Artificial skin in perspective: concepts and applications

Impact of blue light on cutaneous barrier structures and properties: NPLC/HR-MSn and Raman analyses

Skin health relies heavily on a well-maintained cutaneous barrier. While the detrimental effects of UV radiation on the epidermis are established, the impact of blue light, a significant component of sunlight and artificial sources, is less clear. This study aims to explore blue light's influence on the reconstructed human epidermis (RHE) using two complementary analytical approaches: Raman microspectroscopy and normal phase liquid chromatography coupled with high-resolution mass spectrometry (NPLC/HR-MSn). RHE samples were exposed to blue light (415 nm and 455 nm) during different stages of their maturation. Raman spectra were acquired for both irradiated and non-irradiated (control) samples. Raman descriptors were analyzed to assess potential alterations in the structural organization of proteins and lipids' conformational changes. Additionally, lipids from RHE samples were extracted and analyzed using NPLC/HR-MSn. Blue light exposure led to changes in the structural organization of RHE lipids and proteins, as well as changes in the lipid composition. These changes varied depending on the wavelength and exposure dose. Exposure to blue light could disrupt the integrity of the skin's protective barrier, leading to increased sensitivity to environmental stressors and potential skin damage.

A review of artificial sebum formulations, their compositions, uses and physicochemical characteristics

Sebum is a complex mixture of skin lipids responsible for lubrication, moisture retention and skin protection from external factors such as bacteria and fungi. The physicochemical properties of natural sebum are not well understood and are not easily accessible. Artificial sebum is widely used for sebum-related research such as dermal bioaccessibility, fingerprint production, dermatology, removal and sebum studies. It was found that the composition of artificial sebum affects the bioaccessibility of metals and drugs as well as the growth of some strains of bacteria. Squalene present in sebum was also found to be responsible for creating yellow stains on fabrics, whereas an increased concentration of fatty acids and triglycerides can lead to higher malodour of fabrics. Moreover, sebum and artificial sebum are poorly characterized with only 20 of 81 formulations characterized by certain techniques such as differential scanning calorimetry, nuclear magnetic resonance and thin-layer chromatography. This article reviews the artificial sebum formulations reported in the open literature between 1965 and 2023. We have discussed the compositions, uses and characterization techniques of artificial sebum used in the previous work and compared their properties to those of human sebum. A total of 81 artificial sebum formulations were found across the literature with 17 new formulations identified. The artificial sebum composition varies greatly between publications and there is no consistent formulation. There is a wide range of chemicals that are used as the main components of artificial sebum. We have highlighted the effect of chemical composition and individual compounds on the overall properties of the artificial sebum reported, and recommend that there is a great potential for creating personalized cosmetics and home care products once the characteristics of sebum are better understood.

Effect of Saponin on Methylene Blue (MB) Photo-Antimicrobial Activity Against Planktonic and Biofilm Form of Bacteria

Bacterial resistance has led to the spread of bacterial infections such as chronic wound infections. Finding solutions for combating resistant bacteria in chronic wounds such as Staphylococcus aureus and Pseudomonas aeruginosa became an attractive theme among researchers. P. aeruginosa is a gram negative opportunistic human pathogenic bacterium that is difficult to treat due to its high resistance to antibiotics. S. aureus (gram negative bacterium) also has a high antibiotic resistance, so that it is resistant to vancomycin (VRSA), tetracycline, fluoroquinolones and beta-lactam antibiotics including penicillin and methicillin (MRSA). In particular, S. aureus and P. aeruginosa have intrinsic and acquired antibiotic resistance, making the clinical management of infection a real challenge, especially in patients with comorbidities. aPDT can be proposed as a new method in the treatment of multi-drug resistant bacteria in chronic wound infection conditions. In this study, the effect of saponin (100 μg/mL) on photodynamic inactivation on planktonic and biofilm forms of P. aeruginosa (ATCC 27853) and S. aureus (ATCC 25923) strains and on Human Dermal Fibroblast (HDF) cells was investigated. Methylene blue (MB) was used as photosensitizer (0, 10, 50, 100 μg/mL). The light source was a red LED source (660 nm; power density: 20 mW/cm2) which is related to the maximum absorption of MB. The results showed that the use of saponin in combination with MB-aPDT (Methylene Blue-antibacterial photodynamic therapy) reduces the phototoxic activity of MB due to decreasing the monomer form of MB. This result was obtained by spectrophotometric study. Also, the result of MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide) assay showed that 8 min of irradiation (660 nm) at 10 μg/mL concentration of alone MB had the lowest phototoxic effect on HDF cells. Due to reduced phototoxic properties of MB in this method, detergents containing saponins not recommended to applied at the same time with MB-aPDT in wound infection area.

Research progress in the development of 3D skin models and their application to in vitro skin irritation testing

Toxicological assessment of chemicals is crucial for safeguarding human health and the environment. However, traditional animal experiments are associated with ethical, technical, and predictive limitations in assessing the toxicity of chemicals to the skin. With the recent development of bioengineering and tissue engineering, three-dimensional (3D) skin models have been commonly used as an alternative for toxicological studies. The skin consists of the subcutaneous, dermis, and epidermis. All these layers have crucial functions such as physical and biological protection and thermoregulation. The epidermis is the shallowest layer protecting against external substances and media. Because the skin is the first contact point for many substances, this organ is very significant for assessing local toxicity following skin exposure. According to the classification of the United Nations Global Harmonized System, skin irritation is a major potentially hazardous characteristic of chemicals, and this characteristic must be accurately assessed and classified for enhancing chemical safety management and preventing and reducing chemical accidents. This review discusses the research progress of 3D skin models and introduces their application in assessing chemical skin irritation.

Ideal Living Skin Equivalents, From Old Technologies and Models to Advanced Ones: The Prospects for an Integrated Approach

The development of technologies for the generation and transplantation of living skin equivalents (LSEs) is a significant area of translational medicine. Such functional equivalents can be used to model and study the morphogenesis of the skin and its derivatives, to test drugs, and to improve the healing of chronic wounds, burns, and other skin injuries. The evolution of LSEs over the past 50 years has demonstrated the leap in technology and quality and the shift from classical full-thickness LSEs to principled new models, including modification of classical models and skin organoids with skin derived from human-induced pluripotent stem cells (iPSCs) (hiPSCs). Modern methods and approaches make it possible to create LSEs that successfully mimic native skin, including derivatives such as hair follicles (HFs), sebaceous and sweat glands, blood vessels, melanocytes, and nerve cells. New technologies such as 3D and 4D bioprinting, microfluidic systems, and genetic modification enable achievement of new goals, cost reductions, and the scaled-up production of LSEs.

Peroxiredoxin-2 represses NRAS-mutated melanoma cells invasion by modulating EMT markers

The second most common mutation in melanoma occurs in NRAS oncogene, being a more aggressive disease that has no effective approved treatment. Besides, cellular plasticity limits better outcomes of the advanced and therapy-resistant patients. Peroxiredoxins (PRDXs) control cellular processes through direct hydrogen peroxide oxidation or by redox-relaying processes. Here, we demonstrated that PRDX2 could act as a modulator of multiple EMT markers in NRAS-mutated melanomas. PRDX2 knockdown lead to phenotypic changes towards invasion in human reconstructed skin and the treatment with a PRDX mimetic (gliotoxin), decreased migration in PRDX2-deficient cells. We also confirmed the favorable clinical outcome of patients expressing PRDX2 in a large primary melanoma cohort. This study contributes to our knowledge about genes involved in phenotype switching and opens a new perspective for PRDX2 as a biomarker and target in NRAS-mutated melanomas.

