Degradation pattern of a porcine collagen membrane in an in vivo model of guided bone regeneration

Healing patterns of alveolar bone following ridge preservation procedures

OBJECTIVES

Examine the histomorphometric bone composition, following alveolar ridge preservation techniques and unassisted socket healing.

MATERIALS AND METHODS

Forty-two patients (42) requiring a single rooted tooth extraction were randomly allocated into three groups (n = 14 per group): Group 1: Guided Bone Regeneration (GBR) using deproteinised bovine bone mineral (DBBM) and a porcine collagen membrane; Group 2: Socket Seal (SS) technique using DBBM and a porcine collagen matrix; Group 3: Unassisted socket healing (Control). Trephined bone biopsies were harvested following a 4-month healing period. Forty-two samples underwent Back-Scattered Electrons -Scanning Electron Microscopy (BSE-SEM) imaging, with 15 samples examined using Xray Micro-Tomography (XMT) (n = 6 for each GBR/SS and n = 3 Control). Images were analysed to determine the percentage (%) of connective tissue, new bone formation, residual DBBM particles and direct bone to DBBM particle contact (osseointegration).

RESULTS

BSE-SEM analysis demonstrated that new bone formation was higher in the Control (45.89% ± 11.48) compared to both GBR (22.12% ± 12.7/p < .004) and SS (27.62% ± 17.76/p < .005) groups. The connective tissue percentage in GBR (49.72% ± 9), SS (47.81% ± 12.57) and Control (47.81% ± 12.57) groups was similar. GBR (28.17% ± 16.64) and SS (24.37% ± 18.61) groups had similar levels of residual DBBM particles. XMT volumetric analysis indicated a lower level of bone and DBBM particles in all test groups, when matched to the BSE-SEM area measurements. Osseointegration levels (DBBM graft and bone) were recorded at 35.66% (± 9.8) for GBR and 31.18% (± 19.38) for SS.

CONCLUSION

GBR and SS ARP techniques presented with less bone formation when compared to unassisted healing. GBR had more direct contact/osseointegration between the DBBM particles and newly formed bone.

Biocompatible chitin-based Janus hydrogel membranes for periodontal repair

Periodontal defects caused by severe periodontitis are a widespread issue globally. Guided tissue regeneration (GTR) using barrier membranes for alveolar bone repair is a common clinical treatment. However, most commercially available collagen barrier membranes are expensive and lack the antibacterial properties essential for effective bone regeneration. Herein, we report a natural polysaccharide chitin hydrogel barrier membrane with a Janus structure (ChT-PDA-p-HAP), featuring high antibacterial and protein-repelling activity on the outer side and good osteogenesis ability on the inner side. This multifunctional membrane is fabricated though a three-step process: (i) dissolution and regeneration of chitin, (ii) co-deposition with polydopamine (PDA) and poly(sulfobetaine methacrylate) (pSBMA), and (iii) coating with gelatin-hydroxyapatite (gelatin-HAP). In vitro cell experiments demonstrated the membrane's high biocompatibility and significant osteogenic activity. In vivo implantation in rats with periodontal defects revealed that the cemento-enamel junction index of the ChT-PDA-p-HAP membrane (1.165 mm) was superior to that of the commercial Bio-Gide® membrane (1.350 mm). This work presents a method for fabricating a chitin-based Janus barrier membrane, potentially expanding the use of chitin in tissue engineering. STATEMENT OF SIGNIFICANCE: This study introduces a Janus hydrogel membrane based on chitin, tailored for guided tissue regeneration in periodontal defects. By combining antibacterial properties and osteogenic capabilities in a single membrane, the ChT-PDA-p-HAP membrane represents a significant advancement over traditional collagen barriers. Its outer surface, enhanced by Cu2+ and PDA-pSBMA coatings, resists bacterial colonization and protein adhesion effectively, while the inner side, coated with gelatin-HAP, promotes robust bone formation. In vitro experiments demonstrate high biocompatibility and substantial osteogenic differentiation, while in vivo testing in rat models confirms good therapeutic efficacy compared to commercial membranes. This multifunctional approach not only utilizes chitin's abundant natural resource but also integrates simple coating techniques to enhance therapeutic outcomes in periodontal tissue engineering, offering promising avenues for broader biomedical applications.

Amino Acid-Based Poly(ester urea) Biodegradable Membrane for Guided Bone Regeneration

Barrier membranes (BM) for guided bone regeneration (GBR) aim to support the osteogenic healing process of a defined bony defect by excluding epithelial (gingival) ingrowth and enabling osteoprogenitor and stem cells to proliferate and differentiate into bone tissue. Currently, the most widely used membranes for these approaches are collagen-derived, and there is a discrepancy in defining the optimal collagen membrane in terms of biocompatibility, strength, and degradation rates. Motivated by these clinical observations, we designed a collagen-free membrane based on l-valine-co-l-phenylalanine-poly(ester urea) (PEU) copolymer via electrospinning. Degradation and mechanical properties of these membranes were performed on as-spun and water-aged samples. Alveolar-bone-derived stem cells (AvBMSCs) were seeded on the PEU BM to assess their cell compatibility and osteogenic characteristics, including cell viability, attachment/spreading, proliferation, and mineralized tissue-associated gene expression. In vivo, PEU BMs were subcutaneously implanted in rats to evaluate their potential to cause inflammatory responses and facilitate angiogenesis. Finally, critical-size calvarial defects and a periodontal model were used to assess the regenerative capacity of the electrospun PEU BM compared to clinically available Cytoflex synthetic membranes. PEU BM demonstrated equal biocompatibility to Cytoflex with superior mechanical performance in strength and elasticity. Additionally, after 14 days, PEU BM exhibited a higher expression of BGLAP/osteocalcin and superior in vivo performance-less inflammation and increased CD31 and VWF expression over time. When placed in critical-sized defects in the calvaria of rats, the PEU BM led to robust bone formation with high expression of osteogenesis and angiogenesis markers. Moreover, our membrane enhanced alveolar bone and cementum regeneration in an established periodontal model after 8 weeks. We demonstrate that the PEU BM exhibits favorable clinical properties, including mechanical stability, cytocompatibility, and facilitated bone formation in vitro and in vivo. This highlights its suitability for GBR in periodontal and craniofacial bone defects.

Collagen and Its Derivatives Serving Biomedical Purposes: A Review

Biomaterials have been the subject of extensive research, and their applications in medicine and pharmacy are expanding rapidly. Collagen and its derivatives stand out as valuable biomaterials due to their high biocompatibility, biodegradability, and lack of toxicity and immunogenicity. This review comprehensively examines collagen from various sources, its extraction and processing methods, and its structural and functional properties. Preserving the native state of collagen is crucial for maintaining its beneficial characteristics. The challenges associated with chemically modifying collagen to tailor its properties for specific clinical needs are also addressed. The review discusses various collagen-based biomaterials, including solutions, hydrogels, powders, sponges, scaffolds, and thin films. These materials have broad applications in regenerative medicine, tissue engineering, drug delivery, and wound healing. Additionally, the review highlights current research trends related to collagen and its derivatives. These trends may significantly influence future developments, such as using collagen-based bioinks for 3D bioprinting or exploring new collagen nanoparticle preparation methods and drug delivery systems.

Barrier Membrane with Janus Function and Structure for Guided Bone Regeneration

Guided bone regeneration (GBR) technology has been demonstrated to be an effective method for reconstructing bone defects. A membrane is used to cover the bone defect to stop soft tissue from growing into it. The biosurface design of the barrier membrane is key to the technology. In this work, an asymmetric functional gradient Janus membrane was designed to address the bidirectional environment of the bone and soft tissue during bone reconstruction. The Janus membrane was simply and efficiently prepared by the multilayer self-assembly technique, and it was divided into the polycaprolactone isolation layer (PCL layer, GBR-A) and the nanohydroxyapatite/polycaprolactone/polyethylene glycol osteogenic layer (HAn/PCL/PEG layer, GBR-B). The morphology, composition, roughness, hydrophilicity, biocompatibility, cell attachment, and osteogenic mineralization ability of the double surfaces of the Janus membrane were systematically evaluated. The GBR-A layer was smooth, dense, and hydrophobic, which could inhibit cell adhesion and resist soft tissue invasion. The GBR-B layer was rough, porous, hydrophilic, and bioactive, promoting cell adhesion, proliferation, matrix mineralization, and expression of alkaline phosphatase and RUNX2. In vitro and in vivo results showed that the membrane could bind tightly to bone, maintain long-term space stability, and significantly promote new bone formation. Moreover, the membrane could fix the bone filling material in the defect for a better healing effect. This work presents a straightforward and viable methodology for the fabrication of GBR membranes with Janus-based bioactive surfaces. This work may provide insights for the design of biomaterial surfaces and treatment of bone defects.

