shortest roots measured 17.7 and 11.2 mm, respectively. The palatal groove was present in 63.4 % of the teeth. According to Vertucci’s classification, type IV configuration was the most prevalent (53 %), followed by type II. A new root canal configuration type (1–2–1–2–1) was detected. Apical deltas, lateral canals, and isthmi were present in 33 %, 48 %, and 21 % of teeth, respectively.

Conclusion

Type IV canal configuration was the most common root canal configuration. A new root canal configuration type IX for (1–2–1–2–1) was proposed for Kuwaiti population. The μ-CT device could to be a better diagnostic tool for understanding the anatomy of the root canal system.

Root and canal morphology of the maxillary second premolars as indicated by cone beam computed tomography

The aim was to evaluate the morphology of maxillary second premolars. The root canal configurations were classified according to Vertucci and a new system by Ahmed et al. based on CBCT images. In addition, the number of roots and the level where they bifurcated were identified, and morphological measurements were performed based on anatomical landmarks. Single-rooted forms were most common. Bifurcation occurred most often in the middle part of the root. The most common canal configuration was type I according to Vertucci and code ¹ SP¹ according to the new classification. The measurements showing the results were as follows (mm): palatal cusp/buccal cusp/the lowest point of the occlusal surface to pulp chamber ceiling 6.18/6.54/4.77; the ceiling of the pulp chamber was found at the CEJ in 92.28% of the specimens. The maxillary second premolars tended to be single-rooted and with one root canal.

Cone-beam computed tomographic evaluation of root canal morphology of mandibular anterior teeth in a Saudi subpopulation, retrospective In-Vivo study

Background

There is variability in the results of dental morphological studies between different ethnic populations. This study aimed to investigate the root canal morphology of mandibular anterior teeth in a Saudi subpopulation in the Riyadh region.

Methods

We examined a total of 1,769 cone-beam computed tomography (CBCT) images of the mandibular anterior teeth, including the central incisors (n = 587), lateral incisors (n = 590), and canines (n = 592). The number and configuration of the root canals were determined. Fisher's exact and Pearson’s chi-square tests were used to assess the differences between sexes and age groups, with a level of statistical significance was set at p < 0.05.

Results

Overall, Type I canal was the most frequent configuration among the mandibular anterior teeth (76.1%). However, the prevalence of Type III canal configuration in the central and lateral incisors was 36.5% and 31%, respectively. Additionally, the mandibular canines were mainly Type I canals (98.4%). The prevalence of canal configuration was predominantly Type I (95.7%), followed by Type III (2.7%), Type IV (0.4%), and Type V (1.2%). There was a statistically significant difference in the canal configurations between men and women (p = 0.02). Females more often had Type I root canals (60.6%), while Type III was more frequent in males (57.2%). However, there were no statistically significant differences between the age groups in canal configuration.

Conclusion

The mandibular anterior teeth of the Saudi subpopulation had mainly one root canal. However, almost one-third of the central and lateral incisors had two canals. CBCT is a useful tool that can be used, if available, to investigate root canal morphology before root canal treatment.

Mandibular incisors with two canals are associated with the presence of the distolingual root in mandibular first molars: a cone-beam computed tomographic study

Background

This study aimed to evaluate the root canal configurations and the association between mandibular first molars and distolingual root (DLR) and mandibular incisors using cone-beam computed tomography (CBCT).

Methods

Mandibular first molars and incisors were evaluated using CBCT images of 150 patients. Mandibular first molars were classified according to the presence or absence of DLR. The curvature of the DLR was evaluated using Schneider’s method in buccolingual and mesiodistal orientations. The angle of the mesiolingual–distolingual–distobuccal canal orifices (ML–DL–DB) was evaluated at the pulpal floor level. The mandibular central and lateral incisors were classified as either single canal or two canals. The association between the root canal system of the mandibular first molar and mandibular incisors was evaluated. Data were analyzed using the Chi-square test, Student’s t-test, and odds ratios from binary logistic regression. The significance level was set at 5%.

