Laccase-catalysed polymeric dye synthesis from plant-derived phenols for potential application in hair dyeing: Enzymatic colourations driven by homo- or hetero-polymer synthesis

High-Valence Mn MOF Inspired by Laccase Mediators Enables Versatile Nature-Mimicking Catalysis

In nature, active Mn3+ -ligand complexes produced by laccase catalyzed oxidation can act as the low-molecular mass, diffusible redox mediators to oxidize the phenolic substrates overcoming the limitations of natural enzymes. Learning from the metal-ligand coordination of natural functional units, high-valence Mn metal-organic framework (Mn MOF) is constructed to simulate the catalysis in natural mediator system. Benefiting from the characteristics of nanoscale size, rich metal coordination unsaturated sites, and mixed valence state dominated by Mn(III), Nano Mn(III)-TP exhibits superior laccase-mimicking activity, whose Vmax (maximal reaction rate) is much higher than that of natural laccase. Referring to natural systems, relevant free radical experiments prove that the material induces the production of active oxygen species with the assistance of carboxylic acid, and active oxygen species further oxidize phenolic substrates. Based on its robust performances, the primary oxidative degradation of an emerging pollutant triclosan (TCS) is creatively applied, an important antiasthmatic medicine terbutaline sulfate (TBT) detection, and the synthesis of non-toxic and black near-natural dyes for dyeing. By simulating the essential mediators of natural enzymatic catalysis, an Mn MOF-based material that demonstrates multiple novel applications is successfully developed, which introduces a new reliable strategy for achieving versatile nature-mimicking catalysis.

Recent Advancements in Biotechnological Applications of Laccase as a Multifunctional Enzyme

Biotechnological and industrial processes involve applications of various microorganisms and enzymes, and laccase, as a multifunctional enzyme, is admired for its role in degrading a variety of substances. Laccase is a copper-containing oxidase enzyme that is usually found in insects, plants, and microorganisms including fungi and archaea. Several phenolic substrates are oxidized by laccases, which results in crosslinking. Various research work and industrial solutions have identified the true potential of laccases to degrade various aromatic polymers, and their plausible application in bioremediation and other industries is entirely conceivable. This review focuses on laccases as a multifunctional enzyme and provides an overview of its natural origin, catalytic mechanism, and various methods of production. Further, we discuss the various applications of laccase in the biotechnological arena. We observed that laccase can degrade and detoxify various synthetic compounds. The broad substrate specificity of the same makes it worthy for different fields of industrial applications such as food and bioremediation technology, textile and paper technology, biosensors and nanobiotechnology, biofuel, and various other applications, which are described in this paper. These recent developments in the application of laccase show the multifunctional role of laccase in industrial biotechnology and provide an outlook of laccase as a multifunctional enzyme at the forefront of biotechnology.

Thermostable bacterial laccase for sustainable dyeing using plant phenols

Laccase is regarded as an efficacious eco-friendly enzyme in various industries. Thus, various laccases have been explored to mitigate the environmental effects of conventional industrial processing; however, the prospects of laccase in hair dyeing have not been thoroughly explored to date. On account of the adverse environmental and health-related issues posed by chemical hair dyeing, laccase as a natural alternative in dyeing hair has recently gained attention. In this study, we executed hair dyeing with different colours and shades of hair dyes developed from natural plant phenols, including ferulic acid, gallic acid, catechol, and syringaldehyde, catalysed by a novel thermostable bacterial laccase (LacT) from Brevibacillus agri. The dyed hair was characterised in terms of its colourimetric parameters (L*, a*, and b*), colour strength (K/S), reflectance (R) and colour durability. L* means luminosity and is defined by L* values from 0 (black) to 100 (white). A positive value of a* means red shades and a negative value indicates green shades. A positive value of b* shows yellow shades and a negative value indicates blue shades. Optical microscopy of circular and longitudinal sections of the dyed hair revealed that the laccase-catalysed dyes did not merely stick to the surface; instead, they well-penetrated the hair. Furthermore, the dyeing process did not affect the surface morphology of the dyed hair. The dyed hair also exhibited a desirable range of colour diversity in terms of market-driven demands and showed considerable resistance to fading during shampooing and pH alterations. Post-dyeing, the texture and tensile strength of the dyed hair remained nearly unchanged. Overall, the outcomes suggest that LacT holds high potential to be exploited extensively in the hair dyeing industry as an alternative to chemical hair dyes.

Laccase is regarded as an efficacious eco-friendly enzyme in various industries.

In Situ Wood Fiber Dyeing Through Laccase Catalysis for Fiberboard Production

The aim of the present work was to develop an innovative and environmentally friendly process for wood fiber dyeing and to produce 3-dimensionally fully colored medium-density fiberboard (MDF). The potential of laccase-catalyzed polymerization of selected precursors to form dyes useful in fiberboard manufacturing, a technique used for the first time in this field, was demonstrated. Some of the 7 aromatic compounds tested yielded colored products after laccase treatment under both acid and alkaline conditions, and a good variety of colors was attained by using mixtures of two different monomers. To demonstrate the coloration and design potential of laccase conversion of aromatic compounds, MDFs were enzymatically dyed using an in situ one-step laccase-catalyzed coloration process, and the results were compared against commercial MDFs obtained by using organic coloring agents. Important advantages over conventional processing methods include good color fastness and, in some cases, new hydrophobic properties, allowing designers and woodworkers to explore the beauty of textures and the use of simpler and milder processing conditions that eliminate harsh chemical use and reduce energy consumption.