A novel bi-layered asymmetric membrane incorporating demineralized dentin matrix accelerates tissue healing and bone regeneration in a rat skull defect model

Objectives: The technique of guided bone regeneration (GBR) has been widely used in the field of reconstructive dentistry to address hard tissue deficiency. The objective of this research was to manufacture a novel bi-layered asymmetric membrane that incorporates demineralized dentin matrix (DDM), a bioactive bone replacement derived from dentin, in order to achieve both soft tissue isolation and hard tissue regeneration simultaneously. Methods: DDM particles were harvested from healthy, caries-free permanent teeth. The electrospinning technique was utilized to synthesize bi-layered DDM-loaded PLGA/PLA (DPP) membranes. We analyzed the DPP bilayer membranes' surface topography, physicochemical properties and degradation ability. Rat skull critical size defects (CSDs) were constructed to investigate in vivo bone regeneration. Results: The synthesized DPP bilayer membranes possessed suitable surface characteristics, acceptable mechanical properties, good hydrophilicity, favorable apatite forming ability and suitable degradability. Micro-computed tomography (CT) showed significantly more new bone formation in the rat skull defects implanted with the DPP bilayer membranes. Histological evaluation further revealed that the bone was more mature with denser bone trabeculae. In addition, the DPP bilayer membrane significantly promoted the expression of the OCN matrix protein in vivo. Conclusions: The DPP bilayer membranes exhibited remarkable biological safety and osteogenic activity in vivo and showed potential as a prospective candidate for GBR applications in the future.

Collagen-Based Medical Devices for Regenerative Medicine and Tissue Engineering

Assisted reproductive technologies are key to solving the problems of aging and organ defects. Collagen is compatible with living tissues and has many different chemical properties; it has great potential for use in reproductive medicine and the engineering of reproductive tissues. It is a natural substance that has been used a lot in science and medicine. Collagen is a substance that can be obtained from many different animals. It can be made naturally or created using scientific methods. Using pure collagen has some drawbacks regarding its physical and chemical characteristics. Because of this, when collagen is processed in various ways, it can better meet the specific needs as a material for repairing tissues. In simpler terms, collagen can be used to help regenerate bones, cartilage, and skin. It can also be used in cardiovascular repair and other areas. There are different ways to process collagen, such as cross-linking it, making it more structured, adding minerals to it, or using it as a carrier for other substances. All of these methods help advance the field of tissue engineering. This review summarizes and discusses the current progress of collagen-based materials for reproductive medicine.

Evaluation of Porcine Collagen Membranes Used with Guided Bone Regeneration for Critical Defects: A Histological, Histomorphometric, Immunohistochemical, and Inflammatory Profile Analysis

OBJECTIVE

 The objective of this study was to compare the effectiveness of two porcine collagen membranes of different origin used for guided bone regeneration procedures.

MATERIALS AND METHODS

 Resorbable collagen membrane from porcine dermis (Bio-Gide, Geistlich Pharma AG, Wolhusen, Switzerland) and resorbable collagen membrane from porcine pericardium (Jason, Institut Straumann AG, Peter Merian-Weg, Switzerland) were evaluated; histological, histometric, immunohistochemical, and inflammatory profile analyses were performed. The study was carried out on critical defects created in the calvaria of 72 rats (Rattus norvegicus albinus, Wistar variety) divided into three groups: coagulum group (Co), porcine pericardium group (JS), and porcine collagen group (BG). The defects were filled with clot, over which the membranes were placed. The animals were euthanized 7, 15, 30, and 60 days after surgery.

STATISTICAL ANALYSIS

 The Shapiro-Wilk test was used to assess data distribution. Analysis of variance (ANOVA) and the Bonferroni multiple comparison test were used to compare the differences across the mean values of the variables. Nonparametric tests, Mann-Whitney and Wilcoxon W, were used for the quantitative analysis of the inflammatory profile. A significance level of 5% (p < 0.05) was adopted with a confidence interval of 95%. SPSS software version 2.0 was used.

RESULTS

 A total of 1,008 analyses were performed on 288 histological slides. It was noted that both types of collagen membranes used in this study were effective for the guided bone regeneration procedure, with a greater proportion and thickness of bone formation among recipients of the BG (735 points, p = 0.021). This membrane also had greater permeability (62.25). The animals in the JS group, which received the porcine pericardial membrane, showed early and accelerated bone formation from early bone tissue, milder osteopontin and osteocalcin levels, and greater inflammatory reaction (86.4).

CONCLUSION

 The collagen membrane from porcine dermis demonstrated a more orderly and physiological repair process, while the porcine pericardial membrane presented a more accelerated repair process that did not remain constant over time.

A Janus, robust, biodegradable bacterial cellulose/Ti3C2Tx MXene bilayer membranes for guided bone regeneration

Guided bone regeneration (GBR) stands as an essential modality for craniomaxillofacial bone defect repair, yet challenges like mechanical weakness, inappropriate degradability, limited bioactivity, and intricate manufacturing of GBR membranes hindered the clinical efficacy. Herein, we developed a Janus bacterial cellulose(BC)/MXene membrane through a facile vacuum filtration and etching strategy. This Janus membrane displayed an asymmetric bilayer structure with interfacial compatibility, where the dense layer impeded cell invasion and the porous layer maintained stable space for osteogenesis. Incorporating BC with Ti3C2Tx MXene significantly enhanced the mechanical robustness and flexibility of the material, enabling clinical operability and lasting GBR membrane supports. It also contributed to a suitable biodegradation rate, which aligned with the long-term bone repair period. After demonstrating the desirable biocompatibility, barrier role, and osteogenic capability in vitro, the membrane's regenerative potential was also confirmed in a rat cranial defect model. The excellent bone repair performance could be attributed to the osteogenic capability of MXene nanosheets, the morphological cues of the porous layer, as well as the long-lasting, stable regeneration space provided by the GBR membrane. Thus, our work presented a facile, robust, long-lasting, and biodegradable BC/MXene GBR membrane, offering a practical solution to craniomaxillofacial bone defect repair.

All-in-one porous membrane enables full protection in guided bone regeneration

The sophisticated hierarchical structure that precisely combines contradictory mechanical and biological characteristics is ideal for biomaterials, but it is challenging to achieve. Herein, we engineer a spatiotemporally hierarchical guided bone regeneration (GBR) membrane by rational bilayer integration of densely porous N-halamine functionalized bacterial cellulose nanonetwork facing the gingiva and loosely porous chitosan-hydroxyapatite composite micronetwork facing the alveolar bone. Our GBR membrane asymmetrically combine stiffness and flexibility, ingrowth barrier and ingrowth guiding, as well as anti-bacteria and cell-activation. The dense layer has a mechanically matched space maintenance capacity toward gingiva, continuously blocks fibroblasts, and prevents bacterial invasion with multiple mechanisms including release-killing, contact-killing, anti-adhesion, and nanopore-blocking; the loose layer is ultra-soft to conformally cover bone surfaces and defect cavity edges, enables ingrowth of osteogenesis-associated cells, and creates a favorable osteogenic microenvironment. As a result, our all-in-one porous membrane possesses full protective abilities in GBR.

Poly(lactic acid/caprolactone) bilayer membrane achieves bone regeneration through a prolonged barrier function

Guided bone regeneration (GBR) is a treatment strategy used to recover bone volume. Barrier membranes are a key component of GBR protocols, and their properties can impact treatment outcomes. This study investigated the efficacy of an experimental, slow-degrading, bilayer barrier membrane for application in GBR using in vivo animal models. A synthetic copolymer of poly(lactic acid/caprolactone) (PLCL) was used to prepare a slow-degrading bilayer membrane. The biodegradability of PLCL was evaluated by subcutaneous implantation in a rat model. The barrier function of the PLCL membrane was investigated in a rat calvaria defect model and compared with commercially available membranes composed of type I collagen (Col) and poly(lactic-co-glycolic acid) (PLGA). An alveolar bone defect model in beagle dogs was used to simulate GBR protocols to evaluate the bone regeneration ability of the experimental PLCL membrane. The PLCL membrane showed slow biodegradation, resulting in an efficient and prolonged barrier function compared with commercial materials. In turn, this barrier function enabled the space-making ability of PLCL membrane and facilitated bone regeneration. In the alveolar bone defect model, significantly greater regeneration was achieved by treatment with PLCL membrane compared with Col and PLGA membranes. Additionally, a continuous alveolar ridge contour was observed in PLCL-treated bone defects. In conclusion, the PLCL bilayer membrane is a promising biomaterial for use in GBR given its slow degradation and prolonged barrier function.

A bi-layered asymmetric membrane loaded with demineralized dentin matrix for guided bone regeneration

OBJECTIVES

Guided bone regeneration (GBR) is a well-established method for repairing hard tissue deficiency in reconstructive dentistry. The aim of this study was to investigate the barrier function, osteogenic activity and immunomodulatory ability of a novel bi-layered asymmetric membrane loaded with demineralized dentin matrix (DDM).

METHODS

DDM particles were harvested from healthy, caries-free permanent teeth. Electrospinning technique was utilized to prepare bi-layered DDM-loaded poly(lactic-co-glycolic acid) (PLGA)/poly(lactic acid) (PLA) membranes (abbreviated as DPP bilayer membranes). We analyzed the membranes' surface properties, cytocompatibility and barrier function, and evaluated their osteogenic activity in vitro. In addition, its effects on the osteogenic immune microenvironment were also investigated.