Results

The frequency of mandibular first molars with DLR was 27.0% and that of mandibular incisors with two canals was 25.8%. The curvature of the DLR was 37.1° in the buccolingual orientation and 10.4° in the mesiodistal orientation. The angle of ML–DL–DB was 79.0°. The presence of two canal systems in mandibular incisors was associated with the presence of DLR in the mandibular first molar (left central incisors: p = 0.001, odds ratio = 4.25; left lateral incisors: p < 0.001, odds ratio = 3.8; right central incisors: p = 0.003, odds ratio = 3.86; right lateral incisors: p = 0.001, odds ratio = 3.44) but not with the curvature of the DLR or angle of the ML–DL–DB orifice (p > 0.05).

Conclusions

The mandibular first molar showed a high incidence of separate DLRs. It was confirmed that DLR in the mandibular first molar is highly associated with the presence of two-canal system in the mandibular incisors. This association can aid clinicians in successful endodontic treatments.

Postoperative pain after SWEEPS, PIPS, sonic and ultrasonic-assisted irrigation activation techniques: a randomized clinical trial

To investigate the efficacy of a new laser irrigation activation system [shock wave-enhanced emission photo-acoustic streaming (SWEEPS)] in terms of postoperative pain after primary root canal treatment compared with other techniques, namely photon-induced photo-acoustic streaming (PIPS), sonic system with EDDY, passive ultrasonic system (PUI), and manual dynamic activation (MDA). Two hundred patients with symptomatic irreversible pulpitis in mandibular premolar teeth were enrolled and randomly allocated to five different irrigation activation groups (n = 40) after chemo-mechanical root canal preparation. For irrigation activation, the SWEEPS and PIPS tips were attached to the Er-YAG laser system in the respective groups, while the Irrisafe tip was used in the PUI group and the EDDY tip in the sonic group. In the MDA group, irrigation was agitated with the master gutta-percha cone. At postoperative hours 8, 24, and 48 and on day 7, pain intensity was evaluated using the 10-mm Visual Analog Scale (VAS) and analgesic intake was recorded. The Kruskal-Wallis test was used to analyze the VAS scores, and pain prevalence and analgesic intake were examined with the Pearson's chi-square test at the 5% significance level. The PIPS and SWEEPS groups had the lowest level and prevalence of pain when compared to the remaining groups (P < 0.001). The PUI, sonic and MDA groups did not differ in terms of pain scores at hours 8 and 48 (P > 0.05). On day 7, the highest score and pain prevalence were recorded in the MDA group (P < 0.001). There was no difference between the groups in terms of analgesic intake (P > 0.05). Laser-activated irrigation systems provided lower postoperative pain scores and levels compared to the other activation systems. The MDA group had the highest pain scores and incidence at the end of the seventh day.

A comparative study on mandibular premolar root canal morphology employing cone-beam computed tomography and microcomputed tomography imaging

Aim:

The present study was to investigate the root canal morphology of mandibular premolars in Malaysian population using cone-beam computed tomography (CBCT) and microcomputed tomography (micro-CT) scanned images.

Materials and Methods:

Sixty selected mandibular premolars were evaluated in vitro and the root canal morphologies of the samples were categorized based on Vertucci's classification. The position of apical foramen, presence, and location of lateral canal, as well as prevalence of apical delta, were also determined.

Results:

Invariably, Type I variety (Vertucci's classification) was the most frequent root canal morphology followed by Type V and Type III after micro-CT imaging. CBCT investigation also revealed Type I as the most numerous; however, the second most common configuration was Type III followed closely by others. There was a moderate agreement in Vertucci's classification of root canal configuration and also prevalence of apical delta (kappa: 0.516 and 0.550, respectively). However, only a fair agreement (kappa: 0.289) was observed between CBCT and micro-CT on the prevalence of lateral canal.

Conclusion:

CBCT should be cautiously used in determining root canal configuration as deficiencies were evident and revealed during micro-CT imaging.

Analysis of root morphology and internal anatomy of 400 maxillary first premolars using cone-beam computed tomography in an Indian Dravidian subpopulation: An ex vivo study

Background

There have been numerous cone-beam computed tomography (CBCT) studies done over the years to analyze the canal configurations among various racial and ethnic population groups. Several of these studies have highlighted a certain consistency in the incidence of particular features within these population subsets.

Aim

The study aimed to analyze the root morphology and canal configurations of the maxillary first premolar (Mx1PM) in the Indian Dravidian subpopulation using CBCT.

