Antibacterial efficacy and mechanisms of action of low power atmospheric pressure cold plasma: membrane permeability, biofilm penetration and antimicrobial sensitization

In Vitro Safety Study on the Use of Cold Atmospheric Plasma in the Upper Respiratory Tract

Cold atmospheric plasma (CAP) devices generate reactive oxygen and nitrogen species, have antimicrobial and antiviral properties, but also affect the molecular and cellular mechanisms of eukaryotic cells. The aim of this study is to investigate CAP treatment in the upper respiratory tract (URT) to reduce the incidence of ventilator-associated bacterial pneumonia (especially superinfections with multi-resistant pathogens) or viral infections (e.g., COVID-19). For this purpose, the surface-microdischarge-based plasma intensive care (PIC) device was developed by terraplasma medical GmbH. This study analyzes the safety aspects using in vitro assays and molecular characterization of human oral keratinocytes (hOK), human bronchial-tracheal epithelial cells (hBTE), and human lung fibroblasts (hLF). A 5 min CAP treatment with the PIC device at the "throat" and "subglottis" positions in the URT model did not show any significant differences from the untreated control (ctrl.) and the corresponding pressurized air (PA) treatment in terms of cell morphology, viability, apoptosis, DNA damage, and migration. However, pro-inflammatory cytokines (MCP-1, IL-6, and TNFα) were induced in hBTE and hOK cells and profibrotic molecules (collagen-I, FKBP10, and αSMA) in hLF at the mRNA level. The use of CAP in the oropharynx may make an important contribution to the recovery of intensive care patients. The results indicate that a 5 min CAP treatment in the URT with the PIC device does not cause any cell damage. The extent to which immune cell activation is induced and whether it has long-term effects on the organism need to be carefully examined in follow-up studies in vivo.

Guided Plasma Application in Dentistry-An Alternative to Antibiotic Therapy

Cold atmospheric plasma (CAP) is a promising alternative to antibiotics and chemical substances in dentistry that can reduce the risk of unwanted side effects and bacterial resistance. AmbiJet is a device that can ignite and deliver plasma directly to the site of action for maximum effectiveness. The aim of the study was to investigate its antimicrobial efficacy and the possible development of bacterial resistance. The antimicrobial effect of the plasma was tested under aerobic and anaerobic conditions on bacteria (five aerobic, three anaerobic (Gram +/-)) that are relevant in dentistry. The application times varied from 1 to 7 min. Possible bacterial resistance was evaluated by repeated plasma applications (10 times in 50 days). A possible increase in temperature was measured. Plasma effectively killed 106 seeded aerobic and anaerobic bacteria after an application time of 1 min per 10 mm2. Neither the development of resistance nor an increase in temperature above 40 °C was observed, so patient discomfort can be ruled out. The plasma treatment proved to be effective under anaerobic conditions, so the influence of ROS can be questioned. Our results show that AmbiJet efficiently eliminates pathogenic oral bacteria. Therefore, it can be advocated for clinical therapeutic use.

How does atmospheric pressure cold helium plasma affect the biomechanical behaviour on alkali-lesioned corneas?

BACKGROUND

Melting corneal ulcers are a serious condition that affects a great number of animals and people around the world and it is characterised by a progressive weakening of the tissue leading to possible severe ophthalmic complications, such as visual impairment or blindness. This disease is routinely treated with medical therapy and keratoplasty, and recently also with alternative regenerative therapies, such as cross-linking, amniotic membrane transplant, and laser. Plasma medicine is another recent example of regenerative treatment that showed promising results in reducing the microbial load of corneal tissue together with maintaining its cellular vitality. Since the effect of helium plasma application on corneal mechanical viscoelasticity has not yet been investigated, the aim of this study is first to evaluate it on ex vivo porcine corneas for different exposition times and then to compare the results with previous data on cross-linking treatment.

RESULTS

94 ex vivo porcine corneas divided into 16 populations (healthy or injured, fresh or cultured and treated or not with plasma or cross-linking) were analysed. For each population, a biomechanical analysis was performed by uniaxial stress-relaxation tests, and a statistical analysis was carried out considering the characteristic mechanical parameters. In terms of equilibrium normalised stress, no statistically significant difference resulted when the healthy corneas were compared with lesioned plasma-treated ones, independently of treatment time, contrary to what was obtained about the cross-linking treated corneas which exhibited more intense relaxation phenomena.

CONCLUSIONS

In this study, the influence of the Helium plasma treatment was observed on the viscoelasticity of porcine corneas ex vivo, by restoring in lesioned tissue a degree of relaxation similar to the one of the native tissue, even after only 2 min of application. Therefore, the obtained results suggest that plasma treatment is a promising new regenerative ophthalmic therapy for melting corneal ulcers, laying the groundwork for further studies to correlate the mechanical findings with corneal histology and ultrastructural anatomy after plasma treatment.

Overcoming antibiotic resistance: non-thermal plasma and antibiotics combination inhibits important pathogens

Antibiotic resistance (ATBR) is increasing every year as the overuse of antibiotics (ATBs) and the lack of newly emerging antimicrobial agents lead to an efficient pathogen escape from ATBs action. This trend is alarming and the World Health Organization warned in 2021 that ATBR could become the leading cause of death worldwide by 2050. The development of novel ATBs is not fast enough considering the situation, and alternative strategies are therefore urgently required. One such alternative may be the use of non-thermal plasma (NTP), a well-established antimicrobial agent actively used in a growing number of medical fields. Despite its efficiency, NTP alone is not always sufficient to completely eliminate pathogens. However, NTP combined with ATBs is more potent and evidence has been emerging over the last few years proving this is a robust and highly effective strategy to fight resistant pathogens. This minireview summarizes experimental research addressing the potential of the NTP-ATBs combination, particularly for inhibiting planktonic and biofilm growth and treating infections in mouse models caused by methicillin-resistant Staphylococcus aureus or Pseudomonas aeruginosa. The published studies highlight this combination as a promising solution to emerging ATBR, and further research is therefore highly desirable.