Prevention of UVB-Induced Photoaging by an Ethyl Acetate Fraction from Allomyrina dichotoma Larvae and Its Potential Mechanisms in Human Dermal Fibroblasts

Allomyrina dichotoma larvae (ADL) is an insect type that is used ethnopharmacologically to treat various diseases; however, its use as an antiaging treatment has not been widely studied. Previously, we found that an ethyl acetate (EA) fraction derived from an ADL extract (ADLE) has a high polyphenol content and antioxidant properties. In this study, we identified the underlying molecular mechanism for the protective effect of the EA fraction against UVB-induced photodamage in vitro and ex vivo. UVB treatment increased intracellular reactive oxygen species levels and DNA damage; the latter of which was significantly decreased following cotreatment with the EA fraction. Biological markers of aging, such as p16INK4a, p21WAF1, and senescence-associated β-gal levels, were induced by UVB treatment but significantly suppressed following EA-fraction treatment. UVB-induced upregulation of matrix metalloproteinase (MMP)-1 and downregulation of COL1A1 were also reversed by EA-fraction treatment in both cells and a 3D skin model, which resulted in increased keratin and collagen deposition. Moreover, EA-fraction treatment inhibited the phosphorylation of MAPKs (p38, ERK, and JNK) and nuclear factor (NF-)-kB and decreased the levels of inflammatory cytokines in UVB-treated cells. The results indicate that an EA fraction from ADLE ameliorates UVB-induced degradation of COL1A1 by inhibiting MMP expression and inactivating the MAPK/NF-κB p65/AP-1 signaling pathway involved in this process.

Not all marketed skin cleansers' pH is optimal for atopic dermatitis

Background: The normally acidic skin pH changes in atopic dermatitis (AD) to alkaline, which contributes to the associated skin-barrier dysfunction. Hence, acidic cleansers would be preferred, but such information is scarce. Objective: Guiding health-care providers and patients on selecting skin cleansers with a pH optimal for AD. Methods: A total of 250 products were tested: 37 soaps (32 bars, 5 liquid) and 213 syndets (14 bars, 199 liquid); 10% solutions were tested for pH by using a pH meter; pH values 6.65-7.35 were considered neutral. Results: The pH of the tested skin cleansers varied widely (3.59-10.83). All 37 soaps were highly alkaline. In the 14 syndet bars, the pH was neutral in 6, alkaline in 8, and acidic in none. In the 199 syndet liquids, the pH was acidic in 84.9%, neutral in 11.1%, and alkaline in 4.0%. The product's pH was disclosed in none of the 37 soaps and in only 32 syndets (15%) , of which 9 bars were labeled "balanced," whose measured pH was neutral in 6 and alkaline in 3. Of the other 23 syndets, the labeled pH was referred to as "balanced" in 20 whose measured pH was neutral in 2 (6.80, 6.88) and acidic in 18 (3.59-6.59). The pH in the other three syndets was 4.25-6.00. Conclusion: All tested soaps had undesirable pH, whereas 84.9% of the liquid syndets were acidic (which is desirable) and 11.1% were neutral (which could be acceptable). Only 12.8% of the products disclosed the pH, an issue in need of improvement.

Patient-derived melanoma models

Melanoma is a very aggressive, rapidly metastasizing tumor that has been studied intensively in the past regarding the underlying genetic and molecular mechanisms. More recently developed treatment modalities have improved response rates and overall survival of patients. However, the majority of patients suffer from secondary treatment resistance, which requires in depth analyses of the underlying mechanisms. Here, melanoma models based on patients-derived material may play an important role. Consequently, a plethora of different experimental techniques have been developed in the past years. Among these are 3D and 4D culture techniques, organotypic skin reconstructs, melanoma-on-chip models and patient-derived xenografts, Every technique has its own strengths but also weaknesses regarding throughput, reproducibility, and reflection of the human situation. Here, we provide a comprehensive overview of currently used techniques and discuss their use in different experimental settings.

Artificial keloid skin models: understanding the pathophysiological mechanisms and application in therapeutic studies

Keloid is a type of scar formed by the overexpression of extracellular matrix substances from fibroblasts following inflammation after trauma. The existing keloid treatment methods include drug injection, surgical intervention, light exposure, cryotherapy, etc. However, these methods have limitations such as recurrence, low treatment efficacy, and side effects. Consequently, studies are being conducted on the treatment of keloids from the perspective of inflammatory mechanisms. In this study, keloid models are created to understand inflammatory mechanisms and explore treatment methods to address them. While previous studies have used animal models with gene mutations, chemical treatments, and keloid tissue transplantation, there are limitations in fully reproducing the characteristics of keloids unique to humans, and ethical issues related to animal welfare pose additional challenges. Consequently, studies are underway to create in vitro artificial skin models to simulate keloid disease and apply them to the development of treatments for skin diseases. In particular, herein, scaffold technologies that implement three-dimensional (3D) full-thickness keloid models are introduced to enhance mechanical properties as well as biological properties of tissues, such as cell proliferation, differentiation, and cellular interactions. It is anticipated that applying these technologies to the production of artificial skin for keloid simulation could contribute to the development of inflammatory keloid treatment techniques in the future.

Transdermal Properties of Cell-Penetrating Peptides: Applications and Skin Penetration Mechanisms

Cell-penetrating peptides (CPPs) consist of 5-30 amino acids with intracellular transduction abilities and diverse physicochemical properties, origins, and sequences. Although recent developments in bioinformatics have facilitated the prediction of CPP candidates with the potential for transduction into cells, the mechanisms by which CPPs penetrate cells and various tissues have not yet been elucidated at the molecular interaction level. Recently, the skin-penetrating ability of CPPs has gained wide attention and emerged as a simple and effective strategy for the delivery of macromolecules into the skin. Studies on the skin structure have suggested that the penetration potential of CPPs is based on the molecular interactions and characteristics of the lipid lamellar structure between corneocytes in the stratum corneum. This review provides a brief overview of the general properties, transduction mechanisms, applications, and safety issues of CPPs, focusing on CPPs with transdermal properties, that are currently being used to develop therapeutics and cosmetics.