Setting and Design

This study involved a retrospective analysis of 200 CBCT scans, which included 400 Mx1PM.

Methods

The CBCT images were evaluated, and the number of roots and canal configurations was recorded as per the Vertucci's classification.

Statistical Analysis

Variations in the number of roots and canal anatomies were statistically interpreted using the Chi-square test of association with the significance level set at P < 0.05.

Results

Among the 400 Mx1PM studied, 116 (29%) teeth displayed single roots and 284 (71%) showed the presence of two roots. The single-rooted premolars revealed a varied canal configuration with a predominance of Vertucci's Type II configuration in around 53.4% of the Mx1PM. The two-rooted premolars revealed 100% Type I canal configuration.

Conclusion

The Mx1PM studied predominantly showed the two-rooted morphology with independent canals in each root. There was no significant difference between the teeth on either side of the same arch. The CBCT is an excellent nondestructive modality that can help us study the internal anatomy of pulp space accurately.

THE PREVALENCE OF A SECOND ROOT CANAL IN MANDIBULAR ANTERIOR TEETH VARIES BY GEOGRAPHIC REGIONS AND DEMOGRAPHIC FACTORS

ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION

Martins JNR et al. Influence of Demographic Factors on the Prevalence of a Second Root Canal in Mandibular Anterior Teeth - A Systematic Review and Meta-Analysis of Cross-Sectional Studies Using Cone Beam Computed Tomography. Arch Oral Biol. 2020 Aug;116:104,749. doi: 10.1016/j.archoralbio.2020.104749.

SOURCE OF FUNDING

No funding was obtained for this research TYPE OF STUDY/DESIGN: Systematic review with meta-analysis.

Canal Configuration of Maxillary Premolars in Cukurova Population: A CBCT Analysis

Background/Aim: Aim of this study was to evaluate the anatomy of root-canal systems and numbers of permanent maxillary premolars’ roots and canals, using cone beam computed tomography scans.

Material and Methods: In this retrospective and observational study, maxillary right/left and first/second premolars of patients who were screened with cone beam computed tomography for various reasons in a Turkish dental school, were examined. Evaluated parameters were age, gender, canal configuration (Vertucci classification) and numbers of roots and canals. Chi-square test was used for statistical analysis. The level of significance was set at p<0.05.

Results: A total of 1086 maxillary premolars including 555 first premolars and 531 second premolars were examined in 331 patients (186 female, 145 male). Presence of two roots was shown in 75% of first premolars. 76.3% of second premolars were found to have a single root. Most common canal configuration was type IV (73.2%) for first premolars and type II (32.4%) for second premolars. There was a significant relationship between gender and numbers of first and second premolars’ roots and canals.

Conclusions: High heterogeneity of maxillary premolar root-canal system anatomy should be considered during endodontic treatment.

The quality of root canal treatment and periapical status of permanent teeth in Turkish children and teens: a retrospective CBCT study

OBJECTIVE

This study aimed to assess the quality of root canal fillings and the prevalence of periapical radiolucencies in the permanent teeth of 6-18 year-old Turkish children.

METHODS

CBCT images of 150 patients' 235 teeth with a mean age of 16.0 ± 2.06 years were included. Root development stage, quality of root canal filling, the presence and severity of periapical radiolucencies, and their relationship with anatomical structures were recorded. Correlations between the quality of root canal filling, periapical lesion, and lesion size were assessed using regression analyses.

RESULTS

A total of 235 teeth (528 root canals) were evaluated. 65.5% of root canals had periapical lesions. Immature roots and mandibular teeth had the highest prevalence and the largest size of periapical radiolucencies (p < 0.05). Overfilling (n = 52), underfilling (n = 93), unfilled (n = 46), inhomogeneously filled (n = 113) root canals and poor coronal restoration (n = 85 teeth) were observed in terms of technical failures of endodontic treatment. The quality of endodontic treatment was associated with the presence of periapical lesion and lesion size (p < 0.05). Teeth with under-filled, overfilled or inhomogeneously filled root canals and poor coronal restoration had a periapical lesion larger than 5 mm (p < 0.05). Immature teeth were most associated with the presence of lesion (OR = 4.07) and the lesion size > 5 mm (OR = 3.71).