Cold plasma for sustainable control of hygienically relevant biofilms. The interaction of plasma distance and exposure time

This study aimed to analyse the efficacy of a new cold plasma device adapted for treatment with a low power consumption . We tested the reduction of bacterial cells in biofilms of E. coli, S. aureus and P. aeruginosa. . The results show significant differences between bacterial cells, suggesting that Gramme-positive S. aureus is less susceptible to plasma treatment than Gramme-negative E. coli and P. aeruginosa. Increasing the exposure time and decreasing the distance decreases the number of cells in the biofilm. However, the combination of close distance and long exposure time resulted in synergistic effects. We demonstrated a reduction of up to 6.6 log CFU cm2 for E. coli at 1 mm and an exposure time of 60 seconds. All these indicate that the new cold plasma jet device can be an important key to ensuring hygiene and numerous applications in medicine and engineering are possible.

Plasma activated water as a pre-treatment strategy in the context of biofilm-infected chronic wounds

Healing and treatment of chronic wounds are often complicated due to biofilm formation by pathogens. Here, the efficacy of plasma activated water (PAW) as a pre-treatment strategy has been investigated prior to the application of topical antiseptics polyhexamethylene biguanide, povidone iodine, and MediHoney, which are routinely used to treat chronic wounds. The efficacy of this treatment strategy was determined against biofilms of Escherichia coli formed on a plastic substratum and on a human keratinocyte monolayer substratum used as an in vitro biofilm-skin epithelial cell model. PAW pre-treatment greatly increased the killing efficacy of all the three antiseptics to eradicate the E. coli biofilms formed on the plastic and keratinocyte substrates. However, the efficacy of the combined PAW-antiseptic treatment and single treatments using PAW or antiseptic alone was lower for biofilms formed in the in vitro biofilm-skin epithelial cell model compared to the plastic substratum. Scavenging assays demonstrated that reactive species present within the PAW were largely responsible for its anti-biofilm activity. PAW treatment resulted in significant intracellular reactive oxygen and nitrogen species accumulation within the E. coli biofilms, while also rapidly acting on the microbial membrane leading to outer membrane permeabilisation and depolarisation. Together, these factors contribute to significant cell death, potentiating the antibacterial effect of the assessed antiseptics.

Exploring the potential of cold plasma therapy in treating bacterial infections in veterinary medicine: opportunities and challenges

Cold plasma therapy is a novel approach that has shown significant promise in treating bacterial infections in veterinary medicine. Cold plasma possesses the potential to eliminate various bacteria, including those that are resistant to antibiotics, which renders it a desirable substitute for traditional antibiotics. Furthermore, it can enhance the immune system and facilitate the process of wound healing. However, there are some challenges associated with the use of cold plasma in veterinary medicine, such as achieving consistent and uniform exposure to the affected area, determining optimal treatment conditions, and evaluating the long-term impact on animal health. This paper explores the potential of cold plasma therapy in veterinary medicine for managing bacterial diseases, including respiratory infections, skin infections, and wound infections such as Clostridium botulinum, Clostridium perfringens, Bacillus cereus, and Bacillus subtilis. It also shows the opportunities and challenges associated with its use. In conclusion, the paper highlights the promising potential of utilizing cold plasma in veterinary medicine. However, to gain a comprehensive understanding of its benefits and limitations, further research is required. Future studies should concentrate on refining treatment protocols and assessing the long-term effects of cold plasma therapy on bacterial infections and the overall health of animals.

Antimicrobial efficacy of chlorine agents against selected oral pathogens

OBJECTIVES

Method-dependent comparison of antimicrobial agents' efficacy against oral pathogens.

MATERIALS AND METHODS

Several sodium hypochlorite solutions (NaOCl)-Perisolv®, Carisolv® and Dakin's solution-were equated with chlorhexidine (CHX) and hydrogen peroxide (H2O2) against ten oral micro-organisms related to caries and periodontitis using different minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC) techniques. Agents were adjusted to the final 70 mmol/L concentration of active chlorine molecule.

RESULTS

Apart from H2O2 and the amino acids of Perisolv®, all the agents revealed an antimicrobial effect. Agar diffusion test ranked CHX (p < 0.05) as the most effective against all ten specimens, followed by the NaOCl of Perisolv® and Dakin's solution. Correspondingly, in broth microdilution on agar, CHX was the most effective in eradicating micro-organisms at 0.03 mmol/L compared with 2.2 mmol/L of Dakin's solution. In contrast, the bactericidal concentration of Dakin's solution was the most effective at 0.2 mmol/L, (p < 0.001), followed by Perisolv® (2.14 mmol/L), CHX (2.38 mmol/L) and Carisolv® (3.33 mmol/L) after 5 and 10 min in broth dilution test. In live/dead analysis, 60-min exposure to a 2-fold concentration of agents resulted in two-log Aggregatibacter actinomycetemcomitans inhibition by CHX (35 mmol/L) whilst Streptococcus mutans was more susceptible, in 0.8 and 8.8 mmol/L, after 10 min to CHX and Dakin's respectively.

CONCLUSION

Replacement of CHX with tested hypochlorite agents showed evident potential and promoted rapid antimicrobial effect.

CLINICAL RELEVANCE

Effective antimicrobial agents are crucial in controlling pathogen-induced oral infections increasing clinical possibilities to combat oral biofilms. Additionally, CHX substitution with hypochlorite agents could eliminate CHX's adverse effects.

Mechanisms of bacterial inhibition and tolerance around cold atmospheric plasma

The grim situation of bacterial infection has undoubtedly become a major threat to human health. In the context of frequent use of antibiotics, a new bactericidal method is urgently needed to fight against drug-resistant bacteria caused by non-standard use of antibiotics. Cold atmospheric plasma (CAP) is composed of a variety of bactericidal species, which has excellent bactericidal effect on microbes. However, the mechanism of interaction between CAP and bacteria is not completely clear. In this paper, we summarize the mechanisms of bacterial killing by CAP in a systematic manner, discuss the responses of bacteria to CAP treatment that are considered to be related to tolerance and their underlying mechanisms, review the recent advances in bactericidal applications of CAP finally. This review indicates that CAP inhibition and tolerance of survival bacteria are a set of closely related mechanisms and suggests that there might be other mechanisms of tolerance to survival bacteria that had not been discovered yet. In conclusion, this review shows that CAP has complex and diverse bactericidal mechanisms, and has excellent bactericidal effect on bacteria at appropriate doses. KEY POINTS: • The bactericidal mechanism of CAP is complex and diverse. • There are few resistant bacteria but tolerant bacteria during CAP treatment. • There is excellent germicidal effect when CAP in combination with other disinfectants.