3D human foreskin model for testing topical formulations of sildenafil citrate

Sildenafil citrate is an approved drug used for the treatment of erectile dysfunction and premature ejaculation. Despite a widespread application, sildenafil citrate shows numerous adverse cardiovascular effects in high-risk patients. Local transdermal drug delivery of this drug is therefore being explored as an interesting and noninvasive alternative administration method that avoids adverse effects arised from peak plasma drug concentrations. Although human and animal skin represents the most reliable models to perform penetration studies, they involve a series of ethical issues and restrictions. For these reasons new in vitro approaches based on artificially reconstructed human skin or "human skin equivalents" are being developed as possible alternatives for transdermal testing. There is little information, however, on the efficiency of such new in vitro methods on cutaneous penetration of active ingredients. The objective of the current study was to investigate the sildenafil citrate loaded in three commercial transdermal vehicles using 3D full-thickness skin equivalent and compare the results with the permeability experiments using porcine skin. Our results demonstrated that, while the formulation plays an imperative role in an appropriate dermal uptake of sildenafil citrate, the D coefficient results obtained by using the 3D skin equivalent are comparable to those obtained by using the porcine skin when a simple drug suspension is applied (1.17 × 10-10 ± 0.92 × 10-10 cm2/s vs 3.5 × 102 ± 3.3 × 102 cm2/s), suggesting that in such case, this 3D skin model can be a valid alternative for ex-vivo skin absorption experiments.

Stem Cells and Nanofibers for Skin Regeneration and Wound Healing

Stem cells have been attractive targets for tissue regeneration due to their inherent ability to differentiate into various specialized cell types; however, efforts for stem cell transplantation for the treatment of degenerated tissues have been hampered by the propensity of some stem cell types to form teratomas and the lessened viability of stem cells after transplantation. These disadvantages can be prevented using tailored extracellular matrix-like materials that can be used as an aid for the transplantation of stem cells. Nanomaterials, in particular nanofibers, have great potential to be used as extracellular matrix-like materials for this purpose. In this article, we will review the use of stem cells and nanofibers for skin regeneration and wound healing.

Applications of Engineered Skin Tissue for Cosmetic Component and Toxicology Detection

The scale of the cosmetic market is increasing every day. There are many safety risks to cosmetics, but they benefit people at the same time. The skin can become red, swollen, itchy, chronically toxic, and senescent due to the misuse of cosmetics, triggering skin injuries, with contact dermatitis being the most common. Therefore, there is an urgent need for a system that can scientifically and rationally detect the composition and perform a toxicological assessment of cosmetic products. Traditional detection methods rely on instrumentation and method selection, which are less sensitive and more complex to perform. Engineered skin tissue has emerged with the advent of tissue engineering technology as an emerging bioengineering technology. The ideal engineered skin tissue is the basis for building good in vitro structures and physiological functions in this field. This review introduces the existing cosmetic testing and toxicological evaluation methods, the current development status, and the types and characteristics of engineered skin tissue. The application of engineered skin tissue in the field of cosmetic composition detection and toxicological evaluation, as well as the different types of tissue engineering scaffold materials and three-dimensional (3D) organoid preparation approaches, is highlighted in this review to provide methods and ideas for constructing the next engineered skin tissue for cosmetic raw material component analysis and toxicological evaluation.

Cellulosic Textiles-An Appealing Trend for Different Pharmaceutical Applications

Cellulose, the most abundant biopolymer in nature, is derived from various sources. The production of pharmaceutical textiles based on cellulose represents a growing sector. In medicated textiles, textile and pharmaceutical sciences are integrated to develop new healthcare approaches aiming to improve patient compliance. Through the possibility of cellulose functionalization, pharmaceutical textiles can broaden the applications of cellulose in the biomedical field. This narrative review aims to illustrate both the methods of extraction and preparation of cellulose fibers, with a particular focus on nanocellulose, and diverse pharmaceutical applications like tissue restoration and antimicrobial, antiviral, and wound healing applications. Additionally, the merging between fabricated cellulosic textiles with drugs, metal nanoparticles, and plant-derived and synthetic materials are also illustrated. Moreover, new emerging technologies and the use of smart medicated textiles (3D and 4D cellulosic textiles) are not far from those within the review scope. In each section, the review outlines some of the limitations in the use of cellulose textiles, indicating scientific research that provides significant contributions to overcome them. This review also points out the faced challenges and possible solutions in a trial to present an overview on all issues related to the use of cellulose for the production of pharmaceutical textiles.

Multiphysics Simulation of Local Transport and Absorption Coupled with Pharmacokinetic Modeling of Systemic Exposure of Subcutaneously Injected Drug Solution

INTRODUCTION

Subcutaneous (SC) injectables have become more acceptable and feasible for administration of biologics and small molecules. However, efficient development of these products is limited to costly and time-consuming techniques, partially because absorption mechanisms and kinetics at the local site of injection remain poorly understood.

OBJECTIVE

To bridge formulation critical quality attributes (CQA) of injectables with local physiological conditions to predict systemic exposure of these products.

METHODOLOGY

We have previously developed a multiscale, multiphysics computational model to simulate lymphatic absorption and whole-body pharmacokinetics of monoclonal antibodies. The same simulation framework was applied in this study to compute the capillary absorption of solubilized small molecule drugs that are injected subcutaneously. Sensitivity analyses were conducted to probe the impact by key simulation parameters on the local and systemic exposures.

RESULTS

This framework was capable of determining which parameters had the biggest impact on small molecule absorption in the SC. Particularly, membrane permeability of a drug was found to have the biggest impact on drug absorption kinetics, followed by capillary density and drug diffusivity.

CONCLUSION

Our modelling framework proved feasible in predicting local transport and systemic absorption from the injection site of small molecules. Understanding the effect of these properties and how to model them may help to greatly expedite the development process.

Requisite instruments for the establishment of three-dimensional epidermal human skin equivalents-A methods review

Human skin equivalents (HSEs) are three-dimensional skin organ culture models raised in vitro. This review gives an overview of common techniques for setting up HSEs. The HSE consists of an artificial dermis and epidermis. 3T3-J2 murine fibroblasts, purchased human fibroblasts or freshly isolated and cultured fibroblasts, together with other components, for example, collagen type I, are used to build the scaffold. Freshly isolated and cultured keratinocytes are seeded on top. It is possible to add other cell types, for example, melanocytes, to the HSE-depending on the research question. After several days and further steps, the 3D skin can be harvested. Additionally, we show possible markers and techniques for evaluation of artificial skin. Furthermore, we provide a comparison of HSEs to human skin organ culture, a model which employs human donor skin. We outline advantages and limitations of both models and discuss future perspectives in using HSEs.

Incorporation of hair follicles in 3D bioprinted models of human skin

Current approaches fail to adequately introduce complex adnexal structures such as hair follicles within tissue engineered models of skin. Here, we report on the use of 3D bioprinting to incorporate these structures in engineered skin tissues. Spheroids, induced by printing dermal papilla cells (DPCs) and human umbilical vein cells (HUVECs), were precisely printed within a pregelled dermal layer containing fibroblasts. The resulting tissue developed hair follicle-like structures upon maturation, supported by migration of keratinocytes and melanocytes, and their morphology and composition grossly mimicked that of the native skin tissue. Reconstructed skin models with increased complexity that better mimic native adnexal structures can have a substantial impact on regenerative medicine as grafts and efficacy models to test the safety of chemical compounds.

