Metformin-loaded alginate nanoparticles as an effective antidiabetic agent for controlled drug release

Sodium Alginate-Starch Capsules for Enhanced Stability of Metformin in Simulated Gastrointestinal Fluids

The use of biopolymers in pharmaceuticals is well established, particularly for encapsulating biologically active compounds due to their beneficial properties. Alginate, widely recognized for its excellent encapsulation abilities, is the most commonly used biopolymer, while starch, typically known as insoluble dietary fiber, also serves as an effective agent for trapping and protecting compounds during processing, storage, and gastrointestinal transit. Sodium alginate-starch capsules with varying compositions were analyzed to develop metformin hydrochloride (MET) containing capsules with adequate physicochemical properties. In vitro testing with simulated gastrointestinal fluids showed that after 1 h, capsules with equal amounts of alginate and starch had a higher swelling ratio and better drug release behavior, despite lower MET entrapment efficiency compared to other formulations. Microstructural analysis revealed stability in simulated gastric fluids and solubility in simulated intestinal fluids, key factors in drug development. The results suggest that these biopolymeric compositions are highly resistant to gastric fluids and minimally soluble in the intestines, making them suitable for extended drug release. This research evaluates key technological parameters of a cost-effective encapsulation method for the controlled release of active substances, providing a versatile solution for pharmaceutical and biomedical applications.

Preparation and Characterization of Zein-Metformin/Gelatin Nanofibers by Coaxial Electrospinning

Metformin is a drug commonly used for the treatment of type 2 diabetes. However, it has been associated with damaging side effects when used over a long period of time. A potential solution to this problem is the implementation of a prolonged-release system for metformin, which would enhance the efficiency of the doses administered to patients. To achieve this, it is necessary to use materials compatible with humans. Electrospinning is an efficient technique that can be employed for this purpose, utilizing solvents that are safe for human use. Therefore, the objective of this study was to prepare and characterize a system for the prolonged release of metformin from zein and gelatin through coaxial electrospinning as well as to investigate its in vitro release. Metformin-loaded zein/gelatin coaxial nanofibers were prepared using the coaxial electrospinning technique and then characterized by morphological, structural, and thermal analysis. Morphologically, metformin-loaded zein/gelatin coaxial nanofibers were obtained with an average diameter of 322.6 ± 44.5 nm and a smooth surface. Fourier transform infrared spectroscopy (FTIR) analysis showed band shifts at a higher wavenumber due to drug-protein interactions by hydrogen bonding between N-H and C=O groups. Thermal gravimetric analysis (TGA) results suggested a possible interaction between materials due to an increase in the degradation temperatures of zein and gelatin when metformin was included. The transition of the crystallinity of metformin to the amorphous form was also confirmed by differential scanning calorimetry (DSC). Coaxial nanofibers exhibited an encapsulation efficiency of 66% and a profile release that showed an initial release of metformin (40%) in the first hour, followed by a gradual release until it reached equilibrium at 60 h and a cumulative release of 97% of metformin. It was concluded that using the coaxial electrospinning technique, it is possible to obtain nanofibers from polymeric solutions of zein and gelatin to encapsulate metformin, with a potential application as a prolonged-release system.

Biodegradable Polymeric Nanoparticle-Based Drug Delivery Systems: Comprehensive Overview, Perspectives and Challenges

In the last few decades, there has been a growing interest in the use of biodegradable polymeric nanoparticles (BPNPs) as the carriers for various therapeutic agents in drug delivery systems. BPNPs have the potential to improve the efficacy of numerous active agents by facilitating targeted delivery to a desired site in the body. Biodegradable polymers are especially promising nanocarriers for therapeutic substances characterized by poor solubility, instability, rapid metabolism, and rapid system elimination. Such molecules can be efficiently encapsulated and subsequently released from nanoparticles, which greatly improves their stability and bioavailability. Biopolymers seem to be the most suitable candidates to be used as the nanocarriers in various delivery platforms, especially due to their biocompatibility and biodegradability. Other unique properties of the polymeric nanocarriers include low cost, flexibility, stability, minimal side effects, low toxicity, good entrapment potential, and long-term and controlled drug release. An overview summarizing the research results from the last years in the field of the successful fabrication of BPNPs loaded with various therapeutic agents is provided. The possible challenges involving nanoparticle stability under physiological conditions and the possibility of scaling up production while maintaining quality, as well as the future possibilities of employing BPNPs, are also reviewed.

Advances in metformin-delivery systems for diabetes and obesity management

Metformin is a medication that is commonly prescribed to manage type 2 diabetes. It has been used for more than 60 years and is highly effective in lowering blood glucose levels. Recent studies indicate that metformin may have additional medical benefits beyond treating diabetes, revealing its potential therapeutic uses. Oral medication is commonly used to administer metformin because of its convenience and cost-effectiveness. However, there are challenges in optimizing its effectiveness. Gastrointestinal side effects and limitations in bioavailability have led to the underutilization of metformin. Innovative drug-delivery systems such as fast-dissolving tablets, micro/nanoparticle formulations, hydrogel and microneedles have been explored to optimize metformin therapy. These strategies enhance metformin dosage, targeting, bioavailability and stability, and provide personalized treatment options for improved glucose homeostasis, antiobesity and metabolic health benefits. Developing new delivery systems for metformin shows potential for improving therapeutic outcomes, broadening its applications beyond diabetes management and addressing unmet medical needs in various clinical settings. However, it is important to improve drug-delivery systems, addressing issues such as complexity, cost, biocompatibility, stability during storage and transportation, loading capacity, required technologies and biomaterials, targeting precision and regulatory approval. Addressing these limitations is crucial for effective, safe and accessible drug delivery in clinical practice. In this review, recent advances in the development and application of metformin-delivery systems for diabetes and obesity are discussed.

Advancements in Plant-Based Therapeutics for Hepatic Fibrosis: Molecular Mechanisms and Nanoparticulate Drug Delivery Systems

Chronic liver injuries often lead to hepatic fibrosis, a condition characterized by excessive extracellular matrix accumulation and abnormal connective tissue hyperplasia. Without effective treatment, hepatic fibrosis can progress to cirrhosis or hepatocellular carcinoma. Current treatments, including liver transplantation, are limited by donor shortages and high costs. As such, there is an urgent need for effective therapeutic strategies. This review focuses on the potential of plant-based therapeutics, particularly polyphenols, phenolic acids, and flavonoids, in treating hepatic fibrosis. These compounds have demonstrated anti-fibrotic activities through various signaling pathways, including TGF-β/Smad, AMPK/mTOR, Wnt/β-catenin, NF-κB, PI3K/AKT/mTOR, and hedgehog pathways. Additionally, this review highlights the advancements in nanoparticulate drug delivery systems that enhance the pharmacokinetics, bioavailability, and therapeutic efficacy of these bioactive compounds. Methodologically, this review synthesizes findings from recent studies, providing a comprehensive analysis of the mechanisms and benefits of these plant-based treatments. The integration of novel drug delivery systems with plant-based therapeutics holds significant promise for developing effective treatments for hepatic fibrosis.

Nanomaterials for diabetes: diagnosis, detection and delivery

537 million people worldwide suffer from diabetes mellitus, a problem of glucose management that is related to a number of major health risks, including cardiovascular diseases. There is a need for new, efficient formulations of diabetic medications to address this condition and its related consequences because existing treatments have a number of drawbacks and limits. This encouraged the development of treatment plans to get around some of these restrictions, like low therapeutic drug bioavailability or patients' disobedience to existing therapies. Approaches based on nanotechnology have a lot of promise to enhance the treatment of diabetic patients. In order to manage blood glucose, this review article highlights recent developments and explores the potential applications of different materials (polymeric, ceramic, dendrimers, etc.) as nanocarriers for the delivery of insulin and other antidiabetic medications. Using an injectable and acid-degradable polymeric network produced by the electrostatic interaction of oppositely charged dextran nanoparticles loaded with insulin and glucose-specific enzymes, we reviewed a glucose-mediated release approach for the self-regulated delivery of insulin, in which, after a degradable nano-network was subcutaneously injected into type 1 diabetic mice,in vivoexperiments confirmed that these formulations improved glucose management. In addition, a discussion of silica-based nanocarriers, their potential for treating diabetes and controlling blood glucose levels, and an explanation of the role of dendrimers in diabetes treatment have been covered. This is done by utilizing the properties of silica nanoparticles, such as their tuneable particle and pore size, surface chemistry, and biocompatibility. The article summarized the significance of nanomaterials and their uses in the diagnosis and treatment of diabetes overall, illuminating the field's potential and outlining its prospects for the future.