The Optimal Effective Concentration Combination (OPECC) as a Novel Method for Evaluating the Effects of Binary Application of Antibacterial Compounds

Combination therapies appear to be beneficial for preventing bacterial resistance to antibacterial approaches. The aim of this study was to define and determine an optimal effective concentration combination (OPECC) for binary application of antibacterial compounds. The antiseptics chlorhexidine (CHX), benzalkonium chloride (BAC), and cetylpyridinium chloride (CPC), as well as the antibiotic ciprofloxacin (CIP), were tested against planktonic Escherichia coli in binary combinations by applying a checkerboard assay, and then evaluated according to the established synergism principles. Extending the checkerboard method, the optical density (OD) of the wells was measured photometrically. On the borderline between effective (OD = 0) and non-effective (OD > 0) eradication of the bacterial cultures, the OPECC was determined. Binary combinations of CPC or CHX with BAC were assessed as either synergistic or indifferent, respectively, while there was no OPECC to calculate. For all other binary combinations, an OPECC was derivable, and these were assessed as either synergistic or indifferent. In conclusion, the evaluation of the binary combination application of antibacterial compounds based on the checkerboard method was refined to such an extent that it was possible to determine at least one concentration pair that could be defined and considered as an OPECC, independently of the evaluation of the system according to the different synergy principles. In general, the method presented herein for determining an OPECC can be applied to any conceivable method or system aimed at the eradication of a pathogen.

Plasma for aquaponics

Global environmental, social, and economic challenges call for innovative solutions to food production. Current food production systems require advances beyond traditional paradigms, acknowledging the complexity arising from sustainability and a present lack of awareness about technologies that may help limit, for example, loss of nutrients from soil. Aquaponics, a closed-loop system that combines aquaculture with hydroponics, is a step towards the more efficient management of scarce water, land, and nutrient resources. However, its large-scale use is currently limited by several significant challenges of maintaining desirable water chemistry and pH, managing infections in fish and plants, and increasing productivity efficiently, economically, and sustainably. This paper investigates the opportunities presented by plasma technologies in meeting these challenges, potentially opening new pathways for sustainability in food production.

Applications of atmospheric cold plasma in agricultural, medical, and bioprocessing industries

Abstract

Atmospheric cold plasma (ACP) is a nonthermal technology that is extensively used in several industries. Within the scopes of engineering and biotechnology, some notable applications of ACP include waste management, material modification, medicine, and agriculture. Notwithstanding numerous applications, ACP still encounters a number of challenges such as diverse types of plasma generators and sizes, causing standardization challenges. This review focuses on the uses of ACP in engineering and biotechnology sectors in which the innovation can positively impact the operation process, enhance safety, and reduce cost. Additionally, its limitations are examined. Since ACP is still in its nascent stage, the review will also propose potential research opportunities that can help scientists gain more insights on the technology.

Key points

• ACP technology has been used in agriculture, medical, and bioprocessing industries.

• Chemical study on the reactive species is crucial to produce function-specific ACP.

• Different ACP devices and conditions still pose standardization problems.

Cold atmospheric plasma enhances doxorubicin selectivity in metastasic bone cancer

High-dose systemic chemotherapy constitutes a main strategy in the management of bone metastases, employing drugs like doxorubicin (DOX), related with severe side effects. To solve this issue, Cold Atmospheric Plasmas (CAP) have been proposed as potential non-invasive anti-cancer agents capable of improving the efficacy of traditional drugs. Here, we investigate the cytotoxic effects of Plasma Conditioned Medium (PCM) in combination with DOX in prostate cancer cells from bone metastases (PC-3) as well as in non-malignant bone-cells. PCM was able to enhance the cytotoxic potential of DOX both in monolayer and in a 3D bioengineered model mimicking the bone matrix. The combined treatment of PCM + DOX resulted in a profound downregulation of the redox defenses (CAT1, SOD2, GPX1) and drug resistance genes (MRP1, MDR1, BCRP1), resulting in an enhanced uptake of DOX coupled to an overload of intracellular ROS. Besides, PCM improved the cytotoxic potential of DOX interfering on the migratory and clonogenic potential of PC-3 cells. Importantly, non-malignant bone cells were unaffected by the combination of PCM + DOX. Overall, these new findings may represent a new therapeutic approach for the management of bone metastatic prostate cancer in the future.

Improving Vascularization of Biomaterials for Skin and Bone Regeneration by Surface Modification: A Narrative Review on Experimental Research

Artificial tissue substitutes are of great interest for the reconstruction of destroyed and non-functional skin or bone tissue due to its scarcity. Biomaterials used as scaffolds for tissue regeneration are non-vascularized synthetic tissues and often based on polymers, which need ingrowth of new blood vessels to ensure nutrition and metabolism. This review summarizes previous approaches and highlights advances in vascularization strategies after implantation of surface-modified biomaterials for skin and bone tissue regeneration. The efficient integration of biomaterial, bioactive coating with endogenous degradable matrix proteins, physiochemical modifications, or surface geometry changes represents promising approaches. The results show that the induction of angiogenesis in the implant site as well as the vascularization of biomaterials can be influenced by specific surface modifications. The neovascularization of a biomaterial can be supported by the application of pro-angiogenic substances as well as by biomimetic surface coatings and physical or chemical surface activations. Furthermore, it was confirmed that the geometric properties of the three-dimensional biomaterial matrix play a central role, as they guide or even enable the ingrowth of blood vessels into a biomaterial.

Progress in Alternative Strategies to Combat Antimicrobial Resistance: Focus on Antibiotics

Antibiotic resistance, and, in a broader perspective, antimicrobial resistance (AMR), continues to evolve and spread beyond all boundaries. As a result, infectious diseases have become more challenging or even impossible to treat, leading to an increase in morbidity and mortality. Despite the failure of conventional, traditional antimicrobial therapy, in the past two decades, no novel class of antibiotics has been introduced. Consequently, several novel alternative strategies to combat these (multi-) drug-resistant infectious microorganisms have been identified. The purpose of this review is to gather and consider the strategies that are being applied or proposed as potential alternatives to traditional antibiotics. These strategies include combination therapy, techniques that target the enzymes or proteins responsible for antimicrobial resistance, resistant bacteria, drug delivery systems, physicochemical methods, and unconventional techniques, including the CRISPR-Cas system. These alternative strategies may have the potential to change the treatment of multi-drug-resistant pathogens in human clinical settings.