Alternative Non-Mammalian Animal and Cellular Methods for the Study of Host-Fungal Interactions

In the study of fungal pathogenesis, alternative methods have gained prominence due to recent global legislation restricting the use of mammalian animals in research. The principle of the 3 Rs (replacement, reduction, and refinement) is integrated into regulations and guidelines governing animal experimentation in nearly all countries. This principle advocates substituting vertebrate animals with other invertebrate organisms, embryos, microorganisms, or cell cultures. This review addresses host-fungus interactions by employing three-dimensional (3D) cultures, which offer more faithful replication of the in vivo environment, and by utilizing alternative animal models to replace traditional mammals. Among these alternative models, species like Caenorhabditis elegans and Danio rerio share approximately 75% of their genes with humans. Furthermore, models such as Galleria mellonella and Tenebrio molitor demonstrate similarities in their innate immune systems as well as anatomical and physiological barriers, resembling those found in mammalian organisms.

2-Methoxyestradiol-3,17-O,O-bis-sulfamate (STX140) Inhibits Proliferation and Invasion via Senescence Pathway Induction in Human BRAFi-Resistant Melanoma Cells

The endogenous estradiol derivative 2-Methoxyestradiol (2-ME) has shown good and wide anticancer activity but suffers from poor oral bioavailability and extensive metabolic conjugation. However, its sulfamoylated derivative, 2-methoxyestradiol-3,17-O,O-bis-sulfamate (STX140), has superior potential as a therapeutic agent, acts by disrupting microtubule polymerization, leading to cell cycle arrest and apoptosis in cancer cells and possesses much better pharmaceutical properties. This study investigated the antiproliferative and anti-invasive activities of STX140 in both SKMEL-28 naïve melanoma (SKMEL28-P) cells and resistant melanoma cells (SKMEL-28R). STX140 inhibited cell proliferation in the nanomolar range while having a less pronounced effect on human melanocytes. Additionally, STX140 induced cell cycle arrest in the G2/M phase and sub-G1, reduced migration, and clonogenic potential in monolayer models, and inhibited invasion in a 3D human skin model with melanoma cells. Furthermore, STX140 induced senescence features in melanoma and activated the senescence machinery by upregulating the expression of senescence genes and proteins related to senescence signaling. These findings suggest that STX140 may hold potential as a therapeutic agent for melanoma treatment.

Skin Microbiota and the Cosmetic Industry

Skin harbors an important microbial ecosystem - the skin microbiota that is in homeostasis with its host and is beneficial for human health. Cosmetic products have the potential to interfere with this microbial community; therefore their impact should be assessed. The aim of this review is to highlight the importance of skin microbiota in the cosmetic industry. Several studies determined that cosmetic ingredients have the potential to disrupt the skin microbiota equilibrium leading to the development of skin diseases and dysregulation of immune response. These studies led their investigation by using different methodologies and models, concluding that methods must be chosen according to the aim of the study, the skin site to be evaluated, and the target population of the cosmetics. Overall, it is crucial to test the impact of cosmetics in the skin microbiota and to stablish standard procedures, as well as specific criteria that allow to classify a cosmetic product as skin microbiota friendly.

A Perspective on Model-Informed IVIVC for Development of Subcutaneous Injectables

Subcutaneously administered drugs are growing in popularity for both large and small molecule drugs. However, development of these systems - particularly generics - is slowed due to a lack of formal guidance regarding preclinical testing and in vitro - in vivo correlations (IVIVC). Many of these methods, while appropriate for oral drugs, may not be optimized for the complex injection site physiologies, and release rate and absorption mechanisms of subcutaneous drugs. Current limitations for formulation design and IVIVC can be supported by implementing mechanistic, computational methods. These methods can help to inform drug development by identifying key drug and formulation attributes, and their effects on drug release rates. This perspective, therefore, addresses current guidelines in place for oral IVIVC development, how they may differ for subcutaneously administered compounds, and how modeling and simulation can be implemented to inform design of these products. As such, integration of modeling and simulation with current IVIVC systems can help in driving the development of subcutaneous injectables.

Statistical study of clinical trials with stem cells and their function in skin wound

Mesenchymal stem cells (MSCs) have been known as a reliable and effective source to repair damaged tissues. The differentiation and self-renewal ability, easy access, immune system modulation capability, and important role in the process of repairing wounds have caused using these cells extensively in wound healing. In this review study, the role of MSCs is debated about different diseases especially in repairing skin wounds. This review article was obtained from 75 basic and trial articles on the PubMed, Google Scholar, and Clinical Trials databases between 2000 and 2022. MSCs are capable of migrating to the wound site and are effective in all stages of wound healing. These cells differentiate into skin cells and also inhibit inflammatory responses, proliferation, and differentiation cells through paracrine messages. They stimulate locally resident precursors, leading to angiogenesis, epithelial regeneration, and granular tissue formation. During maturation stages, these cells decrease fibrosis tissue formation and wound contraction and increase collagen expression and wound tensile strength. The molecular factors of the lesion site change function of these cells and cause MSCs to create a wound healing microenvironment instead of a fibrotic microenvironment. Currently, significant advances have been achieved in the delivery of MSCs to wound sites. These cells are injected intravenously or intradermally, with or without a scaffold. They are also used in the form of spray or hydrogels. Furthermore, the extracellular vesicles and the synergistic environment of these cells alone are effective. Forthcoming studies could lead to more effective treatment strategies for the use of MSCs in wound healing.

Chronic Wound Healing Models

In this paper, we review and analyze the commonly available wound healing models reported in the literature and discuss their advantages and issues, considering their relevance and translational potential to humans. Our analysis includes different in vitro and in silico as well as in vivo models and experimental techniques. We further explore the new technologies in the study of wound healing to provide an all encompassing review of the most efficient ways to proceed with wound healing experiments. We revealed that there is not one model of wound healing that is superior and can give translatable results to human research. Rather, there are many different models that have specific uses for studying certain processes or stages of wound healing. Our analysis suggests that when performing an experiment to assess stages of wound healing or different therapies to enhance healing, one must consider not only the species that will be used but also the type of model and how this can best replicate the physiology or pathophysiology in humans.

A digital light processing 3D-printed artificial skin model and full-thickness wound models using silk fibroin bioink

A three-dimensional (3D) artificial skin model offers diverse platforms for skin transplantation, disease mechanisms, and biomaterial testing for skin tissue. However, implementing physiological complexes such as the neurovascular system with living cells in this stratified structure is extremely difficult. In this study, full-thickness skin models were fabricated from methacrylated silk fibroin (Silk-GMA) and gelatin (Gel-GMA) seeded with keratinocytes, fibroblasts, and vascular endothelial cells representing the epidermis and dermis layers through a digital light processing (DLP) 3D printer. Printability, mechanical properties, and cell viability of the skin hydrogels fabricated with different concentrations of Silk-GMA and Gel-GMA were analyzed to find the optimal concentrations for the 3D printing of the artificial skin model. After the skin model was DLP-3D printed using Gel-GMA 15% + Silk-GMA 5% bioink, cultured, and air-lifted for four weeks, well-proliferated keratinocytes and fibroblasts were observed in histological analysis, and increased expressions of Cytokeratin 13, Phalloidin, and CD31 were noted in immunofluorescence staining. Furthermore, full-thickness skin wound models were 3D-printed to evaluate the wound-healing capabilities of the skin hydrogel. When the epidermal growth factor (EGF) was applied, enhanced wound healing in the epidermis and dermis layer with the proliferation of keratinocytes and fibroblasts was observed. Also, the semi-quantitative reverse transcription-polymerase chain reaction revealed increased expression of Cytokeratin 13, fibroblast growth factor, and CD31 in the EGF-treated group relative to the control group. The DLP 3D-printed artificial skin model was mechanically stable and biocompatible for more than four weeks, demonstrating the potential for application in skin tissue engineering. STATEMENT OF SIGNIFICANCE: A full-thickness artificial skin model was 3D-printed in this study with a digital light processing technique using silk fibroin and gelatin, which mimics the structural and cellular compositions of the human skin. The 3D-printed skin hydrogel ensured the viability of the cells in the skin layers that proliferated well after air-lifting cultivation, shown in the histological analysis and immunofluorescence stainings. Furthermore, full-thickness skin wound models were 3D-printed to evaluate the wound healing capabilities of the skin hydrogel, which demonstrated enhanced wound healing in the epidermis and dermis layer with the application of epidermal growth factor on the wound compared to the control. The bioengineered hydrogel expands the applicability of artificial skin models for skin substitutes, wound models, and drug testing.