Multiple nanotechnological approaches using natural compounds for diabetes management

Objectives

Diabetes mellitus (DM) is a long-standing and non-transmissible endocrine disease that generates significant clinical issues and currently affects approximately 400 million people worldwide. The aim of the present review was to analyze the most relevant and recent studies that focused on the potential application of plant extracts and phytocompounds in nanotechnology for the treatment of T2DM.

Methods

Various databases were examined, including Springer Link, Google Scholar, PubMed, Wiley Online Library, and Science Direct. The search focused on discovering the potential application of nanoparticulate technologies in enhancing drug delivery of phytocompounds for the mentioned condition.

Results

Several drug delivery systems have been considered, that aimed to reduce adverse effects, while enhancing the efficiency of oral antidiabetic medications. Plant-based nanoformulations have been highlighted as an innovative approach for DM treatment due to their eco-friendly and cost-effective synthesis methods. Their benefits include targeted action, enhanced availability, stability, and reduced dosage frequency.

Conclusions

Nanomedicine has opened new opportunities for the diagnosis, treatment, and prevention of DM. The use of nanomaterials has demonstrated improved outcomes for both T1DM and T2DM. Notably, flavonoids, including substances such as quercetin, naringenin and myricitrin, have been recognized for their enhanced efficacy when delivered through novel nanotechnologies in preventing T2DM onset and associated complications. The perspectives on the addressed subject point to the development of more nanostructured phytocompounds with improved bioavailability and therapeutic efficacy.

Oral administration of proniosomal glibenclamide formulation protects testicular tissue from hyperglycemia fluctuations and ROS via Nrf2/HO-1 pathway

Type 2 diabetes causes high blood sugar due to insulin malfunction and is linked to male infertility. Using proniosomes can enhance the effectiveness of Glibenclamide, a medication that stimulates insulin secretion. In our study, male rats with diabetes were treated with GLB with or without proniosomal for 14 days. Proniosomal formulations maintained glucose levels prevented weight loss and showed normal testicular tissue. GLB-proniosomal reduces ROS caused by T2DM through Nrf2, HO-1 pathway and increases CAT, SOD, and GSH production in response to insulin and glucose uptake. The reference and proniosomal treatments showed CAT and SOD significant enzymatic elevation compared to the positive and negative control. CAT significantly correlated with Gpx4 expression with P = 0.0169 and r = 0.98; similarly, the enzymatic activity of SOD also showed a positive correlation between the average glucose levels (r = 0.99 and P = 0.0037). Intestinally, GSH analysis revealed that only proniosomal-GLB samples are significantly elevated from the positive control, with a P value of 0.0210. The data showed proniosomal-GLB was more effective than pure GLB, confirmed by higher Nrf2 (2.050 folds), HO-1 (2.148 folds), and GPx4 (1.9 folds) transcript levels relative to the control with less sample diversity compared to the reference samples, indicating proniosomal stabilized GLB in the blood. Administering GLB and proniosomes formulation has effectively restored testicular function and sperm production in diabetic rats by regulating ROS levels and upregulating anti-ROS in response to glucose uptake. These findings may lead to better treatments for diabetic patients who have infertility issues.

Current developments and future perspectives of nanotechnology in orthopedic implants: an updated review

Orthopedic implants are the most commonly used fracture fixation devices for facilitating the growth and development of incipient bone and treating bone diseases and defects. However, most orthopedic implants suffer from various drawbacks and complications, including bacterial adhesion, poor cell proliferation, and limited resistance to corrosion. One of the major drawbacks of currently available orthopedic implants is their inadequate osseointegration at the tissue-implant interface. This leads to loosening as a result of immunological rejection, wear debris formation, low mechanical fixation, and implant-related infections. Nanotechnology holds the promise to offer a wide range of innovative technologies for use in translational orthopedic research. Nanomaterials have great potential for use in orthopedic applications due to their exceptional tribological qualities, high resistance to wear and tear, ability to maintain drug release, capacity for osseointegration, and capability to regenerate tissue. Furthermore, nanostructured materials possess the ability to mimic the features and hierarchical structure of native bones. They facilitate cell proliferation, decrease the rate of infection, and prevent biofilm formation, among other diverse functions. The emergence of nanostructured polymers, metals, ceramics, and carbon materials has enabled novel approaches in orthopaedic research. This review provides a concise overview of nanotechnology-based biomaterials utilized in orthopedics, encompassing metallic and nonmetallic nanomaterials. A further overview is provided regarding the biomedical applications of nanotechnology-based biomaterials, including their application in orthopedics for drug delivery systems and bone tissue engineering to facilitate scaffold preparation, surface modification of implantable materials to improve their osteointegration properties, and treatment of musculoskeletal infections. Hence, this review article offers a contemporary overview of the current applications of nanotechnology in orthopedic implants and bone tissue engineering, as well as its prospective future applications.

Co-emulsified Alginate-Eudragit Nanoparticles: Potential Carriers for Localized and Time-defined Release of Tenofovir in the Female Genital Tract

This research aimed to explore the possibilities of Eudragit S100 (ES100) and sodium alginate as carriers for tenofovir disoproxil fumarate (TDF) in the female genital tract. Alginate and alginate-ES100 nanoparticles were prepared using the ionic gelation and emulsion/gelation complexation method, respectively. The nanocarriers were tested using morphological, physicochemical, in vitro drug release, and cytotoxicity analyses. In SEM and TEM images, the presence of spherical and uniformly distributed nanoparticles was revealed. The FTIR spectrum showed that alginate and calcium chloride interacted due to ionic bonds linking divalent calcium ions and the -COO- of alginate groups. Alginate and ES100 interacted via the ester C=O amide stretching. The results obtained from XRD and DSC, on the other hand, revealed a favorable interaction between sodium alginate and ES100 polymers, as evidenced by the crystallization peaks observed. Under experimental design analysis and optimization, overall size distribution profiles ranged from 134.9 to 228.0 nm, while zeta potential results showed stable nanoparticles (-17.8 to -38.4 MV). The optimal formulation exhibited a maximum cumulative in vitro release of 72% (pH 4.2) up to 96 h. The cytotoxicity tests revealed the safety of TDF-loaded nanoparticles on vaginal epithelial cells at concentrations of 0.025 mg/mL, 0.5 mg/mL, and 1 mg/mL for 72 h. These results indicated that alginate-ES100 nanoparticles have the potential to preserve and sustain the release of the TDF drug in the FGT. The future goal is to develop a low-dose non-toxic microbicide that can be administered long term in the vagina to cater to both pregnant and non-pregnant HIV patients.

Synthesis and bioactivity assessment of Coccinia grandis L. extract encapsulated alginate nanoparticles as an antidiabetic drug lead

AIM

This study aimed to prepare, characterise, and evaluate the antidiabetic activity of Coccinia grandis (L.) extracts encapsulated alginate nanoparticles.

METHODS

Alginate nanoparticles were prepared using the ionic gelation method and characterised by encapsulation efficiency %w/w, loading capacity %w/w, particle size analysis, zeta potential, Fourier transform infra-red spectroscopy (FTIR), and scanning electron microscopy (SEM). In vitro antidiabetic activity was also evaluated.