CONCLUSION

The prevalence of periapical radiolucencies in young permanent teeth showed an increase when the tooth was an incisor, had incomplete root development, or the root filling had technical errors.

Root form and canal anatomy of maxillary first premolars: a cone-beam computed tomography study

The aim of this study was to evaluate the root and canal morphology of permanent maxillary first premolars in a Polish population using cone-beam computed tomography scanning (CBCT) and to compare the classifications by Vertucci and Ahmed et al. Images of 350 maxillary first premolars were analyzed. Scans were obtained from 226 patients: 131 women and 95 men. The root canal configurations were classified according to Vertucci and a new system by Ahmed et al. In addition, the number of roots and the level where roots bifurcated were identified. The results were submitted to statistical analysis. Most maxillary first premolars had two roots (69.1%). Most bifurcations were located in the coronal part of the root (44.2%) and the least in the apical part (15.3%). Bifurcation in the coronal part of the root was observed more often in the teeth of men than women. In turn, bifurcation in the central or apical part was significantly more common in women than in men. The most common canal configuration of the maxillary first premolars was type IV (78.2%) according to Vertucci and ²FPB¹P¹ (65.4%) according to the new classification. Among the remaining cases, almost all types of canals described by Vertucci, and many combinations of codes given in the new classification were demonstrated. The maxillary first premolars displayed a wide range of root and canal anatomical variations. The new system for classifying canal morphology based on Ahmed et al. is more accurate than the Vertucci classification.

Occurrence and Morphology of MB2 Canals in Maxillary First Molars in an Indian Subpopulation: A Cone Beam Computed Tomography Study

Introduction Molars have been known to display varied morphologies. Maxillary first molar is the tooth with the largest volume and most complex root and root canal anatomy; also, possibly the most treated and least understood posterior tooth. The present study aimed to investigate the occurrence and morphology of MB2 canals in maxillary first molars in an Indian subpopulation (Dakshina kannada) using cone beam CT (CBCT) imaging.

Materials and Methods A total of 330 maxillary molars were placed on “U-” shaped modelling wax template, mimicking the natural arch and digitally scanned, of which 196 scans met the inclusion criteria and were analyzed for unusual root canal anatomy by CBCT. To analyze the occurrence and morphology of the canals, the acquired data was examined by two endodontists and discussed till an agreement was reached.

Results The results were subjected to descriptive analysis. The majority of patients 103 (52.6%) teeth showed the presence of MB2 canals. As much as 83.5% of teeth depicted Vertucci's type II morphology, and 16.5% teeth presented with Vertucci's type IV morphology.

Conclusion CBCT overcomes the limitations of conventional radiography. However, the decision to use CBCT in the management of endodontic problems must be based on a case-by-case basis and only when sufficient diagnostic information is not obtained from diagnostic tests.

A scoping review of four decades of outcomes in non-surgical root canal treatment, non-surgical retreatment and apexification studies. Part 1: process and general results

BACKGROUND

Despite initiatives to standardize reports, variance in study design, outcomes assessed, and tools used are persistent in literature. This review scoped existing literature on endodontic outcome studies for future development of core outcome sets.

DESIGN

Comprehensive literature search of randomized controlled trials, cohort, case-control studies, or case series (≥10 patients), published after 1980, patients aged ≥10 years, and any preoperative pulpal and periapical diagnosis in permanent teeth requiring non-surgical root canal treatment (NS-RCT), retreatment (NS-ReTx), or apexification was performed. Abstracted data were reported through descriptive statistics.

RESULTS

Of 9,957 studies screened, 354 were included. An increase in the quantity of endodontic outcome publications and levels of evidence in their study design was noted over the past four decades. Although 41% of studies included participants aged 26-50, literature including participants aged >50 has increased since 2000. Apexification and NS-ReTx were mostly provided by specialists and postgraduate students. The most common follow-up period was 2-5 years (35%), and most randomized controlled trials (58%) reported follow-up times <1 year. Multiple visit treatment was most common in apexification studies (85%). Deficiency, inconsistency and ambiguity were observed across many reports.