Preclinical study models of psoriasis: State-of-the-art techniques for testing pharmaceutical products in animal and nonanimal models

Local and systemic treatments exist for psoriasis, but none can do more than control its symptoms because of its numerous unknown mechanisms. The lack of validated testing models or a defined psoriatic phenotypic profile hinders antipsoriatic drug development. Despite their intricacy, immune-mediated diseases have no improved and precise treatment. The treatment actions may now be predicted for psoriasis and other chronic hyperproliferative skin illnesses using animal models. Their findings confirmed that a psoriasis animal model could mimic a few disease conditions. However, their ethical approval concerns and inability to resemble human psoriasis rightly offer to look for more alternatives. Hence, in this article, we have reported various cutting-edge techniques for the preclinical testing of pharmaceutical products for the treatment of psoriasis.

Mesenchymal stem cells express epidermal markers in an in vitro reconstructed human skin model

Introduction: In skin traumas, such as burns, epidermal homeostasis is affected, often requiring clinical approaches. Different therapeutic strategies can be used including transplantation, besides the use of synthetic or natural materials with allogeneic cells. In this context, tissue engineering is an essential tool for skin regeneration, and using mesenchymal stem cells (MSC) from the umbilical cord appears to be a promising strategy in regenerative medicine due to its renewal and differentiation potential and hypo immunogenicity. We evaluated the transdifferentiation of MSC from umbilical cord into keratinocytes in three-dimensional (3D) in vitro skin models, using dermal equivalents composed by type I collagen with dermal fibroblasts and a commercial porcine skin decellularized matrix, both cultured at air-liquid interface (ALI). Methods: The expression of epidermal proteins cytokeratins (CK) 5, 14 and 10, involucrin and filaggrin was investigated by real-time PCR and immunofluorescence, in addition to the activity of epidermal kallikreins (KLK) on the hydrolysis of fluorogenic substrates. Results and discussion: The cultivation of MSCs with differentiation medium on these dermal supports resulted in organotypic cultures characterized by the expression of the epidermal markers CK5, CK14, CK10 and involucrin, mainly on the 7^th day of culture, and filaggrin at 10^th day in ALI. Also, there was a 3-fold increase in the KLK activity in the epidermal equivalents composed by MSC induced to differentiate into keratinocytes compared to the control (MSC cultivated in the proliferation medium). Specifically, the use of collagen and fibroblasts resulted in a more organized MSC-based organotypic culture in comparison to the decellularized matrix. Despite the non-typical epithelium structure formed by MSC onto dermal equivalents, the expression of important epidermal markers in addition to the paracrine effects of these cells in skin may indicate its potential use to produce skin-based substitutes.

Advances in 3D skin bioprinting for wound healing and disease modeling

Even with many advances in design strategies over the past three decades, an enormous gap remains between existing tissue engineering skin and natural skin. Currently available in vitro skin models still cannot replicate the three-dimensionality and heterogeneity of the dermal microenvironment sufficiently to recapitulate many of the known characteristics of skin disorder or disease in vivo. Three-dimensional (3D) bioprinting enables precise control over multiple compositions, spatial distributions and architectural complexity, therefore offering hope for filling the gap of structure and function between natural and artificial skin. Our understanding of wound healing process and skin disease would thus be boosted by the development of in vitro models that could more completely capture the heterogeneous features of skin biology. Here, we provide an overview of recent advances in 3D skin bioprinting, as well as design concepts of cells and bioinks suitable for the bioprinting process. We focus on the applications of this technology for engineering physiological or pathological skin model, focusing more specifically on the function of skin appendages and vasculature. We conclude with current challenges and the technical perspective for further development of 3D skin bioprinting.

Novel strategies for designing regenerative skin products for accelerated wound healing

Healthy skin protects from pathogens, water loss, ultraviolet rays, and also maintains homeostasis conditions along with sensory perceptions in normal circumstances. Skin wound healing mechanism is a multi-phased biodynamic process that ultimately triggers intercellular and intracellular mechanisms. Failure to implement the normal and effective healing process may result in chronic injuries and aberrant scarring. Chronic wounds lead to substantial rising healthcare expenditure, and innovative methods to diagnose and control severe consequences are urgently needed. Skin tissue engineering (STE) has achieved several therapeutic accomplishments during the last few decades, demonstrating tremendous development. The engineered skin substitutes provide instant coverage for extensive wounds and facilitate the prevention of microbial infections and fluid loss; furthermore, they help in fighting inflammation and allow rapid neo-tissue formation. The current review primarily focused on the wound recovery and restoration process and the current conditions of STE with various advancements and complexities associated with different strategies such as cell sources, biopolymers, innovative fabrication techniques, and growth factors delivery systems.

Investigation of comorbid autoimmune diseases in women with autoimmune bullous diseases: An interplay of autoimmunity and practical implications

Autoimmune bullous diseases are a group of skin disorders resulting from an autoimmune reaction against intercellular adhesion molecules or components of the basement membrane of skin and mucosa. Autoimmune disorders often occur in patients with a history of another autoimmune disease and most autoimmune diseases have a striking female predominance. In this review, we aim to analyze the different associations of autoimmune bullous diseases with other autoimmune diseases and highlight the distinctiveness of the female gender in these associations.

-Omics potential of in vitro skin models for radiation exposure

There is a growing need to uncover biomarkers of ionizing radiation exposure that leads to a better understanding of how exposures take place, including dose type, rate, and time since exposure. As one of the first organs to be exposed to external sources of ionizing radiation, skin is uniquely positioned in terms of model systems for radiation exposure study. The simultaneous evolution of both MS-based -omics studies, as well as in vitro 3D skin models, has created the ability to develop a far more holistic understanding of how ionizing radiation affects the many interconnected biomolecular processes that occur in human skin. However, there are a limited number of studies describing the biomolecular consequences of low-dose ionizing radiation to the skin. This review will seek to explore the current state-of-the-art technology in terms of in vitro 3D skin models, as well as track the trajectory of MS-based -omics techniques and their application to ionizing radiation research, specifically, the search for biomarkers within the low-dose range.