RESULTS

Synthetic DPP bilayer membranes presented suitable surface characteristics and satisfactory cytocompatibility. Transwell assays showed significant fewer migrated cells by the DPP bilayer membranes compared with blank control, with or without in vitro degradation (all P < 0.001). In vitro experiments indicated that our product elevated messenger ribonucleic acid (mRNA) expression levels of osteogenic genes alkaline phosphatase (ALP), osteopontin (OPN), osteocalcin (OCN) and runt-related transcription factor 2 (Runx2). Among all groups, 20% DPP bilayer membrane displayed highest ALP activity (P < 0.001). Furthermore, DPP bilayer membranes enhanced the mRNA expression of M2 macrophage markers and increased the proportion of CD206+ M2 macrophages by 100% (20% DPP: P < 0.001; 30% DPP: P < 0.001; 40% DPP: P < 0.05), thus exerting an inflammation suppressive effect.

CONCLUSIONS

DPP bilayer membranes exhibited notable biological safety and osteogenic activity in vitro, and have potential as a prospective candidate for GBR approach in the future.

Ridge preservation in periodontally compromised molar sockets with and without primary wound closure: A comparative controlled clinical trial

OBJECTIVE

This study aimed to compare hard- and soft-tissue changes after ridge preservation in periodontally compromised molar sockets with and without primary wound closure.

MATERIALS AND METHODS

Forty molars with severe periodontitis requiring extraction were included and allocated to two treatment modalities. After tooth extraction, the sockets were filled with deproteinized bovine bone mineral and covered with a bioabsorbable porcine collagen membrane. Primary wound closure was achieved in the control group, whereas the test group underwent minimally invasive open healing. The dimensions of the bone and soft tissue were recorded at baseline and 6 months.

RESULTS

Over 6 months, the control and test groups had similar mean ridge heights at the center of sockets of 8.59 ± 2.47 mm and 8.47 ± 2.51 mm, respectively. The total volume of the control group increased from 1070.17 to 1713.52 mm3 for a mean gain of 643.35 mm3 , whereas that of the test group increased from 992.51 to 1514.05 mm3 for a mean gain of 521.54 mm3 . Compared with the test group, the control group showed a statistically significant decrease in keratinized tissue width of 1.08 ± 1.63 mm.

CONCLUSIONS

Bone dimensional changes following ridge preservation with and without primary wound closure were comparable. ARP without primary wound closure preserves more keratinized tissue than that with (Chinese Clinical Trial Registry: ChiCTR-ONN-16009433).

Barrier membranes for periodontal guided bone regeneration: a potential therapeutic strategy

Periodontal disease is one of the most common oral diseases with the highest incidence world-wide. In particular, the treatment of periodontal bone defects caused by periodontitis has attracted extensive attention. Guided bone regeneration (GBR) has been recognized as advanced treatment techniques for periodontal bone defects. GBR technique relies on the application of barrier membranes to protect the bone defects. The commonly used GBR membranes are resorbable and non-resorbable. Resorbable GBR membranes are divided into natural polymer resorbable membranes and synthetic polymer resorbable membranes. Each has its advantages and disadvantages. The current research focuses on exploring and improving its preparation and application. This review summarizes the recent literature on the application of GBR membranes to promote the regeneration of periodontal bone defects, elaborates on GBR development strategies, specific applications, and the progress of inducing periodontal bone regeneration to provide a theoretical basis and ideas for the future application of GBR membranes to promote the repair of periodontal bone defects.

Apatite-coated outer layer eggshell membrane: A novel osteoinductive biohybrid composite for guided bone/tissue regeneration

Hybrid biomimetic materials aim to replicate the organic-inorganic constructs of mineralized tissues. During eggshell formation, the outer surface of the eggshell membrane (ESM) promotes calcium carbonate nucleation, while the inner one prevents mineralization toward the egg white and yolk. In the current study, the outer surface of the ESM acted as a heteronucleant in calcium phosphate precipitation by the vapor diffusion sitting drop method, while the inner one remained unmineralized. The aim was to fabricate a 2D biomaterial with dual functions, osteoinductive on one side and protective against cell invasion on the other side. The microstructural, physicochemical, morphological, and mechanical properties of the mineralized ESM were characterized by XRD, TGA, XPS, FTIR/Raman, HR-SEM, and mechanical testing techniques. The cytocompatibility and osteoinductive ability were assessed by biological assays of cell viability, proliferation, and osteogenic differentiation on human mesenchymal stromal cells (hMSCs). Results indicate that the outer surface of the ESM induces the heterogeneous precipitation of carbonate-apatite phase depicting biomimetic features. In addition, the apatite/ESM shows a much higher cytocompatibility than the pristine ESM and promotes the osteogenic differentiation of hMSCs more efficiently. Overall, the apatite/ESM composite exhibits compositional, crystalline, mechanical, and biological properties that resemble those of mineralized tissues, rendering it an approachable and novel material especially useful in guided tissue/bone regeneration.

Tailoring the multiscale mechanics of tunable decellularized extracellular matrix (dECM) for wound healing through immunomodulation

With the discovery of the pivotal role of macrophages in tissue regeneration through shaping the tissue immune microenvironment, various immunomodulatory strategies have been proposed to modify traditional biomaterials. Decellularized extracellular matrix (dECM) has been extensively used in the clinical treatment of tissue injury due to its favorable biocompatibility and similarity to the native tissue environment. However, most reported decellularization protocols may cause damage to the native structure of dECM, which undermines its inherent advantages and potential clinical applications. Here, we introduce a mechanically tunable dECM prepared by optimizing the freeze-thaw cycles. We demonstrated that the alteration in micromechanical properties of dECM resulting from the cyclic freeze-thaw process contributes to distinct macrophage-mediated host immune responses to the materials, which are recently recognized to play a pivotal role in determining the outcome of tissue regeneration. Our sequencing data further revealed that the immunomodulatory effect of dECM was induced via the mechnotrasduction pathways in macrophages. Next, we tested the dECM in a rat skin injury model and found an enhanced micromechanical property of dECM achieved with three freeze-thaw cycles significantly promoted the M2 polarization of macrophages, leading to superior wound healing. These findings suggest that the immunomodulatory property of dECM can be efficiently manipulated by tailoring its inherent micromechanical properties during the decellularization process. Therefore, our mechanics-immunomodulation-based strategy provides new insights into the development of advanced biomaterials for wound healing.

Efficacy of biomaterials for lateral bone augmentation performed with guided bone regeneration. A network meta-analysis

Bone regeneration is often required concomitant with implant placement to treat a bone fenestration, a dehiscence, and for contouring. This systematic review assessed the impact of different biomaterials employed for guided bone regeneration (GBR) simultaneous to implant placement on the stability of radiographic peri-implant bone levels at ≥12 months of follow-up (focused question 1), as well as on bone defect dimension (width/height) changes at re-assessment after ≥4 months (focused question 2). Only randomized controlled trials (RCTs) and controlled clinical trials (CCTs) that compared different biomaterials for GBR were considered. A Bayesian network meta-analysis (NMA) was performed using a random-effects model. A ranking probability between treatments was obtained, as well as an estimation of the surface under the cumulative ranking value (SUCRA). Overall, whenever the biological principle of GBR was followed, regeneration occurred in a predictable way, irrespective of the type of biomaterial used. A lower efficacy of GBR treatments was suggested for initially large defects, despite the trend did not reach statistical significance. Regardless of the biomaterial employed, a certain resorption of the augmented bone was observed overtime. While GBR was shown to be a safe and predictable treatment, several complications (including exposure, infection, and soft tissue dehiscence) were reported, which tend to be higher when using cross-linked collagen membranes.

Membrane barriers for guided bone regeneration: An overview of available biomaterials

Dental implants revolutionized the treatment options for restoring form, function, and esthetics when one or more teeth are missing. At sites of insufficient bone, guided bone regeneration (GBR) is performed either prior to or in conjunction with implant placement to achieve a three-dimensional prosthetic-driven implant position. To date, GBR is well documented, widely used, and constitutes a predictable and successful approach for lateral and vertical bone augmentation of atrophic ridges. Evidence suggests that the use of barrier membranes maintains the major biological principles of GBR. Since the material used to construct barrier membranes ultimately dictates its characteristics and its ability to maintain the biological principles of GBR, several materials have been used over time. This review, summarizes the evolution of barrier membranes, focusing on the characteristics, advantages, and disadvantages of available occlusive barrier membranes and presents results of updated meta-analyses focusing on the effects of these membranes on the overall outcome.

Bone regeneration in implant dentistry: Which are the factors affecting the clinical outcome?