CONCLUSIONS

NS-ReTx and NS-RCT/NS-ReTx studies have increased over the past two decades, particularly those focusing on molars and patients >50 years old. Despite the progress in endodontic research, heterogeneity in reporting styles yield considerable limitations, particularly data standardization challenges and inconsistencies in methods and results reporting. This scoping review highlighted the state of available research and supported the development of standardized guidelines for future investigations.

Prevalence of Missed Canals and Their Association with Apical Periodontitis in Posterior Endodontically Treated Teeth: A CBCT Study

Background

This study aimed to assess the prevalence of missed canals in endodontically treated teeth and their association with apical periodontitis in a Saudi Arabian population using CBCT.

Materials and Methods

A total of 208 CBCT radiographs were investigated. For each tooth, radiographs of axial, coronal, and sagittal segments were acquired to appraise the external as well as the internal structure of the root canal system and apical area. In root canal-treated teeth, unfilled canals appearing from the cementoenamel junction to the apex were defined as missed untreated canals; and a periapical lesion was considered when disruption of the lamina dura was detected, and the low-density area associated with the radiographic apex was at least twice the width of the periodontal ligament space. The data were presented as frequencies and percentages. The Z-test was used to analyze the differences in proportions with the significance level set at P value <0.05.

Results

The overall prevalence of missed canals among endodontically treated teeth was 18%. The prevalence of missed canals was higher in maxillary first molars with 40.6%. The overall prevalence of apical periodontitis among teeth with missed canals was 90%. It was 84.2% in the maxilla and 100% in the mandible. The second mesiobuccal canal in the maxillary first molars and mesiobuccal and distobuccal canals in mandibular teeth were the most missed canals.

Conclusion

Apical periodontitis in root canal-treated teeth with missed canals was high (90%), with most identified missed canals in maxillary and mandibular first molars.

Micro-tomographic characterization of the root and canal system morphology of mandibular first premolars in a Chilean population

This study aimed to analyze the root anatomy and root canal system morphology of mandibular first premolars in a Chilean population. 186 teeth were scanned using micro-computed tomography and reconstructed three-dimensionally. The root canal system morphology was classified using both Vertucci’s and Ahmed’s criteria. The radicular grooves were categorized using the ASUDAS system, and the presence of Tomes’ anomalous root was associated with Ahmed’s score. A single root canal was identified in 65.05% of teeth, being configuration type I according to Vertucci’s criteria and code ¹MP¹ according to Ahmed’s criteria. Radicular grooves were observed in 39.25% of teeth. The ASUDAS scores for radicular grooves were 60.75%, 13.98%, 12.36%, 10.22%, 2.15%, and 0.54%, from grade 0 to grade 5, respectively. The presence of Tomes’ anomalous root was identified only in teeth with multiple root canals, and it was more frequently associated with code ¹MP^1–2 of Ahmed’s criteria. The root canal system morphology of mandibular first premolars showed a wide range of anatomical variations in the Chilean population. Teeth with multiple root canals had a higher incidence of radicular grooves, which were closely related to more complex internal anatomy. Only teeth with multiple root canals presented Tomes’ anomalous root.

A cone-beam computed tomography study of the prevalence and location of the second mesiobuccal root canal in maxillary molars

Objectives

This study aimed to investigate the incidence and location of the second mesiobuccal root (MB2) canal in maxillary molars with the aid of various measuring points and lines using cone-beam computed tomography (CT).

Materials and Methods

A total of 205 images of patients who underwent cone-beam CT examinations between 2011 and 2015 as part of their dental diagnosis and treatment were included. There were 76 images of the maxillary first molar and 135 images of the maxillary second molar. Canal orifices were detected at −1 mm from the top of the pulpal floor on cone-beam CT images. Image assessment was performed by 2 observers in reformatted image planes using software. Assessments included measurement of the distance between the MB1 and MB2 canals, and the angles between the lines connecting the MB1-MB2 and distobuccal (DB)-palatal (P) canals. The data were analyzed using the student's t-test.

Results

The prevalence of the MB2 canal was 86.8% in the first molar and 28.9% in the second molar. The angle between the lines connecting the MB1-MB2 and DB-P canals was 2.3° ± 5.7° in the first molar and −3.95° ± 7.73° in the second molar. The distance between the MB1 and MB2 canals was 2.1 ± 0.44 mm in the first molar and 1.98 ± 0.42 mm in the second molar.