Collagen gel contraction assays: From modelling wound healing to quantifying cellular interactions with three-dimensional extracellular matrices

Cells respond to and actively remodel the extracellular matrix (ECM). The dynamic and bidirectional interaction between cells and ECM, especially their mechanical interactions, has been found to play an essential role in triggering a series of complex biochemical and biomechanical signal pathways and in regulating cellular functions and behaviours. The collagen gel contraction assay (CGCA) is a widely used method to investigate cell-ECM interactions in 3D environments and provides a mechanically associated readout reflecting 3D cellular contractility. In this review, we summarize various versions of CGCA, with an emphasis on recent high-throughput and low-consumption CGCA techniques. More importantly, we focus on the technique of force monitoring during the contraction of collagen gel, which provides a quantitative characterization of the overall forces generated by all the resident cells in the collagen hydrogel. Accordingly, we present recent biological applications of the CGCA, which have expanded from the initial wound healing model to other studies concerning cell-ECM interactions, including fibrosis, cancer, tissue repair and the preparation of biomimetic microtissues.

Terahertz anisotropy in fascia and lean meat tissues

Terahertz (THz) spectroscopy provides multifaceted capabilities for observing low-energy responses of macromolecules, cells and tissues, understanding THz biophysical effects, and expecting to realize the application of THz technology in biomedicine. However, its high-frequency characteristics of limited penetration depth and strong absorption of water in the body comparable to microwaves are impeding the proliferation of THz spectroscopy. Here we show that THz spectroscopy makes possible the observation of THz anisotropy phenomena for the first time in fascia and lean tissue. Through optical microscopy, we infer that the microscopic mechanism of THz anisotropy comes from the periodic stripe structure of the biological tissue. The above related experimental findings may be expected to promote the application of THz technology in biomedicine.

Stratum corneum ceramide profiles in vitro, ex vivo, and in vivo: characterization of the α-hydroxy double esterified ceramides

The presence of a new ceramide subclass, the 1-O-acyl omega-linoleoyloxy ceramides [1-O-E (EO) Cer], has been previously highlighted in reconstructed human epidermis (RHE). These ceramides are double esterified on two positions. The first is the 1-O position of the sphingoid base moiety with a long to very long chain of acyl residues (1-O-E), and the second is the position of the ω-hydroxyl group of the fatty acid moiety with linoleic acid (EO). Considering its chemical structure and hydrophobicity, this subclass can contribute to the skin barrier. Thus, it is important to determine whether this subclass is also present in native human stratum corneum (SC). This work compares ceramide structures of this novel subclass between RHE (in vitro) and two sources of human SC (in vivo and ex vivo) using normal-phase high-performance liquid chromatography coupled to high-resolution mass spectrometry (NP-HPLC/HR-MSⁿ). The results confirm the presence of this double esterified ceramide subclass [1-O-E (EO) Cer] in human SC. The molecular profile obtained from the RHE was very close to that found in the human SC (in vivo and ex vivo). In addition, thanks to the targeted MS²/MS³ analysis, a new ceramide subclass was discovered and characterized in the three studied samples. We propose to name it [A-1-O-E (EO) Cer] because in these ceramides species, the fatty acid-esterified with the sphingoid base on the 1-O position-is hydroxylated on the α position. These results highlight the potential of both the analytical method and the characterization approach employed in this study.

Skin-on-a-Chip Technology: Microengineering Physiologically Relevant In Vitro Skin Models

The increased demand for physiologically relevant in vitro human skin models for testing pharmaceutical drugs has led to significant advancements in skin engineering. One of the most promising approaches is the use of in vitro microfluidic systems to generate advanced skin models, commonly known as skin-on-a-chip (SoC) devices. These devices allow the simulation of key mechanical, functional and structural features of the human skin, better mimicking the native microenvironment. Importantly, contrary to conventional cell culture techniques, SoC devices can perfuse the skin tissue, either by the inclusion of perfusable lumens or by the use of microfluidic channels acting as engineered vasculature. Moreover, integrating sensors on the SoC device allows real-time, non-destructive monitoring of skin function and the effect of topically and systemically applied drugs. In this Review, the major challenges and key prerequisites for the creation of physiologically relevant SoC devices for drug testing are considered. Technical (e.g., SoC fabrication and sensor integration) and biological (e.g., cell sourcing and scaffold materials) aspects are discussed. Recent advancements in SoC devices are here presented, and their main achievements and drawbacks are compared and discussed. Finally, this review highlights the current challenges that need to be overcome for the clinical translation of SoC devices.

Antifungal Activity and Biocompatibility of α-AgVO3, α-Ag2WO4, and β-Ag2MoO4 Using a Three-Dimensional Coculture Model of the Oral Mucosa

Fungal infections have become a major concern in the medical community, especially those caused by Candida spp. Within this species, Candida albicans stands out for being an opportunistic commensal fungus that can cause superficial and invasive infections. Current antifungal therapy involves the local and/or systemic use of drugs such as azoles, polyenes, and echinocandins. These antifungals are based on highly specific target sites, and the development of resistance may occur with changes in the enzymatic pathways that serve as the drug targets. Thus, the development of new antifungal drugs is highly recommended to prevent drug resistance. The present investigation evaluated the antifungal activity of silver-containing microcrystals such as silver vanadate (α-AgVO₃), silver tungstate (α-Ag₂WO₄), and silver molybdate (β-Ag₂MoO₄). In addition to having antimicrobial activity, such compounds should not cause damage to underlying tissues. Thus, to better assess the biocompatibility of new compounds, a new three-dimensional (3D) coculture model involving three cell lines was developed. The validation of the model was based on fluorescent markers and confocal laser microscopy. The biocompatibility of silver-containing microcrystals was evaluated by MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay. 3D coculture was infected with C. albicans biofilm and challenged with α-AgVO₃, α-Ag₂WO₄, and β-Ag₂MoO₄. The action of microcrystals on C. albicans biofilm was evaluated by colony-forming units (CFU/ml) and LIVE/DEAD staining. In addition, production of proinflammatory cytokines interleukin 6 (IL-6), IL-8, IL-1β, and tumor necrosis factor α (TNF-α) was measured by cytometric bead array kit using flow cytometry. The 3D coculture model described here proved to be adequate to assess both the biocompatibility of the new materials and the infectious processes. Regarding the biocompatibility of the microcrystals, only α-AgVO₃ (15.62 µg/ml) showed a decrease in cell viability. The antibiofilm activity of α-Ag₂WO₄ was similar to that of the standard drug (fluconazole). Although α-Ag₂WO₄ was able to induce the production of IL-6, IL-8, and IL-1β, no differences in cytokine production were observed between noninfected and infected models treated with this microcrystal. β-Ag₂MoO₄ inhibits the production of TNF-α in the infected model; however, it showed no antibiofilm activity. Based on the biocompatibility and antifungal findings, α-Ag₂WO₄ is a promising material for treating C. albicans infection.