A Putative Lignin Copper Oxidase from Trichoderma reesei

The ability of Trichoderma reesei, a fungus widely used for the commercial production of hemicellulases and cellulases, to grow and modify technical soda lignin was investigated. By quantifying fungal genomic DNA, T. reesei showed growth and sporulation in solid and liquid cultures containing lignin alone. The analysis of released soluble lignin and residual insoluble lignin was indicative of enzymatic oxidative conversion of phenolic lignin side chains and the modification of lignin structure by cleaving the β-O-4 linkages. The results also showed that polymerization reactions were taking place. A proteomic analysis conducted to investigate secreted proteins at days 3, 7, and 14 of growth revealed the presence of five auxiliary activity (AA) enzymes in the secretome: AA6, AA9, two AA3 enzymes), and the only copper radical oxidase encoded in the genome of T. reesei. This enzyme was heterologously produced and characterized, and its activity on lignin-derived molecules was investigated. Phylogenetic characterization demonstrated that this enzyme belonged to the AA5_1 family, which includes characterized glyoxal oxidases. However, the enzyme displayed overlapping physicochemical and catalytic properties across the AA5 family. The enzyme was remarkably stable at high pH and oxidized both, alcohols and aldehydes with preference to the alcohol group. It was also active on lignin-derived phenolic molecules as well as simple carbohydrates. HPSEC and LC-MS analyses on the reactions of the produced protein on lignin dimers (SS ββ, SS βO4 and GG β5) uncovered the polymerizing activity of this enzyme, which was accordingly named lignin copper oxidase (TrLOx). Polymers of up 10 units were formed by hydroxy group oxidation and radical formation. The activations of lignin molecules by TrLOx along with the co-secretion of this enzyme with reductases and FAD flavoproteins oxidoreductases during growth on lignin suggest a synergistic mechanism for lignin breakdown.

Colorful Pigments for Hair Dyeing Based on Enzymatic Oxidation of Tyrosine Derivatives

Melanin exists widely in nature and can afford a variety of colors from black to brown and red according to chemical structure differences and specific mixtures. Inspired by nature, this work reports that tyrosine derivatives with different protecting groups at its N- or C-terminal can be enzymatically oxidized into melanin-like pigments with a wide range of colors. The emergence of colorful pigments can be attributed to the incomplete enzymatic oxidation and polymerization caused by the chemical premodification of the tyrosine molecule. The pigments can be deposited on the surface of the hair to obtain a series of colorful and saturated hair dye effects. Moreover, after the pigments were coated on the hair, we can further deposit silver nanoparticles through in situ reduction, making these coatings have anti-inflammatory and antibacterial potential, thereby expanding their potential use for people with low immunity or those who work in hospitals. This work proposes a green and effective way to synthesize colorful pigments with great potential applications in the hair dying and cosmetic industries.

Advances in laccase-triggered anabolism for biotechnology applications

This is the first comprehensive overview of laccase-triggered anabolism from fundamental theory to biotechnology applications. Laccase is a typical biological oxidordeuctase that induces the one-electronic transfer of diverse substrates for engendering four phenoxy radicals with concomitant reduction of O₂ into 2H₂O. In vivo, laccase can participate in anabolic processes to create multifarious functional biopolymers such as fungal pigments, plant lignins, and insect cuticles, using mono/polyphenols and their derivatives as enzymatic substrates, and is thus conducive to biological tissue morphogenesis and global carbon storage. Exhilaratingly, fungal laccase has high redox potential (E° = 500-800 mV) and thermodynamic efficiency, making it a remarkable candidate for utilization as a versatile catalyst in the green and circular economy. This review elaborates the anabolic mechanisms of laccase in initiating the polymerization of natural phenolic compounds and their derivatives in vivo via radical-based self/cross-coupling. Information is also presented on laccase immobilization engineering that expands the practical application ranges of laccase in biotechnology by improving the enzymatic catalytic activity, stability, and reuse rate. Particularly, advances in biotechnology applications in vitro through fungal laccase-triggered macromolecular biosynthesis may provide a key research direction beneficial to the rational design of green chemistry.

