Silver as an Example of the Applications of Photochemistry to the Synthesis and Uses of Nanomaterials†,‡

Improved imaging and preservation of lysosome dynamics using silver nanoparticle-enhanced fluorescence

The dynamics of living cells can be studied by live-cell fluorescence microscopy. However, this requires the use of excessive light energy to obtain good signal-to-noise ratio, which can then photobleach fluorochromes, and more worrisomely, lead to phototoxicity. Upon light excitation, noble metal nanoparticles such as silver nanoparticles (AgNPs) generate plasmons, which can then amplify excitation in direct proximity of the nanoparticle's surface and couple to the oscillating dipole of nearby radiating fluorophores, modifying their rate of emission and thus, enhancing their fluorescence. Here, we show that AgNPs fed to cells to accumulate within lysosomes enhanced the fluorescence of lysosome-targeted Alexa488-conjugated dextran, BODIPY-cholesterol, and DQ-BSA. Moreover, AgNP increased the fluorescence of GFP fused to the cytosolic tail of LAMP1, showing that metal enhanced fluorescence can occur across the lysosomal membrane. The inclusion of AgNPs in lysosomes did not disturb lysosomal properties such as lysosomal pH, degradative capacity, autophagy and autophagic flux, and membrane integrity, though AgNP seemed to increase basal lysosome tubulation. Importantly, by using AgNP, we could track lysosome motility with reduced laser power without damaging and altering lysosome dynamics. Overall, AgNP-enhanced fluorescence may be a useful tool to study the dynamics of the endo-lysosomal pathway while minimizing phototoxicity.

Silver nanoparticles with exceptional near-infrared absorbance for photoenhanced antimicrobial applications

In this work, we outline a simple method for synthesizing decahedral and triangular silver nanoparticles using light to tune particle shape and spectral characteristics. Notably, we were able to generate triangular silver nanoparticles with exceptional absorbance in the near-infrared (NIR) region, with high spectral overlap with the biological window, making them particularly promising for biological applications. We further demonstrate that under complementary LED illumination, these excitable plasmonic particles display exceptional antibacterial properties, several orders of magnitude more potent than similar particles under dark conditions or under illumination that does not match particle absorbance. This work demonstrates the powerful effects that LED lights can have on the antibacterial activity of AgNPs, providing an inexpensive and easily implemented route to unlocking the full potential of AgNPs in photobiological applications.

Silver-Based Surface Plasmon Sensors: Fabrication and Applications

A series of novel phenomena such as optical nonlinear enhancement effect, transmission enhancement, orientation effect, high sensitivity to refractive index, negative refraction and dynamic regulation of low threshold can be generated by the control of surface plasmon (SP) with metal micro-nano structure and metal/material composite structure. The application of SP in nano-photonics, super-resolution imaging, energy, sensor detection, life science, and other fields shows an important prospect. Silver nanoparticles are one of the commonly used metal materials for SP because of their high sensitivity to refractive index change, convenient synthesis, and high controllable degree of shape and size. In this review, the basic concept, fabrication, and applications of silver-based surface plasmon sensors are summarized.

Photocatalytic and antibacterial activities of green synthesized Ag doped MgO nanocomposites towards environmental sustainability

The utilization of MgO nanoparticles (NPs) for Photocatalytic and antimicrobial activities has gained lots of attention in recent years. Since silver is an expensive material, it's of interest to check that doping of very small concentration of silver will increase the pollutant degradation efficiency of composites. Here Aloe Vera plant extract was used for synthesis of MgO, Ag NPs and Ag/MgO-nanocomposites (NCs). Green synthesized NPs and NCs were confirmed by using different techniques like UV-Vis, BET, TGA, FTIR, PL, XRD (optical, functional, Thermal, Structural) EDX, TEM, SEM, XPS, EIS and EPR (morphological, elemental, photoelectrical and ROS) studies respectively. Then NPs and NCs were applied for the photocatalytic activity of methylene blue (MB), phenol and antimicrobial studies of E. coli bacteria. Ag/MgO-NCs showed 90.18% dye and 80.67% phenol degradation in 120 min which killed E. Coli pathogenic bacteria in 25 min under solar light irradiations. In disk diffusion methods, it inactivates 24 mm area of bacterial cell growth. Thus, among these green synthesized NPs and NCs, Ag/MgO-NCs exhibited enhanced photocatalytic and antimicrobial activities.