Large full-thickness wounded skin regeneration using 3D-printed elastic scaffold with minimal functional unit of skin

Traditional tissue engineering skin are composed of living cells and natural or synthetic scaffold. Besize the time delay and the risk of contamination involved with cell culture, the lack of autologous cell source and the persistence of allogeneic cells in heterologous grafts have limited its application. This study shows a novel tissue engineering functional skin by carrying minimal functional unit of skin (MFUS) in 3D-printed polylactide-co-caprolactone (PLCL) scaffold and collagen gel (PLCL + Col + MFUS). MFUS is full-layer micro skin harvested from rat autologous tail skin. 3D-printed PLCL elastic scaffold has the similar mechanical properties with rat skin which provides a suitable environment for MFUS growing and enhances the skin wound healing. Four large full-thickness skin defects with 30 mm diameter of each wound are created in rat dorsal skin, and treated either with tissue engineering functional skin (PLCL + Col + MFUS), or with 3D-printed PLCL scaffold and collagen gel (PLCL + Col), or with micro skin islands only (Micro skin), or without treatment (Normal healing). The wound treated with PLCL + Col + MFUS heales much faster than the other three groups as evidenced by the fibroblasts migration from fascia to the gap between the MFUS dermis layer, and functional skin with hair follicles and sebaceous gland has been regenerated. The PLCL + Col treated wound heals faster than normal healing wound, but no skin appendages formed in PLCL + Col-treated wound. The wound treated with micro skin islands heals slower than the wounds treated either with tissue engineering skin (PLCL + Col + MFUS) or with PLCL + Col gel. Our results provide a new strategy to use autologous MFUS instead "seed cells" as the bio-resource of engineering skin for large full-thickness skin wound healing.

Study on the Effect and Mechanism of Antibacterial Adhesive Hydrogel on Wound Healing

Bleeding and infection can cause significant increases in mortalities. Hydrogel sealants have attracted extensive attention for their ability to control bleeding. In this study, the adjuvant treatment with antibacterial adhesive hydrogel dressings was applied to patients with deep second-degree burns/scalds. The traditional medical dressing was regarded as control adjuvant treatment. The results indicated that the total positive rate of bacteria in wound secretions and the pain during dressing change in patients who used antibacterial adhesive hydrogel dressings were significantly reduced. The number of fibroblasts and new capillaries in the granulation tissue of the wound increased, and the patient's wound healing is accelerated. The overall clinical effectiveness has been significantly improved. It is proven that the antibacterial adhesive hydrogel dressing has a significant effect on wound healing.

The Challenging Melanoma Landscape: From Early Drug Discovery to Clinical Approval

Melanoma is recognized as the most dangerous type of skin cancer, with high mortality and resistance to currently used treatments. To overcome the limitations of the available therapeutic options, the discovery and development of new, more effective, and safer therapies is required. In this review, the different research steps involved in the process of antimelanoma drug evaluation and selection are explored, including information regarding in silico, in vitro, and in vivo experiments, as well as clinical trial phases. Details are given about the most used cell lines and assays to perform both two- and three-dimensional in vitro screening of drug candidates towards melanoma. For in vivo studies, murine models are, undoubtedly, the most widely used for assessing the therapeutic potential of new compounds and to study the underlying mechanisms of action. Here, the main melanoma murine models are described as well as other animal species. A section is dedicated to ongoing clinical studies, demonstrating the wide interest and successful efforts devoted to melanoma therapy, in particular at advanced stages of the disease, and a final section includes some considerations regarding approval for marketing by regulatory agencies. Overall, considerable commitment is being directed to the continuous development of optimized experimental models, important for the understanding of melanoma biology and for the evaluation and validation of novel therapeutic strategies.

Kynurenine inhibits melanogenesis in human melanocyte-keratinocyte co-cultures and in a reconstructed 3D skin model

Kynurenine (KYN), the most abundant metabolite of tryptophan, is classically associated with immune tolerance and tumor immune escape. In the last years, KYN is in the spotlight in other biological processes. Here, we showed that KYN inhibited tyrosinase expression and melanin content in primary human melanocyte and keratinocyte co-cultures. Furthermore, KYN decreased melanosome content in a 3D human skin reconstruction model. In these experiments, we used tyrosine + NH₄ Cl to induce pigmentation. We compared the inhibitory effect of KYN on melanogenesis with the already known inhibitory effect promoted by IFN-γ. Since increased KYN production depends on the IFN-γ-inducible enzyme indoleamine-2,3-dioxygenase (IDO), we propose that part of the effect of IFN-γ on melanogenesis involves KYN production. From that, we tested if, during melanogenesis, changes in tryptophan metabolism would occur. For this purpose, we measured tryptophan, KYN and downstream products along with pigmentation. There were no significant changes in Trp metabolism, except for the high consumption of kynurenic acid. Our data identify the skin as a potential target for the action of KYN relevant for skin physiology and pigmentation. The results are discussed concerning the high production of KYN in skin inflammatory disorders and cancer.

Modulation of Photoaging-Induced Cutaneous Elastin: Evaluation of Gene and Protein Expression of Markers Related to Elastogenesis Under Different Photoexposure Conditions

INTRODUCTION

Photoaging is the process by which ultraviolet rays gradually induce clinical and histological changes in the skin through the production and organization of biological molecules, such as elastin, which is critical to skin strength and elasticity. After exposure to radiation, elastin may undergo alternative mRNA splicing, resulting in modified proteins that contribute to the formation of aging characteristics, such as solar elastosis. The present work aimed to study two different forms of elastin under these conditions: normal elastin and elastin that had been altered in exon 26A.

METHODS

These different forms of elastin were characterized for gene expression by quantitative real-time polymerase chain reaction (qPCR) and for protein expression by immunohistochemistry of ex vivo skins (from photoexposed and non-photoexposed areas) and in vitro reconstituted skin. In addition, up- and downstream molecules in the elastin signaling cascade were evaluated.

RESULTS

As a result, a significant increase in the gene expression of elastin 26A was observed in both ex vivo photoexposed skin tissues and the in vitro photoexposed reconstituted skins. Additionally, significant increases in the gene expression levels of matrix metalloproteinase-12 (MMP12) and lysyl oxidase (LOX) were observed in the ex vivo skin model. The evaluation of protein expression levels of some photoaging markers on the reconstituted skin revealed increased tropoelastin and fibrillin-1 expression after photoexposure.

CONCLUSION

This work contributes to a better understanding of the biological mechanisms involved in photoaging, making it possible to obtain new strategies for the development of dermocosmetic active ingredients to prevent and treat skin aging.

An in vivo model of postinflammatory hyperpigmentation and erythema: clinical, colorimetric and molecular characteristics

BACKGROUND

Postinflammatory hyperpigmentation (PIH) is a common, acquired pigmentary disorder of the skin associated with significant quality-of-life impairment, especially in individuals with skin of colour. Current treatment for PIH is limited, largely due to a poor understanding of disease pathogenesis and the lack of a representative disease model.

OBJECTIVES

This study is intended to further develop, update and validate our previously designed in vivo model of acne-induced PIH/postinflammatory erythema (PIE) using different concentrations of trichloroacetic acid (TCA), a medium-depth chemical peel.

METHODS

Twenty-nine patients with skin types II-VI and clinician-confirmed presence of two or more truncal acne pustules and PIH/PIE were included. On the basis of Investigator's Global Assessment (IGA), clinical polarized photography (CPP), colorimetry and Skindex, we experimentally determined an optimum TCA concentration and assessed our model's ability to exhibit a dose-response relationship between degree of inciting insult and severity of resulting pigmentation. We also performed differential microRNA profiling and pathway analysis to explore the potential of microRNAs as molecular adjuncts to our model.