In vitro antibacterial and antibiofilm effects of cold atmospheric microwave plasma against Pseudomonas aeruginosa causing canine skin and ear infections

BACKGROUND

Pseudomonas aeruginosa is an opportunist pathogen that causes purulent inflammation in the skin and in the ears of dogs. Among the various virulence factors of P. aeruginosa, biofilms have been reported to result in antibiotic resistance, leading to therapeutic limitations. Cold atmospheric microwave plasma (CAMP) is known to have a high antimicrobial effect, which causes physical cell wall rupture and DNA damage.

HYPOTHESIS/OBJECTIVES

The objective of this study was to evaluate the antibacterial and antibiofilm effects of CAMP against planktonic bacteria and the biofilm of P. aeruginosa.

METHODS AND MATERIALS

The antibacterial effect of CAMP against P. aeruginosa ATCC10145 and clinical isolates (n = 30) was evaluated using the colony count method. We also assessed the effect of CAMP on biofilm of P. aeruginosa ATCC strain by the colony count method, water-soluble tetrazolium salt (WST) assay and confocal laser scanning microscopy (CLSM).

RESULTS

The complete eradication of P. aeruginosa (ATCC strain and clinical isolates) was achieved within 120 s at 50 W, and clinical isolates required 60 s shorter than the ATCC strain for complete eradication at 50 W. We also confirmed the time-dependent bactericidal effect of CAMP at 50 W against ATCC strain biofilm.

CONCLUSIONS AND CLINICAL IMPORTANCE

CAMP was effective against both planktonic bacteria and biofilm formation of P. aeruginosa. However, further studies on in vivo efficacy and safety in canine skin and ears are necessary to fully validate its clinical application.

Anti-Bacterial Action of Plasma Multi-Jets in the Context of Chronic Wound Healing

This work is a contribution to the development and implementation of non-thermal plasma technology for decontamination in the perspective of nosocomial and chronic wound innovative therapies. Multi jets devices based on Plasma Gun® technology in static and scanning operation modes and bacterial lawns inoculated with resistant and non-resistant bacterial strains were designed and used. A pilot toxicity study exploring plasma treatment of wound bearing patients, performed with a low voltage plasma applicator, is documented as a first step for the translation of in vitro experiments to clinical care. Bacterial inactivation was demonstrated for Staphylococcus aureus, Pseudomonas aeruginosa and drug resistant S. aureus, P. aeruginosa and Escherichia Coli strains collected from patient wounds at Orleans (France) hospital. A few square centimeter large contaminated samples were inactivated following a single plasma exposure as short as one minute. Samples inoculated with a single but also a mix of three resistant pathogens were successfully inactivated not only right after their contamination but for mature lawns as well. Similar bactericidal action was demonstrated for antibiotic-resistant and non-resistant P. aeruginosa. The time exposure dependent increase of the inhibition spots, following multi jets exposure, is discussed as either the accumulation of reactive species or the likely combinatory action of both the reactive species and transient electric field delivery on inoculated samples.

Promising strategies to control persistent enemies: Some new technologies to combat biofilm in the food industry-A review

Biofilm is an advanced form of protection that allows bacterial cells to withstand adverse environmental conditions. The complex structure of biofilm results from genetic-related mechanisms besides other factors such as bacterial morphology or substratum properties. Inhibition of biofilm formation of harmful bacteria (spoilage and pathogenic bacteria) is a critical task in the food industry because of the enhanced resistance of biofilm bacteria to stress, such as cleaning and disinfection methods traditionally used in food processing plants, and the increased food safety risks threatening consumer health caused by recurrent contamination and rapid deterioration of food by biofilm cells. Therefore, it is urgent to find methods and strategies for effectively combating bacterial biofilm formation and eradicating mature biofilms. Innovative and promising approaches to control bacteria and their biofilms are emerging. These new approaches range from methods based on natural ingredients to the use of nanoparticles. This literature review aims to describe the efficacy of these strategies and provide an overview of recent promising biofilm control technologies in the food processing sector.

Effect of Cold Atmospheric Plasma Jet Associated to Polyene Antifungals on Candida albicans Biofilms

The increasing incidence of antifungal resistance represents a great challenge in the medical area and, for this reason, new therapeutic alternatives for the treatment of fungal infections are urgently required. Cold atmospheric plasma (CAP) has been proposed as a promising alternative technique for the treatment of superficial candidiasis, with inhibitory effect both in vitro and in vivo. However, little is known on the association of CAP with conventional antifungals. The aim of this study was to evaluate the effects of the association between CAP and conventional polyene antifungals on Candida albicans biofilms. C. albicans SC 5314 and a clinical isolate were used to grow 24 or 48 h biofilms, under standardized conditions. After that, the biofilms were exposed to nystatin, amphotericin B and CAP, separately or in combination. Different concentrations of the antifungals and sequences of treatment were evaluated to establish the most effective protocol. Biofilms viability after the treatments was compared to negative control. Data were compared by One-way ANOVA and post hoc Tukey (5%). The results demonstrate that 5 min exposure to CAP showed more effective antifungal effect on biofilms when compared to nystatin and amphotericin B. Additionally, it was detected that CAP showed similar (but smaller in magnitude) effects when applied in association with nystatin and amphotericin B at 40 µg/mL and 60 µg/mL. Therefore, it can be concluded that the application of CAP alone was more effective against C. albicans biofilms than in combination with conventional polyene antifungal agents.