A rapid green synthesis of Ag/AgCl-NC photocatalyst for environmental applications

The present study focuses on extract-mediated Ag nanoparticles (NPs), AgCl-NPs, and Ag/AgCl nanocomposites (NCs) as photocatalysts along with its antimicrobial and dye degradation activities. The synthesis of these NPs and NCs was performed by using Azadirachta indica plant fruit extract and analyzed using UV-Vis spectroscopy to confirm the synthesis and band gap of these NPs and NCs, X-ray diffraction (XRD) to determine its size and crystalline nature. Fourier transform infrared spectroscopy (FTIR) to discern phytochemicals, responsible for the reduction and capping of the synthesized NCs. Scanning electron microscopy analysis (SEM), transmission electron microscopy analysis (TEM), and energy dispersive X-ray (EDX) spectroscopy analysis were performed to validate the morphology and presence of silver and chloride percentage in the composites. Later, these NPs and NCs were used for their potential role in photocatalytic degradation of methylene blue dye and antibacterial activity against Escherichia coli and Staphylococcus aureus of human pathogen. The prepared Ag/AgCl-NCs exhibited an enhanced photocatalytic and antibacterial activities in comparison with pure Ag and AgCl nanomaterials. However, green-synthesized NPs and NCs played dual roles as a photocatalyst and antibacterial agent in various biomedical and industrial sectors. Moreover, we found that it might be a hot research in many other environmental applications in upcoming days.

Scalable and robust photochemical flow process towards small spherical gold nanoparticles

Scalable preparation of small spherical gold nanoparticles under photochemical flow conditions.

Generating highly reflective and conductive metal layers through a light-assisted synthesis and assembling of silver nanoparticles in a polymer matrix

The development of metalized surfaces exhibiting mirror properties and/or electric conductivity without heavy equipments and with low metal charge is a big challenge in view of many industrial applications. We report herein on the photo-assembling of silver nanoparticles (AgNPs) in a polymer matrix, carried out within minutes from an acrylate monomer and silver nitrate at room temperature, under air and without any solvents. The top surface of the material gets converted into a continuous silver thin film and a depthwise concentration gradient of AgNPs is created in the polymer, which images the absorption profile of the actinic UV light in the reactive formulation. This specific assembling of the silver@polymer coating induces excellent reflective and conductive properties. The conductance was observed to strongly increase with increasing the exposure from 3 to 30 min due to the formation of a more and more compact metal film. This coating strategy works with a variety of substrates (textile, paper, glass, wood, plastic and stainless steel). Moreover, on flexible surfaces such as textile, the flexibility was preserved. The possibility to use this kind of nanomaterial as a printing ink, with a much lower metal concentration (3 to 5 wt.%) than concurrent inks, was also demonstrated.

Tuning the morphology of silver nanostructures photochemically coated on glass substrates: an effective approach to large-scale functional surfaces

This paper reports on a simple and environmentally friendly photochemical process capable of generating nano-layers (8-22 nm) of silver nanostructures directly onto glass surfaces. This approach opens the way to large-scale functionalized surfaces with plasmonic properties through a single light-induced processing. Thus, Ag nanostructures top-coated were obtained through photo-reduction, at room temperature, of a photosensitive formulation containing a metal precursor, free from extra toxic stabilizers or reducing agents. The reactive formulation was confined between two glass slides and exposed to a continuous near-UV source. In this way, stable silver nano-layers can be generated directly on the substrate with a very good control of the morphology of as-synthesized nanostructures that allows tailoring the optical properties of the coated layers. The position and width of the corresponding surface plasmon resonance bands can be adjusted over a broad spectral window. By extension, this low-cost and easy-to-apply process can also be used to coat ultra thin layers of metal nanostructures on a variety of substrates. The possibility of controlling of nanostructures shape should achieve valuable developments in many fields, as diverse as plasmonics, surface enhanced Raman scattering, nano-electronic circuitry, or medical devices.