The key factors that are needed for bone regeneration to take place include cells (osteoprogenitor and immune-inflammatory cells), a scaffold (blood clot) that facilitates the deposition of the bone matrix, signaling molecules, blood supply, and mechanical stability. However, even when these principles are met, the overall amount of regenerated bone, its stability over time and the incidence of complications may significantly vary. This manuscript provides a critical review on the main local and systemic factors that may have an impact on bone regeneration, trying to focus, whenever possible, on bone regeneration simultaneous to implant placement to treat bone dehiscence/fenestration defects or for bone contouring. In the future, it is likely that bone tissue engineering will change our approach to bone regeneration in implant dentistry by replacing the current biomaterials with osteoinductive scaffolds combined with cells and mechanical/soluble factors and by employing immunomodulatory materials that can both modulate the immune response and control other bone regeneration processes such as osteogenesis, osteoclastogenesis, or inflammation. However, there are currently important knowledge gaps on the biology of osseous formation and on the factors that can influence it that require further investigation. It is recommended that future studies should combine traditional clinical and radiographic assessments with non-invasive imaging and with patient-reported outcome measures. We also envisage that the integration of multi-omics approaches will help uncover the mechanisms responsible for the variability in regenerative outcomes observed in clinical practice.

Physical, mechanical, and biological properties of collagen membranes for guided bone regeneration: a comparative in vitro study

BACKGROUND

To provide a reference for clinical selection of collagen membranes by analyzing the properties of three kinds of collagen membranes widely used in clinics: Bio-Gide membrane from porcine dermis (PD), Heal-All membrane from bovine dermis (BD), and Lyoplant membrane from bovine pericardium (BP).

METHODS

The barrier function of three kinds of collagen membranes were evaluated by testing the surface morphology, mechanical properties, hydrophilicity, and degradation rate of collagen membranes in collagenase and artificial saliva. In addition, the bioactivity of each collagen membrane as well as the proliferation and osteogenesis of MC3T3-E1 cells were evaluated. Mass spectrometry was also used to analyze the degradation products.

RESULTS

The BP membrane had the highest tensile strength and Young's modulus as well as the largest water contact angle. The PD membrane exhibited the highest elongation at break, the smallest water contact angle, and the lowest degradation weight loss. The BD membrane had the highest degradation weight loss, the highest number of proteins in its degradation product, the strongest effect on the proliferation of MC3T3-E1 cells, and the highest expression level of osteogenic genes.

CONCLUSIONS

The PD membrane is the best choice for shaping and maintenance time, while the BD membrane is good for osteogenesis, and the BP membrane is suitable for spatial maintenance. To meet the clinical requirements of guided bone regeneration, using two different kinds of collagen membranes concurrently to exert their respective advantages is an option worth considering.

Doxycycline-doped collagen membranes accelerate in vitro osteoblast proliferation and differentiation

OBJECTIVE

The aim of the study was to evaluate the effect of doxycycline- and dexamethasone-doped collagen membranes on the proliferation and differentiation of osteoblasts.

BACKGROUND

Collagen barrier membranes are frequently used to promote bone regeneration and to boost this biological activity their functionalization with antibacterial and immunomodulatory substances has been suggested.

METHODS

The design included commercially available collagen membranes doped with doxycycline (Dox-Col-M) or dexamethasone (Dex-Col-M), as well as undoped membranes (Col-M) as controls, which were placed in contact with cultured MG63 osteoblast-like cells (ATCC). Cell proliferation was assessed by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium (MTT) assay and differentiation by measuring the alkaline phosphatase (ALP) activity using spectrophotometry. Real-time quantitative polymerase chain reaction was used to study the expression of the genes: Runx-2, OSX, ALP, OSC, OPG, RANKL, Col-I, BMP-2, BMP-7, TGF-β1, VEGF, TGF-βR1, TGF-βR2, and TGF-βR3. Scanning electron microscopy was used to study osteoblast morphology. Data were assessed using one-way analysis of variance or Kruskal-Wallis tests, once their distribution normality was assessed by Kolmogorov-Smirnov tests (p > .05). Bonferroni for multiple comparisons were carried out (p < .05).

RESULTS

Osteoblast proliferation was significantly enhanced in the functionalized membranes as follows: (Col-M < Dex-Col-M < Dox-Col-M). ALP activity was significantly higher on cultured osteoblasts on Dox-Col-M. Runx-2, OSX, ALP, OSC, BMP-2, BMP-7, TGF-β1, VEGF, TGF-βR1, TGF-βR2, and TGF-βR3 were overexpressed, and RANKL was down-regulated in osteoblasts cultured on Dox-Col-M. The osteoblasts cultured in contact with the functionalized membranes demonstrated an elongated spindle-shaped morphology.

CONCLUSION

The functionalization of collagen membranes with Dox promoted an increase in the proliferation and differentiation of osteoblasts.

Evaluation of efficacy of non-resorbable membranes compared to resorbable membranes in patients undergoing guided bone regeneration

Background

Replacement of missing teeth in patients with prolonged edentulism poses a challenge for clinicians. An extended period of edentulism results in severe atrophy of alveolar ridges rendering them unsatisfactory for rehabilitation using an implant-supported prosthesis. To overcome this difficulty, Guided Bone Regeneration (GBR) was introduced and constructed upon the principles of Guided Tissue Regeneration (GTR) procedures. Evidence suggests that GBR has proven to be a predictable treatment modality for treating vertical and horizontal ridge deficiencies.

Objective

The present systematic review aimed to evaluate the efficacy of non-resorbable (N-RES) membranes compared to resorbable (RES) membranes in patients undergoing GBR.

Methods

An electronic search of three databases, including PubMed, Web of Science, and Scopus, was conducted for articles published until March 2022. A supplementary manual search of references from these articles was performed to include any articles that may have been overlooked in the electronic search. Articles that evaluated the efficacy of RES membranes and N-RES membranes in GBR were included. Case reports, case series, commentaries, letters to the editor, narrative or systematic reviews were excluded. Articles in languages other than English were also excluded. The articles were assessed against risk of bias 2 tool for Randomized Control Trials (RCTs) and ROBINS-I tool for Non-Randomized Clinical Trials (N-RCTs). The Grading of Recommendations Assessment, Development and Evaluation (GRADE) assessment was followed based on the Cochrane Handbook for quality assessment. A summary of findings table was used to present the results.

Results

One hundred and fifty one articles were identified in an electronic search. Eight articles met the inclusion criteria and were included in the present systematic review. The studies were conducted on partially or completely edentulous patients with alveolar ridge deficiencies undergoing vertical or horizontal bone for subsequent implant placement. The majority of the studies reported similar results for bone gain in both RES and N-RES membrane groups.

Conclusion

The available evidence suggests that RES and N-RES membranes are equally effective in GBR. However, the evidence must be interpreted with caution due to its 'low quality' GRADE assessment.

Clinical implications

Further research focusing on human clinical trials with well-matched subjects with homogeneity in the type and method of GBR and method of assessment of new bone formation will derive conclusive results on the efficacy of RES and N-RES membranes in achieving new bone formation.

Modulation of the biophysical and biochemical properties of collagen by glycation for tissue engineering applications

The structural and functional properties of collagen are modulated by the presence of intramolecular and intermolecular crosslinks. Advanced Glycation End-products (AGEs) can produce intermolecular crosslinks by bonding the free amino groups of neighbouring proteins. In this research, the following hypothesis is explored: The accumulation of AGEs in collagen decreases its proteolytic degradation rates while increasing its stiffness. Fluorescence Lifetime Imaging (FLIM) and Fourier-transform infrared spectroscopy (FTIR) detect biochemical changes in collagen scaffolds during the glycation process. The accumulation of AGEs increases exponentially in the collagen scaffolds as a function of Methylglyoxal (MGO) concentration by performing autofluorescence measurement and competitive ELISA. Glycated scaffolds absorb water at a much higher rate confirming the direct affinity between AGEs and interstitial water within collagen fibrils. In addition, the topology of collagen fibrils as observed by Atomic Force Microscopy (AFM) is a lot more defined following glycation. The elastic modulus of collagen fibrils decreases as a function of glycation, whereas the elastic modulus of collagen scaffolds increases. Finally, the enzymatic degradation of collagen by bacterial collagenase shows a sigmoidal pattern with a much slower degradation rate in the glycated scaffolds. This study identifies unique variations in the properties of collagen following the accumulation of AGEs. STATEMENT OF SIGNIFICANCE: In humans, Advanced Glycation End-products (AGEs) are naturally produced as a result of aging process. There is an evident lack of knowledge in the basic science literature explaining the biomechanical impact of AGE-mediated crosslinks on the functional and structural properties of collagen at both the nanoscale (single fibrils) and mesoscale (bundles of fibrils). This research, demonstrates how it is possible to harness this natural phenomenon in vitro to enhance the properties of engineered collagen fibrils and scaffolds. This study identifies unique variations in the properties of collagen at nanoscale and mesoscale following accumulation of AGEs. In their approach, they investigate the unique properties conferred to collagen, namely enhanced water sorption, differential elastic modulus, and finally sigmoidal proteolytic degradation behavior.