Enhanced darkening effect from the interaction of MnO2 and oxygen on the component evolution of amino-phenolic humic-like substances

Humification is greatly enhanced by metallic oxides in nature, and the related products are critical to various environmental processes. However, little is known about the interaction between metallic oxides and oxygen in promoting the oxidative polymerization of small organic molecules during the humification process. The synthesis of humic-like acids (HLAs) with MnO₂ was performed in the presence and absence of oxygen, and the influence of oxygen and MnO₂ on the composition evolution of amino-phenolic HLAs was illustrated. The results of ultraviolet-visible (UV-Vis) spectra of reaction mixtures associated with two-dimensional correlation spectroscopy (2D-COS) combined with the XPS spectra of N 1s content changes in HLAs demonstrated that MnO₂ induced pyrrole-type nitrogen formation and enhanced darkening. Furthermore, MnO₂ mainly acted as a catalyst, and oxygen activated the regeneration of MnO₂ by oxidizing free manganese ions, thus substantially promoting the formation and accumulation of HLAs, whereas it decreased the reaction rate of HLAs formation. Moreover, carbon dioxide release was found during the process of the formation of fulvic-like acids (FLAs), and the reaction was oxygen-independent. Additionally, the formation and transformation of products without MnO₂ do not obey kinetics equations, whereas the darkening reaction with MnO₂ followed the pseudo-second-order and pseudo-zero-order kinetics equations. These findings provide new insights into the behaviours and fate of the oxygen-mediated humification process and related reaction products.

Application of Nanotechnology in Wood-Based Products Industry: A Review

Wood-based industry is one of the main drivers of economic growth in Malaysia. Forest being the source of various lignocellulosic materials has many untapped potentials that could be exploited to produce sustainable and biodegradable nanosized material that possesses very interesting features for use in wood-based industry itself or across many different application fields. Wood-based products sector could also utilise various readily available nanomaterials to enhance the performance of existing products or to create new value added products from the forest. This review highlights recent developments in nanotechnology application in the wood-based products industry.

Characterization of synthetic dyes for environmental and forensic assessments: A chromatography and mass spectrometry approach

Dyes have become common substances since they are employed in mostly all objects surrounding our daily activities such as clothing and upholstery. Based on the usage and disposal of these objects, the transfer of the dyes to other media such as soil and water increases their prevalence in our environment. However, this prevalence could help to solve crimes and pollution problems if detection techniques are proper. For that reason, the detection and characterization of dyes in complex matrices is important to determine the possible events leading to their deposition (natural degradation, attempts of removal, possible match with evidence, among others). Currently, there are several chromatographic and mass spectrometric approaches used for the identification of these organic molecules and their derivatives with high specificity and accuracy. This review presents current chromatographic and mass spectrometric methods that are used for the detection and characterization of disperse, acid, basic, and reactive dyes, and their derivatives.

Chitosan-templated bio-coloration of cotton fabrics via laccase-catalyzed polymerization of hydroquinone

There is an increasing interest in the development of enzymatic coloration of textile fabrics as an alternative to conventional textile dyeing processes, which is successful for dyeing protein fibers. However, unmodified cotton fabrics are difficult to be dyed through enzyme catalysis due to the lack of affinity of biosynthesized dyes to cotton fibers. In order to improve the enzyme-catalyzed dyeability of cotton fibers, chitosan was used to coat cotton fabrics as template. A novel and facile bio-coloration technique using laccase catalysis of hydroquinone was developed to dye chitosan-templated cotton fabrics. The polymerization of hydroquinone with the template of chitosan under the laccase catalysis was monitored by ultraviolet-vis spectrophotometer on the absorbance of reaction solution. A significant peak of UV-vis spectrum at 246 nm corresponding to large conjugated structures appeared and increased with increasing the duration of enzymatic catalysis. The effect of different treatment conditions on the laccase-catalyzed dyeing of cotton fabric was investigated to determine their optimal parameters of laccase-catalyzed coloration. Fourier-transform infrared spectroscopy spectra demonstrated the formation of H-bond and Schiff base reaction between chitosan and polymerized hydroquinone. Scanning electron microscopy indicated that the surface of dyed cotton fiber was much rougher than that of the control sample. Moreover, X-ray photoelectron spectroscopy also revealed the existence of the chitosan/polymerized hydroquinone complex and polymerized hydroquinone on the dyed cotton fibers. This chitosan-templated approach offers possibility for biological dyeing coloration of cotton fabrics and other cellulosic materials.

Synergistic Release of Crop Nutrients and Stimulants from Hydroxyapatite Nanoparticles Functionalized with Humic Substances: Toward a Multifunctional Nanofertilizer

The use of salt- or macro-sized NPK fertilizers is typically associated with low nutrient use efficiency and water eutrophication. Nanotechnology can overcome such drawbacks, but its practical application on a large scale is limited by (i) high costs and difficult scale-up of nanoparticle synthesis, (ii) questionable advantages over traditional methods, and (iii) health hazards related to nanomaterial introduction in the food stream and the environment. Here, we report on a novel biocompatible and multifunctional P nanofertilizer obtained by self-assembling natural or synthetic humic substances and hydroxyapatite nanoparticles using a simple and straightforward dipping process, exploiting the interaction between the polyphenolic groups of humic substances and the surface of nanohydroxyapatite. Pot tests using the as-prepared materials were performed on Zea mays as a model crop, and the results were compared to those obtained using commercial fused superphosphate and bare nanohydroxyapatites. A significant improvement, in terms of early plant growth, corn productivity, rhizosphere bacteria, and the resistance to NaCl-induced abiotic stresses, was achieved using hydroxyapatite nanoparticles assembled with humic substances. These effects were ascribed to the synergistic co-release of phosphate ions and humic substances, which are two types of plant-beneficial agents for crop nutrition and stimulation, respectively. The release patterns were proven to be tunable with the amount of humic substances adsorbed on the nanoparticles, inducing competition between humic-substance-driven phosphorous dissolution and block of water contact. Such positive effects on plant growth in association with its intrinsic biocompatibility, simple synthesis, and multifunctionality qualify this novel nanofertilizer as a promising material for large-scale use in the agronomic field.