Plasmonic nanoparticles in chemical analysis

In this review various analytical techniques utilising the plasmonic properties of silver and gold nanoparticles have been presented.

In Situ Thermal Generation of Silver Nanoparticles in 3D Printed Polymeric Structures

Polymer nanocomposites have always attracted the interest of researchers and industry because of their potential combination of properties from both the nanofillers and the hosting matrix. Gathering nanomaterials and 3D printing could offer clear advantages and numerous new opportunities in several application fields. Embedding nanofillers in a polymeric matrix could improve the final material properties but usually the printing process gets more difficult. Considering this drawback, in this paper we propose a method to obtain polymer nanocomposites by in situ generation of nanoparticles after the printing process. 3D structures were fabricated through a Digital Light Processing (DLP) system by disolving metal salts in the starting liquid formulation. The 3D fabrication is followed by a thermal treatment in order to induce in situ generation of metal nanoparticles (NPs) in the polymer matrix. Comprehensive studies were systematically performed on the thermo-mechanical characteristics, morphology and electrical properties of the 3D printed nanocomposites.

3D Printing of Conductive Complex Structures with In Situ Generation of Silver Nanoparticles

Coupling the photoreduction of a metal precursor with 3D-printing technology is shown to allow the fabrication of conductive 3D hybrid structures consisting of metal nanoparticles and organic polymers shaped in complex multilayered architectures. 3D conductive structures are fabricated incorporating silver nitrate into a photocurable oligomer in the presence of suitable photoinitiators and exposing them to a digital light system.

Photoinduced development of antibacterial materials derived from isosorbide moiety

A straightforward method for immobilizing in situ generated silver nanoparticles on the surface of a photoactivable isosorbide-derived monomer is developed with the objective to design a functional material having antibacterial properties. The photoinduced thiol-ene mechanism involved in these syntheses is described by the electron spin resonance/spin trapping technique. The resulting materials with or without silver nanoparticles (Ag NPs) were used as films or as coatings on glass substrate. The surface of the synthesized materials was characterized by X-ray photoelectron spectroscopy and scanning electron microscopy, and their thermal and mechanical properties were evaluated by dynamic-mechanical thermal tests, differential scanning calorimetry, thermogravimetric analyses, along with pencil hardness, nanoindentation, and scratch resistance tests. The photoinduced formation of Ag NPs is also confirmed by UV spectrophotometry. Finally, a primary investigation demonstrates the antibacterial properties of the isosorbide-derived material against Staphylococcus aureus and Escherichia coli, as well as its cytocompatibility toward NIH 3T3 fibroblastic cells.

Photoinduced formation of stable Ag-nanoparticles from a ternary ligand-DNA-Ag+ complex

The irradiation of a ternary complex between an intercalator crown-ether conjugate, double-stranded DNA, and Ag⁺ ions leads to the formation of stable Ag nanoparticles.

In situ production of visible light absorbing Ti-based nanoparticles in solution and in a photopolymerizable cationic matrix

The synthesis of visible-light absorbing Ti NPs from photoinitiating systems based on titanium(iv) propoxide derivatives/iodonium salt under light activation.

Time-resolved spectroscopic and density functional theory study of the photochemistry of Irgacure-2959 in an aqueous solution