Analysis of the biocompatibility of a biocelulose and a poly L- lactic acid membrane

The use of selective barriers as resorbable membranes has become a routine clinical procedure for guided bone regeneration. Therefore, the production of membranes with a low inflammatory potential during their resorption process has become the goal of a considerable number of researches. Aim: The purpose of the present study was to evaluate the biocompatibility of poly (L- lactic acid) (PLLA) and biocelulose membranes (BC) inserted in the subcutaneous tissue on the dorsum of rats. Methods: Fifteen animals underwent surgical procedures for the insertion of 4 types of membranes: COL (Collagen membrane) – Control Group; BC (Biocellulose membrane); BCAg (Biocellulose membrane impregnated with Silver); PLLA (Poly (L-lactic acid) membrane). All membrane types were inserted into each animal. Animals were euthanized after 3, 7, and 15 days of the surgical procedure. Descriptive histological analyses were carried out to investigate host tissue reaction to membrane presence by assessing the anti-inflammatory process composition associated with the membrane resorption and the presence of foreign-body reaction or encapsulation. Results: The BC membranes showed a higher degree of inflammation and poor pattern of integration with the surrounding tissues than the PLLA and COL membranes. Conclusion: The PLLA and COL membranes present better biocompatibility than the BC membranes.

Photocrosslinkable Col/PCL/Mg composite membrane providing spatiotemporal maintenance and positive osteogenetic effects during guided bone regeneration

Guided bone regeneration membranes have been effectively applied in oral implantology to repair bone defects. However, typical resorbable membranes composed of collagen (Col) have insufficient mechanical properties and high degradation rate, while non-resorbable membranes need secondary surgery. Herein, we designed a photocrosslinkable collagen/polycaprolactone methacryloyl/magnesium (Col/PCLMA/Mg) composite membrane that provided spatiotemporal support effect after photocrosslinking. Magnesium particles were added to the PCLMA solution and Col/PCLMA and Col/PCLMA/Mg membranes were developed; Col membranes and PCL membranes were used as controls. After photocrosslinking, an interpenetrating polymer network was observed by scanning electron microscopy (SEM) in Col/PCL and Col/PCL/Mg membranes. The elastic modulus, swelling behavior, cytotoxicity, cell attachment, and cell proliferation of the membranes were evaluated. Degradation behavior in vivo and in vitro was monitored according to mass change and by SEM. The membranes were implanted into calvarial bone defects of rats for 8 weeks. The Col/PCL and Col/PCL/Mg membranes displayed much higher elastic modulus (p < 0.05), and a lower swelling rate (p < 0.05), than Col membranes, and there were no differences in cell biocompatibility among groups (p > 0.05). The Col/PCL and Col/PCL/Mg membranes had lower degradation rates than the Col membranes, both in vivo and in vitro (p < 0.05). The Col/PCL/Mg groups showed enhanced osteogenic capability compared with the Col groups at week 8 (p < 0.05). The Col/PCL/Mg composite membrane represents a new strategy to display space maintenance and enhance osteogenic potential, which meets clinical needs.

•

Photocrosslinked Col/PCL and Col/PCL/Mg membranes displayed good mechanical support to provide space for bone regeneration.

•

Col/PCL and Col/PCL/Mg membranes had suitable degradation rates for the maintenance duration of bone regeneration.

•

Photocrosslinked Col/PCL/Mg membranes enhanced osteogenesis and expedited the formation of high-quality bone on week 8.

Effects on Tissue Integration of Collagen Scaffolds Used for Local Delivery of Gentamicin in a Rat Mandible Defect Model

Surgical site infections (SSIs) are a common complication following orthopedic surgery. SSIs may occur secondary to traumatic or contaminated wounds or may result from invasive procedures. The development of biofilms is often associated with implanted materials used to stabilize injuries and to facilitate healing. Regardless of the source, SSIs can be challenging to treat. This has led to the development of devices that act simultaneously as local antibiotic delivery vehicles and as scaffolds for tissue regeneration. The goal for the aforementioned devices is to increase local drug concentration in order to enhance bactericidal activity while reducing the risk of systemic side effects and toxicity from the administered drug. The aims of this study were to assess the effect of antibiotic loading of a collagen matrix on the tissue integration of the matrix using a rat mandibular defect model. We hypothesized that the collagen matrix could load and elute gentamicin, that the collagen matrix would be cytocompatible in vitro, and that the local delivery of a high dose of gentamicin via loaded collagen matrix would negatively impact the tissue–scaffold interface. The results indicate that the collagen matrix could load and elute the antimicrobial gentamicin and that it was cytocompatible in vitro with or without the presence of gentamicin and found no significant impact on the tissue–scaffold interface when the device was loaded with a high dose of gentamicin.

Alveolar Ridge Preservation with Guided Bone Regeneration or Socket Seal Technique. A Randomised, Single-Blind Controlled Clinical Trial

Objectives

To compare radiographic bone changes, following alveolar ridge preservation (ARP) using Guided Bone Regeneration (GBR), a Socket Seal (SS) technique or unassisted socket healing (Control).

Material and methods

Patients requiring a single rooted tooth extraction in the anterior maxilla, were randomly allocated into: GBR, SS and Control groups (n= 14/). Cone Beam Computed Tomography (CBCT) images were recorded post‐extraction and at 4 months, the mid‐buccal and mid‐palatal alveolar ridge heights (BARH/PARH) were measured. The alveolar ridge width, cross‐sectional socket and alveolar‐process area changes, implant placement feasibility, requirement for bone augmentation and post‐surgical complications were also recorded.

Results

BARH and PARH was found to increase with the SS (0.65 mm ± 1.1/0.65 mm ± 1.42) techniques, stabilise with GBR (0.07 mm ± 0.83/0.86 mm ±1.37) and decrease in the Control (−0.52 mm ± 0.8/−0.43 mm ± 0.83). Statistically significance was found when comparing the GBR and SS BARH (p = .04/.005) and GBR PARH (p = .02) against the Control. GBR recorded the smallest reduction in alveolar ridge width (−2.17 mm ± 0.84), when compared to the Control (−2.3 mm ± 1.11) (p = .89). A mid‐socket cross‐sectional area reduction of 4% (−2.27 mm² ± 11.89), 1% (−0.88 mm² ± 15.48) and 13% (−6.93 mm² ± 8.22) was found with GBR, SS and Control groups (GBR vs. Control p = .01). The equivalent alveolar process area reduction was 8% (−7.36 mm² ± 10.45), 6% (−7 mm² ± 18.97) and 11% (−11.32 mm² ± 10.92). All groups supported implant placement, with bone dehiscence noted in 57% (n = 4), 64%(n = 7) and 85%(n = 12) of GBR, SS and Control cases (GBR vs. Control p = .03). GBR had a higher risk of swelling and mucosal colour change, with SS associated with graft sequestration and matrix breakdown.

Conclusion

GBR ARP was found to be more effective at reducing radiographic bone dimensional changes following tooth extraction.

A long-lasting guided bone regeneration membrane from sequentially functionalised photoactive atelocollagen

The fast degradation of collagen-based membranes in the biological environment remains a critical challenge, resulting in underperforming Guided Bone Regeneration (GBR) therapy leading to compromised clinical results. Photoactive atelocollagen (AC) systems functionalised with ethylenically unsaturated monomers, such as 4-vinylbenzyl chloride (4VBC), have been shown to generate mechanically competent materials for wound healing, inflammation control and drug delivery, whereby control of the molecular architecture of the AC network is key. Building on this platform, the sequential functionalisation with 4VBC and methacrylic anhydride (MA) was hypothesised to generate UV-cured AC hydrogels with reduced swelling ratio, increased proteolytic stability and barrier functionality for GBR therapy. The sequentially functionalised atelocollagen precursor (SAP) was characterised via TNBS and ninhydrin colourimetric assays, circular dichroism and UV-curing rheometry, which confirmed nearly complete consumption of collagen's primary amino groups, preserved triple helices and fast (< 180 s) gelation kinetics, respectively. Hydrogel's swelling ratio and compression modulus were adjusted depending on the aqueous environment used for UV-curing, whilst the sequential functionalisation of AC successfully generated hydrogels with superior proteolytic stability in vitro compared to both 4VBC-functionalised control and the commercial dental membrane Bio-Gide®. These in vitro results were confirmed in vivo via both subcutaneous implantation and a proof-of-concept study in a GBR calvarial model, indicating integrity of the hydrogel and barrier defect, as well as tissue formation following 1-month implantation in rats. STATEMENT OF SIGNIFICANCE: Collagen-based membranes remain a key component in Guided Bone Regeneration (GBR) therapy, but their properties, e.g. proteolytic stability and soft tissue barrier functionality, are still far from optimal. This is largely attributed to the complex molecular configuration of collagen, which makes chemical accessibility and structure-function relations challenging. Here, we fabricated a UV-cured hydrogel network of atelocollagen, whereby triple helices were sequentially functionalised with two distinct ethylenically unsaturated monomers. The effects of the sequential functionalisation and UV-curing on the macroscopic properties, degradation behaviour and GBR capability were investigated in vitro and in vivo. The results highlight the key role of the sequential functionalisation and provide important insights for the design of future, longer-lasting resorbable membranes for GBR therapy.