Activity of catechins and their applications

Background

Catechins, which are polyphenol compounds found in many plants and are an important component of tea leaves, are strong anti-oxidants.

Research

Many studies seek to enhance the effects of catechins on the human body and boost their protective power against UV radiation. There are many examples of the positive anti-microbial, anti-viral, anti-inflammatory, anti-allergenic, and anti-cancer effects of catechins. Catechins increase the penetration and absorption of healthy functional foods and bio cosmetics into the body and the skin, thus improving their utility. High value-added anti-oxidant substances have been extracted from food and plant sludge, and experiments have shown that catechins are safe when applied to the human body. The stability of catechins is very important for their absorption into the human body and the effectiveness of their anti-oxidant properties.

Conclusion

Continued research on the strong anti-oxidant effects of catechins is expected to result in many advances in the food, cosmetics, and pharmaceutical industries.

Thermophilic enzyme systems for efficient conversion of lignocellulose to valuable products: Structural insights and future perspectives for esterases and oxidative catalysts

Thermophilic enzyme systems are of major importance nowadays in all industrial processes due to their great performance at elevated temperatures. In the present review, an overview of the current knowledge on the properties of thermophilic and thermotolerant carbohydrate esterases and oxidative enzymes with great thermostability is provided, with respect to their potential use in biotechnological applications. A special focus is given to the lytic polysaccharide monooxygenases that are able to oxidatively cleave lignocellulose through the use of oxygen or hydrogen peroxide as co-substrate and a reducing agent as electron donor. Structural characteristics of the enzymes, including active site conformation and surface properties are discussed and correlated with their substrate specificity and thermostability properties.

Enzyme-Lignin Nanocapsules Are Sustainable Catalysts and Vehicles for the Preparation of Unique Polyvalent Bioinks

Reactive lignin nanocapsules catalyze a pigmentation reaction to furnish an innovative type of sustainable polyvalent bioink. In this nanodevice, the pigment, vehicle, binder, and additive are included in a single confined spherical space. Bioinks with different shades of color, black, gray, yellow-like, pink-like, and red/brown hues, have been prepared by selecting the reactants and the pigmentation process. Lignin nanocapsules play multiple functions in the support and activation of the enzyme necessary for the synthesis of pigments. Lignin nanocapsules protected the melanin pigment from alkaline and UV-degradation treatment.

Bifunctional in vivo role of laccase exploited in multiple biotechnological applications

Laccases are multicopper enzymes present in plants, fungi, bacteria, and insects, which catalyze oxidation reactions together with four electron reduction of oxygen to water. Plant, bacterial, and insect laccases have a polymerizing role in nature, implicated in biosynthesis of lignin, melanin formation, and cuticle hardening, respectively. On the other hand, fungal laccases carry out both polymerizing (melanin synthesis and fruit body formation) as well as depolymerizing roles (lignin degradation). This bifunctionality of fungal laccases can be attributed to the presence of multiple isoforms within the same as well as different genus and species. Interestingly, by manipulating culture conditions, these isoforms with their different induction patterns and unique biochemical characteristics can be expressed or over-expressed for a targeted biotechnological application. Consequently, laccases can be considered as one of the most important biocatalyst which can be exploited for divergent industrial applications viz. paper pulp bleaching, fiber modification, dye decolorization, bioremediation as well as organic synthesis. The present review spotlights the role of fungal laccases in various antagonistic applications, i.e., polymerizing and depolymerizing, and co-relating this dual role with potential industrial significance.

Polymers from Bamboo Extracts Produced by Laccase

A green methodology for the production of polymers from bamboo powder was investigated. The optimal conditions for the extraction of components from bamboo were defined by incubating the powder in an acetate buffer (pH 5) under boiling for 2 h. Native laccase from Myceliophthora thermophila was used afterwards to oxidize the extracts from the final resulting extraction liquid. The reduction of the free OH content after enzymatic oxidation, as well as the ¹H NMR data, confirmed the efficient polymerization of the extracts. The bamboo powder samples were also subjected to high compression and curing, in the absence and in the presence of laccase, to evaluate the hardness of the tablets formed by enzymatic bonding events. The results revealed a higher hardness when the tablets were produced in the presence of laccase, confirming the role of the catalyst on the precipitation of colloidal lignin and phenolic extractives. Herein we produce new oligomers/polymers by laccase oxidation of the extracts resulting from a clean method boiling. At the same time, the data open up new routes for the exploitation of new lignocellulosic materials by the direct application of the enzyme on the bamboo powder material.