Conclusions

The angles between the lines connecting the MB1-MB2 and DB-P canals was almost parallel. These findings may aid in the prediction of the location of the MB2 canal orifice.

Evaluation of root and canal morphology of maxillary permanent first molars in an Emirati population; a cone-beam computed tomography study

Background

The aim of this study was to analyze the root and canal morphology of the maxillary permanent first molars in an Emirati population using cone-beam computed tomography (CBCT).

Methods

Two hundred and sixty-one CBCT scans were acquired. The data were extracted and anonymized to remove all patient identifiers. Two observers (an endodontic resident and an endodontist) evaluated all scans on diagnostic quality monitors.

Results

The prevalence of a second mesiobuccal canal (MB2) was 80.1% in all examined samples. Type II Vertucci classification, was the most common canal configuration (59%) in the mesiobuccal root, followed by Types I (19.9%) and IV (15.3%), while Type III was the least common (5.7%). Types I, II, and IV were significantly more common in the 21–40-year age group (P < 0.001), while Type III was observed significantly more often in the < 20-year age group (P < 0.001). No significant effect of gender on the prevalence of Vertucci classification in the mesiobuccal root of maxillary first molars (P = 0.74) was found. Analysis of bilateral symmetry showed that 80% teeth had perfect bilateral symmetry, whereas 20% were asymmetrical. Type II canal configuration showed the highest prevalence of bilateral symmetry (48.7%), followed by Type I (15%) and Type IV (10%), while Type III showed the least prevalence of symmetry (3%).

Conclusions

This was the first study to analyze the prevalence of MB2 canal in an Emirati population. Our results indicate high prevalence of MB2 (80.1%) and emphasize the importance of using advanced techniques to locate the MB2 canal.

Postoperative pain after different irrigation activation techniques: a randomized, clinical trial

The aim of this study was to assess the effectiveness of irrigation activation techniques on postoperative pain (PP) in mandibular premolar teeth with irreversible pulpitis after single-visit endodontic treatment. A total of 160 patients with symptomatic irreversible pulpitis were included in this prospective randomized clinical study. Four different activation methods were used in mandibular premolar teeth. In group 1, teeth were irrigated with side-port endodontic needles (NI) without any agitation; in groups 2 and 3, sonic activation was performed using EDDY and EndoActivator (EA), respectively; and in group 4, passive ultrasonic irrigation (PUI) was used. Patients' analgesic intake-as well as pain intensity during and after treatment-were recorded at 8, 24, 48 h and 7 days. The data relating to age, sex and analgesic intake was evaluated using the Chi-square test and the preoperative pain and PP intensity at different time intervals was evaluated with the Kruskal-Wallis test at a 5% significance level. Highest PP was recorded at 8 h, pain intensity decreased in all groups by the time. Pain in the NI group was found higher than that of EDDY group at 24 h (P < 0.05). EA and PUI had caused mild pain and had similar pain scores at 24 h. (P > 0.05). No statistically difference was found among the groups with regard to analgesic intake (P > 0.05). Although there were slight differences in PP levels between the groups at 24 h, pain levels decreased in all groups after 24 h. Activation of the irrigation solution did not make any difference in terms of PP after 24 h.

Mandibular first premolar with five root canals: a case report

Background

Understanding the anatomical morphology of the root canal is key for successful root canal treatment. The aims of this case presentation are to report a unique case of root canal treatment involving five root canals in the mandibular first premolar and to highlight the importance of variation in root canals of mandibular first premolars in clinical practice.

Case presentation

A 25-year-old male with intermittent pain in relation to the lower right posterior teeth over 3 weeks was diagnosed with symptomatic pulpitis in tooth #44. Four root canals were found, including mesiobuccal, distobuccal-1, distobuccal-2, and distolingual roots, and the Mtwo rotary system was used for root canal preparation. The four root canals were filled after 2 weeks, when a fifth canal was found, located in the buccal cavity. The fifth canal was confirmed to be the mesiolingual root canal by cone beam computed tomography (CBCT) and was found to be curved. After completion of the root canal filling, CBCT was performed, and a three-dimensional root canal image was reconstructed. After 1 week of observation, the tooth was repaired using composite resin filling.