Cold Atmospheric Plasma Jet as a Possible Adjuvant Therapy for Periodontal Disease

Due to the limitations of traditional periodontal therapies, and reported cold atmospheric plasma anti-inflammatory/antimicrobial activities, plasma could be an adjuvant therapy to periodontitis. Porphyromonas gingivalis was grown in blood agar. Standardized suspensions were plated on blood agar and plasma-treated for planktonic growth. For biofilm, dual-species Streptococcus gordonii + P. gingivalis biofilm grew for 48 h and then was plasma-treated. XTT assay and CFU counting were performed. Cytotoxicity was accessed immediately or after 24 h. Plasma was applied for 1, 3, 5 or 7 min. In vivo: Thirty C57BI/6 mice were subject to experimental periodontitis for 11 days. Immediately after ligature removal, animals were plasma-treated for 5 min once-Group P1 (n = 10); twice (Day 11 and 13)-Group P2 (n = 10); or not treated-Group S (n = 10). Mice were euthanized on day 15. Histological and microtomography analyses were performed. Significance level was 5%. Halo diameter increased proportionally to time of exposure contrary to CFU/mL counting. Mean/SD of fibroblasts viability did not vary among the groups. Plasma was able to inhibit P. gingivalis in planktonic culture and biofilm in a cell-safe manner. Moreover, plasma treatment in vivo, for 5 min, tends to improve periodontal tissue recovery, proportionally to the number of plasma applications.

Cold atmospheric pressure plasma (CAPP) as a new alternative treatment method for onychomycosis caused by Trichophyton verrucosum: in vitro studies

PURPOSE

Anthropophilic dermatophytes as etiological factors of onychomycoses are more common than zoophilic fungi. In the case of the latter, reverse zoonoses are possible, which poses a threat to the persistence of dermatophytes in the environment. Nevertheless, without treatment, both types of tinea unguium may lead to complete nail plate destruction and secondary mixed infections with fungi and bacteria. One of the zoophilic dermatophytes that cause onychomycosis is Trichophyton verrucosum, whose prevalence has been increasing in recent years. Such infections are usually treated with allylamines and/or azoles, but such a conventional treatment of infections caused by T. verrucosum often fails or is discontinued by patients.

METHODS

Herein, we reveal the results of our in vitro studies related to direct application of cold atmospheric pressure plasma (CAPP) on Trichophyton verrucosum growth, germination and adherence to nail as a new alternative treatment method of such types of dermatomycoses.

RESULTS

Our in vitro studies showed that, while exposure to CAPP for 10 min delays germination of conidia and clearly impairs the fitness of the fungal structures, 15 min is enough to kill all fungal elements exposed to plasma. Moreover, the SEM images revealed that T. verrucosum cultures exposed to CAPP for 10 and 15 min were not able to invade the nail fragments.

CONCLUSION

The results revealed that single exposure to CAPP was able to inhibit T. verrucosum growth and infection capacity. Hence, cold atmospheric pressure plasma should be considered as a promising alternative treatment of onychomycoses.

Anti-biofouling efficacy of three home and personal care product preservatives: Pseudomonas aeruginosa biofilm inhibition and prevention

Due to increasing water scarcity, it is essential to determine cost-effective and efficient methods of producing potable water, especially ones that utilize non-traditional sources. Although reverse osmosis (RO) shows promise as a key-player in mitigating water scarcity, it is limited by biofouling. It is therefore integral to identify effective antifoulants that also do not damage the membrane, cause resistance, or negatively impact human health and the environment. Potential antifoulants include preservatives used in home and personal care products. It is hypothesized that safer preservatives can be applied to RO systems to remove or prevent biofouling. Three preservatives including methylisothiazolinone (MIT), phenoxyethanol (PE), and sodium benzoate (SB) were tested via antimicrobial susceptibility tests against P. aeruginosa biofilms grown in 96-well plates to investigate both biofilm prevention and biofilm removal. Data were collected in the form of minimum biofilm inhibitory concentration (MBIC) and minimum biofilm eradication concentration (MBEC), respectively. MIT was the most effective of the three preservatives but also poses the highest hazard to human health and the environment. Due to efficacy and safety concerns, MIT, PE, and SB are not the final solution; however, a process was demonstrated for determining the efficacy of novel, safer antifoulants. Ultimately, further investigations into safer antifoulants, paired with a greater understanding of biofilm removal and prevention doses will help make RO a better solution for water scarcity.

In vitro antimicrobial activity of cold atmospheric microwave plasma against bacteria causing canine skin and ear infections

BACKGROUND

Cold atmospheric plasma (CAP) is a new generation medical therapeutic option for bacterial infections. CAP causes physical cell wall rupture and DNA damage, therefore making it highly useful in the treatment of various conditions such as skin infections.

HYPOTHESIS/OBJECTIVES

The antimicrobial activity of cold atmospheric microwave plasma (CAMP) against major strains in canine skin infections was tested and the difference in antimicrobial activity between the antibiotic-resistant and antibiotic-susceptible strains of Staphylococcus pseudintermedius was evaluated.

METHODS AND MATERIALS

American Type Culture Collection (ATCC) strains (Staphylococcus aureus, Pseudomonas aeruginosa and Escherichia coli) and clinical isolates identified as methicillin-resistant S. pseudintermedius (n = 27) and methicillin-susceptible S. pseudintermedius (n = 13) were exposed to CAMP for 10 s, 30 s and 60 s. Afterwards, the bacterial survival rate was confirmed.

RESULTS

Gram-negative bacteria (P. aeruginosa and E. coli) were more susceptible than Gram-positive bacteria (S. aureus and S. pseudintermedius) for the same duration of CAMP exposure. Only the Gram-negative bacteria were completely killed after 60 s exposure. In S. pseudintermedius isolates, CAMP exposure had similar antibacterial effects regardless of antibiotic resistance.

CONCLUSIONS AND CLINICAL IMPORTANCE

CAMP has sufficient antimicrobial activity against major bacterial strains that cause pyoderma and otitis externa in dogs, and may be an alternative therapeutic option for S. pseudintermedius skin infections, for which antibiotics often are ineffective because of antimicrobial resistance in clinical veterinary medicine.