An alkaline bacterial laccase for polymerization of natural precursors for hair dye synthesis

In the present study, an extracellular alkali stable laccase (Lac DS) from Bacillus subtilis DS which has pH optima at 8.5 using p-phenylenediamine (PPD) as substrate has been reported. Lac DS retained 70% activity for 4 h at pH 8.5 and 90% activity for 24 h at 55 °C. The enzyme yield was enhanced by optimization of fermentation conditions. A 746-fold increase in yield was observed under optimized conditions using 150 µM MgSO₄, 1.2% yeast extract, 0.35% tryptone, and 150 µM vanillic acid. Lac DS was used to polymerize natural dye precursor catechol, pyrogallol, syringaldehyde, syringic acid, ferulic acid and gallic acid to develop a range of natural hair colors such as black, golden yellow, and reddish brown. The results indicate that alkaline Lac DS is a suitable candidate to develop a user-friendly and commercially applicable hair dyeing process in the area of cosmetic industry.

Laccase-Mediated Grafting on Biopolymers and Synthetic Polymers: A Critical Review

Laccase-mediated grafting on lignocelluloses has gained considerable attention as an environmentally benign method to covalently modify wood, paper and cork. In recent decades this technique has also been employed to modify fibres with a polysaccharide backbone, such as cellulose or chitosan, to infer colouration, antimicrobial activity or antioxidant activity to the material. The scope of this approach has been further widened by researchers, who apply mediators or high redox potential laccases and those that modify synthetic polymers and proteins. In all cases, the methodology relies on one- or two-electron oxidation of the surface functional groups or of the graftable molecule in solution. However, similar results can very often be achieved through simple deposition, even after extensive washing. This unintended adsorption of the active substance could have an adverse effect on the durability of the applied coating. Differentiating between actual covalent binding and adsorption is therefore essential, but proves to be challenging. This review not only covers excellent research on the topic of laccase-mediated grafting over the last five to ten years, but also provides a critical comparison to highlight either the lack or presence of compelling evidence for covalent grafting.

Preparation of Biocolorant and Eco-Dyeing Derived from Polyphenols Based on Laccase-Catalyzed Oxidative Polymerization

Natural products have been believed to be a promising source to obtain ecological dyes and pigments. Plant polyphenol is a kind of significant natural compound, and tea provides a rich source of polyphenols. In this study, biocolorant derived from phenolic compounds was generated based on laccase-catalyzed oxidative polymerization, and eco-dyeing of silk and wool fabrics with pigments derived from tea was investigated under the influence of pH variation. This work demonstrated that the dyeing property was better under acidic conditions compared to alkalinity, and fixation rate was the best when pH value was 3. Furthermore, breaking strength of dyed fabrics sharply reduced under the condition of pH 11. Eventually, the dyeing method was an eco-friendly process, which was based on bioconversion, and no mordant was added during the process of dyeing.

Laccase: a green catalyst for the biosynthesis of poly-phenols

Laccases (benzene diol: oxidoreductases, EC 1.10.3.2) are able to catalyze the oxidation of various compounds containing phenolic and aniline structures using dissolved oxygen in water. Laccase structural features and catalytic mechanisms focused on the polymerization of aromatic compounds are reported. A description about the most recent research on the biosynthesis of chemicals and polymers is made. Selected applications of this technology are considered as well as the advantages, shortcomings and future needs related with the use of laccases.

Fungal Laccase-Catalyzed Oxidation of Naturally Occurring Phenols for Enhanced Germination and Salt Tolerance of Arabidopsis thaliana: A Green Route for Synthesizing Humic-like Fertilizers

Fungal laccases have been highlighted as a catalytic tool for transforming phenols. Here we demonstrate that fungal laccase-catalyzed oxidations can transform naturally occurring phenols into plant fertilizers with properties very similar to those of commercial humic acids. Treatments of Arabidopsis thaliana with highly cross-linked polyphenolic products obtained from a mixture of catechol and vanillic acid were able to enhance the germination and salt tolerance of this plant. These results revealed that humic-like organic fertilizers can be produced via in vitro enzymatic oxidation reactions. In particular, the root elongation pattern resulting from the laccase products was comparable to that resulting from an auxin-like compound. A detailed structural comparison of the phenol variants and commercial humic acids revealed their similarities and differences. Analyses based on SEM, EFM, ERP, and zeta-potential measurement showed that they both formed globular granules bearing various hydrophilic/polar groups in aqueous and solid conditions. Solid-phase ¹³C NMR, FT-IR-ATR, and elemental analyses showed that more nitrogen-based functional and aliphatic groups were present in the commercial humic acids. Significant differences were also identifiable with respect to particle size and specific surface area. High-resolution (15 T) FT-ICR mass spectrometry-based van Krevelen diagrams showed the compositional features of the variants to be a subset of those of the humic acids. Overall, our study unraveled essential structural features of polyaromatics that affect the growth of plants, and also provided novel bottom-up ecofriendly and finely tunable pathways for synthesizing humic-like fertilizers.