Conclusions

This is the first case presentation of a fifth canal of the mandibular first premolar and advances our understanding of variations in the anatomy of the mandibular first premolar. This case report provides a reference for the treatment of mandibular first premolars.

Missed canals in endodontically treated maxillary molars of a Brazilian subpopulation: prevalence and association with periapical lesion using cone-beam computed tomography

OBJECTIVES

To evaluate the prevalence of missed canals in endodontically treated maxillary molars through cone-beam computed tomography (CBCT) images and to verify their association with the presence of periapical lesions.

MATERIAL AND METHODS

Three oral radiologists evaluated 633 maxillary molars in CBCT exams regarding number of roots, number of root canals, number of missed canals, anatomic identification of missed canals, presence of periapical lesions, and root location of the periapical lesions. Data were statistically analyzed at a 5% significance level.

RESULTS

Descriptive statistical analysis showed that among 395 first molars, 218 had at least one missed canal, and 186 (46.5%) had a missed canal and periapical lesion simultaneously. Of these, 72.4% (134) of the missed canals were only mesiobuccal 2 (MB2). Among 238 s molars evaluated, 121 presented at least one missed canal, and 104 (43.6%) had a missed canal and periapical lesion simultaneously. Of these, 81.7% (85) of the missed canals were only MB2. The chi-squared test showed an association between the presence of missed canals and periapical lesions for 1st and 2nd maxillary molars. Teeth that presented a missed canal showed an odds ratio (OR) of 2.57 (p < 0.0001) of being associated with a periapical lesion. Missed canal occurrence was positively related to the number of root canals (z = 13.06, p < 0.0001), meaning when the number of root canals is higher, there is a higher probability of missed canal occurrence. According to the model calculated prediction, for a one-unit increase in the number of canals, the probability of missed canals increases by 4.22%.

CONCLUSIONS

It was concluded that MB2 was the most frequently missed canal, associated with the presence of periapical lesions in endodontically treated maxillary molars.

CLINICAL RELEVANCE

Professionals' negligence of anatomical root variations has been contributed to the high prevalence of missed canals, leading to failures in endodontic treatment. Their association with periapical lesion occurrence emphasizes the importance of correct detection and instrumentation of these canals.

Intentional replantation - a clinical review of cases undertaken at a major UK dental school

Introduction Intentional replantation (IR) may offer a solution for persistent periapical lesions associated with endodontically treated teeth in select cases. This case series demonstrates the use of IR as an alternative treatment approach to both orthograde and surgical endodontic retreatment. The indications, contraindications, benefits and risks of IR are discussed, and the clinical procedure is outlined.Setting Restorative Department, University Dental Hospital of Manchester, UK.Case reports Of the 13 cases presented, the follow-up period before discharge ranged from 3-28 months. Only one tooth which presented intra-operative challenges required extraction three months after IR due to post-operative mobility.Conclusion In select cases, IR may provide a simple, less invasive and cost-effective alternative to both endodontic retreatment and extraction alone following appropriate training.

A Rare Case of Single-Rooted Mandibular Second Molar with Single Canal

The root canal anatomy of mandibular second molar teeth is known to be highly variable. Whilst the most frequently seen configuration is two mesial canals and one distal canal, other variations such as four canals, two canals, and C-shaped canal system do also exist. This case report describes the diagnosis and management of unusual root canal configuration of a mandibular second molar, with one canal in a single conical root, using the contemporary advancements in endodontics. Following clinical and radiographic examinations of the case, a diagnosis of symptomatic irreversible pulpitis with symptomatic apical periodontitis of tooth #47 was established, and root canal treatment followed by composite buildup and crown were planned. Clinicians should be aware of the different anatomic variants each tooth may exhibit. Furthermore, clinicians need to possess the proper knowledge and skills that allow them to utilize the diagnostic and therapeutic tools available at their disposal in order to optimize the quality of care provided to their patients.

Application of a new system for classifying root canal morphology in undergraduate teaching and clinical practice: a national survey in Malaysia

AIM

To evaluate and compare the feedback of final year undergraduate dental students in eight Malaysian dental schools on the application of a new system for classifying root canal morphology in teaching and clinical practice.