Inhibitory Effect of Cold Atmospheric Plasma on Chronic Wound-Related Multispecies Biofilms

The presence of microbial biofilms in the wounds affects negatively the healing process and can contribute to therapeutic failures. This study aimed to establish the effective parameters of cold atmospheric plasma (CAP) against wound-related multispecies and monospecies biofilms, and to evaluate the cytotoxicity and genotoxicity of the protocol. Monospecies and multispecies biofilms were formed by methicillin-resistant Staphylococcus aureus (MRSA), Pseudomonas aeruginosa and Enterococcus faecalis. The monospecies biofilms were grown in 96 wells plates and multispecies biofilm were formed on collagen membranes. The biofilms were exposed to helium CAP for 1, 3, 5 and 7 min. In monospecies biofilms, the inhibitory effect was detected after 1 min of exposure for E. faecalis and after 3 min for MRSA. A reduction in P. aeruginosa biofilm’s viability was detected after 7 min of exposure. For the multispecies biofilms, the reduction in the overall viability was detected after 5 min of exposure to CAP. Additionally, cytotoxicity and genotoxicity were evaluated by MTT assay and static cytometry, respectively. CAP showed low cytotoxicity and no genotoxicity to mouse fibroblastic cell line (3T3). It could be concluded that He-CAP showed inhibitory effect on wound-related multispecies biofilms, with low cytotoxicity and genotoxicity to mammalian cells. These findings point out the potential application of CAP in wound care.

The Effects of Plasma-Activated Water on Heavy Metals Accumulation in Water Spinach

Toxic heavy metals accumulate in crops from the environment through different routes and may interfere with biochemical reactions in humans, causing serious health consequences. Plasma technology has been assessed for the promotion of seed germination and plant growth in several past studies. Therefore, the aim of the present study was to evaluate whether the growth rate of plants can be increased with the application of non-thermal plasma, as well as to reduce the accumulation of heavy metals in leafy vegetables (water spinach). In this study, several kinds of plasma treatments were applied, such as treatment on the seeds (PTS + NTW), irrigation water (NTS + PAW) or both (PTS + PAW). The results of the study showed that the heavy metals accumulated in water spinach were affected by the heavy metals available in the soil. The bioconcentration factor (BCF) of Cd in water spinach decreased from 0.864 to 0.543 after plasma treatment in seed or irrigating water, while the BCF of Pb was low and did not show any significant changes. Therefore, the results suggest that plasma treatment may suppress Cd absorption, but not for Pb. In this study, plasma treatment did not help to improve the product yield of water spinach planted in Cd-added soil. In the future, fertilizers can be used to supply nutrients that are not provided by plasma-activated water to support the growth of water spinach.

Applications of Cold Atmospheric Pressure Plasma Technology in Medicine, Agriculture and Food Industry

In recent years, cold atmospheric pressure plasma (CAPP) technology has received substantial attention due to its valuable properties including operational simplicity, low running cost, and environmental friendliness. Several different gases (air, nitrogen, helium, argon) and techniques (corona discharge, dielectric barrier discharge, plasma jet) can be used to generate plasma at atmospheric pressure and low temperature. Plasma treatment is routinely used in materials science to modify the surface properties (e.g., wettability, chemical composition, adhesion) of a wide range of materials (e.g., polymers, textiles, metals, glasses). Moreover, CAPP seems to be a powerful tool for the inactivation of various pathogens (e.g., bacteria, fungi, viruses) in the food industry (e.g., food and packing material decontamination, shelf life extension), agriculture (e.g., disinfection of seeds, fertilizer, water, soil) and medicine (e.g., sterilization of medical equipment, implants). Plasma medicine also holds great promise for direct therapeutic treatments in dentistry (tooth bleaching), dermatology (atopic eczema, wound healing) and oncology (melanoma, glioblastoma). Overall, CAPP technology is an innovative, powerful and effective tool offering a broad application potential. However, its limitations and negative impacts need to be determined in order to receive regulatory approval and consumer acceptance.

Evaluation of the effects of cold atmospheric plasma and plasma-treated liquids in cancer cell cultures

Cold atmospheric plasma (CAP) is a potential anticancer therapy. CAP has cytotoxic effects when applied either directly to cancer cell cultures or indirectly through plasma-conditioned liquids. This protocol describes how to treat adherent cultures of human cancer cell lines with CAP or plasma-conditioned medium and determine cell viability following treatment. The protocol also includes details on how to quantify the reactive oxygen and nitrogen species present in medium following CAP treatment, using chemical probes using UV-visible or fluorescence spectroscopy. CAP treatment takes ~30 min, and 3 h are required to complete quantification of reactive oxygen and nitrogen species. By providing a standardized protocol for evaluation of the effects of CAP and plasma-conditioned medium, we hope to facilitate the comparison and interpretation of results seen across different laboratories.

Reactive, Inelastic, and Dissociation Processes in Collisions of Atomic Nitrogen with Molecular Oxygen

Collisions of atomic nitrogen with molecular oxygen have been treated with the quasiclassical trajectory method (QCT) in order to obtain a complete database of vibrationally detailed cross sections and rate coefficients for reactive, inelastic, and dissociation processes. For reaction rate coefficients, the agreement with experimental and theoretical data in the literature is excellent on the whole available interval 300-5000 K, with reliable extension to 20,000 K. For the inelastic case and for dissociation, no comparisons are available; therefore, a study of QCT reliability is proposed. In the inelastic case, it is found that "purely inelastic" and "quasireactive" collisions show not only different mechanisms but also different QCT levels of reliability at low energy. For dissociation, similar considerations bring to the conclusion that for the present collisional system, the QCT method is appropriate on the whole energy range studied. Rate coefficients for all the processes studied are provided in the electronic form.

Inactivation of Listeria monocytogenes and Salmonella on Stainless Steel by a Piezoelectric Cold Atmospheric Plasma Generator

Cold atmospheric pressure plasma (CAP) is a novel non-thermal technology that is gaining increasing importance as a decontamination method. Stainless steel is a widespread food contact surface used in food-processing environments. In this study, for the first time, a low-voltage piezoelectric CAP device that uses ambient air was assessed for its antimicrobial efficiency against Salmonella and Listeria monocytogenes. These inoculated on stainless steel at different exposure times (0–300 s), two different distances (10 and 20 mm), and two different cleanliness levels (clean and protein-soiled). Two inactivation models were compared to study the inactivation kinetics of the pathogens. The results showed that CAP treatment effectively reduced L. monocytogenes and Salmonella levels. The Weibull + tail model showed better goodness of fit than the Weibull model. Protein-soiled coupons showed a protective effect to cold plasma inactivation achieving lower reductions compared to clean stainless-steel coupons for both L. monocytogenes and Salmonella. Longer distances from the plasma source decreased the decontamination efficiency of CAP; however, the difference in pathogen reduction was less pronounced at longer exposure times. This study demonstrates the capacity of a low-voltage piezoelectric CAP device to effectively reduce the levels of both foodborne pathogens on stainless-steel surfaces and the potential to adopt this technology by the food industry as a disinfection process of surfaces to reduce cross-contamination and thus increase safety.