RESULTS

Encapsulation efficiency %w/w, loading capacity %w/w, mean diameter, zeta potential of C. grandis encapsulated alginate nanoparticles ranged from 10.51 ± 0.51 to 62.01 ± 1.28%w/w, 0.39 ± 0.04 to 3.12 ± 0.11%w/w, 191.9 ± 76.7 to 298.9 ± 89.6 nm, -21.3 ± 3.3 to -28.4 ± 3.4 mV, respectively. SEM and FTIR confirmed that particles were in nano range with spherical shape and successful encapsulation of plant extracts into an alginate matrix. The antidiabetic potential of aqueous extract of C. grandis encapsulated alginate nanoparticles (AqCG-ANP) exhibited inhibition in α-amylase, α-glucosidase and dipeptidyl peptidase IV enzymes of 60.8%c/c, 19.1%c/c, and 30.3%c/c, respectively, compared to the AqCG.

CONCLUSION

The AqCG-ANP exerted promising antidiabetic potential as an antidiabetic drug lead.

Melatonin and metformin co-loaded nanoliposomes efficiently attenuate liver damage induced by bile duct ligation in rats

In the current study, the therapeutic effectiveness of the metformin (Met) and melatonin (Mel) co-loaded liposomes was investigated on cholestasis induced by bile duct ligation (BDL) in male rats. Histopathological analysis, biochemical analysis, and oxidative stress markers were assayed to determine the therapeutic effect of Met and Mel co-loaded liposomes on cholestasis. Histopathological analysis revealed that the simultaneous administration of Met and Mel, whether in the free (C-Mel-Met) or liposomal (C-Lipo-Mel-Met) forms, reduced inflammation as well as proliferation of bile ducts; however, results were more prominent in the liposomal form of Mel and Met. Additionaly, serum levels of aspartate aminotransferase (AST) were significantly (p < 0.001) higher in (C-Mel-Met) treated rats compared with (BDL) rats; however, (C-Lipo-Mel-Met) treated rats exhibited significant (p < 0.05) lower AST rates in comparison to (BDL) rats. Moreover, a significant (p < 0.0001) drop in bilirubin levels was detected in (C-Lipo-Mel-Met) treated rats in comparison to (BDL) rats; it is noteworthy mentioning that bilirubin levels in (C-Lipo-Mel-Met) treated rats were insignificant in comparison to sham-control (SC) rats. Furthermore, rats concomitantly administered Met and Mel, exhibited significant downregulation in the expression levels of inflammatory cytokine genes such as TNF-α and IL-1 gene expression, where the downregulation was more prominent in the liposomal from. Our findings demonestrate that the concomitant administration of metformin and melatonin in the liposomal form had more therapeutic effect on liver injury than their free forms through improving histological changes, reducing biochemical markers and favoring oxidant- antioxidant balance.

Metformin HCl-loaded transethosomal gel; development, characterization, and antidiabetic potential evaluation in the diabetes-induced rat model

Herein we designed, optimized, and characterized the Metformin Hydrochloride Transethosomes (MTF-TES) and incorporate them into Chitosan gel to develop Metformin Hydrochloride loaded Transethosomal gel (MTF-TES gel) that provides a sustained release, improved transdermal flux and improved antidiabetic response of MTF. Design Expert® software (Ver. 12, Stat-Ease, USA) was applied for the statistical optimization of MTF-TES. The formulation with Mean Particle Size Distribution (MPSD) of 165.4 ± 2.3 nm, Zeta Potential (ZP) of -21.2 ± 1.9 mV, Polydispersity Index (PDI) of 0.169 ± 0.033, and MTF percent Entrapment Efficiency (%EE) of 89.76 ± 4.12 was considered to be optimized. To check the chemical incompatibility among the MTF and other formulation components, Fourier Transform Infrared (FTIR) spectroscopy was performed and demonstrated with no chemical interaction. Surface morphology, uniformity, and segregation were evaluated through Transmission Electron Microscopy (TEM). It was revealed that the nanoparticles were spherical and round in form with intact borders. The fabricated MTF-TES has shown sustained release followed by a more pronounced effect in MTF-TES gel as compared to the plain MTF solution (MTFS) at a pH of 7.4. The MTF-TES has shown enhanced permeation followed by MTF-TES gel as compared to the MTFS at a pH of 7.4. In vivo antidiabetic assay was performed and results have shown improved antidiabetic potential of the MTF-TES gel, in contrast to MTF-gel. Conclusively, MTF-TES is a promising anti-diabetic candidate for transdermal drug delivery that can provide sustained MTF release and enhanced antidiabetic effect.

Bael (Aegle marmelos L. Correa) fruit extracts encapsulated alginate nanoparticles as a potential dietary supplement with improved bioactivities

Nanoencapsulated bael fruit (Aegle marmelos L. Correa (Family: Rutaceae)) extracts reveal novel prospects in the development of dietary supplements with improved biological activities in the field of the food industry. The main objectives of this study were to prepare and characterize aqueous, ethanol, 50% ethanol, and 50% acetone extracts of bael fruit encapsulated alginate nanoparticles and investigate the effect of encapsulation on in vitro release of polyphenols, antidiabetic, antioxidant, and anti-inflammatory activities, and their stability. Bael fruit extracts encapsulated alginate nanoparticles were prepared using the ionic gelation method. Characterization, in vitro release profiles of polyphenols, determination of antidiabetic, anti-inflammatory, antioxidant activity, and accelerated stability were conducted. The results of the characterization confirmed the successful encapsulation of extracts of bael fruit in the alginate matrix. The aqueous extract of bael fruit encapsulated alginate nanoparticles exhibited a more controlled slow-release profile, accounting for 21.82% ± 1.17% and 48.14% ± 0.52% of polyphenols at solutions of pH 1.2 and pH 6.8, respectively. In general, the results of the bioactivity assessment suggested that nanoencapsulation could facilitate the enhancement of its antidiabetic, antioxidant, and anti-inflammatory properties. The results of thermogravimetric analysis and thin layer chromatography fingerprint showed the stability of aqueous bael fruit extract encapsulated alginate nanoparticles at 27 and 4°C over a month. In summary, the results of this study revealed the potency of nanoencapsulated aqueous extract of bael fruit to develop a dietary supplement with improved antidiabetic, antioxidant, and anti-inflammatory activities. PRACTICAL APPLICATION: The encapsulation of bael fruit extracts into a nanocarrier enhances bioactivities and promotes the controlled release of bioactive compounds. This could be useful in the future food industry, based on scientifically proven data, and inspire the market by means of the development of dietary supplements. Overall, the results would facilitate the formulation of novel commercially elegant nanoencapsulated dietary supplements with improved potential to manage a healthy life.

Translation of nanotechnology-based implants for orthopedic applications: current barriers and future perspective

The objective of bioimplant engineering is to develop biologically compatible materials for restoring, preserving, or altering damaged tissues and/or organ functions. The variety of substances used for orthopedic implant applications has been substantially influenced by modern material technology. Therefore, nanomaterials can mimic the surface properties of normal tissues, including surface chemistry, topography, energy, and wettability. Moreover, the new characteristics of nanomaterials promote their application in sustaining the progression of many tissues. The current review establishes a basis for nanotechnology-driven biomaterials by demonstrating the fundamental design problems that influence the success or failure of an orthopedic graft, cell adhesion, proliferation, antimicrobial/antibacterial activity, and differentiation. In this context, extensive research has been conducted on the nano-functionalization of biomaterial surfaces to enhance cell adhesion, differentiation, propagation, and implant population with potent antimicrobial activity. The possible nanomaterials applications (in terms of a functional nanocoating or a nanostructured surface) may resolve a variety of issues (such as bacterial adhesion and corrosion) associated with conventional metallic or non-metallic grafts, primarily for optimizing implant procedures. Future developments in orthopedic biomaterials, such as smart biomaterials, porous structures, and 3D implants, show promise for achieving the necessary characteristics and shape of a stimuli-responsive implant. Ultimately, the major barriers to the commercialization of nanotechnology-derived biomaterials are addressed to help overcome the limitations of current orthopedic biomaterials in terms of critical fundamental factors including cost of therapy, quality, pain relief, and implant life. Despite the recent success of nanotechnology, there are significant hurdles that must be overcome before nanomedicine may be applied to orthopedics. The objective of this review was to provide a thorough examination of recent advancements, their commercialization prospects, as well as the challenges and potential perspectives associated with them. This review aims to assist healthcare providers and researchers in extracting relevant data to develop translational research within the field. In addition, it will assist the readers in comprehending the scope and gaps of nanomedicine's applicability in the orthopedics field.