RESULTS

Application of TCA 30% produced lesions indistinguishable from acne-induced PIH and PIE lesions on the basis of colorimetry data without causing epidermal necrosis. Application of progressively increasing TCA doses from 20% to 30% resulted in concentration-dependent increases in CPP, IGA and colorimetry scores at all timepoints during the study. miRNA-31 and miRNA-23b may play a role in PIH pathogenesis, although further validation is required.

CONCLUSIONS

Our TCA-based in vivo model, using TCA concentrations between 20% and 30% with an optimum of 30%, enables the quantitative assessment of the pigmentary response to varying degrees of cutaneous inflammation in a fashion that mirrors natural acne-induced PIH and PIE.

Development of a Multi-Layer Skin Substitute Using Human Hair Keratinic Extract-Based Hybrid 3D Printing

Large-sized or deep skin wounds require skin substitutes for proper healing without scar formation. Therefore, multi-layered skin substitutes that mimic the genuine skin anatomy of multiple layers have attracted attention as suitable skin substitutes. In this study, a novel skin substitute was developed by combining the multi-layer skin tissue reconstruction method with the combination of a human-derived keratinic extract-loaded nano- and micro-fiber using electrospinning and a support structure using 3D printing. A polycaprolactone PCL/keratin electrospun scaffold showed better cell adhesion and proliferation than the keratin-free PCL scaffold, and keratinocytes and fibroblasts showed better survival, adhesion, and proliferation in the PCL/keratin electrospun nanofiber scaffold and microfiber scaffold, respectively. In a co-culture of keratinocytes and fibroblasts using a multi-layered scaffold, the two cells formed the epidermis and dermal layer on the PCL/keratin scaffold without territorial invasion. In the animal study, the PCL/keratin scaffold caused a faster regeneration of new skin without scar formation compared to the PCL scaffold. Our study showed that PCL/keratin scaffolds co-cultured with keratinocytes and fibroblasts promoted the regeneration of the epidermal and dermal layers in deep skin defects. Such finding suggests a new possibility for artificial skin production using multiple cells.

Biochemical impact of solar radiation exposure on human keratinocytes monitored by Raman spectroscopy; effects of cell culture environment

Understanding and amelioration of the effects of solar radiation exposure are critical in preventing the occurrence of skin cancer. Towards this end, many studies have been conducted in 2D cell culture models under simplified and unrealistic conditions. 3D culture models better capture the complexity of in vivo physiology, although the effects of the 3D extracellular matrix have not been well studied. Monitoring the instantaneous and resultant cellular responses to exposure, and the influence of the 3D environment, could provide an enhanced understanding of the fundamental processes of photocarcinogenesis. This work presents an analysis of the biochemical impacts of simulated solar radiation (SSR) occurring in immortalised human epithelial keratinocytes (HaCaT), in a 3D skin model, compared to 2D culture. Cell viability was monitored using the Alamar Blue colorimetric assay (AB), and the impact of the radiation exposure, at the level of the biomolecular constituents (nucleic acids and proteins), were evaluated through the combination of Raman microspectroscopy and multivariate statistical analysis. The results suggest that SSR exposure induces alterations of the conformational structure of DNA as an immediate impact, whereas changes in the protein signature are primarily seen as a subsequent response.

Assessment of the skin barrier function in the reconstructed human epidermis using a multimodal approach at molecular, tissue and functional levels

Reconstructed human epidermis models are used as epidermis alternatives in skin research studies. It is necessary to provide molecular and functional characterization in order to assess these models. Our aim is to establish a link between the barrier function and the structure and composition of the stratum corneum using several complementary techniques. The following three studies were performed on reconstructed human epidermis during the keratinocyte differentiation process: (i) caffeine percutaneous penetration kinetics, (ii) epidermis thickness measurement, stratum corneum formation and lipid organization by Raman microspectroscopy and (iii) lipid composition evolution by liquid chromatography coupled to high-resolution mass spectrometry. The results demonstrated that the caffeine penetration decreased along the differentiation process. Raman in-depth images demonstrated an increase in stratum corneum and RHE thickness accompanied by the evolution of lipid organization. Lipid analysis showed an increase of the ceramide amount and an inverse relationship between ceramide and its precursor levels during the differentiation process. Different behaviors between several ceramide subclasses are highlighted and they relied on the corresponding differentiation stages. The generation of the most important ceramides for the barrier function is closely followed. A period shift between lipid generation and their organization was found. Our analytical data allowed identifying the following 3 groups of maturation days: before day 15, between days 15 and 19, and after day 19. The chemical and physiological states of the barrier function for each group are described thanks to a multimodal approach.

Effect of Fibrin Concentration on the In Vitro Production of Dermo-Epidermal Equivalents

Human plasma-derived bilayered skin substitutes were successfully used by our group to produce human-based in vitro skin models for toxicity, cosmetic, and pharmaceutical testing. However, mechanical weakness, which causes the plasma-derived fibrin matrices to contract significantly, led us to attempt to improve their stability. In this work, we studied whether an increase in fibrin concentration from 1.2 to 2.4 mg/mL (which is the useful fibrinogen concentration range that can be obtained from plasma) improves the matrix and, hence, the performance of the in vitro skin cultures. The results show that this increase in fibrin concentration indeed affected the mechanical properties by doubling the elastic moduli and the maximum load. A structural analysis indicated a decreased porosity for the 2.4 mg/mL hydrogels, which can help explain this mechanical behavior. The contraction was clearly reduced for the 2.4 mg/mL matrices, which also allowed for the growth and proliferation of primary fibroblasts and keratinocytes, although at a somewhat reduced rate compared to the 1.2 mg/mL gels. Finally, both concentrations of fibrin gave rise to organotypic skin cultures with a fully differentiated epidermis, although their lifespans were longer (25–35%) in cultures with more concentrated matrices, which improves their usefulness. These systems will allow the generation of much better in vitro skin models for the testing of drugs, cosmetics and chemicals, or even to “personalized” skin for the diagnosis or determination of the most effective treatment possible.

Colorimetric Ionic Organohydrogels Mimicking Human Skin for Mechanical Stimuli Sensing and Injury Visualization

Artificial skins with sensing ability have great potential in applications of wearable devices and soft robotics. Inspired by the functions of human skins including sensing stimuli via electrical signal and bruising for injury indication, an ionic conductive and mechanochromic organohydrogel is synthesized and demonstrated as ionic skin (I-skin). The gel consisting of mechanochromophore cross-linked micelles is mechanically robust, stretchable, and deformation durable with minor hysteresis, and it also displays good solvent retention. The change of relative resistance during elongation and compression suggests a high sensitivity. An optical change from pale yellow to bruise-like blue-purple color is observed under a large deformation. The ionic conductive organohydrogel as I-skin is attached to different parts of the human body with movements mimicking various body-bruising scenarios, demonstrating successful perception and visualization of mechanical stimuli. The work vividly presents a strain sensor with the functions of injury visualization and damage warning for mechanical impacts. The I-skin can be potentially used in the applications including prosthetic devices, wearable electronics, and intelligent robots.