Different angiogenic response and bone regeneration following the use of various types of collagen membranes - in vivo histomorphometric study in rabbit calvarial critical-size defects

Introduction/Objective. Success of guided bone regeneration depends on the size and morphology of defect, characteristics of barrier membranes and adequate angiogenesis. The aim of the study was to reveal impact of three different collagen membranes on angiogenesis and bone production in critical-size defects. Methods. Defects were created in rabbit calvarias, filled with bovine bone graft and randomly covered with one of three investigated collagen membranes (Biogide ? BG, Heart ? PC, Mucograft ? MG) or left without a membrane for the control group (C). After two and four weeks of healing, a total of 10 animals were sacrificed for histological and histomorphometric analysis of angiogenesis, bone regeneration, and inflammatory response. Results. In the early healing phase, the highest values of trabecular thickness and trabecular area were recorded with PC and BG membranes, respectively. After four weeks, significantly improved bone healing was noted in the MG group, as well as significantly pronounced inflammation. Initially, vessel density was significantly higher in the C group compared to all three membranes. After four weeks, significantly better results were observed in the MG compared to the other groups, BG compared to the rest of groups, and between PC and C groups. Conclusion. The use of collagen membranes significantly affects angiogenesis, reducing it in the early and enhancing it at the later healing phase. All three tested membranes in combination with bone graft significantly improved the amount of regenerated bone. Among the investigated groups, MG favored more pronounced angiogenic, osteogenic, and inflammatory response in the observation period of four weeks.

Cross-linked hyaluronic acid slows down collagen membrane resorption in diabetic rats through reducing the number of macrophages

OBJECTIVES

We previously showed that accelerated degradation of collagen membranes (CMs) in diabetic rats is associated with increased infiltration of macrophages and blood vessels. Since pre-implantation immersion of CMs in cross-linked high molecular weight hyaluronic acid (CLHA) delays membrane degradation, we evaluated here its effect on the number of macrophages and endothelial cells (ECs) within the CM as a possible mechanism for inhibition of CM resorption.

MATERIALS AND METHODS

Diabetes was induced with streptozotocin in 16 rats, while 16 healthy rats served as control. CM discs were labeled with biotin, soaked in CLHA or PBS, and implanted under the scalp. Fourteen days later, CMs were embedded in paraffin and the number of macrophages and ECs within the CMs was determined using antibodies against CD68 and transglutaminase II, respectively.

RESULTS

Diabetes increased the number of macrophages and ECs within the CMs (∼2.5-fold and fourfold, respectively). Immersion of CMs in CLHA statistically significantly reduced the number of macrophages (p < 0.0001) in diabetic rats, but not that of ECs. In the healthy group, CLHA had no significant effect on the number of either cells. Higher residual collagen area and membrane thickness in CLHA-treated CMs in diabetic animals were significantly correlated with reduced number of macrophages but not ECs.

CONCLUSIONS

Immersion of CM in CLHA inhibits macrophage infiltration and reduces CM degradation in diabetic animals.

CLINICAL RELEVANCE

The combination of CLHA and CM may represent a valuable approach when guided tissue regeneration or guided bone regeneration procedures are performed in diabetic patients.

Multifunctional chitin-based barrier membrane with antibacterial and osteogenic activities for the treatment of periodontal disease

The guided tissue regeneration technique is an effective approach to repair periodontal defect. However, collagen barrier membranes used clinically lose stability easily, leading to soft tissue invasion, surgical site infection, and failure of osteogenesis. An ideal barrier membrane should possess proper antibacterial, osteoconductive activities, and favorable biodegradation. In this study, zinc oxide nanoparticles were homogeneously incorporated into the chitin hydrogel (ChT-1%ZnO) through one-step dissolution and regeneration method from alkaline/urea solution the first time. The remaining weights of ChT-1%ZnO in 150 μg/mL lysozyme solution was 52% after 5 weeks soaking. ChT-1%ZnO showed statistical antibacterial activities for P. gingivalis and S. aureus at 6 h, 12 h, and 24 h. Moreover, ChT-1%ZnO exhibits osteogenesis promotion in vitro, and it was further evaluated with rat periodontal defect model in vivo. The cemento-enamel junction value in ChT-1%ZnO group is 1.608 mm, presenting a statistical difference compared with no-membrane (1.825 mm) and ChT group (1.685 mm) after 8 weeks postoperatively.

The Collagen Origin Influences the Degradation Kinetics of Guided Bone Regeneration Membranes

Collagen membranes are currently the most widely used membranes for guided bone regeneration; however, their rapid degradation kinetics means that the barrier function may not remain for enough time to permit tissue regeneration to happen. The origin of collagen may have an important effect on the resistance to degradation. The aim of this study was to investigate the biodegradation pattern of five collagen membranes from different origins: Biocollagen, Heart, Evolution X-fine, CopiOs and Parasorb Resodont. Membranes samples were submitted to different degradation tests: (1) hydrolytic degradation in phosphate buffer saline solution, (2) bacterial collagenase from Clostridium histolyticum solution, and (3) enzyme resistance using a 0.25% porcine trypsin solution. Immersion periods from 1 up to 50 days were performed. At each time point, thickness and weight measurements were performed with a digital caliper and an analytic microbalance, respectively. ANOVA and Student–Newman–Keuls tests were used for comparisons (p < 0.05). Differences between time-points within the same membranes and solutions were assessed by pair-wise comparisons (p < 0.001). The Evolution X-fine collagen membrane from porcine pericardium attained the highest resistance to all of the degradation tests. Biocollagen and Parasorb Resodont, both from equine origin, experienced the greatest degradation when immersed in PBS, trypsin and C. histolyticum during challenge tests. The bacterial collagenase solution was shown to be the most aggressive testing method.

Improvement of Mechanical Strength of Tissue Engineering Scaffold Due to the Temperature Control of Polymer Blend Solution

Polymeric scaffolds made of PCL/PLCL (ratio 1:3, respectively) blends have been developed by using the Thermally Induced Phase Separation (TIPS) process. A new additional technique has been introduced in this study by applying pre-heat treatment to the blend solution before the TIPS process. The main objective of this study is to evaluate the influence of the pre-heat treatment on mechanical properties. The mechanical evaluation showed that the mechanical strength of the scaffolds (including tensile strength, elastic modulus, and strain) improved as the temperature of the polymer blend solution increased. The effects on the microstructure features were also observed, such as increasing strut size and differences in phase separation morphology. Those microstructure changes due to temperature control contributed to the increasing of mechanical strength. The in vitro cell study showed that the PCL/PLCL blend scaffold exhibited better cytocompatibility than the neat PCL scaffold, indicated by a higher proliferation at 4 and 7 days in culture. This study highlighted that the improvement of the mechanical strength of polymer blends scaffolds can be achieved using a very versatile way by controlling the temperature of the polymer blend solution before the TIPS process.

In Vitro Biodegradation Pattern of Collagen Matrices for Soft Tissue Augmentation

Collagen matrices have become a great alternative to the use of connective tissue grafts for soft tissue augmentation procedures. One of the main problems with these matrices is their volume instability and rapid degradation. This study has been designed with the objective of examining the degradation of three matrices over time. For this purpose, pieces of 10 × 10 mm² of Fibro-Gide, Mucograft and Mucoderm were submitted to three different degradation tests-(1) hydrolytic degradation in phosphate buffer solution (PBS); (2) enzyme resistance, using a 0.25% porcine trypsin solution; and (3) bacterial collagenase resistance (Clostridium histolyticum)-over different immersion periods of up to 50 days. Weight measurements were performed with an analytic microbalance. Thickness was measured with a digital caliper. A stereomicroscope was used to obtain the matrices' images. ANOVA and Student-Newman-Keuls tests were used for mean comparisons (p < 0.05), except when analyzing differences between time-points within the same matrix and solution, where pair-wise comparisons were applied (p < 0.001). Fibro-Gide attained the highest resistance to all degradation challenges. The bacterial collagenase solution was shown to constitute the most aggressive test as all matrices presented 100% degradation before 14 days of storage.

Horizontal Ridge Augmentation: A Comparison between Khoury and Urban Technique

PURPOSE

The objective of this systematic review was to evaluate and compare the clinical efficacy of horizontal alveolar ridge augmentation techniques described by Khoury and Urban.

METHODS

A systematic electronic search in the MEDLINE databases, SCOPUS, WOS, and the Cochrane Central Register of Controlled Trials (CENTRAL) as well as a manual search, were conducted independently by two reviewers up to July 2021.

RESULTS

Six studies met the pre-established inclusion criteria and were included in the descriptive analysis. Due to the heterogeneity found across the included studies, meta-analysis could not be performed. Horizontal bone gain was between 3.93 ± 0.9 mm and 5.02 ± 0.8 mm with the Khoury technique and between 3.9 ± 0.9 mm and 5.68 ± 1.42 mm with the Urban technique. Similar complication rates were reported in both groups: infection (7%), in the Khoury technique, and membrane exposure (3.2-13.6%), in the Urban technique, being the most frequent events.