Hyaluronic acid-graphene oxide quantum dots nanoconjugate as dual purpose drug delivery and therapeutic agent in meta-inflammation

Type 2 diabetes mellitus (T2DM) predominantly considered a metabolic disease is now being considered an inflammatory disease as well due to the involvement of meta-inflammation. Obesity-induced adipose tissue inflammation (ATI) is one of the earliest phenomena in the case of meta-inflammation, leading to the advent of insulin resistance (IR) and T2DM. The key events of ATI are orchestrated by macrophages, which aggravate the inflammatory state in the tissue upon activation, ultimately leading to systemic chronic low-grade inflammation and Non-Alcoholic Steatohepatitis (NASH) through the involvement of proinflammatory cytokines. The CD44 receptor on macrophages is overexpressed in ATI, NASH, and IR. Therefore, we developed a CD44 targeted Hyaluronic Acid functionalized Graphene Oxide Quantum Dots (GOQD-HA) nanocomposite for tissue-specific delivery of metformin. Metformin-loaded GOQD-HA (GOQD-HA-Met) successfully downregulated the expression of proinflammatory cytokines and restored antioxidant status at lower doses than free metformin in both palmitic acid-induced RAW264.7 cells and diet induced obese mice. Our study revealed that the GOQD-HA nanocarrier enhanced the efficacy of Metformin primarily by acting as a therapeutic agent apart from being a drug delivery platform. The therapeutic properties of GOQD-HA stem from both HA and GOQD having anti-inflammatory and antioxidant properties respectively. This study unravels the function of GOQD-HA as a targeted drug delivery option for metformin in meta-inflammation where the nanocarrier itself acts as a therapeutic agent.

Recent developments in natural biopolymer based drug delivery systems

Targeted delivery of drug molecules to diseased sites is a great challenge in pharmaceutical and biomedical sciences. Fabrication of drug delivery systems (DDS) to target and/or diagnose sick cells is an effective means to achieve good therapeutic results along with a minimal toxicological impact on healthy cells. Biopolymers are becoming an important class of materials owing to their biodegradability, good compatibility, non-toxicity, non-immunogenicity, and long blood circulation time and high drug loading ratio for both macros as well as micro-sized drug molecules. This review summarizes the recent trends in biopolymer-based DDS, forecasting their broad future clinical applications. Cellulose chitosan, starch, silk fibroins, collagen, albumin, gelatin, alginate, agar, proteins and peptides have shown potential applications in DDS. A range of synthetic techniques have been reported to design the DDS and are discussed in the current study which is being successfully employed in ocular, dental, transdermal and intranasal delivery systems. Different formulations of DDS are also overviewed in this review article along with synthesis techniques employed for designing the DDS. The possibility of these biopolymer applications points to a new route for creating unique DDS with enhanced therapeutic qualities for scaling up creative formulations up to the clinical level.

Counteracting Immunosenescence-Which Therapeutic Strategies Are Promising?

Aging attenuates the overall responsiveness of the immune system to eradicate pathogens. The increased production of pro-inflammatory cytokines by innate immune cells under basal conditions, termed inflammaging, contributes to impaired innate immune responsiveness towards pathogen-mediated stimulation and limits antigen-presenting activity. Adaptive immune responses are attenuated as well due to lowered numbers of naïve lymphocytes and their impaired responsiveness towards antigen-specific stimulation. Additionally, the numbers of immunoregulatory cell types, comprising regulatory T cells and myeloid-derived suppressor cells, that inhibit the activity of innate and adaptive immune cells are elevated. This review aims to summarize our knowledge on the cellular and molecular causes of immunosenescence while also taking into account senescence effects that constitute immune evasion mechanisms in the case of chronic viral infections and cancer. For tumor therapy numerous nanoformulated drugs have been developed to overcome poor solubility of compounds and to enable cell-directed delivery in order to restore immune functions, e.g., by addressing dysregulated signaling pathways. Further, nanovaccines which efficiently address antigen-presenting cells to mount sustained anti-tumor immune responses have been clinically evaluated. Further, senolytics that selectively deplete senescent cells are being tested in a number of clinical trials. Here we discuss the potential use of such drugs to improve anti-aging therapy.

Metformin and curcumin co-encapsulated chitosan/alginate nanoparticles as effective oral carriers against pain-like behaviors in mice

Nanotechnology plays an integral role in multimodal analgesia. In this study, we co-encapsulated metformin (Met) and curcumin (Cur) into chitosan/alginate (CTS/ALG) nanoparticles (NPs) at their synergistic drug ratio by applying response surface methodology. The optimized Met-Cur-CTS/ALG-NPs were achieved with Pluronic® F-127 2.33% (w/v), Met 5.91 mg, and CTS:ALG mass ratio 0.05:1. The prepared Met-Cur-CTS/ALG-NPs had 243 nm particle size, -21.6 mV zeta potential, 32.6 and 44.2% Met and Cur encapsulations, 19.6 and 6.8% Met and Cur loading, respectively, and 2.9:1 Met:Cur mass ratio. Met-Cur-CTS/ALG-NPs displayed stability under simulated gastrointestinal (GI) fluid conditions and during storage. In vitro release study of Met-Cur-CTS/ALG-NPs in simulated GI fluids showed sustained release, with Met exhibiting Fickian diffusion and Cur demonstrating non-Fickian diffusion following the Korsmeyer-Peppas model. Met-Cur-CTS/ALG-NPs exhibited increased mucoadhesion and improved cellular uptake in Caco-2 cells. Additionally, Met-Cur-CTS/ALG-NPs exhibited better anti-inflammatory effects in lipopolysaccharide-stimulated RAW 264.7 macrophage and BV-2 microglial cells than the equivalent amount of the Met-Cur physical mixture, indicating a greater ability to modulate peripheral and central immune mechanisms of pain. In the mouse formalin-induced pain model, Met-Cur-CTS/ALG-NPs administered orally exhibited better attenuation of pain-like behaviors and proinflammatory cytokine release compared to the Met-Cur physical mixture. Furthermore, Met-Cur-CTS/ALG-NPs did not induce significant side effects in mice at therapeutic doses. Altogether, the present study establishes a CTS/ALG nano-delivery system for Met-Cur combination against pain with improved efficacy and safety.

Polymer-Based Nanostructures for Pancreatic Beta-Cell Imaging and Non-Invasive Treatment of Diabetes

Diabetes poses major economic, social, and public health challenges in all countries worldwide. Besides cardiovascular disease and microangiopathy, diabetes is a leading cause of foot ulcers and lower limb amputations. With the continued rise of diabetes prevalence, it is expected that the future burden of diabetes complications, early mortality, and disabilities will increase. The diabetes epidemic is partly caused by the current lack of clinical imaging diagnostic tools, the timely monitoring of insulin secretion and insulin-expressing cell mass (beta (β)-cells), and the lack of patients' adherence to treatment, because some drugs are not tolerated or invasively administrated. In addition to this, there is a lack of efficient topical treatment capable of stopping the progression of disabilities, in particular for treating foot ulcers. In this context, polymer-based nanostructures garnered significant interest due to their tunable physicochemical characteristics, rich diversity, and biocompatibility. This review article emphasizes the last advances and discusses the prospects in the use of polymeric materials as nanocarriers for β-cell imaging and non-invasive drug delivery of insulin and antidiabetic drugs in the management of blood glucose and foot ulcers.