The photocleavage reaction mechanism of 2-hydroxy-4'-(2-hydroxyethoxy)-2-methylpropiophenone (Irgacure-2959) was investigated using femtosecond (fs) and nanosecond (ns) transient absorption (-TA) spectroscopy and also picosecond (ps) and nanosecond (ns) time-resolved resonance Raman (-TR(3)) spectroscopy experiments in a water-rich (volume ratio of acetonitrile/water = 3:7) solution. TA spectroscopy was used to study the dynamics of the benzoyl radical growth and decay as well as to investigate the radical quenching process by the radical scavenger methyl acrylate. ps- and ns-TR(3) spectroscopies were employed to monitor the formation of the benzoyl radical and also to characterize its electronic and structural properties. The fs-TA experiments results indicate that the Irgacure-2959 lowest lying excited singlet state S1 underwent efficient intersystem crossing (ISC) to convert into its triplet state with a time constant of 4 ps. Subsequently, this triplet species dissociated into the benzoyl and alkyl radicals with a corresponding maximum absorption band at 415 nm. The TR(3) results in conjunction with results from DFT calculations confirmed that Irgacure-2959 cleaved into the benzoyl and alkyl radicals at a fast rate on the tens of picosecond time scale.

Enhanced formation of silver nanoparticles in Ag+-NOM-iron(II, III) systems and antibacterial activity studies

This work reports the role of iron redox pair (Fe(3+)/Fe(2+)) in the formation of naturally occurring silver nanoparticles (AgNPs) in the aquatic environment. The results showed that Fe(3+) or Fe(2+) ions in the mixtures of Ag(+) and natural organic matter enhanced the formation of AgNPs. The formation of AgNPs depended on pH and types of organic matter. Increase in pH enhanced the formation of AgNPs, and humic acids as ligands showed higher formation of AgNPs compared to fulvic acids. The observed results were described by considering the potentials of redox pairs of silver and iron species and the possible species involved in reducing silver ions to AgNPs. Dynamic light scattering and transmission electron microscopy measurements of AgNPs revealed mostly bimodal size distribution with decrease in size of AgNPs due to iron species in the reaction mixture. Minimum inhibitory concentration of AgNPs needed to inhibit the growth of various bacterial species suggested the role of surfaces of tested Gram-positive and Gram-negative bacteria. Stability study of AgNPs, formed in Ag(+)-humic acid/fulvic acids-Fe(3+) mixtures over a period of several months showed high stability of the particles with significant increase in surface plasmon resonance peak. The environmental implications of the results in terms of fate, transport, and ecotoxicity of organic-coated AgNPs are briefly presented.

Organic-coated silver nanoparticles in biological and environmental conditions: fate, stability and toxicity

This review paper presents the overview of processes involved in transformation of organic-coated silver nanoparticles (AgNPs) in biological systems and in the aquatic environment. The coating on AgNPs greatly influences the fate, stability, and toxicity of AgNPs in aqueous solutions, biological systems, and the environment. Several organic-coated AgNP systems are discussed to understand their stability and toxicity in biological media and natural water. Examples are presented to demonstrate how a transformation of organic-coated AgNPs in an aqueous solution is affected by the type of coating, pH, kind of electrolyte (mono- or divalent), ionic strength, organic ligands (inorganic and organic), organic matter (fulvic and humic acids), redox conditions (oxic and anoxic), and light. Results of cytotoxicity, genotoxicity, and ecotoxicity of coated AgNPs to food chain members (plants, bacteria, and aquatic and terrestrial organisms) are reviewed. Key factors contributing to toxicity are the size, shape, surface coating, surface charge, and conditions of silver ion release. AgNPs may directly damage the cell membranes, disrupt ATP production and DNA replication, alternate gene expressions, release toxic Ag(+) ion, and produce reactive oxygen species to oxidize biological components of the cell. A progress made on understanding the mechanism of organic-coated AgNP toxicity using different analytical techniques is presented.

Photochemical induced formed Au nanomaterial with size and shape controlled by luminol–pepsin chemiluminescence reaction

The different size and shape AuNMs were generated in the Pep–HAuCl₄ system based on the photochemical induced effect of alkaline luminol.