Surface barrier discharges for Escherichia coli biofilm inactivation: Modes of action and the importance of UV radiation

Cold plasma generated in air at atmospheric pressure is an extremely effective antimicrobial agent, with proven efficacy against clinically relevant bacterial biofilms. The specific mode of bacterial inactivation is highly dependent upon the configuration of the plasma source used. In this study, the mode of microbial inactivation of a surface barrier discharge was investigated against Escherichia coli biofilms grown on polypropylene coupons. Different modes of exposure were considered and it was demonstrated that the long-lived reactive species created by the plasma are not solely responsible for the observed microbial inactivation. It was observed that a synergistic interaction occurs between the plasma generated long-lived reactive species and ultraviolet (UV) photons, acting to increase the antimicrobial efficacy of the approach by an order of magnitude. It is suggested that plasma generated UV is an important component for microbial inactivation when using a surface barrier discharge; however, it is not through the conventional pathway of direct DNA damage, rather through the synergistic interaction between liquid in the biofilm matrix and long-lived chemical species created by the discharge.

Applications of Cold Atmospheric Pressure Plasma in Dentistry

Plasma is an electrically conducting medium that responds to electric and magnetic fields. It consists of large quantities of highly reactive species, such as ions, energetic electrons, exited atoms and molecules, ultraviolet photons, and metastable and active radicals. Non-thermal or cold plasmas are partially ionized gases whose electron temperatures usually exceed several tens of thousand degrees K, while the ions and neutrals have much lower temperatures. Due to the presence of reactive species at low temperature, the biological effects of non-thermal plasmas have been studied for application in the medical area with promising results. This review outlines the application of cold atmospheric pressure plasma (CAPP) in dentistry for the control of several pathogenic microorganisms, induction of anti-inflammatory, tissue repair effects and apoptosis of cancer cells, with low toxicity to healthy cells. Therefore, CAPP has potential to be applied in many areas of dentistry such as cariology, periodontology, endodontics and oral oncology.

Development of Antimicrobial Phototreatment Tolerance: Why the Methodology Matters

Due to rapidly growing antimicrobial resistance, there is an urgent need to develop alternative, non-antibiotic strategies. Recently, numerous light-based approaches, demonstrating killing efficacy regardless of microbial drug resistance, have gained wide attention and are considered some of the most promising antimicrobial modalities. These light-based therapies include five treatments for which high bactericidal activity was demonstrated using numerous in vitro and in vivo studies: antimicrobial blue light (aBL), antimicrobial photodynamic inactivation (aPDI), pulsed light (PL), cold atmospheric plasma (CAP), and ultraviolet (UV) light. Based on their multitarget activity leading to deleterious effects to numerous cell structures-i.e., cell envelopes, proteins, lipids, and genetic material-light-based treatments are considered to have a low risk for the development of tolerance and/or resistance. Nevertheless, the most recent studies indicate that repetitive sublethal phototreatment may provoke tolerance development, but there is no standard methodology for the proper evaluation of this phenomenon. The statement concerning the lack of development of resistance to these modalities seem to be justified; however, the most significant motivation for this review paper was to critically discuss existing dogma concerning the lack of tolerance development, indicating that its assessment is more complex and requires better terminology and methodology.

The emerging potential of cold atmospheric plasma in skin biology

The maintenance of skin integrity is crucial to ensure the physiological barrier against exogenous compounds, microorganisms and dehydration but also to fulfill social and aesthetic purposes. Besides the development of new actives intended to enter a formulation, innovative technologies based on physical principles have been proposed in the last years. Among them, Cold Atmospheric Plasma (CAP) technology, which already showed interesting results in dermatology, is currently being studied for its potential in skin treatments and cares. CAP bio-medical studies gather several different expertise ranging from physics to biology through chemistry and biochemistry, making this topic hard to pin. In this review we provide a broad survey of the interactions between CAP and skin. In the first section, we tried to give some fundamentals on skin structure and physiology, related to its essential functions, together with the main bases on cold plasma and its physicochemical properties. In the following parts we dissected and analyzed each CAP parameter to highlight the already known and the possible effects they can play on skin. This overview aims to get an idea of the potential of cold atmospheric plasma technology in skin biology for the future developments of dermo-cosmetic treatments, for example in aging prevention.

Morphological and physiological changes in Lentilactobacillus hilgardii cells after cold plasma treatment

Atmospheric cold plasma (ACP) inactivation of Lentilactobacillus hilgardii was investigated. Bacteria were exposed to ACP dielectric barrier discharge with helium and oxygen as working gases for 5, 10, and 15 min. The innovative approach in our work for evaluation of bacterial survival was the use in addition to the classical plate culture method also flow cytometry which allowed the cells to be sorted and revealed different physiological states after the plasma treatment. Results showed total inhibition of bacterial growth after 10-min of ACP exposure. However, the analysis of flow cytometry demonstrated the presence of 14.4% of active cells 77.5% of cells in the mid-active state and 8.1% of dead cells after 10 min. In addition, some of the cells in the mid-active state showed the ability to grow again on culture medium, thus confirming the hypothesis of induction of VBNC state in L .hilgardii cells by cold plasma. In turn, atomic force microscopy (AFM) which was used to study morphological changes in L. hilgardii after plasma treatment at particular physiological states (active, mid-active, dead), showed that the surface roughness of the mid-active cell (2.70 ± 0.75 nm) was similar to that of the control sample (2.04 ± 0.55 nm). The lack of considerable changes on the cell surface additionally explains the effective cell resuscitation. To the best of our knowledge, AFM was used for the first time in this work to analyze cells which have been sorted into subpopulations after cold plasma treatment and this is the first work indicating the induction of VBNC state in L. hilgardii cells after exposure to cold plasma.