Preparation and optimization of tetraethyl orthosilicate cross-linked chitosan-guar gum-poly(vinyl alcohol) composites reinforced with montmorillonite for sustained release of sitagliptin

Development of efficient drug carriers has become an integral part of advanced drug delivery systems. This work aims at developing composites by adopting an economically viable method for sustained release of anti-diabetic drug sitagliptin - a potent and selective dipeptidyl peptidase-IV inhibitor. To combat the harsh environment of gastrointestinal tract, the composite (F13) was prepared using biodegradable polymers namely chitosan, guar gum and poly(vinyl alcohol) with montmorillonite clay as nano-filler and tetraethyl orthosilicate as the cross linker. The composites were characterized using FT-IR, XRD, DSC and SEM techniques. Physical properties such as thickness, swelling capacity, folding endurance and water solubility were studied. In vitro analysis of composites (F17, F19 and F20) in simulated gastric medium showed <14 % cumulative release in 2 h while a sustained release was observed in simulated intestinal medium. Drug release kinetics was investigated using five mathematical models namely zero order, first order, Higuchi, Hixon-Crowell and Korsemeyer-Peppas wherein the latter was the best fit model (R², 0.969). Antimicrobial studies of drug free composite (F13) revealed good activity against bacteria as well as fungi. The results implied that the composites were pH sensitive and could serve as a potential choice for sustained release of drugs.

Novel therapeutic mechanism of action of metformin and its nanoformulation in Alzheimer's disease and role of AKT/ERK/GSK pathway

INTRODUCTION

Brain Insulin-resistance plays a critical role in pathogenesis of Alzheimer's disease (AD). Current study explored the therapeutic mechanism of metformin (insulin sensitizer) and its solid-lipid nanoformulation (SLN) in rat-model of AD. In our study, SLN was prepared using microemulsion method. AD was induced with ICV-Aβ whereas the control-group (sham) received ICV-NS. Treatment arms included, disease-control (no treatment), Metformin (50 mg/kg, 100 mg/kg and 150 mg/kg), SLN-metformin 50 mg/kg and memantine 1.8 mg/kg (positive-control). Animals were tested for cognitive performance (EPM, MWM) after 21 days of therapy and sacrificed. Aβ (1-42), hyperphosphorylated tau, pAKTser473, GSK-3β, p-ERK (ELISA), metformin level(HPLC), neuronal injury score(H&E), Bcl2 and Bax(IHC) was evaluated in isolated brain. In our study, metformin-SLN were of spherical shape (size<200 nm) with 94.08% entrapment efficiency. Metformin was detectable in brain. Compared to sham, the disease-control group showed significantly higher (p ≤ 0.05) memory impairment(MWM and EPM), hyperphosphorylated tau, Aβ(1-42), neuronal-injury, Bax and lower Bcl-2 expression. Treatment with metformin and nanoformulation significantly reverse these parameters. AKT-ERK-GSK3β-Hyperphosphorylated tau pathway was found to be involved in the protective efficacy of metformin. To conclude, both metformin and its SLN were found to be effective as therapeutic agents in AD which act through the AKT-ERK-GSK3β-Hyperphosphorylated tau pathway. We need population based studies to confirm the same.

Metformin Hydrochloride Mucosal Nanoparticles-Based Enteric Capsule for Prolonged Intestinal Residence Time, Improved Bioavailability, and Hypoglycemic Effect

Metformin hydrochloride enteric-coated capsule (MH-EC) is a commonly used clinical drug for the treatment of type 2 diabetes. In this study, we described a metformin hydrochloride mucosal nanoparticles enteric-coated capsule (MH-MNPs-EC) based on metformin hydrochloride chitosan mucosal nanoparticles (MH-CS MNPs) and its preparation method to improve the bioavailability and hypoglycemic effect duration of MH-EC. In intestinal adhesion study, the residue rates of free drugs and mucosal nanoparticles were 10.52% and 67.27%, respectively after cleaned with PBS buffer. MH-CS MNPs could significantly improve the efficacy of MH and promote the rehabilitation of diabetes rats. In vitro release test of MH-MNPs-EC showed continuous release over 12 h, while commercial MH-EC released completely within about 1 h in intestinal environment (pH 6.8). Pharmacokinetic study was performed in beagle dogs compared to the commercial MH-EC. The durations of blood MH concentration above 2 μg/mL were 9 h for MH-MNPs-EC versus 2 h for commercial MH-EC. The relative bioavailability of MH-MNPs-EC was determined as 185.28%, compared with commercial MH-EC. In conclusion, MH-CS MNPs have good intestinal adhesion and can significantly prolong the residence time of MH in the intestine. MH-MNPs-EC has better treatment effect compared with MH-EC, and it is expected to be a potential drug product for the treatment of diabetes because of its desired characteristics.

Alginates Combined with Natural Polymers as Valuable Drug Delivery Platforms

Alginates (ALG) have been used in biomedical and pharmaceutical technologies for decades. ALG are natural polymers occurring in brown algae and feature multiple advantages, including biocompatibility, low toxicity and mucoadhesiveness. Moreover, ALG demonstrate biological activities per se, including anti-hyperlipidemic, antimicrobial, anti-reflux, immunomodulatory or anti-inflammatory activities. ALG are characterized by gelling ability, one of the most frequently utilized properties in the drug form design. ALG have numerous applications in pharmaceutical technology that include micro- and nanoparticles, tablets, mucoadhesive dosage forms, wound dressings and films. However, there are some shortcomings, which impede the development of modified-release dosage forms or formulations with adequate mechanical strength based on pure ALG. Other natural polymers combined with ALG create great potential as drug carriers, improving limitations of ALG matrices. Therefore, in this paper, ALG blends with pectins, chitosan, gelatin, and carrageenans were critically reviewed.

Repositioning of drugs for Parkinson's disease and pharmaceutical nanotechnology tools for their optimization

Parkinson's disease (PD) significantly affects patients' quality of life and represents a high economic burden for health systems. Given the lack of safe and effective treatments for PD, drug repositioning seeks to offer new medication alternatives, reducing research time and costs compared to the traditional drug development strategy. This review aimed to collect evidence of drugs proposed as candidates to be reused in PD and identify those with the potential to be reformulated into nanocarriers to optimize future repositioning trials. We conducted a detailed search in PubMed, Web of Science, and Scopus from January 2015 at the end of 2021, with the descriptors "Parkinson's disease" and "drug repositioning" or "drug repurposing". We identified 28 drugs as potential candidates, and six of them were found in repositioning clinical trials for PD. However, a limitation of many of these drugs to achieve therapeutic success is their inability to cross the blood-brain barrier (BBB), as is the case with nilotinib, which has shown promising outcomes in clinical trials. We suggest reformulating these drugs in biodegradable nanoparticles (NPs) based on lipids and polymers to perform future trials. As a complementary strategy, we propose functionalizing the NPs surface by adding materials to the surface layer. Among other advantages, functionalization can promote efficient crossing through the BBB and improve the affinity of NPs towards certain brain regions. The main parameters to consider for the design of NPs targeting the central nervous system are highlighted, such as size, PDI, morphology, drug load, and Z potential. Finally, current advances in the use of NPs for Parkinson's disease are cited.