METHODS

One PowerPoint presentation describing two classification systems for root canal morphology (Oral Surgery Oral Medicine Oral Pathology, 1974 38, 456 and its supplemental configurations, International Endodontic Journal 2017, 50, 761) was delivered to final year undergraduate dental students in eight dental schools in Malaysia by two presenters (each presented to four schools). To examine students' feedback on the utility of each system, printed questionnaires consisting of six questions (five multiple choice questions and one open-ended question) were distributed and collected after the lecture. The questionnaire was designed to compare the classification systems in terms of accuracy, practicability, understanding of root canal morphology and recommendation for use in pre-clinical and clinical courses. The exact test was used for statistical analysis, with the level of significance set at 0.05 (P = 0.05).

RESULTS

A total of 382 (out of 447) students participated giving a response rate of 86%. More than 90% of students reported that the new system was more accurate and more practical compared with the Vertucci system (P < 0.001). Overall, 97% of students reported the new system helped their understanding of root and canal morphology compared with the Vertucci classification (P < 0.001). Over 97% of students recommended the use of the new system in teaching, pre-clinical courses and clinical practice (P < 0.001). Except for two schools, no significant difference was detected between the responses of students for all questions at the different schools (P > 0.05). The students' responses for all questions were almost similar for both presenters (P > 0.05).

CONCLUSIONS

The new system of International Endodontic Journal 2017, 50, 761 for classifying root and canal morphology was favoured by final year undergraduate dental students in Malaysia. The new system has the potential to be included in the undergraduate endodontic curriculum for teaching courses related to root and canal morphology.

Unusual Maxillary First Molars with C-Shaped Morphology on the Same Patient: Variation in Root Canal Anatomy

A maxillary first molar should be considered a four-canal tooth until proved otherwise; however, a clinician should also be aware of the possibility of the presence of C-shaped root canal configuration with or without possibility of splitting into two or three canals. The two clinical cases reported in this paper describe the endodontic treatment of two maxillary first molars, on the same patient, with uncommon anatomy: the first case is about a maxillary first molar with only one C-shaped root and one oval canal with a large buccolingual diameter, a C1 type according to Fan's classification; the second case, about the contralateral maxillary first molar, is probably the first case documented of a maxillary first molar with a C-shaped root canal and C-shaped root with complete fusion of the three roots, having a C3 configuration.

Root and root canal diversity in human permanent maxillary first premolars and upper/lower first molars from a 14th-17th and 18th-19th century Radom population

OBJECTIVE

The aim of this study was to assess whether analyzed groups from two historical periods: Late Medieval (LMP), and Modern (MP) from Radom varied in the number of tooth roots and root canal system morphology.

METHODS

Root morphology of 229 permanent human teeth were analyzed using Cone Beam Computed Tomography. Additionally, the mitochondrial DNA (mtDNA) of 29 individuals from the LMP and 31 from the MP was analyzed.

RESULTS

In LMP, the maxillary first premolars were dominated by one root, while in MP second and third roots also appeared. Maxillary first molars in LMP presented three roots, while two-rooted forms occurred in MP. All mandibular first molars from the LMP and almost all (98%) from MP presented two roots. The greatest diversity in terms of root canal number occurred in one-rooted maxillary first premolars, the mesiobuccal root of the maxillary first molars, and the mesial and distal roots of the mandibular first molars in both groups. A few haplogroups from outside Europe (C, N, and R) were recorded in the MP Radom population. Moreover, this population had substantially higher haplogroup diversity compared with the LMP population.

CONCLUSION

Odontological research indicates an increase in the diversity in the number of roots and the shape of root canals in MP. This information corresponds to genetic research, which also indicates an increase in the diversity of haplogroups during the MP.

Maxillary Lateral Incisor with 3 Root Canals: A Case Report

The proper knowledge of the root canal system anatomy is crucial to perform successful endodontic treatments. Maxillary lateral incisors usually have a single root. However, aberrant canal configurations of this tooth have been reported in the literature. The clinician should be aware of the difficulties arising from this more complex root canal anatomy and should be able to manage them. A rare case of a maxillary lateral incisor with three root canals is presented in this article; the challenge of diagnosis and treatment in similar situations is also discussed.