Thioxanthone functionalized silver nanorods as smart photoinitiating assemblies to generate photopolymer/metal nano-objects

Silver nanorods (AgNRs) with lengths in the 50-60 nm range were synthesized and functionalized with 2-(2-mercaptoethyl)thioxanthone (C2TX) to generate AgNR@C2TX nanoassemblies. When irradiated at 377 nm in the presence of a diacrylate monomer, these dispersed nanoassemblies initiate radical photopolymerization, indicating that the excited singlet to triplet intersystem crossing process of C2TX in the vicinity of AgNRs was favored while the fluorescence of C2TX was completely quenched at the surface of NRs. SEM and TEM images confirmed the formation of a AgNR-polymer nanocomposite and the homogeneous dispersion of AgNRs in the polymer film. Moreover, under specific experimental conditions allowing the spatial extent of the polymerization to be limited, polymer-capped AgNRs were obtained (polymer diameter of ca. 1 nm).

Zirconocene Dichloride: An Efficient Cleavable Photoinitiator Allowing the in Situ Production of Zr-Based Nanoparticles Under Air

Cp₂ZrCl₂ is presented as both an effective photoinitiator and additive for radical photopolymerization reactions in aerated conditions. This compound is characterized by remarkable properties: (i) an efficiency higher than that of a reference Type I photoinitiator (2,2-dimethoxy-2-phenylacetophenone, DMPA), (ii) an excellent ability, when added to DMPA, to overcome the oxygen inhibition of the polymerization, and (iii) a never reported in situ photoinduced and oxygen-mediated formation of zirconium-based nanoparticles (diameter ranging from 50 to 70 nm). The photochemical properties of Cp₂ZrCl₂ are investigated by steady state photolysis and electron spin resonance (ESR) experiments. The high reactivity of this compound is ascribed to a bimolecular homolytic substitution S_H2 (clearly characterized by molecular orbital calculations) which converts the peroxyls into new polymerization-initiating radicals and oxygenated Zr-based nanoparticles.

Interactions of aqueous Ag+ with fulvic acids: mechanisms of silver nanoparticle formation and investigation of stability

This study investigated the possible natural formation of silver nanoparticles (AgNPs) in Ag(+)-fulvic acid (FA) solutions under various environmentally relevant conditions (temperature, pH, and UV light). Increase in temperature (24-90 °C) and pH (6.1-9.0) of Ag(+)-Suwannee River fulvic acid (SRFA) solutions accelerated the appearance of the characteristic surface plasmon resonance (SPR) of AgNPs. The rate of AgNP formation via reduction of Ag(+) in the presence of different FAs (SRFA, Pahokee Peat fulvic acid, PPFA, Nordic lake fulvic acid, NLFA) and Suwannee River humic acid (SRHA) followed the order NLFA > SRHA > PPFA > SRFA. This order was found to be related to the free radical content of the acids, which was consistent with the proposed mechanism. The same order of AgNP growth was seen upon UV light illumination of Ag(+)-FA and Ag(+)-HA mixtures in moderately hard reconstituted water (MHRW). Stability studies of AgNPs, formed from the interactions of Ag(+)-SRFA, over a period of several months showed that these AgNPs were highly stable with SPR peak reductions of only ~15%. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements revealed bimodal particle size distributions of aged AgNPs. The stable AgNPs formed through the reduction of Ag(+) by fulvic and humic acid fractions of natural organic matter in the environment may be transported over significant distances and might also influence the overall bioavailability and ecotoxicity of AgNPs.

Silver nanoparticles coated with thioxanthone derivative as hybrid photoinitiating systems for free radical polymerization

A new type of photoinitiator for free radical polymerization was synthesized and characterized. 2-(11-Mercaptoundecyloxy)thioxanthone (1) was anchored at the surface of silver nanoparticles (NPs), and the interaction of plasmon field generated in the immediate vicinity of Ag NPs carrying the chromophores was evaluated. The optical features and structure of the silver-initiator nanoassemblies (Ag@1) were characterized by UV-vis and fluorescence spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). TEM and XRD studies revealed the presence of ca. 5-6 nm diameter Ag NPs, and XPS also confirmed the successful anchorage of 1 at their periphery. The nanoassemblies Ag@1 were successfully used as macroinitiator for radical polymerization of acrylate monomers, triggered photochemically, to obtain Ag(0)-polyacrylate nanocomposite materials. The nanocomposite materials synthesized with the use of Ag@1 exhibit attractive possibilities for patterning the surface of thin films.