Therapeutic Applications of Nanomedicine in Metabolic Diseases by Targeting the Endothelium

The endothelial cells not only constitute the barrier between the blood and interstitial space, but also actively regulate vascular tone, blood flow, and the function of adjacent parenchymal cells. The close anatomical relationship between endothelial cells and highly vascularized metabolic organs suggests that the crosstalk between these units is vital for systemic metabolic homeostasis. Here, we review recent studies about the pivotal role of endothelial cells in metabolic diseases. Specifically, we discuss how the dysfunction of endothelial cells directly contributes to the development of insulin resistance (IR), type 2 diabetes mellitus (T2DM), atherosclerosis, and non-alcoholic fatty liver disease (NAFLD) via communication with parenchymal cells. Furthermore, although many biological macromolecules have been shown to ameliorate the progression of metabolic diseases by improving endothelial function, the low solubility, poor bioavailability, or lack of specificity of these molecules limit their clinical application. Given the advantages in drug delivery of nanomedicine, we focus on summarizing the reports that improving endothelial dysfunction through nanomedicine-based therapies provides an opportunity for preventing metabolic diseases.

Reactive Oxygen Species Scavenging Nanomedicine for the Treatment of Ischemic Heart Disease

Ischemic heart disease (IHD) is the leading cause of disability and mortality worldwide. Reactive oxygen species (ROS) have been shown to play key roles in the progression of diabetes, hypertension, and hypercholesterolemia, which are independent risk factors that lead to atherosclerosis and the development of IHD. Engineered biomaterial-based nanomedicines are under extensive investigation and exploration, serving as smart and multifunctional nanocarriers for synergistic therapeutic effect. Capitalizing on cell/molecule-targeting drug delivery, nanomedicines present enhanced specificity and safety with favorable pharmacokinetics and pharmacodynamics. Herein, the roles of ROS in both IHD and its risk factors are discussed, highlighting cardiovascular medications that have antioxidant properties, and summarizing the advantages, properties, and recent achievements of nanomedicines that have ROS scavenging capacity for the treatment of diabetes, hypertension, hypercholesterolemia, atherosclerosis, ischemia/reperfusion, and myocardial infarction. Finally, the current challenges of nanomedicines for ROS-scavenging treatment of IHD and possible future directions are discussed from a clinical perspective.

Natural Polysaccharide-Based Nanodrug Delivery Systems for Treatment of Diabetes

In recent years, natural polysaccharides have been considered as the ideal candidates for novel drug delivery systems because of their good biocompatibility, biodegradation, low immunogenicity, renewable source and easy modification. These natural polymers are widely used in the designing of nanocarriers, which possess wide applications in therapeutics, diagnostics, delivery and protection of bioactive compounds or drugs. A great deal of studies could be focused on developing polysaccharide nanoparticles and promoting their application in various fields, especially in biomedicine. In this review, a variety of polysaccharide-based nanocarriers were introduced, including nanoliposomes, nanoparticles, nanomicelles, nanoemulsions and nanohydrogels, focusing on the latest research progress of these nanocarriers in the treatment of diabetes and the possible strategies for further study of polysaccharide nanocarriers.

Metformin-Loaded Polymer-Based Microbubbles/Nanoparticles Generated for the Treatment of Type 2 Diabetes Mellitus

Type 2 diabetes mellitus (T2DM) is a chronic metabolic disease that is increasingly common all over the world with a high risk of progressive hyperglycemia and high microvascular and macrovascular complications. The currently used drugs in the treatment of T2DM have insufficient glucose control and can carry detrimental side effects. Several drug delivery systems have been investigated to decrease the side effects and frequency of dosage, and also to increase the effect of oral antidiabetic drugs. In recent years, the use of microbubbles in biomedical applications has greatly increased, and research into microactive carrier bubbles continues to generate more and more clinical interest. In this study, various monodisperse polymer nanoparticles at different concentrations were produced by bursting microbubbles generated using a T-junction microfluidic device. Morphological analysis by scanning electron microscopy, molecular interactions between the components by FTIR, drug release by UV spectroscopy, and physical analysis such as surface tension and viscosity measurement were carried out for the particles generated and solutions used. The microbubbles and nanoparticles had a smooth outer surface. When the microbubbles/nanoparticles were compared, it was observed that they were optimized with 0.3 wt % poly(vinyl alcohol) (PVA) solution, 40 kPa pressure, and a 110 μL/min flow rate, thus the diameters of the bubbles and particles were 100 ± 10 μm and 70 ± 5 nm, respectively. Metformin was successfully loaded into the nanoparticles in these optimized concentrations and characteristics, and no drug crystals and clusters were seen on the surface. Metformin was released in a controlled manner at pH 1.2 for 60 min and at pH 7.4 for 240 min. The process and structures generated offer great potential for the treatment of T2DM.

Potential enhancement of metformin hydrochloride in solidified reverse micellar solution-based PEGylated lipid nanoparticles targeting therapeutic efficacy in diabetes treatment

Metformin hydrochloride (MH) is a widely used oral biguanide antihyperglycemic (antidiabetic) drug with poor bioavailability which necessitates the development of novel drug delivery systems such as PEGylated solid lipid nanoparticles for improving its therapeutic activity. The aim of this study was to formulate, characterize and evaluate in vitro and in vivo pharmacodynamic properties of metformin-loaded PEGylated solid lipid nanoparticles (PEG-SLN) for improved delivery of MH. The lipid matrices (non-PEGylated lipid matrix and PEGylated lipid matrices) used in the formulation of both non-PEGylated (J0) and PEGylated SLNs (J10, J20, J40) were prepared by fusion using beeswax and Phospholipon ® 90H at 7:3 ratio with or without polyethylene glycol (PEG) 4000 (0, 10, 20 and 40% w/w), respectively. Representative lipid matrices (LM and PEG-LM) were loaded with MH by fusion and then characterized by differential scanning calorimetry (DSC) and Fourier transform infrared (FT-IR) spectroscopy. The PEG-SLNs were prepared by high shear hot homogenization using the lipid matrices (5% w/w), drug (MH) (1.0% w/w), sorbitol (4% w/w) (cryoprotectant), Tween ® 80 (2% w/w) (surfactant) and distilled water (q.s to 100% w/w) (vehicle). The non-PEGylated and PEGylated SLNs (J0, J10, J20, J40)) were characterized with respect to encapsulation efficiency (EE%), loading capacity (LC), morphology by scanning electron microscopy (SEM), mean particle size (Zav) and polydispersity indices (PDI) by photon correlation spectroscopy (PCS), compatibility by FT-IR spectroscopy and in vitro drug release in biorelevant medium. Thereafter, in vivo antidiabetic study was carried out in alloxanized rats' model and compared with controls (pure sample of MH and commercial MH- Glucophage®)). Solid state characterizations indicated the amorphous nature of MH in the drug loaded-lipid matrices. The PEG-SLNs were mostly smooth and spherical nanoformulations with Zav and PDI of 350.00 nm and 0.54, respectively, for non-PEGylated SLNs, and in the range of 386.80-783.10 nm and 0.592 to 0.752, respectively, for PEGylated SLNs. The highest EE% and LC were noted in batch J20 and were 99.28% and 16.57, respectively. There was no strong chemical interaction between the drug and excipients used in the preparation of the formulations. The PEGylated SLN (batch J40) exhibited the highest percentage drug released (60%) at 8 h. The PEGylated SLNs showed greater hyperglycemic control than the marketed formulation (Glucophage ®) after 24 h. This study has shown that metformin-loaded PEGylated solid lipid nanoparticles could be employed as a potential approach to improve the delivery of MH in oral diabetic management, thus encouraging further development of the formulations.

Polysaccharide-Drug Conjugates: A Tool for Enhanced Cancer Therapy

Cancer is one of the most widespread deadly diseases, following cardiovascular disease, worldwide. Chemotherapy is widely used in combination with surgery, hormone and radiation therapy to treat various cancers. However, chemotherapeutic drugs can cause severe side effects due to non-specific targeting, poor bioavailability, low therapeutic indices, and high dose requirements. Several drug carriers successfully overcome these issues and deliver drugs to the desired sites, reducing the side effects. Among various drug delivery systems, polysaccharide-based carriers that target only the cancer cells have been developed to overcome the toxicity of chemotherapeutics. Polysaccharides are non-toxic, biodegradable, hydrophilic biopolymers that can be easily modified chemically to improve the bioavailability and stability for delivering therapeutics into cancer tissues. Different polysaccharides, such as chitosan, alginates, cyclodextrin, pullulan, hyaluronic acid, dextran, guar gum, pectin, and cellulose, have been used in anti-cancer drug delivery systems. This review highlights the recent progress made in polysaccharides-based drug carriers in anti-cancer therapy.