Synthesis of Plant Phenol-derived Polymeric Dyes for Direct or Mordant-based Hair Dyeing

Effective hair dyeing through in situ incubation of keratin hair with the products of fungal laccase-catalyzed polymerization of plant phenols has been previously demonstrated. However, the dyeing process takes a long time to complete compared to commercial hair-dyeing products. To overcome this bottleneck, pre-synthesized polymeric products of the oxidative reaction of Trametes versicolor laccase on catechin and catechol, either with or without mordant agents (e.g., FeSO4), were here employed to achieve permanent keratin hair dyeing in various colors and shades. The laccase action in acidic sodium acetate buffer led to a deep black coloration after coupling reactions between the plant phenols. The colored dye products were then desalted and concentrated with ultrafiltration. The dyes, with or without mordant agents, caused a significant increase in ΔE values (i.e., color difference value) in gray human hair within 2.5 hours. In addition, different keratin colors and shades were induced depending upon the mordanting and pH changes. The dyed hair also exhibited a strong resistance to detergent treatments, indicating that our methods can give rise to permanent hair dyeing. Overall, our work has provided novel insight into developing eco-friendly hair-dyeing methods as alternatives to commercial toxic diamine-based dyes.

Dihydroxynaphthalene-based mimicry of fungal melanogenesis for multifunctional coatings

Material-independent adhesive action derived from polycatechol structures has been intensively studied due to its high applicability in surface engineering. Here, we for the first time demonstrate that a dihydroxynaphthalene-based fungal melanin mimetic, which exhibit a catechol-free structure, can act as a coating agent for material-independent surface modifications on the nanoscale. This mimetic was made by using laccase to catalyse the oxidative polymerization of specifically 2,7-dihydroxynaphthalene. Analyses of the product of this reaction, using Fourier transform infrared-attenuated total reflectance and X-ray photoelectron spectroscopy, bactericidal action, charge-dependent sorption behaviour, phenol content, Zeta potential measurements and free radical scavenging activity, yielded results consistent with it containing hydroxyphenyl groups. Moreover, nuclear magnetic resonance analyses of the product revealed that C-O coupling and C-C coupling were the main mechanisms for its synthesis, thus clearly excluding a catechol structure in the polymerization. This product, termed poly(2,7-DHN), was successfully deposited onto a wide variety of solid surfaces, including metals, polymeric materials, ceramics, biosurfaces and mineral complexes. The melanin-like polymerization could be used to co-immobilize other organic molecules, forming functional surfaces. In addition, the hydroxyphenyl group contained in the coated poly(2,7-DHN) induced secondary metal chelation/reduction and adhesion with proteins, suggesting the potential of this poly(2,7-DHN) layer to serve as a platform material for a variety of surface engineering applications. Moreover, the novel physicochemical properties of the poly(2,7-DHN) illuminate its potential applications as bactericidal, radical-scavenging and pollutant-sorbing agents.

Bioconversion of Biomass-Derived Phenols Catalyzed by Myceliophthora thermophila Laccase

Biomass-derived phenols have recently arisen as an attractive alternative for building blocks to be used in synthetic applications, due to their widespread availability as an abundant renewable resource. In the present paper, commercial laccase from the thermophilic fungus Myceliophthora thermophila was used to bioconvert phenol monomers, namely catechol, pyrogallol and gallic acid in water. The resulting products from catechol and gallic acid were polymers that were partially characterized in respect to their optical and thermal properties, and their average molecular weight was estimated via solution viscosity measurements and GPC. FT-IR and ¹H-NMR data suggest that phenol monomers are connected with ether or C–C bonds depending on the starting monomer, while the achieved molecular weight of polycatechol is found higher than the corresponding poly(gallic acid). On the other hand, under the same condition, pyrogallol was dimerized in a pure red crystalline compound and its structure was confirmed by ¹H-NMR as purpurogallin. The herein studied green synthesis of enzymatically synthesized phenol polymers or biological active compounds could be exploited as an alternative synthetic route targeting a variety of applications.

Laccase-mediated synthesis of a phenoxazine compound with antioxidative and dyeing properties--the optimisation process

This study demonstrates the optimisation of the main parameters of the laccase-mediated biosynthesis of high-intensity-coloured orange phenoxazine compound, 2-amino-3-oxo-3H-phenoxazine-8-sulfonic acid, and the antioxidative and dyeing properties. Among optimised parameters were the pH value, the activity of laccase, and the high concentration of the precursor as the necessary step in terms of dye synthesis scale-up. The high concentration of the precursor of ca. 10 g/L can be transformed totally by laccase at the activity of 30 U/g during 12 hours, in an optimised and standardised process in nearly 100% yield of synthesis. The obtained dye exhibited good dyeing properties determined according to the ISO standards. Antioxidative activities were detected for phenoxazinone dye using two independent methods, the chemiluminescence assay and the ABTS free radical-scavenging test, with the values of EC50 for the tested phenoxazine dye amounting 189.8 μg/mL and 1428 μg/mL, respectively. Despite the presence of the phenoxazine core in the structure of this dye, no antibacterial capacity was noted.