CONCLUSIONS

Both techniques were found to be effective, in terms of clinical bone gain, for horizontal alveolar ridge gain. Nevertheless, available literature is limited, and there is a lack of comparative studies to better evaluate the results.

Polybutylene-adipate-terephthalate and niobium-containing bioactive glasses composites: Development of barrier membranes with adjusted properties for guided bone regeneration

This study aimed to develop bioactive guided bone regeneration (GBR) membranes by manufacturing PBAT/BAGNb composites as casting films. Composites were produced by melt-extrusion, and BAGNb was added at 10 wt%, 20 wt%, and 30 wt% concentration. Pure PBAT membranes were used as a control (0wt%BAGNb). FTIR and thermogravimetric analysis characterized the composites. Barrier membranes were produced by solvent casting, and their mechanical and surface properties were assessed by tensile strength test and contact angle analysis, respectively. The ion release and cell behavior were evaluated by pH, cell proliferation, and mineralization. Composites were successfully produced, and the chemical structure showed no interference of BAGNb in the PBAT structure. The addition of BAGNb increased the stiffness of the membranes and reduced the contact angle, increasing the roughness in one side of the membrane. Sustained pH increment was observed for BAGNb-containing membranes with increased proliferation and mineralization as the concentration of BAGNb increases. The incorporation of up to 30 wt% of BAGNb into PBAT barrier membranes was able to maintain adequate chemical-mechanical properties leading to the production of materials with tailored surface properties and bioactivity. Finally, this biomaterial class showed outstanding potential and may contribute to bone formation in GBR procedures.

Alveolar Bone Ridge Augmentation Using Polymeric Membranes: A Systematic Review and Meta-Analysis

Alveolar bone ridge resorption occurred after natural teeth loss and it can restrict the possibility of dental implants placement. The use of bone regenerative procedures is frequently required. The existing evidence regarding the efficacy of horizontal bone ridge augmentation trough guided bone regeneration (GBR) using polymeric membranes was stated. A systematic review and meta-analysis were performed. Electronic and manual literature searches were conducted. Screening process was done using the National Library of Medicine (MEDLINE by PubMed), Embase, and the Cochrane Oral Health. Included articles were randomized controlled trials and observational studies. Weighted means were calculated. Heterogeneity was determined using Higgins (I2). If I2 > 50% a random-effects model was applied. It was found that the mean of horizontal bone gain was 3.95 mm, ranging from 3.19 to 4.70 mm (confidence interval 95%). Heterogeneity is I2 = 99% (confidence interval 95%) and significance of the random-effects model was p < 0.001. The complications rate was 8.4% and membrane exposure was the most frequent. Through this study, we were able to conclude that the existing scientific evidence suggests that GBR using polymeric membranes is a predictable technique for achieving horizontal bone augmentation, thus, permitting a proper further implant placement.

Proteomic Analysis of Porcine-Derived Collagen Membrane and Matrix

Collagen membranes and matrices being widely used in guided bone regeneration and soft tissue augmentation have characteristic properties based on their composition. The respective proteomic signatures have not been identified. Here, we performed a high-resolution shotgun proteomic analysis on two porcine collagen-based biomaterials designed for guided bone regeneration and soft tissue augmentation. Three lots each of a porcine-derived collagen membrane and a matrix derived from peritoneum and/or skin were digested and separated by nano-reverse-phase high-performance liquid chromatography. The peptides were subjected to mass spectrometric detection and analysis. A total of 37 proteins identified by two peptides were present in all collagen membranes and matrices, with 11 and 16 proteins being exclusively present in the membrane and matrix, respectively. The common extracellular matrix proteins include fibrillar collagens (COL1A1, COL1A2, COL2A1, COL3A1, COL5A1, COL5A2, COL5A3, COL11A2), non-fibrillar collagens (COL4A2, COL6A1, COL6A2, COL6A3, COL7A1, COL16A1, COL22A1), and leucine-rich repeat proteoglycans (DCN, LUM, BGN, PRELP, OGN). The structural proteins vimentin, actin-based microfilaments (ACTB), annexins (ANXA1, ANXA5), tubulins (TUBA1B, TUBB), and histones (H2A, H2B, H4) were also identified. Examples of membrane-only proteins are COL12A1 and COL14A1, and, of matrix only proteins, elastin (ELN). The proteomic signature thus revealed the similarities between but also some individual proteins of collagen membrane and matrix.

Short time guided bone regeneration using beta-tricalcium phosphate with and without fibronectin - An experimental study in rats

Background

 The aim of this histomorphometric study was to assess the bone regeneration potential of beta-tricalcium phosphate with fibronectin (β-TCP-Fn) in critical-sized defects (CSDs) in rats calvarial, to know whether Fn improves the new bone formation in a short time scope.

Material and Methods

 CSDs were created in 30 Sprague Dawley rats, and divided into four groups (2 or 6 weeks of healing) and type of filling (β-TCP-Fn, β-TCP, empty control). Variables studied were augmented area (AA), gained tissue (GT), mineralized/non mineralized bone matrix (MBM/NMT) and bone substitute (BS).

Results

60 samples at 2 and six weeks were evaluated. AA was higher for treatment groups comparing to controls (p < 0.001) and significant decrease in BS area in the β-TCP-Fn group from 2 to 6 weeks (p = 0.031). GT was higher in the β-TCP-Fn group than in the controls expressed in % (p = 0.028) and in mm2 (p = 0.011), specially at two weeks (p=0.056).

Conclusions

 Both β-TCP biomaterials are effective as compared with bone defects left empty in maintaining the volume. GT in defects regeneration filed with β-TCP-Fn are significantly better in short healing time when comparing with controls but not for β-TCP used alone in rats calvarial CSDs.

Key words:Bone regeneration, biomaterials, experimental design, histology.

Differential Biodegradation Kinetics of Collagen Membranes for Bone Regeneration

Native collagen-based membranes are used to guide bone regeneration; but due to their rapid biodegradation, this treatment is often unpredictable. The purpose of this study was to investigate the biodegradability of natural collagen membranes. Three non-cross-linked resorbable collagen barrier membranes were tested: Derma Fina (porcine dermis), Evolution Standard (equine pericardium) and Duo-Teck (equine lyophilized collagen felt). 10 × 10 mm² pieces of membranes were submitted to three different degradation procedures: (1) hydrolytic degradation in phosphate buffer solution, (2) enzyme resistance, using a 0.25% porcine trypsin solution, and (3) bacterial (Clostridium histolyticum) collagenase resistance test. Weight measurements were performed with an analytic microbalance. Thickness was measured with a digital caliper. Membranes were analyzed at different time-points, up to 21 d of immersion. A stereomicroscope was used to obtain membranes’ images. ANOVA and Student Newman Keuls were used for mean comparisons (p < 0.05), except when analyzing differences between time-points within the same membrane and solution where pair-wise comparisons were applied (p < 0.001). Derma Fina attained the highest resistance to all degradation challenges. Duo-Teck was the most susceptible membrane to degradation, complete degradation occurred as soon as 8 h. The bacterial collagenase solution performed as the most aggressive test as all membranes presented 100% degradation before 21 d.

Accelerated degradation of collagen membranes in type 1 diabetic rats is associated with increased expression and production of several inflammatory molecules

BACKGROUND

Membrane durability is critical for regenerative procedures. We reported previously that type 1-like diabetes in rats accelerates the degradation of collagen membranes and we tested here whether this is associated with increased local production of inflammatory molecules as part of a diabetes-induced chronic inflammation around and within the membranes.

METHODS

Collagen membrane discs were implanted under the scalp in diabetic (streptozotocin-induced) and control rats, which were sacrificed after 2 or 3 weeks. Total RNA and proteins were isolated from the membrane and its surrounding tissues and the expression and production of six inflammatory molecules (interleukin-6 [IL-6], tumor necrosis factor alpha [TNFα], matrix metalloproteinase [MMP]-9, macrophage migration inhibitory factor [MIF], MIP-1α, and MIP-2α) was measured using real-time PCR and western blotting, respectively. Minimal histological analysis of the membranes was conducted to conform to previous studies.

RESULTS

Hyperglycemia resulted in reduced membrane thickness (by 10% to 25%) and increased mononuclear infiltrate inside the membrane. mRNA and protein levels of IL-6, TNFα, and MMP-9 were elevated in diabetic rats both 2 and 3 weeks post-surgery. The levels (both mRNA and protein) of MIF were increased at 2 weeks post-surgery and those of MIP-1α and MIP-2α at 3 weeks. There was a very good match in the temporal changes of all examined genes between the mRNA and protein levels.

CONCLUSIONS

Elevated local production of inflammatory cytokines and MMPs, together with apparent mononuclear infiltrate and increased collagenolysis confirm that hyperglycemia leads to a chronic inflammation in and around the implanted collagen membranes, which reduces membrane longevity.