Sodium Alginate as a Pharmaceutical Excipient: Novel Applications of a Well-known Polymer

Alginates are naturally occurring polymers revealing low toxicity, good biocompatibility and biodegradability, excellent gelling and thickening properties, as well as low production cost and good availability. One of the most important features typical for alginates is the ability to undergo ionotropic gelation which is gel formation process occurring upon the contact with cations. Because of their advantageous properties, alginates have been extensively utilized in food and pharmaceutical industries. In this review the current knowledge regarding the most recent studies involving both popularly applied dosage forms, like tablets or hydrogels, and novel advanced drug delivery systems applied in targeted therapies are summarized and discussed. The presented studies indicate that although sodium alginate is a well-established polymer, it is still widely applied as pharmaceutical excipient and the presented research studies indicate that there are still research areas that can be explored and provide innovation in drug delivery systems.

In vitro-in vivo availability of metformin hydrochloride-PLGA nanoparticles in diabetic rats in a periodontal disease experimental model

CONTEXT

Metformin is an important oral anti-hyperglycemic used in diabetes. Polylactic-co-glycolic acid (PLGA) has been widely used due to its reliability in controlling the release of drugs.

OBJECTIVE

This study evaluates the in vitro-in vivo availability of metformin hydrochloride-loaded polylactic-co-glycolic acid.

MATERIAL AND METHODS

In vitro metformin release (Met-free or PLGA + Met-12.5 mg/mL per 360 min) was evaluated using static Franz vertical diffusion cells. The in vivo study was performed with two control groups (validation bioanalytical method) and two experimental groups of diabetic male Wistar rats treated with PLGA + Met 10 mg/kg or Met 100 mg/kg by oral gavage. Diabetes was induced by streptozotocin (40 mg/kg) through the penile vein. Blood samples were collected 0.5, 1, 4, 7, 10, 12, 18, 24, 36, 48 and 72 h and analysed by high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS).

RESULTS

PLGA + Met 10 mg/kg was released in the in vitro assay suggesting a parabolic diffusion kinetic model (K -0.0619^-0.5h) with a 100% release profile in 10 h by controlled diffusion. The in vivo assay showed the apparent volume of distribution Vz/F (PLGA + Met 10 mg/kg, 40971.8 mL/kg vs. Met 100 mg/kg, 2174.58 mL/kg) and mean residence time MRTinf (PLGA + Met 10 mg/kg, 37.66 h vs. Met 100 mg/kg, 3.34 h).

DISCUSSION AND CONCLUSIONS

The formulation modifies pharmacokinetics parameters such as apparent distribution volume and mean residence time. The PLGA + Met 10 mg/kg had a slower elimination rate compared to Met 100 mg/kg in diabetic rats in a periodontal disease experimental model.

Potassium bromate-induced nephrotoxicity and potential curative role of metformin loaded on gold nanoparticles

Potassium bromate (KBrO3) is classified by the International Agency for Research on Cancer as a carcinogenic compound, where it causes renal tumors. The present study investigated the potential curative effect of metformin loaded on gold nanoparticles (MET AuNPs) in attenuating KBrO3-induced nephrotoxicity. Rats were divided into eight groups (control, MET, AuNPs, MET AuNPs, KBrO3, KBrO3/MET, KBrO3/AuNPS, and KBrO3/MET AuNPs). KBrO3 administration resulted in a significant elevation in serum alanine aminotransferase (ALT), aspartate aminotransferase (AST), alkaline phosphatase (ALP), total protein (TP), albumin (Alb), total bilirubin (TB), direct bilirubin (DB), total cholesterol (TC), triglycerides (TG), high-density lipoprotein cholesterol (HDL-C), low-density lipoprotein cholesterol (LDL-C), creatinine, urea, uric acid. Also, KBrO3 significantly increased renal malondialdehyde (MDA), protein carbonyl (PC), and nitric oxide (NO) levels and reduced the activities of antioxidant molecules superoxide dismutase (SOD), catalase (CAT), glutathione-S-transferase (GST), and Reduced glutathione (GSH). It also caused damaged DNA spots in comet assay and increased inflammatory IL-6 and apoptotic markers (caspase 3, Bax) while antiapoptotic Bcl-2 was significantly reduced. MET, AuNPS, MET AuNPS reduced the extent of renal damage induced by KBrO3 as indicated by decreased (AST, ALT, ALP, Alb, TP, TB, DB, creatinine, urea, uric, Lipid profile). MET, AuNPS, MET AuNPS showed a good curative effect against KBrO3-induced nephrotoxicity and MET AuNPS group showed better results compared with monotherapy.

The impact of chemical engineering and technological advances on managing diabetes: present and future concepts

Monitoring blood glucose levels for diabetic patients is critical to achieve tight glycaemic control. As none of the current antidiabetic treatments restore lost functional β-cell mass in diabetic patients, insulin injections and the use of insulin pumps are most widely used in the management of glycaemia. The use of advanced and intelligent chemical engineering, together with the incorporation of micro- and nanotechnological-based processes have lately revolutionized diabetic management. The start of this concept goes back to 1974 with the description of an electrode that repeatedly measures the level of blood glucose and triggers insulin release from an infusion pump to enter the blood stream from a small reservoir upon need. Next to the insulin pumps, other drug delivery routes, including nasal, transdermal and buccal, are currently investigated. These processes necessitate competences from chemists, engineers-alike and innovative views of pharmacologists and diabetologists. Engineered micro and nanostructures hold a unique potential when it comes to drug delivery applications required for the treatment of diabetic patients. As the technical aspects of chemistry, biology and informatics on medicine are expanding fast, time has come to step back and to evaluate the impact of technology-driven chemistry on diabetics and how the bridges from research laboratories to market products are established. In this review, the large variety of therapeutic approaches proposed in the last five years for diabetic patients are discussed in an applied context. A survey of the state of the art of closed-loop insulin delivery strategies in response to blood glucose level fluctuation is provided together with insights into the emerging key technologies for diagnosis and drug development. Chemical engineering strategies centered on preserving and regenerating functional pancreatic β-cell mass are evoked in addition as they represent a permanent solution for diabetic patients.

Gastroretentive Metformin loaded Nanoparticles for the effective management of Type-2 Diabetes Mellitus

INTRODUCTION

Metformin, an anti-diabetic drug, has low bioavailability and a short biological half-life. Thus, bioavailability enhancement and prolonged release of the drug are highly desirable. In this regard, we aimed to developed gastroretentive nanoparticles made of jackfruit seed starch (JFSS) loaded with metformin.

METHODS

The developed nanoparticles were optimized for various process variables and were further characterized. Nanoparticles exhibited good results with respect to particle size (244.3 to 612.4 nm), particle size distribution, shape, and drug entrapment efficiency (75.8 to 89.2 %) with sustained drug release for 24 h and a high buoyancy (89% for F7, formulation made of the highest concentration of Jackfruit seed starch prepared at 1000 RPM stirring speed).

RESULTS

The hypoglycemic potential of these nanoparticles was tested in the nicotinamide streptozocin induced diabetic model; there was a significant reduction in blood glucose level (50 % reduction from 4 - 8 h, p < 0.01) for a prolonged period of time (up to 24 h) in comparison to diabetic control and plain metformin solution.

CONCLUSION

The outcome of the study suggested that the developed formulations are suitable for gastro-retentive delivery of Metformin in a controlled manner appropriate for a single administration per day.