Antibiotic-Resistant and Non-Resistant Bacteria Display Similar Susceptibility to Dielectric Barrier Discharge Plasma

Here, we examined whether antibiotic-resistant and non-resistant bacteria show a differential susceptibility to plasma treatment. Escherichia coli DH5α were transformed with pPRO-EX-HT-CAT, which encodes an ampicillin resistance gene and chloramphenicol acetyltransferase (CAT) gene, and then treated with a dielectric barrier discharge (DBD) plasma torch. Plasma treatment reduced the viable cell count of E. coli after transformation/selection and further cultured in ampicillin-containing and ampicillin-free medium. However, there was no significant difference in viable cell count between the transformed and untransformed E. coli after 1 min- and 2 min-plasma treatment. Furthermore, the enzyme-linked immunosorbent assay (ELISA) and acetyltransferase activity assay showed that the CAT activity was reduced after plasma treatment in both transformed and selected E. coli grown in ampicillin-containing or ampicillin-free medium. Loss of lipopolysaccharide and DNA damage caused by plasma treatment were confirmed by a Limulus test and polymerase chain reaction, respectively. Taken together, these findings suggest the plasma acts to degrade components of the bacteria and is therefore unlikely to display a differential affect against antibiotic-resistant and non-resistant bacteria. Therefore, the plasma method may be useful in eliminating bacteria that are recalcitrant to conventional antibiotic therapy.

Indirect, Non-Thermal Atmospheric Plasma Promotes Bacterial Killing in vitro and Wound Disinfection in vivo Using Monogenic and Polygenic Models of Type 2 Diabetes (Without Adverse Metabolic Complications)

A novel atmospheric plasma device that uses indirect, non-thermal plasma generated from room air is being studied for its effects on wound disinfection in animal wounds of monogenic and polygenic murine models of type 2 diabetes. As a proof-of-concept report, the goal of this study was to demonstrate the efficacy and safety of the indirect non-thermal plasma (INTP) device in disinfecting polycarbonate filters established with Pseudomonas aeruginosa (PAO1) biofilms as well as wound disinfection in diabetic murine wounds. Dorsal excisional wounds in BALB/c, polygenic TALLYHO, and monogenic db/db mice established with PAO1 infection all demonstrated a 3-log colony-forming unit (CFU) reduction when subjected to a course of 20-min INTP treatments. Importantly, blood glucose and body weights in these animals were not significantly impacted by plasma treatment over the study period. Plasma safety was also analyzed via complete blood count and comprehensive metabolic panels, showing no deleterious systemic effects after 3 consecutive days of 20-min plasma applications. Therefore, the results obtained demonstrated the Pseudomonas aeruginosa isolates were highly sensitive to INTP in vitro, CFU reduction of infectious Pseudomonas in wounds of diabetic mice after INTP treatment is far superior to that of non-treated infected wounds, and the application of INTP shows no indication of toxic effects. Our results are consistent with indirect non-thermal atmospheric plasma as a promising adjunct to disinfecting wounds.

Fighting Mixed-Species Microbial Biofilms With Cold Atmospheric Plasma

Most biofilms in nature are formed by multiple microbial species, and such mixed-species biofilms represent the actual lifestyles of microbes, including bacteria, fungi, viruses (phages), and/or protozoa. Microorganisms cooperate and compete in mixed-species biofilms. Mixed-species biofilm formation and environmental resistance are major threats to water supply, food industry, and human health. The methods commonly used for microbial eradication, such as antibiotic or disinfectant treatments, are often ineffective for mixed-species biofilm consortia due to their physical matrix barrier and physiological interactions. For the last decade, an increasing number of investigations have been devoted to the usage of cold atmospheric plasma (CAP), which is produced by dielectric barrier discharges or plasma jets to prevent or eliminate microbial biofilms. Here, we summarized the production of CAP, the inactivation of microorganisms upon CAP treatment, and the microbial factors affecting the efficacy of CAP procedure. The applications of CAP as antibiotic alternative strategies for fighting mixed-species biofilms were also addressed.

Plasma Medicine: A Field of Applied Redox Biology

Plasma medicine comprises the application of physical plasma directly on or in the human body for therapeutic purposes. Three most important basic plasma effects are relevant for medical applications: i) inactivation of a broad spectrum of microorganisms, including multidrug-resistant pathogens, ii) stimulation of cell proliferation and angiogenesis with lower plasma treatment intensity, and iii) inactivation of cells by initialization of cell death with higher plasma treatment intensity, above all in cancer cells. Based on own published results as well as on monitoring of relevant literature the aim of this topical review is to summarize the state of the art in plasma medicine and connect it to redox biology. One of the most important results of basic research in plasma medicine is the insight that biological plasma effects are mainly mediated via reactive oxygen and nitrogen species influencing cellular redox-regulated processes. Plasma medicine can be considered a field of applied redox biology.

Parameters Affecting the Antimicrobial Properties of Cold Atmospheric Plasma Jet

Using the Taguchi method to narrow experimental parameters, the antimicrobial efficiency of a cold atmospheric plasma jet (CAPJ) treatment was investigated. An L9 array with four parameters of CAPJ treatments, including the application voltage, CAPJ-sample distance, argon (Ar) gas flow rate, and CAPJ treatment time, were applied to examine the antimicrobial activity against Escherichia coli (E. coli). CAPJ treatment time was found to be the most influential parameter in its antimicrobial ability by evaluation of signal to noise ratios and analysis of variance. 100% bactericidal activity was achieved under the optimal bactericidal activity parameters including the application voltage of 8.5 kV, CAPJ-sample distance of 10 mm, Ar gas flow rate of 500 sccm, and CAPJ treatment time of 300 s, which confirms the efficacy of the Taguchi method in this design. In terms of the mechanism of CAPJ's antimicrobial ability, the intensity of hydroxyl radical produced by CAPJ positively correlated to its antimicrobial efficiency. The CAPJ antimicrobial efficiency was further evaluated by both DNA double-strand breaks analysis and scanning electron microscopy examination of CAPJ treated bacteria. CAPJ destroyed the cell wall of E. coli and further damaged its DNA structure, thus leading to successful killing of bacteria. This study suggests that optimal conditions of CPAJ can provide effective antimicrobial activity and may be grounds for a novel approach for eradicating bacterial infections.