Selection of Collagen Membranes for Bone Regeneration: A Literature Review

Several treatment modalities have been proposed to regenerate bone, including guided bone regeneration (GBR) where barrier membranes play an important role by isolating soft tissue and allowing bone to grow. Not all membranes biologically behave the same way, as they differ from their origin and structure, with reflections on their mechanical properties and on their clinical performance. Collagen membranes have been widely used in medicine and dentistry, because of their high biocompatibility and capability of promoting wound healing. Recently, collagen membranes have been applied in guided bone regeneration with comparable outcomes to non-resorbable membranes. Aim of this work is to provide a review on the main features, application, outcomes, and clinical employment of the different types of collagen membranes. Comparisons with non-resorbable membranes are clarified, characteristics of cross-linked collagen versus native collagen, use of different grafting materials and need for membrane fixation are explored in order to gain awareness of the indications and limits and to be able to choose the right membrane required by the clinical condition.

Histological Evaluation of a New Beta-Tricalcium Phosphate/Hydroxyapatite/Poly (1-Lactide-Co-Caprolactone) Composite Biomaterial in the Inflammatory Process and Repair of Critical Bone Defects

Background: The use of biomaterials is commonplace in dentistry for bone regeneration. The aim of this study was to evaluate the performance of a new alloplastic material for bone repair in critical defects and to evaluate the extent of the inflammatory process. Methods: Forty-five New Zealand rabbits were divided into five groups according to evaluation time (7, 14, 30, 60, 120 days), totaling 180 sites with six-millimeter diameter defects in their tibiae. The defects were filled with alloplastic material consisting of poly (lactide-co-caprolactone), beta-tricalcium phosphate, hydroxyapatite and nano-hydroxyapatite (BTPHP) in three different presentations: paste, block, and membrane. Comparisons were established with reference materials, such as Bio-ossTM, Bio-oss CollagenTM, and Bio-gideTM, respectively. The samples were HE-stained and evaluated for inflammatory infiltrate (scored for intensity from 0 to 3) and the presence of newly formed bone at the periphery of the defects. Results: Greater bone formation was observed for the alloplastic material and equivalent inflammatory intensity for both materials, regardless of evaluation time. At 30 days, part of the synthetic biomaterial, regardless of the presentation, was resorbed. Conclusions: We concluded that this novel alloplastic material showed osteoconductive potential, biocompatibility, low inflammatory response, and gradual resorption, thus an alternative strategy for guided bone regeneration.

Ridge preservation in molar extraction sites with an open-healing approach: A randomized controlled clinical trial

AIM

To determine the effect of alveolar ridge preservation (ARP) in molar sites without primary flap closure.

MATERIALS AND METHODS

Three groups were established: extraction sockets grafted with deproteinized bovine bone mineral containing 10% collagen (DBBM-C) and covered by a native bilayer collagen membrane (NBCM) (test group 1), sockets grafted with DBBM-C only (test group 2), and sockets that healed naturally (control group). Primary flap closure was not attempted. Conebeam computed tomography scans were obtained immediately and then 4 months after ARP. A biopsy was performed. The change of the marginal bone level was measured.

RESULTS

There was significantly less horizontal resorption in test group 1 than in the control group at levels 1 mm (-1.02 ± 0.88 [mean ± SD] vs. -4.44 ± 3.71 mm) and 3 mm (-0.31 ± 1.51 vs. -2.27 ± 1.15 mm) below the crest, and significantly less vertical reduction in the midcrestal area in test group 1 than in test group 2 (-0.25 ± 0.95 vs. -1.15 ± 1.63 mm) (p < .05). There were no significant differences between test groups in clinical and histomorphometric measurements. All groups exhibited stable marginal bone levels after 1 year of loading.

CONCLUSION

Alveolar ridge preservation without primary flap closure in molar areas was effective in minimizing ridge resorption and facilitated implant treatment.

Barrier membranes: More than the barrier effect?

AIM

To review the knowledge on the mechanisms controlling membrane-host interactions in guided bone regeneration (GBR) and investigate the possible role of GBR membranes as bioactive compartments in addition to their established role as barriers.

MATERIALS AND METHODS

A narrative review was utilized based on in vitro, in vivo and available clinical studies on the cellular and molecular mechanisms underlying GBR and the possible bioactive role of membranes.

RESULTS

Emerging data demonstrate that the membrane contributes bioactively to the regeneration of underlying defects. The cellular and molecular activities in the membrane are intimately linked to the promoted bone regeneration in the underlying defect. Along with the native bioactivity of GBR membranes, incorporating growth factors and cells in membranes or with graft materials may augment the regenerative processes in underlying defects.

CONCLUSION

In parallel with its barrier function, the membrane plays an active role in hosting and modulating the molecular activities of the membrane-associated cells during GBR. The biological events in the membrane are linked to the bone regenerative and remodelling processes in the underlying defect. Furthermore, the bone-promoting environments in the two compartments can likely be boosted by strategies targeting both material aspects of the membrane and host tissue responses.

Avaliação da combinação de poli (ácido láctico-co-glicólico) e poli-isopreno (Cellprene®): estudo histológico em ratos

Resumo Introdução A quantidade e qualidade óssea na implantodontia é um fator de alta relevância quando se tem por objetivo instalar implantes e reabilitar pacientes. No entanto, essa disponibilidade é comprometida na maioria dos casos, havendo a necessidade da busca de novos biomateriais, membranas e substâncias para uma regeneração mais favorável. Objetivo: O objetivo deste estudo foi avaliar a resposta da neoformação óssea em defeitos críticos em calvárias de ratos utilizando scaffolds de fibras de blenda polimérica a partir de poli (ácido láctico-co-glicólico) e poli-isopreno (Cellprene®). O projeto foi aprovado pelo Comitê de Ética em Experimentação Animal. Material e método Neste estudo, foram utilizados 36 ratos (Rattus Norvegicus), variação albinus, Holtzman, adultos. Os animais foram submetidos à tricotomia na região da calota craniana e à confecção de defeitos ósseos circulares bilaterais com 5 mm de diâmetro. Os animais foram divididos em três grupos: GC – defeito sem colocação de biomaterial; GCol – scaffolds de colágeno (Bio-Gide, da empresa Geistlich Pharma Ag – Biomaterials); GPoli – scaffolds de fibras de blenda polimérica a partir de poli (ácido láctico-co-glicólico - Cellprene®). Cada grupo foi avaliado em quatro períodos experimentais (7, 15, 30 e 60 dias). Após esses períodos, os animais foram sacrificados, e as peças passaram por tramitação laboratorial de rotina e inclusão em parafina. Foram obtidos cortes semisseriados e corados pela técnica de hematoxilina e eosina para análise histométrica e histológica. Foi executada análise histométrica para avaliar a composição do tecido ósseo reparado (% osso). Os dados obtidos foram analisados estatisticamente com nível de significância de 95%. Resultado Foi verificado que o GCol apresentou maior preenchimento do defeito nos períodos de 30 e 60 dias em comparação aos GC e GPoli. Conclusão Os scaffolds de fibras de blenda polimérica a partir de poli (ácido láctico-co-glicólico) e poli-isopreno (Cellprene®) não apresentaram vantagens quando utilizados em defeitos críticos.

Monomer-Induced Customization of UV-Cured Atelocollagen Hydrogel Networks

The covalent functionalization of type I atelocollagen with either 4-vinylbenzyl or methacrylamide residues is presented as a simple synthetic strategy to achieve customizable, cell-friendly UV-cured hydrogel networks with widespread clinical applicability. Molecular parameters, i.e., the type of monomer, degree of atelocollagen functionalization and UV-curing solution, have been systematically varied and their effect on gelation kinetics, swelling behavior, elastic properties, and enzymatic degradability investigated. UV-cured hydrogel networks deriving from atelocollagen precursors functionalized with equivalent molar content of 4-vinylbenzyl (F 4VBC = 18 ± 1 mol.%) and methacrylamide (F MA = 19 ± 2 mol.%) adducts proved to display remarkably-different swelling ratio (SR = 1963 ± 58-5202 ± 401 wt.%), storage modulus (G' = 17 ± 3-390 ± 99 Pa) and collagenase resistance (μ rel = 18 ± 5-56 ± 5 wt.%), similarly to the case of UV-cured hydrogel networks obtained with the same type of methacrylamide adduct, but varied degree of functionalization (F MA = 19 ± 2 - 88 ± 1 mol.%). UV-induced network formation of 4VBC-functionalized atelocollagen molecules yielded hydrogels with increased stiffness and enzymatic stability, attributed to the molecular rigidity of resulting aromatized crosslinking segment, whilst no toxic response was observed with osteosarcoma G292 cells. Although to a lesser extent, the pH of the UV-curing solution also proved to affect macroscopic hydrogel properties, likely due to the altered organization of atelocollagen molecules during network formation. By leveraging the knowledge gained with classic synthetic networks, this study highlights how the type of monomer can be conveniently exploited to realize customizable atelocollagen hydrogels for personalized medicine, whereby the structure-property relationships can be controlled to meet the requirements of unmet clinical applications.