Microfluidic-based synthesized carboxymethyl chitosan nanoparticles containing metformin for diabetes therapy: In vitro and in vivo assessments

This work was aimed to synthesize novel crosslinked carboxymethyl chitosan nanoparticles (CMCS NPs) containing metformin hydrochloride (MET) using microfluidics (MF) and evaluate their performance for diabetes therapy. The field emission-scanning electron microscopy (FE-SEM) images and dynamic light scattering (DLS) results showed that the NPs average size was 77 ± 19 nm with a narrow size distribution. They exhibited a high encapsulation efficiency (∼90 %) and the controlled drug release while crosslinking using CaCl₂. Eventually, the in vivo assessments dedicated an increased body weight up to 7.94 % and a decreased blood glucose level amount of 43.58 % for MF MET-loaded CMCS NPs with respect to the free drug in diabetic rats. Also, the results of histopathological studies revealed the size of the pancreatic islets to be 2.32 μm² and β cells intensity to be 64 cells per islet for the diabetic rats after treating with the MF-based sample. These data were close to those obtained for the healthy rats.

Quantum Dot Nanomedicine Formulations Dramatically Improve Pharmacological Properties and Alter Uptake Pathways of Metformin and Nicotinamide Mononucleotide in Aging Mice

Orally administered Ag₂S quantum dots (QDs) rapidly cross the small intestine and are taken up by the liver. Metformin and nicotinamide mononucleotide (NMN) target metabolic and aging processes within the liver. This study examined the pharmacology and toxicology of QD-based nanomedicines as carriers of metformin and NMN in young and old mice, determining if their therapeutic potency and reduced effects associated with aging could be improved. Pharmacokinetic studies demonstrated that QD-conjugated metformin and NMN have greater bioavailability, with selective accumulation in the liver following oral administration compared to unconjugated formulations. Pharmacodynamic data showed that the QD-conjugated medicines had increased physiological, metabolic, and cellular potency compared to unconjugated formulations (25× metformin; 100× NMN) and highlighted a shift in the peak induction of, and greater metabolic response to, glucose tolerance testing. Two weeks of treatment with low-dose QD-NMN (0.8 mg/kg/day) improved glucose tolerance tests in young (3 months) mice, whereas old (18 and 24 months) mice demonstrated improved fasting and fed insulin levels and insulin resistance. High-dose unconjugated NMN (80 mg/kg/day) demonstrated improvements in young mice but not in old mice. After 100 days of QD (320 μg/kg/day) treatment, there was no evidence of cellular necrosis, fibrosis, inflammation, or accumulation. Ag₂S QD nanomedicines improved the pharmacokinetic and pharmacodynamic properties of metformin and NMN by increasing their therapeutic potency, bypassing classical cellular uptake pathways, and demonstrated efficacy when drug alone was ineffective in aging mice.

In Vivo Insulin Peptide Autoantigen Delivery by Mannosylated Sodium Alginate Nanoparticles Delayed but Could Not Prevent the Onset of Type 1 Diabetes in Nonobese Diabetic Mice

Type 1 diabetes (T1D) is an autoimmune subtype of diabetes, mainly caused by the immune attack of self-insulin-producing cells. Immune modulation that delays the onset of T1D is able to reduce diabetic complications and mortality. We have previously reported that mannosylated sodium alginate nanoparticles (MAN-ALG) exhibited excellent dendritic cell targeting and in vivo antigen delivery efficacy. To investigate the role of MAN-ALG in an autoimmune context, we loaded the MAN-ALG with Ins2_9-23, a T1D autoantigen [MAN-ALG(PEP)], for T1D immune tolerance induction in nonobese diabetic (NOD) mice. We observed the delayed onset of T1D occurrence and some degree of blood glucose reduction accompanied by a larger islet area, attributable to augmented T-regulatory cell proportion in mice treated with MAN-ALG(PEP). However, MAN-ALG was also found to elicit lysosomal escape and cross-presentation of Ins2_9-23 in bone marrow-derived dendritic cells, leading to the immune activation of Ins2_9-23-recognizing T cells and destruction of Ins2_9-23-expressing islet cells. This dual impact resulted in delayed but a nonpreventive effect of MAN-ALG(PEP) on the T1D onset in NOD mice. Considering the potent immune stimulatory property of MAN-ALG, cautions should be implemented when using alginate-based biomaterials in an autoimmune context. Moreover, it is also noted that regarding the in vivo outcome of immune therapies, biomaterial-based delivery systems and their detailed role on immune regulation need to be examined.

Drug nanodelivery systems based on natural polysaccharides against different diseases

Drug nanodelivery systems (DNDSs) are fascinated cargos to achieve outstanding therapeutic results of various drugs or natural bioactive compounds owing to their unique structures. The efficiency of several pharmaceutical drugs or natural bioactive ingredients is restricted because of their week bioavailability, poor bioaccessibility and pharmacokinetics after orally pathways. In order to handle such constraints, usage of native/natural polysaccharides (NPLS) in fabrication of DNDSs has gained more popularity in the arena of nanotechnology for controlled drug delivery to enhance safety, biocompatibility, better retention time, bioavailability, lower toxicity and enhanced permeability. The main commonly used NPLS in nanoencapsulation systems include chitosan, pectin, alginates, cellulose, starches, and gums recognized as potential materials for fabrication of cargos. Herein, this review is centered on different polysaccharide-based nanocarriers including nanoemulsions, nanohydrogels, nanoliposomes, nanoparticles and nanofibers, which have already served as encouraging candidates for entrapment of therapeutic drugs as well as for their sustained controlled release. Furthermore, the current article explicitly offers comprehensive details regarding application of NPLS-based nanocarriers encapsulating several drugs intended for the handling of numerous disorders, including diabetes, cancer, HIV, malaria, cardiovascular and respiratory as well as skin diseases.

Advanced polymeric nanotechnology to augment therapeutic delivery and disease diagnosis

Therapeutic and diagnostic payloads are usually associated with properties that compromise their efficacy, such as poor aqueous solubility, short half-life, low bioavailability, nonspecific accumulation and diverse side effects. Nanotechnological solutions have emerged to circumvent some of these drawbacks, augmenting therapeutic and/or diagnostic outcomes. Nanotechnology has benefited from the rise in polymer science research for the development of novel nanosystems for therapeutic and diagnostic purposes. Polymers are a widely used class of biomaterials, with a considerable number of regulatory approvals for application in clinics. In addition to their versatility in production and functionalization, several synthetic and natural polymers demonstrate biocompatible properties that dictate their successful biological performance. This article highlights the physicochemical characteristics of a variety of natural and synthetic biocompatible polymers, as well as their role in the manufacture of nanotechnology-based systems, state-of-art applications in disease treatment and diagnosis, and current challenges in finding a way to clinics.

PolyMet-HA nanocomplexs regulates glucose uptake by inhibiting SHIP2 activity

Metformin, the first-line drug to treat type 2 diabetes, inhibits mitochondrial glycerolphosphate dehydrogenase in the liver to suppress gluconeogenesis. The major adverse effects caused by metformin were lactic acidosis and gastrointestinal discomfort. Therefore, there is need to develop a strategy with excellent permeability and appropriate retention effects.In this study, we synthesized a simple and biocompatible PolyMetformin (denoted as PolyMet) through conjugation of PEI_1.8K with dicyandiamide, and then formed PolyMet-hyaluronic acid (HA) nanocomplexs by electrostatic self-assembly of the polycationic PolyMet and polyanionic hyaluronic acid (HA). Similar to metformin, the PolyMet-HA nanocomplexs could reduce the catalytic activity of the recombinant SHIP2 phosphatase domain in vitro. In SHIP2-overexpressing myotubes, PolyMet-HA nanocomplexes ameliorated glucose uptake by downregulating glucose transporter 4 endocytosis. PolyMet-HA nanocomplexes also could restore Akt signaling and protect the podocyte from apoptosis induced by SHIP2 overexpression. In essence, the PolyMet-HA nanocomplexes act similarly to metformin and increase glucose uptake, and maybe have a potential role in the treatment of type 2 diabetes.