How to enjoy laccases

An analysis of the scientific literature published in the last 10 years reveals a constant growth of laccase applicative research in several industrial fields followed by the publication of a great number of patents. The Green Chemistry journal devoted the cover of its September 2014 issue to a laccase as greener alternative for chemical oxidation. This indicates that laccase "never-ending story" has found a new promising trend within the constant search for efficient (bio)catalysts able to meet the 12 green chemistry principles. A survey of ancient and cutting-edge uses of laccase in different industrial sectors is offered in this review with the aim both to underline their potential and to provide inspiration for new ones. Applications in textile and food fields have been deeply described, as well as examples concerning polymer synthesis and laccase-catalysed grafting. Recent applications in pharmaceutical and cosmetic industry have also been reviewed.

Characterization of the factors that influence sinapine concentration in rapeseed meal during fermentation

We analyzed and compared the difference in sinapine concentration in rapeseed meal between the filamentous fungus, Trametes sp 48424, and the yeast, Saccharomyces cerevisiae, in both liquid and solid-state fermentation. During liquid and solid-state fermentation by Trametes sp 48424, the sinapine concentration decreased significantly. In contrast, the liquid and solid-state fermentation process by Saccharomyces cerevisiae just slightly decreased the sinapine concentration (P ≤ 0.05). After the solid-state fermented samples were dried, the concentration of sinapine in rapeseed meal decreased significantly in Saccharomyces cerevisiae. Based on the measurement of laccase activity, we observed that laccase induced the decrease in the concentration of sinapine during fermentation with Trametes sp 48424. In order to eliminate the influence of microorganisms and the metabolites produced during fermentation, high moisture rapeseed meal and the original rapeseed meal were dried at 90°C and 105°C, respectively. During drying, the concentration of sinapine in high moisture rapeseed meal decreased rapidly and we obtained a high correlation coefficient between the concentration of sinapine and loss of moisture. Our results suggest that drying and enzymes, especially laccase that is produced during the solid-state fermentation process, may be the main factors that affect the concentration of sinapine in rapeseed meal.

A new biobleaching sequence for kenaf pulp: influence of the chemical nature of the mediator and thermogravimetric analysis of the pulp

This paper evaluates five phenolic compounds as mediators for kenaf pulp biobleaching by laccase. The results have been compared with the treatment using a non-phenolic mediator, 1-hydroxybenzotriole and laccase alone. The influence of the nature of the chemical mediators used on various pulp properties is discussed. In addition to oxidizing lignin, the phenolic radicals formed in the process take part in condensation and grafting reactions in enzymatic stage. After biobleaching sequence (LP), syringaldehyde was shown to be the best phenolic mediator, allowing a delignification of 43% and 72% ISO brightness. These results were similar to the use of laccase alone due to the role as mediators of syringyl units resulting from oxidative lignin degradation. As a novelty, the study was supplemented with thermogravimetric analysis, with emphasis on the crystallinity degree of the cellulose surface and the aim of elucidating the action mechanisms of laccase-mediator systems on fiber.

Permanent hair dye-incorporated hyaluronic acid nanoparticles

We prepared p-phenylenediamine (PDA)-incorporated nanoparticles using hyaluronic acid (HA). PDA-incorporated HA nanoparticles have spherical shapes and sizes were less than 300 nm. The results of FT-IR spectra indicated that PDA-incorporated HA nanoparticles were formed by ion-complex formation between amine group of PDA and carboxyl group of HA. Furthermore, powder-X-ray diffractogram (XRD) measurement showed that intrinsic crystalline peak of PDA disappeared by formation of nanoparticle with HA at XRD measurement. These results indicated that PDA-incorporated HA nanoparticles were formed by ion-complex formation. At drug release study, the higher PDA contents induced faster release rate from nanoparticles. PDA-incorporated nanoparticles showed reduced intrinsic toxicity against HaCaT human keratinocyte cells at MTT assay and apoptosis assay. We suggest that PDA-incorporated HA nanoparticles are promising candidates for novel permanent hair dye.

Investigating the structure-effect relationships of various natural phenols used as laccase mediators in the biobleaching of kenaf and sisal pulps

Nine phenol derivatives, p-coumaric acid (PC), vanillin (V), acetovanillone (AV), acetosyringone (AS), syringaldehyde (SA), coniferaldehyde (CLD), ferulic acid (FRC), sinapic acid (SNC), and sinapyl aldehyde (SLD) were assayed as laccase redox mediators in the biobleaching of kenaf and sisal pulps. As a general behaviour, the phenolic mediators increased the kappa number (KN) and reduced the brightness of pulps. In particular, these changes were found to depend in a linear manner on the energy of the highest occupied molecular orbital (E(HOMO)) of the mediators. The phenolic mediator with the lowest E(HOMO) (PC) led to the highest increase of KN and the lowest reduction of brightness. On the contrary, syringyl derivatives (i.e. SA) with high E(HOMO) values caused small KN increases and significant losses of brightness. This behaviour was explained on the basis of a competition between grafting and polymerisation processes. The former basically affects KN, whereas the latter affects pulp brightness.

Microbial renewable feedstock utilization: a substrate-oriented approach

Increasingly lignocellulosic biomass hydrolysates are used as the feedstock for industrial fermentations. These biomass hydrolysates consist of complex mixtures of different fermentable sugars, but also contain inhibitors and salts that affect the performance of the product-generating microbes. The performance of six industrially relevant microorganisms, i.e., two bacteria (Escherichia coli and Corynebacterium glutamicum), two yeasts (Saccharomyces cerevisiae and Pichia stipitis) and two fungi (Aspergillus niger and Trichoderma reesei) were compared for their ability to utilize and grow on different feedstock hydrolysates (corn stover, wheat straw, sugar cane bagasse and willow wood). Moreover, the ability of the selected hosts to utilize waste glycerol from the biodiesel industry was evaluated. P. stipitis and A. niger were found to be the most versatile and C. glutamicum, and S. cerevisiae were shown to be the least adapted to renewable feedstocks. Clear differences in the utilization of the more abundant carbon sources in these feedstocks were observed between the different species. Moreover, in a species-specific way the production of various metabolites, in particular polyols, alcohols and organic acids was observed during fermentation. Based on the results obtained we conclude that a substrate-oriented instead of the more commonly used product oriented approach towards the selection of a microbial production host will avoid the requirement for extensive metabolic engineering. Instead of introducing multiple substrate utilization and detoxification routes to efficiently utilize lignocellulosic hydrolysates only one biosynthesis route forming the product of interest has to be engineered.

Structure/redox potential relationship of simple organic compounds as potential precursors of dyes for laccase-mediated transformation

The aim of this study was to examine the ability of an extracellular fungal laccase (LAC) to form colored products from simple non-colored organic precursors. Thirty different phenolic and non-phenolic precursors (o-, m-, and p-methoxy-, hydroxy-, sulfonic-, and amino-substituted) were tested as single and coupled substrates in a LAC-catalyzed oxidation. The findings show that LAC catalyzes the formation of colored products (from yellow/brown to red and blue) by oxidation of single substrates that are benzene derivatives containing at least two substituents comprised of amino, hydroxy, and methoxy groups. All precursors were tested by cyclic voltammetry and the correlation between their structure and redox potential, and the possibility of their transformation into colored products by fungal LAC was found. Colored products were yielded from single substrates possessing a value of the oxidation peak (E(o)) lower than 1,150 mV vs. normal hydrogen electrode (NHE). Substrates with an oxidation peak higher than 1,150 mV vs. NHE were transformed by LAC into colored compounds only in the presence of an additional precursor characterized by a low value of E(o) and the presence of reactive substituents such as methoxy, hydroxy, and amino groups. Therefore, additional hydroxylation, methoxylation, and amination of phenolic and non-phenolic substrates may represent a strategy to increase the range of these compounds as potential dyes precursors.

Laccase-catalysed oxidations of naturally occurring phenols: from in vivo biosynthetic pathways to green synthetic applications

Laccases are oxidases that contain several copper atoms, and catalyse single-electron oxidations of phenolic compounds with concomitant reduction of oxygen to water. The enzymes are particularly widespread in ligninolytic basidiomycetes, but also occur in certain prokaryotes, insects and plants. Depending on the species, laccases are involved in various biosynthetic processes contributing to carbon recycling in land ecosystems and the morphogenesis of biomatrices, wherein low-molecular-weight naturally occurring phenols serve as key enzyme substrates. Studies of these in vivo synthetic pathways have afforded new insights into fungal laccase applicability in green synthetic chemistry. Thus, we here review fungal laccase-catalysed oxidations of naturally occurring phenols that are particularly relevant to the synthesis of fine organic chemicals, and we discuss how the discovered synthetic strategies mimic laccase-involved in vivo pathways, thus enhancing the green nature of such reactions. Laccase-catalysed in vivo processes yield several types of biopolymers, including those of cuticles, lignin, polyflavonoids, humus and the melanin pigments, using natural mono- or poly-phenols as building blocks. The in vivo synthetic pathways involve either phenoxyl radical-mediated coupling or cross-linking reactions, and can be adapted to the design of in vitro oxidative processes involving fungal laccases in organic synthesis; the laccase substrates and the synthetic mechanisms reflect in vivo processes. Notably, such in vitro synthetic pathways can also reproduce physicochemical properties (e.g. those of chromophores, and radical-scavenging, hydration and antimicrobial activities) found in natural biomaterials. Careful study of laccase-associated in vivo metabolic pathways has been rewarded by the discovery of novel green applications for fungal laccases. This review comprehensively summarizes the available data on laccase-catalysed biosynthetic pathways and associated applications in fine chemical syntheses.